|
3-7/8" L1 TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
3-7/8" L1 TRICONE BIT TURNS FREE NOT SLOPPY On Dec-22-12 at 16:18:28 PST. Seller added the following information: Posted with
|
|
|
4-3/4" L2 TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
4-3/4" L2 TRICONE BIT TURNS FREE NOT SLOPPY On Dec-22-12 at 16:18:28 PST. Seller added the following information:
|
|
|
8-3/4" TRICONE BUTTON BIT OIL GAS WATER DRILLING RIIG EQUIPMENT TOOLS
8-3/4" TUNGSTEN CARBIDE TRICONE BUTTON BIT CONES TURNS GOOD SEALS ARE GOOD AND TIGHT.
|
|
|
4-5/8" SEALED BEARING TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT
4-5/8" SEALED BEARING TRICONE BIT On Dec-22-12 at 16:18:28 PST. Seller added the following information: Posted with
|
|
|
4-3/4" ETD4RC SEALED BEARING BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS RIG
4-3/4" ETD4RC SEALED BEARING TRICONE BIT SEALS ARE GOOD.
|
|
|
4-7/8" L2 TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
4-7/8" L2 TRICONE BIT TURNS FREE NOT SLOPPY 1 ROLL ON THE OUT SIDE IS CHIPPED IT IS IN THE PICTURES THANKS On Dec-22-12 at 16:18:28 PST. Seller added the following information: Posted with
|
|
|
Drill Pipe 2 7/8 Amer Open Hole Double White Band oil gas equipment WILL TRADE
WILL TRADE FOR 3 1/2 I F Drill Pipe 2 7/8 American Open Hole Double White Band Average Length 31 feet and 56 joints( 1736 feet approximately) 7.00 per foot. Contact me please with ANY questions or suggestions. I should respond quickly. This is really great pipe as you can see and is in good shape but we purchased another rig and now need 3 1/2. $1000.00 deposit required via paypal if you make an offer and we agree upon total. Depending upon your location we can arrange payment to my bank when or before you pick up in Abilene. Texas- If you're in the drilling business or are going to re-sale this for more money you know how this procedure works. Thanks for viewing and good luck. Tina Marie Lawrence Energy*
|
|
|
2 3/8" X 2 3/8" CONNECTION OIL GAS WATER WELL DRILLING RIG EQUIPMENT TOOLS
2 3/8" X 2 3/8" CONNECTION
|
|
|
2 3/8" X 3" SUB OIL GAS WELL DRILLING EQUIPMENT TOOLS REG
NEW NEVER USED 2 3/8" X 3" SUB 2-3/8" PIN
|
|
|
AZONIX PROPANEL PRO PANEL USED 2499! OIL WELL DRILLING EQUIPMENT! WIN-2K
DONT KNOW WORKING CONDITION SO.I DONT KNOW HOW TO TEST. NO REASONABLE OFFER REFUSED! LETS DEAL! TAG SAYS MODEL MP2500SA/05-UDC-TFT12SV-NFI-P3/600-256M-F2GB-N4 SERIAL 20388 VERSION WIN-2K POWER?36VDC.12.5 A, 25A INRUSH. HAS PLUG IN THATS ABOUT A LITTLE BIGGER THEN A QUARTER WITH ABOUT 50 SMALL PLUG INS INSIDE THE QUARTER AND A CAP WHEN NOT IN USES,THEN THEIRS ONE PLUG WITH CAP BY ITSELF WITH A FOUR PRONG ON INSIDE A LITTLE SMALLER THEN A DIME,THEN TWO PLUGS WITH A HOLE FOR ONE CONNECTOR,LITTLE SMALLER THEN DIME,THEN ONE SEVEN PRONG AND ONE 4 INSERT PRONG CONNECTER,BOTH A LITTLE SMALLER THEN DIME,PICTURES COMING.
