|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: China Clamping vise for Wire EDM machines with special threatened stainless steel for high stability and rigidity. Maximum clamping 52mm. Maximum clamping 77mm. ... moreMaterial ：High quality stainless steel. We will reply you within 48 hours.
Buy It Now
Free Shipping Condition: New Location: Cranbury, United States Suitable for removing broken tap size: M2 to M48 (5/64" to 1-57/64"). With a high efficiency in processing, it could remove broken tap, screw and is especially ... moregood at processing mark. Depth setting.
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States Material: SUS420 or SUS440 (Stainless Steel). Precision manual wire cutting is used with wire cutting machines, which is more precise to parts processing. ... moreIt is suitable for small workpieces. Polished Edges: It is safer for your hands when you hold it because of the smooth polished edges of the high precision vise.
Buy It Now
$59.99 Shipping Condition: New Location: China Model ：EROWA 90 90 Positioning Pieces. Accuracy range: static repeat positioning accuracy ±0.002mm.
Buy It Now
$27.99 Shipping Condition: Used Location: Aurora, United States This is an Authentic System 3R-602.20. It is a manually operated screw type chuck to be mounted on a wire EDM machine table to hold Macro leveling heads. ... moreIt is stainless in construction. Still has a long life of use ahead.
Buy It Now
Free Shipping Condition: New Location: China Material: Alloy And Ruby. We will reply you within 48 hours.
Buy It Now
$800.00 Shipping Condition: New Location: China 0.012"~0.118" small hole drilling with depth setting function. One-key operation. Product Character. Z-axis Hybrid stepping motor,electric lifting. lt ... moreis suitable for processing micro hole above ф0.3mm and the ultra-thick work pieces with athickness of 300mm or less.
Buy It Now
Free Shipping Condition: New Location: Waterloo, United States New, 6kg spool, P-5 spool size.
$59.99 Shipping Condition: New Location: China
Buy It Now
$18.40 Shipping Condition: Used Location: Park Ridge, United States Used 6" 152mm) Erowa EDM Machine Power Chuck W/ Steel Pallet/Holder 148 x 40 mm Chuck Brand: Erowa Approx Chuck Dimensions: 152 mm x 104 mm Application: ... moreTo Clamp EROWA Electrode Holders& Pallets. Pallet Brand: Erowa Model: Don't Know The Model But Is Very Close to Model# ER-041912 Approx Pallet/Holder Dimensions: 148 x 40 mm Approx Distance Between 2 Outer Holes: 120 mm Approx Distance Between 4 Outer Holes 111 mm& 66 mm Approx Distance Between 4 Inner Holes: 28 mm Version: Steel. Corrosion-Resistant. Application: For Use On All Erowa Chucks Power Chucks& To Accommodate Workpieces& Fixtures In Chip-Cutting Machining Processes. Sold As Is Where Is. With no implied warranty or guarantee. Our Inventory# 9586 Information is Preliminary. Subject to Buyer Verification. If you would like to inspect this item please contact us to make arrangements. We are a member of the MDNA(Machinery Dealers National Association) Orca Machine Tools. Inc. is a stocking used machine tools dealer in Albertville, MN. Please contact us with any questions you may have. There is a $20 loading charge on freight shipments. Buyer is responsible for all shipping costs. US Buyers: Insurance is provided at the buyers request and at the buyers cost. International Buyers are required to pay for Insurance. Please contact us for a shipping quote. Also please wait for an Invoice from us prior to sending payment. If you wish to purchase multiple items. We combine items for shipping and send you an invoice for all items with the combined shipping price. Minnesota buyers will be charged sales tax. Payment in full must be made within 2 days of bid closing. We accept PayPal. Funds must clear prior to item shipment. Visit our eBay Store! Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$16.00 Shipping Condition: Used Location: Unionville, United States
Buy It Now
$26.00 Shipping Condition: Used Location: Oxford, United States Here is a servo motor from a Charmilles 300/310 wire edm.
Buy It Now
$67.73 Shipping Condition: Used Location: Aurora, United States Still has a long life of use ahead. YOU CHOOSE ONE VICE!
Buy It Now
Free Shipping Condition: New Location: China Clamping vise for Wire EDM machines with special threatened stainless steel for high stability and rigidity. Maximum clamping 52mm. Maximum clamping 77mm. ... moreMaterial ：High quality stainless steel. Color ：Silver.
Buy It Now
Free Shipping Condition: New Location: United States In 2012, SFX researched and developed the portable EDM broken tap remover independently, aiming. vibrate when processing. Unique Characteristics for SFX-4000B ... moreTap Remover. 3000w Tap Disintegrator Tap Burner.
Buy It Now
Free Shipping Condition: New Location: China Clamping vise for Wire EDM machines with special threatened stainless steel for high stability and rigidity. Clamping range: 0-100mm. Material: SUS440 ... moreStainless Steel.
Buy It Now
$28.00 Shipping Condition: Used Location: Fairfield, United States Tested, working unit.
Buy It Now
$37.70 Shipping Condition: Used Location: Aurora, United States This is an Authentic Agie PC Board 6203319. This was reported to be in good condition by GFMS. It has not been recently tested, but is wrapped in an anti-static ... morebag. It was unwrapped to photograph.
Buy It Now
$6.05 Shipping Condition: New Location: Hudson, United States DRAWN BRASS TUBE. 7/16" (.4410") OD X. 315 ID X 3 LONG. BRASS ALLOY 260. As your partner it is essential that we provide you with quality parts and impeccable ... moreservice. We also carry the following SILVER TUNGSTEN.
Buy It Now
$16.00 Shipping Condition: Used Location: Bedford, United States PHASE III EDM ANGLE BLOCKS staining on blocks(B86-1)
Buy It Now
$37.70 Shipping Condition: Used Location: Aurora, United States This is an Authentic System 3R-239.345 Ruler. This Ruler should fit many wire EDM machines in the X-axis, but even more in the Y-Axis! You can also cut ... moreit for your specific application. Still has a long life of use ahead.
Buy It Now
$8.50 Shipping Condition: New Location: China Tube type: Single hole. Material: Brass. and blind holes in the electrode spark machine. For processing all kinds of small holes, deep holes.
Buy It Now
$107.47 Shipping Condition: Used Location: Bayonne, United States EDM Tooling System 3R - Starter Kit Model 3R-31.3. This Starter Kit includes everything shown in photos.
Buy It Now
$27.99 Shipping Condition: Used Location: Aurora, United States This is an Authentic EROWA Vice pallet set. Still has a long life of use ahead.
Buy It Now
$8.85 Shipping Condition: New Location: Hudson, United States EDM-3 GROUND BLANK.2500 X.5000 X 1-1/2 Sold as a lot of 5 pcs
Buy It Now
$99.99 Shipping Condition: Used Location: Lombard, United States System 3R - Model 3R- 31.3 Starter Kit EDM Tooling. Set is used with nicks and scratches. Looks like it is not complete. Please review pictures to see ... morewhat is included.
Buy It Now
$27.99 Shipping Condition: Used Location: Aurora, United States Still has a long life of use ahead.
$47.23 Shipping Condition: Used Location: Aurora, United States This is a new 13.2# spool of Hitachi Non-Parrafin brass wire that is. 008".
Buy It Now
Free Shipping Condition: New Location: Walnut, United States Small size and light weight, and shows its special superiority for large work pieces.
Buy It Now
$32.35 Shipping Condition: Used Location: Wheeling, United States WORKING ITEM, REMOVED FROM FI-4020SI EDM.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Wire EDM Precision Manual Vise Slow-moving Wire Vise CNC 4in Jaw Opening 3Kg 1x. Precision Manual Wire Cutting Is Used with Wire Cutting Machines, Which ... moreIs More Precise to Parts Processing. It Is Suitable for Small Workpieces.
Buy It Now
Free Shipping Condition: New Location: China (5) Maximum load capacity: 3 kg. 3) Material: SUS440 Stainless Steel. 6) Max Opening ：75mm.
Buy It Now
Condition: Used Location: United States Z-AXIS: 9.88". EQUIPPED WITH MACHINE WEIGHT: 5,952 LBS. TRAVELS: X-AXIS: 15.74".
Buy It Now
$52.62 Shipping Condition: Used Location: Bensenville, United States
Buy It Now
Free Shipping Condition: New Location: China System 3R Compatible 3R-601.7E-P Pallet 70mm Macro Plating surface Fixture. 100% compatible withSystem 3R. Size:70 70mm.
Buy It Now
$10.51 Shipping Condition: New – Open box Location: Greensburg, United States OKI (EDM) Wire. Fracture load.
Buy It Now
$8.74 Shipping Condition: New – Open box Location: Gainesville, United States System 3R 135.019.821 Clamp Kit Type A for Agie Charmilles EDM. Incomplete, only the 2 clamps and case shown in photos are included. Clamps show no signs ... moreof use. Not sure what else was included in the set. Measurements shown in photos. Please review all photos to determine condition and identification. Item is sold as is with No Returns. Will be shipped via USPS Priority.
Buy It Now
$68.27 Shipping Condition: Used Location: New Ulm, United States KSB MULTI 1800 1D S 501 Pump. Charmilles Robo Form EDM dielectric fluid Fill Pump.
Buy It Now
Free Shipping Condition: New Location: China Maximum tightening: 95mm. Material: Carbon tool steel.
Buy It Now
Free Shipping Condition: New Location: China (6) Max Opening ：100mm. 3) Material: SUS440 Stainless Steel.
Buy It Now
$20.49 Shipping Condition: Used Location: Aurora, United States Mill it down to suit your needs or use as is! It appears that this electrode has never been used to burn anything. This is graphite electrode material ... morethat is Comparable to Poco 200.
Buy It Now
Free Shipping Condition: Used Location: Goodland, United States Several pieces of what appear to be 3r compatible parts. Don’t know part #’s so if you know what you need then you probably know what you’re looking at.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Material: SUS440 Hardness: HCR 45°-55° Parallelism: 0.003/100 mm Squareness: 0.005/100 mm Clamping range: 0-50mm（2 inch） Features： 1.The ... morematerial is processed by the vacuum head and returned to zero, which is reliable and free from deformation. 2.Sliding fixed design for small workpieces 3.Special structural design with high precision 4.Corrosion resistant, wear resistant Features： 1.The material is processed by the vacuum head and returned to zero, which is reliable and free from deformation. 2.Sliding fixed design for small workpieces 3.Special structural design with high precision 4.Corrosion resistant, wear resistant.
Buy It Now
Free Shipping Condition: For parts or not working Location: Oxford, United States Both of these have a similar defect. It is hard to see in the pictures. The crack isn't quite through the entire thickness everywhere, but when it.
Buy It Now
$30.50 Shipping Condition: New Location: Loma, United States 14 lbs of edm wire
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Material: SUS440 Hardness: HCR 45°-55° Parallelism: 0.003/100 mm Squareness: 0.005/100 mm Clamping range: 0-50mm（2 inch）.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 220x50x15mm EDM Board Jig Holder Clamp Fixture Tool For Clamping & Leveling. 1 Stainless steel fixture tool. Material: Stainless steel. Your satis faction ... moreis our ultimate goal.
