|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: China ◆ 09 800 PT-80 PT80 IPT80 IPT-80 Plasma Torch Body Head for ESAB Tecmo Air Plasma. ◆ Reference number: 09800. ◆ Its quality is very good, and it can be ... moreperfectly applied to PT series plasma torches, unlike other substitutes.
Buy It Now
Free Shipping Condition: New – Open box Location: Pacific, United States Replaces ESAB PT-27 Torch 21661. ESAB®/L-Tec® PCM-750i/PCM-875/PCM-1000i/PCM-1125.
Buy It Now
Free Shipping Condition: New – Open box Location: Pacific, United States 1 x 21420 Standoff - fits Esab. other parts for Esab. Experts in Plasma Cutting Parts, Service & Repair for over 10 Years. © PT-27 & PT-23 Plasma Systems.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Part #: 33366 Electrodes + 33418 80A Nozzles. 10 x 33366 Electrodes +. 10 x 33418 80A Nozzles +. Fits Esab & L-Tec Linde PT-23 & PT-27 Plasma Torches.
Buy It Now
Free Shipping Condition: New Location: Carmel, United States It is easy to use and provides clean, precise cuts. Invest in this ESAB HandyPlasma™ Plasma Cutter for all your cutting needs.
Buy It Now
$49.99 Shipping Condition: For parts or not working Location: Goffstown, United States 1x - ESAB / Thermal Dynamics Cutmaster 60i Plasma Cutter. ModelCutmaster 60i. TypePlasma Cutter. Gas Pressure6.2-8.6 bar. Gas Flow142-235 l/min. Torch ... moreAir Consumption1 l/min ( 1 cfh ). 110 mm/min. 150 mm/min.
Free Shipping Condition: New Location: Miami, United States The Cutmaster 58 is the most powerful 5/8 in. This unit cuts through mild, stainless, or aluminum up to 1 in. (25 mm) thick. The Cutmaster 58 combines ... morepower with the well-known performance and features of the industry-leading 1Torch.
Buy It Now
Free Shipping Condition: For parts or not working Location: Wolcottville, United States This is a used plasma cutter that does not work, and we do not know whats wrong. Selling "as is" no returns. .
Buy It Now
Free Shipping Condition: New Location: Saylorsburg, United States 6.2 kW rated output, 50% Duty Cycle at 60A, available in 600V and 208-460V with automatic multi-voltage detectionBuilt for portability and durability ... morewith the integral multi-handle designSL60QD 1Torch quick disconnect with ATC (Advanced Torch Connector) allowing selective replacement of either the torch handle assembly or the torch leads, using the patented SureLok technology also available as an RPT Torch5/8 in. (16 mm) recommended cut capacity with greater than 1 in. (25 mm) maximum cut and 1/2 in. (13 mm) pierce ratingIndustry leading 4-year warranty on power supply and 1-year warranty on torch.
Buy It Now
Condition: For parts or not working Location: Glassboro, United States Small orders are no problem. Joseph Fazzio Inc. Joseph Fazzio, Inc. Surplus Division. Be sure to add us to yourfavorites list ! Your Best Work Starts ... moreHere™.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Part #: 33366XL Electrodes + 33369 50A Nozzles. Includes: 10 x 33366XL Electrodes +. 10 x 33369 50A Nozzles +. Fits Esab & L-Tec Linde PT-23 & PT-27 Plasma ... moreTorches.
Buy It Now
Free Shipping Condition: New Location: Tracy, United States Plasma Cutter Gun Consumables Kit Cut Welding Parts Fit PT31 Cutting Torch 40PK. The consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting ... moreTorch, Hese torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D, CT416,CT416D,CT518, CT518D, Super160, Super160P etc.
Buy It Now
Free Shipping Condition: New Location: United States PT-31 Air Plasma Cutting Hand Torch Gun 13.2FT/4M Fit ESAB L-TEC PT-31 LG-40 WSD-LG40 CUT50. Fit ESAB L-TEC PT-31 LG-40 WSD-LG40 CUT50. PT-31 Plasma Cutting ... moreTorch BodyHigh quality Plastic handleSuitable for hand cuttingFit ESAB L-TEC PT-31 LG-40 WSD-LG40 CUT50.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Fits ESAB PT-27 Torch. Fits Esab & L-Tec Linde PT-27 Plasma Torches. Roller Guide Wheel fits PT-27 Torch using 21616 Heat Shield Retaining Cap - NOTE: ... moreyou may have to trim your shield as shields vary slightly -.
Buy It Now
Free Shipping Condition: New Location: China ◆ 10 pieces x Plasma Electrode Ref: 0558001969. ◆ 10 pieces x Plasma 1.2mm Nozzle Ref: 0558002618. ◆ Torch Model: For Plasma Cutter Powercut 875 machine ... morewith PT-32 PT32 EH Plasma Torch. ◆ Consumables type: plasma Electrode and Nozzle.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Includes: 10 x ESAB 0558005220 - Electrodes. Esab Part 0558005220 Electrodes. Fits: ESAB® PT-37 & PT-38 Plasma Torches. Esab Part 0558007680 90A Nozzles. ... moreEsab Part 0558004875 Electrodes. Esab Part 0558004878 50A Nozzles.
Buy It Now
Free Shipping Condition: New Location: Hot Springs National Park, United States With our dynamic pricing model, our prices are always competitive. You're already purchasing the item.
Buy It Now
$109.99 Shipping Condition: Used Location: Wichita, United States THIS PLASMA CUTTER HAS NOT BEEN TESTED BUT SEEMS TO BE IN GOOD SHAPE .
Buy It Now
Condition: Used Location: Cedarburg, United States Esab Plasma Cutter. Max Output: 50 Amp. WE'LL DO OUR VERY BEST TO MAKE IT SO! SPEC'S SUBJECT TO FINAL INSPECTION.
$139.72 Shipping Condition: For parts or not working Location: Heron Lake, United States ESAB 0558008122 PowerCut 900 208-230V Plasma Cutting Machine with 50' PT-38 Torc Click an Image to Enlarge LT0558008122 Welcome to the Weldfabulous ... moreeBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. After winning an item in auction or completing a Buy It Now purchase. You have two check-out options: Check-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now. You will be notified by eBay via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. Payment We accept the following forms of payment. PayPal Visa. MasterCard, American Express, and Discover credit card payments through eBay Checkout Sales Tax Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 For shipment to Minnesota. Wisconsin, and Iowa addresses, we are required by State law to collect sales tax for the appropriate states. Tax rates are as stated below Minnesota: 6.875% Wisconsin: 5.5% Iowa: 7% Normal 0 false false false EN-US X-NONE X-NONE Domestic Shipping Continental United States UPS Ground and USPS Priority Mail are our standard shipping methods within the Continental US. We offer free shipping on all items except cylinders. UPS Ground requires 1 to 6 business days to arrive after leaving our facility and is fully traceable in route. We cannot ship large packages to PO Boxes so please be sure to provide us with a physical shipping address. For specific small. Low value items such as beanies, gloves, jackets, etc. we do offer US Postal Service Priority Mail for shipments withi
Buy It Now
$150.00 Shipping Condition: New Location: Poland Esab HandyPlasma 45i. ESAB HandyPlasma 45i. Maximum cutting capacity =16mm. Carbon Steel - 16mm. No need to adjust the gas –the machine automatically ... moredetects the inlet and outlet pressure. An automatic system purges gas after cutting, increasing the useful life of the consumables.
Buy It Now
Condition: Used Location: Roswell, United States It has been previously used but is in good working order, ready for its next project.
Buy It Now
Free Shipping Condition: New Location: Fremont, United States Such as CUT-40, CUT-40D, LGK-40, CT312, CT312D, CT416, CT-416D, CT518, CT518D, Super160, Super160P etc. The consumables can work with ESAB/L-TEC PT-31, ... moreJG-40 and WSD-LG40 Cutting Torch. These torches for Plasma cutting machines.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Esab Part 0558006600 + 0558006601 Retaining Cap + Shield. 1 x 0558006600 Threaded Retaining Cap for Esab. 1 x 0558006601 Gouging Shield for Esab. Esab ... morePart 0558006600 Retaining Cap. Esab Part 0558006601 100A Gouging Shield.
Buy It Now
Free Shipping Condition: New Location: Orangeburg, United States
Buy It Now
Free Shipping Condition: New Location: Tracy, United States The consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch. These torches for Plasma cutting machines. which fit 30/40A air plasma ... morecutting machine. 30 Pieces Gas Ring (part no.18785).
Buy It Now
Free Shipping Condition: New Location: Pacific, United States ® PT32EH Plasma Torch. 10 x 0558001969 Electrodes. 10 Pc - Plasma Electrodes for ESAB. ® PT-32 Plasma Cutters.
Buy It Now
Free Shipping Condition: New Location: Columbiana, United States New in packageShips as shown
Buy It Now
$5.00 Shipping Condition: New Location: Midland, United States PT32 Electrodes & Nozzles/ 1.2 for ESAB PT-32 Plasma Cutter 5 Each Pack.
Buy It Now
Free Shipping Condition: New Location: China ◆ Plasma Electrode Ref: 0558001969 10pcs/40pcs. Plasma Cutter Powercut 875 machine with PT-32 PT32 EH Plasma Torch. ◆ Plasma torch E l e c t r o de :05580 ... more01969. Fea t ure：.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States 10 x 20862 Electrodes. 20pc - Plasma Torch Nozzle Set. 10 x Electrodes + 10 x 40A Nozzles. Includes: 10 x 201008 - 40A Nozzles. 10 x Electrodes. Experts ... morein Plasma Cutting Parts, Service & Repair for over 10 Years.
