|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$189.95 Shipping Condition: Used Location: Wolcottville, United States Tested and works as it should. About 17" of travel .
Buy It Now
Condition: Used Location: Middlebury, United States Country of Manufacture: United States. Prefer to pick it up yourself?. Will there be a dock or forklift. To get a freight quote we will need to know the ... morefollowing We choose the carrier. Need it urgently?.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I believe the below link is the manual for this machine. There is a couple of options.
Buy It Now
$5.95 Shipping Condition: Used Location: La Grange Park, United States knob and rod off 33-890 radial arm saw
Buy It Now
$21.00 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I did have to cut the cord to get it out but there is plenty left to wire it again. Motor is smooth.
Buy It Now
$17.80 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ).
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest).
Buy It Now
Condition: Used Location: Middlebury, United States Prefer to pick it up yourself?. BULLSEYE INDUSTRIAL SALES, LLC. Will there be a dock or forklift. Unless otherwise specifically agreed to in writing by. ... moreSold for parts or repair. To get a freight quote we will need to know the following.
Buy It Now
$21.80 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I believe the below link is the manual for this machine.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Delta no. 43-990. This is an arbor used on the radial arm saws to mount 1/2" bore shaper cutters.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest).
Buy It Now
$13.16 Shipping Condition: Used Location: Canada This sale is for ONE GROUP of FOUR(in total) previously owned COPIES of: Rockwell Manufacturing Company. ROCKWELL RADIAL SAW CATALOG R62. Pittsburgh 1962) ... more5 page fold out. This catalog offers a description on the features of the 10" Portable and the Super 990 models. Rockwell Manufacturing Company. DELTA-ROCKWELL THE NEW SUPER 990" Pittsburgh 19? 1 page flyer with three creases from folds. This flyer mentioned the features of the super 990 radial saw. Two copies of: Rockwell Manufacturing Company. NEW ROCKWELL-DELTA 10" PORTABLE RADIAL SAW" Pittsburgh 1964) 5 page advertisement with an old dealer's stamp on the back. This flyer provides specifics, images and features of the radial saw. These are in Excellent overall condition and would make nice gift for any Rockwell. Delta, Delta Rockwell or Rockwell Delta collector. This PUBLICATION is being offered at any exceptional price. A rule may appear in the photographs for scale reference only and is not part of this sale. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinist tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their go-vernment when items cross the border. These are the sole responsabi. Lity of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents, so please don't ask. We now accept PAYP AL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability. Proper and safe use
Buy It Now
$3.97 Shipping Condition: Seller refurbished Location: Addison, United States Maintenance Manual (Model 33-890, 33-895X).
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Delta no. 1086893 for radial arm saws. This fits the following saws: 33-286, 33-310, 33-336, 33-337, 33-390. Only seven available.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest).
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States There is a couple of options. I believe the below link is the manual for this machine. ( depends on your device ).
Buy It Now
Condition: Used Location: Pico Rivera, United States This is a Heavy Duty Radial Arm Saw in working condition. Made in the U.S.A. by Delta Machinery. Out Rip: 28". Saw Head Tilt: 90 degrees L/R. Blade Size: ... more14" maximum. Arm Swivel: 90 degrees L/R. Surface Area: 39" x 40".
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest).
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest).
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. (Preferred & cheapest). There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ).
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ).
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ).
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. (Preferred & cheapest). There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I believe the below link is the manual for this machine.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I believe the below link is the manual for this machine. There is a couple of options.
Buy It Now
$8.70 Shipping Condition: Used Location: North Tonawanda, United States There is a couple of options. I believe the below link is the manual for this machine. (Preferred & cheapest).
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States There is a couple of options. I believe the below link is the manual for this machine. (Preferred & cheapest).
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I believe the below link is the manual for this machine. There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ).
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. (Preferred & cheapest). There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. (Preferred & cheapest). ( depends on your device ).
Buy It Now
$80.73 Shipping Condition: Used Location: Escondido, United States Includes the two black table levelers and leveling screws as shown.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ).
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. (Preferred & cheapest). There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. (Preferred & cheapest). There is a couple of options.
Buy It Now
$15.45 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$5.00 Shipping Condition: Used Location: Kimberly, United States
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I believe the below link is the manual for this machine. There is a couple of options.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ).
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$21.80 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
Free Shipping Condition: Used Location: Waterford, United States , DRILL 0-1/2" CHUCK. THE JAWS OPEN AND CLOSE FINE. THE CHUCK KEY HAS BEEN CUT DOWN. LOOK AT THE PICTURES.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States There is a couple of options. ( depends on your device ).
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States There is a couple of options. I believe the below link is the manual for this machine. ( depends on your device ).
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States (Preferred & cheapest). ( depends on your device ). There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I believe the below link is the manual for this machine.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
Buy It Now
$8.70 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I believe the below link is the manual for this machine.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I believe the below link is the manual for this machine.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). (Preferred & cheapest). I believe the below link is the manual for this machine.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States There is a couple of options. I believe the below link is the manual for this machine. ( depends on your device ).
|
|
|
|
Delta 16" Single Phase 3 HP Radial Arm Saw Model 33-410 w/ Accessories
Radial Arm Saw You are bidding on one one Delta 16" Radial Arm Saw. Model 33-410. Item is used, but in great condition. There are some cosmetic scratches and scrapes to the unit, but these will not affect the unit's function. This unit is from a labratory environment and saw limited use. Comes with everything pictured. For more pictures of the accessories see: Motor Specifications: Delta No. 438-02-314-2032 8H1498FL5501AAP HP: 3 RPM: 3450 Volts: 230 Amps: 13.0 Hz: 60 Ph: 1 Encl. TEFC Service Factor: 1.0 Frame: 149Z-87 Insul Class: B3 Max Ambient: 40 Deg C Type: BFL Design Rating: L KVA Code Letter: H Cont. Saw Duty Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. When requesting a shipping quote. Please include your zipcode and whether the unit will be delivered to a residence ... moreor a business with a truck high dock or forklift. Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves($75 packaging fee added to total) or we can provide a competitive quote to the buyer. Shipping weight 680 lbs. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do everything we can to assist in finding the best freight price we can. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and business's. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Delta Radial Arm Saw 5HP 230/460v 35-411 400-06-137-0002
Delta Radial Arm Saw 5HP 230/460v 35-411 400-06-137-0002 Part No. 400-06-137-0002 Cat No. 35-411 Serial No. 93J26923 41" Table Length 34-1/2" Table Height Delta Electric Motor 438-02-314-2034 5 HP. 3450 RPM 230/460 Volt. 3 Phase 60 HZ. 13/6.5 Amps Estimated Weight: 850 lbs. 0213.1 AB) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: ... morePlease provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Mo
|
|
|
Radial arm saw Delta , 5hp , 16" , 3phase
one) Radial arm saw. Delta, model 33-073, s/n 89C12416, 5 hp, 200/208/400 vac, 3 phase, 3450 rpm. 16" blade, 24" travel. Head bevels and rotates. Arm rotates. 28" x 42" table. Very clean. 100 tooth carbide blade. $295 shipping in the continental U.S. You can send text messages to my cellphone at 9374165497@vtext.com D-7601, 02, 03, 04, 05 If you have any questions. Please email me! Happy bidding! Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $295.00 tru International Shipping. $2500.00 sea FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
ROCKWELL DELTA 16" RADIAL ARM SAW WITH HUGE CUT TABLE 3 PHASE 16-RAS
USED EXCELLENT CONDITION ROCKWELL DELTA 16" RADIAL ARM SAW MODEL 16-RAS. WORKS GREAT. INCLUDES VERY HEAVY DUTY INFEED AND OUTFEED TABLES. BUYER PAYS FREIGHT SHIPPING ON 750LBS FOR THE SAY ALONE FROM 30527, SEPARATE SHIPMENT OF 450LBS PLUS FOR THE TABLES OR FREE LOCAL PICKUP IN NORTH GEORGIA. 012-06-04-320/650 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT ... moreTO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted
|
|
|
Delta Radial Arm Saw 33-401 This Is A 6000$ Saw!!
