Log Grapple Log Skidder Grapple Skidder Prentice Loader Tree Spade Prentice Log Log Loader John Deere Skidder Oliver Tractor 66 77 88 770 Tractor 66 77 88 770 880 Oliver Tractor 77 88 770 880 Firewood Processor Forestry Equipment Morbark Timberjack Oliver Tractor S-55 550 Feller Buncher Climbing Saddle Portable Sawmill Grain Moisture Tester Oliver Tractor 66 Hydraulic Pole Timberjack Skidder Logging Skidder Brush Bandit Log Forestry Mulcher Knuckle Boom Log Trailer Grapple Truck Tree Climbing Gear Used Skidder Moisture Tester Hydro Ax Oliver Tractor 1750 Ford F700 Grapple Grapple Saw Used Grapple Tree Climbing Harness Forestry Mulcher Oliver Tractor 1750 1800 1850 1950 Portable Mill Brush Chipper Stump Grinder Used Sawmill Log Truck Bucket Truck Tree Service Sawmill Blade Climbing Spike Skidder Tire Logging Equipment Cable Skidder Wood Chipper Tree Equipment Frick Sawmill Franklin Log Weaver Saddle Buckingham Tree Climbing Climbing Spur Buckingham Tree Buckingham Tree Pole Leg Gaffs Kubota Rtv Atv Side By Side 4 Firewood Tree Climbing Belt Oliver Tractor 70 Clinder Magneto Tree Pole Climbing Spike Log Skidder Tire Chains Horizontal Grinder Pto Chipper Antique Power Magazine Bandit Model Climbing Gear Chainsaw Model Log Splitter Log Winch Chainsaw Stock 1855 1950T 1955 Tree Planter Knuckleboom Mulching Belt Pulley Magazine Harness Strap Spur Spike Tub Grinder John Deere 440 Wood Splitter Climbing Spike Gaffs Woodmizer Pole Climbers Wallenstein Log Equipment Tree Pole Climbers 77 S77 88 Trailer Mounted 4 Wheeler Off Road Utility Chainsaw Mill Injection Pump Woodmizer Sawmill Wood Chipper Shredder Lumber Mill Pruning Skidder Chains Ihc Mccormick Slasher Saw 2 Man Chainsaw 3 Point Hitch 3 Pt 4 Wheel 4X4 Diesel Allis Chalmers Belt Harness Belt Pulley Belt Strap Cast Iron Chain Saw Mills Chainsaw Chipper Climbing Belt Climbing Harness Climbing Spikes Combine And Save Diesel Engine Diesel Tractor Dump Truck Farm Equipment Farm Tractor Farmall Cub Fire Pump Fire Truck Flat Bed Trailer Forest Service Forestry Forestry Equipment Saw Sharpner Grinder Hard Hat Heavy Duty Heavy Equipment Husqvarna Chainsaw Hydraulic Cylinders Hydraulic Pump John Deer A John Deere John Deere Diesel John Deere Tractor Loader Log Lathe Logging Low Hours Magazine 2004 Magazine 2008 Manual Oem Massey Ferguson Mill Oliver Tractor Operational Manual Power Steer Processor Saddles Safety Belt Sale Brochures Saw Saw Mills Skid Loader Skid Steer Slabbing Mill Speedpro Wood Splitter Starter Stihl Chainsaw Tires Track Tractors Trailer Tree Tree Climbing Tree Cutters Tree Pole Tree Pole Climbing Tree Saddle Tree Shredder Chopper Truck Vermeer Vintage Antique Vintage Disston Wheel Loader Winch Wood Grinder Zero Turn Mower Chainsaw Sawmill Logging Winch Band Mill Log Tongs Loftness Logsplitter Band Sawmill Portable Lumber Mill
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
19.99
Buy It Now
$0 Shipping
Condition: New
Location: Louisville,CO,USA
$
553.66
Buy It Now
$259 Shipping
Condition: New
Location: Hayward,CA,USA
$
4,500
Buy It Now
$0 Shipping
Condition: Used
Location: Newtown,CT,USA
$
750
Buy It Now
$0 Shipping
Condition: New
Location: Cresco,PA,USA
UNIVERSAL SAWMILL LOG TURNER Take the back breaking work out of rotating those heavy logs! This universal hydraulically powered log turner will have your ... moresaw milling operation running more smoothly and efficiently in no time. Whether you are strictly a hobbyist or saw milling for profit this will be sure to make you say"Why didn't I do this sooner? Conveniently folds down under the log supports when not in use. Spring loaded design automatically comes up and adjusts to any size log. Accurately turns the logs and cants to any degree. No point spending all that money on upgrading to a hydraulic mill when all you really need is this unit! Don't let the hard labor involved in saw milling stall your lumber making! A hydraulic log turner can make a