|
LOT OF 40EA CLECO SHEET METAL FASTENERS /AIRCRAFT TOOLS 5/32L
YOU BIDDING ON A USED 40EA CLICO.5/32L 1-1/8 GRIP. IN GOOD USABL CONDITION, PLEASE SEE THE PHOTOS FOR MOOR INFO AND P/N. IF YOU HAVE A QUESTION, PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES IS $13.00. I DO COMBINED SHIPPING
|
|
|
LOT OF 34EA CLECO SHEET METAL FASTENERS /AIRCRAFT TOOLS 5/16L 5/16EL
YOU BIDDING ON A USED 34EA CLICO. 16EA 5/16L 1-1/8 GRIP AND 18EA 5/16EL1-5/8GRIP. IN GOOD USABL CONDITION, PLEASE SEE THE PHOTOS FOR MOOR INFO AND P/N. IF YOU HAVE A QUESTION, PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES IS $8.00. I DO COMBINED SHIPPING
|
|
|
LOT OF 60EA CLECO SHEET METAL FASTENERS /AIRCRAFT TOOLS 1/4L 1/4
YOU BIDDING ON A USED 60EA CLICO. 30EA 1/4L 1-1/8 GRIP AND 30EA 1/4 5/8GRIP. IN GOOD USABL CONDITION, PLEASE SEE THE PHOTOS FOR MOOR INFO AND P/N. IF YOU HAVE A QUESTION, PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES IS $13.00. I DO COMBINED SHIPPING
|
|
|
Master Power Cooper Tools Pneumatic Panel Saw. Aircraft Aviation Sheet Metal.
This is a like new saw. It's lightly used. What you see pictured is what's included. Thanks. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13e1085002f-0xfa-
|
|
|
RIVET SQUEEZER Big "C" Yoke Squeeze AIRCRAFT Sheet metal TOOLs
BIG"C" Squeeze Yoke on a US114TC with Extra Large 960-HD"C" Yoke installed on it. The yoke alone is around $300 retail. This can be use like a normal squeezer or mounted to a table in the vertical position and used as a work station if you want. Just need to mount a bracket to your table is all. FREE SHIPPING in the US INTERNATIONAL is DISCOUNTED. For other Rivet squeezes and Blind Riveters see my other listings. Check out my! 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13e6db2e6d8-0xfe-
|
|
|
Aircraft sheet metal 401 shank rivet gun chisel tools Snap On ATI lot Used
I FOLLOW EBAY AND PAYPAL RULES AND GUIDE LINES FOR PAYMENT AND FILING NON-PAYING BIDDER CASES. I SHIP TO THE EBAY OR PAYPAL ADDRESS GIVEN. PLEASE INSURE IT IS CORRECT BEFORE PURCHASE. NO REFUNDS ON SHIPPING COST. DESCRIPTION:Aircraft sheet metal 401 shank rivet gun chisel tools Snap On ATI lot Used. This is a lot of damaged or modified 401 shank rivet gun tools. If you look at the first two photographs. Everything to the left of the ruler is Snap On brand, the two to the far left are PH64. A few of the rivit chisels show little use, and the other rivet chisels are usable. The rest is included for making tools. This is a used lot of 401 shank rivet gun tools, They are from different makers, and different styles, some will be the same sizes. What is shown is what is included. These were from my tool box, Some I bought new some I bought used, ... moreall have had a name or number removed showing a bare spot as seen in the photos. A few have never been used, but were still engraved. Specifications: International Buyers are responsible for paying all import duty. Tax, and fees which may be collected by their country when the parcel arrives. To avoid misunderstanding, we declare the exact purchase price as the value of the goods when completing the customs declaration. We will neither check the"gift" box nor under declare the value. Please keep in mind. Because of Ebay's new item conditions: Items listed as new are new, but not all items are in packages like you find at Walmart. I will not ship an item in a unopened package, I need to make sure it is not damaged before listing it and shipping it to you. Alot of my items are in plain brown boxes. If the box is not shown assume it is not included or is just a plain box. Please make sure this is correct for you application. I do my best to describe items as accurately as possible. So please ask questions. I list alot of items and I am not always sure what they will fit. When I use the terms: May. Should, or I think, or other verbage along those lines, That means I a
|
|
|
LOT OF 50EA CLECO SHEET METAL FASTENERS /AIRCRAFT TOOLS 1/4
YOU BIDDING ON A USED 50EA CLICO. 1/4 5/8GRIP. IN GOOD USABL CONDITION, PLEASE SEE THE PHOTOS FOR MOOR INFO AND P/N. IF YOU HAVE A QUESTION, PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES IS $13.00. I DO COMBINED SHIPPING
|
|
|
LOT OF 62EA CLECO SHEET METAL FASTENERS /AIRCRAFT TOOLS 5/16L 5/16EL
YOU BIDDING ON A USED 62EA CLICO. 45EA 5/16L 1-1/8 GRIP AND 17EA 5/16EL1-5/8GRIP. IN GOOD USABL CONDITION, PLEASE SEE THE PHOTOS FOR MOOR INFO AND P/N. IF YOU HAVE A QUESTION, PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES IS $10.00. I DO COMBINED SHIPPING
|
|
|
aircraft aviation sheet metal hand tools,clecos 4 different sizes 80 pcs.