Delta 33-401 saw for sale great saw! Buyer arranges and pays shipping. I will load free on whatever truck is arranged Here is the prod spec sheet from website: View all DELTA Machinery products Product Description Delta 33-401 14" Radial Arm Saw 5HP. 230 Volt, After nearly 90 years of expertise in the woodworking business. DELTA Machinery has become one of the most revered brands in woodworking tools today. DELTA Machinery focuses on innovations to help the woodworker create masterpieces easier and with more precision. Delta 33-401 14" Radial Arm Saw 5HP. 230 Volt, Features: Exclusive. Turret Arm" construction permits the sawblade to rotate a full 360° above the work table. Gives full table capacity for cutting both right and left hand miters. Unique. Micro-Set" miter stops assure perfect right& left miter cuts ... morefor the life of the saw. Lifetime. Track rods feature glass-smooth hardened surfaces to minimize roller friction. Up-front operating controls are conveniently located for safe. Easy operation. Six positive. Convenient table leveling jacks help sustain saw table-to-track arm parallelism for excellent cutting accuracy. Table measures a full 44" X 36-1/2" Convenient fence lock knobs allows user to adjust and lock-in the desired fence position at front of the machine. Cutterhead return automatically pulls the cutterhead behind the fence so material can be quickly repositioned for the next cut. Extra-long turret arm provides maximum outboard rip and crosscut. Delta 33-401 14" Radial Arm Saw 5HP. 230 Volt, Specifications: Motor: 5 HP. 3 Phase, 230/460V(wired 230V) 60 hz, 3450 RPM, TEFC(totally enclosed, fan cooled) motor• Motor Control: 24V Push-Button Station. Magnetic Starter, Transformer and Overload Protection(LVC) Blade Diameter: 14• Arbor Size: 1" 25 mm) Crosscut Capacity(1" depth of cut) 29" 737 mm) Miter at 45° R& L(1" depth of cut) 22" 559 mm) Depth Of Cut At 90 Degrees: 4" 102 mm) without leaf guard: 4-1/16" 117 mm)
|
|
|
DELTA 10" Professional Radial Arm Saw
DELTA 10" Professional Radial Arm Saw includes Stand. 1-1/2HP, 120/240V Motor, automatic blade brake, 10" Saw Blade, Cast-iron track. Column and column support for rigidity and continued accuracy. Depth-of-cut control handle and locking levers are positioned above the table for easy access Steel stand for sturdy support Extra-large table provides support for wide panels or large work pieces Provides greater cutting capacity for crosscutting nominal 2" thick stock up to 16" wide Miter cutting capacities in nominal 2" thick stock are 10-1/2" at 45° left and 11" at 45° right
|
|
|
Radial arm saw Delta Industrial 7 1/2 hp 16" 3phase
Radial arm saw Delta Industrial 7 1/2 hp 16" 3phase Condition: THIS Delta Saw IS USED BUT WAS REMOVED FROM A WORKING SYSTEM. IT SHOULD BE IN WORKING ORDER. ALTHOUGH WE COULD NOT TEST IT AT OUR FACILITY TO BE CERTAIN. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS, EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you.
|
|
|
Rockwell/Delta 30C 10" Blade Radial Arm Saw
10" Radial Arm Saw from Rockwell/ Delta. Full size machine on sturdy stand. In working order. Does multiple jobs for woodworking. Rotates and does angle cuts Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DELTA RADIAL ARM SAW 33-892, 12"
DELTA RADIAL SAW 33-892- USED BLADE 12" 230 VOLTS AMPS 5.6 PH 3 RPM 3450 HZ 60
|
|
|
DELTA 33-421 18'' Radial Arm Saw 7-1/2 HP
DELTA 33-421 18' Radial Arm Saw 7-1/2 HP 3phase Condition: THIS Delta Saw IS USED BUT WAS REMOVED FROM A WORKING SYSTEM. IT SHOULD BE IN WORKING ORDER. ALTHOUGH WE COULD NOT TEST IT AT OUR FACILITY TO BE CERTAIN. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS, EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13e6c4e94f4-0xf0-
|
|
|
1985 Rockwell Delta Radial Arm Saw 33-082
You are looking at a rockwell delta radial arm saw 33-082. It was made in 1985 It's 12" and is 2 hp. I'm not too familiar with saws so please contact me before purchasing. If you have any questions contact John at 732-620-3051 Follow us on twitter- aatruckparts
|
|
|
Rockwell Delta 10" Radial Arm Saw Cat. No. 33-310
Rockwell Delta 10" Radial Arm Saw Cat. No. 33-310 Up for auction is a used Rockwell Delta 10" Radial Arm Saw Cat. No. 33-310. This item is in good condition with some minor cosmetic wear from normal use. There are some scuff marks and scratches on the item but this does not effect the functionality of the item. All the function knobs and handles are in good condition with no dents or cracks. The base is in good condition as well. Please refer to the photos below for more details on the item. This item was plugged in and powered on with no problems. We were able to slide the saw back and forth without any issues as well as rotating the arm at different angles. We were also able to raise and lower the saw without any issues as well. The motor ran without any issues or problems and we had no problems cutting through a pine 2"x4" ... moreThe only issue we came across was the key to lock the on/off switch wouldn't turn properly. We are unsure the reason for this. This item also includes a 10" Dewalt blade. Thank You. Good Luck, and Happy Bidding! This item will require freight shipping or local pick up at our facility in Christiansburg. VA 24073. The freight calculator below will show your shipping charges. We will add $30 for palatalizing the item. This includes strapping it to a skid and wrapping with stretch wrap as well as cardboard and bubble wrap if it needs it. Should you wish to schedule your own freight shipping. We will only charge the palatalizing fee. The freight calculator will ask for your Zip and a description of your delivery location. To save on shipping. Shipments can be picked up at a freight terminal for the same price as a business shipment with dock. If the shipment needs to be brought inside by the carrier(not including loading dock) give us a call for a quote. If you have any questions give us a call at 540-381-3011 or send us an e-mail through eBay. Please note: Schools& Churches are generally considered limited access or residential. Freight calculator Enter your zip
|
|
|
Delta Radial Arm Saw Industrial 16" 5HP 33-411 w. Blade
USED EXCELLENT CONDITION DELTA 16" RADIAL ARM SAW MODEL 33-410 WITH 16" CARBIDE BLADE. 3 PHASE POWER ONLY. NEWLY ADDED 3 LAYER PHENOLIC TABLE TOP. $5829 AT AMAZON. SEE MY OTHER LISTING FOR OTHER MODELS. BUYER PAYS FREIGHT SHIPPING ON 650LBS FROM 30527 OR FREE LOCAL PICKUP IN NORTH GEORGIA. 2008-40 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% ... moreRESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performa
|
|
|
Rockwell/Delta 30C 10" Blade Radial Arm Saw NO RESERVE
NO RESERVE 10" Radial Arm Saw from Rockwell/ Delta. Full size machine on sturdy stand. In working order. Does multiple jobs for woodworking. Rotates and does angle cuts 1 1/2 hp. Buyer is responsible for freight cost and setting up shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DELTA 33-421 18-Inch 7-1/2 Horsepower Radial Arm Saw, 230/460-Volt 3 phase
This is a used DELTA 33-421 18-Inch 7-1/2 Horsepower Radial Arm Saw. 230/460-Volt 3 phase in excellent working condition! Exclusive. Turret arm construction permits the saw blade to rotate a full 360 degree above the worktable. Gives full table capacity for cutting both right and left hand miters. Unique. Micro-Set miter stops assure perfect right and left miter cuts for the life of the saw Lifetime. Track rods feature glass-smooth hardened surfaces to minimize roller friction Up-front operating controls are conveniently located for safe. Easy operation Six positive. Convenient table-leveling jacks help sustain saw table-to-track arm parallelism for excellent cutting accuracy; Table measures a full 44-inchx28 inch Packing or crating will incur additional charges. Please send me a message for quotes if interested in this machine. This item ... morecan be picked up in Upland CA or shipped by freight company. Buyer responsible for shipping and handling cost. Send a message to get a shipping quote. Shipping weight 800 lbs Overall dimensions: 44" x 42" x 64" Comes as shown on the pictures Posted with
|
|
|
ROCKWELL DELTA 14" RADIAL ARM SAW 2 HP SINGLE PHASE 115/230V MADE IN USA
ROCKWELL DELTA 14" RADIAL ARM SAW 2 HP SINGLE PHASE 115/230V MADE IN USA DELTA 14" RADIAL ARM SAW 2 HP SINGLE PHASE 115/230V. THE SAW WORKS GREAT THE MOTOR IS STRONG AND THE SLIDE WORKS GOOD. IT HAS A HOMEMADE LOCKING HANDLE ON THE SLIDE AND IT NEEDS A NEW TABLE TOP. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE SAW. IT SHIPS FREIGHT SO PLEASE EMAIL ME YOUR ZIP CODE AND IF IT IS GOING TO A HOME OR BUSINESS AND IF YOU NEED A LIFTGATE TRUCK FOR UNLOADING.
