In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
35.50
Buy It Now
$5.00 Shipping
Location: Huntsville, United States
Rockwell was one of the early silicon valley pioneers of semiconductor manufacture.
$
349.00
Buy It Now
$9.00 Shipping
Condition: New
Location: Cambridge, United States
New compact anode layer ion source designed to fit in a 2.75" conflat nipple. Compatible with hydrogen/deuterium and inert gasses. Ion Source disassembly ... morevideo. Ion Source Product Flyer. SmCo rare earth magnet allows high temperature bake out without disassembly.
$
250.00
Buy It Now
$15.07 Shipping
Condition: Used
Location: Linwood, United States
Inficon Crystal Interface Unit 757-302-G1 with cables. For use with Inficon Thin Film Deposition Monitors.
$
19999.00
Buy It Now
Condition: Used
Location: Boyers, United States
We have a used Vacuum Thin Film Deposition System. It does not have a mfg. tag on it. I suppose it did at one time. It comes with all you see in the photos. ... moreYou get one of the small vacuum pumps on the pallet you see in my picture of pumps. We purchased this system as well as 2 others from a Gov't research lab. I have the other 2 listed in other auctions. Reach out to ask questions. We don't know the history of them. Sold as is where is. You are welcome to come in and inspect. Thank you for looking. Mike Tenney - Tenney Equipment Company
$
19999.00
Buy It Now
Condition: Used
Location: Boyers, United States
We have a used Vacuum Thin Film Deposition System. It does not have a mfg. tag on it. I suppose it did at one time. It comes with all you see in the photos. ... moreInnotec E-Beam power supply EB-8 You get one of the small vacuum pumps on the pallet you see in my picture of pumps. We purchased this system as well as 2 others from a Gov't research lab. I have the other 2 listed in other auctions. Reach out to ask questions. We don't know the history of them. Sold as is where is. You are welcome to come in and inspect. Thank you for looking. Mike Tenney - Tenney Equipment Company
$
3950.00
Buy It Now
Condition: Used
Location: Freehold, United States
Deposition source with 4.5 in. OD conflat flange.
$
7995.00
Buy It Now
Condition: Used
Location: Austin, United States
(Nine (9) Very Good Condition 2” Sputter Targets (1/4” Thick: Cu-Copper, W-Tungsten, ITO-Indium Tin Oxide, Si-Silicon, Ti-Titanium, CuO-Cupric Oxide, ... moreZn-Zinc, Ti/Ta 95% Titanium / 5% Tantalum), Al-Aluminum).
$
2999.99
Buy It Now
Condition: For parts or not working
Location: Fishersville, United States
$
149500.00
Buy It Now
Condition: Used
Location: Santa Barbara, United States
It can be used for full-color device production, a difficult application for Solciet. It has a 7-sided transfer chamber, and can support 2 to 4 organic ... moredeposition chambers as needed. WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, OPENED OR DISASSEMBLED.
$
4227.00
Buy It Now
Condition: Used
Location: Freehold, United States
Item has shutter and deposition source.
$
900.00
Buy It Now
$37.95 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
$
11000.00
Buy It Now
Condition: For parts or not working
Location: Freehold, United States
There are 4 deposition sources in the chamber. The chamber also includes an Ulvac Cryopump and compressor. Chamber is being sold as is where is, we cannot ... moretest this item.
$
75.99
Buy It Now
$8.70 Shipping
Condition: Used
Location: Centuria, United States
$
895.00
Buy It Now
$14.00 Shipping
Condition: Used
Location: Sarasota, United States
High Vacuum Crystal Dual Head Feedthrough. That being said, we are not perfect, nor are we experts on anything.
$
2699.00
Buy It Now
$51.46 Shipping
Condition: New
Location: Carpinteria, United States
WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, OPENED OR DISASSEMBLED. WE HAVE SEVERAL WAREHOUSES. ALL CLAIMS MUST BE REPORTED AND ACKNOWLEDGED WITHIN ... more72 HRS OF RECEIPT. System was de-installed in working operational condition.
$
4900.00
Buy It Now
$399.79 Shipping
Condition: New
Location: Aurora, United States
Condition is New. All ports made of CF flanges except chamber front door sealed via dovetail groove & O-ring. Chamber Body Manufactured from 304 Stainless ... moreSteel Plates. Chamber top has two CF1.33” flanges for shutters & CF 2 ¾ “flange for motion.
$
45000.00
Buy It Now
Condition: For parts or not working
Location: Schenectady, United States
Model:Plasmalab 100. Process: PECVD & TEOS. Our facility includes a truck-height loading dock for convenience. Local pickup is also available. Ten Process ... moreGas Inputs with MFCs. CF4 80%, O2 20%--500 SCCM---MKS 1179A.
$
600.00
Buy It Now
$17.23 Shipping
Condition: Used
Location: Linwood, United States
Inficon XTM/2 Thin Film Deposition Monitor 758-500-G1 with Crystal Interface Unit 757-302-G1.
$
389.99
Buy It Now
Condition: For parts or not working
Location: Chicago, United States
$
249.00
Buy It Now
Free Shipping
Condition: Used
Location: Austin, United States
$
260.00
Buy It Now
$13.35 Shipping
Condition: Used
Location: Saint Peters, United States
$
9603.00
Buy It Now
$700.00 Shipping
Condition: Used
Location: Ventura, United States
Click here to see description.
$
7225.00
Buy It Now
$55.94 Shipping
Condition: Used
Location: Bosque Farms, United States
We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing ... morepurposes only unless it is attached or stated that it will be included.
$
11000.00
Buy It Now
Condition: For parts or not working
Location: Freehold, United States
There are 10 deposition sources in the chamber. This chamber was designated Organic Chamber. The chamber also includes an Ulvac Cryopump and compressor. ... moreChamber is being sold as is where is, we cannot test this item.
$
4950.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
$
14999.00
Buy It Now
Condition: Used
Location: Boyers, United States
We have a used Vacuum Thin Film Deposition System. It does not have a mfg. tag on it. I suppose it did at one time. It comes with all you see in the photos. ... moreYou get one of the small vacuum pumps on the pallet you see in my picture of pumps. We purchased this system as well as 2 others from a Gov't research lab. I have the other 2 listed in other auctions. Reach out to ask questions. We don't know the history of them. Sold as is where is. You are welcome to come in and inspect. Thank you for looking. Mike Tenney - Tenney Equipment Company
$
550.00
Buy It Now
$37.95 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
$
1779.68
Buy It Now
$750.00 Shipping
Condition: For parts or not working
Location: Rancho Cordova, United States
Unit powered on, but there was no response from the unit. for this reason, we are selling the unit AS-IS for parts/repair as a non-working or incomplete ... moreunit. We have not tested / inspected any further, item may have unknown issues we are not aware of. Item does appear to have missing parts/components, please review pictures closely. See all item photos for the condition of the unit. Unit includes CHA Industries Auto-Tech II as pictured, nothing else included. Unless pictured, no power adapter / power cable included The unit is on hand and ready to ship.
$
395.00
Buy It Now
Free Shipping
Condition: Used
Location: Des Moines, United States
$
199.99
Buy It Now
$32.00 Shipping
Condition: Used
Location: Milton Freewater, United States
Manufacturer: Leybold, Part Number: N/A, Model: XTM/2, Notes: Sold as-is. As pictured. Includes no additional cables. Cards or accessories beyond what ... moreis pictured. If you need any further information about this item. Please ask any questions prior to purchase. ims.27850 loc.19-B
$
399.99
Buy It Now
$28.00 Shipping
Condition: Used
Location: Milton Freewater, United States
$
1450.00
Buy It Now
$69.25 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
No remote pendant.
$
5250.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
Features of the Emitech K550X Sputter Coater Even and repeatable thickness deposition.
$
2000.00
Buy It Now
$38.49 Shipping
Condition: Used
Location: Lake Worth, United States
$
120.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Cleveland, United States
$
9000.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
Laboratory size self-contained thermal evaporator. Single thermal source.
$
500.00
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Applied Materials 0021-18960 REV 008 DEPOSITION RING Applied Materials PN: 0021-18960 REV 008 DEPOSITION RING
$
4999.00
Buy It Now
Condition: Used
Location: Danville, United States
Small Plasma CVD system. Nice wide vacuum chamber with a water cooled copper antennae coil. Whole system is setup for 220V 1 phase.
$
350.00
Buy It Now
$24.75 Shipping
Condition: Used
Location: Saint Petersburg, United States
Not 100% sure what this guy is. it looks like it's used to bring cryogenic temp gasses into the chamber.
$
495.00
Buy It Now
Free Shipping
Condition: Used
Location: Des Moines, United States
$
79000.00
Buy It Now
Condition: Used
Location: San Diego, United States
This custom designed and built sputtering system allows multiple horizontally oriented sputtering sources (8 or more) installed on the vacuum chamber ... morefor various sputtering applications. The system can be used for other purposes which may need an enclosed space in vacuum or gas ambient.
$
21910.90
Buy It Now
$1200.00 Shipping
Condition: Used
Location: Ventura, United States
Click here to see description.
$
7225.00
Buy It Now
$55.94 Shipping
Condition: Used
Location: Bosque Farms, United States
We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing ... morepurposes only unless it is attached or stated that it will be included.
$
500.00
Buy It Now
$96.65 Shipping
Condition: Used
Location: Carpinteria, United States
ALL CLAIMS MUST BE REPORTED AND ACKNOWLEDGED WITHIN 72 HRS OF RECEIPT. WE HAVE SEVERAL WAREHOUSES. WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, ... moreOPENED OR DISASSEMBLED. IF THERE ARE ANY PROBLEMS WITH THE ITEM DO NOT TRY TO REPAIR AND INVESTIGATE.
$
5500.00
Buy It Now
$59.89 Shipping
Condition: New
Location: Saint Petersburg, United States
$
5999.99
Buy It Now
Condition: For parts or not working
Location: Phoenix, United States
The Semi Group CVD 1000 MPB Plasma Enhanced Chemical Vapor Deposition System (PECVD). Model Number: CVD SYSTEM 1000 MPB. Zellweger Hydrides Exhaust Gas ... moreMonitor. Up to 8 Gas Inputs (6 MKS MFC's included).
$
125.00
Buy It Now
$4.00 Shipping
Location: Huntsville, United States
These are 6500 series microprocessors on an uncut silicon wafer as pictured. The 6502 of course was famously used in the first Apple computers and Commodore ... morecomputers. This 6512 is one of many variants of the 6502 that Rockwell built throughout the 1980s.
$
266.79
Buy It Now
$13.60 Shipping
Condition: Used
Location: Centuria, United States
$
22470.08
Buy It Now
$450.00 Shipping
Condition: Used
Location: Cedar City, United States
AMAT 7800 is a reactive-ion plasmachemical-vacuum deposition tool. It is designed to deposit high-quality films and structures, as well as the etching ... moreof features. It has a wide range of process gas options which can be introduced into the chamber in order to help produce an array of films, including oxides and other high dielectric materials.
$
449.88
Buy It Now
$13.60 Shipping
Condition: Used
Location: Centuria, United States
$
1299.90
Buy It Now
Free Shipping
Condition: Used
Location: 구로구, South Korea
(Manufacturer : INFICON. It was removed from machine of old working condition. Just power on tested. Sold as is.). If You Want.
