|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$6.90 Shipping Condition: New Location: Merrimack, United States Traminator Spindle Head Tramming Tool. This item is a quality designed and3D printed spindle tramming tool. This tool mounts most indicators with 0.375" ... morestems. The tool has a mount for 6.5" and 4.5" spacing and centered.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States VEVOR Milling Machine Power Feed. Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a ... morebreeze. Equipped with Gleason spiral bevel gears, our milling machine power feed ensures a stable transmission ratio, low noise output, high transmission efficiency, and excellent load-bearing capacity.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a breeze. Equipped with Gleason spiral ... morebevel gears, our milling machine power feed ensures a stable transmission ratio, low noise output, high transmission efficiency, and excellent load-bearing capacity.
Buy It Now
Free Shipping Condition: New Location: United States Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a breeze. Equipped with Gleason spiral ... morebevel gears, our milling machine power feed ensures a stable transmission ratio, low noise output, high transmission efficiency, and excellent load-bearing capacity.
Buy It Now
$9.65 Shipping Condition: Used Location: Mineral Wells, United States OSG 630-1456 Carbide End Mill 1/2 In. Dia. RTEOP-500 Used Lot of 4
Buy It Now
$10.00 Shipping Condition: Used Location: Onalaska, United States Here is a partial set of gears for a Pratt & Whitney dividing head. I will repeat: This set of gears is NOT for the Pratt & Whitney 3C dividing head. ... moreNote that this is for the dividing head that was an accessory to the model 3 mill and not the later model 3C mill.
$19.99 Shipping Condition: New Location: China Fit Most Milling Machine Tables. Note: the thread size is 1/2（12.48mm）.
Buy It Now
Condition: Used Location: Marthasville, United States 400 mm Horizontal Modular Machine Fixture. Base - 400 mm Steel. Willing to combine with other milling fixtures we have available.
Buy It Now
Free Shipping Condition: New Location: Penitas, United States 1/2" 4 FLUTE NEW "CGS" 233-1011-164ALTiN CARBINE SQUARE END MILL ALTiN COATEDMPN : 233-1011-164Primary Applications: Face Milling,Finish Profiling, Keyway ... moreProduction,Specialty CuttingEnd Type: Square End, Single EndHelix Angle: 30” HelixOverall Length: 3”Material: CarbideCoating: ALTiN/TiAINFlutes: 4-FluteShank Diameter: 1/2”Cutting Diameter: 1/2”
Buy It Now
Free Shipping Condition: New Location: Walton, United States 1 X Milling Machine. The quality of the product is improved, more durable and more precise. Large slider stroke: 45mm. Small slider stroke: 35mm. Motor ... morespeed: 18000r/min±15% of high speed motor. Low speed motor: 10000r/min ± 15%.
Buy It Now
Free Shipping Condition: New Location: Fremont, United States | | | | | | | High precision solid carbide end mill(s) made from the largest end mill manufacturer in the world! 4 Flutes. Single End 30° RH Spiral, ... moreTiAlN coated for improved performance and tool life in harder materials or high temperature applications, Precision ground using the highest quality grinding wheels, 3/4" cutting diameter x 3/4" shank diameter x 1-1/2" length of cut x 4" overall length, Cutting Diameter Tolerance: +.0000/ 0012" Shank Diameter Tolerance: +.0000/ 0005" Premium 10% Micrograin Carbide- perfect for your general purpose or difficult application! Need a custom quote on end mills and/or milling holders? Email us for for low pricing! We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, Additional quantities. Sizes, coatings, end mill holders, collet chucks, and more great deals on cutting tools available at the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless o
Buy It Now
Free Shipping Condition: New Location: Ontario, United States TiALN COATED. 5/16" 4 FLUTE SE REGULAR. Warm reminder 13/16" LENGTH OF CUT.
Buy It Now
$4.00 Shipping Condition: New Location: Skowhegan, United States 5/16 1/2 2.
Buy It Now
Free Shipping Condition: New Location: United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
$8.00 Shipping Condition: New Location: Phoenix, United States Fits Bridgeport and others with a 9-cog interface, Tool has. 625" center bore, 1-1/2" deep. "This is the most simple and functional tool. I have several ... moredifferent operations I perform on my mill and the table has to move a great deal up and down.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Package Including： Mills 5 Pieces 3/16" Standard Solid Carbide End Mills (As Picture Show, Contact Us If Receive With Missing Parts.) Specification： Item ... moreType:END MILL Flutes:4-Flute Coated:Tialn Coated Cutting Diameter:3/16in. Material:Carbide Helix Angle:30° Helix Shank Diameter:3/16in. Overall Length:2in. End Type:Single End Description： Item location: US fast shipping This product has undergone rigorous quality testing Durable and easy to install and replace The most cost-effective and best after-sales service.
Buy It Now
$9.95 Shipping Condition: New Location: Lake View, United States Compatible High Performance Upgraded End Mill For 5D Tactical Pro Readymill Jig. Our High Performance End Mill Upgrade is Compatible with 5D Tactical ... morePro Readymill lower receiver jig. High performance flutes eliminates vibration and harmonics.This design allows heavy chip load per tooth, for maximum material removal in aluminum.
Buy It Now
Free Shipping Condition: New Location: Long Beach, United States Made of M2 Titanium nitiride-coated high speed steel. These general purpose Four-Flute single end mill are designed for slot, pocket, keyway and profile ... morecutting. Center cutting design allows mills To be used as drills.
Buy It Now
Free Shipping Condition: New Location: Kingman, United States MANUFACTURER:YG TANK POWER. LENGTH OF CUT:1-5/8" LONG LOC. CENTER CUTTING: YES. FACTORY SQUARE CORNER. WELDON FLAT: YES.
Buy It Now
Free Shipping Condition: New Location: Mount Calvary, United States ADVANCED TOOLING, INC. 1/2x3, 5 FLUTE (HELICAL FLUTES AND COATED FOR LONG TOOL LIFE), 45° (22.5° P/S) CHAMFER MILL. THE CATALOG ITEM IS 4" OAL AND THESE ... moreWERE MADE AT 3" OAL. SPEEDS AND FEEDS CAN BE FOUND AT advancedtoolinginc.net IN OUR VIRTUAL CATALOG. FREE SHIPPING ON "BUY IT NOW". DISCOUNTS FOR MULTIPLES.
Buy It Now
$5.00 Shipping Condition: New Location: Waddell, United States For 1/4" thread or larger 20-56 TPI. -. 59" (15mm) Depth of Cut Clearance.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States Compared to standard carbon steel sawmill blades, DoubleHard features up todouble the blade life for increased durability. Wood-Mizer DoubleHard sawmill ... morebandsaw blades are compatible with a variety of portable sawmills and band resaws.
Buy It Now
$5.95 Shipping Condition: New Location: Battle Ground, United States Made in USA Made of steel for long service life. Hardened and grind heavy duty guide pins. 1/8" diameter stop rod x 2" long hardened rod. Stop rod is ... morebelow the surface of vise jaw for cutter clearance. Clamps 1/2" to 1-1/4" jaw width. Adjustable rod side to side. Precision positioning of parts
Buy It Now
$9.95 Shipping Condition: New Location: Lake View, United States Application: Compatible 80% Arms Gen 2 Easy Jig, 5D Tactical Jigs. This end mill is nothing like you have ever seen or used before. BE W A R E ! The tooling ... moremay look like ours, but I promise you they are not equal.
Buy It Now
Free Shipping Condition: New Location: New York, United States Condition is New.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Best used for: Standard milling, dadoing, and boring. Bit breakage is less likely. Up cut end mills are the best choice for most standard milling applications. ... moreThe up cut direction can leave behind a minimally rough top surface edge.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States R8 FMB22 Arbor 400R 50MM Face End Mill Shell Cutters W/ APMT1604 Carbide Inserts Use for shoulder milling, face milling and slotting Features: 400R 90° ... moreindexable milling cutter, matching with standard APMT1604 insert Made of alloy steel with high hardness and strength to ensure long service life High vibration-absorbing performance, improve the surface finish of the workpiece Set including R8 face mill arbor with 22mm bore for holding milling cutter Set including 4pcs APMT1604 inserts, great for shoulder milling, face milling and slotting Part Number: APMT1604 R8-FMB22 400R-50-22-4F R8 FMB22 Face Mill Arbor Model: R8-FMB22 Draw Bar Threads: 7/16 x 20 Milling Cutter Model: 400R-50-22-4T Professional Installation Is Highly Recommended.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States 1-1/4" 4 FLUTE M2AL SINGLE END MILL LONG LENGTH M2-AL MILLING NEW. Flute Length 4. Flute Length Type Standard. End Mill Category Square End. Material ... moreCobalt M42. Single or Double End Single. End Shape Square End.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States High Precision 1um 2/3 Axis Digital Readout Linear Glass Scale TTL DRO Display for Milling Lathe Application : This kind of DRO is commonly fitted to ... moremachines, especially for metal working — lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools — to allow the operator to work faster and with greater accuracy Supply Voltage range : AC 80V~260V; 50~60Hz，US Plug Power consumption: 15VA Operating temperature: 0~45 degree centigrade Storage temperature: -30~70 degree centigrade Relative humidity: Less than 90% Readout allowable input signal: TTL square wave Allowable input signal frequebcy: Less than 5MHz Max resolution of digital display length: 1µm (0.001mm/0.0001") Min resolution of digital display angle :0.0001/pulse.
