|
5/8" VALENITE VCDD-062-075-0512 INDEXABLE BORING BAR W/ 3/4" SHANK
5/8" VALENITE INDEXABLE BORING BAR PART NO. VCDD-062-075-0512. 5" OVERALL LENGTH. 3/4" DIAMETER SHANK Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $7.50 for USPS Priority Mail shipping with tracking. STOCK NO. BB1317 Thanks for looking!
|
|
|
G&L DAVIS BORING BLOCKS / BLADES VARIOUS SIZES BETWEEN 3" AND 4"
G&L DAVIS BORING BLOCKS/ BLADES VARIOUS SIZES BETWEEN 3" AND 4" G8 STL 3.875 DIA. 311-81038-75 QTY: 1 STYLE: CENTER SCREW G8 NO. 3.730 DIA. STL 374 QTY: 1 STLE: WEDGE LOCK G6 NO. 3.50 DIA. STL 374-01274-00 QTY: 1 STYLE: WEDGE LOCK G8 3.375 TO 3.5 DIA. 374-00376-11 QTY: 1 STYLE: CLAMP G6 NO. 3.70 DIA. STL 374-01274-02 QTY: 4 STYLE: WEDGE LOCK G6 NO. 3.60 DIA. STL 374-01274-01 QTY: 1 STYLE: WEDGE LOCK G6 STL 3.888 DIA. 311-62038-88 QTY: 2 STYLE: CENTER SCREW G8 NO. 3.60 DIA. STL 374-01269-15 QTY: 1 STYLE: WEDGE LOCK G8 NO. 3.850 DIA. STL 374-01666-65 QTY: 1 STYLE: WEDGE LOCK G8 NO. 3.37 DIA. 374-00376-11 QTY: 1 STYLE: CLAMP G8 NO. 3.50 DIA. 374-00376-12 QTY: 1 STYLE: CLAMP G8 NO. 3.00 DIA. 374-00376-08 QTY: 5 STYLE: CLAMP G8 NO. 3.350 DIA. STL 374-01821-87 QTY: 1 STYLE: WEDGE LOCK G8 3.4 DIA. M.1006.5588 311-82034-00 QTY: 1 STYLE: ... moreCENTER SCREW G8 NO. 3.350 STL 374-01821-87 QTY: 1 STYLE: WEDGE LOCK G8 3.2 DIA. M.1006.5582 311-82032-00 QTY: 2 STYLE: CENTER SCREW G8 NO. 3.440 STL 374-01821-82 QTY: 1 STYLE: WEDGE LOCK G8 M.1300.4818 QTY: 3 STYLE: CENTER SCREW G8 3.937 DIA. 311-01039-37 QTY: 1 STYLE: CENTER SCREW G8 STL 3.730 DIA. 311-82037-30 QTY: 1 STYLE: CENTER SCREW G8 NO. 3.875 DIA. STL 374-01 QTY: 1 STYLE: WEDGE LOCK G8 NO. 3.220 DIA. 374-01271-47 QTY: 1 STYLE: WEDGE LOCK G8 NO. 3.70 DIA. STL 374-01269-16 QTY: 4 STYLE: WEDGE LOCK G8 3.800 DIA. M.1006.5603 311-82038-00 QTY: 1 STYLE: CENTER SCREW TO ORDER PLEASE BUY THE QUANTITY YOU ARE INTERESTED IN AND LET US KNOW WHICH OF THE AVAILABLE SIZES YOU WOULD LIKE.
|
|
|
Komet RB UBZ .750-801-F-R 3/4" Boring Bar
Komet RB UBZ.750-801-F-R 3/4" Boring Bar 10.5" OAL Good Condition NU1-D4-R3
|
|
|
Boring type cutting tool holders w/ 3/4" shank
Up for sale are these Boring type cutting tool holders w/ 3/4" shank. Items hold 3/8" and 1/4" cutting tools.
|
|
|
USED CARBOLOY SECO EPB GRAFLEX DUAL INSERT BORING HEAD A710-60 (3.35" to 4.53")
LISTING IS FOR A USED CARBOLOY SECO EPB GRAFLEX DUAL INSERT BORING HEAD w/ INDEPENDENT SETTINGS BRAND- CARBOLOY SECO PART# A710-60 BORING RANGE- 3.35" to 4.53" 85mm to 115mm) SHANK- 1.42" 36.00mm) GRAFLEX SHANK NO. 6 GAGE LENGTH- 4.13" 105.00mm) INSERT HOLDER PART# A713-60& A713-61 BOTH SLIDES ARE MISSING PINS USES INSERTS- CCMT 1204(NOT INCLUDED) CONDITION- GOOD USED LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING ... moreFACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCH
|
|
|
BORING BAR 2 3/8" BY 15 3/4" (H-18)
I ship 6 days a week. I offer money back quarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interersted INTERNATIONAL SHIPPING VARIES Powered by The free listing tool. List your items fast and easy and manage your active items. On Feb-04-13 at 08:32:13 PST. Seller added the following information: IF YOU PURCHASE THREE ITEM AT FULL PRICE I WILL PROVIDE FREE PRIORITY SHIPPING! JUST ASK FOR COMBINE INVOICING.
|
|
|
2 KENNAMETAL HITACHI SEIKI 3/4" ID BORING BAR HOLDERS KV 40 SHANK
2 USED KENNAMETAL ID TOOL HOLDERS HOLD 3/4" DIAMETER TOOLS KV 40 SHANK VERY GOOD CONDITION $9.50 FOR USPS PRIORITY MAIL SHIPPING TO ANYWHERE IN THE USA. EXPEDITED SHIPPING OPTIONS ALSO AVAILABLE. IN MOST CASES ITEMS WILL SHIP THE SAME DAY PAYMENT IS RECEIVED. WE ACCEPT CHECK. MONEY ORDER, VISA/ MASTERCARD, PAYPAL, AND CASH ON PICKUP. FEEL FREE TO CALL US AT 440-343-4419 WITH ANY QUESTIONS. ITEMS ARE SOLD AS-IS. WHERE-IS SO PLEASE ASK QUESTIONS BEFORE BIDDING. THANK YOU FOR VIEWING OUR AUCTIONS!
