|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$2000.00 Shipping Condition: Used Location: Aberdeen, United States Diehl 75 Straight Line Rip (SLR) Saw--The saw's chains are in great shape. The left and right chains are worn evenly. The landing on the teeth on the ... moreface of the chains is about 0.06". A new chains and track set would run you $12,000 or more if you bought a saw that had badly worn teeth on the chain.--Comes with strong, green alignment laser. It is clearly visible in full daylight.--All 4 speeds work well on the chain drive.--Just bought a new 18" blade a month ago for ripping a bunch of oak and hickory. It cuts through them like butter.--Comes with the older 14" blade that was on there previously. It cuts ok, but is not razor sharp like the new 18" blade.
Buy It Now
Condition: New Location: Beaver Falls, United States This ACCURA 03212 straight line rip saw is a beast of a machine! Multiple anti-kickback devices ensure safe feeding of timber. Side and rear guards ensure ... moreoperator safety. Has a large handwheel for adjusting rise and fall of cutting blade.
9d 0h 52m 57s 0 bids
$12610.00 Now
$1500.00 Shipping Condition: Used Location: Oxford, United States Mattison 404 Straight Line Rip Saw Model# MasterRip Totally Reconditioned MATTISON 404 STRAIGHT LINE RIP SAW 20 HP 3.430 RPM direct drive arbor motor ... more14" diameter saw blade capacity 4" maximum thickness. 24" throat depth overhead cutting design with single cast chain links automatic chain oil lubrication(1) row of top anti-kickback fingers 2 HP feed motor with(4) speeds of 62. 93, 124 and 186 FPM; top roller holddown 72" x 60" table Glue joint saw Voltage: 460/60/3 phase HTTP:WWW.REARDONMACHINERY.COM OR CALL: 239-947-0348 OR 239-250-1528 Posted with
Buy It Now
Free Shipping Condition: Used Location: Bennet, United States Diehl 72 straight line rip saw 13" long handle 3/4" bored holes. 55-59 casting number. 2-3/4” center to center holes. 1-1/4” thickness at holes.
Buy It Now
Condition: Used Location: Toledo, United States This is super clean diehl sl52 straight line rip saw. The chain is very sharp and practically new. This saw has low use and has been meticulously maintained. ... moreThese saws are hard to find and won't last long at this price. Get it while you can! Buyer to set up shipping. We will load it on a flatbedat no additional charge.
Buy It Now
Condition: New Location: Blaine, United States The 303S automatically feeds the material for consistent rip results. The cast iron feed chain runs on double V guide rails and holds the material firmly ... morefor precision straight cutting. A powerful 10 HP motor with maximum 12” blade provides a cutting depth up to 3.35”.
Buy It Now
Condition: Used Location: Pico Rivera, United States This is a Straightline Single Bottom Rip Saw in working condition. Precision built saw head ensures accuracy for straight line rip saw operations. Four ... morepressure rollers for precise cutting of large and small workpieces.
Buy It Now
Free Shipping Condition: Used Location: Bennet, United States 2006 yr 230/460/575V 3 PH 110/220V 1 PH. See pictures for details. Rip saw ran a 15 HP and a 2 HP motor.
