In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
297.49
Buy It Now
$22.00 Shipping
Condition: New – Open box
Location: Mesa, United States
YOU ARE BUYING ONE SPEEDFAM 0810-717415 WAFER CARRIER 2805-700924 ASSEMBLY 200MM. 0.125 HOLES. (MWUPWSRX3)CJ (G1CAGE5C).
$
1650.00
Buy It Now
$16.26 Shipping
Condition: Used
Location: Buda, United States
Novellus C-1. SN: 146092. Five-one-two-nine-two-eight-five-five-five-three Corporate Office. Two-zero-eight-nine-eight-two-one-eight-six-two Direct Line. ... moreNicole Jackson at getsparesllc. (See Hours of Operation, above).
$
2250.00
Buy It Now
$26.31 Shipping
Condition: Used
Location: Woodruff, United States
This listing is for a 47” SpeedFam Accu-Flat Plate Flatness Measuring Instrument Gauge. It is equipped with two Starrett 25-111 indicators with carbide ... moretips. The indicators are in immaculate cosmetic condition. The center indicator works well but retracts slower than the other one (may need to be cleaned). The aluminum accu flat bar is in good condition with only minor minor scuffs and scratches. The three carbide contact tips remain in great shape with no chips. This unit measures approximately 47” long x 3 5/16” wide x 3” tall. The wood case is included and remains sturdy. It latches as it should. The case does has some wear and grimes. A short instructions manual is included. Please see all photos for best idea of item condition. Shipped with FedEx Ground.
$
9500.00
Buy It Now
Condition: Used
Location: Orange, United States
Category:WAFER GRINDING, LAPPING & POLISHING. (1) for rough polishing. (1) for final polishing. Polishing plate rotation speed: 6 - 36rpm. Pressure plate ... moredrive motor: 0.2kW, 4P. Pressure plate drive speed: 6-36rpm.
$
2495.00
Buy It Now
$45.00 Shipping
Condition: Used
Location: Union City, United States
Manufacturer: SpeedFam. MFG Model: Diamond pellet conditioners with size of 18.5” Dia.
$
6999.99
Buy It Now
Condition: New – Open box
Location: Phoenix, United States
This unit was excess inventory from a CMP system refurbisher. (1) Are you the end-user of this item?. If you don't see it, you probably won't get it.
$
50.00
Buy It Now
$15.76 Shipping
Condition: New – Open box
Location: Milpitas, United States
IPEC Speedfam. 372M-45120-1, Retaining ring, 150mm carrier, with lip, PVDF. Untested, looks new, we sell as is. See pictures for more details. We do not ... morehave the capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. We sell all equipment with no warranty expressed or implied regardless of condition. We don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Customers are invited to inspect products prior to purchase. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are final and no return is accepted.
$
358.48
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Speedfam SFI-965521 is used working surplus. The physical condition is good. But there are some minor scratches from previous use and handling. Part ... moreNo: SFI-965521 Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: 10 in. x 10 in. x 10 in. 6 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 11 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business
$
4499.99
Buy It Now
Condition: New – Open box
Location: Phoenix, United States
Platen Thickness: 3". If you don't see it, you probably won't get it. Overall Height: 15".
$
50.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
$
1750.00
Buy It Now
$107.81 Shipping
Condition: New – Open box
Location: Milpitas, United States
Farmon I.D. 420707. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA INA InBus ... moreEngineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
350.00
Buy It Now
$15.95 Shipping
Condition: Used
Location: Phoenix, United States
Very good condition. No Leaks. 15:1 gear reduction. Comes as shown. 
$
14499.99
Buy It Now
Condition: Used
Location: Phoenix, United States
Part Number: 967864. I believe this unit is new but I have no way to verify it. If you don't see it, you probably won't get it. Serial Number: CTL-22752, ... moreATM-17291, TRA-1691.
$
299.99
Buy It Now
$68.44 Shipping
Condition: New – Open box
Location: Phoenix, United States
Grid Size: 17 mm x 17 mm. (1) Are you the end-user of this item?.
$
95.00
Buy It Now
$10.52 Shipping
Condition: Used
Location: Boise, United States
(See Hours of Operation, above). Gasonics L3510 Gasonics PEP-3510.
$
1199.99
Buy It Now
$57.88 Shipping
Condition: Used
Location: Santa Clara, United States
$
75.00
Buy It Now
$18.65 Shipping
Condition: Used
Location: Plano, United States
$
75.00
Buy It Now
$18.65 Shipping
Condition: Used
Location: Plano, United States
$
65.00
Buy It Now
$20.13 Shipping
Condition: New – Open box
Location: Milpitas, United States
Price is for all 27 units.
$
25.00
Buy It Now
$15.76 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details.
$
20.00
Buy It Now
$11.65 Shipping
Condition: New – Open box
Location: Milpitas, United States
Farmon I.D. 420920. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA INA InBus ... moreEngineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
60.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details. Novellus Systems NSK NT International NTRON Numatics NupronView Corp. OnTrak Systems Inc. Opal Optem International OPTO ... more22 Osram Oramir Oregon Micro Oren Elliott Products Oriel Oriental Motor Oriental Motor Co.
$
25.00
Buy It Now
$15.76 Shipping
Condition: New – Open box
Location: Milpitas, United States
$
5.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA ... moreINA InBus Engineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
2995.00
Buy It Now
$75.00 Shipping
Condition: Used
Location: Union City, United States
The length of this system is 2 ft (24"). It is constructed of light weight, sturdy aluminum and is complete with master setting stand for automatic continuous ... morepositive flatness verification.
$
500.00
Buy It Now
$21.66 Shipping
Condition: Used
Location: Plano, United States
$
895.00
Buy It Now
$107.81 Shipping
Condition: For parts or not working
Location: Milpitas, United States
Farmon I.D. 421553. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA INA InBus ... moreEngineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
249.99
Buy It Now
$24.24 Shipping
Condition: New – Open box
Location: Phoenix, United States
The Item may vary from picture as manufacture may change model appearance. The sale of this item may be subject to regulation by the U.S. Food and Drug ... moreAdministration and state and local regulatory agencies.