|
|
|
5/8" (6) 3/4" (1) HSS cutting lathe tool boring bar bit LOT
Assorted Boring bars. 6 total. One 3/4" and Five 5/8" bars cutting lathe tool boring bar bit. Still some use left. Especially if you can grind. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-140a13a6300-0xf4-
|
|
|
Used 30AT FLYNN Boring Head, Holds 3/4" Tools And Has A R8 Shank
Used 30AT FLYNN Boring Head. Holds 3/4" Tools And Has A R8 Shank. The tip of the tool that is mounted in the boring head is damaged You will get The other tools in the pictures and they are marked china You will get the tools you see in the pictures Posted with
|
|
|
MACHINIST TOOL LATHE Carbide Insert Boring Bar 3/4" Shank
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
|
|
|
Boring heads w/ 3/4" and 1/2" shanks 2pcs
Up for sale are these Boring heads w/ 3/4" and 1/2" shanks. Items holds 3/8" and 1/4" cutting tools square type.
|
|
|
3/4" Solid Carbide Shank Boring Bar 10" OAL (my ID-O4)
I combine shipping so shop for more in my Store and save. For my convenience I ship mostly flat rate boxes but if you think you can save by using another option let me know at time of purchase and I will do it as long as its within postal guidelines. If you have purchased and paid for multiple auctions and more shipping was paid for then I need to get your items to you I will issue a refund for any overage. Thanks for looking and Have a good day.
|
|
|
LOT OF TWO SOLID CABIDE BORING BARS 5/8" AND 3/4"
LOT OF TWO USED SOLID CABIDE BORING BARS 5/8" AND 3/4" DIA MFG. UNKNOWN SHIPPING $12.49 ALL 50 STATES INTERNATIONAL SHIPPING BASED ON LOCATION: Canada/Mexico: $40.95 All Others: $59.95 NOTES ABOUT SHIPPING: International Buyers: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Recent increases in USPS Priority Mail International Rates are reflected ... morein our shipping charges. All Buyers: We strive to make shipping affordable and quick. The USPS's Flat Rate Box and Flat Rate Envelope provide quick delivery at a reasonable cost to ship the majority of our items. Our shipping charges are based on the actual shipping costs plus a small handling charge. We believe these rates are very reasonable. Especially since we combine shipping at no additional charge where additional auctions/items will fit in the same flat rate package. If you have questions about our shipping charges or combining shipping, please email us before you bid. LOOK AT MY OTHER AUCTIONS; I WILL COMBINE SHIPPING Payment arrangements must be made within three days of end of auction. Visit my eBay Store: THANK YOU from Firemade_Tools Powered by
|
|
|
KENNAMETAL BORING BAR SOLID CABIDE 3/4" E12 SCLPL3
ONE USED KENNAMETAL BORING BAR SOLID CABIDE 3/4" DIA PART# E12 SCLPL3 SHIPPING $12.49 ALL 50 STATES INTERNATIONAL SHIPPING BASED ON LOCATION: Canada/Mexico: $40.95 All Others: $59.95 NOTES ABOUT SHIPPING: International Buyers: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Recent increases in USPS Priority Mail International Rates are reflected ... morein our shipping charges. All Buyers: We strive to make shipping affordable and quick. The USPS's Flat Rate Box and Flat Rate Envelope provide quick delivery at a reasonable cost to ship the majority of our items. Our shipping charges are based on the actual shipping costs plus a small handling charge. We believe these rates are very reasonable. Especially since we combine shipping at no additional charge where additional auctions/items will fit in the same flat rate package. If you have questions about our shipping charges or combining shipping, please email us before you bid. LOOK AT MY OTHER AUCTIONS; I WILL COMBINE SHIPPING Payment arrangements must be made within three days of end of auction. Visit my eBay Store: THANK YOU from Firemade_Tools Powered by
|
|
|
Pair of small Boring Heads from a Bridgeport Mill, 1/2" & 3/4" Straight Shanks
I have been liquidating the machine shops from a regional trade school. And over the next few weeks the tools and equipment from Machine Shop#3 will be offered for sale. This shop is a little larger than the previous two and there is probably a wider variety of tools. As the pieces are inventoried and released for disposition they will be listed. I will do my best to describe the items accurately but sale is final so please feel free to ask any questions that you might have. Offered here is a pair of Boring Heads which both have straight mounting shanks. One is a Pierce#230(mfg'd. in USA) which has a 1/2" shank and receives a 1/2" tool shank. The other is a Sushok which has a 3/4" straight shank and also accommodates a 1/2" tool shank. Both of the heads look to be in good condition.
