Denture Press Nevin #832
Nevin Denture Press# 832. Pneumatic Press for packing and processing dentures. Works great. Purchased new in 2009 and has some minor cosmetic wear. Has always been used and cared for properly.
|
|
Vintage Hanau Flask Press ,Brass Denture Equipment Part
Vintage brass dental item. Selling as is as seen in photos. Four pieces to this item.
|
|
Hanau hydrolic denture press
This press does not come with the handle. But is still fully functional.
|
|
Nevin Laboratories #832 Pneumatic Dental Denture Flask Press
Description Nevin Laboratories Model#832 Pneumatic Flask Press Prevents stress on back. Arms& shoulders when packing resins Assures dense. Porosity-free resins Safe two-hand operation Factory pre-set at 1500 psi trial pack 3000 psi for final closure Air regulator with quick connect hose Sells new at over $3750 Free shipping in USA Clean used condition; some marks. Scratches, and typical signs of use Does not include: Parts. Accessories, or items not shown Terms Payment: PayPal is the easiest way to pay on eBay. Contact us if you wish to pay with another method or require more than three days to pay for your item. Shipping: Large or bulky items ship via common carrier freight. Most freight items ship within 4-6 days. All other items ship within 3 days after payment has cleared and are shipped using FedEx. UPS or USPS. International buyers: ... moreSome items may be available for international shipping. Additional fees. Customs brokering, and customs clearance are the responsibility of the buyer. Please contact us to arrange international shipment and purchases in advance. Return policy: Unless otherwise stated in the listing. All items are sold As-Is. Any item that is listed with and covered under a guarantee or warranty. May be subject to a 15% restocking fee, if a return is necessary. All return shipping charges are the buyer's responsibility. Contact us immediately if you have a damaged shipment. So that we may begin the claims process. Per eBay Rules: The sale of this item may be subject to strict regulation by the US Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to state or FDA regulation, you must provide verification that you are an authorized user.
|
|
A Set of Dental Denture Press by B.D.M. Co.
The Item is A Set of Dental Denture Press by B.D.M. Co. Disclaimer Ebay requires the following wording to list in this category and is included for reference: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. JMCKO
|
|
Dental Denture Press by Precision INC
The Item is Dental Denture Press by Precision INC. Disclaimer Ebay requires the following wording to list in this category and is included for reference: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. JMCKO f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f1a17c817-0xf2-
|
|
Nevin Lab Denture Flask Press model # 832
NEVIN Pneumatic Denture Flask Press model# 832 Barely used and excellent condition.Some scratches when moving,pls see on picture
|
|
Hanau Varsity Dental Denture Upper Brass & Kerr Equa-Lock Compress press
Used. But still in good shape.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f7bd36aab-0x104-
|
|
Hanau Varsity Dental Denture Flask Upper Brass & Kerr Equa-Lock Compress press
Used. But still in good shape
|
|
Vintage Handler Denture Press 22-c Complete Flask with Tools And old Box
Vintage Bronze Handler Denture Press 22-c Complete Flask with Tools And old Box as pictured. Looks like this Estate item is all there and sold as pictured
|
|
COE NEVIN PNEUMATIC DENTURE PRESS
COE-NEVIN PNEUMATIC DENTURE PRESS. LOT#1767 I PURCHASED THIS UNIT NEW AND HAVE ALWAYS MAINTAINED IT AS PER THE MANUFACTURERS SPECIFICATIONS. THIS UNIT IS IN NEAR MINT CONDITION WITH A FEW MINOR PAINT SCRATCHES. THIS IS A FULLY FUNCTIONAL VERY WELL MAINTAINED PRESS THAT WORKS AS DESIGNED. THIS UNIT HAS A TRIAL PACK AND A FINAL PACK STAGE AND WILL HELP SPEED UP AND STREAMLINE THE PRODUCTION PROCESS WITH VERY CONSISTANT RESULTS! I PERSONALLY LIKED THIS PRESS OVER THE HAND CRANK TYPE BECAUSE. I BELIEVE IT GIVES A MORE COMPLETE PACK IN A SHORTER AMOUNT OF TIME. I RECENTLY RETIRED AFTER A 37 YEAR CAREER OWNING MY OWN LAB AND WILL BE LIQUIDATING ALL OF MY EQUIPMENT. TOOLS, SUPPLIES AND TEETH OVER THE NEXT FEW WEEKS. IF YOU ARE LOOKING FOR A SPECIFIC PIECE OF EQUIPMENT OR ITEM PLEASE CONTACT ME AND I WILL LIST IT. THIS PRESS SELLS NEW FOR ABOUT $3800.00! ... moreTAKE ADVANTAGE OF A VERY LOW STARTING PRICE AND PLEASE PLACE YOUR BID NOW TO MAKE THIS YOUR OWN! GOOD LUCK! PLEASE CHECK OUT THE OTHER ITEMS LISTED IN MY STORE. FINAL ROUND MANTIQUES FOR MORE EXCEPTIONAL VALUES ON HARD TO FIND AND UNIQUE ITEMS. THANK YOU!