$
50.00
Buy It Now
$15.76 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details.
$
1100.00
Buy It Now
$20.34 Shipping
Condition: Used
Location: Milpitas, United States
Farmon I.D. 421591. Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves ... moreGD California GE Fanuc GE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
1100.00
Buy It Now
$20.34 Shipping
Condition: Used
Location: Milpitas, United States
Farmon I.D. 421592. Ipec Speedfam Novellus Berkeley Process Conrol Inc. ASM121-A-0/B-22-NB/10 Servo Motor, AC Brushless Servo Motor, Torque 20lbs, 4500RPM. ... moreFastcom Faulhaber Federal Pioneer Federal Products Co.
$
50.00
Buy It Now
$15.76 Shipping
Condition: New
Location: Milpitas, United States
$
750.00
Buy It Now
$18.65 Shipping
Condition: Used
Location: Plano, United States
We have two of these, only one has a ding. One is in excellent condition.
$
25.00
Buy It Now
$4.90 Shipping
Condition: New – Open box
Location: Milpitas, United States
See the pictures for more info.
$
160.00
Buy It Now
$18.59 Shipping
Condition: New
Location: Milpitas, United States
Farmon I.D. 328707. Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves ... moreGD California GE Fanuc GE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
20.00
Buy It Now
$15.76 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details.
$
90.00
Buy It Now
$15.33 Shipping
Condition: Used
Location: Plano, United States
Black Box 8 Position Video/ Keyboard Switch SW934A New In Box Catalyst PN: F035A-1D
$
75.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
Farmon I.D. 409431, 409432, 409433, 409482, 409483, 409484, 409485, 409486, 409487, 409488. Price is one one set. Set includes a lot of five.
$
50.00
Buy It Now
$15.76 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details. Price is for 1 lot. We have 2 lots in inventory.
$
50.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
$
450.00
Buy It Now
$13.40 Shipping
Condition: New
Location: Milpitas, United States
Bag unopened. see pictures for more detail. These products are subject to export restrictions under U.S. law.
$
150.00
Buy It Now
$24.01 Shipping
Condition: New – Open box
Location: Milpitas, United States
8 IPEC Speedfam Novellus 955928. Bridge, containment. looks new, Sell as is, Untested, See pictures for more details. Price is for all 8. We do not have ... morethe capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. We sell all equipment with no warranty expressed or implied regardless of condition. We don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Customers are invited to inspect products prior to purchase. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are final and no return is accepted.
$
350.00
Buy It Now
$110.05 Shipping
Condition: Used
Location: Milpitas, United States
IPEC Speedfam 0230-737543 SMC EX121-SDN1 Device Net Send Unit Manifold Assembly with 16 Pneumatic Solenoid VQ1171-SLO-CO and SMC VV5Q17-ULB970007 Interface ... moreUnit. Price is for one assembly. Whenever necessary.
$
25.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA ... moreINA InBus Engineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
125.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA ... moreINA InBus Engineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
60.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA ... moreINA InBus Engineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
100.00
Buy It Now
$20.13 Shipping
Condition: New – Open box
Location: Milpitas, United States
Farmon I.D. 414620. 3 IPEC Speedfam, 372-15142-1, Gear, Sprocket. Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion ... moreGaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc GE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
30.00
Buy It Now
$18.04 Shipping
Condition: New
Location: Milpitas, United States
Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc ... moreGE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
35.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA ... moreINA InBus Engineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
75.00
Buy It Now
$15.76 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details.
$
25.00
Buy It Now
$4.90 Shipping
Condition: New – Open box
Location: Milpitas, United States
See the pictures for more info.
$
75.00
Buy It Now
$15.76 Shipping
Condition: New – Open box
Location: Milpitas, United States
IPEC Speedfam Novellus 372-15141-1 Support Damper pp1000. Untested, looks new, we sell as is. See pictures for more details. Price is for 1 unit. We have ... more6 units in inventory. We do not have the capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. We sell all equipment with no warranty expressed or implied regardless of condition. We don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Customers are invited to inspect products prior to purchase. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are final and no return is accepted.
$
1250.00
Buy It Now
$45.10 Shipping
Condition: Used
Location: Milpitas, United States
3 IPEC Speedfam 372-45236-2 Assy carrier base 200mm. Untested, Do not know ifcomplete. Comes with what you see in picture only. we sell as is. See pictures ... morefor more details. We do not have the capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. We sell all equipment with no warranty expressed or implied regardless of condition. We don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Customers are invited to inspect products prior to purchase. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are final and no return is accepted.
$
150.00
Buy It Now
$16.23 Shipping
Condition: New – Open box
Location: Milpitas, United States
4 IPEC Speedfam Novellus 959218 Shaft. Mounting Roller Box. Untested, looks new, we sell as is. See pictures for more details. Price is for all 4 units. ... moreWe do not have the capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. We sell all equipment with no warranty expressed or implied regardless of condition. We don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Customers are invited to inspect products prior to purchase. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are final and no return is accepted. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146caa2bc64-0x121-
$
25.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA ... moreINA InBus Engineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
25.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
See pictures for more details. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA ... moreINA InBus Engineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
1840.00
Buy It Now
$250.00 Shipping
Condition: Used
Location: Israel
0710-717023-B-711C Spool Drive. 0710-717682 RING GEAR.
$
20.00
Buy It Now
$18.04 Shipping
Condition: New – Open box
Location: Milpitas, United States
4 IPEC Speedfam 966302 clamp plate. Looks new. Sell as is, Untested, See pictures for more details. We do not have the capability to test these equipment. ... moreThese are un-tested and we sell as is. see pictures for more detail. We sell all equipment with no warranty expressed or implied regardless of condition. We don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Customers are invited to inspect products prior to purchase. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are final and no return is accepted.