Buy It Now
$27.99 Shipping Condition: Used Location: Aurora, United States Still has a long life of use ahead.
Buy It Now
$4.00 Shipping Condition: New Location: China Precision Fixture centering plate 50X50 compatible with EROWA and 3Rsystem for CNC EDM. Application: Small electrode weights. Material: Nippon Stainless ... moreSteel.
Buy It Now
$37.70 Shipping Condition: Used Location: Aurora, United States This is an Authentic Agie PC Board 625241. This was reported to be in good condition by GFMS. It has not been recently tested, but is wrapped in an anti-static ... morebag. It was unwrapped to photograph.
Buy It Now
$7.83 Shipping Condition: Used Location: Loyalhanna, United States Used - Taken from working machine JAPAX CNT2-PKG CIRCUIT BOARD 212-25011-D2.
Buy It Now
$6.99 Shipping Condition: New Location: China
Buy It Now
$27.99 Shipping Condition: Used Location: Aurora, United States Still has a long life of use ahead.
Buy It Now
$8.85 Shipping Condition: New Location: Hudson, United States Ceramic Wire Guide Bushing 3.2 MM*STOCK PHOTO*
Buy It Now
$8.70 Shipping Condition: New – Open box Location: Rock Hill, United States This Globe EDM-07~Meter is the perfect addition to your metalworking equipment. With its manual control and electric power source, it is efficient and ... moreeasy to use for all your wire EDM needs. The Globe brand ensures quality and precision in every use. The model is specifically designed for electrical discharge machines, making it the ideal choice for those in the CNC, metalworking & manufacturing industry.
Buy It Now
Free Shipping Condition: New – Open box Location: Wolcottville, United States This is an older spool of wire, it looks clean and in good condition. Country of Manufacture: United States.
Buy It Now
$13.60 Shipping Condition: New Location: Baldwin, United States This is a new item please see all images for proper compatibility
Buy It Now
$9.05 Shipping Condition: Used Location: Loyalhanna, United States Used - Taken from working machine. JAPAX Circuit Board S-2705C
Buy It Now
Free Shipping Condition: New Location: China Compatibility: EROWA and 3R positioning pieces can be installed directly. Opening distance: 8-55mm or 50-75mm. Claw material: 440C (HRC58°). Screw to ... moremake a large torque: 40Nm.
Buy It Now
Free Shipping Condition: New Location: China Maximum tightening: 95mm. Before you open a case. It would also help you on your decision.
|
|
|
|
3R-610.21 Manual Chuck 3R-Systems EDM
This auction is for 1 used. Gut good condition 3R-Systems manual Chuck Part# 3R-610.21. Three ground faces for vertical or horizontal mounting on the machine table. Fixed index position 4x90 degrees.
|
|
|
Everest EDM Rotobore RBH-1C Rotating Spindle
Description Everest EDM Rotobore RBH-1C Rotating Spindle Comes as shown(no drive unit) Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are ... morecommitted to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|
Sparktech EDM Systems 30 amps
Sparktech EDM Systems st 30 AM in used condition. Local Pick up only and pay cash. Cleveland Ohio for more info please call 216-651-5404 John
|
|
|
3R-658.4E-S 3R Sytem EDM Electrode Holder
This auction is for two used Electrode Holders 3R-658.4E-S. 3R-Systems. Each is mounted to holder 3R-651E-P. Good Shape.
|
|
|
3R Systems 3R-658.2E-2 EDM Electrode Holder
Auction is for two 3R System part# 3R-658E-2. One is mounted to holder 3R-651E-P. The other is unmounted.
|
|
|
Spirent Testcenter EDM-2002B 10/100/1000 Dual Media, 2 port Free Overnight Ship
Spirent Testcenter EDM-2002B 10/100/1000 Dual Media. 2 port Free Overnight Shipping If you have any questions about this equipment please feel free to call me@ 877.650.4041. I am available to answer your questions 8-5 pst Free Mainland US Fed Ex Overnight Shipping if you elect to buy it now! Items ship same day on credit card transactions(contingent upon credit card address) This unit is used in excellent condition and ships to you with a 90 day hardware warranty. You are bidding on the following: 1 x 10/100/1000 Dual Media Module for TestCenter. 2-ports per module. The dual media interface has both copper and fiber interfaces on a single module. 10/100/1000 Mbps and 1Gigabit Ethernet port densities range from 2 ports up to 96 ports in a single chassis. For a link to all our Testcenter Ebay auctions please Series 2000 GigE modules can be ... moreused to measure performance of Layer 4 to 7 devices such as firewalls. Load balancers, IDS/IPS systems, SSL accelerators, web accelerators and SSL and IPSec VPNs. Series 2000 modules can scale up to 32,767 streams per port. When combined with high-scale Spirent TestCenter software components, they offer the complete high performance testing solution. NOTE: NO SOFTWARE OF ANY KIND(EXTERNAL OR INTERNAL) IS PROVIDED WITH THE HARDWARE. PLEASE CONTACT SPIRENT TO OBTAIN SOFTWARE LICENSE RIGHTS AND MAINTENANCE SUPPORT. For more information please FREE SHIPPING! When you use BUY IT NOW! US Only. Buyer pays actual shipping from zip code 97301 if"Buy it Now" is not elected. Payments made with credit or ATM cards must be faxed and authorized by signature. I can only ship to the Billing/Confirmed address in ALL Visa/Paypal transactions. Powered by
|
|
|
Fanuc Wire Edm Guides
8 set of upper and lower guides for fanuc wire edm. Used I think 7 are.25 and 1 is.20 Posted with
|
|
|
Spirent TestCenter EDM-1001A 4 Port 1G Dual Media Ethernet Module
ITEM TITLE 100% Tested-1yr warranty-NBD advanced replacements. Smartech Consulting offers a wide range of IT equipment available to buy. Rent or lease. Please contact us if you have IT equipment for sell or trade-in. Store Categories, Live Chat At Smartech Consulting. Inc. you will find a wide range of Spirent Communications Test and Measurement equipment available to buy, rent or lease. F ind a wide range of Spirent Communications Test and Measurement equipment available to buy. Rent or lease. If you cannot find the Spirent test equipment that you need. Please contact us Smartech Consulting has Consultants available that work with IT departments. Purchasing agents and resellers to source their IT needs. We provide IT Storage solutions. Networking, test and measure equipment. Our mission is to dramatically reduce your acquisition costs and ... moreestablish a global sourcing partner. With Clients and vendors all over the United States and internationally our network of partners allow us to acquire virtually any item our clients need on a Global basis. | Description. Spirent TestCenter EDM-1001A 4 Port 1G Dual Media Ethernet Module for 2000 Series. 10/100/1000 Dual Media. 4 Port, Range: 2 port to 144 ports in a single chassis. 2000 series modules provide higher performance than 1000 series modules, back to top Condition This used item is in excellent working condition. No accessories are included. Warranty 1 year replacement for defective equipments. Full refund if replacement is not available. back to top Shipment. We ship via UPS ground. Next Day and 2nd Day Shipping are available upon request. Please contact us for a shipping upgrade quote. We can also ship on your UPS or FedEx account. Contact us prior to bidding for a shipping quote on all international shipments. back to top Payment. Payments must be received within 5 business days after the close of the auction or auction is considered void and availability of product is not guaranteed. We accept the following forms of payments PayPal Credit Cards We will em
|
|
|
Everest EDM Rotobore RBH-1C Rotating Spindle and Drive Unit
Please read all of my description before you purchase an item. Answers to many of your questions can be found in my description or the F.A.Q section. Payments are required within 4 days of purchasing an item. NO INTERNATIONAL! Y ou are looking at a: Everest EDM Rotobore RBH-1C Rotating Spindle and Drive Unit C ondition: Excellent. Everything works like it should. I ncludes: Everything Pictured Shipping: I generally ship packages on Tuesdays and Fridays. Sometimes they may ship a day sooner or later. If you purchase an item on either of those days. Your item will be sent out on the following shipping date. Returns& Refunds: You will have 14 days to return an item. I will only accept returns if there is a problem with your order. In that case you will receive 100% of your money back plus shipping charges. I will not accept a return for ... morechange of mind or purchasing the wrong item. Tracking: After your purchase you will receive a tracking number which will allow you to figure out exactly where your item is and when it will arrive. You can find your tracking number by looking in your“Purchase History” Underneath your purchased item you will find your tracking number. FAQ’s When will my item be shipped out? I generally ship items Tuesdays and Fridays. But please allow a few days for your item to be shipped. If you purchase an item on either of those days, your item will be shipped out the following shipping date. Do you combine shipping? With certain orders I can combine shipping but please ask before you complete your purchase. Do you offer local pick up? Unfortunately. I do not offer local pick up. Tuesday or Friday is a national holiday. When will you ship my item? If a scheduled shipping date is a national holiday. Your item will be shipped out the next day the post office is open. Can I return this item if I decide I don’t like it? Unfortunately I will not except returns for change of mind. It is your job as a buyer to decide whether you really want the item. Can I return my item if it turns out
|
|
|
Elox 8-62 edm 50 amp, New .0001 digitals, rotary spindle, Zap ram pulser, tap
Elox 8-62 plunge EDM with Astra 50s solid state 50 amp power supply in GREAT condition. All manuals and schematics are available Extremely low hours. This machine was bought new by a mold shop here in town and used for a couple of years before going out of business. A customer of mine acquired it. But never hooked it up. We bought it from them, got it set up, replaced the.0001 digitals, had EDM Zap in to service it, then only used it for a couple of jobs. Bought a wire and couple of cnc mills and it just never got used after that. I have owned this machine for 15 years and it has hardly been used at all in that period of time. If I had the work for it, I would absolutely not hesitate to put it back in the shop and back to work. Includes an EDM Zap ram cycler Has a rotary spindle. This edm can tap with the proper tooling Work plate with flushing ... moreincluded but not pictured. Magnetic chuck is available for additional cost Vacuum flushing also. Depth adjustments have been upgraded to 2" and the magnets replaced with something that actually works The only problem that I know of with this machine is that the 50 amp setting is not working. The technicians at EDM Zap suggested not bothering with it since hardly any one ever burns at that setting anyway. All other settings work just fine. Sadly I have no way to load this. But a reasonably priced rigger is available in the area. No international bidders
|
|
|
TOOLMAKER MADE V- BLOCK GRIND CUBE WITH CLAMP STRAP SETUP FIXTURE MILL GRIND EDM
TOOLMAKER MADE V-BLOCK GRINDING CUBE SETUP FIXTURE MILLing- GRINDing- EDMing used usable EXCELLENT condition! USA For multiple purchases ending within 3 days of each other please hold payment for invoice. To receive combined shipping discount. For auctions ending more than 3 days apart please pay won auctions in full and receive shipping discounts on final sale. There is a small handling fee on all sales, which is included in shipping cost. Multiples to be determined on a case by case basis, upon the number to be packed. I ONLY offer free shipping when listing is marked as such and Best Offers are accepted plus shipping and handling charges, unless otherwise listed. Will send free shipping with best option UPS or USPS. Please take time to view all photos, read all descriptions, and ask questions if necessary before bidding. Thank You for ... moreviewing, bidding and purchasing, GOOD LUCK! Check out my! Be sure to add me to your!
