In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
900.00
Buy It Now
$37.95 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
$
19999.00
Buy It Now
Condition: Used
Location: Boyers, United States
We have a used Vacuum Thin Film Deposition System. It does not have a mfg. tag on it. I suppose it did at one time. It comes with all you see in the photos. ... moreInnotec E-Beam power supply EB-8 You get one of the small vacuum pumps on the pallet you see in my picture of pumps. We purchased this system as well as 2 others from a Gov't research lab. I have the other 2 listed in other auctions. Reach out to ask questions. We don't know the history of them. Sold as is where is. You are welcome to come in and inspect. Thank you for looking. Mike Tenney - Tenney Equipment Company
$
19999.00
Buy It Now
Condition: Used
Location: Boyers, United States
We have a used Vacuum Thin Film Deposition System. It does not have a mfg. tag on it. I suppose it did at one time. It comes with all you see in the photos. ... moreYou get one of the small vacuum pumps on the pallet you see in my picture of pumps. We purchased this system as well as 2 others from a Gov't research lab. I have the other 2 listed in other auctions. Reach out to ask questions. We don't know the history of them. Sold as is where is. You are welcome to come in and inspect. Thank you for looking. Mike Tenney - Tenney Equipment Company
$
4999.00
Buy It Now
Condition: Used
Location: Danville, United States
Small Plasma CVD system. Nice wide vacuum chamber with a water cooled copper antennae coil. Whole system is setup for 220V 1 phase.
$
250.00
Buy It Now
$15.07 Shipping
Condition: Used
Location: Linwood, United States
Inficon Crystal Interface Unit 757-302-G1 with cables. For use with Inficon Thin Film Deposition Monitors.
$
11000.00
Buy It Now
Condition: For parts or not working
Location: Freehold, United States
There are 4 deposition sources in the chamber. The chamber also includes an Ulvac Cryopump and compressor. Chamber is being sold as is where is, we cannot ... moretest this item.
$
4900.00
Buy It Now
$399.79 Shipping
Condition: New
Location: Aurora, United States
Condition is New. All ports made of CF flanges except chamber front door sealed via dovetail groove & O-ring. Chamber Body Manufactured from 304 Stainless ... moreSteel Plates. Chamber top has two CF1.33” flanges for shutters & CF 2 ¾ “flange for motion.
$
895.00
Buy It Now
$14.00 Shipping
Condition: Used
Location: Sarasota, United States
High Vacuum Crystal Dual Head Feedthrough. That being said, we are not perfect, nor are we experts on anything.
$
9603.00
Buy It Now
$700.00 Shipping
Condition: Used
Location: Ventura, United States
Click here to see description.
$
3950.00
Buy It Now
Condition: Used
Location: Freehold, United States
The Polycold Fast Cycle Water Vapor Cryochillers (PFC) effectively captures water vapor, which comprises 65% to 95% of the residual gas in high-vacuum ... moresystems. Water vapor is typically the most reactive contaminant present.
$
115000.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
Capable of sequential and simultaneous deposition of up to two targets at once. Substrates are loaded automatically by the load lock robot. Manual operation ... morealso available. RF Plasma Cleaning for conditioning substrates prior to deposition.
$
14999.00
Buy It Now
Condition: Used
Location: Boyers, United States
We have a used Vacuum Thin Film Deposition System. It does not have a mfg. tag on it. I suppose it did at one time. It comes with all you see in the photos. ... moreYou get one of the small vacuum pumps on the pallet you see in my picture of pumps. We purchased this system as well as 2 others from a Gov't research lab. I have the other 2 listed in other auctions. Reach out to ask questions. We don't know the history of them. Sold as is where is. You are welcome to come in and inspect. Thank you for looking. Mike Tenney - Tenney Equipment Company
$
11000.00
Buy It Now
Condition: For parts or not working
Location: Freehold, United States
There are 10 deposition sources in the chamber. This chamber was designated Organic Chamber. The chamber also includes an Ulvac Cryopump and compressor. ... moreChamber is being sold as is where is, we cannot test this item.
$
2450.00
Buy It Now
$73.16 Shipping
Condition: Used
Location: Saint Petersburg, United States
As seen in the photos the top chimney is not present, but depending on your application you may not need it. If you do, it is available from lesker as ... morea spare item.
$
550.00
Buy It Now
$37.95 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
$
350.00
Buy It Now
$24.75 Shipping
Condition: Used
Location: Saint Petersburg, United States
Not 100% sure what this guy is. it looks like it's used to bring cryogenic temp gasses into the chamber.
$
1779.68
Buy It Now
$750.00 Shipping
Condition: For parts or not working
Location: Rancho Cordova, United States
Unit powered on, but there was no response from the unit. for this reason, we are selling the unit AS-IS for parts/repair as a non-working or incomplete ... moreunit. We have not tested / inspected any further, item may have unknown issues we are not aware of. Item does appear to have missing parts/components, please review pictures closely. See all item photos for the condition of the unit. Unit includes CHA Industries Auto-Tech II as pictured, nothing else included. Unless pictured, no power adapter / power cable included The unit is on hand and ready to ship.
$
79000.00
Buy It Now
Condition: Used
Location: San Diego, United States
This custom designed and built sputtering system allows multiple horizontally oriented sputtering sources (8 or more) installed on the vacuum chamber ... morefor various sputtering applications. The system can be used for other purposes which may need an enclosed space in vacuum or gas ambient.
$
149500.00
Buy It Now
Condition: Used
Location: Santa Barbara, United States
It can be used for full-color device production, a difficult application for Solciet. It has a 7-sided transfer chamber, and can support 2 to 4 organic ... moredeposition chambers as needed. WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, OPENED OR DISASSEMBLED.
$
7995.00
Buy It Now
Condition: Used
Location: Austin, United States
(Nine (9) Very Good Condition 2” Sputter Targets (1/4” Thick: Cu-Copper, W-Tungsten, ITO-Indium Tin Oxide, Si-Silicon, Ti-Titanium, CuO-Cupric Oxide, ... moreZn-Zinc, Ti/Ta 95% Titanium / 5% Tantalum), Al-Aluminum).
$
249.00
Buy It Now
Free Shipping
Condition: Used
Location: Austin, United States
$
5500.00
Buy It Now
$59.89 Shipping
Condition: New
Location: Saint Petersburg, United States
$
8950.00
Buy It Now
Condition: Used
Location: Freehold, United States
Vacuum chamber previously used on a cluster tool producing OLED modules. Inside of chamber is 30"W x 30"D x 34"H. There are currently three deposition ... moresources wired inside the chamber. the chamber.
$
2500.00
Buy It Now
Condition: Used
Location: Freehold, United States
The Polycold Fast Cycle Water Vapor Cryochillers (PFC) effectively captures water vapor, which comprises 65% to 95% of the residual gas in high-vacuum ... moresystems. Water vapor is typically the most reactive contaminant present.
$
52430.00
Buy It Now
Condition: Used
Location: Freehold, United States
CHA SE-600- High Vacuum E Beam Evaporation System Inventory# 57550*Before purchasing this system. Please note that the refurbishment process does not ... morebegin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. PVD physical vapor deposition system. 19 in. dia. water cooled bell jar. Triple dome planetary fixturing currently configured for 3 in. dia. wafers. Inficon IC6000 crystal deposition rate monitor. Automatic valve sequencer. Four pocket E-gun with manual rotation control. Does not have auto pocket sequencer. Manual only. Temescal CV-8 E-Beam power supply with controls. System uses a Varian VHS-6 diffusion pump for high vacuum. Roughing pump included. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
$
12500.00
Buy It Now
Condition: Used
Location: Long Beach, United States
$
600.00
Buy It Now
$17.23 Shipping
Condition: Used
Location: Linwood, United States
Inficon XTM/2 Thin Film Deposition Monitor 758-500-G1 with Crystal Interface Unit 757-302-G1.
$
750.00
Buy It Now
$17.61 Shipping
Condition: Used
Location: Ventura, United States
$
800.00
Buy It Now
$69.25 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
$
150.00
Buy It Now
$18.40 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
$
1200.00
Buy It Now
$30.70 Shipping
Condition: New
Location: Saint Petersburg, United States
$
9500.00
Buy It Now
Condition: Used
Location: Long Beach, United States
$
59000.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
Silicon monoxide (SiO, Silicon (II) Oxide) films to provide an antireflective coating. Chamber size 18" x 23" x 36" inside. for backside analysis. Inventory ... moreNo. 64580.
$
14500.00
Buy It Now
Condition: Used
Location: Long Beach, United States
$
89599.00
Buy It Now
Condition: Used
Location: Santa Barbara, United States
Sputter deposition is achieved by bombarding a source material with energetic ions, typically Ar+. Atoms at the surface of the target are knocked loose, ... moreand transported to the surface of the substrate, where deposition occurs.
