|
3-7/8" L1 TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
3-7/8" L1 TRICONE BIT TURNS FREE NOT SLOPPY On Dec-22-12 at 16:18:28 PST. Seller added the following information: Posted with
|
|
|
4-3/4" L2 TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
4-3/4" L2 TRICONE BIT TURNS FREE NOT SLOPPY On Dec-22-12 at 16:18:28 PST. Seller added the following information:
|
|
|
8-3/4" TRICONE BUTTON BIT OIL GAS WATER DRILLING RIIG EQUIPMENT TOOLS
8-3/4" TUNGSTEN CARBIDE TRICONE BUTTON BIT CONES TURNS GOOD SEALS ARE GOOD AND TIGHT.
|
|
|
Drill Bits Water Well and Oil Gas. 8 inches 6 inches 4inches 14 included
14 drilling bits#5- 8inch#4 6-inch 5#4-inch Posted with
|
|
|
4-5/8" SEALED BEARING TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT
4-5/8" SEALED BEARING TRICONE BIT On Dec-22-12 at 16:18:28 PST. Seller added the following information: Posted with
|
|
|
Oil Gas Water Well Tricone TCI Drilling Drill Rig Rock Sand Bit Large 12" 65#
Listing is for an oil& gas drill bit. I got this bit as part of an auction lot and honestly don't know much about it. The previous owner was an executive at an oil& gas company in Texas. This is a large and VERY HEAVY bit. It measures approximately 12" long x 7-1/8" at the widest part and weighs 65 pounds. Unfortunately I don't know enough about these to say it's exact condition. Obviously it's been used and I can see several of the teeth are broken and/or missing. I tried turning each of the cones by hand and one spins pretty easily. One takes a bit more force to spin and one doesn't spin at all by hand. All pictures shown are of the ACTUAL bit you will receive. I prefer to have this sold as a local pickup but will ship although the shipping cost may be high due to the weight of this drill bit. If picking ... moreup locally it can be picked up in the Denton or Irving area. Please contact me with any questions and thanks for looking!
|
|
|
Very Rare Old Original Howard Hughes Oil Gas Water Tricone Drill Bit 4 1/2"
NO RESERVE AUCTION* A very rare and early original tri-cone oil/gas/water drill bit made and invented by the Howard Hughes owned company. The bit measures approximately 4 1/2" wide by about 7 1/2" tall. A nice rare old drill bit! Check out the pictures before bidding. Shipping is $12.50 by U.S. Priority Mail. International Buyers contact me for shipping costs before bidding. I will combine shipping on items whenever possible to send to you at the cheapest rate possible. Payment is by PayPal. But a seller can accept check and m.o. payment from a buyer if(and only if) the buyer requests it. NO RESERVE AUCTION*
|
|
|
4-3/4" ETD4RC SEALED BEARING BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS RIG
4-3/4" ETD4RC SEALED BEARING TRICONE BIT SEALS ARE GOOD.
|
|
|
Diamond? Carbide? Hammer Drill Drilling Bit Rock Water Well Oil Gas Equipment
Selling With No Reserve! Hi! I have for Auction here a Carbide? Hammer Drilling Bit that measures approx. 4-1/2" across the bottom. The widest/thickest part of the threads is about 2-3/4" See Pictures. I'm selling it as is. Get yourself a great deal here. Local pick-up is always welcome! For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the ... morebuyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" with no warranty or guarantee. All sales carry a 14 day return policy that covers a refund of the purchase price minus a 15% restocking fee. You will be responsible for the shipping back to us for a refund. Item must be in its original box and packing and all contents just like you received the item or we will not refund the item. There are a few reasons we will except returns without paying a 15% restock
|
|
|
WELL DRILLING OIL,WATER,GAS,TRICONE DRILL BIT 3 7/8""
3 7/8" TRI CONE ROLLER BIT THE BIT SHOWN IS BEING OFFERED AS-IS $ NO RESERVE AUCTION $ THE BIT IS USED AS SHOWN IN PICTURES. THE WHEELS ON THE BIT DO NOT TURN. PLEASE FEEL FREE TO ASK ANY QUESTIONS. THE BIT WILL SHIP VIA USPS PRIORITY MED BOX* THANKS FOR LOOKING!
|
|
|
4-7/8" L2 TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
4-7/8" L2 TRICONE BIT TURNS FREE NOT SLOPPY 1 ROLL ON THE OUT SIDE IS CHIPPED IT IS IN THE PICTURES THANKS On Dec-22-12 at 16:18:28 PST. Seller added the following information: Posted with
|
|
|
Hughes 4 3/4" Tricone w/2 3/8"API,HDD/Vermeer/DitchWitch/Oil/Water/Gas Drill Bit
This a used bit. It has absolutely No warn teeth. All the cones turn freely, the bearings are great. Truly is a great buy. HDD Drillers, or anyone that would like we can install extra Carbide button insert Shoulder protection for a small fee. Please ask for different shipping rates outside the 48 US States. Flat shipping rate advertised does not apply to other locations. Posted with
|
|
|
7 7/8 " OIL GAS WATER WELL DRILL DRILLING BIT TRICONE BITS BUTTON TCI TOOTH
YOU ARE BIDDING ON A RERUN 7 7/8" R30P REED BUTTON BIT. IADC CODE: 537 4 1/2 API REGULAR CONNECTION WE HAVE OVER 10.000 TRICONES IN STOCK AND READY TO SHIP. ALL SIZES AND TYPES AVAILABLE. WE ARE A WORLD WIDE SALES AND SERVICE DEALER AND A FULL SERVICE MACHINE AND WELDING SHOP. WE CUSTOM BUILD ANY SIZE HOLE OPENERS, REEMERS, STABILIZERS, SUBS, DRILL COLLARS, AND SUB ADAPTERS. EVERYTHING IS BUILT IN OUR SHOP FROM START TO FINISH. NO WORK IS HIRED OUT, WHICH GREATLY CUTS DOWN ON TIME AND COST TO THE BUYER. VARIOUS SHIPPING METHODS AVAILABLE, INCLUDING OVERNIGHT AND DELIVERY. SAME DAY SHIPPING IN MOST CASES; WE ALSO EXCEPT VISA AND MASTERCARDS; FEEL FREE TO CONTACT US, BY EMAIL OR BY CALLING(618)435-5000(ASK FOR RICK) OR(618)927-5586, WITH ANY QUESTIONS YOU MAY HAVE. WE ARE ALWAYS GLAD TO HELP! OR YOU CAN CHECK OUT OUR WEBSITE FOR MORE PICTURES ... moreAND INFORMATION. THANK YOU. RLCBIT. If you are outside of the United States and would like to purchase an item from us please contact me. We have removed international selling due to an overwhelming number of non-paying customers outside of the US. Sorry for any inconvenience.
