|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Middlebury, United States Model: Cinova 80 307-14. Size: Length: 70 in. Width: 78 in. Height: 72 in. Unless otherwise specifically agreed to in writing by. 7.5 HP Motor. Prefer ... moreto pick it up yourself?. 50 Taper Spindle.
Buy It Now
Condition: Used Location: Floresville, United States CINOVA 80-205-12. VERTICAL FEEDS. . VERTICAL HEAD TRAVEL. VERTICAL KNEE TRAVEL. SNAP LOCKS. . Machine sold where is as is. SPINDLE SPEEDS. .
Buy It Now
Condition: Used Location: Toledo, United States VERTICAL FEEDS. . (24) 3/16 TO 30 IPM. VERTICAL KNEE TRAVEL. VERTICAL HEAD TRAVEL. MOTOR, HORSEPOWER. . 5. TAPER IN SPINDLE. 50 NS. DEPTH OF THROAT. .
Buy It Now
Condition: Used Location: United States Cincinnati Milacron Arrow 500 CNC Vertical Machining Center New 1997 EQUIPPED WITH: Acramatic 2100 CNC Control w/ Color CRT(P.C. Based) Hand Held Pendent. ... moreMax Program Storage, Tool Cycle Timer and Counter, Fanuc 0 Translation, MC Extended Cycles. 3-1/2" Floppy, Rigid Tapping, 21 Station Automatic Tool Changer, Full Coolant Enclosure, Keyboard, Spindle Load Meter, Chip and Coolant System. CATALOGUE SPECIFICATIONS: X Travel(Longitudinal) 20" Y Travel(Cross) 20" Z Travel(Vertical) 20" Table Working Surface. 27.5"x20.5" Table Work Load Capacity. 770 LBS Spindle Horsepower. 10 HP Spindle Speeds. 30-6000 RPM Spindle Taper. 40 CAT Feed Rates. X& Y. 0.1 to 472 IPM Feed Rate. Z. 0.1 to 393 IPM Rapid Traverse X& Y. 787 IPM Rapid Traverse Z. 787 IPM Tool Storage Capacity. 21 Approximate Dimensions. 79" x 87" Approximate Height. 106" Approximate Weight. 8.820 LBS
Buy It Now
Condition: Used Location: Holland, United States MODEL. . 2M. VERTICAL KNEE TRAVEL. 13". We load for free. May inspect under power. TAPER IN SPINDLE. . #50. MAIN MOTOR. . 5 HORSEPOWER.
Buy It Now
Condition: Used Location: Cincinnati, United States Vertical Knee Travel 16". (32) Vertical Head Feeds, Range 3/16 to 45 IPM. (32) Vertical Feeds, Range 3/32 to 22.5 IPM. Power Rapid Traverse, Vertical ... more37.5 IPM. Serial No. 4J6V5F-2, Model "LA". Feed Motor, Horsepower 5 HP.
Buy It Now
Condition: Used Location: Toledo, United States VERTICAL TRAVEL. . 7-1/2 HORSEPOWER. OVERARM SUPPORT. . DISTANCE SPINDLE TO TABLE. TAPER IN SPINDLE. #50 NS. LONGITUDINAL TRAVEL. SERIAL. . 4A3V1Z-72.
Buy It Now
Condition: For parts or not working Location: Watertown, United States Inventory Number: 01241700002. Manufacturer: CINCINNATI MILACRON. Capacity: 20 KVA. Model Number: ERE. Prices are subject to change. (c) Truckload and ... morePartial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: Used Location: Pomona, United States Table Climb Milling Feature. Vertical Table Travel: 20". 4-Position Turret Type Head Down Feed Stop System with Dial Indicator. 3/16 to 45 IPM (Vertical). ... more75 IPM (Vertical). Power Up - Down Feed of Head.
Buy It Now
Condition: Used Location: Lakewood, United States
Buy It Now
Condition: Used Location: Mentor, United States Used Cincinnati Sabre 500, unit was working and then one day it lost its program maybe cause the battery went bad in the board but we just had board programmed ... moreat Fives for 1500 and not going to do it again. Machine is being sold as is and also has a rebuilt control panel and screen on it. Machine is not under power but will work with a program. I can load this on your truck or trailer free of charge, please email me with any questions and I will try and answer them for you. I also have another Sabre 500 that we are selling too if interested.
Buy It Now
Condition: Used Location: Olympia, United States Cincinnati Milacron. Model: 20V Series (Vertical Machining Center). Linear Axis Feed Rates 5-Axis Vertical Profiling, Contouring Machine, Fixed Bed, Rear ... moreBase. Electrical: 240 Volt / 3 Phase / 60 Cycle.
Buy It Now
Condition: Used Location: Berlin, United States Proud to carry on the tradition set by Industrial Surplus of Connecticut in its 50 years of service.
Buy It Now
Condition: Used Location: O Neals, United States Cincinnati Milling Machine Co. Vertical Milling Head, Converts / Updates Horizontal Mills... Vertical head will convert many old horizontal type mills ... moreinto a more versatile vertical configuration... NMTB 40. However, you will need the bull belt/gear/pulley that bolts up to your arbor; I can make them by special order... Please see additional pictures reflecting model #'s & tape measurements... Item is located near Friant, CA. Once paid for it is available for P/U. Thank you for your interest... Freight Logistics; Do your Homework to get your best rate... Dimensions are: 24"x12"x12" inches or takes up 1/4th standard sized pallet; weight is 125lbs or so... Once paid for, I will load it out on your arranged, UPS or truck / trailer free of charge... SOLD AS IS, WHERE IS.
Buy It Now
Condition: Used Location: Lakewood, United States
Buy It Now
Condition: Used Location: Orange City, United States Greenway Product Number: 10576. Vertical knee travel... 20”. 3/16”-45 IPM (vertical). 15 HP main, 5.5 HP feed, 1/10 HP coolant. Lubrication system.
Buy It Now
Free Shipping Condition: Used Location: Dublin, United States Its sturdy construction, combined with its advanced features, make it a top choice for professionals worldwide. CINCINATI MILCRON SABRE 1000 1997 MODEL. ... moreHAS ALL BELLS AND WHISTLES FOR A 97 MODEL. - 3 MONITORS working?.
Buy It Now
Condition: Used Location: Woolwine, United States Tool changer number of tools 21. Vertical travel, z-axis 20.8". We can power this machine for you to test onsite. Spindle drive motor (max/cont) 17 / ... more12 HP. Machine net weight 7,275 lbs. This machine was operational when removed from service.
Buy It Now
Condition: Used Location: Rocky Hill, United States Cincinnati Vertical Milling Head Attachment Cincinnati Vertical Milling Attachment Ref.78A-58 Serial No. AHA5M7/23 Fits: 2ML. 2MI, Cinova 80, Cinel-60, ... moreCinpak-45 Single Swivel#50 Taper Spindle Includes Drive Gear Excellent Condition Approximate Net Weight: 230 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
Buy It Now
Condition: Used Location: Woolwine, United States Tool changer number of tools 21. Vertical travel, z-axis 20.8". Spindle drive motor (max/cont) 17 / 12 HP. Machine net weight 7,275 lbs. Model: ERO B. ... moreTool length 15". Tool holder weight 15 lbs. Tool selection Bi-directional.
Buy It Now
Condition: Used Location: Harrison, United States MODEL: HYPRO. TURRET HEAD VERTICAL SLIDE TRAVEL. 52" CINCINNATI VERTICAL BORING MILL. RAM HEAD VERTICAL TRAVEL. VERTICAL TRAVEL OF SIDE HEAD. SWIVEL OF ... moreRAM HEAD. .
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States (This item was removed from a Cincinnati Milacron Sabre 750, Model ERH Vertical Machining Center. Manufacturer: Cincinnati Milacron. Model Number: ERH. ... moreMfg. Date: Unknown. Model #: NA. NOTE . 5) Like New Condition.
Buy It Now
Condition: Used Location: Rocky Hill, United States This unit has the very rare adjustable quill. milling machines.