$
11000.00
Buy It Now
Condition: For parts or not working
Location: Freehold, United States
There are 10 deposition sources in the chamber. This chamber was designated Organic Chamber. The chamber also includes an Ulvac Cryopump and compressor. ... moreChamber is being sold as is where is, we cannot test this item.
$
124.99
Buy It Now
$8.70 Shipping
Condition: New
Location: Silver Spring, United States
Typically used for vapor deposition of SiO or ZnS. New in sealed bag.
$
850.00
Buy It Now
$13.79 Shipping
Condition: New – Open box
Location: Santa Barbara, United States
Not sure whether borosilicate glass or quartz. See pictures for more detail. Material: Borosilicate Glass or Quartz. LIMITED WARRANTY.
$
7500.00
Buy It Now
$191.30 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
The heated deposition platform is roughly 9x12". No worries there, just slide it over.
$
950.00
Buy It Now
$149.62 Shipping
Condition: Seller refurbished
Location: Saint Petersburg, United States
$
3950.00
Buy It Now
Condition: Used
Location: Fountain Valley, United States
$
139.00
Buy It Now
$87.09 Shipping
Condition: For parts or not working
Location: Gainesville, United States
(Set of 3): Silicon Wafer Semiconductor CVD Processing Turret Stainless Steel Rotisserie Apparatus, Machine, Processor. Three units, sold as one set. ... moreTwo appear to have CVD deposition heads (maybe that's what they are).
$
5500.00
Buy It Now
$70.35 Shipping
Condition: New – Open box
Location: Morgan Hill, United States
Cover, Cable With Sensor For Thin Film Deposition EquipmentCondition: New. We didn’t test it. We sell it at as is, where is without warranty.Return policy: ... more30 days. Buyer is responsible for shipping.Location: DA10-1-2
$
426.94
Buy It Now
$64.07 Shipping
Condition: For parts or not working
Location: Las Vegas, United States
A signed credit card authorization form is required for all orders paid with credit card. We directly accept US issued credit cards.
$
45.00
Buy It Now
$22.95 Shipping
Condition: Used
Location: Mc Grann, United States
This auction is for a CVD deposition chamber. The top port is ISO 320- I have adapters that will take this to 8" conflat if you prefer. The bottom ... moreport is ISO 250 and is extra thick to allow drilling for sample stage fixturing. The chamber has(2) ISO 100. 2) KF 50 and(2) KF 40 accessory ports. There is a 5 1/4" by 1" rectangular port with load lock for sample entry. Gas shower ID is 8" and is plumbed to a single 1/4" VCR port on the outside of the chamber. This unit can be UPSed in 2 boxes but the ebay shipping wizard is not configured for that. I have set the shipping to freight and will pack and ship via ups for actual cost.
$
120.00
Buy It Now
$43.38 Shipping
Condition: New – Open box
Location: Morgan Hill, United States
Vacuum Tubes For Thin Film Deposition EquipmentCondition: New. We didn’t test it. We sell it at as is, where is without warranty.Return policy: 30 days. ... moreBuyer is responsible for shipping.Location: DA10-1-3-@2
$
120.00
Buy It Now
$10.40 Shipping
Condition: New
Location: San Jose, United States
Categories: niobium, Nb, sputter targets, sputtering targets, physical vapor deposition, deposition materials, thin film, PVD.
$
2900.00
Buy It Now
$38.91 Shipping
Condition: Used
Location: Morgan Hill, United States
Vacuum Structure With Bayside NE23-050-LB and Superior electric M062-FF-206E For Thin Film Deposition EquipmentCondition: Used, We didn’t test it. We ... moresell it at as is, where is without warranty.Return policy: 30 days. Buyer is responsible for shipping.Location: DA10-1-3-@5
$
43794.99
Buy It Now
Condition: Seller refurbished
Location: North Billerica, United States
TEMESCAL- BJD-1800 E-Beam Vacuum Deposition System Inventory# 57141*Before purchasing this system. Please note that the refurbishment process does not ... morebegin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. Bell jar style E-Beam evaporator. 6 pocket e-gun with source selector. Temescal Simba E-Beam power supply with power and sweep controls. Inficon IC6000 crystal deposition rate monitor(can be upgraded to newer model at additional cost) Quartz lamp substrate heaters Single lift off dome with rotation control. CTI-8 cryopump with compressor and roughing pump. 208V. 3Ph, 60 Hz. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
$
1500.00
Buy It Now
$43.38 Shipping
Condition: Used
Location: Morgan Hill, United States
Plastic Cylinder For High Vacuum Component For Thinfilm Deposition Equip PartCondition: Used. We didn’t test it. We sell it at as is, where is without ... morewarranty.Return policy: 30 days. Buyer is responsible for shipping.Location: DA10-1-2
$
225.00
Buy It Now
$10.40 Shipping
Condition: New
Location: San Jose, United States
We have several In 4N-5N purity (99.99% to 99.999% pure indium) sputtering targets available.
$
105.00
Buy It Now
$10.40 Shipping
Condition: New
Location: San Jose, United States
Categories: zinc, Zn, Sputter target, sputter targets, sputtering targets, physical vapor deposition, deposition material, deposition materials. Certification ... moreof analysis provided.
$
120.00
Buy It Now
$38.91 Shipping
Condition: Used
Location: Morgan Hill, United States
Vacuum Flange For Thin Film Deposition EquipmentCondition: New. We didn’t test it. We sell it at as is, where is without warranty.Return policy: 30 days. ... moreBuyer is responsible for shipping.Location: DA10-1-3-@3
$
80.00
Buy It Now
$10.40 Shipping
Condition: New
Location: San Jose, United States
Categories: zinc, Zn, Sputter target, sputter targets, sputtering targets, physical vapor deposition, deposition material, deposition materials.
$
600.00
Buy It Now
$14.62 Shipping
Condition: New – Open box
Location: Santa Barbara, United States
Material: Teflon. Weight: 3 Lb. LIMITED WARRANTY. Height: 2 1/2". Thickness: 3/4".
$
195.00
Buy It Now
$10.40 Shipping
Condition: New
Location: San Jose, United States
Ta sputtering target, physical vapor deposition, deposition material, PVD material, evaportation material, sputtering cathode.
$
135.00
Buy It Now
$10.40 Shipping
Condition: New
Location: San Jose, United States
We have a few SiO2 at 4N5 purity (99.995% pure quartz) sputter targets.
$
163.18
Buy It Now
Free Shipping
Condition: Used
Location: Saint Paul, United States
$
1997.00
Buy It Now
$178.00 Shipping
Condition: New – Open box
Location: Singapore
0084470206 Rev. 3 Heater Instl KT 95mm 200 Lean New assy. 0084310702 Rev 2. 0084470206 Rev. 3. 0084310702 Rev 2. Intevac vacuum system division. Heater ... moreInstl KT. Vacuum System. Industrial Single Board Computers.
$
3997.00
Buy It Now
$459.00 Shipping
Condition: New – Open box
Location: Singapore
Intevac vacuum system division. Weldmant Exhaust Manifold Cal weld. Industrial Single Board Computers. Vacuum System.
1 2
 In 

Former Listings  
 
12.5" ID 14.5" deep chamber set up for CVD vacuum deposition with gas shower
This auction is for a CVD deposition chamber. The top port is ISO 320- I have adapters that will take this to 8" conflat if you prefer. The bottom port is ISO 250 and is extra thick to allow drilling for sample stage fixturing. The chamber has(2) ISO 100. 2) KF 50 and(2) KF 40 accessory ports. There is a 5 1/4" by 1" rectangular port with load lock for sample entry. Gas shower ID is 8" and is plumbed to a single 1/4" VCR port on the outside of the chamber. This unit can be UPSed in 2 boxes but the ebay shipping wizard is not configured for that. I have set the shipping to freight and will pack and ship via ups for actual cost.