|
|
USED COMPLETE DENTURE PRESS WITH UPPER AND LOWER FLASKS, AND WRENCH
USED COMPLETE DENTURE PRESS WITH UPPER AND LOWER FLASKS. AND WRENCH. Click picture to enlarge click picture to enlarge This is a slightly used complete bronze denture press with wrench along with matching upper and lower flasks. Everything is in very fine condition. There is no manual or original shipping box available. What you see here is what you get. All sold"as is" If you have any questions please feel free to call us on our cell 713-256-8869. For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as ... morean authorized purchaser of this item before shipping the item. Lately(summer. 2012) we have buyers taking advantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge All payment must be received in the exact due
|
|
DENTAL LAB-COE-BUILD (2X) DOUBLE PNEUMATIC DENTURE PRESS-NR
UP FOR BIDDING A USED. IN PERFECT WORKING CONDITION. PNEUMATIC DOUBLE DENTURE PRESS, MADE BY COE-BUILD. NEVIN) THERE IS SOME SCRACHES DUE TO A NORMAL USE.TUBING WAS REPLACED.IT HAS NO WORKING ISSUES. SEPARETE CONTROLS FOR EACH PRESS. IT HAS BEEN REPAINTED. THIS PRESSES ARE FOR LIFE.WE ACCEPT PAY PAL OR CHECKS. ITEM WILL BE SHIP AFTER MONEY IS CLEAR.SHIPED TO A 48 CONTINENTAL UNITED STATES.QUESTIONS TO 856 842 6951.THANK YOU FOR LOOKING THIS ITEM AND GOOD LUCK! On May-25-13 at 06:59:01 PDT. Seller added the following information: THIS PRESSES WHERE MADE BY COE COMPANY. COE WAS PURCHASED BY NEVIN. THE COMPONENTS ARE THE SAME AS COE-BUILD SINGLE PRESS THAN THE NEVIN PRESS, EXEPT THE COVER AND THE OPERATING BUTTONS.
|
|
Flli Manfredi OL57 Hydraulic Dental Denture Press (Made In Italy) (No Reserve)
WORLD DENTAL INC(716) 957-3129"SELLING DENTAL EQUIPMENT BELOW WHOLESALE WORLDWIDE" LIKE NEW CONDITION! SAVE OVER 50% RETAIL PRICE MADE IN ITALY ShipSaver. Lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-140270fc4ec-0xfe-
|
|
Pressing denture press
Pressing Vintage Denture Press Works Dental lab liquidation
|
|
Hanau Acralain Homedica Dental Denture Varsity Flask Press Brass Articulator?
