|
CARBOLOY COOLANT FED INDEXABLE THREADING / BORING BAR W/ 1-3/4" SHANK & INSERTS
aims CARBOLOY COOLANT FED INDEXABLE THREADING/ BORING BAR W/ 1-3/4" SHANK& INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Carboloy. This is an Coolant Fed Indexable Threading/ Boring Bar with 3 Inserts in good condition. Model# SI-MVLNL-28-3H Specifications: Current Bore Diameter: 2.123" Shank: 1-3/4" Overall Length: 14-3/4" Come as shown in pictures. Check out the photos! if you have any other questions. Give ... moreus a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CARBOLOY COOLANT FED INDEXABLE THREADING/ BORING BAR W/ 1-3/4" SHANK& INSERTS CARBOLOY COOLANT FED INDEXABLE THREADING/ BORING BAR W/ 1-3/4" SHANK& INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
TRW INDEXABLE THREADING / BORING BAR W/ 1-1/4" SHANK & 3 INSERTS
aims TRW INDEXABLE THREADING/ BORING BAR W/ 1-1/4" SHANK& 3 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by TRW. This is an Indexable Threading/ Boring Bar with 3 Inserts in good condition. Model# S-CTFPR-20-3 Specifications: Current Bore Diameter: 1.370" Shank: 1-1/4" Overall Length: 14" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently ... morehas a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TRW INDEXABLE THREADING/ BORING BAR W/ 1-1/4" SHANK& 3 INSERTS TRW INDEXABLE THREADING/ BORING BAR W/ 1-1/4" SHANK& 3 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
3" Adjustable Boring Head Bar 3/4" Shank 3 Set Wrenches for Bridgeport Mil Bonus
3" Adjustable Boreing Head with 3 Set Screw Wrenches& Bonus 6 Bit Screw Driver Description: This is a nice used adjustable Boring Head that includes 3 Set Screw Wrenches for adjusting and locking in your 1/2" boring bar. Condition: Excellent Used Condition Auction Includes: Adjustable Boring Head 3 Set Screw Wrenches Bonus 6 Bit Screw Driver Shipping Same Day to the US $10.00
|
|
|
1-3/4" KENNAMETAL S28-DTFNR3 INDEXABLE BORING BAR
1-3/4" KENNAMETAL INDEXABLE BORING BAR PART NO. S28-DTFNR3 14" OVERALL LENGTH Very good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, or PayPal accepted. $11.50 for USPS Priority Mail shipping with delivery confirmation. STOCK#BB1214 Thanks for looking!
|
|
|
VINTAGE 1940s LUCAS HORIZONTAL BORING MILLS BROCHURES #460, #348, #41 3"/4" *3*
7 DAY AUCTION! 1947 LUCAS HORIZ BORING MILLS BROCHURES 3 PCS#41 3" SPINDLE HIGH SPEED#348 3" SPINDLE HIGH-SPEED 4 WAY BED#460 4" SPINDLE HIGH-SPEED 4 WAY BED ELECTRIC CONTROL 4 PGS EACH YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.50 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL ME PLEASE DO NOT ASK TO BUY A PHOTOCOPY DURING OR AFTER AUCTION. COPIES ARE NOT AVAILABLE I DO SEND 2ND CHANCE OFFERS ON OCCASION IF I HAVE DUPLICATES. EMAIL ME TO VERIFY I SENT IT IF YOU'RE NOT SURE IT CAME FROM ME. IF YOU DON'T WANT TO RECEIVE 2ND CHANCE OFFERS YOU MIGHT WANT TO USE THE EBAY FEATURE THAT WILL ALLOW YOU TO'OPT-OUT' OF RECEIVING 2ND CHANCES FROM SELLERS. BUYER ... moreCAN COMBINE SHIPPING ON MULTIPLE PURCHASES. IF YOU BUY 1 COST IS $6.50. IF YOU BUY MULTIPLE ITEMS COST WILL STILL BE ONLY $6.50 TOTAL. SHIPPING COSTS ONLY INCREASE ON MULTIPLE PURCHASES IF YOUR ORDER CAN'T FIT IN A PRIORITY MAILER AND HAS TO BE PACKED OTHERWISE. SHIPPING& HANDLING CHARGES ARE NOT NEGOTIABLE. EVERYBODY PAYS THE SAME.
|
|
|
VALENITE CENTRE-DEX INDEXABLE BORING BAR W/ 3/4" SHANK - 0.73" DIA.
aims VALENITE CENTRE-DEX INDEXABLE BORING BAR W/ 3/4" SHANK- 0.73" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Valenite. This is a Centre-Dex Indexable Boring Bar good condition. Model# S-VMSP-073AR-90CCC Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Current Bore Diameter: 0.73" Approx. Shank: 3/4" Clamping System: Screw On. Insert Style: SD322D. Overall Length: 3.06" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products ... morelisted, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. VALENITE CENTRE-DEX INDEXABLE BORING BAR W/ 3/4" SHANK- 0.73" DIA. Reliable Tool Inc. c 2011 | Powered by
|
|
|
TRW HSS INDEXABLE BORING BAR W/ 1-3/4" SHANK
aims TRW HSS INDEXABLE BORING BAR W/ 1-3/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by TRW. This is a HSS Indexable Boring Bar in Good condition. Model# S-MCLNL-28-4 Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Current Bore Diameter: 2" Approx. Shank: 1-3/4" Clamping System: Screw On. Overall Length: 8-1/2" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting ... moreour page for more Great Deals! Bidding starts at a dollar with no reserve. TRW HSS INDEXABLE BORING BAR W/ 1-3/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
3" ADJUSTABLE BORING HEAD 3/4" TOOL BORE 1-1/4" SHANK CNC LATHE CNC MILLING
3" ADJUSTABLE BORING HEAD 3/4" TOOL BORE 1-1/4" SHANK CNC LATHE CNC MILLING, 3" ADJUSTABLE BORING HEAD 3/4" TOOL BORE. 1-1/4" REMOVABLE SHANK. MFG USA. VERY GOOD CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