INFICON Model 321 Film Thickness Monitor for Vacuum Deposition
Description: INFICON Model 321 Film Thickness Monitor for Vacuum Deposition This item has been in inventory storage for some time. It has been declared surplus so it is being offered at a bargain price. It was tested by power up and to demonstrate that the controls work. We do not have the capability to perform additional tests so the item is sold as is. TERMS And Conditions WE WISH TO MAKE CLEAR TO POTENTIAL BUYERS THAT ALL ITEMS. NEW AND USED, ARE SOLD AS/IS. We do our best to describe each item accurately, pointing out any known flaws. It is the responsibility of the buyer to thoroughly read the description and to look at all the pictures. We welcome any and all questions and will try to RESPOND CLEARLY AND PROMPTLY. Ultimately, we want our buyers to be educated and HAPPY with their purchase(s) ACCEPTED PAYMENT METHODS: per ebay rules. ... moreWe only accept PayPal payments. for some items. We will allow local pick-up. Please inquire. CASH ONLY for local pick-up. PAYMENT MUST BE MADE WITHIN FIVE(5) DAYS AFTER THE END OF AUCTION OR SALE. WE RESERVE THE RIGHT TO REFUND PAYMENTS FROM CUSTOMERS THAT ARE NOT COVERED BY THE PAYPAL SELLER PROTECTION POLICY. CONFIRMED ADDRESSES ONLY. PLEASE INQUIRE IF YOU HAVE ANY QUESTIONS. SHIPPING DETAILS for u.s. shipping we use either fedex ground or usps. WE WILL ONLY SHIP TO THE ADDRESS LISTED ON THE PAYPAL PAYMENT PAGE. our u.s. FLAT SHIPPING RATES ONLY APPLY TO THE 48 CONTIGUOUS STATES. Additional rates may apply to PO boxes. Hawaii and alaska. PLEASE INQUIRE if the actual shipping/handling cost is less than the quoted price in the listing. We will refund the difference. we are not in the business of trying to profit from excessive shipping charges. international shipping is usps international express. USPS International priority or fedex. PLEASE INQU
PVI STAINLESS STEEL HIGH VACUUM CHAMBER CHEMICAL VAPOR SPUTTERING DEPOSITION
PVI STAINLESS STEEL HIGH VACUUM CHAMBER IN LINE CHEMICAL VAPOR SPUTTERING DEPOSITION A local company contracted out the construction of this item to PVI System Technology. Of Oxnard, California. PVI is a System Engineering& Manufacturing company specializing in High Vacuum and Thermal Process Technologies. Since 1981. PVI Engineers& Technical Staff have successfully designed& manufactured a wide variety of Automated Vacuum Processing Systems for the Photovoltaic, Flat Panel Display, Semiconductor, Aerospace, High Purity Material& other challenging industries. Background/ History. This unit is one of eight(8) main components that comprised a very sophistocated Chemical Vapor Sputtering Deposition Process Line. Which previous owners engineered, designed and had custom fabricated for them. PVI System Technology was the company ... morecontracted to manufacture these main line of components. Previous owners went into great detail when explaining to us how much time. Money and tedious effort went into this project of theirs, not to mention the remarkable fact that this this Deposition Line, once completed, never saw more than FOUR HOURS OF TOTAL USAGE in production! The specifics and technical terminology was actually"Greek" to us lamen, but we got the jist of just how elaborate and involved this whole set-up actually was after researching much of the other components in the line. Fortunately, for the prospective bidders out there in eBay land who might be in the market for some of these components, this short-lived Deposition Line has been dismantled for individual resale of its MANY components. As with all the other components that came off of this line. The general, overall condition of this item clearly does reflect the previous owner's claim of VERY low usage to be quite accurate. Features And Specifications: Overall Dimensions- 10 5/8" x 25 1/4" x 37 1/2" long. Internal Conveyor Chamber measures 7 1/2" x 22" Chain Drive Roller/ Conveyor Assemblies introduced Glass S
Pelco 9500 PAC-1 Advanced Coater Vacuum Deposition
You are bidding on a Pelco 9500 PAC-1 Advanced Coater. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. We accept returns if specified in the Return Policy otherwise they are sold as is with no return. We will refund or exchange an item after it is returned and the shipping paid by the buyer. We ship using FedEx. UPS or other requested agents but not the USPS. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
Balzers BAK 550 Vacuum Deposition Chamber, Serial # 2166
You are bidding on a Balzers BAK 550 chamber. Serial# 2166. This is a bare chamber with no pumps. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. Our preferred carrier is FedEx. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
NRC Varian 703 Thermal Vacuum Deposition System
You are bidding on a NRC Varian thermal vacuum deposition system which is being sold as is. As pictured. Weight: 1.200 lbs. Shipping dimensions: 48" x 78" x 60" 18" x 26" stainless steel bell jar with 4" view port, 110V hoist, Stainless steel base plate with: 2 current feedthroughs, 2 rotary motion feedthroughs, 13 1 inch ports total with half blanked off, 6" ASA gate valve with integrated liquid nitrogen trap, Transformer, Click on images for a larger view. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. Our preferred carrier is FedEx. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
Airco Temescal CV-8-110 Electron Beam Vacuum Deposition Power Supply XYS-8 Sweep
Airco Temescal CV-8-110 Electron Beam Vacuum Deposition Power Supply XYS-8 Sweep Description Airco Temescal CV-8-110 Electron Beam Vacuum Deposition Power Supply with XYS-8 Sweep Control This item requires freight shipping. Please contact us for a quote prior to purchasing. Manufacturer Airco Temescal Manufacturer Part Number CV-8-110 Item/Ship Weight 810 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory ... moreor part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item may require palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 44803 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qual
Airco Temescal Model CV-8 Electron Beam Vacuum Deposition Power Supply
Up for sale is an Airco Temescal Model CV-8 Electron Beam Vacuum Deposition Power Supply. As you can see from the pictures. This system is in nice, clean condition with minimal wear. This unit was recently removed from a university lab but, because I lack the wiring to plug this unit in, I have not been able to test it, sold"As-is" LOW opening bid, don't miss out! Feel free to email me with any questions. Thanks for looking and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Stainless steel dome for 20 samples, 2” diameter vacuum deposition L455
A stainless steel 11” vacuum holder dome for vacuum depositions of 20 samples. 2” diameter each(L455) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. ... morePlease ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these criteria is not met, we reserve the right to withhold funds for an indefinite term until all requirements are met. If you feel that you have received an incorrect item, please retain the item and all packaging materials and notify us ASAP. A Returned Merchandise Authorization(RMA) is required for all retur
CHA SS-600-RAP Thermal Vacuum Deposition System
You are bidding on a CHA thermal vacuum deposition system which is being sold as is. As pictured. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. Our preferred carrier is FedEx. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702
Anatech CDS-II Carbon Deposition System w/ Welch 1.5 Vacuum Pump
Just in from a local aerospace company sale comes this surplus Anatech CDS-II Carbon Deposition System w/ Welch 1.5 Vacuum Pump. Powers on and vacuum Pump working, not tested past power on, did not come with any manuals or anything not shown All items with power cords are tested for simple power on only. It is presumed good( unless otherwise noted) but sold as shown and as-is. Paypal due immediately/ Local Pick-up available 8am-12noon weekdays from 91355/ CA sales tax required. WE SHIP FAST! Location/ Rolling plastic cart
Complete High Vacuum Optical Coating / Deposition System
This is a complete bell jar vacuum coating system. The system is a product of Optical Film Engineering Co. Phila 33 PA) The chamber is 12+inches in diameter and height. It has 6 electric feed thru leads. And one rotary shaft. It uses both a mechinal main pump and a diffusion pump. Has built in power supply for filament heating. This unit has been under vacuum for years without use. It is a my backup unit, but I have not needed it in more that 7 years, so it is time to sell. It was used for aluminum coating. Local Pickup preferred. If shipped a packaging charge will be charged. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ef485191f-0x108-
Complete High Vacuum Bell Jar Evaporator Optical Coating / Deposition System
This is a complete bell jar vacu um Evaporator coating system. The system is a product of Optical Film Engineering Co. Phila 33 PA) The chamber is 12+inches in diameter and height. It has 6 el ectric feed thru leads. And one rotary shaft. It uses both a mechinal main pump and a diffusion pump. Has built in power supply for filament heating. This unit has been under vacuum for years without use. It is a my backup unit, but I have not needed it in more that 7 years, so it is time to sell. It was used for aluminum coating. Local Pickup preferred. If shipped a packaging charge will be charged.
Interlocked vacuum chambers for deposition on 2ft.*4 ft. plates
Modular interlocked vacuum chambers by Mill Lane C corporation suitable for treatment and/or thin film deposition on glass plates as big as 2ft.4ft. No instrumentation; no pumps. Just the three chambers. The plates can be brought in and out of the system without breaking the vacuum in the middle chamber. Reduced price by $5.000 to $14,000.
