|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: Used Location: Crofton, United States Used full set of Jacobs Rubber-Flex Collets and Chuck. Sizes: J910 1/16" 1/8" J911 1/8" 1/4" J912 1/4" 3/8" J913 3/8" ... more1/2" J914 1/2" 5/8" J915 5/8" 3/4" J916 3/4" 7/8" J917 7/8" 1" J918 1" 1 1/8" J919 1 1/8" 1 1/4" J920 1 1/4" 1 3/8" These came from one of our other locations that has been closed. Let me know if you have any questions. Thanks for Looking.
Buy It Now
$21.35 Shipping Condition: Used Location: Fort Calhoun, United States Jacobs Rubber Flex Spindle Nose Lathe Chuck 91-T0. LO Taper Key Drive Mount Jacobs Rubber-Flex Spindle Nose Lathe Chuck Model No. 91-T0 Capacity(with ... moreproper Collets) 1/16" 1-3/8" Collet Type: Jacobs Series 900 Rubber Flex Handwheel Diameter: 9" Spindle Mount: LO Taper Key Drive Overall Dimensions: 10" x 10" x 6" NOTE: No Collets are included with this Chuck
Buy It Now
$35.00 Shipping Condition: Used Location: Downingtown, United States USED… JACOBS" SPINDLE NOSE COLLET CHUCK Type: Rubber Flex Model: 91-C6 Serial Number: B17821 Condition: Good General Specifications: Collet Chuck ... moreCapacity: 1/16" to 1-3/8" Spindle Nose: D1-6 Camlock Approixmate Weight: 25 Lbs Chuck Is Equipped With: ● One(1) Set of Collets: Range: 5/8" 3/4" 3/4" 7/8" 7/8" 1" 1" 1-1/8" 1-1/8" 1-1/4" 1-1/4" 1-3/8" PRICE: F.O.B. Odessa. Florida…$550.00(Plus any applicable taxes.
Buy It Now
$20.00 Shipping Condition: Used Location: Saline, United States Jacobs Rubber Flex Spindle Nose Collet Chuck L00 Mount 91-T00 (#2) $200.00 Plus shipping
Buy It Now
$22.00 Shipping Condition: Used Location: Deer Park, United States Jacobs Model 50 Collet Chuck 500 Series Collet Set L-00 Spindle Nose. Very nice set Little use Clean No chips in bake lite wheel.
Buy It Now
$29.99 Shipping Condition: Used Location: Lombard, United States Selling one more Chuck and Collett set. With L-1 mount. Comes as pictured, in used condition with dings dents and scratches. Comes with set of collets. ... morePlease see photos for details. Thanks for looking Shipping price to the lower 48 only
Buy It Now
$50.00 Shipping Condition: Used Location: Roseville, United States jacobs spindle nose lathe chuck model 91-a6 (joe).
Buy It Now
Free Shipping Condition: Used Location: Saginaw, United States
Buy It Now
$19.40 Shipping Condition: Used Location: Paramus, United States Good used condition, shows signs of use. one collet is missing. check all pics.
Buy It Now
$15.08 Shipping Condition: Used Location: Nashville, United States Nice Jacobs chuck in good working condition showing some light cosmetic wear.
Buy It Now
$77.02 Shipping Condition: Used Location: Holland, United States Jacobs Model 91-C6 Spindle Nose Lathe Collet Chuck. D1-6 Mount.
Buy It Now
$15.55 Shipping Condition: Used Location: Nashville, United States Nice Jacobs chuck in good working condition showing some cosmetic wear.
Buy It Now
$74.71 Shipping Condition: Used Location: Holyoke, United States JACOBS 91-C6 RUBBER-FLEX LATHE SPINDLE NOSE COLLET CHUCK& 1/16-3/4"COLLETS. GOOD USED CONDITION, QUANTITIES AS SHOWN, FITS D1-6 SPINDLES, SHIPPING ... moreWEIGHT 28 POUNDS.
Buy It Now
$20.00 Shipping Condition: Used Location: Fairfield, United States
Buy It Now
$66.46 Shipping Condition: Used Location: Middlebury, United States Jacobs Model 91-C6 No. B Spindle Nose Lathe Collet Chuck D1-6 Mount W/Collets. Model: No. MPN: Model 91-C6. To get a freight quote we will need to know ... morethe following Need it urgently?. Call us and we will do what we can to get it to you quickly.
Buy It Now
$70.85 Shipping Condition: Used Location: Cedarville, United States Jacobs Rubber Flex Spindle Nose Lathe Chuck 91-T0. LO Taper Key Drive Mount Jacobs Rubber-Flex Spindle Nose Lathe Chuck Model No. 91-T0 Capacity(with ... moreproper Collets) 1/16" 1-3/8" Collet Type: Jacobs Series 900 Rubber Flex Handwheel Diameter: 9" Spindle Mount: LO Taper Key Drive Overall Dimensions: 10" x 10" x 6" NOTE: No Collets are included with this Chuck
Buy It Now
Free Shipping Condition: Used Location: Lenapah, United States Flex Collets Included 8. All products are as is.
