|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States 2AXIS DRO 3AXIS DRO 2AXIS DRO LCD SCREEN 3AXIS DRO LCD SCREEN. Min resolution of DRO angle :0.0001/pulse. 1pc DRO Or 1set Linear Scales(The size you can ... morechoose). Readout input signal: TTL square wave.
Buy It Now
$27.99 Shipping Condition: Used Location: Chatsworth, United States Table handles for Bridgeport type milling machines. It is a set of 10 handles for one price. One of then handles is missing a knob.
Buy It Now
$12.00 Shipping Condition: New Location: Eastlake, United States GIB for KNEE MILLS. SADDLE to KNEE GIB, Y-AXES. NEW SADDLE to KNEE GIB. NEED PARTS FOR YOUR BRIDGEPORT?. (BRIDGEPORT TYPE). BRIDGEPORT PN: 2060124.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a breeze. Equipped with Gleason spiral ... morebevel gears, our milling machine power feed ensures a stable transmission ratio, low noise output, high transmission efficiency, and excellent load-bearing capacity.
Buy It Now
$17.15 Shipping Condition: New Location: Eastlake, United States GIB for KNEE MILLS. TABLE to SADDLE GIB, X-AXES. NEW TABLE to SADDLE GIB. NEED PARTS FOR YOUR BRIDGEPORT?. (BRIDGEPORT TYPE). BRIDGEPORT PN: 2060117.
Buy It Now
Free Shipping Condition: New Location: Broadview Heights, United States (FINE FEED HANDWHEEL. ADAPT TO A BRIDGEPORT MILL). 1/2" BORE > 4 7/8" OD. ALL PLASTIC. NOT FOR THE.
Buy It Now
Free Shipping Condition: New Location: Broadview Heights, United States QUICK QUILL STOP. EASY AND RAPID QUILL DEPTH SETTING. FITTING ALL BRIDGEPORT OR BRIDGEPORT-TYPE MILLS WITH 1/2"-20 THREAD.
Buy It Now
$9.00 Shipping Condition: New Location: Lakeside, United States On the machine or to another mill. Don’t bolt it! Move it to anywhere. Note: collets are not included. Made in the USA.
Buy It Now
$10.40 Shipping Condition: New Location: Ontario, United States Bando Synchronous Timing Belt 225L x 25mm Width. For Bridgeport-type Head Variable speed Milling Machine.
Buy It Now
$18.80 Shipping Condition: New Location: Broadview Heights, United States R8 TO MORSE TAPER ADAPTORS. WITH NO. 1, 2 & 3 DRIFT KEYS. ONE SET = ONE LOW PRICE. YOU GET NO. 2 & NO. 3 ADAPTORS.
Buy It Now
Free Shipping Condition: New Location: United States 1 x Power Feed for Milling Machine. 1 x Bevel Gear. Max Torque: 450 in-lb. Gross Weight: 16.5 lbs. Material: X-Axis power feed is made of aluminuml. Max ... moreFeed Rate: 650 mm/min. Rotate Speed: 0-200 RPM.
Buy It Now
Free Shipping Condition: New Location: United States
Buy It Now
$7.60 Shipping Condition: New Location: Ontario, United States These are top notch quality and ready to install to any 3/8" x 16 threaded handwheel or crank handle. B - 3/8" x 16 Thread Length - 0.51" (13 mm). C - ... moreFixed Handle Base Length - 0.47" (12 mm). A - Revolving Handle Length – 2.95" (75 mm).
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States 2AXIS DRO 3AXIS DRO 2AXIS DRO LCD SCREEN 3AXIS DRO LCD SCREEN. Min resolution of DRO angle :0.0001/pulse. 1pc DRO Or 1pc Linear Scale (Travel Length 100/150/200/250.1000MM). ... moreReadout input signal: TTL square wave.
Buy It Now
Free Shipping Condition: Used Location: Flourtown, United States Here is a 2J Head Drawbar Variable Speed Milling Machine - Bridgeport Type USA Black Oxide finish. about 26" overall. 18" or so without the end. Decent ... morecondition. Threads look good. O-ring and collar are fine.
Buy It Now
Free Shipping Condition: Used Location: Flourtown, United States About 26" overall. 18" or so without the handle. Decent condition. Threads look good. O-ring and collar are fine. Ready to work with no issues. What you ... moresee is what you get. Not Happy?.
Buy It Now
$5.25 Shipping Condition: New Location: Ontario, United States Milling Machine Part - Quill Lock Bolt & Handle Assembly (Silver). Quill Lock Handle & Bolt Assembly. Fits most importing mills from Taiwan or China. ... moreHandle in silver color and screw in black color.
Buy It Now
Condition: Used Location: Stone Mountain, United States 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. Milling Machines. Pneumatic Indexing ... moreTable, Brown & Sharpe No. 22 5″ Vise. Bridgeport Series I 9" x 48" Variable Speed Milling Machine w/ Newall DP700 DRO.
Buy It Now
Free Shipping Condition: New Location: United States
Buy It Now
$9.95 Shipping Condition: New Location: Ontario, United States Here's a quick fix. The width of the clock spring is 25mm. The pictures shown may be different from actual product images.
Buy It Now
$20.00 Shipping Condition: New Location: Taylorsville, United States HI YOU ARE LOOKING AT A POWER DRAW BAR FOR A VARIABLE SPEED R8 COLLET IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET. MSC, ATRUMP, WT TOOL, ACRA, ACER, ... moreCHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. YOU JUST PULL DOWN ON THE HANDLE AND MOVE IT LEFT OR RIGHT TO LOOSEN OR TIGHTEN THE DRAW BAR, LET GO OF THE HANDLE AND IT RETURNS TO TOP AUTOMATIC. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE AND TO DAMPEN ANY VIBRATION FROM THE HEAD. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. HANDLE FULLY ADJUSTABLE TO FIT YOUR PREFERENCE AND TO TAKE UP ANY WEAR THAT MIGHT HAPPEN OVER TIME. USES ORIGINAL DRAWBAR SO NO SPECIAL DRAW BAR TO BUY. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. IF YOUR COLLET STICKS IN THE SPINDLE RETURN THE IMPACT TO THE TOP AND BRING IT DOWN AND STRIKE THE DRAWBAR AS YOU WOULD WITH A HAMMER. THERE IS ALSO A REGULATOR BUILT IN THE IMPACT WRENCH TO KEEP FROM OVER TIGHTENING THE DRAWBAR. WE DESIGNED THIS POWER DRAW BAR IN OUR SHOP AND HAVE SOLD OVER 400 UNITS WITH GREAT RESULTS PLEASE CHECK OUR EBAY FEEDBACK ALL OF THE MAIN BODY IS MADE AND ASSEMBLED IN OUR SHOP HERE AT M&T MACHINE, TAYLORSVILLE N.C. 28681 USA. WE DEVELOPED THIS POWER DRAWBAR IN OUR SHOP AND HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. BEWARE THERE ARE INFERIOR COPIES OUT THERE SO PLEASE GET THE ORIGINAL. WE OFFER A FULL 30 DAY RETURN POLICY IF NOT FULLY PLEASED WITH THE TOOL RETURN IT FOR A FULL REFUND. ANY QUESTIONS CALL 828-632-1500 HOME. PLEASE CHECK OUR EBAY FEEDBACK AND PLEASE LOOK AT OUR EBAY STORE WE HAVE OTHER MACHINE SHOP TOOLS FOR SALE.AS WELL AS POWER DRAWBARS FOR STEP PULLEY HEADS THANK YOU VERY MUCH FOR LOOKING TODD AND S
Buy It Now
$24.99 Shipping Condition: New Location: Pittsburgh, United States Z Axis (Knee Travel Up and Down) Power Feed Kit for Precision Matthews, Bridgeport, and Similar Knee Type Milling Machines. (See notes about the Bridgeport ... moremachines below). This thread needs to be 3/4-16 for this feed to work.
Buy It Now
Free Shipping Condition: New Location: United States 【WIDE APPLICATION】 Designed to fit milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and more, this power feed is ... moreversatile. Whether you are a novice or a skilled operator, installing this power feed is a breeze.
Buy It Now
$178.96 Shipping Condition: New Location: Ontario, United States 6" Milling Machine Riser Block. For Bridgeport-Type Knee Mills.
Buy It Now
Free Shipping Condition: New Location: United States 【WIDE APPLICATION】 Designed to fit milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and more, this power feed is ... moreversatile. Whether you are a novice or a skilled operator, installing this power feed is a breeze.
Buy It Now
$20.00 Shipping Condition: New Location: Cochran, United States 2J Head - Variable Speed Drawbar. For Bridgeport and Bridgeport Type Mills. Thread Length: 1-3/4".
Buy It Now
$4.00 Shipping Condition: New Location: Chino, United States NEW! RAM ADAPTOR OEM 2060129 TAIWANESE CASTING WILL FIT MOST ASIAN IMPORT MILLS AND THE AMERICAN MADE BRIDGEPORT SEE PICTURE OF BASE FOR GEAR HOLE PATTERNS ... moreAMERICAN MADE BRIDGEPORT: HAS(2) 1/4-20 HOLES AND(1) HOLE FOR ROLL PIN- EACH HOLE DESIGNATED BY STEEL STAMPED"B" ASIAN IMPORT MILLS: HAS(2) METRIC HOLES AND(1) HOLE FOR ROLL PIN- THESE HOLES HAVE NO DESIGNATION THANKS FOR LOOKING AND DON'T FORGET THE OTHER QUALITY BRIDGEPORT PRODUCTS IN THE STORE. SUCH AS REPAIR KITS, REPLACEMENT PULLEYS AND CLOCK SPRINGS PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email for further information. Shipping and Handling Shipping weight: 40lbs Buyer pays the shipping& handling charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$39.32 Shipping Condition: New Location: Huntington Beach, United States Z-axis power feed for Bridgeport type milling machines. Motor: 110V, 50/60HZ. RPM: 4-180 Limit switch for sensitive stop. Reversible and auto shut-off ... moreat end of cut. Our Part # ALL-30004.