Buy It Now
Free Shipping Condition: New Location: China High Quality Plasma Cutting Torch PT31, Flex and Durable Neck. 1 x PT31 torch with cable. This Torch Working with CUT50D CUT-50 CUT40 LGK-40 CT312，CT312D ... moreCT416 CT416D CT518 CT518D Cutting machine. HF Ignition, easy to start arc.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States 1 x 0558002393 Standoff - fits ESAB. Plasma Standoff for ESAB. ® PT32 Plasma Torch.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States 5 x 0558001969 Electrodes. ® PT32 Plasma Torch. Plasma Electrodes + Nozzles for ESAB. ® PT-32 Plasma Cutters.
Buy It Now
Free Shipping Condition: New Location: Orangeburg, United States
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Part #: 33366 Electrodes + 33369 50A Nozzles + 21616 End Cap. 10 x 33366 Electrodes +. 10 x 33369 50A Nozzles +. 1 x 21616 Heat Shield Retaining Cap -NOTE: ... moreCap Fits Very Tight. Fits Esab & L-Tec Linde PT-23 & PT-27 Plasma Torches.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Esab Handy Plasma 35i & 45i. Plasma Cutter Torch Parts 35 & 45A Nozzles. Experts in Plasma Cutting and Welding for over 10 Years. Swirl Baffle.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States 5 x 0558001969 Electrodes. 5 Pc - Plasma Electrodes for ESAB. Note: Esab has 2 air valves (inside electrode), these fit the smaller valve, larger horns ... moremay require slight machining of electrode. ® PT32 Plasma Torch.
Buy It Now
Free Shipping Condition: New Location: China Plasma Electrode Ref. Code: 0558005220. 10/40 pieces x 0558005220 Plasma Cutting Torch Electrode. Fit Plasma Cutter and Torch Model For PT-37 Plasma Cutting ... moreTorch. For PT-38 Plasma Cutting Torch. Plasma Cutting Current: 30-100A.
Buy It Now
$23.05 Shipping Condition: New Location: Ogden, United States ESAB Plasma Arc Torch Coolant 1 Gallon - New SealedNew Sealed Pictures of actual item
Buy It Now
Free Shipping Condition: New Location: Orangeburg, United States ESAB 21372 PLASMA ELECTRODE SEATS FOR PT-20AM, SOLD AT CLEARANCE PRICING. Condition is New. Shipped with USPS First Class Package.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Plasma Cutter Torch Parts 37887 Nozzles. 37888 Electrodes. 20282 Heat Shield. 18785 Swirl Baffle. PT-34 Esab Handy Plasma 125.
Buy It Now
Free Shipping Condition: New Location: Orangeburg, United States
Buy It Now
Free Shipping Condition: New Location: Orangeburg, United States
Buy It Now
Free Shipping Condition: New Location: China Electrode Reference Number: 20862. Plasma Electrode Ref: 20862 WSP-02008 x 5 pieces. Tip / Nozzle Reference Number: 20861. Plasma Tip Nozzle Ref: 20861 ... moreWSP-02011 x 10 pieces. Plasma Cutting Current: 50A.
Buy It Now
Free Shipping Condition: New Location: Aberdeen, United States PLASMARC ESAB 35886XL OEM 350AMP- 5 Pack - NEW/SEALED - Free Shipping. Plasma Cutter Electrodes
Buy It Now
Free Shipping Condition: New Location: Pacific, United States 2 x 33367 Swirl Rings - fits Esab. Experts in Plasma Cutting Parts, Service & Repair for over 10 Years. © PT-27 & PT-23 Plasma Systems. other parts for ... moreEsab.
Buy It Now
Free Shipping Condition: Used Location: Mount Dora, United States ESAB Plasma Gas Control PGC-3 P/N:0558008252.
Buy It Now
Free Shipping Condition: New Location: Mercersburg, United States ESAB Model 0558006601 100 Amp Gouging Shield For PT-37/38 Plasma Torch. Gouging Shield. PT-37/PT-38 plasma torch. Torch Amperage : 100. These are New ... morenozzles in original factory box.
Buy It Now
Free Shipping Condition: New Location: China Reference code 33366XL plasma electrode x 10pcs. Plasma torch electrode Ref:33366XL WSP-06005 x 10pcs. Plasma torch nozzle Ref:33418 WSP-06004 x 10pcs. ... morePT-23 / 27 plasma cutting torch consumables kit.
Buy It Now
Free Shipping Condition: New Location: China ◆ 10 pieces x Plasma Electrode Ref: 0558001969. ◆ Torch Model: For Plasma Cutter Powercut 875 machine with PT-32 PT32 EH Plasma Torch. ◆ Consumables type: ... moreplasma Electrode. ◆ Electrode Reference number:0558001969.
Buy It Now
Free Shipping Condition: New Location: Cool, United States This threaded retaining cap is designed for use with Esab® PT37 and PT38 plasma torches, making it a must-have accessory for any welder or metalworking ... moreprofessional. Crafted from high-quality materials, this cap is built to last, ensuring you can trust it to deliver optimal performance every time you use it.
Buy It Now
Free Shipping Condition: New Location: Corydon, United States ESA20324 Features: -Esab 20324 Plunger For PT-31XL Plasma Torch. -UNSPC CODE: 23271707. -Plasma Torch Parts Plasma Torch Parts welders accessories accessory ... moretorches part. -PT-31XL PLUNGER.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States 5 x 0558001969 Electrodes. ® PT32 Plasma Torch. Plasma Electrodes + Nozzles for ESAB. 5 x 0558002908 40A Nozzles.
Buy It Now
$5.40 Shipping Condition: New – Open box Location: Galion, United States We're Not Perfect! But when available in multiple quantity, the photo shown is representative of the item.
Buy It Now
Free Shipping Condition: New Location: North Las Vegas, United States
Buy It Now
Free Shipping Condition: New Location: Orangeburg, United States ESAB 0004470104 PLASMA RETAINER, AIR CURT. FOR PT-36 (REPLACES 37435).
Buy It Now
Free Shipping Condition: New Location: China Code: 0558005220 0558007680. ◆ 10 pieces x 0558005220 Plasma Cutting Torch Electrode. ◆ Fit Plasma Cutter and Torch Model ◆ For PT-38 Plasma Cutting Torch. ... more◆ Plasma Cutting Current:90A. In addition.
Buy It Now
Free Shipping Condition: New Location: China Reference number: 19917. Ampere: 80A. I will reply to help you within 24 hours. (Give us a trust and you are very satisfied.). 100% New and High Quality, ... moreIn-Kind Shooting ! List Included.
Buy It Now
Free Shipping Condition: New Location: China ◆Electrode Reference number : 0558001969. ◆Nozzle Reference number : 0558002837. 20 pieces x Plasma Electrode Ref: 0558001969. 20 pieces x Plasma 1.4mm ... moreNozzle Ref: 0558002837. ◆ Consumables type: plasma Electrode and Nozzle.
|
|
|
|
ESAB Handy Plasma 550 Plasmarc Cutter Welder 208/230 Volt PT-31XL Torch Leads
Ready to Go! ESAB HANDY PLASMA 550 Plasmarc Plasma Cutter manually cuts 1/2 inch and severs 5/8 inch- powerful cutting performance. Includes everything you need: console. 25 ft. PT-31XL torch, air filter/regulator, input power cord with plug, 25 ft. work cable with clamp. RETAIL PRICE: $2.500.00 Features: Economical price- tremendous cutting value for the money Compact portable design- goes to the job. Easily moved about Adjustable output- tailor the current to the material being cut Compact simple torch- easy access. Little maitenance Patented XT nozzles- extended shape gives good visibility Drag or standoff cutting- easy operation with little or no training Template following feature- easily duplicates curves or straight lines Tolerates poor power lines Specifications: Output 35 amps@ 40% duty cycle Input 208/230 vac 1ph. 50/60 Hz. 29/27 ... moreamps Power factor 81% Dimensions 6in.156mm)w x 12in.322mm)h x 14in.362mm) Weight 35 lbs.16kg) We will email you within 24 hours of the end of auction with payment info& combined shipping rate based on actual weight. If applicable. We generally ship within 1 business day of receiving your payment. We provide Insurance. Tracking and Delivery Confirmation on all packages at no additional cost. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. If you are bidding and have a problem with your PayPal account or you don't have a PayPal account. Please contact us about other forms of payment. Payment must be made within 7 days of auction end. Free local pickup is welcomed as well. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e7823c569-0x107-
|
|
|
ESAB handy plasma 125
Up for sale is a used ESAB plasma cutter. This unit is in perfect working order. Plugs into a standard 115 volt outlet. This unit will cut up to 3/16 inch thick material. Unit also has a built in compressor. No external air supply needed. SPECIFICATIONS HANDY PLASMA 125 Input Voltage. 115 V. 60 Hz Input Current@ rated load. 20 A@ 115 V Output Rating. 11 amps- 100 volts Open Circuit Voltage. 290 V DC max. Dimensions:Weight. 60 lbs(27 kg)
|
|
|
ESAB PCM 500i PLASMA CUTTER w/ 25' PT-31 TORCH
INPUT: 208/230 VOLTS. SINGLE-PHASE, AMPS: 30/26 OUTPUT: 32 AMPS DC AT 120 VOLTS DC. 40% DUTY CYCLE 22 AMPS AT 120 VOLTS DC. 100% DUTY CYCLE WEIGHT: 50 POUNDS DIM: 20 x 18 x 9 Seller is an authorized repair and warranty service center for all major welding brands. All machines have been thoroughly checked out and/or repaired and are in good working order. WE HAVE OTHER WELDING EQUIPMENT AVAILABLE. PLEASE BE SURE TO SEE OUR OTHER LISTINGS! TAG 1993
|
|
|
ESAB / L-TEC PLASMA CUTTER PCM-750I {WORKS BUT NEEDS REPAIRED} WATCH VIDEO
WORKS{BUT} BEING SOLD FOR PARTS OR REPAIR AS IT HAS ANN ISSUE AS STATED IN THE AD.SO ITS BEING SOLD AS- IS WITH NO WARRANTY OR RETURN. THIS IS AN L-TEC PCM-750I PLASMA CUTTER. L-TEC IS A DIVISION OF ESAB, THIS MACHINE WORKS AS SHOWN IN THE VIDEO BELOW, BUT IT WILL CUT FOR ABOUT 30 SECONDS AND STOP BUT AS SOON AS YOU HIT THE TRIGGER AGAIN IT WILL DO THE SAME THING OVER AND OVER,I HAVE NO IDEA WHATS WRONG,COULD BE EASY FIX? THE TORCH AND GROUND ARE IN GREAT SHAPE,THE TORCH IS EITHER A PT-23 OR A PT-27, ITS IN OVERALL DECENT SHAPE COSMETIC WISE BESIDES SOME MINOR MARKS ECT. ITS USED} ITS A 50 AMP MACHINE.SINGLE PHASE 220/230 VOLT. ITS BEING SOLD AS-IS FOR PARTS WITH NO WARRANTY OR RETURN. THE VIDEO IS POOR BUT YOU CAN SEE IT CUTTING A 1/2 PIECE OF STEEL.ITS A POOR CUT AS I WAS TRYING TO VEDEO AND CUT AT THE SAME TIME, SORRY,BUT YOU GET THE POINT,IT ... moreCUTS.
