4 X Tct Shaper Cutter Molder Spindle Moulder 5 X Tct Wood Shaper Molder 1 X Tct Tct Sawblades Shaper Cutter Set 3 X Tct Moulder Head Shopsmith Mark V Model 500 Shopsmith Mark V Model 2 X Tct Sawblades 2-Shopsmith Mark Freeborn Furniture Manufacturing Cope And Pattern Cope Pattern Pocket Moulder Head Freeborn Cope Shaper Cutter Head 2 X Pcd Wood Shaper Shaper Cutter 1 1 4 Bore Shaper Cutter For 1 2' Spindle Raised Panel Shaper Cutter Shopsmith 12 Shaper Set Of Two Stile Rail Shaper Cutter 3 4 Shaper Head Tpi As Photo Shaper Cutter 3 4 Bore Used Shaper Cutters Wood Shaper Cutter Radius Shaper Cutter Vintage Delta Rockwell Three-Wing Shaper Cutter 6 X Tct Shopsmith Mark 5 Carbide Shaper Cutter Cutter 1-1 4 Bore Dado Arbor Doweling Jig Shopsmith 1 2 Shopsmith Disc Spindle Shaper 4 X Tct Sawblades Molding Knives Shopsmith Mark V 3 Shopsmith Magna Shaper Cutter 1-1 4 1-13 16 Bore 500 Arbor Shaper Cutter 1 2 Shopsmith 5 8 Dovetail Jig Leuco Topline Shopsmith Mark V Headstock Steel 12 Sanding Disc Shopsmith 1 Router Cutter Sanding Disc 510 520 Arbor Freeborn Tool Edge Shaper Shaper 1 2 Lrh Cutter Shopsmith Molder Dado Arbor Shaper Collar Tenon Jig Dust Collection Amana Tool Wood Shaper Molder Corrugated Blade Rub Collar Kreg 1 X Pcd Shopsmith Mv Dowel Drill 5 X Tct Sawblades Leitz Tct 2 X Disposable Dowl Jig Thread Chasers Dust Hose Shaper Cutter 1 Dowel Jig 500 Table Pocket Hole Raised Panel Rip Fence Pair Of Thread Chasers Pocket Hole Jig International Shaper Cutter 3 4 Hole Rockwell International Shaper Cutter 3 4 Stuart Batty Rockler Miter Gauge Incra Tongue And Groove Power Coupler Router Chuck Model 510 Incra Jig Drum Sander Mortising Attachment Disposable Blade Sears Shaper Cutter For 1 2' Cutter Block Dado Blade Ø5-7 8 Edge Bander Moisture Meter Shopsmith Vintage Mark 1 2 Spindle Multi Router Jds Drill Jig Glue Joint Quarter Round Carbide Blade Tct Sawblades 250 Woodworking Shaper Magic Molder Industrial Quality 1-1 4 Wood Shaper Cutters Carbide Tip Shaper Cutter Mortising Bit Six Pocket Drill Guide Tct Sawblades 200 5 8 Arbor Ss Blade Blast Gate 500 Steel Tct Sawblades 300 Shop Smith 1 2 Bushing Table Insert Shaper Cutter Sets Wings Carbide Oliver Lathe Shop Fox Tct Router Knife Sets Pocket Hole Machine Tct Saw Blade Template And Router Edgebander Used Edgebander Carbide Tip Tct Sawblades 150 1 1 4' 1 1 4 Arbor 1 1 4 Bore 1 1 4 Boring 1 2 Bore 1 2 Diameter 1 2 Router 1 4 Round 1-1 2 1-1 4 2 Bore 2 Hp 2 Inches 2 X Pcd Router Cutter Woodworking 2 X Pcd Router Woodworking Tool 3 4 Bore 3 4 Boring 3 Blade 3 Phase 3 Wings 4 Bore 4 Boring 4 Diameter 4 Inches 5 Hp 600 Grit Sanding Disc 8 Bore 8 Lath Toolrest Band Saw Belt Sander Bit Sets Black Decker Blade Router Cutter Woodworking Tool Bore 1 1 4' Cabinet Doors Carbide 3 Cast Iron Circle Cnc Cnc Router Cutter 1 Cutter Head Cutters Delta 34-569 Miter Gauge Clamp Delta Rockwell Doors Edge Drill Bit Drill Chuck
 In 
 
Order by: 
Available to: 
Price: 
 - 
This site contains affiliate links for which I may be compensated
$
275.63
Buy It Now
Free Shipping
Condition: Used
Location: Rosedale, United States
It shows wear from normal use and storage. We are here to help! Model#:unknown. 2 = Poor-Fair.