$
394.68
Buy It Now
$13.60 Shipping
Condition: Used
Location: Centuria, United States
$
115000.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
Capable of sequential and simultaneous deposition of up to two targets at once. Substrates are loaded automatically by the load lock robot. Manual operation ... morealso available. RF Plasma Cleaning for conditioning substrates prior to deposition.
$
195.00
Buy It Now
Free Shipping
Condition: New
Location: Newport Beach, United States
AMAT Applied Materials Deposition Ring SMF/JMF 6" Aluminum 6AL-4V TI High AR HTESC. Note: Multi-Quantity are avail, pictures show one of the actual units, ... moreall are in similar conditions.
$
500.00
Buy It Now
Free Shipping
Condition: New
Location: Austin, United States
Accessories are not included. In certain cases we will work with you, depending on the situation. -You save on surplus products. -We recover surplus parts. ... more-We recycle surplus electronics products. We also provide surplus Industrial parts and products.
$
330.09
Buy It Now
$40.00 Shipping
Condition: Used
Location: Monroeville, United States
Inficon XTM/2 Thin Film Deposition Monitor & oscillator 
$
11000.00
Buy It Now
$189.89 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
If need be power supplies are available for this source.
$
750.00
Buy It Now
$17.61 Shipping
Condition: Used
Location: Ventura, United States
$
150.00
Buy It Now
$18.40 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
$
425.25
Buy It Now
$12.16 Shipping
Condition: New – Open box
Location: Buda, United States
REQUIRED BY US LAW. Two-zero-eight-nine-eight-two-one-eight-six-two Direct Line. Nicole Jackson at getsparesllc. We do repairs. (See Hours of Operation, ... moreabove). Zhòngyào de! Rúguǒ méiyǒu zhèxiē xìnxī, tā jiāng bèi hǎiguān kùn zhù.
1 2 3 4 5 6 7 8 9
 In 

Former Listings  
 
Deposition by Gheeraert David Painting Art Frick Collection Postcard 5844
Vintage Postcard Please see front and back scans of this postcard for close up view of condition. USA Shipping- 1.50 for the 1st postcard. Each additional card will ship for free when paid for at the same time. International Shipping- 1.50. 25 each additional card when paid for at the same time. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fv%7F.rpn31%3E-13d3aecc79f-0x103-
Deposition 12.3.1864 Enos Adams Bennington VT , Troy NY County Seal 2 IR Stamps
This Auction is for: 1- Deposition in the Citation of Stewart vs Enos Adams as pictured. Some photo's some scans. Business dispute. References made to 1858 and 1859- deposition taken in Troy, NY on December 3, 1864, for the case to be heard in Bennington, VT. Document is approximately 13.5" High by 8.25" Wide. 2 stamps- IRS 0.05(Scott US R25c) cent Express Tax Stamps attached- pen cancellations. Pinhole size small separations at the fold intersections- inconsequential. Very Good crisp firm paper. Impressed in paper Rensselaer County Seal. Wax glued attachments Questions are WELCOME. Supersize the pictures to see the quality& condition of this offer. We are including scans as well. This item c ame from a smoke free environment. Seller is a Member of the American Philatelic Society and the British North American Philatelic ... moreSociety. Note- we combine shipping. With Philatelic items the shipping rate for one item often remains the same when multiple items are added in the same shipment. We do all we can to reduce your cost- please visit our store to see if there are items you would like to add. When shipping we use postage stamps from years past- you will enjoy those as well. Please see our combined shipping information below. We combine Shipping for auctions won within 3 days of each other- if you win an item and are bidding on other items please let us know. Send us a request to adjust the invoice for multiple items won and please do not pay until you receive the adjusted invoice. We are proud to bring you these items- please VISIT OUR STORE check our other fine auctions and Buy It Now opportunities. Your satisfaction is our promise. We accept PayPal. Our Value Promises- w e give you: Quality Products. Accurate descriptions. Fair pricing. Combined Shipping. Rapid response to your concerns. International Buyers are WELCOME- we combine shipping. Please contact us for shipping rate prior to bidding. We fill out Customs Forms with the facts and comply with the law. Buyers are responsible for all Custom
ANTIGUA 533 (SG608) - "The Deposition" (pa14959)
COMMONWEALTH of ANTIGUA March 15. 1979 Easter"Durer Paintings" Issue"The Deposition from the Cross" Ten Cents Multicoloured White Wove Unwtmk Paper Perforated 14.0 x 14.0 Lithography Printing Questa Security Printers. London_ Scott 2010 Catalogue: Antigua 533($ 0.20 US) Stanley Gibbons: Antigua 608 Very Fine Black CDS Cancel ANTIGUA PTTS pa14959.jpg_ The PERFORATONS NETWORK OTTAWA CANADA Powered by 345e.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60%60%3E345e-13d43b25abc-0xf5-
12.5" ID 14.5" deep chamber set up for CVD vacuum deposition with gas shower
This auction is for a CVD deposition chamber. The top port is ISO 320- I have adapters that will take this to 8" conflat if you prefer. The bottom port is ISO 250 and is extra thick to allow drilling for sample stage fixturing. The chamber has(2) ISO 100. 2) KF 50 and(2) KF 40 accessory ports. There is a 5 1/4" by 1" rectangular port with load lock for sample entry. Gas shower ID is 8" and is plumbed to a single 1/4" VCR port on the outside of the chamber. This unit can be UPSed in 2 boxes but the ebay shipping wizard is not configured for that. I have set the shipping to freight and will pack and ship via ups for actual cost.
Magnetron Cathode for Thin Film Deposition using DC Power Supply
You are bidding on a magnetron cathode with 42R5BFPP motor. It weighs about 95 lbs and will be shipped in a 20x20x20 box. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. Our preferred carrier is FedEx. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
Flow Technologies Ceres SL4 ALD deposition system. Fully functioning
This system was built for a cost of over 3 Million dollars and used for research. Item is fully functional in a clean room and can be inspected. Please contact for inspection. The tool can handle 200mm wafers or 150mm wafers using ceramic wafer carriers. There are two rapid thermal processing(RTP) units that can be used for pulsed atomic layer deposition or continuous gas flow. They are capable of vacuums down to 1 x10-8 torr provided by magnetically levitated turbo pumps backed by a common roughing pump. And temperatures up to 750°C. The RTP's can process up to 4 different gasses using pulsed flow or continuous flow supplied from the gas delivery cabinet that can supply the gas from buffer boxes at pressures from 0.1 torr to 200 torr. The RTP's can process an infinite amount of easily configurable recipes that control multiple ... morecycles of temperature. Gas pulses, gas selection, hold and anneals process segments. For example, one RTP can be used to pulse Tri-Methyl Aluminum and the other water to make single crystal Al2O3 dielectric or both gasses can be fed to the same chamber to make the oxide and two wafers can be processed simultaneously, one in each RTP, at different process conditions. The wafer temperature is measured by both a thermocouple up to 700°C and pyrometers up to the max temperature. The heater is lowered to accelerate heating rate and raised to accelerate cooling. The MBE unit has an E-gun for evaporating material from 4 different recipe selectable pocket crucibles and is capable of temperatures up to 900°C and vacuums as low as 1 x 10-8 torr. The unit controls the operation of three shutters. The source shutter to prevent excess evaporation into the chamber during idle periods, the substrate shutter to prevent deposition on the substrate during crucible heat up and a shutter on a deposition rate crystal to shield the crystal from continuous deposition to extend its life. The E-gun can be controlled in several automated levels including full deposition rate control using the
Semiconductor Production Wafer w/9 Processed Layers-Oxidation,Deposition,Etch
Here we have a very nice Semiconductor Production Wafer that is in great condition. The wafer has been processed with Layers of Oxidation.Metal Deposition,and Etch. Thank you. Normal 0 Normal 0 Normal 0
INFICON Model 321 Film Thickness Monitor for Vacuum Deposition
Description: INFICON Model 321 Film Thickness Monitor for Vacuum Deposition This item has been in inventory storage for some time. It has been declared surplus so it is being offered at a bargain price. It was tested by power up and to demonstrate that the controls work. We do not have the capability to perform additional tests so the item is sold as is. TERMS And Conditions WE WISH TO MAKE CLEAR TO POTENTIAL BUYERS THAT ALL ITEMS. NEW AND USED, ARE SOLD AS/IS. We do our best to describe each item accurately, pointing out any known flaws. It is the responsibility of the buyer to thoroughly read the description and to look at all the pictures. We welcome any and all questions and will try to RESPOND CLEARLY AND PROMPTLY. Ultimately, we want our buyers to be educated and HAPPY with their purchase(s) ACCEPTED PAYMENT METHODS: per ebay rules. ... moreWe only accept PayPal payments. for some items. We will allow local pick-up. Please inquire. CASH ONLY for local pick-up. PAYMENT MUST BE MADE WITHIN FIVE(5) DAYS AFTER THE END OF AUCTION OR SALE. WE RESERVE THE RIGHT TO REFUND PAYMENTS FROM CUSTOMERS THAT ARE NOT COVERED BY THE PAYPAL SELLER PROTECTION POLICY. CONFIRMED ADDRESSES ONLY. PLEASE INQUIRE IF YOU HAVE ANY QUESTIONS. SHIPPING DETAILS for u.s. shipping we use either fedex ground or usps. WE WILL ONLY SHIP TO THE ADDRESS LISTED ON THE PAYPAL PAYMENT PAGE. our u.s. FLAT SHIPPING RATES ONLY APPLY TO THE 48 CONTIGUOUS STATES. Additional rates may apply to PO boxes. Hawaii and alaska. PLEASE INQUIRE if the actual shipping/handling cost is less than the quoted price in the listing. We will refund the difference. we are not in the business of trying to profit from excessive shipping charges. international shipping is usps international express. USPS International priority or fedex. PLEASE INQU
INFICON Guardian™ Co-Deposition Control System EIES-4
Normal 0 false false false EN-US KO X-NONE Guardian ™ Co-Deposition Controller Simultaneous Deposition of Up to Eight Materials Ideal for CIGS Thin Films Guardian can control deposition rates from 0.1 to 10.000 Å/s. It operates one or two sensors, up to 8 optical inputs and controls up to 8 deposition sources, enabling co-deposition of up to 8 materials. INFICON Guardian is ideal for applications such as fabrication of photovoltaic modules. OLEDs, photovoltaics, superconducting thin films and MBE. The Guardian Co-Deposition System is based on Electron Impact Emission Spectroscopy(EIES) Features at a Glance Monitor and control simultaneous deposition of up to 8 materials Deposition rates from 0.1 to 10.000 Å/s Integrated EIES and QCM thin film process control 12 relay outputs and 16 digital inputs Windows-based software for setup ... moreand operation Compatible with INFICON Sentinel® sensors Normal 0 false false false EN-US KO X-NONE
PVI STAINLESS STEEL HIGH VACUUM CHAMBER CHEMICAL VAPOR SPUTTERING DEPOSITION
PVI STAINLESS STEEL HIGH VACUUM CHAMBER IN LINE CHEMICAL VAPOR SPUTTERING DEPOSITION A local company contracted out the construction of this item to PVI System Technology. Of Oxnard, California. PVI is a System Engineering& Manufacturing company specializing in High Vacuum and Thermal Process Technologies. Since 1981. PVI Engineers& Technical Staff have successfully designed& manufactured a wide variety of Automated Vacuum Processing Systems for the Photovoltaic, Flat Panel Display, Semiconductor, Aerospace, High Purity Material& other challenging industries. Background/ History. This unit is one of eight(8) main components that comprised a very sophistocated Chemical Vapor Sputtering Deposition Process Line. Which previous owners engineered, designed and had custom fabricated for them. PVI System Technology was the company ... morecontracted to manufacture these main line of components. Previous owners went into great detail when explaining to us how much time. Money and tedious effort went into this project of theirs, not to mention the remarkable fact that this this Deposition Line, once completed, never saw more than FOUR HOURS OF TOTAL USAGE in production! The specifics and technical terminology was actually"Greek" to us lamen, but we got the jist of just how elaborate and involved this whole set-up actually was after researching much of the other components in the line. Fortunately, for the prospective bidders out there in eBay land who might be in the market for some of these components, this short-lived Deposition Line has been dismantled for individual resale of its MANY components. As with all the other components that came off of this line. The general, overall condition of this item clearly does reflect the previous owner's claim of VERY low usage to be quite accurate. Features And Specifications: Overall Dimensions- 10 5/8" x 25 1/4" x 37 1/2" long. Internal Conveyor Chamber measures 7 1/2" x 22" Chain Drive Roller/ Conveyor Assemblies introduced Glass S
Inficon Thin Film Deposition Manual Power Controller 755-262-G1
This Sale is for a Inficon Thin Film Deposition Manual Power Controller 755-262-G1. A hand-held unit that allows remote control of deposition power levels while the controller is in manual mode. The hand-held power controller plugs into the control unit front panel. Compatible with Cygnus 2. IC6, XTC/3, IC/5, Cygnus. Hand-held Power Controller: Part Number– 755-262-G1 CLICK HERE for additional information SOLD WITH A 14 DAY RIGHT OF INSPECTION Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" INTERNATIONAL BIDDERS SHIPPING COST NOTICE: Please request a shipping quote directly from us. EBay's shipping calculator may be quoting incorrect rates. Please email us for a discounted shipping quote prior to bidding on an item. Our office hours are 9-5 M-F Eastern Standard Time. U.S. Terms& Conditions Emails Please ... moreuse Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration to all parties. Answering Questions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However. USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via DHL or Federal Express. We will pass along our substantial DHL or Federal Express discou