Buy It Now
$24.88 Shipping Condition: Used Location: Goshen, United States Jacobs Spindle Nose Lathe Chuck Model 91-T1 Questions? Call Robert at 607-259-5615 Very Good Condition 1 Flex collet 34-B
Buy It Now
Free Shipping Condition: Used Location: Portland, United States Jacobs Spindle Nose Lathe Chuck Model 91-T1 Questions? Call Robert at 607-259-5615 Very Good Condition 1 Flex collet 34-B
Buy It Now
$29.70 Shipping Condition: Used Location: Dawsonville, United States Jacobs Model 50 Collet Chuck w/ Flex Collet Set Fits 1-1/2" - 8 Spindle Nose for 9" South Bend Lathe. This is in excellent condition, even the rubber ... moreon the collets is in excellent condition!
Buy It Now
Free Shipping Condition: Used Location: Covina, United States This is a Jacobs Rubber-Flex Collet Spindle Nose Lathe Chuck w/ L0 Mount. Spindle Taper: Jacobs J900 Series Rubber-Flex Collet. Made in the USA by The ... moreJacobs Mfg Co. Overall Height: 5-1/8".
Buy It Now
Free Shipping Condition: Used Location: Covina, United States This is a Jacobs Rubber-Flex Collet Spindle Nose Lathe Chuck w/ A1-6 Mount. Spindle Taper: Jacobs J900 Series Rubber-Flex Collet. Collet Size Included: ... more1-1/4" to 1-3/8". Made in the USA by The Jacobs Mfg Co.
Buy It Now
$37.30 Shipping Condition: Used Location: Alhambra, United States THIS AUCTION IS FOR JACOBS 500 SERIES COLLET CHUCK WITH COLLETS FROM.100-1.060 SIZE. SPINDLE NOSE 2 1/4-8 THREAD. MISSING.600 TO.700 SIZE. PLEASE EMAIL ... moreOR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$18.40 Shipping Condition: For parts or not working Location: Plainville, United States Jacobs Rubber Flex Spindle Nose Lathe Chuck L0 Spindle Mount L-0. J-series Quantity 1. Good threads, key way, Tightens down nice. Ready for use. No marring. ... moresee pictures.
Buy It Now
Free Shipping Condition: Used Location: Covina, United States This is a Jacobs Rubber-Flex Collet Spindle Nose Lathe Chuck w/ A1-6 Mount. Unit will work fine but needs to be lined up when closing the collet in the ... morespindle. Spindle Taper: Jacobs J900 Series Rubber-Flex Collet.
Buy It Now
$19.95 Shipping Condition: Used Location: Tunkhannock, United States
Buy It Now
$48.00 Shipping Condition: Used Location: Covina, United States Jacobs Rubber-Flex Spindle Nose Lathe Chuck. L-0 mount 4-1/2" 6 tpi. + Collets. 1/8" 1/4" 1/4" 3/8" 1/2" 5/8" 7/8" ... more1" 2 x 1" 1-1/8" 2 x 1-1/8" 1-1/4" 1-1/4" 1-3/8" Lots of assorted sizes of collet plugs/ stops as shown. 2 cases + All extras as shown. Nice smooth working condition as shown All shown in photos is included. FREE PRIORITY SHIPPING Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. I go to the post office at everyday at 1.00pm Monday- Friday. If an item is bought and payed for before then item will be send it the same day. If any later it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store and Facebook Page for more great items and friendly. Reliable customer service. And Great deals. Thank You For Viewing
Buy It Now
$32.02 Shipping Condition: Used Location: Louisville, United States THIS AUCTION IS FOR JACOBS 500 SERIES COLLET CHUCK WITH COLLETS FROM.100-1.060 SIZE. SPINDLE NOSE 2 1/4-8 THREAD. MISSING.600 TO.700 SIZE. PLEASE EMAIL ... moreOR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States | | | | | | | Our part# ALL-49570, Made of precision ground. High grade tool steel, Morse Taper#2(2MT) to Jacobs Taper#2(2JT) Long end(with tang) is 2MT. ... moreShort end is 2JT, Arbor will fit all drill chucks that with a 2JT bore and will fit on any machine tool with a 2MT spindle/li We stock all size arbors in our Ebay store(see link below) 1MT. 2MT, 3MT, 4MT, 5MT, R8, 3/8" 1/2" 5/8" 3/4" 1" NMTB30, NMTB40, NMTB50, We stock the largest supply of chucks and arbors on Ebay! Great deals on drill chucks. Arbors, drill bits and more in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawaii, Alaska,
Buy It Now
Free Shipping Condition: Used Location: Covina, United States This is a Jacobs Rubber-Flex Collet Spindle Nose Lathe Chuck w/ A1-6 Mount. Spindle Taper: Jacobs J900 Series Rubber-Flex Collet. Made in the USA by The ... moreJacobs Mfg Co. Mount: A1-6. Serial #: G6899.
Buy It Now
Condition: Used Location: Van Buren, United States Jacobs No 91-A6 Spindle Nose Lathe Chuck. This item is USED. But in very good condition. This chuck has an American Standard Type L- Long Taper. There ... moreis a copy of the instruction manual included. There are NO collets included. Shipped FREE in the USA. Local pick up is available at no charge. I'm in House Springs, MO(15 minutes SW of St Louis) Combined shipping offered. Please check out my other auctions for more tools!