Buy It Now
Free Shipping Condition: New Location: United States 3/8" 4 Flute SE Regular. Lot of 5 PCS. Length of Cut: 1". Finish: Bright. Center Cutting: Yes. Overall Length: 2-1/2".
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Lead Angle 45. Insert Compatibility SDMT 12. Complete Insert Compatibility SD/XD. Cutting Direction Right Hand. Maximum Depth of Cut (mm) 6.00. Item(s) ... moredescribed above and exactly what's pictured. Maximum RPM 5400.
Buy It Now
Free Shipping Condition: New Location: Seattle, United States 1 x Power Feed Z-axis for Milling Machine. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Rotate Speed: 0-200 RPM. 1 x Copper Gear & 1 x Flat Key Pin. ... more2 x Limit Switch Spring+1 x Handle Spring. 1 x Connecting Rod & 1 x Flange.
Buy It Now
Free Shipping Condition: New Location: Fremont, United States 4 Flutes, Single End 30° RH Spiral, TiAlN coated for improved performance and tool life in harder materials or high temperature applications. We are dedicated ... moreto making your buying experience as smooth and satisfactory as possible.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR 6" Rotary Table Horizontal Vertical Dividing Plates for Milling Machine. VEVOR Tilting Milling Table Tilting Angle Milling Machine ... moreAdjustable Plate. VEVOR Square Air Cooled Spindle Motor 2.2KW CNC Spindle Motor 220V ER20 Collet.
Buy It Now
$5.35 Shipping Condition: New Location: Seminole, United States 1/4" Cutting Diameter 16- 48 Range of Threads Per Inch Solid Carbide Single Form Thread Mill 1/4" Shank. 2.5" Overall Length, 062" ... moreWidth, 002" Flat Melin EDP#12311 Made in U.S.A Powered by
Buy It Now
$24.99 Shipping Condition: New Location: Pittsburgh, United States Z Axis (Knee Travel Up and Down) Power Feed Kit for Precision Matthews, Bridgeport, and Similar Knee Type Milling Machines. (See notes about the Bridgeport ... moremachines below). This thread needs to be 3/4-16 for this feed to work.
Buy It Now
Free Shipping Condition: New Location: Tijeras, United States PINS ARE. 850" OUT TO THE LEFT ON ONE STOP " plenty of room so you don't crash ". These are very useful in any kind of set up where you do not want to ... morehit the stop itself with your tool. If you are looking for a stop that gets as far away from the tool as possible and is BELOW the top of the jaw, here it is.
Buy It Now
Free Shipping Condition: New Location: Tijeras, United States The pins are both set BELOW the vise jaw. This lets you machine the edge of any part right down to the jaw. These are very useful in any kind of set up ... morewhere you do not want to hit the stop itself with your tool.
Buy It Now
Free Shipping Condition: New Location: Florence, United States Excellent bead appearance and sound X-ray quality. Served as both carbon dioxide and mixture gas, and stable arc performance in almost welding current.
Buy It Now
$13.65 Shipping Condition: Used Location: Thompson, United States 6" SPABO FACE MILL.
Buy It Now
$16.45 Shipping Condition: New Location: Broadview Heights, United States 1413 HANDWHEEL FOR THE FINE FEED ONFRONT OF THE HEAD. ORIGINAL PLASTIC HANDWHEEL ( 2193519). 1/2" BORE & 5" OD. OUR NEW & IMPROVED VERSION OF THE. >>WHEEL ... moreIS CAST ALUMINUM
Buy It Now
$7.99 Shipping Condition: New Location: Eagle, United States The smooth consistent resistance makes this tool a pleasure to use. Designed to keep the indicator tip on a plane that intersects the spindle axis. Extra ... morerigid design to eliminate the possibility of flex.
Buy It Now
$7.60 Shipping Condition: New Location: Ontario, United States These are top notch quality and ready to install to any 3/8" x 16 threaded handwheel or crank handle. B - 3/8" x 16 Thread Length - 0.51" (13 mm). C - ... moreFixed Handle Base Length - 0.47" (12 mm). A - Revolving Handle Length – 2.95" (75 mm).
Buy It Now
$7.99 Shipping Condition: New Location: Eagle, United States The smooth consistent resistance makes this tool a pleasure to use. Designed to keep the indicator tip on a plane that intersects the spindle axis. Extra ... morerigid design to eliminate the possibility of flex.
Buy It Now
Free Shipping Condition: New Location: China Name：UNC Three-tooth Thread Milling Cutter Coating： Balzers Brand Name： YUZETOOLS Material： Carbide Applicable materials：Suitable for all kinds of steel, ... morestainless steel and other material processing, universal series. Package includes： 1 piece carbide end mill Features： High quality thread milling cutter adopts Sumitomo 209 bar from Japan, Swiss imported coating. High hardness, high precision, earthquake resistance.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a breeze. Equipped with Gleason spiral ... morebevel gears, our milling machine power feed ensures a stable transmission ratio, low noise output, high transmission efficiency, and excellent load-bearing capacity.
Buy It Now
Free Shipping Condition: New Location: Durham, United States A Guide to Renovating the Bridgeport"2J" Variable Speed Milling Machine Publihsed in the USA by ILION Industrial Services. LLC Just in time ... morefor your winter project. ILION Industrial Services is pleased to announce this brand new edition of our popular Bridgeport renovation manual which is written specifically for variable speed models. If you are planning on refurbishing your existing Bridgeport Series 1"2J" or"2J2" Mill(With Variable Speed Head) or if you are out in the market looking for a good used Bridgeport, then this manual is a great place to start. A Guide to Renovating the Bridgeport 2J Variable Speed Milling Machine" our 152 page soft cover shop manual, is fully illustrated with over 400 B&W photographs and diagrams, plus step-by-step instructions for disassembling, cleaning, reassembling and adjusting all of the critical components of the variable speed 2J head milling machine. Bridgeport never produced a full blown maintenance manual for their mills so this is the closest you will come to a step-by-step guide. Please take a look at the sample pages in the photos above for an example of what to expect. The photos can be enlarged by clicking the button beneath the photos. The typeface of the manual is printed two points larger than normal for those of us who prefer to work at the bench without the use of our reading glasses. The instructions are simple and easy to follow. no prior machinery renovation experience is required. Though the Bridgeport is an industrial machine, it is well suited for the home garage shop or small business and the task of finding one, getting it home and getting it back into operating condition is not as expensive and daunting as you may think. Let us show you how. If you are interested in the Bridgeport J Head(The Step Pulley Model) please check out our other listings for that book. Hundreds of the J Head Bridgeport manual have been sold to date so please check out the feedback from our customers to see what everyone else is saying about
Buy It Now
Free Shipping Condition: New Location: Pittsburgh, United States As long as it is the Bridgeport Type Machine, it should fit. X Axis (Left/Right Table Travel) Power Feed Kit for Precision Matthews, Bridgeport, and Similar ... moreKnee Type Milling Machines. These are very high quality units, made in Taiwan, Not China.
Buy It Now
$20.00 Shipping Condition: New Location: Taylorsville, United States HI YOU ARE LOOKING AT A POWER DRAW BAR FOR A VARIABLE SPEED R8 COLLET IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET. MSC, ATRUMP, WT TOOL, ACRA, ACER, ... moreCHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. YOU JUST PULL DOWN ON THE HANDLE AND MOVE IT LEFT OR RIGHT TO LOOSEN OR TIGHTEN THE DRAW BAR, LET GO OF THE HANDLE AND IT RETURNS TO TOP AUTOMATIC. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE AND TO DAMPEN ANY VIBRATION FROM THE HEAD. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. HANDLE FULLY ADJUSTABLE TO FIT YOUR PREFERENCE AND TO TAKE UP ANY WEAR THAT MIGHT HAPPEN OVER TIME. USES ORIGINAL DRAWBAR SO NO SPECIAL DRAW BAR TO BUY. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. IF YOUR COLLET STICKS IN THE SPINDLE RETURN THE IMPACT TO THE TOP AND BRING IT DOWN AND STRIKE THE DRAWBAR AS YOU WOULD WITH A HAMMER. THERE IS ALSO A REGULATOR BUILT IN THE IMPACT WRENCH TO KEEP FROM OVER TIGHTENING THE DRAWBAR. WE DESIGNED THIS POWER DRAW BAR IN OUR SHOP AND HAVE SOLD OVER 400 UNITS WITH GREAT RESULTS PLEASE CHECK OUR EBAY FEEDBACK ALL OF THE MAIN BODY IS MADE AND ASSEMBLED IN OUR SHOP HERE AT M&T MACHINE, TAYLORSVILLE N.C. 28681 USA. WE DEVELOPED THIS POWER DRAWBAR IN OUR SHOP AND HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. BEWARE THERE ARE INFERIOR COPIES OUT THERE SO PLEASE GET THE ORIGINAL. WE OFFER A FULL 30 DAY RETURN POLICY IF NOT FULLY PLEASED WITH THE TOOL RETURN IT FOR A FULL REFUND. ANY QUESTIONS CALL 828-632-1500 HOME. PLEASE CHECK OUR EBAY FEEDBACK AND PLEASE LOOK AT OUR EBAY STORE WE HAVE OTHER MACHINE SHOP TOOLS FOR SALE.AS WELL AS POWER DRAWBARS FOR STEP PULLEY HEADS THANK YOU VERY MUCH FOR LOOKING TODD AND S
Buy It Now
Free Shipping Condition: New Location: Murfreesboro, United States Tap for swivel handle:3/8-16.