Buy It Now
Condition: Used Location: Toledo, United States Mattison Straight line Rip Saw This unit was in service until the local shop closed. Delivery available to certain locations please ask. ~~ Model 202 ... more~~ 15 HP 3 phase~~ 1 1/2" diameter arbor. 4" maximum depth of cut, overhead arbor design 12" minimum stock length. 24" maximum rip cap to the right of the blade 77" x 65" table size Please read auction terms: This equipment is surplus and has not been tested. It's being sold as is. Items not paid for within 4 business days will be relisted* Please inquire about our PayPal policy BEFORE paying using these methods* Our preferred payment method is wire transfer or company check PLEASE allow a week for corporate processing of payment AND 4 to 5 days processing after payment is received Invoices will be provided Subject to prior sale Shipping prep and charges are responsibility of the purchaser All freight shipments require a complete address. A contact name, a contact phone number and a contact email. Freight shipments also require your indication of'Business with a dock' Business without a dock' and whether there is a forklift/ pallet jack available or if you require'Residential' delivery. Freight quote is based on the information that you supply to us. Michigan residents add 6% sales tax without a resale certificate As is. Where is FOB Midland. MI Mid-Michigan Industrial Surplus. LLC For existing feedback on EBay see our established electrical company Potential Electrical Supply. Both companies are located on the North side of Midland Michigan at 3045 and 3063 E. Mercantile Drive easy access on and off of US-10 Eastman road exit. Mid-Michigan Industrial Surplus. LLC statement regarding the equipment we sell: Information regarding the history and condition of the equipment we offer has been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by Mid-Michigan Industrial Surplus, LLC to determine its fitness for a purpose. The Property is s
Buy It Now
Condition: New Location: Blaine, United States We are an authorized dealer of Cantek and are always happy to provide assistance in picking the best machine for you. Precision straight line feeding ... morefor parallel and accurate rip cuts. Soft start – Star Delta starter reduces the amp draw on startup.
Buy It Now
Condition: New Location: Blaine, United States We are an authorized dealer of Cantek and are always happy to provide assistance in picking the best machine for you. Precision straight line feeding ... morefor parallel and accurate rip cuts. Absolute straight line feeding with glue joint to 13 ft.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States H5749 Laser Guide & Stand For G0524 Rip Saw. Optional laser guide with arm for G0524 Straight Line Rip Saw.
Buy It Now
Condition: New Location: Blaine, United States We are an authorized dealer of Cantek and are always happy to provide assistance in picking the best machine for you. Precision straight line feeding ... morefor parallel and accurate rip cuts. Powerful 20HP saw motor for even the most demanding rip applications.
Buy It Now
Free Shipping Condition: New Location: Grand Forks, United States It has a powerful 15 hp motor with a 2 hp motor in the feed assembly that can pull up to 120 feet of board through per minute. This Powermatic rip saw ... morehas a full cast iron body to make it stable and strong.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Powermatic SLR 12 Stralight Line Rip Saw, 15HP 3PH 230/460V. Large 18" rip and 3-7/8" depth of cut capacities for virtually any job. Full cast iron construction ... morefor rock-solid operation. Motor Phase 3.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States G0524 15 HP 3-Phase Straight-Line Rip Saw. The G0524 is supplied with 4 auxiliary rollers that can be attached when rip cutting workpieces shorter than ... more8". These auxiliary rollers can be left on the machine when cutting longer boards; however, the maximum thickness cutting capacity of the saw is reduced to 2-1/4".
Buy It Now
Condition: Used Location: Fresno, United States industrial straight line rip saw. Works as it should. Will deliver within a reasonable distance from coshocton ohio. #sawmill #woodworking #saw #heavy ... moreequipment
Buy It Now
$31.36 Shipping Condition: New Location: LEICESTER, United Kingdom WADKIN BURSGREEN INDUSTRY QUALITY MULTI RIP SAW BLADES Diameter 30.00 No of Teeth 18.0 PLUS 2 WIPER BLADES 4.0mm Kerf x 2.8mm Plate Bore size 70.00 + ... more4 KEYWAYS INDUSTRIAL QUALITY RIPPING SAWBLADES FOR STRAIGHT LINE EDGERS MOULDER SPLITTING MULTI RIP SAW MACHINES GENUINE SPARES FROM Advanced Machinery Services Ltd Spares Desk Manned By Ex Wadkin Leicester Staff Original WADKIN OEM Parts Full VAT Invoice Supplied. Also Contact us for all your Wadkin Models ADVANCED MACHINERY SERVICES LTD SKEFFINGTON MILL UPPINGHAM ROAD SKEFFINGTON LEICESTER LE7 9YE.