Buy It Now
$35.00 Shipping Condition: Used Location: Fancy Gap, United States Jacob's 91-T1 Spindle Nose Lathe Flex Collet Chuck and includes two boxes of genuine Jacob's Flex Collet's that go from 1/16" all the way to 1-3/8" and ... morethe rubber plugs. We're talking 38 Lbs. Request total?.
Buy It Now
$98.05 Shipping Condition: Used Location: Covina, United States This is a Jacobs Rubber-Flex Collet Spindle Nose Lathe Chuck w/ 5 Morse Taper Mount. Spindle Taper: Jacobs J900 Series Rubber-Flex Collet. Made in the ... moreUSA by The Jacobs Mfg Co. Mount: 5 Morse Taper.
Buy It Now
$77.50 Shipping Condition: Used Location: Rochester, United States Jacobs Spindle Nose Lathe Chuck #91F1 21/8-8tpi W/collets Southbend. Condition is "Used". Shipped with USPS Parcel Select Ground.
Buy It Now
$86.33 Shipping Condition: Used Location: Holland, United States This is a USED Jacob Lathe Spindle Nose Lathe Chuck that uses their rubber flex collets, the nose just spins off and the collets just pop in! Lastly, ... more3 double end backup plugs are also included for holding shorter parts in those rubber flex collet.
Buy It Now
$26.00 Shipping Condition: Used Location: Warrenton, United States Worn as shown.
Buy It Now
Free Shipping Condition: Used Location: Uhrichsville, United States Here is a good old Jacobs No. 36 large drill chuck. This will hold 3/16 thru 3/4". Chuck is stamped. 18 to. 80 CAP (5 to 20mm). This is a plain bearing ... morechuck that works great. It currently has NO ARBOR in it.
Buy It Now
$6.70 Shipping Condition: New Location: Saint Charles, United States SHARS 5/8" HEAVY DUTY BALL BEARING KEY KEYED DRILL CHUCK 3JT MT3 ARBOR SHANK 3MT-THIS UNIT DOES NOT CLOSE DOWN TO ZERO- PLEASE REVIEW CAPACITY BEFORE ... morePURCHASE- 202-5005+202-1326 Product i nclude: One piece of 5/8' Drill Chuck(202-500 5) One pi ece of MT3 Arbor(202-13 26) One piece of Drill Chuck Key Capacity: 1/8-5/8" Taper: 3JT, Shars heavy duty ball bearing drill chuck is specifically engineered for heavy-duty. Tight tolerance production drilling, Drill chuck designed for drilling applications on portable bench. Floor type drill presses, mills, lathes& more Ball bearing construction improves gripping force and drilling accuracy, Hardened ground center jaw to improve absolute straightness alignment and durability, One piece sleeve design eliminate the cracks between driving teeth, Sleeve teeth. Nose piece and keyholes are through hardened, providing outstanding wear resistance Sleeve teeth is form by cold pressing to improve durability, Precision ground taper end to provide tight mounting onto appropriate arbor All Available to Ship NOW! at Fixed Prices Product Code: 202-5092A 1/2" Keyless drill chuck with Morse Taper 3 Integral Shank 13mm.002" Product Code: 202-5091A 1/2" Keyless drill chuck with Morse Taper 2 Integral Shank 13mm.002" Product Code: 202-1264A 5/8" Integrated Precision Ball Bearing Keyless Drill Chuck.002" Product Code: 202-5017A 1/2" Keyless drill chuck w/R8 Integral Shank 13mm.002" Product Code: 202-5090A 1/2" Keyless drill chuck w NMTB40 Integral Shank 16mm.002" Please direct any questions to our eBay Message Box. SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via UPS or USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Shank: 2 MT Taper: JT3 Runout: 0.0002" Made of superior quality alloy steel precision grounded. Morse Taper #2 (2MT) to Jacobs Taper #3(3JT) ... moreLong end is 2MT, short end is 3JT Arbor will fit all drill chucks that with a 3JT bore and will fit on any machine tool with a 2MT spindle Brand ALL-CARB MPN Does Not Apply Warranty 1 year Drill Chuck Type Drill Chuck Mounting Size 3JT UPC Does not apply Custom Bundle No Bundle Description No Modified Item No Modification Description No.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 33JT Mount / Key No. K3 / 23 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve teeth ... moreplus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
$6.70 Shipping Condition: New Location: Saint Charles, United States SHARS 1/32" - 1/2" 6JT Heavy Duty Drill Chuck Jacobs Type JT6 Key Keyed NEW. Taper: 6JT. Shars heavy duty drill chuck is specifically engineered for heavy-duty, ... moretight tolerance production drilling. Drill chuck designed for drilling applications on portable bench, floor type drill presses, mills, lathes & more.
