|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$9.00 Shipping Condition: Used Location: Grand Rapids, United States Cutter/Holder is Used.
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States Cutter/Holder is Used.
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States Cutter/Holder is Used.
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States Cutter/Holder is Used.
Buy It Now
Free Shipping Condition: New Location: Houston, United States Specifications:Cutting Diameter: 25mm / 0.98"Cutting Depth: 3mm / 0.12"Shank Diameter: 12mm / 0.47"Shank Length: 80mm / 3.15"Total Length: 100mm / 3.94"Number ... moreof Flutes: 6 FlutesMaterial: Tungsten Carbide (Tip), High Speed Steel (Shank)Package Included: 1pcs x T-Slot Milling CuttersDescriptions:Tungsten carbide tip has good toughness, high hardness, wear resistance and heat resistance. It has good cutting strength and offers faster cutting speeds than other substrates.Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc..The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States For 1/2" thread or larger 12-32 TPI. Tooth pitch 0.35-0.4. Blade count (F) 3. -. 98" (25mm) Depth of Cut Clearance.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States For 1/2" thread or larger 12-32 TPI. Tooth pitch 0.35-0.4. Blade count (F) 3. -. 98" (25mm) Depth of Cut Clearance.
Buy It Now
Free Shipping Condition: New Location: United States Specifications:Cutting Diameter: 20mm / 0.79"Cutting Depth: 3mm / 0.12"Shank Diameter: 12mm / 0.47"Shank Length: 80mm / 3.15"Total Length: 100mm / 3.94"Number ... moreof Flutes: 6 FlutesMaterial: Tungsten Carbide (Tip), High Speed Steel (Shank)Package Included: 1pcs x T-Slot Milling CuttersDescriptions:Tungsten carbide tip has good toughness, high hardness, wear resistance and heat resistance. It has good cutting strength and offers faster cutting speeds than other substrates.Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc..The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States It is suitable for carved, high-speed machines, and it can be used for milling of copper, aluminum, tool steel and cast iron. It is suitable for milling ... moreof copper, aluminum, tool steel, cast iron and so on.
Buy It Now
$26.30 Shipping Condition: New – Open box Location: Altoona, United States Niagara Staggered Tooth Side Milling Cutter 12" Dia X 9/16" Width 1-1/2" Arbor… have 2 of them… both have some surface rust from sitting as seen in pictures… ... morecutters were never used… 500 each obo
Buy It Now
Free Shipping Condition: New Location: China 1pcs KM12 50-22-4F. Bore Dia(d):22mm. Large inventory and spot sales. texture of material ：Alloy steel. 10PCS SEKT1204. 1 X 400R 50-22-4T.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States It is suitable for carved, high-speed machines, and it can be used for milling of copper, aluminum, tool steel and cast iron. It is suitable for milling ... moreof copper, aluminum, tool steel, cast iron and so on.
Buy It Now
$4.50 Shipping Condition: New Location: China T-type milling cutter. High-quality milling cutter, the top three quality. Type: 25mm×5mm×12mm×90mm×8F---1pcs. Tooth height ；5mm. Total length: 90mm.
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States Cutter/Holder is Used.
Buy It Now
$8.00 Shipping Condition: New Location: Grand Rapids, United States Cutter/Holder is NEW.
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States Cutter/Holder is Used.
Buy It Now
$5.00 Shipping Condition: New Location: Waddell, United States AlTin Coated. - Full Teeth 25mm (.98") Length of Cut.
Buy It Now
$13.12 Shipping Condition: New Location: PRESCOT, United Kingdom Cuts materials up to hardness of : HRC45. HRC45 60 DEGREE CHAMFER END MILL. HRC45 120 DEGREE CHAMFER END MILL. HRC45 4-FLUTE FLAT SLOT DRILL END MILL. ... moreMills are ungashed so unsuitable for spot drilling.
Buy It Now
$4.60 Shipping Condition: New – Open box Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
$5.00 Shipping Condition: New Location: Waddell, United States For M5 thread or larger. 45-1.00mm. -. 47" (12mm) Depth of Cut Clearance.
Buy It Now
$4.60 Shipping Condition: New – Open box Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
$13.20 Shipping Condition: New Location: Duson, United States This part is a Milling Cutter. The Cutter has 12 Teeth.