$
295.00
Buy It Now
$13.55 Shipping
Condition: Used
Location: Prescott, United States
Almost all of my pieces are handmade, so they will not be perfect. If an item is improperly described it would not be intentional. 2.7" Dia (69mm) Bottom ... moreTapered to 2" on top. 46" (11.88mm).
$
80.00
Buy It Now
Free Shipping
Condition: Used
Location: Raymond, United States
4” lockedge steel shaper/moulder blanks. Make your own knives. Both pieces have a profile lightly scratched on the back and 1 piece has a small cut into ... morethat should not be a problem for 95% of the profiles you would grind onto these.Both pieces are 5” long. 4” lockedge steel is over $400 a stick. These account for almost half of a 25” stick.
$
212.01
Buy It Now
Free Shipping
Condition: New
Location: China
$
73.00
Buy It Now
Free Shipping
Condition: Used
Location: Lexington, United States
LRH Raised Panel moulding shaper cutter 1" Arbor Bore Carbide woodworking USA. J971551. Auction find. History unknown. Item is in good pre-owned condition. ... moreIf you need any other photos or measurements, please message me.
$
126.81
Buy It Now
Free Shipping
Condition: New
Location: Cedarhurst, United States
'V' Paneling is a quick and easy way to add architectural detail to any room. V Paneling 2-Piece Shaper Cutter Set. Shaper Cutters. WARNING : Drilling, ... moresawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to causecancer.
$
45.00
Buy It Now
$7.50 Shipping
Condition: Used
Location: Phoenix, United States
1/2" radius opening width. Never been sharpened.
$
129.00
Buy It Now
$8.98 Shipping
Condition: New
Location: Tracy, United States
Cutter BodyAluminum. RPM8,500-12,000. t15mm (19/32). (B) Cutting Height40mm (1-1/2). (d) Bore1-1/4.
$
400.00
Buy It Now
$78.23 Shipping
Condition: Used
Location: Seattle, United States
8 1/8" D x 2 9/16" cut x 1 1/4" bore. Caride thickness. 135". There is a minor nick in one of the CCW cutter than will grind out with the next sharpening.
$
300.00
Buy It Now
$38.15 Shipping
Condition: Used
Location: Seattle, United States
Sharpened, protective coating removed for pictures.
$
195.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Bayonne, United States
6-Piece Door Panel Cope & Pattern Shaper Cutter Set. (3342)You are purchasing what is shown in photos only. All photos are of the actual product(s) you ... morewill receive and are intended to help describe the quality and condition of the piece(s).
$
38.99
Buy It Now
Free Shipping
Condition: Used
Location: Enfield, United States
Delta 43-042 Rail for Concave Style Carbide Tipped Shaper Cutter 1 1/4th Hole.
$
99.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Jeromesville, United States
Woodcraft Ogee 143107 Shaper Cutter.fits 3/4"&1/2" spindle. New unused
$
51.88
Buy It Now
Free Shipping
Condition: New – Open box
Location: Layton, United States
$
18.99
Buy It Now
$6.99 Shipping
Condition: New
Location: Nampa, United States
IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
$
18.99
Buy It Now
$5.99 Shipping
Condition: New
Location: Nampa, United States
IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
$
25.00
Buy It Now
$5.00 Shipping
Condition: Used
Location: Dennis, United States
Delta Rockwell Shaper Cutter / Bit HSS, 1/2" Bore, D-107 09-107
$
149.00
6d 17h 40m 20s
0 bids
$13.95 Shipping
Condition: New
Location: Spokane, United States
Freeborn custom raised panel shaper cutter. From a cancelled custom order.