|
|
|
TOOLMAKER MADE BLOCK GRINDING SUPER CUBE SETUP FIXTURE MILL GRIND EDM
TOOLMAKER MADE BLOCK GRINDING SUPER CUBE SETUP FIXTURE MILLing- GRINDing- EDMing NO CLAMP AS IS used usable EXCELLENT condition! USA For multiple purchases ending within 3 days of each other please hold payment for invoice. To receive combined shipping discount. For auctions ending more than 3 days apart please pay won auctions in full and receive shipping discounts on final sale. There is a small handling fee on all sales, which is included in shipping cost. Multiples to be determined on a case by case basis, upon the number to be packed. I ONLY offer free shipping when listing is marked as such and Best Offers are accepted plus shipping and handling charges, unless otherwise listed. Will send free shipping with best option UPS or USPS. Please take time to view all photos, read all descriptions, and ask questions if necessary before bidding. ... moreThank You for viewing, bidding and purchasing, GOOD LUCK! Check out my! Be sure to add me to your! `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13ee9fc837d-0xf0-
|
|
|
system 3R pre setup station wire edm presetting super vise granite
system 3r pre-setup station granite plate with bar granite size is 8 inch long x 6 inch wide x 4 inch thick holding system with supervise and the vise outside measurement is 5 1/2 inch. the second sliding block I do not know what it is called. free shipping lower 48 states
|
|
|
BROCHURES ONLY Easco-Sparcatron EDM Tool Maker 916 AND Power Supplies manual
The fold out item shows and describes the Toolmaker/Partsmaker. Toolmaster, Eascot, etc. lines made when printed. BOL" Series, Control Consoles, Sparcatrons, Hoppers, etc. Dated 1980. The other item describes the Sparcatron Tool Maker 916. Dated 1979. I have similar titles listed separately and will combine shipping. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13ef07f9280-0xff-
|
|
|
"NO WEAR" EDM THEORY & PRACTICE ELECTRODE ORBITING ROTATING Hansvedt book manual
Here are two articles from Hansvedt Engineering Inc. that were in a stack of manuals that I bought at a recent auction. One is titled"No-WEAR" EDM: A BRIEF DISCUSSION OF THEORY AND PRACTICE by Dean A. Pollack and dated 1981. It is 9 pages and all text except for two graphs on the last page. The other article is titled ELECTRODE ORBITING AND ELECTGRODE ROTATING IN THE EDM PROCESS. No author or date mentioned. It is 4 pages and all text. See my other titles. Will combine shipping.
|
|
|
TOPCON GTS-2R 6" SEMI EDM THEODOLITE GEODETIC TOTAL STATION.
TOPCON GTS-2R 6" SEMI EDM THEODOLITE GEODETIC TOTAL STATION. Powers on. Includes everything pictured All items come with a money back satisfaction guarantee and are in excellent condition unless otherwise noted. We combine shipping based on weight. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CHARMILLES EDM Eleroda 110 D10 D20 parts solenoids and cables
CHARMILLES EDM Eleroda 110 D10 D20 parts solenoids and cables
|
|
|
CHARMILLES EDM Eleroda 110 D10 D20 gauges
CHARMILLES EDM Eleroda 110 D10 D20 gauges with the proper OEM fittings
|
|
|
WHEEL DRESSER 4" bc SINE SLIDING DIAMOND TOOLMAKER MACHINIST GRIND INSPECT EDM!!
WHEEL DRESSER. 4" MAYBE 100 MM) SINE SLIDING DIAMOND. SINE BAR PIVOTS ON SIDE OF BASE. ANGLES ARE SET USING GAGE BLOCKS OR SINE SET BLOCKS FOR 4" BETWEEN CENTERS. THIS WHEEL DRESSER IS USED ON SURFACE GRINDER AND TOOL-ROOM GRINDER TO PRECISELY DRESS ANGLES. USA AMERICAN TOOLMAKER MADE AND IN GREAT USED CONDITION AS SHOWN. BASE MEASURES 1.185" WIDE X 2.363" TALL AND IS 2.360" LONG OVERALL. 4" BETWEEN CENTERS AS SHOWN. HARDENED TOOL STEEL. LARGER SINGLE POINT DIAMOND INSTALLED AS SHOWN. ELECTRO-ETCHING ON TOP AS SHOWN. STARRETT WEBBER GAGE BLOCK IS NOT INCLUDED HERE. USED FOR ANGULAR REPRESENTATION ONLY. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES ... moreAND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. CHECK OUR STORE FOR MA
|
|
|
ARD 50 CA EDM (electronic card ) ARD SV01-01
ARD 50 CA EDM CARD SV01-01
|
|
|
Mitsubishi VX-10 Sinker EDM - 1996 - 3R Tooling
Item Information Item Name: Mitsubishi VX-10 Sinker EDM- 1996- 3R Tooling Item# 10370 Price/Each: $54.000.00 Year: 1996 Brand Name: Mitsubishi Model: VX-10 Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description MAKE AN OFFER! SELLER IS WILLING TO ENTERTAIN REASONABLE OFFERS! Mitsubishi VX-10 Sinker EDM New: 1996 Model: VX-10 Specifications: Travels: 9.8" x 13.8" x 13.8" Equipped With: MAKE AN OFFER! SELLER IS WILLING TO ENTERTAIN REASONABLE OFFERS! Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end ... moreof auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to
|
|
|
Mitsubishi FX-10 CNC Wire EDM - 1996 - 5 Axis
Item Information Item Name: Mitsubishi FX-10 CNC Wire EDM- 1996- 5 Axis Item# 10368 Price/Each: $47.000.00 Year: 1996 Brand Name: Mitsubishi Model: FX-10 Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description MAKE AN OFFER! SELLER IS WILLING TO ENTERTAIN REASONABLE OFFERS! Mitsubishi FX-10 5-Axis Wire EDM Year: 1996 Model: FX-10 Specification: X-Axis travel: 13.77" Y-Axis travel: 9.84" Z-Axis travel: 8.66" U-Axis travel: 1.25" V-Axis travel: 1.25" Max. work-piece size: 31.49" X 22.63" X 8.64" Maximum taper angle: 17 Degrees@ 3.93" work height Wire diameter: 0.012" to 0.008" Wire spooling speed: 0 to 9.8 inches per second Equipped With: 105 Gallon dielectric reservoir MAKE AN OFFER! SELLER IS WILLING TO ENTERTAIN REASONABLE ... moreOFFERS! Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But
|
|
|
POCO EDM C-3 COPPER GRAPHITE, ELECTRODE MATERIAL, OVER 3 1/2 LBS.
This is POCO EDM C-3 material- impregnated with copper for better wear resistance.
|
|
|
Mitsubishi EX-8 CNC Sinker EDM - 1998 - 3R Tooling
Item Information Item Name: Mitsubishi EX-8 CNC Sinker EDM- 1998- 3R Tooling Item# 10367 Price/Each: $55.000.00 Year: 1998 Brand Name: Mitsubishi Model: EX-8 Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description MAKE AN OFFER! SELLER IS WILLING TO ENTERTAIN REASONABLE OFFERS! MITSUBISHI EX-8 CNC SINKER EDM MODEL: EX-8 YEAR: 1998 SPECS: EQUIPPED WITH: MAKE AN OFFER! SELLER IS WILLING TO ENTERTAIN REASONABLE OFFERS! Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check ... morewill be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and
|
|
|
EROWA SWISS RAPID ACTION CHUCK ON BLOCK ER-010793 EDM
EXCELENT CHUCK FOR YOU EDM MACHINE SWISS MADE GOOD CONDITION! WELCOME YOUR BEST OFFER!
|
|
|
Edwards EDM-12 Two Stage Rotary Vane Vacuum Pump 220V 1P
Edwards EDM-12 Two Stage Rotary Vane Vacuum Pump 220V 1P. Used unit in good condition. This unit has been tested. Approximate unit dimensions: 22.5" x 8" x 10" Unit weight: 53 lbs. Please contact us regarding international and multi-quantity shipping we are often able to find a better price than the quoted shipping price in the listing For international shipments buyer is responsible for duties and tariffs. Local pickup in San Jose CA. available. Shipping Details: UPS. Requires crating, Shipping weight 63 lbs. Email: For new and used high-tech and industrial automation parts and systems visit us online at. Or. S.