Buy It Now
$5.75 Shipping Condition: Used Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
$5.75 Shipping Condition: Used Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
$4.60 Shipping Condition: New – Open box Location: Council, United States MAY HAVE SOME STAINING ON TEETH FROM PROTECTIVE COSMOLINE COATING THAT WAS REMOVED FOR INSPECTION AND PICTURES. I will be listing similar item daily. ... morePlease put me on your favorites list, visit my store and check back often and take advantage of my combined shipping offer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
$9.79 Shipping Condition: Used Location: Joshua, United States Used cutter. Could probably use sharpening.
Buy It Now
$4.90 Shipping Condition: New Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
Free Shipping Condition: New Location: Cranbury, United States 45° included angle, Right hand cutting.
Buy It Now
$23.02 Shipping Condition: Used Location: Houston, United States Save a ton.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States For 1/2" thread or larger 12-32 TPI. Tooth pitch 0.35-0.4. Blade count (F) 3. -. 98" (25mm) Depth of Cut Clearance.
Buy It Now
Free Shipping Condition: Used Location: McKeesport, United States Sold as shown.
Buy It Now
$9.80 Shipping Condition: New Location: East Jordan, United States Part # 12J1B2081R01. Ingersoll 2" Hi-Pos Indexable End Mill. APKT Style Insert.
Buy It Now
$1.23 Shipping Condition: Brand New Location: China For cutting HSS steel,Stainless steel,Alloy steel,Cast Iron,etc.
Buy It Now
$2.99 Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: Lansing, United States MPN: No.25-3601-202-11. Width of Cut: 4mm.
Buy It Now
$8.00 Shipping Condition: Used Location: Byron Center, United States
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States For 1/2" thread or larger 12-32 TPI. Tooth pitch 0.35-0.4. Blade count (F) 3. -. 98" (25mm) Depth of Cut Clearance.
Buy It Now
$4.60 Shipping Condition: Used Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
$14.95 Shipping Condition: New Location: Tullahoma, United States This cutter appears to be new and never run; however, it appears to be missing most of the hardware. (shims, shim screws, insert screws). Insert Type: ... moreR245-12 T3 .
Buy It Now
$10.95 Shipping Condition: New Location: Tullahoma, United States Insert Type: AOMT 1204 . EDP: 3024802.
Buy It Now
Free Shipping Condition: Used Location: Ventura, United States Title: UTD Co. 6" x 3/4" x 1-1/4" Arbor HS-12 Milling Cutter. We're down to earth, easy to work with people.
Buy It Now
Free Shipping Condition: New Location: China 1× AL-KM12 100-22-5T Milling Cutter Head. 10Pcs SEHT1204AFFN-X83 H01 Insert s. Color: Silver. We will try our best to reduce the risk of the custom duties. ... moreModel: AL-KM12 100-22-5T+SEHT1204AFFN-X83 H01.
Buy It Now
Free Shipping Condition: New Location: Cranbury, United States 45° included angle, Right hand cutting.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States Part Number : MM12-0.62-6.7-0-1023 (This tool matches this labeling, however, the labeling on the tool is MM12-0.62-6.7-2.36L-0). MM12-0.551-R2-MD05 F30M. ... moreMM12-0.551-R2A8-E04 T60M. MM12-0.551-R2A8-E04 F30M.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States Part Number : MM12-0.50-2.2-0-0003. MM12-0.551-R2-MD05 F30M. MM12-0.551-R2A8-E04 T60M. MM12-0.551-R2A8-E04 F30M. MM12-0.551-M04 T60M. MM12-0.551-B90S-E05 ... moreF30M. MM12-0.551-B120P-M05 F30M. MM12-0.539T-R0.8-D05 T60M.
Buy It Now
$14.50 Shipping Condition: New Location: Lansing, United States Overall Length: 5". Length Of Cut: 1.12".
Buy It Now
$40.00 Shipping Condition: New – Open box Location: Valencia, United States Includes the original wooden box as pictured. Width of cut varies between 4-12 mm based on snhq inserts used. Cutting inserts not included. Sat on a shelf ... moreand was never used.