huge difference! I have this unit installed on my Wood-Mizer LT40. Will work on any sawmill. Easy installation. Simply clamp and weld or drill holes and bolt it down. Includes hydraulic cylinder. All pins, bushings, springs, and hardware. Does not include hydraulic fittings or hoses. Unit will come black painted. Can be powered by many hydraulic setups including but not limited to: 12 volt electric over hydraulic pump Snow plow pump Auxilliary hydraulics from a tractor Dump body pump Small hydraulic power pac Log splitter hydraulics WE STRIVE FOR 100% CUSTOMER SATISFACTION SO IF YOU HAVE ANY ISSUES PLEASE CONTACT US AND WE WILL MAKE IT RIGHT. PLEASE DO NOT LEAVE ANYTHING LESS THAN 5 STAR FEEDBACK RATINGS BEFORE GIVING US A CHANCE TO DO SO. THANKS FOR YOUR BUSINESS! PAYMENT 1. Paypal is always accepted. 2. Credit card is accepted. Call 570-595-5000 SHIPPING 1. Shipping within 2 business days 2. USPS priority unless otherwise noted in the description. RETURNS 1. Returns are accepted within 14 days. 2. If item is not as described you will be reimbursed for return shipping upon receipt of returned item. 3. If item is returned due to any other reason the buyer is responsible for return shipping and a 20% restocking fee will be deducted from the return amount
$
4,395
Buy It Now
$149.95 Shipping
Condition: New
Location: Thorntown,IN,USA
$
24,500
Buy It Now
Free Shipping
Condition: New
Location: Canada
$
1,800
Buy It Now
Free Shipping
Condition: Used
Location: Rogersville,MO,USA
$
1,999
Buy It Now
$0 Shipping
Condition: Used
Location: Newtown,CT,USA
$
59.95
Buy It Now
$0 Shipping
Condition: New
Location: Chewelah,WA,USA
$
46.99
Buy It Now
$0 Shipping
Condition: New
Location: Chewelah,WA,USA
$
56.48
Buy It Now
$0 Shipping
Condition: New
Location: Adams Center,NY,USA
$
46.99
Buy It Now
$0 Shipping
Condition: New
Location: Chewelah,WA,USA
1
 In 

Past Items  
 
2009-P Lincoln Formative Years Error Cent WDDR-086 rated a"best of" error per Wexler's DoubledDie website This coin also shows date doubling(hub error? on the obverse taken from a just-opened bank box. Uncirculated mint state sample housed in a 2X2 and handled with gloved hands I ship via USPS with tracking provided USA delivery only please use PayPal for your purchase Thank You
Bank Box of 50 rolls of 2009-D Formative Years Cents. Shipping in a flat rate box is $12.95. Happy to combine shipping to save you money! Also check out my lot of 2012-D Rolls. Thanks for your interest. Chris and Charity
2009 P Lincoln Error Roll features the reverse error wddr-086 on one end unopened. Unsearched, and uncirculated total of 50 coins considered on Wexler's Doubleddie Guide as a"Best Of" error not listed(my new discovery) as a die marker for the wddr-086 is the obverse doubling on the date(see pics) Die cracks are also found in these rolls I ship free via USPS 1st class mail w/tracking provided U.S.A. only please use PayPal for your purchase Thank You
Used North star logsplitter. Good condition. Gas, 5.5 Honda motor Posted with
I AM TEARING DOWN A LOG SPLITTER AND THIS CAME OFF THE SPLITTER. IT IS A STANDARD SIZE HOUSING FOR THE RETURN LINE FILTER. NO RESERVE!
This is a Heavy Duty Cylinder capable of 4500# hydraulic oil pressure. This is the last 4" cylinder you will ever need. It will last forever. It is Tough. Built to the most extreme standards. 25" Stroke. Rod is 2' Chrome. 4" Bore It is heaver than any other cylinder its size. Very heavy to lift Pick up only from Hastings on Hudson 10706 zip code.
This is a Heavy Duty Log Splitter Tie Rod Cylinder capable of 4500# hydraulic oil pressure. In Perfect Condition. Built to the most extreme standards. 4" Bore 25" Stroke. 2" Chrome Rod. Pick up only from Hastings on Hudson 10706 zip code.
Ready to use log splitter with recent new 6.5 HP Briggs engine. pick up only on this item in Levittown Pa 19056. this has always been stored indoors. terms are cash in person. thanks for looking.