|
|
|
Esab 150 plasma cutting machine
Esab cutting system capable of cutting 1 inch plate at 4 ft. per. minute.
|
|
|
ESAB PCM 875 PLASMA CUTTER w/ PT-27 TORCH
SERIAL# PE-1829127 INPUT: 208/230 VOLTS AC. SINGLE OR 3-PHASE, AMPS: 55/26, 49/24 OUTPUT: 60 AMPS DC AT 120 VOLTS DC. 60% DUTY CYCLE 50 AMPS AT 120 VOLTS DC. 100% DUTY CYCLE WEIGHT: 87 POUNDS DIM: 21 x 17 x 19 MACHINE HAS REBUILT TORCH. 50’ PT-27, P/N 21621 Seller is an authorized repair and warranty service center for all major welding brands. All machines have been thoroughly checked out and/or repaired and are in good working order. Be sure to check out our other listings for welding equipment! tag 1841.
|
|
|
ESAB A2-A6 PROCESS CONTROLLER PLASMA BUG CUTTING RIG USED
ESAB A2-A6 PROCESS CONTROLLER PLASMA BUG CUTTING RIG USED. 1319LG012-CORNER ROOM-MO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ESAB PLASMA CUTTING POWER SOURCE SV1 450i cvcc USED
ESAB PLASMA CUTTING POWER SOURCE SV1 450i cvcc USED. 1319LG011-CORNER ROOM-MO Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ESAB PowerCut 650 Plasma Cutter 230 Volts Used
ESAB PowerCut 650 Plasma Cutter. 230 Volts. Used in working condition MSRP New: $1300. This is a USED item that appears to operate. Tested and inspected. The unit appears to cut sheet metal with no issues. Not tested on thicker metal. The fault light did come on once during our testing. Has some signs of use and there is a company name stenciled on both sides as shown in photos. Please refer to our video. Shipping Weight: 65 Lbs. Shipping Dimensions: 18" D x 32" L x 24" W Industry Recycles is much more than just another eBay seller. We are one of the first companies to innovate the art and science of Re-Commerce. To keep prices as low as our customers need them. We do not handle transactions over the phone. Many people feel initial frustration at this, but we do answer questions, when it is in our power to do so. We often direct ... moreour customers to a manufacturer's website. We do not recommend any product for any application, nor do we try to advise our buyers to purchase one product over another. NB/ 061113/ P16F/ 44320. InkFrog Analytics.
|
|
|
ESAB PCM-875 Plasma Cutter 208-230 Volts Parts or Repair
ESAB PCM-875 Plasma Cutter. 208- 230 Volts. Needs Repair This plasma cutter appears to be an unused shipping distressed item in NON-WORKING condition. We made several attempts to power up the unit on 208& 230 volts but the unit still will not power up. Fuse. Switch, and other components were energized and voltages were present. All the wiring connections appear to be good. Air system appears to be ok. There is a small section of the case that has been dented as shown in last photo. SOLD AS IS! If you can't fix it or send it out for professional for repair. Please do not purchase it from us! This is a non-returnable item. Shipping Weight: 65 Lbs. Shipping Dimensions: 18" D x 32" L x 24" W Industry Recycles is much more than just another eBay seller. We are one of the first companies to innovate the art and science of ... moreRe-Commerce. To keep prices as low as our customers need them. We do not handle transactions over the phone. Many people feel initial frustration at this, but we do answer questions, when it is in our power to do so. We often direct our customers to a manufacturer's website. We do not recommend any product for any application, nor do we try to advise our buyers to purchase one product over another. NB/ 061213/ P16F/ 44329. InkFrog Analytics.
|
|
|
ESAB Silhouette 500 CNC Plasma cutting table W/ PCM1125 & HL-90 & Burny 2.5RS
THIS IS A NICE CLEAN 2001-02 CNC PLASMA FROM A LOCAL HS SHOP CLASS. THE COMPLETE SET-UP IS AS FOLLOWS: 1- ESAB SILHOUETTE 500 TABLE AND TRACK SYSTEM(24X24) EXPANDABLE IN 24" INCRAMENTS CNC GAS/PLASMA Sn. 00-BUR-2.5-5126 1- ESAB PCM 1125 PLASMA CUTTER(1Ph) W/ 25' TORCH ASSEMBLY Sn.PA-J006053 1- BURNY 2.5RS CONTROLLER Sn.17257-01-01 1- LINTROL HL-90 TRACKING UNIT Sn.13632 3- MANUALS ONE EACH ESAB. BURNY AND LINTROL AS YOU CAN SEE FROM THE PHOTOS THIS IS A WORKING UNIT. SHOWN USING THE LINTRON TRACKING UNIT TO COPY A DRAWING. THE SCHOOL SOLD ME THIS UNIT WORKING, BUT I HAVEN'T BEEN ABLE TO SPEND THE TIME LEARNING THE BURNY MANUAL. 300 PAGES) THE CURRENT TABLE IS ABOUT 4' X4' WITH 24"X24" USEABLE TRACKING AREA. THIS COULD BE EXTENDED TO 24"X36" WITH THE ADDITION OF A FOOT OF DRIVE TOOTH TRACK. ESAB HAS ... moreEXTENSION KITS FOR THE TRACK& TABLE IN 2 FT INCRAMENTS. BURNY SUPPORTS THE 2.5RS AND HAS UPGRADES AVAILABLE. THE LINTROL HL-90 IS STILL THE INDUSTRY STANDARD. PHOTOS SHOW US CUTTING 1/4" MATERIAL IN AN DETAILED PATTEERN. WE ALSO USED IT TO CUT SOME REPEATABLE 1" THICK PARTS NO PROBLEM. JUST A LITTLE SLOWER SPEED. THIS LISTING IS FOR LOCAL PICK-UP. IF YOU REQUIRE SHIPPING WE WILL BREAKDOWN THE UNIT AND BOX IT ON A PALLET FOR $125.00. YOU'LL STILL PAY ALL SHIPPING COSTS FROM 80477. 4' X4' X2' PALLET BOX-300 + Lbs) LOCAL PICK-UP OR SALE TO COLORADO RESIDENTS REQUIRES WE COLLECT 3.9% SALES TAX. SHIPPMENTS OUT OF STATE HAVE NO SALES TAX. WE WILL SHIP ONLY TO THE LOWER 48 STATES! NO HI.AK OR CANADA/MEXICO OR OTHER.
|
|
|
Esab Cnc Plasma Cutter Parts
Esab cnc plasma parts. We have upgraded out machine so we are offering the parts that have been removed. All parts sold as is and buyer will be charged actual shipping costs. Items are located near Niagara Falls Ontario and pickup is also welcome. Included us the main control box with drivers. Manuals and paperwork. All the cables and connectors, circuit boards, servo motor. Please email with any questions before bidding. Posted with
|
|
|
esab plasma cutter pcm-1125
esab pcm-1125 plasma cutter cuts up to 1.25" very nice works great. 3 phase 575 volt ready to work{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13fcd4ba8cd-0xf8-
|
|
|
ESAB PCM750i Plasma Cutter
ESAB pcm 750i Plasma Cutter. This Plasma Cutter was in good operating condition when removed. It is 3ph and when we moved to our new building we only have single phase. Excellent Plasma cutter. Cuts 1" material and can gouge 1-1/2" Cuts 3/4" fast and clean. Comes with 20' lead and has a aux air filter. Also come with a complete Tip accessory kit. A plug and cord to accomodate your connection will have to be done. We had it hard-wired to keep someone from plugging in a single phase welder. Approximately 80 pounds.
