|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Holland, United States MODEL. . 2M. VERTICAL KNEE TRAVEL. 13". We load for free. May inspect under power. TAPER IN SPINDLE. . #50. MAIN MOTOR. . 5 HORSEPOWER.
Buy It Now
Condition: For parts or not working Location: Dayton, United States For sale used CINCINNATI Horizontal Milling Machine.
Buy It Now
Condition: Used Location: Toledo, United States VERTICAL FEEDS. (16) 1/8 TO 15 IPM (1.5 TO 190 MMPM). VERTICAL TRAVEL OF KNEE. 19". VERTICAL HEAD. . YES TOOLMAKERS OVERARM. VERTICAL HEAD MOTOR. 3 HORSEPOWER.
Buy It Now
Condition: Used Location: Houston, United States Chuck is super tight and appears to work great.
Buy It Now
Condition: Used Location: Haxtun, United States Serial number 13984. Tool works and operates well and as it should. Universal table with 12" vise x 10" open.
Buy It Now
Condition: Used Location: Saint Joseph, United States This brace will add rigidity when horizontal milling. This machine is already A beast this makes it that much better. Cincinnati #3 horizontal over arm ... morebrace. This add is for the over arm brace only.
Buy It Now
Condition: Used Location: Elizabethton, United States Cincinnati Horizontal/Vertical Combo Milling Machine. Believed to be 1950's model year. Machine works and has been tested June 2023. Demo available in ... moreperson or remote. Location is at General Machine in Elizabethton, TN. Regional delivery available. We are selling because we have several manual mills including another identical to this one that we are keeping.
Buy It Now
Condition: Used Location: Roanoke, United States Used CINCINNATI 650-20DK Vercipower 50 Hp 440-Volt Horizontal Bed Type Milling Machine. Horizontal Travel - 50". Vertical Travel - 24". Vertical - 3/16 ... more- 45 IPM. Vertical Rapid Traverse - 15 IPM. Feed Rates - 32.
Buy It Now
Condition: Used Location: Brookpark, United States CINCINNATI #O-12 R/E HORIZONTAL MILL. -- ARBOR SUPPORT. -- 0-12 PLAIN R/E MILL. -- COOLANT PUMP. -- 6" X 27" TABLE. -- MODEL: 0L.
Buy It Now
$26.82 Shipping Condition: Used Location: Mc Leansville, United States According to the folks on Practical Machinist, this is for a No. 2 "non dial type" Cinci. horizontal. I have included detail pictures and measurements. ... morePlease review carefully and ask for additional measurements and/or pictures if you are unsure if this will fit your machine. I will not accept returns if it is the not the right size for your mill. I also have a Type B support for the same machine listed separately. Happy to make a deal if you want both.
Buy It Now
Condition: Used Location: Elma, United States Cincinnati Milacron (Blue). 1987 Cincinnati Milacron10HC-2500-A 460 Volt 4,000 RPM 5 Axis Horizontal Machining Center 100"X. Model: 10HC-2500-A Horizontal ... moreMachining Center. 5-Axis Horizontal Machining Center.
Buy It Now
$15.00 Shipping Condition: New – Open box Location: Berlin, United States This arbor support bushing fits mid-size Cincinnati horizontal mills. This is for "B" style arbors and arbor supports. Bore takes 1-1/2" dia. Smaller ... moresizes need reducing bushings. This item is made by Cincinnati.
Buy It Now
$15.50 Shipping Condition: Used Location: Dearborn Heights, United States Up for sale is this Cincinnati Horizontal Milling Machine Index Lever Positions Plaque Plate Parts. THIS PLATE IS MADE OUT OF CAST IRON. This Plate is ... moreused. You can see this in the photos. Plate: 13-7/8" x 3-1/4" x 7/32".
Buy It Now
$124.45 Shipping Condition: Used Location: Yorktown, United States Kearney Trecker NMTB 50 1-1/4“ Horizontal Milling Machine Arbor 12” from flange to nut for machines like Cincinnati K&T Milwaukee. Condition is Used. ... moreActual item pictured.
Buy It Now
Condition: Used Location: Millstadt, United States Used Cincinnati#2 horizontal milling machine vertical head attachment with draw bar. And nmtb 50 drive adaptor gear. Head is in decent used condition ... morespins smooth, drive gears look good. Came from a machine with the dove tail overarm. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a freight shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with
Buy It Now
Condition: Used Location: Cincinnati, United States MODEL: 3UMA. NIIGATA BED TYPE UNIVERSAL MILLING MACHINE. "This machine is a bed type universal milling machine which has a double swiveling spindle head. ... moreBecause of its double swiveling spindle head it can be used as a horizontal or vertical milling machine.".
Buy It Now
$124.45 Shipping Condition: Used Location: Yorktown, United States Scully Jones NMTB 50 1“ Horizontal Milling Machine Arbor 18”. Condition is Used. Actual item pictured.Be sure to view our other items for more great tooling ... morefinds.
Buy It Now
Condition: Used Location: Elk Grove Village, United States 24 spindle speeds from 25 to 2,000 RPM.
Buy It Now
Condition: Used Location: Cincinnati, United States Serial No 31401C74-0012, Model 0-12, Ltr DL. PLAIN AUTOMATIC HORIZONTAL PRODUCTION MILL. Spindle-Head Vertical Travel, Hand 4.5". Spindle-Head Vertical ... moreTravel, Power 2.5". Vertical Spindle-Carrier Feeds 1 to 10 IPM.
Buy It Now
Condition: Used Location: Rocky Hill, United States Cincinnati Vertical Milling Head Attachment Cincinnati Vertical Milling Attachment Ref.78A-58 Serial No. AHA5M7/23 Fits: 2ML. 2MI, Cinova 80, Cinel-60, ... moreCinpak-45 Single Swivel#50 Taper Spindle Includes Drive Gear Excellent Condition Approximate Net Weight: 230 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
Buy It Now
Condition: Used Location: Cincinnati, United States KURAKI HORIZONTAL BORING MILL. Table Size: 35-1/2" x 67" (7 T-Slots). Spindle Head Vertical Traverse: 48". 18 Spindle Speeds: 10 to 1000 RPM. 11 KW Main ... moreMotor. Cincinnati, Ohio 45223.
Buy It Now
Condition: Used Location: Cincinnati, United States #315-183 CINCINNATI-MILACRON "HYPOWERMATIC" #29223. (2) Arbor Supports. EXTRA-HIGH HORIZONTAL-SPINDLE PRODUCTION MILL. Spindle Taper #50 NSTD. (16) Spindle ... moreSpeeds, Range 50 to 1200 RPM. Spindle Motor, Horsepower 15 HP.
Buy It Now
$14.00 Shipping Condition: Used Location: Amenia, United States Cincinnati Milling Machine Company Stubby Shaft 7/8 Part # 130730. I believe this is a short horizontal shaft for a Cincinnati milling machine.I could ... morebe wrong. I got it while cleaning out a barn. Selling as is. Send me an offer
Buy It Now
Condition: Used Location: Cincinnati, United States 310-154 CINCINNATI-MILACRON "POWERMATIC". Series "POWERMATIC". HORIZONTAL-SPINDLE PRODUCTION MILL. Spindle-Head Vertical Travel (Y-Axis). 14". Feed Drive ... moreMotor, Horsepower. 3 HP. Auto Quill Retraction.
Buy It Now
Condition: Used Location: Cincinnati, United States PLAIN HORIZONTAL MILL - #26837. Ltr OD, Series "DUAL-POWER". #4 CINCINNATI-MILACRON "DUAL-POWER" DIAL TYPE. Knee Vertical Travel (Y-Axis) 20". (32) Vertical ... moreFeeds, Range 3/32 to 22.5 IPM. Power Rapid Traverse, Vertical 37.5 IPM.
Buy It Now
Condition: Used Location: Cincinnati, United States HORIZONTAL MILL. Knee Vertical Travel (Y-Axis) 20". 315-15 CINCINNATI-MILACRON PLAIN DIAL-TYPE. (32) Vertical Feeds, Range 3/16 TO 45 IPM. Power Rapid ... moreTraverse, Vertical 75 IPM. Feed Motor, Horsepower 3 HP.