Pelco 9500 PAC-1 Advanced Coater Vacuum Deposition
You are bidding on a Pelco 9500 PAC-1 Advanced Coater. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. We accept returns if specified in the Return Policy otherwise they are sold as is with no return. We will refund or exchange an item after it is returned and the shipping paid by the buyer. We ship using FedEx. UPS or other requested agents but not the USPS. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
Balzers BAK 550 Vacuum Deposition Chamber, Serial # 2166
You are bidding on a Balzers BAK 550 chamber. Serial# 2166. This is a bare chamber with no pumps. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. Our preferred carrier is FedEx. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
NRC Varian 703 Thermal Vacuum Deposition System
You are bidding on a NRC Varian thermal vacuum deposition system which is being sold as is. As pictured. Weight: 1.200 lbs. Shipping dimensions: 48" x 78" x 60" 18" x 26" stainless steel bell jar with 4" view port, 110V hoist, Stainless steel base plate with: 2 current feedthroughs, 2 rotary motion feedthroughs, 13 1 inch ports total with half blanked off, 6" ASA gate valve with integrated liquid nitrogen trap, Transformer, Click on images for a larger view. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. Our preferred carrier is FedEx. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
Denton Desk 1 Sputtering Coating System for Gold and Graphite, Quick Deposition
Denton Desk 1 Sputtering Coating System. For Gold and Graphite(Carbon) Quick Deposition, Mounted on Vintage Veeco“Leak Check System” which is used as a pumping station. System is sold without Argon gas cylinder installation. Which is shown in the pictures. L172) This unit was powered up and appears to be in good operational condition. However. We have not fully tested the unit and it is sold as is. Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different ... moreresearch and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these crite
SPI SPUTTER THIN FILM SPUTTERING DEPOSITION SYSTEM
SPI SPUTTER THIN FILM SPUTTERING DEPOSITION SYSTEM Description: Thank you for your interest! We are auctioning off this SPI SPUTTER THIN FILM SPUTTERING DEPOSITION SYSTEM. Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. COMES AS SHOWN! Doesnt power up. Some cosmetic wear. Sold as is for parts or repair. Very high cost unit~ 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient ... morein the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's responsibility to understand that the terms of the auction. The nature of equipment offered and bid accordingly. Shipping: BUYER TO PAY SHIPPING IN THE US. Alaska& Hawaii will be more! INTERNATIONAL BIDDERS WELCOMED-PLEASE CONTACT US FOR ACCURATE SHIPPING CHARGES Payment: Gladly accept most forms of payment including paypal click to Enlarge click to Enlarge inkfrog terapeak. I000000. InkFrog Analytics.
Varian NRC 3117 E-beam Deposition Thermal Evaporator Temescal Multi-Pocket E-Gun
Varian NRC 3117 E-beam Deposition Thermal Evaporator Temescal Multi-Pocket E-Gun Description Varian NRC 3117 Ebeam Deposition System Thermal Evaporator with Temescal E-Gun 18" Dia x 30" Tall Pyrex Bell Jar w/Implosion Cage 20" Dia Baseplate w/Hoist Leybold Heraeus Turbotronic NT 150/360(P/N 85472-1) Controller Leybold Heraeus Turbovac 150 Vacuum Pump Temescal Multi-Pocket E-Beam Gun Varian Cryostack-8 Briscoe MFG Co. Brisk Heat Heater Model VRN211-001 Varian Ionization Gauge 0563-K2466-305 RD Mathis ATD GRS E/O Device K333 Tune/Couple Control Edwards E2 High Vacuum Two Stage Pump Model E2M8 Tested turbo pump and found it to be in good working condition Manufacturer Varian Manufacturer Part Number NRC 3117 Item/Ship Weight 1075 LBS Tech Condition This item has not been fully tested and is being sold as is. Tested turbo pump ... moreand found it to be in good working condition This item was deinstalled from a high-end research facility and components appear to be in good condition. However. It has not been fully tested. The unit is without compressor and Ebeam power supply. If you have any questions please call(805) 648-3300. It can be previewed at our facility in Ventura, CA during business hours 8am to 5pm M-F. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 16250 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the ship
Leybold Inficon IC-6000 3U Thin-Film Vacuum Deposition Controller w/Card Modules
Search our eBay Store! Leybold Inficon IC-6000 3U Thin-Film Vacuum Deposition Controller w/Card Modules SKU: JV-THE-C-INFIC6000IC Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Leybold Inficon IC-6000 3U Thin-Film Vacuum Deposition Controller with Card Modules. Model: 013-075. Type: IC-6000. Physical Condition: Good- Scuff marks. Residue, and scrapes on unit. Minor nicks can be found throughout the unit. Most of the scratches can be found on the top panel. 2E3” is written on the top panel. The display screen has a few noticeable scratches but visibility is not hindered. Signs of rust can be seen ... moreon the screws and throughout the unit. Unit is missing a few card module lid cover. Back ports and control panel is in good condition. Functionality/Degree of Testing: Unit powers on with working display. All testable buttons are responsive. During our initial testing. The words: power failure” appeared on the screen, however, everything else was responsive. When we tested the unit again those words did not appear on screen. We do not have the necessary resources to further test this unit. Power cable is not included. Dimensions(L" W" H" 18 ½ x 19 x 5 ¼. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by
1863 2nd Iowa Cavalry missing pistols written court deposition document
i000000. 1863 2nd Iowa Cavalry missing pistols written court deposition document. THIS IS AN ORIGINAL 3 PAGE WRITTEN MILITARY COURT DEPOSITION FOR MISSING REVOLVERS IN THE 2ND IOWA CAVALRY MOST LIKELY TAKEN BY L. FRANCIS STODDARD AS THESE DOCUMENT CAME WITH HIS PERSONAL EFFECTS. I TRANSCRIBED IT FOR EASIER READING. inkfrog terapeak. InkFrog Analytics.
Sycon Instruments STC-200/SQ Deposition Rate Controller
You are bidding on a Sycon Instruments Deposition Rate Controller. It is currently installed on a vacuum system so let us know if there are ancillary items you may need. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. We accept returns if specified in the Return Policy otherwise they are sold as is with no return. We will refund or exchange an item after it is returned and the shipping paid by the buyer. We ship using FedEx. UPS or other requested agents but not the USPS. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
Inficon EIES-IV Guardian Deposition Rate Controller
You are bidding on an Inficon deposition rate controller. It powers up and will be backed by a 90 day warranty. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. We accept returns if specified in the Return Policy otherwise they are sold as is with no return. We will refund or exchange an item after it is returned and the shipping paid by the buyer. We ship using FedEx. UPS or other requested agents but not the USPS. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
"The Deposition of Christ" Bronze Wall Bas Relief Religious crucifixion Church
bronze_deal"The Deposition of Christ" Bronze Wall Bas Relief Religious crucifixion Church Condition: This sculpture is in perfect condition. Bronze Dimensions:Height 16" X Width 8" Weight:10 LBS Inventory: 34XNBR0115543 An awe-inspiring sculpture of"The Descent from the Cross" also known as"The Deposition of Christ. Taken from the account of John 19:38-42. Joseph of Arithmea and Nicodemus as well as other followers of Christ remove Jesus' body from the cross upon his pronounced death. As his body is lifted off the cross by the hands of adoration and devotion gently carry his body. Saint Mary, his mother, mourns at the bottom. The background of the sculpture show swirls of clouds. This is a spiritual and beautiful piece designed with care using the lost wax method. It is a wall plaque, perfect for rooms ... moreand hallways. The piece is signed by the artist Jean Patoue. The process of bringing a bronze sculpture to life using the lost-wax method is something you'll appreciate after taking this tour- Enjoy. Here Artist original clay sculpture is nearly ready for the foundry. Note the artist is still adding the finishing touches. Most sculptors prefer to work with clay or wax; some however. Do use wood and other mediums. Here the finished original clay is now complete. The sculptor will take it to the foundry now, get a bid then begin the first stages of the lost wax process. The first step can be shocking for some as they begin to decide how this original will be cut up. In order to prepare the original clay sculpture for molding. It will be dissected by cutting the clay with wire and by cutting the armature with a saw. The armature is what helped support the clay in place while the artist was creating it. Note the registration marks which later in the process will serve to realign the parts. Shown here are the sections of the original clay sculpture after having been dissected. Now the various parts of the original are carefully mounted on clay plugs before the rubber mold mater
Airco Temescal CV-8-110 Electron Beam Vacuum Deposition Power Supply XYS-8 Sweep
Airco Temescal CV-8-110 Electron Beam Vacuum Deposition Power Supply XYS-8 Sweep Description Airco Temescal CV-8-110 Electron Beam Vacuum Deposition Power Supply with XYS-8 Sweep Control This item requires freight shipping. Please contact us for a quote prior to purchasing. Manufacturer Airco Temescal Manufacturer Part Number CV-8-110 Item/Ship Weight 810 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory ... moreor part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item may require palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 44803 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qual
PVD Products PLD/MBE-2300 Pulsed Laser Deposition System Wafer Sputtering Yr2010
PVD Products PLD/MBE-2300 Pulsed Laser Deposition System Year: 2010 Sells for $675.000.00 plus Used Condition: Excellent condition. If you looked at the item. You would think it is new. The system was ordered in Aug. 201 0 and shipp ed in Dec. 201 0. Ge neral Description: PVD Products PLD/MBE-2300 system provides a field proven laser deposition system that allows the end user to deposit films in several modes such as monolayer-by-monolayer. Multi-layers, and combinatorial mode. The system includes an oxygen compatible substrate heater that provides actual substrate temperatures of 950°C for silicon and other non-transparent substrates. And 850°C for transparent substrates such as sapphire or LaAlO3 without the need for silver paste. A large programmable Zstage provides variable target-tosubstrate distances. Ports are provided for ... morea dual wafer loadlock. HP RHEED, optical spectroscopy. Substrate and target viewing. And three ports for the addition of magnetron sputter sources, ion or atom sources or effusion cells. This system also includes PVD Products unique Intelligent Window that keeps the optical beam path clean for extended periods of time and provides a mechanism to measure the energy that has entered the deposition chamber. Our optical beam path is completely enclosed for safety and includes the ability to raster the laser beam across the 2-inch diameter target to enhance film uniformity. The systems come equipped with a Pfeiffer HiPace 700 l/sec turbo pump backed by an Edwards XDS-10 dry scroll pump. A complete set of vacuum gauges is provided. Including a capacitance manometer that provides closed-loop pressure control from 1 to over 500 mTorr. The PLD/MBE-2300 can be integrated with all COMPex Excimer lasers. System Specifications: Substrate Size: 2 inch diameter maximum or multiple small substrates(ex. 4 x 1 cm2) Number of Targets: Six(6) 2 inch diameter or smaller with optional inserts Maximum Substrate Temperature: 950°C for silicon. 850°C for transparent substrates(no silver paste
Trion Oracle Plasma Etch & Deposition System
Trion Oracle Plasma Etch& Deposition System Description Trion Oracle Plasma Etch& Deposition System Varian Turbo-V 300 ICE MacroTorr Turbo Pumps Varian MoniTorr Transducer and Controller MKS Type 153 Control Valve Trion Gas Cabinets with Control Valves Trion Computer with controller cards This item requires freight shipping. Please contact us for a quote prior to purchasing. Manufacturer Trion Manufacturer Part Number Oracle Item/Ship Weight 1530 LBS Tech Condition This item has not been fully tested and is being sold as is. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the ... moreexact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 43734 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The c
Airco Temescal Model CV-8 Electron Beam Vacuum Deposition Power Supply
Up for sale is an Airco Temescal Model CV-8 Electron Beam Vacuum Deposition Power Supply. As you can see from the pictures. This system is in nice, clean condition with minimal wear. This unit was recently removed from a university lab but, because I lack the wiring to plug this unit in, I have not been able to test it, sold"As-is" LOW opening bid, don't miss out! Feel free to email me with any questions. Thanks for looking and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Inficon XTM/2 Deposition Monitor
This is a used XTM/2 crystal deposition monitor. It has a shutter control swith on the front pane.It includes power cable only. It has been tested and does work.