Buy It Now
$6.70 Shipping Condition: New Location: Saint Charles, United States SHARS 1/32" - 3/8" 2JT Heavy Duty Drill Chuck Jacobs Type JT2 Key Keyed NEW. Taper: 2JT. Shars heavy duty drill chuck is specifically engineered for heavy-duty, ... moretight tolerance production drilling. Drill chuck designed for drilling applications on portable bench, floor type drill presses, mills, lathes & more.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 0JT Mount / Key No. K0 / 2 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve teeth ... moreplus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 3JT Mount / Key No. K4 / 44 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve teeth ... moreplus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
$9.70 Shipping Condition: New Location: Saint Charles, United States SHARS 1/32" - 1/2" 33JT Heavy Duty Drill Chuck Jacobs Type JT33 Key Keyed NEW. Taper: 33JT. Shars heavy duty drill chuck is specifically engineered for ... moreheavy-duty, tight tolerance production drilling.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 1/2 - 20 Mount / Key No. K32 / 14 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve ... moreteeth plus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 6JT Mount / Key No. K3 / 24 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve teeth ... moreplus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 3JT Mount /Key No. K3 / 33 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve teeth ... moreplus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 2JT Mount / Key No. K2 / 13 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve teeth ... moreplus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 1JT Mount / Key No. K1 / 5 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve teeth ... moreplus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States .6250 (2) Mount / Key No. K32 / 18 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve ... moreteeth plus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 3JT Mount / Key No. K4 / 45 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve teeth ... moreplus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States • Jaws specially treated to ensure extended thread life and high gripping surface hardness. • Through-hardened sleeve teeth plus hardened nose and keyholes ... moreprovide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 3/8 - 24 Mount / Key No. K1 / 5 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve ... moreteeth plus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 3/8 - 24 Mount / Key No. K7 / 7 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve ... moreteeth plus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 3JT Mount / Key No. K3 / 32 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve teeth ... moreplus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 2JT Mount / Key No. K3 / 23 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve teeth ... moreplus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 1/2 - 20 Mount / Key No. K32 / 17 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve ... moreteeth plus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 3/8 - 24 Mount / Key No. K32 / 17 oz. Jaws specially treated to ensure extended thread life and high gripping surface hardness. Through-hardened sleeve ... moreteeth plus hardened nose and keyholes provide outstanding wear resistance.
Buy It Now
Free Shipping Condition: New Location: Seattle, United States Plain bearing chuck with fluted sleeve. OEM standard for accuracy and durability on all types of stationary industrial power and machine tools. For threaded ... morespindles. Fully hardened and ground working components.
|
|
|
|
JACOBS SPINDLE NOSE (RUBBER FLEX) COLLET CHUCK
USED… JACOBS" SPINDLE NOSE COLLET CHUCK Type: Rubber Flex Model: 91-C6 Serial Number: B17821 Condition: Good General Specifications: Collet Chuck Capacity: 1/16" to 1-3/8" Spindle Nose: D1-6 Camlock Approixmate Weight: 25 Lbs Chuck Is Equipped With: ● One(1) Set of Collets: Range: 5/8" 3/4" 3/4" 7/8" 7/8" 1" 1" 1-1/8" 1-1/8" 1-1/4" 1-1/4" 1-3/8" PRICE: F.O.B. Odessa. Florida…$550.00(Plus any applicable taxes.
|
|
|
Lathe chuck - Jacobs Spindle Nose collet chuck Size D1-4 - No Reserve
This is a Jacobs Spindle Nose collet chuck. The large spindle allows for very quick and accurate collet change. The flexible rubber collets work great for centering up work. This chuck is in great condition. The collets have no sign of wear. The collets are in the original Jacobs metal storage boxes. The spindle does not have any major scratches. This is a D1-4 cam lock chuck. There is no reserve on this auction. Good luck bidding!
|
|
|
Jacobs Spindle Nose Lathe Chuck with 2 Boxes of Rubber-Flex Collets D1-6
Used full set of Jacobs Rubber-Flex Collets and Chuck. D1-6 adapter size. Collet Sizes: J910 1/16" 1/8" J911 1/8" 1/4" J912 1/4" 3/8" J913 3/8" 1/2" J914 1/2" 5/8" J915 5/8" 3/4" J916 3/4" 7/8" J917 7/8" 1" J918 1" 1 1/8" J919 1 1/8" 1 1/4" J920 1 1/4" 1 3/8" These came from one of our other locations that has been closed. Let me know if you have any questions. Thanks for Looking.