Buy It Now
Condition: Used Location: Cincinnati, United States 425-266 CINCINNATI-MILACRON "HYPOWERMATIC". Ltr DL, Series "HYPOWERMATIC". HORIZONTAL-SPINDLE PRODUCTION MILL. Spindle-Head Vertical Travel (Y-Axis) 17.25". ... moreOverall Height 6'2". Floor Space Required, L x D 15'6" x 8'.
Buy It Now
$77.39 Shipping Condition: Used Location: Rocky Hill, United States uareTradeTHIS IS A 1" X © AP6.0TH THIS IS A 1-1/4" X 18" HORIZONTAL MILLING MACHINE ARBOR WITH SPACER. RUNNING BUSHING, ARBOR NUT& ... moreNo 50 TAPER 51 1 1/4 B-18 36165 SCULLY JONES CHICAGO FOR USE ON MILLS TO HOLD SAW BLADES AND VARIOUS CUTTERS. IF THIS IS NOT THE SIZE YOU WANT. E MAIL ME A DESCRIPTION OF WHAT YOU WANT, I DO HAVE CUTTERS AND MORE ARBORS. FOR SHIPPING QUOTES CALL TINA AT 727-362-8318, ALL OTHER QUESTIONS CALL GERRY AT 727-547-0616. WEIGHT IS 28 LBS, OVERALL LENGTH IS 25-1/2 INCHES I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK. Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616. FOR SHIPPING QUOTES, CALL TINA AT 727-362-8318 WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE ACCEPT ALL MAJOR CREDIT CARDS! I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping, and the item is shipped, YOU, the BUYER, are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 47 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Buy with confidence! On Feb-18-09 at 02:10:41 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cr
Buy It Now
$58.56 Shipping Condition: Used Location: Dayton, United States LOCATION: WB17-4-2-2. M & J TOOLING LLC. / LABELING PRODUCT SPECIFICATIONS AND / OR LABELING.
Buy It Now
Condition: Used Location: Tucson, United States This machine is a solid workhorse for slotting, straddle milling, and slab milling. Bed Type Production Horizontal Milling Machine. FREE LOADING ONTO ... moreTHE TRUCK OF YOUR CHOICE. Fixture the part, flip the lever, and watch it cycle.
Buy It Now
$26.25 Shipping Condition: Used Location: Hamburg, United States
Buy It Now
$45.58 Shipping Condition: Used Location: Millstadt, United States Used Cincinnati Clutch Handle.
Buy It Now
Condition: Used Location: Cincinnati, United States HAAS EC-400 CNC HORIZONTAL MACHINING CENTER. Number of Pallets 2. Model EC-400, S/N 2054698, New 2015. Y-Axis (Vertical Travel) 20". Max Cutting Feed ... moreRate 500 IPM. Max Spindle Torque 75 FT-LB @ 1400 RPM.
Buy It Now
Condition: Used Location: Cincinnati, United States #215-153 CINCINNATI-MILACRON "HYPOWERMATIC" #29224. Series "HYPOWERMATIC". HORIZONTAL-SPINDLE PRODUCTION MILL. Feed Drive Motor, Horsepower 3 HP. Overall ... moreHeight 5'11". CATALOG SPECIFICATIONS Spindle Motor, Horsepower 15 HP.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. VERTICAL TRAVEL OF SPINDLE. 10". SPINDLE CENTER TO TABLE. 4-1/4" TO 14-1/4". SPINDLE SPEEDS BY CHANGE GEARS. (16) 30 TO 1200 RPM. ... moreSPINDLE TAPER. 50.
Buy It Now
$172.41 Shipping Condition: Used Location: Rocky Hill, United States Proud to carry on the tradition set by Industrial Surplus of Connecticut in its 50 years of service.
Buy It Now
$11.70 Shipping Condition: Used Location: Millstadt, United States Cincinnati #4 X-Axis Gib Screw in good condition.
Buy It Now
$77.61 Shipping Condition: Used Location: Millstadt, United States You are bidding on an outboard arbor support that I believe is for a Cincinnati or Kearney and Trecker milling machine. I do not know what model it fits. ... moreIt is made of cast iron. The distance from the base to the center of bushing measures 8.125" with a tape measure. The dovetail is 6.188" tape measure) at the widest point and 4.221" at the narrowest. The ID of the bronze bushing is 2.123" Hopefully this is enough information to ensure that it fits your machine. This item is in good useable condition with a few nicks in the paint. This came in a large lot of tooling I bought surplus from a local factory. Check my other items for another outboard support. Arbors, and more. If you want more than one item, add them to your cart, then request a total. This way I will be able to combine shipping. Bid with confidence, you will not be disappointed. I was told by a member that these arbor supports fit a K&T S12 from 1968. Thank you!
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Cincinnati Horizontal Three Spindle 3 Axis N.C. Milling Machine Operator's Manual. It may not have the original color cover as it is a Digitally Enhanced ... moreQuality Bound Copy. Pictures of the Machine Says A Thousand Words.
Buy It Now
Condition: Used Location: Toledo, United States 6 HORIZONTAL. MAIN MOTOR. . 50 HORSEPOWER. VERTICAL FEEDS. . (32) 3/32 TO 22-1/2 IPM. VERTICAL TRAVEL. . WORKING SURFACE OF TABLE. 104-1/2" X 20".
Buy It Now
$22.59 Shipping Condition: Used Location: Berlin, United States Cincinnati No. 1-18 and 2-24 Feed Change Gears This is a complete set of standard feed rate change gears for the popular No. 1-18 and 2-24 horizontal ... moremilling machines. The set is comprised of(8) gears: 21. 25, 29, 33, 37, 41, 45, and 49. These are the standard ones on virtually all 1-18's but check your machine's feed chart. Does NOT include the back gears. Which are offered separately. We SPECIALIZE in parts and tooling for CINCINNATI milling machines!
Buy It Now
$22.59 Shipping Condition: Used Location: Berlin, United States Cincinnati Repair Part Gear Bevel on Leadscrew#63671 Part of the assembly that drives the table leadscrew on horizontal milling machines. Complete with ... moreinternal bronze bushing. This item appears unused but has a very slight surface rust. Original Cincinnati Part. We SPECIALIZE in parts and tooling for CINCINNATI milling machines! Reference the part number(63671) when you have questions regarding this item.
Buy It Now
Condition: Used Location: Toledo, United States MODEL. 205 12 PLAIN CINEL 60. HORIZONTAL TAPER. TOOLMAKERS OVER ARM. VERTICAL HEAD DUAL SWIVEL. VERTICAL TAPER. #50NS. SPINDLE SPEEDS. 33 TO 2,000 LBS.
Buy It Now
Condition: Used Location: Holland, United States MODEL 630-20 PLAIN VERCI POWER. VERTICAL HEAD MOUNTED ON OVERARM YES. RANGE OF FEEDS 3/8 - 90 IPM. LONGITUDINAL TRAVEL 60. CROSS TRAVEL 18". SPINDLE SPEEDS ... more16 TO 1600 RPM. TABLE 20" X 104-1/2".
Buy It Now
Condition: Used Location: Cincinnati, United States 107-122 CINCINNATI-MILACRON "POWERMATIC 100 RF". Serial No 11B11P1AHE-18, Series Powermatic 100 RF. HORIZONTAL-SPINDLE PRODUCTION MILL. Feed Drive Motor, ... moreHorsepower 1.5 HP. (16) Spindle Speeds, Range 30 to 1200 RPM.
Buy It Now
Condition: Used Location: Toledo, United States 400-188 HYPOWERMATIC. OVERALL TABLE SIZE. 18" X 128". TABLE AREA (T-SLOTTED). 18" X 120". SPINDLE SPEEDS. . (16) 30 TO 1200 RPM. SPINDLE TAPER. #50 NS.
Buy It Now
Condition: Used Location: Cincinnati, United States HORIZONTAL-SPINDLE PRODUCTION MILL #29798. 107-122 CINCINNATI-MILACRON "POWERMATIC 100 RF". Serial No 11B11P1AHE-17, Series Powermatic 100 RF. Outboard ... moreArbor Support -Two Arbor Supports. (16) Spindle Speeds, Range 30 to 1200 RPM.