Hanau Homedica Acralain denture flasks.Presses,articulators?You get it all.One small round disc has a crack.Overall in very good condition.NO Reserve! THIS IS A 5 DAY AUCTION! Email for other payment options.
|
|
Hanau Engineering Dental Denture Varsity Flask Press Brass Bronze Upper Lower #1
Hanau denture flask press complete with flasks.Overall in very good condition.NO Reserve! THIS IS A 5 DAY AUCTION! Email for other payment options.
|
|
Justi denture press
This hydraulic denture press works great. I just don't do that much work anymore. It's easy to use and quick.
|
|
USED OUR NO. 3 COMPLETE BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASKS AND W/W
USED OUR NO. 3 COMPLETE BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASKS AND W/WRENCH. Click picture to enlarge This is a used complete denture press with matching upper and lower flasks. And with wrench. Sold"as is" What you see is what you get. Should you have any questions please feel free to call us on our cell 713-256-8869. Se Habla Espanol! For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item. Lately(summer. 2012) we have buyers taking ... moreadvantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge All payment must be received in the exact due amou
|
|
USED OUR NO. 2 COMPLETE BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASKS AND W/W
USED OUR NO. 2 COMPLETE BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASKS AND W/WRENCH. Click picture to enlarge This is a used complete denture press with matching upper and lower flasks. And with wrench. Sold"as is" What you see is what you get. Should you have any questions please feel free to call us on our cell 713-256-8869. Se Habla Espanol! For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item. Lately(summer. 2012) we have buyers taking ... moreadvantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge All payment must be received in the exact due amou
|
|
USED OUR NO. 1 COMPLETE BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASKS AND W/W
USED OUR NO. 1 COMPLETE BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASKS AND W/WRENCH. Click picture to enlarge This is a used complete denture press with matching upper and lower flasks. And with wrench. Sold"as is" What you see is what you get. Should you have any questions please feel free to call us on our cell 713-256-8869. Se Habla Espanol! For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item. Lately(summer. 2012) we have buyers taking ... moreadvantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge
|
|
R&R Duro Denture Curing Flask, Press
R&R Duro Denture Curing Flask. Press dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-142b142b636-0xf7-
|
|
Dentsply Neytech Surveyor Dental Lab Denture Press Measuring System
SKU: 30883. Dentsply Neytech Surveyor Dental Lab Denture Press Measuring System. Condition Mechanical: Tested- functional. Aesthetic: Very good used condition; some marks. Scratches, and typical signs of use. Does not include parts. Accessories, or items not shown. Features Features: Adjustable spindle. Includes only items shown: Surveyor press system. Warranty: 30 day return policy. Guaranteed. Specifications Serial: 188992 Information about this product: We ship with USPS. FedEx, and several freight carriers. Atlas Resell is the MARKET for used dental equipment. We buy. Sell, consign, and repair dental equipment. Our comprehensive services can help you clear space. Reclaim capital, replace equipment, and repair almost anything dental-related. We can even help you find a technician in your area. Payment: Atlas accepts most types of payments. ... moreIncluding PayPal, credit cards, and several other methods, within seven days of purchase. PayPal is the easiest way to pay on eBay- contact us if you wish to pay with another method or require more than seven days to pay for your item. Contact us immediately at 208-286-1775 if you have problems completing your payment. Financing: We offer financing! Approval times are currently less than 24 hours. Please contact our customer service and sales department at 208-286-1775 or before the completion of the sale to begin your application. Customer service: We strive for positive feedback in every eBay transaction. Please let us know if there is anything more we can do to ensure the best possible purchasing experience. Communication is paramount in all of our transactions. Feel free to eBay Message us with any questions or concerns. Atlas customer service is available Monday through Friday, 8:00 a.m. to 5:00 p.m. MST. If you have questions about your purchase or have any problems with your order, contact us immediately at 208-286-1775 or by email at to resolve the issue. Shipping: Most freight items ship within 4-6 days and ground items ship within 1 day after payment has cleare
|
|
USED OUR NO. 1B COMPLETE HANDLER BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASK
USED OUR NO. 1B COMPLETE HANDLER BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASKS AND W/WRENCH& WOODEN HANDLE. Click picture to enlarge This is a used complete Handler denture press with matching upper and lower flasks. And with wrench and handle. Sold"as is" What you see is what you get. Should you have any questions please feel free to call us on our cell 713-256-8869. Se Habla Espanol! For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the ... moreitem. Lately(summer. 2012) we have buyers taking advantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge All payment must be received in the exact due amount