|
|
|
Delta / Rockwell Model 14-RAS 14" Radial Arm Saw, 5HP, 480V, 3Ph
Delta/ Rockwell Model 14-RAS Radial Arm Saw General Info: Stock# 57422 Condition: Used. Fair Tested: Yes Brand: Rockwell/ Delta Model: 14-RAS Serial: GG 3807 Year: N/A Shipping Weight: 600 Lbs Shipping Dimensions: 48" L x 40" W x 68" H Specifications: Delta/ Rockwell Model 14-RAS Radial Arm Saw. Max. Stroke Cap. 23-1/4" wide x 4-5/8" deep, 5HP, 480V, 3Ph, 14" Diameter Blade Capacity, Starter, Cord& Plug. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084 If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
Delta 16" Radial Arm Table Saw 24" Rip w/Blade 33-072 - 5 HP/460V/3PH
SKU: 2474225 A: 0013000000CXCfg O: 0065000000O2pyx PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Delta 16" Radial Arm Table Saw 24" Rip w/Blade 33-072- 5 HP/460V/3PH. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Delta Model: 33-072 Type: Radial Arm Saw Serial No: 89C12413 Features/Specifications: ... moreBlade Capacity: 16" Max. Crosscut 24" approx. Arbor Size: 1" diameter Delta Motor: 5 HP- 230/460V- 12.8/6.4A 3450 RPM- 60 Hz- 3 PH Tilt head Table Size: 48" x 36" Easy-Off emergency stop panel Debris chute Dimensions& Weight: Dimensions: L 50" x W 48" x H 64" Shipping Weight: 590 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Some rust to blade and other metal components of saw(see photos) Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and
|
|
|
Delta 33-410 16" Radial Arm Saw Long Arm 3HP 1PH USA Made
Delta 33-410 16" Radial Arm Saw Long Arm ~30" crosscut Solid cast iron and made in USA Used but In Great Shape Only part missing is antikickback pals/guard part 3hp Single Phase Comes with LVC Comes with Slatwall Table Top for clamping Pickup Only in Bloomington IL or Arrange your own Freight Saws is on a Pallet/Base
|
|
|
Delta Radial Arm Saw 33-892 This Is A $4,575 Saw!!
Normal 0 false false false EN-US X-NONE X-NONE DELTA RADIAL ARM SAW Blade Diam 12 in Arbor Diam 5/8 in Speed 3450 rpm Cutting Cap. 3 3/4 in(90 crosscut) Max] 2 1/2 in(45 bevel) Max] 14 3/8 in(90 crosscut) Max] Rip Cap. 24 1/4 in Max: Cutting Angle 45 Bevel. 45 Miter Left, 45 Miter Right Power Cap. 2 hp[Max] Voltage 200.00 VAC. 230.00 VAC, 460.00 VAC Frequency 60.0 Hz Phase 3 Control Type On/Off Table/Plate Length 25 1/2 in Table/Plate Width 30 in Height 61 in Width 32 in Depth 35 in Handle Type Pistol Grip No. of Positions 4 Power Source Electric Type Radial Arm Saw Wt. 300 lb BUYER IS RESPONSIBLE FOR SHIPPING!
|
|
|
Delta 10" Blade Cap Radial Arm Saw, 1.5HP, Model RS830, 1PH, Great Cond
Delta 10" Radial Arm Saw Model RS830"Shopmaster" Wired for 110V Saw is in like new condition for the most part. Has more marks likely from handling and moving than use. Technical Details Cast-iron track. Column and column support for rigidity and continued accuracy. Depth-of-cut control handle and locking levers are positioned above the table for easy access Steel stand for sturdy support Extra-large table provides support for wide panels or large work pieces Provides greater cutting capacity for crosscutting nominal 2-inch thick stock up to 16-inch wide; Miter cutting capacities in nominal 2-inch thick stock are 10-1/2-inch at 45 degree left and 11-inch at 45 degree right DELTA RS830 10-Inch 1-1/2 Horsepower Radial Arm Saw. 115/230-Volt 1 Phase Machine can be loaded at no charge. Please Email or call 1-800-793-4494 if interested ... morein this machine. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping and freight costs associated with getting this machine to your location. Pick-up of this machine is available also. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to prior sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. TERMS: Immediate Payment with order. Full payment or deposit required within 24 hours of purchase. Items with no payment or deposit after the 1st seven days will be immediately reported to eBay as unpaid. Cash in person. M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. Powered by The free listing tool. Li
|
|
|
DELTA 33-411 RADIAL ARM SAW 16" 5 HP 3 PHASE
DELTA 33-411 RADIAL ARM SAW 16" 5 HP 3 PHASE DELTA 33-411 RADIAL ARM SAW 16" 5 HP 3 PHASE. THE SAW WORKS GREAT THE MOTOR IS STRONG AND VIBRATION FREE. THIS SAW HAD A OUTFEED TABLE ON IT AT ONE POINT AND THE LEFT SIDE OF THE TABLE HAS BEEN MODIFIED. SO IT WILL SOME WORK TO GET IT PUT BACK THE WAY IT WAS, OR JUST BUILD YOUR OWN OUT FEED TABLE FOR IT. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE SAW. IT WILL SHIP VIA FREIGHT SO PLEASE EMAIL ME YOUR ZIP CODE AND IF IT IS GOING TO A BUSINESS OR HOME AND IF YOU HAVE A DOCK OR FORKLIFT TO UNLOAD IT.
|
|
|
Delta Rockwell 14" Radial arm saw 33-082 5hp 3ph w/stand panel/cabinet/dado
Very clean Delta 33-082 radial arm saw just removed from service in a local library that's closing its cabinetry department. Hard to find 5hp motor- most of the 14" Deltas have the smaller 3hp motor. 3ph operation. 1" arbor, 25" capacity and will accomodate up to a 2" dado. Adjustments are tight and head moves smoothly. Shows no signs of modification or abuse. Includes switch. Junction box and blade wrenches as shown. Freight shipping available anywhere in the US. Approximate weight 750lbs. Rough estimate is around $180 to a business in the midwest or east coast. For example. No charge for crating but keep in mind we spend about 1 hour and about $30 in materials to package. Local pickup welcome and we have a forklift to load. Thanks for looking!
|
|
|
Delta cat # 33-090 10 inch Radial Arm saw
For sale is one Delta 10 inch radial arm saw.This saw has a ball bearing motor and runs like a champ.The cat# is 33-090 and the number on the motor is 438-02-314-7086. You can also make the blade do about anything from compound cuts to ripping.everything works and all parts are there.Plus the nice Delta metal stand.Local pickup only please.
|
|
|
Delta Radial Arm Saw Industrial 12" 3 Phase 2hp Electric Brake Dust Collection +
Great working used Delta Radial Arm Saw Industrial 12" 3 Phase 2hp Includes Electric Brake Dust Collection hook up. + about 25' of heavy wire to wire saw up with. School surplus does not looks like it was used hard or much. Delta M/N: 7VK56T34066D P. 208-240V. 3 PH, 60 HZ. 2 HP.
|
|
|
Rockwell Delta Model 12-RAS 12" Radial Arm Saw 2HP
Rockwell Delta Model 12-RAS 12" Radial Arm Saw General Info: Stock# CB-131010 Condition: Used. Good Tested: Yes. Good Working Condition Brand: Rockwell Delta Model: 12-RAS Serial: HN9057 Year: N/A Unit Weight: 325 Lbs. Location: Stone Mountain. GA Specifications: 12" Diameter Blade Capacity. 2HP Motor, 230V, 3Ph. Additional Info: Saw has been tested and is in good working condition. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Drive Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
Delta Radial arm Saw Parts # 438-02-314-0756 10 in.Blade EUC
For sale is one delta radial arm guage and handle.The handle is off of the front of the saw.And the guage the back of the saw.The guage has a part number on it it is 424-12-132-2001,then there is a 5 underneath them.it is off motor# 438-02-314-0756. Thanks for looking
|
|
|
Delta Radial arm Saw Blade guard Motor # 438-02-314-0756 10 in.Blade EUC
For sale is one delta radial arm blade guard for a ten inch blade.This part is all aluminum with no cracks.It is off motor# 438-02-314-0756. Thanks for looking
|
|
|
Delta Radial arm Saw Height Adjustor 26 inch long 7/16th diameter EUC
For sale is one delta radial arm height adjustment.This part is rock solid with just a little surface rust.It is also straight as an arrowThe numbers on it read 42412033 then underneath them it says 2003. Thanks for looking
|
|
|
Delta 12" PROFESSIONAL Radial Arm Saw X5 438-02-314-2067, 230 volts, 3450 RPM
You are buying a used Delta X5 model 438-02-314-2067. 12" Professional Radial Arm Saw. 2 HP 3450 RPM 230 Volts 9.6 Amps 60 Hz Phase 1 Measurements: 60" tall X 22" wide X 32" deep This saw has been tested and is in working order.
|
|
|
DELTA 10 IN Professional Radial Arm Saw with table stand
Saw is practically new. Only used for one project and then stored away. Private owner not commercially owned.