10 CNC BORING BAR SLEEVES / BUSHINGS 3/8" TO 1-1/4" I.D.
aims 10 CNC BORING BAR SLEEVES/ BUSHINGS 3/8" TO 1-1/4" I.D. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by CNC& other mfrs. These are 10 Boring Bar Sleeves/ Toolholder Bushings in good condition. CNC Boring Bar Sleeves are universally used to adapt all boring bar or shank type tools to any CNC turning machines and machining centers for extensions or hard-to-reach areas. Specifications: Inner Diameters: 3/8" 5/8" 3/4" 1" 1-1/4" Outer Diameters Range: 1 to 2" Overall Lengths: 5" to 9" Comes as shown in pictures. Check out the photos and if you can't find what your looking for or have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other ... moreauctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 10 CNC BORING BAR SLEEVES/ BUSHINGS 3/8" TO 1-1/4" I.D. Reliable Tool Inc. c 2011 | Powered by
|
|
|
VALENITE INDEXABLE THREADING / BORING BAR W/ 1-1/4" SHANK & 3 INSERTS
aims VALENITE INDEXABLE THREADING/ BORING BAR W/ 1-1/4" SHANK& 3 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Valenite. This is an Indexable Threading/ Boring Bar with 3 Inserts in GREAT condition. Model# S20U-MCLNR-4 Specifications: Current Bore Diameter: 1.313" Shank: 1-1/4" Overall Length: 14" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. VALENITE INDEXABLE THREADING/ BORING BAR W/ 1-1/4" SHANK& 3 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
VALENITE #SDT-62 INDEXABLE BORING BAR w/ 3/4" SHANK + INSERTS
aims VALENITE#SDT-62 INDEXABLE BORING BAR w/ 3/4" SHANK + INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Valenite. This is a NEW! Indexable Boring Bar w/ Inserts. Model# SDT-62 Specifications: Current Bore Diameter: 3/4" Shank: 3/4" Overall Length: 5 1/2" Replacement Inserts: 2. Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. VALENITE#SDT-62 INDEXABLE BORING BAR w/ 3/4" SHANK + INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
RTW 3/4" INDEXABLE BORING BAR + INSERTS
aims RTW 3/4" INDEXABLE BORING BAR + INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an Indexable Boring Bar with Inserts in good condition. Model# A12S-SCLCR NC6 Specifications: Cutting Diameter: 1" Shank Size: 3/4" Overall Length: 7-1/2" Comes as show in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. RTW 3/4" INDEXABLE BORING BAR + INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Union Steel Boring Bit 3/4"
SquareTrade © AP6.0 Union Steel Boring Bit 3/4" You are bidding on what I think is a boring bit made by Union Steel COmpany. 4 1/2" boring depth. Overall length 8 1/2" A bit on the rusty side. About Us: We offer a large variety of items and do not specialize in any one area. The majority of our items are acquired through estates. Home sales, storage bins, closeouts etc. etc. We describe them to the best of our ability and use multiple photos to help aid you in your bidding decisions. All items are as pictured and described. If you do not see a particular part or that part is not described in the auction then it most likely IS NOT INCLUDED. When able, items that require testing are tested, however there are some items that we(for whatever reason) are unable to test. Those items are sold AS-IS untested which means there ... moreis no guarantee that they will work as originally intended. In most cases these items are fine, but in some cases they are not. If you have any questions whatsover in regards to an auction don't hesitate to contact PRIOR TO BIDDING. By placing a bid you are agreeing to all the parameters set forth within the auction. Your bid is a binding contract and will be treated as such. Ebay has no field in the shipping calculator for Fed Ex Ground services. So please keep in mind when choosing UPS Ground your package will ship via Fed Ex Ground. Regarding Classes of Mail and Delivery Times: While Media Mail and Parcel Post are cost effective they are also the slowest methods of transport. Within the continental U.S. lower 48) these can take up to two to three weeks to arrive. When choosing these methods for Alaska. Hawaii, Puerto Rico expect delivery time of a month or more. This also applies to APO/FPO addresses. Please keep this in mind when choosing class of mail during checkout. DO NOT EXPECT TO RECEIVE MEDIA MAIL SHIPMENTS ANY SOONER THAN TWO WEEKS. Sometimes it may arrive quicker, most times this is not the case. In some instances when Parcel Post is chosen we may upgrade the shi
|
|
|
GENUINE PHASE II AXA QUICK CHANGE 3/4" 5/8" BORING BAR TOOL HOLDER LATHE 250-104
Very Nice- Genuine Phase II quick change boring tool holder. Stamped 250-104. Holds 3/4" and 5/8" diameter boring bars. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3" ADJUSTABLE BORING HEAD 3/4" TOOL BORE R8 SHANK APT USA MADE OFFSET BORING
APT P RECISION OFFSET BORING HEAD USA MADE HEAD IS 3" DIAMETER WITH R8 BRID GEPORT SHANK. FITS A NY MILL WITH R8 SPINDLE TOOL BORES 3/4" ADJUSTING DIAL IS.001" INCREMENTS R8 KEYWAY IN NI CE SHAPE VERY N ICE CONDITION $12.50 S&H
|
|
|
EDW ANDREWS LatheCNC BORING BAR SLEEVE TOOL HOLDER (OD 3/4")(ID .187") EA-48-60
EDW ANDREWS CNC BORING BAR SLEEVE TOOL HOLDER(OD 3/4"ID.187" EA-48-60. Made in Troy Michigan. As seen in pictures. Will ship USPS Priority at $5.35. NO RESERVE
|
|
|
ERICKSON BORING HEAD 3/4" TOOL BORE NMTB 40 SHANK 4" DIAMETER SQUARE CROSS HOLE
Erickson Boring Head 4" Diameter NMTB 40 Shank 3/4" Boring Bar Hole 1" on Center 3/4" Square Cross Hole.001" Graduations Threads on boring head& shank appear to be 2"8 TPI Erickson B-66513 725-300826 Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
Borite 8SC 3/4 Shank Positive Rake 90 Degree Screw Down Indexable Boring Bar
This is in used but good condition. I try to give as accurate of a description as I can and point out any flaws that I notice in an item. If I overlook something. Please bring it to my attention so I can address the issue. I want you to be happy with your purchase! I offer a generous shipping discount for multiple items.