one lot(80) plus wrench clecos i have 20 for a 1/8 inch hole-20 for a3/32 inch hole-20 for a 3/16th inch hole 20 for a 5/32 inch hole plus wrench 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13ea2f0d30f-0xfe-
|
|
|
LOT OF 70EA CLECO SHEET METAL FASTENERS /AIRCRAFT TOOLS 5/32L
YOU BIDDING ON A USED 70EA CLICO.5/32L 1-1/8 GRIP. IN GOOD USABL CONDITION, PLEASE SEE THE PHOTOS FOR MOOR INFO AND P/N. IF YOU HAVE A QUESTION, PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES IS $13.00. I DO COMBINED SHIPPING;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ef2fd3a1d-0x107-
|
|
|
USED AVIATION SHEET METAL SHEARS AIRCRAFT TOOLS INDUSTRIAL TOOL METAL WORKING
USED SET OF AVIATION SHEET METAL SHEARS Set Contains. One straight Cut, One Left Cut And One Right Cut Shears They Could Use A Good Cleaning. For They Do Have Some Light Rust A Must Have For Doing Any Kind Of Sheet Metal Work
|
|
|
Lot of Sheet Metal Aircraft Tools;Aviation, Rivet Cutter, Skin Wedge, Rivet Fan
This Lot of Tools Includes: Rivet Cutter· This heavy-duty cutter is designed to quickly and easily shear aluminum rivets. Cuts diameters of 3/32" 1/8" 5/32" 3/16" 7/32" and 1/4" Adjustable for 1/4" to 3/4" long rivets in 1/16" increments. 2 Chips Chasers· Designed for removing chips and burrs between sheets after drilling rivet holes. Each chaser features a plastic molded handle and flexible steel blade with hook on the end. Blades are 5 1/2" and 2 1/2" long. SkinWedge Use this tool to separate 2 pieces of material. Overall Length:7" Width: 1" Body Thickness:1/4" 10 Hole Rivet Fan· Accordion style tool maps out and spaces rivets easily and with great accuracy. Capable of variable adjustment from 1/2" to 2" spacing in 1/4" increments. 4” Circle ... moreCutter· Excellent for cutting circles in sheet metal. Brass, copper, soft steel, aluminum, plastic, wood and composite materials. 1/4"diameter high-speed drill bit· Range: 7/8" 4" Please do not hesitate to contact me with any questions. I will make every effort to ship within 1 business day of payment. I ship all of my items USPS Priority Flat Rate Shipping. Please leave feedback about your experience buying from me and your item. I am a new seller trying to build an excellent reputation in the eBay community. Therefore. I will make every effort to ensure you are fully satisfied with your purchase. Note: This item is used. But it is fully functional. Pictures have been taken to provide the most accurate depiction of the item's condition. This item may or may not contain etchings, corrosion, rust, paint, etc.
|
|
|
40 Wingnut Draw Clecos; Aircraft Tools, Aviation, Sheet Metal, Riveting, Rivet
Lot of 40 Wingnut Draw Clecos: 10- 3/32(40) 10– 1/8(30) 10- 5/32(21) 10– 3/16(10) All Clecos have a 0-1” Range Please do not hesitate to contact me with any questions. I will make every effort to ship within 1 business day of payment. I ship all of my items USPS Priority Flat Rate Shipping. Please leave feedback about your experience buying from me and your item. I am a new seller trying to build an excellent reputation in the eBay community. Therefore. I will make every effort to ensure you are fully satisfied with your purchase. Note: This item is used. But it is fully functional. Pictures have been taken to provide the most accurate depiction of the item's condition. This item may or may not contain etchings, corrosion, rust,paint, etc.
|
|
|
Sioux Air Rivet Hammer # 720 Aircraft Auto Body Sheet metal Air Tools
Sioux air hammer riveter# 270 good working order
|
|
|
Sioux Air Drill 3/8 Chuck 2600 rpm Aircraft Auto Body Sheet metal Tools
Sioux air drill 2600 rpm chuck 1/16' 3/8' good working order
|
|
|
Sheet Metal Shears and Adel Nibbler; Aircraft Aviation Tools, Cutter, Nipper
This Set Includes: Irwin Brand 10" Tin Snips For cutting straight lines. Patterns, and smooth, tight curves in either direction. Adel® Nibbling Tool Hand operated nibbler is used for cutting holes. Notching, and trimming. Cut any shape or size hole by starting with a 7/16" hole. Capacities are up to 18-gauge steel, and 16-gauge aluminum, copper, or plastic. Companion Brand 3 Piece Aviation Snip Set Includes: Left. Right& Straight Cuts. Please do not hesitate to contact mewith any questions. I will make every effort to ship within 1 business day of payment. I ship all of my items USPS Priority Flat Rate Shipping. Please leave feedback about your experience buying from me and your item. I am a new seller trying to build an excellent reputation in the eBay community. Therefore. I will make every effort to ensure you are fully ... moresatisfied with your purchase. Note: This item is used. But it is fully functional. Pictures have been taken to provide the most accurate depiction of the item's condition. This item may or may not contain etchings, corrosion, rust, paint, etc.