|
|
|
Hansvedt CS-2 Tradesman Ram EDM Electrical Discharge Machine Ram-Type
Frank Bacon Machinery Sales Company. Inc. 4433 East Eight Mile Road· Warren. MI 48090-0886· 586) 756-4280· Fax(586) 756-8009· Toll Free(800) 394-4280 e-mail: sales@frankbacon.com On The Web: www.frankbacon.com Please Call Us With Any Questions Hansvedt Ram-Type EDM Model: CS-2 Tradesman Specifications: DC Ram Travel: 8" DC Ram Capacity(LBS) 75 Ram Platen(WxD) 5.75" x 4" Table Size(WxD) 12" x 20" Table Capacity(LBS) 1800 Tank Size(WxDxH) 35" x 20" x 13" Table Travel(L-R) 13" Table Travel(F-B) 10" Distance Ram Platen to Table(Max/Min) 20"12" Throat Distance: 11" Overall Dimensions(WxDxH) 75" x 51" x 81" Approximate Weight(Lbs) 1900 Electrical Requirements(V.Hz, Ph) 220. 60, 1 EQUIPPED WITH: 3-Axis Acu-Rite Digital Readouts Complete 90 Gal. Dielectric ... moreCoolant and Filtration System DC Servo Ball Screw Drive H-Pulse 201. 20 Amp Solid State Power Supply, S/N AP-18958 SM-155. 20 Amp Solid State Power Booster, S/N A18717 Walker 12" x 6" Magnetic Chuck Work Light Manuals Cleaned. Serviced& Cycled PRICE: FOB Warren. MI 30 DAY SATISFACTION GUARANTEED RETURN PRIVILEGE
|
|
|
Southbend Ingersoll EDM HEAD with High Speed PC servo valve in good condition
SOUTH BEND- INGERSOLL EDM workhead. Originally made by Southbend for Ingersol EDM Corporation, features a six(6) inch high precision Parker hydraulic cylinder, driven by a high speed Pacific Controls Electro-Hydraulic servo valve model# 700. With a 6" X 12" Platen and a dual row of T-slots this head can be an excellent replacement for your worn-out EDM workhead, replaces most existing Ingersol. Excello, Raycon, and Hansvedt bench top machine heads, or can be mounted on a mill base and used as a supplemental EDM machine. Can be operated from most EDM power supplies. Payment Gromax Enterprises Corp. accepts: PayPal. Visa, Master Card, American Express, Money Orders, Cashier Checks, Wire Transfer as payment of goods purchased in our auctions. Please send payment to 17335 Daimler Street. Irvine, CA 92614) All payments must be received ... morewithin 7 business days. Bidders can call 1-949-833-1199 or for further information. All buyers residing in California add 8.00% sales tax. Shipping and Handling Shipping weight: 180 lb. Buyer please e-mail us and provide the ZIP code for a rate quote. Gromax Enterprises Corp. offers a group of quality carriers that can quote you with an estimate of shipping charges for all items. Estimated delivery time is from 6 to 10 business days from the time the order is processed. Buyers are responsible for payment of all Shipping and Handling charges on all items. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with eBay. Thank you for bidding. Gromax Enterprises Corp. appreciates your business very much. Powered by
|
|
|
System 3r mini block edm chuck holder lot tooling package
System 3r mini block edm tooling kit chuck holder model 3r-321.46 70mmx70mm block unit is in very good condition 3r-321.5 chuck and every thing shown in photos. comes as shown free shipping lower 48 states{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13ef95259df-0xfd-
|
|
|
1997! CHARMILLES ROBOFORM-31 CNC SINK EDM
Item Description Specification Description POWER PACK: 64A TABLE SIZE: 19.7" X 15.7" DISTANCE QUILL TO TABLE: 17.7" X-AXIS TRAVEL: 14" Y-AXIS TRAVEL: 10" Z-AXIS TRAVEL: 12" MAX ELECTRODE WEIGHT: 55 LBS MAX WORKPIECE WEIGHT: 1100 LBS TOOL CHANGER: 16 STATION ROTARY ORBITER: STANDARD NC FUNCTION Equipped With: CHARMILLES CONTROL. DROP TANK DESIGN, EROWA ELECTRODE CHANGER, ADAPTIVE CONTROL, GLASS SCALES, POLISHING CIRCUIT Refund Policy We offer a 5 day DOA exchange policy(All shipping/handling cost are the buyer's responsibility) DOA item must be returned for RMA inspection, If exchange is not possible. A refund will be issued less shipping/handling Operating hours Monday-Friday 9:00am- 5:00pm( EST) Eastern Standard Time We can be reached at 905-635-7530 ext.21 or cel# 905-630-5911 Payment Terms International ... morebuyers must pay buy wire transfer. For Canadian& US buyers. We accept Paypal up to $500.00 US Max. Auctions over US$500.00 must pay by wire transfer within 48 business hours from auction close. Payment must be received by our bank within 72 business hours after auction closes. If payment terms are not met. Item will be relisted or offered to the under bidder without further notice. An Unpaid Item Dispute WILL be filed for ALL unpaid items after 7 days as allowed by eBay and are subject to relisting Ontario Residents please add 13%HST. Customs brokerage fees and duty charges may apply. Shipping Info Canadian and US Buyer s to prepay actual shipping costs. Loading. Skidding, Crating or Special Packaging Fee may apply to the item being auctioned if required. Charges will be determined according to the size and sensitivity of the item. Item will be shipped 3-5 business days after payment has been secured. Insurance is offered at an additional cost and must be requested by the buyer in advance to shipping. Paypal payments will be shipped to confirmed addresses ONLY! All winner notifications will be sent to the email address that is registered with EBay. We reserve the right to c
|
|
|
OSBORNE TRANSFORMER 220 3 phase spec 6011B from EDM multi
Osborne Transformer working. Removed from Raycon re-20 EDM machine, 3 phase 220 volt primary. Lists spec number 6011B made in detroit, MI. heavy weighs 50 lbs.
|
|
|
PENTAX PCS-515 TOTAL STATION - SERVICED & 1 YEAR CALIBRATION CERTIFICATE EDM
PENTAX PCS-515 TOTAL STATION- SERVICED& 1 YEAR CALIBRATION CERTIFICATE EDM This listing is for a PENTAX PCS-515 Total Station. Included in the listing is: PENTAX PCS-515 TOTAL STATION instrument Battery charger S pare Pentax MB02 battery(condition unwarranted) Leica type m ini prism with four extension poles Lense sun hood Plumb bob Original Pentax protective case The instrument has been serviced and will be calibrated prior to shipping. The calibration certificate lasting for one year will be included in the package. Although used. The instrument remains in GOOD condition. Here is some further information about this useful instrument: Specifications Magnification: 30X Image: Erect Minimum focusing distance: 1.3m/4.3’ Angle accuracy: 5”1.5 mgon Angle minimum display reading: 5”10” Angle/Dist. units: Switchable between degrees or gon. ... moreMeter or feet, US/ft-International Distance measurement: 1Prism: 6.900’ 3Prism: 9,200’ Distance measurement precision: ±(3mm+3ppm) Distance measuring time: 0.9s+every 0.6s tracking mode Distance measuring time: 1s+every 0.6s coarse mode Distance measuring time: 3s+every 2s fine mode Distance minimum display: 1mm/0.003ft Display: Single Data input/output: RS-232C compatible Compensator: Single axis Compensating range/Accuracy: ±3’0.3” Optical plummet: Erect 3X Weight: 6.2kg. 13.7lbs including tribrach and battery We are happy to ship all around the world. As the costs and delivery speeds vary considerably. Please contact us for a competitive quotation. Please take the time and effort to read our feedback profile. You will see that we supply high quality surveying& safety equipment to a Worldwide customer base. We are proud that you really can buy with complete confidence! If an item you are looking for is not listed here. We can either source it quickly for you or may even already have it sitting in our stocks. You can either contact us through email:smithsurveying@yahoo.co.uk or directly by telephone on 07900 217081 to discuss any specific requirements that you may
|
|
|
System 3R EDM Rotating Spindle with Collets and System 3R Power Supply !!
One System 3R EDM Rotating Spindle Unit in Great Condition 10 collets from 1.0 mm to 10.0mm. 1 Spare belt and one spare brush. Seling spacer. Spring and rubber seals included. Shank size is 20 mm a common size with System 3R Tooling. Power Supply is Dual Voltage 115/230 with switch on back to change voltage. Unit is used does have a couple of minor scratches here and there
|
|
|
WIKA PRESSURE GAUGE 0-4 CHARMILLES MRV-ROBOFIL edm
Check out my! WIKA PRESSURE GAUGE TYPE: 0-4(OUR INVENTORY# 197-J2) THIS IS IN GREAT WORKING CONDITION. ALL ITEMS HAVE BEEN CAREFULLY REMOVED. CHARMILLES MRV-ROBOFIL Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 30 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us ... moreto process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydrau
|
|
|
CHARMILLES MRV-ROBOFIL BATTERY 4150043531 208571820 edm
Check out my! CHARMILLES MRV-ROBOFIL BATTERY TYPE: 4150043531 208571820(OUR INVENTORY# 190-J2) THIS IS IN GREAT WORKING CONDITION. ALL ITEMS HAVE BEEN CAREFULLY REMOVED. CHARMILLES MRV-ROBOFIL Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 30 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business ... moreday in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining
|
|
|
CHARMILLES MRV-ROBOFIL CONTROL BOX CONTROL PANEL HANDLE JOG edm
Check out my! CHARMILLES MRV-ROBOFIL TYPE: CONTROL BOX(OUR INVENTORY# 192-J2) THIS IS IN GREAT WORKING CONDITION. ALL ITEMS HAVE BEEN CAREFULLY REMOVED. CHARMILLES MRV-ROBOFIL Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 30 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order ... morefor us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake pr
|
|
|
REXROTH AIR REGULATOR CHARMILLES MRV-ROBOFIL 0821300300 082 1300300 edm
Check out my! REXROTH AIR REGULATOR TYPE: 0821300300(OUR INVENTORY# 191-J2) THIS IS IN GREAT WORKING CONDITION. ALL ITEMS HAVE BEEN CAREFULLY REMOVED. CHARMILLES MRV-ROBOFIL Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 30 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order ... morefor us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake pres
|
|
|
Eltee 6" x 9" EDM Vacuum Chuck and 9" x 16
EDM Vacuum Chucks You Get"3" Chucks! Eltee 6" x 9" with center inserts 9" x 16" Center hole is 2.5 X 4.5 4" Round Chuck Shipping weight is about 100 LBS Any questions please ask. Thanks For Looking!
|
|
|
Brother HS100 wire edm, submerged, glass scale feedback
Here is a Brother HS100 submerged wire edm. The X and Y travels are 10.2" x 6.3" and the max thickness is 3.9" It has closed loop glass scale feedback for positioning. It is wired 230 volts 3-phase. The dimensions are 34" x 27" x 64" tall. It powers up and the crt comes on. But I can't get it to jog. I also have most of the parts from a couple of other machines in unknown condition that can be purchased separately after the machine sells. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Contact me at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. Sales tax is charged for PA sales unless exempt*
|
|
|
Sodick BF 250 wire edm Parts
For action 2 Yaskawa Servo Packs CPCR-01-SD1A 1 newly rebuilt by NC Servo technology in Westland MI cost was 1500.00 also are all the electrical boards/CPU/ I/O/ mother board/Total of 6 Boards From A Sodick BF 250 that developed a issue with an axis motor and was scraped machine did boot up but gave heat stop alarm Boards should be tested items are AS IS all items are in sealed plastic would like to sell all items as a package DEAL PLEASE!
|
|
|
Hitachi 203Q 4 axis Wire EDM
Hitachi Hcut 203Q 4 axis Wire EDM. Travels 12.59" in X, 9.84" in Y, max height 6.2" the machine is under power and used daily. It had an auto threader but is was removed before I purchased the machine. It is threaded manually. The dirty water pump has been replaced a Dayton pump. The filter is a single Ebbco. The machine is 80" X 73" X 76" and weighs 4,000 lb. I will load the machine.