Buy It Now
$24.99 Shipping Condition: New Location: Pittsburgh, United States Y Axis (Front/Back Table Travel) Power Feed Kit for Precision Matthews, Bridgeport, and Similar Knee Type Milling Machines. Includes Everything Needed ... moreto Mount on MOST Knee Type Mills (Our PM Mills, And Most All Bridgeport Type Mills with a 5/8″ Shaft).
Buy It Now
$37.24 Shipping Condition: New Location: Huntington Beach, United States Y-axis power feed for Bridgeport type milling machines. Motor: 110V, 50/60HZ. RPM: 4-180 Limit switch for sensitive stop. Reversible and auto shut-off ... moreat end of cut. Our Part # ALL-30002.
Buy It Now
Free Shipping Condition: New Location: United States 1 x Power Feed for Milling Machine. 1 x Bevel Gear. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Rotate Speed: 0-200 RPM. 1 x Dial Nut. 1 x Locking ... moreNut. 8 x Adjustable Pad.
Buy It Now
$5.25 Shipping Condition: New Location: Ontario, United States Milling Machine Part - Quill Lock Bolt & Handle Assembly (Silver). Quill Lock Handle & Bolt Assembly. Fits most importing mills from Taiwan or China. ... moreHandle in silver color and screw in black color.
Buy It Now
Free Shipping Condition: New Location: Pittsburgh, United States As long as it is the Bridgeport Type Machine, it should fit. X Axis (Left/Right Table Travel) Power Feed Kit for Precision Matthews, Bridgeport, and Similar ... moreKnee Type Milling Machines. These are very high quality units, made in Taiwan, Not China.
Buy It Now
$152.79 Shipping Condition: New Location: Ontario, United States Milling Machine Riser Block 4". For Bridgeport-Type Knee Mills.
Buy It Now
Free Shipping Condition: Used Location: Pennsburg, United States RARE Bridgeport Quill Master Type MA Multi Angle Milling Attachment Free Ship. Good used shape, is in good working condition. Shows some normal usage ... morewear, has some paint loss as seen. Comes as seen in photos free shipping.Tote 8
Buy It Now
Condition: Seller refurbished Location: Watertown, United States Remanufactured Bridgeport Milling Machines with 48" Table. 42" Table also available price adjusted accordingly. When you buy from us your buying ... morefrom knowledgeable people with years of experience in the Manufacturing, Engineering& Tool and Die Trades, your dealing with hands on guys that use the machines they sell on a daily basis. Not just a salesman) Make: X-Axis Travel Bed: Model: Y-Axis Travel Bed: MPN: Z-Axis Travel Bed: Type: Highest Spindle Speed(RPM) For more than 60 years. The Bridgeport Series I Standard Mill- the original, all-purpose mill- has been the"real thing" in milling, drilling, and boring for metalworking shops throughout the world. Today, the Series I Standard continues to fulfill the industry's need for an accurate, reliable, and versatile mill. The Series I Standard features an innovative airflow cooling design that uses no external fans to prolong bearing life and prevent expansion from heat build-up. A full range of accessories are available. Including optional chrome-plated ways and gibs to ensure that the machine will last a lifetime. Range Table travel(X-Axis) 36" 914 mm) Saddle Travel(Y-Axis) 12" 305 mm) Quill Travel: 5" 127 mm) Knee Travel(Z-Axis) 16" 406 mm) Ram Travel: 12" 305 mm) Throat Distance(Min. 18.75" 476 mm) Throat Distance(Max. 6.75" 171 mm) WORKTABLE Standard: 42 x 9" 1245 x 299 mm) T Slot center distance: 3@ 2.5" 64 mm) centers T-Slot Size: 0.625" 16 mm) Height Above Floor(Max. 47.25" 1200 mm) Weight of Workpiece(Max. 750 lb(340 kg) Spindle(2J Head) Power Rating 30 min. Duty Cycle: 3 hp(2.2 kW) Power Rating Continuous: 2 hp(1.5 kW) Tooling: R-8 Collets Drilling Capacity Power Quill Feed 3: 3/4" Dia. 19 mm) Manual Drilling Capacity: 3/4" 19 mm) Mild Steel Boring Range: 6" 152 mm) Mild Steel Spindle Diameter: 1.875 in(48 mm) Quill Diameter: 3.375" 86 mm) Speed Range High(Infinitely Variable) 500-4200 rpm Low: 60- 500 rpm Power Quill Feed: 0.0015"rev(0.038 mm) Manual
Buy It Now
Condition: Used Location: Pomona, United States X Axis Power Feed. Number Of Spindle Speeds: Variable to 4,200 RPM. One Shot Lube. EQUIPPED WITH Electrics: 220V, 3-Phase, 60Hz. Main Motor: 2 HP. Pomona ... moreCA 91768. Spindle Speeds: 80 to 4,200 RPM.
Buy It Now
$15.99 Shipping Condition: For parts or not working Location: Temecula, United States Item powers on, and everything turns as it should. Forward and reverse work.Gears look good with no broken teeth. Limit switch is stiff, and only works ... morein one direction. This item is noisier than it should be probably, but I know little about it. I did not test the black button by the lever.
Buy It Now
Free Shipping Condition: New Location: Seattle, United States 1 x Power Feed Z-axis for Milling Machine. Max Torque: 450 in-lb. Rotate Speed: 0-200 RPM. 1 x Copper Gear & 1 x Flat Key Pin. Max Feed Rate: 650 mm/min. ... more1 x Connecting Rod & 1 x Flange. 2 x Limit Block.
Buy It Now
$22.00 Shipping Condition: Seller refurbished Location: Bedford, United States VINTAGE BRIDGEPORT QUILL MASTER TYPE J A DISASSEMBLED AND GREASED WORKS WELL.(B35-51)
Buy It Now
$5.95 Shipping Condition: New Location: Cochran, United States Mill Quill Stop for Milling Machines. Fast On-Off clip action. Easy and rapid quill depth setting. Fits all Bridgeport type mills or any 1/2"-20 stop ... morerod. For limited production, semi- production and quantity production.
Buy It Now
$5.25 Shipping Condition: New Location: Ontario, United States Milling Machine Part - Quill Lock Bolt & Handle Assembly (Black). Quill Lock Handle & Bolt Assembly. Fits most importing mills from Taiwan or China. M8 ... morex 1.25 threads. Length of screw shaft: 80mm. Handle in black color and screw in black color.
Buy It Now
$28.00 Shipping Condition: New Location: Ontario, United States Fit for R8 collets. Draw Bar for Bridgeport Type Milling Machine.
Buy It Now
$28.60 Shipping Condition: New Location: Broadview Heights, United States TAIWANESE MILLING MACHINES. ADJUSTABLE MOTOR VARIABLE DISC FOR IMPORT MILLS.
Buy It Now
$18.00 Shipping Condition: New Location: Eastlake, United States NEED PARTS FOR YOUR BRIDGEPORT?. Servo Type 150 Y-AXIS Power Feed. Peak Torque (half-wave series motor): To 150 in-lb. Helical gearing and toque limiting ... morefriction safety clutch with new and improved gear.
Buy It Now
$40.00 Shipping Condition: New – Open box Location: Palm Springs, United States Limit switch and all required parts included, fits any Bridgeport or Bridgeport type x-axis milling machine.
Buy It Now
Condition: Used Location: Pomona, United States Swiveling 6" Mill Vise. Belt Change Head. Number Of Spindle Speeds: 8. Pomona CA 91768. Spindle Speeds: 80 to 2,720 RPM. Spindle Type: R8.
Buy It Now
Condition: New – Open box Location: Watertown, United States Bridgeport X-Axis Travel Bed Bridgeport Z-Axis Travel Bed Throat Distance (Min.). : 18.75" (476 mm). Throat Distance (Max.). : 6.75" (171 mm). 2 HP Vari ... moreSpeed Head. Series 1 Y-Axis Travel Bed.
Buy It Now
Free Shipping Condition: New Location: United States 1 x Power Feed for Milling Machine. 1 x Bevel Gear. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Rotate Speed: 0-200 RPM. 1 x Dial Nut. 1 x Locking ... moreNut. 8 x Adjustable Pad.
Buy It Now
$15.60 Shipping Condition: New Location: Cochran, United States 1J Head - Step Pulley Drawbar. For Bridgeport and Bridgeport Type Mills.
Buy It Now
Free Shipping Condition: New Location: Melville, United States Value Collection Mill Stop Bridgeport Type Mills
Buy It Now
$6.75 Shipping Condition: New Location: Broadview Heights, United States OEM NUMBER A2499. FOR THE SERVO POWER FEED TYPE 70, 80, 90, 100, 140 AND 150. HEX SEAL BOOT FOR RAPID SWITCH PLUNGER ASSEMBLY.