PVI STAINLESS STEEL HIGH VACUUM CHEMICAL VAPOR SHOWER DEPOSITION CHAMBER
PVI STAINLESS STEEL HIGH VACUUM CHEMICAL VAPOR SHOWER DEPOSITION CHAMBER This is the second component of the eight(or so) main chamber components which were all part of a very sophistocated Chemical Vapor Sputtering Deposition Process Line. A local company contracted the construction of these main High Vacuum Chamber components to a company called PVI System Technology. Of Oxnard, California. PVI is a System Engineering& Manufacturing company specializing in High Vacuum and Thermal Process Technologies. Since 1981. PVI Engineers& Technical Staff have successfully designed& manufactured a wide variety of Automated Vacuum Processing Systems for the Photovoltaic, Flat Panel Display, Semiconductor, Aerospace, High Purity Material& other challenging industries. Background/ History Previous owners went into great detail when explaining ... moreto us how much time. Money and tedious effort went into this project of theirs, not to mention the remarkable fact that this this Deposition Line, once completed, never saw more than FOUR HOURS OF TOTAL USAGE in production! The specifics and technical terminology was actually"Greek" to us lamen, but we got the jist of just how elaborate and involved this whole set-up actually was after researching many of the other components taken from the line. Fortunately, for the prospective bidders out there in eBay land who might be in the market for some of these components, this short-lived Deposition Line has been dismantled for individual resale of its MANY components. As with all the other components that came off of this line. The general, overall condition of this item clearly does reflect the previous owner's claim of VERY low usage to be quite accurate. Function This set-up was processing Glass Substrate Plates. Before entering this particular chamber. Glass Substrates were conveyed through a Pre-Heating Chamber in groups of three, where they would be pre-heated up to a temperature of 160°C to 170°C. Next. The chain driven conveyor would pass the Sub
NRC 3114 Vacuum Coater Deposition system Evaporator Chamber Diffusion Pump
This auction is for an NRC 3114 Vacuum Coater. This unit was pulled from storage at a local university and is in unknown working condition. Everything included is pictured in this listing but it is obviously missing pieces. Use for parts or build it back up! Glass Chamber is still completely intact and measures 13.5" in dia. interior dimension) Feel free to email me with any questions. Thanks for looking and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
CHA SEC 1000-32 High Vacuum Thin Film Deposition System (E-beam Gun)
CHA SEC 1000-32 High Vacuum Thin Film Deposition System with the following features& equipment: 32inch Diameter Stainless Steel Water Cooled Bell Jar Vacuum Chamber CTI-10 Cryopump and Compressor. And Edwards E2M Direct Drive Mechanical Pump CHA Auto Tech II System Valve Controller with Auto Bell Jar Hoist Option CHA Cryopump Regeneration Controller Granville Phillips 307 Dual Ionization Vacuum Pressure Gauge Controller CHA Substrate Heater(8KW) Power Supply. And CHA Thermal Resistance Deposition Source Substrate Quartz Lamp Heater Assemblies& Heater Temperature Controller CHA 5KVA Thermal Resistance Deposition Power Supply Temescal four(4) Pocket Electron Beam Gun Deposition Source CHA SR-10. 10KW Electron Beam Gun Power Supply with XY e-beam Sweep Control Inficon IC-5 Thin Film Deposition Process Controller(2each) Inficon Dual Crystal ... moreDeposition Thickness Sensor Heads- for Ebeam Source& Thermal Resistance Source Flat Plate Substrate Fixture(4 Holders) with Dual Axis Rotation& Substrate Rotation Speed Controller 2 3/4 inch Conflate Port for RGA Instrument. Buyer is responsible for all shipping charges and arrangements. Including Crating Fees. This is a very large unit, please call if you have any questions: 925)447-9136. Click here to browse my ebay store.
Inficon 31 Film Thickness Monitor for Vacuum Deposition L314
Used Inficon 321 Film Thickness Monitor. S/N: 15-0066. 115V, 50/60 Hz. The device powers up, but we have not fully tested and calibrated the unit and it is sold as is. L314) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty ... moreor guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these criteria is not met, we reserve the right to withhold funds for an indefinite term until all requirements are met. If you feel that you have received an incorrect item, please retain the item and all packaging materials and notify us AS
CHA SEC-600-RAP High Vacuum E-Beam Evaporator Deposition System
CHA- SEC-600-RAP High Vacuum E-Beam Evaporator Deposition System Inventory# 57377*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. Electron beam deposition system. Inficon IC5 crystal deposition rate monitor. CHA SR-10 E-Beam power supply with gun and sweep controls. Six pocket E-Gun with manual rotation control. Currently configured with single lift off dome for 3 in. wafers. Fixture rotation controls. Has controller for quartz heaters but none installed. 19 in. dia. stainless steel water cooled bell jar. Manual or automatic vacuum valve sequencing. CTI cryopump with compressor and roughing pump. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, ... morewith our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
Denton Vacuum BTT-IV Benchtop Turbo IV High Vacuum Evaporation Deposition System
DENTON VACUUM- BTT-IV Benchtop Turbo IV High Vacuum Evaporation System. Inventory# 57577*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. Compact turbo pumped dual source thermal evaporator fits on desktop. Two resistive thermal evaporation sources. Quartz 12 in. dia. x 18 in. H bell jar. Compound turbo molecular pump. Turbo rebuilt by manufacturer Dec. 2012. Built-in roughing pump. Touch screen interface to PLC provides full control. 208V. 1 Ph, 50/60 Hz, 20A. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional ... moreinformation on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
Denton Vacuum Desk II Sputter Deposition Coater Scanning Electron Microscopy
Search our eBay Store! Denton Vacuum Desk II Sputter Deposition Coater Scanning Electron Microscopy SKU: JV-MAT-A-DENTONDESKII Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Denton Vacuum Desk II Sputter Deposition Coater Scanning Electron Microscopy Model: Desk II Physical Condition: Good. Minor scuffs/scratches/sticker residue and signs of use. Functionality/Degree of Testing: Unit powers on with indicator lights. We do not have the necessary resources to further test this unit. Power cable is not included. Dimensions(L" x W" x H" 13*21*15.5 THE FDA DISCLAIMER BELOW IS ONLY FOR ... moreMEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfie
Varian Vacuum 989-0900 Thin Film Deposition Thickness Monitor L313
Used Varian 989-0900 Film Thickness Monitor for Film Vacuum Deposition. S/N: 0017. The device starts up, but we have not fully tested and calibrated the unit and it is sold as is.L313) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, ... morewithout warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these criteria is not met, we reserve the right to withhold funds for an indefinite term until all requirements are met. If you feel that you have received an incorrect item, please retain the item and all packaging materials and n
Inficon Thin Film Thickness Control for Vacuum Deposition L315
Used Inficon XTM Film Thickness Monitor Controller 120/240V for 2 monitoring gauges during Vacuum deposition. The device powers up. But we have not fully tested and calibrated the unit and it is sold as is. L315) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items ... moreare sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these criteria is not met, we reserve the right to withhold funds for an indefinite term until all requirements are met. If you feel that you have received an incorrect item, please retain the item and a
EMPTY PRECURSOR CONTAINER FOR VACUUM CHEMICAL VAPOR DEPOSITION BIN-PMEL
EMPTY PRECURSOR CONTAINER FOR VACUUM CHEMICAL VAPOR DEPOSITION BIN-PMEL Sold as is. As pictured. Thanks. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1430aaa2ec0-0xff-
High Vacuum E-Beam Evaporator Deposition System Top Hat Thin Films Coater
High Vacuum Deposition Chamber that we used for many years in our production process. It is sold as you see it in the photos. If it is not pictured you are safe to assume it is not included. Local pickup only but it is already on the loading dock and ready to be loaded onto your truck. You will need a box truck or tractor trailer. We do not have the ability to lower it down into your pickup truck.