|
|
|
Delta-Milwaukee 12" Delta Radial Arm Saw, Vintage, c. 1951
Model 40-B 12" Delta-Milwaukee"Multiplex" Compound Radial) Radial Arm Saw. C. 1951. Single phase, 2 hp, 220 v motor. Excellent working condition. Original sales catalog included. This item is located in what we believe is its original shop installation since the date of the saw matches the building date. Original owner was a nationally known fine woodworker. Local Pick-up. Please contact me PRIOR to bidding if you want to arrange shipping. All costs for crating and shipping are the buyer's responsibility. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1432e14b689-0xfc-
|
|
|
Delta 12" radial arm saw Industrial Heavy Duty Nice
Very nice Delta radial arm saw. I picked it up at a school surplus sale. I do not know the age of it but it doesn't look that old. This does not have legs it is made to sit on a bench but legs could be easily made or bought from delta. Machine Specifications: Delta# 438-02-314-2068 Model#4VL56T34068D P Volts 200-230-460 3 Phase 60 Hz 2 HP RPM-3450 Serial# 97632 Cat# 52-702 12” Blade I prefer pick up because of the size and weight of this. I may be able to crate this on a pallet so it can be picked up at a loading dock. This would be done at additional cost and arrangements must be made before winning auction. I will not set up shipping this must be done by the buyer. Posted with
|
|
|
DELTA RADIAL ARM SAW MOTOR,TRUNION
FIT'S DELTA RADIAL ARM SAW MODEL#RAS-2C/2F AND MORE
|
|
|
1950's Delta Rockwell 990 Radial Arm Saw Los Angeles area
pick up only)~1950's Delta Rockwell 990 Radial Arm Saw! Works great. Motor super smooth, quiet and powerful. All original stand, needs 1 tiny wheel. Must pick up, heavy, well built.
|
|
|
18" DELTA RADIAL ARM SAW - #26060
18" DELTA RADIAL SAW Serial Number CL4684. EQUIPPED WITH: Turret Arm Construction(360-Degree Rotation) Automatic Cutterhead Return Extra-Long Turret Arm 7.5 HP Motor CATALOGUE SPECIFICATIONS: Blade Diameter. 18" Arbor Size. 1" Crosscut Capacity@1" Depth. 29" Miter Cut Capacity@1" Depth. 22" Depth Of Cut@90-DEGREES. 4-7/8" Depth of Cut w/o Leaf Guard. 6-1/16" Out Rip. Maximum. 41" Bevel Cut@45-Degrees. Maximum. 3" Width of Dado. Maximum. 2" Table Dimensions. W x D. 44" x 36-1/2" Spindle Speed. 3450 RPM Motor Horsepower. 7.5 HP Electrical System. 230-460/3/60 Weight. Approximately. 745 LBS NOTE: Machine Appears To Be In Very Good Condition With A Replacement Price Of $6.847.50. PRICE: F.O.B. OUR WAREHOUSE. $2.450.00. Machinery/Equipment Subject to Prior Sale
|
|
|
Delta 33-990 Radial Arm Saw 9045-58
Delta 33-990 Radial Arm Saw 9045-58-Model No. 33-990-Serial No. 88G25953-Made in the U.S.A. Motor Specifications: Delta No. 438-02-314-0786-MFG. Model No. C48YZBG106-Dae Code: J877-120/240 Volt AC-11.0/5.5 Amp-60 Hz-Single Phase-3450 RPM QUESTIONS Please ask all questions 48 hour before the end of sale. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 If you plan to pick up your item up at our Hillsdale NJ shop. Please, we need one day notice. Your item is in our warehouse and it will have to be pulled and moved to the shop for pick up. SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. We attempt to remove item/s posted on eBay that have sold out of your brick and mortar shop in a timely manner. If in the event an item/s ... moreis purchase on eBay and it has sold out of our store, we will cancel the eBay sale and issue a full refund to the buyer. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. Condition unknown" is defined as the item may or may not run. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment is received for the order to be processed then shipped. Shipping Quotes: Send us your zip code and ship to address is it commercial with or without loading dock or residential. All quotes
|
|
|
Industrial DeWalt Model GP 12 Radial Arm Saw Blades factory delta dp art shop 50
Another find from the Atomic Rescue Mission. As found on facebook as atomicrescue The item is for sale locally. craigs list) if you wish to save money. Here is a big bad Dewalt GP 17 inch stroke. Radial arm saw. Its a single phase 110 volt motor. And spins 10 and 12 inch dia. blades, with a 1.0" dia. arbor. Show up to make money with a killer saw. This thing says the boss is here! I did a simple cleaning. Inspection, and put it together. I fired the motor and found it strong and smooth. I cut for an hour with it last sunday. And was very pleased. It cut square and never felt bad in any way. The slides were in great shape and the bearings run smooth in the tracks. The tracks were cleaned. Inspected, and found to be very good. The head slides smooth and is without slide play. I believe its user ready. Right now I am choking on projects. ... moreAnd just need to make room in my small shop. Come and get it before I fall in love with it. Click this link to see it running: My research shows there is great interest in these. And there is a Dewalt owners forum where these are coveted. Radial arm saws like this were used by the greatest generation. They took them in trucks to a job site and built a house or structure. Old school and high quality is all I see. Condition It looks like there are no cracks anywhere on the frame. And all the pivots are free and move decent. The motor is smooth and the arbor runs true. It could stand a better wood bed or top deck. The one included is not very flat. There is a crack in the larger saw blade shield. At the mounting area flange(pictured) I did not get a head return spring with it. You will have to find one. You should rewire it with a ground plug wiring setup. Its currently 2 prong. There is a stand that comes with it. And is homemade, but stout(and a little rusty) The last few pictures are on a tool chest that is not included. The big cool"ark of the covenant" hand transport beams are in good shape. It was owned by a quality carpenter. Home builder. And WWII vet. Its a clas
|
|
|
Delta / Rockwell Model 16-Ras 16" Radial Arm Saw, 230V, 3Ph, Woodworking
Delta/ Rockwell Model 16-Ras Radial Arm Saw General Info: Stock# EH-713-4-044 Machine Name: Delta/ Rockwell Model 16-Ras Radial Arm Saw Condition: Used. Fair Tested: Yes. Good Working Condition Brand: Delta/ Rockwell Model: 16-RAS Serial: ES4103 Year: N/A Shipping Weight: 1000 Lbs. Unit Dimensions: 96" L x 54" W x 60" H Location: Stone Mountain. GA Specifications: Delta/ Rockwell Model 16-RAS Heavy Duty Radial Arm Saw runs off of 5HP 230/460V/3Ph Motor. 23" Crosscut Capacity. 37" Out-Rip Capacity, 5" Depth of Cut, Table Dimensions are 96" L x 24" D, Spring Return, 1" Diameter Saw Arbor. Additional Info: The Delta/ Rockwell Model 16-RAS Radial Arm Saw has been tested and is in good working condition. The adjustments are tight due to saw was used for only one kind of cut. If you are looking to upgrade ... moreto this Delta/ Rockwell Model 16-RAS Radial Arm Saw from one you are currently using visit our to get a price quote on what we will buy or trade it for. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
DELTA RS830 10" 1-1/2 HP Radial Arm Saw, 115/230-Volt 1-Ph
Bought in 2005. Great saw, lightly used but I'm moving and need to sell it. List price on Amazon is $1875. Listed as local pickup only(Ann Arbor. MI) but meeting halfway or actual cost freight can be arranged via additional charge. Detail-Cast-iron track. Column, and column support for rigidity and continued accuracy-Depth-of-cut control handle and locking levers are positioned above the table for easy access-Extra-large table provides support for wide panels or large work pieces-Provides greater cutting capacity for crosscutting nominal 2-inch thick stock up to 16-inch wide-Miter cutting capacities in nominal 2-inch thick stock are 10-1/2-inches at 45 degree left and 11 inches at 45 degree right-Saw swivels/locks into track to be used as an upside-down table saw.
|
|
|
Delta 10" Deluxe Radial Arm Saw, Model 10, 2HP Motor.
I have for your consideration a Delta 10" Deluxe Radial Arm Saw. Model 10, 2HP Motor. Please check out my other auctions for many types of items including many used tools(high end and low end) as I have a used tool store. Also, please check out my stellar eBay credentials. Thank you and good luck!
|
|
|
Delta 10" Deluxe Radial Arm Saw with Automatic Brake cat # 33-990
Delta 10" Deluxe Radial Arm Saw with Automatic Brake cat# 33-990 Make sure you read this before bidding.This will be a local pick up no shipping and I can't meet you somewhere or half way you need to come to my house if you can't come in person you need to send someone to pick it up for you. I have been using theses guys. Google TSCMOVING then click Quote for shipping price or try USHIP.com to Kingsburg Ca.93631) From part of an estate. Saw is in great shape other than has some scrapes like it had bumped up next to something at one time but it does not hurt it. 1 1/2 hp 115/230 volts 3450 rpm 14.7/702 amps ph1. Like all of the items we sell. This item is sold"AS IS" We sell a wide variety of used items. We try to describe them as best we can but we are not professionals. Nor are we experts on any type of items we sell. ... moreMost of the items we sell are used. When we sell a used item normal wear, scratches, signs of use should be expected. Most items will need a quick cleaning. We do not offer warranties or refunds. Should a refund be granted for any reason it will be less all the shipping fees. All items are sold"AS IS" All sales final. No returns. You are welcomed to come by& pick it up if you live close enough. Please ask any& all questions prior to bidding. Attention PAYPAL users* Due to paypals nonexistent seller protection policy I will only ship to the address paypal sends me NO EXCEPTIONS. I answer all emails. If you are not receiving my emails then check your spam filters on your email. Or that your email address is current with ebay.