$
69.97
Buy It Now
Free Shipping
Condition: New
Location: Wittmann, United States
Condition is New.
$
25.00
Buy It Now
$5.00 Shipping
Condition: Used
Location: Dennis, United States
Delta Rockwell Shaper Cutter / Bit HSS, 1/2" Bore, D-214 09-214
$
25.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: Washburn, United States
SY industrial part # C2159 ¾ ” bore woodworking shaper cutter.
$
12.85
Buy It Now
$10.61 Shipping
Condition: New
Location: Wayland, United States
2 Required Per Cutter. Each item number consists of one of each.
$
45.00
6d 17h 40m 21s
0 bids
$13.95 Shipping
Condition: Used
Location: Spokane, United States
1 ¼" bore. straight ¼" groover.runs true but needs sharpening. Otherwise good cutter head 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-14776370a3d-0x118-
$
45.00
Buy It Now
$5.00 Shipping
Condition: Used
Location: Dennis, United States
Delta Rockwell Shaper Cutter / Bit HSS, 1/2" Bore, D-238 09-238
$
99.00
Buy It Now
$3.95 Shipping
Condition: New
Location: Tracy, United States
Reversible Stile & Rail Shaper Cutter. Shaper cutter is reversible to make both stile & rail cuts. One - Rub collar ball bearing. AMANA TOOL. Tool No.SC577. ... more(d) Bore1/2 & 3/4.
$
598.00
Buy It Now
$19.95 Shipping
Condition: New
Location: Tracy, United States
Versatile and easy to use. This set can do all 3 profiles shown This set cuts 1/4" wide x 3/8" deep tongue and groove Counterclockwise rotation ... morewith wood feed face down. 3 wing 4" diameter 1 1/4" bore Can be run on 1" arbor with bushings( not included) Carbide Tipped PC10 010 This set is new in its original container with full warranty PME Distributors. LLC(888)344 5545 FREEBORN authorized Dealer
$
240.00
Buy It Now
$35.48 Shipping
Condition: Used
Location: Seattle, United States
Sharpened, protective coating removed for pictures.
$
102.00
Buy It Now
Free Shipping
Condition: New
Location: Ellicott City, United States
Huge LRH Clearance Sale Now! Call Dave at 410-465-6209 for current inventory list while supplies last! Download PDF Price List! List Price: $156 K-1401 ... moreConvex Radius Diameter(D) 2-5/8" Radius(R) 1/8" Width(W) 1/4" Bore 3/4" Bearing- C-885 carbide tipped New in packaging balanced and verified 100% American Made 1 lb Useful in other woodworking applications. Product Guarantee LRH cutters are guaranteed against defects in workmanship. Materials, and performance provided the tool has not been incorrectly applied or misused. www.O ellaSawAndTool.com Why do the same customers keep coming back? Besides excellent sharp tooling at unbelievable prices. Our shipping department is.well magical, Their philosophy is simple, pack well, combine tools, use only the best services US priority mail or Fed Ex and never charge a handling fee. When you integrate this philosophy with the open box program, you get a customer for life! FREE Open Box Program. Frequently Asked Questions 1. Can you explain the program? Oella Saw and Tool came up with the program in April 2007 to further reduce our already reasonable shipping charges for our international clients. It basically allows you to optimize the weight limits of the US Postal Service's flat rate box program by holding the box until it has reached the 20 pound limit. This may take 1 night of auction purchases or a few weeks. There is no restrictions to the amount of time you need. If you are building your tooling investment and want to carefully select one or two pieces over a month you may do so. Once the box is full. We will ship immediately and notify you with a tracking number. You may at any time request to ship your item(s) at any time regardless of how full the box may be at the time of your request 2. How does it work? It is simple. At checkout pay for your item(s) and flat rate box* Indicate in the paypal payment or through an email"hold open box. Your item will be safely stored in your personal box until the shipping day. If you have not paid and
$
154.48
Buy It Now
Free Shipping
Condition: Used
Location: Kansas City, United States
LRH K-1428 Concave Carbide Shaper Cutter Molder 3/4" Deep Radius. 1 1/2" Radius Opening, 2 1/4" OA Opening Width 1 1/4" Spindle Visit ... moreMy Store! I Combine Shipping! If you purchase more than one item from my store. I will give you a discounted shipping rate. Contact me for details. I can Expedite your item! If you prefer Priority Shipping, contact me! Please note: I do not guarantee fitment of items! You assume ownership& responsibility by purchasing an item. Be sure you know what you're purchasing. I only guarantee the model number as provided by the factory. If you purchase an item that does not fit your application, I cannot give you a refund. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14432b00509-0x105-