MTD PRODUCTS HYDRAULIC LOGSPLITTER HYDRAULIC"PARTS" CONTROL VALVE MTD PART#918-04706P/718-04706P CONTROL VALVE REMOVED FROM MODEL#24BF572B711- DOM#2012- CONTROL VALVE HAS LOW HOURS- LESS THAN 5 HOURS CONTROL VALVE LEAKS FROM REAR SPOOL CAP CONTROL VALVE BEING SOLD"AS IS" FOR"PARTS" OR"DIY" REPAIR PROJECT
MTD PRODUCTS HYDRAULIC LOGSPLITTER GEAR HYDRAULIC"PARTS" PUMP MTD PART#918-04128/718-04128 PUMP SEIZED FROM NO FLUID START UP PUMP BEING SOLD"AS IS" FOR"PARTS" OR"DIY" REPAIR PROJECT
2009 P& D Lincoln Cent LOGSPLITTER SET PGCS Certified BU RETURN POLICY: IF YOU FEEL THE NEED TO RETURN A PURCHASE. PLEASE CONTACT US THRU E-BAY MESSAGES SO WE MAY POSITIVELY RESOLVE ANY ISSUE. IF A PURCHASE IS RETURNED, THE SALE PRICE OF THE ITEM WILL BE REFUNDED UPON RECEIPT OF THE ORIGINAL ITEM BY US ACCORDING TO APPLICABLE eBAY& PAYPAL POLICIES[SHIPPING CHARGE/RETURN POSTAGE MAY OR MAY NOT BE REFUNDED DEPENDING ON THE SITUATION] ALL ITEMS MUST BE RETURNED IN ORIGINAL. UNOPENED INTERNAL PACKAGING(SEALED FLIPS, CASES, ETC) Code at end of title is an inventory code Automated combined shipping deals are in effect for most items. Please note: All items limited to domestic/United States sale
I have up for auction a very nice Husky 22 ton logsplitter. It has been lightly used only purchased a couple months ago. I am selling it due to health reasons. It has never been on the road. It was assembled on my property and never left. I didn't get to use it as much as I would like to. I will start this auction at.99 cents with no reserve. This item is for local pick up only. Auction will last for 3 days. You must pick this up within 48 hours of auction end. I will expect immediate payment when this auction is done by PayPal. I will also accept cash when you pick up the splitter. Good luck and happy bidding.
Kelley Logsplitter Owner's Manual/ Operating Manual- Form No. 19800601 26 Pages. Measures 11" X 8 1/2" Excellent Plus Used Condition
This is a lot of 3 vintage splitting wedges that ar in good sound condition with some mushromming on ends. The wedge is 9 1/2" end to end and 2 1/8" across bit and weighs 5 lbs 12 ozs marked Boss Japan 6 The wedge is 8 3/4" end to end and 2 1/2" across bit and weighs 4 lbs 14 ozs marked heat treated O 5 The wedge is 6" end to end and 5 5/8" across bit and weighs 3 lbs 8 ozs Please refer to close up pics We do combine items to save on shipping cost.
This is a used factory MTD O.E.M. fender. It is no longer available from the dealer. The fender was removed from a 27 ton log splitter from the right side of the equipment. The color is green and it comes with the inner fender support bracket and necessary bolts to attach it to the body. If you have any questions please ask. Thank-you for your time. Jeff Saloka(440)669-0555. Powered by The free listing tool. List your items fast and easy and manage your active items. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1456e87fa45-0x10b-
Listed for auction is one(1) John Deere Model#4 Hydraulic Log Splitter. This unit(with use of the adapter plates shown in the photos) fits the following John Deere Lawn and Garden Tractors. 120. 140, 300, 312, 314, 316K, 316O, 317, 318, 330, and 332's. This unit is complete even including the Vee Belt to drive the unit from a source tractor(tractor not included in this sale and to be furnished by others) It is in very good condition and has had very little use. This unit mounts to the front of a source tractor which provides power to a self contained hydraulic system mounted to the Splitter main beam though use of a Vee Belt from the tractor PTO Clutch. Hydraulic pressure provides ample splitting power through use of a hydraulic ram cylinder mounted to the Splitter beam that is controlled directionally through use of an integral mounted ... morelever operated control valve. For those who follow and collect the John Deere LGT's. You know that these units do not come up for sale every day and it is unusual to find one this complete and in this condition. But because it is used. This Log Splitter is being sold"As-is/Where-is" with no warranty expressed or implied. It is too large for shipping and must be picked up in Elkhart. Indiana, 46514. I have it for sale locally and reserve the right to end this listing early if the tractor sells locally. Payment must be in the form of PayPal, or cash on pickup. Payment must be made within 7 days from auctions end. However reasonable time required to pick up the unit is negotiable as long as the unit has been paid for. Feel free to ask questions. I will try my best to get back to you with answers to them.
Up for sale is a log splitter Power Pack. The engine is a 5HP H50 h50 T ecumseh. It starts up without much trouble and ha s a new spark plug an d air filter. The downside is that the engine is weak and it has white blow-by out the breather tube when under a load. When it was on the splitter it didn't seem to have much power. The bracket that mounts the pump to the engine is included and it's very sturdy. The LoveJoy coupler is also included; 5/8" shaft on the engine and 1/2" shaft on the pump. The pump has been taken down and put back together with a new input shaft seal and new internal O-rings. All should be well with the pump. There was no out of the ordinary shaft play on the pump. The pump spec plate reads: Norther Hydraulics S1012 Phone 612-894-8 310 Date Code:8590 Please not e that this will ship without any fluids ... moreand may be dismantled to some extent for packaging reasons. Ship s to the lower 48 Thank yo u for looking!