|
|
|
ESAB PT-27 Plasma Torch Cutter Spare Parts Kit - 50 to 70 Amp - 21623
ESAB PT-27 Plasma Torch Cutter Spare Parts Kit- 50 to 70 Amp- 21623 This was purchased at a mechanics estate auction. He had a plasma cutter and this is the spare parts kit for it. The kit appears to be complete but I am not sure if there are any pieces missing from the original kit. The kit retails for $170.00. Check out the pictures. What you see is what you get. Heat Shield(2) 21616 Nozzle. 50-70 Amp(4) 33369 Swirl Baffle(1) 33367 Electrode(3) 33366XL Fuse. 15 Amp, 600 V(1) 952137 Stand-Off Guide(1) 21420 Check out my other listings. Numerous Tools and Misc. will be listed. Thanks for Looking and Good Luck bidding.
|
|
|
ESAB PCM-1000i Plasma Cutter, PCM 1000
ESAB PCM-1000i Plasma Cutter. PCM 1000 I received this plasma cutter in a excess sale. It was listed as condition code 7. Which is described as"Property which is unusable in its current condition but can be economically repaired" It was listed in this condition because the end of the power cable was removed(I don't know why) it can be easily replaced(see pictures) I have no way to replace the end of the cable so this plasma cutter is being sold"as-is" Overall it is in good condition. It has scratches due to normal use on a job site, the people from the excess sell did write some of the excess information on it with a black marker. It is also missing a wheel(see bottom) they can all be taken off or it can be replaced. Please contact me with any questions or requests for additional pictures. Thank you for checking out ... morethis listing. Please feel free to contact us for additional information! All of my items come from a smoke-free environment. Don’t wait to buy! All items are available for local sale; listing will be canceled if item sells locally. Inventory(1000i) Payment& Shipping Information We accept PayPal payments and will only ship to your eBay provided address! Multiple purchases(made same day) will be combined as much as possible to reduce shipping cost. Any combined savings(excluding items with free shipping) will be passed on to the buyer and refunded through PayPal. Best offer or auction payments must be received within 36 hours of winning notification. International Bidders(Outside USA) Sorry. We do not sell or ship outside the USA or to an APO/FPO address requiring a customs form. Feedback Positive Feedback will be provided with the completion of a successful transaction! Thank you for your business! Powered by The free listing tool. List your items fast and easy and manage your active items. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-140298c2ee6-0x107-
|
|
|
Esab L Tec PT-17A Plasma Cutter Cutting Plasmarc Torch 50' ft Lead 100 AMP Rails
ESAB L-Tec PT-17A Plasma Cutting Torch Excellent cutting capability–cuts up to 1 1/4 in. 31.75 mm) severs up to 1 1/2 in. 38.1 mm) pierces up to 1/2 in. 12.7 mm) Produce clean. High quality cuts Patented safety circuit for enhanced operator safety Operate with shop or cylinder air Compact. Lightweight design for ease of handling Long life electrodes lower operating costs Pilot arc starting–even starts on paint Gouging nozzles available Intermittent cutting capability for grate or expanded metal applications Standard and drag shield guards available for operator convenience, This is an Esab L Tec plasma cutting torch with a 50 foot lead. It has a track installed on it for stable smooth cuts adaptable to your existing system. The specially angled head is perfect for ultra clean cuts. This is the perfect torch for mechanics. Machinists, construction ... moreworkers, metal fabricators, and anyone who works with metal in general. THIS IS A NO RESERVE AUCTION. WE START OUR ITEMS LOW BECAUSE THIS IS AN AUCTION. WE WANT YOU TO BE EXCITED TO GET THIS ITEM AT A GREAT PRICE. BICTION WILL NOT ENTERTAIN BEST OFFER OPTIONS. IF YOU WANT THE PRODUCT. PLEASE BID ACCORDINGLY. PAYMENT IS DUE WITHIN 3 DAYS OF CLOSE OF AUCTION. IF YOU HAVE LESS THAN 10 FEEDBACK. PLEASE SEND ME AN EMAIL SO I KNOW YOU ARE NOT A BOT OR YOUR BID WILL BE CANCELED BICTION WILL ONLY SHIP TO THE LOWER 48 STATES. BICTION WILL ONLY SELL TO CONFIRMED PAYPAL ADDRESSES. THIS MEANS IF YOU HAVE WON THIS AUCTION. IN ORDER TO HAVE IT SHIPPED YOU MUST HAVE A CONFIRMED ADDRESS ON RECORD WITH PAYPAL. IF YOU ARE THE WINNING BID AND DO NOT HAVE A CONFIRMED SHIPPING ADDRESS, BICTION WILL REFUND YOUR MONEY AND OFFER THIS PRODUCT TO THE NEXT HIGHEST BIDDER. BICTION WILL MAKE SURE TO GET THE WINNERS THEIR ITEMS FAST! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ESAB, Plasma Oxy fueled GXB-1200 Shape cutter gantry
Used. Good shape. Needs repair, possible servo problem) Equipped with AUTOPATH GX controller. Width 12' with 30' travel length, table not included. As is- where is. Buyer responsible for cost of shipping. We can load onto suitable carrier.
|
|
|
ESAB ESP-100I plasma cutting power supply
ESAB ESP-100I ESAB ESP-100i: This ESAB Plasma ARC Cutting Package is a 3-Phaze. 50/60 Hz, 200V- 575V. This machine is clean and in exellent operating condition comes with the Mechanised tourch leads, parts kit and all manuals. Total shipping wieght is 420 lb. free image hosting and auction templates Antique-Central
|
|
|
ESAB PCM750i PLASMA CUTTER W/ TORCH
THIS LISTING IS FOR A ESAB PCM750i PLASMA CUTTER WITH TORCH. ESAB LISTS THE MAX CAPACITY OF THIS UNIT AT 3/4" MATERIAL. THIS IS A 230V 1Ph POWERED UNIT P/N 33980. IT IS SINGLE PHASE ONLY! THIS UNIT HAS THE FOLLOWING: 25FT GROUND CABLE 10FT POWER CABLE 25FT HAND HELD TORCH WEAR ISSUES: 1) NO HANDLES(SCHOOL USED WITH BUG-O AND MOUNTED ON CART) 2) TWO SMALL DENTS IN METAL COVER SHOWN IN PX. 3) NO GROMIT AROUND CABLE ENTRY. 4) PLASTIC AIR REGULATOR SHIELD HAS A CRACKED SCREW MOUNT. AND ONE BROKEN SCREW MOUNT. PROTECTS REGULATOR, BUT IS NOT PART OF REGULATOR. LISTING IS FOR LOCAL PICK-UP ONLY. WE WILL BOX FOR LTL SHIPPING FOR $35.00 AND MEET YOUR LTL CARRIER IN 80477. ALL OTHER SHIPPING COSTS ARE YOURS! NO INTERNATIONAL. APO'S, HI OR AK. IF YOU NEED SHIPPING. REMEMBER THAT THIS UNIT WEIGHS ABOUT 75# COMPLETE. IS 20" X 28" X ... more20" IF YOU PICK THIS UNIT UP. OR WE SHIP TO A COLORADO ADDRESS WE MUST CHARGE 3.9% STATE SALES TAX.
|
|
|
CNC Plasma Cutter,CYBERMATION, HVAC SOFTWARE, ESAB, Plasma Table, Hypertherm
Model– Cybermation 2200( GXAC 600) Serial– H70124 Specifications: Table Size 79” W x 176” L Maximum X Travel 73” Maximum Y Travel 163” Table Height 34” Equipped With: NO PLASMA Office Computer System with SCO Cybermation HVAC Software Downdraft Table MACHINE IS SOLD AS IS LOADED AS ONE PIECE WITH PC AND CONTROLS BANDED TO TOP OF TABLE. SOLD WITH NO RETURN OR REFUND, WAS UP AND RUNNING IN LOCAL SHOP AND THEY PURCHASED A NEW MACHINE AND KEPT THE POWER SUPPLY FOR HAN D APPLICATIONS. SHIPMENT: THIS WILL BE AN OVER WIDTH LOAD UNLESS DIS-ASSEMBLED! WILL DIS-ASSEMBLE AND BAND ON SKID TO SIT ON TABLE FOR $500.00 EXTRA
|
|
|
Esab PCM-875 Plasma Cutter Welder Torch 460V 3 Phase
Esab PCM-875 Plasma Cutter Welder Torch 460V 3 Phase Up for sale we have an Esab PCM-875 Plasma Cutter in working condition. The model PCM-875 has a cutting capacity of 7/8” and is rated at 60 amps. It comes with a 20 ft 1Torch SL60 torch gun and ground clamp. It operates on 460V. 3 Phase AC power. Another great deal on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer pays for shipping. Increased shipping charges to Hawaii. Alaska, Puerto Rico, and International shipments. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, or payment upon pick up. International buyers must pay by PayPal only. Bank wire transfer is also accepted ... morefor National and International sales over $1000.00. CA buyers add 9.0% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charged for all refunded items. Check out my other great items now!
|
|
|
ESAB ESP-150 Plasma Cutter System PT-26 Torch TR-21 Cart Hoses Great Condition
ESAB ESP-150 Plasma Cutting System In excellent condition. May have been used a dozen times. PT-26 Plasma Arc Cutting Torch TR-21 Truck and Cylinder Rack Kit(Cart) Purchased 3-31-06 Includes instruction manuals and wiring diagrams. Please e-mail me if you have any questions.