$
18.99
Buy It Now
$5.99 Shipping
Condition: New
Location: Nampa, United States
IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
$
18.99
Buy It Now
$5.99 Shipping
Condition: New
Location: Nampa, United States
IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
$
18.99
Buy It Now
$5.99 Shipping
Condition: New
Location: Nampa, United States
IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
$
100.00
Buy It Now
$23.65 Shipping
Condition: Used
Location: Seattle, United States
# 2-360-OT1. Great used condition.
$
60.00
Buy It Now
$17.25 Shipping
Condition: Used
Location: Howell, United States
This cutter shapes the continuous pull profile used on doors. See the sketch above. Custom made.
$
90.00
Buy It Now
$15.07 Shipping
Condition: Used
Location: Seattle, United States
Whitehill Spindle Shaper Cutter Block/Cutter Head.
$
71.23
Buy It Now
Free Shipping
Condition: New
Location: Cedarhurst, United States
Reversible Stile & Rail Shaper Cutter - Beveled Shaper cutter is reversible to make both stile & rail cuts. Shaper Cutters. Saw Blades. Main Image Caption. ... moreTool No.SC587. Our philosophy is to make lives simpler by solving problems.
$
21.75
Buy It Now
Free Shipping
Condition: New
Location: Belleville, United States
This is a pair of new shaper T-bushings. Bushes your 1-1/4" bore shaper cutter down to 3/4" These have the short flange and will work on any ... more3/4" spindle. Shipping on this item is free via USPS or UPS. I do combine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country.
$
95.00
Buy It Now
Free Shipping
Condition: New
Location: Harrisonville, United States
Shelf location tool A.
$
18.99
Buy It Now
$5.99 Shipping
Condition: New
Location: Nampa, United States
IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
$
18.99
Buy It Now
$5.99 Shipping
Condition: New
Location: Nampa, United States
IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
$
90.00
Buy It Now
$15.07 Shipping
Condition: Used
Location: Seattle, United States
Whitehill Spindle Shaper Cutter Block/Cutter Head.
$
100.00
Buy It Now
$17.52 Shipping
Condition: Used
Location: Seattle, United States
# 2-360-OT3. Great used condition. Similar to cutter #110.
$
88.00
Buy It Now
Free Shipping
Condition: New
Location: Tracy, United States
Reversible Stile& Rail Shaper Cutter- Simple Ogee style Shaper cutter is reversible to make both stile& rail cuts. Cutters feature precision ground ... moreindustrial grade carbide for premium cutting results 3-Wing- Rub collar ball bearing Industrial quality Reversible Versatile and easy to use. This set can do profile shown 3 wing 2 13/32" diameter 3/4" bore Can be run on 1/2" arbor with bushings( included) Carbide Tipped This set is new in its original container with full warranty PME Distributors. LLC(888)344 5545 AMANA TOOL authorized Dealer
$
125.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: Littleton, United States
Tantung Tipped Corner Rounding. 1 1/4 bore. Very good condition.
$
19.95
Buy It Now
$4.00 Shipping
Condition: Used
Location: Oshkosh, United States
This is a used Craftsman Sears Shaper Cutter with a 1/2" spindle and a 1/2" quarter round HSS blade. The model number is 93285 and it was manufactured ... morein the United States. This product is designed for woodworking and is categorized under "Other Woodworking Supplies."