|
|
|
4 1/2" TRICONE ROCK BIT 2 3/8" PIN OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
4 1/2" TRICONE BIT CONES TURN FREE On Dec-22-12 at 16:18:28 PST. Seller added the following information: Posted with
|
|
|
Equipment Brochure - Spang - Weld Drill Pipe Tool Joints Oil Gas - 1953 (EB425)
Oil Well Drilling Equipment Brochure- Spang-Chalfant- National Supply Company- Spangweld Drill Pipe and Tool Joints- Spang Double-Seal Shrink Thread Drill Pipe and Tool Joints- 24 Pages- Code: Bulletin No. 385. 1-53-10, Copyright 1953- interpret as 1953 from the code) approx. 11 x 8.5 inch sized pages- 4 Colour with Black& White photos- Maintenance Shop Fresh" slightly musty with areas of smudging& contact marks on the exterior- rust on staples and on paper in immediate vicinity- all text is quite readable and colours are quite vivid. Payment to be via Paypal ONLY. No other payment terms will be accepted and please do not ask for exceptions. We will combine multiple wins and help reduce shipping charges for combination shipments where possible. Not responsible for shipments lost in mail. Items are sent via regular air mail unless ... morebidder has requested and paid for higher class shipping and/ or tracking means. Please look through our Store Listings as well as the weekly auctions. Thanks for looking and for bidding! Powered by
|
|
|
Equipment Brochure - Reed - Drill Collars - Oil Gas Drilling - 1950 (EB421)
Oil Well Drilling Equipment Brochure- Reed Roller Bit Company. Houston, Texas- Reed Drill Collars- 12 Pages- Code: Bulletin DC-NO. 450, G7500- 7-50- interpret as 1950 from the code) approx. 11 x 8.5 inch sized pages- 3 Colour with Black& White photos- Maintenance Shop Fresh" slightly musty- rust on staples and on paper in immediate vicinity- all text is quite readable and colours are quite vivid. Covers with text and excellent descriptive photos: HiFlex treatment for Drill Collars. Integral Connection Drill Collars. Super Connection Drill Collars. Care and Maintenance of Drill Collars. Payment to be via Paypal ONLY. No other payment terms will be accepted and please do not ask for exceptions. We will combine multiple wins and help reduce shipping charges for combination shipments where possible. Not responsible for shipments lost ... morein mail. Items are sent via regular air mail unless bidder has requested and paid for higher class shipping and/ or tracking means. Please look through our Store Listings as well as the weekly auctions. Thanks for looking and for bidding! Powered by
|
|
|
3-7/8" TRI-CONE ROTARY ROCK DRILL BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
This is a 3-7/8" TRI-CONE rock drill bit for drilling wells(water. Oil, etc? in overall good uncleaned original USED condition, from an estate auction in Springfield, MO. All three cones are tight and secure, and all three cone cutters spin smoothly and freely(NO wobbling or wiggling) The mounting threads also appear to be in good used shape. There are scuffs, scrapes, soil, and some normal expected wear to the cutting'teeth' from use, all as pictured, but it appears to be in overall very good usable condition. I don't really know anything about these kinds of things, so we'll let the pictures do the talking. PLEASE ZOOM IN& CLOSELY EXAMINE ALL 12 PHOTOS TAKEN FROM VARIOUS ANGLES FOR BEST VISUAL DESCRIPTION OF ACTUAL ITEM& CONDITION(soda can is for size comparison only) MEASUREMENTS: Approx 6" high; 3-7/8" ... morewidest(across the 3 cones) about 2" bottom diameter(or 1-1/4" inside bottom opening that would fit on drill. I don't know the correct terminology) Each of the 3 cutter cones is approx 2-1/2" diameter. Weight(without packing) is 7-1/2 pounds. The numbers stamped on the bottom are worn. But it looks like"HK 30707. and also"512" but can't be sure, as the stamping is quite worn) Again, please examine all photos for best visual description of actual item you will receive. Any color variation, distortion, shadows, blurs or other spots not mentioned are from camera flash glare/reflection. Please see our other items on ebay- we love to COMBINE SHIPPING when possible(with compatible items) International Buyers- Please Note(per eBay rules/regs) Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipp
|
|
|
6 1/8" OFM TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
6 1/8" OFM TRICONE ROCK BIT PIN 3 1/2" API BUY 2 OR MORE. FREE SHIPPING On Dec-22-12 at 16:18:28 PST. Seller added the following information:
|
|
|
3 3/4" TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT REG TOOLS
3 3/4" TRICONE ROCK BIT TURNS FREE NOT SLOPPY BUY 2 OR MORE ITEMS. FREE SHIPPING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13ec7bd87f0-0xfc-
|
|
|
4 5/8" ETD4RC SEALED BEARING BIT OIL GAS WATER WELL DRILLING EQUIPMENT REG TOOLS
4 5/8" ETD4RC SEALED BEARING BIT NICE
|
|
|
4 3/4" JZ SEALED BEARING BIT OIL GAS WATER WELL DRILLING EQUIPMENT REG TOOLS
4 3/4" JZ SEALED BEARING BIT NICE LIKE NEW USED VERY LITTLE.