Buy It Now
$20.00 Shipping Condition: New Location: Taylorsville, United States HI YOU ARE LOOKING AT A PNUEMATIC IMPACT AIR OPERATED POWER DRAWBAR FOR A STEP PULLEY HEAD IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET. MSC, ATRUMP, ... moreWT TOOL, CHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. YOU JUST PULL DOWN ON THE HANDLE AND MOVE IT LEFT OR RIGHT TO LOOSEN OR TIGHTEN THE DRAW BAR, LET GO OF THE HANDLE AND IT RETURNS TO TOP AUTOMATIC. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. MAY NEED A LONGER DRAWBAR OR MODIFICATION TO YOUR EXISTING DRAWBAR A LONGER DRAWBAR CAN BE PURCHASED AT ALMOST ANY MACHINE SHOP TOOL SUPPLY STORE. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. ALL PARTS MADE IN OUR SHOP HERE AT M&T MACHINE, TAYLORSVILLE N.C. 28681 USA EXCEPT THE IMPACT WRENCH AND FASTENERS. WE DEVELOPED THIS POWER DRAWBAR IN OUR SHOP BEWARE THERE ARE INFERIOR COPIES OUT THERE BUT GET THE ORIGINAL HERE. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. WE HAVE OVER 1000 UNITS SOLD WITH GREAT RESULTS. THEIR ARE COPIES OUT THERE PLEASE SUPPORT OUR TIME SPENT ON RESEARCH AND DEVELOPMENT YOU WILL NOT REGRET IT{REQUIRES YOU DRILL THREE 1/4-20 HOLES IN THE TOP OF YOUR MILLING HEAD TO MOUNT THE POWER DRAWBAR} INSTALLATION INSTRUCTIONS INCLUDED. PLEASE CHECK OUR EBAY FEEDBACK ANY QUESTIONS CALL 828-632-1500. PLEASE LOOK AT OUR EBAY STORE WE HAVE OTHER TIME SAVING MACHINE SHOP TOOLS AS WELL AS A POWER DRAWBAR FOR VARIABLE SPEED HEADS FOR SALE. THANK YOU VERY MUCH FOR LOOKING TODD AND SHANNON
Buy It Now
$4.90 Shipping Condition: New Location: China 3# 4# Milling Machine Universal. Suitable for most milling machines. Due to the difference between different monitors, the picture may not reflect the ... moreactual color of the item. pls make sure you do not mind before you buy.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Product description: ★This is a high-quality three-phase motor milling switch for milling machine parts. ★Machine switch, beautiful appearance, three-dimensional ... moresurface. ★Long service life of the switch, this product is suitable for AC 50-60HZ; voltage is 690V and below or DC 440V and below. ★With intelligent circuit matching and advanced technology, it is suitable for most milling machines and machine tools. Features: Type: Three-stage switch Material: Plastic + Metal Product size (see drawings for details): 64*64*61mm Gross weight: 0.2KG Net weight: 0.1kg Packing size: 12*7*6CM The package includes: 1X switch note: Due to manual measurement, please allow a difference of 1-3cm.
Buy It Now
Condition: Used Location: Bradenton, United States Milling Machine. BRIDGEPORT SERIES 1 Vertical Milling Machine #GMT-3478 Reference # GMT-3478 Model # Series 1 Serial # 440260188X Table working surface- ... more9” x 42” Number of t-slots- 3 Ranges: Longitudinal (X)- 26” Cross (Y)- 11.5” Vertical, knee – 15” Quill (Z)- 5” Maximum/Minimum distance, spindle nose to table- 22-1/4"/ 6-1/2" Maximum/Minimum distance, centerline of spindle to face of column - 18-3/4"/ 6-3/4" Maximum uniform table load- 300 Lbs.
Buy It Now
Free Shipping Condition: New Location: China Can fit Bridgeport, Acer, and Taiwanese all machines. Size : 400mm x 600mm.
Buy It Now
$20.00 Shipping Condition: New Location: Taylorsville, United States HI YOU ARE LOOKING AT A POWER DRAW BAR FOR A VARIABLE SPEED R8 COLLET IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET. MSC, ATRUMP, WT TOOL, ACRA, ACER, ... moreCHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. YOU JUST PULL DOWN ON THE HANDLE AND MOVE IT LEFT OR RIGHT TO LOOSEN OR TIGHTEN THE DRAW BAR, LET GO OF THE HANDLE AND IT RETURNS TO TOP AUTOMATIC. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE AND TO DAMPEN ANY VIBRATION FROM THE HEAD. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. HANDLE FULLY ADJUSTABLE TO FIT YOUR PREFERENCE AND TO TAKE UP ANY WEAR THAT MAY TAKE PLACE OVER TIME. USES ORIGINAL DRAWBAR SO NO SPECIAL DRAW BAR TO BUY. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. IF YOUR COLLET STICKS IN THE SPINDLE RETURN THE IMPACT TO THE TOP AND BRING IT DOWN AND STRIKE THE DRAWBAR AS YOU WOULD WITH A HAMMER THERE IS ALSO A REGULATOR BUILT IN THE IMPACT WRENCH TO KEEP FROM OVER TIGHTENING THE DRAWBAR. WE DESIGNED THIS POWER DRAW BAR IN OUR SHOP AND HAVE SOLD OVER 400 UNITS WITH GREAT RESULTS THERE ARE COPIES OUT THERE SO BEWARE GET THE ORIGINAL. ALL OF THE MAIN BODY IS MADE AND ASSEMBLED IN OUR SHOP HERE AT M&T MACHINE, TAYLORSVILLE N.C. 28681 USA. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. THERE ARE COPIES OUT THERE BEWARE PLEASE SUPPORT OUR RESEARCH AND DEVELOPMENT WE OFFER A FULL 30 DAY FULL REFUND IF YOU ARE NOT FULLY PLEASED WITH THIS ITEM. ANY QUESTIONS CALL 828-632-1500 HOME. PLEASE CHECK OUR EBAY FEEDBACK AND PLEASE LOOK AT OUR EBAY STORE WE HAVE OTHER TIME AND LABOR SAVING MACHINE SHOP TOOLS FOR SALE AS WELL AS POWER DRAWBARS FOR STEP PULLEY HEADS THANK YOU VERY MUCH FOR LOOKING TODD AND SHANNON
Buy It Now
$44.87 Shipping Condition: New Location: Huntington Beach, United States X-axis power feed for Bridgeport type milling machines. Motor: 110V, 50/60HZ. RPM: 4-180 Limit switch for sensitive stop. Reversible and auto shut-off ... moreat end of cut. Our Part # ALL-30000.
Buy It Now
$149.99 Shipping Condition: New Location: China BRIDGEPORT Type Mill Part, J Head Milling Machine RAM Adapter M1187. Model ： M1187. Suitable for most milling machines.
|
|
|
|
Bridgeport R8 Type S Collet Chuck 7/16 UNF With A 1" Collet - 99p No Reserve !!
Bridgeport R8 Type S Collet Chuck 7/16 UNF With a 1" Collet R8 7/16 UNF With a 1" Collet Sold as Seen- No Returns No Reserve VAT is included in the price 2547 Contact Information: Findurstuff Limited Unit 17 Shrub Hill Industrial Estate Cromwell Street Worcester Worcestershire WR4 9EW Office- 01905 26426 Mobile- 07967 201942 E-mail- sales@findurstuff.com Opening Times: We are open Monday to Friday 9am-5pm. However you MUST call before coming over, as there is not always someone on site. Payment and Collection: Payment is expected within 3 days of the auction close. Unless prior arrangements have been made. Payment can be made by Cheque, Paypal, Bank Transfer, Cash on Collection or Credit Card(Please call the office if you wish to make a Credit Crad Payment) You are welcome to collect any item, but at least 24 hours must be given, ... moreas not all goods advertised are on this site. Collection is to be done within 14 days, unless prior arrangements have been made. VAT Invoices: A full VAT invoice is supplied with all purchases. Our VAT number is: GB884 3483 88. If you require any further information or would like to speak to one of us. Please do not hesitate to call or e-mail. If there is no reply, please leave a message and one of us will come back to you shortly. Thank you Verity and James Aston Findurstuff Limited sales@findurstuff.com
|
|
|
Bridgeport quillmaster TYPE JA
Here is a Bridgeport Quillmaster type JA as shown. This unit works well. Shaft is in nice shape, no burrs or other damage, collet seat is clean the rotation is smooth and the gears feel good. Ships to USA only. Posted with
|
|
|
X-AXIS TABLE HANDLE BEARING CAPS FOR BRIDGEPORT TYPE MILLING MACHINES
This is a pair of end cap bearing supports for the X-axis of Bridgeport type milling machines. These will need new bearings as the old ones are incomplete. But the castings(they are cast iron not aluminum) are in very good shape. Get'em while you can! Super fast FREE Priority Mail shipping included! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending ... moreupon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
90º BRIDGEPORT TYPE R-8 SPINDLE MILLING HEAD
I don"t think this has ever been used.
|
|
|
Right angle R8 Milling machine attachment for a Bridgeport type knee mill.