|
|
|
DOUBLE ENDED BORING BAR FOR 1/4" BITS WITH 3/4" SQUARE CLAMP
THIS IS A NICE DOUBLE SIDED BORING BAR THAT USES 1/4" TOOL BITS. THE CLAMP IN THE CENTER IS 3/4" SQUARE AND IT SLIDES BACK AND FORTH TO MAKE THE BAR LONGER OR SHORTER. THE CLAMP IS SPLIT AND WHEN YOU TIGHTEN IT UP IN YOUR TOOL POST IT LOCKS THE BAR IN PLACE. IT MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
|
|
|
#40 Taper tool holder with 3" boring head for 3/4 boring bars
40 Taper too holder with 3" boring head for 3/4 boring bars. Listed best as possible fast shipping.
|
|
|
APT USA BH34-3 GIC 3/4" SHANK BORING HEAD
This auction is for an APT USA BH34-3 boring head in good used working condition. It's 2" diameter has a 3/4" shank and uses 1/2" bits. Email me with any questions before bidding or for an international shipping quote. I charge only actual shipping costs and I usually ship the same or next business day of receiving payment. I also will combine items when possible to save you on shipping costs. If this is the case email me and wait until I send you the combined invoice. Your item will be carefully packaged. Insured, tracked and shipped with USPS. Check out my other listings for more items I'll be listing soon. Check out my!
|
|
|
1" VALENITE VARI-SET BB-1 ADJUSTABLE BORING BAR x 9-3/4" LENGTH
1" VALENITE VARI-SET ADJUSTABLE BORING BAR PART NO. BB-1. 9-3/4" OVERALL LENGTH HEAD INCLUDED Used condition. Actual item pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $7.50 for USPS Priority Mail shipping with tracking. STOCK NO. BB1289 Thanks for looking!
|
|
|
Phase 2 Quick Change 3/4" Boring Bar Tool Holder 10-15" Swing Lathe #250-204
This auction is for a Phase 2 boring bar tool holder BXA#250-204 in excellent used condition with FREE US SHIPPING for 10-15" swing lathes. See my other auctions for more of this set. Email me with any questions before bidding or for an international shipping quote. I charge only actual shipping costs and I usually ship the same or next business day of receiving payment. I also will combine items when possible to save you on shipping costs. If this is the case email me and wait until I send you the combined invoice. Your item will be carefully packaged. Insured, tracked and shipped with USPS. Check out my other listings for more items I'll be listing soon. Check out my! G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13ef1399fdb-0xf1-
|
|
|
lot of 3 mori seiki ? Boring Bar Tool Holder lathe cnc turning 1-1/4"
lot of 3 boring bar holders as pictured you will receive all 3 for 1 price all parts shown are included if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent within 2 business days thank you for viewing o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13ef31b6b51-0xfb-
|
|
|
CO SWISS PRECISION BORING HEAD W/ CAT 50 ADAPTER 2-3/4 - 4 - 5
CO PRECISION BORING HEAD SWISS MADE PART NO. 18367 INDEXABLE CARTRIDGE INCLUDE. CAT 50 ADAPTER. Very good condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $15.00 for USPS Priority Mail shipping with tracking. STOCK#L12 Thanks for looking!
|
|
|
Armstrong #9 Boring Bar Holder & Williams 3/4 x 14" Boring Bar
1/2" x 1-1/8 Shank on the holder. The boring bar is 3/4" diameter x 14" long and takes 3/8" bits. The boring bar has some vise grip marks on it but works fine. P lease visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
BRIDGEPORT MICRO BORING HEAD W/ 3/4" SHANK & FITTED CASE - 3-1/2"
aims BRIDGEPORT MICRO BORING HEAD W/ 3/4" SHANK& FITTED CASE- 3-1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Bridgeport. This is a Micro Boring Head in good condition. Model# 2 Specifications: Boring Head Diameter: 3-1/2" Capacities: 5/8" Cross Hole Inside Diameter: 5/8" Center to Center Distance: 1-1/4" Shank: 3/4" round) Overall Length: 5-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BRIDGEPORT MICRO BORING HEAD W/ 3/4" SHANK& FITTED ... moreCASE- 3-1/2" BRIDGEPORT MICRO BORING HEAD W/ 3/4" SHANK& FITTED CASE- 3-1/2" Reliable Tool Inc. c 2011 | Powered by
|
|
|
ENGINE LATHE or MILL 3/4" x 10" BORING BAR tool holder hss bit EVEREDE USA
good used lathe or mill boring bar Everede USA. Approx 3/4" shank x 10" long. HSS bit included. Please check my other auctions and happy bidding! Will ship for $5.80 anywhere in the USA.
|
|
|
R-8 SHANK - 3" BORING HEAD vertical milling machine tool holder r8 3/4" bars
very good used R-8 shank- 3" boring head marked L.B. Tool Co holds 3/4" boring bar will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Metal Lathe Aloris BXA-43 Dual Boring Bar Holder 1"/ 3/4" Diameter
A used Aloris BXA-43 boring bar tool holder with the unique design of dual loading and the spring capture system for the bars. Accepts 1" and 3/4" diameter bars. Has no chips. Cracks, repairs or owners marks. The spring locking system works fine. Very good condition overall. Thanks for looking.
|
|
|
UNIVERSAL ENGINEERING Kwik-Switch 300 Boring Head Arbor 3/4 x 16 tpi #803262
UNIVERSAL ENGINEERING Kwik-Switch 300 Boring Head Arbor 3/4 x 16 tpi#803262
|
|
|
Lyndex 3/4" BORING & FACING HEAD WITH BT 40 SHANK
This is a 3/4" Boring head made by Lyndex in Japan. It's been used but appears to have a lot of life left in it. We bought it in a lot of tools at a local auction. It's made for use with a BT40 machine.