Buy It Now
Condition: Used Location: Berlin, United States Cincinnati Vertical Milling Head Attachment Cincinnati Vertical Milling Attachment Ref.78A-58 Serial No. AHA5M7/23 Fits: 2ML. 2MI, Cinova 80, Cinel-60, ... moreCinpak-45 Single Swivel#50 Taper Spindle Includes Drive Gear Excellent Condition Approximate Net Weight: 230 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
Buy It Now
$4.99 Shipping Condition: Used Location: Toledo, United States This vintage Cincinnati 16" series manual control vertical milling machine is a reliable addition to any metalworking setup. With a hydro-tel design, ... moreit offers precise and efficient milling capabilities that can handle a variety of machining projects. The instruction manual included with this machine provides a comprehensive guide to its operation and maintenance. Featuring a brand name of Cincinnati and model name of Vertical Hydro-Tel Milling, this machine is ideal for those looking for a manual control milling machine that delivers high-quality results every time. Its sturdy build and CNC metalworking capabilities make it a valuable asset for any metalworking business.
Buy It Now
Condition: Used Location: Toledo, United States VERTICAL FEEDS. (16) 1/8 TO 15 IPM (1.5 TO 190 MMPM). VERTICAL TRAVEL OF KNEE. 19". VERTICAL HEAD. . YES TOOLMAKERS OVERARM. VERTICAL HEAD MOTOR. 3 HORSEPOWER.
Buy It Now
Condition: Used Location: Millstadt, United States Used Cincinnati#2 horizontal milling machine vertical head attachment with draw bar. And nmtb 50 drive adaptor gear. Head is in decent used condition ... morespins smooth, drive gears look good. Came from a machine with the dove tail overarm. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a freight shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with
Buy It Now
Condition: Used Location: Roanoke, United States Used CINCINNATI 650-20DK Vercipower 50 Hp 440-Volt Horizontal Bed Type Milling Machine. Horizontal Travel - 50". Vertical Travel - 24". Vertical - 3/16 ... more- 45 IPM. Vertical Rapid Traverse - 15 IPM. Feed Rates - 32.
Buy It Now
$3.95 Shipping Condition: Used Location: Shickshinny, United States
Buy It Now
$3.95 Shipping Condition: Used Location: Shickshinny, United States
Buy It Now
Free Shipping Condition: New Location: Monroe, United States The flow tube and float are easily changed for different gases. The outlet connection is 5/8" - 18" (F). For vertical mounting only. Gas / Gas Service ... moreCarbon Dioxide (Argon - Ar). Scale Range SCFH 10 - 70 (10 - 70) - On maximum continuous duty cycle, CO2 flows to 20 SCFH.
Buy It Now
Condition: Used Location: Houston, United States Chuck is super tight and appears to work great.
Buy It Now
Condition: Used Location: Toledo, United States MODEL. 205 12 PLAIN CINEL 60. HORIZONTAL TAPER. TOOLMAKERS OVER ARM. VERTICAL HEAD DUAL SWIVEL. VERTICAL TAPER. #50NS. SPINDLE SPEEDS. 33 TO 2,000 LBS.
Buy It Now
$9.99 Shipping Condition: Used Location: Tontitown, United States Publication number is M-1432-2. It was printed in 1945 by the Cincinnati Milling Machine Co. This is a used, softcover, book in good condition. There ... moreare 71 pages with black-and-white illustrations throughout.
Buy It Now
Condition: Used Location: Cincinnati, United States The radial cross arm rotates 360 degrees in two planes. An automatic spring feed with 9" of vertical travel is standard. It removes broken tools without ... moredistorting the hole.". Work Height From Work Surface To Bottom Of Disintegrator Head: 17".
Buy It Now
Condition: Used Location: Cincinnati, United States Remanufactured by D.C. Morrison Co. 2018. U.S. BURKE/MORRISON PRODUCTION MILL. 2 HP Spindle Motor. Table Size: 8" x 32". Maximum Distance Spindle Center ... moreTo Table Top: 17". Longitudinal Table Travel: 21".
Buy It Now
$36.95 Shipping Condition: Used Location: Springfield, United States
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. May inspect under power. We load for free. S hipping rates available!
Buy It Now
$16.55 Shipping Condition: Used Location: Federal Way, United States Manual / binder in overall good condition.
Buy It Now
Free Shipping Condition: New Location: Monroe, United States Click to Enlarge Click to Enlarge Just one of inkFrog's Creations Description Harris Argon CO2 355-2 Flowmeter Regulator Shielding Gas Kit 4400235 ... moreBrand new in the box Harris Argon CO2 355-2 Flowmeter Regulator Shielding Gas Kit 4400235. The Model 355-2 flowmeter regulator kits are designed to control argon and/or argon CO2 mix shielding gases. The 355-2AR-58010 shielding gas kit is supplied with a 3/16" x 10' approved inert gas hose. Product Details Regulator is pre-set at 20 PSIG Construction incorporates regulator and flowmeter into one compact unit Flow tube and float are easily changed for different gases Dual calibration on Argon flow tube Sensitive needle valve for fingertip control One-piece encapsulated seat design. With an internal filter and PTFE Teflon® seat Durable. Easy-to-read flow tube and cover Conforms to CGA E-4 Standard for Gas Pressure Regulators Outfit features Model 355 Flowmeter Regulator Outfit includes 10 feet of 3/16" approved hose with inert gas fittings Part Number Model Number Capacity Stage Gauges Gas Inlet Outlet Certifications 4400235, 355-2AR-58010, Medium/Heavy Duty, Single, 2" Brass, Argon CGA 580, 5/8" 18F, CGA E-4, Payment and Shipping This item will ship to the lower 48 states for Free. We accept all forms of payment including credit cards and PayPal. Feel free to call our office direct at 1-800-783-8833 to use your credit card and speak with a live person Monday through Friday 8AM to 5PM EST. to see my other auctions on related welding supplies.
Buy It Now
Condition: Used Location: Cincinnati, United States MODEL: 3UMA. NIIGATA BED TYPE UNIVERSAL MILLING MACHINE. "This machine is a bed type universal milling machine which has a double swiveling spindle head. ... moreBecause of its double swiveling spindle head it can be used as a horizontal or vertical milling machine.".
Buy It Now
$4.99 Shipping Condition: Used Location: Toledo, United States It contains information on how to operate the machine, its features and specifications.
Buy It Now
Condition: Used Location: Louisville, United States RNA-160L Tsudakoma NC Rotary Table w/Trunnion. Hardinge/Bridgeport GX300 4 Axis CNC Vertical Machining Center w/Tsudakoma RNA-160L NC Rotary Table w/Trunnion. ... more6 in Louisville, KY and 3 in Cincinnati, Ohio.
Buy It Now
Condition: Used Location: Cincinnati, United States KURAKI HORIZONTAL BORING MILL. Table Size: 35-1/2" x 67" (7 T-Slots). Spindle Head Vertical Traverse: 48". 18 Spindle Speeds: 10 to 1000 RPM. 11 KW Main ... moreMotor. Cincinnati, Ohio 45223.
Buy It Now
Condition: Used Location: Cincinnati, United States HARDINGE BRIDGEPORT GX 1600 CNC VERTICAL MACHINING CENTER. Model GX 1600, S/N GXEB2D0008, New 2012. Electrics 380-440/3/60. Z-Axis (Vertical Travel) 25". ... moreSpindle Horsepower 25 HP. Spindle Taper CAT 50.
Buy It Now
Condition: Used Location: Louisville, United States Tsudakoma RNA-160L 4th Axis. 6 in Louisville, KY and 3 in Cincinnati, Ohio. Depth: 100.87” (2,562mm). Length: 57.09” (1,450mm). Coolant Tank with Conveyor ... morewith on top walkway. Losma Mist Collection.
Buy It Now
Condition: Used Location: Cincinnati, United States CHEVALIER VERTICAL MILLING MACHINE. Vertical Knee Travel: 16". Align Model AL-250 Power Feed On X-Axis. 3 HP Spindle Motor. Cross Travel: 12". Longitudinal ... moreTravel: 30-3/4". Ram Travel: 12". Quill Travel: 5".
Buy It Now
Condition: Used Location: Lincolnshire, United States Horizontal Rotary Surface Grinder Heald 361. Distance top of chuck to centerline of wheel. Chuck feed rates - Variable.0 - 12 FPM. Independent Lubrication ... moreSystem for Chuck. Swing inside coolant pan - Maximum.