I purchased this splitter at Menards less than a year ago for over $ 1.000.00 It has been used about a dozen times over one season. I am moving and although I hate to part with it. There's no room in the POD! It can be towed but only up to 45 mph!
Up for sale is a Hydraulic Pump with the casting number: XA163C. It has a 3/4" Shaft with 13 Splines. I can turn the shaft by hand most of the way and then it hangs up. The pump is in unknown condition. Ships via usps to the lower 48. Will ship outside the lower 48 for an adjusted rate. Thanks for looking!
This is a vintage collins single bit axe head that is free of wood and is in good condition with clear collins logo. The head is 8 3/8" end to end and 4 7/8" across and the axe weighs 4 lbs 12.5 ozs Please refer to close up pics
This is a vintage splitting wedge that is in good condition with no visible markings. The head is 6" end to end and 4" x 4" across points and the wedge weighs 3 lbs 3.1 ozs Please refer to close up pics
This is a M5 splitting falling wedge that is in good condition with great markings. The head is 9 3/8" end to end and 2 3/8" across bit and the wedge weighs 4 lbs 10.0 ozs marked M5. Please refer to close up pics
This is a Collins USA splitting falling wedge that is in great condition with good markings. The head is 9 1/2" end to end and 2 1/2" across bit and the wedge weighs 4 lbs 10.3 ozs. Please refer to close up pics
This is a vintage double bit axe head that is free of wood and in good condition with no visible makers marks The head is 10 1/8" end to end and 4 7/8" across axe bits and the axe weighs 3 lbs 9.9 ozs Please refer to close up pics We do combine items to save on shipping cost. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14738c8d302-0x115-
This is a USM 8 Collins splitting maul axe head that is free of wood and in excellent condition with excellent markings USM 8 only The head is 9" end to end and 3 7/8" across axe bits and the axe weighs 7 lbs 3.7 ozs marked 8 Please refer to close up pics We do combine items to save on shipping cost.
This is a vintage Zenith Marshall-wells single bit axe head that is free of wood and is in great condition with excellent markings with some mushrooming on end. The head is 7 5/8" end to end and 4 7/8" across and the axe weighs 3 lbs 14.8 ozs Please refer to close up pics
This is a lot of 2- 8 lb splitting maul axe heads that are free of wood and in excellent condition and painted black. splitting maul head is 8 5/8" end to end and 3 3/4" across axe bit and the head weighs 7 lbs 7.1ozs marked Mexico 8 splitting maul head is 8 3/4" end to end and 3 7/8" across bit and weighs 7 lbs 10.9 ozs marked Mexico 8 Please refer to close up pics We do combine items to save on shipping cost.
This is a lot of 4 single bit axe heads that is free of wood and in good to great condition SB head is 7 5/8" end to end and 4 3/4" across bit and weighs 3 lbs 9.4 ozs unknown SB head is 7 5/8" end to end and 4 1/8" across bits and weighs 3 lbs 6.9 ozs unknown SB head is 6 5/8" end to end and 3 7/8" across bit and weighs 2 lbs 10.1 ozs unknown Hatchet head is 5" end to end and 3" across bit and weighs 1 lb 4.3 ozs unknown Please refer to close up pics We do combine items to save on shipping cost.
This is a vintage 3 1/2 lb Collins single bit axe head that is free of wood and in great condition with great markings The head is 7 5/8" end to end and 4 5/8" across axe bit and the axe heads weighs 3 lbs 7.1 ozs. Please refer to close up pics
This is a vintage 4 lb single bit axe head that is free of wood and in excellent condition with no visible makers marks The head is 8" end to end and 4 3/4" across axe bit and the axe weighs 4 lbs 3.1 ozs. The handle eye is 2 3/8" x 3/4" across center Please refer to close up pics We do combine items to save on shipping cost. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-147c9e43512-0x111-
This is a vintage collins 4 lb single bit axe head that is free of wood and in good condition with good makers marks also has some initials see pic no 7 The head is 7 3/4" end to end and 4 3/4" across axe bit and the axe weighs 4 lbs 2.8 ozs. The handle eye is 2 3/8" x 3/4" across center Please refer to close up pics We do combine items to save on shipping cost. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-147c9e434e1-0x10c-
These are two vintage 8 lb splitting maul axe heads that are free of wood and in great condition. US 88 head is 9 1/8" end to end and 4" across axe bit and the axe weighs 7 lbs 9.0 ozs marked 8 unknown is 9 1/2" end to end and 4 1/4" across bit and weighs 7 lbs 8.0 ozs marked 8 Please refer to close up pics We do combine items to save on shipping cost.
This is a M1/6 lb splitting maul axe head that is free of wood and in good condition with great markings. The head is 8" end to end and 3 3/4" across axe bit and the axe weighs 5 lbs 11.0 ozs marked 6. Please refer to close up pics
These are 2 firewood tools that are in good to great condition and free of wood. 4 lb Splitting wedge head is 7 3/8" end to end and 3" across bit and the head weighs 4 lbs 0.2 ozs M8 splitting maul head is 8 7/8" end to end and 3 7/8" across bit and it weighs 7 lbs 8 ozs marked 8 Please refer to close up pics We do combine items to save on shipping cost.