Buy It Now
Condition: Used Location: Hughesville, United States Model 202 Straight Line Rip Saw 15HP. 220/440V 3 phae Questions call 319-232-8184 Buyer is responsible for all freight and loading charges. Buyer is responsible ... morefor arranging freight.
Buy It Now
$30.79 Shipping Condition: New Location: LEICESTER, United Kingdom HEAVY DUTY INDUSTRIAL QUALITY SAWBLADE 430MM DIA z34 (no of teeth) 2' BORE 4.2 mm Kerf / 3.2 mm Plate Specially Manufactured For The Wadkin PU Straight ... moreLine Edger GENUINE SPARES FROM Advanced Machinery Services Ltd Spares Desk Manned By Ex Wadkin Leicester Staff Original WADKIN OEM Parts Full VAT Invoice Supplied. Also Contact us for all your Wadkin Models .ADVANCED MACHINERY SERVICES LTD SKEFFINGTON MILL UPPINGHAM ROAD SKEFFINGTON LEICESTER LE7 9YE.
Buy It Now
Free Shipping Condition: New – Open box Location: Goddard, United States Powermatic Model SLR12 Straig ht Line Rip Saw Operating Instruction and Parts List Manual For models: SLR12 Includes sections on: Operation, Parts List, ... moreAssembly breakdown, Troubleshooting, Electrical diagram, Adjustments Number of pages: Approx 31 Condition of original: Very Good Publication No.M-0460276 Publication/Revision Date: 12/05 Notes: Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. See my for more manuals 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e4d5de226-0xf1-
Buy It Now
$44.57 Shipping Condition: New Location: LEICESTER, United Kingdom Saw Blade For Wadkin PU Edger 430 x 34t - GENUINE WADKIN BURGSREEN BLADE HEAVY DUTY INDUSTRIAL QUALITY SAWBLADE 430MM DIA z34 (no of teeth) 2' BORE 4.2 ... moremm Kerf / 3.2 mm Plate Specially Manufactured For The Wadkin PU Straight Line Edger GENUINE SPARES FROM Advanced Machinery Services Ltd Spares Desk Manned By Ex Wadkin Leicester Staff Original WADKIN OEM Parts Full VAT Invoice Supplied. Also Contact us for all your Wadkin Models . ADVANCED MACHINERY SERVICES LTD SKEFFINGTON MILL UPPINGHAM ROAD SKEFFINGTON LEICESTER LE7 9YE Technicala Saw Blade Dia 430 Saw blade bore 2.
Buy It Now
$27.25 Shipping Condition: Used Location: Elysburg, United States
Buy It Now
$27.25 Shipping Condition: Used Location: Elysburg, United States
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$42.47 Shipping Condition: New Location: United Kingdom
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom door and window casing.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
Free Shipping Condition: New Location: Cranbury, United States 【Excellent Quality and Durability】: The Stainless Steel Universal Bevel 180 Degree Angle Combination Square Protractor Ruler made of high quality stainless ... moresteel, anti-rust, durable and sturdy to use.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Split Molding Knife, runs two pieces from ... moreone board. Most of the knives have only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom door and window casing.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board multi-width. Most of the knives have only been ... moresharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom door and window casing.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom door and window casing.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom door and window casing.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom door and window casing.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom door and window casing.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, ... moreBackouts, Siding, Wall Cladding and more. All in good shape and ready to be put to work.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
|
|
|
|
Diehl SL-52 Straight Line Rip Saw, 16" Blade Cap, 4" Depth Cap. 15HP, 220V, 3Ph
As Taken From Service, 15HP. 220V, 3Ph, 3.450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade cap. 4" max. depth of cut. 10" min. part length, 25" width of table to the right of blade and 36" to the left, 64" x 78" tabletop size. Stock Number: O-2-038 Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business ... moredays are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.