|
|
|
8 3/4 " OIL GAS WATER WELL DRILL DRILLING BIT TRICONE BITS BUTTON TCI TOOTH
YOU ARE BIDDING ON A RERUN 8 3/4" REED TD51 BUTTON BIT. IADC CODE: 517 4 1/2 API REGULAR CONNECTION WE HAVE OVER 10.000 TRICONES IN STOCK AND READY TO SHIP ALL SIZES AND TYPES AVAILABLE. WE ARE A WORLD WIDE SALES AND SERVICE DEALER AND A FULL SERVICE MACHINE AND WELDING SHOP. WE CUSTOM BUILD ANY SIZE HOLE OPENERS, REEMERS, STABILIZERS, SUBS, DRILL COLLARS, AND SUB ADAPTERS. EVERYTHING IS BUILT IN OUR SHOP FROM START TO FINISH. NO WORK IS HIRED OUT, WHICH GREATLY CUTS DOWN ON TIME AND COST TO THE BUYER. VARIOUS SHIPPING METHODS AVAILABLE, INCLUDING OVERNIGHT AND DELIVERY. SAME DAY SHIPPING IN MOST CASES; WE ALSO EXCEPT VISA AND MASTERCARDS; FEEL FREE TO CONTACT US, BY EMAIL OR BY CALLING(618)435-5000(ASK FOR RICK) OR(618)927-5586, WITH ANY QUESTIONS YOU MAY HAVE. WE ARE ALWAYS GLAD TO HELP! OR YOU CAN CHECK OUT OUR WEBSITE FOR MORE PICTURES ... moreAND INFORMATION. THANK YOU. RLCBIT. If you are outside of the United States and would like to purchase an item from us please contact me. We have removed international selling due to an overwhelming number of non-paying customers outside of the US. Sorry for any inconvenience.
|
|
|
Drill Pipe 2 7/8 Amer Open Hole Double White Band oil gas equipment WILL TRADE
WILL TRADE FOR 3 1/2 I F Drill Pipe 2 7/8 American Open Hole Double White Band Average Length 31 feet and 56 joints( 1736 feet approximately) 7.00 per foot. Contact me please with ANY questions or suggestions. I should respond quickly. This is really great pipe as you can see and is in good shape but we purchased another rig and now need 3 1/2. $1000.00 deposit required via paypal if you make an offer and we agree upon total. Depending upon your location we can arrange payment to my bank when or before you pick up in Abilene. Texas- If you're in the drilling business or are going to re-sale this for more money you know how this procedure works. Thanks for viewing and good luck. Tina Marie Lawrence Energy*
|
|
|
4 3/4 Open Bearing Tri Cone Oil, Gas, Water Drilling Bit
Used 4 3/4 open bearing Tri cone oil gas water drilling bit. 2 7/8 pin end Posted with
|
|
|
(mh 25) BB2 UUV Oil Gas Well Drill Bit Cone Head ? 6" Diameter
This unit is in good condition with just some light signs of use. The unit is 6" in diameter. And 3.5" Tall. I cannot find a manufacturer name on the bit head, but it has the following information on it: 81094, BB2, UUV, Model 8 3/4-9" Overall a great used unit. Thanks for looking! If you have any questions. Just send me an email(please note we are not able to answer questions on Saturdays, but they will be answered on Sunday) Thanks again and take care! NOTE ON SHIPPING: Shipping is quoted for the contiguous 48 states. All others and international bidders pay actual. Just email me for a quote. Buy it Now items will be shipped within 3 business days of completed payment. NOTE FOR INTERNATIONAL CUSTOMERS: All customs fees. Duties, import taxes, and related charges are solely your responsibility to pay. We have no ability to ... moreestimate those cost so please contact your local post office prior to bidding to understand your financial responsibilities upon arrival. The number code in parenthesis at the beginning of the title is an internal company inventory code. It is in no way affiliated with the actual title. Please do not hesitate to contact us with any questions or comments. Prompt. Friendly, and accurate service is our focus.