This used R8 Right Angle Attachment from H& R is in good shape and in good working condition. It doesn't appear to have seen much use. In the box weight: 23 lbs.
|
|
|
6 inch riser for Bridgeport type vertical mill
6 inch riser for Bridgeport type vertical mill. Needs cleaning& paint. Contact me for more questions or pictures. Located in Berrien Springs. Southwest corner of Michigan zip 49103 if you would like to pickup. I leave Feedback at time of shipping to notify buyer of shipment. As this is the way it should be– sellers that ask buyers to leave feedback before they will reciprocate are extorting feedback. Don’t leave feedback for them! Questions? Email me! Thanks for looking. jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13eb333cbb9-0xf4-
|
|
|
SupermaxYC-1-1/2-VA Ram Vertical Turret Milling Machine DRO (Bridgeport type)
Supermax Model YC-1-1/2-VA Vertical Turret Milling Machine-Inv#8022 You are bidding on a Supermax Model YC-1-1/2-VA Vertical Turret Milling Machine-Inv#8022 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider bidding on our machinery and or equipment. We have done our best to provide as much information and as many details as possible so you will be better able to bid with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery and equipment is taken direct from service/operation ... moreas it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We will always be willing and happy to try to answer every question a customer might have to the best of our ability, however we do recommend that you that you ask all your questions as early as possible giving us time to answer before the auction ends. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N: 80-075496 Voltage:220-440V/3PH/60HZ Built 1980 Motor: 2 HP Speeds: 80- 2720 RPM(8) Tab
|
|
|
Bridgeport Model BR2J, 1-1/2 HP Ram Type Vertical Turret Milling Machine
Bridgeport Model BR2J. 1-1/2 HP Ram Type Vertical Turret Milling Machine-Inv#7106 You are bidding on a Bridgeport Model BR2J. 1-1/2 HP Ram Type Vertical Turret Milling Machine-Inv#7106 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider bidding on our machinery and or equipment. We have done our best to provide as much information and as many details as possible so you will be better able to bid with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery and equipment ... moreis taken direct from service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We will always be willing and happy to try to answer every question a customer might have to the best of our ability, however we do recommend that you that you ask all your questions as early as possible giving us time to answer before the auction ends. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N: 12BR 174730 Voltage: 220-440V/3PH/60HZ Built 1976 Table si
|
|
|
Sharp First Prototrak LMV-50 CNC Ram Type Vertical Turret Milling (Bridgeport)
Sharp First Prototrak Model LMV-50 CNC Ram Type Vertical Turret Milling Machine-Inv#7159 You are bidding on a Sharp First Prototrak Model LMV-50 CNC Ram Type Vertical Turret Milling Machine-Inv#7159 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider bidding on our machinery and or equipment. We have done our best to provide as much information and as many details as possible so you will be better able to bid with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery ... moreand equipment is taken direct from service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We will always be willing and happy to try to answer every question a customer might have to the best of our ability, however we do recommend that you that you ask all your questions as early as possible giving us time to answer before the auction ends. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N: 76030441 Year of MFG: 1987 Voltage: 220. 3 p
|
|
|
USED HORIZONTAL MILLING ATTACHMENT FITS BRIDGEPORT TYPE MILLS R8
UP FOR SALE IS THIS USED HORIZONTAL MILLING ATTACHMENT FITS BRIDGEPORT TYPE MILLS R8. THIS IS A HORIZONTAL MILLING ATTACHMENT. THIS FITS BRIDGEPORT TYPE MILLS. I HAVE ONLY USED THIS ONCE AND IT IS IN GREAT SHAPE. THIS CAN BE USED WITH OR WITHOUT THE ARBOR SUPPORT. COMES WITH R8 SLITTING SAW. NEEDS SOME CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S1625
|
|
|
CNC MILLING MACHINE BRIDGEPORT TYPE KNEE MILL 9 x 42 TABLE
ALLIANT 3 HP KNEE MILL WITH BALLSCREWS ON X AND Y AXIS. DC SERVOS WITH 2500 CPR US DIGITAL ENCODERS ON THE X AND Y AXIS. 3 PHASE INCLUDES A 7 HP ROTARY PHASE CONVERTER. SOME TOOLING R8 COLLETS, R8 1/2 INCH END MILL HOLDER, DRILL CHUCK, HANDWHEELS ON BOTH X AND Y AXIS. HAS SOME NOISE IN THE VARIABLE SPEED PULLEYS.
|
|
|
Milling Machine swivel Vise 8" For Bridgeport Type Mill
USED. GOOD CONDITION MILLING MACHINE swivel VISE WITH 8" WIDE JAWS. opens 8" with the jaw pads in place, 9-1/2" without. BUYER PAYS UPS GROUND SHIPPING ON 135LBS FROM 30527. 2008-42#3 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND ... moreTHE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All i
|
|
|
Bridgeport Type Verticle Mill Trav A Dial Set
Used Verticle Mill Trav A Dial Set- BR-1 bracket with 2 dial units. I have had this for years but never installed on a machine. Dials seem to function correctly. I only have what is shown in the pictures if any other hardware is necessary to install you will need to locate yourself. Only ship to United States.
|
|
|
Mitutoyo 053906B Vertical Quill Kit for Bridgeport Type Mills
Mitutoyo Vertical Quill Kit Model 053906B Free Shipping USPS Priority Mail Easy to read.0005"0.01mm resolution LCD Push button controls for inch/mm. Zero-Set and On/Off Powered by a single SR-44 Battery which lasts about 1 year with normal use SPC output for data transmission to data processors or a remote display Supplied with mounting brackets Location: AK3)
|
|
|
YCI Supermax 9" x 49" (Bridgeport Type) Vertical Mill No. YCM-16VS
YCI Supermax 9" x 49" Bridgeport Type) Vertical Mill No. YCM-16VS YCI Supermax Ram Type Vertical Mill(Bridgeport-Type) Ref.78-480 Model No. YCM-16VS Serial No. 9103029 New 1990 This machine is very similar in design to the Bridgeport vertical mill. Table Size: 9" x 49" Longitudinal Table Travel: 34" Saddle Cross Travel: 12" Knee Vertical Travel: 16" Quill Travel: 5" Maximum Distance Spindle Nose to Table Top: 18-3/8" Spindle Speeds. Variable: 60- 4200 RPM Power Quill Feed Rates(3) 005. 0031, 0015 In/Rev. Spindle Nose Taper: R8 Overall Dimensions: 70" x 68" x 84" High Equipped With: Pathfinder 2-Axis DRO. 0.0005" Resolution Servo Type 150 Long. Power Feed Unit Hard Box Ways One Shot Lube 3-HP Variable Speed Milling Head 220/440.3/60 Approximate Net Weight: 2.200 Lbs. All Items ... moreSubject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund
|
|
|
Chevalier MX2 Prototrak Ram Type Vertical Turret Milling (Bridgeport)
Chevalier Cnc Milling machine has the 9 x 48 inch table This one is in very nice shape it does have the variable speed plastic bearings that will need replaced. We may get to it and if we do we will adjust the price. the control is the MX2 which has the ctr screen for those who may not know the controls this one is many times better than a plus controller. Thank you for your Business! We can ship if needed! God Bless!
|
|
|
TRAV A DIAL MOUNTING FOR BRIDGEPORT TYPE MILL BR-1 E-23
TRAV A DIAL MOUNTING BRACKET FOR BRIDGEPORT TYPE MILL BR-1 MOUNTING BRACKET NUMBERS ON PART: 11279 C815 USED IN GOOD PHYSICAL CONDITION PLEASE SEE OUR PICTURES EVEREST R&D CORP. 16542 BURKE LANE HUNTINGTON BEACH. CA 92647 BUSINESS HOURS: 8:30- 3:30 PST IF YOU HAVE ANY QUESTIONS PLEASE CONTACT ME CALL FRED MUHS OR EMAIL 714-842-8622 PLEASE READ THE FOLLOWING IMPORTANT PAYMENT AND SHIPPING INFORMATION*California Sales Tax will apply to all California residents. I also offer Free Local Pick Up. If you order several items I can combine them to save you shipping charges. Please wait for me to combine the items and send you an invoice before you make payment. All P.O. Box addresses can ONLY be shipped and delivered by the Postal system. PayPal is accepted as well as other types of payment. For other types of payment please contact me. Orders ... morewill ship within 1 business days after receipt of payment. Shipping prices are for the lower 48 states. All other buyers should ask for a shipping quote BEFORE buying. Large or heavy items may have additional handling charges. Please contact me if you have any questions. Shipping by first class mail international has no tracking. I can only give you the customs form number and date of shipment. I appreciate payment in a timely manner. If there is a problem please contact me before you leave feedback and I am sure we can resolve the issue. You can make a reasonable offer on any item I have for sale. Please email me your offer if it is not available through eBay. I appreciate your business and if you have any questions on this or any other item please contact me. FRED MUHS PHONE 714-842-8622 OR EMAIL
|
|
|
90º BRIDGEPORT TYPE MILLING HEAD MADE BY EX-CELLO CORP R-8 SPINDLE
90 º BRIDGEPORT TYPE MILLING HEAD MADE BY EX-CELLO CORP R-8 SPINDLE ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3340 THERE IS A $15.00 HANDELING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
Bridgeport Quill Master Type JA w/ Right Angle Attachment (Inv.27081)
Bridgeport Quill Master Type JA with Right Angle Attachment Excellent Condition Loc. 28-N(Inv. 27081) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal ... moreshipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Sharp M2 Prototrak Ram Type Vertical Turret Milling (Bridgeport)
Sharp Cnc Milling machine has the 9 x 48 inch table This one is not in great shape this machine was used. It still has plenty of life in it just not as nice looking as some machine's. It will need some tlc to make it a great machine and it is heavier than most of the knee mill machines. The control is the M2 which has the ctr screen for those who may not know the controls this one is many times better than a plus controller. Thank you for your Business! We can ship if needed! God Bless!