|
|
|
4 WOODWORKING 5/8", 3/4", 7/8" & 1" BORING AUGER BITS
aims 4 WOODWORKING 5/8" 3/4" 7/8" 1" BORING AUGER BITS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 4 Woodworking Boring Auger Bits in GREAT condition. For all electric drills& drill presses. Specifications Sizes: 5/8" 3/4" 7/8" 1" Shanks: 3/8" Lengths of Cut: 3-1/4" 3-1/2" 2) 3-3/4" Overall Lengths: 6-1/4" 7-1/4" 7-1/2" 8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 4 WOODWORKING 5/8" 3/4" 7/8" 1" BORING ... moreAUGER BITS 4 WOODWORKING 5/8" 3/4" 7/8" 1" BORING AUGER BITS Reliable Tool Inc. c 2011 | Powered by
|
|
|
1-3/4" x 3/4" x 6" CNC BORING BAR EXTENSION SLEEVE
3/4" BORING BAR EXTENSION SLEEVE 1-3/4" O.D. SHANK 6" OVERALL LENGTH Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, or PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. We gladly combine shipping on multiple items purchased. Thanks for looking! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1413c76432e-0xf7-
|
|
|
Lot 1-3/4" OD boring bar sleeve bushing lathe tool holder reducer 1" 1 1/2" ID
Lot of 4 1-3/4" OD boring bar sleeve bushings 1-3/4" outside dimension 1" 1-1/16" 1-1/4" 1-1/2" Inside Dimension approx 3.198" long as shown hole size.869" please see all photos if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent the same or next business day thank you for viewing
|
|
|
U.S.A!! KENNAMETAL INDEXABLE BORING / GROOVING BAR w/ 1-1/4" SHANK & 3 INSERTS
aims U.S.A! KENNAMETAL INDEXABLE BORING/ GROOVING BAR w/ 1-1/4" SHANK& 3 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A by Kennametal. This is an Indexable Boring/ Grooving Bar& 3 Inserts in good condition. Model# NF8 A20-NSL3 Specifications: Current Bore Diameter: 1-3/8" Shank: 1-1/4" Overall Length: 8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! KENNAMETAL INDEXABLE BORING/ GROOVING BAR w/ 1-1/4" SHANK& 3 INSERTS Reliable Tool Inc. c 2011 | Powered ... moreby
|
|
|
TWIN BORE 1 3/4" x 3 MORSE TAPER SHANK boring bar DAVID BROWN TOOL CO
good used adjustable twin boring tool i can't read the markings but it looks like David Brown 3 MT shank x 1 3/4" dia. i don't know the range will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ENCO 3/4" AUTOMATIC BORING/FACING HEAD R8 SHANK #222-1200 w/Wooden Box + MORE
Here's one of the best items you'll find on eBay today! For Sale: One(1) Used, in original wooden box ENCO 3/4" AUTOMATIC BORING/FACING HEAD(Made in France) 3/4" BORING BAR HOLES; 3/4" CROSS HOLE with R8 SHANK#222-1200 + Lot of Boring Bars This item is from my brother-in-law's machine shop. He retired a few years ago and is living on a fixed income. I'm selling it for him and only know that he was the original owner and generally kept his tools and machinery in good working order. The only problem that I know of is that the head is missing one gib lock screw(Allen setscrew? shown in picture#4. DISCLAIMER: I do not understand all the specific details he wrote about this item and the miscellaneous"bars" included other than to say I tried to write down everything accurately. But make no guarantees that ... morenumbers written out to the"thousandths of an inch" are actually that precise. I just wrote what was scratched on a piece of paper. I will try to get any questions answered, but it may take me a day or two longer to respond. Two bars came with original set. Several are custom made ranging from: 1) 1-9/16" Diameter x 7+ inches long(1/4" bit) 2) 1" Diameter x 7-1/8" long(1/4" bit) 3) 1-11/16" Diameter x 5.950" long(1/4" bit) 4) 1" Diameter x 4-11/16" to 4-3/4" long(5/16" bit) 5) 3/4" Diameter x 5-5/8" long(1/4" bit) 6) 1.915" Diameter x 3-1/8" long(3/8" bit) 7)1-1/4" Diameter x 4-1/4" long(3/8" bit) 8)1-1/4" Diameter x 4-1/4" long(3/8" round bit) from original set 9)1-1/4" Diameter x 1-3/4" long(3/8" round bit) from original set PLUS MISC TOOLING(INCLUDING SEVERAL Misc BORING BAR Pieces) The pictures above are of the actual item(s) you are bidding on. If you have any questions. PLEASE ASK! There isn't much else to say. If this what you have been looking for then you also know you should not wait so why not. DMEvarts.LLC Auctions Bidde
|
|
|
ACME 24010S-075L #1 T-A STD 3/4" SS 915E INDEXABLE SPADE BORING BIT
ACME INDEXABLE SPADE BORING BIT 24010S-075L#1 T-A STD 3/4" SS 915E TOTAL LENGTH 11" CALIFORNIA RESIDENTS PAY SALES TAX NO FREE SHIPPING! BUYER IS TO UNDERSTAND OUR TERMS AND CONDITIONS PRIOR TO PURCHASE
|
|
|
Urma Finishing boring head .0002div #25-72-01/ 3.425 - 4.567in w/3in extension
Urma Versamax adjustable Finishing boring head. 25-72-01 range 3.425in. 4.567in. Depth 5.5in One boring head and 3inch extension used. In great working condition. Also have available the Urma Cat 50 holder. This cutter has been well kept and hardly used. No crashes or dings. Swiss made. Coolant passage thru head to point of insert contact. Versamax is the latest in vibration free finishing bore technology. Urma Command is one of the worlds top choices in finish boring. Bid with confidence. 3inch extension Urma#13 72 01. I also have for 50 dollar if needed the Cat 50 holder. Holder adds 2inches. Urma Command. No retention knob. Retails over $1300 US dollars. Buy it Now! and buy used and save hundreds of dollars. Be smart and save.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1416cfb4b6d-0x107-
|
|
|
Kennametal 3/4" A12NER2 Coolant Grooving / Threading bar INSERT KC850 boring bar
Kennametal 3/4" A12NER2 NI7 5" long Coolant Grooving/ Threading bar comes with INSERT KC850 as shown Free Shipping Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive all items are sent same day if bought and payed for before 12.00 noon if not it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy Thank You For Viewing
|
|
|
3/4" Kennametal Solid Carbide RH Boring Bar Triangle Inserts 10" OAL
Up for sale Kennametal(3/4" Diameter x 10" OAL) Solid Carbide Right Hand for Triangle Inserts In Excellent Used Condition Part# C12STUNR3 Check Out my Other items please. Will Combine Shipping to one flat cost just let me know so im aware if ur not paying right away Any questions feel free to ask thank you happy bidding.
