In 
 
Order by: 
Available to: 
Price: 
 - 
$
3200.00
19h 15m 44s
0 bids
Condition: Used
Location: Philadelphia, United States
Comes with 2 conveyor pallets. DDM Novastar Spartan 8S wave solder machine.Used, works fine. It is currently filled with approximately 125 pounds of Ultrapure ... more63/37 leaded solder. Full spec are available at https://www.ddmnovastar.com/wave-solder/low-to-medium-volume/spartan-8s-and-8d-wave-soldering-machines Pick up in NE Philadelphia 19154, or buyer arranges pickup / delivery.
$
1500.00
Buy It Now
Condition: Used
Location: Carson, United States
Electrovert Econopak 229 wave solder machine. Foam fluxer, bottom preheaters, 15" wave, 220v 3ph with wavedynamics. Unit was purchased just before ... more9-11-2001 from used equipment reseller and initially setup. Never used. The unit has been in storage ever since. Unit can be purchased with or without base cabinet. Unit is somewhat disassembled for easier shipping. Contact seller for arrangements or local pickup. Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup.
$
5000.00
9d 16h 49m 22s
0 bids
Condition: Used
Location: Monroe, United States
The Spartan 12S (Single wave) solder machine can process printed circuit board assemblies up to 12” x 15.8” wide and require very little solder for their ... moresize. Automatic wave solder system with proven performance, self-contained fluxing, preheating and laminar (smooth) solder wave modules.
$
187.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
【 EXTENSIVE APPLICATION】- The T962 reflow soldering machine can solder most PCB boards small parts, for example, CHIP, SOP, PLCC, QFP, BGA, etc. It is ... morethe ideal rework solution from single runs to on-demand small batch production.
$
21999.00
Buy It Now
Condition: Used
Location: San Diego, United States
This clean production ready DMM Novastar 14FS lead-free finger type single wave soldering machine can be yours with 2 24" bottom pre-heaters and a full ... morepot of solder for only. 14FS Single Lead-Free Wave Solder Machine.
$
19999.00
Buy It Now
Condition: Used
Location: San Diego, United States
Save big on this production ready DMM Novastar 14 FS lead-free single wave soldering machine with foam fluxer, 1 24" bottom pre-heater and full pot of ... moreAlpha Vaculloy lead-free solder! Wave solder machine with complete automation of self-contained fluxing, preheating, laminar (smooth) and turbulent (SMT passive) solder wave modules.
$
375.00
Buy It Now
Free Shipping
Condition: Used
Location: Nashville, United States
$
7500.00
Buy It Now
Condition: Used
Location: Minneapolis, United States
Available as Pb Free - RFQ. FOB: Origin.
$
16499.99
Buy It Now
Condition: For parts or not working
Location: Phoenix, United States
The SPX Selective Soldering System handles basic to complex dip, drag, wire bond, and other through-hole soldering processes. The SPX system utilizes ... morea graphical interface for simple programming and operation.
$
4850.00
Buy It Now
Free Shipping
Condition: Used
Location: Osseo, United States
Model # : M04D, M4. Solder Capacity: 65lb. Power: 1500W. Wave Solder Pot. Pot has slag etc in it. Wave Size: 6 x 2". Full size truck access and forklift ... moreis acceptable. Max Temp: 600°F.
$
119.00
Buy It Now
$15.95 Shipping
Condition: Used
Location: Rushford, United States
Vitronics Deltathermocouple1 Vitronics Soltec Delta 6622CC Wave Solder Pot Therm Vitronics Deltathermocouple1 Vitronics Soltec Delta 6622CC Wave Solder ... morePot Thermocouple and Holder. Barker MFG P-200 Hood Lift.
$
338.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Adrian, United States
$
399.00
Buy It Now
$24.18 Shipping
Condition: Used
Location: San Diego, United States
Item: Electrovert Board For Vectra Wave Solder Machine. Local pickup is available in San Diego. Model Number:4-1860-185-00-.
$
25000.00
Buy It Now
Condition: Used
Location: Dracut, United States
Very Nice Beamworks Spark 400 Selective Laser Solder Machine For Sale. 2000 SMT components. Feeder slots - 29 standard. Selective Assembly of Planned ... more(and Unplanned) Missing SMT Components. Solder Paste Dispensing.
$
3300.00
Buy It Now
Condition: Used
Location: Minneapolis, United States
IMPELL Purification Techniologies Downdraft Table Model DT1000 with Heppa Vacuum, on casters as pictured. Decommissioned from an Electrovert Electra Wave ... moreSolder Machine. Minneapolis, MN 55441.
$
1250.00
Buy It Now
Condition: Used
Location: Magnolia, United States
You are looking at a Used Presto Lifts Solder Pot Trolley - Used w/Technical Devices Nu/Era MP Wave Solder. This item is in used condition. The photos ... moreare of the actual item being sold. Untitled 1.
$
25000.00
Buy It Now
Condition: Used
Location: Rushford, United States
JMW Part # : 200218. Folungwin Titan 450 Wave Solder - Lead Free Dual Wave with Spray Fluxer. Manufacturer : Folungwin. Solder Pot Components Material: ... moreTitanium. Solder Pot Material: Titanium. Dual Wave (Dancer Wave and Main Wave).
$
899.00
Buy It Now
$29.00 Shipping
Condition: Used
Location: Rushford, United States
$
14.99
Buy It Now
$10.85 Shipping
Condition: Used
Location: Rushford, United States
$
3950.00
Buy It Now
$127.15 Shipping
Condition: Used
Location: Rushford, United States
$
2849.00
Buy It Now
$0.73 Shipping
Condition: Used
Location: Canada
$
17500.00
Buy It Now
Condition: Used
Location: Duncan, United States
Model: GoSelective Light (GOS LIGHT IN). Manufacturer: SEHO. SEHO Selective Soldering Machine. - High-precision selective miniwave soldering. - Nitrogen ... moreinertisation of the solder wave ensures highest soldering quality.
$
7950.00
Buy It Now
Condition: Used
Location: Orange, United States
SURPLUS & MACHINERY SALES .
$
690.00
Buy It Now
Condition: New – Open box
Location: Minneapolis, United States
Electrovert 3-1051-081-03-1 Vane for Main Lambda Wave Flow Duct, 17" opening. Complete flow duct and N2 Nozzle available to.
$
19500.00
Buy It Now
Condition: Used
Location: Duncan, United States
SEHO SelectLine SEL-LINE Selective Soldering Machine (2011). Manufacturer: SEHO. SEHO Selective Soldering Machine. - CFM 500 Fluxer Module. - Micro Drop ... moreJet Fluxer. - Monitoring of the fluxer function.
$
4300.00
Buy It Now
Free Shipping
Condition: New
Location: Cary, United States
The ECD WaveRIDER NL 2 solves this dilemma. WaveRIDER NL 2 Pallet. Establishing the wave soldering process can be challenging. We're not only a distributor, ... morebut a main technical resource, helping you identify the right products for your application.
$
995.00
Buy It Now
Condition: Used
Location: Minneapolis, United States
Removed in working condition from an Electrovert EPK Plus Wave Solder Machine. Machine had the optional motorized solder pot up/down, in/out. Assured ... moreTechnical Service LLC.
$
272.00
Buy It Now
$88.00 Shipping
Condition: New
Location: 龙华区, China
1pcs T962 Infrared IC Heater BGA Rework Station. The T962 reflow oven can be used in leaded and leaded free SMD and bga reworking. T962 can uses a visualable ... moredrawer design to hold the PCB in the heating chamberand with lcd display, it allows the soldering process autmatically finishedunder your eyes.
$
13800.00
Buy It Now
Free Shipping
Condition: New
Location: China
Offline inspection. Specialises in SMT Production Line (PNP Machine)more than 9 years. Suitable for 0201 chip inspection. Visual system. Top : ≤30mm ; ... morebottom:≤45mm. Inspection mode. Q:How is the training?. ).
$
55.00
Buy It Now
Condition: Used
Location: Minneapolis, United States
Several available.
$
1800.00
Buy It Now
Condition: Used
Location: Minneapolis, United States
Main Wave Solder Nozzle assembly with flow duct, vane and N2 nozzle.
$
110.00
Buy It Now
Condition: Used
Location: Minneapolis, United States
$
740.00
Buy It Now
$45.08 Shipping
Condition: Used
Location: Deltona, United States
For Vitronics Soltec 6748 MySelective Selective Solder.
$
4000.00
Buy It Now
Condition: Used
Location: Magnolia, United States
You are looking at a Used Air-Vac PCBRM-12 Solder Fountain Mini Wave Solder Rework Station w/Accessories. Used with Leaded Solder. Untitled 1.
$
2.25
Buy It Now
Free Shipping
Condition: Used
Location: San Diego, United States
Minimum order is 50.
$
55.00
Buy It Now
$14.92 Shipping
Condition: New
Location: Clearwater, United States
ERSA Wave Solder Machine Fusible Fin T 6.3A L250VFusible Fin T 6.3A L250VERSA PowerFlow Wave Solderpart #:GEBS16.3A-TBrand New, Never Used
$
135.00
Buy It Now
$21.61 Shipping
Condition: New
Location: Clearwater, United States
ERSA Carlo Gavazzi Wave Solder Machine Solid State RelayCarlo Gavazzi Solid State Relay ERSA PowerFlow Wave Solderpart #: RGC1A60D30KKEBrand New, Never ... moreUsed
$
593.00
Buy It Now
$21.61 Shipping
Condition: New
Location: Clearwater, United States
ERSA Wave Solder Machine Dunkermotoren BG 65X25CI Servo Motor Dunkermotoren BG 65X25CI Servo MotorERSA PowerFlow Wave Solderpart #:214559Brand New, Never ... moreUsed
$
8995.00
Buy It Now
Condition: Used
Location: Mountainair, United States
We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- Electrovert Econopak Plus Wave Solder System ... moreModel# EPK PLUS/400F With Chemetronics Fire Suppression System Model# MICRO1-EV FEATURES: Model Number# EPK PLUS/400F, Manufactured By: Electrovert See Table Below For Specifications Estimated weight at ~5000 lbs. 189 by 69 by 84 inches raw CONDITION: Condition looks to be previously installed and complete to our knowledge. CA# 2783 NOTES: don't buy if. TERMS& CONDITIONS: LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, computer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high voltage components, high pressure components, industrial automation components, industrial electrical components, lab& industrial ovens& furnaces, liquid pumps, machine tools, mechanical parts& assemblies, optical parts& assemblies, pneumatics, power supplies, rf radio frequency components, robotics, test and measurement equipment, ultrasonic equipment, vacuum pumps& components, valves and fittings, video components, wire. Cable& shrink tubing, Electrovert is currently owned by. This model is considered obsolete however you can find on line to inquire about their current models and information. For more information about Wave Soldering please visit Wikipedia's entry at: Below is the majority of the information available for the Electrovert Econopak Plus System we have been able to locate through the Internet. We are not able to confirm the accuracy of this information as it is from a third party. General Specs Standard Power Sources: 220 VAC. 3 Phase, 60 Hz 440 VAC. 3 Phase, 60 Hz 380 VAC. 3 Phase, 50 Hz, Power Consumption: Basic System: EPK-I, 1
$
3200.00
Buy It Now
Condition: Used
Location: Minneapolis, United States
Titanium Solder Pot Liner for a Speedline Electrovert Vectra 450/F Wave Solder. Condition is "Used". Previous owner was using SN100c Pb Free alloy. FOB: ... moreOrigin Minneapolis, MN 55441.