$
120.00
Buy It Now
$20.30 Shipping
Condition: Used
Location: Howell, United States
Diamond tipped Ogee and Rabbet shaper cutter. 4 1/8 inch overall diameter, 1 1/4 inch high, 3/4 inch bore. There are some very small nicks (they are too ... moresmall to be called chips) on the bottom portion of the cutter that cuts the rabbet. They do not affect the operation of the door. The shape that is cut is pictured above. Comes in a latch locked wooden box which is pictured. Shipping in the continental United States only.
$
50.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Raymond, United States
Used 1/8” Round over cutter. Bar moulding cutter. Large cutter in Excellent condition. Three wing. 1 1/4” Bore. Large crown cutter. Very sharp. 1 1/2”cutter ... moreheight. Approximately 1” crown Profile or bar rail.
$
45.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Enfield, United States
Delta 43-014 - Cabinet LH Male Carbide Tipped Shaper Cutter 1 1/4th Hole 1 Bush.
$
180.00
Buy It Now
$21.39 Shipping
Condition: Used
Location: Seattle, United States
Freshly sharpened, protective material removed for pictures.
$
320.00
Buy It Now
$52.42 Shipping
Condition: Used
Location: Seattle, United States
Massive cutter weighs 27 lbs. This is the largest/heaviest shaper cutter I've ever seen.
$
75.00
Buy It Now
Free Shipping
Condition: Used
Location: Lexington, United States
Raised Panel moulding shaper cutter 1 1/4" Arbor Bore Carbide woodworking USA. FC 24920. Auction find. History unknown. Item does not appear to be used. ... moreStill has Rubber coating on cutting tips. Item is in good pre-owned condition. If you need any other photos or measurements, please message me.
$
43.54
Buy It Now
$14.78 Shipping
Condition: New
Location: Cedarhurst, United States
Shaper Cutters. Straight Edge Shaper Cutters. Saw Blades. Main Image Caption. Tool No.SC673. Our philosophy is to make lives simpler by solving problems. ... moreCNC Insert Tooling. Hand Tools.
$
27.23
Buy It Now
$10.61 Shipping
Condition: New
Location: Wayland, United States
(Rub collar only.). Features a steel ball bearing center and interchangeable, lightweight aluminum rub collar sleeves. The bearing includes a special ... moresteel retaining collar that properly secures the assembly to your spindle (3/4," 1," 1-1/4" or 30mm).
$
16.00
Buy It Now
$9.50 Shipping
Condition: Used
Location: Algonquin, United States
To all prospective bidders. Please read the following description in its entirety and any previously answered questions before placing a bid. A Rockwell ... more43-905 carbide tipped shaper cutter with 3/4" hole and 1. 1/2" bushing, in very good used condition, two facets are chipped, basically in the same place, looks like a staple or something small was hit. P lease take time to look over the photos thoroughly. As they are as important as all these words I’m laying down.As I guarantee my items to be as pictured and or described. In addition. PLEASE ask questions before placing your bid. I will do my best to answer quickly, accurately and honestly. THE NOT SO FINE PRINT: I expect payment to be made within 48 hours of the auctions ending. Unless arrangements have been made prior to closing. I ship to PAYPAL CONFIRMED ADDRESSES ONLY; it will ship well packed in an appropriate box with insurance and tracking. A signature will be required at delivery. Winning bidder will have 3 days from receipt to inspect it and notify me of any issues; returns will be accepted only if the item is not as described or pictured. The bidder will be responsible for return shipping in the same manner and condition in which it was received and originally shipped. I will ship via USPS or UPS only. This item is being offered to US and Canadian bidders only. International Bidders Please Read Carefully* make sure you know your shipping cost before placing a bid. USPS Priority mail IS NOT an acceptable shipping method for this item outside the USA. Should you win the auction. Please do not ask me to mark as a gift with altered value, as any insurance claims would cover the declared value only, not to mention it is against eBay policy and against international trade laws. So please be prepared to pay customs and or duties on the full purchase amount. GOOD LUCK and HAPPY BIDDING
$
11.65
Buy It Now
$7.00 Shipping
Condition: Used
Location: Kissimmee, United States
You get the cutter that you see; we're cleaning out our parts bins.