|
|
USED OUR NO. 1A COMPLETE HANDLER BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASK
USED OUR NO. 1A COMPLETE HANDLER BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASKS AND W/WRENCH& PLASTIC HANDLE. Click picture to enlarge This is a used complete Handler denture press with matching upper and lower flasks. And with wrench and handle. Sold"as is" What you see is what you get. Should you have any questions please feel free to call us on our cell 713-256-8869. Se Habla Espanol! For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the ... moreitem. Lately(summer. 2012) we have buyers taking advantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge All payment must be received in the exact due amount
|
|
USED CHICAGO NO. 2 DENTURE PRESS
USED CHICAGO NO. 2 DENTURE PRESS. Click picture to enlarge click picture to enlarge This is a used complete Chicago No. 2 Denture Press. The size of the opening is for your single flask. Opening is maximum 3-1/4 inches high by 4-7/16 inches wide. Net weight is 8 pounds. Sold"as is" What you see is what you get. Should you have any questions please feel free to call us on our cell 713-256-8869. Se Habla Espanol! For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before ... moreshipping the item. Lately(summer. 2012) we have buyers taking advantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge All payment must be received in the exact due amount before shipping. Preferably tim
|
|
Big Shot Flexible Denture Injection Press USES CDM TCS VALPLAST FLEXITE FRS
NO RESERVE! We are no longer doing flexi's as our denture tech that did them has moved on. Machine works great- He used to do pink as well as clear materials bang. Bang, bang. One after another. You need 110v and a compressed air source for it to operate. Temp control is accurate and all numbers/functions work as they are supposed to. This unit heats the cartridge of your brand choice to your desired temp. Holds@ temp. your desired time, injects and removes the plunger. All by itself! No cranking the wheel- just push the button and walk away. ONLY WHAT IS PICTURED IS INCLUDED. Nothing more available. Located in Crystal Lake IL 60012. Local pickup is fine. Please contact me if you have any questions before bidding. ONLY SHIPS TO LOWER 48 UNITED STATES. NO CANADA- NO MEXICO. Only 48 lower states. Thanks!
|
|
USED HANAU DENTURE PRESS WITH WRENCH AND WITH HEAVY DUTY HANDLER 22C SPECIAL FLA
USED HANAU DENTURE PRESS WITH WRENCH AND WITH HEAVY DUTY HANDLER 22C SPECIAL FLASKS. Click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge This is a lightly used complete Hanau denture press with wrench and with Handler 22C matching Heavy Duty Special upper and lower flasks. Everything here is in very fine condition. Sold"as is" What you see is what you get. Should you have any questions please feel free to call us on our cell 713-256-8869. Se Habla Espanol! For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is ... moresubject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item. Lately(summer. 2012) we have buyers taking advantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! All payment must be received in the exact due amount before shipping. Preferably timewise
|
|
COMPLETE HANAU BRONZE DENTURE PRESS WITH UPPER AND LOWER FLASKS & HANDLE ,WRENCH
You are bidding on a complete Hanau bronze denture press with upper and lower flasks.Wrench and side handle to hold press when tightening. It is in great working condition. See photo's
|
|
VINTAGE HANAU DENTURE PRESS UPPER AND LOWER FLASKS with compress
Used Hanau denture flasks and press includes upper and lower complete flask. Ask any questions before bidding please. Photo show condition.
|
|
2 Hanau Varsity Denture Flasks, with Hand Press
Both lower flasks. In excellent working condition. All matching numbers. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1455f42ec42-0x10a-
|
|
Antique BIG BOY Screw-Type Denture Bookbinding Press
For sale is an Antique BIG BOY Screw-Type Denture/Bookbinding Press. The press measures 9 ¾” in height(closed) 10” in width(at base) and 4 ⅝” in depth, The handle turns freely but requires a little effort. The handle measures 12 ¼” in width. The front of press is marked BIG BOY(top) and 19 8(bottom) We will gladly combine shipping for multiple wins so please check out our! Please email us if you have any questions prior to bidding. Thank you for looking at our auctions! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1458b5dcfd0-0x10c-
|
|
Vintage Brass/Bronze Luxene Inc. New York, NY Dental Ejector Denture Press Vise
This Clamp/Vise/Press was purchased as I thought it was a boat prop bearing press. As it was covered in what appeared to be salt/water deposits. I intended to hang it on my wall, but after a little research, I learned that Luxene Inc. was an old dental equipment company that was in business during the early 50s. What I thought were salt/water deposits. I now believe to be amalgam, molding material and such. Markings: Lexene Inc. New York. NY" and I believe the bottom right leg reads" No. 3" Frame appears to be made of solid bronze and the screw and handle appear to be made of metal. The press point of the screw appears to be capped with another piece of Bronze. To the top of the frame is 8 1/2" the outside width of the frame is also 8 1/2" The screw length is 6 11/16" Top shelf 5" high and bottom shelf is ... moreat 3 3/4" Weight is apron 8 lbs. 2 oz. Let me know if you have any questions.