|
|
|
CHANDLER-DUPLEX - PRECISION 1/2" BORING HEAD W/ 3/4" SHANK
aims CHANDLER-DUPLEX- PRECISION 1/2" BORING HEAD W/ 3/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Chandler-Duplex. This is a Boring Head in great condition. Specifications Boring Bar& Tool Hole Diameter: 1/2" Shank: 3/4" Head diameter: 2.103" Overall Length: 7-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CHANDLER-DUPLEX- PRECISION 1/2" BORING HEAD W/ 3/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
USED KENNAMETAL INSERT BORING BAR 3/4" DIAMETER by 5" OAL
YOU ARE BIDDING ON A NICE BORING BAR USED KENNAMETAL, INSERT BORING BAR 3/4" DIAMETER by5" OAL. No 512-STUNR3 SEE PHOTOS TO JUDGE FOR YOURSELF THE CONDITION. USED. NO RESERVE. EMAIL ME IF YOU HAVE QUESTIONS. THANKS FOR LOOKING. I HAVE OTHER ITEMS ON SALE NOW LOOK FOR LOW PRICE Terms and Conditions before bidding Ø We accept PayPal only. Ø Items usually ship the same day or next after payment is received. Ø Reduced shipping available on all multiple purchase orders. Ø PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE Ø We recommend you to sign for a PayPal account before bidding. Ø Payment must be received within 7 days after the auction ends. Otherwise. Non-payment alert will be sent to you and negative feedback will be left. Ø All packages will be shipped via Canada Post Ø No local ... morepickup. Ø Shipping Time: To USA.Canada about 3-15 working days, To Italy.Brazil,UK about 14-22 working days, To France.Germany,Europe,Mexico about 8-20 working days, Please understand that international transit requires more complicated procedures. Such as countries customs, transit stations etc. Any weekends or holidays during the transit. The time will be extended accordingly Shipping cost higher? think that this delivery is more expensive in Canada than other countries Ø Do not bid if you do not agree with the above.
|
|
|
DEVLIEG MICROBORE BORING RING R-302 BORE RANGE: 5-1/2 TO 7-3/4" LOT C5333
LOT C5333 WE ARE OFFERING A DEVLIEG MICROBORE BORING RING R-302 BORING RANGE: 5-1/2 TO 7-3/4" YOU WILL RECEIVE AS SHOWN IN PICTURES CARTRIDGE& TOOL BIT(NOT INCLUDED) ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1419ca2a4e0-0x102-
|
|
|
CNC Tool Holder Bushing Type "J" 3/4" Boring Bar Sleeve 8612J
CNC Lathe Tool Holder Boring Bar Bushing 8612J J Style 3/4"
|
|
|
Kennametal S28-NER3 Top Notch 1-3/4sh Threading Grooving Boring Bar 7-4
Kennametal S28-NER3 Top Notch 1-3/4sh Threading Grooving Boring Bar 7-4 USA made by Kennametal Part No. S28-NER3 Uses 3 size Top Notch Threading and Grooving Carbide Inserts Insert Style: NER-3 threading and grooving Shank: 1-3/4 in Overall Length: 16 in Inv. No. 7-4 Price: $95.00 This is a used boring bar. The components parts are readily available thru MSC Industrial Supply or Kennametal direct throughout the USA. This bar is sold as is. We appreciate your consideration
|
|
|
kennametal 3/4" shank top notch boring bar,with 10 inserts.
4" long.uses# 2 inserts.comes with 10 inserts.will combine shipping.
|
|
|
DEVLIEG MICROBORE BORING RING R-302 BORE RANGE: 5-1/2 TO 7-3/4" LOT C5336
LOT C5336 WE ARE OFFERING A DEVLIEG MICROBORE BORING RING R-302 BORING RANGE: 5-1/2 TO 7-3/4" YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
ALORIS AXA 43 BORING BAR HOLDER DOUBLE BORING BAR 1" & 3/4"
ALORIS AXA 43 BORING BAR HOLDER; HOLDS TWO BORING BARS- 1" AND 3/4" IN VERY GOOD CONDITION
|
|
|
SANDVIK 3/4" INDEXABLE BORING BAR - #RTBAP-10-2
aims SANDVIK 3/4" INDEXABLE BORING BAR- RTBAP-10-2 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Sandvik. This is a used Indexable Boring Bar in good condition. Part# RTBAP-10-2 Specifications: Current Boring Diameter: 3/4" Shank Diameter: 5/8" Overall Length: 5-3/4" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SANDVIK 3/4" INDEXABLE BORING BAR- RTBAP-10-2 Reliable Tool Inc. c 2011 | Powered by
|
|
|
G&L Boring Bar Tool Holder NMTB 60 2-3/4 in. Shank Dia. (Inv.19684)
G&L Boring Bar Tool Holder NMTB 60 Quick change Accepts a 2 3/4 in. tool 9 1/2 in. gage dim. 69 lbs. unboxed(Inv.19684) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: a handling/loading charge of $50; and the actual shipping cost(to be determined based on your location) Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: All ... moreinternational sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-141be514f3b-0x101-
|
|
|
CAT 60 Boring Bar Holder 2 3/4 in. Gage dim. 7 3/4 in. (Inv.19700)
CAT 60 Boring Bar Holder Gage dim. 7 3/4 in. Accepts 2 3/4 in. bar 55 lbs. unboxed(Inv.19700) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: a handling/loading charge of $50; and the actual shipping cost(to be determined based on your location) Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: All international sales are subject ... moreto a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
CRITERION Boring Head DBL-202 3/4" shank 1/2" holes
Very Good Condition
|
|
|
ALORIS AXA 4 PRECISION QUICK CHANGE 3/4" CAPACITY BORING BAR HOLDER
Aloris Precision Tool Post Holder Model AXA 4 3/4" Capacity Boring Bar Holder Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
SECO SECDEX-P S-PTENR 12-3 10" 3/4 DIAMETER CARBIDE INSERT BORING BAR LATHE
DESCRIPTION: USED? BORING BAR. 10" LONG 3/4 DIAMETER. One-Shot Machine Oiler. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER T
|
|
|
NICE PINZBOHR .945" - 1.18" TWIN CUTTER ROUGH BORING HEAD W/ 3/4" BAR
PINZBOHR ROUGH BORING HEAD PART NO. 22 4200 Ø24-30MM(945" 1.18" BORING RANGE. WALTER 3/4" DIA. ADAPTER INCLUDED. 6-1/4" OVERALL LENGTH Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. FREE USPS Priority Mail shipping with tracking. Thanks for looking! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141e139e9c3-0xff-
|
|
|
CRITERION MD - 750 ADJUSTABLE BORING BAR VERSA DEX 3/4" DIA.