|
|
|
Aviation aircraft sheet metal drill angle grinder air tools
Set of aviation sheet metal air tools. 3 angle grinders. A straight grinder, a cut off wheel, and a Ingersol Rand 3/8" drill. All tools are in great working condition and well cared for! I AM MOVING TO PERU. SO EVERYTHING MUST GO. PLEASE HELP ME OUT BY CONSIDERING THIS PURCHASE. It would be much appreciated! There is a Ingersol Rand 3/8" 2800 rpm drill. I was a sheet metal tech on aircraft for 12 years, and this is by far my favorite drill. This drill is so smooth, quiet and rugged! One of the sweetest drills and trigger out there. Even IR doesn't make them like this anymore! It is in excellent working condition, well cared for and regularly oiled. A Pan American Nova Systems angle grinder. Pan Am makes an high quality industrial grade tool. And they have excellent support. This is a smooth, quiet running grinder. A Husky cutoff ... moretool A Mac Tools straight grinder And a cheaper Ingersol Rand angle grinder. I would be willing to break up the set if someone is interested. Please feel free to contact me if you have any questions. Thanks for considering this. It would help me!
|
|
|
Big Bore .498 Shank Rivet Set - USA - Aircraft Sheet Metal Tools
Big Bore Rivet Set- All are.498 shank- Reads: SM70-45510/45612- 3.5" long- All are in very good useable condition- The sets you receive may not be the ones pictured but will be in similar condition. If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
ATI Rivet Punch Set Lot 5/16" 1/4" 3/16", 5/32" 1/8" Aircraft Sheet Metal Tools
ATI Rivet Punch Set Lot- 401 Shank- Model: AT141A(5/16.1/4, 3/16, 5/32, 1/8) All are very clean. All are straight as an arrow. If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
5/32 Threaded Drill Bushing - Aircraft/ Sheet Metal Tools
Threaded Drill Bushing- Inside diameter- 5/32- Diameter of threaded section- 1/2" Because we have many of these. The one you receive may not be the one pictured. It will be the same size and in similar cosmetic condition. If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Small Drill Bushing Cup - Aircraft/ Sheet Metal Tools
Drill Bushing Cup- Takes bushings with 3/8" thread Because we have many of these. The one you receive may not be the one pictured. It will be the same size and in similar cosmetic condition. If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
4 Piece Drill Bushing Set - Large Bushing Cup - Aircraft - Sheet Metal Tools
4 Piece Drill Bushing Set- 1 bushing cup- 3 threaded drill bushings- 9/32- 25/64- 5115* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
AIRCRAFT TOOLS 11 PIECE COGSDILL SHEET METAL MACHINIST TOOLS
FRESH FROM ESTATE AUCTION LOT OF 11 COGSDILL AIRCRAFT TOOLS I DONT KNOW WHAT EVERYTHING IS CALLED.
|
|
|
#3 Threaded Drill Bushing With Bushing Cup - Aircraft Sheet Metal Tools
Threaded Drill Bushing With Bushing Cup- Bushing =#3- Excellent condition* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Semco Sealant Gun Model 850 Aircraft Auto Marine Sheet Metal Avionics Air Tools
Hand Semco model 850 Sealant Gun Great for travel. In the field or no air supply Like new
|
|
|
25 Monogram Aerospace Side Grip Clecos Sheet Metal Edge Clamps Aircraft Tools
Monogram Aerospace Sheet Metal Edge Clamps Made in USA 25pc- 1/2” Monogram Clamps Clamps have about 1/2” grip. Good working Condition. Designed for sheet Metal Work but good for many projects. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-143216bc967-0x101-
|
|
|
20 Monogram Aerospace Side Grip Clecos Sheet Metal Edge Clamps Aircraft Tools
Sheet Metal Edge Clamps 20pc- 1” Monogram Aerospace Clamps Clamps have about ¾” grip. Good working Condition. Designed for sheet Metal Work but good for many projects.
|
|
|
26 Piece Drill Bushing Set - Drill Bushing Cup - Aircraft - Sheet Metal Tools
26 Piece Drill Bushing Set- 13 bushing cup- 13 threaded drill bushings- 5270- 4646- 4488- 27/64- 25/64- 3858- 3710- 3228- 2915- 1- 3- 21- 5/32 I have many bushings an cups. The set you receive may not be the one pictured but the sizes will be the same. The cups will be in good condition and each will be labeled by size. If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
15 Monogram Aerospace Side Grip Clecos Sheet Metal Edge Clamps Aircraft Tools
Sheet Metal Edge Clamps Made in USA 15pc- 1” Monogram Aerospace Clamps Clamps have about ¾” grip. Good working Condition. Designed for sheet Metal Work but good for many projects.