$
280.00
Buy It Now
$30.94 Shipping
Condition: Used
Location: Seattle, United States
Demp's Crown Rake Moulder Shaper Cutter. Note there is a chip of of one knife that will grind out with the next sharpening.
$
129.00
Buy It Now
$5.00 Shipping
Condition: New – Open box
Location: Helena, United States
I DO NOT ALLOW LOCAL PICKUP, UNLESS PREARRANGED. WHAT YOU SEE IN MY UPLOADED PICTURES IS EXACTLY WHAT YOU WILL RECEIVE. It is very hard to undo that task.
$
30.00
Buy It Now
$13.60 Shipping
Condition: Used
Location: Howell, United States
$
18.99
Buy It Now
$5.99 Shipping
Condition: New
Location: Nampa, United States
IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
$
18.99
Buy It Now
$5.99 Shipping
Condition: New
Location: Nampa, United States
IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
1 SHAPER CUTTER CARBIDE 3 WING 1" bore MOLDER WOOD WORKING ROUTER 01P2
1 SHAPER CUTTER CARBIDE 3 WING 1" bore MOLDER WOOD WORKING ROUTER 01P2 Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 513 W 1# f11 Here is a used older Carbide SHAPER CUTTER. It is a 3 WING model with a 1" bore. Carbide is about.125 thick where I can measure it. They should be sharpened and that will take out some of the edge imperfections. This has been sitting for a spell in the garage. Enlarge the photos for inspection and general idea of what you are getting. The photographs in this listing show everything which is included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently ... moreTuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction. We accept payment via Paypal only. In accordance with ebay regulations. Payment is expected within 3 days. EBAY forwards all sales information. Therefore, California State Sales Taxes are collected and forwarded to the state of California; the rate is 8 75% DO NOT DUPLICATE OR COPY!
Shaper Cutter N1943-- 3P, 1/2. Carbide Tipped 2" Bore with Keyway Four Wings
Four Winged ~ Very Little Use if any. 2 Inch Bore with internal parallel keyway. Something Left Behind By Uncle Who Was In The Woodworking Business.
1/2" bore HSS shaper cutter Tongue & Groove set (Delta , Craftsman, Shop Smith)
Used HSS 1/2" bore shaper cutter Tongue& Groove Set No markings as to manufacturer so they could be Craftsman. Shop Smith or Corab Cutters PayPal only US shipping only Please ask all questions before bidding. Payment due in 3 days from end of auction or non payment complaint will be filed with Ebay I DO NOT ship on Saturdays
Delta 1/2" bore HSS shaper cutter D-135 (Delta , Craftsman, Shop Smith)
Used Delta HSS 1/2" bore shaper cutter Number D-135 cove& bead This cutter could use some sharpening. PayPal only US shipping only Please ask all questions before bidding. Payment due in 3 days from end of auction or non payment complaint will be filed with Ebay I DO NOT ship on Saturdays
LRH K-1439 shaper cutter 1-1/2" R MADE IN THE USA Fast Shipping
L.H.R. MADE IN THE USA K 1439 1 1/2R Cutter is in overall good used condition. Contains normal wear/tear for a pre-owned cutter. Still has very sharp blades. If you have any questions please feel free to ask. FAST SHIPPING Paypal is my preferred method of payment. If this is an auction listed item. Payment must be paid in full within three business days. Once payment is received in full your item will ship out via USPS(2-5 days) Other options are available at buyers request, if so, buyer to pay additional shipping costs. Please note- shipping is done MONDAY- FRIDAY ONLY. If for some reason you are not satisfied with your purchase. Please contact me BEFORE leaving negative feedback. I am certain we can work something out. I strive to keep my customers happy. Returns are accepted on this item within 14 days and buyer pays return shipping. There ... morewill be a 10% restocking fee on any returned item. Please contact seller BEFORE returning any item. Item must be returned in same condition as you received it in. E3
Shaper Cutter Molder 1-1/2" Stock Detail Cutter 1-1/4" Bore Used Sharpened