|
|
|
Bridgeport Model CJS8797 Series 1, 2 HP Ram Type Vertical Turret Milling Machine
Bridgeport Model CJS8797 Series 1. 2 HP Ram Type Vertical Turret Milling Machine-Inv#8531-470 You are bidding on a Bridgeport Series 1. 2 HP Ram Type Vertical Turret Milling Machine-DRO, PWR FD TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider our machinery and/ or equipment. We have done our best to provide as much information and as many details as possible so you will able to consider with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery and equipment ... moreis taken direct from service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We are always willing and happy to answer any and every question a customer might have to the best of our ability, so don't hesitate to ask. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N: 416270286W 2HP.415V/3PH/50-60HZ Speeds: 60- 4200 RPM variable Table size: 9" x 42" Table feeds: 12" x 28" Knee feeds. Vertical: 16" Spindle: R-8 Spi
|
|
|
Bridgeport Milling Machine Ram head Type 36″ Table
Bridgeport Milling Machine Ram head Type 36″ Table. 36″ table with Bridgeport vice. Table and head in good condition. 1 horsepower motor. 220/440 Volts 3 Phase. Can be seen running. Some colets. Tools etc included. Seller can load. Price: 2500.00. Location: MA. SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 Ask for Joe
|
|
|
Servo Type 150 X Axis Power Feed for Bridgeport Style Milling Machines
Servo Type 150 Power Feed Used. In good condition Serial Number- 150: 555622
|
|
|
Servo Type 90 Power Feed for Bridgeport Style Milling Machines
servo feed 90 power lamp comes on. Motor will not turn for parts as is
|
|
|
2 Bridgeport Quill Master Type JA Right Angle Attachments
2 Quill Master. Type JA Right Angle Attachments for Bridgeport. 1 used and in good working order and the other 1 for parts. Being sold as is. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14099325234-0xfe-
|
|
|
BRIDGEPORT-TYPE 90 DEGREE HEAD W/HORIZONTAL MILLING ATTACHMENT
ALL 3 PIECES IN GREAT CONDITION AND INCLUDED IN THE PRICE. CRATING& SHIPPING EXTRA CHARGE
|
|
|
Bridgeport type mill R8 shell milling cutter
Used in good condition. Approxamently 3" in diameter shell mill cutter. It uses 1/2" square tool bits for cutters. Includes the R8 x 1" arbor
|
|
|
Bridgeport And Lagun Type Milling Machine 8" Column Riser Block Fits Other Mills
Column Riser Block 8" Tall For Mills Bridgeport and Lagun type mills Outside Dia. 15" Step Dia. 12.5" Will Ship at Buyers Cost 260-418-3873 Posted with
|
|
|
Bridgeport Type Vertical mill made by Metal Master, 9" X 42" table
This is a Bridgeport type machine made by Metal Master. It is 3 hp with variable speed control. 9" X 42" table with power feed on the X axis. It has a Mitutoyo DRO. Machine is in very good condition. Mid to late 90s production. Bought several machines in a package deal, but do not need two mills so selling this one. Buyer must pick machine up or setup shipping themselves. I cannot ship this item myself.
|
|
|
Bridgeport Quill Master, Type JA Swiveling Spindle Speeder, 1.5:1 INV=12543
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Bridgeport Type"J A" Quill Master" Spindle Attachment for Bridgeport Milling Machines. Spindle nose swivels on unit body. Unit body may be swiveled on the machine's spindle- head. Speed increase of 1.5:1(over input speed) I can not test this item. But the spindle turns freely by hand(from either end) NOTE: Please review the photo's: THERE IS A CRACK IN THE UNIT's HOUSING, near the bolt that tightens the attachment to the machine spindle. I am showing it very prominently, so that you can see it and bid accordingly. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of ... morelaws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
|
|
|
Servo Type 150 Power Feed For Parts Or Repair, Bridgeport Mill
Servo power feed 150 x or y axis. The powerfeed does work but housing is broke so you can't switch feed directions. Can be fixed or used as parts. Posted with
|
|
|
BRIDGEPORT Series II Special VERTICAL KNEE TYPE MILLING MACHINE R8 Spindle DRO
BRIDGEPORT Series II Special VERTICAL KNEE TYPE MILLING MACHINE CATALOG SPECIFICATIONS: Table Size: 11" x 58" Table Travel(X-Axis) Manual: 33-1/2" Saddle Travel(Y-Axis) 15" Knee Travel(Z-Avis) 12" Ram Travel: 17" Quill Travel: 5" Throat Distance(Minimum) 6-3/4" Throat Distance(Maximum) 23" Spindle Taper: R8 Spindle Spindle Speeds. Variable: 60- 4200 RPM Spindle Power Feed: 0015" 003" 006" EQUIPPED WITH: 2 HP Spindle Motor. Currently Wired 480 VAC 3 Phase, Motor is 220/440/60/3 capable. Has Anilam Three(3) Axis Digital Readout System only working as a Two(2) Axis Digital Readout System(knee axis scale not reading. Y axis on display not working, plug Y axis into Z axis position on display, and have X& Y axis DRO system) Bridgeport Table Power Feed For X-Axis Square Chrome Ways ... moreon Knee. Square Ways on Column One-Shot Lubrication. Air assist for Hand Crank Knee Elevation Screw New driven vari disc bushing kit installed. New Drive Belt, Head sounds good. Overall Very Nice Condition. Will install new 2 or 3 Axis DRO system for additional $$$$. Approximate Weight: 4500 Lbs. Can be seen under power in our Downtown Louisville. KY. Warehouse. Will Load for Free. Ships from 40203, Skidding available for additional $$$. Will quote freight delivery cost. Will need complete business address. Glen@ amerigo machinery.com or 5024198183
|
|
|
Bridgeport Series 1 2HP Variable Speed Ram Type Vertical Turret Milling Machine
Gold International Machinery Corporation | Bridgeport Series 1. 2 HP Variable Speed, Ram Type Vertical Turret Milling Machine S/N: 229612 Our Inventory Number: 0343-470 Technical Specifications: 230V/3PH/50-60HZ, Year of manufacture: 1982, Table size: 9" x 42" Longitudinal travel: 30" Cross travel: 12" Vertical travel: 5" Table load capacity: 300 lbs. Spindle: R-8, Motor: 2 HP, Estimated floor space: 98" x 87" x 89" high, Estimated weight: 2.340 lbs. Equipped With: Bridgeport 6" milling vise with swivel base, This item is in very good condition! We can palletize. Cover and load this item for an additional $175. for DOMESTIC SHIPPING. Crating for INTERNATIONAL SHIPPING.PLEASE INQUIRE We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit ... moreour eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always availab
|
|
|
XLO Bridgeport Type Milling Machine
XLO Bridgeport type milling machine, please call 203-592-8402 with any questions before you bid. Buyer is responsible for all shipping and handling charges but we will assist in any way we can. Free loading on your truck or trailer from our Watertown Ct facility.We encourage you to inspect before you buy.Payment is in the form of cash or bank check unless otherwise agreed upon in advance.
|
|
|
BRIDGEPORT TYPE 90 DEGREE MILLING MACHINE ATTACHMENT ARBOR SUPPORT 3/4" hole
90 DEGREE MILLING ARBOR SUPPORT 3/4" hole. I dont see no name on the item good working condition Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. All items are sent same day if bought and payed for before 12.00 noon Monday- Friday. Before 10Am Sat. If not it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store for more great items and friendly. Reliable customer service. Thank You For Viewing
|
|
|
CNC MILLING MACHINE BRIDGEPORT TYPE CENTROID CONTROL RETROFIT 2006 CNC KNEE MILL
CNC MILLING MACHINE NASA II BRIDGEPORT TYPE KNEE MILLING MACHINE. CENTROID RETROFIT IN 2006 PC BASED CONVERSATIONAL SOFTWARE VERY SIMPLE AND EASY TO PROGRAM. 3 AXIS. MEHENITE CASTINGS, HAS RIDGED OVERARM, COOLANT, AUTO LUBE, ALLIGN POWER DRAWBAR, 3 HP HEAD, 30 TAPER, PC TOWER LOCATED IN ELECTRICAL PANEL FOR CLEAN OPERATION, CUSTOM BACK SPLASH, COMES WITH FULL SET PLUS SOME EXTRA OF 30 TAPER TOOL HOLDERS, ALSO COMES WITH A 6" KURT ANGLE LOCK TYPE IMPORT VISE, TABLE NEVER BEEN DRILLED OR MILLED, WAYS LOOK GOOD, CONTROL PANEL HAS 10 FOOT CORD COMES WITH CART FOR TOOLS, MONITOR, KEY BOARD AND CONTROL PANEL. APPROX. 500 HOURS SINCE RETROFIT. TRAVEL IS X-28" Y-13" Z-5" WE BOUGHT A MILLING CENTER SHORTLY AFTER THE RETROFIT AND HAVE NOT USED IT MUCH SINCE AND NEED THE ROOM SO IT NEEDS TO GO. VERY NICE CNC MILL. BUYER RESPONSIBLE ... moreFOR ALL SHIPPING AND ARRANGEMENTS WE CAN LOAD IT ON YOUR TRUCK OR FLAT BED SEMI TRAILER. THE MILL IS FOR SALE LOCALY SO WE RESERVE THE RIGHT TO END THE AUCTION AT ANY TIME. PLEASE TAKE A LOOK AT OUR EBAY STORE WE HAVE OTHER MACHINES AND TOOLS FOR SALE ANY QUESTIONS PLEASE EMAIL OR CALL 828-632-1500 IF NO ONE ANSWERS PLEASE LEAVE A MESSAGE WE WILL GET BACK ASAP THANKS VERY MUCH FOR LOOKING TODD AND SHANNON
|
|
|
BRIDGEPORT MILL TYPE JA QUILLMASTER & QRA ANGLE HEAD, Milling, Speed Increase
These tool holders are from a aeronautics company that closed in Dallas TX. There are no surprises here. Check out my other lots I have over 300 different tools to sell. I will definitely combine shipping where ever possible. You are Bidding on a BRIDGEPORT TYPE JA QUILLMASTER& QRA ANGLE HEAD Speed Increase 50% 1/2" Arbor 3-3/8" Opening I have a regular store so if you are interested place a bid or buy it now. I regularly remove items that have sold outside of eBay. Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos ... moreso you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know.