|
|
|
esab l-tec 84I 80 amp plasma cutter
ESAB/LTEC MODEL 84i PLASMA CUTTER PACKAGE. 80 AMPS OUTPUT ON 460 VOLT 3 PHASE INPUT.AIR PLASMA WITH MECHANIZED PT17 TORCH AND REMOTE START/STOP SWITCH CUSTOMER TRADED IN FOR A NEW HYPERTHERM 200 AMP MODEL. 460 VOLT 3 PHASE INPUT 16 AMPS DRAW. WE WILL BOX AND SHIP BUT WEIGHT IS 90 LBS FROM 02717 SHIPPING UPS
|
|
|
Esab Power Cut 650 Plasma Cutting Package
UP FOR SALE A ESAB POWERCUT 650 PLASMA CUTTING PACKAGE WE ONLY USED FOR AN SMALL PROYECT THIS IS A AS IS SELL NO WARRANTY OR RETUND SO PLEASE LET ME KNOW IF YOU HAVE ANY QUESTION BEFORE YOU BID. This ready-to-cut package delivers big machine cutting power in a rugged. Lightweight design for easy portability. It cuts up to 5/8 in. 15.9 mm) Features* Powerful cutting performance manually cuts 5/8 in. 15.9 mm) and severs 3/4 in. 19.0 mm) Adjustable output—tailor the current to the material being cut. Trigger lock-in for long-cut operator comfort. Patented XT nozzles—extended shape gives good visibility as well as good consumable life. Drag or standoff cutting—easy operation with little or no training. Template following feature—easily duplicates curves or straight lines. Arrives ready to cut, with torch connected and front-end parts in place, ... morefor the ultimate in operator Specifications: Cuts. 5/8 in, 15.9 mm Severs. 3/4 in, 19.0 mm Output* 40% Duty Cycle. 40 A, 120 V* 60% Duty Cycle. 30 A, 120 V* 100% Duty Cycle. 22 A, 120 V Output Current Range. 10 to 40 Amperes Input* 1 ph. 208/230 vac, 50/60 Hz, 35/32 A* 1 ph. 230 vac, 50/60 Hz, 35/32 A* 3 ph. 400 vac, 50/60 Hz, 9/6 A* 3 ph. 460 vac, 50/60 Hz, 8/5 A Open Circuit Voltage. 290 Vdc Nominal, N/A Power Factor* 40 A Output. 76% Efficiency* 40 A Output. 85% Dimensions* Length. 19 in, 483 mm* Length w/handles. 25.70 in, 653 mm* Width. 12.5 in, 318 mm* Width w/ opt. torch wra
|
|
|
esab Powercut Pc 1300 1600 plasma cutter Torch Head Hose PT38 PT 38 Lead gun
Used power cut 1300/1600 plasma cutter torch It looks like it may be the'75 torch but I'm not 100% it's got to be at least 50' but plan on'75 This was from a shop my brother works at. They bought all new machines and this was a spare torch they no longer need. I have a PC 1600 and I tested this it works fine. A set of fresh consumable your in business. Also please notice the tape in a few spots I didn't take it off but I'm sure it was either burned or cut and repaired. Item did test out 100% so no worries there. Sold as is free ship to the lower 48 only. All other please email me for a quote Posted with
|
|
|
Esab powercut 1250 plasma cutter 1 or 3 phase over 1" steel cutting capacity
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500 Selling a very nice Esab powercut 1250 plasma cutter. It has a 1 1/4" cutting capacity. It works very well. You can do either single or three phase input power 208/220/440/480 volt input. So it can be used with regular house current, or industrial power as well. Has about a 20' torch and ground clamp. FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. FLAT RATE SHIPPING OF $100 TO COMMERCIAL LOCATION IN THE U.S. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL ... moreUS AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
|
|
|
Plasma cutting system w/torch & hoses, ESAB Pcm 875
Plasma cutting system w/torch& hoses, ESAB PCM-875 S erial Number POR 1750061. Stock Number 36580. Works great I have little use for it now and I am cleaning the shop weight 55 lbs 18" long x 9" wide and 20" tall.
|
|
|
ESAB 1500 PLASMA CUTTER
ESAB 1500 PLASMA CUTTER PowerCut® 1500 PlasmarcTM Cutting Package The PowerCut® 1500 plasma cutting package combines the proven reliability of the PowerCut® 875 with the newly designed PT-32EH patented torch. The very strong composite case material makes the PowerCut® 1500 an excellent addition to any equipment rental fleet. The PT-32EH plasma cutting torch is designed to provide increased performance and longer consumable life resulting in higher production rates at lower costs. Multi input voltage(208) 230/460V. Easily changed on back of machine. Other voltages also available Cuts 1-1/2 in. 38mm) manually. 3/4 in. 19mm) mechanized New. Durable torch cable prevents snagging on fixtures and materials Designed for rugged treatment and outdoor use makes the PowerCut® an excellent choice for rental fleet and construction ... moresite uses More performance features than any machine in its class Delivers big machine cutting power in a rugged. Lightweight package Pilot arc start facilitates starting on painted and coated metals Long-life consumables and repairable torch minimize operating costs Arrives ready to cut. With torch connected and front-end parts in place, for the ultimate in operator convenience Trigger lock-in for long-cut operator comfort Built in line conditioner—handles poor power lines Auto Drag feature allows torch to drag on workpiece without damage to the nozzle for easy template following For longer nozzle life while drag cutting. A 40 amp nozzle is available(P/N 0558002908) Self protectant against improper input voltage Multiple troubleshooting lights on front panel Superior gouging performance Three-year warranty on console One-year warranty on torch Optional FIve-year warranty Specifications Cuts 1-1/2 in. 38mm) severs 1-3/4 in. 45mm) 1 ph. Input.208/230 vac. 1 ph, 50/60 Hz, 82/74 A 1 ph. Output. 90 amps@ 40% duty cycle 3 ph. Input.208/230 vac. 3 ph, 50/60 Hz, 44/40 A.
|
|
|
ESAB PLASMA CUTTER POWER CUT 1500
For Sale by private party ESAB POWERCUT 1500 Plasma Cutter in like new condition. The PowerCut 1500 plasma cutting package combines the proven reliability of the PowerCut-875 and 1125 with the newly designed PT-32EH torch. The very strong composite case material makes the PowerCut- 1500 an excellent addition to any equipment rental fleet. The PT-32EH plasma cutting torch is designed to provide increased performance and longer consumable life resulting in higher production rates at lower costs. Multi input voltage(208)230/460V. Easily changed on back of machine. ■ Cuts 1-1/2 inch ■ Designed for rugged treatment and outdoor use makes the PowerCut an excellent choice for rental fleet and construction site uses. ■ More performance features than any machines in its class. ■ Delivers big machine cutting power in a rugged, lightweight package. ■ ... morePilot arc start facilitates starting on painted and coated metals. ■ Long-life consumables and repairable torch minimize operating costs. ■ Arrives ready to cut, with torch connected and frontend parts in place, for the ultimate in operator convenience. ■ Trigger lock-in for long-cut operator comfort. ■ Built in line conditioner– handles poor power lines. ■ Auto Drag feature allows torch to drag on workpiece without damage to the nozzle for easy template following. ■ For longer nozzle life while drag cutting, a 40 amp nozzle is available(P/N 0558002908) ■ Self protectant against improper input voltage ■ Multiple troubleshooting lights on front panel ■ Superior gouging performance ■ Three year warranty on console. ■ One year warranty on torch. Specifications: PowerCut-1500 Cuts 1-1/2 in. 38mm) severs 1-3/4 in. 45mm) 1 ph. Input. 208/230 vac, 1 ph, 50/60 Hz, 82/74 A 1 ph. Output.90 amps@ 40% duty cycle 3 ph. Input. 208/230 vac, 3 ph, 50/60 Hz, 44/40 A. 230/460 vac, 3 ph, 50/60 Hz, 40/27 A.
|
|
|
Plasma Cutter Ground Lead Lincoln Miller Hypertherm Thermal Dynamics Esab
This is for a good Used ground cable for a Plasma cutter. I do not know what size gauge the wire is but would be good for a light duty cutter. 12' Long. If you have any questions please call me 810-343-2781 Please check out my other equipment& Tools in my eBay store Price listed for shipping is to the lower 48 states only. Please ask for a quote in other areas or for international.
|
|
|
ESAB 14 ft wide CNC Plasma Torch Frame MODEL GXB-1000
This a very high quality Plasma or Cutting Torch CNC piece of equipment. Removed from a plant. No motors or controller. Rails are 6 ft each. with mulitiple pieces options. ESAB is one of the best companies for these torches and they still manufacture a frame similar to this. If you want to build up this to cut metal 40 ft long and 12 ft wide. You can do it with this foundation. HEAVY HEAVY HEAVY Frame.
|
|
|
ESAB Piecemaker 2 Plasma Cutting System
Plasma cutter. Fully functional. But there is an issue with the torch returning to its"home" position after running a program. The issue is known to ESAB, and it will require replacing a printed circuit board in the controller. Otherwise the system works perfectly.
|
|
|
ESAB 14 ft wide CNC holds Plasma Torch Frame MODEL GXB-1000
Local Pickup only. will not ship. This a very high quality Plasma or Cutting Torch CNC piece of equipment. Removed from a plant. No motors or controller. Rails are 6 ft each. with mulitiple pieces options. ESAB is one of the best companies for these torches and they still manufacture a frame similar to this. If you want to build up this to cut metal 40 ft long and 12 ft wide. You can do it with this foundation. HEAVY HEAVY HEAVY Frame.