Buy It Now
$16.45 Shipping Condition: New Location: Broadview Heights, United States QUILL HANDLE ASSEMBLY. SPRING LOADED. 1" BORE AND PINS ARE 11/16" CENTER-TO-CENTER.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States 2AXIS DRO 3AXIS DRO 2AXIS DRO LCD SCREEN 3AXIS DRO LCD SCREEN. Min resolution of DRO angle :0.0001/pulse. 1pc DRO Or 1pc Linear Scale (Travel Length 100/150/200/250.1000MM). ... moreReadout input signal: TTL square wave.
Buy It Now
Free Shipping Condition: New Location: United States 【WIDE APPLICATION】 Designed to fit milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and more, this power feed is ... moreversatile. Whether you are a novice or a skilled operator, installing this power feed is a breeze.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States 1/8-1/2" HSS 2 Flute End Mill Set 6PC High Speed Steel Center Cut 3/8 Shank With Wooden Case. 1/4 x 3/8 HSS. 3/16 x 3/8 HSS. 1/8 x 3/8 HSS. 3/8 x 3/8 ... moreHSS. 1/2 x 3/8 HSS. 6 Pcs/ Set.
Buy It Now
Free Shipping Condition: New Location: Broadview Heights, United States FITS BRIDGEPORT AND MOST IMPORT MILLS. SPRING IS TIGHTLY WOUND - WEAR PROTECTIVE GEAR WHEN INSTALLING SPRING INTO HOUSING! CLOCK SPRING HOUSING MUST HAVE ... moreSLOT - WILL NOT FIT HOUSING WITH PIN! SPRING MUST BE INSERTED MORE THAN HALFWAY INTO HOUSING BEFORE THE WIRE IS SNIPPED!
Buy It Now
Free Shipping Condition: New Location: Murfreesboro, United States Tap for swivel handle:3/8-16.
Buy It Now
$6.75 Shipping Condition: New Location: Broadview Heights, United States WE LOOK FORWARD TO HELPING YOU WITH ALL YOUR BRIDGEPORT NEEDS. OEM2193547 REVERSE KNOB STUD -2193433 REVERSE KNOB -1180818 SNAP RING. FEED REVERSE KNOB ... moreASSEMBLY. 8-32 THREAD . ASSEMBLY INCLUDES.
Buy It Now
Free Shipping Condition: New Location: Cranberry Township, United States
Buy It Now
$30.50 Shipping Condition: Used Location: Wilmette, United States This is a very good condition 5" face mill. The insert beds are in great condition. Nothing that impacts the integrity of the item. Has a 1 1/4" arbor ... moreopening.
Buy It Now
$8.25 Shipping Condition: New Location: Boring, United States The spindle square is adjustable with 3/8 holes for 3-6". It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, ... moresine bar and lathe. We built these as there wasn't square on the market that was universal to different vise sizes or allowed you to change indicators easily or use your own.
|
|
|
|
SHERLINE 5000 Mill Vertical Milling Machine
This is Sherline Model 5000 Vertical Milling Machine. Very good used condition and works fine. Comes with chuck key and what is shown in the pictures. No other parts or other attachments. Please see attached pictures for more details. Selling what shown in the pictures only. Thank you. PLEASE NOTE: Returns will be accepted if item is not as stated or described. Buyer must contact me via ebay mail within 2 days of receiving the item to qualify for refund. Refund will be sent when the item is returned to us in the same condition as sent to you and must be returned within 7 days. Please contact me with any questions or concerns. Thanks PLEASE NOTE: Shipping charges quoted is for USPS Parcel Select as they are the least expensive. If you want to receive your item faster. You will have to pay for the additional cost. Includes tracking no but Insurance ... moreis an option and it is highly recommended. It is the buyers responsibility to decide if he/she wants to insure there purchase. Buyer must notify immediately any and all shipping damage with the carrier. We only sell and ship to the lower 48 states. Another important NOTE: We mostly sell preowned items and returns will be accepted if item is not as stated. Buyer must contact me via ebay mail within 2 days of receiving the item for us to accept an item return for refund. A refund will be sent when the item is returned to us in the same condition as sent to you and must be returned within 7 days. Please contact me with any questions or concerns. Thanks If you are in California and item is shipped to California sales tax for California will be added. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1 3/8 HSS 6 Flute Single End, End Mill 1" Shank Union Twist Drill
1 3/8 HSS 6 Flute Single End. End Mill 1" Shank Union Twist Drill This item is in good used condition and fully functional. This item will ship Flat Rate Priority Mail. If buying more than one item. Wait for invoice for combined shipping.
|
|
|
CINCINNATI, HORIZ. MILL, CINTIMILL 205,12 X 53 TABLE,VG
MODEL 205 CINTIMILL S/N 8J512U5R-75 UNIVERSAL TABLE POWER TAKE OFF ON TABLE 12" X 53" TABLE TRAVELS. 27" LONG. 12" CROSS, 14" ON THE KNEE RAPID TRAVERSE IN ALL DIRECTIONS 40-1800 RPM 50 TAPER(2) OVERARM SUPPORTS COOLANT 10 HP. WIRED 220 VOLT, 3 PHASE WEIGHT.APPROX 4200LBS. CLEAN. RUNS WELL, NO ISSUES NO CHARGE FOR LOADING
|
|
|
Starrett No. 237 Depth Gage Gauge Machinist Tool Gunsmith Toolmaker Lathe Mill
Starrett No. 237 Depth Gage Gauge Machinist Tool Gunsmith Toolmaker Lathe Mill Description: This offering is for a STARRETT 237 Depth Gage in excellent condition. The finish is not tarnished or rusted rather blued from age- kind of neat- you won't be disappointed. It has a 6" Rule with mm graduations. The tool has a very light engraving 5-81. Please ask any questions. Shipping to 48 USA only will be $2.95. Shipping anywhere else is unavailable. I accept Paypal. Thanks for looking. Shipping: SEE DESCRIPTION Payment: SEE DESCRIPTION click to Enlarge click to Enlarge click to Enlarge inkfrog terapeak.
|
|
|
USED ERICKSON QUICK CHANGE NMTB-40 END MILL HOLER 3/8" EMH QC-40 (2-60-209-102)
LISTING IS FOR A USED QUICK CHANGE NMTB-40 E ND MILL HOLDER BRAND- ERICKSON PAR T# 2-60-209-102 HOL E SIZE- 375" GAGE LE NGTH- 2.375" SHANK- QUICK CHAN GE NMTB-40 CONDITION- GOOD USE D Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. ... moreAS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR
|
|
|
Chip Conveyor Meant for Sharp 24 x 12 Mill
This came new with my sharp 24 x 12 mill. It also came with a chip conveyor. So I am staying with the belt conveyor. Should be able to hook this up to your equipment. As Is never used. Comes with electrical control. See pictures. Please insure. 4ft x 4ft skid it would hang off a foot. 812 663 6311 questions. Your shipping cost. Please insure. Weight is estimated. Buyer reponsable for setting up shipping
|
|
|
KEARNEY & TRECKER, KT, VERTICAL MILL, #4, MODEL H, R.O.'S, TOOLING, 50 TAPER
MODEL H SIZE#4 80" TABLE OLDER. BUT WORKING 2X READ-OUTS 15 HP. WIRED 220 VOLT POWER DOWN FEED ON HEAD 20-1000 RPM MISC. TOOLING MANUAL IF AVAILABLE RUNS WELL
|
|
|
MACHINIST TOOLS LATHE MILL ** Lot of Misc. Machinist Tools **
UP FOR AUCTION MACHINIST TOOLS& PARTS LOT OF MISCELLANEOUS MACHINIST TOOLS· MADE IN USA* PLEASE REFER TO ALL PICTURES TO SEE CONDITION* PLEASE REFER TO ALL PICTURES TO SEE EXACTLLY WHAT IS INCLUDED IN YOUR PURCHASE* Being SOLD AS IS– Do not know much about machinist tools but will try to describe as best I can. I am in the learning process. So any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings. We have a large array of machinist tools up for auction, PLEASE. DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. SERIOUS INQURIES ONLY. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. No RETURNS PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM ... moreWITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13e60c548ef-0xef-
|
|
|
BRIDGEPORT MILL PART, MILLING MACHINE R8 SPINDLE USED
USED R 8 SPINDLE IN GOOD CONDITION! WILL FIT BOTH VARIABLE SPEED OR STEP PULLEY MILL. ORIGINAL BRIDGEPORT PART! CHECK OUT THE REST OF OUR BRIDGEPORT REPLACEMENT PARTS IN OUR STORE. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email matacoinc@aol.com for further information. Terms and Conditions We guarantee the items are exactly ... moreas said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CNC 3 AXIS STEPPER MOTOR DRIVE CONTROL SYSTEM LATHE OR MILL RETROFIT VERY RARE
SquareTrade © AP6.0 3 AXIS CNC STEPPER MOTOR DRIVE CONTROL SYSTEM. VERY RARE HIGH QUALITY 3 AXIS STEPPER MOTOR CONTROL SYSTEM. MADE IN USA BY A TOP US CORPORATION. YOU GET TWO UNITS- 1) STEP DOWN TRANSFORMER 13.8 V AND 2) CONTROLLER WITH 3 XYZ CONNECTORS. COMES AS SHOWN IN PHOTOS. REVIEW PHOTOS. CONNECTORS. GOOD CONTROLLER FOR ANY CNC MILL OR LATHE SYSTEM. SHIPPING AND GENERAL INFORMAITON We ship with care. Shipping charges for smaller item includes packaging costs and handling fees. Insurance is charged separately based on the amount. Email for international shipping charges. Pay us securely with any major credit card through PayPal up to $500. Payments exceeding $500 should be sent by direct bank wire transfer or bank certified check. Buyer should send the payment within 7 days after winning the item. Orders will normally be shipped ... morewithin 4-15 days based on nature of item. Mode of payment, bank clearance, special packaging requirement etc. Freight items require more handling time for proper packaging and paper work. We can’t hold responsible for lost or damaged packages. It is buyer’s responsibility to initiate the claim from lost, misplaced or damaged packages. Customs and other local taxes if any are buyer’s responsibility. All items including export control items and FDA regulated if any are subject to United States Laws and regulations. All international shipments have no insurance coverage and restricted tracking. California residents. Add 9.50% sales tax. All currency amount referred to in our listings are in United States Dollars. All items are pre-owned and unless described carries no warranty or guarantee expressed or implied and no technical support. Sale is“as is” and with no exchanges. No returns or no refunds. All sales are final. As we sell items“as is” The items may be dusty or may have some stickers or some kind of ID mark of previous owner. International freight shipping if offered in the description is dock to port only. Domestic freight shipping is normally Dock to Dock and does not inc
|
|
|
7 Machinist Lathe Hold Down Clamps VULCAN No. 64,74,& 54 Finger Tooling Mill NR
7 Machinist Lathe Hold Down Clamps 5 Vulcan 2 Unmarked The Finger Fork ones are marked Vulcan No.64.Forged in USA and measure 4 1/2" long and 1 3/4" wide. Next 2 Gooseneck are marked Vulcan No.74 Forged in USA and measure 4"x 1 5/8" One is marked No.54 measures 3"x 1 3/4" Pair of large slotted ones are not marked measuring 6"x 1 1/2"x 3/4" Will gladly combine shipping on same day auctions. No Reserve Auction! Don't forget to check out our!