|
|
|
ROCKWELL AIR DRILL 2800RPM 1/4 CHUCK SHEET METAL AIRCRAFT TOOLS
ROCKWELL AIR DRILL Aircraft sheet metal drill. Drill has been disassembled cleaned and reassembled with syn grease and air oil for air rotor. Its in great working condition. Has 2800 rpm transmission installed. Great buy for sheet metal techs. COMES WITH EITHER STANDARD 1/4 JACOBS CHUCK OR 3/8 KEYLESS CHECK. CAN HAVE BOTH FOR $10.00 MORE. ANY QUESTIONS PLEASE ASK.
|
|
|
aircraft aviation tools rivet buzz gun snaps sheet metal work
Aviation riveting tool. Buzz gun, working order with some snaps, atlas of Sweden brand, classic car/aircraft restoration? Low start no reserve Posted with
|
|
|
AVIATION SHEET METAL 12" TIN SNIPS AIRCRAFT MECHANIC'S TOOLS SHEET METAL TOOLS
These are very lightly used 12" tin snips that are in excellent working condition. They do not have a name stamp on them and look to have sharp blades. Nice blue vinyl on the handles. Please see the photos for further description. Paypal payments accepted. Payment due within 4 days of auction ending. Unless othwise requested! Ebays Unpaid item Assist will automatically open a case after 14 days. To avoid this. Pay or cancel your purchase before UPI closes the case. Ships out Fast. Usaully within 1 business day- I insure all Items over $100- We do combine shipping upon request. Must request before payment! If requested after payment only partial refund ddo to ebay charging on shipping fees! ALL SALES ARE FINAL. UNLESS THERE WAS A PROBLEM WITH THE WAY THE ITEM WAS LISTED OR DESCRIBED. 14 day money back return policy. If your happy with ... moreyour purchase please leave a 5-star feedback or Contact us to Resolve any Issues. WE HAVE BEEN SELLING ON EBAY FOR MANY YEARS. THIS IS A NEW ACCOUNT FOR US! WE STRIVE TO DESCRIBE EVERYTHING AS ACCURATE AS POSSIBLE. MOST ITEMS ARE USED, UNLESS OTHER WISE STATED. IF THERE IS A PROBLEM PLEASE CONTACT US FIRST BEFORE LEAVING FEEDBACK! WE WOULD LOVE TO RESOLVE THE PROBLEM FIRST! THANK YOU! LONG TIME eBAY SELLER. WITH KNOWLEDGE OF CUSTOMER SACTISFACTION! STARTING A NEW VENTURE WITH A NEW ACCOUNT! DOING THE BEST WE CAN TO PROVIDE QUILITY USED TOOLS, AND ANYTHING ELSE WE CAN FIND, TO NEW OWNERS! The Best way to contact us is through eBay Messages with any questions or concerns. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-144b0a4d2f5-0xe3-
|
|
|
AMERICAN PNEUMATIC TOOL/ APT-650 AIRCRAFT TOOLS / SHEET METAL SHEAR / TRIMMER
This is in good working condition. Blades in good condition. This tool has a lot of power packed into a small unit and cuts metal amazingly. This tool is awesome for sheet metal techs. Great time save for doing quick trims and tab cutter. No trips back to the shear. Any question please ask. I sell for aircraft techs at a low cost and great tools. Not to make a big profit like the others guys. Purchase from some who is an A&P IA who knows what its like to buy the high dollar tools. I purchase low and share with the community. Specifications: Shearing Capacity 1/16" Steel or 3/32"Alum. 90 psi Max. Throat Opening: 1/8" x 3" Shearing Force: ft.lbs. Weight: lbs. Overall Dimensions: 6 3/4" High x 4 3/8" Wide x 8 5/8" long Air Inlet Thread: 1/4" NPT The light weight compact model 650 tab shear features ... morecomplete portability. Trimming and shearing operation can be done on the job site safely. Quickly, cleanly, and efficiently with this precision tool. You, can rapidly shear router tabs from aluminum, steel, titanium, and stainless steel as well as utilize it for other similar trimming and shearing jobs. This powerful tool features finger tip operation. The trigger valve button is insert to prevent accidental actuation. Replaceable Shear Blades Heavy Duty Construction Heat Treated Steel Parts Anodized Aluminum Parts Light Weight Four Cutting edges Precisely balanced for easy handling