$
300.00
Buy It Now
$14.78 Shipping
Condition: New – Open box
Location: Milpitas, United States
8 new Ipec Speedfam 3980-740159 TBW ind.
$
100.00
Buy It Now
$15.76 Shipping
Condition: New – Open box
Location: Milpitas, United States
1 2 3 4
 In 

Former Listings  
 
SPEEDFAM 24" Lapping Machine, Model 24BTGW - Up and Running!
SPEEDFAM 24" Lapping Machine Water Cooled Pneumatic Pressure Holddown 4 Retaining Rings Machine is running and ready for any inspection. Contact Larry via email or phone at 517-782-2808 ext 23 with any questions or to schedule a showing. Thanks. Note: ALL machinery is sold AS IS WHERE IS. L&K Leasing and its owners are not responsible for any and all damages done during Loading. Transport, or UnLoading of said machinery. Any damages which may result during loading, transport, or unloading of machine is the sole responsibility of the buyer. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13e03f28fc2-0xf1-
SPEEDFAM MODEL 615 THRU-FEED GRINDER
This is a Speedfam Thru Feed Grinder model 615. 480 volt. Serial 6TFG 15110. It is in good working order and has been recently taken out of use due to plant closing. I will load on your flatbed at no charge. Buyer to schedule and pay for all shipping charges. Weighs about 5500lbs. I am happy to answer any questions or feel free to send me an offer. Uses standard grinding wheels size 18" x 3" x 10" with 16 bolt circles or 450mm x 80mm x 250mm. Conveyor system consists of a 6" 150mm) wide continuous belt driven by 1 hp variable speed drive at rates from 0-36 ft/m. Conveyor passes over a 36" variable power electromagnetic chuck which serves as a solid table. The central hydraulic system supplies power for rapid positioning of the grinding wheel. Piece part size control to plus or minus.001 is accomplished by and air ... moregauging system which automatically and continuously compensates for wheel wear. Comes with a coolant system mounted on the back. Service manual and schematics included.
SPEEDFAM 32" Lapping Machine, Model 32BTAW - Up and Running!
SPEEDFAM 32" Lapping Machine Water Cooled Pneumatic Pressure Holddown 4 NEW Retaining Rings Parabolic Coolant Pump System New Grinding Segments with Safety Cage Machine is running and ready for any inspection. Contact Larry via email or phone at 517-782-2808 ext 23 with any questions or to schedule a showing. Thanks. Note: ALL machinery is sold AS IS WHERE IS. L&K Leasing and its owners are not responsible for any and all damages done during Loading. Transport, or UnLoading of said machinery. Any damages which may result during loading, transport, or unloading of machine is the sole responsibility of the buyer.
Speedfam Corp. - Free-Abrasive Machining Brochure
Published by Speedfam Corp. Des Plaines, Illinois in 1970. This brochure shows machining tools, accessories, and information about parts that you are needing for your manufacturing business. Has weights for different types of materials such as nickel, glass, bakelite, stainless, teflon, etc. Has lots of photographs and information for different machines that can be purchased. Bright red, white, and black softcover measures 8 1/2" x 11" has 19 pages. Has two fold-out pages. Is in very good condition. Shipping is USPS First Class Mail. Ships within two business days after payment is received. Paypal accepted.
Lot of 2 - Speedfam Optical Flats - EE4
Lot of 2- Speedfam Optical Flats- EE4 The units are in good cosmetic condition. It comes as shown in the photo. Please feel free to email with any questions that you may have. And I will do my best to try to help. Our phone number is shown below, please feel free to call also. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. We do accept personal checks. Bank checks, company checks, and bank wire transfers. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want ... moreyou to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best to ship quickly. But never at the expense of quality delivery. RETURN POLICY: This unit is being sold as-is. The auction description is written as a guide. We strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953. And we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
speedfam loose abrasive lapping machine, free abrasive
Item is used but in great shape. Has been used as a test machine for determining material removal rates and grinding ratio, MRR and G-ratio. All items pictured are included, item will ship in a wooden crate via ups or fed-ex.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13eb194378d-0x102-
Speedfam Drum Assembly B467050 For Grinding Machine
08 6F Part number A-30085. 74 teeth, drum approx. 6" OD, approx. 1" shaft, weight is approx. 24 lbs. Please email any questions or requests for additional pictures before purchasing.
12"SPEED FAM SPEEDFAM FREE ABRASIVE LAPING MACHINE SND-12B-931 POLISHING LAPPING
Check out my! SPEEDFA M SND-12B-931 FREE ABRASSIVE MACHINE LAPPING 12" DIAMETER WITH ACCESSORIES 110 VOLTS. SINGLE PHASE TABLE TOP Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 14 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. ... moreBefore sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, iro
Replacement Concentric Lapping Plate For SpeedFam 12" Dia. x 7/8"
Replacement Concentric Lapping Plate For SpeedFam Speed Fam 12" Dia. x 7/8" This appears to be Unused or Manufacturer Refurbished Pictures are of the actual item.
2 IPEC Speedfam Novellus 952363, Entegris Q4000 Ball valve
2 IPEC Speedfam Novellus 952363. Entegris Q4000 Ball valve, used, untested. Sell as- is, See pictures for more detail. We describe the items and the condition as best as we can. If there are any questions or you need more info, please contact us and we will reply the same day. No other accessory are being sold with the item(Cables, manuals, Software, etc. unless it is mentioned in the description and shown in the picture. We do not have the capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. Farmon Inc. sell all equipment with no warranty expressed or implied regardless of condition. Farmon Inc. don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Farmon Inc. invites you to inspect products prior ... moreto purchase please email us at info@farmoninc.com or call us at 510-573-0047 to schedule a time. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are Final and No return are Accepted. We are also interested to buy your unwanted excess inventory. Please call us to review and remove your inventory. We can sometimes do in the same day.