Ultek Evaporator Deposition System NRC 2.5 KV and Ultek 3.5 KV Power Supply
Ultek Evaporator Deposition System NRC 2.5 KV and Ultek 3.5 KV Power Supply Description Varian Evaporator Deposition System NRC 2.5 KV and Ultek 3.5 KV Power Supply Chamber Height: 35" Includes NRC 1901 2.500 Watt High Voltage Power Supply, Includes Ultek Filament Control Model 60-305-R, Includes Granville-Phillips 270 Gauge Controller, Includes Ultek 3KVA Power Supply Model 60-305, Includes Sycon STC-200 Deposition Rate Controller, Includes Varian Automatic Valve Controller, This item requires freight shipping. Please contact us for a quote prior to purchasing. Manufacturer Ultek Manufacturer Part Number Evaporator Item/Ship Weight 1388 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If ... moreyou have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item may require palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 44783 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from al
(3) mks MFC mass flow controllers for CVD diamond deposition system H2 CH4 O2
This auction is for a set of three mks MFCs that were part of a CVD diamond deposition system. H2 CH4 and O2 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e9f956db8-0x100-
Stainless steel dome for 20 samples, 2” diameter vacuum deposition L455
A stainless steel 11” vacuum holder dome for vacuum depositions of 20 samples. 2” diameter each(L455) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. ... morePlease ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these criteria is not met, we reserve the right to withhold funds for an indefinite term until all requirements are met. If you feel that you have received an incorrect item, please retain the item and all packaging materials and notify us ASAP. A Returned Merchandise Authorization(RMA) is required for all retur
CHA SS-600-RAP Thermal Vacuum Deposition System
You are bidding on a CHA thermal vacuum deposition system which is being sold as is. As pictured. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. Our preferred carrier is FedEx. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
Infinicon / Leybold-Heraeus XTM Thin Film Deposition Monitor
Infinicon/ Leybold-Heraeus XTM Thin Film Deposition Monitor Infinicon/ Leybold Thin Film Deposition Monitor Model: XTM Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used- Untested. We did plug it in and it powers on fine. No further testing was done. Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Shipping Info: Shipping weight is 10 lbs. Shipped from the Los Angeles area. zip 90221) Default Shipping Service: UPS Ground California residents will be charged 9.00% sales tax. Tennessee residents will be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment sent anywhere ... morein ether state. We accept the following methods of payment: Call 1.800.421.2442 to pay via. credit card over the phone. For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/rejected from your country for any reason. We are happy to refund the cost of the item only, less any eBay fees and shipping costs. If you still want the item
Kronos Deposition Rate Indicator & Quartz Crystal Film Thickness Monitor
Kronos Deposition Rate Indicator and Film Thickness Monitors Includes: Two Each Deposition Rate Indicators: Model R1-100 Two Each Quartz Crystal Film Thickness Monitors: Model QM311 Systems are clean and in good condition. What is here is what is being sold. No ability to test so are sold As Is. Seller was told they were operational when we purchased the units but have no way to verify. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13eb1b62d95-0xff-
Sigma Instruments SQM-160 Thickness/Deposition Monitor
Sigma Instruments SQM-160 Thickness/Deposition Monitor For sale- a. Well, it depends on which side of it you are looking at. From the front it is a TORR International. Inc. FTM-2000. On the back it says that it was manufactured by Sigma Instruments Model SQM-160. I think the explanation is that Sigma made the thing and put TORR’s name on it so that they could sell it as part of their CRC-150 Compact Research Coater system. Either way it is a thickness/deposition monitor. There isn’t much info on the TORR FTM-2000 available on the net. But it’s easy to find the Sigma SQM-160. Including as an option for the Denton DV-502B High Vacuum Evaporator. I have bought and sold a couple of Denton 502’s. So I know that is a fairly common lab fixture for thin film deposition. Denton lists the SQM-160 as being a $6.483.75 option. New of course. But still, ... moreover $6K. This thing is in excellent physical condition with one exception. The shaft of the single rotary control is slightly bent. It doesn’t appear to affect the operation of the piece. And you can still push it in to do whatever that allows you to do. I have played with this a bit and it appears to be completely responsive based on my limited testing. The only red flag. Pictured, is the CRYSTAL 1 dEAd display. I assume that is because it isn’t connected to anything. But I could certainly be mistaken. I have shown a variety of other less ominous displays. And I have a pretty good feeling that in fact it will be functional. If you pay the asking price and find it has a problem you cannot live with within 14 days of receipt you may return it. Returns are ONLY allowed on Buy It Now Purchases. Accepted Best Offers are strictly an as is sale. No returns allowed. Return would be for a refund of the purchase price. Not including shipping costs. Please check out my for more interesting lab. Test, and optical equipment. Check back often! Sold as is. As described, as pictured. Potential buyers are asked to please make sure you have read the listing carefully. And understand what you
CVC Vacuum Deposition System - Partial
CVC Vacuum Deposition System Parts: Frame(48"H x 32"W x 28"D) on 2" double-wheel casters. Bell Jar Base for 11" OD/ 8" ID flange& 21" Dia collar, power supplies& accessories. This system is for parts only. Shipping is listed as"Pick Up" only. If you want this item shipped, you will need to make arrangements& bear the cost. Make offer. If you need more photos, please send an alternate e-mail address with your request. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13eddbd702a-0xeb-
MAXTEK 360C deposition controller
Maxtek 360C version 1.01.nice shape. Comes with power cord,crystal interface and manual remote, selling off surplus stock.
ANGUILLA 294 (SG294) - "The Deposition" (pf19793)
STATE of ANGUILLA April 25. 1977 Easter Paintings Issue"The Deposition" by Ugolino Thirty Cents Multicoloured White Wove Unwtmk Paper Perforated 13.5 x 14.0 Lithography Printing Questa Security Printers. London_ Scott 2010 Catalogue: Anguilla 294($ 0.30 US) Stanley Gibbons: Anguilla 294 Very Fine Mint* Never Hinged Inventory Number PTTS pf19793.jpg_ The PERFORATIONS NETWORK OTTAWA CANADA Powered by
GRENADA 638 (SG707) - "The Deposition" by van der Weyden (pa19734)
COMMONWEALTH of GRENADA May 21. 1975 Easter"Paintings" Issue"The Deposition" by Rogier van der Weyden Two Cents Multicoloured White Wove Unwtmk Paper Perforated 14.5 x 14.5 Lithography Printing Format International Security Printers. London_ Scott 2011 Catalogue: Grenada 638($ 0.20 US) Stanley Gibbons: Grenada 707 Very Fine Mint* Hinged GRENADA EASTER PTTS pa19734.jpg_ The PERFORATIONS NETWORK OTTAWA CANADA Powered by o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13ef3e501d1-0xfe-
Complete High Vacuum Optical Coating / Deposition System
This is a complete bell jar vacuum coating system. The system is a product of Optical Film Engineering Co. Phila 33 PA) The chamber is 12+inches in diameter and height. It has 6 electric feed thru leads. And one rotary shaft. It uses both a mechinal main pump and a diffusion pump. Has built in power supply for filament heating. This unit has been under vacuum for years without use. It is a my backup unit, but I have not needed it in more that 7 years, so it is time to sell. It was used for aluminum coating. Local Pickup preferred. If shipped a packaging charge will be charged. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ef485191f-0x108-
Maxtek/Inficon MDC-370 Digital Display Thin Film Averaging Deposition Controller
Search our eBay Store! Maxtek/Inficon MDC-370 Digital Display Thin Film Averaging Deposition Controller SKU: JV-ZOR-B-MAXMDC370DCON Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Maxtek/Inficon MDC-370 Digital Display Thin Film Averaging Deposition Controller Model: MDC-370 Input: 100/120/220/240Vac 50-60Hz. 25-Watts Fuse: 4/10A. 250Vac Software Version: 1.2A Physical Condition: Good- Minor scuffs/scratches on the unit. Front panel displays and controls are in good condition. Connection ports show no noticeable signs of damage. Functionality/Degree of Testing: Unit powers on. Intro screen reads“WARNING! ... moreProces Data Corrupt_ Press any key to continue. After pressing a key. Unit’s navigational menu is responsive. We do not have the necessary resources to further test this unit. Dimensions(L" W" H" 10 ¼ x 19 x 3 3/8 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technica
Complete High Vacuum Bell Jar Evaporator Optical Coating / Deposition System
This is a complete bell jar vacu um Evaporator coating system. The system is a product of Optical Film Engineering Co. Phila 33 PA) The chamber is 12+inches in diameter and height. It has 6 el ectric feed thru leads. And one rotary shaft. It uses both a mechinal main pump and a diffusion pump. Has built in power supply for filament heating. This unit has been under vacuum for years without use. It is a my backup unit, but I have not needed it in more that 7 years, so it is time to sell. It was used for aluminum coating. Local Pickup preferred. If shipped a packaging charge will be charged.
