|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Experience exceptional performance with VEVOR ratchet pipe threader kit. Featuring 3 threading hinge plate heads (1/2" NPT, 3/4" NPT, 1" NPT) to accommodates ... morea wide range of tube sizes. 9SICR die head teeth can withstands heavy load without deformation, ensuring precise and non-slip threading.
Buy It Now
Free Shipping Condition: New Location: Lincoln, United States This listing is for a new air compressor piloted unloader valve with built-in check valve. This is most commonly used on gas-powered air compressors. ... moreThe pilot valve is set for 140 to 175 PSI from the factory but can be adjusted if needed 30-40 PSI higher or lower. This valve has a 1/2" Female NPT Air inlet and a 1/2" Male NPT air outlet. There is a 1/8" Port on the side for a throttle control valve or cable. Also on the side of the valve, there is a 3/8" Female NPT Outlet to release the air once the compressor reaches full pressure. It also comes with a 3/8" Male NPT Air muffler to help reduce noise. This can be removed if needed. The pilot valve has a toggle lever on the top that can be put in the upward position for load free engine start or throttle control.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This air pressure regulator effectively filters airborne impurities and particles to give you better air quality. It is made of die-cast aluminum, ... morewhich is anti-corrosion, rust-proof, and robust for a more inclusive installation environment. Using fiber and pure copper filter elements, it is triple-filtered to get better results. It will be the ideal choice for you! Specification Material: Die-cast Aluminum Protective Cover Material: Alloy Filtration: Triple Cup Material: Polycarbonate Filter Model: AW4000-04 Oil Mist Filter Type: AL4000-04 Filter Material: Copper/Fiber Rated Flow Rate: 4000L/min Operating Pressure: 0.05-0.85mpa Filtration Precision: 40um Working Temperature: 5 to 60°C Working Media: Compressed Air Interface Port Size: 1/2" NPT.
Buy It Now
Free Shipping Condition: New Location: Mentor, United States " CLOSE HEX NIPPLE 1" NPT 304 STAINLESS. -1" NPT MALE - 1" NPT MALE. -Quantity: 2 Hex nipples. -304 STAINLESS STEEL CASTED FITTING. -Illustrated picture, ... morereflects, type,finish and quality of actual item.
Buy It Now
Free Shipping Condition: New Location: Valrico, United States 2x 1/4 NPT Male Brass Nickel Hex Head Socket Pipe Plugs Pipe Fitting End Cup.
Buy It Now
Free Shipping Condition: New Location: Sagle, United States 3/8" Male JIC X 3/8" Female JIC 90 DEGREE FORGED FITTING. -06 JIC Thread 9/16"-18. Should a problem arise with an order, we will make it right.
Buy It Now
Free Shipping Condition: New Location: Lincoln, United States 3/8" Male NPT x 3/8" Compression Brass Connector This is a 3/8" male NPT by 3/8" compression straight pipe connector. This fitting connects 3/8" OD brass, ... morebronze, copper, steel, aluminum or iron pipe to a 3/8" female NPT outlet or fitting in a straight line.
Buy It Now
Free Shipping Condition: New Location: Houston, United States (THREADED (NPT) FLANGE. THREADED FLANGE STEEL. RAISED FACE. 2" 150 CLASS. unless special request are made). All products represented by Mainland Valve ... more& Fitting, Inc. that is noted as surplus are surplus and are not represented by any manufacture.
Buy It Now
$4.47 Shipping Condition: New Location: Hilliard, United States 1/2" Interrupted Thread Pipe Tap. X-10 Heat Treat.
Buy It Now
Free Shipping Condition: New Location: Florence, United States Quantity95pcs 135pcs 145pcs 120pcs 115pcs 110pcs. Characteristics: high quality, no leak and no rusting, much better than steel zerk fitting;. The precision ... moremachining gives a clear thread without detritus.Allows the zerk grease to be well connected to other objects.
Buy It Now
Free Shipping Condition: New Location: Reading, United States 3/4" BRASS FLOOR FLANGE LEAD FREE.
Buy It Now
Free Shipping Condition: New Location: Kenosha, United States 1/8"-27 NPT Male x 7/16"-24 Female Inverted Flare Fittings. The 1/8"-27 NPT Male x 7/16"-24 Female Inverted Flare design. The 7/16"-24 Female end goes ... moretogether with 1/4" standard Brake Lines (Double Flare).
Buy It Now
Free Shipping Condition: New Location: Fort Worth, United States Type: 3/16" OD Barb X 1/8" Male NPT Male Brass Hose Barb. 3/16" X 1/8" Brass Hose Barb. NPT Thread Sizing Info. Material: Brass.
Buy It Now
Free Shipping Condition: New Location: Waco, United States 1" NPT Thread 3/4" body Flat Face High Flow Quick Connect Coupler TL50. Model number:TL50. Flat Face couplers are designed for applications wherehydraulic ... morespillage is a concern. Coupler Thread Size:1" NPT.
Buy It Now
Free Shipping Condition: New Location: Dearborn Heights, United States Draining applications with a high level of contamination (rust, scale etc.) require the 4024. The 4024 is impossible to block due to its powerful ball ... morevalve rotation and large orifice. The 4024 is a microprocessor operated ball valve, designed to remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers.
Buy It Now
Free Shipping Condition: New Location: Maywood, United States 1/2" Male NPT Brass Hex Head Plug Made in USA-4pcs
Buy It Now
Free Shipping Condition: New Location: Pasadena, United States 2 Female Couplers. 2 Male Couplers. Dixon AG Series. Size: 1/2 Body, 1/2" NPT Thread, Ball Valve. 2 PVC Dust Plugs. Interchangeable with ISO 7241 Series.
Buy It Now
Free Shipping Condition: New Location: United States Our brass fittings are an economical and durable solution to your piping and plumbing needs. Thread NPT 1/8" NPT Male and Female. Body Material Hardened ... moreFORGED Brass. Suitable for pressure washers, irrigation, fluid transfer, vacuum line, fuel pump, oil cooler, transmission, small and large engines, and more.
Buy It Now
Free Shipping Condition: New Location: Sacramento, United States Application: The air hose fittings can allow to transmit air, vacuum, water (No Freezing), and applicable tubes are PU, PA ,PE, PVC, etc. Size: Push in ... moreConnectors, 1/4" Tube OD x 1/8" NPT Female. Size 1/8" NPT.
Buy It Now
Free Shipping Condition: New Location: Tampa, United States Crafted from high-quality brass, this fitting ensures a secure and leak-free connection for your pneumatic system. The 1/4" NPT male thread provides compatibility ... morewith 1/4" NPT ports, while the 1/4" PTC (Push-to-Connect) end accepts your 1/4" air line with ease.
Buy It Now
$8.65 Shipping Condition: New Location: Doniphan, United States Installation Parts Supply SAME DAY SHIPPING GUARANTEED! WE DO NOT SHIP INTERNATIONALLY! U.S. ONLY! Shape: Hex Nipple(Male x Male) Connection:NPT-NPT. ... moreMaterial: 304 Stainless steel. Size: 1/2" IPS is a WHOLESALE DISTRIBUTOR of Beverage Dispensing Equipment. As well as Installation Parts and Supplies and everything you need for the complete installation. Service and repair of R.O.s! With IPS you will get the same consistency in Fittings and Service that many U.S. manufacturers have come to rely on for the manufacturing of their quality machines and Equipment for over a decade. Our goal is to ship your order today- regardless of size- 100% complete. Make IPS your single source for"Everything you need for the complete installation. Contact Information: Business hours: Mon- Fri | 7:30AM- 3:30PM PST | 541-245-3261 ALL ITEMS ARE SHIPPED WITHOUT INSURANCE! IF YOU'D LIKE TO INSURE YOUR PACKAGE PLEASE CONTACT US BEFORE PURCHASING!
Buy It Now
Free Shipping Condition: New – Open box Location: Clayton, United States Swagelok Stainless Steel Fitting Female Connector 1/4 Tube OD 1/4 NPT SS-400-7-4 Brand New See actual picture Please Note the following: JL6-2. 1. New. ... moreWill provide 20 days DOA warranty. 2. If you have any questions regarding this item. Please contact me_before_ bidding. Additional shipping discounts for multiple units are available. Expedited shipping can be arranged upon request. Other Notes of Interest S&H: Multiple items purchased will be considered for discounted shipping. Shipments: All items will ship within 1-2 business days of payment receipt. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Buy It Now
Free Shipping Condition: New Location: San Jose, United States The PMC series pneumatic male straight connector push in fitting equipped with a convenient one touch release button that provides a easy and quick tubing ... moreconnections with no special tools required. The strong nickel-plated brass threaded bodies ensure anti-corrosion.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Design for thicker wall, longer on thread and barb, to increase fitting's durability and relliability. 100% NPT gage inspection to ensure thread conformity.
Buy It Now
Free Shipping Condition: New Location: Houston, United States Quality products at affordable prices. Check out our feedbacks and buy with confidence! Parker Stainless Steel 316 Pipe Fitting. Hex Nipple, 1/2" ... moreNPT Male X 3/8" NPT Male, 1-11/16" Length Features Hex nipple pipe fitting for connecting and extending pipes Male National Pipe Taper(NPT) threads on both ends for connecting female pipes Made from stainless steel 316 for strength Higher corrosion resistance than stainless steel 304 Hexagonal shape for increased leverage and use with a wrench Shipping Weight: 2.7 ounces Item model number: 8-6 MHN-SS Details The Parker stainless steel 316 hexagonal nipple is a pipe fitting with male National Pipe Taper(NPT) threads on both ends for connecting and extending two pieces of female pipe. It has NPT threads for creating tighter seals than straight threads and is made from stainless steel 316. Which is higher strength and more corrosion resistant than stainless steel 304. The hexagonal shape allows for increased leverage during installation and disassembly with a wrench. This fitting meets standards ANSI B31.1 and B1.20.1 for quality assurance. Pipe fittings are components used for connecting. Terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules(pipe wall thickness) Parker Hannifin is a global manufacturer of motion and control technologies. Founded in 1918 as the Parker Appliance Company in Cleveland. OH, Parker Hannifin now provides precision-engineered products for many industries including aerospace, commercial, medical, mobile, and industrial manufacturing. With locations on every continent, and in 48 countries, Parker Hannifin offers a variety of solutions for flow control, filtration, and hydraulics, among many others. Terms and Conditions Shipping and Handling Free shipping to 48 continental U
Buy It Now
Free Shipping Condition: New Location: Vista, United States AIR TOOLS, PARTS & ACCESSORIES. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion. ... moreBEST PRICES. It is not disclosed to any third party in any way.