7 Computer Pins-90's era-T.T-40,Speedfam,SoftSecurity -SABRE-C,Ntl In& Force.com
Note:Please read before Bidding ~.~ 3 Hi-tech Computer Pinback Buttons 1990's era Saber- C TM 3.0h! Software Security(Porcupine- pin) T.T-40, Speedfam. National Instruments Force.com& BMIB-310 Bonus Basics Pinback Buttons in Very Good Condition Measures 1½" to 2" across ~Items in Lots NOT SOLD SEPERATELY~ Sorry No History-most items bought 2nd hand NO other offers accepted.Either during or AFTER Auction ends! Discounts on multiple weekly wins.When paid in 1 single payment Payment is due within 5 days. THANKS! THANKS! p; Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
Lapper Ring Retainers for Speedfam Spitfire
These three(3) retainers are in good used condition. Please ask questions and make offers.
Speedfam 18B5P Double Side Ultraflat Precision Polishers (some w PLC Control)
Speedfam Double Side 18B5P Ultraflat Polisher with PLC Controls Here is excellent selection of Speedfam Large-Frame Polishers. All can be upgraded to"20B" Or 20" Carrier Size These Polishers are18B5P(That is. Carriers 18" in diameter, 5 of them, Double Sided Polisher) Following Value-Added Services are available- Upgrades to larger 20B5P System- Conversion to Lappers with Ultra-Precision Size Controls- Installation and Ongoing Maintenance- Custom PLC Contros and Software- Complete Rebuild with On Site Guarantee Starting prices- Basic Used Machine = $45k With PLC Control = $75k Rebuilt to 20B with New Plates. Bearings, PLC, Etc. Installed, Guaranteed = $165k We will load your truck at our dock at zip 95206 This listing is complicated. We have more than one machine, and here are some variables: Do you want a rebuilt machine? ... moreWhat configuration? How do you wish to pay? We can accept various forms of payment. How do you want shipped? Enjoy! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-141425dcd40-0x104-
Speedfam/SDM Double-Side Polisher: 40" Plates + 12.7" Carriers
Excellent 1m diameter plates with 5 x 322mm carriers: DOUBLE SIDE POLISHING MACHINES at very good price. Carrier Size- 12.8" Pin or Gear Tooth rings. For SUPER-FLAT. SUPER-PARALLEL parts! Originally used with Cerium Oxide for final polish of recording disks Plate diameter = 1m/39" same as Speedfan 16B5P or 16B5L. Complete. Need only tune-up and minor work: $19.995 each(blowout pricing! ABB Motor Drives. PLC Direct Controls(very easy to program compared to Allen Bradley) Also available: Slurry tanks with pumps. Up to 5 polishers can be shipped anywhere in USA via truck for about $4000. Excellent for Silicon. Glass, Sapphire or GaAs. SDM/Speedfam Pin Drive Double Side 1m Polishers. PLATES. TOP& BOTTOM: 1 meter Stainless Stainless Steel with slurry distribution incorporated, CARRIERS: 322.8mm(12.709" tooth valley to tooth ... morevalley. For parts up to 10" 250mm diameter. CARRIER DRIVE: Pin Drive- pins are replaceable. OR Gear Drive DOWN PRESSURE: Pneumatically balanced and regulated. CONTROLS: PLC(Operator Touch Screen may be added as optional upgrade) DRIVE SYSTEM: 3 Motor. Main Motor Control = ABB ACS500 Top plate stationary. Independent speed control of: 1 Ring Gear 2 Lower Plate 3 Sun Gear Other Information: Original Purchaser = IBM(IBM traditionally has purchased only the highest quality tools and outfitted them to most advanced safety and performance specs. Manufacturer = SDM Application = Final Polish Hyper-Flat Glass Data Disks Slurry Used = Cerium Oxide Condition = Good = low hours General Application = Ultra flat glass. Silicon, or Metal parts up to 10" 250mm diameter(Carriers. Of course, as in sample drawing attached to this email, are custom made on CNC laser or other cutting tools to fit parts) Full-size images sent by return email. e-drawing file with purchase
Speedfam TFG 615 Grinding Machine
15 HP spindle drive motor 460 VAC Built 1976
Speedfam TFG 625 Machine
Speedfam TFG 625 Built 1975. 25 HP spindle Drive. For spare Parts.
32" & 48" Speedfam Lapping Machine Manuals - Lapper Manuals only
Speedfam Lapping Machine Manuals for 32" 48" size machines. All different models. F& G series. 32BTAW& 32BTGW& 32BAW& 48BTAW& 48BTGW& 48BTSW& 48BSW and more. Full operators& maintenance instructions. Along with parts lists and prints. Also have available other sizes and makes and brands. Preferred method of payment is cashiers check or company check. Any questions, let us know.
SpeedFAM Chek-Flat Reflective Optical Flatness Measurement Check w/Extras Manual
SpeedFAM Chek-Flat Reflective Optical Flatness Measurement Checker Range of.0001" 0.100"0.0025mm to 2.5mm Range w/Extra optical discs. Manual This is a used. Working flatness measurement checker for any material from glass to metal plates, including silicon wafers for chip manufacturing. Complete system with 3 range discs. And User Manual. Works, light turns on, and you can see the color bands in the view field very clearly(I tried to get a picture of this) Unit sold as is. Shipping will be calculated by location. International shipping is available. Calculated by location.