|
|
|
Mitutoyo digtal readout for bridgeport type mill machine
Mitutoyo digital readout for Bridgeport style milling machines. Was removed in fine working condition. What you will get is what is pictured.
|
|
|
SUPERMAX VERTICAL MILLING MACHINE 1988 (BRIDGEPORT TYPE MACHINE)
Selling a good old machine.1 owner. everything on it works. 9x48 table. Digital read out. electric way oiler. pneumatic Drawbar. power knee feed. 3Hp motor. The head sounds ok. May need belt in near future. The power knee feed works fine but the nylon gear has some teeth missing and wont last forever. The gear is a cheap fix. We will fork it onto your trailer for you.
|
|
|
3/4" R8 Collet, Bridgeport type milling machine, good used
For auction. 1pc R8 collet 3/4" Fits Bridgeport style milling machines Good used condition. No gouging on keyway, threads look good, smooth bore with a couple of rub marks Shipping will be via Canada Post. Combined shipping and alternate methods available, please contact prior to bidding Other collets and machinist gauges available I will endeavour to answer all questions as quickly as possible
|
|
|
3/8" R8 Collet, Bridgeport type milling machine, good used
For auction. 1pc R8 collet 3/8" Fits Bridgeport style milling machines Good used condition. No gouging on keyway, threads look good, smooth bore Shipping will be via Canada Post. Combined shipping and alternate methods available, please contact prior to bidding Other collets and machinist gauges available I will endeavour to answer all questions as quickly as possible
|
|
|
1/4" R8 Collet, Bridgeport type milling machine, good used
For auction. 1pc R8 collet 1/4" Fits Bridgeport style milling machines Good used condition. No gouging on keyway, threads look good, smooth bore Shipping will be via Canada Post. Combined shipping and alternate methods available, please contact prior to bidding Other collets and machinist gauges available I will endeavour to answer all questions as quickly as possible
|
|
|
MAXI TORQUE-RITE POWER DRAWBAR FOR BRIDGEPORT TYPE MILLING MACHINES
Maxi Torque-Rite. Torque-Rite is a Drawbar Built for the job. This unit was designed to be a POWER-DRAWBAR! Maxi Torque Air Power Draw Bar Draw bar total length- 23.25" Draw bar length- 18.50" Parts in the photo is what is being sold. Posted with
|
|
|
Bridgeport Type Right Angle Milling Head - Accomodates R8 Collets
BRIDGEPORT R-8 RIGHT ANGLE HEAD IN GOOD MECHANICAL CONDITION AS SHOWN. PAINT IS CHIPPED AS SHOWN. Technical Specifications: Features: Suitable for most mills, Vertical mill to a horizontal mill, Designed to simplify right angle work by reducing the need for special tooling and complex fixtures, For use on your R8 spindle with 3-3/8" overall diameter, Max. speed: 2000 RPM, Estimated Weight: 30 lbs, Overall Size: 5" x 5" x 9"
|
|
|
BRIDGEPORT Quill Master Type JA Right Angle Milling Head, Attachment.
BRIDGEPORT Quill Master Adjustable Right Angle Head Type JA A nice addition to your mill. These are VERY expensive as you know. Appears new inside and name plate has no scratches. Driver shaft looks like new. Original grey paint very brittle and flakey. For All 3 3/8" dia quill Vertical Mills Fits many"Bridgeport" copies like First. Excello Comes with 3/16" collet. Driver size is 1/2" Weighs 7 lbs. Buyer pays actual shipping. I will combine shipping as always. Shipping to USA is about 25-30$) Will ship the following day or same day after payment is made. Thanks and Happy Bidding!
|
|
|
BRIDGEPORT MILL RIGHT ANGLE QUILL MASTER TYPE MILLING ATTACHMENT
I think this is a genuine Bridgeport right angle(colllet type) milling machine attachment(but I'm no expert) It is in good physical condition except for one ding(see pictures) that does not effect it's performance. Get it while I've got it! SUPER FAST PRIORITY MAIL SHIPPING INCLUDED FOR FREE!
|
|
|
ORIGINAL BRIDGEPORT TEXRON QUILL MASTER TYPE JA MILLING ATTACHMENT - GREAT SHAPE
This is a genuine Bridgeport Quill master(JA) milling machine attachment. It is in great physical condition with original paint and only some normal chips in the paint from light use. I see no heavy use or abuse on this item(please see pictures) Get it while I've got it! SUPER FAST PRIORITY MAIL SHIPPING INCLUDED FOR FREE!
|
|
|
One ROYAL 1/8" R8 Collet, Bridgeport type milling machine used.
up for sale ROYAL 1/8" R8 Collet. Bridgeport type milling machine used. Please ask any questions you may have before bidding and GOOD LUCK. Happy Bidding! Thank you for visiting my auctions.
|
|
|
Bridgeport Milling Machine J Head On Ramco 10"x45" Table Base Knee Type
Used Bridgeport milling machine on Ramco base 10"x45" table. 1hp 220v 3ph J head 8 speed with power down feed. On a Ramco base which is in good condition with minor drill marks and scratches in the table. The ways have some scratches but are still decent. Backlash is less than 1/4 turn in the X and 1/8 turn in the Y. Has one shot lube. The power feed on the X does not work. I can convert this mill to 110v for $160 with a VFD. This mill runs great. Power down feed and kickout work fine. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a shipping quote. Machine will be ready for pickup almost anytime, if crating is required it will take at least 2 days to prep. Please check out my other auctions. Thanks for looking. This machine is ... morefor sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with eBay Mobile Posted with eBay Mobile. Posted with
|
|
|
Type 70 Servo X Axis Power Feed for Bridgeport or other Milling Machine
This power feed is in good working condition. It was removed from a Bridgeport Milling Machine. We tested it briefly and it ran smoothly in both directions and ran well through the entire range of speeds.
|
|
|
Bridgeport Quill Master, Type JA, 50% speed increase, Very Nice
For sale. A Bridgeport Type JA Quill Master Angle Head for mounting on a standard Bridgeport manual mill. 50% speed increase. Allows for angle milling and drilling. Very nice condition.
|
|
|
Bridgeport Mill Type MA Quillmaster Adapter
This Quill Master Type MA is manufactured by Bridgeport Machines. It is in great shape as you can see in the photos. There is free shipping on this item. If you have any questions, please ask! Thanks! Wik.06.
|
|
|
Hardinge R8 Collets (3) For Bridgeport Type Milling Machines Machinist Tool Box
Collets as you see actual items in pictures. View my other items for more great tooling finds.
|
|
|
1/4" and 3/8" R8 Collet, Bridgeport type milling machine, good used tool
For auction. 1pc R8 collet 3/8" 1pc R8 collet 1/4" Fits Bridgeport style milling machines Good used condition. No gouging on keyway, threads look good, smooth bores Shipping will be via Canada Post. Combined shipping and alternate methods available, please contact prior to bidding Other tools and machinist gauges available I will endeavour to answer all questions as quickly as possible
|
|
|
Servo Bridgeport Type 140 Power Feed with extra parts, some new parts
I have here one very good running used model 140 Servo power feed unit. The current plastic gear IS NO GOOD! but I am including three NEW gears! also the rapid feed button rubber boot is shot, BUT you get a NEW one also! along with a NEW spare push button! Left/right table stop microswitches function properly. There are also SEVERAL other related spare parts for you with this unit!you get ALL of the spare parts that are pictured! I have used these types of Servo brand units for 30+ yrs. And have no desire to use any others BUT these! Shipping to the lower 48 states. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146c7603a7b-0x118-
|
|
|
Jacobs 6A On R8 Arbor Milling Machine Drill Chuck Machinist Tool Bridgeport Type
Jacobs 6A drill chuck in r8 shank. Nice smooth easy open/close. See pics of actual item. Be sure to check out my other items for more great tooling finds.
|
|
|
Bridgeport Type R-8 Collets Lot of 7
Lot of 7 collets sizes are: 1/8" 5/16" 3/8" 1/2" 5/8" 11/16" 7/8" very good condition all with storage boxes. I can also ship these economy shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14750a87f27-0x115-
|
|
|
Servo Products Type 70 Bridgeport Power Feed
Servo Products Type 70 Bridgeport Power Feed 120 Volts No Mounting Hardware Comes as Shown in Pics Good Working Condition S/N 721771-B Questions? Call Robert at 607-259-5615 48-A. Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback
|
|
|
Servo Products Type 90 Bridgeport Power Feed
Servo Products Type 90 Bridgeport Power Feed 120 Volts No Mounting Hardware Comes as Shown in Pics Good Working Condition S/N 914347-B Questions? Call Robert at 607-259-5615 48-A. Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14777af2602-0x106-
|
|
|
Willis Microcut VS5000 vertical mill (bridgeport type)
Used Willis Microcut VS5000 Serial# 491203. Good condition. Power feeds on X,Y& Z. Table is 59" X 11.8" X travel is 47" and Y travel is 15" 40 taper machine with tool holders. Variable speed 5HP spindle. Bijur one shot automatic lube. Buyer to pay freight and arrange pickup. Will load on truck at no charge. From Willis's website: 5000VS Knee Mill Features The 5000VS knee mill provides a 5HP variable speed 60-3600 RPM. 40 taper spindle Hardened& ground table surfaces are standard on these conventional milling machines The 5000VS series II style milling machine provides built in tool trays on both ends of the table. These knee mills include a vertical table raising function by a 2HP motor with safety limit switch Willis 5000VS milling machines offer a chrome plated precision ground quill with a full 4â. ... moreinch quill diameter The 5000VS milling machine provides 47 inch x-axis travel and 15 inch y-axis travel The 5000VS Knee Mill also includes a 59 inch x 12 inch table These large knee mills include 12 longitudinal power feed rates operated by a 12 speed gear box with a 2HP motor Willis 5000VS knee mills are also equipped with a rapid traverse function The 5000VS milling machine is constructed from a “Meehaniteâ€� casting and weighs 4.950lbs This conventional knee mill provides huge 47 inch x 15 inch. X& Y travels as well as an extra wide 33½ inch saddle for maximum support This manual milling machine also includes an automatic lubrication system Hardened and ground ways are also standard features on Willis 5000VS milling machines SPECIFICATIONS 5000VS Table Dimensions 59" x 11.8" Travels- Longitudinal/ Cross(Manual) 47" x 15" Vertical Knee Travel 20" T-Slots(3) 5/8" Ram Travel 20" Ram Swivel 360° Quill Diameter 4-1/8" Spindle Motor 5 HP Spindle Speeds(variable) 60-3600 Spindle Taper 40 Taper Quill Power Feed Rates(Inches Per Revolution) 0.00032" 0.0017" 0.0053" Head Tilting Left to Right(De
|
|
|
MT2 To R8 Adapter Milling Machine Machinist Tool Bridgeport Type Cleveland Enco
R8 mt2 adapter. See pics of actual item.