|
|
|
Delta Shopmaster Model #RS830 10"Professional Radial Arm Saw
Radial Arm Saw has a 1 1/2 HP. 120/240 V Motor, Automatic blade brake and a 10" saw blade. It has a cast iron track, column and column support for continued accuracy. Depth of cut control handle and locking levers are positioned above the table for easy access. This is a table mount saw and does not come with a stand. Provides support for wide panels or large work pieces. This saw sold for $1500.00 at Sears when it was new. It hasn't been used very much and has been taken good care of making sure to service regularly. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-143dd8b91ac-0x101-
|
|
|
Delta Radial Arm Saw 10" Basically NEW
This is a basically new delta radial arm saw. Still has original blade in it, works great just doesn't get used anymore, haven't used it for the past 5 years at least but has always been in a climate controlled shop, owners manual included and ill also throw in a bench that was made along with it. Local pickup in waynesburg Ohio 44688. Thanks Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-143ec0ff14c-0x105-
|
|
|
14” Delta Radial Arm Saw, Model 33-401, New 2007, Very Little Use
14” Delta Radial Arm Saw. Model 33-401, S/N O7G- 13438, New 2007 14” Blade with 1” Arbor 26” Cross Cut 24” Rip Head tilts 0- 45 Degrees Head Swivels 0- 180 Degrees 5 HP 220/440 Volt 3 Phase Appears Virtually Unused Out of a School Inspect Under Power in Our Branchburg NJ warehouse Questions Call Dave@ 908-399-8133
|
|
|
14” Delta Radial Arm Saw, Model 33-082, School Machine
14” Delta Radial Arm Saw. Model 33-082, S/N 9103658 14” Blade 18” Cross Cut 16” Rip Head tilts 0- 45 Degrees Head Swivels 0- 180 Degrees 5 HP 220/440 Volt 3 Phase Very Good Condition Out of a School Inspect Under Power in Our Branchburg NJ warehouse Questions Call Dave@ 908-399-8133
|
|
|
Delta 33-892 12" Radial Arm Saw, 2HP, 230V, 3-Phase, Woodworking
Delta 33-892 Radial Arm Saw General Info: Stock# CD-141040 Machine Name: Delta 33-892 Condition: Used. Good Tested: Yes. Good Working Condition Brand: Delta Model: 33-892 Serial: 95 H 96916 Year: N/A Shipping Weight: 450 Lbs. Shipping Dimensions: 48" L x 40" W x 52" H Location: Stone Mountain. GA Specifications: Delta 33-892 Radial Arm Saw. 12" Blade Capacity. 2HP Motor, 230/460V(Wired 230) 3-Phase, 5/8" Arbor, 3450 RPM. Additional Info: The Delta 33-892 Radial Arm Saw has been tested and is in good working condition. If you are looking to upgrade to this Shaper from one you are currently using visit our to get a price quote on what we will buy or trade it for. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine ... morethan the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
Delta Rockwell 14" radial arm saw model 14RAS compound miter cutoff saw 24" arm
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500 Selling a Delta Rockwell 14" radial arm saw. It is a model 14RAS. Saw is outfitted with a 5 horsepower 220 volt three phase motor. Equipped with a magnetic starter for push button on and off. This price includes a 14" carbide saw blade. Saw is capable of performing compound miters. Crosscuts and long rip cuts like a table saw by turning the head sideways. Carriage rolls nice and smooth, and all adjustments work fine. It runs very smooth and quiet. WE HAVE A FORKLIFT HERE TO LOAD IT ONTO A TRUCK OR TRAILER. MACHINE WEIGHS APPROXIMATELY 650 LBS FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. PLEASE EMAIL OR CALL ... moreUS FOR A SHIPPING QUOTE. SHIPPING TO A COMMERCIAL LOCATION IN THE CONTINENTAL US SHOULD BE BETWEEN 150-300 DOLLARS. BUT YOU MUST CONTACT US FOR AN EXACT PRICE. LOCAL PICK UP IS MORE THAN WELCOME, BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
|
|
|
Delta 12" Radial Arm Saw 33-891 2 HP 1 phase
This is a Delta 12" radial arm saw model 33-891. It's in very clean overall shape. Comes with factory magnetic starter and 2 HP 220V 1 phase motor. Could use new table boards. Currently has an old 10" blade on it. A small section of arbor thread is stripped, but you can see in the pictures that the blade nut screws down fine. Local pickup only in Bettendorf. IA.
|
|
|
Delta 10" Radial Arm Saw super 990 with lots of extras jacobs chucks keys etc
saw works powered on turns on with no problems haven't tested anything else nor do I really know how feel free to preview in person before bidding must pick up within 2 weeks of end of auction unless we work something else out PLEASE SEE PICTURES AS WELL AS ASK QUESTIONS BEFORE BIDDING EVERYTHING IN PICTURE WAS IN INSIDE THE CABINET I ASSUME IT WORKS WITH THE SAW ALSO THERE IS A FEW MORE PARTS THAT DID NOT MAKE IT IN THE PICTURE THANK YOU PICK UP IN CHICAGO IL 60634. ALSO VERY VERY HEAVY AND LARGE
|
|
|
Rockwell Delta 40-C 12" Radial Arm Saw, 3HP, 3-Phase, Woodworking
Rockwell Delta 40-C 12" Radial Arm Saw General Info: Stock# CB-141002-2 Machine Name: Rockwell Delta 40-C 12" Radial Arm Saw Condition: Used. Good Tested: Yes. Working Condition Brand: Rockwell Model: 40-C Serial: DN 606 Year: N/A Shipping Weight: 750 Lbs. Shipping Dimensions: 60" L x 48" W x 70" H Location: Stone Mountain. GA Specifications: Rockwell Delta 40-C 12" Radial Arm Saw. 12" Blade Capacity. 3HP Motor, 230/460V(Wired 230) 3-Phase, 19" Rip Capacity, 1" Arbor, 4-5/16" Maximum depth of cut, Magnetic Starter. Additional Info: The Rockwell Delta 40-C 12" Radial Arm saw has been tested and is in working condition. Saw runs good. But adjustments are tight due to it being used only for one kind of cut. If you currently have surplus equipment you are not using, visit our to get a price ... morequote on what we will buy or trade it for. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
Delta Model 10 Deluxe Radial Arm Saw with Automatic Brake with Shop Fox Stand
Delta Model 10 Deluxe Radial Arm Saw with Automatic Brake with Shop Fox Stand This is my dad's. He has a ton of machinery and is in the first stages of dementia so we are trying to sell his machinery that he can no longer use. He hasn't used this for much last 4 years, but still works perfectly. ANY QUESTIONS PLEASE ASK
|
|
|
Rockwell Delta 40-C 14" Radial Arm Saw with Short Stop Electric Motor Brake
Rockwell Delta 40-C 14" Radial Arm Saw w/ Motor Brake General Info: Stock# CB-141002-4 Machine Name: Rockwell Delta 40-C 14" Radial Arm Saw Condition: Used. Good Tested: Yes. Good Working Condition Brand: Rockwell Model: 40-C Serial: DN 684 Year: N/A Shipping Weight: 750 Lbs. Shipping Dimensions: 60" L x 48" W x 70" H Location: Stone Mountain. GA Specifications: Rockwell Delta 40-C 14" Radial Arm Saw with Short Stop Electric Motor Brake. 14" Blade Capacity. 3HP Motor, 230/460V(Wired 230) 3-Phase, 19" Rip Capacity, 1" Arbor, 4-5/16" Maximum depth of cut, Magnetic Starter. Short Stop Electric Motor Brake. Max HP 5, Model SS-2A-5. Additional Info: The Rockwell Delta 40-C 12" Radial Arm saw has been tested and is in good working condition. This particular saw is equipped with short stop electric ... moremotor brake which allows the blade to stop at a much faster rate. A very nice feature. If you currently have surplus equipment you are not using, visit our to get a price quote on what we will buy or trade it for. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
DELTA PROFESSIONAL 10 INCH RADIAL ARM SAW with extension table
10INCH PROFESSIONAL RADIAL ARM SAW MODEL 33-830 NICE SHAPE local pickup only
|
|
|
delta 12" Radial arm Saw 33-893
Delta 12" Radial Arm Saw in very good condition. No wear that I can see. No rust and paint is very good. In the photos you can see the LVC- the 24 volt low voltage controls. It has a 3 phase motor and is clean and lubed with new blade and ready to use. Came from local school where it obviously wasn't used much at all. Check the photos! I can deliver within 100 miles or maybe more(depends on my schedule) just ask me for more info about that. If buyer find a shipper- I can remove legs. Put it on a pallet, and drop it at the terminal- but I will not work out the details to truck ship. Thanks for looking!