|
|
|
MACHINIST LATHE MILL Jacobs Drill SUPER Chuck BALL BEARING 18N 1/8 3/4 JT4
Up For Auction is a Jacobs Ball Bearing Super Chuck 1/8-3/4 18N 4jt. It does turn freely. But does show rust. It is ready to go. Please look at pictures and ask questions prior to bidding. Thanks for looking and Good Luck. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13e6f0bd0fd-0x102-
|
|
|
DOALL CNC VERTICAL MILL - CENTROID 3-AXIS CNC CONTROL
DOALL VERTICAL MILL w/ CENTROID 3-AXIS CNC CONTROL Model# FV-2CN-CNC-880 Centroid M-40 3-Axis CNC Control Installed- 1996. Control Serial# 1498. Model# M-40. Table Size: 12" x 54-1/2" Manually Adjustable Spindle Speeds: 60 to 490 RPM Low Range- 545 to 4350 High Range. Travels: 32" Table X- 20" Saddle Y- 15" Vertical Knee- Quill Travel: 6" Centerline of Spindle to Vertical Knee Ways: 20" 40ER Spindle Taper for 40NMTB Tooling. EQUIPPED WITH: Hardened and Ground Box Style Saddle Ways. 3-Axis Ball Screws. Table, Saddle, Quill. SEM Axes Drives. Made in England( CE Certified) 1) Collect Type Tool Holder. Power Elevation Motor and Manual Hand Crank System for Knee Elevation Adjustment. Machine Has(2) Adjustable Stops on Table. Saddle and Knee Travels. Rigid Ram Design( Ram Does Not Move and Head Does Not Tilt or ... moreSwivel) Dana Summit Air Powered Tool Draw Bar. Quick Change Collar(The Screws on the Spindle are Missing) Bijur Spray Mist Coolant System. Air Regulator with Lube and Filter Bowls. Bijur Automatic Lubrication System. Coolant System Sump in Base of Machine. Parts Manual. Schematics and Control Schematics( NO Programming or Operation Manuals) Centroid Control 4-Station Pulse Generator. Wide Coolant Catch Pan for Machine Base. 4 HP Spindle Motor. Machine is Wired for 3 Phase. 60 Hz, 240 Volt Operation ONLY. Machine Overall Size: 68" L-R x 82" F-B x 95" High x Approx. 3.000 Lbs. Machine Is In Very Good Condition* HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
4" ADJUSTABLE TAILSTOCK CENTER DIVIDING HEAD TAIL STOCK for ROTARY TABLE MILL
This auction is for a good used tailstock. 4" ADJUSTABLE TAILSTOCK CENTER DIVIDING HEAD TAIL STOCK for ROTARY TABLE MILL 4" height. Approx. 5/8" travel. In good working condition. Works smoothly paint shows some wear
|
|
|
NICE TOOLMAKER MADE BRIDGEPORT MILL SPINDLE LOCK
NICE TOOLMAKER MADE BRIDGEPORT MILL SPINDLE LOCK This item is a t oolmaker made Brid g eport Mill Spindle Lock. It is handy when you want to lock the spindle from turning when indicating or broaching. It is a simple design that pays for itself after a few uses. The mill brake always has a little play in it. It is in good condition. SALES WITH HEAVY OR MULTIPLE ITEMS PLEASE WAIT UNTIL WE CONTACT YOU WITH EXACT SHIPPING CHARGES. I WILL BE GLAD TO COMBINE SHIPPING. WHICH MAY MAKE THE TOTAL LOWER. LARGE OR HEAVY ITEMS OR ONES THAT ARE SHIPPED FARTHER MAY MAKE SHIPPING HIGHER. NEW HIGHER U.S.P.S. POSTAL RATES FORCE AN INCREASE IN POSTAGE FEES. I AM SORRY. I HAVE BEEN LOSING MONEY ON EVERY ITEM LATELY BECAUSE OF SHIPPING CHARGES. INSURANCE IS INCLUDED IN SHIPPING. UNLESS YOU STATE THAT YOU DO NOT WANT IT, AND AGREE TO ACCEPT THE RISK. In the next ... morefew weeks I will be selling precision toolmaker's tools that belonged to a good friend who started in the trade in the 60s and was a top notch toolmaker/modelmaker for many years. He made many of the tools and some were bought when American made precision tools were readily available. A few are not American made. Since I am a retired toolmaker/modelmaker I will try to describe the items that I am familiar with. If I am not familiar with an item I will try to research it and give the best description I can. I will be glad to combine shipping on multiple items. If you would like additional photos or information please email me. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
PROTO TRAK CNC VERTICAL BED MILL # DPM3 - A.G.E 3
PROTO TRAK CNC BED MILL Model: DPM3/ Year: 1996/ Condition- Excellent Specifications: Table size. 10 x 50 Travels X.Y, Z. 31, 17, 23.5 Quill travel. 5” Spindle taper. NMTB40 Spindle speed range. 70-3950 Spindle center to column. 19” Spindle hp. 3 hp Work piece weight. 1320 lbs Height of table. 38” Max. height head up. 95” Min. height head down. 85” Front print of machine. 24 x 44 Approximate weight. 4.100 lbs Equipped With: Proto-Trak A.G.E 3 controller Power draw bar Glass scale option 220V 3ph Manuals. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
12" x 16" DOALL C80 BAND SAW machine lathe mill shop metal cut production
Model C80 Doall automatic saw 12"x16" capacity Blade size 1"x144" has two extra new blades) Hyd blade tension Hyd vises 440v 3ph Delivery is possible within tx. Would be delivered on loboy trailer in picture. Buyer must unload. Weight is 4. 500 lbs approx. Buyer must be ready to unload at time of delivery. Email for delivery pricing. Posted with
|
|
|
Mini Mill Column
A used column from a Harbor Freight Mini Mill. It is in good condition. Also fits Grizzly. Micro Mark and Little Machine Shop mini mills made by Sieg. The rack is not included. I'm also selling the complete tilt mechanism. Should the same bidder win both. The shipping is the same as the column alone, since both the column and tilt mechanism can fit in a large USPS Flat Rte box.
