|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Pooler, United States Built-in pre flow function, can isolate the air, arc smoothly, weld more beautiful. TIG Torch & Plasma Torch. Locate the Ground Clamp with Cable to the ... morePositive Connector (+) on the Welder. Locate the Ground Clamp with Cable to the Positive Connector (-) on the Welder.
Buy It Now
Free Shipping Condition: New Location: Pooler, United States Built-in pre flow function, can isolate the air, arc smoothly, weld more beautiful. TIG Torch & Plasma Torch. Locate the Ground Clamp with Cable to the ... morePositive Connector (+) on the Welder. Locate the Ground Clamp with Cable to the Positive Connector (-) on the Welder.
Buy It Now
Free Shipping Condition: New Location: China Product information.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Gasless Flux Core Wire MIG Weld and Gas MIG Weld, MMA Stick weld, argon gas TIG weld, and plasma air cutter. 220V Multiprocess Plasma cutter - MIG TIG ... more& MMA Welding and Flux Welding Without Gas LED Screen 5 in 1 CUT TIG MIG Welding Machine.
Buy It Now
Free Shipping Condition: New Location: Pooler, United States Built-in pre flow function, can isolate the air, arc smoothly, weld more beautiful. TIG Torch & Plasma Torch. Locate the Ground Clamp with Cable to the ... morePositive Connector (+) on the Welder. Locate the Ground Clamp with Cable to the Positive Connector (-) on the Welder.
Buy It Now
$8.00 Shipping Condition: New Location: Ontario, United States This CT520DF is a first to market multi-process welder that allows the user to TIG/STICK/MMA and plasma cut all from one portable machine. Our 3-in-1 ... moreCT520DF plasma cutter can cut smoothly, saves energy, and makes no ambient noise.
Buy It Now
Condition: Used Location: Van Nuys, United States You are purchasingt his previously owned and used Miller Spectrum 2050 Plasma Cutter that is in good physical condition with minor scuffs and scratches ... morefrom normal use. We have not fully tested this plasma cutter/welder.
Buy It Now
Free Shipping Condition: New Location: United States It applies to MMA, MIG, and Lift TIG. And it can support gasless welding and gas welding. Even if there isn't a gas cylinder outdoors, you can easily ... morecomplete the welding work. It is large enough to handle more coils of wire.
Buy It Now
Free Shipping Condition: New Location: United States With pulse, it can weld beautiful texture. The clear operation panel and intuitive data display are convenient for users to operate and greatly improve ... morethe user experience. IGBT technology makes the body light and easy to carry.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States 【SAFETY & DURABLE】 ARCCAPTAIN welder machine have passed a variety of professional tests and certifications including TÜV and ANSI standards before leaving ... moreour factory. It's also tiny and light enough to move with strap in any workplace(strap included).
Buy It Now
Free Shipping Condition: New Location: Baldwin Park, United States · TIG Torch: 60% at 200A & 100% at 126A. · STICK Arc: 60% at 200A & 100% at 126A. · Duty Cycle: Plasma Cutter: 60% at 50A & 100% at 32A. CTS-200B is a ... morenew type of multifunctional machine with stylish and generous appearance and superb production technology.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Current：CUT 40A，TIG 180A，MMA 160A. MMA Welding: Does not require any gas, requires welding rod. The easiest way to solder is to use a non-technical and ... moreDIY soldering, depending on the welding effect.
Buy It Now
Free Shipping Condition: New Location: China Product information.
Buy It Now
Free Shipping Condition: New Location: Goleta, United States Simadre 110V/220V SIMCT-5200DX. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. 50 Amp Plasma Cutter / 200 Amp ... moreTIG/ARC/MMA Welder. • TIG Torch with initial consumables.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR 250A Mig Welder Machine 3in1 MIG TIG MMA 110/220V Portable Inverter Welder. VEVOR Plasma Cutter Tig Welder CT312 TIG MMA Non-Touch ... morePilot Arc Torch 110/220V. VEVOR Mig Welder Welding Machine 270A MIG MMA TIG 3 In 1 Welder Combo 110V/220V.
Buy It Now
$8.00 Shipping Condition: New Location: Ontario, United States This CT520DF is a first to market multi-process welder that allows the user to TIG/STICK/MMA and plasma cut all from one portable machine. Our 3-in-1 ... moreCT520DF plasma cutter can cut smoothly, saves energy, and makes no ambient noise.
Buy It Now
Free Shipping Condition: New Location: Chino, United States CT520D Inverter Welder 50A/200A TIG ARC/MMA Plasma Cutter 110V. 【3 IN 1 WELDER】 - 3 in 1 200 A DC TIG, MMA welding machine and 50 A air plasma cutter. ... moreDuring MMA welding or TIG welding, this welding and cutting device is characterized by the stability of its performance.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States The AMP® FOURFRONT® 9250 is the globally patented generator/compressor/welder. The first combination machine to include a plasma cutter. What’s Included ... more(1) Welder/generator/compressor/plasma cutter with Kohler® COMMAND PRO 14 HP engine (1) 10 ft. ground cable/clamp (1) 10 ft. electrode cable/holder (1) PT31 13 ft. Plasma Cutting Torch (1) Plasma Cutting Ground (1) Waterproof protective unit cover (2) axles (4) Mud wheels One Machine, MANY Benefits One of a Kind The quadruple threat generator/compressor/ welder/plasma cutter is the first combo machine to include a plasma cutter-built in.
Buy It Now
$77.30 Shipping Condition: Used Location: Kennesaw, United States TheWeld Max LC-416D is designed for Tig/Stick welding low carbon steel, alloy steel, and stainless steel up to 5/16" welding thickness and is also a highly ... moreefficient plasma cutter up to 1/2" cutting thickness.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States With pulse, it can weld beautiful texture. The clear operation panel and intuitive data display are convenient for users to operate and greatly improve ... morethe user experience. IGBT technology makes the body light and easy to carry.
Buy It Now
Free Shipping Condition: New Location: Sunnyvale, United States The Lotos Technology LTPDC2000D is a multi-functional welder that allows the user to perform a variety of functions such as LTPDC2000D combines three ... morefunctions into one with a 200 Amp DC TIG welder.
Buy It Now
Free Shipping Condition: New Location: Monroe, United States The Tomahawk® 30 Air plasma cutting system arrives ready to go for fast and precise cutting. With the Tomahawk 30 Air, forget the grinder – simply pick ... moreup the torch and cut in seconds. Plus, it also has external air capabilities, so you can use it with an external compressor if you need to.
Buy It Now
$300.00 Shipping Condition: New Location: Carthage, United States The AMP® FOURFRONT® 9250 is the globally patented generator/compressor/welder. The first combination machine to include a plasma cutter. Thequadruple ... morethreat generator/compressor/ welder/plasma cutter is the first combo machine to include a plasma cutter-built in.
Buy It Now
$6.99 Shipping Condition: New Location: Clayton, United States 24 VOLT DC BRASS SOLENOID VALVE FOR AIR OR GAS. FOR PLASMA CUTTERS AND WELDERS. 1/8" PIPE INLET AND OUTLET.
Buy It Now
$9.95 Shipping Condition: New Location: Sandy, United States Current adjustable knob up to 200A/160A.