|
|
|
4 3/4" MILL DRILLING BIT OIL GAS WATER DRILL REG EQUIPMENT TOOLS TRICONE
4 3/4" MILL 2 3/8" REG CONNECTION LIKE NEW
|
|
|
6 1/8" L2 TRICONE DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS REG
6 1/8" L2 TRICONE DRILLING BIT TURNS FREE NOT SLOPPY THE BIT IS USED AND HAS SOME WEAR? ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ee878ff56-0x103-
|
|
|
4 3/4" SEALED BEARING TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 3/4" JZ SEALED BEARING TRICONE BIT NICE.
|
|
|
100lb Tricone Drill Bit 8 3/4" Oil Water Gas Drilling Equipment
Up for consideration is a used tricone drill bit. 8 3/4" in diameter and 15" long. Cones are free turning. Obtained at an estate sale. Very cool piece and would make a great display item for any collector ~ BIN or Make an Offer ~ thanks Buy with Confidence{ see feedback} Shipping will be a flat rate for everyone within the lower 48 states via FedEx 2-5 days. Insurance for the amount purchased and delivery confirmation included. Carefully Packaged and shipped within 48 hours of payment cleared. I accept Paypal only. Payment due within 48 hours of auction ending ~ thanks I take great pride in selling only good quality items. If there is a problem upon delivery please contact me asap. I will do my best to make sure you are completely happy with your purchase. Thanks for looking and please ask any questions!
|
|
|
8 3/4" VINTAGE TRICONE DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS REG
8 3/4" VINTAGE OR ANTIQUE TRICONE DRILLING BIT CONES DO NOT TURN. THANKS
|
|
|
4-5/8" L2 TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
4-5/8" L2 TRICONE BIT TURNS FREE NOT SLOPPY On Dec-22-12 at 16:18:28 PST. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13f2f359988-0xf6-
|
|
|
4-5/8" FB1 DRILLING BIT 2-7/8" PIN OIL GAS WATER WELL EQUIPMENT TOOLS REG
4-5/8" FB1 DRILLING BIT 2-7/8 PIN ORGINAL CARBIDE INSERTS Posted with
|
|
|
4 5/8" ETD4RC DRILL BIT 2 7/8" PIN OIL GAS WELL EQUIPMENT REG TOOLS
4 5/8" ETD4RC SEALED BEARING BIT 2 7/8" PIN NICE a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13f56e61e5c-0xd4-
|
|
|
2 7/8" X 2 3/8" BOX SUB OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
2 7/8" X 2 3/8" BOX SUB THE MACHINE SHOP MADE REPAIRS ON THE SUB
|
|
|
1929 Star No. 45 Heavy Duty Spudder Oil Drilling Equipment Sales Brochure
I am offering for sale. A 1929-1930. Sales Brochure, for the Star No. 45 Heavy Duty Spudder, Oil Drilling Equipment, Star Drilling Co. Akron, Ohio. It is in Fair to Good Condition. 8 1/2 x 11 inches, folds out to 17 x 22 inches, fold line tears, some soiling, great graphics. I am selling this week. A Nice Selection of Vintage Paper, including Toy Catalogs, Farm Machinery Sales Literature, other Advertising, Autographs, and Post Cards. I will combine shipping and accept other methods of payment. Keep looking, as I will be listing items Sunday thru Tuesday. Thanks for looking. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14006186b6a-0xfc-
|
|
|
ANTIQUE VINTAGE OIL DRILL 3 7/8 BIT L1 WATER WELL DRILLING RIG EQUIPMENT 74772
ITEM UP FOR BID IS AN ANTIQUE VINTAGE OIL DRILL 3 7/8 BIT L1 WATER WELL DRILLING RIG EQUIPMENT 74772. THIS DRILL IS SOLD AS IS. IT IS OLD AND ANTIQUE AND NOT SURE OF WORKING ORDER. PLEASE DON'T HESITATE TO EMAIL WITH ANY QUESTIONS. WINNING BIDDER WILL RECEIVE ITEM(S) DESCRIBED AND PICTURED IN SCANS. SHIPPING WILL BE $12.95 FOR THIS AUCTION. COMBINED SHIPPING IS AVAILABLE ON ADDITIONAL AUCTIONS WON. ITEM(S) WILL BE SHIPPED IN BUBBLE ENVELOPE AND/OR PROTECTIVE BOX FOR SAFEST POSSIBLE TRAVEL. PLEASE EMAIL WITH ANY QUESTIONS AND THANKS FOR LOOKING. Check out my! Be sure to add me to your! by adding my eBay Store to your Favorites
|
|
|
3 1/2" X 4 1/2" PIN TO BOX SUB OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
3 1/2" X 4 1/2" PIN TO BOX SUB
|
|
|
Drilling Bit for Water Well, Oil, Gas Drilling Equipment Tool Svedala Rock Tools
Up for bid is this drilling bit. It can be used to drill a water well or a gas or oil well. It is 9 inches tall. The measurement across at the top of the thread is 3.5 inches. At the top where the bits are it measures 4.25 inches across. It has a sticker on it that says Svedala Rock Tools. Thanks for looking and good luck bidding. I offer 100% money back guarantee if not satisfied with item. Item will ship within 3 days once payment is made. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14070442ac6-0x100-
|
|
|
4 3/4" 3 WAY CHEVRON BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS RIG
4 3/4" 3-WAY CHEVRON BIT. 2 7/8" REG PIN, A FUW CHIPS LOOK AT THE PICTURES THANKS.