Buy It Now
$182.41 Shipping Condition: Used Location: Berlin, United States ISO 50 INTERNATIONAL TAPER HORIZONTAL MILLING ARBOR ISO 50 X 1 1/2" X 30" WORKING LENGTH 38.1MM X 760MM COMPLETE WITH SPACERS AND NUTS FULL ... moreWORKING ORDER. FAST. FREE DELIVERY. UK
Buy It Now
Condition: Used Location: Lincolnshire, United States Horizontal Rotary Surface Grinder Heald 361. Distance top of chuck to centerline of wheel. Chuck feed rates - Variable.0 - 12 FPM. Independent Lubrication ... moreSystem for Chuck. Swing inside coolant pan - Maximum.
Buy It Now
Condition: Used Location: Carlisle, United States Cincinnati 205-12 M.I. PLAIN LL Horizontal Mill 54" x 12" 440V 3PH 5HP Miller Cincinnati 205-12 M.I. PLAIN LL Horizontal Milling Machine 54" ... morex 12" Table 5HP 440VAC- 3PH Serial Number: 2J2P5PN-2-F Removed from working environment. Machine was steam cleaned after removal. Local Pickup Only on this item. Payment. Payment via PayPal only unless otherwise noted. Payment for Auction Items is due within 24 hours of Auction Close. Thank You! Shipping. At TRIAD Trading we use multiple shippers to serve you better. Your item may be shipped via USPS. UPS or by Truck Line. Please check the item details for more specific shipping information. WE LOVE INTERNATIONAL CUSTOMERS! If you are located outside the USA we offer US Postal Service. UPS and Freight Shipping. Please see the eBay Shipping Tab for Rates and Information. All taxes and duties are the responsibility of the buyer. Items will not be shipped as"gifts" Please check local laws before importing any item. Customs can cause delivery delays that are beyond our control. About Us. At TRIAD Trading Company we specialize in surplus and equipment from the American Manufacturing sector. The majority of our items have come from operating American facilities in financial distress. Plant closures or surplus liquidations. We DO NOT sell insurance salvage. We describe our items to the best of our abilities and try to make sure the descriptions are accurate. Usually, the details are in the photos. Sometimes we may miss an important specification or measurement. Please let us know if you have a question, we will do our best to find the answer for you as quickly as we can. Contact Us. Have a question? Need Help? Please use the eBay messaging system and we will get back with you as soon as possible.
Buy It Now
$24.74 Shipping Condition: New – Open box Location: Berlin, United States Cincinnati Bronze Worm Repair Part#66949This gear is used to adjust the position of the quill on several different horizontal mills.It appears new, unused, ... moreand is in protective dip coating. Today, the cost of a new one is over $1,500.00.Original Cincinnati Part.We SPECIALIZE in parts and tooling for CINCINNATI milling machines!Reference part number (66949) if you have any questions regarding this item.
Buy It Now
Free Shipping Condition: New Location: Lake Villa, United States Our machinery consists of the following: Warner & Swasey Lathes, Bridgeport Milling, Cincinnati OD Grinding between centers. Brown and Sharpe Horizontal ... moreMilling, Boyar Shultz surface grinding, Tapping machinery, Drilling machinery ect….
Buy It Now
Condition: Used Location: Toledo, United States VERTICAL FEEDS. . (32) 1/16 TO 15 IPM. VERTICAL KNEE TRAVEL. 20". MAIN MOTOR. . 30 HORSEPOWER. MODEL. . 4. OVERARM SUPPORT. YES.
Buy It Now
Condition: Used Location: Baltimore, United States Table Travel Cross Feed Range.010″ –. 170″ on all size machines. Vertical: 13″. Model: 20″. Strokes per Minute: 12 – 157 SPM. Horizontal: 24″. FOB Our ... moreBaltimore, MD Warehouse. 5,880 lbs.
Buy It Now
$172.41 Shipping Condition: Used Location: Rocky Hill, United States Kearney & Trecker "Milwaukee" heavy outer arbor support for 1500B Series simplex milling machines. Distance from overarm centerline to spindle centerline ... moreis 9". Proud to carry on the tradition set by Industrial Surplus of Connecticut in its 50 years of service.
Buy It Now
Condition: Used Location: Holland, United States YODER #76378. YODER MACHINERY SALES. #2ML CINCINNATI HORIZONTAL PLAIN MILL MODLE. . 2ML. Performs as expected. May inspect under power. HORSEPOWER MAIN ... moreMOTOR. . 5.
Buy It Now
$35.00 Shipping Condition: Used Location: Berlin, United States 1-1/4" dia. x 30" length from shoulder to nut. Proud to carry on the tradition set by Industrial Surplus of Connecxticut in its 50 years of service.
Buy It Now
Condition: Used Location: Holland, United States 48" Facing Head for a horizontal boring mill. Giddings & Lewis, Cinncinati. 48" Facing head for a horizontal boring mill. Current sleeve will accommodate ... more5-1/2" Spindle. Serial Number 9070. Handle on back turns smoothly.
Buy It Now
$21.99 Shipping Condition: Used Location: Spring Grove, United States
Buy It Now
Condition: Used Location: O Neals, United States Cincinnati Milling Machine Co. Vertical Milling Head, Converts / Updates Horizontal Mills... Vertical head will convert many old horizontal type mills ... moreinto a more versatile vertical configuration... NMTB 40. However, you will need the bull belt/gear/pulley that bolts up to your arbor; I can make them by special order... Please see additional pictures reflecting model #'s & tape measurements... Item is located near Friant, CA. Once paid for it is available for P/U. Thank you for your interest... Freight Logistics; Do your Homework to get your best rate... Dimensions are: 24"x12"x12" inches or takes up 1/4th standard sized pallet; weight is 125lbs or so... Once paid for, I will load it out on your arranged, UPS or truck / trailer free of charge... SOLD AS IS, WHERE IS.
|
|
|
|
NMTB 50 TAPER - 1 1/2" HORIZONTAL MILL STUB ARBOR milling tool holder CINCINNATI
used nmtb 50 taper-horizontal mill arbor- stub Cincinnati USA 1/2B-24-4 1 1/2" x 13 1/2" long 1" drawbar thread please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CINCINNATI HORIZONTAL MILLING ARBOR 7/8"
ONE USED CINCINNATI HORIZONTAL MILLING ARBOR DIA 7/8" ARBOR LENGTH 7-1/2" OAL 19" PILOT BEARING DIA. 23/32" PILOT LENGTH 1-1/2" USED. BUT IN GOOD CONDITION(SIZES MARKED/APPROXIMATE) Shipping via UPS Calculated Based on Location(NO INTERNATIONAL SHIPPING ON THIS ITEM) LOOK AT MY OTHER AUCTIONS; I WILL COMBINE SHIPPING Payment arrangements must be made within three days of end of auction. Visit my eBay Store: THANK YOU from Firemade_Tools Powered by
|
|
|
CNC Horizontal Boring Mill, 5" Cincinnati Gilbert Type J Table Type
Contact Mark Harris at 773-290-1824 or mark@assetexchangeinc.com to find out more about this Great Running Boring Mill! In Chicago ready to be inspected. Machine has been very well maintained and ready for production. Can be loaded onto customer trucks. 5" Cincinnati Gilbert Model J CNC Table Type Horizontal Boring Mill 5" Diameter Spindle. 120" Cross Travel, 84" Vertical, 108" Longitudinal, 50 Taper, Fagor CNC Specifications(Preliminary) Diameter of Spindle: 5" X Axis Cross Travel of Table: 120" Y Axis Vertical Travel of Headstock: 84" W Axis Table Longitudinal Travel" 108" Z-Axis Travel Spindle Out feed: 30" Table Working Surface: 60" x 121" Spindle Speeds: 15-700 RPM(Direct Drive) Feed Range: 0- 150 IPM, Ball Screw Diameter: 2.50" X Axis) 25" Leads, Ball Screw Diameter: ... more2.25" Y/Z Axis) 50" Leads, Spindle Taper: 50 NMTB, Outrigger Support Length: 174" Main Motor Drive: 30 HP, Eqiupped With: Fagor 8030MS CNC Control. Full pendant Control(For Manual Operation) Outrigger Supports, Ball Screws& Independent Drives, Power Draw Bar(Operated From Pendant) Hardened& Ground Ways Bed, Saddle and Vertical, Threading Capable, Telescoping Way Covers, Manuals and Electrical Schematics,