Buy It Now
Free Shipping Condition: New Location: Tempe, United States Can also be used in applications with any fluid, liquid, or gas that is compatible with brass. Connection Size: ¼” NPT. Liquid Fill Material: Glycerin. ... moreCase Material: Stainless Steel. Connection Material: Brass.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States The outside thread with sealant for better sealing. Easy Installation in tight working spaces.
Buy It Now
Free Shipping Condition: New Location: Northwood, United States
Buy It Now
Free Shipping Condition: New Location: Niagara Falls, United States [1] 1/2" NPT Hydraulic Quick Connect Male Coupler, Poppet Valve. [1] 1/2" NPT Hydraulic Quick Connect Female Coupler, Poppet Valve. 1/2" NPT Hydraulic ... moreQuick Connect Male Coupler Poppet Valve Interchange Part Numbers.
Buy It Now
Free Shipping Condition: New Location: Tempe, United States Thank you for looking: Your are bidding on 5 pieces of: 1/4 O.D. Tube x 1/8" Male NPT Swivel Elbow Nickel Plated Brass Push to Connect One Touch ... moreFitting. These rugged all metal fittings are great for applications where plastic just won't do the job. These are not rated for over the road. Or food applications. Item comes with our no questions asked warranty: If within 14 days of receipt. You want to return these for any reason, just send us a note, we will give you authorization for return. Any reason, including: Changed your mind, thought they would be bigger, or smaller. Thought they would be shinier or duller.any reason. Items must be in new/like new condition. Check out my!
Buy It Now
Free Shipping Condition: New Location: United States 1/4" OD Tube X 1/4" NPT Pneumatic Elbow Air Fitting. Type: Push To Connect Elbow. NPT Thread Sizing Info. 1/8 NPT 0.405 Roughly 3/8". 1/4 NPT 0.540 Roughly ... more1/2. 3/8 NPT 0.675 Roughly 5/8". 1/2 NPT 0.840 Roughly 7/8".
Buy It Now
Free Shipping Condition: New Location: Tempe, United States Push To Connect 1/4" O.D. Tubing x 1/4" MNPT. It is also backed by our 1 year quality warranty. If these fitting are applied in a manner consistent with ... moretheir intended use and they fail withing 1 year, we will.
Buy It Now
Free Shipping Condition: New Location: Eugene, United States 【Type】The 1/4" x 1/4" NPT brass fitting is an adapter for connecting two NPT female threaded pipes.Quantity: 6PCS. 【Application】Male NPT threads for connecting ... moreto female threaded pipes, this premium brass pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Constructed with a stainless steel body and 1/8" NPT threads. The Biggest Pressure Double the working pressure. This sensor can be used with Fuel (e85 ... morecompatible) . Material: stainless steel and plastic.
Buy It Now
Free Shipping Condition: New Location: Sagle, United States 12 Male JIC Thread 1-1/16"-12. -08 Male NPT Thread 27/32" OD 14 TPI.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Type:1/4 Od x 1/2" Npt Thread Push to Connect Fittings; Body Style: male 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ... moreductility. The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
Buy It Now
Free Shipping Condition: New Location: Lititz, United States Brand NEW items- FREE standard shipping- Easy returns NEW Banjo NIP200-SH Polypropylene Pipe Fitting Short Nipple Schedule 80 2" NPT Male 2-1/2" ... moreLength Our price $4.84 $6.95 NOW ONLY Two-day shipping only $5.95 Overnight shipping only $15.95 This Banjo NIP200-SH nipple is a close length schedule 80 polypropylene pipe fitting with 2" male NPT threads. The nipple fitting is a short length of pipe with threaded ends for connecting two threaded pipes. It has male National Pipe Taper(NPT) threads for connecting to female NPT threaded pipes. Creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch(psi) at 70 degrees F. This schedule 80(thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment. Pipe fittings are components used for connecting. Terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules(pipe wall thickness) Banjo manufactures valves. Couplings, pumps, pipe and hose fittings, and other fluid handling products for industrial applications. The company, founded in 1995, is headquartered in Crawfordsville, IN. Nipple for connecting two threaded pipes- Male NPT threads for connecting to a female NPT threaded pipe- Precision molded in sterilizable polypropylene for dimensional stability and reinforced with fiberglass for
Buy It Now
Free Shipping Condition: New Location: Pasadena, United States 2 Female Couplers. 2 Male Couplers. Dixon AG Series. Size: 1/2 Body, 1/2" NPT Thread, Ball Valve. Interchangeable with ISO 7241 Series.
Buy It Now
$13.63 Shipping Condition: New Location: Lincoln, United States This Dixon B22WB-G200 304SS Series Adapter is a high-quality fitting designed for industrial use. Its unpolished finish gives it a rugged look that matches ... moreits durability. The adapter features a female NPT connection and a weld end for easy installation. With a length of 2 inches, this fitting is perfect for use in various applications, including hydraulics, pneumatics, pumps, and plumbing. The brand of this adapter is Bradford, a renowned name in the industrial world. Get this adapter today and enhance the efficiency of your industrial processes.
Buy It Now
Free Shipping Condition: New Location: Phoenix, United States Brass body coupler and nipple prevents corrosion. Summit 1" Wet-Line / Wing Nut Couplers are designed for industrial applications that require couplings ... moreto be connected and disconnected under pressure with little to no fluid loss.
Buy It Now
Free Shipping Condition: New Location: Lincoln, United States 402-432-2520 SKU: ECO-B200 Air Compressor Pressure/ Hydraulic Gauge 2" Face Back Mount 1/4" NPT 0-200 PSI. Size: 2" Style: Back Mount Condition: ... moreNew Product Type: Pressure Gauge This is a brand new air pressure gauge. This 0-200 PSI air pressure gauge features a 2" face and 1/4" NPT back mount. This gauge can be used to measure air. Water, oil, gas, and anything else that is not corrosive to brass. This is a chrome steel gauge with chrome steel bezel. You will receive one gauge with this purchase.
Buy It Now
Free Shipping Condition: New Location: Lincoln, United States Brand new universal compressed air in line swivel connector. This fitting is constructed of solid brass and features 3/8" male and female NPT threads. ... moreThe two-piece body swivels 360° which makes it extremely easy to maneuver even in tight spaces. This connector is non-directional, which means you can have airflow in either direction.
Buy It Now
Free Shipping Condition: New Location: Lincoln, United States Industrial 0-100 PSI air pressure gauge with a 1.5" face. This gauge has 1/8" NPT male threads which come out the back of the gauge. This gauge is a top ... morequality gauge made with a black steel case and a chrome front bezel. This gauge has number markings at 0, 20, 40, 60, 80, 100 PSI.
Buy It Now
Free Shipping Condition: New Location: Lincoln, United States hese are 1/2" male NPT by 1/2" compression straight pipe connectors. This fitting connects 1/2" OD brass, bronze, copper, steel, aluminum, or iron pipe ... moreto a 1/2" female NPT outlet or fitting in a straight line.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States BRASS HOSE BARB 90 DEGREE ELBOW. RIGID MALE ADAPTER HOSE BARB ELBOW.
Buy It Now
Free Shipping Condition: New Location: Cleveland, United States The High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip. It has male NPT threads on one end and female NPT ... morethreads on the other for connecting to a female and a male threaded pipe or fitting.
Buy It Now
Free Shipping Condition: New Location: Lincoln, United States Brand new 1/4" male-to-female brass ball valve. This valve features a durable rubber-covered steel handle that opens and closes the steel ball valve as ... morewell as 1/4" Male NPT threads on one side and 1/4" female NPT threads on the other. This valve measures 2-3/8" long when open and 1-5/8" long when closed; which makes it perfect for tight spaces. This ball valve has a max working pressure of 200 PSI.
Buy It Now
Free Shipping Condition: New Location: Tampa, United States E xperience effortless connectivity between your 1/4" air line and a 1/8" NPT port with our high-quality Push To Connect Fitting. Simply insert your 1/4" ... moreair line into the fitting and enjoy a hassle-free setup.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States Size: 3/8" Barb to 3/8" Male NPT, Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
Buy It Now
Free Shipping Condition: New Location: Vail, United States Quality products at affordable prices. Check out our feedbacks and buy with confidence! Parker Stainless Steel 316 Pipe Fitting. Hex Nipple, 1/2" ... moreNPT Male X 3/8" NPT Male, 1-11/16" Length Features Hex nipple pipe fitting for connecting and extending pipes Male National Pipe Taper(NPT) threads on both ends for connecting female pipes Made from stainless steel 316 for strength Higher corrosion resistance than stainless steel 304 Hexagonal shape for increased leverage and use with a wrench Shipping Weight: 2.7 ounces Item model number: 8-6 MHN-SS Details The Parker stainless steel 316 hexagonal nipple is a pipe fitting with male National Pipe Taper(NPT) threads on both ends for connecting and extending two pieces of female pipe. It has NPT threads for creating tighter seals than straight threads and is made from stainless steel 316. Which is higher strength and more corrosion resistant than stainless steel 304. The hexagonal shape allows for increased leverage during installation and disassembly with a wrench. This fitting meets standards ANSI B31.1 and B1.20.1 for quality assurance. Pipe fittings are components used for connecting. Terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules(pipe wall thickness) Parker Hannifin is a global manufacturer of motion and control technologies. Founded in 1918 as the Parker Appliance Company in Cleveland. OH, Parker Hannifin now provides precision-engineered products for many industries including aerospace, commercial, medical, mobile, and industrial manufacturing. With locations on every continent, and in 48 countries, Parker Hannifin offers a variety of solutions for flow control, filtration, and hydraulics, among many others. Terms and Conditions Shipping and Handling Free shipping to 48 continental U
Buy It Now
Free Shipping Condition: New Location: Walnut, United States Connection: 1/2" Male NPT 1/2" Female BSPP. Material: Brass.