|
|
|
NICE!! CRITERION 1/2" BORING HEAD #DBL-202 w/ 3/4" SHANK
aims NICE! CRITERION 1/2" BORING HEAD#DBL-202 w/ 3/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Criterion. This is a Criterion Boring Head in good condition. Model# DBL-202 Here is a small head that will be in constant demand in any shop. Note the wide base bearing surface that assures maximum rigidity even when the bar holder is in an offset position. This wide base design is a Criterion innovation that increases bearing surfaces by 50% over older models. Specifications: Head Diameter: 2" Overall Head Length: 2-13/32" Boring Bar Hole Size: 1/2" Center Distance Between Holes: 5/8" Cross Hole Diameter: 1/2" Offset: 5/8" Shank: 1/2" Straight. Dial Movement: 001" per diameter divisions. Comes as shown in pictures. ... moreTo go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! CRITERION 1/2" BORING HEAD#DBL-202 w/ 3/4" SHANK NICE! CRITERION 1/2" BORING HEAD#DBL-202 w/ 3/4" SHANK NICE! CRITERION 1/2" BORING HEAD#DBL-202 w/ 3/4" SHANK Reliable Tool Inc. c 2011 | Powered by?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f0b2d6a12-0xff-
|
|
|
BORING BAR SLEEVES, 1.500 OUTSIDE DIA. 5 PIECES FROM 3/8" TO 1 1/4"
This is for a set of 5 boring bar sleeves. All have 1.500 outside dia. They are as follows: one piece each of 3/8" 1/2" 7/8" and two of 1 1/4" Free priority mail shipping anywhere in the 48 continental US states. Thanks for looking and check out my other Ebay auctions!
|
|
|
NICE! GENUINE ERICKSON NO. 37 TENTHSET BORING HEAD W/ 3/4" SHANK
Made by Erickson Tool Co. This is a precision adjustable boring head in good condition. Model No: 37 Specifications: 1 Division = 0.0001" in Diameter Size of Shank: 3/4" Length of Shank: 2-1/2" Diameter: 1-3/4" Overall Length: ~5.33" Uses 3/8" boring bars. Comes as shown in pictures. 2
|
|
|
5 MORSE TAPER 1 3/4" DRILL lathe bit boring mill mt tool HSS
good used 5 morse taper shank drill mfg not marked 1 3/4" x 19" long has set screw flat ground on taper please check my other auctions and happy bidding! we can combine several drills into a large flatrate box for $16.85 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
5 MORSE TAPER 1 3/4" DRILL lathe bit boring mill mt tool GTD AMPCO USA
good used 5 morse taper shank drill Gtd Ampco USA 1 3/4" x 14 1/2" long please check my other auctions and happy bidding! we can combine several drills into a large flatrate box for $16.85 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
5 MORSE TAPER 1 3/4" DRILL lathe bit boring mill mt tool CLE FORGE USA
good used 5 morse taper shank drill Cle-Forge USA 1 3/4" x 17" long needs sharpened please check my other auctions and happy bidding! we can combine several drills into a large flatrate box for $16.85 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3/4" BORING BAR SCLCR 12-3 USES CARBIDE INSERTS USED
CRITERION BORING HEAD W/ R8 SHANK DBL-203 USED On Jan-28-10 at 16:25:02 PST. Seller added the following information: BUYING MULTIPLE ITEMS? BE SURE TO REQUEST A COMBINED SHIPPING INVOICE FROM US BEFORE YOU PAY. How to Request an Invoice so shipping is correct and up to date. 1. Click Commit to Buy 2. DO NOT CLICK PAY NOW 3. Go to Ebay Summary. Under PURCHASES 4. Select More Actions 5. Select Request Total
|
|
|
BH-34 APT Boring Head Tool Holder 3/4" Shank. Unknown Condition Selling as Parts
Call Brett At 309-261-5695 for questions. e4 BH-34 APT Boring Head Tool Holder 3/4" Shank. Unknown Condition Selling as Parts View all photos carefully. Check out my! Payment due within 7 days of auctions end.
|
|
|
Kennametal 3/4"X 10" Dia. Boring Bar, A12-SCLPL3-AP5, Used, Warranty
Title: Kennametal 3/4"X 10" Dia. Boring Bar. A12-SCLPL3-AP5, Used Description: Our Internal Stock# V29-3(06-03-13 RN) You are about to purchase the following item: 1- Kennametal 3/4"X 10" Dia. Boring Bar. A12-SCLPL3-AP5, Used Cat# A12-SCLPL3-AP 3/4" Dia x 10" Long Carbide insert The unit looks to be in very Good Condition. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 day return Privilege if found defective(freight prepaid by buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping ... moreis based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and payed for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We k
|
|
|
KIA Kit30A CNC Turning Center 3/4" Boring Bar Tool Holder / Block, Used
Title: KIA Kit30A CNC Turning Center 3/4" Boring Bar Tool Holder/ Block. Used Description: Our Internal Stock# J57-78(06-03-13 RN) You are about to purchase the following item: 1- KIA Kit30A CNC Turning Center 3/4" Boring Bar Tool Holder/ Block. Used 3/4" BORING BAR HOLDER This is used on the Machine for mounting Boring Bar on Machine Slide. Overall Size: 4-1/2" x 2-1/2" x 4-1/2" H. 3/4" ID Hole for Boring Bar. Keyed on Bottom. W eight: 12 Lbs. This TOOL BLOCK is off the Following Machine: KIA KIT30A CNC Turning Center. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item ... moreyou will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices
|
|
|
3/4" DIA X 4" LONG CARBIDE TIPPED BORING BAR - LATHE TURNING CNC (LOT OF 18)
3/4" DIAMETER CARBIDE TIPPED BORING BARS ABOUT 4" LONG. APPEARS THEY ARE NEW OR REGROUND. THIS AUCTION IS FOR 18 BORING BARS. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f1777e35c-0x106-
|
|
|
Two 3/4" Shank Boring Bars. One Marked Valenite 5T0 FDTW-7520, Flex-A-Dex USED
Two 3/4" Shank Boring Bars. One Marked Valenite 5T0 FDTW-7520. Flex-A-Dex I don't see a manufactures name on the other bar. It is NOT a Flex-A-Dex The total length of each bar is about 6" Both are in well used working condition. And have wear at the tip You get them just as you see in the pictures Posted with
|
|
|
kennametal carbide shank boring bar.3/8" shank,coolant thru.with 4 inserts.
end was broken off@ 3 1/2"will combine shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13f1e0995ca-0xf6-
|
|
|
kennametal carbide shank boring bar.3/4" shank,coolant thru.with 10 inserts.
uses cheap tpg#3 inserts. good condition.will combine shipping.