Thin-Film Vacuum Deposition System, rf Magnetron Sputter Coater, Turbo Pump, ++
For Sale Custom Built rf Magnetron High-Vacuum Sputter Deposition System This rf Magnetron Thin-Film Vacuum Deposition System is Comprised of a Cooke CVE 301 AC-X Vacuum Vessel and Pressure Control Apparatus PLUS the Supporting Electrical Equipment for Monitoring and System Regulation plus all Vacuum Hardware shown including: 1. Cooke Vacuum Products(Norwalk CT) Ultra-High Vacuum Test and Measurement Vessel and Vacuum Control System Model# CVE-301 AC-X. Includes Vacuum Monitoring and Control Panel Housed on All-Steel. Wheeled-Cart. Custom Made. Electrical Motor and Hoist for Opening and Closing Vacuum Vessel. 2. Applied Thermal Control Model Recirculating Chiller. 3. Leybold Trivac Roughing Pump. Mod. D8A. Cat. 898020, Ser. 1289226609. 4. Six(6) Very Good Condition 2” Sputter Targets(1/4” Thick: Cu. W, ITO, Si—1/8” Thick: Cr, Al) 5. Tektronix ... moreTDS 380: 400 MHz. 2 GS/s, 2-Channel Digital Real-Time Oscilloscope. Ser. B012392, Instr. TDS380. Includes One TEK Model P5100 100x. 2500 V Peak Probe. 6. ENI Power Systems Inc. Rochester NY) rf Plasma Generator. Mod. OEM-12. Ser. 321. 7. MCS-Mercator Control Systems(Santa Ana CA)rf Tuner. Mod. ATN1050D. Ser. 4849088, Part# 101-0482B. 8. Bertran(Hicksville NY) Series 105(Mod. 02R) 1kW High-Voltage Power Supply. Ser. 5025. 9. U.S. Meivac Magnetron. 2” Sputter Gun. 10. Balzers(Pfeiffer) TMH-065 Turbo Pump BN63ISO-K. Mod. PM P02 350. Ser. 1230135. 11. Operators Data Log Book and Component Equipment Instruction Manuals You are bidding on exactly what is shown in the pictures. This is for all the components shown on this rf Magnetron Sputter Thin-Film Vacuum Coating System. This Unit is Currently Fully Set Up and Ready to Go. Everything needed at one low price! Ask about any details in the system or it’s components. Feel free to inquire about any other details concerning this item for sale. I can take more pictures that I am happy to send if needed for a full evaluation. I obtained all of this scientific and other gear from a large acquisition at Thomson C
Anelva/Canon High Volume SPF710H Sputtering Vacuum System Metal Deposition L138
Used Anelva/Canon SPF710H Sputtering System Including: SPF-710H Instruction Manual. 922-9252 Pumping Controller, MIG-820 Wide, Range Ionization Gauge Operation Manual, PRF-503 RF Generator, OF Gauge Selector, Diffusion Pump Forepressure Controller, 2” Pneumatic Valve, Heating Power Controller with a temperature controller, 2033/2063 Alcatel Mechanical Rotary Pump, CDP-2400/3700 Oil Diffusion Pump, Vacuum Breaker(M.P. Vent Valve) Bridge Type Main Valve, BN86-E, NB-86S Flow Switch, Gas Feed Valve Controller, MTG-012 Thermocouple Vacuum Gauge, CMS-301 Orifice Controller and CMS-201 Flow Controller/CMS-221 Mass Flow Meter. 922-953 Power Supply: 220 V/ 3 Phase/ 40A. Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or ... moreother items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(wh
Balzers Swiss High Vacuum Stainless Steel Deposition Box Coater System L595
Used Balzers Switzerland High Vacuum Stainless Steel Deposition Chamber System with Swing Open Access Heavy Door and 6” View Glass Port at the Center of the Door. Internal Chambers Deposition Dimensions are: 15.5” x 19” x 12” W. H, D) The chamber has the following additional ports: three(3) easy open 5” Diameter Ports and Four(4) 2.25” Diameter Conflat Ports and Many Feed-Through Ports for Gauges and Electrodes Supply. The system also includes the following electronic supply and Control System units: Balzers BSP104 Pumping Unit Control, S/N: 323. Balzers BSV202, 2 evaporation power supplies(up to 10A) + Glow Discharge Unit, S/N: 261. Balzers QSG201 Quartz Crystal Thin Film Monitor Unit, S/N: 805 Balzer EVM 052 High Voltage Control Unit upto 300 mA, 2500V, S/N: 195. The pumping system consists of: Balzers 4” Diffusion 900 Pump, S/N: 806, and ... moreBBC Brown Boveri MEPA100 Rotary Pump, S/N: 2177950. The Total Dimensions of the System are: 58” x 31.5” x 68” W, D, H) The system was used in the past for microtome and includes the following units(free of charge) Balzers BMP101 Microtome Movement Balzers BCM101 Commutator Unit. Additionally, inside the chamber it includes many vacuum holders and gadgets, which can be removed. The system is very clean and in excellent condition and it was pumped down to the 10-7 scale. However, as we have no way of testing and calibrating the system it is sold as is. L595) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items,
Inficon Leybold-Heraeus IC-6000 Thin Film Vacuum Deposition Controller IC 6000
Inficon Leybold-Heraeus IC-6000 Thin Film Vacuum Deposition Controller IC 6000 Inficon Leybold-Heraeus IC-6000 Thin Film Vacuum Deposition Controller IC 6000 Details: Manufacturer: Inficon Leybold-Heraeus Model: IC-6000 Includes S/S-1& I/O-1 cards. As pictured. Condition: Good cosmetic condition with some signs of previous use(See photos for more detail) Tested: Unit was removed from a working environment. Tested for power on only. Warranty: 14-Day Right-of-Return SKU: SKU] Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. ... morePlace a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax form is provided for our records. We cannot process the order until we receive sales tax or a copy of your CA. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment. Or warranty
Leybold Inficon IC 6000 Thin-Film Vacuum Deposition Controller 013-075
Search our eBay Store! Leybold Inficon IC 6000 Thin-Film Vacuum Deposition Controller 013-075 SKU: JV-MAT-A-INFICONIC075 Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Leybold Inficon IC 6000 Thin-Film Vacuum Deposition Controller 013-075 Model: 013-075 Dimensions(L”xW”xH” 18.5*19*5.25 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or ... morebetter condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET MANAGEMENT. INC. 1096 PECTEN CT MILPITAS. CA 95035 Open Monday through Fr
High vacuum chambers interlocked. For the treatment/deposition on large plates.
Modular interlocked vacuum chambers made by Mill Lane corporation suitable for treatment and/or thin film deposition on glass plates as big as 2ft.4ft. No instrumentation; no pumps. Just the three chambers. The parts to be treated can be brought in and out of the system without breaking the vacuum in the middle chamber. The tird chamber has a gated port of 11.5 inch diameter. The top of each chamber lifts hydraulically. The plates are moved by a step be step system which have no seals. We will sell the system all together or separated chambers. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1447bd90967-0x10a-
GE RESEARCH GENERAL ELECTRIC VACUUM DEPOSITION NICHROME RESISTIVE FILMS
THIS AUCTION IS FOR THE PICTURED BOOKLET FROM GENERAL ELECTRIC COMPANY RESEARCH LABORATORY SCHENECTADY NY DATE AND TITLE AS LISTED VERY GOOD CONDITION AS PICTURED CHECK OUT OUR OTHER AUCTIONS MAY SCIENTIFIC ITEMS TO BE LISTED. ASK QUESTIONS
Large high vacuum chamber diffusion pumped used for thin film deposition
The chamber was used to deposit a II-VI semiconductor compound which sublimates at around 600C. The precursors were evaporated from a six foot long tubular stainless steel furnace in which the precursors were contained. The heaters were brought to temperature by running a low voltage current through it. The current was regulated with magnetic saturation transformers. Five such evaporation sources and corresponding substrate holders were used. The substrates were a series of aluminum cylinders heated with oil at maybe 400C. All the controls are in hand. The system is complete but was never powered up at our plant. However. A very similar smaller system is in place and demonstrable. I am an expert in this type of vacuum disposition and will offer technical support for the installation and operator training, if needed. If further discussions ... moreare necessary. Please contact me at 716 282 2975 or by email.
CHA Industries High Vacuum Deposition System Model SE-600-RAP
CHA Industries Vacuum Evaporator Model#SE-600-RAP. 110-240V/ 1-Phase/ 60Hz/ 80A/ Water: 2 GPM/ Air: 60-80 PSI. The Power Supply. Sloan E.B. Twelve/Ten(25"w x 30"d x 40"h) 2) remotes& all associated instrumentation is included. It has been upgraded with a CTI Cryo Torr 8 Cryopump, but does not include the cryopump compressor or hoses. The baseplate accommodates up to 20 feedthroughs for instrumentation, control& rotary motion. SE-600 systems are typically equipped with a 19.5-inch bell jar& planetary fixturing having a capacity of(18) 4-inch wafers. The average cycle time of 20 minutes allows throughput in excess of 54 wafers per hour. This unit was functioning efficiently when decommissioned. We have this item listed as"Local Pick-up" However, if you would like it shipped, it weighs approximately 1,000 ... moreLbs& will need to be palletized. Buyer chooses freight company& pays all associated costs.
Electron Beam Vacuum Vapor Deposition System e-beam MDC
Mill Lane Engineering(Now a part of VEECO) E-Beam Vacuum Vapor Deposition System. This is an impressive E-Beam vacuum vapor deposition system which was functional when removed from service. It represents an opportunity to be rebuilt to a really nice vapor deposition system primarily by investing time. The facility that removed it from use is mandated by policy to disable the machine prior to disposal. To achieve same. The PLC was removed and the control wiring from the PLC was cut and most of the indicator lights on the control panel were removed. Thankfully. The disabling was limited to wiring. To make certain of that, several of the instruments comprising the system have been tested and all appear to be in good functional condition(they power up w/o error indication) The photos show most of these components powering up. The system consists ... moreof the following major components plus others that support them: 1) JC Controls. IG4400 Ionization Gauge Controller. Unit powers up(120 vac) but gauge has been removed. 2) MDC e-Vap 4000 auto indexer. This is connected to E-Vap 4000 in bell jar. 3) MDC e-Vap programmable Sweep Control. 120 vac power powers up fine. 4) MDC e-Vap CVS source control. 240 vac power. Powers up fine. 5) Sycon Instruments STC-200/SQ. 120 vac. Powers up fine. 6) MDC e-Vap CVS 15 15kW Switching Power Supply. Needs 208. 3-phase power, 60 amps max. Untested but functional when removed. 7) CRYO-TORR 8 Cryopump. Untested but functional when removed. 8) 6” based on OD of gate cover and movement distance) gate valve. Above cryopump, manufacture unknown. 9) Bell Jar. 19” ID, 24“ tall, water cooled, two windows, one with shutter. 10) Bell Jar lift. Operates properly and currently wired to raise/lower control but limit switches are not connected(they were part of the PLC control logic) 11) PLC is an Allen Bradley SLC500 with modules as shown in photo. The wiring has been severed so it is untested. As shown in the photos the roughing pump has been removed. The PLC has had all wires cut off from the PL
Alcatel-Lucent High Vacuum Bell Jar System for Thin Film Deposition
This Alcatel-Lucent High Vacuum Bell Jar System for Thin Film Deposition is used and in excellent condition. This unit does not include a vacuum pump. Configuration: Bell Jar Diameter: 13 inches• Linear Actuator Displacement: 36 inches• Granville Philips 275 Convectron Gauge• GE Series One Programmable Controller with CPU Series One Plus• Bell Jar Safety Cage• Input Voltage: 120 VAC Shipping Cost will be around $250 depending on location. Shipping to the United States Only. All International buyers need to contact us before purchasing.