Buy It Now
Condition: Used Location: Louisville, United States Tsudakoma RNA-160L 4th Axis. Hardinge Bridgeport GX300 Vertical Machining Center w/Tsudakoma RNA-160L 4th axis. 6 in Louisville, KY and 3 in Cincinnati, ... moreOhio. Depth: 100.87” (2,562mm). Length: 57.09” (1,450mm).
Buy It Now
Condition: Used Location: Washington, United States Its a great machine. Great as is price. Broken Nut on housing for cross feed. Cincinnati 205 Serial #8J512P5P-88 Comes with Manual and Specs Table Working ... moresurface 52-3/4 x 12 Range Longitudinal 28" cross 10" Vertical 16" Center Line of spindle 16" max
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States M/N- SABRE 750 ER0. This item was removed from a Cincinnati Milacron Vertical Machining Center. Manufacturer: Cincinnati Milacron. This part was pulled ... morefrom a working machine. This item was removed from aWorking Machine, and is being.
Buy It Now
Condition: Used Location: Lansing, United States Cincinnati Milacron Arrow 500 CNC Vertical Machining Center New 1997 EQUIPPED WITH: Acramatic 2100 CNC Control w/ Color CRT(P.C. Based) Hand Held Pendent. ... moreMax Program Storage, Tool Cycle Timer and Counter, Fanuc 0 Translation, MC Extended Cycles. 3-1/2" Floppy, Rigid Tapping, 21 Station Automatic Tool Changer, Full Coolant Enclosure, Keyboard, Spindle Load Meter, Chip and Coolant System. CATALOGUE SPECIFICATIONS: X Travel(Longitudinal) 20" Y Travel(Cross) 20" Z Travel(Vertical) 20" Table Working Surface. 27.5"x20.5" Table Work Load Capacity. 770 LBS Spindle Horsepower. 10 HP Spindle Speeds. 30-6000 RPM Spindle Taper. 40 CAT Feed Rates. X& Y. 0.1 to 472 IPM Feed Rate. Z. 0.1 to 393 IPM Rapid Traverse X& Y. 787 IPM Rapid Traverse Z. 787 IPM Tool Storage Capacity. 21 Approximate Dimensions. 79" x 87" Approximate Height. 106" Approximate Weight. 8.820 LBS
Buy It Now
Free Shipping Condition: Seller refurbished Location: Menifee, United States Cincinnati Bickford Tool Co. Super Service Upright Floor Drills 21", 24" and 28" Round and Box Column Type Repair Parts List. Pictures of the Machine ... moreSays A Thousand Words. I will search for your specific Needs Continually.
Buy It Now
Condition: Used Location: Louisville, United States Tsudakoma RNA-160L 4th Axis w/Trunnion. Hardinge Bridgeport GX300 Vertical Machining Centers w/Tsudakoma 4th axis w/Trunnion. 6 in Louisville, KY and ... more3 in Cincinnati, Ohio. Depth: 100.87” (2,562mm). Length: 57.09” (1,450mm).
Buy It Now
$10.00 Shipping Condition: Used Location: Rochester, United States Cincinnati Benchtop Vertical Mill X Feed Gears Model 00 14dp.875x6spline $for1pc. Please specify which gear when purchasing 26t,32t,40t,47t,55t&61t
Buy It Now
Condition: Used Location: Cincinnati, United States HAAS EC-400 CNC HORIZONTAL MACHINING CENTER. Number of Pallets 2. Model EC-400, S/N 2054698, New 2015. Y-Axis (Vertical Travel) 20". Max Cutting Feed ... moreRate 500 IPM. Max Spindle Torque 75 FT-LB @ 1400 RPM.
Buy It Now
Condition: Used Location: Cincinnati, United States Serial No 31401C74-0012, Model 0-12, Ltr DL. PLAIN AUTOMATIC HORIZONTAL PRODUCTION MILL. Spindle-Head Vertical Travel, Hand 4.5". Spindle-Head Vertical ... moreTravel, Power 2.5". Vertical Spindle-Carrier Feeds 1 to 10 IPM.
Buy It Now
Condition: Used Location: Guilford, United States Model: Cincinnati Milacron CIN 1270935A. Model: CIN 1270935A. CIN 1270935A. Lubrication System For Arrow Vertical Machine VMC 1000. Make: Cincinnati Milacron. ... moreCincinnati Milacron. Height: 6 Length: 48 Width: 17.
Buy It Now
$4.16 Shipping Condition: Used Location: Rancho Cucamonga, United States
Buy It Now
Free Shipping Condition: New Location: Monroe, United States The flow tube and float are easily changed for different gases. The outlet connection is 5/8" - 18" (F). For vertical mounting only. Gas / Gas Service ... moreArgon (Carbon Dioxide - CO2). Harris Model 25GX-500-580 HVAC Nitrogen Purging Regulator 3000606.
|
|
|
|
VINTAGE 1960 CINCINNATI 16" HYDRO-TEL VERTICAL MILLING MACHINE BROCHURE HYDROTEL
5 DAY AUCTION! 19 60 CINCINNATI HYDRO-TEL VERTICAL MILL BROCHURE 16" HYDRO-TEL SPECS. FEATURES, CONSTRUCTION, ACCESSORIES 20 PGS YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.50 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL ME INTERNATIONAL BIDDING REQUIRES APPROVAL PLEASE DO NOT ASK TO BUY A PHOTOCOPY DURING OR AFTER AUCTION. COPIES ARE NOT AVAILABLE I DO SEND 2ND CHANCE OFFERS ON OCCASION IF I HAVE DUPLICATES. EMAIL ME TO VERIFY I SENT IT IF YOU'RE NOT SURE IT CAME FROM ME. IF YOU DON'T WANT TO RECEIVE 2ND CHANCE OFFERS YOU MIGHT WANT TO USE THE EBAY FEATURE THAT WILL ALLOW YOU TO'OPT-OUT' OF RECEIVING 2ND CHANCES FROM SELLERS. BUYER CAN COMBINE SHIPPING ON MULTIPLE ... morePURCHASES. IF YOU BUY 1 COST IS $6.50. IF YOU BUY MULTIPLE ITEMS COST WILL STILL BE ONLY $6.50 TOTAL. SHIPPING COSTS ONLY INCREASE ON MULTIPLE PURCHASES IF YOUR ORDER CAN'T FIT IN A PRIORITY MAILER AND HAS TO BE PACKED OTHERWISE. SHIPPING& HANDLING CHARGES ARE NOT NEGOTIABLE. EVERYBODY PAYS THE SAME.
|
|
|
Cincinnati 10" x 42" Vertical Milling Machine w/ Power Feed
Cincinnati 10" x 42" Vertical Milling Machine w/ Power Feed DESCRIPTION Cincinnati ToolMaster Vertical Milling Machine Product Condition: USED- Nice! This mill is a great working condition. Specifications: Table Table Size: 10" x 42" T-Slots: 3@2.5" centers T-Slot Size: 625" Table Load: 800lbs Travels Longitudinal Travel(x-axis) 30" Saddle Travel(y-axis) 10" Knee Travel(z-axis) 17" Quill Travel: 3.5" General Motor: 2 hp Electrical: 220/440 volts 3 phase Power table& saddle feeds Variable speed spindle: 60- 3300 rpm Approx Weight: 3.000lbs- Local Pickups Local pickup is available for all items Monday thru Friday 8:30am- 4:30pm Domestic Shipments Domestic shipments are sent via UPS or USPS Priority Service. We choose the fastest most economic shipping method based on a items size. Weight, ... moreand value ratio. Items sent to Alaska& Hawaii are subject to additional charges. International Shipments We ship to all international countries. International shipments are sent USPS International Priority unless otherwise requested. Contact us for international shipping quotes. Freight Shipments Items requiring freight will be securely strapped to a pallet and loaded at no additional charge. Carriers assess an extra charge if delivery is made to residential area and/or if the service of a lift gate are required. Rigging charges may apply to items requiring special loading/shipping requirements. Your satisfaction is our highest priority! To the best of our knowledge the item is in perfect working condition. We do our very best to describe items as accurately as possible and in no way would misrepresent or knowingly sell an item that was not working. But since this item is used and at times. We do not know the history of an item, all items are sold"AS-IS" No refunds, returns, or exchanges will be given. Please contact us with any and all questions as your satisfaction is our highest priority.