Buy It Now
Free Shipping Condition: New Location: San Jose, United States The PMC series pneumatic male straight connector push in fitting equipped with a convenient one touch release button that provides a easy and quick tubing ... moreconnections with no special tools required. The strong nickel-plated brass threaded bodies ensure anti-corrosion.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States Connection: 1/8 NPT Male x 1/8 NPT Female. Female Thread I.D:0.34". Male Thread O.D: 0.405". Material: Brass.
Buy It Now
$3.99 Shipping Condition: New Location: Hartland, United States 1/2" Male JIC -8 AN X 1/2" Male NPT. 90 Degree Hydraulic Fitting.
Buy It Now
Free Shipping Condition: New Location: Sagle, United States Hex Nipple 1/4" Male NPT Brass Fitting. -04 NPT Thread 17/32" OD 18 TPI. Should a problem arise with an order, we will make it right.
Buy It Now
Free Shipping Condition: New Location: Lincoln, United States Brand new 95-125 PSI air compressor pressure switch or known as a pressure control valve. This switch has four ports on the bottom, one for air inlet ... morehook up and the other three ports are usually used for a relief valve, gauges, or extra air outlets. These four ports are all 1/4" female NPT. This switch is also equipped with an on and off lever and an elbow style unloader valve on the side, which is 1/4" compression, if the unloader is not needed it does not need to be hooked up. For technical specifications please see below.
Buy It Now
Free Shipping Condition: New Location: China This NPT plugs manufactured from high quality stainless steel, they have high strength and solid construction with anti-corrosion and ant-rust, it also ... morehas enough strength to withst and the pressure of the pipeline.
Buy It Now
$37.61 Shipping Condition: New Location: Butner, United States
Buy It Now
Free Shipping Condition: New Location: Cleveland, United States JFFIT00038 2pcs 1/4" Male NPT x 1/4" Male NPT. JFFIT00039 2pcs 3/8" Male NPT x 3/8" Male NPT. JFFIT00040 2pcs 1/2" Male NPT x 1/2" Male NPT. JFFIT00047 ... more2pcs 1/8" Male NPT x 1/8" Female NPT. JFFIT00046 2pcs 1/4" Male NPT x 1/4" Female NPT.
|
|
|
|
PIPE TAPS NPT HANSON WHITNEY SIZES 3/8-18 & 1/16-27 #2000A
DESCRIPTION: PIPE TAPS NPT HANSON WHITNEY 3/8-18 1/16-27 SHARP USED ITEMS;MAY SHOW SIGNS OF USE INVENTORY#2000A IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. Please wait for an invoice prior to making a payment on multiple purchases. We try to describe every item the best that we can. Although we do have experience in the tooling industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns ... moreare accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a cashiers and company checks. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee
|
|
|
RIDGID PIPE TAP 1 1/4 "NPT #E-5118
Up for auction is a Ridgid brand pipe tap it is a 1-1/4 inch tap and does appear to be used but not abused at all it does have a few markings on the drive area but does not affect performance at all. I have offered to ship this item in a small flat rate box it just fits if I remove it from the original box if you choose a small flat rate box I will flatten the original box and send it with i really do not know if it is a big deal or not but just to let you know.
|
|
|
REBUILT PARKER PVP1630R12 HYDRAULIC PISTON PUMP 1000PSI SET 3000 PSI MAX 3/4"NPT
PARKER HYDRAULIC PISTON PUMP PVP1630R12 MAX. PRESSURE: 3000 PSI SET PRESSURE: 1000 PSI APPROX. INPUT SHAFT DIA. 3/4" APPROX. INPUT SHAFT LENGTH: 1-5/8" INLET AND OUTLET DIA. 3/4" NPT NOTICE: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEM IS REBUILT. AND UNUSED SINCE. Condition: X, REBUILT. UNUSED SINCE. NEW. In box NEW. No box NEW. Old inventory USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEM IS REBUILT. AND UNUSED SINCE. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the ... moreitem. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL,
|
|
|
BSM PUMP CORPORATION 1/2"NPT ROTARY GEAR PUMP 313-1-101
BSM PUMP CORPORATION 1/2"NPT ROTARY GEAR PUMP 313-1-101 Search BSM PUMP CORPORATION ROTARY GEAR PUMP USED CONDITION 313-1-101 1/2"NPT PORT SIZE ALL MEASUREMENTS ARE APPROX. ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION GUARANTEED NOT DOA 232 SW6 KM 4.29.13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be ... moreheld and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us wi
|
|
|
Parker Pneumatic Cylinder 1/4"NPT 1.5" Bore 5" Stroke CBC-2ATS19C Hannifin
Search our eBay Store! Parker Pneumatic Cylinder 1/4"NPT 1.5" Bore 5" Stroke CBC-2ATS19C Hannifin SKU: JV-MAT-B-CBC2ATS19C Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Parker Hannifin CBC-2ATS19C Pneumatic Cylinder 1/4"NPT 1.5" Bore 5" Stroke Model: CBC-2ATS19C Physical Condition: Good. Unit has some small scuffs and scratches and shows signs of use. We do not have the necessary resources to test this unit. Dimensions(L”W”H” 10*3*2 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. ... moreMILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfied with your purchase.please. Please, please
|
|
|
NPT Pipe Taps 3/4"-14,1/2"-14 & 3/8"-18 (3) pcs
Up for auction are these used NPT Pipe taps. This listing is for(1) 3/4"14 NPT pipe tap; 1) 1/2"14 NPT Pipe Tap and(1) 3/8"18 NPT Pipe Tap are in used condition. All threads are seem to be in goood order We will ship within 1 business day via USPS Priority Mail System when payment is cleared. Feel free to email for add'l questions or photo. Thank you for your visit.
|
|
|
Watts Fluidair F602-02BJ M5 1/4"NPT Pneumatic Filter
Watts Fluidair F602-02BJ M5 1/4"NPT Pneumatic Filter SPECIFICATION Bullseye Catalog# 29053 Weight: 1 lbs 3 oz, CONTACT INFO: Contact us Monday- Friday 8am-4pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES ... moreTAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY OR click ADD TO CAR
|
|
|
Watts Fluidair F602-04BJ M5 1/2"NPT Pneumatic Filter
Watts Fluidair F602-04BJ M5 1/2"NPT Pneumatic Filter SPECIFICATION Bullseye Catalog# 29050 Weight: 1 lbs 13 oz, CONTACT INFO: Contact us Monday- Friday 8am-4pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES ... moreTAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY OR click ADD TO CA
|
|
|
TRI-DIM FILTER CORP. 3/4"NPT FILTER 41090908 *BAG OF 15*
TRI-DIM FILTER CORP. 3/4"NPT FILTER 41090908*BAG OF 15* Search TRI-DIM FILTER CORP. BAG OF 15 FILTERS USED CONDITION 41090908 3/4"NPT ALL MEASUREMENTS ARE APPROX. ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION GUARANTEED NOT DOA 232 SW3 KM 4.29.13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you ... morewill be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 da
|
|
|
Brubaker 1"-11-1/2 NPT HSG Left-HAND USA 3S7 Tap 3-3/4" Long
Brubaker 1"11-1/2 NPT HSG Left-HAND USA 3S7 Tap 3-3/4" Long Please refer to our description(the description above this disclaimer) to find out what this item includes. Anything mentioned in ebay's pre-filled information may or may not be included with the actual item for sale. We have a retail store and our items are available for sale on ebay and locally. On occasion. An item will sell locally and on ebay before we have a chance to delete the listing. A full refund will be issued as soon as we are aware of the error. Thanks for Viewing and Good Luck! Don't forget to check out our eBay store for other great. We have an extensive inventory of tools and jewelry. As well as games and DVD's. If you are shopping for something and don't see it in our store, please feel free to ask. If you have any questions about an auction, ... moreplease ask BEFORE bidding. Combined Orders: We will be happy to combine multiple auctions and shipping charges. Please advise us if you are purchasing multiple items. We will need all eBay numbers and when we can send the final shipping charges. Please note that orders will NOT be processed for shipment on weekends and holidays. Check Outs on Friday will not be processed until the following business day. Orders will NOT be processed or shipped on the following holidays; New Year's Eve and New Year's Day, Memorial Day, July 4th, Labor Day, Thanksgiving and the Friday following Thanksgiving, Christmas Eve and Christmas Day, and Bubba's birthday. Again thanks for viewing and good luck! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Graco 3/8" npt x 3/8" npsm Ball Valve Lot of 2 - Model# 237-533
Graco 3/8" npt x 3/8" npsm Ball Valve Lot of 2- Model# 237-533 These are used in good working order. Thank You! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e57c3a6d3-0x101-
|
|
|
Ingersoll-Rand ARO Precision Pressure Regulator PR4031-200 2-60 psi 3/8" NPT
You are bidding on an excellent. Clean, working, Like New Ingersoll-Rand ARO Precision Pressure Regulator PR4031-200 Precision Regulator. Operating Pressure 2-60 PSI, NPT Port 3/8 Inch, Air Flow 14 CFM, Maximum Operating Pressure 150 PSI, Maximum Temperature 150 Degrees Fahrenheit, Length 2.12 Inches, Height 4.36 Inches, Width 2.12 Inches Item Pneumatic Regulator, Type Precision, NPT 3/8" Max. Flow 14 cfm, Max. Pressure 200 psi, Max. Temp. 150 Degrees F, Adjustment Range 2 to 60 psi, Height 4.26" Width 2.12" Length 2.12" Click Below for Additional Information/Specifications Documentation Users Manual Additional Information/ Specifications Click here to see my other eBay items Click here for my latest feedback Add me as one of your favorite sellers Buy with confidence on this great opportunity I stand behind the product ... moreI sell with full return privilege(less shipping) within 14 days. I sell quality products. Please check my feedback and other auctions. I work hard to keep it this way. FAST SHIP also! International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Payment Options: PayPal(preferred) Shipping and Handling Cost: S hipped UPS INSURED to 48 States. Alaska Hawaii and International will require additional charges. Missouri residents add 7.57% tax, May also use USPS for some shipments. International shipments: Please e-mail as to what those charges will be. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e57ec1aca-0xff-
|
|
|
OSG Exopipe 308 Series 3/8 18 NPT 4FL HSS TiN Finish Pipe Tap Taps Tools Thread
OSG Exopipe 308 Series 3/8 18 NPT 4FL HSS TiN Finish Pipe Tap Taps Tools Thread Thread Size(Inch) 3/8-18 Thread Standard NPT Material Vanadium High Speed Steel Finish/Coating TiN Number of Flutes 4 Hook Regular Projection(Decimal Inch) 0.5790 Chamfer 1 to 3-1/2 Overall Length(Inch) 3-1/8 Thread Length(Inch) 1-3/8 Shank Diameter(Decimal Inch) 0.6875 Square Size(Decimal Inch) 0.5150 Series 308 List price new from supplier $53.00 each This Tap appears to be in NEW. Never used condition- apparently the supplier's overstock. It was acquired in"as is" condition and is being sold the same"as is" see pictures for details. You are buying this item exactly as shown in the pictures. You will receive One Pipe Tap for the price shown. Please ask questions prior to making a bid* Buyer Pays Flat rate Shipping Local Pickup is always ... morean option- If you would like to pickup your item locally- send a request at the end of the auction and ask to be invoiced for local pickup. Seller will ship item within 1 days of Auction Close and provide Buyer with a confirmation of shipping. FEEDBACK: If you are unhappy for any reason. Please contact us prior to leaving any neutral or negative feedback. We strive for 100% customer satisfaction and hope you will give us the opportunity to correct any potential problems. We leave positive feedback for all customers who have completed a successful transaction with us. Returns are accepted for refund within 14 days. Buyer is responsible for return shipping costs and must contact seller prior to returning item. Returned items must be received by Seller in same condition as they were shipped in prior to refund being issued. NOTE: All item(s) being sold are in"as is" condition and exactly as shown in the pictures.