Buy It Now
Free Shipping Condition: New Location: Goleta, United States SIMADRE® POWER 3IN1 520DP 50A PILOT ARC CUTTER AND 200A TIG/MMA/ARC WELDER. • 200 Amp Arc/MMA Welder. With reasonable care, your welder will provide you ... morewith many years of trouble-free service. • Arc/MMA Welder has a 3/16" weld thickness.
Buy It Now
Free Shipping Condition: New Location: Santa Fe Springs, United States About KOOBEN.
Free Shipping Condition: New Location: Goleta, United States Simadre 110V/220V 5200DX 3IN1. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. • Argon Regulator and Tank for TIG ... morewelding. 50 Amp Plasma Cutter / 200 Amp TIG/ARC/MMA Welder.
Buy It Now
Free Shipping Condition: New Location: Goleta, United States SIMADRE® POWER 520DP 3IN1 50A PILOT ARC CUTTER AND 200A TIG/MMA/ARC WELDER. WITH HIGH-PERFORMANCE PILOT ARC CUTTING TORCH and AIR and ARGON REGULATORS! ... more• 200 Amp Arc/MMA Welder. With reasonable care, your welder will provide you with many years of trouble-free service.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States With pulse, it can weld beautiful texture. The clear operation panel and intuitive data display are convenient for users to operate and greatly improve ... morethe user experience. IGBT technology makes the body light and easy to carry.
Buy It Now
Free Shipping Condition: Used Location: Decatur, United States This multi-functional inverter welder is the perfect tool for any welding or cutting job. With a duty cycle of 60% at 50A and 100% at 40A, it efficiently ... morecuts up to 0.4 inches or 10mm thick materials. The VEVOR CT520D model is designed with clean, dry, and oil-free argon gas to ensure protection from dust and debris, and has an IP21S protection degree.The product dimensions are 8 x 16.9 x 12.4 inches, making it compact and easy to store, while still providing maximum efficiency with 85% output. This plasma cutter is ideal for those in business and industrial settings, as well as CNC, metalworking, and manufacturing industries. Get the job done right with this versatile and reliable tool.UNIT ONLY!!
Buy It Now
Free Shipping Condition: New Location: Arcadia, United States SIMADRE® POWER 3IN1 520DP 50A PILOT ARC CUTTER AND 200A TIG/MMA/ARC WELDER. • 200 Amp Arc/MMA Welder. With reasonable care, your welder will provide you ... morewith many years of trouble-free service. • Arc/MMA Welder has a 3/16" weld thickness.
Buy It Now
Free Shipping Condition: New Location: Santa Fe Springs, United States Plasma Cutter Parts fit Amico Power CTS-200 50 Amp Plasma Cutter 3-in-1 Welder.
Buy It Now
Free Shipping Condition: New Location: Santa Fe Springs, United States About KOOBEN.
Buy It Now
Free Shipping Condition: New Location: Plain City, United States TM CT520D TIG/MMA WELDER. 50A Plasma Cutting, 200A Tig / MMA Welding. WITH PLASMA CUTTER. TIG WELDING. PLASMA CUTTING. Tig Welding Torch with 12 ft hose;. ... moreFoot Pedal (10k Ohms);. Net Weight: 27 Lb (excluding foot pedal);.
Buy It Now
Free Shipping Condition: New Location: Monroe, United States The Tomahawk 45 plasma cutting system is versatile and portable, weighing only 28 lbs. You can easily carry it to any job site and start cutting projects. ... moreWith its 45A capability, you can tackle even the most challenging cutting tasks.
Buy It Now
$49.99 Shipping Condition: New Location: Birmingham, United States NEW 3in1 50A PLASMA CUTTER 200 AMP TIG STICK/ARC WELDER BRAND NEW! FOOT PEDAL READY! DC INVERTER 50A PLASMA CUTTER. 200A TIG, 200A ARC WELDER! 1 YEAR ... moreWARRANTY PARTS& LABOR! Footpedal sold separately. Product Specifications: Model: ATPW522. 50A Plasma Cutter(Air) 200A TIG/ARC(MMA) Welder. Dual Voltage 110/220V 50/60Hz Auto Detection. Maximum Cut: 3/4" Maximum Severance: 1" Includes a Heavy Duty 50A Cutting Torch THIS MACHINE IS FOOTPEDAL READY! We are offering more consumables and more accessories than others! THE FOLLOWING ACCESORIES ARE INCLUDED: 10' TIG TORCH 10' CUTTING TORCH MMA CLAMP& CABLE GROUND CLAMP& CABLE TIG CAP(Short) TIG Cap(Long) ARGON Regulator AIR Regulator 12pcs x Plasma Tip 12pcs x Plasma Electrode 7pcs x Plasma Shield Cup 7pcs x Plasma Swirl Ring 3pcs x TIG Collet 3pcs x TIG Collet Body 3pcs x TIG Nozzle WE QUALITY CHECK EACH MACHINE TO ENSURE YOU WILL RECEIVE THE BEST PRODUCT! BOTTOM LINE- THIS MACHINE IS THE BEST DEAL OUT THERE! LIMITED WARRANTY: We back this item with a 1 year limited warranty from the date of purchase covering parts and labor should the item fail due to a manufactures defect. This warranty is non-transferable. Buyer is responsible for all shipping and handling charges both ways should a warranty claim arise. We warrant only what is expressly stated in this listing. It is the sole responsibility of the purchaser to determine if this product will work for his or her particular purpose. We ship UPS Ground To Canada Brokerage/Duty NOT Included These Units retail for around: $1.495.00! Our items are brand new in the retail box. Not refurbished as others may sell! Buy from us and save a TON! If you are the winning bidder please: Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the detailed store policies listed below. After winning an item in auction or completing a Buy It Now purchase, you have two check-out options: Check-Out Now! Click on the Check-Out Now! button at the top of this page or and payme
Buy It Now
Free Shipping Condition: New – Open box Location: Columbia, United States This pack of Thermal Dynamics Plasma Tips is a must-have for any professional welder or metalworker. With five genuine OEM tips included, this pack is ... moredesigned specifically for use with the SL60 and SL100 plasma cutters, and can handle an input amperage of up to 50 amps.Crafted in the United States, these tips are of the highest quality and will help you achieve precise cuts every time. Whether you're working on a small project or a large-scale welding job, these Plasma Tips are sure to meet your needs. Add them to your welding equipment and accessories today.
Buy It Now
$8.00 Shipping Condition: New Location: Bloomington, United States This CT520DF is a first to market multi-process welder that allows the user to TIG/STICK/MMA and plasma cut all from one portable machine. Our 3-in-1 ... moreCT520DF plasma cutter can cut smoothly, saves energy, and makes no ambient noise.
Buy It Now
Free Shipping Condition: Used Location: Grand Prairie, United States With a 12 amp output and built-in air compressor, this plasma cutter is perfect for cutting through a variety of materials.
Buy It Now
Free Shipping Condition: New Location: Lancaster, United States This cutting machine has these characteristics: stabilizing, reliability, lightness, save-energy, no noise, high cutting speed, cutting smoothly and no ... morepolish demands. Don't hesitate to buy it now! 1 x Plasma cutter.