|
|
Manfredi Italy OL 463 Dental Lab 3 Flask Hydraulic Laboratory Denture Press
Manfredi Italy OL 463 Dental Lab 3 Flask Hydraulic Laboratory Denture Press Used NOTE: This item slowly loses pressure over time- sold as is Can press up to 3 large flasks at a time Designed to easily work with half of its maximum load; the pressure exerted at 200 atm is 8000 kg. While its max. load at 400 atm is approx. 16,000 kg, Working pressure- 200 atm, Loading pressure- 400 atm, Width- 20 cm; Depth- 22 cm; Height(when not in use) 48 cm, Net weight/ Gross weight- 22 kg/ 24 kg, Comes with everything shown only, Normally sells $949+ Make an offer! Questions? Message us or call us at 859-881-3996. PAYMENT If you wish to pay with a method other than PayPal please call us at the number listed above. We expect payment within 7 days of invoice as per ebay policy. Please read below before payment. SHIPPING Pricing: Ebay automatically calculates ... moreshipping costs. Which may be inaccurate. Whether or not this is the case. If you have a problem with the price or service listed on the invoice for shipping please contact us BEFORE PAYMENT and we will try to correct the problem. Special requests: Please contact us for special shipping requests(alternative services. Speeds) BEFORE PAYMENT and we will invoice you accordingly. We may combine shipping for multiple orders. Handling time: Handling time of items as-is varies from 1 business day for small items to 7 business days for large chair packages. This starts from the time of payment. Customizing items such as stools and chair packages adds additional handling time. International shipping: We can ship to many countries. Please contact us for a shipping quote and provide your address. Keep in mind we are not responsible for taxes. Duties, or customs fees imposed by your country. WARRANTIES Warranties(if included) cover 3 months parts and labor and the remaining period(if any) covers only parts. You must call us BEFORE initiating any local warranty repairs so that we can evaluate the situation and provide assistance. We reserve the right to deny warranty reque
|
|
Coe- Bilt Pneumatic Denture Press Good Cond
Used but in good working condition AS IS!
|
|
Handler & Hanau Dental Denture Flask Press
Handler& Hanau Dental Denture Flask Presses Includes both items in the photo Used- Good Working Condition Disclaimer. Ebay requires the following wording to list in this category and is included for reference: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-146a8294dfd-0x106-
|
|
Ray Foster APEX Dental Denture Flask Press
Ray Foster APEX Dental Denture Flask Press Used- Good Working Condition Disclaimer. Ebay requires the following wording to list in this category and is included for reference: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser.
|
|
Vintage Buffalo Dental Co. Denture Press
Well used vintage denture press. Stamping hard to read but looks like Buffalo Dental Co. thread wear on lower part of screw ram but still serviceable, probably was never lubricated, $12 H&S a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-146c5f4d3d2-0x10a-
|
|
Bigboy Denture Processing Press Screw Type
Up for sale is this used Bigboy press for processing. Press shows normal ware at base. The grey sponge is for shipping. I didn't take it out for picture. If you have any questions email me.