ARIENS 22 TON LOGSPLITTER 4" HYDRAULIC CYLINDER CYLINDER HAS DAMAGED/STRIPPED CONTROL VALVE THREADED PORT ARIENS NEW#51702600 ARIENS OLD#04569800 CYLINDER WAS REMOVED FROM MODEL#917011 WITH ONLY 5 HOURS AND MAY BE USED ON OTHER MODELS ARIENS LIST PRICE $589.90 + S/H
This is a vintage craftsman single bit axe head that is free of wood and in great condition with great markings and a little mushrooming on poll edge The head is 7 5/8" end to end and 4 1/2" across axe bit and the head weighs 3 lb 8.9 ozs Please refer to close up detailed pics
This is a USA 8 lb splitting maul axe head that is free of wood and in good condition with good markings The head is 8 7/8" end to end and 3 7/8" across bit and weighs 7 lbs 13.1 ozs Please refer to close up detailed pics for the best description of this item.
This is a vintage 14" cedar froe head that is free of wood and in great condition with no visible markings The head is 17 1/2" end to end and 14" across cutting edge and the froe head weighs 6 lbs 5.5 ozs the spine is nice and straight and 5/8" thick Please refer to close up pics We do combine items to save on shipping cost.
This is a US97 4 lb splitting wedge that is in great condition with great makers marks. The head is 8 1/4" end to end and 2 3/8" across bit and the head weighs 3 lbs 14.8 ozs marked 4 Please refer to close up detailed pics for the best description of this item.
These are 2 vintage single bit axe head that is free of wood and in great condition with great markings D5 head is 7 1/2" end to end and 4 3/4" across bit and weighs 3 lbs 8.0 ozs D20 head is 7 1/2" end to end and 4 3/4" across bit and weighs 3 lbs 11.0 ozs Please refer to close up pics We do combine items to save on shipping cost.
This is a vintage 5 lb single bit axe head that is free of wood and in is in good condition with no visible makers marks. The head is 8 1/2" end to end and 4 7/8" across axe bit and the axe weighs 4 lbs 12.1 ozs with mushrooming on poll edges Please refer to close up detailed pics for the best description of this item.
This is a Collins M5 single bit axe head that is free of wood and in is in good condition with great markings and marked M5 only The head is 8 1/4" end to end and 4 5/8" across axe bit and the axe weighs 4 lbs 8.5 ozs marked 5 Please refer to close up detailed pics for the best description of this item.
13 HP Log Splitter I just installed a New 4 x 24 inch custom welded cylinder-Ported for high flow. 2 new larger hoses(more flow) comes with a spare rebuilt 4 x 24 inch tie rod cylinder with hoses.see pics( before conversion) 28 GPM pump* Very fast cycle time! 7 secs. 10 gal Hydraulic tank. Lock return control valve. 4 way wedge. Road worthy-2" receiver. Trailer wheels and hubs Front and rear stands. Built for personal use- I stopped burning wood and no longer need has been used very little- Just replaced the gas tank and carb- new oils- sat around unused) needs absolutely nothing The engine is a 13 HP Honda clone with electric start however I never connected the starter or used it- Engine starts 1-2 pulls every time. This is not your typical home center toy and will split a cord of wood in 1/2 the time it would take with a typical home ... morecenter splitter. Please message us to discuss shipping options* otherwise local pick up.
35 Ton Logsplitter. Works good, 8hp Honda engine. Open to serious offers, message me. Keep in mind these new costs about $3000. Or so
Vintage True Temper U.S.A. 6 lb Splitting Maul Axe Head Firewood Logsplitter. Please look at all photos carefully before bidding. Thanks!
RELISTED 13 HP Log Splitter I just installed a New 4 x 24 inch custom welded cylinder-Ported for high flow. 2 new larger hoses(more flow) comes with a spare rebuilt 4 x 24 inch tie rod cylinder with hoses.see pics( before conversion) 28 GPM pump* Very fast cycle time! 7 secs. 10 gal Hydraulic tank. Lock return control valve. 4 way wedge. Road worthy-2" receiver. Trailer wheels and hubs Front and rear stands. Built for personal use- I stopped burning wood and no longer need has been used very little- Just replaced the gas tank and carb- new oils- sat around unused) needs absolutely nothing The engine is a 13 HP Honda clone with electric start however I never connected the starter or used it- Engine starts 1-2 pulls every time. This is not your typical home center toy and will split a cord of wood in 1/2 the time it would take with a typical ... morehome center splitter. Please message us to discuss shipping options* otherwise local pick up.