|
|
|
Vintage Rockwell Delta Milwaukee 12" Radial Arm Saw, 3HP, Woodworking, 3-Phase
Rockwell Delta Milwaukee 12" Radial Arm Saw General Info: Stock# MB-141010-6 Machine Name: Rockwell Delta Milwaukee 12" Radial Arm Saw Condition: Used. Good Tested: Yes. Good Working Condition Brand: Rockwell Model: Delta Milwaukee Serial: MX2-9903 Year: N/A Shipping Weight: 450 Lbs. Shipping Dimensions: 48" L x 48" W x 55" H Location: Stone Mountain. GA Specifications: Rockwell Delta Milwaukee 12" Radial Arm Saw. 12" Blade Capacity. 3HP Motor, 220/440V(Wired 220) 3-Phase, 18" Rip Capacity, On/Off Switch. Additional Info: The Radial Arm Saw has been tested and is in good working condition. Great Vintage piece of machinery. If you currently have surplus equipment you are not using. Contact us to get a price quote on what we will buy or trade it for. Seller Contact Information: Mark Davis 404-272-1285 ... moreThe Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
|
|
|
Delta 1.5 HP 10" Radial Arm Saw
Delta 10" Professional Radial Arm Saw Strong running. 1-1/2 HP, American made, solid tool. It runs great, I just need to make room. What you see is what you get: saw. Removable legs, and newly installed table. Similar Delta saw sells for $1.500 + when new. I'm asking $300. O.b.o. Local pickup only. Come power it up before you buy. I'll accept cash at pick-up or an electronic payment using PayPal.
|
|
|
DELTA 10" Professional Radial Arm Saw (Model 33-830)
Very nice used DELTA 10" Professional Radial Arm Saw. Model No. 33-830. Includes wheeled base enabling one person to easily move the saw around the shop or garage. Local pick-up only-OR- packing/boxing and shipping(freight) can be arranged at your additional expense.
|
|
|
DELTA 14" RADIAL ARM SAW SINGLE PHASE 3 HP EXTRA LARGE TABLE
DELTA 14" RADIAL ARM SAW SINGLE PHASE 3 HP EXTRA LARGE TABLE DELTA 14" RADIAL ARM SAW SINGLE PHASE 3 HP EXTRA LARGE TABLE THE SAW WORKS GREAT. IT SLIDES AND RAISES WITH EASE THE MOTOR IS STRONG AND VIBRATION FREE. PLEASE LOOK AT ALL OF THE PICTURES AND THE YOUTUBE VIDEO http:youtu.be/FoO7jkAZisY SO YOU CAN SEE THE CONDITION OF THE SAW. THE SAW WILL SHIP VIA FREIGHT SO PLEASE EMAIL YOU ZIP CODE AND IF IT IS GOING TO A HOUSE OR BUSINESS AND IF YOU HAVE A FORKLIFT TO UNLOAD AND I WILL GET YOU A QUOTE.
|
|
|
radial arm saw,delta millwaukee, michigan
commercial grade radial arm saw delta-Milwaukee 14 inch saw 3 phase good condition. pick up only no shipping available
|
|
|
DELTA/ROCKWELL 14" RADIAL ARM SAW W/PHASE CONVERTER
DELTA/ROCKWELL 14" Radial Arm Saw; 3HP; 220/440; 3-phase Model# MJ-4789 Includes Leeson Rotary Phase Converter for operation on single-phase power. Used but in Great Condition. Local pick-up or delivery in Columbus. TX, but will deliver to Houston, TX and surrounding areas. Please let me know if you have any questions. Serious buyers only. No international buyers. Will consider reasonable offers.
|
|
|
Delta Radial Arm Saw Industrial 16" 33-412 EXCELLENT CONDITION!!!!!
DELTA 16" 33-412. EXCELLENT CONDITION WILL NOT FIND A NICER UNIT OVER $6.000.00 NEW. READY TO INSTALL AND GO TO WORK FREIGHT ALL EBAY ITEM SOLD AS IS NO RETURNS NO WARRANTY THANK YOU
|
|
|
Delta Rockwell 14" Radial Arm Saw, 3HP, 230/460V, 3PH, Cleaned / Checked
Delta Rockwell 14" Radial Arm Saw 3HP 3PH motor Cleaned and checked Machine can be loaded at no charge. Please Email or call 1-800-793-4494 if interested in this machine. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping and freight costs associated with getting this machine to your location. Pick-up of this machine is available also. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to prior sale. May be withdrawn from sale at any time as it is listed on our website and in other advertising. TERMS: Immediate Payment with order. Full payment or deposit required within 24 hours of purchase. Items with no payment or deposit after the 1st seven days will be immediately ... morereported to eBay as unpaid. Cash in person. M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DELTA RADIAL ARM SAW INDUSTRIAL 16" 33-411 5 HP 3 PH 3450 RPM
DELTA INDUSTRIAL SAW CAT. NO. 33-411 PRESS WAS REMOVED FROM A WORKING ENVIROMENT. BUT WE HAVE NOT TESTED SO IT IS BEING SOLD AS IS AND ALL SALES ARE FINAL. BUYER IS RESPONSIBLE FOR ARRANGING FREIGHT AND PROVIDING AFS WITH PICKUP DATE AS WELL AS EMAILING OR FAXING(210-658-2244) A COPY OF THE BILL OF LADING AT LEAST 2 DAYS BEFORE PICKUP IS SCHEDULED. FORKLIFT IS AVAILABLE FOR LOAD OUT. A PALLETIZING FEE OF $40 WILL BE ADDED TO TOTAL INVOICE IF ITEM IS BEING FREIGHTED. THIS FEE INCLUDES BANDING ITEM TO SKID. THE INFO NEEDED TO GET A QUOTE FOR FREIGHT WILL INCLUDE THE ZIPCODE 78108. THE WEIGHT APPROX. 700 LBS. AND PALLET DIMENSIONS 48"X48"X48" ITEMS WILL BE CONSIDERED ABANDONED IF THEY ARE NOT PICKED UP WITHIN 30 DAYS OF AUCTION ENDING. Disclaimer- ALL ITEMS NEW OR USED ARE SOLD AS IS AND ALL SALES ARE FINAL. QUESTIONS? PLEASE ... moreCALL 210-566-3300 or text us at 210-273-3394 Check out my other items! Be sure to add me to your favorites list!
|
|
|
CRAFTSMAN 9 3279 RADIAL ARM SAW MITER VISE DEWALT MBF GW DELTA CRAFTSMAN RYOBI
SPECIALLY DESIGNED FOR RADIAL ARM SAWS CRAFTSMAN RADIAL ARM SAW ACCESSORY.MITER VISE 9-3279 CAN BE USED ON ALL RADIAL ARM SAWS WORKS GREAT.HAS CHIP IN END OF RIGHT FENCE.SEE PICTURES BOX IS IN ROUGH SHAPE. Check out my! I WILL DO MY BEST TO SHIP ITEM THE DAY AFTER PAYMENT IS RECEIVED ANY QUESTIONS OR IF YOU WOULD LIKE MORE PICTURES PLEASE CONTACT ME VIA EMAIL OR 401-338-8748 PAUL
|
|
|
Delta Rockwell 10" Radial Arm Saw 438 02-314-0608 w/ Stand
Delta Rockwell 10" Radial Arm Saw 438 02-314-0608 w/ Stand Up for auction is a used Delta Rockwell 10" Radial Arm Saw 438 02-314-0608 with Stand. This item is in good condition with some minor cosmetic wear from normal use. There are some scuff marks and scratches on the item but this does not effect the functionality of the item. All the function knobs and handles are in good condition with no dents or cracks. The base is in good condition as well. Please refer to the photos below for more details on the item. This item was plugged in and powered on with no problems. We were able to slide the saw back and forth without any issues as well as rotating the arm at different angles. We were also able to raise and lower the saw without any issues as well. The motor ran without any issues or problems and we had no problems cutting through ... morea pine 2"x4" This item also includes a 10" blade. Specifications: Brand: Delta Rockwell Model: 438 02-314-0608 230/460 V 3 Phase 5.8/2.9 Amps 2450 RPM Thank You. Good Luck, and Happy Bidding! This item will require freight shipping or local pick up at our facility in Christiansburg. VA 24073. The freight calculator below will show your shipping charges. We will add $40 for palatalizing the item. This includes strapping it to a skid and wrapping with stretch wrap as well as cardboard and bubble wrap if it needs it. Should you wish to schedule your own freight shipping. We will only charge the palatalizing fee. The freight calculator will ask for your Zip and a description of your delivery location. To save on shipping. Shipments can be picked up at a freight terminal for the same price as a business shipment with dock. If the shipment needs to be brought inside by the carrier(not including loading dock) give us a call for a quote. If you have any questions give us a call at 540-381-3011 or send us an e-mail through eBay. Please note: Schools& Churches are generally considered limited access or residential. Freight calculator Enter your zip code Select a del
|
|
|
Delta 33-410 16" Industrial Radial Arm Saw
16" Radial arm saw in very good working condition. Three horse-power 230V single-phase motor. Three carbide blades and owner's manuals included. Pickup only or shipping arrangements by purchaser. If you are paying by cashier's check. Please allow time for check to clear. Item is for sale locally and auction will be terminated if sold.