|
|
|
Jacobs Spindle Nose Lathe Rubber Flex Collet Chuck 91-C6 Camlock Mount D1-6
Jacobs Spindle Nose Lathe Collet Chuc k Body: Type D-1 Camlock Mount: D1-6 Diameter of Mounting Pins: 7/8" Chuck Model: 91-C6 This listing is for the Jacobs Spindle Nose Lathe Collet Chuck Model 91. And the two(2) boxes of Rubber Flex Collet Sets are included for FREE PAYMENT: Paypal payment is due immediately for“Buy-it-now” listings and within 2 days for auction listings. If payment is not received within the specified time. We reserve the right sell the item to a different buyer. Any bid or purchase made without payment will be noted by eBay. SHIPPING: Shipping Address: According to Ebay/Paypal policies. We are required to ship ONLY to the address in either your Ebay(default shipping address) or Paypal account. The request for shipping to a different address cannot be honored as it disallowed according to Ebay/Paypal policies. International ... moreShipping: Import duties. Taxes, and surcharges are not included in the item price or shipping charges and are the buyer’s responsibility unless it is purchased through the Global Shipping Program. Please check with your country’s customs office to determine what these additional costs will be if you are concerned. ABOUT US: We are not affiliated with the brand names being sold. And brands mentioned are for identification purposes only. TERMS OF SALE: Items for sale are in working condition unless otherwise specified. The item(s) in the photos are the actual item(s) for sale. And it is exactly what you will receive. Only the item(s) shown in the photos are included. Items in the photo(s) will supersede the written description should there is any discrepancy due to inadvertent description error. Please see all photos for details and condition. If an item is used. Please note that it will have the expected wear when purchasing used goods. All measurements are approximates. Items are sold in“as is” condition; and returns are not accepted, unless a serious and gross error was made in the listing. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
JACOBS COLLET SPEED CHUCK WITH COLLETS SPINDLE NOSE LATHE CHUCK
JACOBS SPEED CHUCK NO. 3.LATHE FACE MODEL NO. 91-06,SERIAL NO.18087, WITH 4 COLLETS, 1/4-3/8,3/8-1/2,1-11/8,1 1/8-1 1/4, CALL WITH QUESTIONS 716-474-7447 THANKS GARY
|
|
|
JACOBS No. 91-C4 SPINDLE NOSE COLLET CHUCK rubber flex holder tool D1-4" MOUNT
very good used spindle nose collet chuck& rubber flex collet set jacobs No. 91-C4 D1-4" mount collet range from 1/16" to 1 3/8" please check my other auctions and happy bidding! will ship for $24.70 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Jacobs Spindle Nose Rubber Flex Lathe Chuck Model No. 91-T00 Serial No. 80-27
Jacobs Spindle Nose Rubber-Flex Lathe Chuck Model No. 91-T00 Serial No. 80-27 No collets are included. But feel free to message me if you are looking for some. The chuck has an L00 mount. An L00 mount has a locking thread on its OD that measures 3.745" X 6 tpi http:shopswarf.orconhosting.net.nz/chuckmt.html My measurements of the lump of steel show that the thread on the ID is actually: 3.825" X 5.7 tpi The lump of steel measures 8" OD X 3" thick. Please Note: We have tried to remove the"Lump of Steel" 2 people holding and turning, but we don't have the oompf to remove it nor we do we have a lathe to attach it to and remove it that way. Shipping is free, so you'll need a way to remove the steel or maybe you'll be lucky and the dimensions are correct and it will attach to your lathe. This item does ... morehave a few dings and dents. So please look at the pictures. If you need a specific shot. Please message me. Pictures are of the actual item.
|
|
|
JACOBS SPINDLE NOSE LATHE CHUCK L1 MOUNT WITH 2 SETS OF COLLETS
JACOBS SPINDLE NOSE LATHE CHUCK L1 MOUNT WITH 2 SETS OF COLLETS JACOBS SPINDLE NOSE LATHE CHUCK L1 MOUNT WITH 2 SETS OF COLLETS PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
|
|
|
Jacobs Spindle Nose Lathe Chuck with Flexible Collets Set- Model 91-T1 1/16-5/8"
Used Jacobs Spindle Nose Collet Chuck•In good condition•Serial Number: H 2357•Model: 91-T1•6 Threads per Inch This Jacobs chuck is excess material from a votech school that has closed its machine shop. The Jacobs chuck has a back plate on it to fit a lathe with a keyed. Tapered nose. The outside diameter of the threads are 4 inches. The threads are 6 threads/inch. I believe it came off a clausing lathe. Comes with Rubber Flex Collet set(pictured) Rubber Collet Set: J910-J914; 1/16" 5/8"
|
|
|
Jacobs spindle nose chuck D1-3 mount with flex collets
Jacobs spindle nose chuck. D1-3 mount very good condition with the following flex collets: 1/4-3/8. 3/8-1/2, 1/2-5/8, 5/8-3/4, 1 1/4-1 3/8. Weighs 25 lbs. Pack in 12x12x10 box.
|
|
|
JACOBS SPINDLE NOSE LATHE CHUCK, MODEL 91-TO, L-0 MOUNT - 2 SETS OF COLLETS
This listing is for a USED Jacobs Spindle Nose Lathe Chuck with two sets of Rubber Flex lathe collets. Chuck: Jacobs Spindle Nose Lathe Chuck model 91-T0- For L-0 spindle- Serial No. 4474- Capacity 1/16" to 1 3/8" Handwheel diameter 9" Weight 16 lbs. Collets: Set#1 part numbers J910-J914(5 collets holding from 1/16"5/8" Set#2 part numbers J915-J920(6 collets holding from 5/8"1 3/8" this case stores the collets well. But is cracked. Note- in the pictures the 3/8"1/2" collet is in the chuck rather than in the collet case. Please ask any questions you may have. Notable Terms: Payment is due within one week following purchase. Item will ship within one business day following payment- Ships within the US- No shipment will be made to a P.O Box address
|
|
|
JACOBS SPINDLE NOSE LATHE CHUCK with COLLETS D1- 6 " CAM LOCK
JACOBS SPINDLE NOSE LATHE CHUCK WITH(8) COLLETS. D1- 6" CAM LOCK. MODEL No 91-C6. SERIAL No B 18091. IT IS IN A CUSTOM MADE WOOD STORAGE CARRYING CASE. THE COLLETS ARE- J912W 1/4- 3/8" J913W 3/8- 1/2" J914W 1/2- 5/8" J916W 3/4- 7/8" J917W 7/8- 1" J918W 1" 1-1/8" J919W 1-1/8- 1-1/4" J920W 1-1/4- 1-3/8" THIS SET IS USED BUT IN GOOD CONDITION. IT IS BEING SOLD"AS IS AS SHOWN" PLEASE E-MAIL ANY QUESTIONS BEFORE BIDDING AND THANKS FOR LOOKING. FREE SHIPPING TO LOWER 48 STATES.