|
|
|
6 CUTTING, MILLING HEAD, METAL LATHE, BRIDGEPORT, CUTTER SHEET, AIRCRAFT TOOLS?
6 CUTTING. MILLING HEAD, METAL LATHE, BRIDGEPORT TOOLS? THESE LOOK TO ME TO BE VERY LIGHTLY USED. PLEASE VIEW PHOTO'S, WHAT YOU SEE IS WHAT YOU GET) I DON'T KNOW HOW TO CORRECTLY DESCRIBE AND LIST THESE METAL CUTTING TOOLS. PLEASE SEE PHOTO'S AND DESCRIPTION ALONG WITH NUMBERS THAT ARE STAMPED ON THE TOOLS. stampings and measurements: 1-MM280-9L 3/4 X 3/8; MY APPROXIMATE MEASUREMENT. OVERALL LENGTH 5/8" cutting head diameter 3/4" 1-MM280-7K 5/8 X 1/4; MY APPROXIMATE MEASUREMENT. OVERALL LENGTH 5/8" cutting head diameter 5/8" 1-MM280-5B 1/2 X 1/4; MY APPROXIMATE MEASUREMENT. OVERALL LENGTH 5/8" cutting head diameter 1/2" 1-MM280-4B 7/16 X 3/16; MY APPROXIMATE MEASUREMENT. OVERALL LENGTH 5/8" cutting head diameter 7/16" 1-MM280-SP9/16 X 1/8; MY APPROXIMATE MEASUREMENT. OVERALL LENGTH 5/8" ... morecutting head diameter 9/16" SOME VERY LIGHT SURFACE RUST OR STAINING ON AROUND OUTSIDE) 1-MM280-6SP 9/16 X 3 32; MY APPROXIMATE MEASUREMENT. OVERALL LENGTH 5/8" cutting head diameter 9/16" We do combine Shipping& Handling charges(combining Shipping& Handling charges for U.S. shipments) We use the heaviest item at full S&H and then discount each additional item's S&H charge by 50 percent and add it to the first S&H charge. You can also just send us a message for a quote) combining Shipping& Handling charges for International shipments) We combine shipping and handling by totaling all of the item weights. Item weight: 9 ounces Our maximum value per package for international locations is $50.00 with the exception of the U.K. And Germany. Our maximum value per package for the U.K. and Germany is $25.00 International bidders must pay by PayPal. shipping will be calculated at the end of auction and added to the invoice International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs offi
|
|
|
2 COUNTERSINK CR tools bit metal mill pilot threaded shank cutter sheet aircraft
2 COUNTERSINK CR tools bit metal mill pilot threaded shank cutter sheet aircraft(THESE LOOK TO ME TO BE VERY LIGHTLY USED. IF USED AT ALL, PLEASE VIEW PHOTO'S, WHAT YOU SEE IS WHAT YOU GET) stampings and measurements: 2-5/8 X 100 X.243 CRVERALL LENGTH 1 9/16" Cutting head diameter 5/8" PILOT ON TOP IS 1/4" DIAMETER We do combine Shipping& Handling charges(combining Shipping& Handling charges for U.S. shipments) We use the heaviest item at full S&H and then discount each additional item's S&H charge by 50 percent and add it to the first S&H charge. You can also just send us a message for a quote) combining Shipping& Handling charges for International shipments) We combine shipping and handling by totaling all of the item weights. Item weight: 9 ounces Our maximum value per package for international ... morelocations is $50.00 with the exception of the U.K. And Germany. Our maximum value per package for the U.K. and Germany is $25.00 International bidders must pay by PayPal. shipping will be calculated at the end of auction and added to the invoice International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Packages over $25.00 in value can take extra time to clear some countries customs offices. This is due to the extra process of collecting duties and taxes on certain items. Please understand your countries customs process and understand that this can increase the delivery time from what would normally take 2 to 3 weeks may take 5 to
|
|
|
5 COUNTERSINK CR tools bit metal mill pilot threaded shank cutter sheet aircraft
5 COUNTERSINK CR tools bit metal mill pilot threaded shank cutter sheet aircraft(THESE LOOK TO ME TO BE VERY LIGHTLY USED. WHAT YOU SEE IS WHAT YOU GET) stampings and measurements: 2-04518-811 132 CR OVERALL LENGTH 1 9/16" Cutting head diameter 5/8" 1-04518-811 12? CRAIG(THE LAST NUMBER IS SHOWING ONLY THE TOP THAT APPEARS TO BE A"1" OVERALL LENGTH 1 9/16" Cutting head diameter 5/8" 1-04518-811 120 CR OVERALL LENGTH 1 9/16" Cutting head diameter 1/2" 1-04518-811 129 CR#10 100 ° OVERALL LENGTH 1 9/16" Cutting head diameter 1/2" We do combine Shipping& Handling charges(combining Shipping& Handling charges for U.S. shipments) We use the heaviest item at full S&H and then discount each additional item's S&H charge by 50 percent and add it to the first S&H charge. You ... morecan also just send us a message for a quote) combining Shipping& Handling charges for International shipments) We combine shipping and handling by totaling all of the item weights. Item weight: 9 ounces Our maximum value per package for international locations is $50.00 with the exception of the U.K. And Germany. Our maximum value per package for the U.K. and Germany is $25.00 International bidders must pay by PayPal. shipping will be calculated at the end of auction and added to the invoice International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Packages over $25.00 in value can take extra time to clear some countries customs
|
|
|
5/16 Drill Bushing Cup Slip Bushing Cup - Aircraft/ Sheet Metal Tools
Drill Bushing Cup Inside slip collar is steel and is made to accept slip bushings with a 5/16" outside diameter. Used- Very nice condition* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Aluminum Drill Bushing Block With 9 Bushings - Aircraft - Sheet Metal Tools
Bushing Block With Bushings- Block is made of aluminum- Accepts bushings with 3/4" threads- 9 threaded drill bushings- 5270- 4646- 4488- 27/64- 25/64- 3858- 3710- 3228- 2915* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Aircraft Sheet Metal Deburring Tools
Up for consideration are three separate sheet metal deburring tools to include carbide four-sided. Pivot blade and surface hand file for smooth finish. Thanks for looking.