Buy It Now
Free Shipping Condition: Used Location: Topeka, United States MILLER SPECTRUM 125C PLASMA CUTTER! WOW! NICE MILLER PLASMA CUTTER. PRE-OWNED MILLER PLASMA IN VERY GOOD WORKING CONDITION. Miller Exclusives: Blow Back ... moreTorch Design- The plasma arc is created by pulling an electrical arc between an electrode and tip. This process eliminates high frequency by forcing an electrical arc between the two pieces. Pilot Arc Switch- The expanded metal mode allows operator to cut grates. Chain link fence, and other perforated metals without retriggering the gun. Comes Complete With: Built-in piston-driven air compressor, ICE-12C torch with 20 ft(6.1 m) cable, 15 ft work cable with clamp, 10 ft power cord, Extra consumables(2 electrodes. 2 tips) Specs WE TAKE PAYPAL FOR PAYMENTS AND WE ONLY SHIP TO CONFIRMED ADDRESS ONLY. NO PO BOX OR INTERNATIONAL SHIP. PLEASE DON'T ASK! ANYONE WITH" 0" OR NEGATIVE FEEDBACK RATING" PLEASE DO NOT BID AT ALL" WE DO NOT SHIPP TO ALASKA.HAWAII OR PUERTO RICO.THANK YOU.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States 200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current. Multi-functions ... moreWelding & Cutting Machine with 2T/4T Cutting,2T/4T Tig, Pluse Tig and Arc function.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States · TIG Torch: 60% at 200A & 100% at 126A. · STICK Arc: 60% at 200A & 100% at 126A. · Duty Cycle: Plasma Cutter: 60% at 50A & 100% at 32A. CTS-200 is a ... morenew type of multifunctional machine with stylish and generous appearance and superb production technology.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Replaces either the Speed OR Heat POT. INCLUDES 1 x POT ONLY - install on. ® MIG Wire Welders.
Buy It Now
Free Shipping Condition: New Location: Fremont, United States This comprehensive plasma cutting consumables kit is designed to enhance your welding experience by ensuring efficient and durable performance. Here are ... morethe details 10 Plasma cutting electrodes. 1 Plasma cutting stands.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States YA-212A, FM-140, MM250SL, MM140SL, MM120SL, MIG220. ® MIG Welders.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States With pulse, it can weld beautiful texture. The clear operation panel and intuitive data display are convenient for users to operate and greatly improve ... morethe user experience. IGBT technology makes the body light and easy to carry.
Buy It Now
$51.47 Shipping Condition: New Location: Dundalk, United States This unit type is in feet, and the item type is a plasma cutter. Condition: NEW. This product is NEW and in the factory box.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States · TIG Torch: 60% at 200A & 100% at 126A. · STICK Arc: 60% at 200A & 100% at 126A. · Duty Cycle: Plasma Cutter: 60% at 50A & 100% at 32A. CTS-200B is a ... morenew type of multifunctional machine with stylish and generous appearance and superb production technology.
Buy It Now
$5.40 Shipping Condition: New Location: Miami Beach, United States This is a high-quality retaining cup from Miller, designed for use with XT30 and XT40 plasma torches. It is made to be durable and reliable, ensuring ... morethat your welding and soldering work is always up to standard. With a quantity of 1, this retaining cup is a great addition to your welding equipment and accessories. The Miller retaining cup is ideal for use in welding and soldering applications, and is compatible with a range of plasma cutters. It is made from high-quality materials, ensuring that it is long-lasting and reliable. Whether you are a professional welder or just starting out, this retaining cup is a great choice for your welding and soldering needs.
Buy It Now
$4.99 Shipping Condition: New Location: Elk Grove Village, United States The electrode is letter C in the 2nd photo.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 【3 IN 1 WELDER】 - 3 in 1 200 A DC TIG, MMA welding machine and 50 A air plasma cutter. During MMA welding or TIG welding, this welding and cutting device ... moreis characterized by the stability of its performance.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States CT418 Consumables & Accessories. PULSE TIG Welder. Upgrade PULSE TIG Welder. Stick Welder. Application: Plasma Cutter TIG Welder Stick Welder. Pulse TIG ... morewelding has fast cooling at high temperature and can weld heat-sensitive materials, effectively reducing cracks caused by high temperature during welding.
Buy It Now
$40.00 Shipping Condition: New Location: Daly City, United States 310 579 2075 Search Enter your search keyword Catalog BONUS ITEMS! POWERARC 140ST POWERARC 160STH POWERARC 200ST GET SOCIAL! SKU: PPRO-256D $999.00 | ... moreBuy Now! Additional Images: Product Description The new Digitally controlled PowerProd 256D is the latest multi-process unit from Everlast designed to meet the needs of advanced users who want more precision and control of multiple functions for light commercial duties such as portable repair and general maintenance. The unit is designed with AC/DC Pulse TIG. Stick and Plasma functions so that you'll always have what you need to make the weld. It is an ideal unit for portable stick welding repairs with the VRD function which lowers the OCV to help prevent shock and electrocution where required. For TIG, advanced pulse and wave form control help maintain excellent control while making critical aluminum welds. Related Videos Features& Benefits: Digital Microprocessor Control, Click Image to view enlarg Product Notes: Coming 2014 Returns For returns. Contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately. DOA items: In the event you receive a non working unit. We will exchange it free of charge. Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts. Damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost. Shipping Information: 1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines. 2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products. On rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon
Buy It Now
Free Shipping Condition: New Location: Baldwin Park, United States · TIG Torch: 60% at 200A & 100% at 126A. · STICK Arc: 60% at 200A & 100% at 126A. · Duty Cycle: Plasma Cutter: 60% at 50A & 100% at 32A. CTS-200B is a ... morenew type of multifunctional machine with stylish and generous appearance and superb production technology.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States 5 x 256026 - 60A Electrodes. 5 x 262643 - 40A Nozzles. 5 x 249929 Nozzles + 256026 Electrodes - Best Value! ® XT60, XT60M Torches used on Spectrum. Includes ... more10pc Set Experts in Plasma Cutting and Welding for over 10 Years.
Buy It Now
Free Shipping Condition: New Location: Carmel, United States It is easy to use and provides clean, precise cuts. Invest in this ESAB HandyPlasma™ Plasma Cutter for all your cutting needs.
Buy It Now
Free Shipping Condition: New Location: United States It applies to MMA, MIG, and Lift TIG. And it can support gasless welding and gas welding. Even if there isn't a gas cylinder outdoors, you can easily ... morecomplete the welding work. It is large enough to handle more coils of wire.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States With pulse, it can weld beautiful texture. The clear operation panel and intuitive data display are convenient for users to operate and greatly improve ... morethe user experience. IGBT technology makes the body light and easy to carry.