|
|
|
JACOBS SPINDLE NOSE LATHE CHUCK MODEL 91-A6 #52453
JACOBS SPINDLE NOSE LATHE CHUCK MODEL#91-A6 SERIAL#G3134 MOUNT: LONG TAPER NOSE 00L LOCK PIN AS SHOWN IN PHOTOS IS MISSING. A NEW ONE CAN BE MADE FROM DOWEL PIN. THE NOSE CAP HAS BEEN BROKEN AND WELDED AS SEEN IN PHOTOS. THIS ITEM IS USED BUT IN GOOD CONDITION OTHER THAN THE DEFECTS NOTED ABOVE. INVENTORY#52453
|
|
|
JACOBS SPINDLE NOSE LATHE CHUCK D1-8 CAMLOCK W/ RUBBER FLEX COLLETS
Jacobs Spindle Nose Lathe Chuck w/ Rubber Flex Collets Jacobs Spindle Nose Lathe Chuck D1-8 Spindle Nose CamLock Mount 2-1/4" Thru Hole Model No. 91-A6 8-7/8" Overall Diameter x 8" Height Overall Includes Set Jacobs Rubber Flex Collets Sizes Range: J915 to J920. See pics Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
Jacobs Spindle Nose Collet Chuck With Collets Metal Lathe Southbend Clausing Etc
Very nice jacobs model 91-C3 spindle nose collet chuck with 1/16 to 1-3/8" collets(11) See pics of actual item you will receive. I do not know the D mounts so please use the pics as a guide and if you need more measurements please give me directions in detail of what you need. If you are close by to Yorktown. Va local pickup is welcomed and I will give you a rack for the collets. If you need the item shipped the rack will not be included due to the expense out weighing the value of the rack. Posted with
|
|
|
Jacobs Rubber Flex Spindle Nose Lathe Chuck 91-C6, D1-6 Camlock; 9 collets
You Are Bidding On A Pre-Owned Jacobs Spindle Nose Lathe Chuck Model No. 91-C6 D1-6 Mount 9" hand wheel. Cap. 1/16- 1 3/8. 3- 3/4" 875 mounting studs 4 5/8" center spacing 7" back plate 9 rubber flex collets are: J916 3/4- 7/8. J920 1-1/4- 1-3/8" J913 3/8- 1/2; J917 7/8-1' J919 1 1/8' 1 1/4' J918 1- 1-1/8' J912W 1/4-3/8; J911W 1/8-1/4; J915 5/8-3/4. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-141ad9e8c49-0xfb-
|
|
|
Jacobs Spindle Nose Lathe Collet Chuck Model 91-A6
For sale is a used Jacobs chuck model 91-a6. This is used and is in good used condition. Does show wear with light rust and tarnish throughout. Thanks for looking.
|
|
|
Jacobs Spindle Nose Lathe Chuck L0 Spindle Mount (Inv.29361)
Jacobs Spindle Nose Lathe Chuck(Inv.29361) Model 91-TO with Rubber Flex collet(Inv.29361) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer ... moreis responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Jacobs Rubber Flex Spindle Nose Lathe Chuck D1-6 Camlock Mount w/ Collets
Jacobs Rubber Flex Spindle Nose Lathe Chuck D1-6 Camlock Mount w/ Collets. NOTE: Will ship Internationally at a different rate.
|
|
|
JACOBS L-00 SPINDLE NOSE RUBBER FLEX LATHE CHUCK L00 MOUNT WITH COLLET SET
JACOBS SPINDLE NOSE LATHE CHUCK. MODEL 91-T00. S/N- E6974. SPINDLE MOOUNT- L-00. WEIGHT 15 LBS. JACOBS RUBBER FLEX COLLET SET SERIES J900. SIZES- 1/16" 1 3/8" WITH THE EXCEPTION OF 1/2- 5/8 COLLET IS MISSING. APPROX SHIPPING DIMENSIONS: 20" L X 10" W X 10" W. WEIGHT 30 LBS.
|
|
|
Jacobs Spindle Nose Lathe Chuck L00 Mount Model No.91-T00
Jacobs Spindle Nose Lathe Chuck Model No.91-T00 Made by The Jacobs Manufacturing Co. in USA L00 mount(3-3/4" X 6 thread) Uses Jacobs Rubber Flex Collets J910- J920 Used but in excellent condition Pictures are of the actual item.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14401d262b4-0xef-
|
|
|
Jacobs 91-T1 Flex-Collet Spindle Nose Lathe Chuck 9" x 9" x 6"
Questions? Call us: 1-877-328-9236. Jacobs 91-T1 Flex-Collet Spindle Nose Lathe Chuck 9" x 9" x 6" Manufacturer: Jacobs Manufacturing Company Model: 91-T1 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Jacobs Manufacturing Company Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: This item was not tested since we do not have the proper resources. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Jacobs 91-T1 Spindle Nose Lathe Chuck, Specifications: Manufacturer: Jacobs Manufacturing Company, Model: 91-T1, Overall Dimensions: 9" x 9" x 6" Top Hole I.D. 1.4" SKU: O06L003 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? ... moreGive us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their dire
|
|
|
JACOBS RUBBER FLEX SPINDLE NOSE CHUCK W/ COLLETS L00 MOUNT
JACOBS SPINDLE NOSE COLLET CHUCK MODEL NO.91-T00. L00 LONG TAPER MOUNT 1/16" 5/8" RANGE COLLETS INCLUDED. Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. Buyer pays actual shipping cost. Thanks for looking!