$
275.00
Buy It Now
$21.61 Shipping
Condition: New
Location: Clearwater, United States
ERSA Wave Solder Machine INTEC EC Motor INTEC EC Motor ERSA PowerFlow Wave Solderpart #: BL6540BBrand New, Never Used
$
89.00
Buy It Now
$29.00 Shipping
Condition: Used
Location: Rushford, United States
$
199.00
Buy It Now
$29.00 Shipping
Condition: Used
Location: Rushford, United States
$
999.95
Buy It Now
Condition: Used
Location: Magnolia, United States
You are looking at a Used Speedline Electrovert Vectra Wave Solder Machine Top Heater Panel Assembly. We do have more than one available if needed.
$
3900.00
Buy It Now
Condition: Used
Location: Sidney, United States
Of Banner Industries Inc. Model-Mark I-B, Serial# 280-1660. Machine is full of silver solder the feeding tray is included. Free loading and storage.
$
270.00
Buy It Now
$65.74 Shipping
Condition: New
Location: Clearwater, United States
ERSA Wave Solder Machine SOLTEC Motor Flux Unit SOLTEC Motor Flux UnitERSA PowerFlow Wave Solderpart #: LS56P/TBrand New, Never Used
$
1305.00
Buy It Now
Condition: Used
Location: Excelsior, United States
Speedline Technologies, Electrovert IR Pre-heater for EPK series solder wave machines. Used, removed from a working machine. FOB: Origin 55439.
$
45.00
Buy It Now
$15.71 Shipping
Condition: New
Location: Clearwater, United States
ERSA Wave Solder Machine Rail Fingers [L] Rail Fingers [L]ERSA PowerFlow Wave Solderpart #: NABrand New, Never Used
$
119.25
Buy It Now
$29.00 Shipping
Condition: Used
Location: Rushford, United States
Electrovert Econopak 229 wave solder machine spare solder pot/pump Unit was purchased just before 9-11-2001 from used equipment reseller and initially ... moresetup. Never used. The spare pot/pump unit has been in storage ever since. Sale is for Solder Pot/pump only other pictures show it installed on machine Contact seller for shipping arrangements or local pickup. Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup.
$
119.25
Buy It Now
$14.70 Shipping
Condition: Used
Location: Rushford, United States
$
200.00
Buy It Now
$18.43 Shipping
Condition: New
Location: Clearwater, United States
ERSA Wave Solder Machine 16" Heating Elements16" Heating ElementsSolder Pot Heating ElementsERSA PowerFlow Wave SolderBrand New, Never Used
$
269.25
Buy It Now
$29.00 Shipping
Condition: Used
Location: Rushford, United States
$
45.00
Buy It Now
$15.71 Shipping
Condition: New
Location: Clearwater, United States
ERSA Wave Solder Machine Rail Fingers [V]Machine Rail Fingers [V]ERSA PowerFlow Wave Solderpart #: NABrand New, Never Used
$
149.25
Buy It Now
$29.00 Shipping
Condition: Used
Location: Rushford, United States
Electrovert Econopak 229 wave solder machine spare solder pot/pump Unit was purchased just before 9-11-2001 from used equipment reseller and initially ... moresetup. Never used. The spare pot/pump unit has been in storage ever since. Sale is for Solder Pot/pump only other pictures show it installed on machine Contact seller for shipping arrangements or local pickup. Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup.
$
360.00
Buy It Now
$21.61 Shipping
Condition: New
Location: Clearwater, United States
NORDAC 500E Frequency Inverter. ERSA PowerFlow Wave Solder.
$
199.00
Buy It Now
$29.00 Shipping
Condition: Used
Location: Rushford, United States
$
322.00
Buy It Now
$55.33 Shipping
Condition: New
Location: Clearwater, United States
ERSA Wave Solder Machine Phoenix Contact Power Supply Unit Phoenix Contact Power Supply Unit 3AC/24DC/40 QUINT POWER, Screw connection, DIN rail mounting, ... moreSFB Technology 3:PhaseERSA PowerFlow Wave Solderpart #: QUINT-PS-3AC-24DC-30Brand New, Never Used
$
346.00
Buy It Now
$21.61 Shipping
Condition: New
Location: Clearwater, United States
ERSA Wave Solder Machine SMC Electro-Pneumatic RegulatorElectro-Pneumatic RegulatorERSA PowerFlow Wave Solderpart #: ITV2030-31F3N3Brand New, Never Used
$
11200.00
Buy It Now
Free Shipping
Condition: New
Location: China
PCB Application. PCB thickness. Before or after DIP wave. PCB fixing mode. Solder paste unavailability, insufficient or excessive solder paste. Specialises ... morein SMT Production Line (PNP Machine)more than 9 years. ).
$
22500.00
Buy It Now
Free Shipping
Condition: New
Location: China
PCB fully covered, with array and bad marking function. Specialises in SMT Production Line (PNP Machine)more than 9 years. Connection with other SMT machine. ... moreOptical system. PCB thickness. PCB weight. ).
1 2
 In 

Former Listings  
 
Electrovert WDC-6-HT Solder Reflow / Wave Solder / Fountain / Pot
Electrovert WDC-6-HT Solder Reflow/ Wave Solder/ Fountain/Pot Perfect operating condition Used in our assembly operation for last 2 years. Never any issues with performance. Only selling as we just purchased a large wave flow solder line and we have not been using it We will securely pack and prep for delivery anywhere in continental U.S. Freight Cost Listed is due to limited eBay listing requirements; Actual Freight and packaging cost will vary and depend upon ship to location and desired method of transit. Freight can also be arranged by buyer if so desired Product will ship within 2 days of payment clearing Also for sale locally. So ad may not run full term.
Electrovert Econopak 229 Wave Solder Machine - Solder Pot/Pump
Electrovert Econopak 229 wave solder machine spare solder pot/pump Unit was purchased just before 9-11-2001 from used equipment reseller and initially setup. Never used. The spare pot/pump unit has been in storage ever since. Sale is for Solder Pot/pump only other pictures show it installed on machine Contact seller for shipping arrangements or local pickup. Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup.
12" Lead Free Wave Solder Machine w/Titanium Pot
StrecKfuss 12" pallet wave solder machine Model E014 original date of Mfg unknown.This machine was refurbished and converted to a lead free titanium system for running SAC305 lead free solder in 2006 I have the invoice for titanium pot and accompanying parts. No labor included, $18,375.00 It included the following: Main Wave, Funnel Socket, 1 Solder Pump, 1 Temp Sensor, Complete Solder Bath Heating, Temp Limiter, Connecting Cables, and Solder Bath Covering. Everything else on the machine was redone at the time of the upgrade. The pot has been drained but theres still a little Sac305 left in the bottom. Machine comes with, Foam Fluxer, 4 bottom side preheaters, 3 or more pallets Temp controller is calibrated and good for a few more months.Pot capacity is either 400 or 480lbs Overall Length, end of rails, is 9ft. 220V Adj speed control ... more0 to 20ft per min Adj transport 4 to 8 degree incline, Adj wave height Adj height and temp preheaters. Manuals and Stand included. Seller went out of business but I personally know the facilities guy who rebuilt and ran this machine and have 100% confidence in it. Came off line in Jan. I saw it running in Dec. I pick up their solder dross for refiner,so I can verify what little remains in the pot is SAC305 Available for pick up, Phoenix, Az. or I can deliver it to my local crater for skidding, extra charge) and loading
TIC SW-OP Flux Wave Solder Flow Optimizer Module +Board
Questions? Call us: 1-877-328-9236. TIC SW-OP Flux Wave Solder Flow Optimizer Module +Board. Manufacturer: Technology Information TIC Model: SW-OP Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Technology Information TIC Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: This item was not tested since we do not have the proper resources. The display has a crack. As seen in the picture. One of the carrying case latches is unlocked but the other one is not, so it is left open. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) TIC SW-OP Wave Solder Optimizer, 1) Training& Troubleshooting manual, 1) Optimizer Reflow Module manual, 1) Quick Start Guide(eliminating defects) manual, 2) Certificate of ... moreCalibrations, 1) Interface Board, 1) Carrying case, Specifications: Manufacturer: TIC Technology Information Corp. Model: SW-OP, SN: 2251, Last calibration: 2006, Next due calibration: 2007, SKU: L28L010 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote.