|
|
|
Cincinnati Bed Type Horizontal Mill 330-18 Verci-Power
Cincinnati Bed Type Horizontal Mill 330-18 Verci-Power Cincinnati Bed Type Horizontal Mill Ref.77-327 Model No. 330-18 Verci-Power Serial No. 311031H5U-1 New 1968 This Vercipower is equipped with the Dependant Overarm and Universal Vertical Head. Table Size: 18" x 72" Travels. Longitudinal: 34" Travels. Cross: 12" Travels. Vertical: 22" Maximum Distance Spindle Center to Table Top: 24" Maximum Cutter Diameter under Overarm: 14 3/4" Spindle Speeds: 16- 1.600 RPM Table Feed Rates: 3/8- 90 In/Min Spindle Taper: No. 50 Equipped With: Carrier Counterbalance Automatic Table Cycle Rear Controls Backlash Eliminator Arbor Support Hard Knee Coolant 30 HP Main Motor Drive 230/460/3/60 Approximate Net Weight: 16.000 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT ... moreUS: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crat
|
|
|
Cincinnati 3-Axis CNC Horizontal/Vertical Mill No. 750-20 VerciPower
Cincinnati 3-Axis CNC Horizontal/Vertical Mill No. 750-20 VerciPower Cincinnati 3- A xis CNC Horizontal/Vertical Mill Ref.76 A-166 Model No. 750-20 VerciPower Retrofit Serial No. 9J73H5R-2 This Vercipower mill. Equipped with dependant overarm& universal vertical head, was fully retrofitted in 1998 into a 3- A xis CNC machine by a major aircraft manufacturer. Equipped with extra length table and outboard supports for the saddle. Table Size: 20" x 117" Longitudinal Table Travel: 72" Cross Table Feed: 18" Vertical Head Travel: 24" Maximum Distance Horizontal Spindle Center to Table Top: 26" Maximum Distance Vertical Spindle Nose to Table Top: 31" Spindle Speeds. Variable: 14- 1400 RPM Horizontal& Vertical Spindle Nose Tapers: 50 Overall Machine Size: 10' x 10'4" x 9' High Equipped With: ... moreDependant Overarm& Universal Milling Head Indramat A C Variable Speed Spindle Drive Allen Bradley 9 Series 3- A xis CNC Control Outrigger Saddle Supports A utomatic Lube System A llen Bradley Software Ball Screws Hard Knee Manuals Coolant 50 HP Spindle Drive 460/3/60 Approximate Net Weight: 23.000 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. N
|
|
|
Cincinnati 550-364 Horizontal Production Mill 36"x120"
Cincinnati 550-364 Horizontal Production Mill 36"x120" Cincinnati Horizontal Bed Type Production Mill Ref.76-1119 Model No. 550-364 HyPowermatic R&F Serial No. 3114SPE73-0008 New 1973 Retrofitted with Allen-Bradley SLC-5/01 Programmable Controller Extra High Column and Extra Wide Table Table Size: 36" x 120" Table Travel: Rated 4' Will travel 6'+ Vertical Travel: 36" Maximum Distance Spindle Center to Top of Table: 38" Maximum Distance Spindle Face to Outside Arbor Support: 48" Maximum Cutting Tool Diameter: 20" Spindle Quill Diameter: 10" Cross Quill Adjustment: 8" Spindle Speeds: 20- 800 RPM Feed Rates. Table: 1/4- 70 In/Min Feed Rates. Spindle Carrier: 1- 75 In/Min Spindle Nose Taper: 50 Equipped With: Automatic Spindle Carrier Rise& Fall Outboard Support Brace with Sliding ... moreArbor Support Quick Change Spindle Speed Gearbox. No Pick-off Gears Needed(2) Arbor Supports Coolant 50 HP Spindle Drive 230/460/3/60 Approximate Net Weight: 35.000 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: W
|
|
|
#207MK CINCINNATI MILACRON Horizontal Mill W/ Universal Vertical Head (New 1980)
Preowned CINCINNATI MILACRON Knee-Type Horizontal Milling Machine with Universal Vertical Milling Head. Model: 207MK, S/N: 13J23P1AHE-69(New 1980) Table working surface Range: longitudinal cross vertical(knee) Minimum/Maximum distance. Spindle center to table Horizontal spindle taper Vertical spindle taper(16) Spindle speeds(16) Longitudinal and cross feeds vertical feeds Rapid traverse rate. Longitudinal& cross vertical 13.75" x 59.5" 33.5" 13.72" 18.75" 0"18.75" No. 50 N.S.T. No. 40 N.S.T. 25 to 1.500 R.P.M. 1/2 to 60 I.P.M. 1/4 to 30 I.P.M. 150 I.P.M. 75 I.P.M. Equipped With Universal vertical milling head with#40 N.S.T. mounted on swing-arm type accessory hinge Dual inch/metric reading dials for longitudinal. Cross, and vertical feed handwheels Handwheel with micrometer dial for manual quill adjustment(1) ... moreArbor support Hardened box ways Automatic backlash eliminator Power rapid traverse. All directions Dual inch/metric reading dials for longitudinal. Cross, and vertical feed handwheels Coolant system with 1/3 H.P. pump motor 5.5 H.P. 3/60/230-460 volt feed motor 7.5 H.P. 3/60/230-460 volt spindle drive motor and electrical controls Machine is wired for 460 volt operation. Approximate Weight: 6.150 Lbs. Approximate Dimensions: 68" L-R x 77" F-B x 67" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
CINCINNATI HYDRO MATIC HORIZONTAL MILLING MACHINE
Call for more details- 714 658 5390 OCM Posted with
|
|
|
NMTB 50 TAPER 1 1/2 HORIZONTAL MILL ARBOR milling machine tool holder CINCINNATI
used nmtb 50 taper- horizontal mill arbor Cincinnati Milicron 1 1/2" x 32 3/4" long 1" drawbar thread sold as pictured please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Cincinnati Horizontal Milling Machine No. 6 Dual Power
Cincinnati Horizontal Milling Machine No. 6 Dual Power Cincinnati Horizontal Milling Machine Ref.77-351 Model No. 6 Dual Power Serial No. 4J6P5C-5 Table Size: 20" x 104-1/2" Table Travels. Longitudinal: 60" Table Travels. Cross: 14" Table Travels. Vertical. Knee: 20" Spindle Speeds: 14- 1400 RPM Table Feed Rates: 3/8- 90 In/Min Rapid Traverse Rate: 150 In/Min Spindle Nose Taper: 50 Equipped With: Automatic Table Cycle Backlash Eliminator Arbor Support Power Shifting of Speeds& Feeds Coolant 50 HP Main Drive 220/440/3/60 Approximate Net Weight: 16.000 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin ... moreat 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
vertical mill head for Horizontal mill maybe Cincinnati K&T B&S or other
Up for sale as the basement cleanout continues: A Cincinnati vertical milling head for a horizontal mill. Don’t know what mill this will fit. It has a MT4 spindle. With a collet holder and 6 collets included in the sale. The drive shaft is a B&S#10. With some slight rust– should clean up well. Drive gear looks to be in good shape. Mates well with the driven gear. Ratio appears to be 1:1(no speed reduction or increase) It is. As you can see, missing a bearing cover, and a couple bolts look not to be original. Measures 16 ½ inch from the face of the mounting plate to the end of the support rod. I am not sure if the current base‘home plate’ shape or original or added to the‘round’ base. Length of spindle is 8 3/8 inch. The bolt spacing(not circle. But bolt to bolt distance) for the three bolts on the round mount plate is 5 5/8 inches. ... moreThe bolt spacing on the‘home plate’ plate is 7.5” between bolts on the square end. And 8 inches between bolts along the angle sides. The gear drive meshes up well. And spindle turns well, but I have no way to drive the head, and do not any solid information on the condition of bearings or gears. The previous owner was said to have been using it. But again, no idea of noise/runout/etc. I actually bought this to modify as a telescope mount. But have too many projects, not enough time. If you can tell me any model numbers or compatibility information. Please let me know. Please ask any questions prior to bidding.