|
|
|
G110449 Bridgeport X&Y Axis Lead-Screws Used Ball-Type 26031-42 & 26032-12
Click to Enlarge) Product ID# G110449 This Set of Used Bridgeport X&Y Axis Lead-Screws. Ball-Type, 26031-42& 26032-12, appears to be in fair/good cosmetic condition, although there are a few small dings, scratches, signs of previous use. Please look at the photos. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as“Not Working” Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 58“L x 7“W x 5“H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without ... morewarranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 39 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 18 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts
|
|
|
FIRST VERTICAL MILL 2HP MOTOR VARIABLE SPEED LC 1-1/2 VH BRIDGEPORT TYPE MILL
FIRST VERTICAL MILL 2HP MOTOR VARIABLE SPEED Model: LC 1-1/2 VH Table Size: 42” x 9” Spindle Motor: 2 HP Spindle Taper: R-8 Spindle Quill Travel: 5” Longitudinal Table Travel: 30” Cross Travel: 12” Knee Travel: 16” Voltage 220V Call or E-mail for shipping charge 714-938-1388 Buyer responsible for shipping freight charge. Please contact for shipping quote, freight charge will vary by location. Question please E-mail ahnv@avtechmachine.com www.avtechmachine.com
|
|
|
Servo X Axis Power Feed Type 140 for Bridgeport Milling Machine
Servo X Axis Power Feed Type 140 for Bridgeport Milling Machine Peak Torque(half-wave series motor) To 140 in-lb Intermittent Torque: 105 in-lb Continuous Torque: 90 in-lb Rapid Traverse: 12 IPM for knee. 35 IPM for table and cross Helical gearing and torque limiting friction safety clutch Electrical: 110V. 50/60Hz, 2.5A Approximate weight: 15 lbs The item for sale is a Servo Power Feed with everything required to mount on the X-axis feed screw of a Bridgeport. It is in good. Working condition.
|
|
|
Servo power feed, type 150, Bridgeport, Lagun, Jet milling machine
Servo power feed. Model 150 excellent condition, very well maintained. with 3 sizes( 625, 20mm, and.875) of bushing to fit, Bridgeport, Lagun and Jet milling machines. 1 new drive gear, 1 flat- stop mount, 1 angled- stop mount, brass gear hub with dial lock nut, shim assortment.
|
|
|
Bridgeport Dual Type Adapter For "M" Head
This auction is Bridgeport Dual Type Adapter For"M" Head. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
TRAV A DIAL MOUNTING WITH PLATE AND BOLTS FOR BRIDGEPORT TYPE MILL BR-1 E-23
TRAV A DIAL MOUNTING BRACKET INCLUDES MOUNTING PLATES AND BOLTS FOR BRIDGEPORT TYPE MILL BR-1 MOUNTING BRACKET NUMBERS ON PART: BR-1 USED IN GOOD PHYSICAL CONDITION PLEASE SEE OUR PICTURES EVEREST R&D CORP. 16542 BURKE LANE HUNTINGTON BEACH. CA 92647 BUSINESS HOURS: 8:30- 3:30 PST IF YOU HAVE ANY QUESTIONS PLEASE CONTACT ME CALL FRED MUHS OR EMAIL 714-842-8622 PLEASE READ THE FOLLOWING IMPORTANT PAYMENT AND SHIPPING INFORMATION*California Sales Tax will apply to all California residents. I also offer Free Local Pick Up. If you order several items I can combine them to save you shipping charges. Please wait for me to combine the items and send you an invoice before you make payment. All P.O. Box addresses can ONLY be shipped and delivered by the Postal system. PayPal is accepted as well as other types of payment. For other types of payment ... moreplease contact me. Orders will ship within 1 business days after receipt of payment. Shipping prices are for the lower 48 states. All other buyers should ask for a shipping quote BEFORE buying. Large or heavy items may have additional handling charges. Please contact me if you have any questions. Shipping by first class mail international has no tracking. I can only give you the customs form number and date of shipment. I appreciate payment in a timely manner. If there is a problem please contact me before you leave feedback and I am sure we can resolve the issue. You can make a reasonable offer on any item I have for sale. Please email me your offer if it is not available through eBay. I appreciate your business and if you have any questions on this or any other item please contact me. FRED MUHS PHONE 714-842-8622 OR EMAIL
|
|
|
Bridgeport Type 90 Deg. Head
This is in good condition
|
|
|
Kurt power drawbar for bridgeport type mill
Kurt power draw bar. Off of a bribgeport clone. Worked fine on machine may need air hose work and needs to be cleaned up good it is quite dirty
|
|
|
MACHINIST TOOL BRIDGEPORT MACHINE INC QUILL MASTER MILLING ATTACHMENT TYPE JA
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 PRECISION MACHINIST TOOLS& PARTS BRIDGEPORT MACHINE INC QUILL MASTER MILLING ATTACHMENT TYPE JA PURCHASE INCLUDES MACHINE. ORIGINAL PACKAGING(NOT IN GOOD CONDITION) AND OTHER MISCELLANEOUS TOOLS FOR MACHINE*PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* THIS PIECE CAME FORM A VERY WELL MAINTAINED MACHINIST SHOP. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL ... moreTRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated.
|
|
|
Bridgeport Quill Master Type JA Milling Attachment with QRA head
This auction is for one Bridgeport Quill Master Type JA milling attachment. Accessories and box as shown. Excellent condition. Bought approximately 28 years ago, thought it was new then, hasn't been used since.
|
|
|
Bridgeport Quill Master Type JA Milling Attachment with QRA right angle head
The paint on this unit is a little rough. But I was told it all works fine. I don't have a way to check it, if there is a problem with it, I do accept returns
|
|
|
RARE! BRIDGEPORT QUILL MASTER MULTI ANGLE HEAD TYPE QRA RIGHT ANGLE ATTACHMENT
Bridgeport Quill Master Multi-Angle Head Attachment Manufactured in Bridgeport. Conn Type QRA Fits on Quill Master Attachment or any other head with a 13/16" Mount 3/16" Drive Shaft. 3/16" Internal Spindle No Reserve! Check my other auctions for mor e quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive ... morethe combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Sunnen VGS-Type Rollover / Tilt Fixture for Cylinder Head Repair, Bridgeport
For Sale is a used Shop Built. Specialty Rollover Table for use on a Bridgeport type mill for cylinder head repair. Low Mileage. Fits Bridgeport, Webb, Jet, Sunnen, IDL, Kwik Way, Peterson, etc. With this extremely well thought out and designed system. The machinist is provided unprecidented access and convenience when working on the most exotic components. By nature of the multi-angular locating capability of this system, not only can highly precision work be performed but also be performed in a quick and efficient manner. Can be clamped to a mill table or used loose on a drill press as a disassembly bench. Valve seat bench, or spring-guide alignment fixture. Facilitates easy installation of Heli-coils, etc. Could be converted to an air float. You will be able to use it for Cylinder Head Guide/Seat repair. Boss Cutting, and Ball Driver work. ... moreMeasures: 32" x 12" x 7" The table length is 31" x 9" Weight = 100lbs. Can Demonstrate Working Condition in Scottsdale. Arizona. For Sale is the fixture only. Mill. Mill table, cylinder head, etc. for photographs only. They are not included. We reserve the right to end the listing early because the item is also for sale locally. Please call or write if you have additional questions. 602-321-0212. Shipping: This item will ship UPS. The item is ready for pick-up. I only ship to the address listed with eBay. Local Pick-up is available in Scottsdale. Arizona. I do not charge a palletizing or crating fee. I will gladly combine shipping. Please wait for an invoice if you purchase more than one item. For a quote with your service provider use: Business with dock. 85257, 32" x 7" x7" 110lbs. This item meets the size and weight limitations to allow for shipping with UPS. I am always willing to sell and ship internationally. International Buyers who are served by the eBay Global Shipping Program can buy and pay easily. International buyers living in countries not served by the eBay Global Shipping Program. Must wait for an
|
|
|
Servo type 90 Power Feed from a Bridgeport Mill, 115 volt / Variable Speed
A local company is in the process of re-locating its machine shop facility. In doing so. The maintenance shop is being liquidated along with any surplus tools and accessories from the machine shop. As the pieces are released for disposition they will be listed for sale. I will do my best to describe the items accurately but sale is final so please feel free to ask any questions you might have. Offered here is a Servo Power Feed that came off of a Bridgeport Milling Machine. The feed is a type 90. 91893G-B. I put power to the feed and the indicator light went on, the motor turns both forward and reverse, the Variable Speed works and the limit switch turns the motor off. This was in the maintenance shop but I am not sure what was needed. It is missing the assembly that is driven by the bevel gear and I don't know what else is needed. The ... morefeed is being sold for parts or repair.