|
|
|
MITSUBISHI M55K RAM TYPE DIE SINKER EDM
Item Information Item Name: MITSUBISHI M55K RAM TYPE DIE SINKER EDM Item# 10372 Price/Each: $15.000.00 Year: Brand Name: Mitsubishi Model: M55K Serial# Asset Tag: Item Location City: Helena State: Alabama Zip Code: 35080 Country: United States Item Description MITSUBISHI M55K RAM TYPE DIE SINKER EDM MODEL: M55K SPECS: Max workpiece weight.2.200lbs Equipped With: Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be made through PayPal ... moreand will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damages incurred in tr
|
|
|
Sokkia SET 3 100 Total Station For Parts Only - As Is- EDM Questionable
Sokkia SET 3 100 Serial# D20890 Total Station For Parts Only-As Is This unit hasn't been touched in years Its EDM deemed questionable 3/13 bad batteries. No charger What you see is what you get I am selling a few of these for a surveying company that is downsizing and doesnt have the room to store extra units for parts. The EDM on this unit was deemed questionable and therefore this item is as is and being sold in for parts only condition. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13f0a505f4b-0xfb-
|
|
|
Mitsubishi FX30K Wire EDM
1998 Mitsubishi FX30K Wire EDM. Machine was well maintained and is in good running condition. Has Glass Scales. Table Size 51.2 x 31.4 X Axis Travel 29.52 x Y Axis Travel 19.86 x Z Axis Travel 13.78 208 Volt 3 Phase Power. See Youtube link: http:youtu.be/MJM3CZ5z28s Contact Dennis Sharples with any questions#908-752-0042
|
|
|
Dionex Eluent Degas Module Model EDM-2
Dionex Eluent Degas Module Model EDM-2 14 Day Return Policy On This Item(see return policy) You can also see closer views by clicking the photos.The shipping is 16.85 via U.S. Postal Service. Which includes tracking any where to the lower 48 States. Please visit our Ebay Store, we have the coolest items on Ebay, and we will also combine other orders to save you on the shipping. If you need this item shipped to an address other than your Paypal address, please contact me before you purchase, because most orders ship imediately.Thanks for shopping"PARTS AND PICKERS" The Coolest Store in the South. Click below and Check out our Store Our Address is C. Philipp Po Box 7458 Spanish Fort Al. 36577-7458 We accept Credit Cards at 251-490-9892 We Combine Orders to save you on the Shipping Our return policy is as follows. Buyer pays for return ... moreshipping and We will refund the ammount of the auction minus the shipping charge. Returns must be made within 3 days of receipt of merchandise. Phone: 251-490-9892
|
|
|
LOT 29 Magneto Optical Disks 2.6GB EDM-2600B Sony + Others + Juke Box Magazines
Item Description LOT of 29 Magneto Optical Disks 2.6GB Mostly Sony EDM-2600B with a few other Some may have read/ write errors. 2 have labels indicating"bad side" Lot is sold As-Is and I expect a few sides will turn out bad. But I'm confident most will be good. I've used most of these a fair bit and they worked fine. However this was about 5 years ago and since then they have been on the shelf. Always stored in a cool dry and dark environment. They have never been in the sun. Also included is a rare plastic shell magazine case for use in Magneto Optical Jukebox devices. 14 hard shell juke box sleeves. More than half of these should still have incidental data stored on them. Free Standard Shipping. Expedited Upgrade Available Discount when you pick it up in person. King Co. WA. State. Contact me for instructions Contact me ... morefor international shipping ~Thank You for Visiting ~ Customer Service My policy is 100% customer satisfaction with every order. I work hard to provide 5-Star customer service. I want every purchase from me to be a positive experience. We are a Smoke-Free. Pet-Free and Perfume-Free environment. If you prefer the item you purchase to be listed as private in the public feedback record that shows for both the buyer and seller. Contact me before making the purchase and I will designate that setting for the item you request. Note that all medical listings are already set to be private. I make every effort to ensure you know exactly what you are getting and receive exactly what you expect. You are welcome if you have any questions or comments about Anything. If you ever need any help with your order I am happy to be of service. I am always happy to hear from you for any reason. Shipping I personally handle and pack all items to ensure your package will arrive safely and securely. I have 9 years experience packing and shipping internet purchase orders. If there is any damage or problem with your order due to packing. Shipping or handling I take full responsibility. Orders are shipped w
|
|
|
EDM DRILLING MACHINE CNC
1992 Sodick K1CN-3 CNC Small Hole Drilling EDM Work Table Dimensions: 14.960 x 14.960 Inches X Axis Travel 7.87" Y Axis Travel 11.81" Z Axis Travel 11.81" W(Guide) Axis Travel 9.05" Dielectric Tank Capacity: 100 Liters Power Requirement: 3PH 50/60 Hz 200/220 Volt 4kVA Max Machining Current: 30Amps Machine is sold as is with no warranty. Contact: Dennis Sharples/Sharples Machinery Inc. Phone# 908-752-0042
|
|
|
DIONEX -ELUANT DEGAS MODULE - EDM-2 -IN GOOD CONDITION ( ITEM # 481A/19)
DIONEX- ELUANT DEGAS MODULE- EDM-2 IN GOOD COSMETIC CONDITION THIS EQUIPMENT IS OBTAINED FROM A CLEAN WORKING ENVIRONMENT. NO TESTS WERE CONDUCTED YOU CAN SEE THE COSMETIC CONDITION FROM ACTUAL PHOTOGRAPHS. OFFERED FOR SALE ON" AS IS" CONDITION PLEASE CALL US FOR MORE DETAILS TERMS AND CONDITIONS Terms and Conditions Payment To be made NO LATER than 7 days from close of auction to ensure inventory. PAYPAL There is a 07 business days hold for all checks. NO EXCEPTIONS. If payment not received within these terms. We reserve the right to sell and/or post the item again. Contact us if you need more time. For local pick up Cash Only. California residents to pay 9% sales tax. Shipping UPS Ground is normally used. For heavier/oversize packages and International shipping other freight carriers may be used. We do not ship to PO Box. APO ... moreor FPO. No exceptions. Please provide your complete street name. Number and phone number. Shipping cost if given is only for USA(lower 48 States) Ask for a separate quote(city and zip code) for shipping to Puerto Rico. Alaska. And Hawaii and for International Shipping. Buyer is responsible for all duties. Taxes and related tariffs. All orders are shipped to your CONFIRMED PayPal address. Any other option or request is SUBJECT TO 10 WORKING DAY HOLD depending on your history and experience with PayPal. Pick up fee from our warehouse may be up to 50% of the flat rate to ship. Your own shipping arrangements are subject to handling fee. Item will be shipped once payment is received and cleared. Item will ship in the retail box unless specified. Tracking An email to your PayPal address is usually sent with each and every order. Some email filters or spam filters may block this email. Check your settings and spam folder. Your item will normally be shipped within 1– 2 business days after your payment is cleared. Feedback We will leave reciprocal and deserving feedback. Leaving positive feedback validates the stated warranty. We report spoofs. Scams, fake emails, bogus second chance off
|
|
|
Agie Elox Mondo 2 EDM Circuit Board PRD47A 618.531.8 _ 6185318
AgieELOXMONDO2 Our internal inventory number on this product is 17K# AL4-9D Click here To go directly to a Listing of all our auctions AND store items Please Note: This part is from a working machine. Agie Elox Mondo 2, S/N MON 2-020083, B/M#004 with Agie Futura II Control, Model $AgieFuturaII 1PM, S/N AF-1PM-001093. W e have no way of testing it once it was removed. Click here to go directly to a listing of JUST the inventory we have from those machines! Description: You are bidding on a Circuit Board. Model Number: PRD47A 618.531.8 SEE PICS FOR MORE DETAILS! Weight: 1 lbs. Dimensions: 7.25" x.5" x 9.25" Cosmetic Condition Rating: 4-Good Note: This is solely a cosmetic description of the item. This part was pulled from a working machine and is being sold in good working condition unless otherwise stated! 1) Very Poor 2) Poor ... more3) Fair 4) Good 5) Like New Condition*NOTE* Free Shipping& Handling to lower 48 states via our choice of ground carrier. All Expedited Domestic Shipments pay $10.00 Boxing/ Handling/ Processing Plus shipping costs from zip 49534! All International Shipments pay $15.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express International. Only when requested, we ship USPS Priority; this carrier type lacks reliable tracking info. We cannot be held responsible for your shipment once it leaves US land) Please understand if we ship an item on your account. We are una
|
|
|
4 LB. CYLINDER OF GRAPHITE EDM ELECTRODE STOCK
aims 4 LB. CYLINDER OF GRAPHITE EDM ELECTRODE STOCK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a 4 pound Cylinder of Graphite EDM Electrode Stock. Specifications: No. of Pieces: 1. Dimensions: 2-1/4" dia. x 12" long. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 4 LB. CYLINDER OF GRAPHITE EDM ELECTRODE STOCK Reliable Tool Inc. c 2011 | Powered by
|
|
|
28 LBS. OF ASSORTED GRAPHITE EDM ELECTRODE STOCK
aims 28 LBS. OF ASSORTED GRAPHITE EDM ELECTRODE STOCK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is Approimately 28 lbs. of Assorted Graphite EDM Electrode Stock. Specifications: No. of Pieces: 7. Dimensions: 4-3/8" x 4-3/8" x 2-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 28 LBS. OF ASSORTED GRAPHITE EDM ELECTRODE STOCK Reliable Tool Inc. c 2011 | Powered by
|
|
|
SODICK EDM MODEL MARK A7C RAM TYPE DIE SINKER
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! SODICK EDM MODEL MARK A7C RAM TYPE DIE SINKER, Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album SODICK EDM MODEL MARK A7C SN:560036 POWER AC 200/220V 50-60HZ Contact Mark for inspection: 818 429.5114 Items ship upon payment in full. Sales Tax will be collected on all California buyers. Unless otherwise specified by Seller. All Machinery is sold as-is with no warranties expressed or implied by seller. Inspection of the machinery may be arranged with advanced notice. Please feel free to contact me regarding this sale. Thank ... moreyou, Mark Payment, California Sales Tax applies. All items sold as is with no warranties expressed or implied unless otherwise specified. Call Mark at 818.4295114 if you have any questions or special requests. I accept the following forms of payment: PayPal FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
|
|
|
10 degree TOOLMAKER MADE BLOCK GRINDING SUPER SETUP FIXTURE MILL GRIND EDM
10 DEGREE TOOLMAKER MADE BLOCK GRINDING SUPER SETUP FIXTURE block HARDENED AND GROUND TOOL STEEL 4- 5/16" COUNTERBORES FOR SHCS 2 10-32" TAPPED HOLE EITHER END FOR STOPS MILLing- GRINDing- EDMing AS IS used usable EXCELLENT condition! USA For multiple purchases ending within 3 days of each other please hold payment for invoice. To receive combined shipping discount. For auctions ending more than 3 days apart please pay won auctions in full and receive shipping discounts on final sale. There is a small handling fee on all sales, which is included in shipping cost. Multiples to be determined on a case by case basis, upon the number to be packed. I ONLY offer free shipping when listing is marked as such and Best Offers are accepted plus shipping and handling charges, unless otherwise listed. Will send free shipping with best option ... moreUPS or USPS. Please take time to view all photos, read all descriptions, and ask questions if necessary before bidding. Thank You for viewing, bidding and purchasing, GOOD LUCK! Check out my! Be sure to add me to your!