|
|
|
CRAFTSMAN 9 3279 RADIAL ARM SAW MITER VISE DEWALT MBF GW DELTA CRAFTSMAN clamp
Used but in good shape.
|
|
|
DELTA PIVOT RADIAL ARM SAW 33-892, 12"
THIS UNIT IS SURPLUS FROM A LOCAL UNIVERSITY. SOME PARTS WERE REMOVED TO KEEP ANOTHER SAW GOING, SO WE ARE NOT SURE WHAT IT NEEDS TO BE COMPLETE, BUT MOTOR(230/460V 3PH) IS IN WORKING CONDITION AND EVERYTHING MOVES AS IT SHOULD. Normal 0 false false false EN-US JA X-NONE THIS ITEM WILL SHIP BY FREIGHT AT BUYERS EXPENSE. FOR A QUOTE PLEASE CONTACT WAYNE AT FREIGHTQUOTE.COM- 1-800-323-5441 EXT.6348. BEFORE CALLING PLEASE HAVE YOUR DELIVERY ADDRESS READY AS WELL AS THE DIMENSIONS AND WEIGHT OF THIS ITEM. SHOWN BELOW. DIMS: 40X48X60 WEIGHT: 300LBS
|
|
|
2000 Delta Radial Arm Saw
Original owner. Five horse power, fourteen inch blade, thirty six inch poll, bought it in 2000.
|
|
|
Delta Model 10 Deluxe Radial Arm Table Saw with Automatic Brake 10” Blade PARTS
Search our eBay Store! Delta Model 10 Deluxe Radial Arm Table Saw with Automatic Brake 10” Blade PARTS SKU: JV-MAT-A-DELTA10RADIAL Condition: For parts or not working Packaging: Pallet/Skid Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Delta Model 10 Deluxe Radial Arm Table Saw with Automatic Brake 10” Blade PARTS BEING SOLD AS-IS FOR PARTS OR REPAIR Model: 10· Unit does not power on. Dimensions(L”xW”xH” 25*35*50 Blade Diameter: 10” As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 6. SEE PHOTOS. ... moreAll images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facili
|
|
|
DELTA SUPER 990 RADIAL Arm SAW Manual RR94 installation operation adjust 1961
This sale is for ONE previously owned COPY of: Rockwell Manufacturing Company. DELTA'SUPER 990' RADIAL SAW. PM-424-01-651-0002, Pittsburgh 1961) 13 pages bound in a soft cover with seven holes punched near the spine(for storage in a dealer's binder) This manual provides images and information on the installation of the machine. Micro set mitre stops, motor brake, application and a parts list. This item is in good overall condition and would be a useful resource for the owner of the machine. Restorer of older machines or repair person. It will also make a nice gift for the collector of Delta products. This PUBLICATION is being offered at any exceptional price. A rule may appear in the photographs for scale reference only and is not part of this sale. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday ... moreto Friday. Please check my other auctions of precision watchmakers. Machinist tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their go-vernment when items cross the border. These are the sole responsabi. Lity of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents, so please don't ask. We now accept PAYP AL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability. Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies
|
|
|
HEAVY DUTY Delta Radial Arm Saw MULTIPLEX - 5hp - w/Dust Hood and Roller Table
Nice Delta Radial Arm Saw. 5 HP 3 Phase 220v or 440v. Taken straight out of working wood shop/ factory in Cleveland. I have not hooked up or run myself but I don't expect any issues. Comes with a homemade dust collection hood and a 4ft long roller/support table. A shelf/support, and a box full of additional rollers. Pickup only. Item located in Akron. 44333. Unfortunately, I have very limited availability between now and the end of the month. I may be able to coordinate to have a relative meet you to pickup the unit. In this case, pickup would likely need to occur on a Saturday or Sunday. I expect to be back and personally available anytime between 6/30 through 7/5 so we can coordinate a pickup then if that works better. Bring help to move and load the saw and preferably an open trailer! Unit is heavy- 400+ lbs. Payment in full by PayPal ... morewithin 48 hours of auction end(by direct withdrawal from your bank account; otherwise add 3% to the final auction value to cover credit card fees if paying by credit card) Thanks!
|
|
|
Rockwell Delta 438-02-314-0376 Radial Arm Saw with Stand
Rockwell Delta 438-02-314-0376 Radial Arm Saw with Stand Product is sold as is and no warranty is implied; UNLESS EXPLICITLY EXPRESSED BY AS IS WHERE IS. LOCAL PICK UP ONLY FROM CLEVELAND OHIO 44103 Check out my! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-146a458f648-0x120-
|
|
|
Delta 33-063 18" 200-208/400volt 5hp 3phase Radial Arm Saw
0 0 1 309 1762 L H Stevens Constructors LLC 14 4 2067 14.0 Normal 0 false false false EN-US JA X-NONE Delta Model 33-063 18" Radial Arm Saw 200-208/400 volt 5hp 3phase motor(std length arm) Bought used three years ago for parts(the electric braking) but the saw was too good to part out. Never actually set it up in the temporary job site shop we had. And I do not have 3phase power, or enough space to justify continued storage in my permanent location. The saw was test run; motor and braking are good. I recently went through trunnions, detent pins and rollers; cleaned and lubed, and all works easily, no frozen parts. I checked blade runout with a dial caliper, and it is.011" at the rim, so you can count on good cuts. One blade comes with the saw. It has a lot of chipped teeth, but the plate looks good and worth re-tipping. I have ... moreno blade wrenches for this saw, and there are no wood tops and fence, otherwise it is complete as far as I know. Condition is good for age, with relatively minimal dings and rust. I accept PayPal only. And only to confirmed addresses. No foreign or Canadian sales, continental US only please. I will make every effort to have this shipped within 3 business days of receipt of confirmed payment(including crating, if required) If you can do local pick up, I can load your pick-up or small flatbed truck at my shop, no charge, obviously. Shipping is actual cost through Freightquote.com, or a freight broker of your choosing. I can arrange everything through my freight broker, but this may be slower and more cumbersome, due to the billing issues. Because my shop is technically residential, if you send me the bill of lading. I will deliver to any Denver area freight terminal at no charge. This saves the cost of liftgate service on pick-up by the trucking company. Figure about 800 lbs total weight with crate. I highly advise crating. I can do 4 full sides of 7/16” OSB. With partial cover for the top and the saw securely bolted to the forklift skids, for $125. This will protect against slidin
|
|
|
Delta Rockwell 14" Radial Arm Saw, 2HP, 230/460V, 3PH FOB-MkOffer
PLEASE READ ALL: This listing is for a friend that I worked with as an apprentice. Who is now the local electrical inspector. I have never seen this unit, and I don't have three-phase power to test it. Kevin states that it is in good operating condition, complete and ready to go to work for you. Sold FOB, please call 231.33O.464O for a freight quote prior to purchase. If you prefer, I can give you his# as well, you can talk directly to him for questions about condition, etc. Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146a62962e3-0x112-
|
|
|
Delta radial Arm saw 6" crank
good crank,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-146bfd3e15f-0x10d-
|
|
|
DELTA 14-Inch Radial Arm Saw 33-400
3hp Volts 230 Hz 60 Rpm 3450 Amps 13.0 DELTA-no 438-02-314-2032 This saw is in great condition it moves freely and easy and has been garage stored. It was last used 2009. I'm not sure when this saw was manufactured feel free to ask any questions Buyer is responsible for shipping!