|
|
|
9" JACOBS SPINDLE NOSE LATHE CHUCK MODEL 91-T1 1/16"- 1-3/8"
9" JACOBS SPINDLE NOSE LATHE CHUCK MODEL 91-T1 1/16" 1-3/8" A GROOVE IS WORN INTO THE HAND WHEEL. STOCK#25010.1
|
|
|
Jacobs Model 91 Spindle Nose Lathe one set ID rubbers
Jacobs Model 91 spindle nose lathe. Collect chuck. Series 91 rubber flex. Collect set. One set rubber ID rubbers. Sign not included
|
|
|
NICE! JACOBS SPINDLE NOSE LATHE CHUCK D1-3 MOUNT W/ SET RUBBER FLEX COLLETS
Nice Jacobs Spindle Nose Lathe Chuck w/ D1-3 Mount& Collets 9" Overall Diameter D1-3 Mount Model No. 91-C3 Includes Set Jacobs Rubber Flex Collets: J910W 1/16" to 1/8" J911W 1/8" to 1/4" J912W 1/4" to 3/8" J913 3/8" to 1/2" J914 1/2" to 5/8" J915 5/8" to 3/4" No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) ... moreWe cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
JACOBS MODEL NO. 91-C6 SPINDLE NOSE LATHE CHUCK D1-6 CAMLOCK MOUNT W/ COLLETS
Jacobs Spindle Nose Lathe Chuck w/ Collets Model No. 91-C6 9-1/4" Overall Diameter D1-6 Camlock Mount Includes Jacobs Rubber Flex Collets: J917 7/8" to 1" J918 1" to 1-1/8" J920 1-1/4" to 1-3/8" No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you ... moremust wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Jacobs Rubberflex Lathe Spindle Nose Collet Chuck L-2 Long Taper Clausing
Nice used jacobs collet chuck. I don't know a lot about these rubber flex collet chucks. But it seems to work as it should. L-2 long taper spindle mount. Taper, key, and threads are in good shape with just a little patina. See my other items for collets and more lathe chucks. I am always happy to combine shipping. Posted with
|
|
|
Jacobs Spindle Nose Rubber Flex Lathe Chuck 21/4 -8 thread mount
Jacobs Spindle Nose Rubber Flex Lathe Chuck. Used in good woking condition Jacobs 21/4-8 thread mount rubber-flex collet chuck.Comes with 4 collets. 1/16-1/8, 1/8-1/4, 5/8-3/4, 3/4-7/8. also included is the manual and a bushing 2 1/4-8 X 1 1/2-8, see pictures. Sold as is No returns. THE EBAY SHIPPING CALCULATOR IS USUALLY WRONG. SO PLEASE PAY BY THE INVOICE I SEND WHEN THE AUCTION ENDS.
|
|
|
JACOBS SPINDLE NOSE DRILL CHUCK 1.2 X 8TPI ATLAS LOGAN SOUTHBEND
JACOBS HEAD STOCK SPINDLE NOSE DRILL CHUCK WITH 1.5X8TPI SCROLLS SMOOTH. JAWS ARE IN GOOD CONDITION, MUST HAVE FOR ANY LATHE WITH A MILLING ATTACHMENT. COMBINED SHIPPING IS ALWAYS WELCOME. PLEASE SEE OUR OTHER ITEMS.
|
|
|
JACOBS SPINDLE NOSE LATHE CHUCK MODEL 91-F1 FLAT BACK W/ SET RUBBER FLEX COLLETS
Jacobs Spindle Nose Lathe Chuck w/ Set of Jacobs Rubber Flex Collets Spindle Nose Chuck Model No. 91-F1 Flat Back Measures 9" Diameter 4" OD Mounting Plate Rubber Flex Collet Set Includes: J916 3/4" to 7/8" J917 7/8" to 1" J918 1" to 1-1/8" J919 1-1/8" to 1-1/4" J920 1-1/4" to 1-3/8" Includes Assorted Plugs Pictured Includes Case No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items ... morepurchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
JACOBS SPINDLE NOSE LATHE CHUCK MODEL No. 91-C6 - NICE CONDITION!