|
|
|
14 CARBON GRAPHITE FIBER EDM EMD ELECTRODE FLAT STOCK MACHINABLE 5"x1/2 MATERIAL
14 CARBON GRAPHITE FIBER EDM EMD ELECTRODE FLAT STOCK MACHINABLE 5"x1/2 MATERIAL CARBON GRAPHITE FLAT STOCK- SLAB 5" x 5" x 1/2" Lot Quantity = 14 used pieces) This listing is for 14 used previously machined slabs of carbon graphite stock with some surface wear such as chipping/ cracks on the edges. Hand etching and some minor oxidation from storage. Some of these are machined on both sides. These sized slabs weigh a total of about 8lbs altogether(shipping weight will be higher when packaged) We also have other listing of some other sized used lots of Carbon Graphite materials from a jewelry manufacturer as well. Don't miss your chance to own these items now! Since carbon graphite is so versatile. It can be used for a variety of applications, including: Machinable- Shaping- Formed Electroplating EDM- Glassblowing Jewelry ... moremaking- Metalworking Pencils- Brake Lining Motor Brushes- Lubricants Make-up Brushes- Nanotube Material According to the USGS. U.S. consumption of natural graphite in 2004-05 averaged 43,800 tonnes in end uses such as refractories, steelmaking, expanded graphite, brake linings, and foundry facings-lubricants. GAN(Graphite Advocate News) import-export statistics for 2006 and 2007 indicate the consumption will continue at that level unless steelmaking carbon raiser takes a drastic drop. Refractories: This end-use begins before 1900 with the graphite crucible used to hold molten metal; this is now a minor part of refractories. In the mid1980s. The carbon-magnesite brick became important, and a bit later the alumina-graphite shape. Currently the order of importance is alumina-graphite shapes, carbon-magnesite brick, monolithics(gunning and ramming mixes) and then crucibles. Crucibles began using very large flake graphite, and carbon-magnesite brick requiring not quite so large flake graphite; for these and others there is now much more flexibility in size of flake required, and amorphous graphite is no longer restricted to low-end refractories. Alumina-graphite shapes are used
|
|
|
Complete Agie Elox Mondo 3 Ram Sinker 50A EDM in GOOD working condition
Agie Elox Mondo 3 Ram Sinker Type Electric Discharge Machine with 50A power generator and oil tank in good working condition. Sold“as is” Payment Gromax Enterprises Corp. accepts: Company Check. Cashier's Check, Money Order or Wire Transfer as payment of goods purchased in our auctions. Please send payment to Gromax Enterprises Corp. at 17335 Daimler Street. Irvine, CA 92614) All payments must be received within 7 business days. Bidders can call 1-949-833-1199 or info@gromax-usa.com for further information. All buyers residing in California add 8.00% sales tax. Shipping and Handling Shipping weight: 2500 lb. Please call Gromax at 800-343-3508 for freight charge quote. Buyer pays the actual shipping charge. Note: Weight restrictions may apply in some cases. Orders under 150 lbs. can be shipped by U.P.S. Freight prepaid or collect. Orders ... moreabove 150 lbs. will be shipped by freight carrier. Gromax Enterprises Corp. offers a group of carriers that can quote you with an estimate of shipping charges for all items. Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed. International buyer pays the actual shipping charge + $10.00 handling fees. International shipments of 150 lbs or more can be made by TNT Solutions. Buyers are responsible for payment of all Shipping and Handling charges on all items. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with eBay. Thank you for bidding. Gromax Enterprises Corp. appreciates your business very much. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
MITSUBISHI DWC90C-1 WIRE EDM
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 05130380003 Manufacturer: MITSUBISHI Description: MITSUBISHI DWC90C-1 WIRE EDM Capacity: Model Number: DWC90C-1 Serial Number: 539D1202 Additional Information: CONTAINS 4 PIECES BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCLU
|
|
|
CARBON GRAPHITE FIBER EDM EMD ELECTRODE FLAT STOCK MACHINABLE 1/4" MATERIAL
CARBON GRAPHITE FIBER EDM EMD ELECTRODE FLAT STOCK MACHINABLE 1/4" MATERIAL CARBON GRAPHITE FLAT STOCK PIECES Various 1/4" thick pieces(Lot Quantity = 1lbs. 15oz) This listing is for a lot of used carbon graphite milled stock remains of broken remains with some chipping on the edges and some minor oxidation from storage. Their is approximately 1 lbs. 15 ozs. all together. We also will be listing some used lots of Carbon Graphite materials from a jewelry manufacturer as well. Don't miss your chance to own these items now! Since carbon graphite is so versatile. It can be used for a variety of applications, including: Machinable- Shaping- Formed Electroplating EDM- Glassblowing Jewelry making- Metalworking Pencils- Brake Lining Motor Brushes- Lubricants Make-up Brushes- Nanotube Material According to the USGS. U.S. consumption ... moreof natural graphite in 2004-05 averaged 43,800 tonnes in end uses such as refractories, steelmaking, expanded graphite, brake linings, and foundry facings-lubricants. GAN(Graphite Advocate News) import-export statistics for 2006 and 2007 indicate the consumption will continue at that level unless steelmaking carbon raiser takes a drastic drop. Refractories: This end-use begins before 1900 with the graphite crucible used to hold molten metal; this is now a minor part of refractories. In the mid1980s. The carbon-magnesite brick became important, and a bit later the alumina-graphite shape. Currently the order of importance is alumina-graphite shapes, carbon-magnesite brick, monolithics(gunning and ramming mixes) and then crucibles. Crucibles began using very large flake graphite, and carbon-magnesite brick requiring not quite so large flake graphite; for these and others there is now much more flexibility in size of flake required, and amorphous graphite is no longer restricted to low-end refractories. Alumina-graphite shapes are used as continuous casting ware, such as nozzles and troughs, to convey the molten steel from ladle to mould, and carbon magnesite bricks line steel conver
|
|
|
BEAUTIFUL RAYCON EDM MACHINE
EXCELLENT CONDITION.WAS USED FOR DEMONSTRATION PURPOSES IN VOCATIONAL SCHOOL. I HAVE USED THESE RAYCONS FOR 35 YEARS. EXCELLENT TOOL ROOM EDM MACHINE.
|
|
|
Hansvedt EDM Brochures - SM-1500E, Tooling, Cintrojet Machines, Elektrojet etc.
Four 1981 fold-out brochures. With price lists, from Hansvedt EDM pertaining to their products. In good clean condition. See my other manuals. Will combine shipping.
|
|
|
Charmilles RoboFil 6000 CNC Wire EDM Machine
FOR MORE INFORMATION. PLEASE CONTACT: KENNY BERGER- HASCO MACHINERY 732-446-9531(best way to reach) Charmilles RoboFil 6000 CNC Wire EDM Machine Specs tank area 49.4"x 28.5" x 17.1" Maxi part sizes 47" x 27.9" Max part weight 1102 lbs Max Height 7.8" strokes x.Y,z 24.8" x 15.7" x 6.3" Tank sizes 45.2" x 35.4" x 89.76" Equipped with Cooling Unit Auto Rethreading double disc Misc Transformer Price $ 9.500.00
|
|
|
EBBCO METALWORKING FILTRATION SYSTEM FOR EDM'S
Item Information Item Name: EBBCO METALWORKING FILTRATION SYSTEM FOR EDM'S Item# 9933 Price/Each: $895.00 Year: Brand Name: Ebbco inc. Model: Serial# Asset Tag: A4670 M-floor Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description EBBCO INC. EDM FILTRATION SYSTEMS 3-UNITS AVAILABLE#WEDM-D-H-DI-01-091 For FANUC Wire EDM's. Can be used with other Brands of EDM's SYSTEM FEATURES: TWO 304 STAINLESS STEEL HURRICANE FILTER VESSELS ONE 304 STAINLESS STEEL D.I. RESIN VESSEL WITH 1 CU FT OF MIXED BED RESIN& PRE-FILTER PROTECTING RESIGN SYSTEM INCLUDES ALL PLUMBING ... moreFOR EASY INSTALLATION SYSTEM BENEFITS: LOWER FILTER COST LESS TIME FOR CHANGE-OUT OF RESIN NO DOWNTIME TO SCRUB CLEAN TANK 3 TO 4 TIMES PER YEAR CAUSING IN EXCESS OF 24 HOURS OF MACHINING TIME LOST. PLUS COST OF EXTRA RESIN TO GET WATER IN CONDITION TO RUN AGAIN HURRICANE II FILTRATION- General Specifications Inlet size.1" NPT. Male Outlet size.2" NPT. Male Maximum flow rate.50 GPM( 187.5 LPM) Max. operating pressure.50 PSI( 3.37 Bar) Filter Cartridge.This unit accepts one cartridge Construction.Low carbon type 304 stainless steel Vent.1/4" NPT. Female Floor space.13" x 13" 330 mm x 330 mm) Service Height clearance.68" 1727 mm) Drain.1" NPT. Male Weight.45 lbs Max. temperature.140degrees F( 60degrees C) PH Range.3 to 11 Micron size-filter.5 Media-filter.Polyester Core.PVC WATER DEIONIZING SYSTEM-General Specifications Inlet/Outlet.3/4"NPT Material.
