Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: AWS A5.9/A5.9M:2006 Wire Diameter: 0.035 inch (0.9mm) Center Hole Diameter: 2 inch Weight: 10 lbs Deposited chemical composition (wt%): ... moreC 0.08/Cr 19.5 - 22.0/Ni 9.0 - 11.0/Mo 0.75/Mn 1.0 - 2.5/Si 0.30 - 0.65/P 0.03/S 0.03/Cu 0.75 Compatibility: Application: Suitable for all position gas welding, butt weld and lap weld, for single or multiple pass welding Butt welding and fillet welding of carbon steel sheets and plates for industrial, agricultural, construction and automotive applications Welding types 304, 304L, 308, and 308L stainless steels .
Buy It Now
Free Shipping Condition: New Location: China The new disc needs to be filled with water, rubbed from the edge of the disc with 80 grit sandpaper, and polished with 240 grit sandpaper. The zinc disc ... moreneeds to be kept at a certain humidity and used with diamond grinding paste.
Buy It Now
$12.47 Shipping Condition: Used Location: Putnam, United States
Buy It Now
Condition: Used Location: Morris Plains, United States THE LATHE CAN ALSO BE PICKED UP. NO EXCEPTIONS.
Condition: Used Location: Gardner, United States The tempered aluminum lap plate is grooved in a criss-cross pattern which continuously refines and circulates the abrasive grits as they are crushed to ... moresmaller and smaller sizes between the lap plate and the workpiece.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States These diamond discs are one of the finest discs manufactured for Hobby, Lapidary, Glass applications. The Aluminum master lap for Diamond coated flat ... morelap disk grinding wheel, it is only a machine accessories.
Buy It Now
$39.99 Shipping Condition: Used Location: Lombard, United States Used condition with dings dents and scratches. Please see photos for details. Thanks for looking Shipping price to the lower 48 only
Buy It Now
$171.08 Shipping Condition: New Location: Madison Heights, United States Quality cast iron machinist lapping plate 12x16" size, 4" height.
Buy It Now
$12.88 Shipping Condition: Used Location: Millstadt, United States Condition - Good condition one is still wrapped in wax paper. Part Number - N/A. Ensure the item will fit your needs. Includes - Product Pictured. Inventory: ... moreBox F2. No PO boxes.
Buy It Now
$34.00 Shipping Condition: Used Location: San Diego, United States
Buy It Now
$9.00 Shipping Condition: New Location: China The Aluminum master lap for Diamond coated flat lap disk grinding wheel, it is only a machine accessories. The Aluminum master lap is only a machine accessories. ... moreThe material is 100% aluminum, no diamond coated on the surface.
Buy It Now
$87.34 Shipping Condition: New Location: Sterling Heights, United States newcast iron machinist lapping plate 12x16" size, 4" height. 50 lbs. Flatness within 0.01mm
Buy It Now
Condition: Used Location: Cincinnati, United States LAPMASTER PRECISION FLAT LAPPING MACHINE. (3) Adjustable Ring Roller Guides (Yokes). Variable Speed w/Speed Indicator. Three Ring Style Open Face Machine. ... more(3) New Cast Iron Serrated Conditioning Rings.
Buy It Now
$56.12 Shipping Condition: New Location: Hillsboro, United States WE HAVE A HUGE RANGE OF ACCESSORIES AVAILABLE FOR THIS CHASSIS, CHECK OUT DIKTATOR FOR ALL YOUR 2X72 NEEDS! CHASSIS ACCEPTS A WIDE RANGE OF 56C FACE MOTORS ... more(NOT INCLUDED). MADE IN THE USA QUALITY QUICK ASSEMBLY KIT.
Buy It Now
Free Shipping Condition: New Location: Chino, United States HITBOX 0.8mm Mig Wire Flux Cored Self-Shielded 1kg No Gas Wires Iron Welding Carbon Steel Gas-Less Mig Welder Accessories. Gas: gasless. Model: Flux cored ... morewire. Rust and corrosion resistant flux-cored welding wire(no gas) is for general purpose MIG welding of mild steel, thin carbon and carbon-manganese steels.
Buy It Now
Free Shipping Condition: New Location: Kazakhstan Lapping plate GOST 10905-86 with handles, accuracy class 1. This is a verification and layout plate made of cast iron used for checking and marking parts. ... moreThe weight of the plate is approx.