|
|
|
SOLID CARBIDE 3/4 INCH BORING BAR , C12L - STFPL , USE WITH TPG INSERTS ,
UP FOR AUCTION IS A SOLID CARBIDE 3/4 INCH BORING BAR. THIS IS A C12L- STFPL BAR THIS USES TPG INSERTS, THIS IS 5 1/2 INCHES LONG. THIS HAS BEEN PREVIOUSLY USED AND IS IN GOOD CONDITION.
|
|
|
3.500" - 4.562" VARI-SET ADJUSTABLE BORING BAR W/ MICRO ADJUST HEAD Modco CAT 40
This listing is for a 3.500" 4.562" VARI-SET ADJUSTABLE BORING BAR W/ MICRO ADJUST HEAD Cat40 shank Range: 3.500" 4.562" approx 15" overall length approx 3" round carbide tip and allen wrench included as shown please see all photos if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent within 2 business days thank you for viewing g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13f254e5370-0xf4-
|
|
|
HARDINGE TB 3/4 STA001121201 BORING BAR HOLDER - LATHE TOOL
USED HARDINGE TB 3/4 SLIDE TOOL MODEL: TB 3/4 SPECIFICATIONS: SHANK: 3/4" HARDINGE DESCRIPTION THE SLIDE TOOL IS USED TO PERFORM TURNING OR BORING OPERATIONS. IT MOUNTS INTO THE TURRET OR A ROUND SHANK TOOL HOLDER. THE TOOL HOLDER IS ADJUSTABLE FOR CHANGING A BORE OR TURN DIAMETER USING THE TEE HANDLE WHICH CONTROLS A FINE PITCH THREAD. IT HAS A DIAL THAT IS GRADUATED IN.001" 03 MM) INCREMENTS MAKING A DIAMETER ADJUSTMENT OF.002" 05 MM) PER GRADUATION. THE SLIDE HAS AN OVERALL TRAVEL OF 7/8" 22.23 MM) AND HOLDS 5/8" DIAMETER SHANK TOOLS. Please note the shank can be removed and replaced with a 5/8" shank(Available from Hardinge) making this a TBA 5/8. Please feel free to ask questions before bidding. Retail on this is $1520.00 so get it here at a great price. Also note. The TB 3/4 is rare and hard to find.
|
|
|
solid carbide boring bar 1/2 x 4 x 3/8 logan cnc machine shop long reach used
13E233102 Up for sale is a custom made solid carbide metal cutting boring bar. Great for use on a lathe or in a boring head for a mill, this has a shank that is 0.498 x 1 1/2 with a flat for holding it, this is lightly use there is a chip in the carbide but its on the non cutting area see photo, will not effect the performance, this has a cut down are that is around 2.43 long with a 0.36 shank, the end is cut and relieved to cut a bore, this tool is a nice solid carbide tool for many uses, buyer to pay calculated shipping and packing to your locations, see our store for more items like this, thank you RWK.
|
|
|
Criterion Boring Head for 1" Boring Bars, 3/4" (0.75") Shank
Up for auction is this used Criterion boring head in excellent condition. The larger 1" boring bar holder makes for a more rigid cutter with less chatter. While the 3/4" shank fits easily in a collet for quick setup. Dimensions are as follows: Boring bar holder diameter: 1" Shank diameter: 3/4" Head size: ~3" x 3" Overall length: ~6" Name brand boring heads like this typically retail for several hundred dollars. This NO RESERVE auction starts at less than a quarter of the retail price! Bid now and save big! Normal 0 Additional information: Payment is due within 3 business days of close of auction; Paypal only. Please. Item will ship within 3 business days of receipt of payment. There is no return policy; all items are sold as-is, as shown in the pictures.
|
|
|
Criterion Boring head S 1 1/2" Square holds 1/2" boring bars, 3/4" shank .001
Criterion boring head in excellent condition. Model S 1 1/2. Has 3/4" diameter removable shank. Holds 1/2" boring bars. 1 division =.001 diameter
|
|
|
Boring head for CNC mill or Bridgeport mill .001 adjustment 3/4 shaft 1/2 holes
Nice boring head with 3/4 straight shaft. Adjustable in.001" increments. For 1/2" diameter tools. Almost identical copy of Criterion DBL-202.
|
|
|
NICE! BORING BAR w/ 2-3/4" SHANK
aims NICE! BORING BAR w/ 2-3/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Boring Bar in good condition. Specifications: Current Bore Diameter: 4" Shank: 2-3/4" Overall Length: 5" to 6" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! BORING BAR w/ 2-3/4" SHANK NICE! BORING BAR w/ 2-3/4" SHANK NICE! BORING BAR w/ 2-3/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
CARBOLOY 1.350" INDEXABLE BORING BAR w/ 1 3/4" SHANK + INSERTS
aims CARBOLOY 1.350" INDEXABLE BORING BAR w/ 1 3/4" SHANK + INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A. by CARBOLOY. This is an Indexable Boring Bar with Inserts in good condition. Model# MCLNR28-4H Specifications: Bore Diameter: 1.350" Shank: 1 3/4" Overall Length: 14" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CARBOLOY 1.350" INDEXABLE BORING BAR w/ 1 3/4" SHANK + INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
3-1/2" - 4-13/16" DEVLIEG MICROBORE BORING BAR W/ INDEXABLE INSERT CARTRIDGE
DEVLIEG MICROBORE BORING BAR 3.500" 4.812" RANGE. 1.500" STRAIGHT SHANK. INDEXABLE INSERT CARTRIDGE Very good used condition. As pictured. Payment due within seven day of purchase. Check. M/o, and PayPal accepted. $11.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
UNIVERSAL OY BORING HEAD W/ 3/8" COLLET & 3/4" STRAIGHT SHANK
TSD/ UNIVERSAL ENGINEERING ADJUSTABLE BORING HEAD MODEL OY-52 3/8" COLLET INCLUDED 3/4" STRAIGHT SHANK Good used condition. Actual item pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
SOLAR QUICK-CHANGE BORING BAR TOOL HOLDER - 1-3/4"
aims SOLAR QUICK-CHANGE BORING BAR TOOL HOLDER- 1-3/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Solar. This is a Boring Bar Tool Holder in good condition. Features: Rugged- No chatter or vibration. No time wasted with shims. Unlimited versatility. Safe and simple to operate. Speed your lathe operations up to 90% For fine precision work to heavy-duty cutting. Specifications: Capacity: 1-3/4" Bottom Dovetail Size: 1.725" Overall Dimensions: 2-3/4" wide x 4" long x 3" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding ... morestarts at a dollar with no reserve. SOLAR QUICK-CHANGE BORING BAR TOOL HOLDER- 1-3/4" SOLAR QUICK-CHANGE BORING BAR TOOL HOLDER- 1-3/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
3/4" Dia Kennametal Carbide Boring Bar 10" Long Nice!