MKS MDD 5.0 Mole Delivery Device for ALD Precursor Atomic Layer Deposition PARTS
Search our eBay Store! MKS MDD 5.0 Mole Delivery Device for ALD Precursor Atomic Layer Deposition PARTS SKU: JV-ZOR-C-MDDKS Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge MKS Instruments MDD 5.0 Mole Delivery for ALD Precursor Delivery*FOR PARTS OR REPAIR* Model: MDD 5.0 P/N: 1005501-001 Physical Condition: Fair; Unit has some deep scratches and a few dents on its casing. The side valve openings and the data ports are in good physical condition. We do not have the necessary resources to test this unit. BEING SOLD AS-IS FOR PARTS OR REPAIR. Dimensions(L”W”H” 17 x 12 x ... more12 ¼ Description(For Informational Purposes Only) The MKS Mole Delivery Device(MDD) is the latest in ALD precursor delivery and control technology necessary to meet the demands of next generation semiconductor logic and memory devices. Utilizing fundamental gas measurement principles and application specific control valves. The MDD precisely delivers precursors for maximum process uniformity and repeatability. With MKS’patent pending modeling program, the MDD is able to precisely deliver liquids as well as dissolved solid precursors and gases with low volatility in discrete micromole doses from 10 to 500 µmoles as specified by the user. The unique precursor on demand delivery capability eliminates waste of expensive precursors, reducing process costs. In addition, the MDD offers e-diagnostics through an embedded Ethernet interface that allows monitoring of performance parameters during operation. The MDD is the most accurate and repeatable precursor delivery technology available for compounds including silicon, aluminum, titanium and hafnium. Alternative delivery methods such as bubblers, liquid flow controllers with vaporizers, and vapor controllers require delive
INFICON XTC/2 deposition controller
INFICON XTC/2 thin film deposition controller.for deposition of 1 to 3 layers. unit comes with 120v power plug. Crystal interface unit and 2 interface cables, 1 pack alloy coated crystals and a hand held manual remote controller
Sycon STM-100/MF Thin Film Deposition Thickness Rate Monitor
Removed from a working Jet Vapor Process deposition tool. We applied power and the display comes on. We are not able to fully test this. But we are guaranteeing it to be operational. NO REASONABLE OFFERS REFUSED! We provide domestic packaging for the winning bidder. Packaging for international and crated shipments will be added to invoice. Please note: Buyer must arrange shipping- we'll provide weights and dimensions upon completion of the transaction We can deliver the item to you within the Austin TX metropolitan area for $50 per delivery You can physically pick up the item at our facility and avoid any shipping costs These pictures are only a representation of the product if there is more than one item Please check our other auctions. And Visit our E-Bay Store We provide a 14 day right of refusal. However all shipping costs to return ... morethe product are the responsibility of the buyer. Our goal is to process domestic orders for shipment within 3 business days. Please allow some additional time for large and international shipments. If necessary. Please ask for our current order processing time prior to purchase. We accept PayPal or Wire Transfer ONLY
1807 Signed Deposition Capture of the Schooner General Green
1807 Signed Deposition Capture of the Schooner General Green. Signed Deposition Capture of the Schooner General Green. December 22. 1807-Dated, Manuscript Document Signed, James Craig Sarmiento and Henry Hunt, Pair of Attached Partially-Printed and Mauscript Documents, About Fine. James Craig Sarmiento and Henry Hunt. Formerly of the Schooner General Green, have signed a deposition. They report that in October of 1807 they were on a journey to Philadelphia when captured by the English War Ship Tweed, Captain Symonds in command. It seems that Captain Symonds took their ships papers, and also the log book. In the interim the log book was lost. The Ship, General Green was released in November and continued on her journey. The crew members have now petitioned the Court of Admiralty for the return of their logbook. Signed by James Craig Sarmiento, ... moreHenry Hunt and John O'Hara. Also tipped to the front of this document is a statement from Robert Stevenson, stating that the two crew members have sworn an oath to tell the truth. This is a rather unique, historic pair of early Maritime documents. The Oath is 8” x 14” being tipped to the larger deposition page, which itself measures a large 15” x 17” having some expected folds, minor paper loss and in overall very good condition. The Embargo Act of 1807 was a law passed by Congress and signed by President Thomas Jefferson in 1807. This law stopped all trade between America and any other country. The goal was to get Britain and France. Who were fighting each other at the time, to stop restricting American trade. This Act backfired, and the American people suffered. The Act was ended in 1809. Item Number: 97344. Complete Table of Contents. Current Offerings and Additional Images can be found at Early American History Auctions online Over 1.000 items currently online! Powered by The free listing tool. List your items fast and easy and manage your active items.
Technics PD-IIA Deposition System
Technics PD-IIA Deposition System The Technics PD-IIA Deposition System is for use With the Technics PE-IIA Plasma Etching System. Features& Specifications: PD II-A Comprises the Platen Temperature Controller, Watlow 808 Temperature Controller 3 ea. Vacuum General 80-4 Flow Controller Do Not Exceed 350 Degrees Celsius Power: 120 Volt 20 Amp. 50/60 Hz Actual Net Weight: 66 LBS Dimensions: 26" H] × 14" W] × 21" D] Listed By Joew All Items are Sold with a 14 Day Unconditional Right of Return and Guarantee(2 Full Weeks from Date of Receipt) All Sales are FOB Ocean N.J. All Items are Expertly Packed. Buyer is Responsible for Shipping in the Event of a Return. Tech-Systems will Pay Return Shipping in the Event of an RMA(Repair) Please Visit our always changing eBay Store. Be sure to add me to your favorites list! Check ... moreout my other items!
12" Al target for UHV metal deposition
12" Al target for UHV metal deposition
MEC86008-1047 Shield, Deposition, single port 200mm MEC
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! MEC86008-1047 Shield. Deposition, single port 200mm MEC Double Clicking on pictures will enlarge them. M E C Tech# MEC86008-1047 Shield. Deposition, single port 200mm Machine: Unity-II DRM( ELECTRODE. VESPEL) NEW Please check all photos in case of damage that is not noted above. This is used equipment and some items are in very used condition. Except for what is shown in the photos. This item does not include any other documentation, accessories, cables or software unless stated. Images are of the item we are selling unless otherwise noted. Shipping Cost: Actual Shipping cost Plus $5.00 USA& Canada; Actual Shipping cost Plus $15.00 all other locations; This is for packaging and handling. ALL INTERNATIONAL SALES ARE SOLD AS IS I have 100s of Optical Parts& Equipment- listed ... moreon Ebay and in My Ebay Store- So follow the link below to my store. Check out my other Auctions Payment Methods: For domestic payments we accept most major credit cards(Visa. Amex, and Mastercard) Cashiers Check, Money Orders, NO Personal Checks. We accept Pay Pal Payments for varified shipping address. For International sales- Bank Wire Transfer(add 25.00) or Money Order. Paypal- if pre approved) Recipient is responsible for all customs. Duties and taxes incurred and payable to the carrier. Buyer must contact seller within 3 buisness days. Or your order will be cancelled! Buyers in CA please add 8.25% for Sales Tax. Unless you have a fully completed CA Sales Tax Exemption Certificate. We will need a signed scanned copy of this email to us. Shipping Methods: The buyer pays shipping charges determined by recipient address or a Flat Fee- Check the listing for detalis. All shipments are sent via UPS. For orders outside the United States. International Economy will be used. International Buyers must get a shipping quote prior to placing their order. Buyers in Russia. Africa& the Middle East need to contact me prior to bidding. Fix Cost shipping is for Continental
iCON MVS VAPOR SOURCE GENERATOR / BUBBLER SYSTEM for CHEMICAL DEPOSITION CVD
iCON MVS VAPOR SOURCE GENERATOR/ BUBBLER SYSTEM for CHEMICAL DEPOSITION CVD Made in USA by iCON Dynamics. LLC, of Rhinebeck, New York. iCON's MVS Vapor Source Generator System. Model# 3X MVS BUBBLER SYSTEM Serial# 10058-2 Date of manufacture: December. 2007. iCon Dynamics. LLC manufactures patented Vapor Delivery Equipment for Solar Panel, Optical Fiber, Semiconductor, other industries that use CVD processes. Chemical Vapor Deposition(CVD) is a chemical process used to produce High-Hurity. High-Performance Solid Materials. The process is often used in the Semiconductor Industry to produce thin films. In a typical CVD process, the Wafer(Substrate) is exposed to one or more volatile precursors, which react and/ or decompose on the substrate surface to produce the desired deposit. Frequently, volatile by-products are also produced, which ... moreare removed by gas flow through the reaction chamber. Microfabrication processes widely use CVD to deposit materials in various forms. Including: Monocrystalline, Polycrystalline, Amorphous, and Epitaxial. These materials include: Silicon, Carbon Fiber, Carbon Nanofibers, Filaments, Carbon Nanotubes, SiO2, Silicon-Germanium, Tungsten, Silicon Carbide, Silicon Nitride, Silicon Oxynitride, Titanium Nitride, and various High-K Dielectrics. The CVD Process is also used to produce Synthetic Diamonds. A Little Bit About Bubblers And Vapor Generation Systems. A Bubbler for use in Vapor Generation Systems that minimizes splashing and the formation of aerosol droplets of liquid. Which are carried out of the Bubbler in the vapor stream and result in Erratic Mass Transfer of the process chemical. A closed stainless steel vessel contains a carrier gas distribution plenum that distributes the carrier gas to a plurality of small diameter generator tubes, which are submerged into the process chemical. The length, inside diameter and number of the generator tubes are designed to inject a high velocity, small diameter stream of carrier gas into the liquid such that a long small diamet
Yield Engineering Vapor Deposition System YES-1224P
Yield Engineering Vapor Deposition System YES-1224P Came out of a business closing down you are welcome to come inspect the unit purchased in 2007 for $188.000. PRODUCT INFO Title Yield Engineering Vapor Deposition System YES-1224P Stock# 20415122LIV Asset# 332636 Manufacturer Yield Engineering Model YES-1224P Part# 900-10580-11 Serial# 88968 Voltage 115V Power Cord- Adapter power cord included Warranty 30 day warranty Service or Questions Contact Sales@RenewedEquipment.com 734-564-5952 Price $69.999.00 CONDITION Working Condition pulled from working environment Cosmetic Condition Excellent DIMENSIONS Outside Dimensions L 40.5" x W 40.5" x H 46.5" Inside Dimensions L" x W" x H" Table Dimensions L 46.5" x W 46.5" x H 24" Port- Vent Diameter 2.75" SHIPPING Item Weight 1000 lbs Shipping Weight ... more1100 lbs Shipping Size 48x48x72 Shipping USA $299.00 Shipping Canada $349.00 Shipping International $1.800.00 NOTES YES vapor deposition systems provide total environmental control over the deposition process and accommodate a variety of functionally diverse silanes. For a variety of processes, on a variety of surfaces. YES-1224P gives process engineers control over: Amount of liquid. Speed of liquid injection, Vaporization chamber temperature, Vapor line temperature, Process vacuum chamber temperature, Process starting pressure, Exposure time, and Surface preparation. LINK- http:www.yieldengineering.com/products/vapor-deposition-systems/1224p Nor-cal Products Silver pump/ Model# 940-4898-02/ Serial# 8216980-1 Advanced Energy PE-1000 AC Plasma Power Source/ Model# 3157502-005/ Serial# 634190/ 230 Volts/60Hz YES vapor deposition systems provide total environmental control over the deposition process and accommodate a variety of functionally diverse silanes. For a variety of processes, on a variety of surfaces. YES works collaboratively with Brigham Young University. Department of Chemistry and Biochemistry to develop and prove processes using the YES-1224P. Read more about the c
Niue 1978 Easter Paintings from Vatican Galleries the Deposition of Christ SG241
Niue 1978 Easter Paintings from Vatican Galleries the Deposition of Christ SG241 Very fine. Mint, never hinged. My Policies: Another auction from Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f365c87ca-0xfe-
Interlocked vacuum chambers for deposition on 2ft.*4 ft. plates
Modular interlocked vacuum chambers by Mill Lane C corporation suitable for treatment and/or thin film deposition on glass plates as big as 2ft.4ft. No instrumentation; no pumps. Just the three chambers. The plates can be brought in and out of the system without breaking the vacuum in the middle chamber. Reduced price by $5.000 to $14,000.