|
|
|
RIDGID 26192 Pipe Dies 2 1/2" - 4" NPT HS 1224 Set of 4
Used.RIDGID 26192 Pipe Dies 2 1/2" 4" NPT HS 1224 Set of 4(Numbered 1. 2, 3& 4) Please reference pictures. You will receive the set of 4 dies as shown. These have been used, and have no box We are a surplus warehouse and have many great parts for great prices. We are honest and as accurate as possible. If we have more than one of this particular item. You may not receive the exact one shown in the pictures, however you will receive the same model. Some parts may be dusty or have slight cosmetic imperfections. Please reference photos and email any questions as returns are not accepted. International buyers subject to international shipping fees. TS042913A4
|
|
|
BRASS Grease Cup Hit & Miss Spring Loaded1/4 inch NPT
Spring Loaded Brass Grease cup with 1/4 NPT threads. Overall Length 2 3/8" Diameter 1 3/8" Lightly marked, reasonably clean. Would polish up nicely. All threads look good and fully functional. No manufacturer stamp. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e5886916d-0xf8-
|
|
|
3 Spring Loaded Brass Grease Cups fittings Hit Miss 1/4" NPT
Quantity of 3 Brass Spring Loaded Grease Cups with 1/4" Male NPT threads. Overall length 1 5/2" Overall diameter 1 1/16" Minor scratches and some nicks. Overall a nice set.
|
|
|
Pneumatic Air Line Quick Connect Disconnect 1/2" Male Plug DQEP-5120 3/4" NPT
Used Air Line/ Tool Quick Connect Plug#DQEP-5120 Steel Male End 1/2" Body/ 3/4" NPT Female Connection Excellent Condition $2.50 Standard Shipping Anywhere USA jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13e58b0bbb7-0xff-
|
|
|
AURORA E4S-BF TURBINE PUMP 1.25" SHAFT 5/8" NPT 1.25" NO RESERVE
AURORA E4S-BF TURBINE PUMP 1.25" SHAFT 5/8" NPT 1.25" NO RESERVE Click Photos to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description AURORA TURBINE PUMP P/N: E4S-BF Aurora Turbine Pump 1.25" 5/8" shaft 1.25" NPT in& out bolt holes 3 7/16 x 5.5" This unit appears to be in good used condition. Refer to pictures for details. Bid now& $ave! We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with ... morethe assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answered as promptly as possible during business hours. However, please f eel free to call us at 1-800-800-6011. We are open Monday- Friday. 8 to 5 pm. We list new item daily so check back often We Appreciate Your Business! Payment and Shipping PAYMENT TERMS: 43386 LS3 SHIPPING TERMS: WE ONLY SHIP
|
|
|
NYE Wayne 2" NPT Pipe Threader Die Head with Ridgid 12 R Ratchet Handle
NYE Wayne 2" NPT Pipe Threader Die Head with Ridgid 12 R Ratchet Handle 2" NPT RIGHT HAND Items have markings by previous owner. See photos. Email if you have questions. This item is in good used condition and fully functional. Check our other listings for more pipe dies. Handles and reamers. If buying more than one item. Wait for invoice for combined shipping.
|
|
|
2 Pack Regal 1/2 x 1..25 D-5 NPT 4 Flute 4" Extension Taps
2 Pack Regal 1/8 x 1.25 NPT 4 Flute 4" Extension Taps. Is in great condition has minor signs of wear. Please note what is ON the package might not be what is IN them. Package is for shipping purposes. Please Read Disclaimer We obtain all items from Estate Sales. Auctions, Yard Sales and/or Consignment. We describe all items to the best of our knowledge. Payment: All payments are due 4 days after auction end unless an email is received. No emails a UPI case will be opened on the 5th day. All Indiana residents pay State Sales Tax. Shipping: We ship via USPS. If wanting Fedex or UPS an extra $5 is added to shipping. Returns: Are to be in the same condition they were received. Will not accept items that were repaired or altered before returning. Refund: Refunds are returned as they are received via PayPal minus shipping. Pictures are required ... morewhen asking for a refund. Feedback: We work hard to make our customers happy to maintain our positive feedback. All feedback is returned after feedback is received.
|
|
|
Hydraulic check valve, Rexroth S20A2.0/5, 1" NPT, 4500 PSI
Rexroth S20S2.0/5. 1" NPT Hydraulic check valve, 4500 PSI max pressure rating, 14 PSI spring. Used but in good condition, guaranteed functional.
|
|
|
American Signal Bourdon Gauge Patd '03 4 1/2" Brass steampunk 0-60PSI 1/4" NPT
Up for bid is a nice American Signal American Bourdon Gauge Patd Mar 24'03 4 1/2" 0-60 PSI brass pressure gauge. This would be perfect for your steampunk project. It has a plexiglass replacement lens for cosmetic purposes. It has a 1/4" NPT male connection. It measures 5 1/2" overall diameter. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e5b9c941b-0x106-
|
|
|
Swagelok 316 Stainless Steel Quick-Connect 1/4" Tube Fitting x 1/8" NPT
Swagelok 316 Stainless Steel Quick-Connect 1/4" Tube Fitting x 1/8" NPT
|
|
|
CONVUM 1/8" NPT VACUUM FILTERS W/ (2) FITTINGS, VF-3 *LOT OF 10*
CONVUM 1/8" NPT VACUUM FILTERS W/ 2) FITTINGS. VF-3*LOT OF 10* Search CONVUM VACUUM FILTERS W/ 2) FITTINGS USED CONDITION LOT OF 10 VF-3 1/8" NPT ITEMS SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS& FOR ADDITIONAL INFORMATION. GUARANTEED NOT D.O.A. 386. KF SW 4 04/30/13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you ... morewill be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 days
|
|
|
GARDNER DENVER 475RPM 5/8"NPT 3/8"NPT NUT RUNNER H15RG05AFFS3
GARDNER DENVER 475RPM 5/8"NPT 3/8"NPT NUT RUNNER H15RG05AFFS3 Search GARDNER DENVER NUT RUNNER USED CONDITION H15RG05AFFS3 475RPM. 5/8"NPT, 3/8"NPT PORT SIZE ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION GUARANTEED NOT DOA 232 SW3 KM 4.30.13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held ... moreand you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within
|
|
|
89438 Used- Blackmer Sliding Vane Pump, Ductile Cast Iron. 3" Inlet, 2-1/2" NPT
Used- Blackmer Sliding Vane Pump. Ductile Cast Iron. 3" Inlet, 2-1/2" NPT outlet. Rated approximately 35 gallons per minute at 100 psi at 1750 rpm. Driven by a 5hp, 3/60/230/460 volt, 1725 rpm XP motor thru a Blackmer helical reducer, ratio 3.32:1. Mounted on a carbon steel base. ref# 89438 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
89436 Used- Blackmer Pump, Ductile Cast Iron. 3" NPT inlet, 2-1/2" NPT outlet. R
Used- Blackmer Pump. Ductile Cast Iron. 3" NPT inlet, 2-1/2" NPT outlet. Rated approximately 35 gallons per minute at 100 psi at 1750 rpm. Driven by a 5hp, 3/60/230/460 volt, 1725 rpm XP motor thru a Blackmer helical reducer, ratio 3.40:1. Mounted on a carbon steel base. ref# 89436 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