Description YOU ARE BIDDING ON A JACOBS SPINDLE NOSE LATHE CHUCK MODEL No. 91-C6. THIS CHUCK IS IN NICE CONDITION AND THE LOCK COLLAR AND SPINDLE WORK SMOOTHLY. WE COMBINE SHIPPING WHENEVER POSSIBLE Most of our items listed come from local sales. We try to disclose all we know about the item but since we are not the original owner or may not know what the items use is. We may miss some information about it. Please email us if you have any questions and we will do our best to answer your questions. We ONLY SHIP TO ADDRESSES IN THE UNITED STATES. We DO NOT offer local pick up or personal delivery.
|
|
|
JACOBS Spindle Nose lathe Chuck # 91-C6 w/ Camlock Munts Loc: H 2
This is a JACOB'S Spindle Nose lathe Chcuck. Model No. 91-C5. It comes with Camlock Mounts of D1-6 size. It appears to be in pretty good shape. Feel free to contactus if you need more info. Shipping: $25.00 LOC: H2
|
|
|
JACOBS SPINDLE NOSE LATHE CHUCK MODEL C91-C3 W/ D1-3 CAMLOCK MOUNT
Jacobs Spindle Nose Lathe Chuck w/ D1-3 Camlock Mount Model No. C91-C3 D1-3 Camlock Mount Accepts Standard Jacobs Rubber Flex Collets NOTE: No Camlocks Included See Our Other Auctions For a Complete Set No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction ... moreend notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
Jacobs 91 C6 Rubberflex Spindle Nose W/Collets
Jacobs rubberflex collet system with collets. J916(3/4- 7/8) collet a little beat up(i have a close up picture) but otherwise in nice shape. Has a D1-6 back and the instruction booklet
|
|
|
JACOBS SPINDLE NOSE LATHE CHUCK (91-C3) & COLLET SET (D1-3 MOUNT)
JACOBS SPINDLE NOSE LATHE CHUCK(91-C3) COLLET SET(D1-3 MOUNT) CONDITION: Used/ See Photos/ Normal Wear and Tear Good Working Condition: COLLETS J912 TO J917 1/4-3/8 3/8-1/2 1/2-5/8 5/8-3/4 3/4-7/8 7/8-1 Owner Markings: NO Will Combine Shipping– Email me and I will provide you an updated invoice. Click Here to Check out my EBay Store Please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times it is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14a6e60f19f-0x115-
|
|
|
JACOBS LATHE SPINDLE NOSE COLLET CHUCK D1-6 MOUNT WITH COLLETS
JACOBS LATHE SPINDLE NOSE COLLET CHUCK D1-6 MOUNT WITH COLLETS. COMPLETE COLLET SET 1/16" 1-1/4" Customer service is very important to our business. We continually strive to improve our services in order to meet our customers’ expectations. Combined shipping is provided whenever possible to help save our customers money for multiple item purchases. If you are concerned you purchased the wrong item? If you would like to know where you package is in transit? If you have an issue with an item you received? BEFORE opening an Ebay case PLEASE contact us directly to resolve any concerns or issues you may have. Our business hours are Monday- Friday 8:00am thru 5:00pm and you can reach us at 256-395-0077.
|
|
|
JACOBS SPINDLE NOSE LATHE CHUCK 91-C3 91C3
JACOBS SPINDLE NOSE LATHE CHUCK 91-C3 Condition: NEW. In box NEW. No box NEW. Old inventory USED. But in good working condition. X USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY ... moreTO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On large items we may request certi
|
|
|
Jacobs Spindle Nose Lathe Chuck Model 91-C3 w/ Complete Rubber Flex Collet Sets
Jacobs Spindle Nose Lathe Chuck and 2 Complete Rubber Flex Collet Sets Model: 91-C3 Serial# A4555 Your purchase will include everything shown in the pictures above and mentioned below Collets included: J910. J911, J912, J913, J914, J915, J916, J917, J918, J919, J920 Sizes: All sizes between 1/16"1 3/8" Plugs included: CP012. CP913, CP914, CP916, CP917, CP919 Also includes: Collet chuck stock stop model C1709(fits all 91 models of spindle nose chuck. 96-F1 collet chuck, and 92 models of lever operated collet chuck) Everything is good condition! Please Feel Free to Contact with Any Questions Payment All payments are to be made through PayPal within 3 business days of end of auction. Potential extension may be permitted with approved request. Please contact us via email. Shipping Items will be shipped from Rochester NY. Shipping rates ... moreare non negotiable. We will ship anywhere in the continental United States. Shipping will be made after receipt of payment. Condition All items are sold"AS IS" Unless specified in listing. Due to the nature of used and surplus equipment no guarantee or warranties are offered unless specified in the description.
|
|
|
MACHINIST TOOL LATHE MILL Jacobs Spindle Nose Chuck
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS ... moreTHAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.BBBB
|
|
|
JACOBS SPINDLE NOSE CHUCK W/ 2 RUBBER FLEX COLLET SETS D1-6 CAMLOCK
JACOBS SPINDLE NOSE COLLET CHUCK D1-6 CAMLOCK MOUNT. 2) RUBBERFLEX COLLET SETS INCLUDED. 1/16" 1-3/8" RANGE Good used condition. As pictured. Payment due within 48 hours of purchase. Check. M/o, and PayPal accepted. Buyer pays actual shipping cost. Thanks for looking!
|
|
|
NICE! JACOBS SPINDLE NOSE SPEED LATHE CHUCK W/ 5MT MOUNT + COLLET
We Have 1.000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us@ 909.919.9600! Make: Jacobs Model# 91-A6 Country of Origin: U.S.A. Condition: GREAT Specifications: Collet Type: Jacobs#J919. Collet Capacity: 1-1/8" to 1-1/4" Mount: 5 Morse Taper. Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on All Transactions Unless Prior Arrangements are Agreed Upon ... moreBefore The End Of The Auction. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
 |