|
|
|
|
USED PLASMARC PCM-70 L-TEC PLASMA WELDER/CUTTER POWER SUPPLY WITH VARIOUS TIPS
USED PLASMARC PCM-70 L-TEC PLASMA WELDER/CUTTER POWER SUPPLY WITH VARIOUS TIPS This item was removed in operating condition from local manufacturer. We cannot test this item so it is being sold"AS IS WITH NO WARRANTY" We buy and sell pre-owned surplus products and company inventory reductions. We are not representatives or authorized distributors. Nor are we affiliated with any manufacturer. Brand or product listed. Designated trademarks, brand names and brands appearing in our ads. Are the property of their respective owners. Purchaser(s) Their agents, assignees or affiliates assume all responsibility& liability for use. Miss-use or application(s) of the item(s) purchased from this seller. SHIPPING Shipping must be paid in advance. No shipping on week-ends or Holidays, no shipping on Customer Accounts. Ship internationally ... moreUSPS Only. The full value of purchase will be declared on Customs Forms All value fees and taxes are the sole responsibility of the buyer. Please consider these terms carefully before bidding on. Or purchasing this item. Refer to your order details page for your tracking number to track your package. If you would like a copy of your invoice or a packaging slip. Then please specify this with your payment at check out. FREIGHT Any freight items is left up to buyer to set up a freight company and pay all shipping charges. We offer to build crating for any item for a fee. Depending on size of item. We do not have a loading dock for trucks but are able to load trucks with fork lifts. Please contact us if you have any questions. We appreciate you and your business. If you have any questions or concerns about your purchase. Let us know BEFORE leaving feedback. We try to provide honest, detailed and accurate descriptions of all items. We strive for 100% customer satisfaction. We try to keep the shipping cost as low as possible& provide an efficient and reliable service. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e0ce5ffb0-0xfd-
|
|
|
CHICAGO ELECTRIC PLASMA ELECTRODES (5 pieces) for welder BRAND NEW - Made in USA
Plasma Electrodes 5 pieces(Retail price $24.99) Constructed from copper- chrome plated and polished exterior finish Overall dimensions: 0.269" OD x 0.867" L. 0.212" ID, Shipping Weight: 0.10 lb. MAUFACTURER'S WARRANTY: 100% Satisfaction Guarantee! If for ANY reason you are not satisfied with this item. You may return it within 90 days TO MANUFACTURER NOT TO ME. BRAND NEW MADE IN USA NO REFUNDS $11.99 Shipping&Handling to Continental U.S. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MILLER SPECTRUM 300 CutMate Plasma Cutter WELDER
YOU ARE BUYING A MILLER SPECTRUM 300 Cut Mate Plasma Cutter. USED GOOD CONDITION FULLY WORKING. MADE IN THE USA FAST FREE SHIPPING!
|
|
|
ESAB Handy Plasma 550 Plasmarc Cutter Welder 208/230 Volt PT-31XL Torch Leads
Ready to Go! ESAB HANDY PLASMA 550 Plasmarc Plasma Cutter manually cuts 1/2 inch and severs 5/8 inch- powerful cutting performance. Includes everything you need: console. 25 ft. PT-31XL torch, air filter/regulator, input power cord with plug, 25 ft. work cable with clamp. RETAIL PRICE: $2.500.00 Features: Economical price- tremendous cutting value for the money Compact portable design- goes to the job. Easily moved about Adjustable output- tailor the current to the material being cut Compact simple torch- easy access. Little maitenance Patented XT nozzles- extended shape gives good visibility Drag or standoff cutting- easy operation with little or no training Template following feature- easily duplicates curves or straight lines Tolerates poor power lines Specifications: Output 35 amps@ 40% duty cycle Input 208/230 vac 1ph. 50/60 Hz. 29/27 ... moreamps Power factor 81% Dimensions 6in.156mm)w x 12in.322mm)h x 14in.362mm) Weight 35 lbs.16kg) We will email you within 24 hours of the end of auction with payment info& combined shipping rate based on actual weight. If applicable. We generally ship within 1 business day of receiving your payment. We provide Insurance. Tracking and Delivery Confirmation on all packages at no additional cost. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. If you are bidding and have a problem with your PayPal account or you don't have a PayPal account. Please contact us about other forms of payment. Payment must be made within 7 days of auction end. Free local pickup is welcomed as well. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e7823c569-0x107-
|
|
|
REFURBISHED RED 3in1 IGBT 50A Pilot Arc Plasma Cutter 200A Tig,Stick Welder
REFURBISHED- GREAT QUALITY! 3-IN-1 IGBT 50A PLASMA CUTTER WITH TIG/STICK WELDER! 110/220V FREE SHIPPING AND 3 MONTHS WARRANTY INCLUDED! GENERAL OVERVIEW Make: LOTOS Year: 2012 Model: LTPDC2000D- The cover of the machine is RED. Type: 3-in-1 IGBT Pilot Arc 50A Plasma Cutter 200A TIG Welder. 200A STICK Welder Condition: Manufacture Refurbished and tested in 110 AND 220vac and works great. For Most of these machines. Damaged circuit board are either repaired or replaced. Function and duty cycle are fully tested by engineer before shipping out) For the outside case. There might be some scratches or dents. But it won't affect machine performance at all. If you are purchasing this product as a Gift, we recommend you to buy a Brand New Lotos machine. The Packing box may NOT be the original box. Status: IN STOCK(Ships in 2 Business Days) Features: ... more50A plasma cutter. Dual Voltage(110/220) DUAL Frequency( 50Hz/60Hz) Robust Infineon(By Siemens) IGBT Power Drive Matrix with PILOT ARC Plasma Cutter• Refurbished yet double function tested and performance tuned prior to shipping• PAPST cooling system from Germany• 3 MONTHS Warranty on Parts and Labor from Lotos California or other Authorized Lotos Dealers/Repair Centers. Input Voltage: 200~250 VAC• Input Power Frequency: 50 hz/ 60 hz(Better performance under 60 hz) Insulation Grade: B• Housing Protection Grade: IP21• Size: 15.5' L x 8' W x 12' H• Weight: 60 lbs(64 lbs with box and footpedal) CE. CCC, CSA and ISO-9001 certification• Power factor: 0.93• Power efficiency: 85% If you would like to purchase extra warranty please refer to: LOTOS Extended 3 year WARRANTY Accessories: Larger 60A Heavy Duty. with Pilot Arc function and simple guide(not shown on the picture) you can disconnect one cable to disable pilot arc function for this torch, all CNC users must use Pilot Arc function) Torch(with long and short caps) Air Filter/Regulator with accessories and brackets• Air Hose• Stick(ARC) Holder• Ground Clamp& Cable• User
|
|
|
RAMSOND CT520DY 3-IN-1 PLASMA CUTTER TIG ARC MMA WELDER
RAMSOND CT520DY 50 AMP PLASMA CUTTER + 200 AMP TIG + 200 AMP ARC MMA WELDER Make: Ramsond Year: 2009 Model: CT520DY Type: 3-in-1 Multifunction Digital Inverter Plasma Cutter + TIG Welder + ARC(MMA) Welder Condition: BRAND NEW(In Sealed Factory Box) Status: IN STOCK(Ships within 2 business days) Features: 50 Amp Digital Inverter Air Plasma Cutter 200 Amp Digital Inverter DC TIG Welder 200 Amp Digital Inverter DC ARC(MMA) Welder Automatic Dual Voltage/ Dual Frequency(110/220V 50/60Hz) Integrated Digital Display(NEW FEATURE) Integrated Pressure Gauge(NEW FEATURE) Foot Pedal Ready* NEW FEATURE) TOSHIBA Transistors(MOSFET) PAPST Advanced German Cooling System Max Severance Thickness: 1" Max Cut Thickness: 3/4" Accessories: Plasma Torch, Plasma Consumables, Air Filter/Regulator, TIG Torch, TIG Consumables, Argon Flow Meter ARC Welding ... moreElectrode Clamp Ground Clamp, Connections. Etc. Warranty: 1 Year(Parts and Labor) The foot pedal is not included as part of standard accessories and must be purchased separately. ABOUT RAMSOND Ramsond is an American company. Headquartered in Detroit, Michigan. In the last few years, Ramsond has quickly become a recognized, reliable and reputable source for a variety of industrial and consumer based products. Ramsond’s expanding product portfolio now includes both industrial and consumer based power generation(thermal, combustion and renewable energy) appliances(refrigeration and air conditioning) water treatment systems, and industrial and construction tools and machinery. Ramsond’s rapid growth of its product portfolio and its continued success are undoubtedly the result of its uncompromising focus on quality and after-sale service. NEW RAMSOND CT520DY DIGITAL INVERTER TECHNOLOGY(TRI-FUNCTION) The Power Technologies Division of Ramsond Corporation has introduced the CT520DY; its newly redesigned digital inverter multi-function series plasma cutter and welder. It is an exciting new innovation that combines a DUAL VOLTAGE/ DUAL FREQUENCY(110V/220 50/60Hz) 50 Amp
|
|
|
HYPERTHERM POWERMAX 380 PLASMA CUTTER WELDER SHOP HOT ROD CAMARO MUSCLE CAR SHOP
Portable machine with recommended 1/4" capacity. Operates on 115 or 230 volt current. Output- 27 amps. Weight- 55 lbs. Standard Equipment: Power Supply PAC110T Torch 20' 6.1 m) Spare Consumables and Air Fitting Work Cable and Clamp 15' 4.6 m) Barely used!