88394 USED: Albin gear pump, model RBS, stainless steel. 3/4" NPT inlet/outlet.
USED: Albin gear pump. Model RBS, stainless steel. 3/4" NPT inlet/outlet. Driven by a 3/4 hp DC motor with Amicon model DC20L drive system. ref# 88394 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Ball Valves Used (Lot of 14) 3/4, 1/2, 3/8, 1/4 NPT
Ball Valves Used(Lot of 14) NPT. 2- 3/4. 9- 1/2. 1- 3/8. 2- 1/4. Powered by
|
|
|
FLEXIBLE METAL HOSE 6M42 COMBUSTIBLE GASES FLAMMABLE LIQUID 1/2IN NPT 43IN 87603
FLEXIBLE METAL HOSE 6M42 COMBUSTIBLE GASES FLAMMABLE LIQUID 1/2IN NPT 43IN 87603 ITEM: FLEXIBLE METAL HOSE COMBUSTIBLE GASES FLAMMABLE LIQUID 1/2IN NPT X 43IN LENGTH 100PSI MODEL: 6M42 LISTER: AL WEIGHT: 3lb ITEM# 87603 We accept Paypal and Credit Cards. 1. We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. 2. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. 3. We ship our items within 1 to 2 business days of receiving payment. 4. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. 5. We only ship through UPS. Collect ... moreshipping must be through your UPS account. 6. If the item is to be shipped on a skid please contact us for a Competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your ebay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. 7. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 1. Bid with confidence. We put customer satisfaction as our#1 priority. We are always willing to resolve issues and offer hassle-free refunds! 2. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. 3. If you receive an item that is dead on arrival. We will refund 100%
|
|
|
Lubriquip 540-800-091 Meterflo Hydraulic Pump 1/2" NPT Ports CCW Buna-N
Questions? Call us: 1-877-328-9236. Lubriquip 540-800-091 Meterflo Hydraulic Pump 1/2" NPT Ports CCW Buna-N. Manufacturer: Lubriquip Model: 540-800-091 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Lubriquip Condition: Used. Comes in non-original packaging. This pump is in good condition with a few very minor scuffs and scratches from normal use. But nothing major or anything that would affect function. Notes: This pump was removed from a working system that was being decommissioned. But was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Lubriquip 540-800-091 Meterflo Hydraulic Pump, Specifications: Manufacturer: Lubriquip, Model: 540-800-091, Description: Meterflo Hydraulic Pump, Rotation: Counter Clock-Wise(CCW) ... moreInlet/Outlet Ports: 1/2" Female NPT, Seal Material: Buna-N, Weight: 5.65 lbs. Condition: Used, Quantity: 1, SKU: N07P025 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us befo
|
|
|
2X NORGREN R07-100-RNKA RELIEVING AIR PRESSURE REGULATOR 1/8IN NPT VALVE 87494
2X NORGREN R07-100-RNKA RELIEVING AIR PRESSURE REGULATOR 1/8IN NPT VALVE 87494 ITEM: LOT OF 2 NORGREN RELIEVING AIR PRESSURE REGULATOR 1/8IN NPT VALVE GAUGE 100PSI 300PSIG MAX 150F MODEL: R07-100-RNKA LISTER: AL WEIGHT: 1lb ITEM# 87494 We accept Paypal and Credit Cards. 1. We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. 2. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. 3. We ship our items within 1 to 2 business days of receiving payment. 4. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. 5. We only ship ... morethrough UPS. Collect shipping must be through your UPS account. 6. If the item is to be shipped on a skid please contact us for a Competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your ebay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. 7. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 1. Bid with confidence. We put customer satisfaction as our#1 priority. We are always willing to resolve issues and offer hassle-free refunds! 2. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. 3. If you receive an item that is dead on arrival. We w
|
|
|
NORGREN 11-042-007 3/4IN NPT PILOT OPERATED REGULATOR 400PSIG INLET OUTLET 87486
NORGREN 11-042-007 3/4IN NPT PILOT OPERATED REGULATOR 400PSIG INLET OUTLET 87486 ITEM: NORGREN 3/4IN NPT PILOT OPERATED REGULATOR 400PSIG INLET OUTLET 200PSIG ATOMUFFLER 07 175F 80DEG C MODEL: 11-042-007 LISTER: AL WEIGHT: 6lb ITEM# 87486 We accept Paypal and Credit Cards. 1. We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. 2. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. 3. We ship our items within 1 to 2 business days of receiving payment. 4. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. 5. We only ... moreship through UPS. Collect shipping must be through your UPS account. 6. If the item is to be shipped on a skid please contact us for a Competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your ebay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. 7. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 1. Bid with confidence. We put customer satisfaction as our#1 priority. We are always willing to resolve issues and offer hassle-free refunds! 2. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. 3. If you receive an item that is dead on arrival. W
|
|
|
Gemini PNEUMATIC/ AIR HOG CLAMP /CRIMPER/ CRIMPING TOOL, 1/4" NPT- Last item
Gemini PNEUMATIC/AIR HOG CLAMP/ CRIMPER/ CRIMPING TOOL. 1/4" NPT Item Condition: Used. Tested works. Made in U.S.A. 1pc avai lable out of 2pcs. This unit is last one we carry.
|
|
|
Norgren L12-400-MPLA Pressure Regulator ½” NPT 150 PSA
TR Loc: PRU-573 Posted: DS USED Norgren L12-400-MPLA Pressure Regulator ½” NPT 150 PSA P/N: L12-400-MPLA Norgren Pressure Regulator ½” NPT Inlet: 150 PSIG Temp: 125ºF Pictures are of the actual unit. Condition Good used condition Please review pictures and request additional info. If required. before bidding. Approx. Shipping Dims 8 x 6 x 6 Wt: 2 lbs We’ve supplied pic’s for your inspection and review. Call or email with questions or additional info. Contact Info Toll Road Truck and Trailer 841 North Bedford Street East Bridgewater. MA 02333 Office: 508-378-3931 Fax: 508-378-3366 SHIPPING DETAILS All items sold are shipped FOB our East Bridgewater. MA location, unless otherwise noted. The actual shipping cost to be determined and calculated based on your location. Since each item's and each customer's shipping needs ... moreare unique, shipping costs and methods will vary by item and customer. Shipping details will be configured at time of purchase and verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code here is 02333. TERMS All items are sold“AS-IS. WHERE-IS” Items are described to the best of our knowledge, however, we(Toll Road Truck and Trailer and/or the SELLER) make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. All sales are final. Buyer is responsible for actual shipping unless otherwise noted. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. FEEBACK We do our best to describe each item the best that we can. We strive to maintain a high feedback score and we are always willing to work with you on any problem. So please contact us before you resort to leaving negative feedback.
|
|
|
Used...Trerice Pressure Gauge Item # D00111 (52-2197) Model 500XB 4.5" 1/4"NPT
Used. Trerice Pressure Gauge Part# D00111 Model: 500XB 4.5" 1/4" NPT 52-2197 Range: 0/30 psi Please see picture's for more detail's. We are a surplus warehouse and have many great parts for great prices. We are honest and as accurate as possible. If we have more than one of this particular item. You may not receive the exact one shown in the pictures, however you will receive the same model. Some parts may be dusty or have slight cosmetic imperfections. Please reference photos and email any questions as returns are not accepted. International buyers subject to international shipping fees. Thank You LVG043013L4
|
|
|
PARKER 07E31A13AC PNEUMATIC REGULATOR 150PSI 1/2IN NPT 88752
PARKER 07E31A13AC PNEUMATIC REGULATOR 150PSI 1/2IN NPT 88752 ITEM: PARKER PNEUMATIC REGULATOR 150PSI 1/2IN NPT*MISSING LUBRICATOR* MODEL: 07E31A13AC LISTER: AL WEIGHT: 3lb ITEM# 88752 We accept Paypal and Credit Cards. 1. We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. 2. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. 3. We ship our items within 1 to 2 business days of receiving payment. 4. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. 5. We only ship through UPS. Collect shipping must be through your ... moreUPS account. 6. If the item is to be shipped on a skid please contact us for a Competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your ebay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. 7. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 1. Bid with confidence. We put customer satisfaction as our#1 priority. We are always willing to resolve issues and offer hassle-free refunds! 2. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. 3. If you receive an item that is dead on arrival. We will refund 100% of your purchase price including shi
|
|
|
2 PNEUMATIC GRINDERS, INGERSOLL-RAND, CLECO, 1/4" & 3/8" NPT
Inventory Number: 12090045181 Manufacturer: Description: 2 PNEUMATIC GRINDERS. INGERSOLL-RAND, CLECO, 1/4" 3/8" NPT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: INGERSOLL-RAND, 1/4" NPT, RPM UNKNOWN, ONE: CLECO, 3/8" NPT, 6000 RPM, BOTH TESTED& WORK, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax ... moreand you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information
|
|
|
Wilkerson F18-03-SL00 Pneumatic Air Filter 1/2"NPT Ports
Wilkerson F18-03-SL00 Pneumatic Air Filter 1/2"NPT Ports SPECIFICATION Bullseye Catalog# 30322 Weight: 1 lbs 14 oz, CONTACT INFO: Contact us Monday- Friday 8am-4pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA ... moreSALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY OR click ADD T
|
|
|
Lot of 10 Used Hose Barb Fittings 3/4 Male NPT X 3/4 Hose
Lot of 10 used 3/4 Male NPT X 3/4 Hose Barb fittings. These are used fittings in good shape. Threads look good but dried pipe dope needs to be cleaned off. I'll answer questions as soon as possible but I'm only online a few hours a day. Will be shipped in a small Priority flat rate box.
|
|
|
TRW 1/8" NPT DIE HEAD THREAD CHASERS 3/4" D milled Projection Style
These are for a 3/4" D. Milled with 45 chamfer, 10 deg face grind. Slightly used condition di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13e62daf9d9-0xf0-
|
|
|
SMC 3/8" NPT 7-120 PSI 140°F FILTER REGULATOR W/ GAUGE, NAW2000
SMC 3/8" NPT 7-120 PSI 140°F FILTER REGULATOR W/ GAUGE. NAW2000 Search SMC FILTER REGULATOR W/ GAUGE USED CONDITION NAW2000 3/8" NPT 7-120 PSI 140°F ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS& FOR ADDITIONAL INFORMATION. GUARANTEED NOT D.O.A. 387. KF SW 4 05/01/13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held ... moreand you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us wit
|
|
|
SMC 1/8" NPT 0.05-0.85MPA 140°F MODULAR FILTER REGULATOR W/ GAUGE, AW2000-01BG-C
SMC 1/8" NPT 0.05-0.85MPA 140°F MODULAR FILTER REGULATOR W/ GAUGE. AW2000-01BG-C Search SMC MODULAR FILTER REGULATOR W/ GAUGE USED CONDITION AW2000-N01BG-C 1/8" NPT 0.05-0.85MPa(145 PSI) 140°F ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS& FOR ADDITIONAL INFORMATION. GUARANTEED NOT D.O.A. 387. KF SW 4 05/01/13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant ... moreincrease in shipping your order will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you recei
|
|
|
SMC 1/8" NPT 0.05-0.85MPA (145 PSI) 140°F FILTER REGULATOR, NAW2000-N01-C
SMC 1/8" NPT 0.05-0.85MPA(145 PSI) 140°F FILTER REGULATOR. NAW2000-N01-C Search SMC FILTER REGULATOR USED CONDITION NAW2000-N01-C 1/8" NPT 0.05-0.85MPa(145 PSI) 140°F ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS& FOR ADDITIONAL INFORMATION. GUARANTEED NOT D.O.A. 387. KF SW 4 05/01/13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your ... moreorder will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. pl
|
|
|
Lot 2 Used Ridgid 811A & 815A Universal NPT Die Head W/Dies Stainless 1/4-3/4
In this auction the winning bidder will receive the following. 1- Ridgid 811A Universal Pipe Die Head Receiver with 1/2"3/4" SS NPT Dies Installed. Fo r use w/Stain less Steel Pipe 1- Ridgid 815A Universal Pipe Die Head Receiver 1/4"3/8" SS NPT Dies Installed. For use w/ Stainless Steel Pipe These heads are in excellent used condit ion with only minor scratche s dings etc. These die heads are for use in R idgid Pipe and Bolt Automatic Threading Machines. Winning bidder will also receive 2 sets of High Speed NPT Universal Dies Installed in heads. 1- Ridgid 4 piece die for 1/4"3/8" Stainless Steel NPT 1- Ridgid 4 piece die for 1/2"3/4" Stainless Steel NPT All Items received are Used but fully functional and 100% working condition. Retail Value new is over $1250 S/H is $30 For UPS Ground and Please allow ... more3 business days for shipment. Entire Lot is sold with a money back refund minus S/H. Bid with confidence and email me with any questions.