|
|
|
Takekawa Straight Line Rip Saw
Takekawa rip saw. This has been in a custom stair building shop for many many years. I took over the shop and dont do the type of woodwork that would require this machine(cabinet shop) Owner is retiring. I am selling his equipment for him as he is internet resistant. Machine is in good working order but has 2 issues: 1. there is a small leak in one of the hoses at front of saw(oil line) and requires filling oil before use(thus the oil spills on front bottom of saw) 2. When saw comes to a stop there is a squeek(we believe it is a bearing that needs replacing) This saw has 2 motors and is 3 phase.
|
|
|
TAKEKAWA 10" MODEL RB 25 A STRAIGHT LINE RIP SAW IN NICE CONDITION
Capacity 10" max. diameter of blade. 1" spindle diameter. Max. workable thickness 2 1/2" Min. workable length 8" 34" table height. 15 3/4" throat. 5.000 RPM spindle rotation. 33-80 f/min. feed speed. 7.5 HP motor for saw spindle. 1 HP motor for feeding. Anti kick-back steel fingers. Ruler guide for accurate ripping,
|
|
|
TAKEKAWA "RB-25" STRAIGHT LINE RIP-SAW MODEL RB 25A (OC31)
Up for Sale! TAKEKAWA"RB-25" STRAIGHT LINE RIP-SAW MODEL RB 25A(OC31) Brand/Model: TAKEKAWA"RB-25" Machine Type: STRAIGHT LINE RIP-SAW. 10 HP Saw arbor assembly mounted overhead. Belt drives blade at 1740 RPM. 1" dia. arbor. 12" max. blade. cap. 2-1/2" max. stock thickness. 13" min. stock length. 24" throat depth. Equipped with: 7-1/2" Wide rubber pad feed chain. 3-step variable feed from 10- 30- 72 FPM. 2 HP feed motor. 2) infeed and(2) outfeed upper spring loaded holddown rolls. table size 73" x 56" Automatic chain lubrication. Magnetic controls. anti-kickback fingers and overhead laser light. Saw can be previewed at our facility in Huntington Beach. Ca We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. ... moreFedex or USPS. CALL. TEXT OR EMAIL WITH QUESTIONS. 714)658-5390 FREE LOADING IN ALL PURCHASES SE HABLA ESPAÑOL Visit our eBay store www.orangecountymachinery.com/ ph 714 658 5390
|
|
|
Diehl model 75 straight line rip saw slr 20 hp 3 phase, SLR, laser, vsd
Saw is in ready to use condition. Call as needed; Rob 270-350-8234. Was producing glue line quality edges the day it was taken out of use. Needs nothing, laser and feed all new or replaced. Dust in picture is from being covered in my garage/shop unused for 3 years, saw is ready to go. Can tow to your shop if within 500 miles for expenses when paid for. Weighs over 5,000 pounds, need a 6K or larger lift to unload. I accept business checks, money orders, credit cards through my wives business, not set up for paypal. Call with questions or needs, mechanics of saw are rebuilt and in great shape ready to put into use in your facility.
|
|
|
15hp Takekawa Straight Line woodworking Rip Saw RG30s
Takekawa Straightline Ripsaw. Model rg30s, 15hp main motor drives 12 inch blade at 5,000 rpm, 2hp feeder up to 131 foot/min, 2.75in max stock thickness, 26 inch throat, Nice clean and compact woodworking Rip Saw 76x61x51. Approx weight 3,100 lbs see more Takekawa rip saw saw pictures here freight should be about $200-$425 to a business in USA. Banded oversize pallet cost $75, will load for free) approx wt. 3100 lbs, SHIPPPED F.O.B. from 60115 we enjoy visitors by appointment in our woodwork workshop shop 60115. Please phone first(815)758- 6534. See more pictures here(or call for a video) You get our 40 years of experience as woodworkers and manufacturers PLUS 20 years as machinery rebuilders and dealers. To help you choose the right woodworking equipment for your shop. Pleasant St Woodworking Machinery has been serving skilled craftsmen. ... moreWorld-class manufacturers, and serious hobbyists since 1989. We stand behind the used equipment we sell, guarantee our rebuilt woodworking machinery, and want you to be satisfied with your machine. Please Call(815)758-6534. Thanks for looking at Pleasant Street Machinery! For the past 20 years we have specialized in rebuilding American machines that are ready to work and do what you want them to do. Our inventory is constantly changing and we get most machines from our clients.send us an email OR CALL(815) 758- 6534. Thank You! Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Fees A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. There is a $5.00 handling fee on all items. A $75/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the
|
|
|
Diehl SL52 Straight line rip saw
This is super clean diehl sl52 straight line rip saw. The chain is very sharp and practically new. This saw has low use and has been meticulously maintained. These saws are hard to find and won't last long at this price. Get it while you can! Buyer to set up shipping. We will load it on a flatbedat no additional charge.