|
|
|
Late Model Bridgeport Mill Vari-Speed Very Nice Machine. Z-572
You are bidding on a Very Late Model Bridgeport Mill Specifications Base Serial# BR 272396 Head Serial# 11550001 220/3 Phase 6" Kurt Vise 9" x 48" Table Chrome Ways 2 HP Motor Vari Speed 1 Shot Lube Acu-Rite MillMate DRO(X-Y Axis) Very Nice Condition Good Condition: Item is free of any significant dents. Marks, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have dents. Marks, imperfections that do not impair the functioning of the item(unless specified in the description) Machines/Tools that cost above $500.00 please pay with credit card or wire transfer. We guarantee that the item purchased is packaged exceptionally well. Once it is picked up by a common carrier(UPS etc) we lose control over how the item is handled. If you receive an item and ... moreit(or the box) appears damaged. Do not sign or accept. If the item is left at your home or business, and you later find that it is damaged, take pictures and notify the carrier. inkfrogproseries. The machine/item is located in Bay Shore. NY 11706 Shipping costs to buyer location are not included with the machine price We can provide a freight quotation, buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required, we quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements, customer shipping method& machine design. Shipping can be confusing. Relatively inexpensive, but heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at info@sagmachinery.com or give us a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping.Upon arrival of your machine, unpack and immediately check for visible damage. Call Sag immediately– you will need to take pictures and email to info@sagmachinery.com. Make sure you
|
|
|
3/4"DIA 3/4" S 2"LOC 4"OAL TICN CENTER CUTTING BALL END MILL
You are bidding on a used but in good condition 3/4" dia. Ball end mill Items specs are in the title this item is in good condition- the end is still sharp I can take specific pics if needed Thanks for looking and good luck bidding Posted with
|
|
|
BT40 WITH 4" VALENITE FACE MILL 539.62.656 MORE BT40 HOLDERS LISTED LOT C2620
LOT# C2620 WE ARE OFFERING A BT40 WITH A 4" VALENITE FACE MILL VALENITE PART# 539.62.656 FREE SHIPPING IN USA SEATS IN GOOD CONDITION, EXCEPT 2 OF THEM HAVE BEEN BUMPED BUT SHOULD NOT AFFECT CUTTING. SEE PICTURES. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
MILL, BENCH, R-8 SPINDLE, 110 VOLT, 6" X 24 TABLE, GOOD
FOREIGN BRAND 6" X 24" APPROX. TABLE. DID NOT MEASURE ACCURATELY 1 HP MOTOR. 110 VOLT SMALL VISE R-8 SPINDLE. LIKE BRIDGEPORT STEP PULLEY. FOR SPINDLE SPEED CHANGES NO POWERFEEDS WEIGHT 450 LBS.
|
|
|
LOT OF 20 METAL FILES (STILETTO, NICHOLSON, SIMONDS DISSTON, TOME, MILL BASTARD)
Lot of assorted metal files(20) from 8" to 17" Ten flat files 10"17" One 90 degree file 12" Six round files 10"14" fine to coarse, one half round file 8" two knife blade files 8" fine(new) Disston. Various brands, Stiletto, Nicholson, Simonds, Tome, mill bastard. Ten wood handles included in lot.
|
|
|
NICE TROYKE Cross Slide Rotary Table CLEAN 15" x 15" DMT-18 Milling mill rotary
Over $5.600 New. Military surplus from a closed plant in Minneapolis. MN. They were using this for machinery repair. They had a Heald grinding fixture and they used this to position and feed it. Troyke Cross Slide Rotary Table. Model MDT-18 Serial No 3728-4 15x15" working surface. 13x13" cross slides travel, 450 lb cap. 30 sec. ang. accuracy. 9.125" thick. 530lb ship wt. TROYKE Cross Slide Rotary Table. Combination rugged unit with X, Y and rotary positioning. Hardened and ground center locating hole, hardened and ground Acme cross feed screws mounted in taper roller bearings with backlash controlled by adj. bronze feed screw nuts, tapered gibs on cross slide, working surface, slides and dovetails are precision ground, satin dialdgrad. in 0.001" satin vernier offers 15 sec. readings on rotary, table locks, stops on cross ... moreslide for gage blocks or length gages. I reserve the right to end a listing if there is not a bid. If a bid has already been placed I will not end a listing early. If you are interested in Bidding bid early to prevent the item from being sold outside of eBay(I have a used store) Thanks Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know.
|
|
|
Niagara 1/2" Cornering Radius End Mill
Niagara 1/2" Cornering Radius End Mill Used but still has some life. Resharpen it for best use. Shank Diameter: 1" Material: HSS Weldon# T30-8M-5 Shipping will be $5 via Priority mail. Will combine shipping.
|
|
|
Precision V-Block Pair 1.23" x 1.23" x .80" Machinist, Jig Grinder , Mill,
Precision V-Block Pair 1.23" x 1.23" x.80" Machinist. Jig Grinder, Mill. Tool room Great condition with clamp
|
|
|
HURCO BMC-30 MHP 30 CNC VERTICAL MACHINING CENTER MILL
1990 MHP/Hurco MHP-30. Dynapath delta 20 control X axis- 30" Y axis- 20" Z axis- 20" 15 Horsepower 208/230/460 3 phase 24 pocket umbrella tool changer Flood coolant Cat 40 tooling pictured included Vise and toe clamps included Mill is currently under power and making parts. The only thing wrong with the machine is one of the tool pockets in the tool changer has a broken finger. other than that it runs great and makes good parts. Sale includes all the cat 40 tooling and vise pictured. So this is pretty much a turn key setup. Reason for selling is the shop is closing. All sales are final, so ask any questions before you bid. Payment thru wire transfer or certified check only. Buyer is responsible for all rigging/transport arrangements and cost. No exceptions. Posted with
|
|
|
SUPERMAX #YCM-40 CNC VERTICAL MILL
SUPERMAX#YCM-40 CNC VERTICAL MILL EQUIPPED VWITH: CENTROID CONTROL- AGE:2001- 10 65 38- 3 AXIS- POWER DRAW BAR- 3HP- 9" X 49" WGT: PRICE: FOB BROOK PARK. OH- $ 8,950.00 SUBJECT TO PRIOR SALE BT 7728 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT DE MAXWELL OR JOHN AT: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142 sales@mckeanmachinery.com
|
|
|
SIP MP-3K Jig Boring Machine very clean Mill Milling Cnc
SIP MP-3K Jig Boring Machine very clean Serial#4304 Please feel free to call me with any questions at: Phone: 505-880-1540 Thanks John Specifications: Table Size.20.5" x 15" Longitudinal Travel of Table.18" Traverse of Spindle Saddle.14" Max Distance Table to Spindle.24.5" Space Between Uprights.23.5" Internal Spindle Taper.2MT External Spindle Taper.SIP 2E Spindle Speeds.75.125,210,480,770,1250,2500 Feeds.0.0008.0016,0025,0035,005,007" Drilling Capaciy(Cast Iron)1" Boring Capacity.4" Spindle Quill Travel.6" Travel of Vertical Slide.15-3/8" Equipped With: SIP Locating Dial Indicator Spotting Tool With Morse Taper Adaptor Boring Had. Mounts In Spindle collets Purchasing Information: The machine is located in Albuquerque NM There is no charge to load onto buyer’s truck Cleared funds are ... morerequired prior to shipment Payment methods include VISA/Master Card. Wire transfer, certified check and paypal Posted with 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13ef388008e-0xf7-
|
|
|
11 none carbide end mills mill tools tool
you get what you see except for the $1.2 or 3 unused.a couple have reformed tips.18 in all.largest is 1" Connecticut buyers to pay 6.35% sales tax. I will combine.Handling$1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plous $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
MACHINIST TOOLS LATHE MILL Dayton DIE-ALIGNER Set *Punch/Die Alignment
Dayton. DIE-ALIGNER(punch/die alignment) box says: Normal 0 false false false EN-US X-NONE X-NONE Simply place Die-Aligner of thickness equal to your punch to die clearance over the hole. Bend the points into the hole and insert the punch. You have perfect alignment. piece count: 002= 5. 003= 10, 004= 5, 005=10, 006= 10, 007=9, 008= 8, 009= 7 and.010= 8 pieces 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 USA and International Buyers: I will refund only if I have neglected to describe the item with reasonable accuracy. Please check all clothing measurements. Vintage is just that. And not meant to be new. West Coast(USA) shipping may cost more. We can combine shipping on multiple purchases. If unsure about anything, ASK QUESTIONS. International Buyers: We recommend Priority International, if you don’t specify ... morethis, your item will be shipped First Class, but at your own risk. Be aware that Customs Houses are opening packages and damaging items. I pack for your protection, but I have no recourse against your Customs House for damage they do on any item. I ship by the guidelines of the postal system. Please be aware that I am not responsible for your country’s Customs Fees.
|
|
|
Mini Mill X2 Air Spring Conversion Kit
Mini Mill X2 Air Spring Conversion Kit. Bo ught from LittleMachineShop.com Used but still in great condition. Convert torsion spring mini mills to air spring. Newer mini mills use a torsion spring mounted on the side of the column to support the head. This kit provides all the parts required to change to a vertical air spring that mounts inside and above the column. With the air spring installed. You can move the mill head up until the top of the casting is almost flush with the top of the column. You can move it down until it almost contacts the adjustable Z-axis stop set in its lowest position. Besides all the parts required to mount the air spring. This kit also includes a longer Z-axis rack so you can take advantage of the longer head motion. This air spring has about 35 pounds of force. This is not enough to totally support the head. ... moreBut it is a heck of a lot more support than the torsion arm provides. Compatibility This product works with the following mills: Cummins 7877 Mini Mill, Grizzly G8689 Mini Milling Machine, Harbor Freight 44991 Central Machinery Mini Mill/Drill, Hare& Forbes HM-10 Mini Mill Drill, Homier 03947 Speedway Mini Mill, Micro-Mark 82573 MicroLux Milling Machine,
|
|
|
Mini Mill X2 Power Feed Kit
Mini Mill X2 Power Feed Kit. Used, but in good functioning condition. Came off a working Central Machinery 44991. It was purchased from LittleMachineShop.com. Pix shows screws missing in casing. But they are included Compatibility This product works with the following mills: Cummins 7877 Mini Mill, Grizzly G8689 Mini Milling Machine, Harbor Freight 44991 Central Machinery Mini Mill/Drill, Hare& Forbes HM-10 Mini Mill Drill, Homier 03947 Speedway Mini Mill, Micro-Mark 82573 MicroLux Milling Machine, See my other auctions for other related X2 parts from the same mill setup
|
|
|
V590 Indexable Square Shoulder End Mill, V590 A16 200 WE22
VALENITE V590 Indexable Square Shoulder End Mill V590 A16 200 WE22 06762730/05 5C 762919 1.500 DIAMETER
|
|
|
MILL VERTICAL EXCELLO 602
TABLE SIZE: 9" X 42" TABLE TRAVEL(X) 30" SADDLE TRAVEL CROSSFEED(Y) 13" QUILL TRAVEL DOWNFEED: 6" KNEE TRAVEL: 16-1/2" RAM TRAVEL: 12" THROAT DISTANCE: 0" MIN. 16 MAX. TABLE TO SPINDLE NOSE GAGE LINE: 2-1/2" VARIABLE SPEED RANGE(VARIABLE) LOW 85- 600 RPM HIGH: 600-4000 RPM CONTROLLED DOWNFEED RANGE: 0015" MANUAL ADJUST: 003" MANUAL ADJUST: 006" KWIK CHANGE TOOL QUILL DIAMETER: 3-1/2" DRILLING CAPACITY(MILD) 3/4" BORING CAPACITY(MILD) TO 6" MILING CAPACITY(MILD) 2 CUBIC IN/MIN. MAX: WEIGHT OF WORKPIECE: 750 LBS. T-SLOT SIZE: 5/8" X 2-1/2" ONE SHOT BIJUR LUBRICATION WORK LIGHT EXCELLO POWER FEED X AND Y AXIS SCALES WITH PATH FINDER DRO WAY COVERS(ACCORDIAN STYLE) CLEANED. CYCLED, AND PAINTED SPINDLE MOTOR: 1-1/2 HP VOLTAGE 230/460 WEIGHT: 2.150 LBS. BUYER IS ... moreRESPONSIBLE FOR ALL SHIPPING. SHIPMENT OF MACHINE WILL BE AFTER RECEIPT OF FULL PAYMENT.