HEXACON LevChek LEV CHECK LC-1510 15” x 10” x 1/8” WAVE SOLDER GAUGE
Hexacon LevChek LC-1510 15 x 10 x 1/8-inch Wave Solder Gauge Features are as follows: Solder wave gauge is used on wave soldering equipment to monitor soldering quality factors including flux coverage. Wave shape, wave turbulence and conveyor leveling to enable process calibration and optimization· Specially tempered glass panel· Heat resistant gauge markings are printed in 1” grid pattern on upper surface· Dimensions: 15 x 10 x 1/8(inches) Grid Format: 1” parallel Condition: Being sold as is. No refunds or exchanges. Used– as shown. Unit does show signs of use& also has some grid lines missing. Flux or other residue is burnt into glass– unable to get photo to show this in detail without glare. Graded fair to good Please note: if you require shipping services other than stated or you wish to use your own UPS account– please ... morerequest prior to payment/shipping. Continental US shipping: Flat rate shipping of $14.50– includes insurance for purchase price. Discounts available for multiple purchases. As always– tracking on every purchase. Canada: rates based on USPS. If UPS or other is used– overage will be refunded. Other than Canada. UPS or federal express(your account) Questions– please contact us prior to placing bid and specify the item number please. Payment: Payment must be received prior to removal&or shipping. Texas residents add 8.25% unless TX Resale or Usage Certificate remitted with payment. We accept PayPal& other forms of payment; please see selections below. Check out my! Be sure to add me to your! Please visit our ebay store for more great items. We specialize in Printed Circuit Board Assembly(Electronics Manufacturing) Equipment. Business& Industrial Auctions; Appraisal, Project Valuation& more. Thanks for visiting! Remember Buying used&or refurbished equipment is eco-friendly and helps preserve our non-renewable resources. Internal no. 12923& 12924.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13e3e015a72-0xf6-
WAVE SOLDER MACHINE for sale by owner
ERSA ETS 330 Wave Solder Machine for sale by owner. 11' l)x 3' w) x 4.5' h) Machine works well but is no longer needed for production. Sold with ductwork. Solder, flux, conditioner, circuit breaker box, extra fingers,maintenance tools, computer, monitor, manuals and instructions. Perfect for thru-hole soldering or scrapped for parts Machine is disconnected and ready for immediate removal. Must be transported by buyer. Please email epatterson@ktechonline.com for more information. Machine may be seen in operation by video.
Novastar Spartan Model 8S Wave Solder Machine
This machine was purchased new in 2007 and has been trouble free until it was replaced with a SMT line and reflow oven about 2 years ago. Since then it has seen only occasional use for some of our older products and as a backup for our current production line. It is in perfect running condition. And was actually used last week to build a few circuit boards before being listed on ebay. It will remain connected and operational until the buyer can come and evaluate. I have confidence the buyer could literally move the equipment to its new home, plug it in and start production. Included in the sale are the operation manuals and duct work. As well as 5 bars of Electropure Sn63/Pb37 65984 solder. DESCRIPTION: Dimensions: 53" Tall x 33" Deep x 81" Wide(cabinet width = 51" + 2* 15" rails on both sides) 208 Volt. Single phase. ... moreBuyer is responsible for all crating and shipping charges from our Oviedo. FL location. Please contact Andy at 407-706-6326 for all questions.
Speedline Technologies/Electrovert Electra Wave Solder
Manufacturer: Electrovert Model Number: Electra Serial Number: 11876284 Input Power: 440V. 3 Phase, 81 KVA, 60 Hz, 106 Amp Dimensions: 179"L x 65"D x 69"H Vintage: 2/1999 Features: 3 Bottom Convection Preheat. Auto Pot Height, Auto Roll-out Pot, Lamda wave, Chip Wave, Finger Cleaner Asset Number: 5251 THIS MACHINE IS NOT FUNCTIONAL AND SHOULD BE CONSIDERED A PARTS MACHINE. Known issues are electrical. What is included with the machine is shown in the pictures. We are unable to power and test this machine. It may be possible to bring the machine back to functional- that is up to the buyer to determine. Please contact Matt Grimes at 859.499.3455 with any questions. Electronic Automation Services Inc. is a buyer and reseller of PCB Assembly equipment. All items listed by EAS are owned by EAS and are readily available for inspection ... moreat our facility in Mount Sterling. Kentucky. EAS personnel are available to answer any questions Monday– Friday, 8:00 am– 5:00 pm, EST. Machine/Item Condition: Unless otherwise stated. All machines or items are sold as-is in the condition depicted in the photographs. If there are concerns with functionality. Please contact us prior to bidding/purchasing. All equipment may be tested prior to sale at additional cost. Machines are generally not provided with manuals. Software, cables, etc. unless noted in the item description. All pictures are the actual photographs of the machine. It is safe to assume if you do not see something in the photographs. It is not included with the machine. We have a large variety of equipment and machines available. It is possible we have additional spare parts. Manuals, etc. that are not advertised with machine- please ask and we will check! We strive to represent all machines accurately and appreciate any feedback regarding inaccuracies in our listings. All items are available for inspection at our facility in Mount Sterling. Kentucky. Please contact Matt at matt@easiky.com or by calling 859.499.3455 to schedule an appointment. Warranty: Machine
2006 Speedline Electrovert VectraElite Wave Soldering System Vectra Elite Solder
Speedline Electrovert Series Wave Soldering System: Vectra Elite Vintage: 6/2006 Configured for Leaded Product Left to Right Finger Type Conveyor w/ Finger Cleaner Intermix Flexible Fingers(Intermix Ratio 75/25) Foot Length for“L” Finger: 3.0mm Width Adjust Lead Screw Covers Drip Pans Load End Interface Vectaheat Pre-Heat Zones 1 and 2 Bottom; Infrared Pre-Heat Zone 3 Bottom; Prewired for Top Side Preheaters Servo Spray Fluxer Externally Mounted w/ Extended Conveyor Rails Treated Stainless Steel Solder Pump. Flow-Duct and, Nozzle Standard Wave and a Chip Wave(with Rotary Chip Nozzle) Max Conveyor Width: 18 SMEMA Electrical Interface Electrical: 440V/60 HZ Serial# VC2-14667 Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available ... moreon most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communictions is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
LEAD FREE WAVESOLDER BRAND NEW! Wave Solder LeadFree
Econowave Plus u Lead Free Wavesolder TEAMCO Brand New Lead Free Wavesolder 18" Board Width Capability(20" also available) 6' Convection Pre-Heating Zone(IR heaters also available Dual Wave(Standard and Chip wave) Spray Fluxer Titanium Solder Pot and Fingers 100% Lead Free Design Roll out Solder Pot for Easy Maintenance Industrial Computer with Windows 2000 All Components are Highest Quality- Siemens PLCs. Mitsubishi Sensors, Panasonic Motors, Italian-made Wavesolder pumps Heat"boost" prior to entering wave area- important for Lead Free process control. Cooling zone after wave Finger Cleaner System Complete set of accesories Optional 2nd Solder Pot for Standard Tin/Lead Tin Wavesoldering- Use same wave solder for LeadFree and Tin/Lead applications- just roll out solder pot. Lead Free Ovens also available. More economical ... moreconfigurations also available. Installation and Training available. We have full stock of spare parts and can provide full-service support www.troysmt.com Many Systems Available
Electrovert Econopak Plus Wave Solder System+Fire Ext.
We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- Electrovert Econopak Plus Wave Solder System Model# EPK PLUS/400F With Chemetronics Fire Suppression System Model# MICRO1-EV FEATURES: Model Number# EPK PLUS/400F, Manufactured By: Electrovert See Table Below For Specifications Estimated weight at ~5000 lbs. 189 by 69 by 84 inches raw CONDITION: Condition looks to be previously installed and complete to our knowledge. CA# 2783 NOTES: don't buy if. TERMS& CONDITIONS: LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, computer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high ... morevoltage components, high pressure components, industrial automation components, industrial electrical components, lab& industrial ovens& furnaces, liquid pumps, machine tools, mechanical parts& assemblies, optical parts& assemblies, pneumatics, power supplies, rf radio frequency components, robotics, test and measurement equipment, ultrasonic equipment, vacuum pumps& components, valves and fittings, video components, wire. Cable& shrink tubing, Electrovert is currently owned by. This model is considered obsolete however you can find on line to inquire about their current models and information. For more information about Wave Soldering please visit Wikipedia's entry at: Below is the majority of the information available for the Electrovert Econopak Plus System we have been able to locate through the Internet. We are not able to confirm the accuracy of this information as it is from a third party. General Specs Standard Power Sources: 220 VAC. 3 Phase, 60 Hz 440 VAC. 3 Phase, 60 Hz 380 VAC. 3 Phase, 50 Hz, Power Consumption: Basic System: EPK-I, 1
Dover-Soltec 6622CC Wave Solder
Dover-Soltec 6622CC Wave Solder You are bidding on a Vitronics 6622C Wave Solder. Specifications for the machine are below: Manufacturer: Dover-Soltec Model Number: 6622C Serial Number: 0004602101 Input Power: 3x400V. 80A Dimensions: 153"L x 55"D Vintage: 2000 Features: 3 Bottom Preheat. Topside Reflecton, Aftermarket Spray Fluxer Asset Number: 5260 This machine is available for inspection at our facility in Mount Sterling. Kentucky, with appointment. Please contact Matt at 859.499.3455 or matt@easiky.com to schedule an appointment. Electronic Automation Services Inc. is a buyer and reseller of PCB Assembly equipment. All items listed by EAS are owned by EAS and are readily available for inspection at our facility in Mount Sterling. Kentucky. EAS personnel is available to answer any questions Monday– Friday, 8:00 am– 5:00 pm, EST. ... moreMachine Condition: Unless otherwise stated. All machines are sold as-is in the condition depicted in the photographs. If there are concerns with functionality. Please contact us prior to bidding/purchasing. All equipment may be tested prior to sale at additional cost. Machines are generally not provided with manuals, software, cables, etc. unless noted in the item description. All pictures are the actual photographs of the machine. We strive to represent all machines accurately and appreciate any feedback regarding inaccuracies in our listings. All items are available for inspection at our facility in Mount Sterling. Kentucky. Please contact Matt at matt@easiky.com or by calling 859.499.3455 to schedule an appointment. Warranty: Machines available for sale are provided on an as-is basis. With no warranty, expressed or implied. Assume before bidding that EAS has NOT tested the machine for functionality. EAS makes no guarantee as to the fitness of the machine for a particular purpose. We are always available to answer any questions you may have– please call 859.499.3455 or email matt@easiky.com. Payment Terms: Payment for equipment is expected within three(3) business days of p