|
|
|
Cincinnati Horizontal Mill Overarm Arbor Support 6"wide Dovetail 2-3/4" Hole
Welcome! Up for sale is a Cincinnati Horizontal Mill Overarm Arbor Support 6" wide Dovetail 2-3/4" Hole. Model 4J23U5J-1. P/N 127809. Used in good condition. Feel free to email any questions! SCT2059
|
|
|
Cincinnati Cinel 60 Model 205 - 12 Universal Horizontal Milling Machine W DRO
SPECIFICATIONS AND FEATURES: Machine Size: 69" Left to Right x 65" Front to Back x 61" Height Floor Space: 96" Left to Right x 65" Front to Back x 61" Height Approx. Weight: 5.220 lbs Spindle Nose Taper: 50 AS Table Size: 12" Width x 54 ½" Length T-Slot size: 11/16" x 1 ¼" x ½" Table travel: 28" Saddle travel: 10" Knee Travel: 16" Swivel Table Distance Center of Spindle to Top of Table: 0" Min. to 16.5" Max. Horizontal Spindle Speeds(16) 25 to 1.500 RPM Feeds(16) Table: ¼" to 30 IPM Cross: ¼" to 30 IPM Knee: 1/8" to 15 IPM Rapid Traverse Reversing Spindle Hardened ways. ELECTRICAL: 5 HP Motor. Wired 3 Phase, 60 Cycle, 460 volts, 60 Hz Digital Read Out(DRO) 3 axis. 0002 resolution Electrical Panel mounted internally. EQUIPPED ... moreWITH: 8" Arbor Table Travel Trip Dogs on Table. Saddle& Knee Draw Bar for Horizontal Spindle Shell Mill Holder Coolant System Type: Flood Rear Controls Hydraulic Knee Powerr Assistt COMMENTS: Condition: Remanufacture. OEM tolerances or better. Ideal for slab milling and generating slots. Step milling, boring, taper milling, etc.
|
|
|
Horizontal Hand Mill ~ US Machine Tool Co., Cincinnati OH #1
Horizontal Hand Mill ~ US Machine Tool Co. Cincinnati OH#1 Up for auction is US Machine Tool Co. 1 Horizontal Hand Mill. It is in very good working condition. And is also in good cosmetic condition. There is a small chip out of the left side on one of the T-Slots that you can see in the pictures. Included are a single and three phase motors. Now for the bad news. The mill is in my basement. When I bought it I dismantled it and wheeled the main casting down the stairs on a appliance hand truck. You will have to do the same thing, but in reverse, and without the assistance of gravity. I can offer tools and advise, but you need to bring some very big friends. To make it worth the effort I am going to list this very cheap. for more great items! High bidder to pay for shipping. PayPal is the only payment method accepted by eBay. Payment is expected ... morewithin 3 days of auction end. We don't add a handling fee. Though at times we may add a small fee based on the shipping materials we use to ship(purchased boxes, mailers) We always try to recycle first! Items will be shipped within 24 hours of receipt of payment. Excluding weekends and holidays. Please check out our other auction items. If you would like to bid on more than one item. We are happy to combine shipments when at all possible. Important! According to the postal service web site: The USPS does not guarantee the delivery of media mail within a specified time period. Media mail might receive deferred service. txzj pxzj2492 txzj63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-14041c43d4d-0xee-
|
|
|
Cincinnati 307-14 Horizontal/Universal Milling Machine; Vertical Head-DRO-Vise
A local company had recently closed one of its research and development machine shops. The equipment that has not been transferred to one of their other divisions will be released for disposition and will be offered for sale. The sale is final so please feel free to ask any questions that you might have. Offered here is a Cincinnati#307-14 Horizontal Milling Machine. I was told that the machine was purchased new in 1969 and it does not appear to have ever been used in a production environment. It is equipped with a universal table. Vertical Head overarm, 3 Axis DRO, and Arbor Support. Also included is the original Cincinnati Vise. I had seen the machine under power and everything looked to be in nice operating order. It is located in southern New Jersey, zip 08081 and can be loaded onto a truck at no cost. Inspection is welcome by appointment.
|
|
|
Vertical/horizontal cincinnati milling machine...220 or 440 volt,
We have a nice working Cincinnati mill.Its wired for 440 volt right now but can be run on 220.10 hp 3 phase motor.runs smooth.13.2 amp. X travel is approx. 35 inches.Y travel approx. 14 inches and Z travel is approx. 18 inches.3 dimensional power feed.Table size is 83x21 inches. Tables is in very good condition.This mill is built very well.
|
|
|
cincinnati horizontal mill milling machine arbor & shell cutter spacers collars
Good used cincinnati horizontal milling machine arbor 1 1/4" diameter and has many shell cutter spacers. 5 taper. Take a look at my other items. Thank you.
|
|
|
Cincinnati Horizontal Milling Machine 8"x27" Power Feed 14ea Arbors Tooling
Used Cincinnati Horizontal milling machine 8"X27" table with 6" vise. This machine runs fine all functions work including power feed on the table. Powered by a 5HP 220v 3 phase motor with disconnect and drum switch. Includes 7ea misc. change gear. 14ea 50 taper arbors, 180 lbs of cutters all sizes, and a box of spacer collars. Some of the tooling has minor rust but all oiled. This machine is flat belt drive, the tensioner had been repaired see photo. Machine weighs about 2500 lbs, has coolant pump that was not tested. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction ... moremay be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with eBay Mobile. Posted with
|
|
|
Cincinnati NMTB-50 Taper Tool Holder 2" Keyed Horizontal Mill Arbor
Welcome! Up for sale is a Cincinnati NMTB-50 Taper Tool Holder 2" Keyed Horizontal Mill Arbor. It has a 2" dia x 3-3/4" long arbor section with a keyway. Then there is a 1" dia x 2" long straight shaft section(no key) with a 1-1/2" OD spacer sleeve. I would imagine this section is for arbor support. Used in good condition. Feel free to email any questions! SCT2647
|
|
|
65.25" Tbl 10HP Spdl Cincinnati 310-14 HORIZONTAL MILL, 14" x 65" Tbl, Independe
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 65.25" Tbl 10HP Spdl Cincinnati 310-14 HORIZONTAL MILL. 14" x 65" Tbl, Independe Ref# 140133 iammdna XMILLH CINCINNATI-MILACRON PLAIN HORIZONTAL MILL MODEL: 310-14. S/N: 11A23P5ZE-1, NEW: ... more1972 SPECIFICATIONS: WORKING SURFACE OF TABLE. 65-1/4" X 14" LONGITUDINAL TRAVEL OF TABLE. 34" CROSS TRAVEL OF TABLE. 12" VERTICAL TRAVEL OF KNEE. 20" DISTANCE SPINDLE TO TABLE. 0" MIN. 20" MAX. SPINDLE TAPER. 50 SPINDLE SPEED RANGE(24) 18- 1800 RPM TABLE FEEDS LONGITUDINAL& CROSS(16) 1/2- 60 IPM VERTICAL KNEE FEEDS. 1/2 OF LONG. CROSS POWER RAPID TRAVERSE FOR LONG& CROSS. 150 IPM POWER RAPID TRAVERSE FOR VERTICAL KNEE. 75 IPM APPROXIMATE WEIGHT. 10.000 LBS EQUIPPED WITH: ARBOR SUPPORT 10 HP DRIVE MOTOR* EXCELLENT CONDITION* INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE* Machine Location: HARRISON. NJ Click Here For More Cincinnati Machines Click Here For More Mills- HORIZONTAL MILLING MACHINES w/ PLAIN TABLE(s) Questions about this Machine? Call David at(800) 873-6224 ext 7570 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one o
|
|
|
Cincinnati Milacron T20 CNC Horizontal Machining Center BEST OFFER
Cincinnati Milacron CNC Horizontal Machining Center- Under power and in operation- Model: T20 Acramatic 950 VER 2 CNC Controller Specifications: 4-Axis CNC Horizontal Machining Center; 3-Linear Axis with 32" of Travel 1-360 degree Rotary Axis in 1 degree Increments 3.000 Lbs. Load Capacity 6.000 RPM Spindle 50 Taper Spindle 90 Tool Capacity Buyer is responsible for all disconnects. Rigging and loading charges. Quoted by a local professional machinery moving company at $5300. This can be paid directly to them for their services. Contact Justin at 503.464.6013 with any questions. The unit is located in Searcy. AR. WORLDWIDE SHIPPING AND PACKAGING COSTS TO BE DETERMINED BY DESTINATION. Please read the terms and conditions below so that you understand how all our items are sold. Payment Options: ALL PAYMENTS ARE EXPECTED WITHIN 48 HOURS ... moreOF AUCTION CLOSE. WE UNDERSTAND THAT THERE ARE EXCEPTIONS. BUT COMMUNICATION IS KEY. PLEASE DO NOT BID IF YOU CANNOT PAY FOR THIS ITEM IN A TIMELY MANNER. Shipping Options: Smaller Items: Minimum shipping charge of $15.00. Items over $500. Must be insured at the buyers expense of $0.50, per $100. Freight Items: The buyer is responsible for coordinating shipment and is responsible for all freight and rigging(if required) costs. We can arrange freight shipments. You will be billed exactly as quoted by my freight forward. With no mark-up, however at times this may be more than the cost of the actual item. Please ask for a quote prior to bidding, so there are no surprises. Freight items typically require payment by bank wire transfer or certified funds, since shipments and delivery confirmations typically do not conform with Paypal requirements. Local Pick-Ups: This option is available on many auctions. However we are not always on-site where the item is located. Please inquire before bidding. Typically there will be no additional charge for a local pick-up. However some larger items may require an additional rigging fee upon pick-up. Terms and Conditions: Most items that we sell are
|
|
|
CINCINNATI HORIZONTAL MILLING ARBOR 1.250 DIA.