|
|
|
2 3/8" X 2 3/8" CONNECTION OIL GAS WATER WELL DRILLING RIG EQUIPMENT TOOLS
2 3/8" X 2 3/8" CONNECTION
|
|
|
2 3/8" X 3" SUB OIL GAS WELL DRILLING EQUIPMENT TOOLS REG
NEW NEVER USED 2 3/8" X 3" SUB 2-3/8" PIN
|
|
|
4 1/2" TRICONE ROCK BIT 2 3/8" PIN OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
4 1/2" TRICONE BIT CONES TURN FREE On Dec-22-12 at 16:18:28 PST. Seller added the following information: Posted with
|
|
|
Equipment Brochure - Spang - Weld Drill Pipe Tool Joints Oil Gas - 1953 (EB425)
Oil Well Drilling Equipment Brochure- Spang-Chalfant- National Supply Company- Spangweld Drill Pipe and Tool Joints- Spang Double-Seal Shrink Thread Drill Pipe and Tool Joints- 24 Pages- Code: Bulletin No. 385. 1-53-10, Copyright 1953- interpret as 1953 from the code) approx. 11 x 8.5 inch sized pages- 4 Colour with Black& White photos- Maintenance Shop Fresh" slightly musty with areas of smudging& contact marks on the exterior- rust on staples and on paper in immediate vicinity- all text is quite readable and colours are quite vivid. Payment to be via Paypal ONLY. No other payment terms will be accepted and please do not ask for exceptions. We will combine multiple wins and help reduce shipping charges for combination shipments where possible. Not responsible for shipments lost in mail. Items are sent via regular air mail unless ... morebidder has requested and paid for higher class shipping and/ or tracking means. Please look through our Store Listings as well as the weekly auctions. Thanks for looking and for bidding! Powered by
|
|
|
Equipment Brochure - Reed - Drill Collars - Oil Gas Drilling - 1950 (EB421)
Oil Well Drilling Equipment Brochure- Reed Roller Bit Company. Houston, Texas- Reed Drill Collars- 12 Pages- Code: Bulletin DC-NO. 450, G7500- 7-50- interpret as 1950 from the code) approx. 11 x 8.5 inch sized pages- 3 Colour with Black& White photos- Maintenance Shop Fresh" slightly musty- rust on staples and on paper in immediate vicinity- all text is quite readable and colours are quite vivid. Covers with text and excellent descriptive photos: HiFlex treatment for Drill Collars. Integral Connection Drill Collars. Super Connection Drill Collars. Care and Maintenance of Drill Collars. Payment to be via Paypal ONLY. No other payment terms will be accepted and please do not ask for exceptions. We will combine multiple wins and help reduce shipping charges for combination shipments where possible. Not responsible for shipments lost ... morein mail. Items are sent via regular air mail unless bidder has requested and paid for higher class shipping and/ or tracking means. Please look through our Store Listings as well as the weekly auctions. Thanks for looking and for bidding! Powered by
|
|
|
Good Unused? Tri-Cone Rotary Well Drillers Gas Oil Water Well Drill Bit 4-5/8"
Good Unused? Tri-Cone Rotary Well Drillers Gas Oil Water Well Drill Bit 4-5/8" Selling With No Reserve! Hi! I have for Auction here a very good Tri-Cone Well Drilling Bit. All the cones are tight but do spin-in other words. They don't flop around. It has a lot of scuffs and bangs. The threads are good. I do not know if it has been used or not, but it looks to be in very good usable condition. Help yourself to a great deal! Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for ... moredetails or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarante
|
|
|
4 3/4" OIL GAS WATER Well Tricone HDD Vermeer Ditch Witch Drilling
This is a 4 3/4" Premium mill tooth bit like new condition. With 2 3/8 API Thread. Very low hours. In excellent shape. Rotary Pilot Bit for HDD, Vermeer, Ditch Witch, or down hole Oil/Water/Gas drilling. We carry many other sizes and types of bits as well. Sub adapters. Hole Openers, Stabilizers, Fly Cutters and Much more! If you have any questions give us a call. We will be happy to assist you any way we can! 618) 439-7253 Shipments outside the USA. Please ask for freight cost adjustment. Flat shipping costs do not apply outside continental 48 US States. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e7eaf05b0-0x103-
|
|
|
3-7/8" TRI-CONE ROTARY ROCK DRILL BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
This is a 3-7/8" TRI-CONE rock drill bit for drilling wells(water. Oil, etc? in overall good uncleaned original USED condition, from an estate auction in Springfield, MO. All three cones are tight and secure, and all three cone cutters spin smoothly and freely(NO wobbling or wiggling) The mounting threads also appear to be in good used shape. There are scuffs, scrapes, soil, and some normal expected wear to the cutting'teeth' from use, all as pictured, but it appears to be in overall very good usable condition. I don't really know anything about these kinds of things, so we'll let the pictures do the talking. PLEASE ZOOM IN& CLOSELY EXAMINE ALL 12 PHOTOS TAKEN FROM VARIOUS ANGLES FOR BEST VISUAL DESCRIPTION OF ACTUAL ITEM& CONDITION(soda can is for size comparison only) MEASUREMENTS: Approx 6" high; 3-7/8" ... morewidest(across the 3 cones) about 2" bottom diameter(or 1-1/4" inside bottom opening that would fit on drill. I don't know the correct terminology) Each of the 3 cutter cones is approx 2-1/2" diameter. Weight(without packing) is 7-1/2 pounds. The numbers stamped on the bottom are worn. But it looks like"HK 30707. and also"512" but can't be sure, as the stamping is quite worn) Again, please examine all photos for best visual description of actual item you will receive. Any color variation, distortion, shadows, blurs or other spots not mentioned are from camera flash glare/reflection. Please see our other items on ebay- we love to COMBINE SHIPPING when possible(with compatible items) International Buyers- Please Note(per eBay rules/regs) Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipp
|
|
|
5 1/8 pdc drill bit, water, gas, oil well drill bit
5 1/8 pdc Posted with
|
|
|
rerun 4 3/4 varel l2 oil well, water, gas drill Bit
Very nice bit. Spins freely with no bearing wear.
|
|
|
9 7/8" OIL GAS WATER Well Tricone Drill Bit HDD Vermeer Ditch Witch Drilling
9 7/8" Mill Tooth Bit. Used. Retipped, has some wear on the shanks. Cones are very tight, seals are still very nice. HDD, Vermeer, Ditch Witch, or down hole Oil/Water/Gas drilling. We carry many other sizes and types of bits as well. Sub adapters. Hole Openers/Rock Reamers, Stabilizers, Fly Cutters and Much more! If you have any questions give us a call. We will be happy to assist you any way we can! 618) 439-7253 Shipments outside the USA. Please ask for freight cost adjustment. Flat shipping costs do not apply outside continental 48 US States. Posted with
|
|
|
4 3/4" OIL GAS WATER Well Tricone Drill Bit HDD Vermeer Ditch Witch Drilling
This is a 4 3/4" Mill Tooth Bit like new condition. With 2 3/8 API Thread. Very low hours. In excellent shape. Rotary Pilot Bit for HDD, Vermeer, Ditch Witch, or down hole Oil/Water/Gas drilling. We carry many other sizes and types of bits as well. Sub adapters. Hole Openers, Stabilizers, Fly Cutters and Much more! If you have any questions give us a call. We will be happy to assist you any way we can! 618) 439-7253 Shipments outside the USA. Please ask for freight cost adjustment. Flat shipping costs do not apply outside continental 48 US States. Posted with
|
|
|
Working Model of Oil/Gas Rig/Brass on Hardwood Base/Mechanical/Unique
Fine example of creative craftsmanship. This unique working model actually shows the pump in action. Takes one AA battery. Heavy solid wood base measures approximately 9 inches x 5 inches and 2 1/2 inches high while the rig is approximately 7 inches long x 2 1/12 wide and 5 1/2 inches tall. Total height with base to top of rig is 8 inches tall. Weight, without packing is: little over 2 1/2 pounds. This is not a cheep toy but something special for someone in the oil and gas field.