Buy It Now
$18.00 Shipping Condition: Used Location: Duncansville, United States Machinist Tool & Die Surface Lapping Plate. Shows signs of use with scuffs, scratches and rust spots. see pictures for condition.
Buy It Now
Free Shipping Condition: New Location: China Application: jade grinding, seals, carving knives, etc. Note: Sand on the front, no sand on the back. Made of high-quality materials for durability. 1 ... moresandpaper.
Buy It Now
$9.51 Shipping Condition: Used Location: Waterford, United States you get what you see except for the $1.used.3 are marked P& W(one has plastic covering it)the sizes of those are 2 3/16 by 1 3/4 by 1/4.and that single ... morepiece is 2 13/16 by 5/8 by 1/4.I will combine.Handling $1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plus $1 handling per auction or"buy it now" purchase. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
Buy It Now
$114.10 Shipping Condition: Seller refurbished Location: Brooklyn, United States Introducing a premium quality lapping plate that comes with removable side rails. This versatile item is perfect for metalworking inspection and measurement, ... moreas well as CNC manufacturing. It is a great addition to any workspace, whether for personal or business use. The plate is made of high-quality materials, ensuring durability and long-lasting use. It is suitable for surface plates, making it a valuable tool for anyone in the metalworking industry. Get your hands on this must-have item today!
Buy It Now
$8.60 Shipping Condition: New – Open box Location: Ocala, United States Made in China, this tool is designed to provide exceptional value for your money.
Buy It Now
Condition: Used Location: Eugene, United States
Buy It Now
Condition: Used Location: Cincinnati, United States LAPMASTER HEAVY DUTY BENCH MODEL LAPPING MACHINE. Lapmaster Electronic Dispensing System w/Solution Bottles. Lapping Plate Speed, Variable : 0 - 70 RPM. ... more(3) Adjustable Ring Roller Guides (Yokes). (3) Standard Cast Iron Conditioning Rings.
Buy It Now
$289.97 Shipping Condition: New Location: Hillsboro, United States Fast becoming the most popular grinder of its type on the market! TOOBINATOR: our chassis is powder coatedCompetitors: rattle can painted. TOOBINATOR: ... more3/8" thick steel D-plate (the part to which the idler wheels & platen connects).
Buy It Now
Condition: Used Location: Lincolnshire, United States Plumbed for Speedfam Slurry Tank and Pump Distributor with Manual and. Drive System: The machining plates and work carrier drives are variable speed. ... moreWork Carrier Motor. - Speed - Lower Plate.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Welding Coupons can be used for novices to practice welding and other technologies, with convenient operation, flexible use and strong adaptability. 3 ... more、 You can use Welding Coupons to weld anything you want, such as vases, pen containers, etc.
Buy It Now
$109.46 Shipping Condition: New Location: Hillsboro, United States BoltDAS TOOBINATOR & motor to a bench (not included), install a 2x72" grinding belt (not included) & you're ready to grind! We also have available a sturdy ... moresteel base plate if you prefer not to mount this permanently to a bench.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States These diamond discs are one of the finest discs manufactured for Hobby, Lapidary, Glass applications. Suitable to grinding gemstone, jewelry, glass, rock, ... morecarving knife, etc…. Also Available in Grits 60, 80, 100, 120, 150, 180, 240, 320, 400, 500, 600, 800,1000, 1200, 1500, 1800, 2000, 3000.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: AWS A5.9/A5.9M:2006 Wire Diameter: 0.035 inch (0.9mm) Center Hole Diameter: 2 inch Weight: 10 lbs Deposited chemical composition (wt%): ... moreC 0.08/Cr 19.5 - 22.0/Ni 9.0 - 11.0/Mo 0.75/Mn 1.0 - 2.5/Si 0.30 - 0.65/P 0.03/S 0.03/Cu 0.75 Compatibility: Application: Suitable for all position gas welding, butt weld and lap weld, for single or multiple pass welding Butt welding and fillet welding of carbon steel sheets and plates for industrial, agricultural, construction and automotive applications Welding types 304, 304L, 308, and 308L stainless steels .
Buy It Now
Free Shipping Condition: New Location: Largo, United States The weld face tends to be more convex and less uniform, especially since the welding speeds are higher. It is designed for welding roof decking to support ... morebeans and applications where burn-through spot welds are required.