|
|
|
Desoutter AIR DRILL 1/4 IN CHUCK 3000 RPM AIRCRAFT SHEET METAL AIRCRAFT TOOLS
Desoutter drill in good working condition. never used one before but seems to be well built. I disassembled cleaned and insp. reassy with synthic grease mobil grease. 3000 rpm Any questions please ask.
|
|
|
Jiffy AIR DRILL 3/8 CHUCK 300 RPM AIRCRAFT TOOLS SHEET METAL TOOLS.
Jiffy air drill with 3/8 chuck 300 rpm. Drill is in great shape and works great. I disassembled cleaned inspected and reassembled with Mobil synthic grease. Any questions please ask
|
|
|
Rockwell Hi-speed PNUMATIC AIR DRILL 18000 rpm SHEET METAL TOOLS AIRCRAFT TOOLS
This is a Rockwell air drill all I can say is wow. High speed for sure 18000 rpm. I like this gun have one in my tool collection. This drill is in awesome shape almost new. From Boeing surplus. I have disassembled cleaned and inspected drill. Reassy with synthic grease for long lasting operation. I sell for AIRCRAFT techs and mechanics at a decent price. Buy from someone who has worked the floor and gives a good review of tool operations. Any questions please ask
|
|
|
120 Piece Drill Bushing Set - Drill Bushing Cup - Aircraft - Sheet Metal Tools
120 Piece Drill Bushing Set- 60 bushing cups- 60 threaded drill bushings(Most are made by Magnavon. Carr Lane& ATI) All cups have been inspected and none appear to be cracked or modified. A set of this size will not come around very often. Especially at $5.00 per piece. Sizes from large to small: 5270.5115.4646.4488.4375(7/16) 4219(27/64) 4040(Y) 3906(25/64) 3858.3750(3/8) 3720.3710.3438(11/32) 3386.3281(21/64) 3228.3125(5/16) 3090.2969(19/64) 2915.2830.2813.2812(9/32) 2656(17/64) 2605.2570(F) 2500(1/4) 2460(D) 2344(15/64) 2340(A) 2280(1) 2188(7/32) 2130(3) 2055(5) 2031(13/64) 2001.1990(8) 1975.1935(10) 1910(11) 1895.1890(12) 1875(3/16) 1860.1850(13) 1770(16) 1719(11/64) 1660(19) 1635.1620.1610(20) 1590(21) 1562(5/32) 1520(24) 1495(25) 1440(27) 1406(9/64) 1400.1285(30) 0980(40) If you purchase this item and are unsatisfied for any reason. ... moreYou may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
1x Rivet Gun Chicago Pneumatics Aircraft Tools Sheet Metal Tools
Here is an awesome Chicago Pneumatics 1x Rivet gun in good working condition. I have cleaned and inspected gun. Reassy with synthic air tool oil. Any questions please ask. I have got a bunch of different guns.
|
|
|
Wedgelock Draw Cleco Runner Nut Runner Aircraft tools Sheet Metal Tools
Here is a wedgelock Draw Cleco Runner/ nut runner tool. Its in good working condition. It has been insp and cleaned. Reassy. With synthic grease and air oil. Makes your job a whole lo easier when. Using draw clecos.
|
|
|
Jiffy 90 degree drill 250 RPM 5/16 threaded head Aircraft Tools Sheet Metal
90 Degree Jiffy Drill with 5/16 threaded head. In good working condition. Inspected and cleaned drill. Reassy. With synthic grease and air oil.
|
|
|
ROCKWELL 90 DEGREE AIR DRILL 6500 RPM AIRCRAFT TOOLING SHEET METAL TOOLS !!!!
Here is a 90 degree Rockwell air drill in great working condition. I have disassembled cleaned insp and reassy with synthetic air oil and grease. 6500 rpm Any questions please ask.
|
|
|
BF Goodrich C 362 Air Rivnut Header installer Aircraft tooling sheet metal tools
Here is a BF Goodrich c 362 pneumatic rivnut installer. Its in working condition. The center screws turns into the rivnut. It will pull rivnuts from#10 bolts to 1/2 in and m5 bolt size to M 12 bolt size. All I can say is wow awesome power in one tool and rare. Tool will come with operations manual and maintenance parts manual. Any questions please ask.
|
|
|
APT 3X RIVET GUN 300 Jiffy AIRCRAFT TOOLING AIRCRAFT SHEET METAL TOOLS !!!!!!