|
|
|
1980s 14" Delta Radial Arm Saw (33-381) w/ Dust Collector (Dillsburg, PA)
LOCAL PICKUP ONLY in Dillsburg PA(Near Harrisburg. PA) I am helping my grandfather sell his 14" Delta Radial Arm saw. It also comes with a dust collector(shown in teal color) and associated plumbing between the two. There is a link below with exploded diagrams and a parts list. Please feel free to email with any questions. The saw is in great condition and comes from an era of high quality US manufacturing(probably late 70s/early 80s) Well cared for. Single Phase Electric* Extra Frued Blade(very expensive. Very high quality, brand new never used) Large work table can be disassembled for transport. There is a data tag on tge motor that is not pictured. It reads; Delta# 438-02-314-0988 SM 1 49 CFR 21 AA w HP 3 RPM 3450 V– 230 Amp 15 HZ 50 PH 1 Service Factor 1.0 Frame 140 Z Insulation ClassB Max. Ambiant 40 C Time rating- Type CFR Design ... moreletter L KVA Code H Thanks for viewing my ad. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-146d4eaa8ba-0x114-
|
|
|
Delta Rockwell 14" Radial Arm Saw, 33-382, 5HP, 230/460V, 3PH, Cleaned /Checked
Delta Rockwell 14" Radial Arm Saw 5HP. 3PH motor Model 33-382 5 HP- 3.450 RPM Motor, 14" dia. blade cap. 5/8" dia. arbor, Max. dado cap. 1-13/16" Equipped with: 0°- 45° Tilting saw head Saw carriage swivels 0°- 180° w/quick positive stops@ 45°& 90° Complete with: self-braking motor. Magnetic controls, overload protection switch, and push button station, All specifications are believed to be correct. But may need to be verified. Cleaned and checked Machine can be loaded at no charge. Please Email or call 1-800-793-4494 if interested in this machine. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping and freight costs associated with getting this machine to your location. Pick-up of this machine is available also. DELIVERY: Varies upon warehouse workload and potentially ... morethe item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to prior sale. May be withdrawn from sale at any time as it is listed on our website and in other advertising. TERMS: Immediate Payment with order. Full payment or deposit required within 24 hours of purchase. Items with no payment or deposit after the 1st seven days will be immediately reported to eBay as unpaid. Cash in person. M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. Powered by The free listing tool. List your items fast and easy and manage your active items. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-146d734c9ed-0x112-
|
|
|
One Lot of Delta Radial Arm Saw Parts 6767-545
One Lot of Delta Radial Arm Saw Parts 6767-545 Shipping Info: Weight: 15 Size: 13*13*9 QUESTIONS Please ask all questions 48 hour before the end of sale. Please note our eBay department is closed on Saturdays and Sundays. We will work to answer your questions as quickly as possible. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 If you plan to pick up your item up at our Hillsdale NJ shop. Please, we need one day notice. Your item is in our warehouse and it will have to be pulled and moved to the shop for pick up. SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. We attempt to remove item/s posted on eBay that have sold out of our brick and mortar shop in a timely manner. If in the event an item/s is purchase on eBay ... moreand it has sold out of our store, we will cancel the eBay sale and issue a full refund to the buyer. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. Condition unknown" is defined as the item may or may not run. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment is received for the order to be processed then shipped. Please note our eBay department is closed on Saturdays and Sundays. We will work to answer your questions as quickly as possible. Shipping Quotes: Send us your zi
|
|
|
Lot of Delta radial arm saw parts 6 in. Crank, wrench, dial, guide
If you like this auction I will be adding other penny to start auctions throughout the weekend! Make sure to check them all out!
|
|
|
G110105 Delta 33-401 14" Long-Arm Radial Arm Saw
Click to Enlarge) Product ID# G110105 This Delta 33-401 14" Long-Arm Radial Arm Saw appears to be in good cosmetic condition. Although there are a few small dings, scratches, signs of previous use. Please look at the photos. The unit powers-up and the saw blade rotates smoothly. This is the only testing that has been performed. I looked closely at the carbide teeth on the blade and several are chipped and dull. I would suggest replacing the blade before using the saw. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as“Not Working” This saw REQUIRES 220Vac 3-phase electrical input. The saw is mounted on a custom base with wheels on it. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the ... moreequipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 58“L x 50“W x 66“H. Due to the size/weight of this unit. A custom made pallet or crate may be required to ship it. The cost of the pallet/crate(if required) will be paid for by the winning bidder. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 1115 pounds Buyer pays freight plus a fixed handling fee of 35 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery
|
|
|
Delta Rockwell 16" Radial Arm Saw, 5 HP, 460 V, 3 PH
ID# P-2-040 Sold As Is. Where Is. Please inquire for further details. 3 Phase. 460 V, 5 HP Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items ... morenot paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.
|
|
|
Index Ring Part for Delta Rockwell 10" Radial Arm Saw ??? (33-892) ???
Not sure what the model numaber was. It is 7/8" thick x 5.620 OD x 4.200 top ID& 4.375 bottom ID. This is in good useable condition. It was removed from either a 10" or 12" saw. Not sure which. I don't know if it makes a difference. Please check the photos to verify condition and correctness of item. I will combine shipping whenever possible. Email me to request an invoice before paying for multiple items. Please check my other listings. Payment must be made within 2 days of auction close. I will appreciate positive feedback after you are satisfied with the item. I will then return good feedback. If you feel the item is not as described please let me know before leaving feedback. I want to work with you to resolve any problems. Email me any questions you have before bidding. Thanks for looking.
|
|
|
Delta 33-990 Radial Arm Saw 3456-4 2
Delta 33-990 Radial Arm Saw 3456-4 Shipping Info: Weight: 175 Size: 36*24*24 QUESTIONS Please ask all questions 48 hour before the end of sale. Please note our eBay department is closed on Saturdays and Sundays. We will work to answer your questions as quickly as possible. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 If you plan to pick up your item up at our Hillsdale NJ shop. Please, we need one day notice. Your item is in our warehouse and it will have to be pulled and moved to the shop for pick up. SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. We attempt to remove item/s posted on eBay that have sold out of our brick and mortar shop in a timely manner. If in the event an item/s is purchase on eBay and it has ... moresold out of our store, we will cancel the eBay sale and issue a full refund to the buyer. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. Condition unknown" is defined as the item may or may not run. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment is received for the order to be processed then shipped. Please note our eBay department is closed on Saturdays and Sundays. We will work to answer your questions as quickly as possible. Shipping Quotes: Send us your zip code and
|
|
|
Delta 16" Industrial Radial Arm Table Saw 5 HP 3 Phase Model 33-412 w/ 3 Blades
Delta 16" Industrial Radial Arm Table Saw 5 HP 3 Phase Model 33-412 w/ 3 Blades Mouse over images to see larger version Click to view supersize image Delta 16" Industrial Radial Arm Table Saw DESCRIPTION: 1 Used Delta 16" Industrial Radial Arm Table Saw 5 Horsepower 3 Phase w/ 3 Total Blades. MODEL: 33-412 See Product Information and Specifications CONDITION/FUNCTIONALITY: Pulled from a working environment. No testing was performed on this item as we do not have a 3 Phase outlet which this machine requires. Item has some minor cosmetic scuffs/scrapes but all parts seem to be present and in overall good condition(see pictures) 14 Day DOA Warranty. DC to 10 MHz bandwidth, 1 MHz single-shot storage bandwidth, 10 MHz repetitive storage bandwidth, Fully isolated dual vertical channels, 5 mV to 50 V per division vertical deflection ... moresensitivity, 50 ns to 20 sec per division time base, On-screen readouts, Auto setup and auto level triggering, Minimum three hour operating time with a fully charged battery, Four hour recharge time with instrument off, Auto time out when not in active use, Envelope mode peak detect for glitch capture, Averaging for smoothing of last four waveform acquisitions, Continuous envelope mode for monitoring signal changes, Four front-panel setup save memories, Four waveform save memories, Fully configurable front panel and waveform transfers via the RS-232 communications port- See more at: http:www.testequipmentconnection.com/4022/Tektronix_222.php#sthash.mvfQ9Vh5.dpuf DC to 10 MHz bandwidth, 1 MHz single-shot storage bandwidth, 10 MHz repetitive storage bandwidth, Fully isolated dual vertical channels, 5 mV to 50 V per division vertical deflection sensitivity, 50 ns to 20 sec per division time base, On-screen readouts, Auto setup and auto level triggering, Minimum three hour operating time with a fully charged battery, Four hour recharge time with instrument off, Auto time out when not in active use, Envelope mode peak detect for glitch capture, Averaging for smoothing of last four
|
|
|
Rockwell Delta Radial Arm Saw Series 14-RAS.
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Rockwell Delta Radial Arm Saw Series 14-RAS. Item Description: Rockwell Delta Radial Arm Saw Series 14-RAS According to district was in working condition when removed from service. This could not be verified. ... moreAppears to be in good condition. Model: 28-300. Measures 42" x 34" x 62" The unit is 220 and could not be tested. S/N: GG3955. Note: There is no assistance or equipment at this location. Buyer must handle and load without assistance. Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Tahoe City. CA 96165 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 41178) nbsp, nbsp, Model: 14-RAS, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Condition: This item is used and sold as-is. Due to the location. This item was NOT TESTED for operation. Item may need service and/or parts to make operational
|
|
|
Delta 12" Radial Arm Saw Commercial Grade
3 HP 3 Phase saw motor includes 12" carbide blade has metal legs on original stand. Has automatic saw stop to stop blade instantly when shut down. Ready to hook up- all switch is on saw. Palletizing is not included. But will load with forklift.
|
|
|
Delta Radial Arm Saw 1 1/2 Horsepower Motor
Used Delta Radial Arm Saw for local pickup only. Not used in many years. Table will need rebuild. But saw is in good working condition.
|
|
 |