Buy It Now
$24.99 Shipping Condition: Used Location: Leander, United States Ingersoll Cutting Tools 12" cutter 66W6B1216R02 3035304-A
Buy It Now
$5.50 Shipping Condition: New Location: China Blade length ；3. For aluminum Quantity；1. {{titleaboutus}}.
Buy It Now
$4.90 Shipping Condition: New Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
$4.90 Shipping Condition: New Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
$1.23 Shipping Condition: Brand New Location: China Number of Flute:2. Hardness:HRC50 for cutting Aluminum,Copper,Iron,Ordinary Steel,Heat Resistant Steel,Stainless Steel, Ti Alloy,etc. Overall Length:60mm-150mm.
Buy It Now
$8.65 Shipping Condition: Used Location: Lansing, United States MPN: 104350828U.
Buy It Now
Free Shipping Condition: New – Open box Location: Cameron, United States The 80.0VX.92 high feed cutters are the best solution when specifically focusing on reducing. and are ideal for a wide range of applications. Facing, ... moreslotting pocketing, ramping and helical. These cutters absorb vibration and generally reduces the instability and deflection of the tool.
Buy It Now
$174.28 Shipping Condition: Used Location: Pottstown, United States
Buy It Now
$8.00 Shipping Condition: Used Location: Byron Center, United States
Buy It Now
Free Shipping Condition: New Location: Cranbury, United States 60° included angle, Right hand cutting.
Buy It Now
$9.79 Shipping Condition: New Location: Joshua, United States 1 1/4" bore. 1/4" thick.
Buy It Now
Free Shipping Condition: New – Open box Location: Portland, United States Section during checkout.
Buy It Now
$10.95 Shipping Condition: New Location: Tullahoma, United States Insert Type: SCET 120612T-M14.
|
|
|
|
SECO 3" Plunge Milling Cutter 6 Flute (R220.79-03.00-12)
SECO Plunge Milling Cutter R220.79-03.00-12(Roughing Operations) Mill Diameter: 3" Height: 2" Arbor Size: 1" Number of Flutes: 6 Direction: Right Hand Compatible Insert: SC. 1206\ Max RPM: 9.600 This item is used and comes as shown with 6 screws and 5 inserts. Will ship out one day after receipt of payment.
|
|
|
MILLING MACHINE CONCAVE CUTTER 5/8 X 3 1/2 X 1 1/4 MORSE USA 12 TEETH #2743A
DESCRIPTION MILLING MACHINE CONCAVE CUTTER 5/8 X 3 1/2 X 1 1/4 MORSE U.S.A. 12 TEETH ITEM IS USED INVENTORY#2743A Please browse our store and other listings for more cutters. We offer combined shipping. If you have any questions feel free send me a message.New items arriving daily so if you dont see what you want please check back. TERMS and CONDITIONS We try to describe every item to the best of our ability. Although we do have experience in the tooling industry. We don't know everything. Please ask questions and we will answer you promptly. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the ... moreresponsibility of the buyer. 3: We Do Not End Auctions Early. So; Please Do Not Ask! 4: Items may be returned for a refund of purchase price if item is not as described in ad. Please notify us within 14 days. Shipping charges are non-refundable unless we have made a mistake in our ad. 5: When we say it is NEW; It will be never used or old stock. 6: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. 7: Concerning Calibration; Items are not tested or calibrated unless otherwise stated PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Used Iscar APK D0.75-1.12-W.75-FE Milling Cutter Stock #0770
Used Iscar APK D0.75-1.12-W.75-FE Milling Cutter Stock#0770* I have 3 available- 2 of them come with inserts 1 of them do not. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13ec8be2921-0xf6-
|
|
|
60 deg. Dovetail Milling Cutter 12 Tooth 2.215 X 1.125 3/16 Radius 1" Shank HSS
60 deg. Dovetail Milling Cutter 12 Tooth 2.215 X 1.125 3/16 Radius 1" Shank HSS This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS Priority Mail and cost $11.50. Powered by SixBit's eCommerce Solution 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13edcacded0-0xed-
|
|
|
MACHINIST TOOLS MILLING **LOT OF 12 PIECES *FACE MILL CUTTER BLADES
UP FOR AUCTION PRECISION MACHINIST TOOLS& PARTS· LOT 12 PIECES· FACE MILL CUTTER BLADES· 7 PIECES HAVE A 1” CENTER HOLE· SOME HAVE NEVER BEEN USED& SOME ARE SLIGHTLY USED AND IN GOOD WORKING CONDITION* PLEASE REFER TO ALL PICTURES TO SEE CONDITION* Very well maintained and cared for by a seasoned professional machinist. PLEASE REFER TO ALL PICTURES TO SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* Being SOLD AS IS– Do not know much about machinist tools but will try to describe as best I can. I am in the learning process. So any feedback will be appreciated. No RETURNS. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. ... moreOR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE AND WILL TRY TO WORK WITH YOU AS BEST I CAN. SERIOUS INQUIRIES ONLY. Please wait until auction has ended and invoice has been received to confirm all costs to buyer.