|
|
|
Brown & Sharpe B&S No.2 Gear pump 1/2"NPT 5/8"Shaft
Brown& Sharpe B&S No.2 Gear pump 1/2"NPT 5/8"Shaft SPECIFICATION Bullseye Catalog# 30300 Weight: 10 lbs, CONTACT INFO: Contact us Monday- Friday 8am-4pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA ... moreSALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY OR click ADD T
|
|
|
IFM PB5224 PRESSURE SWITCH LIQ/GAS 0-100PSI 1/4IN NPT USED
IFM PB5224 PRESSURE SWITCH LIQ/GAS 0-100PSI 1/4IN NPT USED USED SURPLUS ITEM_
|
|
|
Precise Sensors 3243-100-01-GA-4IM-P6 1/4"-NPT Pressure Transducer 0-100PSIA
Search our eBay Store! Precise Sensors 3243-100-01-GA-4IM-P6 1/4"NPT Pressure Transducer 0-100PSIA SKU: JV-DAN-A-PRECENS3243 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Precise Sensors 3243-100-01-GA-4IM-P6 1/4”NPT Pressure Transducer 0-100PSIA 12-30VDC P/N: 3243-100-01-GA-4IM-P6. Physical Condition: Unit is in good condition. Minor cosmetic scuffs/scratches from shipping and handling. Slight signs of previous use. Port is in good condition. Terminal/Sensor in good condition. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Dimensions(L" x ... moreW" x H" 1 1/8 x 2 ¼ x 3 ¼ PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don'
|
|
|
RAMPF DOSIERTECHNIK 66605J-HV DIAPHRAGM PUMP SIZE 1/2IN NPT 84094
RAMPF DOSIERTECHNIK 66605J-HV DIAPHRAGM PUMP SIZE 1/2IN NPT 84094 ITEM: RAMPF DOSIERTECHNIK DIAPHRAGM PUMP SIZE 1/2IN NPT MODEL: 66605J-HV LISTER: AL WEIGHT: 7lb ITEM# 84094 We accept Paypal and Credit Cards. 1. We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. 2. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. 3. We ship our items within 1 to 2 business days of receiving payment. 4. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. 5. We only ship through UPS. Collect shipping must be through your UPS account. ... more6. If the item is to be shipped on a skid please contact us for a Competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your ebay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. 7. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 1. Bid with confidence. We put customer satisfaction as our#1 priority. We are always willing to resolve issues and offer hassle-free refunds! 2. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. 3. If you receive an item that is dead on arrival. We will refund 100% of your purchase price including shipping cost
|
|
|
MOYNO MOTOR TYPE CSF FRAME 2M2 ROTATING CAVITY 21IN PUMP 3/4X3/4IN NPT 83602
MOYNO MOTOR TYPE CSF FRAME 2M2 ROTATING CAVITY 21IN PUMP 3/4X3/4IN NPT 83602 ITEM: MOYNO MOTOR ROTATING CAVITY 21IN PUMP 3/4X3/4IN NPT SHAFT DIA PROGRESSIVE MODEL: TYPE CSF FRAME 2M2 LISTER: AL WEIGHT: 50lb ITEM# 83602 We accept Paypal and Credit Cards. 1. We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. 2. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. 3. We ship our items within 1 to 2 business days of receiving payment. 4. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. 5. We only ship through UPS. Collect ... moreshipping must be through your UPS account. 6. If the item is to be shipped on a skid please contact us for a Competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your ebay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. 7. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 1. Bid with confidence. We put customer satisfaction as our#1 priority. We are always willing to resolve issues and offer hassle-free refunds! 2. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. 3. If you receive an item that is dead on arrival. We will refund 100% o
|
|
|
85206 Used- Kirst Centrifugal Pump, Type 9 HA, 316 Stainless Steel. 2-1/2" NPT i
Used- Kirst Centrifugal Pump. Type 9 HA, 316 Stainless Steel. 2-1/2" NPT inlet/outlet. Rated approximately 100 gallons per minute. Driven by a 3 HP, 3/60/208-230/460 Volt, 1725 RPM motor. Mounted on a cart with casters. ref# 85206 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
VALWORX 521124-SR 16 3" NPT Bronze 30-145PSI 120V ball valve U
Discount Industrial Equipment& Supplies, | | | | | | | | | | | | CLICK ON PICTURE TO CHANGE VIEW. PRODUCT DESCRIPTION, IAR Stock# 2485 Condition Used-Excellent. Qty of Lots 1 Items In Lot 1. Location 1360. VALWORX 521124-SR 16 3 NPT Bronze 30-145PSI 120V ball valve U Make: VALWORX. Model: 521124-SR. SPECIFICATIONS- See Tech Spec tab for more details. Fig# 16. Pipe Size: 3. Connection: NPT. Material: Bronze. PSI: 30-145. Wafer Mtl* 316SS. Volts: 120. Weight(Lbs) 26. Shipping dimensions(L in) 16(W in) 10(H in) 7. Calculated Shipping Tech Spec VALWORX 521124-SR 30-145 PSI AIR ACTUATED 3' BALL VALVE. Compliance Compliance. VALWORX 521124-SR 16 3" NPT Bronze 30-145PSI 120V ball valve U 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e6410c40f-0x101-
|
|
|
Lot of 9 SC Mech Solutions Male Elbow Fitting 45 DEG 1/2" NPT-Tube Scavenger P1
Male Elbow Fittings Location: C 0406 Specs Part Number: 133528 Description Here is a lot of nine SC Mech Solutions male 45 deg. elbow fittings. They are new in packaging as pictured. They are guaranteed to arrive as stated with a 14 day right of return. Shipping Feel free to e-mail us at motionconstrained@gmail.com if you have any questions. Shipping quotes are available under the shipping tab. free customisable galleries from
|
|
|
Brass Tap 3/4" X 14 NPT High Speed Steel
Excellent shape. Brass tap 3/4" X 14 NPT F H-5 buy with confidence. Ships USA.
|
|
|
HANSON WHITNEY ( 2"11-1/2 NPT HS G) TAPER PIPE TAP
HANSON WHITNEY( 2"11-1/2 NPT HS G) TAPER PIPE TAP#60191 Tap is in great condition! Except it has broken 1/2 of teeth on one side. But it should still work flawlessly when cutting.
|
|
|
BENTLEY 1-11-1/2 NPT TAPER PIPE TAP 5 FLUTE 1" SIZE MADE IN USA
BENTLEY 1-11-1/2 NPT TAPER PIPE TAP 5 FLUTE 1" SIZE MADE IN USA Click Images to Enlarge Item Description Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 BENTLEY 1-11- 1/2" PIPE TAP Model: 1-11-1/2 NPT Type: Taper Pipe Tap Flute: 5 Size: 1" Made in USA This item appears to be in good used condition. Refer to pictures for details. New, this item would cost over $60.00 each! Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to ... morethe best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answered as promptly as possible during business hours. However, please f eel free to call us at 1-800-800-6011. We are open Monday- Friday. 8 to 5 pm. We list new item daily so check back often We Appreciate Your Business! Shipping& Payment STOCK# 39079 LS2 3/2013
|
|
|
3/4" - 14 NPT tap Pipe pair
Both taps only slightly used. One is un-modofied and appears to have only a tiny bit of aluminum only lightly galled on a couple of the its cutting edges. Indicating only light use. The other is modified by having the end ground all the way back beyond the grinding center. Which would be great for bottom tapping or chasing threads. All leading edges crisp and clean. No chips. Perfect for the job on a budget. Where you only need to tap a few holes and cannot justify the cost of a brand new tap. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13e649ff5f4-0xfa-
|
|
|
1" - 11-1/2 NPT tap Pipe Tap modofied
Only slightly used. Modified by having the end ground all the way back beyond the grinding center. Great for bottom tapping or chasing threads. Perfect for the job on a budget. Where you only need to tap a few holes and cannot justify the cost of a brand new tap. Slight surface corrosion. Crisp cutting edges. I polished only the shank so you could see/ read it. Didn't touch the cutting edges at all.