|
|
|
4 3/4" ETD4 RC SEALED BEARING BIT OIL GAS WATER WELL DRILLING EQUIPMENT
4 3/4" ETD4 RC SEALED BEARING BIT:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14079d7798c-0xf3-
|
|
|
TWO VINTAGE OIL DRILLS 3-3/4 BITS L2 WATER WELL DRILLING RIG EQUIPMENT 72895
VINTAGE OIL DRILLS 3-3/4 BITS L2 WATER WELL DRILLING RIG EQUIPMENT 72895 Sold as is with no returns or refunds. Check out my other listing for a larger bit. I will always be happy to combine shipping. Questions are always welcome. Shipping weight will be 12 pounds so the shipping cost must reflect this.
|
|
|
VINTAGE OIL DRILL 6-1/8 BIT V1 G WATER WELL DRILLING RIG EQUIPMENT 146640
VINTAGE OIL DRILL 6-1/8 BIT V1 G WATER WELL DRILLING RIG EQUIPMENT 146640 Sold as is with no returns or refunds. Check out my other listing for two smaller bits. I will always be happy to combine shipping. Questions are always welcome. Shipping weight will be 25 pounds so the shipping cost must reflect this.
|
|
|
3 7/8" DT4RC SEALED BEARING BIT OIL GAS WATER WELL EQUIPMENT TOOLS
USED 3 7/8" DT4RC SEALED BEARING BIT SOME CHIPPED TEETH AND THE SEALS ARE GOOD
|
|
|
4 1/2" FB1CS DRILLING BIT OIL GAS WATER EQUIPMENT TOOLS
4 1/2" FB1CS DRILLING BIT 2 3/8" REG PIN
|
|
|
4 3/4" FBI DRILL BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 3/4" FBI DRILLING BIT
|
|
|
4 5/8" FBI DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS
4 5/8" FBI DRILLIN
|
|
|
6 1/8" TCI TRICONE BUTTON BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
6 1/8" HUGHES STX-MCDX TRICONE BUTTON BIT. SEALS ARE GOOD AND TIGHT SHIP USA LOWER 48 STATES ONLY THANKS
|
|
|
8 3/4" SEALED BEARING TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
8 3/4" HUGHS GXD-28 TRICONE BIT SEALS ARE GOOD AND TIGHT. SHIP TO USA LOWER 48 STATES ONLY.
|
|
|
Rare "OILWELL" Machinery & Equipment - Oil Well Supply Catalog 1952-53 Edition!
Description Welcome To My Oilwell Supply Catalog Auction! This rare catalog in book form has a hardbound cover. Measures 11" x 8 1/2" and has 138 pages. The company was a Division of the United States Steel Co. All the pages are excellent. The front cover picture has some damage, and the binding edge has a small area of damage at the E in oilwell. NO 1ST CLASS INTERNATIONAL SHIPPING! Photos are of the actual product listed. Ask any questions BEFORE YOU BID! Yes. I will ship internationally! Please be aware that there are NO-REFUNDS or RETURNS when shipping to international addresses! THANKS FOR LOOKING! I will offer Combined Shipping only when ALL items are paid for together! Please review our policies below before bidding. Shipping charges for the U.S. are listed below. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141be9be308-0x105-
|
|
|
Unit Rig Oil Well Drilling Equipment Watch Fob Pre WWII
Please see all images. For questions 812 320 9862. All Original. Measures 2.25 inches long. For emergency questions about any of our listings please call 812 320 9862. Please read the entire write-up. We do accept all forms of payment except Am Express as shown in the ebay supplied form. If you do not live in the US please write us for shipping fees before bidding. Foreign bidders will also need to pay with paypal only. We sell our items at antique shows. Antique malls and over the internet so we reserve the right to pull an item at any time if it sells through another sale. eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 3/4" XG BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 3/4" XG BIT 2 7/8" API REG CONNECTION(LIKE NEW)
|
|
|
4 1/2" L2 TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 1/2" L2 TRICONE BIT TURNS FREE NOT SLOPPY
|
|
|
King Oil Tools Elevator Pipe Elevator Oilfield Tools Drilling Equipment Well
Nice set of King pipe elevators. Measure a little over 1 1/2 inches. Please check out our other oil tools we will be listing for 3 days only. We can only combine shipping on small items. Thanks.