|
|
|
SEKN CARBIDE INSERT FACE MILL milling machine cutter CARBOLOY R220.13-04.00-12
good used carbide insert mill cutter CARBOLOY R220.13-04.00-12 approx 4" cutting dia x 1 1/2" pilot hole 1 broken shim screw looks like it will hold SEKN 42 inserts will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Carboloy Seco 3" Dia. Face Milling Cutter, R220.13-3.00-12, Used, WARRANTY
Title: Carboloy Seco 3" Dia. Face Milling Cutter. R220.13-3.00-12, Used Description: Our Internal Stock# L4-3(6-6-13 dale) You are about to purchase the following item: 1- Carboloy Seco 3" Dia. Face Milling Cutter. R220.13-3.00-12, Used Type# R220.13-3.00-12 3" Dia. face Mill Cutter. 6 carbide Insert Pockets. Made to fir 1" Shell End Mill Holder 2" Thick Body All Steel Construction Complete with Carbide Inserts MADE IN USA THIS UNIT IS USED AS TAKEN FROM WORKING SERVICE IN GOOD WORKING CONDITION. Full 30 day return privilege if found defective(freight prepaid by buyer) SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ... moreALL shipping fees incurred. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege. Unless item it marked“SOLD AS IS” For returns, freight must be pre-paid by the buyer. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Payment: PayPal is our preferred method of payment. If you have a question on payment options. Please feel free to call us. Contact Information: First Choice Industrial Services. LLC 4
|
|
|
DEAL! 12" OK TOOL INDEXABLE SLOT MILLING / PLANER CUTTER - 2" ARBOR
Made in the U.S.A. by OK Tool Co. Inc. This is an indexable slot milling cutter in good condition. Stamped Into Side: 6012SX1 15/64 40-50918 Specifications: Cutting Diameter: 12" Cutting Width: ~0.6" one cutter width measured with a caliper) Arbor Hole: 2" Indexable Stations: 22(only 11 currently have cutters installed) Comes as shown in pictures.
|
|
|
Goddard & Goddard Indexable Mill Milling Cutter Carbide Inserts 12” x 7/16”
Goddard& Goddard Indexable Mill Milling Cutter Carbide Inserts 12” x 7/16” Condition: Used. In good shape. Specifications: Manufacture: Goddard& Goddard· Diameter: 12” Face Width: 7/16” Hole Size: 2” Please see photos for additional details. Shipping: This item is NOT available for international Shipping. Please be aware that if you reside in California we charge 8.00% Sales Tax. Returns: 14 Day Return Policy. If the items is not as describe please contact us within 14 days of arrival unless otherwise specified. We are not responsible for return shipping. Please note what is pictured is what is included in the sale unless otherwise specified. If you have any questions regarding the item please don’t hesitate to ask!