|
|
|
Cincinnati milling machine vertical head drive arbor spline drive
Cincinnati milling machine splined drive arbor. 50nmtb shank. Dirty but minimal rust. Patent 179436 or 1794361. Spline appears to be 1.5" OD as best I can measure with tape measure. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13e6d1102ee-0x107-
|
|
|
CINCINNATI CINOVA 80 VERTICAL DIAL TYPE MILL MILLING MACHINE 307-14 w/DRO
SquareTrade © AP6.0-VERY NICE CINCINNATI CINOVA 80 VERTICAL DIAL TYPE MILL MILLING MACHINE 307-14 Prev Stop Play Next You are bidding on a Cincinnati Vertical Dial Type Mill. Model: Cinova 80, 307-14 Series with Digital Readout. This is a very nice Mill in great condition and it is fully guaranteed. Table working surface 14” X 63” Longitudinal Travel: 34” Cross Travel: 12” Vertical. Knee 14” Vertical. Head 4" Distance spindle nose to table 1”19” Throat 7-9/16” 19-9/16” 16 Spindle speeds. 25-2000 RPM Longitudinal& Cross Feeds ¼- 30 IPM Vertical knee feeds 1/8– 15 IPM Rapid traverse rate- longitudinal& cross 150 IPM Rapid traverse rate- vertical knee 75 IPM We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13e8c763f23-0xf1-
|
|
|
5" Spdl 120" X Cincinnati-Gilbert J HORIZONTAL BORING MILL, 84" Vertical,#50 PDB
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 5" Spdl 120" X Cincinnati-Gilbert J HORIZONTAL BORING MILL. 84" Vertical,50 PDB Ref# 141709 iammdna XHBMTT 5" CINCINNATI- GILBERT HORIZONTAL TABLE TYPE BORING MILL MODEL: J. S/N: J285, ... moreYEAR: 1976 SPECIFICATIONS: SPINDLE DIAMETER. 5" SPINDLE TAPER. 50 STD SPINDLE TRAVEL. 36" VERTICAL HEADSTOCK TRAVEL. 84" CROSS TABLE TRAVEL. 120" SADDLE TRAVEL. 65" TABLE SIZE. 60" x 135" MAXIMUM TABLE LOAD. 60.000 LBS SPINDLE SPEED RANGE(27) 10- 1.000 RPM FEED RANGES: SPINDLE& SADDLE. 05- 60 IPM HEAD& TABLE. 5- 120 IPM LENGTH OF BED. 132" HEIGHT TO TOP OF COLUMN. 156"H EQUIPPED WITH: THREE AXIS ACURITE DIGITAL READOUT FULL PENDANT CONTROL#50 TAPER POWER DRAW BAR HARDENED BED& SADDLE WAYS THREE WAY COLUMN OUTRIGGER SADDLE SUPPORTS BALL SCREWS ALL AXES RAPID TRAVERSE ALL AXES AUTO LUBRICATION SYSTEM COOLANT SYSTEM 30 HORSE POWER MAIN MOTOR Machine Location: HARRISON. NJ Click Here For More Cincinnati-Gilbert Machines Click Here For More Boring Mills- TABLE TYPE HORIZONTAL BORING MILLS(s) Questions about this Machine? Call David at(800) 873-6224 ext 7570 Need a Freight rate? Call A
|
|
|
Cincinnati Arrow 1000 CNC Vertical Mill with Acramatic 2100 Control
Cincinnati Arrow 1000 CNC Vertical Machining Center S.N. 7049-A00-KT0970 New in 1997 Specifications Table size: 44" x 22" X-axis Travel: 40" Y-axis Travel: 20" Z-axis Travel: 22" Spindle Speeds: 60-5000 RPM Spindle Taper: CAT40 Tool Changer: 21 ATC Equipped With Acramatic 2100 CNC Control 15 hp Spindle Motor(21) Position Automatic Tool Change Full Enclosure Coolant approx. overall dimensions: 120" l-r x 95" f-b x 96" h approx. weight 10.000 lbs. Machine available for inspection under power by appointment ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3602 BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST
|
|
|
Cincinnati Vertical Milling Head Attachment
Cincinnati Vertical Milling Head Attachment Cincinnati Vertical Milling Attachment Ref.78A-58 Serial No. AHA5M7/23 Fits: 2ML. 2MI, Cinova 80, Cinel-60, Cinpak-45 Single Swivel#50 Taper Spindle Includes Drive Gear Excellent Condition Approximate Net Weight: 230 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide ... morespecial preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
Cincinnati Universal Vertical Milling Head Attachment
Cincinnati Universal Vertical Milling Head Attachment Cincinnati Vertical Milling Attachment Ref. 78A-15 Fits: Single Swivel 12.5" Face to Vert. Spdl Center#50 Taper Spindle This is an original Cincinnati item. We SPECIALIZE in parts and tooling for CINCINNATI milling machines! All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to ... moreclear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
Cincinnati Vertical Milling Head with Adjustable Quill
Cincinnati Vertical Milling Head with Adjustable Quill Cincinnati Vertical Milling Head Adjustable Quill Ref. 78A-30 This unit replaces the standard spindle carrier of a universal(double swivel) milling attachment to provide movement of the quill and spindle. 50 Taper Spindle This is an original Cincinnati item. We SPECIALIZE in parts and tooling for CINCINNATI milling machines! All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer ... morepays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
CINCINNATI HEAVY DUTY VERTICAL MILLING ATTACHMENT 50 NMTB TAPER
CINCINNATI HEAVY DUTY VERTICAL MILLING ATTACHMENT INVENTORY# 2994 FOR VERTICAL MILLING OPERATIONS WITH LARGE ENDMILLS AND FACE MILLS. SPECIFICATIONS: SPINDLE TAPER: 50 NMTB TILTS: R-L 45° EQUIPMENT INCLUDED: DRIVING ADAPTER WITH# 50 NMTB TAPER 1 WELDON END MILL HOLDER GOOD CONDITION CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, ... moredifferent models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be made. The information on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Please contact one of our sales representatives if you require more information or a current formal quotation. NORMAN MACHINE TOOL. LTD. CONDITIONS OF SALE: INSPECTION AND TEST EQUIPMENT Inspection& Test Equipment will be sold
|
|
|
Cincinnati 3-Axis CNC Horizontal/Vertical Mill No. 750-20 VerciPower
Cincinnati 3-Axis CNC Horizontal/Vertical Mill No. 750-20 VerciPower Cincinnati 3- A xis CNC Horizontal/Vertical Mill Ref.76 A-166 Model No. 750-20 VerciPower Retrofit Serial No. 9J73H5R-2 This Vercipower mill. Equipped with dependant overarm& universal vertical head, was fully retrofitted in 1998 into a 3- A xis CNC machine by a major aircraft manufacturer. Equipped with extra length table and outboard supports for the saddle. Table Size: 20" x 117" Longitudinal Table Travel: 72" Cross Table Feed: 18" Vertical Head Travel: 24" Maximum Distance Horizontal Spindle Center to Table Top: 26" Maximum Distance Vertical Spindle Nose to Table Top: 31" Spindle Speeds. Variable: 14- 1400 RPM Horizontal& Vertical Spindle Nose Tapers: 50 Overall Machine Size: 10' x 10'4" x 9' High Equipped With: ... moreDependant Overarm& Universal Milling Head Indramat A C Variable Speed Spindle Drive Allen Bradley 9 Series 3- A xis CNC Control Outrigger Saddle Supports A utomatic Lube System A llen Bradley Software Ball Screws Hard Knee Manuals Coolant 50 HP Spindle Drive 460/3/60 Approximate Net Weight: 23.000 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. N
|
|
|
#207MK CINCINNATI MILACRON Horizontal Mill W/ Universal Vertical Head (New 1980)
Preowned CINCINNATI MILACRON Knee-Type Horizontal Milling Machine with Universal Vertical Milling Head. Model: 207MK, S/N: 13J23P1AHE-69(New 1980) Table working surface Range: longitudinal cross vertical(knee) Minimum/Maximum distance. Spindle center to table Horizontal spindle taper Vertical spindle taper(16) Spindle speeds(16) Longitudinal and cross feeds vertical feeds Rapid traverse rate. Longitudinal& cross vertical 13.75" x 59.5" 33.5" 13.72" 18.75" 0"18.75" No. 50 N.S.T. No. 40 N.S.T. 25 to 1.500 R.P.M. 1/2 to 60 I.P.M. 1/4 to 30 I.P.M. 150 I.P.M. 75 I.P.M. Equipped With Universal vertical milling head with#40 N.S.T. mounted on swing-arm type accessory hinge Dual inch/metric reading dials for longitudinal. Cross, and vertical feed handwheels Handwheel with micrometer dial for manual quill adjustment(1) ... moreArbor support Hardened box ways Automatic backlash eliminator Power rapid traverse. All directions Dual inch/metric reading dials for longitudinal. Cross, and vertical feed handwheels Coolant system with 1/3 H.P. pump motor 5.5 H.P. 3/60/230-460 volt feed motor 7.5 H.P. 3/60/230-460 volt spindle drive motor and electrical controls Machine is wired for 460 volt operation. Approximate Weight: 6.150 Lbs. Approximate Dimensions: 68" L-R x 77" F-B x 67" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