|
|
|
Diehl SL-55 Straight Line Rip Saw, 16" Blade, Laser, Cleaned, Checked, 15HP, 3Ph
Diehl SL-55 Rip Saw. Cleaned and Checked Mfg. year: 1987 15HP/ Wired for 480V/ 3ph. Dual Voltage 230/460V motor 2" Diameter arbor 16" Maximum blade capacity 2-1/2" Maximum depth of cut with 16” diameter blade. 1-1/2” maximum depth of cut with 14” diameter blade; minimum 1/8” depth of cut Twin chain drive– cuts from bottom Top pressure system with(6) spring loaded pressure rolls Table size- 56” long x 45” wide- width of table to the right of blade is 19” blade& 26-5/16" to the left. Table height is 34” Floor space required– 67” wide x 65” long Stock Number: O-2-040 Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder ... morepays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not incl
|
|
|
IMC Model RP-12 10 HP Straight Line Rip Saw
IMC Model RP-12 10 HP Straight Line Rip Saw General Info: Stock# GS-131084 Condition: Used. Good Tested: Yes. Good Working Condition Brand: IMC Model: RP-12 Serial: 5957-6 Shipping Weight: 2500lbs. Shipping Dimensions: 68" L x 60" W x 68" H Location: Stone Mountain. GA Specifications: 2-3/8" Maximum Thickness. Throat Distance 18.125" Blade Diameter 8" 12" Arbor Diameter 1" Feed Speed 75-150 FPM, Motor 10HP, Feed motor 2HP, 220/440V(Wired 220) 3Ph, 57-1/4" x 39.375" Working Table Space. Additional Information: Machine has been tested and is in good working condition. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Drive Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific ... morequestions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
Used Mereen Johnson 431-DC Woodworking/Wood Straight Line Multiple Gang Rip Saw
Used Mereen Johnson 431-DC Woodworking/Wood Straight Line Multiple Gang Rip Saw THIS UNIT IS IN WORKING CONDITION AND WILL CLEAN-UP NICELY. 75 HP MOTOR. TO OPEN A LINK TO THE MANUFACTURER'S WEBSITE FOR TECHNICAL INFO. PLEASE EMAIL WITH GENERAL QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# MJ-7264 OVERALL DIMENSIONS: 77" L x 90" W x 69" H SHIPPING WEIGHT: 12.000 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING ... moreCHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY
|
|
|
Marion Straight Line Rip Saw
Marion Straight Line Rip Saw Model M. Serial# 255221. 20HP 220/440V 3 Phase motor.
|
|
|
Mattison 202 Straight Line Rip Saw
Model 202 Straight Line Rip Saw 15HP. 220/440V 3 phae Questions call 319-232-8184 Buyer is responsible for all freight and loading charges. Buyer is responsible for arranging freight.