|
|
|
Cashco 3/4" NPT D CS/CS/S2N Regulator
CONDITION: Used. No box. Removed from functioning system; may show signs of use and/or shelf ware. Please view pictures closely. What you see in the photos is what the buyer will receive. Manufacturer: Cashco Type: Regulator Model# 3/4" NPT D CS/CS/S2N Range: 2-15 PSIG Inlet Rating: 300 PSIG CWP 300/180F Outlet Rating: 150 PSIG CWP 150/180F Customer Service We deal primarily in new and used industrial equipment and electronic controls; however. We also buy and sell many other types of products. We do not always identify all specifications within the product descriptions. To ensure accuracy of what you are purchasing we do not use stock photos and we include close ups of the label whenever possible. Please do not hesitate to contact us if you have any questions or if you need additional photos PRIOR to purchasing an item. We can be reached ... moreat goldenservices3@yahoo.com or you can contact customer service at(740) 506-4630. We are open 8:00 AM to 5:00 PM Eastern Standard Time. We will do our best to answer your questions. However, if your question is of a technical nature or if you are wondering if the item listed will work with equipment you already own, please contact the manufacturer. They will be able to give you the most complete information about the item in question. Our store policies including the terms of sale. Shipping and returns are located at the top of the home page of our store http:stores.ebay.com/golden-services-3. We try to maintain a high feedback score and we are always willing to work with you on any problem. Please contact us before you resort to leaving negative feedback. Thank you for shopping with Golden Services 3! Powered by
|
|
|
USED PLAST-O-MATIC REGULATOR MODEL PRH100V-PV-PF 1" NPT 30 TO 125 PSI NO RES
USED PLAST-O-MATIC 1" REGULATOR. MODEL PRH100V-PV-PF. NICE HOUSING WITH ONLY MINOR MARKS FROM NORMAL USE. ADJUSTS FROM 30 TO 125 PSI. NO RESERVE NO HANDLING CHARGE AND $15 USPS PRIORITY MAIL SHIPPING I ONLY ACCEPT PAYPAL
|
|
|
Lot Of 21 POCO Edm-3 Orbit Taps 1/2-14 NPT
Lot Of 21 POCO Edm-3 Orbit Taps 1/2-14 NPT The Taps I am selling are used. I would assume that they have markings and/or engravings on the units themselves from their previous owner. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us with any questions or concerns. We do out best to ship quickly. But never at the expense of quality delivery. RETURN POLICY: This sale is being sold as-is. Where-is. There are no warrants, nor certificates of calibration. It is necessary, these ... moreunits are calibrated prior to being introduced into production. The auction description is written as a guide, we strongly recommened that you come view and test the units at our facility. We will help answer any questions that you may have, before you purchase an item.
|
|
|
Lot Of 18 POCO Edm-3 Orbit Taps 1/4-18 NPT
Lot Of 18 POCO Edm-3 Orbit Taps 1/4-18 NPT The Taps I am selling are used. I would assume that they have markings and/or engravings on the units themselves from their previous owner. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us with any questions or concerns. We do out best to ship quickly. But never at the expense of quality delivery. RETURN POLICY: This sale is being sold as-is. Where-is. There are no warrants, nor certificates of calibration. It is necessary, these ... moreunits are calibrated prior to being introduced into production. The auction description is written as a guide, we strongly recommened that you come view and test the units at our facility. We will help answer any questions that you may have, before you purchase an item.
|
|
|
Lot Of 6 POCO Edm-3 Orbit Taps 1/8-27 NPT
Lot Of 6 POCO Edm-3 Orbit Taps 1/8-27 NPT The Orbit Taps I am selling are used. I would assume that they have markings and/or engravings on the units themselves from their previous owner. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us with any questions or concerns. We do out best to ship quickly. But never at the expense of quality delivery. RETURN POLICY: This sale is being sold as-is. Where-is. There are no warrants, nor certificates of calibration. It is necessary, these ... moreunits are calibrated prior to being introduced into production. The auction description is written as a guide, we strongly recommened that you come view and test the units at our facility. We will help answer any questions that you may have, before you purchase an item.
|
|
|
GEOMETRIC 3/8-NPT THREAD CHASERS FIT 1"D HEAD
GEOMETRIC THREAD CHASERS FIT 1"D HEAD SIZE 3/8-NPT SET OF FOUR Please ask any questions before purchasing Pay pal only please 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e67594834-0x100-
|
|
|
ACE 2"11-1/2 NPT TAPER PIPE TAP MACHINIST TOOL MADE IN USA LQQK!
UP FOR AUCTION IS THIS 2' 11-1/2 NPT TAP.IN EXCELLENT CONDITION.NO CHIPPED TEETH ACE. MADE IN USA. 6 FLUTES. 4-1/2' O.A.L.
|
|
|
Winter NPT Tap 1 1/2" X 11 1/2
An Winter NPT Pipe Thread Tap. Not New, but Has Never Been Used. Sitting in a Toolbox Unused for a Long Time. The Base is Oxidized on half of one side. The Cutting Edge is Super Sharp and has never been utilized At All!
|
|
|
TAP 1-1/2-11-1/2 HSS NPT PIPE 6 FLUTE
TAP 1-1/2-11 NPT MADE IN USA 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13e67d7d935-0xf4-
|
|
|
USED...FISHER PRESSURE GAUGE, DUAL RANGE 0 - 60 PSI/ 0 - 4 BAR, 1/4" NPT
USED.FISHER PRESSURE GAUGE. DUAL RANGE 0- 60 PSI/ 0- 4 BAR, 1/4" NPT CONNECTION: CENTER BACK PLEASE REFERENCE PICTURES AND EMAIL ANY QUESTIONS AS WE DO NOT ACCEPT RETURNS. THANK YOU. We are a surplus warehouse and have many great parts for great prices. We are honest and as accurate as possible. You will receive exactly what is in the photos. Some parts may be dusty or have slight cosmetic imperfections. Please reference photos and email any questions as returns are not accepted. International buyers subject to international shipping fees. JT050213K1
|
|
|
Hydraulic ball valves Apollo 3/4" NPT 2000 PSI WOG steel LOT OF 4 VALVES
Apollo 3/4" NPT steel ball valves. LOT OF 4 VALVES. 2000 PSI WOG. Used. one valve has small hammer marks. Others are in good condition. 08-046)
|
|
|
Ridgid Geared Threader No. 141, 2-1/2" to 4" NPT Pipe, 8 Threads Per Inch
This is a Ridgid geared pipe threader. Can thread 2-1/2" to 4" NPT pipe. Model number: 141 Serial number: 461349 Overall dimensions: 13.5" x 14" x 15" Shipping listed as"local pickup only" However, we will provide a shipping quote upon request. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The ... morecost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks a
|
|
|
(3) RIDGID 3/8-00R NPT DIE HEADS W/ DIES & NEW RATCHET
3) RIDGID 3/8-00R NPT DIE HEADS WITH DIES AND NEW RATCHET(3) 3/8"00R NPT DIE HEADS W/ DIES#36885 DIE HEADS AND DIES ARE IN VERY GOOD USED CONDITION RATCHET AND HANDLE ARE NEW RATCHET CAT. 38540
|
|
|
Parker Veriflo 930Y2NC/NCSLS07148 High Purity Manifold Valve 3-Port 1/4" NPT
Search our eBay Store! Parker Veriflo 930Y2NC/NCSLS07148 High Purity Manifold Valve 3-Port 1/4" NPT SKU: JV-RAN-B-PV930Y2NC Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Parker Veriflo 930Y2NC/NCSLS07148 High Purity Manifold Valve 3-Port 1/4" NPT Model: 930Y2NC/NCSLS07148 P/N: 54012096 Physical Condition: Good. Minor scuffing from usage/handling. Dimensions(L" x W" x H" 4.5 x 2.25 x 3.5 Manufacturer's Description(for informational purposes only) The Parker Veriflo 930Y is a high purity diaphragm valve manifold. Engineered to meet the specific requirements ... moreof semiconductor OEM tool manufacturers. The 930Y is designed for space savings and with fewer welds, and low internal volume components; making this valve manifold ideal for process control and purge systems. Ideal for valve manifold boxes High cycle life Internally threadless and springless Fully functional under vacuum conditions PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research onl
|
|
|
Dura Gauge 0-60 psi 6" Face 1/4" NPT Brass Threads
Dura Gauge 0-60 psi 6" Face 1/4" NPT Brass Threads bin 216 Up for auction is this used 0-60 psi gauge with 1/4" npt brass threads. Measures 6" across the gauge face and 7 1/2" across back. I have not tried it but looks ok. If you have any questions please ask. My auctions end nightly between 8:00 and 8:30 PM eastern time. Check my other listings while you're here. I will be listing many parts and farm related items over the winter months so check back often or add me to your favorites list. Thanks for looking. PAYMENT: You have up to 7 days to pay thru PAYPAL. If you would like to pickup an item cash will be excepted but will need payment within 1 week.
|
|
|
Dura Gauge 0-160 psi 6" Face 1/4" NPT Brass Threads
Dura Gauge 0-160 psi 6" Face 1/4" NPT Brass Threads bin 216 Up for auction is this used 0-160 psi gauge with 1/4" npt brass threads. Measures 6" across the gauge face and 7 1/2" across back. I have not tried it but looks ok. If you have any questions please ask. My auctions end nightly between 8:00 and 8:30 PM eastern time. Check my other listings while you're here. I will be listing many parts and farm related items over the winter months so check back often or add me to your favorites list. Thanks for looking. PAYMENT: You have up to 7 days to pay thru PAYPAL. If you would like to pickup an item cash will be excepted but will need payment within 1 week.
|
|
|
DIE HANDLE W/ 7 ROUND THREADING DIES - 1/2"-14 NPT to 1"-14 NF
aims DIE HANDLE W/ 7 ROUND THREADING DIES- 1/2"14 NPT to 1"14 NF read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Die Handle with 7 Round Threading Dies in good condition. Specifications: Handle Length: 15-3/4" Die Diameters: 2" Die Sizes Range: 1/2"14 NPT to 1"14 NF. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DIE HANDLE W/ 7 ROUND THREADING DIES- 1/2"14 NPT to 1"14 NF Reliable Tool Inc. c 2011 | Powered by
|
|
|
1/2 Ridgid Pipe Threader NPT Good dies Model 500
1/2 Ridgid Threader Good dies Model 500 Payment is expected within 24 hrs of the winning bid
|
|
|
91698 Used, Norgen B08-296M3MA Filter/Regulator, 1/4" NPT
91698 Used. Norgen B08-296M3MA Filter/Regulator, 1/4" NPT, Inlet 250 PSIG Max, Outlet 150 PSIG Max. Item shows signs of having been used- actual working function unknown. Austin Surplus SKU: 91698 Location: GRG-R05-P02-S03-0004282
|
|
|
MOORE 41-15 PRESSURE REGULATOR 0.5-15PSI 1/8IN NPT 200422
Brand: MOORE Condition: Used Model: 41-15 Pressure Range: 0.5-15 PSI Fitting Size: 1/8 IN Weight: 2 lbs Dimensions: 6 X 4 X 4 SKU: 200422 Additional Notes:
|
|
|
RIDGID OOR 00R 1/4" NPT RATCHET PIPE THREADER DIE HEAD OLD STYLE COMPLETE USED
YOU ARE BUYING A USED RIDGID OO R 00R 1/ 4" NPT RATCHET PIPE THREADER DIE HEAD OLD STYLE COMPLETE WITH DIES. THE DIE IS IN GOOD USABLE CONDITION AND WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
|
|
|
RIDGID OOR 00R 3/4" NPT RATCHET PIPE THREADER DIE HEAD OLD STYLE COMPLETE USED
YOU ARE BUYING A USED RIDGID OO R 00R 3/4" NPT RATCHET PIPE THREADER DIE HEAD OLD STYLE COMPLETE WITH DIES. THE DIE IS IN GOOD USABLE CONDITION AND WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
|
|
|
RIDGID 12-R 12R 1-1/4" NPT RATCHET PIPE THREADER DIE HEAD OLD STYLE COMPLETE
YOU ARE BUYING A USED RIDGID 12R 1-1/ 4" NPT RATCHET PIPE THREADER DIE HEAD OLD STYLE COMPLETE WITH DIES. THE DIE IS IN GOOD USABLE CONDITION AND WILL COME AS PICTURED. SHIPPING WILL BE $9.50 TO THE LOWER 48 STATES. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e6a244cf1-0x102-
|
|
|
RIDGID 12-R 12R 3/4" NPT RATCHET PIPE THREADER DIE HEAD NEW STYLE COMPLETE USED
YOU ARE BUYING A USED RIDGID 12R 3/4" NPT RATCHET PIPE THREADER DIE HEAD NEW STYLE COMPLETE WITH DIES. THE DIE IS IN GOOD USED CONDITION AND WILL COME AS PICTURED. SHIPPING WILL BE $9.50 TO THE LOWER 48 STATES.