Cincinnati Sabre 500 CNC Vertical Machining Center
Item Information Item Name: Cincinnati Sabre 500 CNC Vertical Machining Center Item# 10526 Price/Each: $12.000.00 Year: 1996 Brand Name: Cincinnati Model: Sabre 500 Serial# Asset Tag: Item Location City: Elk Grove Village State: Illinois Zip Code: 60007 Country: United States Item Description CINCINNATI CNC VERTICAL MACHINING CENTER MODEL: SABRE 500 YEAR: 1996 Specifications: Equipped With: Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments ... moreare to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damag
|
|
|
Cincinnati 460v 3 Phase Vertical Milling Machine 80 307-14
Cincinnati 460v 3 Phase Vertical Milling Machine with Anilam 3 Axis Digital Readout Cinova 80 307-14. Model: Cinova 80 307-14. S/N# 31423U5U-0002. Anilam Wizard 3 Axis. 110v Digital Display, Model 113-2. Louis Allis 3HP. 3 Phase, 1740 RPM Electric Motor. Electric Motor Model: 7364741018. Graymills 1/8 HP 230/460v Coolant Pump. Type M.T. Approximate Weight: 5000 lbs( AB 0621.6) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. ... moreSHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW
|
|
|
Cincinnati Vertical Milling Machine Model 550-20 Verci-Power
Cincinnati Vertical Milling Machine Model 550-20 Verci-Power Cincinnati Vertical Bed Type Milling Machine Ref.78-470 Model No. 550-20 Verci-Power DH Serial No. 311053V78-001 New 1978 Extra High Column and Extra Wide Table Table Size: 25" x 94" Longitudinal Table Travels: 50" Cross Table Travel: 18" Head Vertical Travel: 35" Maximum Distance Spindle Nose to Table top: 37" Spindle Speeds: 14- 1400 RPM Table Feed Rates: 3/8- 90 IPM Rapid Traverse Rate: 150 IPM Spindle Nose Taper: 50 with#60 Flange Overall Machine Dimensions: 9'6"L-R x 8'4"F-B x 10'10" H Equipped With: Power Shifting of Speeds& Feeds Hardened and Ground Ways A utomatic Table Cycle Motorized Central Lube Backlash Eliminator Power Drawbar Coolant 50 HP Spindle Motor 230/460/3/60 7.5 HP Feed Motor Approximate Net Weight: ... more30.000 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all ship
|
|
|
vertical mill head for Horizontal mill maybe Cincinnati K&T B&S or other
Up for sale as the basement cleanout continues: A Cincinnati vertical milling head for a horizontal mill. Don’t know what mill this will fit. It has a MT4 spindle. With a collet holder and 6 collets included in the sale. The drive shaft is a B&S#10. With some slight rust– should clean up well. Drive gear looks to be in good shape. Mates well with the driven gear. Ratio appears to be 1:1(no speed reduction or increase) It is. As you can see, missing a bearing cover, and a couple bolts look not to be original. Measures 16 ½ inch from the face of the mounting plate to the end of the support rod. I am not sure if the current base‘home plate’ shape or original or added to the‘round’ base. Length of spindle is 8 3/8 inch. The bolt spacing(not circle. But bolt to bolt distance) for the three bolts on the round mount plate is 5 5/8 inches. ... moreThe bolt spacing on the‘home plate’ plate is 7.5” between bolts on the square end. And 8 inches between bolts along the angle sides. The gear drive meshes up well. And spindle turns well, but I have no way to drive the head, and do not any solid information on the condition of bearings or gears. The previous owner was said to have been using it. But again, no idea of noise/runout/etc. I actually bought this to modify as a telescope mount. But have too many projects, not enough time. If you can tell me any model numbers or compatibility information. Please let me know. Please ask any questions prior to bidding.
|
|
|
#FTV840-1800 CINCINNATI MILACRON CNC Vertical Machining Center (New 2002)
Preowned CINCINNATI MILACRON CNC Vertical Machining Center. Model FTV840-1800, S/N 7078-A00-KH0025(New 2002) Capacity: Range(X-axis) Y-axis) Z-axis) Minimum/Maximum distance. Spindle nose to table Worktable: Table size(length x width) Maximum table load Number of table t-slots Axis Performance: Rapid traverse rates. All axes Maximum feed rates. All axes Spindle Performance: Taper Power Speed range Toolchanger: Number of stations Maximum tool weight Maximum tool diameter with adjacent pocket empty Maximum tool diameter with adjacent pocket full Maximum tool length Metal-to-metal times 72" 32" 31.5" 4.72"37.4 32" x 92" 5.940 Lbs. 5 1.576 I.P.M. 788 I.P.M. CAT 40 25 H.P. 0 to 8.000 R.P.M. 48 17 Lbs. 5.51" 3.15" 13" 4 seconds Equipped With. SIEMENS Acramatic 2100Di three-axis CNC control with RS 232 ... moreport. 3-1/2" floppy disc drive. USB port, and hand held pendant control with manual pusle generator Linear way design with caged roller way bearings Glass scale feedback on all axes Fixed table. Traveling column design Complete machine enclosure(48) Position automatic toolchanger mounted in the column. Protected by cam operated doors Large capacity external coolant tank with pump motor 25 H.P. spindle motor Machine is wired for 3/60/460 volt operation. Approximate Total Weight: 35.500 Lbs. Approximate Floor Space Required With Swarf Conveyor In Place: 189" L-R x 149-3/4" F-B x 153-2/3" Maximum Height, F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
Cincinnati 12" x 59" Vertical Milling Machine Model 210-12 Dial Type LL
Cincinnati 12" x 59" Vertical Milling Machine Model 210-12 Dial Type LL Cincinnati Vertical Milling Machine Ref.78-484 Model No. 210-12 Dial Type LL Serial No. 4A2V5F-6 Table Size: 12" x 59" Table Travel. Longitudinal: 28" Table Travel. Cross: 12" Vertical. Knee: 13" Vertical. Head: 6" Spindle Speeds: 18- 1800 RPM Table Feed Rates: 3/8- 90 IPM Spindle Nose Taper: 50 Std. Equipped With: Coolant 10 HP Spindle Motor 230/460/3/60 5 HP Knee Motor Approximate Net Weight: 9.000 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items ... morefrom us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
Cincinnati Vertical milling Machine No. 5 Dual Power
Cincinnati Vertical milling Machine No. 5 Dual Power Cincinnati Vertical Milling Machine Ref.78-474 Model No. 5 Dual Power Serial No. 4J5V1W-8 Rebuilt 1988 Wide Knee Design Table Size: 20" x 94-1/2" Table Travel. Longitudinal: 50" Table Travel. Cross: 18" Table Travel. Vertical. Knee: 16" Table Travel. Vertical. Head: 6" Max. Distance Spindle Nose to Table Top: 22" Distance Spindle Center to Vert. Columns: 20-1/2" Spindle Speeds: 14- 1400 RPM Table Feeds: 3/8- 90 IPM Spindle Nose Taper: 50 Equipped With: Power Shifting of Speeds& Feeds A utomatic Table Cycle Backlash Eliminator Vert. Turret Depth Stop Bijur One Shot Lube Coolant 25 HP Motor Drive 220/440/3/60 Approximate Net Weight: 17.700 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: ... moreWe are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or
|
|
|
Cincinnati 307-14 Horizontal/Universal Milling Machine; Vertical Head-DRO-Vise
A local company had recently closed one of its research and development machine shops. The equipment that has not been transferred to one of their other divisions will be released for disposition and will be offered for sale. The sale is final so please feel free to ask any questions that you might have. Offered here is a Cincinnati#307-14 Horizontal Milling Machine. I was told that the machine was purchased new in 1969 and it does not appear to have ever been used in a production environment. It is equipped with a universal table. Vertical Head overarm, 3 Axis DRO, and Arbor Support. Also included is the original Cincinnati Vise. I had seen the machine under power and everything looked to be in nice operating order. It is located in southern New Jersey, zip 08081 and can be loaded onto a truck at no cost. Inspection is welcome by appointment.