|
|
|
POWER TRANSFER CONTACTOR PLASMA CUTTER WELDER MOTOR MILLER LINCOLN HOBART ESAP
POWER TRANSFER CONTACTOR FOR PLASMA CUTTER WELDER OR MOTOR PLEASE SEE PICTURE FOR SPEC'S 24 VOLT AC INPUT WILL WORK FOR AC OR DC POWER TRANSFER I STAND BEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN To learn more about this and other items I have for sale on ebay go to www.georgesplasmacuttershop.com Thank you
|
|
|
Linde Plasmarc PCM-121 Plasma Welder Cutter PN 678598 SN A84A47807
Linde Plasmarc PCM-121 Plasma Cutter Welder P/N 678598 S/N A84A-47807 Input V. 208-230 460 60 Hz 3 phase 90 80 40 Amps output 350 100% Duty Cycle This item being sold"as is" All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes Metric Services with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of Metric Services, be added to the quoted purchase price and invoiced by Metric Services to Purchaser. The failure of Metric Services to ... moreinvoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by Metric Services and Purchaser in writing. Smaller machinery or equipment will be sold with FOB terms with the Purchaser only being responsible for freight charges. A qualified rigger with liability insurance must perform all removal of machinery or equipment when terms are not FOB. No Purchaser will be allowed to load their own machinery or equipment unless proof of insurance is submitted prior and all other factory requirements are met. Loading dock hours are 9:00a.m.2:00p.m. Monday-Friday. Unless specifically stated in writing by Metric Services, all freight carriers must use flat bed truck only. Some skidding and crating of machinery or equipment can be performed by Metric Services for an additional fee. Upon reasonable notice to Metric Services. Purchaser shall have the right to inspect the equipment prior to shipment. Purchaser agrees that its acceptance of the machinery or equipment tendered shall constitute an acknowledgement by Purchaser that such machinery or equipment satisfie
|
|
|
GAS AIR SOLENOID AND PRESSURE SWITCH FOR MIG TIG WELDER AND PLASMA CUTTER
THIS IS FOR A GOOD USED AND TESTED GAS OR AIR SOLENOID AND PRESSURE SWITCH FOR MIG AND TIG WELDERS AND PLASMA CUTTERS I STAND BEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN PLEASE LEAVE POSITIVE 5 STAR FEEDBACK I WORK VERY HARD TO KEEP MY FEEDBACK RATING PLEASE CONTACT ME IF THERE IS A PROBLEM BEFORE LEAVEING FEEDBACK. To learn more about this and other items I have for sale on ebay go to www.georgesplasmacuttershop.com Thank you
|
|
|
PLASMA CUTTER WELDER CART DOLLY w/ M-30 COMPRESSED AIR FILTER REGULATOR WATER
This cart was built by previous owner to hold a plasma cutter. Cables, and to house the included M-30 Compressed Air Filter and 68228 1/4" Air Line filter/regulator with gauge. If you have a plamsa cutter this should be great for you. You may also use it as a welder cart. Comes with wheels and everything that yous ee pictured. 10" X 25" top tray Bottom tray is the same but metal plates were welder on to put a wider unit up to 11" Please view pictures. The wheels are perfect. Will Sell to the Highest Bidder Unit will be professionally packaged and shipped Insured. Our#1 concern is that your happy with your purchase. Happy with our service, and happy with ebay in general. If unit is not as mentioned or if its damaged in transit you can send it back for a full hassle free refund. Please do your research and make sure this ... moreitem fits your needs. Our return policy is great. We strive for your positive feedback and 5 star ratings. We simply want your repeated business. All items are sent Insured to guarantee its safe arrival. Unit will ship on the following 1 day after your payment is recieved. We have items ready to ship by the end of auction. We are an e-commerce business. We sell strictly online. We do not offer local pickups. We don't have the proper place of business or the proper insurance requirements to greet our customers. We are registered with paypal and feel its the fastest and safest way to complete the transaction. We've moved over our online sales from amazon.com. We look forward to serving your tool and equipment needs. Any questions please send us a message through ebay or to our email. We respond emails and ebay messages promptly. Thank you. Best of wishes, and good luck bidding! We look forward to your business. Please google model number for manufactures specs and owner testimonials:
|
|
|
PLASMA WELDER METAL CUTTER WESTERN WALL ART BUFFALO BISON HOME DECOR
Metal Western wall art featuring buffalo. Made with plasma welder cutter. Well made, with 3 hangers. Colorful pattern, glossy finish, smooth edges. It measures 30 x 8"
|
|
|
Lincoln Welder Plasma Cutter Tomahawk 625 with Machine Torch USED ONLY ONCE!!!
I have a Tomahawk 625 plasma cutter with Machine Torch. I have only cut 1 sheet of 4'x8'x1/4" You will get the 3 Electrodes and 3 Nozzles that I have used since I got the plasma cutter. You will also get 20 NEW Electrodes and 20 NEW Nozzles.worth over $100) If you have any questions feel free to ask. Thanks for looking. Lincoln Welder Plasma Cutter Tomahawk 625 with Machine Torch Posted with
|
|
|
RAMSOND CT520DY 3-IN-1 PLASMA CUTTER TIG ARC WELDER 200A with Pedal Consumables
This is like new and was over $1000 total purchase price. You are getting it for half off! I used this for one project. It worked well. This comes with all factory items. An add on pedal and consumables pack. Thanks for bidding!