ONE USED CRITERION VERSA DEX MODEL MD- 750 ADJUSTABLE BORING BAR 3/4" DIA. SHIPPING $7.49 ALL 50 STATES Canada/Mexico: $19.95 All Others: $23.95 NOTES ABOUT SHIPPING: International Buyers: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Recent increases in USPS Priority Mail International Rates are reflected in our shipping charges. All Buyers: We ... morestrive to make shipping affordable and quick. The USPS's Flat Rate Box and Flat Rate Envelope provide quick delivery at a reasonable cost to ship the majority of our items. Our shipping charges are based on the actual shipping costs plus a small handling charge. We believe these rates are very reasonable. Especially since we combine shipping at no additional charge where additional auctions/items will fit in the same flat rate package. If you have questions about our shipping charges or combining shipping, please email us before you bid. LOOK AT MY OTHER AUCTIONS; I WILL COMBINE SHIPPING Payment arrangements must be made within three days of end of auction. Visit my eBay Store: THANK YOU from Firemade_Tools Powered by
|
|
|
Kennametal S28-NER3 Top Notch Threading Grooving Boring Bar NT-3 NAS-3 7-4
Kennametal S28-NER3 Top Notch Threading Grooving Boring Bar 1-3/4" shank 7-4 USA made by Kennametal Part No. S28-NER3 Uses 3 size Top Notch Threading and Grooving Carbide Inserts Insert Style: NG-3042L grooving Insert style: NT-3 60 deg. V-threads Insert style: NA-3& NAS-3 acme threads Shank: 1-3/4 in diameter Overall Length: 16 in Inv. No. 7-4 Price: $95.00 This is a used boring bar. The components parts are readily available thru MSC Industrial Supply or Kennametal direct throughout the USA. This bar is sold as is. We appreciate your consideration
|
|
|
NARDGO BORING BAR BUSHING ADAPTERS 3/4 ID. 1-1/4 OD No BBS-1250
NARDGO BORING BAR BUSHING ADAPTERS 3/4 ID. 1-1/4 OD No BBS-1250 ONE IS NEW AND THE OTHER HAS BEEN CUT TO 4-3/4 OAL
|
|
|
BRIDGEPORT NO. 2 BORING HEAD W/ 3/4" STRAIGHT SHANK + BORING BARS
Bridgeport No. 2 Boring Head w/ 3/4" Straight Shank + Assorted Boring Bars No. 2 Boring Head 5/8" Capacity Approximately 1" On Center Includes Assorted 3/8" 5/8" Boring Bars Includes Steel Case Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
6 CARBIDE TIP FLY CUTTERS 3/4" BORING BARS MILLING LATHE MACHINIST TOOLS L1*5
6 CARBIDE TIP FLY CUTTERS 3/4" BORING BARS MILLING LATHE MACHINIST TOOLS L1*5 Info/Sizes: Enlarge photos to see the condition. I am selling others in different sizes on my other auctions. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. If you are going to bid on other auctions contact me for a payment extension. Foreign buyers are responsible for ... moreall import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
HARDINGE SLIDE TURRET BORING TOOL HOLDER TBA-3/4 3/4" SHANK DV59
HARDINGE TURRET BORING TOOL HOLDER MODEL TBA-3/4 3/4" SHANK 5/8" TOOL BORE EXCELLENT CONDITION $12.50 S&H
|
|
|
DEVLIEG MICROBORE BORING RING R-302 BORE RANGE: 5-1/2 TO 7-3/4" LOT C5339
LOT C5339 WE ARE OFFERING A DEVLIEG MICROBORE BORING RING R-302 BORING RANGE: 5-1/2 TO 7-3/4" YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
3 1/2" Defiance 25A Horizontal Boring Mill, 36" Vert Cross, 1000 RPM, 4-Way Bed
SPECIFICATIONS: Serial Number: 105140. Spindle Diameter: 3 1/2" Vertical Travel: 36" Cross Travel: 60" Horizontal Travel: 46" Spindle Will Travel: 24" Spindle: 6 MT. Table Size: 30" x 60" 4-Way Bed. Spindle Speeds: 20 from 4 to 1000 RPM. 7 1/2 HP 220/440 Volt. 3 PH, 60 CYCLE Starter& Controls. See attached Warranty. Terms, Machine Use and Safety. These specifications are subject to verification upon inspection.
|
|
|
Boring Mill Horizontal 4" Union Model BFT90/3 (1990) www.assetexchangeinc.com
4" Union Model BFT90/3 Table Type Horizontal Boring Mill(1990) Specifications Spindle Diameter: 4" Taper in spindle: 40, Cross Travel(X-Axis) 63" Vertical Travel(Y-Axis) 49" Longitdunal Travel(Z-Axis) 63" Spindle Outfeed Travel(W-Axis) 28" Spindle Speeds: 1600 RPM, Table Size: Rotary: 55" X 49" Equipped With: 55" X 49" Built in Power Rotary Table Facing Head Full Pendant Control Hardened& Ground Ways Stainles Steel Way covers, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
CNC BORING BAR HOLDER/ADAPTER THRU-COLLANT 1-1/4 OD 3/8 ID
CNC BORING BAR HOLDER/ADAPTER THRU-COLLANT 1-1/4 OD 3/8 ID. 4-3/4 OAL.
|
|
|
Doall Boring Head System + Boring Bars 3/4 Shank
Doall Boring Head System + Boring Bars 3/4 Shank. Head is approx. 1 1/2. Comes with some solid carbide boring bars. Largest is 3/8 shank which will fit directly in the head. The smaller boring bars are accommodated with the bushings. Posted with
|
|
|
Boring Turret Lathe Tool Holder 3/4" Shank 1/2" Tool Screw Machine CNC Lathe
This listing is for one Boring Tool Holder with a 3/4" Shank and a 1/2" tool. Needs an adjusting screw. In very good condition.