Buy It Now
Free Shipping Condition: New Location: Mira Loma, United States Designed for grinding, blending, sanding and finishing on a wide range of material. D urable M aterial - This Flap Disc is constructed of industrial grade ... morehigh density premiumAluminum Oxide Abrasive material, increased durability than standard flap discs, built for a more robust and economical grinding wheel.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Gas: gasless. Rust and corrosion resistant flux-cored welding wire(no gas) is for general purpose MIG welding of mild steel, thin carbon and carbon-manganese ... moresteels. Easily removable slag, versatility; suitable for welding Galvanized & Zinc-Coated plates as well.
Buy It Now
$8.55 Shipping Condition: New Location: Hillsboro, United States 12.00 Platen Attachment for 2x72” or 2x48" Belt Sander/Grinder. First Grade Quality Product This is removable belt sander attachment used for a flat ... moregrinding. Good for belts 2” wide. Comes as pictured. Flat turned wheels are 2” outside diameter and 2-3/16” wide. Precision machined from aluminum. Ball bearings have 1/2” bore. This is a heavy duty attachment made from 3/8” steel. The plate is 12" high and approximately 6" wide. Its weight helps build a mass therefore improving stability of the Belt Sander For a slack belt grinding you need to remove Platen Plate. Removable Platen Plate size is 8" x 2" and 3/8" thick. It can be replaced with the plate of your choice(for example ceramic) This attachment can easily be adopted to many industrial belt sanders as well as an excellent part for any homemade Belt Sander Project. There might be a slight difference in colors and design which do not affect performance. It is just that I use photos from my previous listings because this item sells fast.
Buy It Now
Free Shipping Condition: New Location: China Application: jade grinding, seals, carving knives, etc. 1 diamond sandpaper. Gravel: 80#--3000# (optional). Note: Sand on the front, no sand on the back.
Buy It Now
$84.57 Shipping Condition: New Location: Hillsboro, United States ph327 1 hp motor 2x72 belt grinder this grinder has top of the line idlers wheels. aluminum core 70 duro contact wheels.Aluminum w/ polyurethane tread ... moretracking wheel and aluminum drive wheel. this set up is smooth running and the tracking is very stable. I have built over 350 belt grinders over the past 3 1/2 years and every detail of this model is fabricated for maximum performance.Handling and precision. 2x27 variable speed grinder w/ motor 1 HP. and variable speed controller. RPM 0-3450. 120 AC input. all steel frame welded at all joints.Very solid, precise belt control. INCLUDES 8" CONTACT WHEEL 2 wheeled FLAT PLATEN 1-HP MOTOR& VARIABLE SPEED DRIVE + tool rest tool arm can be taken out to use different size contact wheels or attachments. Comes with tool rest– 2 wheel flat platen- leeson or baldor motor 1 HP- variable speed drive- pre wired- Tracks well 4 wheel design for reduced vibration(think of two wheel design as‘tip of fishing rod’ vibration) Very Easy change over of platen or wheel/ accessories quick release tool arm& tool rest Easy adjustment of tool rest/ tracking etc Easy fast belt change- uses belts 2 x 72 up to 2x79 1 Direct drive(no belts or pulleys that cause/ vibration& rob 30 percent of the power) Drive wheel separate(speed does not change with contact wheel size) Takes 5.6, 8" or 10" and 12" contact wheels without any modification. Runs on 110 volt power from a regular wall outlet or ask for 220 volt foot print 13" x 22" fits small bench tops Available with other options like small wheel attachment and 1" small wheel for finger grooves add 150.00 dollars reasonably priced professional grade grinder steel frame is welded at all joints.Very solid. these belt grinders run smooth and don't make a lot of noise tracks perfect. Spring tension is adjustable. I make knives and make these grinders for knife makers. Speed control allows for greater control when doing detail work and reducing heat after blades are heat treated. I have used a grinder like
Buy It Now
Free Shipping Condition: New Location: China The Aluminum master lap for Diamond coated flat lap disk grinding wheel, it is only a machine accessories. Use the fine grit diamond lap pad to smooth ... moreand shape pieces and create polished flat surfaces.
Buy It Now
$8.55 Shipping Condition: New Location: Hillsboro, United States We cut these parts for a builders' group & we have a bunch left over. They are for the weld-it-yourself style tilting grinders. - Set of 4 plates (3/8" ... morethick) for the tilt grinder hinges. We have the other parts (all the plates, tubes & fasteners) of this build left over as well, as soon as we have the numbers of the surplus parts we'll list them for sale.