|
|
|
Defective LTPDC2000 LOTOS IGBT Pilot Arc 50A Plasma Cutter 200A TIG Stick Welder
Note: California customers will have to pay 8.25% sales tax. Product Summary. Product: Lotos 3in1 IGBT Pilot Arc 50A plasma Cutter/200A TIG/STICK Welder, Condition: Defective, Availability: IN STOCK, Make: Lotos, Model, LTPDC2000. Year, 2013, Warranty: No warranty, Suggested Retail Price: Shipping& Handling: Free Fedex shipping to lower 48 States. General Description. As one of the largest manufacturers of plasma cutting. Tig/stick, arc(MMA) welding equipment in the world, Lotos Technology is proud to offer an extensive selection of industrial plasma cutting and tig/stick welding machine, LTPDC2000. Lotos LTPDC2000 is designed and constructed to withstand extensive use in rugged industrial and construction environments. It is perfect for any home project too. Lotos LTPDC2000 is a THREE-IN-ONE Digital Inverter Plasma Cutter( 50A) Tig Welder( ... more200A) Stick(MMA) welder( 200A) You would have to purchase 3 separate machines to do what this ONE machine can do! Using this portable plasma cutter is cheaper than Oxyacetylene after just a few cuts. Less cleaning. Less maintenance, less noxious gases, less fire hazard, simply less overall work and a better. Cleaner cut. The torch trigger can be moved for a custom fit. It can be used in finger or thumb positions. Torch head is low profile for tight spaces. High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. High Frequency Plasma cuts faster with less distortion in the work piece. It's packed with full features like the separate machines. The Tig welds from this LTPDC2000 are clean and strong. This Tig welder is easier to use than any other Tig welder on the planet! Just flip a switch. Set your amperage and weld.It's that simple. This machine will weld Steel, Stainless Steel, Moly, Ferrous, An ARC welder is a necessity in any industrial shop or home workshop. There are welding jobs that simply require ARC or SMAW(Shielded Metal Arc Welding) Stick welding is cheap and effective. Fill large gaps. Holes, weld cast iron and
|
|
|
Esab PCM-875 Plasma Cutter Welder Torch 460V 3 Phase
Esab PCM-875 Plasma Cutter Welder Torch 460V 3 Phase Up for sale we have an Esab PCM-875 Plasma Cutter in working condition. The model PCM-875 has a cutting capacity of 7/8” and is rated at 60 amps. It comes with a 20 ft 1Torch SL60 torch gun and ground clamp. It operates on 460V. 3 Phase AC power. Another great deal on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer pays for shipping. Increased shipping charges to Hawaii. Alaska, Puerto Rico, and International shipments. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, or payment upon pick up. International buyers must pay by PayPal only. Bank wire transfer is also accepted ... morefor National and International sales over $1000.00. CA buyers add 9.0% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charged for all refunded items. Check out my other great items now!
|
|
|
Thermal Dynamics Pak Master 38XL - Plasma Cutter / Welder System With Torch
Thermal Dynamics Pak Master 38XL- Plasma Cutter/ Welder System With Torch Model: 38Xl In good condition& full working order Includes 1 x Thermal Dynamics Pak Master 38XL- Plasma Cutter/ Welder System With Torch 1 x Extension Cable 3 x Pair Of Safety Glasses in Pouches Description The Thermal Dynamics PakMaster 38XL with proven XL performance in the 3. ⁄8” cutting class just. Got better! The new SureLok PCH-42R Torch. Known. For its superior design and excellent performance, Is now standard equipment on all 38XL systems. The PCH-42R Torch is the newest member in the. SureLok family of torches. SureLok torches feature. Extended tips for maximum visibility. Reach and control. The patented electrode is designed for. Longer life and excellent starting characteristics. Since it locks into position. It doesn’t require tools to install. APPLICATIONS: ... moreAuto Body Repair• Metal Stud Construction. HVAC• Marine Repair. Plumbing. Specifications Cut Capacity: 3/8” 9.5mm) Genuine Cut. reduces to 1/4” 6.4mm) for 20A/ 120V service] Output: 2-29 Amps Continuously Variable(12-20 Amps for 120V/ 20A service) Input: 120/220V(± 10% 1 phase, 50/60Hz. 27/20 amps Duty Cycle: 40% 29A. Dimensions: Height 17” 432mm) includes 31. ⁄2” 89mm) handle] Width 175. ⁄8” 448mm) Depth 93. ⁄4” 248mm) Weight: 44 lb. 20.0 kg) Panel Controls: On/Off. Output Amps, Gas Pressure. Panel Indicators: AC. Gas, DC, Over Temp, Gas Pressure Gauge. Torch: PCH-42R. Work Cable: 10 ft. 3m) with Clamp. Input Power Cable: 10 ft. 3m) with Plug(120V) Gas: Air or Nitrogen. Gas Pressure: 50 psi(3.5 bar) Gas Flow: 190 scfh(90 lpm) Pilot: Electrode to Tip. Control: Torch mounted switch. Torch Configuration: 70°. 90° Head 20 ft. 6.1m. VAT at 20% INCLUDED IN PRICE- VAT INVOICE PROVIDED £550 ex VAT VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union(EU) AND by purchasers in the EU(excluding UK) who are VAT registered Any Questions? Please call 020 8882 1111 from UK or +44 20 8882 1111 from outside the UK LM 87371
|
|
|
Multiplaz 3500 Plasma Welder Cutter Torch With Bag Case & Extra Nozzles Tips VGC
This listing is for a Multiplaz Plasma Welder Cutter Torch With Bag Case& Extra Nozzles Tips and this unit is in very good condition. Looks like it may have been used only a couple of times at the most! One of the button snaps on the handle of the carry bag/case is broken as seen in the last photo. Shipping price includes insurance for Domestic Shipping Only! Payment by PayPal. No International bidders! W ill try to ship within 2-3 business days after receipt of cleared payment. Please pay for item within 7 days of winning auction. Please contact me within 7 days after receipt of item if not completely satisfied.
|
|
|
Miller 625 Spectrum DC Plasma Cutting Cutter System Welder 907058 Millermatic
Paypal. Visa, Mastercard, American Express. In order to promote a great transaction please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. Standard shipping or local pickup is available. Please use the freight shipping calculator to the right to calculate freight shipping which only has the freight carrier's standard insurance. If you require your item to be fully insured for ... morethe freight shipment please email us indicating that so we can total your invoice with shipping and the additional insurance. PA State sales tax applies to all local pickups unless you have a tax exemption form with you at the time of pickup. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Miller 625 Spectrum DC Plasma Cutting Cutter System Welder 907058 Millermatic DESCRIPTION: ~ Up for bid is a good working Miller 625 Spectrum DC plasma cutter# 907058. Everything included in the sale is shown in the photos. gsrx_vers_526(GS 6.6.6(526)
|
|
|
Plasma Air Cutting System Welder Set
Thermal Dynamics Merlin PAK 15XC Plasma Air Cutting System Welder. 150 Amps and uses Oxygen. Air, Argon/Hydrogen or Nitrogen for the plasma gas. System capable of cutting most metals up to 2" Uses PHM/M-150 torch. Seller states that machine has approx. 21 hours use since new. Compete with metal box kit of tips and accessories. Operating Manual included. Selling for less than one-half of new list price($16,669) Call Seller(Efren) at 509-910-5727 with any questions. Machine located in Yakima, WA.