Denton Vacuum Desk IV 6" Chamber, Evaporation Deposition Cold Sputter System
Denton Vacuum Desk IV High Vacuum Evaporation Sputter Deposition System- excellent condition. We do not have the expertise to test. Offering a 30 Day right of return warranty. Serial Number: 46930. Vintage: 02/01/06 6" OD Pyrex Chamber Includes Target Does not require gas Operating Manual Included Electrical Requirements: 120V. 50/60Hz Product Support offered through Denton Vacuum. LLC. A Programmable Logic controller(PLC) controls the system A Touch Screem is used to interface with the PLC. Operator interface is through a graphics program that is running on the the Touch Screen. The Desk IV is a totally self-contained unit. The 60 lpm mechanical pump with exhaust filter is fitted within the system cabinet. Direct below the deposition chamber. This arrangement assures superior and faster operation while freeing up valuable laboratory ... morespace. The Desk IV provides a uniform, conductive, fine-grained 100A coating in a coating cycle under three minutes. The advanced design magnetron sputterhead, in conjunction with the patented anode grid, prevents electron bombardment of the specimen for truly cold sputtering. Please Note: For purchases of this amount. We are unable to accept credit cards or PayPal unless special arrangements are made. Kindly contact us regarding suitable payment arrangements. Presumed good. But untested. We do not have the expertise to test further. This means that this item is being sold as-is, as-pictured with the assumption and understanding that there may be unknown defects. Comes with a 30-day right of return if the unit does not operate per OEM specifications. Inspection is welcome at our facility. Reference#37867 HOURS OF BUSINESS OPERATION: Office Hours: Monday– Friday 8:00AM– 4:00PM Pacific Time Office/Warehouse Pick-Up Hours: Call for appointment prior to arrival For any payment and/or shipping questions. Please call our office at 831.461.9230 We are closed Saturday. Sunday and all major US holidays. Additional information can be found on our webpage: KandUs.com· Item(s) are also
Lot Ceramic Bead Insulated High Current Wired UHV Ultra High Vacuum Deposition
Lot Ceramic Bead Insulated High Current Wired UHV Ultra High Vacuum Deposition
CVC 601 Sputtering Deposition System Sputter With Cryo Torr 8F High Vacuum Pump
You are Bidding on: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 With: CTI Cryogenics 8200 Compressor CTI Cryo Torr 8F High Vacuum Pump If you need this System to be shipped please contact us before bidding! Please see pictures for additional details. You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 8.00% sales tax is applied to all orders shipped to California I really appreciate your bids. CLICK HERE TO SEE OUR ... moreOTHER GREAT AUCTIONS
HIGH VACUUM ELECTRON BEAM CRYOGENIC PUMP SYSTEM DEPOSITION SYSTEM
HIGH VACUUM ELECTRON BEAM CRYOGENIC PUMP SYSTEM DEPOSITION SYSTEM FREE CONTINENTAL USA SHIPPING! INTERNATIONAL BUYERS. PLS CONTACT US FOR SHIPPING QUOTE! SIMPLY ANOTHER ITEM BY You are bidding on a used CONDITION: HIGH VACUUM ELECTRON BEAM CRYOGENIC PUMP SYSTEM DEPOSITION SYSTEM as can be seen in the pictures. This is a Deposition System. This unit was pulled from a working enviornment. It is designed for coating small substrates and modules in laboratory. R&D, and short run production settings. It's Bell chamber can accommodate devices for prototyping and research and development applications. We are selling this AS IS since we do not hold enough expertise so as to understand how this system works. Product Description: APPLICATIONS Anti-reflective coatings Semiconductors Mirrors Compact disc master metallization Dielectrics Organics/polymers ... morePhotonics research. Supports research programs requiring thin-film deposition technology. Thin film reflective and protective coatings deposited on concentrators for solar applications. Thin-film deposition of catalytic material onto high surface area samples. Protective coating deposition on high-emittance surfaces performed for heat receiver application research. Providing mirror surfaces for optics. HIGH VACUUM SYSTEM• Clean. Fast vacuum pumping system for the highest resolution• Automatic vacuum system for easy operation• Specimen preparation accessories• Fully Compliant Comprehensive Safety Features• Compact and modern design. Quiet and vibration free providing a high quality vacuum system capable of performing different preparation techniques in a single vacuum chamber. Automatic process control• Substrate heating sputtering systems can be used to deposit virtually all metals. Alloys and compounds. Most materials that would normally dissociate during thermal evaporation can be sputtered with constant composition. In addition. Sputtering provides the researcher with a number of significant advantages over other deposition techniques. The'intelligent' hi
CHA Industries Model SEC-600-RAP Vacuum E-Beam Evaporator Deposition System
You are Bidding on: CHA Industries Model SEC-600-RAP Vacuum E-Beam Evaporator Deposition System Serial no. 868-12384 Includes: LH Dryvac 100P E1 3874-3 CTI Cryogenitics cryotorr Compressor 8032211 Two Airco Temescal CV-14 Power Supply Inficon IC 6000 Inficon XTC Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 If you need this System to be shipped please contact us before bidding! Please see pictures for additional details. You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 8.00% sales tax is ... moreapplied to all orders shipped to California I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
TFI TELEMARK 6 POCKET ELECTRON BEAM EGUN W ROTARY DRIVE. E-GUN VACUUM DEPOSITION
This auction is for a used TFI Telemark Electron beam e-gun with a rotational drive. We have been told that this is a Telemark egun. Not a Temescal. We are not familiar with eguns and don't know who manufactured it for sure. These items were retreived from a vacuum system that was parted out. This offer is for used equipment in"as is" condition. Dublin(near San Francisco) CA 94568. California Sales tax will be collected for a sale within California. We want a quick/speedy completion of the payment and pickup for this auction. Therefore. Payment is to be made by certified funds or wire transfer and must be received by seller before or at shipment and within 3 working days of end of auction or this sale is canceled. Pickup is to be made within 10 working days of receipt of payment. Seller will make item available for shipment ... moreimmediately upon receipt of payment. Buyer is responsible for making all arrangements& for the costs for the packing& shipping of this equipment. If requested by the buyer. Seller will deliver this item to the UPS Store in Dublin, CA 94568 for buyer to make arrangements for the services that they want and pay for the cost. Please look at the pictures carefully. Before bidding. Ask any questions you may have.
FAST CYCLE LOAD LOCK E-BEAM EVAPORATOR BOX COATER VACUUM DEPOSITION ELECTRON
This auction is for a used Innotec Group LLE-2500 e-beam evaporator fast cycle load lock vacuum system box coater. FEATURES: Front& rear hindged access doors; 2- on board" CTI cryo pumps for loadlock& source chambers; horizontal seperation valve; 3" wafer planetary with top mounted planetary drive; Inficon IC/5 deposition controller; cooling radiator; Innotec VSC controls; Eratron EB8. 8 KW power supply for evaporation; bottom load lock; Temescal 6 pocket e-gun 271 with motorized drive; High voltage transformer; gold& other evaporated materials. It is without manuals. Cryo compressors; roughing pump and possibly other items. Outwardly. What is there, appears intact and in good condition. We don't have facilities to test it. So it's condition is unknown. This offer is for used equipment in"as is" condition. ... moreDublin, CA 94568. California Sales tax will be collected for a sale within California. We want a quick/speedy completion of the payment and pickup for this auction. Therefore. Payment is to be made by certified funds or wire transfer and must be received by seller before or at shipment and within 3 working days of end of auction or this sale is canceled. Pickup is to be made within 10 working days of receipt of payment. Seller will make item available for shipment immediately upon receipt of payment. Buyer is responsible for making all arrangements& for the costs for the packing& transportation of this equipment. Before bidding. Ask any questions you may have. Note: we will offer the 6 pocket egun and the 8KW power supply seperately in other ebay auctions shortly.