Here is a 3x rivet gun. I have disassembled cleaned and insp. Reassy with synthic air oil for long lasting only operation. Apt was a great tooling company they made a lot of different aircraft tools. I have used many of them and they last forever. This the exact gun I use for riveting. I like the feel to it. Any questions please ask. I sell tools for aircraft mechanics at a decent price and I am an A&P IA so any questions or need reviews please ask. I have used most any tool I sell.
|
|
|
APT 8X RIVET GUN 400 Jiffy AIRCRAFT TOOLING AIRCRAFT SHEET METAL TOOLS !!!!!!
Here is a 8x rivet gun. I have disassembled cleaned and insp. Reassy with synthic air oil for long lasting only operation. Apt was a great tooling company they made a lot of different aircraft tools. I have used many of them and they last forever. This the exact gun I use for riveting. I like the feel to it. I have painted this gun with no slip paint like mine and makes it nice for better gripping. Takes.500 rivet sets Any questions please ask. I sell tools for aircraft mechanics at a decent price and I am an A&P IA so any questions or need reviews please ask. I have used most any tool I sell.
|
|
|
ATI (Snap On Tools) 1/4 Rivet Set AT100A-2-1/4 USA Made Aircraft Sheet Metal
ATI Rivet Set- 401 Shank- AN470- For 1/4 rivets- 2.5" overall length- Model: AT100A-2-1/4- Good condition* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Cleco 1/4" air drill 7000 RPM AIRCRAFT TOOLS / SHEET METAL TOOLS / SNAKE SKIN!!
This is a dresser/ cleco pneumatics air drill surplus from Boeing. The drills are in really good shape and have a great feel in your hand. Has nice smooth trigger control. I have disassembled cleaned and inspected the drill and reassembled with syn grease. 7000 rpm at your finger tips and built in the USA. Its been coated in snake skin print and clear coat with poly urethane. It's durable and cool as hell. I can also do other tools in other dips films. Camo skulls zombie carbon fiber snake skin whatever. It holds up pretty good to. Message me if you interested. Any drill rivet gun whatever can be coated. I am an AP IA and I sell tools for aircraft mechanics at a decent price Any questions ask. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-145bf86a619-0x116-
|
|
|
Rockwell AIR DRILL 9000 RPM 1/4 CHUCK / SHEET METAL AIRCRAFT TOOLS CAMO COATED!
Here is a Rockwell drill with 9000 rpm. Drills has been disassembled cleaned and inspected. Works really good. Its been coated in CAMO print and clear coat WITH POLY URETHANE. Its durable and its a awesome looking drill in this print. I can also do other tools in other dips films. Camo skulls zombie carbon fiber snake skin whatever. It holds up pretty good to. Message me if you interested. Any drill rivet gun whatever can be coated. I am an AP IA and I sell tools for aircraft mechanics at a decent price Any questions ask. Any questions please ask.
|
|
|
Rockwell AIR DRILL 1850 RPM 1/4 CHUCK AIRCRAFT TOOLS SHEET METAL TOOL SNAKE SKIN
Here is a Rockwell Air drill with 1850 rpm gear box installed. I have disassembled cleaned and insp. Reassy with synthetic air oil for long lasting only operation. Its in great working condition. If you like Rockwell drill this is a great buy. Any questions please ask. Its been coated in snake skin print and poly urethane clear coat. its very durable. I can also do other tools in other dips films. Camo skulls zombie carbon fiber snake skin whatever. It holds up pretty good to. Message me if you interested. Any drill rivet gun whatever can be coated. I am an AP IA and I sell tools for aircraft mechanics at a decent price Any questions ask.
|
|
|
DOTCO SMALL AIR DRILL 1/4 CHUCK 1000 RPM AIRCRAFT TOOLS SHEET METAL CARBON FIBER
Here is a nice dotco small air drill with 1000 rpm. It has nice trigger controls and a real nice feel in your hands. Weight of drill is decent as well. I have disassembled cleaned and insp. Reassy with synthetic air oil and grease for long lasting only operations. A keyless chuck is also available for install for 20$ extra. Mini 1/4 or 3/8 chuck. Comes with 1/4 Jacobs chuck. Its been coated in carbon fiber print and clear coat. its a bad to bone looking drill in this print. I can also do other tools in other dips films. Camo skulls zombie carbon fiber snake skin whatever. It holds up pretty good to. Message me if you interested. Any drill rivet gun whatever can be coated. I am an AP IA and I sell tools for aircraft mechanics at a decent price Any questions ask. Any questions please ask.
|
|
|
CARBON FIBER COATED Dotco air drill 1300 rpm aircraft tools sheet metal tools!!!