|
|
|
Universal Eng Ozz Head 95298 Boring Head With 3/4 inch Collet ~ 95325 ~ 551098
Description Universal Eng. Ozz Head 95298 Boring Head 95325 551098 Shank Diameter: 1-1/4 Inch Body Diameter: 4.685 Inch 3/4 Inch Collet Good Condition Shipping-Shipping To USA Only. Not Including Alaska, Hawaii And Us Protectorates. Item Will Be Shipped Same Day Or Next Business Day After Verified Payment-We Ship To Ebay/Paypal Verified Address Only-Please Verify Your Shipping Address Prior To Purchasing-Local Pick Up Is Available Payment& Terms-We Accept Paypal Only-Please Ask Any Questions You May Have Prior To Purchasing-All Sales Are Final. Sold As Is-Returns Are Not Accepted Except If Item Is Not As Described Feedback-We Value And Appreciate Your Positive Feedback-If There Are Any Problems Please Contact Us Before Leaving Neutral/Negative Feedback
|
|
|
1.4 Dia x 12" Long Boring Bar - Accepts 3/8" round tool bits 90 & 30 Degrees
Used- Very Good Condition- 1.4 Dia x 12" Long Boring Bar- Accepts 3/8" round tool bits 90& 30 Degrees- Has flats on two sides. Can be used with the tool bit at a 30 degree angle or a 90 degree angle. 2852 Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1431f1bb6c3-0x109-
|
|
|
1" dia x 6-3/4" Long Boring Bar - Accepts 3/8" Square Tool Bit
Used- Fair Condition- 1" dia x 6-3/4" Long Boring Bar- Accepts 3/8" Square Tool Bit Has flats on 4 sides. 2854 Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1431f1bb751-0xf0-
|
|
|
USED KENNAMETAL S12-STUNR3 BORING BAR (B1606) 3/4"-Shank (T-321-P insert)
LIS TING IS FOR A USED K ENNAMETAL BORING BAR BRAND- KENNAMETAL PART# B1606 STYLE- S12-STUNR3 SHANK- 750" OAL- 10.00" USES I NSERTS- T-321-P(NOT INCLUDED) CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, ... moreVISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PL
|
|
|
CARBOLOY Boring Bar, 1 1/4" Dia. x 14" Long, # SI-MWLNL-20-3, No Clamp, EC
Carboloy Boring Bar. 1 1/4" x 14" Long. It holds a triangular insert that is slightly curved. The bar has a good carbide seat and seat screw but is missing the clamp. It is marked"SI-MWLNL-20-3 Carboloy" It is solid steel and HEAVY duty. This bar has flats on 4 sides. The insert size measures approx. 1/2" Tri. The head looks excellent and shows very little use. NO evidence of crash. Some light spotting is present. The black finish is very good. We are including the allen wrench for it. The tool is in very good condition except for the missing clamp. Visit our eBay store for more great values. Shipping and handling costs for this listing will be $11.95 within the U.S.A. We will ship internationally if a cost or calculator shows below. Or please inquire for international shipping costs. We will ship promptly and will ... moredo all we can to make sure you are satisfied with your purchase. Sales. And invoices for sales within the state of Michigan will have sales tax added. Thank you! 09130 4 12275) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1431ff85b0d-0xfe-
|
|
|
ENGINE LATHE 3/4" BORING BAR AND TOOL HOLDER metal turning ARMSTRONG USA No. 9
good used boring bar& holder holder- Armstrong USA No. 9 approx 1/2" x 1" x 6" long bar- 3/4" x 5 3/8" long x 1/4" hss bit x 45 degrees will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE CIRCLE MACHINE 3/4" INDEXABLE BORING BAR SSBTW-750-8-3L
3/4" CICRLE MACHINE CO. INDEXABLE THREADING BAR PART NO. SSBTW-750-8-3L. 8" OVERALL LENGTH. Nice used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $7.50 for USPS Priority Mail shipping with tracking. STOCK NO. BB1338 Thanks for looking!
|
|
|
BORING BAR 2 3/8" BY 13 3/4" FOR USE WITH SQUARE BIT 3/4 - 3/4" (LOC913)
517-420-5401 SKU: SMT1437 BORING BAR 2 3/8" BY 13 3/4" FOR USE WITH SQUARE BIT 3/4- 3/4" H-18) Condition: Used I offer money back guarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interested. INTERNATIONAL SHIPPING VARIES. I ship my products out 6 days per week. Priority mail is my preferred method. If you need something second day air. Don't hesitate to call. Please call on international shipping. I strive to make every transaction a pleasant experience. I will refund or replace any item you are not satisfied with.
|
|
|
3/4" Kennametal 6-3/4 OAL GROOVING CUT-OFF Top NOTCH BORING BAR A12-NEL2 B $177
This sale is for ONE NICE PREVIOUSLY OWNED Kennametal made GROOVING& CUT-OFF"V"NOTCH BORING BAR A12NEL2 NA7. This bar has an overall length of 6-3/4" regular size is 10" a diameter of 3/4" and takes N.2R grade inserts. Please note that this bar has minor cosmetic damage and scuffs from use and storage(see photos) Included in this sale is one insert#KC5025. Which is in good shape(see photos) This tool is in excellent working condition. This high quality USA made BORING BAR is being offered at an exceptional price. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision ... morewatchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associ
|
|
|
3 DEWALT & OTHER WOOD WORKING BORING BITS - 1", 1-1/4" & 1-1/2"
aims 3 DEWALT& OTHER WOOD WORKING BORING BITS- 1" 1-1/4" 1-1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a 3 Wood Boring Bits in good condition. For all electric drills& drill presses. Specifications: Bit Sizes: 1" 1-1/4" 1-1/2" Shanks: 1/4" hex. Overall Lengths: 2) 6" 6-1/4" Comes as shown In pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 3 DEWALT& OTHER WOOD WORKING BORING BITS- 1" 1-1/4" 1-1/2" Reliable Tool Inc. c 2011 | Powered by
|
|
|
Moore 3/4" dia Boring Bar Boring Head
Moore 3/4" dia Boring Bar Boring Head Bar Length 3-5/16" Accepts up to 5/32" lathe bit/ tool steel Used but in good condition Used but in excellent condition Pictures are of the actual item
|
|
|
Boring Bar 1 1/2" dia x 5 3/4" OAL x 3" x 1 1/2"
Boring Bar SN:22632150 150 220. 1 1/2" dia x 5 3/4" OAL x 3" x 1 1/2" Inventory Box 48#
|
|
|
Spade Drill Holder Boring Machining Deep Drilling metal Cutting Bar 1-3/4
This is a 1-3/4 Spade Drill holder that is coolant fed and was used for one job only. The insert is 1-3/8 and needs to be sharpened. The condition of the bar is very close to new condition. The pictures tell all. Thank you for looking.