Speedline Technologies Vectra 450/F Wave Solder
Speedline Technologies Vectra 450/F Wave Solder You are bidding on a Speedline Technologies Vectra 450/F Wave Solder. The specifications for this machine are: Manufacturer: Speedline Technologies Model Number: 450/F Serial Number: 11878599 Input Power: 240V. 3 Phase Features: 1999 Vintage. 2) Bottom Preheat(Convection) 1) Topside Reflection, 1) Topside IR; Foam Fluxer, Lambda/Chip Wave, Motorized Solder Pot, Manual Width Adjust Asset Number: 5147. This machine is available for inspection at our facility in Mount Sterling. Kentucky, with appointment. Please contact Matt at 859.499.3455 or matt@easiky.com to schedule an appointment. Electronic Automation Services Inc. is a buyer and reseller of PCB Assembly equipment. All items listed by EAS are owned by EAS and are readily available for inspection at our facility in Mount Sterling. Kentucky. ... moreEAS personnel is available to answer any questions Monday– Friday, 8:00 am– 5:00 pm, EST. Machine Condition: Unless otherwise stated. All machines are sold as-is in the condition depicted in the photographs. If there are concerns with functionality. Please contact us prior to bidding/purchasing. All equipment may be tested prior to sale at additional cost. Machines are generally not provided with manuals, software, cables, etc. unless noted in the item description. All pictures are the actual photographs of the machine. We strive to represent all machines accurately and appreciate any feedback regarding inaccuracies in our listings. All items are available for inspection at our facility in Mount Sterling. Kentucky. Please contact Matt at matt@easiky.com or by calling 859.499.3455 to schedule an appointment. Warranty: Machines available for sale are provided on an as-is basis. With no warranty, expressed or implied. Assume before bidding that EAS has NOT tested the machine for functionality. EAS makes no guarantee as to the fitness of the machine for a particular purpose. We are always available to answer any questions you may have– please call 859.499.3455 or emai
Vitronics Soltec 6622CC Wave Solder Machine LEAD FREE
Vitronics Soltec 6622CC Wave Solder Machine LEAD FREE. The Manufacturer's Description. Vitronics Soltec 6622CC Wave Solder Machine. LEAD FREE. Current Nozzle Configuration is 304mm(approx 12-inches) Can be upgrated to(Approx. 447mm(17-5/8 inches) or 498mm(19-5/8 inches) Nozzle at an additional cost. Barcode# 109685/BA Contact Us. Please don't hesitate to contact us through eBay or over the phone! All of our items are available for inspection or pickup at our Facility 8655 Suite B Production Ave San Diego. CA 92121 Hours: Mon-Fri 8-4:30 PST Phone# 858) 693-1991 Email: Sales@Wesource.com You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason ... moreyou are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
Speedline LEV CHEK 810/1510 Wave Solder Gauges
Speedline LEV CHEK 810/1510 Wave Solder Gauges. The Manufacturer's Description. This lot consist of 2 Wave Solder Gauges as follows: Speedline LEV CHEK 810 Wave Solder Gauge(28415) Speedline LEV CHEK 1510 Wave Solder Gauge(28416) These transparent. Tempered-glass panels have a reference grid to enable precise adjustments to be made to wave-soldering machines. Glass panel is loaded either into a holding fixture or directly into conveyor to simulate a board passing over fluxer, pre-heater and solder-wave. The pattern of flux and solder coverage can be observed from the topside. The glass panel can be momentarily stopped to make machine adjustments. Factors such as immersion depth, flux and solder distribution and uniformity, contact angle and wave stability are easily monitored and controlled. Asset#28415-28416/BA Contact Us. Please don't ... morehesitate to contact us through eBay or over the phone! All of our items are available for inspection or pickup at our store. R-1 Source Surplus Store 8651 Production Ave San Diego. CA 92121 Store Hours: M. T, Th, F: 10-4 PST, W: 10-6 PST Store Phone# 858) 693-1991 Email: Sales@Wesource.com Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms a
Electrovert Econopak Plus EPK+400/F Wave Solder System with Performa Fluxer
Electrovert Econopak Plus EPK+400/F Wave Solder System Serial number: 11872292 Date of manufacture: 1997 Equipped With Ultrasonic Systems. Inc. Performa Fluxing System Process width: 2" to 16" Entrance height from bottom of unit: 32.5" Exit height from bottom of unit: 46" Finger Cleaner Vectaheat Preheater 1245lb. capacity solder pot with Lambda Machine does not have solder in it 440 Volt 3 Ph 60 Hz 30.4 KVA Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very ... moreimportant and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13f1d2b2fb4-0xed-
Hollis GBS MK 3 Wave Solder Machine Certified Sn63Pb37
Hollis GBS Mark 3 Wave So lder Machine Model# 206132 Options/Features: 16.0" Dual wave with Z wave. Dual bottom-side IR preheats. Single top side IR preheat with enhanced preheat control upgrade Machine has approximately 300-400 lbs of Sn63Pb37 solder inside of it. Solder goes with the machine. Machine was fully operational at last use multiple years ago(2006/2007) Buyer responsible for shipping. Pickup preferred but we will work with you if shipping is necessary*
Technical Devices NU/ERA MP-18 Wave Solder Machine/ LEAD FREE
Technical Devices NU/ERA MP-18 Wave Solder Machine. The Manufacturer's Description. Technical Devices NU/ERA MP-18 Wave Solder Machine/LEAD FREE Flux Controller. Flux Density Control, Air Knife Control, 3 Zone Nitrogen Capable, 4 Top Preheaters and 2 3' Bottom Preheaters,Automatic Conveyor width and height, Smema interface and Finger cleaner. 480Vac 3PHZ 60HZ Barcode# 110090/BA. Contact Us. Please don't hesitate to contact us through eBay or over the phone! Email: sales@wesource.com Phone# 858) 693-1991 You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking ... morefee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f3ac3e514-0x104-
ECD WaveRIDER Super M.O.L.E. Gold Wave Solder Quality Management System Wireless
ECD WaveRIDER Wave Solder Machine Quality Management System Super M.O.L.E. Gold Lead Free Profiling Kit with Wireless RF Receiver Comes with everything pictured in the kit: WaveRider SuperM.O.L.E.® Gold 6-Channel Profiler. RoHS Compliant& Xpert-Ready Rechargeable NiMH power pack w/charging indicator LED. 1.0” Uni-Barrier stainless steel thermal barrier. Yellow Jacket Thermal Barrier Cover. Power Pack Charger[110 or 220 VAC] SuperM.O.L.E.® Gold to PC Interface Cable. Carrying Case. Super M.O.L.E. specs: Temperature measurement range: 200 to 2372°F(129 to 1300°C) Thermocouple: Six Micro. Type K& S, Accuracy: Within +/ 0.1% + 1°C, Resolution: 1°F(0.56°C) 0.1°F with MAP Software, Physical Dimensions: 0.37 in. x 3.5 in. x 6 in. 9.41 mm x 89 mm x 152.4 mm) Sampling Interval: 0.1 seconds to 24 hours, ... moreNumber of samples: 5460. With six channels active, Power Supply: Rechargeable Ni-MH Power Pack, Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: I do my best to ship items in 1 business day after payment is received. I do combine shipping on most items where possible. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: All items are sold as-is unless otherwise stated. Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our eb
Electrovert Pump1 Solder Wave Pump
Electrovert Pump1 Solder Wave Pump Used-Untested- 30 Day Money Back Any questions you can contact us at 507-864-7477 CUSTOMER SUPPORT Thank you for visiting JMW Enterprises eBay Store. JMW Enterprises is committed to offer high-quality and low-cost Electronic Equipment and Parts. Our primary mission is your satisfaction with our products and services. We try our best to ensure utmost customer satisfaction and make your eBay experience a great one. Have a question? Contact us via the Ebay Message Forum. 507-864-7477, or. Return/Exchange Policy- 30 days money back and replacement warranty terms start from purchase date. You may find durations and special conditions in item description. Shipping/Handling/Insurance costs are not refundable. Returns/Exchanges will not be accepted unless authorization has been issued by JMW Enterprises. To receive ... morean RMA(Returns Merchandise Authorization) number please send an message with Ebay's Message. Please include your eBay UserID. Item Number and details of the issue you are experiencing with your item. All products should be returned in original packing materials. Retail box with all included manuals, cables, software, etc. Contact Us We try our best to answer your questions in a timely manner and most of the time we respond in less than 1 Business Day. We are aware that the communication problems between the seller and the buyer could be frustrating if left unresolved. For Customer Service and Sales. You can contact us via the Ebay Message Forum. For any type of concerns or suggestions. Please contact us 507-864-7477 or. US Shipping and Payment Details Accepted Payment Methods: PayPal payment only Shipping Response Time: We ship with USPS. And UPS- we ship until 3:00 PM CDT- Monday through Friday. Any orders not completed the day of the order will be shipped the following day. We do not ship on holidays or weekends. Our 2013 holiday schedule is as follows: New Year's Day- Jan. 1. 2013. Memorial Day- May 27. 2013. Independence Day- July 4. 2013. Day after I
Wave solder machine - Electrovert MiniPak 300
New preheat New switches Full solder pot
Strekfuss Elektronic Wave Solder