|
|
|
Large 18 Tooth Side Milling Cutter 12 1/2" Dia x 1 1/2" Wide x 1 1/2" - 2" Arbor
We have a Large 18 Tooth 12 1/2"x1 1/2 Side Mill Milling Cutter up for Grabs! Cutters Dimensions: 12 1/2" Diameter. Aprox 1 1/2" Thick, And Both 2" and 1 1/2" Arbor Holes.Cutter Weighs 30lbs.Unknown Brand Cutter.A Couple of the Blade Inserts are Chipped, Some May Need to Be adjusted Before Use! The Cutter Is in Good Used Condition Overall. Wear From Use is Noticable"Please See Pics and Determine the Condition of them for yourself Before Bidding as Peoples Description of Wear Varies" Please Note. These Products Came From a Shop Environment"Triumph Tooling& Manufacturing Co. And Will Show Signs of Shelf Wear"As Can Be Seen in the Photos"Dollar Bill is For Size Referance Only and is Not Included" Other Bits from the Same Company"Including New. Used, Refinished and Damaged Bits" ... moreWill Be Available on My Site, Please Check Back To See What I Have Available! Great Milling Bit for a Great Price. Dont Let This One Pass you By! I Have Alot of Assorted Vintage and Modern Merchandise that I will be Offering up for Auction.Most Items come from Bulk Merchandise Purchases.All Will Be Auctioned With NO RESERVE! As Always Bid With Confidence and Please Profile Before Bidding!If For Any Reason you Are Not Satisfied with the Merchandise I Am Here to Help Resolve any Issues there May Be! All Of My Auctions are Calculated Based on Weight and the Rates of USPS. Please Factor your Bid Around the Shipping Cost you Decide to Choose! I Offer Competitive Prices on Everything I Sell.If You Win Multiple Items off of My Site I Will Combine The Shipping and the Charge will Be based on Package Weight and USPS Rates"This Includes Penny Items"Please Contact Me in the Event you win Multiple Items So i can Send you a Updated Invoice Reflecting the Combined Shipping Discounts! If You See More Items ending on Another Week and would Like to Combine Shipping on them. Just Message Me and Inform Me that you are Not Done Shopping until you Buy Them.Pay Only after you are Done S
|
|
|
Valenite Milling Cutter 6T02 SN6S-03-12-16-4
Valenite Milling Cutter 6T02 SN6S-03-12-16-4 Quantity Available: 1 Shipping Weight: 54 lb(AEC 114 3.5.C. L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional ... morecharge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(
|
|
|
RT&T 12" x 1.2195" x 2-1/2" Milling Cutter PT-89540
RT&T 12" x 1.2195" x 2-1/2" Milling Cutter PT-89540 Quantity Available: 1 Shipping Weight: 35 lbs(AEC 234 4.16.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no ... morecontrol over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an o
|
|
|
Lovejoy 12" Milling Cutter 08-03305-01-00 PT-90369
Lovejoy 12" Milling Cutter 08-03305-01-00 PT-90369 Quantity Available: 1 Shipping Weight: 26 lbs(AEC 232 4.16.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over ... moreand is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone.
|
|
|
Valenite Face Milling Cutter SN6S-03-08-12-4 1-72517-05
Valenite Face Milling Cutter SN6S-03-08-12-4 1-72517-05 Quantity Available: 1 Shipping Weight: 22 lbs(AEC 220 4.12.B L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over ... moreand is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone.
|
|
|
Valenite 7-1/2" Milling Cutter SN6S-03-08-12-4 1-72517-05
Valenite 7-1/2" Milling Cutter SN6S-03-08-12-4 1-72517-05 Quantity Available: 1 Shipping Weight: 22 lbs(AEC 217 4.12.B L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control ... moreover and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by
|
|
|
Valenite 12T01 Milling Cutter SN6S-03-10-12-4 R
Valenite 12T01 Milling Cutter SN6S-03-10-12-4 R Quantity Available: 1 Shipping Weight: 37 lbs(AEC 216 4.12.B L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an ... moreadditional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please c
|
|
|
Lovejoy Tool Co. 12" Milling Cutter 1103-3695-0001 PT-88685
Lovejoy Tool Co. 12" Milling Cutter 1103-3695-0001 PT-88685 Quantity Available: 1 Shipping Weight: 20 lbs(AEC 215 4.12.B L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control ... moreover and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order b
|
|
|
Iscar Milling Cutter APK D.75-1.12-W.75 FE- Stock # 0770-2
Used CNC Parts* Specializing in selling quality used parts Description: Iscar Milling Cutter APK D.75-1.12-W.75 FE*Includes All Insert Mounting Screws& Inserts* Item Number: 0770-2*Returns are not excepted* Sign up for my email newsletters by adding my eBay Store to your Favorites Looking for Quality CNC Machines visit www.ABLTechnology.com
|
|
|
UNION TWIST DRILL MILLING CUTTER 5" X 3-4" H.S-12
Union Twist Drill Co Milling Cutter. Good used condition see photos.