|
|
|
5 1/4" OIL GAS WATER Well Drill Bit Tricone HDD Vermeer Ditch Witch Drilling
This is a Used Open Bearing 5 1/4" Tooth Bit. Very little wear at all. We carry many other sizes and types of bits as well. Sub adapters. Hole Openers, Stabilizers, Fly Cutters and Much more! If you have any questions give us a call. We will be happy to assist you any way we can! 618)439-7253 Continental 48 States only at advertised flat shipping rate. All other shipping locations. Cost will be adjusted by location. Any shipping questions outside US 48 States please message me. Posted with
|
|
|
6 1/8" OFM TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
6 1/8" OFM TRICONE ROCK BIT PIN 3 1/2" API BUY 2 OR MORE. FREE SHIPPING On Dec-22-12 at 16:18:28 PST. Seller added the following information:
|
|
|
3 3/4" TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT REG TOOLS
3 3/4" TRICONE ROCK BIT TURNS FREE NOT SLOPPY BUY 2 OR MORE ITEMS. FREE SHIPPING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13ec7bd87f0-0xfc-
|
|
|
4 3/4 Oil Gas Water well drill drilling Tricone Bit steel Tooth WOW!!!
Here is a 4 3/4 steel tooth medium formation drill bit. Not much footage on this bit at all. The cones roll very nice with very little to no side play. Please ask questions before purchasing. Thanks and good luck. It's a sweet deal!
|
|
|
Horizontal Oil Gas Separator
You are bidding on one 2" 3000 psi oil- gas separator. Manufactured by Tyson Smith Co. WP 3000 psi. Coil size 2" ex. hvy. Coil Test Psi. 4500, BTU/Hr 250, Nom. Shell Dia. 3' 0" Nom. Shell Length 7' 0" This unit just came off a producing well that was plugged.
|
|
|
4 5/8" ETD4RC SEALED BEARING BIT OIL GAS WATER WELL DRILLING EQUIPMENT REG TOOLS
4 5/8" ETD4RC SEALED BEARING BIT NICE
|
|
|
4 3/4" JZ SEALED BEARING BIT OIL GAS WATER WELL DRILLING EQUIPMENT REG TOOLS
4 3/4" JZ SEALED BEARING BIT NICE LIKE NEW USED VERY LITTLE.
|
|
|
4 3/4" MILL DRILLING BIT OIL GAS WATER DRILL REG EQUIPMENT TOOLS TRICONE
4 3/4" MILL 2 3/8" REG CONNECTION LIKE NEW
|
|
|
6 1/8" L2 TRICONE DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS REG
6 1/8" L2 TRICONE DRILLING BIT TURNS FREE NOT SLOPPY THE BIT IS USED AND HAS SOME WEAR? ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ee878ff56-0x103-
|
|
|
4 3/4 " OIL GAS WATER WELL DRILL DRILLING BIT TRICONE L19147 F6 1330 93001000
Confirmed Paypal Address only please. As pictured 4 3/4" OIL GAS WATER WELL DRILL DRILLING BIT TRICONE L19147 F6 1330 93001000 Great working shape‘ My Motto: Most items will ship within one business day I always aim to have the lowest price. If you find a lower price item of the same type and quality, please let me know and I will work with you on price Please ask any questions Guaranteed to work as stated. Or your money back I do my best to listing items as accurately as I can. If you have any problem with the item you purchased please contact me and I will resolve the issues Returned items will have a 20% restocking fee Please Examine Photographs Closely As They Are An Important Part Of The Listing And Are A Part Of The Description Of The Listed Item Please do not assume that anything else comes besides what is pictured. Thank you· ... moreNEW: Never used. Comes with everything new, Package might be open just to check content· New other: new. Never used, but might be missing box, or have some marks on it
|
|
|
4 3/4" SEALED BEARING TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 3/4" JZ SEALED BEARING TRICONE BIT NICE.
|
|
|
100lb Tricone Drill Bit 8 3/4" Oil Water Gas Drilling Equipment
Up for consideration is a used tricone drill bit. 8 3/4" in diameter and 15" long. Cones are free turning. Obtained at an estate sale. Very cool piece and would make a great display item for any collector ~ BIN or Make an Offer ~ thanks Buy with Confidence{ see feedback} Shipping will be a flat rate for everyone within the lower 48 states via FedEx 2-5 days. Insurance for the amount purchased and delivery confirmation included. Carefully Packaged and shipped within 48 hours of payment cleared. I accept Paypal only. Payment due within 48 hours of auction ending ~ thanks I take great pride in selling only good quality items. If there is a problem upon delivery please contact me asap. I will do my best to make sure you are completely happy with your purchase. Thanks for looking and please ask any questions!
|
|
|
8 3/4" VINTAGE TRICONE DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS REG
8 3/4" VINTAGE OR ANTIQUE TRICONE DRILLING BIT CONES DO NOT TURN. THANKS
|
|
|
4-5/8" L2 TRICONE ROCK BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOL
4-5/8" L2 TRICONE BIT TURNS FREE NOT SLOPPY On Dec-22-12 at 16:18:28 PST. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13f2f359988-0xf6-
|
|
|
3 3/4" FB1 DRILLING BIT 2 3/8" PIN OIL GAS WATER WELL DRILLING EQUIPMINT TOOLS
3 3/4" FB1 DRILLING BIT 2-3/8 PIN ORGINAL CARBIDE INSERTS Posted with
|
|
|
WELL DRILLING OIL,WATER,GAS,TRICONE DRILL BIT 2 15/16"
2 15/16" TRI CONE ROLLER BIT THE BIT SHOWN IS BEING OFFERED AS-IS $ NO RESERVE AUCTION $ THE BIT IS USED AS SHOWN IN PICTURES. THE WHEELS TURN FREELY. PLEASE FEEL FREE TO ASK ANY QUESTIONS. THE BIT WILL SHIP VIA USPS PRIORITY MED BOX* THANKS FOR LOOKING!