|
|
Hanau Upper and Lower Denture Flask Set with curing Press Curing Press
Bronze Hanau Denture flasks with spring loaded curing press. Set numbers match, normal finish wear, only condition issue: one knockout plate has lost some edge flange, no problem just Vaseline heavy enough to prevent plaster leak. $12 H&S
|
|
USED COMPLETE TELEDYNE HANAU BRONZE DENTURE PRESS W/UPPER & LOWER FLASKS
USED COMPLETE TELEDYNE HANAU BRONZE DENTURE PRESS W/UPPER& LOWER FLASKS. Click picture to enlarge This listing is for a used complete Teledyne Hanau Bronze Denture Denture Press with upper and lower flasks and with new wrench. The press also has its lifting handle. The upper flask set is the Hanau Varsity with all pieces for number 09568. Adn the lower flask is the Hanau Varsity with all pieces for number 04440. It weighs 12 pounds net. This item has been checked ou tin our lab and it is working fine. There is no original box or manual with this unit. What you see is what you get. Sold"as is" Should you have any questions please call us at our cell 713-256-8869. For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. ... moreS. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item. Lately(summer. 2012) we have buyers taking advantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these
|
|
Handler & Son Little Giant #33 denture flask manual screw press
Handler& Sons denture flask press Model#33; manual screw press Used. Good solid condition Buyer pays shipping Accept Paypal
|
|
Dental Lab Coe-bilt pneumatic denture flask press
used Coe-Bilt pneumatic denture flask press. two pressure settings for trial packing and final packing of flasks. Works well. No issues.
|
|
Hanau solid brass denture flask press complete
Solid brass denture press in fantastic condition. Still works. All pieces including wrench are there. Every piece is there and complete. Excellent condition. Feel free to ask any questions.
|
|
Success Denture System metal cylinder for press. PERFECT.CHEAP!
Success system metal cylinder for press syringe. PERFECT. These cost $80 new! The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147fcfcdc22-0x11a-
|
|
Dental Lab Coe-bilt pneumatic denture flask press Reconditioned REPO L@@K
From a recent repo we have this flask press. We ran air to it and it worked perfect. We priced it for what 1 went for on a auction Please make offer. Used Coe-Bilt pneumatic denture flask press. two pressure settings for trial packing and final packing of flasks. Works well. No issues. Good Luck dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1481b2c83ca-0x10d-
|
|
Handler Little Giant Denture Press Dental Lab
Handler Little Giant Denture Press Dental Lab, Click to View Image Album Click to View Image Album UP FOR AUCTION! Handler Little Giant Denture Press Dental Lab Buyer pays Shipping. Weighs 14lbs packed. Questions welcome. PLEASE NOTE ALL ITEMS WILL SHIP WITHIN EBAY's REQUIREMENTS AND WE WILL NOTIFY YOU THROUGH PAYPAL WITH THE SHIPPING INFORMATION. Please see pictures and ask any questions before bidding. NO INTERNATIONAL. Please note that sometimes the shipping calculator is high. Please realize that if you overpay the shipping. We will refund the difference to your Paypal account after the item is sent. Questions welcome. Be sure to check out our other auctions. We are happy to combine items to $ ave YOU $ hipping costs. 123SOLD is a listing agent only. All items are on consignment and any information used is received from each consignor ... moreand/or other outside sources. Thank you and good luck. Please add us to your favorites by clicking Payment I accept the following forms of payment: PayPal FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14853743a2e-0x111-
|
|
Rare Vintage Brass Denture Dental Press Flask Buffalo Dental Mfg Pat 1920 Hanau
Just purchased from an old Buffalo estate that had originally housed a dental practice. This is a rare patent 1920 solid brass dental denture press with flask, manufactured by the Buffalo Dental Manufacturing Co, it is heavy and has its original big allen key. Approximately 7 1/2" tall, the handle is wooden.
|
|
USED YATES CHICAGO YD DENTURE PRESS -- WORKS FINE
USED YATES CHICAGO MODEL YD DENTURE PRESS- WORKING FINE. This is a used Yates Chicago Model YD Denture Press. 12 inch diameter space needed to operate screw handle, 14 inches maximum height, 4 inches body depth by 7 inches body width. Net weight is 12 pounds. There is no manual or original box for this item. Everything will be packed very carefully and well-padded to insure safe delivery to you. What you see is what you get. Sold"as is" Should you have any questions please call us at our cell 713-256-8869. Se Habla Espanol! For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. ... moreIf this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item. Lately(summer. 2012) we have buyers taking advantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! All payment must be received in the exact due amount before shipping.