|
|
|
Walter Horizontal Tipped Milling Cutter / Side and Face Cutter F2052 125SB/12
Walter Horizontal Tipped Milling Cutter/ Side and Face Cutter F2052 125 SB/12-14 Used. Some Surface Rust as Visible in Picture Sold as Seen- No Returns No Reserve VAT is included in the price LP38 Contact Information: Findurstuff Limited Unit 17 Shrub Hill Industrial Estate Cromwell Street Worcester Worcestershire WR4 9EW Office- 01905 26426 Mobile- 07967 201942 E-mail- sales@findurstuff.com Opening Times: We are open Monday to Friday 9am-5pm. However you MUST call before coming over, as there is not always someone on site. Postage Due to Royal Mails price increase all UK items will be sent using My Hermes who estimate delivery within 3-5 days from booking. Parcels are booked on and then collected from us the next day, this a fully trackable service. If items are heavier then 10 Kgs we will send with Parcelforce. Parcelforce can take a maximum ... moreof 30 Kgs and is a 48 Hour service. Should the item be heavier it will be sent using Palletline, prices vary depending on location, please email us with your postcode and we will send you a quote. You are welcome to collect any item won, however 24 hours notice MUST be given to ensure your item is at this site. Payment and Collection: Payment is expected within 3 days of the auction close. Unless prior arrangements have been made. Payment can be made by Cheque, Paypal, Bank Transfer, Cash on Collection or Credit Card(Please call the office if you wish to make a Credit Crad Payment) You are welcome to collect any item, but at least 24 hours must be given, as not all goods advertised are on this site. Collection is to be done within 14 days, unless prior arrangements have been made. VAT Invoices: A full VAT invoice is supplied with all purchases. Our VAT number is: GB884 3483 88. If you require any further information or would like to speak to one of us. Please do not hesitate to call or e-mail. If there is no reply, please leave a message and one of us will come back to you shortly. Thank you Verity and James Aston Findurstuff Limited
|
|
|
Lovejoy CAT60 Tool Holder P/N 1804.2A.10X & Milling Cutter C17A 2109-15-11/12
Lovejoy CAT60 Tool Holder P/N 1804.2A.10X& Milling Cutter C17A 2109-15-11/12 Quantity Available: 1 Shipping Weight: 252 lb. AEB 217 W2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have ... moreno control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place
|
|
|
SECO 12-3/4" x 1" x 2-1/2" Milling Cutter D-113355
SECO 12-3/4" x 1" x 2-1/2" Milling Cutter D-113355 12-3/4" Cutting Diameter 1" Thickness 2-1/2" Bore Quantity Available: 1 Shipping Weight: 25 lbs(AEM199 12.3.C L1) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which ... moreare charged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help
|
|
|
Lovejoy Tool Co. 9" x 2" x 2" Milling Cutter SN6S-03-08-12-4
Lovejoy Tool Co. 9" x 2" x 2" Milling Cutter SN6S-03-08-12-4 9" Cutting Diameter 2" Thickness 2" Bore Quantity Available: 2 Shipping Weight: 29 lbs(AEM198 12.3.C L1) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges ... morewhich are charged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can hel
|
|
|
Carboloy 1.25" 4 Flute RH R217 Indexable Milling Cutter R217.69-01.25-3-12-4A
Carboloy 1.25" 4 Flute RH R217 Indexable Milling Cutter R217.69-01.25-3-12-4A Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive all items are sent same day if bought and payed for before 12.00 noon Monday- Friday Before 10Am Sat if not it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy Thank You For Viewing
|
|
|
Valenite 6" Carbide Insert Face Milling Cutter, 12 - Inserts, VMM-92-6-0612R