Strekfuss Elektronik Wave Solder You are bidding on a Strekfuss Elektronik Wave Solder. The Specifications for this machine are: Manufactuer: Streckfuss Elektronik Model: EO44/L1400 Input Power: 3x220v 60Hz Features: Foam Fluxer. Wave pallet, Top side reflection Single wave. Manual operation, 3-preheat zones, 1 adj. wave pallet included. Dimensions: 143"L x 48"W Asset Number: 5085 This machine is available for inspection at our facility in Mount Sterling. Kentucky, with appointment. Please contact Matt at 859.499.3455 or matt@easiky.com to schedule an appointment. Electronic Automation Services Inc. is a buyer and reseller of PCB Assembly equipment. All items listed by EAS are owned by EAS and are readily available for inspection at our facility in Mount Sterling. Kentucky. EAS personnel is available to answer any questions Monday– ... moreFriday, 8:00 am– 5:00 pm, EST. Machine Condition: Unless otherwise stated. All machines are sold as-is in the condition depicted in the photographs. If there are concerns with functionality. Please contact us prior to bidding/purchasing. All equipment may be tested prior to sale at additional cost. Machines are generally not provided with manuals, software, cables, etc. unless noted in the item description. All pictures are the actual photographs of the machine. We strive to represent all machines accurately and appreciate any feedback regarding inaccuracies in our listings. All items are available for inspection at our facility in Mount Sterling. Kentucky. Please contact Matt at matt@easiky.com or by calling 859.499.3455 to schedule an appointment. Warranty: Machines available for sale are provided on an as-is basis. With no warranty, expressed or implied. Assume before bidding that EAS has NOT tested the machine for functionality. EAS makes no guarantee as to the fitness of the machine for a particular purpose. We are always available to answer any questions you may have– please call 859.499.3455 or email matt@easiky.com. Payment Terms: Payment for equipment is expected wit
ATF 11/25 Wave solder machine - Lead Free
Tested. Fully operational and complete. Solder pot full of lead free solder. 8 fixtures included with machine. Manuals. Ready to run! LOW COST- LEAD FREE WAVE SOLDER ATF 11/25 Wave Solder. With a process width of up to 250 mm offers the ATF 11/25 all what is expected from a up-to-date wave soldering machine. It comes with a dual wave as standard; lead-free compatible solder pot and spray fluxer is available. Foam fluxer presently in machine. Outstanding is the pump interlock: without any tools. They are dismounted within 10 seconds, then available space is no issue for thorough maintenance of the solder pot. The micro processor controller accurately controls the machine and is easy to operate. Optional: the ATF 11/25 can be operated with a PC too. Next to profile management the PC-software collects SPC data for process documentation. The ... moreATF 11/25 is available as nitrogen machine as well or could be upgraded at any time. Mankind Electronics Machinery dba Recon Inc. 704-795-6610
MINI-PAK-300 (F) Wave solder machine - Electrovert MiniPak 300 MINT LOW HOURS
1024x768 Minipak 300‘F’ Wave Soldering Machine NEAR MINT! LOW HOURS Manufacturer: ELECTROVERT Dimensions: 103"L x 36"W x 52"H(measurements for wave machine on STEEL table top) or 103"L x 33" x 27"H(measurements for wave machine ONLY) Approximate Weight: 2.000-lb's(with solder pot) Power: 220 Volt– 1 Phase Serial Number: MPK119196/0114 Item Condition: USED. Well cared for and looked after in NEAR MINT condition. SOLD AS-IS but in excellent 100% working condition. You will not find a Minipak 300 in better condition than this one. VERY low hours. Easy to operate. Set the fluxer and fingers for board size(12’ max width) and run the machine. That’s it! Item Description: This Minipak 300 includes a FULL solder pot worth thousands.$$$$ Item can ship WITH or WITHOUT the fully enclosed bottom metal stand. Shipping ... morewithout this stand will save on the freight costs. LOCAL PICK-UP. FREIGHT SHIPPING AND PAYMENT MUST BE MADE 3 BUSINESS DAYS. Final Sale Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
Electrovert Selectaspray Wave Solder Spray Fluxer
This electrovert selectaspray was purchased new by our company in 2005. It came off the line in working condition. It includes the control unit as well as the spray system for inside the wave solder machine and a flux tank. Everything you need to install and run. Free crating available. We can provide freight quote to your facility. Posted with
Vitronics Prism wave solder
Very nice condition small footprint wave soldering machine. Unit was in good working condition upon removal of service. SHIPPING: Local pick up or unit can be skidded and shipped via LTL. BUYER to pay all shipping charges.
NovaStar 14FS Wave Solder Machine
NovaStar 14FS Wave Solder Machine. The Manufacturer's Description. NOVASTAR 14FS Single Wave Solder Machines Wave Width: 14" 350mm) Max Wave Height: 0-3/8"0-10mm Solder Pot Capacity: 500 lbs(225 kg) Solder Pot Power: 4.5 kW Compressed Air: 10 CFM@ 60 PSI(17 m3/hr@ 4 bar) Approx Warm-up Time: 100 minutes Max Preheat 1 Temp: 356° F(180°C) Max Preheat 3 Temp: 428° F(220°C) NOTE: Solder is NOT included Asset# 110759/BA. Contact Us. Please don't hesitate to contact us through eBay or over the phone! Email: sales@wesource.com Phone# 858) 693-1991 Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. ... moreIf the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
ELECTROVERT WAVE SOLDER MACHINE RUNS GREAT
THIS WAVE SOLDER MACHINE IS BEING SOLD AS IS. THIS IS IN USED CONDITION AND WORKED FINE WHEN WE USED IT. IT HAS SAT FOR A FEW YEARS YOU MUST PAY SHIPPING IT WILL BE SOLD FED EX FREIGHT. ALSO ONCE YOU PURCHASE THIS YOU MUST TELL ME IF YOU WILL NEED FED EX TO GET THIS OFF THE TRUCK FOR YOU BECAUSE THAT DOES REFLECT THE FED EX SHIPPING PRICE. PLEASE REVIEW ALL PICTURES FOR DESCRIPTION. PLEASE EMAIL WITH ANY QUESTIONS.
Electrovert Electra 8-1701-005-03-6 Wave Solder Flow Machine
This is for a used working Electrovert Electra 8-1701-005-03-6 Wave Solder Flow Machine. Serial Number: 11876530. Date: 3/99, Volt 480, KVA95, PH3, HZ60. This machine has been used for circuit boards with lead solder at Tektronix, Inc. in Beaverton, Oregon. It has an ultrasonic system and a C02 fire suppression apparatus. Acceptance of the following terms will provide your ownership: In addition to the $100.00 Buy-It-Now- Buyer is responsible for the removal and removal charges. Buyer is responsible for shipping/ shipping arrangements/ shipping charges. As is. Where is" No Return" Pickup address and contact information will be given upon winning bid and the acceptance of the terms/conditions mentioned above. NOTE: All inquiries will be responded to on the week of September 23rd. On a normal business week. Thank you. Method of Payment: ... morePayPal. Visa, Master Card, Discover, American Express- payment in full within five days of winning bid. Buyer/Winning Bidder is responsible for Shipping Charges and Shipping Arrangements/ Removal and Removal Charges of Solder Flow machine. AS Is, Where IS. Wave Solder Flow Machine needs to be removed within 30 days of of winning bid date. NOTE: WE DO NOT SELL OR SHIP OUTSIDE THE USA.
Air Vac PCBRM-12 Solder Fountain Mint Condition AirVac Solder Pot Wave Solder
Air Vac PCBRM-12 Solder fountain for sale in excellent condition. This unit is used but it looks and functions like new. I acquired this unit in new unused condition when I put it into service in my facility. It was gently used for a period of time and has been idle since them. If you look carefully at the photos you can even see the plastic protective"peel away" still on the face of the timer module. If you are not familiar with this model it will continuously pump a flow of molten solder for as long as you set the timer or hold down the foot pedal. It is perfect for soldering components into PCB's or any other assembly that you can fixture above the flow. It has adjustable arms that move on ball bearing linear slides and lock in place. The whole fixture assembly also moves left and right on ball bearing linear slides and moves ... moreup and down via the thumb wheel in the front of the machine. It has many function modes and can be set up for production in a matter of minutes. This unit also has a rework mode wherein the solder is flowed to make the component connections molten then the user lowers the arm from above that injects compressed air through the nozzle to"blow" the solder back into the bath out of the PCB. Included in the sale are 3 solder nozzles(pictured) and 1 air nozzle(attached to the vertical air boom) The Start Stop foot pedal is also included. You will not find a better specimen on the market anywhere. You will not be disappointed. The quality of this unit is outstanding. It is made in the USA and it shows. The user manual is available online free of charge. The retail cost of this machine when I bought it was over 13.000.00 and I am sure it is more now. I am not a broker or dealer I was an end user and know the quality and versatility of this machine. You will be happy when you get it. This unit is heavy it weighs about 150lbs so it will have to ship truck freight at the buyer expense. I will professionally crate and skid it to ensure it arrives to you ready for service. I ca
Herbert Steckfuss Typ E023 Wave Soldering System + Solder & Kester 979 959 Flux
Herbert Steckfuss Typ E023 Wave Soldering System + Solder& Kester 979 959 Flux Herbert Steckfuss Typ E023 Wave Soldering System + Solder& Kester 979 959 Flux Unit was removed from a working environment. But only includes the items pictured. The solder pot is full. The power cord has been removed(will require wiring) The electronics appear to be in excellent condition. Details: Manufacturer: Herbert Steckfuss Model: Typ E023 Nr: 94-101 Voltage: 3x220 Watts: 5.5kW Pneumatic: 6 bar Includes Kester 979 and 959 Flux Includes spare fuses and schematics This unit will ship via ground freight. Please contact us for a quote. Local pick-up is always welcome. Condition: Good cosmetic condition with signs of previous use(See photos for more detail) Tested: Unit was removed from a working environment. But needs to be wired for power. We are unable ... moreto test it. Warranty: As-Is. No Returns SKU: 393530 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax ID is provided for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty th
Wave Solder - DEKTEK LFW-450
Machine is like new. Less than 100 hours of use. A full description and working demostration follow in the 2 videos below: Video 1: Video 2: This is a lead free machine. It was lasted used for lead alloy. It is being sold with ca.1000 lbs of Lead Alloy in pot. A 8.650.00 value on top of machine. SHIPPING: Unit weighs around 3000-4000 lbs. The lead alloy included weighs another 1000 lbs. We have a loading dock where the machine can be wheelled onto a semi and blocked to floor. We can load and block for the customer. But FOB is our dock and we do not warrant shipping/transit of the machine. We strongly recommed shipping with air ride carrier. Buyer pays all shipping costs. Machine is sold as is. It was last used and run when demo videos were made. Please call with questions: 407-792-2211.