|
|
|
DOOSAN DMV4020 CNC Vertical Machining Center Mill, Cat 40 tool Fanuc, VMC Daewoo
DOOSAN DMV-4020 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: MANUFACTURED NEW 2006 TABLE SIZE 47" x 20" MAXIMUM TABLE LOAD 1.760 LBS X AXIS TRAVEL 40.2" Y AXIS TRAVEL 20.1" Z AXIS TRAVEL 24.6" SPINDLE NOSE TO TABLE TOP 6" 31" RAPID TRAVERSE RATE X& Y AXES 1181 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 50- 8.000 RPM SPINDLE MOTOR 20 HP TOOL CHANGER CAPACITY 24 STATIONS MACHINE DIMENSIONS. APPROX. 120" X 107" X 109" H MACHINE WEIGHT. APPROX. 16.300 LBS POWER REQUIREMENTS 36 KVA 205-235v/ 3ph EQUIPPED WITH: FANUC 21i-MB CNC COLOR CONTROL, RS-232C PORT INTERFACE FOR DNC OPERATION, RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) CHIP CONVEYOR(SIDE DISCHARGE) HAND-HELD REMOTE PULSE GENERATOR, CUSTOM MACRO B(USER DEFINABLE) PCMCIA CARD READER/PORT, STANDARD ... moreCOOLANT SYSTEM WITH TANK& PUMP, FULLY ENCLOSED GUARDING. ALL AVAILABLE MANUALS*RIGID BOX WAY CONSTRUCTION* LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this great mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowled
|
|
|
Mini Mill X2 Saddle and related parts
Mini Mill X2 Saddle and related parts. used but good conditio n. Comes with all scr ews and the gibs. Compatibility This product works with the following mills: Cummins 7877 Mini Mill, Grizzly G8689 Mini Milling Machine, Harbor Freight 44991 Central Machinery Mini Mill/Drill, Hare& Forbes HM-10 Mini Mill Drill, Homier 03947 Speedway Mini Mill, Micro-Mark 82573 MicroLux Milling Machine,
|
|
|
Mini Mill X2 Electronic Controller Parts
Mini Mill X2 Electronic Controller Parts. Cam e off a working Harbor Freight 44991. So they are used but in good working condition.
|
|
|
ENCO #12437 MILL ATTACHMENT SET
ENCO#12437 set of attachment blocks and bolts for a mill. looks like its missing 1 small angle block on left side. Not sure how many nuts that came with set. As Is. Shipping is Not negotiable. We are closed on Monday and so is our local P.O.
|
|
|
Machinist tools - DoALL 1" Single end 2 flute End Mill
Single End 2 Flute 1" End Mill by DoAll. Please email with questions. See my other machining items also. Thanks. I will combine shipping- I ship in a priority mail flat rate box. Shipping is $6.00 for a small box or $12.50 for a medium box. Request an invoice after the auction and I will adjust the price based on which box is needed for your items.
|
|
|
Moore tools super precsision rotary table lrt for jig grinder or mill
Moore tools rotary table both horz/vertical useage. s/n lrt-45 in case with all tooling shown. Good used shape nice to use with jig grinder or milling machine
|
|
|
84" Cincinnati Hypro Vertical Boring Mill (#22985)
Reference#22985 84" Cincinnati Hypro Vertical Boring Mill(2) Vertical Rams Heads(1) Horizontal Side Head Table Diameter. 84" Max. Swing W/Side Head. 90" Max Height Under Rail. 70" Ram Stroke. 48" Table Speeds. 1.2-45 RPM Feeds. 002-500 IPR EQUIPPED WITH: Pendant Control(2) Left Hand Swivelling Ram(1) Right Hand Side Head Inspect Under Power In Facility! Contact for Machine Location.
|
|
|
CAT40 .1875" END MILL HOLDER
CAT40.1875" END MILL HOLDER EQUIPPED WITH: C40-18EM2- AVAILABLE: 6- WGT: PRICE: FOB BROOK PARK. OH- $ 39.50/EACH SUBJECT TO PRIOR SALE BT 7789 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT DE MAXWELL OR JOHN AT: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142 sales@mckeanmachinery.com
|
|
|
VALENITE CAT40 3/4" END MILL TOOL HOLDER
VALENITE CAT40 3/4" END MILL TOOL HOLDER EQUIPPED WITH: V40CT-E100- AVAILABLE: 2- WGT: PRICE: FOB BROOK PARK. OH- $ 39.00/EACH SUBJECT TO PRIOR SALE BT 7798 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT DE MAXWELL OR JOHN AT: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142 sales@mckeanmachinery.com
|
|
|
COMMAND CAT40 END MILL TOOL HOLDER
COMMAND CAT40 END MILL TOOL HOLDER EQUIPPED WITH: SERIAL: 148029- AVAILABLE: 2- WGT: PRICE: FOB BROOK PARK. OH- $ 39.00/EACH SUBJECT TO PRIOR SALE BT 7795 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT DE MAXWELL OR JOHN AT: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142 sales@mckeanmachinery.com
|
|
|
28 end mills mill tool machinist toolmaker tools
you get what you see except for the $1.60% used.40% unused approx.largest a 5/16"a few are carbide. I will combine shipping.$1 handling per auction on combined orders only.On combined orders I charge what it costs me to ship plus $1 handling per item) Connecticut buyers to pay 6.35% sales tax. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
CARBIDE SCRAP / SCRAP CARBIDE/END MILL/INSERTS/DRILL/ BIT USED CARBIDE 63 lbs
| | THIS AUCTION IS FOR 63lbs CARBIDE SCRAP/ SCRAP CARBIDE/END MILL/INSERTS/DRILL/ BIT USED CARBIDE SEE PHOTO FOR MORE INFORMATION U S A T R A N S A C T I O N S O N L Y Click to View Image Album Payment, I accept the following forms of payment: PayPal Shipping& Handling, $0.00 USA Shipping& Handling Terms& Conditions, WE WANT TO MAKE SURE YOUR TRANSACTION IS A FUN. SAFE AND A SUCCESSFUL EXPERIENCE. PLEASE READ THE FOLLOWING TERMS AND CONDITIONS OF THE PRODUCT OFFERING. ABSOLUTELY NO CONCESSIONS WILL BE MADE TO PRICE. SHIPPING PROVIDER OR PAYMENT TYPE. WE DO NOT CLOSE AUCTIONS EARLY. ALL SALES LISTED ON EBAY WILL BE COMPLETED THROUGH EBAY. BUYER AGREES TO PURCHASE EXACTLY WHAT IS STATED IN THE AUCTION. WE CANNOT BE HELD RESPONSIBLE FOR ITEMS ASSUMED TO BE INCLUDED IN THE AUCTION. ANY AND ALL QUESTIONS REGARDING ITEMS AT AUCTION ... moreMUST BE RESOLVED BEFORE BIDDING. WE WILL NOT BE HELD RESPONSIBLE FOR QUESTIONS NOT RESOLVED BEFORE AN AUCTION END. WE WILL NOT BE HELD RESPONSIBLE FOR BUYERS INABILITY TO INSTALL AND/OR USE EQUIPMENT DUE TO LACK OF KNOWLEDGE OR EXPERIENCE. ALL BIDS INDICATE THAT PRIOR TO BIDDING BUYER UNDERSTANDS: WHAT IS BEING SOLD. TERMS& CONDITIONS OF THE AUCTION, SUITABILITY OF PRODUCT FOR ITS PURPOSES. ALL NC RESIDENTS MUST PAY 6.75% SALES TAX WHEN CONTACTING US FOR ANY REASON PLEASE INCLUDE ITEM NUMBER FOR THE AUCTION YOU ARE REFERRING TO. BUSINESS HOURS: TUESDAY- SATURDAY 10-6 EST FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f91d615e7-0x105-
|
|
|
Machinist Tool Box Lot Tooling Steel Tool Carbide Mill Lathe Cutter assortment
Assorted machinist cutting tool lot. What you see is what you`ll get. I have other machinist tools listed now and in the coming days will have many more sales of these type tool lots. I can combine shipping = very heavy stuff. I don`t know anything about these tools. So check the pictures and see if you can use them. Everything is sold as seen. I may throw more into any given box lot as I come across similar items. Ships at cost. Thanks The small print Most items I sell are antiques. I inspect but don`t"doctor" up my parts, so most will need to be cleaned. The part(s) you see is the actual part you`ll get. Feedback is appreciated and always returned. I try to ship the same or next day after payment is received. Thanks Check out my!