35 ton Huskee logsplitter. 342 cu in B&S engine. horizontal or vertical splitting. will split 25" logs. and will split the very hard logs. Very good condition. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-148eee660cc-0x105-
RELISTED- LOWER RESERVE 13 HP Log Splitter I just installed a New 4 x 24 inch custom welded cylinder-Ported for high flow. 28 GPM pump* Very fast cycle time! 7 secs. 10 gal Hydraulic tank. Lock return control valve. 4 way wedge. Road worthy-2" receiver. Trailer wheels and hubs Front and rear stands. Built for personal use- I stopped burning wood and no longer need has been used very little- Just replaced the gas tank and carb- new oils- sat around unused) needs absolutely nothing The engine is a 13 HP Honda clone with electric start however I never connected the starter or used it- Engine starts 1-2 pulls every time. This is not your typical home center toy and will split a cord of wood in 1/2 the time it would take with a typical home center splitter. Please message us to discuss shipping options* otherwise local pick up.
Prince 25GPM Three Spool Logsplitter Detent Hydraulic Valve RD536CCCEAA5A4B1 $249.95 JAY-1027-Valve-3461 3461 We bought this to use on our forklift and it was the wrong type. We purchased the correct model and are just trying to get our money back out of this one. It does not come with the handles. Thanks for looking. Rebuilt Prince Hydraulic 3 spool open center directional valve. Model# RD532CCCAAA5A4B1. 3000psi rated. 25GPM max. 3/4" NPT in/out and 1/2"NPT work ports. Spring Centered handles return to center when released. Integrated relief valve set@ 2000psi. WARNING: I nternational Shi p ments TAKE MORE TIME! WE SHIP WORLDWIDE. Unless you paid $35 or more postage. There is NO ONLINE TRACKING. And it will take 2-3 weeks longer than Priority: All Foreign Buyers: USA Dept. of HOMELAND SECURITY now processes all packages leaving ... morethe USA since 9/11. This adds 1-2 WEEKS processing time. Import duties. VAT, taxes, or tariff charges are not included in the item price or shipping costs. Customs duties or VAT is the buyer's responsibility. You may need to go to YOUR LOCAL POST OFFICE to pay and pick up your items. ALLOW 4-6 WEEKS for delivery. HAVE MERCY on our Feedback PLEASE 5 Star Ratin g s are terribly misleading! A"4" is NOT Good. Acceptable, or ok A"3" is NOT Neutral whatsoever A"2" or a"1" is a catastrophic event that hurts sellers. Raises prices. Too many will ban an account! WE MUST have 100% 5's" to remain in good standing as a seller on this site. Please contact us if you will not leave a"5" for us(or leave blank) DON'T Use"4" for SHIPPING TIME Sellers are allowed 1-3 days to SHIP, 3-11 business days to DELIVER. Free shipping = Parcel Post TIME! Shipping time IS NOT Time to Deliver! PLEASE LEAVE O NLY! Return Policies- EMAIL. EMAIL, EMAIL Defective or Damaged item rarely happens. BUT if it did. 1. Always have a backup plan if item is IMPORTANT 2. We can't fix immeditately. So please be patient 3. Don't be angry wit
Had this couple years. Ddon.t really use it. Not very powerful but works with med size logs and smaller. Had to squirt starter fluid to get started after couple years of setting but ran and worked after that. May eventually need carb. cleaned. Buying as-is Not sure what its worth so Ill put a buy now with best offer. if I like offer will sell. Pick up only in 30 days It is kinda heavy can assist loading. Located in Kingsville ohio 44048 right off I-90
ARIENS 22 TON LOGSPLITTER WELDED RAM WEDGE RAM WEDGE HAS DAMAGED CYLINDER ROD MOUNTS ARIENS NEW PART#04541251 RAM WEDGE WAS REMOVED FROM MODEL#917011 WITH ONLY 5 HOURS AND MAY BE USED ON OTHER MODELS ARIENS LIST PRICE $289.00+ S/H
ARIENS ZOOM 42 ZERO TURN BANNER APPROXIMATELY 8FT LONG WITH LOG SPLITTER AND COMMERICAL PUSH MOWER SHIPPING IS 9.99
Used Tennant sweeper hydraulic filter with mount. In good working condition. Thanks for looking.
This is a lot of 21 used axe handle wedges in good condition with rust older wedges Please refer to close up detailed pics for the best description of this item. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-149ee43f05b-0x10d-
Very Welcome to my Auction! Vintage Logsplitter Tractor Truck Axle Mounting Blacksmith Tool Old used condition for collector or as a useful helper. Please exam and zoom all the pics for details and condition and rate yourself. The pics are part of the description and show you the details. What you see is what you will receive. Heavy packet 10 kg. 22 lb. Thanks for your visit and have fun with bidding! Payments are due within 3 days after auction. The item will be shipped within 2 days after payment is received. We combine shipping whenever possible and make sense. Since we choose always the cheapest way for shipping. Please contact us before payment for any special requests like insurance etc. All items are sold AS IS. Please ask questions prior to bidding and we will answer them to the best of our ability. All sales are final! Some special ... morecircumstances might be considered at our discretion and only the amount of the bid would than be refunded. No refund on shipping charges. Buyer will pay return shipping by Priority Mail within 7 days of receiving item and package must be insured. Your positive feedback is very much appreciated. Thanks! Please contact us. If an item does not meet your expectations. Please check out our other auction items. International Buyers– Please Note! a) Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. b) Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.