Title: Valenite 6" Carbide Insert Face Milling Cutter. 12- Inserts, VMM-92-6-0612R Description: Our Internal Stock# L5-27(10-23-13 RN) You are about to purchase the following item: 1- Valenite 6" Carbide Insert Face Milling Cutter. 12- Inserts, VMM-92-6-0612R Catalog# VMC-79-6-0406-R 6" Dia. Cutter 12 Inserts To be mounted on a 1-1/2" Shell End Mill Holder VAL-U-MIL There are carbide inserts in cutter now. They should be replaced. No wrenches or additional inserts with this item. 2-3/8" Thick Steel Body Complete MADE IN USA. This unit was taken directly from working service in good working condition. Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture ... moreof the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for corre
|
|
|
6" Carbide Insert Face Milling Cutter, 12 - Inserts, 1-1/2" Shell Mill, COMPLETE
Title: 6" Carbide Insert Face Milling Cutter. 12- Inserts, 1-1/2" Shell Mill, COMPLETE Description: Our Internal Stock# L5-25(10-23-13 RN) You are about to purchase the following item: 1- 6" Carbide Insert Face Milling Cutter. 12- Inserts, 1-1/2" Shell Mill, COMPLETE Catalog# Unknown 6" Dia. Cutter 12 Inserts To be mounted on a 1-1/2" Shell End Mill Holder VAL-U-MIL There are carbide inserts in cutter now. No wrenches or additional inserts with this item. 2-1/4" Thick Steel Body Complete MADE IN USA. SPECIAL NOTE: BELIEVE THIS IS A VALENITE CUTTER BODY. CAME IN WITH A GROUP OF TOOLING AND HOLDERS. VIRTUALLY EVERYTHING WAS VALENITE TOOLS. This unit was taken directly from working service in good working condition. Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid ... moreby Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements
|
|
|
Valenite 4" Carbide Insert Face Milling Cutter, 12 - Inserts, VMC-82-6-0406-RA
Title: Valenite 4" Carbide Insert Face Milling Cutter. 12- Inserts, VMC-82-6-0406-RA Description: Our Internal Stock# L5-6(10-28-13 RN) You are about to purchase the following item: 1- Valenite 4" Carbide Insert Face Milling Cutter. 12- Inserts, VMC-82-6-0406-RA Catalog# VMC-82-6-0406-RA 4" Dia. Cutter 12 Inserts 2 Rolls of Inserts in this cutter. see pics) To be mounted on a 1-1/2" Shell End Mill Holder VAL-U-MIL There are carbide inserts in cutter now. They should be replaced. No wrenches or additional inserts with this item. 2-3/8" Thick Steel Body Complete MADE IN USA. This unit was taken directly from working service in good working condition. Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may ... morebe representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped V
|
|
|
Kennametal 8"x1"x1.5" Indexable milling cutter 12 insert triangular
Used but in good condition with minimal scratches. Includes inserts however some are chipped.
|
|
|
UTD Straight Tooth Milling Cutter 5 3/4 x 1/12 x 1
Straight Tooth Milling Cutter UTD Co. Athol 5 3/4 x 1/12 x 1 MSC Direct $499.33#2109
|
|
|
F90SD-D2.0-.75-12 ISCAR 2" MILLING CUTTER
F90SD-D2.0-75-12 ISCAR 2" MILLING CUTTER 2" DIA 5 FLUTES 1.570 TALL.75 AH TYPE A ARBOR A++ CONDITION VERY LIGHTLY USED IF USED AT ALL SOME MINOR CORROSION FROM SITTING AROUND OUT OF THE BOX NO PACKAGING HARDWARE OR ANYTHING ELSE IN THIS AUCTION. JUST THE CUTTER THIS CUTTER IS STILL BEING SOLD BY ISCAR. ALL HARDWARE AND INSERTS ARE AVAILABLE FROM YOUR LOCAL DISTRIBUTOR QDMT 1205 STYLE INSERTS
|
|
|
Concave Milling Cutter 12T Mill Bit 2 3/4"ODX9/16" Shaft 3/4"ODX2 3/16" 12 Teeth
726 The shaft has been welded onto the bit and shows wear. The bit shows little wear. Bit is concave has 12 teeth. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
SECO 1.25" Square Shoulder Milling Cutter Coolant Fed R217.69-01.25-0-12-3A
A Seco Milling Cutter# R217.69-01.25-0-12-3A used with inserts. This tool has been modified from stock to a 5 inch over all length and a 2.9 inch depth of cut. It has a 1.25 Weldon shank and can be coolant fed. What you see is what you get.