|
|
|
MACHINIST BORING BARS 3/4" 1/2" 3/8" LATHE FITS ATLAS CRAFTS SOUTH BEND LOGAN
Set of THREE Lathe Boring bars. Diam 3/4" bit cap 1/4" Diam 1/2" bit cap 3/16"comes with 5/8"removable bushing) Diam 3/8" bit cap 1/8" Check out my!
|
|
|
Flynn No. #45 Boring Head 4 in. Diam. -- 3" Screw Shank
Flynn No. 45 Boring Head 4 in. Diam. 3" Screw thread Additional sizes shown in photos Good working Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. All items are sent same day if bought and payed for before 12.00 noon Monday- Friday. Before 10Am Sat. If not it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store and Facebook Page for more great items and friendly. Reliable customer service. And Great deals. Thank You For Viewing dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14368c7afc8-0xeb-
|
|
|
HEAVY DUTY UNIVERSAL ENGINEERING BORING HEAD OZZ 1-3/4" STRAIGHT SHANK
Heavy Duty Boring Head Mfg By Universal Engineering Model OZZ 134ST-S Approx 4" Boring Capacity 1" Tool Holding Capacity 1-3/4" Straight Shank. 6" Long Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you ... moremust wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- we will ship. Payment MUST be received within 5 business days of earliest auction end. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. We do not issue partial refunds.
|
|
|
Valenite Offset Boring Head 1-3/4" EBN-2A Vari-Set
Valenite Offset Boring Head 1.75" EBN-2A Vari-Set OAL Dia. 1.73" Made In USA 7T01 Shank Dia. 1.50 Shank L. 3.11 Shank Has Been Cut Down Pictures are of the actual item Used but in good condition
|
|
|
3/4 BORING BAR CARBIDE INSERT S12-STUNR3 KE
3/4 BORING BAR CARBIDE INSERT S12-STUNR3 KE SHANK 3/4. OVERALL LENGTH 29/32. AS SHOWN IN PICTURES PLEASE WAIT FOR YOUR INVOICE TO BE SENT TO YOU BEFORE YOU PAY! Check out my!
|
|
|
3/4" ENCO 1200 H.D + 220-1210 R8 BORING HEAD FITS BRIDGEPORT MILLING MACHINE
3/4" ENCO 1200 H.D + 220-1210 R8 TAPER SHANK FITS BRIDGEPORT MILLING MACHINE Click Images to Enlarge ENCO 1200 H.D + 220-1210 R8 TAPER SHANK FITS BRIDGEPORT MILLING MACHINE 3/4" CAPACITY HEAD DIAMETER: 3-3/4" APPROXIMATE CASE MEASURES: 14" x 6" x 5" WEIGHT: 16 LBS NO PAYPAL FOR WILL CALL ITEMS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 18 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 ... moreHandling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport.
|
|
|
3 NEW MILWAUKEE FLAT BORING SPADE BITS 11/16" to 1-1/4"
aims 3 NEW MILWAUKEE FLAT BORING SPADE BITS 11/16" to 1-1/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a lot of NEW spade boring bits Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 3 NEW MILWAUKEE FLAT BORING SPADE BITS 11/16" to 1-1/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
ALORIS MODEL CA1 QUICK CHANGE TOOL HOLDER W/ INDEXABLE BORING BAR 3/4" X 10"
Aloris Heavy Duty Quick Change Tool Holder w/ Indexable Boring Bar Aloris Model CA1 1-1/8" Capacity Includes Indexable Boring Bar 3/4" Diameter x 10" Length Shank Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping ... morerate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- we will ship. Payment MUST be received within 5 business days of earliest auction end. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. We do not issue partial refunds.
|
|
|
Kennametal 3/4 Boring Bar CARBIDE INSERT CNC
Kennametal 3/4 Boring Bar CARBIDE INSERT CNC A12-SCLCR3 NI4. SHANK 3/4. OVERALL LENGTH 8-3/4. AS SHOWN IN PICTURES PLEASE WAIT FOR YOUR INVOICE TO BE SENT TO YOU BEFORE YOU PAY! Check out my!
|
|
|
1-1/4" CARBOLOY VNMG INSERT INDEXABLE BORING BAR SI-MVTNL 20-3
1-1/4" CARBOLOY INDEXABLE BORING BAR PART NO. S1-MVTNL 20-3. USES VNMG INSERT. 10-1/2" OVERALL LENGTH. Used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. BB1419 Thanks for looking!
|
|
|
Large Angle Sine Plate 17"x 25"x 5-3/4" Cnc Milling Grinding Boring Fixturing
This sale is for a high quality cast iron 17" x 25" T- slotted sine plate. Closed Height is 5-3/4" With a pivot to center dimension of 20" Because of the weight this item it will need to ship out on a pallet via freight carrier. We would be happy to palletize and load free of charge. I would estimate shipping to be between $150 and $200 depending on your location. If you'd like an exact quote or to make an offer please call or text me at 573-578-9890 shipping dimensions: 48" x 48" x 48" approx 500 lbs
|
|
|
BORING HEAD 3/4 SHANK WITH 3/4 INSERTABLE BORING BAR
BORING HEAD 3/4 SHANK WITH 3/4 INSERTABLE BORING BAR SEE PHOTOS FOR DETAILS. GOOD CONDITION. MESSAGE ME IF YOU HAVE ANY QUESTIONS OR CONERNS.