PVI STAINLESS STEEL HIGH VACUUM CHEMICAL VAPOR SHOWER DEPOSITION CHAMBER
PVI STAINLESS STEEL HIGH VACUUM CHEMICAL VAPOR SHOWER DEPOSITION CHAMBER This is the second component of the eight(or so) main chamber components which were all part of a very sophistocated Chemical Vapor Sputtering Deposition Process Line. A local company contracted the construction of these main High Vacuum Chamber components to a company called PVI System Technology. Of Oxnard, California. PVI is a System Engineering& Manufacturing company specializing in High Vacuum and Thermal Process Technologies. Since 1981. PVI Engineers& Technical Staff have successfully designed& manufactured a wide variety of Automated Vacuum Processing Systems for the Photovoltaic, Flat Panel Display, Semiconductor, Aerospace, High Purity Material& other challenging industries. Background/ History Previous owners went into great detail when explaining ... moreto us how much time. Money and tedious effort went into this project of theirs, not to mention the remarkable fact that this this Deposition Line, once completed, never saw more than FOUR HOURS OF TOTAL USAGE in production! The specifics and technical terminology was actually"Greek" to us lamen, but we got the jist of just how elaborate and involved this whole set-up actually was after researching many of the other components taken from the line. Fortunately, for the prospective bidders out there in eBay land who might be in the market for some of these components, this short-lived Deposition Line has been dismantled for individual resale of its MANY components. As with all the other components that came off of this line. The general, overall condition of this item clearly does reflect the previous owner's claim of VERY low usage to be quite accurate. Function This set-up was processing Glass Substrate Plates. Before entering this particular chamber. Glass Substrates were conveyed through a Pre-Heating Chamber in groups of three, where they would be pre-heated up to a temperature of 160°C to 170°C. Next. The chain driven conveyor would pass the Sub
PRODUCTION PROCESSES Metalworking/Forming/Deposition/Molding/Casting/+ BOOK SET
BOOK TITLE: Production Processes. Their Influence on Design. Volume I and Volume II. AUTHOR: Roger W. Bolz CONTENTS: Volume I: Mass production and design, Metal removal methods: cutting. Sawing, planing, shaping, slotting, turning, lathe machining, milling, screw machines, drilling, boring, hobbing, broaching, gears, grinding, honing, lapping, superfinishing Metal forming methods, Metal working and forging methods, Metal deposition methods, Volume II: Casting methods, Molding methods, Fabricating methods, Treating methods DESCRIPTION: 2 Hardbound Books. 1949& 1951, 554& 343 pages CONDITION: The books are in good condition inside. With the previous owner's name on the inside cover, and with cover rubs. SHIPPING: $5.53 Media Mail(1-2 weeks) shipping. Priority Mail(1-3 days) shipping cost can be given if requested. FYI: I ship on ... moreMonday. Wednesday, and Friday when payment is received by 6:00 p.m. the night before. INTERNATIONAL SHIPPING: Please contact me for international shipping rates. PLEASE CHECK OUT ALL OF THE ENGINEERING. PHYSICS, MATHEMATICS, AND TECHNICAL BOOKS I HAVE ON eBAY AND IN MY eBAY STORE DISCOUNTED COMBINED SHIPPING IS AVAILABLE ON ALL OF MY BOOKS!
NRC 3114 Vacuum Coater Deposition system Evaporator Chamber Diffusion Pump
This auction is for an NRC 3114 Vacuum Coater. This unit was pulled from storage at a local university and is in unknown working condition. Everything included is pictured in this listing but it is obviously missing pieces. Use for parts or build it back up! Glass Chamber is still completely intact and measures 13.5" in dia. interior dimension) Feel free to email me with any questions. Thanks for looking and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
CARVED WOOD POLYCHROME & GILT RELIEF PLAQUE, DEPOSITION, SOUTH GERMAN 18TH C
A LARGE AND IMPRESSIVE CARVED. POLYCHROME AND GILT RELIEF PLAQUE OF THE DEPOSITION, SOUTH GERMAN, 18TH CENTURY. Carved in high relief of good proportions. The top carved with heraldic shield beneath an Imperial crown resting upon ribbon-tied palms and the borders carved with laurels and set with additional heraldic devices. The lower margin with blank cartouche within a framed scrolled border. 20.5 inches x 23.5 inches(52 x 59.7 cm) WE SHIP WORLDWIDE!
Plasma Technology Mod DP 80 etcher-semiconductor chips deposition-Edwards E2M40
You are bidding on Plasma Technology Model DP 80 semiconductor processing film deposition(etcher? as shown in Picture Gallery- contains Edwards E2M40 High Vacuum Pump- these go for $900- $1400 on eBay DP 80 looks to be in fair to good shape but since we don't have the ability to test it. We are calling it a parts machine. Seems like it is nearly complete except for one missing Temperature read-out module in the top control and deposition unit. Besides high vac pump. Has about $1000 or more of valves, gauges, flow controllers, etc, not including power supplies, sensors, pnuematic and electronic controllers, vacuum parts-fittings, vacuum chamber and RF generator section. just SLASHED PRICE Over 90% from $22.000- Machine is estimated to weigh about 800 lbs. We can assist in getting a decent freight quote with reliable truck broker. May be ... moreusable for nanotechnology like nano wire growth. See Oxford Plasma Technology) Etching 2 Plasma Technology RIE System DP 80(F-based processes only? Application example: The nitrogen-rich silicon oxynitride thin film for gate insulator application has been studied in this work. The Plasma Enhanced Chemical Vapour Deposition(PECVD) process was carried out at 350 degree(s)C with a low power density(0.011 W/cm 2) The equipment used for thin film deposition was a commercial Plasma Technology DP-80 parallel chamber system. S1H4 and NH3 was used as reactant gases. We beieve it may have specs as follows(comes with a manual and more) PLC control system with Touch screen interface which allows the system to operate in manual and automatic mode. 300W 13.56MHz RF Generator. 240mm Heated substrate electrode with PID temperature controller. External gas box with 6 mass flow controlled gas lines and a Nitrogen. Purging facility. For depositing a-si(H) SiOx, SiNx. Applications include dielectric isolation. Hard masks, diffusion masks and. Anti-reflection coatings. Sample sizes from a few mm2 up to 4” wafers. Gases available SiH4. NH3, N20, CF4, O2 and N2. A how- to book at p 3
Inficon Sentinel III EIES Thin Flim Deposition Controller Model 753-002-G1
Just in from a local aerospace company sale comes this Inficon Sentinel III EIES Thin Flim Deposition Controller Model 753-002-G1. I have 2 available of these controllers available, both power on and I can scroll thru the screen, but I have no knowledge in how this works so im willing to discount these down for a quick as-is low low priced sale. But this is sold as-is NO RETURNS. Our knowledge is limited at best about this item so if you have technical questions we suggest you Google the part number or contact the manufacturer. Paypal due immediately/ Local Pick-up available 8am-12noon weekdays from 91355/ CA sales tax required/ Ship Days M-W-F 8am-12noon, Location/ FOODROOM
Inficon XTM Thin Film Deposition Controller / Thickness Monitor
Inficon XTM Thin Film Deposition Controller/ Thickness Monitor Used. As shown in the photographs. Powers on, responds to front panel buttons, no further testing done. All pictures contained in this auction are of the actual item up for auction. Click on the pictures to enlarge them to full size. Contact information: Our contact information will be provided to the high bidder upon auction completion including our address and phone number. If you are having email problems. It is possible that our email is being stopped by your spam filter. Make sure you check your ebay registered email. Our software, Ebay's Blackthorne Pro uses your ebay registered email address for communication not Ebay messaging. If you cannot locate the email from us, use ebays"Find Contact Information" on the Advanced Search page to get our phone number so ... moreyou can call us to let us know you are having a problem receiving email. We are available Monday, Wednesday and Friday for phone calls. This is an internet based business, so the majority of our communication will be done through email and ebay messaging. Payment: We accept payment through PayPal from US and Canadian account holders with a confirmed PayPal address. We do not accept international PayPal so do not ask and do not assume that we will. Again PayPal payments must have a confirmed address. We will only ship to your confirmed PayPal address. Again. We do not accept international PayPal All California residents will be charged 8.75% sales tax. Payment must be received within 7 days of the time you receive you total including shipping. Shipping: We ship within the United States and Canada only. We do not ship to PO boxes including APO/FPO. Upon request. And with the understanding that we do not take international PayPal and only ship internationally using FedEx International, we will accept international bids. Like all bidders. International bidders are responsible for all shipping costs. If the shipping cost is not give because the item is a large freight item. Or requi
SPECTOR CONVERTIBLE OPTICAL DEPOSITION SYSTEM with the SOURCERER Ion Beam
Veeco Optical Thin Film Coating System Ion Tech Spectro dual Ion Beam deposition system Pumping System CTI-400 On Board Cryo Pump Leybold Mechanical Pump Chamber Vertical Split Bell Jar. 42" diameter x 36" high Target Holder 4 each 10 x 14" diameter Sourcer 32 Ion Beam system manager 1 RF12 cm Ion Beam Assist Source 1 RF16 cam Ion Beam Deposition Source 2 RF Neutralizers 2 Gas flow controllers Please call Gina at 510 734 5033 for additional pictures and information
Balzers Quartz Crystal Deposition Thickness Monitor QSG301 L326
One of two used Balzers Quartz Crystal Thickness Monitor QSG301, S/N: BGS04250/0390 BGS04250/173 220V 50/60 Hz. Powers up and seems to work. But we have not fully tested the unit and it is sold as is. Front plastic of meters are broken. L326)
MDC EV-FT Thin Film Deposition E-Vap Flow Transmitter Filament Transformer EVAP
Payment Policy Brand New Sony CyberShot 8 MP Di MDC EV-FT Thin Film Deposition E-Vap Flow Transmitter Filament Transformer EVAP Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description MDC EV-FT Thin Film Deposition E-Vap Flow Transmitter Filament Transformer EVAP Used Condition MDC Vacuum Instruments Thin Film Deposition E-Vap Flow Transmitter Evaporator Filament Transformer Model: EV-FT Serial No: 970411 For Use With CVS Power Supply. Source Control E-Vap Flow Transmitter Systems. INV# 20B90724-06-13 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. ... moreThe serial number of the item that you receive may vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Sh
Sycon Inst Deposition Rate Controller STC-200 w/ MRX-100 Memory / Relay Expander
Pulled from working system. Good condition. Includes manual and memory card as shown. MRX-100 info: MRX-100 Memory Card/ Relay Expander The MRX-100 is a peripheral device used with the STC-200. It has two main functions. The first is to expand the I/O capacity of the STC-200 by providing an additional 8 relay outputs and 8 logical inputs. The second function is to save the programs in the STC-200 onto a memory card that can be removed from theMRX-100.The MRX-100 is housed in a 1-3/4" high enclosure that is the same outline as the STC-200. When the two units are bolted together. The overall package is 5-1/4"high and fits in a half rack space. The MRX-100 also provides external, parameter storage capability to the STC-200 via a PCMCIA memory card. The removable memory card makes it possible to store and recall all of the parameters ... morein the STC-200. The memory card is about the size of a credit card and can be read by an IBM-PC computer with the addition of a memory card reader. This allows easy switching between different process recipes that the STC-200 may use.