3/4" Dia Kennametal Carbide Boring Bar 10" Long Part# BB-7064. Slightly used but still in Very Good Condition! Item is surplus to me and proiced to move! Ships USPS Priority Mail same day!
|
|
|
Armstrong Lathe Boring Bar Tool Post Holder #0-BB 2B736 3/8" 1/2" 3/4" Atlas
great condition with bars
|
|
|
LOT OF PRECISION HSS BORING BARS 3/8" TO 3/4" SHANKS
aims LOT OF PRECISION HSS BORING BARS 3/8" TO 3/4" SHANKS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Lot of Precision Boring Bars in good condition. Specifications: Shanks: 3/8" to 3/4" Overall Length: 2-1/2" to 5" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF PRECISION HSS BORING BARS 3/8" TO 3/4" SHANKS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Flynn 4" Boring Bar Head Model 65 WITH #3 Morse Taper
Flynn 4" Boring Bar Head Model 65 WITH#3 Morse Taper MADE IN DETROIT MICHIGAN
|
|
|
3/4" boring bar (4.5" long) with 31 carbide inserts
Boring bar is in like-new condition; 31 carbide inserts are new
|
|
|
SANDVIK COROMANT 1 1/4" SHANK BORING BAR S2OU STFCR 3 MACHINIST TOOLS
HELLO- YOU ARE PURCHASING THE PICTURED BORING BAR. IT IS USED. IT HAS A 1 1/4" SHANK. THE TOOL IS LABELED: SANDVIK COROMANT S2OU-STFCR 3 IF YOU NEED SANDVIK TOOLING PLEASE CONTACT ME. I HAVE ABOUT $200.000 OF SANDVIK INVENTORY. FACE GROOVING TOOLS, BORING BARS, INSERTS, CAT 40 CAT 50 BT40 BT 50 CAPTO C3 C4 C5 C6 C8 HSK 63 HSK 100 VARILOCK AND MUCH MUCH MUCH MORE IN SANDVIK! MOST OF IT IS NEW! PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES! I SHIP(95% OR MORE) OF MY LISTINGS SAME DAY AS PAID IF PAID BY 3:00 P.M. EST. IF YOU MUST HAVE YOUR ITEMS SHIPPED SAME DAY PLEASE EMAIL OR CONTACT ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. FREE SHIPPING IF YOU BUY 5 OR MORE OF MY LISTINGS. OR ANY QUANTITY THAT ADDS UP TO OR EXCEEDS $200.00 IN VALUE. OFFER GOOD FOR U.S. STATES SHIPPING ONLY. SOME LARGE ITEMS DO NOT QUALIFY. I WILL COMBINE ... moreSHIPPING. I WILL SHIP WORLDWIDE. THANK YOU! LL
|
|
|
VALENITE INDEXABLE BORING BAR 14" SHANK 1-1/4" DIAMETER + 3 INSERTS
Valenite Indexable Boring Bar Includes 3 Unused Inserts Model S395 Model: VBS220 Overall Diameter: 1-1/4" 14" Shank Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
2-3/4" - 3-15/16" KAISER 312.615 FINISH BORING HEAD W/ CAT 50 1 DIV = .0005" DIA
KIASER FINISH BORING HEAD MODEL 312.615 2-3/4" 3-15/16" BORING RANGE 1 DIV. =.0005" DIA. KA6 CONNECTION KPT KAISER CAT 50 ADAPTER ADAPTER PART NO. 11.326.662 Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, or PayPal accepted. $11.50 for USPS Priority Mail shipping with tracking. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f615514c9-0xfe-
|
|
|
ERICKSON 1/2" TENTHSET BORING HEAD # 50 WITH 3/4" SHANK
Search Titles and Descriptions Categories Policies Gallery ERICKSON 1/2" TENTHSET BORING HEAD# 50 WITH 3/4" SHANK ERICKSON 1/2" TENTHSET BORING HEAD# 50 WITH 3/4" SHANK ERICKSON 1/2" TENTHSET BORING HEAD# 50 WITH 3/4" SHANK ERICKSON 1/2" TENTHSET BORING HEAD# 50 WITH 3/4" SHANK Features Provides accuracy. Reliability and speed in a wide variety of boring applications, Ideal for use on machining center. Jig bores, milling machines, boring mills, turret lathes and automatic and custom built machines, Vernier calibration permits fine adjustments of.0001" on diameter, Strong locking mechanism maintains hole size, Adjusting screw is backlash free to provide increased accuracy. Reliability and repetitiveness, Fewer parts mean less maintenance and improved reliability, Symmetrical. Compact design reduces ... moreoverhang to provide additional strength, The same head can be used on a variety of machines to reduce inventory and save cost, Specifications 2 1/2" Head Diameter 2 1/2" Overall Head Length 1/2" Boring Bar Hole Size 3/4" Straight Shank. 1 DIV =.0001" on Diameter. This item comes as shown. Copyright c 2012 Bid On Industrial. Powered by
|
|
|
G&L DAVIS BORING BAR HOLDERS SYSTEM 21 BLADES 16 spare inserts 2-3/4” - 7-3/4”
a few spare parts MOST TOOLS ALREADY HAVE THE CARBIDE INSERT INSTALLED PLEASE SEE ALL PHOTOS very nice tooling in very good condition as shown if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent within 2 business days thank you for viewing
|
|
|
EDW. ANDREWS 1 3/8" BY 93/4" BORING BAR (H-18)
FOR USE WITH SQUARE STOCK 1/2- 1/2" EA44- 27 I ship 6 days a week. I offer money back quarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interersted INTERNATIONAL SHIPPING VARIES Powered by The free listing tool. List your items fast and easy and manage your active items. On Feb-04-13 at 08:32:15 PST. Seller added the following information: IF YOU PURCHASE THREE ITEM AT FULL PRICE I WILL PROVIDE FREE PRIORITY SHIPPING! JUST ASK FOR COMBINE INVOICING.