|
|
|
Nice PreOwned Spectrum 125C 115V Plasma Cutter Welder 12A, Stock Number 907149
Nice PreOwned Spectrum 125C 115V Plasma Cutter Welder 12A. Stock Number 907149 Item is in pre owned cosmetic and working condition. Wear from normal use and storage throughout. But overall good cosmetic condition. NOTE: The JCE-12C torch gun delivers approximately three/four seconds of flame when trigger is pushed on. After flame vanishes. You have to release the trigger for a few seconds before you can push again for another release of the flame/torch. The torch gun cable is partially wrapped around with electrical tape for added protection, but does not effect the working condition of the machine. Metal piece between machine and power cable is separated from machine; This does not effect working condition of item. Please See Photos for More Details) Due to the full condition of the item. It is being sold AS IS. Please do not hesitate to ... moreask any questions regarding the item. This is the very first model from the Miller plasma cutter range and ever since it came out on the market. It has received many good praise. The Spectrum 125C series is suitable for light industrial or home use where cut thickness is not a major issue. This cutter is best used for light metal sheet applications, HVAC, plumbing and auto body repair. It uses air plasma cutting technology and offers 12 amp consistent cutting arc for continuous cutting up to 3/16 inch or 41mm in steel. Applications Plumbing HVAC Ductwork Auto Body Hobbyist, Miller Exclusives: Blow Back Torch Design- The plasma arc is created by pulling an electrical arc between an electrode and tip. This process eliminates high frequency by forcing an electrical arc between the two pieces. Pilot Arc Switch- The expanded metal mode allows operator to cut grates. Chain link fence, and other perforated metals without retriggering the gun. 115V. 1 phase. Rated output(DC) 12 amps@ 110V. Amps input@ rated output: 120V-20. Max. open-circuit voltage(DC) 325V. Plasma gas flow/pressure 1.2cfm@50 psi. Cutting Capacity: 1/8" steel. Unit size 13-1/2"H x 8-1/2"W x 16"D. We
|
|
|
Hypertherm Plasma Powermax 1250 Welder
Hypertherm Plasma Powermax 1250 Welder G3 Series Used condition. However is in working condition and was disconnected 1/14 200-600 Volt. 1/3 phase, 50/60 Hz Buyer is responsible for setting up freight shipping and or picking item up.
|
|
|
Thermal Dynamics Drag-Gun 120V Plasma cutter welder
Got this new a few years ago and have only used it a few times. Works good I just don't need it. It comes with the original paperwork. Appearance is fairly nice as well except for a few small spots on the paint on the top. I took a picture of it working to show that yes it works. Here are the specs: PCH 10 70torch and 20' lead. Features: Portable plasma cutting system with built-in air compressor.Maximum convenience and portability.Maximum arc visibility and excellent operator control.Condenser minimizes moisture in the air supply.Cut capacity: 1/8(3.2mm) genuine cut.Duty cycle: 30pct@ 12A.Work cable: 15ft.Input…
|
|
|
CUT 50DX Inverter Air Plasma Cutter Welder Torch CUT50 (D) 110v/ 220v S
Up for Bid is a CUT 50DX Inverter Air Plasma Cutter Welder Torch Model CUT50(D) 110v/ 220v It is in good condition. With just a few marks here and there, average signs of use. It is guaranteed to be in good working order. I only used it maybe 4 times. And then it just sat in storage. Comes with the acessories shown.
|
|
|
160 amp ac dc tig welder 4 in 1 plasma cutter for parts or repair
This machine is to be used for parts or repair. It is missing all knobs and on/off switch. This 160AMP is most likely manufactured by a China factory.
|
|
|
312 Multi Functional TIG/MMA/Air Plasma Cutter Inverter Welder 3in1 OVS-GDJ-160
Great condition
|
|
|
SWEET!! THERMAL-ARC ULTIMA 150 PLASMA ARC WELDER w/ TORCH
Made in U.S.A by Thermal Dyne. This is a used Ultima® 150 Plasma welding system with torch and accesories in GREAT condition. Model# Ultima 150. Serial# E81953A1908011. The Ultima® 150 Plasma welding system has many advantages over traditional automated TIG welding including: increased productivity. Consistent arc starting, improved process control and reduced electrical emission interference. This unique plasma welding system is self contained in a small package with a 150 amp power supply, coolant recirculator and control console. Our design reduces floor space and simplifies installation, making the initial price competitive with automated TIG systems while its increased productivity and repeatable performance allow it to pay for itself in a shorter period of time. Features: Quick Change Torch! No tools required. Cost Savings! ... moreThe Ultima 150 is priced competitively with automated TIG systems. Plasma welding is measurably the lower cost process with savings gained through increased productivity. Reduced scrap, reduced down time and fewer electrode changes. Wide Current Range! 0.5-150 amp current range for quality performance over a wide variety of applications. Very Smooth Arc! Ultra smooth DC arc for repetitive. High quality welds. Repeatable Arc Starting! Pilot arc allows for repeatable arc starts. Reducing defects and rework. Multiple Voltage! 208-460 VAC in 1 or 3 phase power at 50 or 60 Hz with 575 VAC optional module. Simple to Set-Up! The Ultima 150 is a self contained unit. Which requires attaching input power and gases, then mounting the torch. Smart Logic! Prevents damage to the internal components if installed to improper voltage. Current Limiter! Limits power source output to torch capability to avoid torch damage. Preview Set Current! Allows you to display actual current/voltage and avoid costly test set-ups. Easy to Use! Simple interface for automated or manual control, Specifications: Input Frequency: 50/60 Hz. Amperage Range: 0.5-15 Amps(Low) 5-150 Amps(High) Max Open Circuit Voltage:
|
|
|
Accurate Tools TIG/ARC Welder & Plasma Cutter with Accessories ATPW522
Accurate Tools TIG/ARC Welder& Plasma Cutter with Accessories DC Inverter 200A ATPW522 This unit is in excellent condition. Looks great. Please see pics. Guaranteed Electric offers discounted prices on new and used industrial supplies. All of our items come with 24 hour shipping and a 100% satisfaction guarantee. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-148fe6d1cbf-0x109-
|
|
|
Plasma Cutter Torch Welder Hypotherm Max100 Plasma Arc Cutting System 100amp 3ph
Nice hyperthermia plasma arc cutting system 3 phase 100amp portable complete with manual. I have 2 of them your choice cash on pickup or can ship check ok
|
|
|
200 amp tig stick/arc welder 50 Amp Plasma Cutter
Nice working combo unit. 200 amp tig/ arc welder, 50 amp plasma cutter, includes everything but argon tank, any questions call 661-478-5087 mark