Buy It Now
$21.95 Shipping Condition: New Location: Hillsboro, United States We cut these side plates for a builders' group & we have a bunch left over. They are to be used with 2" square tubing as receptacles for the tooling arms. ... moreThe plate is 3/8" thick steel, precision laser cut.
Buy It Now
Free Shipping Condition: New Location: 金东区, China Application: jade grinding, seals, carving knives, etc. 1 diamond sandpaper. Note: Sand on the front, no sand on the back. Made of high-quality materials ... morefor durability.
Buy It Now
$130.96 Shipping Condition: New Location: Hillsboro, United States A professionally made Belt Grinder chassis based on the hugely popular EERF or GIB(grinder in a box) design. If you search EERF Grinder on Youtube you'll ... morefind tons of videos of these robust grinders. Please note that this is JUST the chassis for this type of grinder. You will get exactly only what you see in the pictures. To complete the grinder you will need to add an electric motor with a 56C face(I can tell you where to get these for fairly cheap) a platten of your choice(please see my other listings, I have a top quality flat platten listed for $155) a tracking wheel& a driving wheel to fit to the motor. What sets this chassis apart from the various projects that you will find on the internet is that this one has been machine welded in a jig which makes it far stronger&longer lasting than the bolt together units. It also has an industrial grade powder coat finish& it has also been upgraded with a 20lb gas-strut for tensioning the belt, instead of a spring(it has been drilled& tapped for eye-bolts should you rather want to install a spring but once you've used a gas-strut on a belt grinder you'll want nothing else! Uses any 2x72" sanding/grinding belt. If you search"EERF BELT GRINDER: part1" on Youtube& scroll down a few vid's you'll see a clip of one of our grinders. Almost exactly the same as the one listed here. Be sure to watch part2 as well!
Buy It Now
$100.49 Shipping Condition: Used Location: Millstadt, United States Specifications: 4" thick. Width - 20". Depth - 20". inventory: Palate 15. No PO boxes. Approximate Weight - 125 lbs.
Buy It Now
Free Shipping Condition: New Location: 金东区, China Application: jade grinding, seals, carving knives, etc. 1 diamond sandpaper. Note: Sand on the front, no sand on the back. Made of high-quality materials ... morefor durability.
Buy It Now
$88.38 Shipping Condition: New Location: Hillsboro, United States 2x72 BELT GRINDER CHASSIS KIT. WE USE TOP QUALITY SPRING LOADED CLAMPING KNOBS TO SECURE OUR TOOLING ARMS. THE FEMALE THREADS ARE FLANGE NUTS WHICH ARE ... moreEASILY REPLACED WHEN WORN. (COMPETITORS:YOU HAVE TODRILL & TAP HOLES THROUGH THE 1/4" TUBES. ).
Buy It Now
Condition: Used Location: Lincolnshire, United States Drive Motor.26"(L-R) x 21"(F-B) x 22"(H). 15" Polishing Plate. Item Dispute will be opened. Preliminary Specifications Subject to Verification. Speed ... more- Standard. Ring ID.
Buy It Now
$16.89 Shipping Condition: Used Location: Fruita, United States Up for sale is a Grooved Machinist Tool & Die Surface Lapping Plate. Shows signs of use with scuffs, scratches and worn spots.
Buy It Now
Condition: Used Location: Raleigh, United States Engis FL-15 Fastlap Hyprez Lapping Polisher.
Buy It Now
$202.56 Shipping Condition: New Location: Hillsboro, United States STEEL BASE PLATE. MINOR ASSEMBLY IS REQUIRED . USES STANDARD 1.5" SQUARE TOOLING ARMS. PADDLE STYLE SAFETY SWITCH. Fast becoming the most popular entry ... morelevel or back up chassis on the market!