|
|
|
Universal Kwik Switch Taper 300 KS300 Micro Bore Boring Bar Holder 3/4 - 1" Head
Universal Kwik Switch Taper 300 KS300 Micro Bore Boring Bar Holder Head 3/4" 1" Kwik Switch Taper part# 95341 Microbore Head part# 95299 Pictures are of the actual item Used but in good condition
|
|
|
HEAVY DUTY 1-3/4" DIAMETER INDEXABLE BORING BAR + INSERTS
Heavy Duty Indexable Boring Bar + Inserts Includes 3 Teledyne MP-15 DNMG-432A-4T Inserts Model B1214 Insert TP 43 1-3/4" x 14" Shank Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
ENGINE LATHE or MILL 3/4" x 7" BORING BAR tool holder 3/8" hss cutting bit
good used lathe or mill boring bar mfg not marked holds 3/8" HSS bit at 45 degrees approx 3/4" shank x 7" long 3/8" hss bit included please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
TOOL HOLDER BUSHING BORING BAR SLEEVE 1- 1/2" OD 1-1/4" ID SN 13C 3.635" long
BORING BAR SLEEVE 1- 1/2" OD 1-1/4" ID SN 13C 3.635" long sizes shown in photos if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent within 2 business days thank you for viewing
|
|
|
CARBOLOY SMR-SS24-48CZ-H BORING BARS, 13-7/8" X 1-3/4"
Inventory Number: 05131400043 Manufacturer: Description: CARBOLOY SMR-SS24-48CZ-H BORING BARS. 13-7/8" X 1-3/4" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, GAGE LENGTH 13-7/8" BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The
|
|
|
MINT WILLIAMS USA 3/4" REVERSABLE BORING BAR HOLDER 4 Atlas, Southbend Lathe
This Sale is for ONE MINT WILLIAMS USA REVERSABLE BORING BAR HOLDER Shank is 3/4" High and 3/8" Wide. This tool would suit Atlas. Southbend and similar Lathes. Please see photographs for more detail. A scale shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my other sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. have No way to know when and if these charges will be applied. ... moreI will not falsify shipping documents. So please don't ask. We accept PAYPAL for sales within north America. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component.If any lega
|
|
|
4 pcs Carbide Boring Bars 3/8" Shank
4 pcs Carbide Boring Bars 3/8" Shank Approximate Minimum Bore.205" x 1.5" f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f813d6f70-0x102-
|
|
|
USED VALENITE SDT-62 Carbide Inserts BORING BAR (3/4"-Shank) TPEE-731
LISTING IS FOR A USED VALENITE BORING BAR BRAND- VALENITE STYLE- SDT-62 SHANK- 3/4" OAL- 5.625" 615 DIA(ETCHED ON BACK OF BAR) USES INSERTS- TPEE 731(NOT INCLUDED) CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS ... moreWELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER L
|
|
|
1-3/4" CARBIDE INSERT Boring Bar SNAP TAP CNR 00200 14-16
Used but excellent condition Seco CNR 00200 Boring Bar Snap-Tap 14-16 Made in USA Shipping is 12.00 Item is 9lbs yellow#4
|
|
|
ISCAR HAI 19 INDEXABLE BORING BAR W/ 3/4" SHANK
aims ISCAR HAI 19 INDEXABLE BORING BAR W/ 3/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Iscar This is an Indexable Boring Bar in good condition. For internal grooving and turning adapters. Specifications: Shank: 3/4" dia. Boring Diameter: 750" Overall Length: 5" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ISCAR HAI 19 INDEXABLE BORING BAR W/ 3/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
1 SANDVIK 3/4" CARBIDE BORING BAR. C12S-SCLCR-3C. OAL 10" COOLANT FED {A936}
1 SANDVIK 3/4" CARBIDE BORING BAR. C12S-SCLCR-3C. OAL 10" COOLANT FED SOME MINOR DINGS AND SCRATCHES ON THE HEAD FROM BEING MOVED AROUND THE STORE AND FROM SOME MINOR USE. BAR IN IN GOOD CONDITION FOR BEING USED. PROBABLY ONLY USED A FEW TIMES. BACKSIDE OF THE HEAD WAS MILLED DOWN SOME. DOESN'T AFFECT THE BAR WHEN IT IS BEING USED. CHIP IN THE BOTTOM OF THE BAR. DOESNT AFFECT THE BAR WHEN IT IS BEING USED. IF YOUR NOT HAPPY WITH THE BAR. PLEASE RETURN IT FOR A FULL REFUND BEFORE YOU USE IT. PLEASE CHECK OUT OUR GREAT FEEDBACK ON OUR CARBIDE BARS AND CARBIDE INSERTS. MADE IN USA FITS: KENNAMETAL. SANDVIK, SECO, ISCAR, VALENITE, SUMITOMO, TUNGALOY PLEASE NOTE THAT 1 DAY SHIPPING IS DIFFERENT THAN 1 DAY DELIVERY.
|
|
|
1 KENNAMETAL 3/4" CARBIDE BORING BAR. C12-STUNR3. OAL 8" USA MADE {A932}
1 KENNAMETAL 3/4" CARBIDE BORING BAR. C12-STUNR3. OAL 8" THIS BAR WAS CUT ON THE BOTTOM TO MAKE IT SHORTER. THERE ARE SOME SCREW MARKS BUT IT DOES NOT LOOK TO BE VERY USED. THE HEAD IS IN GREAT SHAPE. SOME MINOR DINGS AND SCRATCHES FROM BEING MOVED AROUND THE STORE. IF YOUR NOT HAPPY WITH THE BAR. PLEASE RETURN IT FOR A FULL REFUND BEFORE YOU USE IT. PLEASE CHECK OUT OUR GREAT FEEDBACK ON OUR BARS AND INSERTS. MADE IN USA FITS: KENNAMETAL. SANDVIK, SECO, ISCAR, VALENITE, SUMITOMO, TUNGALOY PLEASE NOTE THAT 1 DAY SHIPPING IS DIFFERENT THAN 1 DAY DELIVERY.