|
|
antique Hanau denture press
Made in Buffalo. New York solid brass
|
|
Vintage brass Hanau Engineering Buffalo Dental lab denture mold press no flasks
Description Vintage Hanau dental mold press. Made of solid brass(or bronze? Measures 7 1/2" tall x 4 1/4" wide and weighs 5 1/2 lbs. It could use a little cleaning, I do not have any of the flasks. All payments are due within 5 days. If you need more time to pay. Please contact me and we can work out the details, it usually won't be a problem. If I receive no contact or payment after 5 days, I reserve the right to relist the item or offer it to the back-up bidder directly. Ebay policy requires that I only list Paypal as the payment option. but it all spends if you know what I mean. I ship USPS. FedEx and UPS(whichever is most economical for you) usually within 1 business day of receipt of cleared payment. I will try to combine shipping on multiple items to save you money. Most items are also available for local pick up free ... moreof charge. INTERNATIONAL BIDDERS* Customs fees for your country are your responsibility. Please do not ask me to misrepresent item values on customs forms. I will not do it. If this is unacceptable, please do not bid. USPS First Class Intl. shipping is available for items under 4 lbs. Please understand that while this option is economical. It cannot be tracked and delivery can also be very slow(Customs processing can take up to 6 weeks in some cases) So please be patient. If you prefer tracking, please choose the Priority Mail shipping option. If any item is not as I described just return within 14 days and I will refund your purchase. The wide variety of items I sell come from local estates/auctions and are in used condition and therefore. Will show some wear. I will describe the item as best I can to point out any major flaws and always welcome any additional information anyone would like to share. I leave appropriate feedback for every transaction and would appreciate the same in return. If you do not believe our transaction warrants possitive feedback, please contact me first for resolution.
|
|
Vintage Hanau Brass Dental Denture Press Solid Brass Flasks Wrenches
Two Presses. Five Flasks, Two Wrenches, Plus extras. Both Presses are missing"the top plate" Which sits between the screw and the flasks. I put a couple of pieces of aluminum with them which seems to make them work fine(see last 3 pics) But. I am no expert on these. Vintage Brass Hanau Dental Denture Press. Vintage Handler& Sons Press. Five complete Flasks. Plus. Two Flasks missing tops.Two Wrenches. A few extra discs and screws. Pics show condition. Emessage any questions. Thanks for Looking! Check out my other items,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14b4b1ac9d0-0x104-
|
|
Vintage Denture Press Flask Brass Upper Top Ejector Type Hanau Engineering
VintagenVarsity Upper Ejector Type Denture Press Flask Top Brass made by Hanau Engineering Co. Buffalo, NY
|
|
DENTAL DENTURE INVESTING PRESS HANDLER
YOU ARE BIDDING ON A HANDLER DENTURE INVESTING PRESS. IT IS IN VERY GOOD CONDITION AND IS VERY VERY HEAVY DUTY. IT WILL PROBABLY LAST FOREVER BECAUSE OF THE QUALITY OF CONSTRUCTION. BUYING AS IS. SEE PICS. VERY HEAVY ITEM. SHIPPING IS TO THE LOWER 48. NO NEGATIVE FEEDBACK BIDDERS. FLAT RATE SHIPPING 24.95. AY QUESTIONS PLEASE E-MAIL ME BEFORE BIDDING.