|
|
|
milltronics cnc mill 3 axis bed mill Santec RB-10 bridgeport type
Santec cnc 3 axis bed mill with a Milltronics Centurion 1 control. Similar to a bridgeport mill Can use as a manual machine or cnc. Conversional and G-code programing. Mist and flood coolant. Head runs and sounds very good. Holds great tolerance. Takes R-8 collets. 220 3phase motor. Vice not included. Under power and can see run. Call/ text with any questions or to see run 815 575 4475 Pick up only. I do not have a Forklift to load. All shipping is Buyers Responsibility
|
|
|
2008 BRIDGEPORT/HARDINGE E-Z VISION 3 AXIS CNC TEACH-TYPE VERTICAL MILL
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 2008 BRIDGEPORT/HARDINGE E-Z VISION 3 AXIS CNC TEACH-TYPE VERTICAL MILL Ref# 153195 iammdna XMVCNC BRIDGEPORT/HARDINGE CNC VERTICAL MILL MODEL:SERIES I WITH E-Z VISION CNC CONTROL 3-AXIS CNC PLUS MANUAL ... moreHANDWHEELS S/N: HDNG-3964D. NEW: 2008 SPECIFICATIONS: TABLE SIZE. 9" x 48" TABLE TRAVEL(X-AXIS) 30" SADDLE TRAVEL(Y-AXIS) 12" QUILL TRAVEL(Z-AXIS) 5" KNEE TRAVEL. 16" RAM TRAVEL. 12" MAXIMUM LOAD DISTRIBUTED. 300 LBS. SPINDLE TAPER. R-8 SPINDLE SPEED RANGE. 60-4200 RPM. SPINDLE DIAMETER. 1-7/8" QUILL DIAMETER. 3-3/8" FLOOR AREA(DOORS CLOSED) 8'2" x 7'3" HEIGHT. 6'8" WEIGHT(WITH CONTROL) 2.900 LBS. EQUIPPED WITH: BRIDGEPORT EZ-VISION CONTROL(3-AXIS) PC BASED. HD 1.44 MB, 8MB PC FLASHDISK,POWERFUL CANNED CYCLES. USER DEFINABLE MACROS. ETHERNET PORT, USB. 10.5 COLOR LCD SCREEN. IN MANUAL MODE THREE AXIS DIGITAL READOUT. X. Y& Z BALLSCREWS AND SERVO MOTORS. CHROME WAYS. TORQUE-RITE AIR ACTUATED POWER DRAW BAR. BIJUR AUTO-LUBRICATION SYSTEM. SPRAY MIST COOLANT SYSTEM. POWER DRAW BAR. BRIDGEPORT SERIES I HEAD 2/3 HORSE POWER SPINDLE MOTOR VIDEO: INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: SUPERB* Machine Location: HARRISON. NJ Click Here For More Br
|
|
|
Bridgeport type presicion boring head
Extra size boring mill with box use but in good condition. 7/8 shank/bushing on box, 2 front bores accept 3/4 boring tools and they are 1 1/4 apart. Heavy duty was use on our shop and we are down sizing. Must sell. Good luck
|
|
|
USD BRIDGEPORT MILLING MACHINE TABLE SCREW 42" TABLE WITH SERVO FEED TYPE
FOR A 42" MACHINE 52-1/2 OVERALL FOR SERVO TYPE FEEDS OR NO FEED I ALSO HAVE THE ONES THAT USE THE FACTORY FEEDS A LITTLE SHORTER THIS IS IS FOR THE SERVO FEED LOOK IN OTHER AUCTION WE HAVE OTHERS ALL SIZE WE STOCK ALL BRIDGEPORT MILL PARTS
|
|
|
ProCunier Model 3 type E tapping head fit Bridgeport milling machine drill press
lightly used Procuier type E tapping head model#3. comes with what is shown in pictures. which is the tapping head. no collets but in good working order. selling as is. This part can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Or shipped. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will ... morebe charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b30fb8402-0x10f-
|
|
|
1 Shot Knee Lubrication Pump from Chevalier (Bridgeport Type) Milling Machine
A local company is re-locating its machine shop and as a result will be disposing of the surplus items from both the machine shop and the maintenance shop. I will do my best to describe the pieces as accurately as possible. But sale is final so please feel free to ask any questions that you might have. Offered here is a 1 shot Lubrication Pump shown just as it was removed from the machine. This was mounted on a Chevalier Vertical Mill which was slated for refurbishing. But after the work was initiated the company decided not to go ahead with the project. I depressed the handle and oil pumped through the fittings so it appears to be in good condition. It will be shipped with the fittings as shown in the picture. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14b63242711-0x109-
|
|
|
BRIDGEPORT QUILL MASTER TYPE JA WITH QRA INCLUDED
THIS IS A QUILL MASTER TYPE JA WITH QRA ALL IN GOOD WORKING ORDER ASK ANY QUESTIONS AND THANKS FOR LOOKING!
|
|
|
ORIGINAL BRIDGEPORT QUILL MASTER TYPE JA MILLING ATTACHMENT with EXTRA COLLET
This is an Original Bridgeport Quill Master Type JA Milling Attachment with manuals.Key and extra collet. This Quill Master has been well cared for and has been used very little, please see detailed pictures as this would be the actual part you will receive. G-2 ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14b9ec64476-0x11a-
|
|
|
BRIDGEPORT No. 1J Ram Type Vertical Mill Milling Machine Short Table Step Pulley
Used BRIDGEPORT Vertical Milling Machine Stock#32004 Table Size- 9" x 32" Currently untested. Offered as is. As removed from service. PRICE: $1.750.00 USD FOB TRUCK DAYTON OH. $200 skidding fee if required for shipping. Offered locall y an d subject to prior sale. Also su bject to the standard MD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically unsat isfactory or repair at seller option. Loading is availab le. Buyer resp onsible for shipping. We can assist with shipping rate quotes on request. Local sales tax is 7.25% if appl icable. Wire transfer. Ca shier's check. Paypal, company check. Mc and visa are all acceptable forms of payment. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms& Conditions.
|
|
|
Milling cutter head set (4 heads) for Bridgeport type mills, R8
4 pc Bridgeport type milling cutter head set All made by Ingersoll. All using the same type of insert(Ingersoll APEH64R01 insert) These are a two turn carbide insert and can be used for a wide variety of material cutting applications. I never bought R8 adapters to mount these cutters on, off hand I do not know the R8 adapter number but the 3 smaller cutter heads has a.750 pilot bore with a.312 keyway and uses a 3/8 cap screw. The larger cutter head has a 1 inch bore with a.375 keyways and uses a 1/2 inch cap screw. With the addition of 2 types of R-8 adapters and buying new inserts. This will make a awesome set of cutter head size options while cutting down on insert types needed for different cutters. Cutter sizes. Large head has a 2 15/16 cutter width. 2 medium heads has a 2 7/16 cutter width. Small head has a 1 15/16 cutter width.
|
|
|
Bridgeport Quill Master Right Angle Head Type MA M & T Head Degrees Collet
Mahr Internal Thread Gage M18x1.5 Manufacturer: Bridgeport Quillmaster Angle Head Description Type MA- Rotates smoothly All purchases must be paid with wire transfer or PayPal. Item will be shipped after payment is recieved and cleared. Buyer is responsible for all shipping costs. If item must be shipped via freight then the buyer is responsible for making all arrangements and must contact us to arrange a pick up time. You can contact us through ebays messaging system or at sales@aircomtechnologysales.com. You will recieve a response within 24 hours. If you would like to contact us immediately you may call 860-688-3320. Note that all sales are final. Items are sold as-is and unless stated as in used but in working condition and you recieve the item not working no refunds will be given.
|
|
|
SERVO type 70 power feed for bridgeport x or y axis table variable speed WORKS
Selling a genuine SERVO brand power feed. It is a model 70t. It is outfitted with variable speed. This is will fit on your bridgeport or bridgeport type milling machine with the right mount. we bought a number of these units. And sent them out to a repair facility to be inspected/ serviced. Selling with a 30 day guarantee against mechanical or electrical failure. Fee free to use the quantity button to add more than 1 to your cart if you are interested in multiples. COMES EXACTLY AS PICTURED. PLEASE MAKE SURE IT IS RIGHT FOR YOUR APPLICATION BEFORE BUYING AS WE ARE NOT ACCEPTING RETURNS FOR ITEMS PURCHASED DUE TO YOUR ERROR Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES ... moreTAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
|
|
|
BRIDGEPORT TYPE JA QUILLMASTER HEAD RIGHT ANGLE HEAH NICE ONE
YOU BIDDING ON USED BRIDGEPORT QUILLMASTER TYPE JA HEAD WITH ONE COLLET 3/16" IN EXCELLENT WORKING CONDITION. IF YOU HAVE A QUESTION. PLEASE ASK BEFORE YOU BIDDING. SHIPPING AND HANDLING IN THE USA $15.00
|
|
 |