IPEC Speedfam Novellus PWS SOI 200/200mm Plasma Enhanced Chemical Etching System
IPEC Speedfam Novellus PWS SOI 200/200mm Plasma Enhanced Chemical Etching System Outstanding Condition Includes: Full vacuum system Integral ADE AcuMap II Edwards ADE 31 Pump Affinity Chiller(208v/ 3 Phase) Transformers Controller Stand with Controllers Interconnect cables Full Set of Documentation Manuals Available for inspection Please Email with questions From the Manufacturer: Plasma-Assisted Chemical Etching Summary: A BMDO-sponsored non-mechanical process to shape and polish optical surfaces. Called plasma-assisted chemical etching(PACE) is now being used for precision shaping of ultra-flat silicon wafers and silicon-on-insulator(SOI) wafers. The process has resulted in three products whose total sales topped $10 million in 1997. Technology Description: In 1985. The Perkin-Elmer Corporation(Norwalk, CT) developed a non-mechanical process ... moreto shape and polish optical surfaces. This process, called plasma-assisted chemical etching(PACE) is now being used for precision shaping of silicon and silicon-on-insulator(SOI) wafers. In PACE, a plasma-excited reactive gas chemically combines with the surface material to generate a volatile product that removes a highly predictable and controllable amount of the substrate. A high-speed, thin-film mapper begins the process by measuring the film thickness at thousands of points. The map is used to determine the amount of substrate that needs to be removed at each grid point to achieve uniformity across the wafer. The material is then placed on a programmable stage in the PACE processing chamber where it moves under the spatially confined plasma etch tool. A scanning mechanism is used to control the material removal at each location on the wafer by varying the amount of time the plasma tool head“dwells” at each point. The plasma contains ions, free radicals, and neutral species, all with low kinetic energies. Vertical etch rates of over 100 micrometers per minute have been demonstrated in silicon. These etch rates allow wafer processing speeds comparable to other
SpeedFAM Chek-Flat 3 w/3 Anvils & Manual Moire Optical Flatness tester
SpeedFAM Chek-Flat 3 w/3 Anvils& Manual Moire Optical Flatness tester Includes 3 Anvils. Color coded green, blue, and blue w/ center hole relief. The blue anvils have a coarser pitch for measuring greater deviation from flatness. While the green is for finer measurement. The manual is also included. But its a pretty straightforward device. You just plop your part on the anvil and look through the viewer. Check out the photos for a picture of the fringes visible on a flat block. This machine is in perfect working order. Unfortunately the anvil diameter of 3" is too small for my parts. For the full academic treatment on how this thing works. Check out the chapter in Moire methods in Malacara's"Optical Shop Testing" This is how Speedfam describes it: The Speedfam Check-Flat"sees" rather than"feels" ... moreflatness. It provides instant visual read-out as to flatness of virtually any metal. Ceramic, plastic or glass surface. Check-flat provides the first mean ever of optical measurement of flatness in the range of 0.000001" to 0.0001" The readings are fast. Accurate and easy. To measure a piece or part. It is placed with the surface to be measured facing down on the round glass anvil set into the top of the Check-Flat. The viewing window in the front of the instrument shows a reflection of the surface being measured. Overlaid with a"zebra-stripe" pattern of dark and light lines with a reference number at the rear of this grid. If the"zebra-stripes" are parallel throughout the measured surface. The surface is flat.within the tolerance reference indicated. If the"zebra pattern" appears out-of-straight, on the other hand, the surface is out-of-flat. The check flat grid pattern shows where and how much the surface is out of flat. This is indicated by the number of strip widths by which any non-parallel strips is bowed. Returns accepted for 14 days. Return shipping at buyers expense. Local Pickup Welcome! No international shipping!
HMI & Monitoring Devices for SPITFIRE and SPEEDFAM Lapping & Polishing Machines
Up for sale is the TCP Smart Touch interface device in mint condition. HMI& Monitoring Devices for SPITFIRE and SPEEDFAM Lapping& Polishing Machines. Included: Control Interface Program of SpeedFam/SpitFire Lapping/Polishing Machine. Return: 15 days. 25% restocking fee. Please feel free to contact us if you have any question regarding this listing. PAYMENT: I only ship to confirmed Paypal only. SHIPPING: I will ship this by UPS with tracking. And signature requires. If you would like to ship by Postal Office, please let me know ahead of time. You should inspect the package before signing. If item is damaged during transit. Please refuse the delivery, and I will take care of the issue. ONLY Ship to the 48 Cont US States Sorry this item is not available for Alaska. Hawaii or Puerto Rico residence I do not ship to international addresses.
SPEEDFAM CHEK-FLAT / .0001-.100 FLATNESS TESTER
SPEEDFAM CHEK-FLAT/ 0001-100 FLATNESS TESTER* Click on Images for larger view* Here is a SPEEDFAM CHEK-FLAT 0.0001 to 0.100 FLATNESS TESTER. It comes with one optical flat. It powers on. And the lamp is working. The outer sheath of the power cord is worn, and should be replaced. Shipping Weight: 19 lbs SHIPPING OPTIONS: WINNING BIDDERS WELCOME TO PICKUP. Click HERE for directions. We use UPS for the United States and Canada. We use US Postal Service for Canada and other International Destinations. Email Us for a quote if the shipping calculator does not work for your country. Add Me to Your My eBay Favorite Sellers List For questions concerning your payment. Please call(619) 563-5655. Monday thru Friday 9:30am to 4:30pm PST) Get your questions in early. Thanks much and Good Luck! This auction carries a 14(fourteen) day inspection. Simply ... morecall or email for return refund"GUARANTEE" at full purchase price. Minus shipping cost. Products that have been subjected to misuse, abuse, alteration, neglect or unauthorized repair, additions, improvements, attachment shall be deemed to be a waiver of product warranty by buyer and shall render this warranty null and void. All items are used unless otherwise noted. By placing a bid on this item. You agree to the following Terms and Conditions: Payment must be RECEIVED within 7 days of the auction's closing date. Payment MUST BE in US FUNDS. We will do our very best to ensure that your eBay purchase experience with us is a pleasant one. If any problems should arise. Please let us know Prior to leaving Feedback so that we may try to resolve the problem. You may call us at(619) 563-5655 or use the"Ask Seller a Question" link at the bottom of the page Items shipped via UPS include insu
32" Speedfam Precision Flat Lapping Machine - Lapper