|
|
|
ACU-RITE DRO SCALE-METRIC .002MM 24" OAL 14"TR-(EDM)
ACU-RITE DRO SCALE-METRIC- 002MM 24" OAL 14" TRAVEL-ROUND 6 PIN PLUG-USED-REMOVED FROM EDM MACHINE. ALSO HAS BACK MOUNTING PLATE. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-13f32654c69-0xee-
|
|
|
NEC FDD FD1139C for PC-9801US and Sodick EDM CNC, Refurbished
This is NEC FDD FD1139C(Ash color) for PC-9801US and Sodick EDM CNC. 3.5 inch Floppy Disk Drive FD1139C(Ash color) It can be used for PC-9801US and Sodick EDM CNC. It is Refurbished and Tested. It is in Very Good work condition. As for details. Please refer to the sample images. Shipping Fee are US $13.75 for Asia. US $ 18.75 for continental USA. Canada& Oceania. US $22.50 for Europe. We will send it out within 3 working days by EMS(Express Mail Service. With Tracking No. and insurance) after clearly payment received. The delivery time by EMS is usually 5-10 business days. It depends on destination and other factors. It may takes up to 23 business days. The Tracking No. will be provided after a shipment and you can track shipping. If you don't receive the item after 14 business days, please contact us, we will investigate and solve ... morethe delivery problem. Before you bid. We want to let you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are striving for 100% customer satisfaction! Positive feedback is very important to us. We request that you contact us immediately before you give us neutral or negative feedback. So that we can satisfactorily address your concer
|
|
|
NEC FDD FD1135D for PC-9801UV2 PC-9801UV21 and Sodick EDM CNC, Refurbished
This is NEC FDD FD1135D for PC-9801UV2. PC-9801UV21 and Sodick EDM CNC 3.5 inch Floppy Disk Drive for NEC PC-9801UV2. PC-9801UV21 and Sodick EDM CNC. It is Refurbished and tested. It is in Very Good work condition. As for details. Please refer to the sample images. Shipping Fee are US $26.25 for Asia. US $ 35.00 for continental USA. Canada& Oceania. US $40.63 for Europe. We will send it out within 3 working days by EMS(Express Mail Service. With Tracking No. and insurance) after clearly payment received. The delivery time by EMS is usually 5-10 business days. It depends on destination and other factors. It may takes up to 23 business days. The Tracking No. will be provided after a shipment and you can track shipping. If you don't receive the item after 14 business days, please contact us, we will investigate and solve the delivery ... moreproblem. Before you bid. We want to let you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are striving for 100% customer satisfaction! Positive feedback is very important to us. We request that you contact us immediately before you give us neutral or negative feedback. So that we can satisfactorily address your concerns. Is there anyth
|
|
|
EPSON FDD SMD-300 for PC-486SE and Sodick EDM CNC, Refurbished
This is EPSON FDD SMD-300 for PC-486SE and Sodick EDM CNC. 3.5 inch Floppy Disk Drive SMD-300 for EPSON PC-486SE. It is Refurbished and tested. It is in Very Good work condition. As for details. Please refer to the sample images. Shipping Fee are US $17.25 for Asia. US $ 23.25 for continental USA. Canada& Oceania. US $27.50 for Europe. We will send it out within 3 working days by EMS(Express Mail Service. With Tracking No. and insurance) after clearly payment received. The delivery time by EMS is usually 5-10 business days. It depends on destination and other factors. It may takes up to 23 business days. The Tracking No. will be provided after a shipment and you can track shipping. If you don't receive the item after 14 business days, please contact us, we will investigate and solve the delivery problem. Before you bid. We want to ... morelet you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are striving for 100% customer satisfaction! Positive feedback is very important to us. We request that you contact us immediately before you give us neutral or negative feedback. So that we can satisfactorily address your concerns. Is there anything you would like us to list a Japa
|
|
|
NEC FDD FD1137D for PC-9801UV11 and Sodick EDM CNC, Refurbished
This is NEC FDD FD1137D for PC-9801UV11 and Sodick EDM CNC 3.5 inch Floppy Disk Drive for NEC PC-9801UV11. It is Refurbished and tested. It is in Very Good work condition. As for details. Please refer to the sample images. Shipping Fee are US $17.25 for Asia. US $ 23.25 for continental USA. Canada& Oceania. US $27.50 for Europe. We will send it out within 3 working days by EMS(Express Mail Service. With Tracking No. and insurance) after clearly payment received. The delivery time by EMS is usually 5-10 business days. It depends on destination and other factors. It may takes up to 23 business days. The Tracking No. will be provided after a shipment and you can track shipping. If you don't receive the item after 14 business days, please contact us, we will investigate and solve the delivery problem. Before you bid. We want to let you ... moreknow that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are striving for 100% customer satisfaction! Positive feedback is very important to us. We request that you contact us immediately before you give us neutral or negative feedback. So that we can satisfactorily address your concerns. Is there anything you would like us to list a Japanese it
|
|
|
NEC personal computer PC-9801UV11 PC9801UV11 for CNC and Sodick EDM, Refurbished
This is NEC PC-9801UV11 for CNC and Sodick EDM It has 3.5inch FDDx2. RAM640kB, Expansion Slot x2 and no options. It is only main part of PC. Monitor, Keyboard, Mouse, HDD and Software are not contained. It is Refurbished. Tested and a Calendar Battery has been exchanged for now one. It is in Very Good work condition. As for details. Please refer to the sample images. Free shipping. But import duties. Taxes, and charges are not included in the item price. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We will send it out within 3 working days by FedEx International Economy after clearly payment received. The delivery time by FedEx International Economy is usually 5-10 working days. It depends on destination and ... moreother factors. It may takes up to 14 days. The Tracking number will be provided after a shipment and you can track shipping. If you don't receive the item after 14 days, please contact us, we will investigate and solve the delivery problem. Before you bid. We want to let you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are striving f
|
|
|
NEC personal computer PC-9801UV21 PC9801UV21 for CNC and Sodick EDM, Refurbished
This is NEC PC-9801UV21 for CNC and Sodick EDM It has 3.5inch FDDx2. RAM640kB, Expansion Slot x2 and no options. It is only main part of PC. Monitor, Keyboard, Mouse, HDD and Software are not contained. It is Refurbished. Tested and a Calendar Battery has been exchanged for now one. It is in Good work condition. As for details. Please refer to the sample images. Free shipping. But import duties. Taxes, and charges are not included in the item price. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We will send it out within 3 working days by FedEx International Economy after clearly payment received. The delivery time by FedEx International Economy is usually 5-10 working days. It depends on destination and other ... morefactors. It may takes up to 14 days. The Tracking number will be provided after a shipment and you can track shipping. If you don't receive the item after 14 days, please contact us, we will investigate and solve the delivery problem. Before you bid. We want to let you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are striving for 10
|
|
|
NEC personal computer PC-9801UV2 PC9801UV2 for CNC and Sodick EDM, Refurbished
This is NEC PC-9801UV2 for CNC and Sodick EDM It has 3.5inch FDDx2. RAM384kB, Expansion Slot x2 and no options. It is only main part of PC. Monitor, Keyboard, Mouse, HDD and Software are not contained. It is Refurbished. Tested and a Calendar Battery has been exchanged for now one. It is in Good work condition. As for details. Please refer to the sample images. Free shipping. But import duties. Taxes, and charges are not included in the item price. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We will send it out within 3 working days by FedEx International Economy after clearly payment received. The delivery time by FedEx International Economy is usually 5-10 working days. It depends on destination and other ... morefactors. It may takes up to 14 days. The Tracking number will be provided after a shipment and you can track shipping. If you don't receive the item after 14 days, please contact us, we will investigate and solve the delivery problem. Before you bid. We want to let you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are striving for 100
|
|
|
EPSON personal computer PC-486SE PC486SE for CNC and Sodick EDM, Refurbished
This is EPSON PC-486SE2 for CNC and Sodick EDM CNC. It has 3.5inch FDDx2. HDD 200MB, RAM1.6MB, Expansion Slot x2 and no options. It is only main part of PC. Monitor, Keyboard, Mouse and Software are not contained. It is Refurbished. Tested and a Calendar Battery has been exchanged for now one. It is in Very Good work condition. As for details. Please refer to the sample images. Free shipping. But import duties. Taxes, and charges are not included in the item price. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We will send it out within 3 working days by FedEx International Economy after clearly payment received. The delivery time by FedEx International Economy is usually 5-10 working days. It depends on destination ... moreand other factors. It may takes up to 14 days. The Tracking number will be provided after a shipment and you can track shipping. If you don't receive the item after 14 days, please contact us, we will investigate and solve the delivery problem. Before you bid. We want to let you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are
|
|
|
NEC personal computer PC-9801UF PC9801UF for CNC and Sodick EDM, Refurbished
This is NEC PC-9801UF for CNC and Sodick EDM It has 3.5inch FDDx2. RAM640kB, Expansion Slot x2 and no options. It is only main part of PC. Monitor, Keyboard, Mouse, HDD and Software are not contained. It is Refurbished. Tested and a Calendar Battery has been exchanged for now one. It is in Good work condition. As for details. Please refer to the sample images. Free shipping. But import duties. Taxes, and charges are not included in the item price. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We will send it out within 3 working days by FedEx International Economy after clearly payment received. The delivery time by FedEx International Economy is usually 5-10 working days. It depends on destination and other ... morefactors. It may takes up to 14 days. The Tracking number will be provided after a shipment and you can track shipping. If you don't receive the item after 14 days, please contact us, we will investigate and solve the delivery problem. Before you bid. We want to let you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are striving for 100%
|
|
|
NEC personal computer PC-9801US PC9801US for CNC and Sodick EDM, Refurbished
This is NEC PC-9801US for CNC and Sodick EDM It has 3.5inch FDDx2. 80MB internal HDD, RAM1.6MB, Expansion Slot x2 and no options. It is only main part of PC. Monitor, Keyboard, Mouse and Software are not contained. It is Refurbished. Tested and a Calendar Battery has been exchanged for now one. It is in Good work condition. As for details. Please refer to the sample images. Free shipping. But import duties. Taxes, and charges are not included in the item price. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We will send it out within 3 working days by FedEx International Economy after clearly payment received. The delivery time by FedEx International Economy is usually 5-10 working days. It depends on destination ... moreand other factors. It may takes up to 14 days. The Tracking number will be provided after a shipment and you can track shipping. If you don't receive the item after 14 days, please contact us, we will investigate and solve the delivery problem. Before you bid. We want to let you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are str
|
|
|
Electro Arc Model 2-DB Metal Disintegrator EDM Tap Remover w/Manual & Primer
Electro Arc Model 2-DB EDM Machine Metal Disintegrator Tap Remover Description. This is a USED Electro Arc Model 2-DB EDM Machine w/Manual. 5 bottles of S.P.C. Water Primer. This is a fully functional complete unit with a 30 day warranty. Payment. We accept Paypal. Visa, Mastercard, Company Checks, Bank Wire Transfers, and Cashiers Checks. Buyers are required to pay for items within 7 days of winning bid. No items will be shipped until payment is made and verified. NOTE: On occasion Paypal may place your payment"under review" This is a security feature to protect the buyer and seller, and may take up to 48 hours to complete. Once payment is verified we will ship your item. Thank you. Shipping. We are always happy to accommodate our customers and fully understand the importance of timely shipping. Please view our shipping policies ... morebelow to better understand how we can help you. All"non-freight" orders placed before 10:00 A.M. EST will be shipped the same day. All orders placed after 10:00 A.M. EST will be shipped on the following day. All smaller items 70 lbs. and under ship USPS Priority Mail. Larger packages up to 150 lbs. will be shipped UPS Ground Service. Next Day Service is available if order is placed by 3:30 P.M. EST. For Emergency Orders call 800-380-4913. Tracking numbers will be posted automatically and emailed to the buyer. If you would like for us to use your UPS. USPS, FEDEX, or DHL account numbers, be sure to post a note on your invoice with the shipping address and your account number. We will insure items at the request of the buyer. All items over $1000 are automatically insured and added to the shipping price unless the buyer requests otherwise. International Shipping is available. We will ship wordwide. Industrial Parts R Us Inc. will not be held responsible for delays due to customs clearance. FREIGHT ORDERS Items requiring Freight Shipping are usually shipped out within 2 days after the order is placed. NOTE: If your item requires a flatbed trailer for shipping. Booking ti
|
|
|
1991 MITSUBISHI #M25J CNC SINKER TYPE EDM MACHINE
MITSUBISHI#M25J CNC SINKER TYPE EDM MACHINE NEW 1991 WORK TANK SIZE- 28" X 18" X 12" WORK TABLE SIZE- 19.25" X 13.5" TRAVEL- X) 10" TRAVEL- Y) 6" TRAVEL- Z) 10" DISTANCE QUILL TO TABLE- MINIMUM) 7.87" DISTANCE QUILL TO TABLE- MAXIMUM) 17.72" MAXIMUM ELECTRODE WEIGHT- 66 LBS. MAXIMUM WORKPIECE WEIGHT- 550 LBS. APPROXIMATE MACHINE WEIGHT- 4.400 LBS APPROXIMATE MACHINE DIMENSIONS- 121"LR) X 53"FB) X 104"H) EQUIPPED WITH- MITSUBISHI JC7G35 CNC CONTROL WITH COLOR MONITOR 35 AMP POWER SUPPLY SYSTEM 3R MACRO HEAD FULL C AXIS( 001 DEGREE) 10" X 15" WALKER FINE LINE MAGNETIC CHUCK WITH VARIABLE CONTROL REMOTE PENDANT CONTROL FLOPPY DISC DRIVE DIALECTRIC SYSTEM WITH FILTERS& COOLER AUTO. FIRE EXTINGUISHER TRANSFORMER. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com ... moreFINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
Charmilles Robofil 290 EDM Machine 1998
I have a Charmilles Robofil 290 for sale. This machine is in excellent working condition and will be in use until it is sold. So this machine will have no down time which is idea for a wire EDM machine. This machine has been very well maintained and runs extremly well.
|
|
|
System 3R EDM CHUCK ADAPTER Macro to 20mm mini shanks
Up for sale is a System 3r Macro to Mini adapter. It is in excellent condition. And includes the 3R key. Please email me any questions. Thanks
|
|
|
Istema Imea 20mm Holder EDM
Used Imea Istema 20mm Holder for your EDM machine. Came with a machine that I have. But I use 3r tooling. My loss is your gain. If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding.
|
|
|
AGIE EDM Wire part 419.054
AGIE Wire EDM machine used. But still working part. Comes with two of these parts. We sold our wire machine and are left with some extra parts. The parts number is 419.054 Please see the other auctions that we have listed that include our other extra parts for the AGIE EDM Wire machine. Thanks for looking. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f3e8256e0-0xff-
|
|
|
EDM Graphite Carbon Blocks Electrode Various Sizes 24 lbs.