|
|
|
4 1/2" SEALED BEARING TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 1/2" SEALED BEARING TRICONE BIT 2 3/8" REG CONNECTION On Oct-25-13 at 00:03:02 PDT. Seller added the following information:
|
|
|
CHANGE OVER SUB 2 3/8" X 3' OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
CHANGE OVER SUB 2 3/8" BOX END 3" REG PIN THREADS PER 1" 8 OD 3 1/2" OAL 17 1/2" Check out my! By adding my eBay Store to your Favorites.
|
|
|
7 7/8 tricone drilling bit oil gas water well equipment oilfield tools drill bit
This bit measures about 12" tall and 8" wide it is used and weighs just over 62 pounds. Please review the pictures and ask any questions before bidding or end of auction. Oklahoma residents there will be 8.35% sales tax applied to the invoice. International buyers you will be responsible for any and all fees that may be due through customs. Item will ship within 24 hours of payment being made. Item must be paid within 3 days of auction ending. If payment can not be made because there is a problem please contact me and I will try to work with you. If no contact or payment has not been made within 3 days a case will be started. We will only ship to the PayPal address that the payment was made with. No exceptions. International buyers we will not mark as a gift or change the amount the item sold for. Simple Treasures L.L.C. 404 N. ... moreGrand Ave. Enid. OK. 73701 580-747-4158,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1421c08377b-0xf8-
|
|
|
4 3/4" L2 TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS REG
4 3/4" L2 TRICONE BIT TURNS FREE NOT SLOPPY#3
|
|
|
4 5/8" XG BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 5/8" XG BIT 2 7/8" API REG CONNECTION Posted with
|
|
|
4 1/2" ETD4-RC SEALED BEARING TRICONE BIT OIL GAS WATER DRILLING EQUIPMENT TOOLS
USED 4 1/2" ETD4-RC TRICONE BIT SEALS ARE GOOD 2 3/8" REG CONNECTION Posted with
|
|
|
SUB 4 RD OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
SUB 4 THREAD PER INCH LOOK AT THE PICTURES FOR SIZES
|
|
|
2 3/8" NIPPLE @ COUPLING OIL GAS WATER WELL EQUIPMENT AND TOOL
2 3/8" EUE NIPPLES@ COUPLING
|
|
|
2 3/8" EUE COUPLING OIL GAS WATER WELL EQUIPMENT AND TOOL
2 3/8" EUE COUPLING TTE 5CT 0741 1002 LQ HNO 3904570
|
|
|
Halliburton Measuring Device Oilfield Tools Drilling Equipment Gas & Oil Tools
Nice Halliburton Measuring Device. Please check out our other tools and items being listed for 3 days only. Thanks.