1- used 32" Speedfam Free Abrasive Lapping Machine. New in 1980s. Open face style 4 ring machine. I.D. of rings is 12" Extra rings. Good thick Speedfam segmented lapping plate. Cycle timer control. Push button control station. Slurry pump unit and slurry distributor. 5 H.P. main drive motor and controls, presently wired for 3/60/230 volts. Water cooled machining plate. Center reversing gear. Additional photo's available on request. Manual. Loading on to your truck is free of charge. We can get you freight rates. Preferred method of payment is company check or bank wire transfer. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1454724cd35-0x11a-
Speedfam Free Abrasive Lapping machine INV=14276
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Speedfam Free Abrasive Lapping machine. We do not know how to run it. Stop by and try it out for yourself. No foreign bidders. No exceptions. NO CANADIANS. This item ships by Freight(by truck) It cannot be shipped by UPS or USPS. This item does NOT offer free shipping. If you need to discuss shipping prior to bidding. Call me at 63O-235-66O3. Please do NOT pay until you discuss shipping with me and I invoice you. The buyer has three options: Free pick-up at my location in Berkeley. IL, 60163, I can get a freight quote and charge you my cost of freight and arrange shipping. You can arrange shipping with your own freight company. To whom you would pay. It needs to have electronic tracking capability to comply with PayPal requirements. Title and risk passes to buyer at pick-up. I ... morewill also charge you a palletizing charge. Charge is $15 for a regular pallet and more for custom pallets. Any crating beyond just banding to a pallet will incur an additional cost to buyer. I never ship for free and I do not consider any offers that demand free shipping. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The sell
SPEEDFAM CLEANING SYSTEM 6G5006TP ULTRASONIC GENERATOR
YOU ARE BIDDING ON 1 SPEEDFAM CLEANING SYSTEM 6G-500-6-TP ULTRASONIC GENERATOR. THIS IS USED UNTESTED AND GUARANTEED NOT DOA SHELF SURPLUS FROM A CLOSED KROMAG FACILITY IN SAN JOSE CA. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. G1C X3) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Feedback tools provided by
Novellus Computer OEMC-04-02 0125-739224 SPEEDFAM 2807-112467
Novellus Computer 16MB 70NS Used Catalyst PN: J012-11D
Speedfam SFI-965521 Load Cup working
This Speedfam SFI-965521 is used working surplus. The physical condition is good. But there are some minor scratches from previous use and handling. Part No: SFI-965521 Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: 10 in. x 10 in. x 10 in. 6 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 11 Can't find the answer you're looking for? contact us! Business ... moreHours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business
SpeedFam-IPEC Accu-Flat for Monitoring and Controlling the Flatness of Wafer Po
More Information The SpeedFam Accu-Flat is a measurement system for the plate and the polishing pads used in CMP and double side processing(upper and lower) Quantitative measurements of the degree of flatness on these large surfaces are realized for effective and efficient quality control of your process. Accu-Flat– Drastically reduce time and operation interpretation to check and verify the accuracy of the flat working surface of your free-abrasive or lapping machine. And provide positive measurement of the surface with the SpeedFam Accu-Flat measuring unit. The Accu-Flat eliminates the need for straight edges, shim stock and feeler gauges. It is constructed of light weight, sturdy aluminum and is complete with master setting stand for automatic continuous positive flatness verification. Please call me at 510-585-5586 if you have any questions. ... moreShipping charge can be combined for multiple items purchased.
SpeedFam, IPEC, Novellus 676 CMP Polisher sold as is
This auction is for one SpeedFam. IPEC, Novellus 676 CMP Polisher. This item is sold as is. It comes with all items shown in the photos except the hydraulic lift arms, pumps, and arm pins. I have additional photos available. Payment is due within 3 days of the end of the auction. Payment can be made via PayPal or Wire Transfer. Buyer is responsible for all crating. Shipping and related costs. I can help the buyer with crating or skidding arangements, but buyer is responsible for shipping arrangements. Please take a look at my other auctions. For questions please contact Bill at(208) 286-7810 or
2 IPEC Speedfam Novellus 951679 SMC 3/4" air cylinder NCDA1B400-0400N-A53L-XB9C6
2 IPEC Speedfam Novellus 951679 SMC 3/4" air cylinder NCDA1B400-0400N-A53L-XB9C6. One cylinder has 3 sensors and one cylinder has 2 sensors. Used, untested, minor scratches from use and handling and some dent, sell as is, see pictures for more details. We do not have the capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. We sell all equipment with no warranty expressed or implied regardless of condition. We don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Customers are invited to inspect products prior to purchase. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer ... morepays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are final and no return is accepted.
SpeedFam/IPEC Rng Wear 1420-717038 Foresight Tech Rev C
All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work. Only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item. The Item may vary from picture as manufacture may change model appearance. MHZ ELECTRONICS INC. CALL RICHARD- 1-866-MHZ-ELEC MHZ ELECTRONICS INC. CALL RICHARD- 1-866-MHZ-ELEC MHZ ELECTRONICS INC. CALL RICHARD- 1-866-MHZ-ELEC MHZ ELECTRONICS INC. CALL RICHARD- 1-866-MHZ-ELEC Speedfam/ IPEC Ring Wear PBT Foresight Technologies comes with what you see in the pictures. If you don't see it. You probably wont get it. Specifications are from manufacturer and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. Part#1420-717038 Revision: C Foresight Technologies ... moreRing Wear PBT For More Pictures Please Click the Following: Most of the time. People are impressed with the job we do because we customize our own skids for larger items and we take the utmost care to provide a safe and cozy journey for your item. We strive to make our customers happy and want you to feel that we have treated you with the ultimate respect. If you have any questions please email us: or call RICHARD at 1-866-MHZ-ELEC(1-866-649-3532) Toll Free. 12/18/07 Powered by The free listing tool. List your items fast and easy and manage your active items.
3 IPEC Speedfam 372-45236-2 Assy carrier base 200mm.
3 IPEC Speedfam 372-45236-2 Assy carrier base 200mm. Untested, Do not know ifcomplete. Comes with what you see in picture only. we sell as is. See pictures for more details. We do not have the capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. We sell all equipment with no warranty expressed or implied regardless of condition. We don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Customers are invited to inspect products prior to purchase. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling ... morefee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are final and no return is accepted.