Buy It Now
$104.66 Shipping Condition: New Location: Hillsboro, United States A professionally made Belt Grinder chassis based on the hugely popular EERF or GIB(grinder in a box) design. If you search EERF Grinder on Youtube you'll ... morefind tons of videos of these robust grinders. Please note that this is JUST the chassis for this type of grinder. You will get exactly only what you see in the pictures. To complete the grinder you will need to add an electric motor with a 56C face(I can tell you where to get these for fairly cheap) a platten of your choice(please see my other listings, I have a top quality flat platten listed for $155) a tracking wheel& a driving wheel to fit to the motor. What sets this chassis apart from the various projects that you will find on the internet is that this one has been machine welded in a jig which makes it far stronger&longer lasting than the bolt together units. It also has an industrial grade powder coat finish& it has also been upgraded with a 20lb gas-strut for tensioning the belt, instead of a spring(it has been drilled& tapped for eye-bolts should you rather want to install a spring but once you've used a gas-strut on a belt grinder you'll want nothing else! Uses any 2x72" sanding/grinding belt. If you search"EERF BELT GRINDER: part1" on Youtube& scroll down a few vid's you'll see a clip of one of our grinders. Almost exactly the same as the one listed here. Be sure to watch part2 as well!
Buy It Now
Free Shipping Condition: New Location: Canada 【HIGHER CUTTING EFFICIENCY】Using the thinnest outer 1mm hexagon nut lock bearing, it can be chamfered in the narrowest and shallowest space, suitable ... morefor various angles, such as straight edge chamfering, inner and outer round hole chamfering, irregular chamfering, keyway Polygon chamfer.
Buy It Now
Condition: Used Location: Santa Clara, United States User-friendly and economically viable, it demands minimal maintenance, ensuring seamless operation.
Buy It Now
Free Shipping Condition: Used Location: North Platte, United States Lapmaster Flatness Gauge 10251BJ-LAP Dial Indicator & Flat Plate 6in dia with Case. Lapmaster flatness gauge is used but in good condition. Surface of ... morethe flat plate does have some very light scuffs and scratches. Threaded hole on the bottom of the flat plate has no flaws. Dial indicator assembly functions as expected. Case is in excellent condition, clamps and handle well intact. Item shipped through USPS or UPS. Please contact me if any flaws or mistakes arise; I will be happy to help. Also, please view photos for the best description of condition and specs. Overall the item is in great condition. Free shipping only to the lower 48 states. Feel free to contact me with any questions concerning an item. Refunds and returns do occur and will be treated fairly as possible.
Buy It Now
$70.00 Shipping Condition: New Location: Saint Charles, United States Failure to properly maintain and/or properly operate the product or part under normal conditions will void this warranty. This warranty does not cover ... moreany product or part that has been worn out, abused, heated, ground or otherwise modified, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use.
Buy It Now
Condition: Used Location: Harrison, United States 24" ENGIS-HYPREZ LAPPING MACHINE. 24" LAPPING PLATE. PNEUMATIC LIFTS. Machine Location:HARRISON, NJ.
Buy It Now
$100.01 Shipping Condition: New Location: Hillsboro, United States For DIKTATOR weld-it-yourself 2x72" belt grinder. All in 3/8" thick steel, laser cut Side plate, with hex holes to capture 5/16-18 Flange nuts.
Buy It Now
Free Shipping Condition: Used Location: Campbellsville, United States
Buy It Now
$14.95 Shipping Condition: New – Open box Location: Oklahoma City, United States
Buy It Now
Free Shipping Condition: New Location: 金东区, China Application: jade grinding, seals, carving knives, etc. 1 diamond sandpaper. Note: Sand on the front, no sand on the back. The real color of the item ... moremay be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Grit : 1 200 ( Very Fine). Suitable to grinding gemstone, jewelry, glass, rock, carving knife, etc…. Diamond coating surface area : almost 95%,only one ... moreside is coated diamond. Also Available in Grits 60, 80, 100, 120, 150, 180, 240, 320, 400, 500, 600, 800,1000, 1200, 1500, 1800, 2000, 3000.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifics and features: 3-inch 4 Jaw Chuck 1-inch by 8 TPI: This self-centering style 4-Jaw Chuck has reversible stepped jaws for internally or externally ... moreholding a variety of round or square workpiece sizes. Setup is quick and easy by twisting the knurled adjustment plate on the back of the chuck. Two 4-inch wrenches are included for final tightening. Standard 1-inch by 8 TPI Threads: The chuck fits all wood lathes with 1-inch x 8 TPI spindles.Self-Centering. Threaded chucks allow for quick and easy mounting and dismounting saving you time while switching between applications. Reversible Stepped Jaws:.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Gas: gasless. Model: Flux cored wire. Rust and corrosion-resistant flux-cored welding wire(no gas) are for general-purpose MIG welding of mild steel, ... morethin carbon, and carbon-manganese steel. Easily removable slag, versatility; suitable for welding Galvanized & Zinc-Coated plates as well.
|