Temescal BJD-1800 E-Beam Vacuum Deposition System
TEMESCAL- BJD-1800 E-Beam Vacuum Deposition System Inventory# 57141*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. Bell jar style E-Beam evaporator. 6 pocket e-gun with source selector. Temescal Simba E-Beam power supply with power and sweep controls. Inficon IC6000 crystal deposition rate monitor(can be upgraded to newer model at additional cost) Quartz lamp substrate heaters Single lift off dome with rotation control. CTI-8 cryopump with compressor and roughing pump. 208V. 3Ph, 60 Hz. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. ... morePlease contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
Denton Vacuum BTT3 Benchtop Turbo High Vacuum Evaporation Deposition System
Denton Vacuum BTT3 Benchtop Turbo High Vacuum Evaporation Deposition System Inventory# 59122*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Compact turbo pumped dual source thermal resistive evaporator. Two resistive thermal sources. Quartz 12 in. dia. x 18 in. H bell jar with implosion shield. Rotating sample holder for SEM stub samples. Digital readouts. Front panel push button control. 120V. 60 Hz. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail ... moreor at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
BOC edwards temescal FCE3200 vacuum deposition chamber - thin film e-beam
This BOC edwards/ temescal box chamber is in great condition and ready to accept deposition hardware of your choice and begin working. The machine has a box with an inside footprint of 32x32 inches. 22 inches tall. The source well is 23 inches in diameter and 24 inches deep. The main chamber is 15 inches deep giving a total throw distance of up to 61 inches. Two doors of 32 by 22 inches provide total access to the sample chamber. One door is quick access, the other is bolted. A 18 inch square door is also provided on the source well. A planetary rotation mechanism is currently installed. All vacuum functions of the chamber are controlled via local touch screen interface in manual mode. In remote mode all features of the chamber including deposition can be controlled via the included PLC. This functionality can even be broadcast over the internet ... morefor true remote control. The system is equipped with an aircooled CTI 1020R compressor. Backing is via an ebarra dry mechanical pump to ensure a zero oil backstreaming system that is ideal for coatings where hydrocarbon contamination is unacceptable such as deep uv thin film optics. This item will ship in a wooden pallet with an estimated weight of 7000 lbs. I am happy to ship world wide.
Denton Vacuum DV-502 High Vacuum Thermal Evaporator Deposition System
Denton Vacuum DV-502 High Vacuum Thermal Evaporator Deposition System Pulled from working environment Email with questions or picture requests
NFICON IC 6000 LEYBOLD HERAEUS THIN FILM VACUUM DEPOSITION CONTROLLER IC-6000
INFICON IC 6000 for parts or repair does not turn on NO WARRANTY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-148aa07d45c-0x10e-
CHA Magdrum Thin Film, Vacuum Sputter Deposition Web Coater w/Turbo Pump
You are bidding on a custom CHA Magdrum Vacuum Web Coater. Sputter Deposition System w/Turbo Pump and Gencoa Feedback Controller. The system was designed and built for Nanohmics Inc. in 2005 by a custom vacuum system engineering firm in California to enable research and development in the area of flexible thin film devices. It was designed for continuous vacuum sputter deposition of ceramic materials( e.g. oxides and nitrides) onto 2” wide metal and plastic films/webs. But can accommodate up to 6” wide webs. Web tension and speed controller/spoolers are fully integrated within the bell jar and are under software control. Requires three-phase, 208V electrical supply. The system includes five components(see photos) a main unit with CHA bell jar(34” diam. x 30” tall) Two 19” racks with mounted power supplies and controller equipment(left side) ... morean Ebara dry roughing pump(not pictured- in the chase behind unit) and the PC with controller software. The Ebara dry pump is optimized to handle the turbo pump speed. We have used a number of target materials, which are easily affixed to the copper target bases by a number of supply shops. Various used and new targets are included and parts are easily cleaned using a sandblaster. The unit was connected to a house chilled water system. The internal PVC plumbing is included for the unit(see photo) It’s ready for attachment to house chilled water or a chiller unit(not included) with the system. The system is a perfect fit for small and large firms engaged in R&D. Manufacturing firms, university labs, and anyone else looking to prove out the impact of sputter-deposited materials on flexible web devices. You can spool hundreds of feet so it’s suited for proof-of-concept prototyping, alpha and beta validation, and small quantity manufacturing. We routinely used it to deposit silicon dioxide films on Kapton® webs. The system is fully operational and was recently taken out of service to free up space. The software that runs the tool was written in a graphical interface
Balzers Bell Jar High Vacuum E-Beam Evaporator Deposition System Thin Films
Balzers Bell Jar High Vacuum Deposition Chamber that we used for many years in our production process. It has a Leybold Roughing Pump with a Ruvac Turbo Pump. The roughing pump and diffusion pump were in excellent working condition when taken out of service. There is an o-ring in the system that is leaking preventing the chamber from pumping properly. I would recommend a standard servicing before putting back in a production environment. It could benefit from an oil change as well as replacement of o-ring seals. It does have an ion source installed but the power supply for it is not included. There is a 4 pocket electron beam gun with the EB8 power supply as well as a resistance source and power supply for metal coatings. The internal heaters were also in good working condition when removed from service. There are 2 sight ports on the bell ... morejar. There is an Inficon IC6000 for X-Tal thickness control of your coatings. There is a 5 planet double rotation. Please email with any questions prior to placing a bid. Local pickup only unless you want to hire your own riggers and freight.
CHA Industries SE-600-RAP High Vacuum Deposition System Evaporator
CHA Industries SE-600-RAP High Vacuum Deposition System High Vacuum Deposition Systems In all SE/SEC-Series systems. The baseplate(typically 20 inches) accommodates up to 15 feedthroughs for instrumentation, control and rotary motion. SE/SEC-600 systems are most often equipped with a 19.5" diameter bell jar and Planetary Fixturing having a capacity of 18 4" wafers. The average pumpdown time of less than 30 minutes allows throughput in excess of 54 wafers per hour. Ultimate vacuum: 10-8 torr range Cryogenic pump: 8" Mechanical pump: 23-57 CFM. Dual stage Cold trap: 2.5 liter capacity. 200 sq. inches of surface area, 10 hours holding time Water baffle: Optically dense. Chevron baffle High vacuum valve: 7-3/4" I.D. Seals vertically Foreline/Roughing valves: 3" I.D. Valve actuation: Electro-pneumatic(all vacuum valves) ... moreValve sequencing: Manual and automatic(Auto-Tech II) Ionization gauge control: Dual ionization gauge tube. Auto ranging with dual convectron positions. Dimensions: 79"H x 43"W x 37"D Weight: 1.200 pounds Utilities Electrical: 208/10/70A/4-wire connection with ground(3 phase. 5-wire also available) Water: 10 GPM(minimum) Air: 90-110 PSIG In excellent condition. Unit is functional. Unit powers up. Removed in operating condition from service. Some minimal cosmetic scratches or marks that do not effect the units functionality. Reference images for item condition. Listing is for unit only. Sold as-is. Freight Shipping Available. Free Palatalization Included w/ Shipping* Local Pick Up OK* Please Read Payment Instructions Below* Same Day Handling Time! Check out my! Be sure to add me to your! Buyer Satisfaction We do our best to present accurate. Detailed information about every item listed. Our staff are not product experts in every asset category we may list; therefore CISL Company reserves the right to cancel any transaction, even after auction close, if the item is found to be not as described. Our goal is 100% customer satisfaction. If you have any questions, we as
Vapor deposition unit, vacuum deposition, E-gun Varian Parts or repair
This is a used vacuum deposition unit being sold for parts or repair. There are a few components missing. However most of the major parts are in place. We are unusre of the make and model but belive it is a Varian 980-2446B. Control instrumentation: Deposition controller: Maxtek Inc Model MDC-360. Serial# 246, Varian Accessory control for: Fixture drive, Shutter, Hoist, 3 indicator lights- LN2 power. LN2 solenoid, Trap heater, Vacuum process control: Varian model 980-6100 automatic valve sequencer, Crucible indexer: Telemark Model 376 6 position index control. Controlling Oriental Motor CO gearhead motor p/n 2GK7.5KA, X-Y sweep Telemark Telemark: Control TT-3/6, Electron gun power supply: Telemark model TT-6 Serial# 6043, 208/240 V 40 A 50/60 Hz, Water cooled bell jar is raised by an electric screw drive. Bell ID: 17 inches, Inside height(upper ... moreportion of bell) 25 inches, This unit was probably rebuilt or overhauled by Mat-Bac Technology Inc in Orman Beach FLA, Specifications: MFG: Varian, Model: 980-2446B, Serial: 75524-2-2, Volts: 208 V, Amps: Phase: 3, Drive: Controls: Manuals: Air: Weight: Lbs, Condition: For parts/repair, Length: Width: Height: All dims inches unless otherwise noted, Inventory# 3824 For more information call 610-286-1655. Please call or email for shipping rates. International purchases: A $40 documentation processing fee will be added to total purchase for items under $150. When communicating with us please use your own email address or call 610-286-1655. We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system. Send emails to heritageequipment AT gmail.com The new ebay buyer protection program has inspired us to offer all of our items“as-is” This does not mean that you are buying a machine with deficiencies. Known or unknown. What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible w