1997 Speedfam 30" Double Sided Lapping Polish Machine
Normal 0 false false false EN-US X-NONE X-NONE Year 1997. 30” Double Sided Lapping Machine. Model#TDSM12B-5L. Serial# T214. 220 V. Sony readout with auto upper& lower limit stops. Down force range: 0– 105 kg(231 lb 7.7663 oz) Plate dimensions: Ø 753 mm( Ø 29.6457 in) X Ø 260 mm( Ø 10.2362 in) X 40T(1.575 in) Plate square dimensions(standard) U 30 X 30/ L 40 X 40. Upper plate ring assembly weight: 80 kg(176.37 lbs) Stainless steel rings. Upper plate weight: 100 kg(220.462 lbs) Lower plate RPM: 0-60 RPM 60 Hz. Number of carriers: 5 pcs. Carrier specifications: DP=12 Z=134 PCD= Ø 283.6 Main drive motor: 5.5 kW Reclaim pump motor Slurry pump motor: 0.2 kW Air supply: 5-6 kg/cm 2 Machine net weight: 2.500 kg(5511.557 lbs) Machine dimensions: W)1.770 mm X(D)1,240 mm X(H)2,400 mm(W)5.81 ft X(D)4.07 ft X(H)7.87 ft) 1.935 ... morehours Has semi auto vehicle reclaim system. NOTE: This system separates solid waste particulates from the liquid vehicle. Includes slurry system. 2– 55 gallon drums. Crowns, separate pump& overflow float. Machine used to lap 4330 material shims Maximum lapping Ø 10” Currently not under power but can provide power Selling to make room for additional equipment NO ADDITIONAL COST to straight load onto flatbed. WILL SHIP(buyer responsible for all shipping and rigging costs) Shipping calculator may not be accurate.
48" SPEEDFAM 48KGPAW LAPPING/POLISHING MACHINE w/4 PNEUMATIC HOLD-DOWNS & RINGS
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 48" SPEEDFAM 48KGPAW LAPPING/POLISHING MACHINE w/4 PNEUMATIC HOLD-DOWNS& RINGS Ref# 151422 iammdna XLAPPG 48" SPEEDFAM LAPPING/POLISHING MACHINE MODEL: 48KGPAW S/N: 48KPGAW-1457 48" ... morePOLISHING PLATE PNEUMATIC LIFTS 4 RINGS* EXCELLENT CONDITION& APPEARANCE(ORIGINAL PAINT) PRESENTLY LOCATED IN OUR HARRISON. WAREHOUSE* Machine Location: HARRISON. NJ Click Here For More Speedfam Machines Click Here For More Lapping Machines- LAPPING MACHINES(s) Questions about this Machine? Call Andy at(800) 873-6224 ext 7600 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our eBay store are covered by a standard MDNA(Machinery Dealer's National Association) 30 day return privilege. Which means you can return an item you are dissatisfied with for a full refund. Please for complete details on how this works. New machines are covered under their own warrantees. Details of each warranty can be found within the quotation for all new machines. Most items in our store are located in our warehouse in Harrison. New Jersey- about 9 miles from New York City. You may inspect any item prior to purchase, under power in most cases, simply
32" Speedfam Model 32BTAW Free Abrasive Flat Lapping Machine - Lapper
1- used 32" Speedfam Model 32BTAW Lapping Machine. New approx. 1980. With 32" diameter segmented lapping plate, 4 conditioning rings(12" I.D. plus extra rings(geared type) water cooled lap plate, 4 air pressure hold downs, outside parts loading table, 5 H.P. main drive motor and controls, presently wired for 3/60/460 volts, cycle timer control, oil lubrication sight gauge, center reversing gear, push button controls, slurry pump& tank plus an extra slurry pump, and more. Machine was just pulled out of storage(time to sell it) from inside the shop, and needs a good thorough cleaning. Loading on to buyers' truck is free of charge. Freight expense is the buyers' responsibility. We can supply freight rates if needed. Preferred method of payment is company check or bank wire tranfer. Machine being sold as is where is ... moreF.O.B. truck. Will answer questions about condition, etc.
Speedfam 5B Double Sided Precision Polishers
Speedfam 5B Double Sided Precision Polisher 5" Carriers Cast and Iron Plates available VFD Motor control Auction is only for one machine Two are available in separate sales. I reserve the right to stop the auction at any time. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14888aa4ce2-0x112-
96" dia Speedfam Lapper Lapping Polisher optics grinding flat finishing spitfire
This auction is for an used 96” diameter Speedfam Lapper Polisher. It is a Model 96 BGW. Reportedly it was used for optics. Features: 40 hp varispeed motor; water cooled table; a bridge with 4- pneumatic pressure hold-down cylinders. This offer is for used equipment in“as is” condition. Hayward, CA 94568. California sales tax will be collected for a sale within the state. Seller will release item for shipment immediately upon receipt of payment. Buyer is responsible for all shipping arrangements& loading& shipping costs. We want a quick/speedy completion of the payment and pickup of this auction. Therefore. Payment is to be made by certified funds or wire transfer and must be received by seller within 3 working days of end of the auction and before shipment or this sale is canceled. Pickup is to be made within 10 working days of receipt ... moreof payment. Buyer is responsible for making all arrangements& costs for the packaging and transportation of this equipment. Please ask any questions well in advance of the end of this auction.
84" Speedfam Free Abrasive Precision Flat Lapping Machine - Lapper
1- used 84" Speedfam Lapping Machine. New in the early 1980's. Open face style. With a standard hardened steel segmented lapping plate(1-3/8" thick) 2 geared conditioning rings(32-1/2" I.D. center reversing gear, cycle timers, slurry feed unit, 25 H.P. main drive motor and controls. Machine is in good running condition. Only 2 of the 4 stations are being used. Selling because of downsizing the size machine needed is for smaller less volume parts. Rings have shoes underneath them so as to not wear out the rings, only the shoes, as the rings are very expensive to replace. The lap plate has plenty of life left, as a new plate is only 1-3/4" thick. Click on the following link to see a short video of the machine under power: Loading on to buyers' truck is free of charge. Freight is the buyers' expense. We can supply ... morefreight rates if needed. Sold as is where is. Additional photo's available on request. Preferred method of payment is company check or bank wire transfer. Subject to prio sale. Any other questions. Please let us know.