|
|
|
VINTAGE 7 7/8" FR754 TRI-CONE DRILLING BIT-OIL GAS WATER WELL -DTJ 548C
Very old 7 7/8" tri-cone oilwell. Water or gas well drilling bit. Mfg on lower end of threaded throat reads" 7 7/8" DTJ FR754 548C" 12" long, 8" cone tip diameter and weighs over 55 lbs. Very rusty and well used. Only one cone rotates as seen in picture with hand. The cone tips are broken or worn off. Offering as LOCAL PICKUP.It can be crated and shipped-be very expensive about $80.00 for a shipping fee.Please look at all pictures closely. Sold as is. Thank you.
|
|
|
4-5/8" FB1 DRILLING BIT 2-7/8" PIN OIL GAS WATER WELL EQUIPMENT TOOLS REG
4-5/8" FB1 DRILLING BIT 2-7/8 PIN ORGINAL CARBIDE INSERTS Posted with
|
|
|
4 5/8" ETD4RC DRILL BIT 2 7/8" PIN OIL GAS WELL EQUIPMENT REG TOOLS
4 5/8" ETD4RC SEALED BEARING BIT 2 7/8" PIN NICE a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13f56e61e5c-0xd4-
|
|
|
1958 OIL,GAS & MINERAL LEASE & LETTER~H.T. PANNELL OIL OPERATOR~For BRONAUGH,MO.
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge*FREE SHIPPING! Interesting ORIGINAL OIL.GAS AND MINERAL LEASE dated November 17, 1958 between a couple in Bronaugh, Missouri and lessee H.T. PANNELL, an OIL OPERATOR AND PRODUCER based in Stephens, Arkansas. LEASE is folded and has a handwritten note on the back signed by the agent for H.T. PANNELL. There's also a LETTER on official letterhead of H.T. PANNELL dated Mar. 9. 1959 stating, Dear Sir, Received your letter and enjoyed hearing from you. We expect to be up there to start drilling in the near future. If the weather remains good, the field should be dry enough soon. Very truly yours, and signed H.T. PANNELL. BUSINESS SIZED ENVELOPE torn open across the top with cancelled 4 cent stamp and postmarked ... moreMark 9 1959 in Stephens. Ark. with return address from H.T. PANNELL addressed to a gentleman in Bronaugh MO. CONDITION: Interesting oil/petroleum related historal paperwork I'd think for someone who collects this type of thing. Papers are in overall decent condition showing age-related discoloration. Some chipping and torn top of envelope as visible in photos, please ENLARGE& VIEW ALL PHOTOS and EMIAL QUESTIONS prior to bidding, thanks. Shipping to US ADDRESSES Only PAYPAL ONLY please w/FREE SHIPPING! California residents add 8% sales tax THANKS for looking and HAVE FUN if you bid! Please read TERMS& CONDITIONS: By bidding on this auction you agree to the following terms. Buyer must prepay and pay shipping charges. If extra coverage is desired let me know& I'll send a new invoice. I pack VERY well but cannot be responsible for package once it leaves my hands. Buyer needs to have winning bid paid for within 5 days of close of auction. Acceptable method of payment: PAYPAL. DISCLOSURE: You are bidding on vintage. Used merchandise unless stated otherwise in description, so do expect some age-appropriate wear. I describe the items to the best of my ability. Yo
|
|
|
4 3/4 SEALED TRICON BEARING BIT OIL AND GAS
Used sealed tricon 4 3/4. Bearing are tight not sloppy. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f6ddda316-0xff-
|
|
|
halliburton cementing tables 1995 oil gas drilling
halliburton cementing tables 1995 in excellent condition. Pages clean no folds,excellent shape. this was from a legit oil field worker and from an estate sale.he was a collector.shipping is 3.00
|
|
|
SIMCO EARTHPROBE 200 WATER, OIL, GAS , POSTHOLE, SEPTIC TEST DRILL RIG
You are looking at at a SIMCO EARTHPROBE Model 200 drill rig mounted on a 1998 Ford F 150 4 WD pickup. This unit was used in construction for drilling test holes for septic systems. It has a variety of uses including water wells. Post holes, core samples for oil industry. It can drill vertically or at angles up to near horizontal for drilling into banks etc. The unit is fully self contained, operated by a KOHLER COMMAND 20 HP motor with oil pressure sentry switch and electric start. The motor powers a PARKER HYDRAULIC PUMP which operates all the functions. The pump, lines and fittings are all in excellent shape with no wear-through on any lines and no leaks. The unit comes with 5 60" long X 5" diameter augers plus various connectors etc. Many other options and accessories are available from SIMCO Co. The drill rig is mounted on ... morea 1998 FORD F 150 4 WD pickup. The truck has 82000 original miles and is in excellent running condition. It has the TRITON 4.6 liter V 8 motor with auto trans and 4 WD transfer box. The truck is fitted with Power windows. AC, PS, Power mirrors, Cruise control, Stereo and power brakes. The truck is also equipped with a 3000 watt power inverter for operating your 110 volt tools on site. The interior is in excellent shape and all the glass is perfect. The rear bumper and right quarter panel have some damage due to a stump, but nothing serious. The tailgate was removed to fit the drill rig and is now missing. The truck has a CLEAR TITLE. This is an excellent opportunity to start your own turnkey business. With the oil boom in North Dakota. There is a big demand for drilling core samples, water test holes, septic test holes etc. Also, as the housing business begins its recovery the demand for septic tests and other utility work as well as post holes for fencing will keep you busy. The drill rig alone sold for 32000.00 new- for technical questions. Parts availability etc. contact SIMCO CO. Osceola, Iowa and quote the serial# from this ad. Please note: I WILL SEPARATE the units if you p
|
|
|