Novellus Concept Two II Altus Deposition Tool Main Body DLCM0327
This Novellus Concept Two deposition chamber is used untested surplus. The physical condition is good. But there are some scratches from previous use and handling. This item is being sold As-Is. Part No: DLCM0327 Model No: DLCM Serial No: 97-34-5375 Electric Diagram No: 76-10471-00 Unit Type: Concept Two Made in USA Condition: Untested. Sold As-Is Estimated Packed Shipping Dimensions: Requires Freight Shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will ... morebe sent. 90-Day Satisfaction Guarantee(See Details Below) Lister R Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best and mo
INFICON XTC Leybold-Heraeus model 751-001-G1 thin film deposition thick control
RELIABLE COMPUTER SERVICES. Inc. 28 Years of Buying& Selling computer hardware by DEC or"Digital Equipment Corporation" Since 1985. RCS Inc. has been buying& selling computer hardware by DEC or Digital Equipment Corporation for 28 Years. Buying whole machines/sights& selling the peripherals& parts to Maintenance companies& even back to DEC. When it comes to purchasing or selling computer hardware by DEC. Call the company that delivers what they promise at the fairest market price. We will also be selling many non DEC related items here on Ebay. We will be attending many auctions.Liquidations,surplus& bankruptcies sales here in Chicago& the Midwest area. We will be selling a wide variety of items. From printers& plotters to floor scrubbers& Oscilloscope. Tools, Antique's,Computer hardware, ... moreCopiers, motors, generators, Radios, Test& Scientific Equipment. Please check back often, most auction will run-7- days. Payment is due within 10 days of purchase. WE DO ACCEPT PAYPAL for INTERNATIONAL payments if Paypal will Guarantee the payment. All International shipping charges must be Prepaid to RCS Inc. As the Exporter. We are liable for these charges if the buyer does not pay. We cannot& will not ship freight collect. We are located in LOCKPORT IL. About 35 miles SW of Chicago IL. Most items can be inspected in our warehouse before bidding. Please call 1st& make an appointment. 815)838-0134 We are not there or available everyday. Thanks Send payment to: Reliable Computer Services. Inc. 1369 Daviess Street Lockport. IL. 60441 Phone(815)838-0134 Email Search Words:INFICON XTC Leybold-Heraeus model 751-001-G1 thin film deposition thick control.
Aviza Celsior atomic layer deposition process module
These units are from a decommissioned Aviza Celsior ALD system. Two of the four original process modules are up for sale and they have not been removed from their crates.They are currently covered in plastic and mylar film for protection. The photographs are from one of the other modules. But all are identical. These modules are set up for Al2O3 deposition using TMA. Although the TMA bubblers have been removed. These were in working condition when the system was dismantled for shipping. Below is an incomplete list of the equipment on each unit. Aluminum single-wafer vacuum chamber with shower head gas inlet. MFC Model no: Aera FC-DN780C-BA. He 3 slm. Ar 500 sccm. Ar 200 sccm. Ar 500 sccm. MKS T3BIA gate valve with integrated controller. Nor-Cal pneumatic linear gate valve. Epichem bubblers with model liquid level indicator. 2 MKS Baratron ... moretype 728A 100 Torr gauges. 2 MKS Baratron type 631B 10 Torr gauges. The crated modules weigh 2500 lbs. And the buyer must arrange their own freight shipping.
CHA SEC 1000-32 High Vacuum Thin Film Deposition System (E-beam Gun)
CHA SEC 1000-32 High Vacuum Thin Film Deposition System with the following features& equipment: 32inch Diameter Stainless Steel Water Cooled Bell Jar Vacuum Chamber CTI-10 Cryopump and Compressor. And Edwards E2M Direct Drive Mechanical Pump CHA Auto Tech II System Valve Controller with Auto Bell Jar Hoist Option CHA Cryopump Regeneration Controller Granville Phillips 307 Dual Ionization Vacuum Pressure Gauge Controller CHA Substrate Heater(8KW) Power Supply. And CHA Thermal Resistance Deposition Source Substrate Quartz Lamp Heater Assemblies& Heater Temperature Controller CHA 5KVA Thermal Resistance Deposition Power Supply Temescal four(4) Pocket Electron Beam Gun Deposition Source CHA SR-10. 10KW Electron Beam Gun Power Supply with XY e-beam Sweep Control Inficon IC-5 Thin Film Deposition Process Controller(2each) Inficon Dual Crystal ... moreDeposition Thickness Sensor Heads- for Ebeam Source& Thermal Resistance Source Flat Plate Substrate Fixture(4 Holders) with Dual Axis Rotation& Substrate Rotation Speed Controller 2 3/4 inch Conflate Port for RGA Instrument. Buyer is responsible for all shipping charges and arrangements. Including Crating Fees. This is a very large unit, please call if you have any questions: 925)447-9136. Click here to browse my ebay store.
Novellus SCON5375 Deposition System Controller Concept Two Altus SCON As-Is
This Novellus Concept Two Altus deposition system controller is used untested surplus. The physical condition is good. But there are some scratches from previous use and handling. This item is being sold As-Is. Part No: SCON5375 Model No: SCON Serial No: 97-34-5375 Unit Type: Concept Two Made in USA Condition: Untested. Sold As-Is Estimated Packed Shipping Dimensions: Requires Freight Shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day ... moreSatisfaction Guarantee(See Details Below) Lister R Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best and most economical way
Novellus CVD-W0177 Deposition Chamber B Concept Two Altus CVD-W Untested As-Is
This Novellus Concept Two Altus depostion chamber is used untested surplus. The physical condition is good. But there are some scratches from previous use and handling. This item is being sold As-Is. Part No: CVD-W0177 Model No: CVD-W Serial No: 97-34-5375 Electric Diagram No: 76-10656-00 Unit Type: Concept Two Made in USA Condition: Untested. Sold As-Is Estimated Packed Shipping Dimensions: Requires Freight Shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one ... morethat will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister R Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best
Emscope SM300 Thin Film Sputtering Deposition System w/ Planetary Sampling Stage
Search our eBay Store! Emscope SM300 Thin Film Sputtering Deposition System w/ Planetary Sampling Stage SKU: JV-HAN-C-EMSCOPESM300 Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Emscope SM300 Thin Film Sputtering Deposition System w/ Planetary Sampling Stage. BEING SOLD AS-IS FOR PARTS OR REPAIR. Model: SM300. Power Requirement: 110V; 12A; 60Hz. Physical Condition: Good– Some scuffs/scratches on exterior. Unit is missing one screw for the rear panel. Functionality/Degree of Testing: Unit powers on. Gas burst. Pump, and gas bleed switches are responsive. The pump switch ... moremust be pushed gently to work. Coat button appears to be unresponsive. We do not have the necessary resources to further test this unit. Power cable is included. Dimensions(L" x W" x H" 18-1/2 x 11-1/4 x 14. BEING SOLD AS-IS FOR PARTS OR REPAIR. THE FDA DISCLAIMER BELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the de
Leybold Inficon XTC/2 Thin Film Deposition Controller Model : 757-500-G1
For sale Leybold Inficon XTC/2 Thin Film Deposition Controller Model: 757-500-G1. Unit is clean remove from working machine
ATMI CDO Controlled Deposition Oxidation Model 863 ECOSYS 862 Abatement System
Removed from a working environment. Due to lack of knowledge. It is only offered AS-IS. FOR A LIMITED OF TIME THIS ITEM IS OFFERED AT A DISCOUNTED PRICE WITH FREE FREIGHT SHIPPING TO BUSINESS ADDRESS. PLEASE ACT QUICKLY. FREE FREIGHT SHIPPING TO THE 48 CONTINENTAL STATES ONLY. Powered by
Intellemetrics IL 800 Deposition Controller Applications Manual
Intellemetrics IL 800 Deposition Controller Applications Manual Description Intellemetrics IL 800 Deposition Controller Applications Manual Manufacturer Intellemetrics Manufacturer Part Number IL 800 Deposition Controller Item/Ship Weight 4 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact ... moreus before bidding. Shipping We will professionally package. Using instapak foam-in-place if needed, and insure this product for safe delivery. Domestic shipping rates are available using the shipping calculator below, subject to terms& conditions. Please contact us for international shipping rates. PID 27905 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an adjustment to a different method which may change the price for shipping as well. This bug has been reported, but they gave no timeline for a fix, so if you are purchasing an item on the larger side(boxed size approx. 20x2
SIGMA INSTRUMENTS SQC-330 DEPOSITION CONTROLLER
SIGMA INSTRUMENTS SQC-330 DEPOSITION CONTROLLER. Serial# 81203 Out/Inputs: Sensor1.2,1,2, I/O 1-8, RS-232, USB/ethernet, Power: 100-120/200-240V 50/60HZ 25VA- This SIGMA INSTRUMENTS SQC-330 DEPOSITION CONTROLLER Powers on comes with remote oscillator( serial# 2853) no dead pixels or screen issues.
Inficon Film Thickness Control for Vacuum Deposition L315
Used Inficon XTM Film Thickness Monitor Controller 120/240V for 2 monitoring gauges during Vacuum deposition. The device powers up. But we have not fully tested and calibrated the unit and it is sold as is. L315) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items ... moreare sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these criteria is not met, we reserve the right to withhold funds for an indefinite term until all requirements are met. If you feel that you have received an incorrect item, please retain the item and a
Inficon 31 Film Thickness Monitor for Vacuum Deposition L314
Used Inficon 321 Film Thickness Monitor. S/N: 15-0066. 115V, 50/60 Hz. The device powers up, but we have not fully tested and calibrated the unit and it is sold as is. L314) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty ... moreor guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these criteria is not met, we reserve the right to withhold funds for an indefinite term until all requirements are met. If you feel that you have received an incorrect item, please retain the item and all packaging materials and notify us AS
Inficon Temescal IC/5 Multi-process Deposition Controller Cables and Oscillators
You are bidding on these Inficon IC5 cables and oscillators. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. Our preferred carrier is FedEx. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
INFICON XMS-3 Thin Film Deposition Controller
Has been sitting in storage. Pretty sure it works still.