|
|
|
3 5/8" FBI BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
3 5/8" FBI BIT 2 3/8" API REG CONNECTION Posted with
|
|
|
4-3/4" FB1 DRILLING BIT 2-7/8" PIN OIL GAS WATER WELL EQUIPMENT TOOLS REG
4-3/4" FB1 DRILLING BIT 2-7/8 PIN ORGINAL CARBIDE INSERTS Posted with
|
|
|
4 5/8" SEALED BEARING TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144cc4d01c8-0xf2-
|
|
|
4 1/2" XG BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 1/2" XG BIT 2 3/8" API REG CONNECTION Posted with
|
|
|
4 1/2" FBI BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 1/2" FBI BIT 2 3/8" API REG CONNECTION Posted with
|
|
|
4 1/2" OFM TRICONE BIT OIL GAS WATER DRILLING EQUIPMENT TOOLS
4 1/2" OFM TRICONE BIT THE PIN IS 2 3/8" API TRUNS FREE NOT SLOPPY
|
|
|
Vintage Oil Field & Pipe Line Equipment Catalog 1939 HUGE Volume Well Rig Drill
Vintage Oil Field& Pipe Line Equipment Catalog 1939 HUGE Volume Well Rig Drill OFFERED FOR AUCTION is this huge RARE volume of the 1939 COMPOSITE CATALOG OF OIL FIELD AND PIPE LINE EQUIPMENT Number 10 1939 Edition A CATALOG SERVICE for Manufacturers and Distributors of Oil and Gas Well and Pipe Line Equipment and Supplies. Supplementing catalogs heretofore issued which were representative of their line of manufacture, distribution, or services. Published and Printed in the U.S.A. by THE OIL WEEKLY. A Gulf Publishing Company Publicaton HOUSTON. TEXAS U.S.A. Copyright 1939 Pretty much everybody. Literally hundreds of manufacturers of consequence in the oil equipment industry in 1939 is represented within this catalog volume, from Hughes and Hunt Tools to Cummins Engine, Baker, Jefferson Union, Young Engine, Alfred Wirth, Moon Mfg. Parkersburg ... moreRig& Reel, Bethlehem Steel, McCullough, and so on and on. This hardcover book is bound in blue boards with raised lettering in gold on the spine and front cover. The front contains two Indexes- one by Manufacturer Index(hundreds) and one Classified Index that goes by product(thousands) Together the indexes alone comprise of the first 52 pages! There are hundreds of illustrations. Specs and company information within the catalogs that are contained in this bound book with over 2300 pages! Condition: the last page is number 2317 and it has detached and is still bound to the old back binding blank page along the left-hand edge. As is the first blank cover page. From the title page clear to the second to last page, all the pages are still bound together. The hardbound covering shows wear, the spine is detached down one side and there is some light staining, wrinkling on the first few pages and here and there along the top of the pages, yet this is very light and none seem to be stuck together and there is no bad odor and I don't see any mold. All are completely legible and overall I would say the Manufacturer's catalogs are in good to very good condition. I do not
|
|
|
Well Drilling Equipment Oil Gas Water Parts Wellhead Tank Ceramic Choke 32
This is a 32 ceramic choke to help manage the water flow into tanks. I have several of these. Mostly ceramic ones that I will be listing if there is a want for these. All of my items are from a pet and smoke friendly home. Please do not bid if that is a problem for you. I ship to lower 48 and use USPS only. I live in a small town and UPS and FedEx do not have offices in my town. I LOVE to combine shipping when possible so check out my other auctions! In order to combine shipping. You must paypal for items together in one transaction. I accept Paypal only and request payment within 48 hours. Items ship within 48 hours of payment. Thanks for checking out my auction! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14596099cec-0x110-
|
|
|
Well Drilling Equipment Oil Gas Water Parts Wellhead Tank Bull PLUG Taylor Valve
Plug used on casing with an on/off valve that turns smoothly and a taylor valve to take psi readings from. All of my items are from a pet and smoke friendly home. Please do not bid if that is a problem for you. I ship to lower 48 and use USPS only. I live in a small town and UPS and FedEx do not have offices in my town. I LOVE to combine shipping when possible so check out my other auctions! In order to combine shipping. You must paypal for items together in one transaction. I accept Paypal only and request payment within 48 hours. Items ship within 48 hours of payment. Thanks for checking out my auction!
|
|
|
Well Drilling Equipment Oil Gas Water Parts Wellhead Tank Choke 48
I don't think this one was ever used but it may have been. This is a 48 choke to help manage the water flow into tanks. I have several of these. Mostly ceramic ones that I will be listing if there is a want for these. All of my items are from a pet and smoke friendly home. Please do not bid if that is a problem for you. I ship to lower 48 and use USPS only. I live in a small town and UPS and FedEx do not have offices in my town. I LOVE to combine shipping when possible so check out my other auctions! In order to combine shipping. You must paypal for items together in one transaction. I accept Paypal only and request payment within 48 hours. Items ship within 48 hours of payment. Thanks for checking out my auction!