|
|
|
Esab plasma cutter Sorry..duplicate listing
Purchased from business liquidation auction. Item is in good condition
|
|
|
L-TEC PCM100 PCM-100 PLASMARC PLASMA CUTTER CNC MACHINE TORCH MULTI GAS ESAB
WarnerSales Warner See all my listings: WarnerSales L-TEC PCM100 PCM-100 PLASMARC PLASMA CUTTER CNC MACHINE TORCH MULTI GAS ESAB Offered is a L-Tec Plasmarc Plasma Cutter. Model: PCM-100. Description: Included: Hand Torch(PCH-102) with 20' cable. Machine Torch(PT-20AM) with 48' cable. Good. Used working condition. This was taken to a certified welding service center where it was checked for function, and is working 100% FREE SHIPPING TO THE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as we can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. ... morePayment must be made within 5 days of purchase commitment. If payment is not received within five days. An unpaid item case will be filed with eBay in order to recover our listing fees. Sales Tax: We are required to charge 6% sales tax for items sold to Iowa residents. LTL Freight Shipping: We provide free LTL freight shipping within the U.S. to the lower 48 states to a business address with a dock or forklift. Or for pickup at the terminal nearest you. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. We can provide shipping with lift gate service to a residential or business address for an additional fee. All Alaska/Hawaii and International buyers. Please be aware that we will not ship freight internationally. We will ship to a U.S. based freight forwarder of the buyers choosing.This must be arranged prior to payment. Buyer will be responsible for all further transportation arrangements and charges. Local Pickup: Johnston. Iowa) Pickups are welcome. You may pay cash at that time. Please contact us to make arrangements. As Is" Items: Items m
|
|
|
ESAB POWERCUT 1500 plasma cutter as is 230/460 single or three phase
for sale is an ESAB powercut 1500. sold as is for parts. unit has an issue in the output section. powers but does not cut. shipping is going to be at least 100$ email for a shipping quote. complete with torch power cable and ground. 230/460 single or three phase. Posted with
|
|
|
AIRCO plasma cutter PCS-53 by ESAB
Too costly to repair.Parts cost more than the customer wanted wanted to spend on repair. Selling to recoup Inspection/Estimate labor. parts are expensive! SO get this unit to repair yours. NO RETURNS.
|
|
|
ESAB 1000 I Plasma Arc
This is a really nice used Plasma Arc ESAB 1000 I which is one of the nicest machines made for commercial use. I actually bought it for a big job I had bid and then used it once in a while but not heavy use. I'm selling my little shop a piece at a time and retiring. I gave a lot for this machine but it worked perfect for thick stuff. I put a new tip assembly on it because the other one was a little crappy and then I had the spare so I figured I might as well put it on. It has a 50 foot torch and a nice ground cable. I used compressed air most of the time and it has an air regulator and water trap. I also used it on 220 volt 3 phase. If you need one this is it. I have a reserve but it is about a fourth of what I bought it for. This wa about 3800.00 new. Have fun bidding. I will package very carefully and send it ups. Naturally it is AS ... moreIS but it works fine. 1913 5942478. Have fun bidding.
|
|
|
ESAB Powercut 875 Plasma Cutter with 25 Ft torch WORKING CONDITION
ESAB Powercut 875 Plasma Cutter with 25 Ft torch WORKING CONDITION You are bidding on the following: One used ESAB Powercut 875 plasma cutter Cables are 25 feet in lengt Serial No. PK-J525049 Stock No. 0588002190 Manual can be seen at link below http:edgewh.esabna.com/literature/Plasma%20Equipment/Cutting%20Packages%20-20Systems/Manual%20(ONLY)20Cutting%20Packages/Domestic/Powercut-875_F-15-653-J.pdf. Check out our other great deals at I will ship international but bidder must contact first for total shipping charges. Any questions please let me know. We accept all forms of PayPal payment. Item will be shipped for FREE. AK. HI, and PR bidders please message before purchasing as an additional fee will be required for shipping. All items paid by 1pm EST are shipped same day Monday-Friday. Paypal payment must be received within 7 days. We gladly ... moreleave positive feedback after positive feedback is received. All non paying bidders will be reported to ebay according to ebay's rules and regulations. Returns gladly accepted on all new items. Unfortunately at this time we cannot accept returns on open box/used items. Restocking fee for new item returns is 10% Buyer responsible for return shipping. Restocking/shipping fee does not apply if item received is not item represented in auction. Any questions at all please let us know. Our goal at Ideal Discounts LLC is to provide a great value to all our customers. We strive to complete every transaction with excellence and boast an incredible 100% positive feedback. We look forward to doing business with you in the future. Please contact us if you have any questions. Any questions at all please use ebay's system. We answer all questions within 24 hours. THANK YOU AND GOOD LUCK.
|
|
|
PLASMA CUTTING TABLE - KEMPER - ESAB - 4 ZONE Downdraft with fan 1600 x 2000
Hi what we have for sale today is an: KEMPER PLASMA CUTTING TABLE- DOWNDRAFT near new! This item was purchased for a research project that is now entering it's next phase. So a bigger machine is on it's way. Solidly built this is no toy. 4 separate downdraft zones, the profile machine as it moves over the cutting tale triggers pneumatic switches that open flaps to the independent zones. Includes exhaust fan(3 phase) and is in excellent condition. Table area is 1600 x 2000. Forklift available for loading and item is located in Cheltenham. Inspection is available BEST QUALITY! RPP of $6.575.00 each plus taxes Grab an absolute bargain Please note that the picture is of the actual goods Bid with confidence. Brand new in original packaging! GST invoice with goods for Australian businesses. Low starting price. Plenty more quality brand ... morenames to list. Check out many of the other automation and engineering products we are listing. Pick-up is fine and we can box the unit for international delivery. Please note: Pictures form part of the description. If in doubt please email for further information. Check out my
|
|
|
ESAB Sidewinder 55 Plasma Cutter
Model, S 55 Description, plasma cutter Power Requirements, 460 V 20.0 A 3 Phase works great thanks for looking this unit is in ellenton fl pick up only thanks for looking. If not happy full refund great working order.
|
|
|
ESAB Plasma Cutter ESP 100i Plasma Cutter
ESAB Plasma Cutter ESP 100i Plasma Cutter In good working condition when it recently taken out of production. Only comes with what is pictured. NO" ground cable or torch included. Please look at all the pictures for detailed condition of the plasma cutter. Local Pick up only or Buyer arranges shipping. Thank you!
|
|
|
ESAB Shadow 2 CNC Plasma Table - Need New Control Panel
We have a used ESAB Shadow 2 with a 200 amp power source. The panel stopped working. So we decided to buy a new one. Estimates on a new panel was around $15000. Maybe a after market is available for less money. This was purchased new around 11 years ago and used it part-time on one shift for 4 years, then used it seldom over the past 7. The burn thickness could go past 1" However the comfort thickness was 3/4" or less. Can fit a 8' x 10' in its burn area. All software, leftover consumables, manuals are included. Any questions. Please ask. Thank you!
|
|
|
ESAB ESP-150 PLASMA CUTTER WATER COOLED
ESAB ESP-150 PLASMA CUTTER* MACHINE IS IN EXCELLENT CONDITION AND VERY CLEAN- NEW TORCH& ONE LEAD REPLACED- RUNNING GEAR KIT(WHEELS. CART, W/BOTTLE RACK) OPTIONAL ACCESSORIES- INSTALLED! INPUT VOLTAGE: 230/460 VOLT. 3-PHASE QUESTIONS: 281 7314955 OR EMAIL ESP 150 This heavy-duty. Water-cooled plasma cutting and gouging system provides the perfect solution for production cutting and plasma gouging. The ESP 150 can cut up to 51 mm manually and can sever 63 mm. Using either an Ar/H2 mixture or compressed air. Gas options for higher quality cuts. Especially on aluminium and stainless, resulting in lower total operating costs– the PT 26 torch cuts with nitrogen or argon-hydrogen mixtures; choice of carbon dioxide, air, nitrogen or oxygen for torch cooling. Delivery includes The ESP 150 package includes a 7.6 m leather protected PT 26 torch. ... moreTorch wear part kit, 7.6 m work cable, dual cylinder rack/wheel kit, regulators/filters, torch hooks, torch coolant and gas hose. Output Ratings Output Current AC 140 A VAC Out 120 VAC Duty Cycle 100% Output Current AC 150 A VAC Out 120 VAC Duty Cycle 90% Dimensions Height 31.5 in. Length 40 in. Width 21.75 in. Weight Weight 756 lb Cutting Specifications Cuts Manual 2 in. Input Ratings Amps 121/112/70/64/56/45 A Frequency Hz 50/60 Hz Phases 3 VAC 220/230/380/415/460/575 VAC Open Circuit Voltage. VDC 370 VDC QUESTIONS: 281 7314955 OR EMAIL
|
|
|
ESAB PowerCut 650 208/230 Plasma Cutting Machine - Very Good Condition Cutter
ESAB PowerCut 650 208/230 VAC Plasma Cutting Machine- Very Good Condition Pre-Owned In Very Good Condition The cutter has been previously used. And has been well cared for. It does not appear to have been used much. Some light handling marks here and there. But no heavy wear or damage. All of the wires/cabling are in great shape with no damage or repairs. The cutter works great and does not have any issues. You will have to provide your own air supply/hose. But everything else is there, to get you started. The tip of the cutter. Has some carbon buildup, but that's to be expected. Those can easily be replaced when the time comes. Shipping will be automatically calculated by eBay. Based on your location. Local pickup is welcomed- sales tax applies. Manufacturer's Specifications: External dimensions. LxWxH, mm, 406x318x419, Weight. Kg, ... more25, Enclosure class. Protection, IP 23S, Mains supply. V/Hz, 230. 3ph 50/60 +-10% Fuse. Slow, A, 25, Mains cable. Ø mm2, 4x6, Max output at 40% duty cycle. A, 40 Open circuit voltage. V, 290, Power factor at max current, 0.76, Efficiency at max current, 85% Setting range. A, 10-40 Air. L/min, 118, Pressure. Bar, 5.5, Cutting capacity. Fe mm, 16, All of the pictures are of the actual item up for sale. Please use the pictures to better determine the condition. The pictures are considered part of the description. SEE PICTURES Please Feel Free to Contact Me With Any Questions Shipping: I only ship to confirmed addresses- Double check to make sure you address is current& confirmed. If an item sells for $200.00 or more. The shipper will send it with signature requirement. Shipping is calculated. Based on your location. Shipped with UPS Ground. To a physical address- NO PO Boxes Alaska. Hawaii WILL incur an ad di tio nal shippi ng cost. p lease ask for a quote before bidding. NO BUY IT NOW! Sorry. No shipping out side the USA. Please pay with PayPal. Good luck! Colorado residents please pay sales tax. P35-231963-1. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%
|
|
|
ESAB PCM 875 PLASMA CUTTER CHEAP ESAB
I bought it almost new. It still does look new. It came right out of a box. Everything looks fine. The only reason I am selling it is because 230v is needed to power this bad boy. And my shop doesn't have the power to power this. My loss is your gain. I priced this machine lower than any other listing i saw on Ebay, so this has to be a great deal. This air-cooled package. Which is immediately ready for use, is the ideal solution for fast, powerful cutting on a practical, compact machine.