EDM graphite carbon blocks electrode material in various grades. The scale is NOT included. But is 8" just for reference. The box weighs 24 lbs. If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f3fbbacea-0x105-
|
|
|
Edwards EDM 12 High Vacuum Pump *Tested Working*
Edwards EDM 12 High Vacuum Pump*Tested Working* Move mouse over images to see larger version Click to view supersized image Welch 1402 DuoSeal Vacuum Pump Item Description: 1 Used Welch 1402 DuoSeal Vacuum Pump. Condition: Pump was pulled from a working environment. This pump was tested and seems to work as designed. Wired for 220 Volts. Details: RPM- 1425/1725 HZ- 60/50 14 Day DOA Warranty. Actual Item Pictured. Location Id: Bryce-Aisle 3 V Bob Payment: Preferred mode of Payment is PayPal. Cashier’s Check and Personal Check are all accepted modes of Payment. Please contact us if these are needed to submit payment. Shipping: Purchases will be shipped via FEDEX or USPS. Please note the EBay Listing shows UPS shipping but FEDEX is our preferred carrier. We guarantee to ship your item within 48 hours(except weekend and public holidays) after ... morepayment has been received Your Tracking number will be sent to you via email once the item has been shipped out. Never accept a damaged package! Instead reject the package and contact us ASAP. International Sales: USPS Express Mail International is our preferred shipping method. All import duties& taxes are responsibility of the buyer. We do offer FedEx Air Freight for items not able to be shipped USPS. International Buyers Interested in Container Quantities- PLEASE contact us through EBay Messaging for more information and pricing. Freight: All Heavy and Bulky items that do not meet the weight and size of regular mail have to be shipped freight. Please contact us for a freight Quote. Shipping Address: Items can only be shipped to the verified shipping address that is submitted with your PayPal payment. If your PayPal address does not match the shipping address. Please modify the address before submitting payment. Please notify us through the EBay Messaging panel. If no notification is received and your item is shipped to the incorrect address you(the buyer) will responsible for any additional charges. Contact: We answer customer emails regularly during our norm
|
|
|
Electro House EDM Tunes 4 DJs JUNE 2013 Traktor Serato MP3 CDJ DJM 2000 1000 900
Electro House& Main Room JUNE 2013 package* The best selection on E b a y 175 tunes[not 100 like other sellers] Biggest selling Dance music tunes for JUNE Full Unmixed tracks. 320 kps, in MP3 format Tracks supplied by direct download link The kind of Djs that would play these tunes are- Swedish House Mafia. Tiesto, David Guetta, Laidback Luke, Armin van Buuren, Nicky Romero, Deadmaus, Avicii, Paul Van Dyk, Afrojack, Steve Aoki, Allesso, Fedde Le Grand, Dada Life, Kaskade, Calvin Harris, Axwell, Steve Angello, Dimitri Vegas, Zedd, Porter Robinson, Martin Solvieg, Bingo Players, Paul Oakenfold, Benny Bennassi, Mat Zo, Dirty South, Bob Sinclair, Chuckie, Tommy Trash. Annie Mac, Knife Party, Hardwell, Arty etc TRACKLIST ON REQUEST JUST MESSAGE ME AND SEND YOUR EMAIL ADDRESS. All Individual full leng th tracks. Seperated for easy selection, ... morerecorded at 320kps Perfect Tunes to impress the coolest of crowds, using your CDJs. Traktor, Serato, virtual DJ etc. Other Collections available* Techno. Minimal, Tech JUNE 2013- £ 8.99* Tech& Jack House JUNE 2013- £8.99*Progressive House June 2013- £8.99*Deep House& NU Disco June 2013- £8.99*Top 100 selling dance charts Dec 2012 to j an 201 3. Pick 3 chart s for £8.99[thats 300 of th e biggest tunes] Just message me your Email address for tracklists! All Tracks Are 320 Kbps High Quality Media perfect for computer for use with DJ software. All Unmixed full leng th DJ Tracks No live Mix s ets. Please note this collection was not purchased from any other seller on ebay and are unique to me. NOTE TO EBAY THESE SONGS DO NOT BREACH COPYRIGHT VIOLATIONS. THESE HAVE BEEN COLLECTED OVER TIME AND THEY ARE IN PUBLIC DOMAIN. MANY OF THESE ARE MY OWN PRODUCTIONS SO THEY ARE FREE FROM COPYRIGHT! P AYMENT IS SOLELY FOR TIME SPENT ORGANISING F ILES. TAGGING AND POSTING!
|
|
|
CHARMILLES ROBOFIL FI2020 EDM
Charmilles Robofil FI2020. 39" x 19.9" x 5.91" work piece dimensions. 12.52" x 8.58" x 4.48" travel. Excellent running wire EDM with automatic wire threader, submerged version. Machine features new stainless steel ruler system for workpiece holding, chiller and transformer. On-site training is available.
|
|
|
EDM AGIE PFI-01
PFI-01 for Agie Futura 2/ Elox Mondo 20. Item is used but works. I also have many other boards/cards for this machine. If you have any questions send me a message. Thank you. Posted with
|
|
|
EDM AGIE EXM-02
EXM-02 for Agie Futura 2/ Elox Mondo 20. Item is used but works. I also have many other boards/cards for this machine. If you have any questions send me a message. Thank you. Posted with
|
|
|
EDM AGIE VGACRD
VGACRD for Agie Futura 2/ Elox Mondo 20. Item is used but works. I also have many other boards/cards for this machine. If you have any questions send me a message. Thank you. Posted with
|
|
|
EDM AGIE PACER
PACER for Agie Futura 2/ Elox Mondo 20. Item is used but works. I also have many other boards/cards for this machine. If you have any questions send me a message. Thank you. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f45d6b48e-0x102-
|
|
|
EDM AGIE MIO 10
MIO 10 for Agie Futura 2/ Elox Mondo 20. Item is used but works. I also have many other boards/cards for this machine. If you have any questions send me a message. Thank you. Posted with
|
|
|
Agie 100/200/300 Series Wire EDM High Pressure Flushing Pump
Agie 100/200/300 Series Wire EDM High Pressure Flushing Pump. Bought at auction. No way to test it. So unsure if it works. Info from the motor: Unitec AG Kloten Switzerland M typ SLf 71 B 2/84 220/380 V 2.37/1.37 A.55 k@ cos.85 50/60 Hz.75 HP 2810/3370 UpM If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding.
|
|
|
Hirschmann System 4000 Wire EDM H4620 "Mighty" Vise
Description Hirschmann System 4000 Wire EDM H4620"Mighty" Vise Excellent Working& Cosmetic Condition Clamping range 0-160 mm(0-6.299" Max. workpiece weight 15 kg(33 lbs) Weight of the vise 2 kg(4.40 lbs) Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools ... moreand metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|
Agie Wire EDM Spare Parts 250/612/315/100/200/300
You are bidding on a lot of used parts that belonged to my Agie 250/612/315/100/200/300. What you see Is what you get. Not pictured is a brand new flushing head for a 100/200/300 part number 24.02/948. We have an upper head. Carbide contact holder, and another piece of the head for the 250/612/315 machines. The O-rings and used carbide contacts are for the 100/200/300 machines. If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f4627815f-0xfc-
|
|
|
Sharp LCD Monitor for nec PC9801 PC9821 FC9801 FC9821 epson PC286/486 Sodick EDM
This is Sharp LCD Monitor LL-T15G4-H for Sodick EDM& NEC PC-9801UV11 PC-9801UV2 PC-9801UV21 PC-9801US PC-9801UF EPSON PC-486SE It is Refurbished and tested. It is in Good working condition. Includes the cable to connect to the NEC& EPSON computer. Accessories: Cables. Operation manual(English, Deutsch, Francais, Italiano, Espanol) Corresponding PC: NEC PC-9801. PC-9821, FC-9801, FC-9821 EPSON PC-286. PC-386, PC-486, PC-586 As for details. Please refer to the sample images. Shipping Fee are US $77.77 for Asia. US $ 106.66 for continental USA. Canada& Oceania. US $122.22 for Europe. We will send it out within 3 working days by EMS(Express Mail Service. With Tracking No. and insurance) after clearly payment received. The delivery time by EMS is usually 5-10 business days. It depends on destination and other factors. It may takes ... moreup to 23 business days. The Tracking No. will be provided after a shipment and you can track shipping. If you don't receive the item after 14 business days, please contact us, we will investigate and solve the delivery problem. Before you bid. We want to let you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have received is defective(excluding items damaged and/or misused by the buyer) You must contact us within 14 days after delivery of the item. No warranty shall apply to any item which is modified or changed in design or function after leaving our shop. We are not responsible for any software problem. And you must return it to us in the original packaging. Please send us an e-mail before sending the item back. We are striving for 100% custome
|
|
|
Trimble S6 High Precision EDM 1 Second Total Station
We are selling the following surveying equipment that was purchased from the manufacturer in March 2008 and used in my business on a dedicated project. This instrumentation was used in the construction of a high level project with specific allowable tolerances and has been calibrated yearly by a Trimble laboratory with an ISO 9000 certification. The instrument has produced repeatable high accuracy results that have been document on a daily basis. The following items are presented for bid; 1 Trimble S6 High Precision EDM 1 second instrument. Serial#92120276 1 Carrying case 1 Geodimeter CU face plate serial#95112237 2 Batteries This instrumentation was used in the construction of a high level project with specific allowable tolerances and has been calibrated yearly by a Trimble laboratory with an ISO 9000 certification. The instrument has produced ... morerepeatable high accuracy results that have been document on a daily basis.
|
|
 |