|
|
|
OIL GAS WATER WELL DRILLING EQUIPMENT TOOL TAKE A LOOK
I DON'T KNOW WHAT THE NAME OF THIS TOOL IS MAY BE AN ADAPTER EXTENSION. ALL I KNOW IS WE PURCHASED IT AT AN AUCTION ALONG WITH SOME OTHER WELL DRILL BITS AND IT APPEARS TO ATTACH TO THOSE SOMEHOW, SO IF YOU KNOW WHAT THIS IS AND NEED IT PLEASE BID ON IT. I KNOW IT MUST WEIGH AT LEAST 20# OR MORE BUT I PULLED A TAPE ON IT TO TAKE THE PICS WITH SO YOU WOULD HAVE AN IDEA ON THE MEASUREMENTS OF THIS PIECE.TAKE A LOOK AND BID. THIS PIECE IS BEING SOLD AS SINCE WE ARE NOT EXPERTS ON THESE KINDS OF THINGS.I KNOW THE BITS ARE VERY EXPENSIVE SO DON'T KNOW WHAT TO REALLY START THIS AT BUT YOU GUYS WHO KNOW THIS STUFF SHOULD BE ABLE TO BUY IT FOR A GOOD PRICE.PLEASE ASK QUESTIONS BEFORE BIDDING. I WILL SHIP ANYWHERE IN THE CONTINENTAL USA PRIORITY MAIL FOR 17.95:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-145bf572317-0xf1-
|
|
|
4-5/8" XG DRILLING BIT 2-7/8" PIN OIL GAS WATER WELL EQUIPMENT TOOLS REG
4-5/8" XG DRILLING BIT 2-7/8 PIN ORGINAL CARBIDE INSERTS Posted with
|
|
|
4 3/4" SEALED BEARING BIT OIL GAS WATER WELL DRILING EQUIPMENT TOOLS
4 3/4" SEALED BEARING BIT SEALS ARE GOOD
|
|
|
Transtore Oil Change Equipment Storage and Distribution Tank with Lincoln Pump.
Start you own oil change business! Has Lincoln Hose Reel part number 82206. Lincoln Digital Electronic Lube Meter part number 953. Lincoln Pump air actuated pump. Model 2535. Aluminum Cam Lock Filler Cap. Tank: Heavy duty 10 gauge construction, Standard blue enamel exterior, 22-1/2” diameter top fill opening with drum cover with 3” threaded fusible vent/fill cap installed in center of cover for UN31A compliance, EPDM lid gasket and plated steel bolted clamp ring, 2" patented TranSeal bung plug and EPDM gasket in the top for venting or filling, 1/2” patented sloped bottom for drainage, 2" bottom outlet with 2" 316 stainless steel ball valve. Shipping plug and patented stamped guard, Four(4) combination leg positioners/lifting lugs on the top of the tank, Four(4) legs providing 5-1/2” clearance, UN31A designed. Tested and labeled, ... moreLocated in Kilgore. Texas. You must pick up.
|
|
|
6 1/4 BUTTON BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
6 1/8" OPEN BEARING BUTTON BIT CONES TURN FREE
|
|
|
6 1/8 SEALED BEARING BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
6 1/8" SEALED BEARING BIT CONES TURN I THINK THE SEALS ARE GOOD? 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-146b60905d4-0x10b-
|
|
|
Tricone 3 3/4" Drill Drilling Bit Rock Water Well Oil Gas Equipment Tools #2
Selling With No Reserve! Hi! I have for Auction here a 3 3/4" Tricone Drilling Bit. The cutter cones are freed up but are still a little tight with some kind of varnish. I only see 2 chipped teeth. See Pictures. I'm selling it as is. Get yourself a great deal here. Local pick-up is always welcome! For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are ... morethe buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" with no warranty or guarantee. All sales carry a 14 day return policy that covers a refund of the purchase price minus a 15% restocking fee. You will be responsible for the return shipping for a refund. Item must be in its original box and packing and all contents just like you received the item or we will not refund the item. There are a few reasons we will except returns without paying a 15% restoc
|
|
|
6 1/8 DRILL BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS V TRI-CONE OILFIELD
The drill bit is not in mint condition. There are teeth missing and there is rust. This is being sold as décor or to be refurbished. Item will ship with in 1 business day(excluding Saturday. Sunday, and Holidays) Item must be paid within 3 days, if unpaid a case will be started. Returns are accepted only if the item is damage or not as described. Please contact me first before starting a case, to see if we can work it out. Please review the pictures and ask any questions before bidding or end of auction. Oklahoma residents there will be 8.35% sales tax applied to the invoice. International buyers you will be responsible for any and all fees that may be due through customs. We will only ship to the PayPal address that the payment was made with. No exceptions. International buyers we will not mark as a gift or change the amount the item ... moresold for. Simple Treasures L.L.C. 404 N. Grand Ave. Enid. OK. 73701 580-747-4158
|
|
|
8 3/4" CARBIDE CUTTERS DRILL BIT - OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
8 3/4" CARBIDE CUTTERS DRILL BIT- OIL GAS WATER WELL DRILLING EQUIPMENT TOOL. Little or no use- the 3 cutting heads heads are tight and they do turn. Very very heavy.