|
|
|
LOT OF 4 BORING BARS/ SLEEVES 3.5-7.5"long 1/2 & 3/4"SHANK W/KEO&WELDON CUTTERS
BORING BARS/BORING SLEEVES between 3.5-7.5" long. 2 1/2" shank& 2 3/4" shank boring bars, With KEO# 10682 HHS Drill/Countersink& WELDON 7/16" Flat End Mill CUTTER. Sold as a lot. NO RESERVE. Ships out USPS Priority and is delivered within 3 day of shipment.
|
|
|
J.A. FAY & EGAN 1909 No. 1, 2, 3 & 4 Bench Borer Boring Machines Original
This is a Rare 1909 original J.A. FAY& EGAN 1909 No. 1. 2, 3& 4 Bench Borer Boring Machines advertising information page from a 1909 J.A. FAY& EGAN catalog. The page measures 12 1/8" x" x 9" Please view my other listings for other rare original 1909 J.A. FAY& EGAN catalog advertising. These would look great framed and hung on the wall although no frame is included.
|
|
|
KENNAMETAL INDEXABLE BORING BAR w/ 1-1/4" SHANK & 3 INSERTS
aims KENNAMETAL INDEXABLE BORING BAR w/ 1-1/4" SHANK& 3 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Kennametal. This is an Indexable Boring Bar& 3 Inserts in good condition. Model# A20U-MCLNR4 NG3 Specifications: Current Bore Diameter: 1-3/8" Shank: 1-1/4" Overall Length: 9" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL INDEXABLE BORING BAR w/ 1-1/4" SHANK& 3 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
CIRCLE MACHINE INDEXABLE BORING BAR W/ 3/4" SHANK & INSERTS
aims CIRCLE MACHINE INDEXABLE BORING BAR W/ 3/4" SHANK& INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A by Circle Machine. This is a Indexable Boring Bar with Inserts in good condition. Model# QBB-500-12N Features: Use for boring. Facing and bottoming. High positive rake provides freer cutting and less tool deflection. 60 Deg Lead angles. Inserts fit all Circle and Everede bars. Precision ground on all surfaces. Specifications: Bore Diameter: 1/2" Shank: 5/8" Material: HSS. Overall Length: 4-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page ... morefor more Great Deals! Bidding starts at a dollar with no reserve. CIRCLE MACHINE INDEXABLE BORING BAR W/ 3/4" SHANK& INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
SANDVIK INDEXABLE BORING BAR w/ 3/4" SHANK + 2 INSERTS
aims SANDVIK INDEXABLE BORING BAR w/ 3/4" SHANK + 2 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Sandvik. This is an Indexable Boring Bar with 2 Inserts in good condition. Model# RTBAP-12-2 Specifications: Shank: 3/4" Overall Length: 8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SANDVIK INDEXABLE BORING BAR w/ 3/4" SHANK + 2 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
BORING BAR SLEEVE EC-15461 3/4 ID. TRUDEX 11T03 Stock #0782
BORING BAR SLEEVE EC-15461 3/4 ID. TRUDEX 11T03 Stock#0782*Used in excellent condition 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13f9cb57e1e-0xfb-
|
|
|
BORING BAR SLEEVE EC-15443 3/4" I.D TRUDEX 4T06 Stock #0783
BORING BAR SLEEVE EC-15443 3/4" I.D TRUDEX 4T06 Stock#0783 Like new condition. I'm not sure if its ever been used.
|
|
|
EVEREDE 6" Boring bar.. Bore 3/4" and over. also an internal rhreading bar.
EVEREDE 6" X 3/8" boring bar w/change insert. and straight internal threading bit. Ready to do.
|
|
|
Kennametal B1110 Boring Bar 1.25" X 8-3/4" with carbide inserts
Good Used Condition Kennametal B1110 INS.TP-32-3DL81 Boring Bar 1.25" X 8-3/4" Comes with 4 Inserts
|
|
|
CRITERION S-1 1/2" OFFSET BORING HEAD 3/4" STRAIGHT SHANK
Up for Bid- Criterion Boring Head S-1 1/2" with 3/4" Straight Shank.Recently retired Machinist.Giving up his tools! Thanks. For looking at my site!
|
|
|
USED SANDVIK VARILOCK-63 TRUBORE BORING TOOL 391.68-090-63-130 (3.937" - 4.921")
LISTING IS FOR A USED SANDVIK VARILOCK TRUBORE BORING TOOL BRAND- SANDVIK TRUBORE PART# 391.68-090-63-130 BORING RANGE- 3.937" to 4.921" COUPLING- VARILOCK-63 GAGE LENGTH- 6.693" USES TRUBORE BORING SLIDES PART# R416.3-1_ 125-40(NOT INCLUDED) APPLICATION- GENERAL USE FOR ROUGH BORING CONDITION- VERY GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) ... morePLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. to
|
|
|
Boring Bar Lathe Tool Post Williams 1-B Multi size 1/2", 3/4" 1 1/8" Nice cond.
Boring Bar Lathe Tool Post Williams Model 1-B Multi Bar sizes 1/2" 3/4" 1 1/8" Bolt is 3/4 OD, T-Nut is 1 7/8" Wide X 3/8" Thick, Nice condition. Free shipping in USA ONLY.
|
|
|
LOT of 10 SOLID CARBIDE BORING BARS. 1/4 & 5/16 & 3/8 SHANK X APPROX 2 in. OAL
10 Used SOLID CARBIDE BORING BARS 1/4& 5/16& 3/8 SHANK APPROX 2 in. OAL~ Good Condition $5.80 Priority Mail Shipping USA"Get It Fast" THERE WILL BE NO MORE BIDS ACCEPTED FROM ITALY or GREECE Payment MUST be received 7 days after auction end. Powered by
|
|
|
sandvik 3/4" solid carbide boring bar.coolant thru.interchangeable head.no head.
this item was sold before& returned because there was a broken m3 screw i did not see.15 mins.to drill out.buyer was not much of a machinist.should be fine now.the other holes are m 3.5.i will take a return since i dont have a head to check it.if you want return shipping charges please contact me before leaving negative feedback.paypal only lets me return original price paid.
|
|