TRICONE DRILL BIT 3-7/8'' OIL GAS WATER WELL DRILL BIT TIP ATTACHMENT
TRICONE DRILL BIT 3-7/8' We are offering you a TRICONE BIT. This unit is pre-owned and shows minor use, please ask all questions before buying, tested, it works, please understand that you are buying a used item. If you have any issues with it please contact us before placing feedback and we will help you until everything is resolved, we guarantee the unit to be as described and against doa or your money back. We also ship insured and it is included in the shipping charges. BIT AS SHOWN ON PICTURES. WE SELL SEVERAL ITEMS. ALL ITEMS ARE PRE-OWNED UNLESS OTHERWISED DESCRIBED, IF THERE IS ANY ISSUE WITH YOUR PURCHASE PLEASE CONTACT US VIA EBAY MESSAGE, PLEASE CONTACT US RIGHT AWAY WITH YOUR EBAY ITEM NUMBER AND ADDRESS YOUR PROBLEMS BEFORE LEAVING ANY NEGATIVE OR NEUTRAL FEEDBACK, WE WILL HELP YOU UNTIL ISSUE IS RESOLVED BUT WE NEED TRUST ... moreAND REASONABLY TIME TO FIX IT, IF ITEM NEEDS TO BE RETURNED WE WILL COVER RETURN AS LONG AS IT HAS NOT BEEN TAMPERED WITH SERIAL NUMBER, SPECIAL ID MARKS, TAMPER PROOF STICKERS, REFUND WILL NOT BE ISSUED IF ITEM HAS BEEN TAMPERED WITH. WE SHIP MONDAY TO FRIDAY ONLY. ALL PACKAGES SHIP INSURED! e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13fc60f54d6-0xff-
|
|
|
3 1/8 Open Bearing Tri Cone Oil, Gas, Water Drilling Bit
3 1/8 OFH open bearing Tri cone drilling bit. Posted with
|
|
|
12 1/4 TRICONE BUTTON BIT OIL GAS WATER WELL DRILLING TOOLS EQUIPMINT REG
12 1/4" TRICONE BUTTON BIT LITTLE WASH BUT NICE LOCAL PICKUP OR WILL DELIVER@ $1.65 PER MILE ONE WAY
|
|
|
4 3/4 L2K Oil Gas Water Drilling Bit
4 3/4 L2K open bearing Tri cone drilling bit. 2 7/8 pen end Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13fd77db073-0x105-
|
|
|
6-1/8" Roller Cone Tri-Bit Oil Field Drill Bit Oil Gas Water Well Drilling
Read all details before buying-Including Return Policy. Save us both a Headache 6-1/8" Roller Cone Tri-Bit Used bit-Practical uses-Oil. Gas and Water Well Drilling This is a used bit with 3 roller cones. But one the cones outter edges has a piece chipped out of it. Not sure if it can be used this way or if it will need repairs. All three cones do roll, not sure how free they should be, but they do roll. See pictures for piece that is chipped out before buying Do not know the thread taper. But will give you the sizes that we measure with a measuring tape. Threaded dept is App. 3.25" Diameter at smallest end is app. 2.60" Diameter at Widest Point 3.35" All sizes are app. We are not a machine shop and do our best to describe all items we sell Again One of the roller cones has a chipped out piece on the outter surface at bottom ... moreof housing roller surface Selling as is. All sales are final. NO RETURNS ACCEPTED
|
|
|
2 7/8" X 2 3/8" BOX SUB OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
2 7/8" X 2 3/8" BOX SUB THE MACHINE SHOP MADE REPAIRS ON THE SUB
|
|
|
6 1/8 L1 Open Bearing Tri Cone Oil Gas Water Drilling Bit.
6 1/8 L1 open bearing Tri cone oil gas water drilling bit. 3 1/2 REG pen end. Posted with Reasonable offers welcome
|
|
|
6 inch oil gas water well drill
For auction i have a used 6 inch well drill. I know nothing about this item so please judge from the pictures. One of the 3 heads at the bottom moves a little the other 2 don't move at all.
|
|
|
Tricone oil/gas/water well drilling bit 8 3/4. carbide button
good used tricone bit. I don't believe this bit was ever actually used but shows some wear on it. the only problem i can see is that it is missing 1 carbide tooth directly in the center of the wheel. bearings are good and none of the other carbide buttons shows any signs of use. i may deliver personally for a fee but i will not ship. your welcome to come and take a look at it. bit is for sale locally.
|
|
|
DTH 5in water well drilling bit gas/oil
dosent look as if the bit was ever used much but it does look like one of the carbide buttons was resharpened its the 1 my finger is pointed at.
|
|
|
Large Heavy Duty 8" Tri-Cone Rotary Oil Gas Water Well Drilling Rig Drill Bit
Large Heavy Duty 8" Tri-Cone Rotary Oil Gas Water Well Drilling Rig Drill Bit Selling With No Reserve! Hi! I have for Auction here a Tri-Cone Rotary Drill Bit. The cones are not stuck and spin nicely. They are not floppy. A few of the knobs are chipped. It has a piece welded on the top that could be cut off. This item will be shipped anywhere in the lower 48 States for $60.00 via FedEx. Help yourself to a great deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details ... moreor if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are
|
|
|
3 1/2" X 4 1/2" PIN TO BOX SUB OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
3 1/2" X 4 1/2" PIN TO BOX SUB
|
|
|
Drilling Bit for Water Well, Oil, Gas Drilling Equipment Tool Svedala Rock Tools
Up for bid is this drilling bit. It can be used to drill a water well or a gas or oil well. It is 9 inches tall. The measurement across at the top of the thread is 3.5 inches. At the top where the bits are it measures 4.25 inches across. It has a sticker on it that says Svedala Rock Tools. Thanks for looking and good luck bidding. I offer 100% money back guarantee if not satisfied with item. Item will ship within 3 days once payment is made. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14070442ac6-0x100-
|
|
|
4 3/4" 3 WAY CHEVRON BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS RIG
4 3/4" 3-WAY CHEVRON BIT. 2 7/8" REG PIN, A FUW CHIPS LOOK AT THE PICTURES THANKS.