|
|
|
Diehl Model ESL-20 15HP Straight Line, Glue Joint Rip Saw
Diehl Model ESL-20 Straight Line. Glue Joint Rip Saw General Info: Stock# MB-141010-11 Condition: Used. Excellent Tested: Yes. Good Working Condition Brand: Diehl Model: ESL-20 Serial: 96M-6198-5614 Year: 1996 Weight: N/A Shipping Dimensions: N/A Location: Stone Mountain. GA Specifications: Diehl Model ESL-20 Straight Line. Glue Joint Ripsaw. 15HP Belt Drive Arbor Motor, 208/220/440V, 3-Phase, Separate Feed drive motor, 2-1/2" Maximum Thickness Capacity, Upper& lower kicback Assembly, Floating Guide fence, 2" Diameter Arbor with 1/2" Pin Hole on 2-1/2" CC, 1) 14" 1) 16" Diameter Carbide tipped rip blade, Laser Line Assembly. Additional Info: The Diehl Ripsaw has been tested and is in good working condition. Unit comes with extra new blade. New Laser Line Assembly& Manual. This machine can be shown under ... morepower for demonstation. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
|
|
|
Grizzly G0524 Straight Line Rip Saw with Laser Guide - Sacrifice/Must Sell FAST
Grizzly Industrial G0524 Straight Line Rip Saw with Laser Guide w/Stand and electrical conversion kit. The laser was an additional $795 option and the electrical conversion package was another $250 option purchased when we got the saw. Plus you won't pay sales tax on it. If you can pick it up. You can save shipping charges as well. All things we paid when the saw was purchased. Purchased in Dec 2012 or Jan 2013. Hardly used. Excellent condition. MUST SELL QUICKLY. Need to move it and I do not want to put it into storage. I have until June 12 to get it out of the space it is in now. Please make an offer so I don't have to move it. It is an excellent and high quality saw. It is with great sadness that we have to sacrifice this saw. Circumstances dictate we must. Either pick up or send an LTL carrier.
|
|
|
Diehl ESL 10 Straight Line Rip Saw
This saw was manufactured in the U.S. by Diehl Machines. Considered to produce the finest straight line saws in the world. The ESL10 was designed for smaller shops, but retains the design specifications and chain of the larger Diehl machines. This particular machine(serial#02-6771-6177) was manufactured in 2002 and has seen very little use. The saw works like new and the feed chain is in mint condition. Included are 3 blades, a new 11.5" and 10" and the original 10" which is still in great condition, owners manual and mobile base. With an 11.5" your capacity is 2 3/8" For everything below 1 1/2" the 10" works perfectly. 7.5hp 220v 3phase main motor, 30fpm feed speed. Saw has more power than needed and will produce perfect glue line rips every time. I built the removable mobile base which allows you to easily ... moremove it around the shop. This is extremely convenient and rare considering it's a real straight line rip saw. This is the only rip saw I'm aware of that you can do this. In 2002 this machine sold for around $11,000.00. Please don't hesitate to contact me with any questions. Brian 619-977-9507. Will pallet and prepare for shipment for $150.00.
|
|
|
Ekstrom Carlson Straight line rip saw
Ekstrom Carlson SLR saw is in excellent condition. This saw is clean and exceptional shape. Very little wear, came out of a small 2-3 man shop that shut down several years ago and has been sitting. This saw does not appear to have seen very much use, it was NOT a high production shop. Comes equiped with Laser, spare 16" blade, there is 26" of throat, the chain is crisp and sharp. Please contact me with any questions.
|
|
|
Shop Fox straight line rip saw
Features: Variable speed conveyor Dual-bearing driveline for conveyor table Exclusive 6" wide chain feeding conveyor table for smooth operation Dual-spindle lock prevents spindle drop while running Auto-lube system is adjustable for precise lube intervals Extra long infeed table and rip fence for handling large workpieces, Specifications: Main motor: 15 HP. 220V/440V* 3-phase Feed motor: 2 HP. 220V/440V* 3-phase Table size: 53" x 37" Floor to table height: 32-1/4" Maximum cutting thickness: 3-7/8" Minimum cutting length: 8" with included hold-down roller kit) Feed speed(variable) 30?112 FPM Saw blade diameter: 10"12" Maximum cutting width: 18" Arbor diameter: 1" Spindle speed: 4500 RPM Dust port diameter: 1) 4" Overall dimensions: 61-1/4" long x 43-1/2" wide x 80-1/2" high ... moreApproximate shipping weight: 2243 lbs.
|
|
 |