|
|
|
4 1/2" VH1 TRICONE DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS
USED 4 1/2" VH1 TRICONE DRILLING BIT TURN FREE NOT SLOPPY THANKS
|
|
|
4 1/2" F23 TRICONE DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS
USED 4 1/2" F23 TRICONE DRILLING BIT TURNS FREE NOT SLOPPY 2 3/8" PIN THIS BIT IS LIKE NEW
|
|
|
4 1/2" 211 L2 TRICONE DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS
USED 4 1/2" 211 L2 TRICONE DRILLING BIT TURNS FREE NOT SLOPPY 2 3/8" PIN THIS BIT IS LIKE NEW
|
|
|
4 5/8" DRILL BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
USED 4 5/8" DRILL BIT 2 3/8" CONNECTION LOOK AT PICTURES THANKS
|
|
|
3 5/8" L2 TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
USED 3 5/8" TRICONE DRILLING BIT 2 3/8" PIN
|
|
|
6 1/4" TRICONE DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS
USED 6 1/4" TRICONE DRILLING BIT TURNS FREE NOT SLOPPY 2 3/8" PIN LIKE NEW
|
|
|
4 1/2" CHEVRON DRILL BIT OIL GAS WATER WELL EQUIPMENT TOOLS
USED 4 1/2" D CHEVRON DRILLING BIT 2 3/8" PIN
|
|
|
4 3/4" STEP BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 3/4" STEP DRAG BIT THE BLADES ARE CHIPPED OR BROKE LOOK AT PICTURES THANKS
|
|
|
3 7/8" OFM TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
USED 3 7/8" TRICONE DRILLING BIT 2 3/8" PIN CONES TURN GOOD MISSING SOME INSIDE TEETH LOOK AT THE PICTURES THANKS 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-1480c8ff2f7-0x10a-
|
|
|
3 3/8" N-ROD TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
3 1/4" N-ROD TRICONE BIT TURNS FREE NOT SLOPPY
|
|
|
6 1/8" ST BUTTON BIT TRICONE DRILLING OIL GAS WATER WELL EQUIPMENT TOOLS
USED 6 1/8" ST TRICONE BUTTON BIT TURNS FREE SEALS ARE GOOD MISSING ONE CARBIDE INSERT
|
|
|
4 5/8" L2 TRICONE DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS
USED 4 5/8" L2 TRICONE DRILLING BIT TURNS FREE NOT SLOPPY 2 3/8" PIN
|
|
|
3 7/8" SEALED BEARING BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
USED 3 7/8" SEALED BEARING BIT SEALS ARE GOOD AND TURN GOOD THE TEETH HAS SOME WEAR LOOKING AT THE PICTURES WILL HELP THANKS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-148c17d060a-0x113-
|
|
|
4 3/4" TRICONE DRILL BIT OIL GAS WATER WELL EQUIPMENT TOOLS OILFIELD DECORATION
4 3/4 046 379 502 DRE AE377. The drill bit is in good condition. But has been sitting outside and rusted. so it needs to be freed up. All teeth are intact with no chips or signs of use.Measures approx. 7 3/4" tall x 4 3/4"wide. Item will ship with in 1 business day(excluding Saturday. Sunday, and Holidays) Item must be paid within 3 days, if unpaid a case will be started. Returns are accepted only if the item is damage or not as described. Please contact me first before starting a case, to see if we can work it out. Please review the pictures and ask any questions before bidding or end of auction. Oklahoma residents there will be 8.35% sales tax applied to the invoice. International buyers you will be responsible for any and all fees that may be due through customs. We will only ship to the PayPal address that the payment was made ... morewith. No exceptions. International buyers we will not mark as a gift or change the amount the item sold for. Simple Treasures L.L.C. 404 N. Grand Ave. Enid. OK. 73701 580-747-4158 On Jun-29-14 at 08:49:55 PDT. Seller added the following information: This bit has some missing teeth.
|
|
|
DRILL BIT, DRILL HEAD, OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS 6 inch ?
TWO(2) DRILL BITs, DRILL HEADs, OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS 6 inch? Please look over my pics, what you see is what you are bidding on(both for one price) YES, You are getting both bits for one bid. Please send me any questions you may have, I am not an expert on this stuff, but I will do my best to get you an answer. I will send them both in a large flat rate box for $20.00. Thanks for looking and God Bless. NOTE: I do not guarantee these to be working or the size. You are buying these"AS-IS"
|
|
|
3 7/8" SEALED BEARING TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
USED 3 7/8" SEALED BEARING TRICONE DRILLING BIT 2 3/8" PIN SEALS GOOD ON 2 CONES OUT ON 1 BUT TURNS GOOD LOOK AT THE PICTURES THANKS
|
|