Inficon Leybold Heraeus IC-6000 013-334 Vacuum Deposition Controller No Display
Inficon Leybold Heraeus IC-6000 013-334 Vacuum Deposition Controller No Display Inficon 013-334 IC-6000 Item Condition: Used Quantity: 1 Unit Cosmetic Condition: w/scratches Functionality: Power on test-ok. No Display- Remarks: Actual Weight: 12.5Kg Dimension: 49x47x13- Comes with 14 days money back guarantee. We always strive to ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Local Buyers are welcome. Shipping will be via Air21/LBC, local shipping rates will be applied. Accepts paypal and wire transfer and bank deposit payments. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current phone number as well so we can write it down on the package. Locator: ... more1411101-KRN. BFWAREHOUSE-B2992(1) CMP123 =================================================================================================================== TERMS AND CONDITIONS ON EACH SALE WARRANTY: All NIB(New-In-Box) NOB(New-Open-Box) and NNB(New-No-Box) comes with 14-days money back guarantee. All"USED" equipment had been tested and are guaranteed functional. Also comes with 14-days money back guarantee. All items that are declared"AS IS" have no warranty.No returns, and no refund. SHIPPING(DHL) In our quest to have the item arrived to you the soonest. We subsidize some of the shipping cost and make DHL as our standard courier. We send tracking number after each shipment. If we miss it. Please do not hesitate to send us a message. DHL shipping normally takes 2 to 5 working days to most worldwide destinations. Due to very high customs charges. We discourage DHL shipping to South American countries( Brazil,Ecuador, etc. a
Used Vacuum Deposition Chamber System, includes Cryopump, Cryo compressor
Used Deposition Chamber. See photos for details. Includes Cryopump, compressor, all that is pictured. May be inspected. Local Pick up only. B uyer is responsible for determining the suitability of this product for their application. PAYMENT OPTIONS: We accept PayPal. Company Checks, All major credit cards, Wire Transfers. Please call(805) 961-4457 TAXES& FEES: California Sales Tax applies if order within California at 8% Handling charges apply if stated in listing. Your cost is the price of your item. Shipping charge, insurance, and sales tax if applicable. SHIPPING: Item is shipped via freight. Fully insured. You may also use your own carrier or arrange for pick up. Please call or Email to request a Freight Quote. It takes 1 business day to receive a quote. If quote is requested prior to purchase then item can be shipped in 1-2 business ... moredays from receipt of payment. If quote is requested after purchase it may take an extra day. REFUNDS& RETURNS: Items authorized for return must be returned prepaid. Fully insured, packaged carefully, complete, and in original condition. DISCLAIMER: Anacapa Equipment Brokers. Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment purchased. The Purchaser, by purchasing this equipment, indicates their acknowledgment of, and agreement, to the terms of this disclaimer. Anacapa Equipment Brokers. Inc. 866 Vereda del Ciervo. Goleta, CA 93117 805 961-4457
VINTAGE GE RESEARCH 1961 VACUUM DEPOSITION OF NICHROME RESISTIVE FILMS
THIS AUCTION IS FOR THE PICTURED PAPERWORK. PAPERWORK IS FROM THE COLLECTION OF A GE SCIENTIST THAT WORKED BETWEEN SYRACUSE AND SCHENECTADY. THESES ARE NOT COPIES THEY ARE THE ORIGINAL FOLDERS. BINDERS, REPORTS, GRAPHS, CHARTS AND OR BLUE PRINTS FROM THE DATES MENTIONED. MANY ITEMS WILL BE LISTED FOLDERS AND RESEARCH FROM A GE SCIENTIST FROM THE 30'S- 70'S. AS PICTURED CONDITION.
ALUMINUM VACUUM DEPOSITION FINISHING PLATING COATING MACHINE
ALUMINUM VACUUM DEPOSITION MACHINE WAS TOLD IT WORKS. UNTESTED BY US. FOR ALUMINUM PLATING WAS USED IN A TEST ENVIROMENT OVERSIZE SHIPPING. 10' TALL Any questions please email or feel free to call Delaney's Surplus at 608-643-8009 If buying and needs freight please email your zip code and if it is a business with a dock. Closed Tuesdays and Wednesdays.
CVC Industrial Vacuum Deposition System - Partial
CVC Vacuum Deposition System Parts: Frame(48"H x 32"W x 28"D) on 2" double-wheel casters. Bell Jar Base for 11" OD/ 8" ID flange& 21" Dia collar, power supplies& accessories. This system is for parts only. Shipping is listed as"Pick Up" only. If you want this item shipped, you will need to make arrangements& bear the cost. Make offer. If you need more photos, please send an alternate e-mail address with your request.
Vacuum Deposition of Thin Films by Holland 1956 Hardcover
Vacuum Deposition of Thin Films by Holland 1956 book is in good usable condition. binding in good shape
Balzers Vacuum Deposition Anti Reflective Lens Coating Unit 42 Batch + Polycold
READY TO SHIP* Balzers Vacuum Deposition AR Lens Coating Unit 42 Lens Plus Polycold Normal 0 Consisting of A Vacuum Deposition Chamber. Multiple Dome Lens Racks, 3 Racks of Components, 2 Vacuum Pumps and a Polycold Unit Unit is Sold As Is It was pulled from a working environment but no longer has access to the necessary power supply to test and is now in cold storage in a climate controlled area exactly like a clean room where such equipment operates since its decommission. I make no claim to the functionality of any individual components ADDITIONAL PHOTOS OF INDIVIDUAL COMPONENTS AVAILABLE UPON REQUEST Process Control Components Normal 0 Rack 1 1. Balzers Electron Beam Power Supply EVH 110A 2. Sigma Thin Film Deposition Controller SQC 122C 3. Balzers Electron Gun Control EKS 110A 4. PFC Control Module 5. Circuit Breaker and Fuses Rack 2 ... more1. EPS101 2. MC101 3. QM 101 4. KB101 5. PC101 6. IU101 7. DA101 8. OU101 9. BL201 Address Data Control 10. Ion Tech GFC 1000 Gas Flow Controller 11. Commonwealth Scientific I/O Mark II Controlller 12. Balzers TPG 070 Multi Priani Meter 13. 2) Balzers IKW 010 High Vacuum Relay 14. Pfeiffer Vacuum Single Gauge 15. Interval Timer Heater 16. Balzers RVG 040 Valve Control Unit 17. Power Controllers 18. Glow Discharge Control 19. Nitrogen Cooling Control 20. Rotary Cage Control 21. High Voltage Panel Rack 3 1. Balzers EEU 301 Emergency Cutout 2. 2) Balzers ESU 101 Start Unit 3. EPS101 4. MC101 5. QM 101 6. KB101 7. PC101 8. IU101 9. DA101 10. OU101 11. BL201 Address Data Control Freight to be determined and arranged and paid for by the Buyer. We can arrange a rigger to ship and crate the merchandise but ALL associated costs will be the responsibility of the BUYER International shipping would then be arranged by the buyer or we can arrange a Miami Freight Forwarder Local pickup available but services must be by a licensed professional freight mover which we can arrange for you at your expense
Inficon / Leybold IC-6000 Vacuum Deposition Controller with (7) Cards
Inficon/ Leybold Heraeus IC-6000 Vacuum Deposition Controller Model 013-093 with RS-232C Interface Card(4) OSC Source S/S Cards and(2) I/O Cards ~14 Day Right of Return~ S/N 260053 Please note: This item powers up and is in GOOD/FAIR cosmetic condition. Unit has some scratches on the outer case and a faint image burned into the CRT but these in no way affects performance. See pics. This unit powers up but is out of our area of expertise thus we do not have the knowledge or means in which to properly test it. You are welcome to ask questions regarding it and if you are a local Buyer you are welcome to come and inspect it prior to buying/bidding. Please call us for hours of operation. 626-472-7500. We do not have any accessories for this unit; only what is pictured. Item carries a 14 Day Right of Return. This item carries a 14 day right of ... morereturn provided that our warranty seals are intact and there is no evidence of user misuse; in order to allow the buyer time to confirm the unit is in working condition. And ONLY IF the item listed above is not as described or pictured. Items are as pictured above. If you are unsure about the completeness or condition of an item. Please contact us before placing your bid! International Buyers- Contact us for a shipping quote. Import duties. Taxes, and charges are not included in the item price or shipping cost. Customs fees are collected when you pick the item up. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. These fees are not additional shipping charges. We will not under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and International laws. Please read all of our terms of auction below before placing a bid. Terms of Auction: By placing a Bid/Buying Now you have agreed to purchase this item based on the description above. Please ask your questions before bidding so that you are 100% sure that you want the
Inficon XTM Thin Film Deposition Monitor / Controller. Vacuum, Thickness.
This listing is for an Inficon XTM Thin Film Deposition Monitor/ Controller. It is in fair cosmetic condition. With some scuffs, scratches or magic marker traces, please see pics. It has been tested to power up and respond to key presses, but we do not have the equipment to test it any further. Came as surplus from a government lab and, due to the limited testing, is sold as-is, even though it might work fine- we just don't know! This is the cheapest one on ebay- don't let it get away!