|
|
|
Vertical Head for Cincinnati Mill with drive gear
Vertical head for Cincinnati milling machine. This was removed from a Cincinnati 2U universal mill. Serial number 4J2U1Y-11. Included is the NMTB-50 mounted drive gear. This vertical head is in good working order. This item weighs just under 300# so local pickup or buyer arranges for freight. I will deliver it strapped to a pallet to any of the freight terminals in Hagerstown, MD.
|
|
|
Vertical/horizontal cincinnati milling machine...220 or 440 volt,
We have a nice working Cincinnati mill.Its wired for 440 volt right now but can be run on 220.10 hp 3 phase motor.runs smooth.13.2 amp. X travel is approx. 35 inches.Y travel approx. 14 inches and Z travel is approx. 18 inches.3 dimensional power feed.Table size is 83x21 inches. Tables is in very good condition.This mill is built very well.
|
|
|
CINCINNATI ARROW 750 CNC VERTICAL MACHINING CENTER
Normal 0 false false false MicrosoftInternetExplorer4 FEEL FREE TO E-MAIL FEEL FREE TO CALL 203.265.5639 CINCINNATI ARROW 750 CNC VERTICAL MACHINING CENTER 1994 MACHINE CATALOG SPECIFICATIONS(to be verified) X travel 30 Y travel 20 Z travel 20 Table size 36x20 Spindle motor 10 HP Spindle Speeds 60-6000 Spindle Taper CAT 40 Tool Change Capacity 21 Voltage 230 Weight 7300 Control CT FNC ALL SHIPPING COSTS ARE TO BE PAID BY THE PURCHASER. I CAN LOAD THIS MACHINE ONTO A FLATBED TRUCK FOR $150. OUR ZIP CODE IS 06492 THE MACHINE MUST BE PAYED IN FULL WITHIN 48 HOURS OF THE SALE. CHECK OR WIRE TRANSFER PREFERRED THE MACHINE IS LOCATED IN OUR WAREHOUSE AND CAN BE VIEWED AT ANY TIME k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-1406ef87a4a-0xf6-
|
|
|
Cincinnati 3-Axis CNC Vertical Machining Center Saber 750 ERH
Serial# 7029 A00 93 0787 Table Size: 20" x 34" Longitudinal Table Travel. X-Axis: 30" Cross Travel. Y-Axis: 20" Head Vertical Travel. Z-Axis: 30" Maximum Dist. Spindle Nose to Table Top: 33" Spindle Speed Range. Variable: 30- 5000 RPM Table Feed Rates. Variable: 0.1" 787"Min. Head Vertical Feed Rates. Variable: 0.1" 708"Min. Table Load Capacity: 1000 Lbs. Number of Positions on Tool Changer: 21 Spindle Nose Taper: CAT-40 Overall Machine Dimensions: 10' x 8'4" Machine Weight. Approx. 9500 Lbs. Equipped With: Acramatic A850 SX MC R1.3 CNC Control with CRT Thru Spindle Coolant and Air Blast Parameter Back-Up Discs Extended Z-Axis Height High Torque Carrier 17 Kw(22 HP) Spindle Motor 230/3/60 and more. You can make shipping arrangements if needed
|
|
|
Cincinnati No 2L Vertical Milling Machine
Machine is powered up and seems to be in excellent condition all feeds speeds are working and running smooth. Table size is 10 x 52 only 1 axis on the DRO is working. Spindle taper size 50. 5 tool holders go with machine. We can forklift load to truck or trailor. Can crate and ship for additional charge. Posted with
|
|
|
Cincinnati Toolmaster No. 1 Vertical Milling Machine #1-D with Mitutoyo X/Y Axis
Cincinnati Toolmaster No. 1 Vertical Milling Machine#1-D Comes complete with the following Manuals: Cincinatti ToolMaster Milling Machines Operation Manual for Mitutoyo 164 Seriews GM-Counter Operator's Instruction Book for Toolmaster Milling Machines Lubrication Manual Parts& Service Manual for Cincinnati Milacron Toolmaster Milling Machines Shaper Speeds in Strokes per Min 46 123 67 177 87 250 22' 8.28" Table Travel(1) Mitutoyo X/Y-Axis DRO Other Forms of Payment Accepted: Money Order Bank Checks Wire Transfer Business/Personal Checks*Payment for item and shipping costs must clear prior to shipping item. This item can be picked up in Plainville. CT 06062 or we can arrange for a freight quote. We will also ship with your preferred shipper. We will load the item free of charge. TRIPS INDUSTRIAL SURPLUS makes no representation ... moreof any item(s) sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit(s) will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the item(s) The Purchaser, by bidding on this item, indicates their acknowledgment of and agreement to the terms of this disclaimer.
|
|
|
Cincinnati Milacron 550-20 Vertical Mill
PLEASE CALL TREVOR@ 817.247.7336 FOR ALL INQUIRIES Cincinnati Milacron 550-20 Vertical Vercipower Vertical Mill Specs: Model: 550-20-S/N:9J53V5T-2-R-85 Tabel Dimensions: 20"W x 94.5"L-Table Travel: 50" AC VOLTS: 460-PH: 3- TOTAL FLI: 70. All equipment is sold“as is” with no warranty either written or implied. It is the Buyer’s responsibility to make a thorough inspection of equipment for verification of specifications& options.
|
|
|
CINCINNATI HEAVY DUTY-VERTICAL MILLING MACHINE HYDROTEL 28-120 X 32" HIGH DK
Cincinnati Heavy Duty Milling Machine- 20.000 plus on table Hydro-tel 28-120. Vertical milling machine, DK model, S/N 1H8V5R-8 Milling machine- H.D. +20.000# on table 120" x 24" wide and 32" high 50 M.T.28Y-96X-32Z This machine is in good. Working condition. Digital R.O. Fully operational. Tracer/stylus in working order, digital readout included, used for milling, drilling model bumping. Shipping is responsibility of buyer.