NAED Wave Solder Model #BWS2171
NAED Wave Solder Model#BWS2171. Please email with any questions. Thanks, Posted with,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1432420afeb-0xf7-
Tamura HC40-60SNX Automatic Soldering System ; 2007 Vintage Dual Wave Solder
Tamura HC40-60SNX Automatic Soldering System Serial# 4193 2007 Vintage. Power: AC 208V/ 4 kVA Weight: 2300 kg. Includes: Spray Fluxer Dual Wave Automatic Pallet Return Top Side Preheat Touch Screen Control Currently running 10" pallets. Can be expanded up to 18" pallets Manual Package. Transfer width: 250mm- 400mm Applicable pallet dimension: Max. 400(W) x 400(L) x 1.6(t) mm Min. 250(W) x 200(L) x 1.6(t) mm Parts height top side clearance 70 mm or lower Lead length 10 mm or lower Substrate transfer direction: Right to left when you face against the operation panel Transfer speed: 0.4- 2.0m/min(stepless speed variation) 2.0m/min is the achievable speed by the system. It may not be a suitable speed for soldering operation. Transfer height: 900 mm from floor to surface(insertion entry) Soldering capacity: Approx. 720 kg. Required time ... morefor melting solder: Approx. 2 hours. Overall dimensions: 6050 mm x 1820 mm x 1970 mm. This system consists of the following component units: Fluxer conveyor Nozzle unit Flux feed tank Upper primary filter Under primary filter Secondary recovery unit Chain washing unit Inlet chain conveyor Middle part chain conveyor Pre-Heater Flowing solder bath Cooling unit Holder-less conveyor Outlet chain conveyor Control box N2 Piping unit Outlet traverse Return conveyor Pallet slide. Includes instruction manuals Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price
Technical Devices Nu/Era 15" Dancer Dual Wave Solder Machine
Technical Devices Nu/Era Dancer Dual Wave Solder Machine. Model: NU/ERA 15" Dancer Wave Machine. Serial# 4288-365. Power: 230 VAC/ 3 Ph/ 60 Hz/ 50 Amp. No Solder in Pot. Buyer is responsible for shipping International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so ... moreplease talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
Novastar 13" finger wave solder machine
Novastar Model 13FD Sn NTI-13FS9308105 13" Finger wave. Foam Fluxer, 3 zones preheat, 63/37 solder in 400 lb pot 220 V. This machine was mfg in germany originally and you can still get all parts except for the controller. We powered this machine up and all works, theres 3 ceramic preheat rods on each side(6 total) that REALLY work well. The only thing is its low on solder probably needs around 100lbs maybe less as youll see in the video but you can also see it works. FYI I cleaned the heck out of this thing after the video so go back and look at pics again after viewing it! It could still use more cleaning inside the previous users werent neat thats for sure. Pick up from my craters 85040, custom skid $225 You tube link
SEHO 8240 MWS 8200 LEAD-FREE WAVE SOLDERING MACHINE FULL OF SOLDER #3
SEHO 8240 MWS 8200 LEAD-FREE WAVE SOLDERING MACHINE FULL OF SOLDER#3 Make: Seho Series: MWS-8200(MWS8200) Model# MWS-8240(MWS8240) Eco-F Serial# 9904 27736 Build Year: 1999 Listed Power Specs: Voltage: 3 x 208V/ 60Hz/ 4W Rated Power: 23.000, Overall Dimensions: Approximately 10' wide) x 5' deep) x 72" high) Includes all/only items pictured. Here is some information from the manufacturer. Please note that this is general info on the MWS 8200 series. This listing includes the machine described above and pictured below. Please call or email if you have any questions regarding this system. Soldering System MWS 8200 Modular Wave Soldering System for Medium- and Large Production Environments. Advantages: Modular additions possible. Grows with yourrequirements Flexible because of a multitude of possibleconfigurations- A choice of fluxers- ... moreA choice of pre-heaters(Length. Type of HeatTransfer: IR/Convection) A choice of control concepts, Convection pre-heater for homogeneous andgentle heating Highest soldering quality due to SEHO's double-wave system Economical soldering because of high-performance functional elements Optional: nitrogen hood ALIX?LT for a localizedinert atmosphere Excellent accessibility due to an ergonomical design Visual access into process area offers direct information Modularity of control system allows updating User friendly with graphic visualization VDM: Visual Representation of EquipmentFunctions High process reliability due to feed-back loops SPC Statistical Process Control, The Future. The Wave Soldering System 8200 has been developedto meet the requirements of large and medium sized production. As its major advantage must be seen the ability to grow with your requirements. SEHO has incorporated a full range of options to allow for greatest flexibility. Should your requirements change in the future. The Power-Line MWS 8200 PWR can be upgraded without difficulties. For example. If you find tha
Malcom DS-02 Measure wave solder information Dip tester cc15a
Malcom DS-02 Measure wave solder information Dip tester Inventory Location: cc15a Wave Solder information Pre-heat Temp 50-200C Solder temp 0-300C Dip Time 0- 10 Sec Size 95x200 Lx65 H mme flat, Malcom DS-02 Measures Wave Solder information Pre-heat Temp 50-200C Solder temp 0-300C Dip Time 0- 10 Sec Size 95x200 Lx65 H mm. Please leave positive feedback we will do the same for you Thank you for contacting Quality Manufacturing Services Inc. If you have any questions? Please do not hesitate to call us in San Diego. Best regards, Terms and Conditions You are purchasing a USED ITEM. The item appears to be in good physical condition and it came from a working environment however we do not have the facilities or in some instances the knowledge to thoroughly test the item. All items are sold AS IS and listed measurements(Length. Width, Height, Weight) ... moreare approximations. Our RETURN POLICY is to fully refund your purchase price if you meet the following: 1. You advise us within seven days of receipt of the item that you intend to return it AND 2. You effectuate the return within 14 days from receipt of the item AND 3. You pay for the return shipment. We are firm on this policy. We ship economy/ground USPS. FedEx or UPS unless otherwise requested and paid for by purchaser. We also will ship via YOUR FedEx or UPS account if so requested. If freighting is required we will arrange for the freight company or will work with the freight company you designate. All freighted items are F.O.B. meaning our liability for the freighting ends and yours begins as soon as the item is properly loaded onto the freighting company’s truck or other transportation entity. Shipping/freighting insurance. If desired, is your(Purchaser’s) responsibility both to arrange and pay for. In the event a package is received damaged, you(the Purchaser) are responsible for initiating the claim and for keeping all original boxing and packaging so the carrier can inspect and properly initiate the claim. We accept payment in the following forms: Pay Pal,
PCB Wave Solder system - Electrovert Econopak Plus
FOR SALE PCB Wave Solder system- Electrovert Econopak Plus Model: Electrovert Econopak Plus Datecode: 1992 Was working when we removed it from production. However. It is now offline in storage and cannot be tested. Best purchased for parts or scrap. BUY IT NOW FOR THIS PRICE OR CONTACT US FOR PRICE NEGOTIATION. PLEASE NOTE: PRICE DOES NOT INCLUDE SHIPPING. WE WILL NOT SHIP THIS ITEM. YOU MUST COME AND PICK IT UP, OR HIRE A SHIPPING/FREIGHT COMPANY TO COME PICK IT UP FOR YOU.
OK Industries Inc SA-5201 Wave Solder *VIDEO IN DESCRIPTION*
OK Industries SA-5201 Wave Solder. As you can see it is still in good working condition. This unit was approximately $3.000 new. I can't find anymore of this same model online anywhere. So this very well may be the only one out there for sale. Also comes with Gloves. The shipping charges are high. But this machine is very heavy due to the amount of lead and tin. Please feel free to inquire for more information. We only ship to the Lower 48 states.
NU/ERA JR. 16" WAVE SOLDER
Model: NU/ERA JR. 16" Wave Solder. Serial: 7094-270. Power: 208V 45 amps 3 phase 60Hz. Machine is sold as is Untested. Please review all the pictures and ask questions before bidding. Local pick up. Buyer can arrange Freight pick up as well. Please contact me with questions. 855) 692-5321.
wave solder titinium stiffeners
What you are bidding on is approximately 30 titanium wave soldering stiffeners. The lengths are 3-5 inches
Electrovert Vectra Wave Solder with Fluxer ; 2" - 18" wide Wave Soldering System
Electrovert Vectra Wave Solder Does include a fluxer but will be slightly different than the one pictured 1999 Vintage Serial# 11877123 480 Volt 3 Phase 67.1 kVA 60 Hz Overall dimensions: 182" x 57.2" x 67" not including light tower) Process width 2" 18" Preheat length up to 6 feet Preheat configuration: Convection. Convection, IR and IR Topside in last zone Exhaust requirements: Two(2) 6" stacks; each requires 700 cfm@ 1" H20 static pressure Air requirements 60- 120 psig Nitrogen requirements 0.5" FNPT inlet fitting UL listed and CE compliant No solder in pot Buyer is responsible for shipping International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any ... moreissue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
2006 Technical Devices NU/ERA 18 MP Lead Free Wave Solder Machine
The machine has been cleaned inside and out. The motors, pumps, solder pots, fingers, controls, and electrical components have been tested. 2006 TD Wave Lead Free Solder Machine has been through various stress tests to ensure it is fully operational on your floor. 2006 Technical Devices NU/ERA 18 MP WSM Lead Free Wave· Single Wave· Machine comes with transformer· Complete Titanium Solder Pot· 450mm(18” Titanium Finger(V-V-L) Left to Right Conveyor· Motorized Entrance Guides· Finger Cleaner· Internal Spray Fluxer· PC Controlled· 4 Convection Pre-heaters· IR Boost Heat· 480 Volts. 3 Phase, 65 amps· 4.75' wide x 11' long rail to rail OPERATION MANUAL INCLUDED! Shipping: Shipping is handled by buyer. The Machine will be available for pickup within 1-2 weeks after we’ve received ... morepayment. Warehouse is located in Anaheim. CA. Feedback: Looking forward to a pleasant transaction. We will do everything we can to ensure you’re happy. Questions: If you have any questions don’t hesitate to ask. We can provide more information. Pictures, and answer any questions.
NU/ERA JR 16" Fully Automated Wave Solder
NU/ERA JR.16 Industrial Fully automated Wave Solder Machine. This machine comes with 5 Stainless steel fully adjustable pallets. It has a titanium solder pot. Which we currently have filled with 400lbs of Kester Ultra Pure 63/37 Lead Free Solder. The low pressure foam fluxer is in great shape with No corrosion. We have recently had a new track motor installed along with a new ventilation exhaust pump motor. All the controls work and are still in great shape. The preheating oven works great. This Wave Solder is designed to use 3 Phase 208 volts 48 Amps. Please contact me for more information at git1@cox.net Shipping will be on the buyer but I will do the best I can helping you find a company to ship the Machine to you The Current Weight of the Machine is approximately 1800Lbs. And is 102inches long. 70inches wide, and 54inches High. The Buyer ... morecan pay by Credit Card or Wire transfer. This Item must be paid for with in 3 days of purchase.