|
|
|
2010 THERMAL DYNAMICS PAK 45 208/230/460V INDUSTRIAL Plasma Cutter Welder 3" !!
THERMAL DYNAMICS- PAK 45 208/230/460V Carbon Dioxide Gas Plasma System Welder 400A 3" cutting ability Very heavy duty industrial plasma cutter. Unit comes with heavy duty cart that is shown in pictures. This setup is over $50.000 new. Plasma cutter has low use on it. Purchased in 2011 and used up to 2013. Very heavy duty. Overall dimensions of cart is 9.6 ft long- 4.2 inches wide- 5.3 ft in height. Weight of plasma cutter and cart approx. 2.000-2,200 lbs. Weight of plasma cutter alone is 1,700 lbs. The PAK 45 is a compact. Versatile plasma cutting system designed for high speed cutting of most metals up to 2' thick, with maximum cutting capability to 3' The cutting current is continuously adjustable between 50 and 400 amperes to enable quality hand or machine cutting over a wide range of material thicknesses. TDC 60Hz, 3PH CO2 ... moreGAS REG. Underwater cutting capability- Effectively reduces smoke, fumes, noise and arc glare without part changes in the torch Removable operator control panel- Can be easily removed from the PAK 45 unit and mounted on any cutting machine for complete cutting system operation from one convenient operator station Unique arc starter reduces the possiblity of high frequency interference with eletronic controls Continuously adjustable current control from 50 to 400 amps- The operator can preset and change desired cutting amperage using a front panel dial or remote control Feedback control circuit- Stabilizes cutting current against fluctuations in input voltage, cutting speed, and/or material thickness Automatic pilot arc restarting- Enables cutting of materials such as grating and expanded metals Compact unit- Controls, power supply and coolant recirculator contained in one unit for convenient installation and operation. Dual-Flow 6B torch- Produces fast, high quality cuts with low operating expense. Generic Dimensions: Width: 32' Dimensions: Overall Width- Side to Side: 32 Inches. General Terms& Conditions: Shipping is the responsibility of the buyer…We can assist
|
|
|
Thermal Dynamics Pak 45 PLASMA CUTTER welder -- $50,000 INVESTED
STEAL OF A DEAL. PRICED TO SELL QUICK! Over $50,000 new 2010 THERMAL DYNAMICS- PAK 45 208/230/460V Carbon Dioxide Gas Plasma System Welder 400A 3" cutting ability VERY HEAVY DUTY Industrial plasma cutter. Unit comes with heavy duty cart that is shown in pictures. This setup cost over $50.000 new. Plasma cutter has low use on it. Purchased new in 2011 and used up to 2013. Very heavy duty. Overall dimensions of cart is 9.6 ft long- 4.2 inches wide- 5.3 ft in height. Weight of plasma cutter and cart approx. 2.000-2,200 lbs. Weight of plasma cutter alone is 1,700 lbs. The PAK 45 is a compact. Versatile plasma cutting system designed for high speed cutting of most metals up to 2' thick, with maximum cutting capability to 3' The cutting current is continuously adjustable between 50 and 400 amperes to enable quality hand or machine ... morecutting over a wide range of material thicknesses. TDC 60Hz, 3PH CO2 GAS REG. Underwater cutting capability- Effectively reduces smoke, fumes, noise and arc glare without part changes in the torch Removable operator control panel- Can be easily removed from the PAK 45 unit and mounted on any cutting machine for complete cutting system operation from one convenient operator station Unique arc starter reduces the possiblity of high frequency interference with eletronic controls Continuously adjustable current control from 50 to 400 amps- The operator can preset and change desired cutting amperage using a front panel dial or remote control Feedback control circuit- Stabilizes cutting current against fluctuations in input voltage, cutting speed, and/or material thickness Automatic pilot arc restarting- Enables cutting of materials such as grating and expanded metals Compact unit- Controls, power supply and coolant recirculator contained in one unit for convenient installation and operation. Dual-Flow 6B torch- Produces fast, high quality cuts with low operating expense. Generic Dimensions: Width: 32' Dimensions: Overall Width- Side to Side: 32 Inches. STEAL OF A DEAL,
|
|
|
Thermal Dynamics Pak 45 PLASMA CUTTER welder -- GREAT DEAL
PRICED TO SELL QUICK! 2010 THERMAL DYNAMICS- PAK 45 208/230/460V Carbon Dioxide Gas Plasma System Welder 400A 3" cutting ability VERY HEAVY DUTY. VERY NICE Industrial plasma cutter. Unit comes with heavy duty cart that is shown in pictures. This setup cost $50.000 new. Plasma cutter has low use on it. Purchased new in 2011 and used up to 2013. Very heavy duty. Overall dimensions of cart is 9.6 ft long- 4.2 inches wide- 5.3 ft in height. Weight of plasma cutter and cart approx. 2.000-2,200 lbs. Weight of plasma cutter alone is 1,700 lbs. The PAK 45 is a compact. Versatile plasma cutting system designed for high speed cutting of most metals up to 2' thick, with maximum cutting capability to 3' The cutting current is continuously adjustable between 50 and 400 amperes to enable quality hand or machine cutting over a wide range of ... morematerial thicknesses. TDC 60Hz, 3PH CO2 GAS REG. Underwater cutting capability- Effectively reduces smoke, fumes, noise and arc glare without part changes in the torch Removable operator control panel- Can be easily removed from the PAK 45 unit and mounted on any cutting machine for complete cutting system operation from one convenient operator station Unique arc starter reduces the possiblity of high frequency interference with eletronic controls Continuously adjustable current control from 50 to 400 amps- The operator can preset and change desired cutting amperage using a front panel dial or remote control Feedback control circuit- Stabilizes cutting current against fluctuations in input voltage, cutting speed, and/or material thickness Automatic pilot arc restarting- Enables cutting of materials such as grating and expanded metals Compact unit- Controls, power supply and coolant recirculator contained in one unit for convenient installation and operation. Dual-Flow 6B torch- Produces fast, high quality cuts with low operating expense. Generic Dimensions: Width: 32' Dimensions: Overall Width- Side to Side: 32 Inches. PRICED TO SELL QUICK! General Terms& Cond
|
|
|
Hobart HPW-400 Plasma Arc Welder / Cutter with Coolant Recirculator and Cart
SKU: 2506734 A: 0013000000CXCfg O: 0065000000TRUs7 PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Hobart HPW-400 Plasma Arc Welder/ Cutter with Coolant Recirculator Portable Cart 3PH This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great buying formats to serve you– Bid Now Auctions and Fixed Price Buy Now listings. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles, industrial machine tools, general rental tools and other heavy equipment. View our Fixed Price store- also featuring construction machinery. Fleet vehicles& other industrial equipment in a convenient Buy It Now(or Best Offer) ... moreformat. Bid with confidence- 100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. Containerizing and port-access available for US and International shipping- for estimates click the Request Freight Estimate button above. Overview: Make: Hobart Model: HPW- 400 Type: Plasma Arc Serial No: 79WA26137 Make: Thermal Dynamics Model: HE100A Type: Coolant Recirculator Serial: Y02219A171214 Features/Specifications: Hobart: 220/380/415/440/500V- 16.2/9.4/8.6/8.1/7.1A 50Hz. 3PH Cutting Capacity: 1" Can be set up to use a wide range of voltage Thermal Dynamics 110V. 10A, 60Hz, 1PH Please see photos for more details Includes rolling shop cart Resources: Click here to learn more about this type of item from the manufacturer's website. Dimensions& Weight: Dimensions: L 28" x W 28" x H 60" Shipping Weight: 540 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item inter
|
|
|
Dynapak Air Plasma Cutting System Cutter 4XI 40 AMP 3 Phase Torch Welder Gas WOW
Selling this very nice Thermal Dynamic Air Plasma Cutting System 4XI was working when last used a few years ago. Everything is included as shown in pictures. Manuals readily available here on eBay for about $20. Any questions please let me know. Thanks Joe
|
|
|
Thermadyne Ultima 150 Plasma Welder with Remote & Sequencer Package
Thermadyne Ultima 150 Plasma Welder with Remote& Sequencer Package PWH 2A 90-degTorch with 12.5' Lead and Quick Connect. Expendables Kits 3-2676 Weld Sequencer Package. Includes: 7-3100 WT-1 Weld Timer 7-3102 CS-1 Current Slope(CS-1 is not functioning& not part of pricing) 7-3101 Gas Slope 7-3103 CP-1 Pulser 7-3104 WSE Enclosure 7-3106 RP-1 Remote Pendant with Cables Spare Ultima 150 Unit for Parts or Rebuild
|
|
 |