|
|
|
#315-16 CINCINNATI MILACRON High Power Dial-Type Vertical Mill (New 1978)
Preowned#315-16 CINCINNATI MILACRON Dial-Type Vertical Mill. Model: High Power S/N: 31043V78-0009(New 1978) Table working surface Range: longitudinal cross vertical(knee) vertical(head) Minimum/Maximum distance. Spindle nose to top of table Spindle nose(24) Spindle speeds(32) Longitudinal and cross feeds(32) Vertical feeds(32) Vertical head feeds Rapid traverse rate. Longitudinal and cross vertical(knee) vertical(head) 16-1/4" x 71-3/4" 34" 14" 16" 7" 0"22-3/4" No. 50 N.S.T. 16 to 1.600 R.P.M. 3/8 to 90 I.P.M. 3/32 to 22-1/2 I.P.M. 3/16 to 45 I.P.M. 150 I.P.M. 37-1/2 I.P.M. 75 I.P.M. Equipped With Power down feed of milling head with four position turret-type stop and dial indicator Hardened ways on the knee Power rapid traverse. All directions Automatic backlash eliminator Manual draw bar Coolant pump ... more5 H.P. 3/60/230-460 volt feed motor 15 H.P. 3/60/230-460 volt spindle drive motor and electrical controls Machine is wired for 460 volt operation. Approximate Weight: 11.725 Lbs. Approximate Dimensions: 95" L-R x 99" F-B x 100" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
Cincinnati #2 vertical head attachment for horz. mill angle head @40 taper
This is a attachment head to use your horizontal mill for angle or vertical use. Takes std. 40 toolholders. Turns smoothly. all grease fittinjgs take grease. The picture with the tapeline is showing the width here at about 5-5/8" If there is a more professional way to measure the fit. Let me know. It is the same fit as my Cincinnati Cinel-60#2 mill takes. Drive shaft is!spline goes into your spindle too holder. I never used it, I'm sure there is a special tool holder for this but I suppose you could always drive it with a sdt 1" toolholder W/ setscrew if you had to. Brass plate states"speed is 1.66 times machine spindle speed" Local pickup only Cash at pickup prefered. Located in western NY state. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-144d9208713-0x108-
|
|
|
20” x 20” x 20” Cincinnati Arrow Vertical Machining Center With Four Axis,
20” x 20” x 20” Cincinnati Arrow Vertical Machining Center With 4 Th Axis. Model 500, With Acramatic A 2100 4 Axis CNC Control. S/N 7042- A00K 240, New 1999 Machine Specs: Table Size 27.5” x 20.5” Weight Capacity 770 LBS Travels X 20” Y 20” Z 20” Main HP 10 HP Taper Cat 40 Spindle Speeds 30- 8000 RPM ATC 21 Positions Feed Rate X& Y 0.1- 472 IPM Z 0.1 393 FPM Rapids X& Y 787 Equipped With: Acramatic A 2100 PC Based Four Axis Control 232 Port. Disk Drive, Remote Pendant Control 6” Cincinnati Rotary Table ModelDL- 6.5 B. S/N 5200-11 Grundfos High Pressure Coolant Coolant Filtration Full Enclosure Excellent Inspect Under Power in Our Branchburg NJ warehouse Questions Call Dave@ 908-399-8133
|
|
|
Cincinnati Horizontal & Vertical Milling Machine 14x62 Table Wow Side Controls
Large Cincinnati Horizontal& Vertical Milling Machine. Serial Number 2J3P5A-33. 14" x 62" Table with rare front and side controls for XY&Z movements, rapid traverse, Comes with complete vertical Head attachment. Not Shown in Photos You will also get 2 Arbor supports, Arbors, Boring Head and some other Spindle holders, Vise as seen in Photos, Digital Readout not tested, Runs Nice, Selling as You see it. Local pickup, Free loading on Buyers truck from Pa zip code 18966. Buyer pays all shipping costs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14537496b44-0x110-
|
|
|
Cincinnati Vertical MILLING MACHINE 0-8 (28518)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number:28518. CINCINNATI VERTICAL MILLING MACHINE MODEL: 0-8VERT SERIAL NUMBER: 4FV-1J47-167 GENERAL SPECIFICATIONS Table Size: 24 3/4" x 9" Longitudinal Travel: 8" Cross Travel: 6" Quill Travel: 4" Spindle Taper: 40 Spindle Speeds. Variable: 150 to 1300 RPM Feeds: 8) EQUIPPED WITH 1 HP Spindle Motor. 220/60/3 Approximate Weight: 2000 Lbs. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 ... morePayment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the item Any item purchased with a pick up or delivery date more than 10 days from dat
|
|
|
Cincinnati Model 3MI Horizontal & Vertical Milling Machine with Dual Motors
Cincinnati Model 3MI Horizontal/ Vertical Milling Machine. Serial No. 2J3P5E-10. 50 Taper Spindles. Has Front and Side Controls for XY& Z Movement. Table Size is 14" x 70 1/2" Weight of Machine is around 9300 lbs. Has 1 Arbor Support. Has 7 Arbors/Holders and 2 Carbide Insert Cutters(No Inserts) Runs good. Vertical Motor Contact Sticks sometimes in lower speeds. Main Motor is 7 1/2 HP and Vertical Motor is 3 HP. Coolant pump has been cleaned and works well. I have a.PDF version of the Service Manual for this Machine. Machine is powered up and can be checked out by appointment. Machine must be moved by a Rigger at the buyers expense. Local Pickup Only at 85719 Zip.
|
|
|
1999 CINCINNATI MILACRON MODEL ARROW 1500 VERTICAL MACHINING CENTER W ACRA 2100
NOMINAL SPECS. MUST BE VERIFIED PLEASE CALL JIM FOR MORE INFO 7146121480 CINCINNATI MILACRON ARROW 1500 Vertical Machining Center Acra 2100 CNC w/CRT. X=60" Y=30" Z=30" 21 ATC, 30" x 64" Table, 8000 RPM, 15HP, Thru Spindle Coolant, New 1999
|
|
|
#750 CINCINNATI-MILACRON "SABRE 3-AXIS CNC VERTICAL MACHINING CENTER #SVDP43
750 CINCINNATI-MILACRON"SABRE" SVDP43 3-AXIS CNC VERTICAL MACHINING CENTER New 1990. Serial No 7029A-89-0037. Model 750, Series"SABRE" EQUIPPED WITH: Cincinnati-Milacron Acramatic#850 CNC Control CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 17" x 34" Table Load Capacity. 1000 LBS X-Axis Table Longitudinal Travel. 30" Y-Axis Saddle In/Out Cross Travel. 15" Z-Axis Spindle-Head Vertical Travel. 20" Spindle-Center to Column. Maximum. 16.5" Spindle-Nose to Table-Top. Maximum. 26.5" Spindle Taper. V-Flange. 40 CAT Spindle Speeds. Range. 60 to 8000 RPM X. Y& Z-Axis Feeds, Infinite Range. 100 to 480 IPM Rapid Traverse Rates. X, Y& Z-Axis' 480 IPM Floor Space Required. W x D. 7'10" x 7'1" Overall Height. 8'4" Weight. Approximately. 8000 LBS NOTE: ... moreMachine Has No Axis Drives And Is Being Sold As A Parts Machine. PRICE: F.O.B. OUR WAREHOUSE. $1.000.00.
|
|
|
Cincinnati #2 High Speed Vertical Mill with cutter and vise
Cincinnati#2 High Speed Vertical Mill with cutter and vise as shown Check out the spec sheet in the pictures to see the specs. This is a nice cutting machine. A bit on the noisy side. But that's why I'm selling it cheap. I need the space and don't have time to go through it. It'll come with the vise and cutter shown in the pictures. CHECK OUT MY PRICES VERSES MY COMPETITION. WE DON'T HAVE 15000 FEEDBACKS. LAST CHECK I THINK I'M AROUND 750 OR SO. WE'VE EARNED THEM ONE AT A TIME. CHECK OUT OUR FEEDBACKS, YOU'LL SEE TIME AND TIME AGAIN THAT I DESCRIBE MY EQUIPMENT WELL AND GET IT THERE SAFELY. VIDEO LINKS TO THIS MACHINE RUNNING VIDEO PROMO OF LEE'S MACHINERY WE'RE A FOUR MAN SHOP. LEE(MY DAD) HAS BEEN DOING THIS FOR 50 YEARS AND IS PRETTY MUCH RETIRED, MIKE(ME) WHO'S BEEN DOING THIS FOR 23+ YEARS, ... moreMEL 9 YEARS AND DENVER(MY SON) WHO BEEN HERE FOR A LITTLE OVER 4 YEARS NOW. NICE EQUIPMENT AT A FAIR PRICE AND WE GET IT THERE IN ONE PIECE. WE HAVE OVER 20 BRIDGEPORT OR BRIDGEPORT TYPE MILLING MACHINES IN STOCK! WE ALSO HAVE LATHES, GRINDERS, BANDSAWS, HONES, DRILL PRESSES, TOOLING,ETC. I DON'T LIKE USING THE AUTOMATIC FREIGHT CALCULATOR. I LIKE TO PUT THE TRUCKING COMPANIES UP AGAINST EACH OTHER SO I GET SOME GOOD COMPETITIVE PRICES. JUST E-MAIL ME WITH YOUR ZIPCODE AND LET ME KNOW IF YOU CAN UNLOAD ON YOUR END VIA- LIFT TRUCK, OR LOADING DOCK. WE WILL LOAD ONTO YOUR TRUCK AT OUR LOCATION UNSKIDDED AT NO ADDITIONAL CHARGE, WE WILL CHARGE $ 150 FOR A CUSTOME SKID. THIS MACHINE WILL NEED TO GO FLATBED OR CONESTOGA DUE TO THE WEIGHT. MOST FLATBED COMPANIES DO NOT REQUIRE A SKID FOR TRANSPORT.