|
|
|
RIDGID 12-R 12R 2" NPT HS RATCHET PIPE THREADER DIE HEAD NEW STYLE COMPLETE USED
YOU ARE BUYING A USED RIDGID 12R 2" NPT HS RATCHET PIPE THREADER DIE HEAD NEW STYLE COMPLETE WITH DIES. THE DIE IS IN GOOD USED CONDITION AND WILL COME AS PICTURED. SHIPPING WILL BE $9.50 TO THE LOWER 48 STATES. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13e6a244bf7-0xfb-
|
|
|
USED RIDGID 1/2"-3/4" NPT 554 H.S. PIPE DIES
USED RIDGID 1/2" 3/4" NPT 554 H.S. DIES. NOT SURE WHAT THESE FIT. THEY LOOK NEW BUT AM SELLING AS USED. EMAIL WITH QUEST IONS.
|
|
|
HONEYWELL C645A 10061 AIR GAS PRESSURE SWITCH 1/4IN NPT 84373
HONEYWELL C645A 10061 AIR GAS PRESSURE SWITCH 1/4IN NPT 84373 ITEM: HONEYWELL AIR GAS PRESSURE SWITCH 1/4IN NPT MODEL: C645A 10061 LISTER: AL WEIGHT: 2lb ITEM# 84373 We accept Paypal and Credit Cards. 1. We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. 2. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. 3. We ship our items within 1 to 2 business days of receiving payment. 4. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. 5. We only ship through UPS. Collect shipping must be through your UPS account. 6. If ... morethe item is to be shipped on a skid please contact us for a Competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your ebay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. 7. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 1. Bid with confidence. We put customer satisfaction as our#1 priority. We are always willing to resolve issues and offer hassle-free refunds! 2. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. 3. If you receive an item that is dead on arrival. We will refund 100% of your purchase price including shipping costs for ON
|
|
|
4 PNEUMATIC DRILLS, SIOUX, STANLEY, 0-5/8" CAPACITY, 1/4" & 3/8" NPT
Inventory Number: 12090045184 Manufacturer: Description: 4 PNEUMATIC DRILLS. SIOUX, STANLEY, 0-5/8" CAPACITY, 1/4" 3/8" NPT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: UNKNOWN MAKER) 0-5/8" CAPACITY, 1/4" NPT, ONE: SIOUX, 1/16"3/8" CAPACITY, 1/4" NPT, ONE: STANLEY, 0-5/16" CAPACITY, 3/8" NPT, ONE: SIOUX, 0- 5/16" CAPACITY, 1/4" NPT, ALL TESTED& WORK, RPM UNKNOWN, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, ... moreOH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refun
|
|
|
Nupro B-4TF2 Filter, 90 Micron, 1/4 NPT
Nupro B-4TF2 Filter. 90 Micron, 1/4 NPT Search For sale is one used Nupro filter. It came out of a new panel that was installed but never brought on line. If you need more information please ask. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e6ad2f4c5-0x102-
|
|
|
Nupro Relief Valve, 350-600 PSI, 1/4 NPT, Lot of 2
Nupro Relief Valve. 350-600 PSI, 1/4 NPT, Lot of 2 Search For sale is one lot of 2 used Nupro relief valves. There are 3 lots available. If you want more than 1 please notify me before you pay and I will send you an updated invoice. If you need more information please ask.
|
|
|
Brass Connectors, 1/8 NPT x 1/8 Barbed, 90 Degree, Lot of 4
Brass Connectors. 1/8 NPT x 1/8 Barbed, 90 Degree, Lot of 4 Search For sale is one lot of 4 brass fittings. If you need more information please ask.
|
|
|
spirax/sarco 3/4" TD-52 3/4" NPT Steam Trap 600psi
spirax/sarco 3/4" TD-52 3/4" NPT Steam Trap 600psi. 3/4" NPT Female 600psi up to 800°F, New in original boxes. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
|
|
|
spirax/sarco 1/2" TD-52 1/2" NPT Steam Trap 3.5-600psi
spirax/sarco 1/2" TD-52 1/2" NPT Steam Trap 3.5-600psi. 1/2" NPT Female 3.5psi- 600psi, Looks previously installed but comes in original box. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
|
|
|
R&N 3/8-18 NPT 4 FL EXTENTION PIPE TAP 6"LONG
USED BUT ALMOST IN NEW CONDITION& VERY SHARP. MSC PRICE NEW $77 Description: Pipe- Taps Thread Size: 3/8-18 Thread Type: NPT Material: HSS Finish/Coating: Bright Style: Extension Thread Length: 1.0625 In. 1-1/16 Overall Length: 6 Number of Flutes: 4 Thread Size: 3/8-18 Thread Type: NPT Material: HSS Finish/Coating: Bright Style: Extension Thread Length(Decimal Inch) 1.0625" Thread Length(Inch) 1-1/16 Overall Length(Inch) 6 Number of Flutes: 4 Shank Diameter(Decimal Inch) 0.7000 Projection(Decimal Inch) 454 Series: 126G Square Size(Decimal Inch) 0.531 x 0.5 Posted with
|
|
|
ELETTA V-1GL20 LIQUID FLOW MONITOR 10-20 LITER/MIN BRASS 3/4IN NPT 200494
Brand: ELETTA Condition: Used Model: V-1GL20 Material: Brass Mounting Type: Threaded Size: 3/4 IN Weight: 7 lbs Dimensions: 8 X 4 X 4 SKU: 200494 Additional Notes:
|
|
|
Air inlet regulator.1/4 in NPT. Slow Down any Air Tool. Die Grinders, Drills Etc
Up for sale are Air regulator valves for the inlet of any 1/4 npt tool. Face it most shops have way to much air pressure. It causes your rotary tools to spin to fast. Burning up drill bits, carbide die grinder bits, cut off wheels etc. These valves allow you to slow down the tool. Safer that way too. I stand behind what I sell. Returns are accepted! I'm happy to COMBINE SHIPPING. I almost always have well over 100 air tools on as well as hand tools etc! If you buy multiple items let me know before paying. I will save you all I can reasonably. I don't make money on shipping! Check my feedback and bid with complete confidence! Payment is expected within 4 days. If you need longer I am easy to get along with as long as you communicate. My customers and my standing with eBay are very important to me. If there is any issue please contact ... moreme before leaving feedback. Most likely we can work it out! I'm not happy until you are!
|
|
|
PARKER NO-SKIVE 3/8"NPT 3250PSI HYDRAULIC HOSE W / THREADED FITTINGS 481-4
PARKER NO-SKIVE 3/8"NPT 3250PSI HYDRAULIC HOSE W/ THREADED FITTINGS 481-4 Search PARKER NO-SKIVE HYDRAULIC HOSE W/ THREADED FIITINGS USED CONDITION 481-4 3/8"NPT. 3250PSI, 22.5MPa ALL MEASUREMENTS ARE APPROX. ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION GUARANTEED NOT DOA 66 SW5 KM 5.3.13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase ... morein shipping your order will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is dam
|
|
|
ITT BELL & GOSSETT 220PSI, 450ºF, 1"NPT, 1-1/2"NPT HEAT EXCHANGER BN51600300002
ITT BELL& GOSSETT 220PSI. 450ºF, 1"NPT, 1-1/2"NPT HEAT EXCHANGER BN51600300002 Search ITT BELL& GOSSETT HEAT EXCHANGER USED CONDITION WITHOUT ORIGINAL PACKAGING COOLING WATER INLET/OUTLET: 1"NPT HOT LIQUID INLET/OUTLET: 1-1/2"NPT SHELL: 220PSI. 450ºF TUBE: 150PSI. 450ºF ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA 4068 SW11 NW 1-15-13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping ... morecharges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information
|
|
|
WATTS LUBRICATOR OILER W/SIGHT GLASS 1/2" NPT L606-04C FITS AIR COMPRESSOR NIB
Sale is for One(1) NEW IN BOX WATTS LUBRICATOR OILER W/SIGHT GLASS 1/2" NPT L606-04C These may have very light scratches shown in photos These come as shown Spec's Are; Manufacture- Watts Model- L606-04C Ports- 1/2' npt We Combine Shipping Location- D-2-6 Thanks Kurt.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e6bd28323-0x100-
|
|
|
Swagelok SS-600-1-12 3/8 tube x 3/4 male NPT
New In Box(qty 10) Swagelok Male Connector 3/8 tube x 3/4 male NPT Stainless Steel
|
|
|
3 GARDNER-DENVER PNEUMATIC HEX NUTRUNNERS, 3/8" & 1/2", NPT: 3/8"
Inventory Number: 12090045186 Manufacturer: Description: 3 GARDNER-DENVER PNEUMATIC HEX NUTRUNNERS. 3/8" 1/2" NPT: 3/8" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: 1/2" HEX, 185 RPM, ONE: 3/8" HEX, 170 RPM, ONE: 1/2" HEX, 1200 RPM, ALL TESTED& WORK, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically ... morecharge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional i
|
|
 |