|
|
|
4 3/4" ETD4 RC SEALED BEARING BIT OIL GAS WATER WELL DRILLING EQUIPMENT
4 3/4" ETD4 RC SEALED BEARING BIT:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14079d7798c-0xf3-
|
|
|
INDUSTRIAL 4 3/4" OIL, GAS, WATER, STEEL ROCK DRILL BIT #K 1514 T LIGHT WEAR
INDUSTRIAL 4 3/4" OIL. GAS, WATER, STEEL ROCK DRILL BIT#K 1514 T(NOT SURE OF MAKER UNLESS THE T STANDS FOR TRICON. BIT LOOKS NEW BUT I AM NOT AN EXPERT. DRILL TEETH LOOK NEW WITHOUT CHIPS OR MISSING CHUNKS, DRILL BODY SHOWS LITTLE TO NO WEAR. SCREW BOLT END TEETH ARE IN GREAT CONDITION AND NOT MARRED WITH THE EXCEPTION OF SOME RUSTY LOOKING SPOTS, SEE PICTURES FOR THIS.CENTER HOLSE IS 1 1/2" INSIDE DIAMETER AND 2 1/16" AT FIRST THREAD OUTSIDE DIAMETER. DILL IS STAMPED 4 3/4" AND HAS A SERIAL# K I514 WITH A T STAMPED ON BOTTOM. HAPPY BIDDING AND THANKS FOR YOUR INTEREST IN MY ITEM.BE SURE TO ADD ME TO YOUR FAVORITES LIST AND CHECK OUT MY EVER CHANGING LIST OF OTHER ITEMS.FEEL FREE TO ASK ME ANY QUESTIONS YOU MAY HAVE. I WILL TRY TO ANSWER THEM ASAP.PLEASE FEEL AT HOME IN MY EBAY STORE WHERE I HAVE AN EVER CHANGING ASSORTMENT ... moreOF ECLECTIC ITEMS. Check out my! Be sure to add me to your!
|
|
|
Antique SANDERS CYCLONE DRILL CO. CATALOG WELL DRILLS Water Gas Oil
I accept Pay Pal. Or contact me for other payment arrangements. NO RESERVE
|
|
|
4 3/4" Very Good Used Smith/Gruner open bearing Tricone Bit OIL GAS WATERWELL
This bit is like new. Cones turn smooth and there is no play in the bearings. I have lightly re-greased the bit and painted it up. Any other questions. Just ask. Size: 4 3/4" OD Pin: 2 7/8" API REG Type: D- Open Bearing Milled Tooth IADC Code: 111/121/131 Circulation: Center Manufacturer: Smith/Gruner Condition: Like New Thanks.
|
|
|
8 1/2 " OIL GAS WATER WELL DRILL DRILLING BIT TRICONE BITS BUTTON TCI TOOTH
YOU ARE BIDDING ON A RERUN 8 1/2 ATJ1 HUGHES TOOTH BIT. IADC CODE: 127 4 1/2 API REGULAR CONNECTION WE HAVE OVER 10.000 TRICONES IN STOCK AND READY TO SHIP. ALL SIZES AND TYPES AVAILABLE. WE ARE A WORLD WIDE SALES AND SERVICE DEALER AND A FULL SERVICE MACHINE AND WELDING SHOP. WE CUSTOM BUILD ANY SIZE HOLE OPENERS, REEMERS, STABILIZERS, SUBS, DRILL COLLARS, AND SUB ADAPTERS. EVERYTHING IS BUILT IN OUR SHOP FROM START TO FINISH. NO WORK IS HIRED OUT, WHICH GREATLY CUTS DOWN ON TIME AND COST TO THE BUYER. VARIOUS SHIPPING METHODS AVAILABLE, INCLUDING OVERNIGHT AND DELIVERY. SAME DAY SHIPPING IN MOST CASES; WE ALSO EXCEPT VISA AND MASTERCARDS; FEEL FREE TO CONTACT US, BY EMAIL OR BY CALLING(618)435-5000(ASK FOR RICK) OR(618)927-5586, WITH ANY QUESTIONS YOU MAY HAVE. WE ARE ALWAYS GLAD TO HELP! OR YOU CAN CHECK OUT OUR WEBSITE FOR MORE PICTURES ... moreAND INFORMATION. THANK YOU. RLCBIT. If you are outside of the United States and would like to purchase an item from us please contact me. We have removed international selling due to an overwhelming number of non-paying customers outside of the US. Sorry for any inconvenience. Posted with
|
|
|
6 1/8" OIL GAS WATER WELL DRILL DRILLING BIT TRICONE BITS BUTTON TCI TOOTH
YOU ARE BIDDING ON A RERUN 6 1/8" XR50DPS SMITH BUTTON BIT. IADC CODE: 627 3 1/2 API REGULAR CONNECTION WE HAVE OVER 10.000 TRICONES IN STOCK AND READY TO SHIP. ALL SIZES AND TYPES AVAILABLE. WE ARE A WORLD WIDE SALES AND SERVICE DEALER AND A FULL SERVICE MACHINE AND WELDING SHOP. WE CUSTOM BUILD ANY SIZE HOLE OPENERS, REEMERS, STABILIZERS, SUBS, DRILL COLLARS, AND SUB ADAPTERS. EVERYTHING IS BUILT IN OUR SHOP FROM START TO FINISH. NO WORK IS HIRED OUT, WHICH GREATLY CUTS DOWN ON TIME AND COST TO THE BUYER. VARIOUS SHIPPING METHODS AVAILABLE, INCLUDING OVERNIGHT AND DELIVERY. SAME DAY SHIPPING IN MOST CASES; WE ALSO EXCEPT VISA AND MASTERCARDS; FEEL FREE TO CONTACT US, BY EMAIL OR BY CALLING(618)435-5000(ASK FOR RICK) OR(618)927-5586, WITH ANY QUESTIONS YOU MAY HAVE. WE ARE ALWAYS GLAD TO HELP! OR YOU CAN CHECK OUT OUR WEBSITE FOR MORE ... morePICTURES AND INFORMATION. THANK YOU. RLCBIT. If you are outside of the United States and would like to purchase an item from us please contact me. We have removed international selling due to an overwhelming number of non-paying customers outside of the US. Sorry for any inconvenience. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14119422004-0xfd-
|
|
|
Tricone Drill Bit Rock,Oil,Gas,Water, Very Heavy
This auction is for 1 Used Tricone Drill Bit Loos to be in good condition I do not see any Name or marking on this bit Can Be seen in Colorado Springs Weights a bout 15 pounds hole size 5 inch in diameter. The cone is 3 inch at the base and 2 inch at the top the cone is 3.5 inches long the one with the chain has a plug inside the cone that has what looks like a w on and in is about 2in inside the cone.both are the same size the one with the chain does weighs like 4oz more. high bidder to pay $19.99 S& H.Please feel free to E-mail me with any questions. Check out my! Be sure to add me to your! Thanks For Looking g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1412fea1a8f-0xf2-
|
|
|
USED 4 3/4 Tricone Drill bit N.06 Water Gas Oil Well
you are biding in a USED Tricone Drill bit of 4 3/4 in.