Minipak Electrovert 200, Wave Solder
Hello. We are a SMT manufacturer. We bought this machine when we first started becuase we thought we would need a Wave Soldering Machine but once we set up our product line we realized that we do not need this machine. It is old but it is all there and we have powered it up and ran air through the airlines. You are welcome to come look at it. Thanks, Josef 949-784-9047.
TDL Dual Wave Solder Machine
TDL Dual Wave Conveyor System. Includes 20" rack. 220 Volt 45.0 Amps 3 PH Includes several racks Shipping and Handling not included. Local shipping is free. I will disassemble and crate for $ 125.00. Buyer pays for freight company
WAVE SOLDER OPTIMIZER WITH CD
I HAVE NO WAY OF TESTING THIS. It has the case and CD.
2009 SY Manncorp Mini Wave Selective Solder Fountain Rework Machine LEAD FREE
2009 SY Mini Wave Solder Fountain Rework Machine LEAD FREE This same unit was sold by Manncorp a few years back. Includes 5pcs titanium nozzles Excellent Working Condition. Only normal signs of use 2009 model year Actual photos. Includes exactly what is shown. Buyer is responsible for freight shipping charges. The unit is a little on the heavy side. We assume no responsibility for damage or actions resulting from the use or misuse of items sold. It is the responsibility of the buyer to determine the applicability and safety of each item to their particular use. By placing a bid or purchasing you are acknowledging and accepting these terms.
ELECTROVERT (SPEEDLINE) WDC STD WAVE DIPPER / SOLDER FOUNTAIN
Please note: shipping is available just not through eBay system however buyer is responsible for arranging own packaging. Shipping&or insurance due to size/weight or value of equipment. Weight& dimensions are listed below. Optional packaging services available, please inquire* Electrovert(Speedline) WDC STD Wave Dipper/ Solder Fountain Features are as follows: Solder temperature regulated by control indicator thermocouple temperature sensor Omron E5CS °F Digital Temperature Controller Lid for maintaining solder temperature& keeping solder clean Full of solder Solder pot dimensions: 10.5 L x 6" W x 2-1/2 to 3" D(approx. Fountain dimensions: 4" diameter x 1-1/2" H Shown on metro cart(cart NOT included) Input Power: 220V. 1 Phase, 60 Hz Dimensions: 22" L x 12" W x 12.5" H. Approx. 185 lbs(est. ... moreactual weight– not including pallet weight) Mechanical condition: Used– tested operational. Plugged unit into wall. All motors/fans sound operational. No broken or missing function buttons. No further testing was performed as to temperature accuracy. Video upon request Cosmetic condition: unit is used& does show signs of normal use– see photos for details Please note: if you require shipping services other than stated or you wish to use your own UPS account( preferred! please request prior to payment/shipping. Please note: Purchaser/buyer responsible for packaging. Shipping, etc. due to size/weight or value of equipment. Optional packaging services available. Please inquire. Item located@ ground level facility in Edgewood. NM 87015(approx. 30 min. east of Albuquerque, NM) Questions– please contact us prior to placing and offer/purchase and specify the item number please. Payment: Payment must be received prior to removal&or shipping. New Mexico residents add 8.19% unless NM Non-taxable Transaction Certificate remitted with payment. We accept PayPal& other forms of payment; please see selections below. Please visit our ebay store for more great items. We specialize
Reduced! Speedline/Electrovert "LEV CHEK" Wave Solder 12"x 12" Calibrating Plate
Speedline/Electrovert Wave Solder Glass Calibrating Plate Part# 2-8015-044-00-0 12" x 12" 1/8" Thick The Wave Solder Glass Calibrating Plate is a tempered glass panel designed to monitor flux coverage. Wave shape, wave turbulence, leveling of the conveyor and other wave soldering quality factors. This unique method of topside observation of the actual"wave-to-board" contact is helpful in identifying proper angle of contact, flux movement across the board, displa cement flushing action. Direction of solder flow, and meniscus velocity at the break away of the solder contact. It also allows visual top-side observation of wave impingement on board surface for skips or turbulence. SMT.Reflow,Wave,Solder,Wash,Board,Circuit,Production,Screen,Printer,Test,Electronic,Stencil,Cleaner,Motor,Bare,Component,Chip,PIP,Pick,Place,New,Used,Switch,Disconnect,Gear,Feeder,wire,hose,wash,conveyor,Oven,Heating,Element,v,volt,hz,hp,Control,panel,pump,fuse,pins,plate,guide,support,blades,holders,wipe,roll,
Hakko 485 flow solder mini wave lead free soldering system
Hakko 485 flow solder mini wave lead free soldering system Powered by Hakko 485 flow solder machine for low volume/ rework of thruhole components Flow soldering pot that enables pin-point heating using nozzles matching components, Pay with your credit card through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS. FedEx, DHL, or USPS. International buyers, please be aware that you may ... moreincur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. PFI of Florida: 607 Savage ct longwood. FL 32750 Telephone: 4078224499. All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 7 days and will be responsible for all additional shipping charges. We do our best to present accurate. Detailed information about every item we sell. If you have any questions, please contact us before placing your bid. PFI is a Florida Corporation who has been doing business since 1981. We are available 5 days a week from 8-4. Our main phone number is 407-822-4499. PFI of Florida has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type. Condition and image of the goods at the time of sale. PFI of Florida makes no express or implied warranti
Technical Devices NuEra Wave Solder System
NuEra Wave Soldering System with Edge Hold Finger Conveyor including preheater and dual wave solder pot. Good parts machine!
Electrovert Astrapak Solder Wave with 63/37 Solder in the Pot.
Electrovert Astrapak solder wave with an almost full pot of 63/37 Tin/Lead solder. Machine has been powered on and tested. Can be demonstrated if needed. L to R board flow. V Ribbed Fingers, Foam Fluxer, IR Pre-heater, Main Lambda Wave, The flow duct and nozzle for the Chip Wave is present but not sure of condition, motor for the Chip Pump is not present) Finger Cleaner brush box(no pump/ fluid delivery system present with the finger cleaner) in very good condition for it's vintage. No manuals or supporting documentation. Used. Sold As Is. 220VAC 3 phase Compressed air used for the Conveyor Up/Down feature. FOB: Minnesota Rigging and pallet available for an additional cost.
2005 Novastar 14FDE Wave Solder
2005 Novastar 14FDE Wave Solder Fully Operational Low Hours Has Manual 220 VAC Foam Fluxer 1 Gallon 500lb. Solderpot Max Wave Height 10mm Max Pre-Heat 356F/180C Max Solder Temp 575f/300C Warm Up Time 100min. Compressed Air 10cfm 60psi Exhaust 2 6" 300 CFM(600 Total) Contact Us For Demo Video Link! Buyer is Responsible for Shipping Machine Can Be Skidded and Ship-Secure Ready For Additional Fee. Contact For Details! SMT.Reflow,Wave,Solder,Wash,Board,Circuit,Production,Screen,Printer,Test,Electronic,Stencil,Cleaner,Motor,Bare,Component,Chip,PIP,Pick,Place,New,Used,Switch,Disconnect,Gear,Feeder,wire,hose,wash,conveyor,Oven,Heating,Element,v,volt,hz,hp,Control,panel,pump,fuse,pins,plate,guide,support,blades,holders,wipe,roll,
Streckfuss EO22 pallet wave solder machine with 63/37 solder
This is a streckfuss dual wave solder machine with 4 pallets. Foam fluxer 3 zones of preheat full of 63/37 solder in perfect working order. 220V 30amp To fully crate this item is $593.00 for skid and a wrap $213.00 Item can be picked up via truck at craters zip code 85009
Air-Vac Rework Station Wave Dipper / Solder Fountain WE SHIP
Air-Vac Model PCBRM-10 SMT Rework Station This unit is very clean and ready to work. 208/220/240V 2500W 50/60Hz Soldering and rework station Unit has a 2599 watt heater. Goes to about 620°F(sufficient for no-lead operations) Used-Tested- 30 Day Parts Only Warranty Any questions you can contact us at 248-765-9899 PAYMENT INFORMATION: We accepts Bank Wire(Transfer) PAYPAL, and cash in person. All items must be paid in full before they are shipped. Taxes: Prices do not include any federal. State, or local taxes, which are in addition to the purchase price and must be paid by Buyer. Any and all foreign duties, custom broker fee and taxes are the responsibility of Buyer. Unless Buyer furnishes ANIMATRONICS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of ... moreBuyer. The failure of ANIMATRONICS to invoice such taxes does not excuse the Buyer from responsibility for paying same. CUSTOMER SUPPORT Thank you for visiting our eBay Store. We are committed to offer high-quality and low-cost Electronic Equipment and Parts. Our primary mission is your satisfaction with our products and services. We try our best to ensure utmost customer satisfaction and make your eBay experience a great one. Have a question? Contact us via the Ebay Message Forum. 248-765-9899, or. Please Note: We are not responsible for shipping damage. We are purchasing Shipping Insurance on every shipment. The cost is included in your shipping. Buyers must inspect the merchandise for damage BEFORE accepting delivery for us to file a claim on your behalf. If there is visible damage. You must have the driver note the damage on the delivery receipt and sign it. Never accept damaged merchandise without making notations on the Delivery Receipt and having the driver sign the receipt. Return/Exchange Policy- 30 days money back or replacement warranty terms start from purchase date. You may find durations and special conditions in item description. Shipping/Handling/Insurance c
Electrovert Wave Dipper / Solder Fountain / Rework Station /Solder wave/We Ship
Used-Tested- 30 Day Parts Only Warranty Manufacturer: Electrovert(Speedline) Type: Wave Dipper/ Solder Fountain Model: WDC STD 110 Condition: Used– very good condition Video upon request Price: USD Quantity: 1 Type of Seller: Manufacturer Owner Description: Electrovert(Speedline) WDC STD Wave Dipper/ Solder Fountain Features are as follows: Solder temperature regulated by control indicator thermocouple temperature sensor• Digital Temperature Controller• Full of solder• Solder pot dimensions: 10.5 L x 6" W x 2-1/2 to 3" D(approx. Fountain dimensions: 4" approx. rectangular x 1-1/2" H• Shown on metro cart(cart NOT included) Input Power: 110V. 1 Phase, 60 Hz 14.4 Amps• Dimensions: 22" L x 12" W x 12.5" H. Approx. 185 lbs(est. actual weight– not including pallet weight) Mechanical condition: Used– tested operational. ... morePlugged unit into wall. All motors/fans sound operational. No broken or missing function buttons. No further testing was performed as to temperature accuracy Cosmetic condition: unit is used& does show signs of normal use– see photos for details Used-Tested- 30 Day Parts Only Warranty Any questions you can contact us at 248-765-9899 PAYMENT INFORMATION: We accepts Bank Wire(Transfer) PAYPAL, and cash in person. All items must be paid in full before they are shipped. Taxes: Prices do not include any federal. State, or local taxes, which are in addition to the purchase price and must be paid by Buyer. Any and all foreign duties, custom broker fee and taxes are the responsibility of Buyer. Unless Buyer furnishes ANIMATRONICS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Buyer. The failure of ANIMATRONICS to invoice such taxes does not excuse the Buyer from responsibility for paying same. CUSTOMER SUPPORT Thank you for visiting our eBay Store. We are committed to offer high-quality and low-cost Electronic Equipment and Parts. Our primary mission is your satisfaction with our products
Wenesco solder fountain rework wave solder selective soldering system working!