|
|
|
ESAB Plasma Cutter Spare Parts, PT-17 Torch
19989 Guard. Drag, 1 new, 1 used 19990 Guard. Std, 2 new 19499 Shroud. 2 new 20747 Heat Shield. 4 new 19915 Cutting Tip. 40 amp, 3 new, 2 used 19916 Cutting Tip. 60 amp, 5 new, 2 used 19917 Cutting Tip. 80 amp, 6 new 20056 Cutting Tip. 100 amp, 3 used 19918 Electrode. 2 new, 7 used 19114 Baffle. 4 new, 2 used- tarnished 20053 Electrode Adapter. 2 new, 2 used 19498 Shroud Cap. 3 used 19129 Wrench. 1 used
|
|
|
ESAB AIRCO PCS-40 PLASMA CUTTING SYSTEM w/ PCH-62 TIP
ESAB AIRCO PCS-40 PLASMA CUTTING SYSTEM w/ PCH-62 TIP CODE: 1452 SERIAL NO: PH812023 PLEASE NOTE: THE REGULATOR GAUGE FACE IS MISSING MOUNTED ON CASTERS FOR EASY PORTABILITY INPUT: 230 SINGLE PHASE OUTPUT: 100 VOLTS 40 AMPS DC MEASURES: 31" x 19" x 34" WEIGHT: 239 LBS LOADING FEE: $20 COMES AS SHOWN IN PHOTOS Click Here. Double your traffic. Get Vendio Gallery- Now FREE! G63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14888b093e3-0x111-
|
|
|
ESAB CXA Oxy Acetylene Torch Cutting Table Shape Cutter lk cnc plasma
ESAB CXA Oxy Acetylene Torch Cutting Table Shape Cutter lk cnc plasma Up for sale we have an ESAB CXA-64 Oxy Acetylene Torch Cutting Table in working condition. We hooked up both torches to oxygen and acetylene tanks and they both shoot out a cutting flame. The torches also travel forward and back and side to side. It also has a variable speed function to travel at a desired cutting speed. It currently has 7 feet of track to move side to side. But if you add more track and roller support you can go more than 14 feet. The travel from front to back is 4 feet. The is also a smaller cutting table to lay material on and it measures 8ft x 4 ft. Another great deal on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. ... moreShipping Buyer is responsible for shipping charges. The table will be shipped in two pallets from Hayward. CA 94545. Pallet#1 weighs 980 and measures 96"x64"x38" Pallet#2 weighs 1100 lbs and measures 121"x64"x58" Local pick up is free and welcomed. We have often surprised our customers with low shipping quotes. Please call me at 408-205-9062 for the best overall price. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, and payment upon pick up. International buyers must pay by PayPal only. Bank wire transfer is also accepted for National and International high dollar sales. CA buyers add 9.0% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charge
|
|
|
Esab Plasma Cutter Power Cut 650
Very good condition. Barely used. 208v/240v ideal size, best reliable brand.
|
|
|
esab plasma cutter powercut 700
you are looking at a esab powercut 700 plasma cutter the plasma cutter has only been used a couple of times and is in great condition Cut 5/8 in. Sever 3/4 in. Output Current 50A. Input Voltage 208-230V 1ph 50/60 hz. Input Current 208V 1ph: 41 230V 1ph: 41. Duty Cycle 25% 50A 1ph. Dimensions W = 15 in. 380 mm) H = 8.3 in. 210 mm) D = 22 in. 558 mm) Weight 47 lbs. 22 kg) Gas supply Automatic air pressure. Torch Lead Lengths 25 ft. 7.6 m) 50 ft. 15.2 m) Generator friendly Tool-less quick disconnect torch Disconnects from the machine without the use of wrenches or special tools. Voltage booster Useful when finishing off thick material in ease. Also ideal for the inexperienced operator to cut in confidence. 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-149151fa490-0x111-
|
|
|
Esab Powercut 1500 90 amp plasma cutter
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is a 90 amp Esab plasma cutter in overall good condition.There are a few scuffs on the cabinet but it operates as good as new. It was recently checked out by Esab and has new IGBTs installed.It has approximately 10 hours of use on it since it was serviced It comes with a new 25 ft PT-32EH hand torch and a new ground lead. There is a new set of 90 amp consumables in the torch and I have 3 new spare electrodes and nozzles to go with it. It's hooked up and working and potential customers are welcome to try before they buy. This a 90 amp machine capable of cutting up to 1 1/2" thick steel. These are industrial duty machines built to last. You will need a fairly large air compressor to keep up with it. It will operate on 230 single phase 230 3 phase 460 3 phase ... morePlease ask any questions before bidding. The sale is final. If anyone wishes to see a video of it cutting I will glad to make one and post it. I can ship it but the buyer will be responsible for all shipping arrangements and costs involved.