CINCINNATI IS STAMPED ON THE TAPER- 23 1/4' OVERALL LENGTH.15 1/4' ARBOR LENGTH, COMES WITH 11 COLLARS, 1.250 ARBOR DIA. DRAW BAR THREAD IS 5/8-11-LARGE DIA OF TAPER IS 1.290-SMALL DIA OF TAPER IS 1.060- TAPER LENGTH IS 5 5/8'
|
|
|
ROUSE MANUAL HORIZONTAL MILLING MACHINE WITH 6 CINCINNATI COLLETS
aims ROUSE MANUAL HORIZONTAL MILLING MACHINE WITH 6 CINCINNATI COLLETS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Rouse. This is a Manual Horizontal Milling Machine in Good. Working Condition. Specifications: Collet Capacities: 1/8" 2) 3/16" 1/4" 3/8" 7/16" Working speed: 1.725 rpm. Voltage: 115 Volts. Amps: 6.8. HP: 1/2. Vise Jaw Width: 2-1/2" Vise Jaw Height: 1-1/4" Vise Capacity: 1-3/4" Overall Dimensions: 9-1/2" x 18" x 21" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a ... moredollar with no reserve. ROUSE MANUAL HORIZONTAL MILLING MACHINE WITH 6 CINCINNATI COLLETS ROUSE MANUAL HORIZONTAL MILLING MACHINE WITH 6 CINCINNATI COLLETS ROUSE MANUAL HORIZONTAL MILLING MACHINE WITH 6 CINCINNATI COLLETS ROUSE MANUAL HORIZONTAL MILLING MACHINE WITH 6 CINCINNATI COLLETS ROUSE MANUAL HORIZONTAL MILLING MACHINE WITH 6 CINCINNATI COLLETS ROUSE MANUAL HORIZONTAL MILLING MACHINE WITH 6 CINCINNATI COLLETS Reliable Tool Inc. c 2011 | Powered by
|
|
|
CINCINNATI MILL OVERARM SUPPORT ARBOR NO. 2 HORIZONTAL 2.125 BORE USED NICE
This is a good used overarm support Cincinnati Milling Machine Co. USA dovetail is approx 4 3/8" at widest point approx 6 1/8" from dovetail to center of bushing bushing 2.125" ID bore has some lines in it but overall good The locking ring has three pretty good size punches around it- does not appear to affect operation. I have never used it but it appears to be all there. U.S. addresses only on this please.
|
|
|
Arbor Support - Cincinnati #2MH Horizontal
Cincinnatti 2 MH Universal milling machine arbor support. This auction is for the arbor support only. Machine uses 50 taper tooling. I am piecing out this machine. Which was just pulled out of service in running condition. Please ask any questions before bidding. Thanks.
|
|
|
Cincinnati Horizontal & Vertical Milling Machine 14x62 Table Wow Side Controls
Large Cincinnati Horizontal& Vertical Milling Machine. Serial Number 2J3P5A-33. 14" x 62" Table with rare front and side controls for XY&Z movements, rapid traverse, Comes with complete vertical Head attachment. Not Shown in Photos You will also get 2 Arbor supports, Arbors, Boring Head and some other Spindle holders, Vise as seen in Photos, Digital Readout not tested, Runs Nice, Selling as You see it. Local pickup, Free loading on Buyers truck from Pa zip code 18966. Buyer pays all shipping costs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14537496b44-0x110-
|
|
|
2000 Cincinnati Gilbert Horizontal Boring Mill 72" X 48" X 96" 4" Spindle Rema
Cincinnati Gilbert R& D CNC Machining 3506 M40 Hamilton. MI Ph. 269-751-4171 HBM Table Type w/ 4in” Spindle• Serial Number: 4C 225• Remanufactured in 2000 by Cincinnati Gilbert Machine Tool Co. 4” Spindle; 1610 RPM• 20 hp• Rotary Axis capable• Autocon Dynapath 50 Control• Hardened ways• Ball Screws• Variable 3 Speed Head• Siemens Drives• 50 Taper• Power draw bar• Travels: X=72• Y= 48in. Z=29• W= 96in. A(rotary) Axis ready• 200 IPM Rapid/Feed• Rotary Table Available(12” Nikkin) Turmoil hydraulic chilling unit• Centralized Way Lube• Teleflex Box Waycovers We can load mill, but shipping needs to be arranged by purchaser. Mill is set up and ready for inspection.
|
|
|
Cincinnati Cintimill 205 Horizontal Milling Machine w/ coolant and rapids, NICE!
CINCINNATI 205 CINTIMILL HORIZONTAL MILLING MACHINE I know it gets a little old when I say nicest looking or best running but I swear to you this day it's the truth. This is one of the nicest running cleanest horizontal mills we've ever had here! check out the video. it comes with the milling cutter in the spindle. The horizontal mill arbor and spacers, the end mill holder as shown in the pictures. This is pretty much ready to go! Link to video of this mill running. WE'RE A SMALL SALES OUTFIT BENT ON SELLING GOOD USED MACHINERY AT A FAIR PRICE. JUST CHECK OUT MY PRICES VERSES MY COMPETITION. WE DON'T HAVE 15000 FEEDBACKS, LAST CHECK I THINK I'M AROUND 725 OR SO. WE'VE EARNED THEM ONE AT A TIME. CHECK OUT OUR FEEDBACKS, YOU'LL SEE TIME AND TIME AGAIN THAT I DESCRIBE MY EQUIPMENT WELL AND GET IT THERE SAFELY. VIDEO ... morePROMO OF LEE'S MACHINERY WE'RE A FOUR MAN SHOP. LEE(MY DAD) HAS BEEN DOING THIS FOR 50 YEARS AND IS PRETTY MUCH RETIRED, MIKE(ME) WHO'S BEEN DOING THIS FOR 23+ YEARS, MEL 10YEARS AND DENVER(MY SON) WHO BEEN HERE FOR A LITTLE OVER 3 YEARS NOW. NICE EQUIPMENT AT A FAIR PRICE AND WE GET IT THERE IN ONE PIECE. WE HAVE OVER 25 BRIDGEPORT OR BRIDGEPORT TYPE MILLING MACHINES IN STOCK! WE ALSO HAVE LATHES, GRINDERS, BANDSAWS, HONES, DRILL PRESSES, TOOLING,ETC. I DON'T LIKE USING THE AUTOMATIC FREIGHT CALCULATOR. I LIKE TO PUT THE TRUCKING COMPANIES UP AGAINST EACH OTHER SO I GET SOME GOOD COMPETITIVE PRICES. JUST E-MAIL ME WITH YOUR ZIPCODE AND LET ME KNOW IF YOU CAN UNLOAD ON YOUR END VIA- LIFT TRUCK, OR LOADING DOCK. WE WILL LOAD ONTO YOUR TRUCK AT OUR LOCATION UNSKIDDED AT NO ADDITIONAL CHARGE, WE WILL CHARGE $ 100 FOR A CUSTOME SKID OR IF IT NEEDS TO BE FULLY ENCLOSED IN A CRATE WE'LL CHARGE $250 FOR A SKID AND CRATE.