Call 5706283847 to come and view Used. Very good condition, works great. 8 HP Honda engine 15 ton Dimensions 45 wide. 79 long, Should be hauled long distances Call 5706283847 with questions. Free local pick up located in port carbon pa 17965
Used(about 2 hours) Log splitter Valve. Leaked a bit.threads? I didn't want to thread lock it in.
ARIENS/ENERGY MANUFACTURING 22 TON LOGSPLITTER HYDRAULIC"PARTS" CONTROL VALVE W/ LEVER& PIVOT LINK ARIENS PART#03846300 THIE ITEM WAS REMOVED FROM A UNIT(ARIENS MODEL#917011) WITH 1 HOUR OF USE THIS ITEM IS BEING SOLD"AS IS" FOR"PARTS" OR"DIY" REPAIR PROJECT THIS"PARTS" VALVE LEAKS FLUID FROM REAR SPOOL CAP- THE"PARTS" CONTROL VALVE WORKS BUT LEAKS
MTD/TROYBILT LOGSPLITTER"PARTS" CONTROL VALVE ASSY OEM PART#718-04706P REMOVED FROM MODEL#24BL59M5766 SERIAL#1E022H40045 THIS ITEM IS BEING SOLD"AS IS" FOR"PARTS" OR"DIY" REPAIR THIS ITEM DOES NOT WORK AND LEAKS OIL FROM REAR SPOOL COVER
MTD/TROYBILT H/V LOGSPLITTER HYDRAULIC GEAR"PARTS" PUMP MANUFACTURED BY CONCENTRIC OF ROCKFORD.IL MTD PART#718-04127 MTD PART#918-04127 THIS ITEM IS BEING SOLD"AS IS" FOR"PARTS" OR"DIY REPAIR PROJECT THIS ITEM DOES NOT WORK DUE TO NO SECOND HYDRAULIC STAGE
big heavy duty hydraulic cylinder from a hough ih wheel loader for sale on this auction. the cyl is 8 inches outside diameter so it should be 7 inch inside. the shaft size is 3-1/2 inches the pins are 4" on the big end and 3-1/2" on the rod end. there is some oil leakage from the seal so I would recommend putting a new seal kit in it. it might have even longer than 3 foot stroke but I will say 3 foot on this ad. we can ship it but will need your zip code for a quote. thanks and good luck.
SEARS CRAFTSMAN 27 TON HYDRAULIC LOGSPLITTER WITH NEW HYDRAULIC VALVE. NEW HI-PRESSURE SIDE HOSE AND NEW HYDRAULIC CYLINDER. FAST 14 SEC CYCLE. BRIGGS& STRATTON 6.5 HP VERTICAL MOUNT MOTOR, FENDER KIT AND TRAILER HITCH. PICK UP ONLY IN THE LOS ANGELES AREA. ZIP CODE 91390. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14b7110e508-0x10e-
This is a Dasco Made in USA 6 lb splitting wedge that is in excellent condition with excellent markings It is 9 3/4" end to end and 2 1/4" across the bit and the wedge weighs 5 lb 14 ozs Please refer to close up detailed pics.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b7f6e9366-0x10b-
This is a USA 6 lb splitting maul axe head that is free of wood and in great condition with good markings It is 8 1/4" end to end and 3 5/8" across the axe bits and the head weighs 6 lbs 2 ozs Please refer to close up detailed pics
This is a USM 6 lb splitting maul axe head that is free of wood and in great condition with great markings It is 8 1/4" end to end and 4" across the axe bits and the head weighs 5 lbs 4.5 ozs marked 6 Please refer to close up detailed pics
This is a true temper A29 single bit axe head that is free of wood and in great condition with no makers markings missing true temper paper label It is 7 5/8" end to end and 4 7/8" across the axe bits and the head weighs 3 lbs 12.8 ozs Please refer to close up detailed pics
this is a used troy bilt tiller it is the pto model. comes with a log splitter and a generator that connects to were the tines are. there are wheel weights and new tines and a few plows found this in grand pops barn has not run in about 8 years. log splitter has a crack in one hose. everything is untested and sold as is engine turn over with the pull cord. this model also has electric start.it also has a 11 hp motor. been looking all over and have not found anything like this any were. there is no shipping and must be picked up with in 7 days of end of auction unless we work some thing out. you must also pay in full with in 7 days. cash on pick up. item is for sale locally so i can end the auction at anytime
This is a Dasco Made in USA 4 lb splitting wedge that is in excellent condition with excellent markings It is 9" end to end and 1 7/8" across the bit and the wedge weighs 3 lb 15.5 ozs Please refer to close up detailed pics
This is a 3 1/2 lb single bit axe head that is free of wood and in good condition with no visible makers markings with swirl scuff marks on head both sides It is 7 1/2" end to end and 4 5/8" across the axe bit and the head weighs 3 lbs 8.2 ozs Please refer to close up detailed pics
This is a vintage Collins single bit axe head that is free of wood and in great condition with great makers markings and it still has some of the original foil label on it It is 7 1/2" end to end and 4 1/2" across the axe bit and the head weighs 3 lbs 6.1 ozs Please refer to close up detailed pics