|
|
Austenal Denture Press
It's in a good working condition. Disclaimer. Ebay requires the following wording to list in this category and is included for reference: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. JMCKO. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14b9eba44fa-0x111-
|
|
USED OUR NO. 1 BRONZE DENTURE PRESS W/WRENCH -- NO FLASKS
USED OUR NO. 1 BRONZE DENTURE PRESS W/WRENCH- NO FLASKS This is a used Hanau bronze denture press with wrench. There are no flasks with this. Sold"as is" What you see is what you get. Should you have any questions please feel free to call us on our cell 713-256-8869. Se Habla Espanol! For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item. Lately(summer. 2012) we have buyers taking advantage of us, buying and then being destructive(especially ... moreelectrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! All payment must be received in the exact due amount before shipping. Preferably timewise within seven days of the closing of the listing. Please wait for invoicing before paying for combined or adjusted shipments. Item is sold"as is" No returns. Before shipping, all payment must be received in the exa
|
|
HANAU VARSITY UPPER & LOWER DENTURE INVESTING FLASKS W/PRESS DENTL LAB BRASS
YOU ARE BIDDING ON A HANAU VARSITY UPPER AND LOWER BRASS DENTURE INVESTING FLASKS. BOTH HAVE MATCHIN NUMBERS ON ALL 3 MAIN PIECES AND BOTH HAVE METAL DISCS INSIDE. BRASS PRESS IS INCLUDED. ALL ARE USED BUT IN VERY GOOD CONDITION. BUYING AS IS. SEE PICS. SHIPPING IS TO THE LOWER 48. NO NEGATIVE FEEDBACK BIDDERS. FLAT RATE SHIPPING 12.95. ANY QUESTIONS PLEASE E-MAIL ME BEFORE BIDDING.
|
|
USED COMPLETE HANDLER BRONZE DENTURE PRESS W/WRENCH &MATCHING UPPER & LOWER FLKS
USED COMPLETE HANDLER BRONZE DENTURE PRESS W/WRENCH& MATCHING UPPER& LOWER FLASKS. This is a used complete Handler denture press with matching Handler Atlas Varsity upper and lower flasks. And with wrench. Everything is in very fine condition. Sold"as is" What you see is what you get. Should you have any questions please feel free to call us on our cell 713-256-8869. Se Habla Espanol! For any general questions you may have. Please feel free to contact us at the office 713-957-8868. The sale of this item may be subject to strict regulation by the U. S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid or buy this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the ... moreitem. Lately(summer. 2012) we have buyers taking advantage of us, buying and then being destructive(especially electrical) of the product in some way on their own. So we just ask of you to call us first; we will accommodate you absolutely the best that we know how and this is our normal experience. We are here to impress you with our product and service to encourage you to buy more from us. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We will not undervalue merchandise or mark the item as a gift on customs forms. Doing that is against U. S. and international laws. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for more great items! All payment must be received in the exact due amount before shipping. Preferably timewise within seven days of the closing of the listing. Please wait for invoicing before paying for combined or adjusted
|
|
Vintage Hanau Brass Dental Denture Press Solid Brass Flasks Varisty Ejectors
Vintage Hanau Brass Dental Denture Press Solid Brass Flasks
|
|
Vintage Ray Foster Brass Denture Press Dental Lab Teeth Dentist Flask Spring
Vintage Ray Foster Brass Denture Press Dental Lab Teeth Dentist Flask Spring Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: Item is one Vintage Ray Foster Brass Denture Press.It is marked Los Angeles and Ray Foster. This one has some initails and numbers scratched into it. Features: 7-1/4 inches tall 4-1/2 inches long 2-1/2 inches wide Overall condition is Good Please see all pictures(actual Item) or come by in person to inspect this item. We are located at 829 n.Tustin Ave. Orange, CA 92867-7130. We require Payment for Item within 4 days.If you need more time to pay.Contact us for approval prior to bidding. I do Not end the auctions early.Or modify the price. So please don't ask. Local pickup is always welcomed. Shipped items will be charged a handling fee. Please ask ... morequestions before bidding Your bid is you contract All items are secondhand Shipping: Domestic packages are sent UPS ground Insured Signature Required to all physical addresses USPS Insured to PO Boxes. Buyer pays shipping and insurance costs. Buyer pays shipping for returned or exchanged items. All packages are insured International Packages are sent USPS Airmail Insured International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. Do not confuse them for additional shipping charges No Falsifying documents No Shipping to Indonesia or Nigeria! We ALWAYS offer Local Pick up. Payment: Auction Terms(Not Negotiable) Your bid is your contract to pay for the item. We accept: MASTER CARD/VISA/AMERICAN EXPRESS/DISCOVER/DINERS CLUB Merchant Credit accepted Direct by Telephone 714-633-0740. California Sales are required to pay 8% Sale Tax We are:
|
|