Wenesco Solder fountain like Airvac PCBRM fully operational with laser pointer heats to temp and solder pump is working fully of solder
Automated Production Systems Cold-Wave Solder Pot, For Parts & Repair
Untested/Unknown Automated Production Systems Cold-Wave Solder Pot. For Parts& Repair Automated Production Systems Cold-Wave Solder Pot GW-10 Has Been Plugged In And Does Heat Up Holds 50lbs Of Solder No Other Information Available No Accessories Included. Sold As-Is For Parts Or Repair Please Read Terms and Conditions USA Sales Only All auctions must be paid for with in 10 Days of end of auction. All items are SOLD AS-IS Unless otherwise stated in the auction. All end of auction notifications will be sent to your registered Ebay email address. We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. If for some reason an item has to be returned to CTR Surplus the Buyer will have to pay the return shipping. The original shipping charges are not refundable. ... moreAll returns are subject to a 20 percent restocking fee. For any return you must email CTR Surplus with in 3 days of receipt of the item. Please ask all questions before placing a bid. Most items will be shipped UPS Ground and automatically insured for the bid amount. Any item that requires Truck Freight will require Buyers phone number and someone to unload the item from the truck(The Freight Company Will Not Unload The Truck) CTR Surplus 202 W. Livingston Ave Crestline Ohio 44827 Phone 419-683-3535 Fax 419-683-3230 All Auctions Will Be Automatically Insured For Final Bid Price Please click here to see my other auctions. 7.25% Sales Tax Will Be Charged On Item Price And Shipping On All Ohio Sales Powered by SixBit's eCommerce Solution
2003 Manncorp ATF 20/33 F Wave Solder
2003 Manncorp ATF 20/33 F Wave Solder Solderpot Has Leaded Solder(FULL) 230V Foam Fluxer Stand See Pics For Details Came from a small SMT Facility. Low Hours!Buyer Must Arrange All Shipping! Can Be Skidded and Ship-Secure Ready For Additional Fee. Contact For Details or Questions! SMT.Reflow,Wave,Solder,Wash,Board,Circuit,Production,Screen,Printer,Test,Electronic,Stencil,Cleaner,Motor,Bare,Component,Chip,PIP,Pick,Place,New,Used,Switch,Disconnect,Gear,Feeder,wire,hose,wash,conveyor,Oven,Heating,Element,v,volt,hz,hp,Control,panel,pump,fuse,pins,plate,guide,support,blades,holders,wipe,roll,Industrial,Capital,
Hakko 485 (485-V12) Mini Wave Selective Solder Fountain Rework Machine
Hakko 485(485-V12) Mini Wave Selective Solder Fountain Rework Machine Unit is in working condition. The top cover is not included. Comes exactly as pictured. This will be shipped via UPS Ground. It is packaged and ready to go! International buyers are responsible for any applicable import/duty taxes in your country. International return shipping non refundable. See what others are saying about how fast our shipping really is! We assume no responsibility for damage or actions resulting from the use or misuse of items sold. It is the responsibility of the buyer to determine the applicability and safety of each item to their particular use. By placing a bid or purchasing you are acknowledging and accepting these terms.
(2) FANCORT Wave Solder Fixtures
2) FANCORT Wave Solder Fixtures. The Manufacturer's Description. 2) FANCORT Wave Solder Fixtures Outer Dimensions: 13-7/8 x 18-3/4 inches Asset# 39623/BA. Contact Us. Please don't hesitate to contact us through eBay or over the phone! Email: sales@wesource.com Phone# 858) 693-1991 Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all ... moreacross the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
Speedline ELECTROVERT VECTRA 450/F Wave Solder machine
Wave Solder Machine July 2001. Flexible titanium fingers. IR heaters 2 bottom 1 top, Foam Fluxer, Lambda and Omega Wave, Unit is currently in production. Leaded solder. Buyer responsible for shipping. Machine can be crated for additional fee. Sold As is. Located USA.
Electrovert Econo Pak Plus 18" Wave Solder New 1997 440/480 Volt 3Ph
Electrovert Econo Pak Plus 18" Wave Solder New 1997 440/480 Volt 3Ph Make: Electrovert, Type: EPK+400/F, Serial# Available For Serious Inquiry Elec: 8-1909-001-02-2, Mfg Date: 7/97, Volts: 440/480 Volt, 3 Ph, KVA: 30 4, 60 Hz, Asset Available With Or Without 63/37 Solder, Omega Plus Lambda Wave, 2 Convection Pre Heaters, Optima Spray Fluxer, Hood And Venting Also Available With Asset Asset Was Under Power And Running Untill Removed From Line, Rigging.Skidding& Hauling Not Included In Asset Sale Price, You will receive an invoice via email or Ebay for the full amount owed. Including shipping. Please do not pay until you have received the invoice. Items not paid within 10 days from the end of an auction will be relisted. Payments by check will be held up to 4 days until the check clears. We can ship by LTL. Partial or full, van or ... moreflatbed, double drop, or export container. Freight costs are to be quoted at the time of sale. All freight costs are to be paid by the buyer prior to pickup. Please contact a sales representative for a shipping quote. We ship within 5 business days of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs. ship via UPS ground. Freight may be booked with any carrier. But usually goes out on the best available. Extra shipping charges: Lift gate truck- Add $128 Residential Delivery- Add $80 If a rigger. A lift gate truck, or a residential delivery is necessary, please notify us prior to quoting shipping. If buyer chooses to use their own freight. Shipping account, and or carrier, they will be responsible for all scheduling, paperwork, claims, and any damages incurred in transit. Local pickup is always welcome. No handling fees apply on local pickup. Any item not picked up within 30 days from the end of an auction will be charged 10% of item(s) cost per month for storage. You are bidding on a used item. Please be sure to ask any and all questions prior to bidding. SOLD AS IS/WHERE IS. We will do our best to answer specific questi
Technical Devices Nu/Era MP Dual Wave Solder Machine
Nu Era wave solder machine works great
Electrovert Astrapak Solder Wave Very Good Condition for its Vintage.
Recently decommissioned and received at our shop in Edina. MN 55439 is a 1995 Electrovert Astrapak Wave Soldering Machine. FOB: Edina Minnesota, estimated weight and dimensions below, price doesn't include a skid for U.S. Shipment nor International equipment preparation, rigging and crating. Subject to prior sales. Sold as is. Buyer pays all and any related shipping charges. Machine can be powered up and tested at our facility in Edina, MN. Originally configured with a spray fluxer, it currently has a foam fluxer with one stone. Left to Right Board flow, standard V Rib Transport Fingers, manual in-feed slides as pictured. IR Preheat. Main Lambda Nozzle assembly complete as pictured. Manual Conveyor Width Adjust. Solder Pot In/ Out. Conveyor Incline Switch. Finger cleaner brush box and covers are present but pumps and related parts are ... morenot. Contact us for questions or additional options(i.e. reconditioning prior to shipment, installation and start up, palletizing, adding a Chip Wave, Melonite Coating for Lead Free Soldering) 220VAC 3phase power, 65A Clean, dry compressed air needed for foam fluxer and conveyor incline. Solder available as well. Thank you! 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14b7e8c32a5-0x105-
Electrovert Ultrapak 600M/F Pb Free Solder Wave
Recently decommissioned. Electrovert Ultrapak 600M running Pb Free Cobalt solder. L to R board flow, V and L finger mix, Foam Fluxer, 3 pre-heaters, Lambda Wave, N2 Capable. FOB: Minnesota
APS GW-10HT Gold Wave Lead Free Rework Solder Fountain GW-10 High Temp Soldering
APS GW-10HT Gold Wave Lead Free Rework Solder Fountain GW-10 High Temp Soldering APS GW-10HT Gold Wave Lead Free Rework Solder Fountain GW-10 High Temp Soldering Serial# APS-GW-10HT081087 Very good condition- Looks like new High temperature. Lead-free soldering fountain used for removal and replacement of through-hole components. Connectors, etc. mounted on PC boards. Microprocessor based digital controller that regulates solder temperature. Wave height. And solder flow duration 10 Menu storage Height adjustable stainless steel platform Easy to change bayonet mount nozzles for a variety of rework selective soldering applications(only inclues nozzle shown) High temperature(350*C) Compatible with lead-free operation. Max. solder temp: 662*F(350*C) Weighs 30 lbs. empty Holds up to 40 lbs. of lead free solder(not included) Overall dimensions: ... more16" x 26" x 17" 406mm x 660mm x 432mm) Board Size: 8.5" to 18" 203mm to 457mm) Length x 16" 406mm) Depth Only includes what is shown Pay with your credit card through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS. FedEx, DHL, or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. PFI of Florida: 607 Savage ct longwood. FL 32750 Telephone: 4078224499. All items