This is a vintage M1-8 lb splitting maul axe head that is free of wood and in great condition with great markings and still has part of the original Collins foil lable It is 8 7/8" end to end and 3 3/4" across the axe bits and the head weighs 7 lbs 6 ozs marked 8 Please refer to close up detailed pics
This is a vintage Warren-teed No. 112 8 lb splitting maul axe head that is free of wood and in good condition with great markings It is 9 3/4" end to end and 3 3/4" across the axe bit and the head weighs 7 lbs 10.1 ozs marked 8 Please refer to close up detailed pics
This is a vintage KR Tools 6 lb splitting maul axe head that is free of wood and in great condition with great markings It is 8 1/2" end to end and 3 5/8" across the axe bit and the head weighs 6 lbs 1.0 ozs marked 6 Please refer to close up detailed pics
This is a M6 splitting maul axe head that is free of wood and in great condition with great markings. The head is 8 1/4" end to end and 3 3/4" across axe bit and the head weighs 5 lbs 9.0 ozs Please refer to close up detailed pics
This is a vintage USA M6 splitting maul axe head that is free of wood and in good condition with great markings with a couple stress fractures on sledge end see pic no 6 It is 7 3/4" end to end and 3 1/2" across the axe bits and the head weighs 5 lbs 9.0 ozs marked 6 Please refer to close up detailed pics
This is a vintage Weco 8lb splitting maul axe head that is free of wood and in great condition with great markings It is 9" end to end and 4" across the axe bits and the head weighs 8 lbs 3.4 ozs marked 8 Please refer to close up detailed pics.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14bf6129410-0x107-
This is a vintage 2 1/2 lb tomahawk axe head that is free of wood and in good condition with no visible markings It is 6 1/2" end to end and 4 1/8" across the axe bit and the head weighs 2 lbs 9.4 ozs Please refer to close up detailed pics
This is a 3 1/2 lb Cedar pattern single bit axe head that is free of wood and in good condition with no visible markings and it has mushrooming and nicks on poll edges It is 7 1/2" end to end and 4 5/8" across the axe bit and the head weighs 3 lbs 5.4 ozs Please refer to close up detailed pics
This is a US 98 Cedar pattern single bit axe head that is free of wood and in good to great condition with good markings and it has mushrooming on poll edges It is 8" end to end and 4 3/4" across the axe bit and the head weighs 3 lbs 10.7 ozs Please refer to close up detailed pics
This is a vintage 5 lb forest king single bit axe head that is free of wood and in great condition with no markings It is 8 1/4" end to end and 4 7/8" across the axe bit and the head weighs 4 lbs 10.6 ozs Please refer to close up detailed pics
This is a lot of firewood cutting tools heads that is free of wood and in great condition with great markings Splitting maul head is 8 3/4" end to end and 3 7/8" across the axe bits and the head weighs 7 lbs 11.1 ozs marked 8. Sledge hammer head is 6 1/2" end to end and 2 3/8" across hammer faces and the head weighs 8 lbs 3.1 ozs marked 8 Please refer to close up detailed pics
This is a USA M8 lb splitting maul axe head that is free of wood and in good condition with good markings It is 9" end to end and 3 3/4" across the axe bits and the head weighs 8 lbs 8.8 ozs marked 8 Please refer to close up detailed pics.
This is a M6 lb splitting maul axe head that is free of wood and in good condition with good markings It is 8 1/4" end to end and 3 3/4" across the axe bits and the head weighs 5 lbs 7.0 ozs marked 6 Please refer to close up detailed pics.
This is a unique shaped vintage 8 lb splitting maul axe head that is free of wood and in great condition and marked 8 lbs only It is 9 5/8" end to end and 3 7/8" across the axe bits and the head weighs 8 lbs 6.8 ozs marked 8 Please refer to close up detailed pics.
This is a Collins USA 8 lb splitting maul axe head that is free of wood and in great condition with good markings It is 8 7/8" end to end and 3 3/4" across the axe bits and the head weighs 7 lbs 13.8 ozs Please refer to close up detailed pics
This is a Collins USA 6 lb splitting maul axe head that is free of wood and in great condition with good markings It is 8 1/4" end to end and 3 3/4" across the axe bits and the head weighs 6 lbs 4.5 ozs Please refer to close up detailed pics
This is a vintage skookum 7 lb splitting maul axe head that is free of wood and in good to great condition with good to great markings It is 8 5/8" end to end and 3 7/8" across the axe bits and the head weighs 7 lbs 3.6 ozs marked 7 Please refer to close up detailed pics