|
|
|
Cincinnati #2 horizontal milling machine outboard arbor support
used Cincinnati#2 horizontal milling machine outboard arbor support. in decent shape dove tail is 6 3/16" long side. 4 3/16" short side and 1 3/16 tall. there is sketch of dove tail, last picture. This part can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Or shipped. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be ... morestored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner.
|
|
|
Cincinnati Model 3MI Horizontal & Vertical Milling Machine with Dual Motors
Cincinnati Model 3MI Horizontal/ Vertical Milling Machine. Serial No. 2J3P5E-10. 50 Taper Spindles. Has Front and Side Controls for XY& Z Movement. Table Size is 14" x 70 1/2" Weight of Machine is around 9300 lbs. Has 1 Arbor Support. Has 7 Arbors/Holders and 2 Carbide Insert Cutters(No Inserts) Runs good. Vertical Motor Contact Sticks sometimes in lower speeds. Main Motor is 7 1/2 HP and Vertical Motor is 3 HP. Coolant pump has been cleaned and works well. I have a.PDF version of the Service Manual for this Machine. Machine is powered up and can be checked out by appointment. Machine must be moved by a Rigger at the buyers expense. Local Pickup Only at 85719 Zip.
|
|
|
Horizontal milling machine arbor support overarm ?Cincinnati?
Spring Cleaning Overarm Support I will try and post some dimensions when I get a chance. Buyer pays shipping
|
|
|
6.5" x 24" Cincinnati Model 0-8 CNC Horizontal Production Mill (Rise & Fall)
800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 5170- Cincinnati CNC Horizontal Production Mill(Rise& Fall) Manufacturer: Cincinnati Model: 0-8 S/N: 5FAT- 5C60- 5 Year: Specifications: Table Size 6.5" x 24" Longitudinal Table Travel 8" Vertical Movement Of Spindle- Hand 4 1/2" Vertical Movement Of Spindle- Power 2 1/2" Distance Centerline Of Spindle To Table 1 1/2" 8 1/2" Distance Centerline Of Table To Column Face 5 1/4" Max. Distance Spindle To Arbor Support 9 3/4" Spindle Speeds 80- 3.000 RPM Spindle Nose#40 Feeds Programmable Dimensions(L x W x H) 72" x 72" x 80" Weight 1.800 Lbs. Equipped With: Anilam 3200MK. 2 Axis CNC Control Automatic Rise& Fall Spindle Walker 6" x 10" Permanent Magnetic Chuck 2- Arbor Supports Arbor Auto ... moreLube System Coolant System Horsepower: 1 1/2 Location: Huntington Park.CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA M
|
|
|
Cincinnati No.3 Universal Horizontal Milling Machine (25784)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number:25784. CINCINNATI HORIZONTAL MILLING MACHINE MODEL: No. 3 SERIAL NUMBER: 3J3P5A-2 GENERAL SPECIFICATIONS Table Working Surface: 15-1/4" x 62-1/2" Range. Longitudinal: 34" Range. Cross: 12" Range. Vertical: 20" Maximum Distance From C/L Of Spindle To Top Of Table: 20-7/16" Spindle Taper: No.50 Spindle Speeds: 16 To 1600 RPM EQUIPPED WITH Motorized Universal Overarm: 50 Taper. 400-1030 RPM Arbor Support Casting Approximate Weight: 10.000 Lbs. F.O.B. Holland. Ohio 43528*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. ... moreContact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictu
|
|
|
CINCINNATI NMTB50 1-1/2 HORIZONTAL MILLING MACHINE ARBOR B-24-4
CINCINNATI NMTB50 1-1/2 HORIZONTAL MILLING MACHINE ARBOR B-24-4 24" LENGTH SHOLDER TO NUT
|
|
|
Cincinnati Gilbert Horizontal Boring Mill 3-1/2"spindle70"+- vert. from table
CINCINNATI GILBERT 3 1/2" BORING MILL WITH RIGHT ANGLE PLATES AND TAILSTOCK 53X91" TABLE THIS MACHINE IS AVAILBLE FOR INSPECTION MON-FRI OR BY APPOINTMENT. REMOVAL BY THE END OF AUGUST AT THE LATEST. BUYER RESPONSIBLE FOR ALL RIGGING CHARGES. RIGGER TO BE INSURED TO ENTER BUILDING. PLEASE CHECK OUT THE YOU-TUBE VIDS TO SEE THIS MACHINE RUNNING. THE OWNER WAS A BIT RUSTY ON THE OPERATION OF MACHINE BUT I THINK YOU'LL BE ABLE TO SEE IT RUN IS MOST SPEEDS AND FEEDS. THE MACHINE IS LOCATED NEAR ASHTABULA OHIO(NORTHEAST OF CLEAVELAND) MACHINE IS UNDER POWER FOR INSPECTION LINK TO YOU-TUBE VIDEOS WE PREFER WIRE TRANSFERS FOR TRANSACTIONS OF THIS SIZE. COMPANY CHECK OK AS LONG AS YOU DON'T MIND WAITING FOR IT TO CLEAR. CALL ME OR E-MAIL ME WITH ANY QUESTIONS 440-259-2222 ASK FOR MIKE
|
|
|
Cincinnati #2 horizontal milling machine vise 12" wide .looks to be original
Used original? Cincinnati#2 horizontal milling machine 12" wide. 11' deep, 2' tall jaws. In decent condition in working order. Has normal dings and scrapes. It weighs about 245lbs. Can be shipped freight for a couple of hundred dollars. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a freight shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So ... moreplease ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with
|
|
|
Cincinnati #2 Vertical Head fits Horizontal milling machine Nmtb 50 With Drive
Used Cincinnati#2 horizontal milling machine vertical head attachment with draw bar. And nmtb 50 drive adaptor gear. Head is in decent used condition spins smooth, drive gears look good. Came from a machine with the dove tail overarm. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a freight shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. ... moreDue to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with
|
|
|
Cincinnati NMTB50 arbor horizontal mill 1'' dia 31'' leg
used Cincinnati NMTB50 arbor for horizontal milling arbor 1' dia. 31' overall length. 12 spacers and jam nut included plus the cutting bit. all spacers are not equal dia. in working order. This part can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Or shipped. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free ... morefor 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1478eb1dfd9-0x110-
|
|
|
Vertical drill - mill head from old Cincinnati horizontal milling machine
This head came on my old Cincinnati#2 horizontal miller when I got it some 20 years ago. The auction is for the head as shown in the first picture. The last two photos show how it was installed. The milling machine has been scrapped, it is not included here. Not much info on the head, two brass plates, on stamped A101, the other"Timken bearing equipped" The end of the spindle has a#3 morse taper, the drawbar hold this chuck in tight. The chuck has a 3/4" straight bore. Both drawbar& chuck are included. The large collar is 4 1/4" bore, it fir on the horizontal arm of the miller as shown. There are degree markings all around the collar. The motor is 3 phase, 1/2 hp, 230/460 volt. It is 1140 rpm. This unit always worked fine for me, I used it mostly as a drill press, I did a little light milling, but the table on the ... moremiller was so shot it was hard to get accuracy. As this sits, it's about 100 pounds. I will separate the motor from it and send it ups ground in two boxes. If you don't want the 3 phase motor, let me know after the auction ends, the shipping will go down some for sure. If you have any questions, please ask, I will do my best for answers. The shipping rate shown is for ONE 50 pound box, if you want the motor& the head, this will be doubled for two boxes. I will send at cost, I never tack on extra fees. Local pickup is of course free.