|
|
|
Cincinnati vertical milling machine 28" & 16" series parts & manuals
There are two books in this order. Pricing is based on individual booklet. 1. Cincinnati 28" Series Vertical Hydro-tel milling machine(M-1469-1) 2. Cincinnati 16" Series Vertical Hydro-tel milling machine(M-2198)
|
|
|
Cincinnati #2 Vertical Head fits Horizontal milling machine Nmtb 50 With Drive
Used Cincinnati#2 horizontal milling machine vertical head attachment with draw bar. And nmtb 50 drive adaptor gear. Head is in decent used condition spins smooth, drive gears look good. Came from a machine with the dove tail overarm. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a freight shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. ... moreDue to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with
|
|
|
CINCINNATI MILACRON ARROW 1500 VERTICAL MACHINING CENTER W ACRAMATIC 2100
For Sale! 1999 CINCINNATI MILACRON ARROW 1500 VERTICAL MACHINING CENTER W ACRAMATIC 2100 CONTROL(OC356) Specifications: NOMINAL SPECS. MUST BE VERIFIED Acra 2100 CNC w/CRT. X=60" Y=30" Z=30" 21 ATC. 30" x 64" Table, 8000 RPM. 15HP. Thru Spindle Coolant, New 1999 CALL OR EMAIL FOR MORE INFORMATION. 1800 573 7019 General Information: You can preview unit at our warehouse in Southern. California. Call to schedule an appointment- Payment can be made by: Certified checks. Company Checks, Wire transfer, direct deposit, Credit Card or Paypal. Call or email for more payment details* We have freight assistance via: LTL. Full Trucks, Flat Bed and local delivery. Call or email to request a quote- All purchases less than 150 lbs will ship UPS. Fedex or USP S. FREE LOADING AND PACKAGING IN ALL PURCHASES) CALL. TEXT OR EMAIL WITH ... moreQUESTIONS. 1800 573 7019* SE HABLA ESPAÑOL* Visit our eBay store A GLOBE ENTERPRISES INC. COMPANY www.orangecountymachinery.com Toll Free#1800 573 7019 Text#714 658 5390 Fax#909 989 4107
|
|
|
Vertical drill - mill head from old Cincinnati horizontal milling machine
This head came on my old Cincinnati#2 horizontal miller when I got it some 20 years ago. The auction is for the head as shown in the first picture. The last two photos show how it was installed. The milling machine has been scrapped, it is not included here. Not much info on the head, two brass plates, on stamped A101, the other"Timken bearing equipped" The end of the spindle has a#3 morse taper, the drawbar hold this chuck in tight. The chuck has a 3/4" straight bore. Both drawbar& chuck are included. The large collar is 4 1/4" bore, it fir on the horizontal arm of the miller as shown. There are degree markings all around the collar. The motor is 3 phase, 1/2 hp, 230/460 volt. It is 1140 rpm. This unit always worked fine for me, I used it mostly as a drill press, I did a little light milling, but the table on the ... moremiller was so shot it was hard to get accuracy. As this sits, it's about 100 pounds. I will separate the motor from it and send it ups ground in two boxes. If you don't want the 3 phase motor, let me know after the auction ends, the shipping will go down some for sure. If you have any questions, please ask, I will do my best for answers. The shipping rate shown is for ONE 50 pound box, if you want the motor& the head, this will be doubled for two boxes. I will send at cost, I never tack on extra fees. Local pickup is of course free.
|
|
|
CINCINNATI MILACRON Arrow 1000 CNC Vertical Machining Center (New 1999)
Model: Arrow 1000. CINCINNATI MILACRON Vertical Machining Center, S/N: 7049-A00-99-0769(New 1999) Specifications: Table working surface Table load capacity Longitudinal table travel(X) Cross table travel(Y) Vertical travel. Spindle carrier(Z) Spindle speed range. Infinitely variable Spindle taper Cutting feed rate(X. Y, Z) Rapid feed rate(X. Y, Z) Number of stations in automatic toolchanger 22" x 44" 1.540 Lbs. 40" 20" 22" 60 to 8.000 R.P.M. CAT 40.1 to 472 I.P.M. 787 I.P.M. 21 Equipped With: SIEMENS Acramatic A2100 three-axis CNC control with hand-held operator's pendant. 3.5" floppy disc drive. RS-232 port, and touch screen programming Twenty-one station automatic tool changer Rigid tapping AC Servo motors Full machine enclosure Work light Leveling pads Automatic lubrication system JORGENSEN combination ... morechip conveyor and external coolant pump and tank 15 H.P. AC spindle motor and electrical controls Machine is wired for 3/60/220 volt operation. Approximate Weight: 10.000 Lbs. Approximate Dimensions(Machine Only) 122" L-R x 89" F-B x 103" H Location: F.O.B. Truck. Hauppauge- Long Island, NY- We Ship Worldwide Reference# XWY_GM3155
|
|
|
CINCINNATI MILACRON Arrow 1000 CNC Vertical Machining Center (New 3/1998)
This machine is currently in a votech. It has been lightly used since it is a school, it weighs just at 10000 pounds, I had a good talk with the instructor today and he stated that the machine worked good except that once in a while it would just shut down, he said they would turn it off and start it over again and it might not happen for months, it needs to be removed the first week in December, it is located in Nw Oklahoma City, they have a lift to place it on your trailer. Any questions just ask.I have more photos of the machine, email if you want to see them, the jorgenson conveyor goes with it, it comes with the transformer, I will not ship it!
|
|
|
307-14 CINCINNATI CINOVA 801 Vertical Milling Machine
Inventory# 6208 307-14 CINCINNATI CINOVA 801. 14" X 63" TABLE,50NST, 2000RPM, POWER DOWN FEED, RAPID, 1968 Table working surface 14"x63" Range: Longitudinal: 34" Cross: 12" Vertical. Knee: 14" Vertical. Head: 4" Taper in spindle: No.50 Distance spindle nose to table: 1"19" Throat: 7 9/16"19 9/16" 16 Spindle speeds: 25-2000 RPM Longitudinal& cross feeds: 30 IPM Vertical knee feeds: 1/8- 15 IPM Rapid traverse rate- longitudinal& cross: 150 IPM Rapid traverse rate- vertical knee: 75 IPM EQUIPPED WITH: Power down feed of vertical head with stops. Power rapid traverse Manual draw-bar. Coolant system, 1 H.P. feed Motor, 7 hp Spindle drive Motor Floor space: 112 13/16" LR x 70 7/8" FB x 70" High*See attached Warranty. Terms, Machine Use and Safety. These specifications ... moreare subject to verification upon inspection. 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14a44181c26-0x10c-
|
|
|
Cincinnati 2MH Horizontal Mill Milling Machine w/ Right Angle Vertical Head
Up for sale is a Cincinnati 2MH Horizontal Mill Milling Machine w/ Right Angle Vertical Head. This mill package includes several arbors and arbor supports. A right angle head, and the original manuals. It holds NMTB-50 holders and the vertical head holds NMTB-40 holders. Feel free to email any questions! LOCAL PICKUP ONLY* We can accommodate customer-arranged freight. SCT150102-10*
|
|
|
Cincinnati 550-20 vertical Vercipower milling machine
Very heavy duty vertical milling machine with extra height column and over-width table. Serial number 311053V78-001 New 1978 Table: 25" x 94" Table travel: 50" Max height under spindle: 37" Spindle speeds: 14-1400 rpm 50HP spindle drive Power drawbar Hard ground ways
|
|
|
Nice! Cincinnati Vertical/ Horizontal Milling Machine Arbor Support` 1" Arbor
Cincinnati Arbor Support 306187F Overall Size: 9.25" Top 3.75" Wide 9" Top to Bottom Dovetail on machine: Approx: 5-3/4" width at Bottom. 4-5/8" width at Top Dovetails at 45 degrees The arbor will tighten down 1/16" to 1/8" or a little more. Bushing Hole Size: 1" Keyway Size: 1/4" The item belongs to a friend. I am only helping them sell items from their business. Please excuse me if I am unable to answer any technical answers. Shipping: The shipping weight is 30 lbs. I will ship free in the United States in the 48 States. I will ship Internationally. International rated will vary. Local pickup is OK. I will ship economy mail. Buyer will pay for extra services. Free shipping is with full price offer only. Payment. Ebay accepted payments. Cash in person, money order, or paypal. Returns: Buyer has ... more14 Days to return item after receipt. Item must be returned in condition as sold. 20% restocking fee will apply. Buyer pays return shipping. Buyer will purchase item AS-IS-AS-IT-IS and all Sales Are Final after the return period is over.
|
|
 |