|
|
|
Large grinding spindle mill? tool post grinder? used as is
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Large grinding spindle use it for a mill. Lathe, tool post grinder or some other shop project Collet is missing spindle spins smooth and free 10" long and 2 3/4" in diameter weighs about 10 lbs used condition S old AS IS. All sales final! Used the shipping calculator for shipping cost. Payment must be made within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. So if you do not intend to pay please do not bid! Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
|
|
|
Operators & Installation Manual for Bridgeport Series I Mill Z-775-2
You are bidding on Operators& Installation Manuals for Bridgeport Series I Mill Specifications Good Condition Good Condition: Item is free of any significant dents. Marks, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have dents. Marks, imperfections that do not impair the functioning of the item(unless specified in the description) Machines/Tools that cost above $500.00 please pay with credit card or wire transfer. We guarantee that the item purchased is packaged exceptionally well. Once it is picked up by a common carrier(UPS etc) we lose control over how the item is handled. If you receive an item and it(or the box) appears damaged. Do not sign or accept. If the item is left at your home or business, and you later find that it is damaged, take pictures ... moreand notify the carrier. inkfrogproseries. The machine/item is located in Bay Shore. NY 11706 Shipping costs to buyer location are not included with the machine price We can provide a freight quotation, buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required, we quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements, customer shipping method& machine design. Shipping can be confusing. Relatively inexpensive, but heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at info@sagmachinery.com or give us a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping.Upon arrival of your machine, unpack and immediately check for visible damage. Call Sag immediately– you will need to take pictures and email to info@sagmachinery.com. Make sure you note on BOL BEFORE the driver leaves. We accept paypal(info@sagmachinery.com)Or just give us a call at 1-800-334-0175 or 1-631-586-1768 with your credi
|
|
|
Sherline 2000 inch mill cnc
Up for bids is a Sherline 2000 inch Mill CNC. The XYZ axis has original Sherline CNC coupler's. Stepper motors are(2) Keiling KL23H 276-28-45(281oz) and(1) 381oz Stepper motor. Item is in perfect working condition there are some minor scratches on X table. Z axis column and the Y mill table is in near perfect condition. Sherline spindle motor and head stop was purchased new and barely used. The X& Y axis has zero backlash nuts installed. Z axis has original screws(no backlash nut) Installed on the Z axis. Column adapter was added for extended high travel. Zero adjustment dials are mounted to X& Y axis only(no dial for Z axis) Additional items included original Sherline mill clamps, T nuts, A2Z 1/8 end mill holder, and some original Sherline miscellaneous parts.see pics) Since I have updated to a different mill I have no use for ... morethis mill and have used some items for my other mill. All you need is computer. Motion controller, software, cables to get up and running. If any other questions email me. Winning bid pays for shipping. You'll need to contact me with mailing address so I can calculate shipping cost. I will not ship outside of continental U.S. Thanks for looking.
|
|
|
ANGLE PLATE VINTAGE MACHINIST TOOLMAKER 3 X3 IN GRINDER MILL!!
THIS AUCTION IS FOR A TOOLMAKER 3 INCH ANGLE PLATE WITH MACHINED SLIDE MOUNTING
|
|
|
CNC Shell Face Cat Mill Tool Holder milling machine arbor Jacobs
CNC Shell face Cat Mill Tool Holder.I do not know what this piece fits it came to me with no markings no packagin g or paperwork. lo oks like n ew being sold as use d because I really do not know a nything about it. Weight is 41 lbs 8-1/2" Dia. 1-7/16" thick 2" Center Pin 1" long. Blocks in slo t 1" wide. 4 Alan screws 5/8" 11 TPI From top of 8-1/2 plate to top top is 8-1/4" Top straight section dia. 2.355" x 1-3/4" Straight after taper is aprox 4-3/8" at bottom and aprox 2-3/8" at top Normal 0 false false false MicrosoftInternetExplorer4 Thank you for looking at this item.Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when beneficial. Be sure to view all pictures and ask any questions before you bid. I try to be very ... moreaccurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. Here at Bill’s Tools& Used Machinery we offer a Money Back guarantee No Questions Asked customer satisfaction is very important to us All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leave
|
|
|
28 end mill mills none carbide machinist toolmaker tools
you get what you see except for the $1.all used except for 2 or 3.largest 1"none carbide. I will combine shipping.$1 handling per auction on combined orders only.On combined orders I charge what it costs me to ship plus $1 handling per item) Connecticut buyers to pay 6.35% sales tax. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
BORING MILL,FALCON QUICK CHANGE , 6MT MASTER HOLDER, ENDMILL HOLDERS, ETC,NICE
6 MORSE TAPER MASTER HOLDER. FALCON KWIKLOK 6) END MILL HOLDERS 2) SHELL END MILL HOLDERS 1) 5 MORSE TAPER DRILL HOLDER 1) 4 JACOBS TAPER DRILL CHUCK HOLDER 1) DRILL CHUCK. JACOBS 16N BALL BEARING CHUCK ALL IN GOOD SHAPE NICE WORKING. LOCKS PROPERLY WILL SHIP UPS. BUYERS RESPONSIBILITY PLEASE READ SPECIAL CHECK OUT INSTRUCTIONS
|
|
|
Emco cnc mill milling tool lot vise cnc holders more
emco mill tooling lot very low price emco cnc mill vise emco cnc tool holders with collets(these sell for 80-130 each on ebay) all parts that you see free shipping to lower 48 states this lot is hard to find and low priced so don't miss out.
|
|
|
3 Axis Seiki CNC Vertical Knee Mill
3 Axis Seiki CNC Vertical Knee Mill. Equipped as follows: A) Miltronics Centurion Control B0 10" x 50" Table C) Variable Speed Drive(Manual Adjustment) D) 1 Shot Lube E) 30 Quick Change Spindle F) RS 232 Port G) 30 Quick Change Tool Holders H) 3 HP-220V-3PHS I) Have all books and manuals downloaded on flash drive.
|
|
|
LUCAS #41B-48 HORIZONTAL BORING MILL
LUCAS#41B-48 HORIZONTAL BORING MILL EQUIPPED WITH: SERIAL: 41B3305 3' HEAD TRAVEL NEWALL DP7 D.R.O. 84" SADDLE TRAVEL 48"W X 62"L TABLE OUTBOARD SUPPORT COOLANT PUMP/PAN 230/460 VOLTS Approximate weight 20.000 LBS Machine is currently in use and in production. We are selling due to replacement with a CNC horizontal boring mill. If arrangements are made for pick-up at the same time this machine is removed from service(any time during the month of July) Our riggers can load onto your truck for $400. If pick-up or delivery is required outside this time window, buyer will need to arrange his own rigger and truck. All shipping fees will be assumed by the buyer.