|
|
|
Devlieg Microbore NMTB 50 Boring Bar #50M-702T 3-1/4" Body Dia. x 4-3/4 DOC
Used- Good Conditon- Devlieg Microbore NMTB 50 Boring Bar#50M-702T 3-1/4" Body Dia. x 4-3/4 Depth of Cut. Uses triangular. Carbide, inserts. Can have a cartridge installed of the 90 degree position. 2910 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DeVlieg MICROBORE Carbide Insert Boring Cartridge 3/4" Insert 7AC2X-TX-41
DeVlieg MICROBORE Carbide Insert Boring Cartridge 3/4" Insert 7AC2X-TX-41 Very Good Condition RLS1-D1-R8 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback
|
|
|
VALENITE HEAVY DUTY 1-3/4" DIAMETER INDEXABLE BORING BAR MODEL GTB-237 C
Valenite Heavy Duty Indexable Boring Bar Model GTB-237 C 1-3/4" Diameter x 12-3/4" Length Accepts Triangular Inserts Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay ... moreeBay auction end notice. I f you pay immediately following auction end- we will ship. Payment MUST be received within 5 business days of earliest auction end. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. We do not issue partial refunds.
|
|
|
kennametal boring bar b1108 15/16" x 7 3\4" indexable
This is a Kennametal b1108 boring bar with one insert. It has minor clearanceing done. It is 7 3/4" long with 15/16" diameter. the insert is servicable and it takes tp32 inserts. It came from a working machine shop and was in use when purchased as part of a lot. Shipping is USPS flat rate medium.
|
|
|
Devlieg Microbore Boring Head #5MT, 2-3/4" Body Dia., Dual Cartridges
Used- Good Condition- Devlieg Microbore Boring Head MB-5471- 5Morse Taper. 2-3/4" Body Dia. x 3-3/4" Long, Dual Cartridges(90 degree one chipped) 2922 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Devlieg Flash Change Microbore Boring Bar 30FC-60 Bar Dia. 1.6", 4-3/4" Deep Cut
Used- Good Condition- Devlieg Flash Change Microbore Boring Bar 30FC-60. The Bar Dia. is 1.6" 4-3/4" Deep Cut. Good Carbide. 2880 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1-1/2" Shank Beaver Quick Change Boring Head, 2.93" Dia, Accepts up to 3/4" Tool
Used- Good Condition- 1-1/2" Shank Beaver Quick Change Boring Head. 2.93" Diameter Head x 4" Long. Accepts up to a 3/4" wide tool bit. 2899 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DeVlieg MICROBORE Carbide Tipped Boring Cartridge 3/4" Insert 7B3F
DeVlieg MICROBORE Carbide Tipped Boring Cartridge 3/4" Insert# 7B3F Good Condition RLS1-D1-R7 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback
|
|
|
CNC BORING BAR BUSHING-ADAPTER 3/4 ID. 1-3/4 OD THRU-COOLANT
CNC BORING BAR BUSHING-ADAPTER 3/4 ID. 1-3/4 OD THRU-COOLANT 5" OAL
|
|
|
BRASS HEAD MT-4 indexable 3"+ Boring Mill Lathe Bridgeport CNC Atlas EXCELLENT
SEE ALL 12 PHOTOS Excellent Condition I believe they call this a fly cutter and made of brass so the metal to metal contact will not freeze up bit while boring.Feel free to correct me if I am wrong. If the tape measure in photos is of no help then let me know and I can get exact measurements for you. Please see my other machinist tools from the same estate and all very well taken care of from a master machinist and he only had the best. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-143e18557be-0xf2-
|
|
|
Boring Head 2 in. dia. 3/8 bar #4 morse taper .001 adjustment
Precision Boring Head 2" diameter holds 3/8 bar#4 morse taper Used in good condition. Screw us smooth. 001 adjustment. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-143e1dd896c-0xed-
|
|
|
Valenite BB-3A Vari-Set 2" Boring Bar EBN-3 2-1/4" Body Indexable Carbide Doveta
Up for sale here is a Valenite BB-3A Vari-Set 2" Boring Bar EBN-3 2-1/4" Body Indexable Carbide Dovetail Head. Used in good condition. Feel free to ask any questions. SCT3265.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-143e1dd8994-0xde-
|
|
|
Erickson #37 Tenthset .0001" Boring Head - 3/4" Straight Shank - NICE!
Here is an Erickson Tenthset#37 boring head. Graduated in.0001" increments(on dia. with a vernier scale for finer adjustment. Setting is locked with knurled head screw- no hex wrench needed. Accommodates 3/8" shank tools. Either axially or transverse. Straight shank is 3/4" dia. x 2-1/2" long. Appears to be in very nice shape, knurled adjustment collar turns smoothly, no signs of damage or abuse. Will be well-packed and insured for shipment. Returnable within 14 days for full refund. Less shipping. Ships to continental U.S. only. Indiana residents pay 7% sales tax.
|
|
|
TSD Universal Devlieg Microbore 3/4" x 4-1/2" Boring Bar
TSD DeVlieg 3/4" Microbore Boring Bar Made in USA by Universal Engineering 3/4" dia. x 4-1/2" SS075-55-67 Note:This is used. The carbide may need to be replaced or re-sharpened Please see pictures Used but in good condition
|
|
|
CRITERION DBL-203 3/4 " CAP W/ 3/4" SHANK W/ CARBIDE TIPPED BORING BARS
CRITERION DBL-203 3/4" CAP W/ 3/4" SHANK W/ CARBIDE TIPPED BORING BARS Manufacture: Criterion Shank: 3/4" Capacity: 3/4"
|
|
|
CRITERION DBL-202 1/2" CAP W/ 3/4" SHANK W/ CARBIDE TIPPED BORING BARS
CRITERION DBL-202 1/2" CAP W/ 3/4" SHANK W/ CARBIDE TIPPED BORING BARS Manufacture: Criterion Shank: 3/4" Capacity: 1/2"
|
|
|
MITSUBISHI INDEXABLE BORING BAR 5/8" W/ 3/4" BORING BAR + INSERTS
MITSUBISHI INDEXABLE BORING BAR 5/8" W/ 3/4" BORING BAR Size: 5/8" Shank: 3/4" OAL: 10" Model No. S SCL LCR 123
|
|
|
Mitsubishi 3/4" Solid Carbide Boring Bar Coolant Fed OAL 10" Excellent Condition
You are bidding on a Gently used/Excellent Condition C-SCLCL-123 3/4" CARBIDE SHANK WITH COOLANT THRU OAL 10" Uses CCMT 32.51 INSERTS EMAIL if you have any questions
|
|