Shaper Cutter Molder 1-1/2" Stock Detail Cutter 1-1/4" Bore Used Sharpened Sorry. This photo gallery requires that the Adobe Flash Player be installed. Freshly Sharpened Shaper Cutter Molder 1-1/2" Stock Detail Cutter. 1-1/4" Bore. 5-3/4" diameter. All international buyers. Please include a phone number with your shipping information. This greatly facilitates the shipping process. PLEASE NOTE- CUSTOMS FEES, IMPORT TAXES, VAT, CUSTOM CLEARANCE FEES are not collected by the seller. International buyers are responsible for paying customs taxes to their own country's custom's officials. Please write with any questions about shipping charges or customs fees. In the case of a return, buyers must request a refund of customs fees/clearance fees from their own country. We do not cover this expense. Paypal or OTHER. ... moreThank you for your cooperation. Payment is expected within THREE days of the end of the auction listing. COMBINED SHIPPING: We can combine shipping on a maximum of five items which close within a four-day period. Please contact us to let us know if you will be purchasing more than one item. Payment for all items is expected by the seventh day if multiple items are purchased. International Buyers: Please do not ask that we ship your item with a reduced declared value in order to avoid VAT or customs fees in your country. Also. Please do not ask that we ship your item as a GIFT. We are not able to do this due to both legal and ethical reasons. All international purchases will be shipped with the correct customs information. All international purchases will have two copies of the sales invoice, as required by both US Trade regulations and international customs. This is the best practice to ensure that your item reaches you safely and without any extra delays. If you do not wish to have your item shipped with it's true value and full-value insurance, please do not purchase or bid. Thank you for your understanding. Please note that shipping charges include profesional packing in
Shaper cutter molder carbide tipped 1/4" Convex Radius x 1/2" Width x 3/4" bore
Shaper cutter molder carbide tipped 1/4" Convex Radius. 1/2 Width, 3/4" Bore, 2-5/8" Diameter Sharpened and honed. Ready to work. Diameter: 2-5/8" Radius: 1/4" Width: 1/2" Bore 3/4" Carbide tipped, Used both now sharpened and honed. Ready to work. Balanced and verified, 100% American Made, Useful in other woodworking applications. Included: 1pc Thanks for taking the time to look at our item.
FREUD 3 WING SLOT CUTTING SHAPER CUTTER - 1 1/4" BORE, 4 1/2" DIAMETER - CARBIDE
Carbide tipped. Cuts a 5/16" groove. I will gladly ship multiple items together as long as it is safe to do so.
FREUD CARBIDE TIPPED SLOT CUTTTING SHAPER CUTTER - 1 1/4" BORE, 4" DIAMETER
3/8" slot. I will gladly ship multiple items together as long as it is safe to do so.
FREUD 7/16" SLOT CARBIDE TIPPED SHAPER CUTTER - 1 1/4" BORE - 3 7/8" DIAMETER
6 staggered tips. I will gladly ship multiple items together as long as it is safe to do so.
JEPSON PANEL RAISING SHAPER CUTTER - 1 1/4" BORE - SWEEPING ARC DETAIL -CARBIDE
Carbide tipped. I will gladly ship multiple items together as long as it is safe to do so.
LEITZ UNIVERSAL SAFETY SHAPER CUTTER SET WITH 13 FOUR KNIFE SETS - 1 1/4" BORE
Model 1488/1494. I will gladly ship multiple items together as long as it is safe to do so.
ADVANTAGE 1/8" TRIPLE FLUTE SHAPER CUTTER - 3/4" BORE WITH 1/2" BUSHINGS
I will gladly ship multiple items together as long as it is safe to do so.
JEPSON HORIZONTAL PANEL RAISING SHAPER CUTTER - 1 1/4" BORE - CARBIDE TIPPED
Cuts an angle with a bead detail. I will gladly ship multiple items together as long as it is safe to do so.
BOBS SAW STA-3-1/4 SHAPER CUTTER, 5-1/2" DIAMETER.MADE IN ISRAEL.QUALITY CUTTER
This is a quality Made in Israel.Bob's Saw STA 3-1/4"Shaper cutter in good used condition.In diameter it measures 5-1/2" around and the shaft to nut is 2 1/2" long.get this now for quality cutting. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14c0b6cf9ff-0x11e-