Balzers Mini Deposition System MED 010 with Turbopump L592
Balzers Mini Deposition System MED 010 with Turbopump and high voltage charge for charge cleaning. And Balzers Pirani-Cold Cathode Gauge Control + Gauge, Pfeiffer Power Supply TCP040, the Turbopump Control unit, PKG-202 Vacuum Display Unit, and Quartz Crystal Thickness Control QSG 301, as well as WF 336, B4007271-T, 4” Diameter Deposition Chamber with targets holders and a Gas Dosing Valve. Comes with a detailed manual. S/N: BU007 250-T/155. The system pumps down nicely. However, as we did not recently calibrate and utilize the system it is sold as is. L592) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions ... morewill be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation wil
Temescal BJD 1800 Thermal Evaporator - Co-Deposition - Refurbished - Warranty
Feel free to contact us for additional information through ebay mail. Or directly at: nrscientific@gmail.com/ 201) 592-1864. Temescal BJD 1800 Thermal Evaporator Dual Source Co-Deposition Refurbished- Mint Condition CTI Cryo Pump 3 Planet Depostion Fixturing Dual Cooke Thermal Evaporation P/S Sigma Dual Deposition Controller Please contact us for additional information. Photos, warranty terms and conditions, etc. etc. The system can also be customized for your application. For your reference. The seller is N&R Scientific Co. Inc. We have been providing the highest quality refurbished and fully guaranteed equipment worldwide for over 35 years. You can purchase with complete confidence that the equipment will be provided in excellent cosmetic and perfect operational condition. Our 50,000 square foot facility is located in the metropolitan ... moreNYC area.
CHA SE-1000 E-Beam Evaporator Deposition System
CHA- SE-1000 E-Beam Evaporator Deposition System Inventory# 57367*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. Electron beam high vacuum deposition system. Inficon IC4 crystal deposition rate monitor. Temescal CV-14 14 kW E-Beam power supply. Four Pocket E-Gun. CTI cryopump with compressor and roughing pump. Quartz lamps for substrate heating. Automatic or manual vacuum valve sequencing. Water cooled stainless steel 25 in. dia. bell jar with hoist. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional ... moreinformation on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
CHA SEC-600-RAP High Vacuum E-Beam Evaporator Deposition System
CHA- SEC-600-RAP High Vacuum E-Beam Evaporator Deposition System Inventory# 57377*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. Electron beam deposition system. Inficon IC5 crystal deposition rate monitor. CHA SR-10 E-Beam power supply with gun and sweep controls. Six pocket E-Gun with manual rotation control. Currently configured with single lift off dome for 3 in. wafers. Fixture rotation controls. Has controller for quartz heaters but none installed. 19 in. dia. stainless steel water cooled bell jar. Manual or automatic vacuum valve sequencing. CTI cryopump with compressor and roughing pump. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, ... morewith our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
Denton Vacuum BTT-IV Benchtop Turbo IV High Vacuum Evaporation Deposition System
DENTON VACUUM- BTT-IV Benchtop Turbo IV High Vacuum Evaporation System. Inventory# 57577*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. Compact turbo pumped dual source thermal evaporator fits on desktop. Two resistive thermal evaporation sources. Quartz 12 in. dia. x 18 in. H bell jar. Compound turbo molecular pump. Turbo rebuilt by manufacturer Dec. 2012. Built-in roughing pump. Touch screen interface to PLC provides full control. 208V. 1 Ph, 50/60 Hz, 20A. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional ... moreinformation on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
Balzers Switzerland High Vacuum Stainless Steel Deposition System, PS L595
Used Balzers Switzerland High Vacuum Stainless Steel Deposition Chamber System with Swing Open Access Heavy Door and 6” View Glass Port at the Center of the Door. Internal Chambers Deposition Dimensions are: 15.5” x 19” x 12” W. H, D) The chamber has the following additional ports: three(3) easy open 5” Diameter Ports and Four(4) 2.25” Diameter Conflat Ports and Many Feed-Through Ports for Gauges and Electrodes Supply. The system also includes the following electronic supply and Control System units: Balzers BSP104 Pumping Unit Control, S/N: 323. Balzers BSV202, 2 evaporation power supplies(up to 10A) + Glow Discharge Unit, S/N: 261. Balzers QSG201 Quartz Crystal Thin Film Monitor Unit, S/N: 805 Balzer EVM 052 High Voltage Control Unit upto 300 mA, 2500V, S/N: 195. The pumping system consists of: Balzers 4” Diffusion 900 Pump, S/N: 806, and ... moreBBC Brown Boveri MEPA100 Rotary Pump, S/N: 2177950. The Total Dimensions of the System are: 58” x 31.5” x 68” W, D, H) The system was used in the past for microtome and includes the following units(free of charge) Balzers BMP101 Microtome Movement Balzers BCM101 Commutator Unit. Additionally, inside the chamber it includes many vacuum holders and gadgets, which can be removed. The system is very clean and in excellent condition and it was pumped down to the 10-7 scale. However, as we have no way of testing and calibrating the system it is sold as is. L595) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items,
Trion Technology Orion Plasma Enhanced Chemical Vapor Deposition Tool
TRION TECHNOLOGY- Orion Plasma Enhanced Chemical Vapor Deposition Tool Inventory# 57485*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Small footprint PECVD system. Color flat panel display with touch screen interface. PC process controller. 8 in. dia. substrate chuck. Watlow temperature controller. 300W RF generator. 5 MFC gas controllers for process gases. Roughing pump. 208V. 3 Ph, 60 Hz. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via ... moreeBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
MDC 992540 E-VAP E-BEAM SOURCE ASSEMBLY 10''. THIN-FILM DEPOSITION. REFURBISHED.
MDC 992540 e-Vap e-Beam Source Assembly 10 CF. Refurbished. THE EBAY SHIPPING CALCULATOR DOES NOT WORK! To check the shipping cost before bidding: We will need your City. State, Country, Zip/Postal Code. Y ou can call us at 905-853-0078/ Toll Free 1-866-376-0078 Scroll below the photos for additional Fees and Auction Details. Hours of Operation: Monday to Friday 9:00AM to 5:30PM EST. Please Note: Shipping from Canada is higher than from within the Continental U.S.A. Shipping Overseas can be Expensive- We recommend you ask for a quote before bidding. MDC 992540 e-Vap e-Beam Source Assembly 10 CF. Refurbished. 4 Pocket- Professionally Reconditioned LIKE NEW" MDC has eliminated the difficulties of flange mounting electron beam sources. Problems associated with designing and fitting sources into coating systems have been solved with the ... moreintroduction of standard horizontal flange mounted evaporation sources. The compact footprint of these flanged evap systems allows the installation of up to three individual sources onto one 10 chamber. The flanged assemblies include an electron beam source with water and electrical connections. The water-cooled roof acts as a heat barrier between the source and substrate and also prevents vapor condensation on chamber walls. The water-cooled roof i s fitted with a deposition uniformity even when source and substrate centerlines are offset. FEATURES: UHV compatible system 10-inch Del-Seal™ CF flange Source Type& Volume: Four Pocket 6cc Assembly includes rotary linear and electrical feedthroughs clamps linkages water flow switch and water connections(please see actual photos below) Manual push-pull shutter High temperature 300°C manual rotary drive Flange seal surface to crucible centerline is 10" Comes with watercooled roof CONDITION: This item is refurbished. And is being sold as pictured. Final Sale. IMPORTANT SHIPPING NOTE: If you are considering purchasing this item and would like to know the APPROXIMATE Insured Shipping Cost Before Bidding. Call us at 905-853-0
Balzers Quartz Crystal Deposition Thin Film Thickness Monitor Unit QSG 201 L573
Used Balzers Quartz Crystal Thin Film Deposition Thickness Monitor Unit QSG 201. S/N: 556. The unit powers up. However, as we have not recently tested and calibrated the unit, it is sold as is. L573) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold ... moreas-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these criteria is not met, we reserve the right to withhold funds for an indefinite term until all requirements are met. If you feel that you have received an incorrect item, please retain the item and all packaging
Anatech Hummer 6.2 Cold Deposition/Etch Sputter Coater for SEM Samples
Anatech Hummer 6.2 Cold Deposition/Etch Sputter Coater for SEM Samples Inventory# 58565*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Cold Deposition/Etch Sputter Coater for SEM Samples. Manually controlled plating and processing. Integral timer. Does not include gold target material. Stage accommodates 3 in. substrate or 12 SEM stubs. Built-in pump. 115V. 60 Hz. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: ... morefor purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
C104124 Inficon XTM/2 Deposition Controller (m/n 758-500-G1)
C104124 Inficon XTM/2 Deposition Controller(m/n 758-500-G1) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C104124 This Inficon XTM/2 Deposition Controller(m/n 758-500-G1) looks to be in good cosmetic condition. Showing some minor signs of wear. It powers up, as shown in the photos above, and the digital display is bright and clear, and it responds to input from the buttons. It displays an error(Err 2) when it is first powered up, but I think that is just because nothing is hooked up to it. However, this is the extent of my testing of it, and it is being sold as-is. Approximate overall unpacked dimensions: 13"L x 9"W x 4"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As ... moreis and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 6.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypa
3D Printer Dimension Elite Stratasys FDM Machine Fused Deposition Modeling Nice
This is a very nice Dimension Elite 3D printer FDM Machine(Fused Deposition Modeling) Excellent condition. This is a high-end, professional-grade 3d printer. Bought in 2007. Used in a professional 3d printing environment always. The machine has been under maintenance plan with Stratasys and has been professionally maintained so it is always kept like new with replacement parts when needed. I just had it gone over by a certified tech to make sure it is in perfect condition. If you would like a sample part to verify quality please advise. More pics available upon request. Buyer is responsible for all pick-up and shipping/delivery costs. The Dimension Elite 3D Printer features the finest resolution of any Stratasys Design Series Performance 3D Printer. Driven by Fused Deposition Modeling(FDM) Technology. It prints in nine colors of real ABSplus ... morethermoplastic. For times when you don’t need the finest Dimension resolution of.178 mm(0.007 in. this 3D printer lets you speed up printing with a layer thicknesses of 0.254 mm(0.010 in. See more at: http:www.stratasys.com/3d-printers/design-series/performance/dimension-elite#sthash.C6C8fELg.dpuf Model material: ABS plus in nine colors. Support material: Soluble Build size: 203 x 203 x 305 mm(8 x 8 x 12 in. Layer thickness: 0.254 mm(0.010 in. or 0.178 mm(0.007 in. Workstation compatibility: Windows XP/Windows 7. Network connectivity: Ethernet TCP/IP 10/100 base T. Size and weight: 686 x 914 x 1041 mm(27 x 36 x 41 in. 136 kg(300 lbs. Power Requirements: Dimension Elite 3D Printer: 100–120 VAC 60 Hz. Minimum 15A dedicated circuit or 220–240 VAC 50/60 Hz, minimum 7A dedicated circuit, SCA-1200 support-removal system: 100-120 VAC. 15A, 60 Hz or 220-240 VAC, 10A, 50 Hz, Regulatory Compliance: Dimension Elite 3D Printer: CE/ETL, SCA-1200 Support Removal System: CE, Special Facility Requirements: None. See more at: http:www.stratasys.com/3d-printers/design-series/performance/dimension-elite#sthash.C6C8fELg.dpuf;1?RcmdId ViewItemDescV4,RlogId p4%60b