|
|
|
2007 TRAK #K3SX CNC MILL - PROTO-TRAK SMX CONTROL
PROTO TRAK CNC MILL- 10 X 50- PROTORAK SMX CONTROL YEAR- 2007- MODEL K3SX. EQUIPPED WITH PROTORAK SMX CONTROL, 3-AXIS ACU-RITE GLASS SCALES, SCALE FEEDBACK, KNEE POWER FEED, PROGRAM SPINDLE CONTROL, HALOGEN WORK LIGHT, CHIP PAN, FEATURES WAY SURFACE TYPE– DOVETAIL X. Z; SQUARE Y, CHROME HARDENED AND GROUND QUILL, MEEHANITE CASTINGS, SLIDE WAYS ARE TURCITE COATED, WIDE WAY SURFACES ARE HARDENED AND GROUND, SPECIFICATIONS TABLE SIZE: 50″ X 10″ MAXIMUM WEIGHT ON TABLE: 750 LBS, TABLE TRAVEL: 32″ SADDLE TRAVEL: 15.5″ KNEE TRAVEL: 16″ RAM TRAVEL: 24″ MAXIMUM QUILL TRAVEL: 5″ QUILL DIAMETER: 3-3/8″ SPINDLE TAPER: R8, SPINDLE MOTOR: 3 HP, SPINDLE SPEED RANGE. LOW: 400– 600 RPM, SPINDLE SPEED RANGE. HIGH: 300– 5,000 RPM, MAXIMUM RAPID FEED: 100 IPM, HEAD TILT: 45° FORWARD AND BACK. 90° LEFT AND RIGHT, CONTROL ELECTRICS: 110 VOLTS. 1 PH, ... moreMACHINE ELECTRICS: 220 VOLTS. 3 PH, 60 CYC, MACHINE WEIGHT: 2.816 LBS, MACHINE DIMENSIONS: 71″ LR X 59″ FB X 84″ H, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
MASTER MILL / PORTABLE MILLING MACHINE
MASTER MILL PORTABLE MILLING MACHINE STYLE G/ MODEL LC4-HF10-GT500 SPINDLE TAPER- 40 SPINDLE DRIVE- 3 HP 230/460/3/60 HEAD TRAVEL ON RUNWAY. MANUAL- APPROX. 50" HEAD CROSS TRAVEL. MANUAL- APPROX. 10" HEAD VERTICAL TRAVEL. MANUAL- APPROX. 10" APPROXIMATE MACHINE DIMENSIONS- 87"LR) X 33"FB) X 44"H) HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
2000 SWI PROTO-TRAK DPM3 CNC BED MILL - A.G.E. 3 CONTROL - TOOLING
SWI TRAK DPM 3 AXIS CNC BED TYPE MILL- AGE 3 CONTROL NEW- 2000/ MODEL DPM SPECIFICATIONS TABLE SIZE: 10” X 50” TABLE LOAD CAPACITY: 1.760 LBS. X-AXIS TRAVEL: 31” Y-AXIS TRAVEL: 17” Z-AXIS TRAVEL: 25” SPINDLE CENTER TO COLUMN FACE: 17.3" HEAD SWIVEL RIGHT AND LEFT: 90. QUILL FEEDS(3) 0.002. 0.004, 0.006 IPR. QUILL TRAVEL: 5" SPINDLE MOTOR: 3 HP. SPINDLE SPEED RANGE: 70– 4.200 RPM. SPINDLE TAPER: 40 NST. GENERAL MACHINE DIMENSIONS: 72” LR X 66” FB X 89” H. MACHINE WEIGHT: 4070 LBS ELECTRICS: 220 VOLTS. 3 PH, 60 CYC. EQUIPPED WITH MANUAL OR CNC OPERATION. TRAK AGE 3-AXIS CONTROL. POWER DRAWBAR. 8” KURT VISE. AUTO LUBE MISCELLANEOUS TOOLHOLDERS. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
5" DOOSAN Model: DB 130CX (With Extended Travel and Larger Table CNC Boring Mill
We are pleased to offer the following for your consideration: One used 5" DOOSAN Model: DB 130CX(With Extended Travel and Larger Table) CNC Table Type Horizontal Boring Mill New: 2008 SPINDLE DIAMETER. 5.12" SPINDLE SPEEDS(3 SPEED GEARED HEAD) 10 TO 2.500 RPM SPINDLE MOTOR. 35 HP SPINDLE TAPER. CAT 50 AUTOMATIC TOOL CHANGER. 90 POSITIONS SPINDLE TRAVEL(W-AXIS) 27.6" TABLE CROSS TRAVEL(X-AXIS) 157.5" VERTICAL TRAVEL OF SPINDLE(Y-AXIS) 78.7" COLUMN TRAVEL IN& OUT(W-AXIS) 63" BUILT IN ROTARY TABLE SIZE. 78.7" X 86.6" TABLE LOAD CAPACITY. 28.600 LBS TABLE INDEXING(B-AXIS) 360.000 POSITIONS APPROXIMATE FLOOR SPACE REQUIRED. 358" LR. 289" FB, 192" TALL APPROXIMATE MACHINE WEIGHT. 94.500 LBS EQUIPPED WITH: FANUC 18i-MB 5-AXIS CNC CONTROL* FULL B-AXIS 360.000 POSITIONING WITH CONTOURING* ... moreCHIP CONVEYOR* COOLANT THROUGH SPINDLE- 290 PSI* OPTIONAL LARGER 78.7" X 86.6" BUILT IN B-AXIS ROTARY TABLE* 90 POSITION AUTOMATIC TOOL CHANGER Only 6.000 Cutting Hours On Machine. Machine Will Be Available August 2013 Call For Price Delivered To Your Door. Price: $525.000.00 Video: Click picture for more views See this machine on our web site. SALES sales@pridemach.com Pride Machinery Sales. Inc TEL-631-586-5252 EMAIL:
|
|
|
Winslow bickford exactamatic hc drill grinder sharpner machine mill drill
You Are viewing On A Pre-Owned machine. Buyer pays freight shipping if needed. it is not free. Winslow Model HC Drill Grinder 1/16" to 1-1/2" Diameter 60 to 160 degree Drill Point Angle 9 Drill Holding Collets hold drills from.062 to.750 diameter Bellows Air Feed Attachment Dresser Accessories include:6 bushing index plates. Both collets and index plates in wood case(8) extra grinding wheels w/ 1) extra wheel mounting hub and balancing arbor Serial No. 940-00557-85 42" x 48" x 62"H Weight approx. 1200 LBS. The following mfg spec on this model are believed to be accurate and for your reference: Specification Description Drill Capacity 1/16" X 1.500" Drill Length 12" Travel 4" Horizontal Mounted Ultra Precision Point Concentric 0.0002" Point Drill Degrees Included Angles 60 To 140 Degree Grinding ... moreWheel Size 12" X 5" Grinding Wheel Width 3/4" Grinding Wheel Motor 3/4 Hp. Grinding Wheel Speed 1.800 Rpm's Work Head Motor 1/4 Hp Work Head Speeds 1.800 Rpm's Coolant Motor 1/8 Hp Coolant Tank 7-1/2 Gallon Coolant Yes Guards Yes Drill Holder Yes Dust/ Mist Collector Yes Drill Splitter Yes Drill Bushing Index Plates Yes Drill Holders With Collects Yes Grinding Wheel Built-In Cam Former Wheel Dresser Yes Self Contained Automatic Lubrication System Yes Point& Angle Can Be Varied By Work Head Angular Adjustment Yes Weight 1.200 Lbs. Condition Excellent ITEM COMES AS SHOWN IN PICTURE. And there is never anything included that is not shown or stated.
|
|
|
Hertel 3/8 Dia. 4 Flute TiN Coated Carbide End Mill TCE-11419M
Hertel 3/8 Dia. 4 Flute TiN Coated Carbide End Mill TCE-11419M 1 TCE11419M. 3/8 X 3/8 X 5/8 LOC 4FL TCE22. SE CC SQ END CARBIDE END MILL 05/04. In like new condition. Good Luck on your Bidding
|
|
|
Sherline Hobby Mill XY Bed Only
THIS SALE IS FOR A 10 INCH SHERLINE BED ONLY NOTHING ELSE. IS IN VERY GOOD CONDITION SOME VERY MINOR SCRATCH'S NO SCREWS NO OTHER ITEMS ARE INCLUDED JUST WHAT YOUR LOOKING AT.
|
|
|
Seco 3" Indexable Face Cutter CNC Mill 1500 RPM XNEX0806
Seco 3" Indexable Face Cutter CNC Mill 1500 RPM XNEX0806 Inserts not included Max 1500 RPM R220.96-04.00-08-11A C04011-I15 Shipping Weight: 3 lbs(ADY233 4.4.A L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. ... moreThis is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions reg
|
|
|
6" KURT MODEL 3620V MANUAL MILL VISE OPEN TO OFFERS!!!
USED VISE- KURT Model 3620V Versatile Lock-Vise includes a pair of soft jaws and a SPI Quickie vise handle in addition to the standard handle. The KURT Model 3620V Versatile Lock vise is the industry's ultimate single station CNC vise PLUS I WILL THROW IN EXTRA BLOCKS(Soft Block 4 TOTAL) Free Shipping. FOR MORE IN PLEASE CALL 727 600-3476
|
|
|
indexible end mill inserts indexing insert diamond shaped tools tool 35
you get what you see except for the $1.5 or 6 used.some damage on those.mostly 1" end to end.35 total. Connecticut buyers to pay 6.35% sales tax. I will combine.Handling$1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plous $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
indexible end mill 1" head approx indexing holder carbide insert tool
you get what you see except for the $1.used.3 3/8 by 3/4 shank.holds four 7/16 by 1/4" rectangular hole in center inserts.can't make out the mfg name on the shank. Connecticut buyers to pay 6.35% sales tax. I will combine.Handling$1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plous $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
MACHINIST TOOLS LATHE MILL Lot of Holokrome Cup Point Socket Set Screws Unusued
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.ZZA
|
|
|
Dulling machine parts for horizontal and verticle mill
Dulling machine Parts for Horizontal and Vertical Mill Bearing assemble for a horizontal mill looks good 8 inches wide the V’s are approx. 4 ¾. Other part is a holder for a milling machine or jig bore. Removal of items will be the responsibility of the buyer and there will be a removal deadline. Sold As Is– No Returns Sold with no reserve. No minimum. PayPal ONLY.
|
|
|
Cat 40 Taper Face Mill Holder with 4" dia Mitsubishi BF407R0406E carbide insert
Cat 40 Taper Face Mill Holder with 4" dia Mitsubishi BF407R0406E Carbide Insert Cutter ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3797-69-C THERE IS A $15.00 HANDLING INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
Daishowa seiki big spindle speeder increaser multiplier x4g mill milling machine
Daishowa Seiki big spindle speed increaser for milling machine. model x4g. 4 to 1 speed increase. comes in factory storage box. free shipping lower 48 states.
|
|
|
Yuasa big spindle speeder increaser multiplier x7g mill milling machine
Yuasa big spindle speed increaser for milling machine. model xg7. 7 to 1 speed increase. 3/4 straight shank will fit Bridgeport mills. item is in excellent condition with instructions. comes in factory storage box. free shipping lower 48 states.
|
|
 |