Here is a Dotco air drill in great condition. 1300 rpm 3/8 chuck. In Awesome shape. Great drill built well. These dotcos great to use for slightly fast speed but not to fast. Has good power for drill harder alloy but not fast to burn up your bits. I have disassembled cleaned and insp drill and reassy. With synthetic grease. Its been coated in carbon fiber print and clear coat. its a bad to bone looking drill in this print. I can also do other tools in other dips films. Camo skulls zombie carbon fiber snake skin whatever. It holds up pretty good to. Message me if you interested. Any drill rivet gun whatever can be coated. I am an AP IA and I sell tools for aircraft mechanics at a decent price Any questions ask.
|
|
|
Atlas Tools - Cylindrical Aircraft Cleco Runner Sheet Metal Tool - 2100 RPM CBX
Be sure to check out all our other high quality tool auctions too. Up for sale here is a Atlas Tools- Cylindrical Aircraft Cleco Runner Sheet Metal Tool- 2100 RPM in used condition. This is a used aircraft tool does have wear but tested strong nice shape and does have owner marks take a look. This item retails new for much more so get it here and save a ton. You get the pictured tool take a look. It will be packaged well and shipped out fast so bid with confidence. Thanks for looking and be sure to check out all my other auctions. Happy Bidding.
|
|
|
aircraft tools, Sheet metal,Pneumatic tools,machinist tools, Sioux,
Sioux Tools MODEL 10T2108Q Professional Serial SKCC Sioux City. Iowa Aircraft tools All Questions welcomed Will combine shipping when possible if you purchase more than one item. Please email me for combined shipping Payment with in 5 calendar days after auction ends is expected USA shipping only Please look at my other auctions for more fine tools Thanks for looking
|
|
|
Zephyr cage micro stop sheet metal aviation,aircraft tools 5/16 shank (#1)
UP FOR BID IS A Zephyr cage micro stop sheet metal aviation.Aircr aft tools 5/16 shank. ALONG WITH THE MICRO STOP COMES 4(some used or new. But all sharp) 1/4-28 Threaded Countersink- 40. 30, 21, 11, Pilots- Aircraft Sheet Metal Tool Will combine shipping when possible. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14622157ecf-0x102-
|
|
|
ATI (Snap On Tools) Nutplate Jig AT518U-1/4 - Sheet Metal Aircraft Tool
ATI Nutplate Jig- Nice condition- Model: AT518U-1/4- ATI is a Snap On company- American made* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1466dff4750-0x116-
|
|
|
ROCKWELL 90 DEGREE AIR DRILL 6500 RPM AIRCRAFT TOOLING SHEET METAL TOOLS 1/4-28
90 degree 6500 rpm Rockwell air drill in decent working condition. Drill operates fine for me but it has some blow by near the air fitting and some head wobble. Still plenty of life left for the cost.
|
|
|
ATI (Snap On Tools) 3/8" Rivet Set American Made Aircraft Sheet Metal Tool
ATI Rivet Set- 401 Shank- AN470- For 3/8 rivets- 3.5" overall length- May have light surface oxidation/ discoloration from long term bulk storage. Will be in good useable condition- 3.8 oz* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
ATI (Snap On Tools) Short 3/16 Rivet Set Aircraft Sheet Metal Tool
ATI Rivet Set- 401 Shank- AN470- For 3/16 rivets- 2.5" overall length- Model: AT100A-2-3/16- I have many of these. The one you receive will be in good useable condition. Any blemishes are from bulk storage with other rivet sets- American made- ATI is a Snap On company* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
ATI (Snap On Tools) 1/8 Rivet Set 2.5" American Made Aircraft Sheet Metal Tool
ATI Rivet Set- 401 Shank- AN470- For 1/8 rivets- 2.5" overall length- Model: AT100A-2-1/8- Good condition- American made- ATI is a Snap On company* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
ATI (Snap-on)Sheet Metal Hole Saw AT474-40-2-13/16",AT474-27-2"Aircraft Tools
Excellent used condition Lot of 2! some rust! thanks for looking please see my other ATI. Tools
|
|
|
ATI (Snap On Tools) Short Flush Rivet Set AT113A-1 Aircraft Sheet Metal Tool
ATI Flush Rivet Set- 401 Shank- Model: AT113A-1- American made- ATI is a Snap On company* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
ATI (Snap On Tools) 5/32 Rivet Set 2.5" Aircraft Sheet Metal Tool
ATI Rivet Set- 401 Shank- AN470- For 5/32 rivets- 2.5" overall length- Model: AT100A-2-5/32- Good condition- American made- ATI is a Snap On company* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Aircraft sheet metal tools cleco clamps
12 cleco clamps for sheet metal working on aircraft
|
|
|
LOT OF 5 Cleco 1/4" air drill 7000 RPM aircraft tools sheet metal!
These are a dresser/ cleco pneumatics air drill surplus from Boeing. The drills are in really good shape and have a great feel in your hand. Has nice smooth trigger control. I have disassembled cleaned and inspected the drill and reassembled with syn grease. 7000 rpm at your finger tips and built in the USA. Any questions please ask. I have other drills available from rpms 150 to 18000 rpm. Rockwell dotco and dresser.
|
|
|
28 Monogram Side Grip Clecos Sheet Metal Edge Clamps Aircraft Tools
Sheet Metal Edge Clamps Made in USA 28pc- 1” Monogram Clamps Clamps have about ¾” grip. Designed for sheet Metal Work but good for many projects. These are our rejects. Some of clamps missing part or have grind mark. Some alignment tabs are missing. All clamps are functioning. Sold as is. No Returns accepted for this item.
|
|