SPEEDFAM CHEK-FLAT FLATNESS MEASUREMENT UNIT 16"LONG X 6"WIDE X 7"TALL
SPEEDFAM CHEK-FLAT FLATNESS MEASUREMENT UNIT.0001 TO.100 16"LONG X 6"WIDE X 7"TALL
Vintage SPEEDFAM INTERNATIONAL Advertising GLOBE Silver Tone Metal PEN Holder
You are buying a vintage FAM Speedfam International Inc. silver tone metal advertising pen holder with globe. The base of the pen holder measures 4 1/8 inches by 2 1/4 inches. Pen holder measures 2 3/4 inches tall. Pen holder is in excellent condition with some light signs of wear on the globe which is made of plastic. See photos. If you have any further questions please feel free to ask! Make sure you check out our other advertising pieces! Combined shipping discounts! ANY REASONABLE OFFER WILL BE IMMEDIATELY ACCEPTED! BUYER HAS 5 DAYS TO PAY OR ITEM IS RELISTED AND AN UNPAID ITEM CASE WILL BE OPENED! THANK YOU FOR YOUR PROMPT PAYMENT! PLEASE NOTE: SHIPPING CHARGE ONLY COVERS POSTAGE. HANDLING, AND TRACKING NUMBER. IF YOU WOULD LIKE ANY ADDITIONAL USPS SERVICES PLEASE CONTACT US PRIOR TO MAKING PAYMENT SO WE CAN ADJUST THE INVOICE FOR THOSE ... moreSERVICES! THANK YOU!
SpeedFam-IPEC/Novellus 676 AvantGaard CMP System Polisher/Planer/Planarization
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Novellus/Westech/SpeedFam/IPEC AvantGaard 676 Chemical Mechanical Planarization System Polisher Comes with a manual. Some interconnecting cables, and what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Novellus and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. The system was removed from service in working condition and professional decontaminated however we are unable to test it. It is not in clean room packaging. It is sold as-is. The Polisher's Serial Number Tag Reads: Model Number: MP400 Serial Number: 3053 The Chase Panel's Serial Number Tag Reads: Model Number: 676 Serial Number: 3053 Power Requirements: 120/208 VAC WYE. 3 Phase, 60 Hz, 60 Amps Max. Items Included: Main ... morePolishing Unit Chase Control Panel Genmark Gencobot 3L/ 4 Robot with End-Effector Wafer Address Sensors. Model M-825(25 Wafer) The Unit Was Being Used with the Following Chemicals: Hydrogen Peroxide(7.4% to 50% concentration) Semi-Sperse W2000(DI Water and Proprietary Metal Oxide) Highlights: The AvantGaard 676 is capable of throughput of 40 or more wafers per hour and offers one of the industry's smallest footprints. These systems can be used to polish either oxide or metal layers. Allowing customers to reduce the number of different CMP systems in a wafer fabrication facility. IPEC's newest systems also are designed to improve yields by use of an orbital polishing motion rather than conventional rotational CMP techniques. IPEC's design strategy emphasizes higher levels of reliability and ease of use. Description: The SpeedFam-IPEC AvantGaard 676 Chemical Mechanical Planarization System is used during the semiconductor manufacturing process to planarize individual layers in complex integrated circuits to customer specific parameters. The system(Tool) has four wafer planarizers. An endpoint detection system, dual pad conditioning systems, a fully automated cassette t
25" Speedfam Model 9B/5L III Double Sided Lapping Machine
Liberty Machinery Company You are looking at: Used- 25" Speedfam Model 9B/5L III Double Sided Lapping Machine* Serial No. 9B-5L226547-776 New- 2001 LMC#36944 SPECIFICATIONS: Plate Diameter 24.8" Plate Diamter I.D. 9.52" Plate Thickness 1-3/16" Lower Plate Speed 7- 60 RPM Work Carrier Speed 6- 60 RPM Total Workload Area 92.7 Square Inches Upper and Lower Plate Drive Motors 3 HP Work Carrier Motor 3 HP Number of Workpiece Carriers 5 Work Carrier Usable Diameter 5.9" Workpiece Thickness- Minimum 0.005" Maximum 0.98" Height- Head Up 98" Electrical 208/3/60 Length x Width 66" x 44" Approximate Weight 3.748 Lbs. EQUIPPED WITH: Direct Read System/ Process Controller Timers for Three Pressure Settings Sony Model LH51-1 Digital Read-Out Drive System: The machining plates and work carrier drives are ... morevariable speed. Gear reduced, soft starting and electronically controlled. Rigid Machining Plate Support System Solid with Slurry Drain Holes Machining Plate Plumbed for Speedfam Slurry Tank and Pump Distributor with Manual and Automatic Controls*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will email additional photos as requested. Buyer is responsible for all freight and shipping costs. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up from our selling location within 21 days of"award of sale" Items remaining on our premises after 21 days will be subject to a warehousing charge of $25.00 per day. Hours of Operation Liberty Machinery Company's normal business hours are 8am
Speedfam-12B-Grinding-Lapping
SpeedFam free abrasive 12 inch lapper. Good condition, lap is flat, no dings, timer works, 4 rings(4.5"ID) 4 weights. Please e-mail me with any questions you might have. Thanks for looking, bid with confidence.
Speedfam 12B and 9B lapping and polishing machines
A group of Japan made SpeedFam lapping and polishing machines. 12B and 9Bs. Manufactory yearly maintained in good running condition need to sell. All equipment can be sold in one group of 7 for $90k or sell separately at $15k each.
Speedfam 16B double side polishers
High precision SpeedFam double side polishers. 2 systems. Excellent working condition.