|
|
|
UTD CO. PLAIN MILLING CUTTER 4" X 2" X 1 1/4" BORE HS-12 18 TOOTH NICE
UTD COMPANY PLAIN MILLING CUTTER 4" DIAM. X 2" WIDE X 1 1/4" BORE 18 TOOTH CUTTING WHEEL THIS ITEM APPEARS TO BE IN GOOD WORKING CONDITION WITH NO APPARENT CHIPS. PLEASE USE THE ZOOM OPTION TO SEE UP CLOSE WHAT YOU ARE PURCHASING. THIS ITEM IS BEING SOLD FROM MY INVENTORY AS AN OVERSTOCK ITEM. WATCH FOR MANY MORE TO BE LISTED OF VARIOUS SIZES AND BORES. PLEASE ASK ANY QUESTIONS BEFORE PURCHASING PAY PAL ONLY PLEASE:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-146ba667440-0x119-
|
|
|
SECO 2.00" Indexable 45° Face Milling Cutter w/ Inserts (R220.13-02.00-12)
SECO Indexable 45° Face Milling Cutter(R220.13-02.00-12) Cutting Diameter(Dc) 1.97" Arbor Hole Diameter: 0.75" Depth of Cut: 0.240" Height: 1.89" Number of Flutes: 4 Insert Style: SEKN/SEKR 1203 AFTN SEKN/SEKR 42 AFTN This mill is in good condition and comes with sharp inserts shown. Will ship out one day after receipt of payment.
|
|
|
LOT OF 12 ASSORTED MILLING CUTTER & REAMER BIT.PLUS.. USED ! USA TOOLS
PLEASE READ TERMS BELOW BEFORE BIDDING! UP FOR SALE ARE: LOT OF 12 ASSORTED MILLING CUTTER& REAMER BIT PLUS ONE MORSE TAPER SLEEVE-MT 2-3? SOME SPECIAL CUTTER. MOST OF THEM MADE IN USA. SOME RUST. USED OR NOT, SALE AS IS! START LOW PRICE! LONGEST: OVERALL 12" ALL PICTURES SHOWN FOR DETAILS.PLEASE TAKE LOOK IT BEFORE BID! ALWAYS CHECK FOR REVISIONS TO DESCRIPTION
|
|
|
ISCAR MODEL SDN D5.0-0.50-12-10 INDEXABLE MILLING CUTTER 5" DIAMETER X 1-1/2" BO
Iscar Indexable Milling Cutter Staggered Tooth Model SDN D5.0-0.50-12-10 Measures 5" x 1/2" Thickness 12 Station 1-1/2" Bore Includes Carbide Inserts Pictured- NOTE. Missing Many No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. ... moreI f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
SECO 4.00" Indexable Face Milling Cutter (R220.33-04.00-12) Loc: P2-5
This is a SECO Indexable Face Mill/Cutter. Model R220.33-04.00-12. It has been used and needs the screws that holds the inserts but is otherwise is in pretty good condition. Shipping: $15.00 LOC: P2-5
|
|
|
SECO R220.59 Milling Cutter 100mm 1000 34-12.8
SECO R220.59 100mm Milling Cutter 100mm x 16 StationsFeatures-Mfg. SecoStations: 16Effective Diameter: 100mmHeight: 33mmThru-Hole: 25mmPilot Diameter: 36mmPart: R220.59 RE 1000 34-12.8Very Well MaintainedMade in France
|
|
|
12" Helical Milling Cutter
This is a vintage 12" width x 2-3/4" OD used 6-flute helical planer cutter. Bearing shaft end is 1.750" OD x 3" in length and the drive end is 1.250" OD x 2-5/16" in length with flats for setscrew. It was made by Go& Go Company in Detroit Mi. The numbers are VS.11857-1-T-1. OP# 70, 86746H.S.J.J. I noticed(1) chip place(as photos show) and(2) small nicks. It could use a sharpening but will cut as it is. It weights 19 LBS. I ship to the Continental US only Please contact me if you have a question Thank you for looking
|
|
|
Thread Milling Cutter, 12 Pitch 60 Degrees
Thread Milling Cutter. 12 Pitch, 60 Degrees! Thanks. Brian.
|
|
|
SECO 3.00" Indexable 45° Face Milling Cutter w/ Inserts (R 220 13 03 00 12)
this is a nice condition Seco Indexable 45deg face mill with 10 Seco cutter inserts. 4 in box 6 in face mill. cutters do not look like they have been used. 6 flute 1" through hole 3" face
|
|
 |