|
|
|
Series C CINCINNATI GILBERT 4" Table-Type Horizontal Boring Mill (New 1986)
Preowned 4" CINCINNATI GILBERT Table-Type Horizontal Boring Mill. Series C, S/N 4C211(New 1986) Diameter of spindle Taper in spindle Spindle traverse(Z) Headstock. Vertical travel(Y) Table working surface Table cross travel(X) Bed length Longitudinal travel of the saddle on the bed(W) Saddle width Width across saddle supports(33) Spindle speeds. Infinitely variable in 3 ranges Number of milling feeds to table. Head, saddle, and spindle Spindle and saddle feed rate Head and table feed rate Rapid traverse rate for spindle& saddle Rapid traverse rate for head& table 4" 50 NMTB with power tool lock 29" 48" 48" x 72" 60" 120" 70" 36" 120" 7 to 1.510 R.P.M. infinitely variable.050 to 100 I.P.M. 500 to 200 I.P.M. 100 I.P.M. 200 I.P.M. Equipped With To view a video of this machine under ... morepower copy& paste the following link into your internet browser: Ball screws and DC servo drive motor on all axes All gear drive to the spindle with head mounted drive motor Dual ball screw spindle feed Power shifting of the the feeds and speeds on the operator's control pendant through direct reading preselect rotary dials. The milling feed rate dial directly controls the milling feed motor. Flame hardened and ground bed and saddle ways Power rapid traverse. All directions Power table and saddle way lubrication Telescopic way covers on the saddle Hardened. In-the-floor auxilliary saddle supports#LH41 SONY three-axis digital readout for W. X, Y axes DC milling feed and rapid traverse motors 20 H.P. 3/60/220-440 volt DC spindle drive motor and free-standing electrical control cabinet Machine is wired for 3/60/460 volt AC electrical input. Approximate Weight: 45.000 Lbs. We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
CINCINNATI #4 HORIZONTAL MILLING MACHINE ARBOR SUPPORT w/ Bushing
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for sale is this CINCINNATI#4 HORIZONTAL MILLING MACHINE ARBOR SUPPORT w/ Bushing. Item is in good shape and is sold as is. DiD i mention sold as is. Item was removed from a working machine.
|
|
|
Cincinnati CNC Horizontal Milling Machine Cim-x Changer Series 30
Specs X Axis- 50" Y Axis- 30" Z Axis- 28" Rotary Table- 30" Diameter, 72 indexable positions, 5 degree increments, Spindle speed- 29 to 3000 RPMs, Tool holder type- NAS-970C-16, Feed Rate- 0 to 200 IPM, Spindle- 10 Horsepower, Machine weight- 30.000 lb(approximate) This machine has Fanuc drive motors with general numeric controls. It has been lightly used for the past 15 years for manufacturing 96" diameter saw blades for sawmills and paper mills. It is currently operated at our shop. But we are no longer machining as we are concentrating on grinding. This is a great buy on a large capacity machining center with a lot of tool holders. The fixture can be removed if you don't want it. Machine is sold"as is" Non-returnable) Buyer understands that a competent maintenance/electrician must be on hand for installation ... moreand startup as moving machines with transport vibration tends to loosen connections. Payment to be company or certified check that must clear prior to removal. Buyer must pay freight and rigging. We will assist in rigging and shipping arrangements if needed.
|
|
|
Cincinnati Horizontal Production Mill w/Rise & Fall 105-122.5
Cincinnati Horizontal Production Mill W/ Rise& Fall Ref.76-1134 Model No. 105-122.5 R& F Powermatic Serial No. 31122H5W-8 New 1970 Table Size: 12” x 60” Table Travel: 30” Vertical Adjustment of Spindle Carrier: 12” Max. Dist. Spindle Center to Table Top: 13 1/4” Cross Quill Adjustment: 3” Diameter of Quill: 6” Spindle Speeds: 50- 2000 RPM Table Feeds: 1- 40 In/Min Approx. Machine weight: 5.500 LBS No. 50 Taper Spindle. Equipped With: Automatic Spindle Carrier Rise& Fall Hydraulic Spindle Carrier Clamp Speed& Feed Change Gears Cam Roller Valve Arbor Support Coolant. 5 HP Spindle Drive 230/460/3/60 1.5 HP Feed Motor. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Cincinnati 10" universal Dividing Head power ready 6" chuck horizontal mill
Nice used Cincinnati dividing head. This is capable of being power driven from the making machine. It is in excellent condition. Everything moves smoothly as it should. It has a nice 6" 3 jaw US made chuck mounted on it. Chuck key is included. It weighs right at 150 lbs. So I am offering free local pickup, or I will band it to a pallet and drop it off at a local freight terminal. Buyer may arrange shipping, or contact me for a freight quote.
|
|
|
Cincinnati #50 Taper 1 1/4" Horizontal Milling Machine Arbor, Genuine Cincinnati
Genuine Cincinnati Model 4079#50 Taper 1 1/4" Horizontal Milling Machine Arbor. Length from face of holder to Nut end is 20 1/2" Comes with all Spacers as seen in Photo. Real nice condition. Remember Genuine Cincinnati USA.
|
|
|
Cincinnati 2MH Horizontal Mill Milling Machine w/ Right Angle Vertical Head
Up for sale is a Cincinnati 2MH Horizontal Mill Milling Machine w/ Right Angle Vertical Head. This mill package includes several arbors and arbor supports. A right angle head, and the original manuals. It holds NMTB-50 holders and the vertical head holds NMTB-40 holders. Feel free to email any questions! LOCAL PICKUP ONLY* We can accommodate customer-arranged freight. SCT150102-10*
|
|
|
Nice! Cincinnati Vertical/ Horizontal Milling Machine Arbor Support` 1" Arbor
Cincinnati Arbor Support 306187F Overall Size: 9.25" Top 3.75" Wide 9" Top to Bottom Dovetail on machine: Approx: 5-3/4" width at Bottom. 4-5/8" width at Top Dovetails at 45 degrees The arbor will tighten down 1/16" to 1/8" or a little more. Bushing Hole Size: 1" Keyway Size: 1/4" The item belongs to a friend. I am only helping them sell items from their business. Please excuse me if I am unable to answer any technical answers. Shipping: The shipping weight is 30 lbs. I will ship free in the United States in the 48 States. I will ship Internationally. International rated will vary. Local pickup is OK. I will ship economy mail. Buyer will pay for extra services. Free shipping is with full price offer only. Payment. Ebay accepted payments. Cash in person, money order, or paypal. Returns: Buyer has ... more14 Days to return item after receipt. Item must be returned in condition as sold. 20% restocking fee will apply. Buyer pays return shipping. Buyer will purchase item AS-IS-AS-IT-IS and all Sales Are Final after the return period is over.
|
|
|
Cincinnati No. 550-20 Plain Dual-Power Dial-Type Horizontal Mill
Liberty Machinery Company You are looking at: Used- Cincinnati No. 550-20 Plain Dual-Power Dial-Type Horizontal Mill w/ Independent Overarm Spindle& Swivel Milling Head* Serial No. 3J5P1V-4-R-83 New- 1983 LMC#37489 SPECIFICATIONS: Working Surface 94-1/2" x 20" T-Slots(3) 13/16" Distance between T-Slots 4-1/4" Longitudinal Travel 50" Cross Travel 16" Vertical Travel 20" Centerline Spindle to Top of Table 3/4" 20-3/4" Face Column to Braces- Maximum 40-1/4" Spindle No. 50 Diameter of Nose 5-1/16" Diameter of Hole for Draw-in Bolt 1-1/8" Speeds(24) 14- 1.400 RPM Longitudinal Feeds(32) 3/8- 90 IPM Cross Feeds(32) 3/8- 90 IPM Vertical Feeds(32) 3/32- 22-1/2 IPM Longitudinal Rapid Traverse 150 IPM Cross Rapid Traverse 150 IPM Vertical Rapid Traverse 37-1/2 IPM Spindle Drive 50 HP Electrics ... more460V/3Ph/60Hz Floorspace Required 12' x 14' Approximate Height 8' Approximate Weight 18.000 Lbs. EQUIPPED WITH: Independent Overhead Spindle with Heavy Duty Vertical Milling Attachment 24" Circular Power Feed Milling Table Arbor& Arbor Support Automatic Backlash Eliminator Automatic Table Feed Cycles Coolant Pump(In Base) Machine Documentation*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will email additional photos as requested. Buyer is responsible for all freight and shipping costs. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up from our selling location within 21 days of"award of sale" Items remaining on our premises after 21 days will be subj
|
|
 |