|
|
|
3 7/8" DT4RC SEALED BEARING BIT OIL GAS WATER WELL EQUIPMENT TOOLS
USED 3 7/8" DT4RC SEALED BEARING BIT SOME CHIPPED TEETH AND THE SEALS ARE GOOD
|
|
|
WLS 4-3/4" Tricone 2 7/8 REG Oil Gas Water Well Mining Mine Drilling Drill Bit
WLS 4-3/4" Tricone 2 7/8 REG Oil Gas Water Well Mining Mine Drilling Drill Bit You are bidding on a 4-3/4" Tricone Drill Bit by WLS Drilling. You only get what is pictured. Nothing else is included. Best of luck and happy bidding! NO RESERVE!
|
|
|
4 1/2" FB1CS DRILLING BIT OIL GAS WATER EQUIPMENT TOOLS
4 1/2" FB1CS DRILLING BIT 2 3/8" REG PIN
|
|
|
4 3/4" FBI DRILL BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 3/4" FBI DRILLING BIT
|
|
|
4 5/8" FBI DRILLING BIT OIL GAS WATER WELL EQUIPMENT TOOLS
4 5/8" FBI DRILLIN
|
|
|
6 1/8" TCI TRICONE BUTTON BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
6 1/8" HUGHES STX-MCDX TRICONE BUTTON BIT. SEALS ARE GOOD AND TIGHT SHIP USA LOWER 48 STATES ONLY THANKS
|
|
|
8 3/4" SEALED BEARING TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
8 3/4" HUGHS GXD-28 TRICONE BIT SEALS ARE GOOD AND TIGHT. SHIP TO USA LOWER 48 STATES ONLY.
|
|
|
VINTAGE OIL & GAS WELL LOGGING GEARHART INDUSTRIES FORT WORTH TX DATA HANDBOOK
1970'S VINTAGE OIL& GAS GEARHART INDUSTRIES- WIRELINE DIVISION- FORT WORTH. TEXAS FORMATION EVALUATION DATA HANDBOOK 100 PAGES- NO WRITING. STAINS, OR TEARS- TIGHT BINDING- GREAT SHAPE(LOOKS BRAND NEW) SHIP USA ONLY- PAYPAL ONLY
|
|
|
5 Inch Gas Oil Well Drilling Tri Cone Tooth Bit
Cones and teeth are in excellent condition. Looks to have been used very little just enough to take off most of the paint. Payment is expected within 24 hours and required within 48 hours. Please see Pictures. Thanks for looking and while you are here why not take a look through my store. I have many unique and very hard to find items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Drh Johnson Hook Oilfield Tool Hit & Miss Tools Gas & Oil Tools
Here I have a nice drh johnson hook.This hook I don't know much about it.Please feel free to ask questions.Thank you for your time and bidding Posted with
|
|
|
Tricone Bit 2 Inches Across Well Drilling Tools 4 3/4 Gas & Oil Bits
Nice drill bit. Measure 2 inches across the top. Please check out our other drill bit and tools we are listing daily for 3 days only. Thanks.
|
|
|
4 3/4" XG BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 3/4" XG BIT 2 7/8" API REG CONNECTION(LIKE NEW)
|
|
|
4 1/2" L2 TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 1/2" L2 TRICONE BIT TURNS FREE NOT SLOPPY
|
|
|
4 1/2" SEALED BEARING TRICONE BIT OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
4 1/2" SEALED BEARING TRICONE BIT 2 3/8" REG CONNECTION On Oct-25-13 at 00:03:02 PDT. Seller added the following information:
|
|
|
CHANGE OVER SUB 2 3/8" X 3' OIL GAS WATER WELL DRILLING EQUIPMENT TOOLS
CHANGE OVER SUB 2 3/8" BOX END 3" REG PIN THREADS PER 1" 8 OD 3 1/2" OAL 17 1/2" Check out my! By adding my eBay Store to your Favorites.
|
|
|
Well Drilling ~ Oil ~ Water~ Gas~ Vintage Bi Cone Bit~ Tricone
4 3/4 Vintage Bi Cone Bit. Cones Turn Free
|
|
|
four 4 1/2 rerun tri cone oil well, gas well, and water well drill bits
These bits are reruns all cone are nice and tight with no broken teeth. You are buying all 4 Posted with
|
|
|
tricone drill bit 4 5/8" oil gas water well drill bit tip
This bit has been sitting in a garage for awhile- I am selling it as used but I see no wear on it. Only some dust and very minor surface rust. There are no chipped teeth and all bearing tight and turn nicely It is stamped 4 5/8 size on end. Please see all photo this is what you get.
|
|