|
|
|
1 USED ESAB PCM 875 PLASMA CUTTER WITH EXTRAS *MAKE OFFER*
Welcome to Canarsky& Daughters. We are here to sell these items. We are looking forward to doing business with you. So have fun browsing and buying. Reasonable offers are always welcomed. SEARCH OUR STORE BY CLICKING HERE! ATTN: Please read all of our updated terms and conditions posted below before bidding. If you have difficulty with these terms. Please write us with your concern. By placing your bid. You accept these terms and agree to abide by them. THIS LOT CONSISTS OF: 1 USED ESAB PCM 875 PLASMA CUTTER WITH EXTRAS. NOTE: THIS ITEM IS VERY LARGE/HEAVY AND MUST BE SHIPPED BY TRUCK. OR OTHER SHIPPING SERVICE, AND/OR IS AVAILABLE FOR LOCAL PICKUP. SHIPPING MUST BE ARRANGED BY BUYER. WE ARE NOT ABLE TO CALCULATE THE CURRENT COST OF SHIPPING THIS ITEM. PLEASE CHECK WITH YOUR SHIPPING SUPPLIER. BUYER IS RESPONSIBLE FOR ARRANGING FREIGHT, ... moreAND NOTIFYING US WHEN PICK UP IS ARRANGED. CONDITION: USED SURPLUS. NO REASONABLE OFFER REFUSED. The approximate shipping weight is 90 lbs. All items are sold"as is" Unless described as"new" above. Items are used. We do not have the facilities to test most of these items. You are only buying the item(s) pictured/described. ALL TECHNICAL QUESTIONS/PROBLEMS SHOULD BE ADDRESSED THROUGH EBAY CHANNELS FOR THE FASTEST POSSIBLE SERVICE. IF SENT TO OUR EMAIL ADDRESS. YOUR CORRESPONDENCE WILL GO TO THE JUNK FOLDER, AND WILL NOT GET ADDRESSED. Please note. We are not experts in these fields and so may not be able to give you the answers you require. We will, however do our best to find the information you request. THANK YOU FOR YOUR COOPERATION. This item must be settled for immediately. All items not settled for in full will be relisted or sold at our discretion and appropriate feedback will be left. Please be sure to enclose a proper and correct shipping address(street address) EBay ID number. The total due is always equal to the total of 1) the agreed amount of the item and 2) the actual shipping costs and 3) a $5.00 domestic. Or a $10.00 int
|
|
|
Esab Piecemaker 2 Cnc Plasma table
Up for sale is a Used Esab Piece maker 2 Cnc plasma system in amazing shape with very little use. In near perfect condition. Table is setup for vent but could be converted easily to a water table. Includes box of extra consumables. Esp 50 power supply with additional cover all manuals original invoices. Decided to go a different route in our fab shop This machine is a work horse and barely used Mfg is 2006 and has less than 20 hours of run time This unit with options sells for over $65k and has seen very little use Bid with confidence. I will help answer any questions you may have or take additional pics if needed. Shipping is the sole responsibility of purchaser Sold as is where is deposit through paypal with balance made by wire transfer, Bank check or cash. All funds must clear prior to releasing equipment SPECS OF POWER UNIT ARE AS FOLLOWS ... moreT ESP 50/ PT-35 Mechanized Plasma Cutting Package Cuts: 1/2 in(12.7 mm) Output@ 100% duty cycle 50 A, Air Requirements@ 60 PSIG(117.9 l/min. 4.1 bars) 250 CFH, Dimensions Width: 10.1 in(275 mm) Length: 20.3 in(576 mm) Height: 18.3 in(465 mm, Weight 85 lbs(38.6 kg) Input@ 35 A/ 120V 208/230 vac. 1 ph, 50/60 Hz, 46/42 A, 1 ph. 208/230) 208/230 vac. 1 ph, 50/60 Hz, 46/42 A, 3 ph. 208/230) vac. 3 ph, 50/60 Hz, 22/20 A, 3 ph. 208/230) 208/230 vac. 3 ph, 50/60 Hz, 22/20 A, 3 ph. 230/460) 400/460 vac. 3 ph, 50/60 Hz, 12/11 A,
|
|
|
ESAB Eclipse 2.4 Gantry Plasma Shape Cutting Machine
ESAB Eclipse 2.4 CNC Gantry Plasma Shape Cutting Machine. S/N 99-VISNT-4341, New 1999. Stock# 31918 Specifications and details per original factory quote: Eclipse 2.4 Meter(8' Wide Basic Gantry Assembly Rugged All Steel Construction with the Capability of Carrying 4 Process Tools- Electronics Control- Electronics Cable Package- Dual Side Rail Axis Drive System- AC Digital Brushless Drives- Planetary Gearboxes- Cross Axis Powertrack Systems- Contour Cutting Speed Range of 2- 1000 IPM- High Speed Rapid Traverse Drive System(1000 IPM) Note: Maximum Plate Thickness Capacity of Table 1" 4.572 Meter(15' Heavy Duty Pedestal Mounted Machined Linear Ways Rail System- Effective Cut Length of 3.6576 Meters or 12 Feet- Rail Axis Power Track Carrier System- Hose and Cable Input System- 8' Wide x 12' Long Air Exhaust Cutting Table- ... moreRemovable Slag Drawers That Pull Out From The Right Side While Facing Machine Equipped with: Vision Windows NT Based Cutting Machine Controller 10.4" VGA Color LCD Monitor 8 Position Joystick for Manually Moving Machine Hand Wheel to Simplify Screen Navigation. Scrolling and Manually Inch the Machine for Precise Positioning Floppy Disk Drive with Protective Door 2.1 Gigabyte Hard Disk Drive Air Conditioner for Vision Control Series 2000 G-Code Compatibility(Standard Processes Only) Divided Cut Area Provides 3 Additional Work Zones Programmable Cutting Parameters Plasma Control Interface for ESAM Plasma Systems Precision Plasma OMNI"Soft Touch" Station ESAB Precision Plasmadc Cutting System ESAB Precision Plasma 100 Ampere Inverter Power Supply Torit Exhaust Filter system Model DFT-2-8 Box of Manuals Original new price in 1999 was $222.000.00 USD. Offered as is. As removed from service. Buyer responsible for verifying equipment and all specifications if deemed necessary. PRICE: $27.500.00 USD FOB TRUCK DAYTON OH. Offered locall y an d subject to prior sale. Also su bject to the standard MD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically unsat
|
|
|
esab plasma system (2) esp 400c power supplys and torches PT-15XL
Here are a(2)power supply's. PT15-XL torches and(2)cooling units and most everything off of our esab system as far a plasma cutting. A ton of consumables are also included. Our computer took a dump on our machine and we went to up grade our system and Lincon welding came in and did a retro fit on our complete system instead of just the computer. So basically we took everything off that said Esab. These power supply's worked GREAT we could cut 2" steel all day long, the are realy work horses. Unfortunately the computer was junk and we had to do something FAST. Esab was a month out and lincon was a week.I had a hot job coming so I spent some money. Let me know if you have any questions. Everything worked great minus the computer. If you found a computer and a table you could have this 100,000 plasma running for a fraction of the ... morecost.
|
|
|
ESAB POWERCUT 1600 PLASMA CUTTER Xtra Consumables 75' PT38 Torch Nice Shape
This is a very nice Aesop power cut 1600 plasma cutter. Runs on 208/220 V it includes a 375 75 foot PT– 38 cutting torch. This machine works great. I purchased it from a small aerospace company who used it very lightly. They did have an issue with the digital screen and replaced it with a PC 1300 screen from a damaged machine so on start up it does say PC 1300 scrolling across. I was a little skeptical when I was purchasing it and I called Aesop and ran the serial number which is in the pictures included in this ad in it comes back as a PC 1600. I guarantee the machine to be in full working great condition and to be a PC 1600 Contact me for free freight before buying to make sure you qualify. All freight must go to a commercial address. Please call 203-841-8088 with any questions or to set up commercial free freight. Also included is extra ... moreelectrodes(believe 2 or 3) and approx 5-6 new heat shields
|
|
|
2006 Esab Shadow 2 Plasma & Oxy Fuel Burning System (#1271)
DESCRIPTION: 10’ X 12’ CAPACITY DUAL DRIVE PLASMA BURNING SYSTEM WITH VISION PC BASED CONTROLLER. ESP-100I 100 AMP PLASMA POWER SOURCE, DUAL OXY FUEL TORCHES AND AC YASKAWA BRUSHLESS DRIVE SYSTEM. GENERAL SPECIFICATIONS. Max Cutting Width: 136” Max Cutting Length: 144” Max Cutting Thickness: 4” Maximum Clearance Between Sideframes: 143” Drive Speed Range: 2-400 IPM. Max Cutting Amperage: 100 AMPS. Maximum Plasma Cutting Thickness: 0- 1.00” Aprox) Resource Link: Plasma Power Source Manual. Gantry Features: Rack and Pinion Drive System. Heavy Wall Box Beam Design, Precision Hardened and Ground Cross Beam Guiding System. Precision Planetary Gear Boxes and Cross Axis Powertrack and Hose Cable Carriers. OXY/FUEL SPECIFICATIONS: Number of Torches: 2. Maximum Cutting Thickness: 4” Lifters: Motorized. Ignition: Manual. CONTROLLER SPECIFICATIONS: ... moreMake: Esab. Model: Vision 1000. Input Interface: Ethernet. Floppy DD. Electrical Requirements: Machine/Controller: 120V 1 Phase 20 AMP Power Esab ESP-100i Plasma Power Source: 200/230/380/415/460/575V 3 Phase(65-25 Amps depending on voltage) System Weight: 6.200 LBS Aprox. Approx. Overall Installed Dimensions: 179” X 42” X 65” H(Main Machine) EQUIPPED WITH. 15’ Of Total Track Length. Dry Downdraft Cutting Table, Vision PC Based Controller. 22” X 28” X 32” Plasma Power Source@ 380 LBS) PRICE: $29.500. NEED MORE INFO ABOUT THIS MACHINE? CALL Dave AT 813-444-4558. Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes. De-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyers purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desire
|
|
|
Esab ST5000 plasma cutter table CNC 2 torch system 10x30' cutting area 750 amps
Nice working Esab ST5000 plasma cutter that was removed from a Boeing facility. Make: ESAB Automation. Inc. Model: ST-5000 Type: CNC Gantry Plasma Cutter Serial No: 0220 Mfg. Year: 1993 Features/Specifications: Control: L-TEC Series 2000/70 Cutting Stations: 2 Cutting Area: 12' x 30' approx. 2) ESAB Flow Controllers 115V- 5A- 60 Hz P/Ns: 2235714(2) ESAB ESP600 power supplies 600A output Hypertherm water chiller system 2 torch; 600A capacity Fume collector trough Dimensions: Gantry Width(overall) 201" Gantry Height: 83" Gantry Floor Rail Length: 438" Table/Tub Width: 138" Table/Tub Length: 378" approx. Table/Tub Height: 32" Footprint(as shown) L 438" x W 236" x H 83" Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment Regular. ... moreThorough maintenance performed since new call 920-946-7610
|
|
|
Fineline 100pc plasma cutter Esab plasma control and torch height board
For sale is a 100 PC Fineline plasma cutter. Torch assembly, all hoses(50 footers) spare parts for torch(nozzels etc) Also included is the control head and torch height control board. I do not have enough power to turn these guys on so they are being sold as parts. I do have some manuals and a lot of spare parts for torch. Plasma power supply appears to be clean inside and I have the side cover panels. I get great rates on freight or you can use your own carrier.
|
|
|
Esab 625i plasma cutter
Tested and works good very lightly used and very clean comes with manual
|
|
|
ESAB Plasma Cutting Guide Kit 0558003258, Plus Extras
ESAB plasma cutting guide kit 0558003258. Good used condition as well as a box of consumables, tips, cups and more
|
|
|
L-TEC / ESAB PCM-750i Plasma Cutter, & Accessories Kit - 230V / 1phase - 50A
L-TEC PCM 750 I plasma cutter with tips and accessories we have owned this since new and used very little works great plug in and go!
|
|
 |