|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$11.56 Shipping Condition: Used Location: Glenmont, United States Craftsman 101 6" Metal Lathe Headstock Assembly with 1" x 8 TPI with Spindle Headstock Back Gear 4 Step Pulley Atlas 618 101.07301 The headstock ... moreassembly is in good condition with some wear. The spindle shows wear with some set screw wear and some thread wear on the end threads. The gear teeth are in good condition and some of the teeth show some wear but none of them are missing. The pulley bushings show some wear. See pictures. Includes 1" by 8 TPI spindle. Headstock back gear, spindle drive gear, bearing, 4 step pulley, collar, bull gear and 4 bed mounting bolts. It is off a Craftsman Model 101.07301 6" metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $12.00 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. On Jul-22-14 at 08:36:11 PDT. Seller added the following information: `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-148cab837f8-0x10a-
Buy It Now
$6.05 Shipping Condition: New Location: Merrimack, United States The tray sits anywhere along the bed and is able to be slid around depending on where the cutting is happening. Atlas Craftsman Unique Chip Tray. This ... morelittle tray catches that debris and allows for easy empty after regular use.
Buy It Now
Condition: Used Location: Eldred, United States
$15.00 Shipping Condition: Used Location: Pipersville, United States
Buy It Now
Condition: For parts or not working Location: Canoga Park, United States
Buy It Now
$53.51 Shipping Condition: Used Location: Ingleside, United States YOU ARE BIDDING ON A ATLAS/ CRAFTSMAN LATHE TAILSTOCK ATLAS/ CRAFTSMAN 10" LATHE TAILSTOCK ASSEMBLY HANDWHEEL HAS A WOBBLE& IS MISSING THE LOCK ... moreSLEEVE BOLT BUT ALL OF THE OTHER LOCK SLEEVE PARTS ARE THERE CLAMP IS NOT A STOCK PART& HAS BEEN MADE BUT WORKS GOOD INCLUDES DEAD CENTER I WILL COMBINE SHIPPING COST ON ANY AUCTION CHECK MY OTHER LISTINGS FOR MORE LATHE ITEMS Powered by The free listing tool. List your items fast and easy and manage your active items. 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14a28b0a618-0x110-
$15.00 Shipping Condition: Used Location: Pipersville, United States
Buy It Now
$7.15 Shipping Condition: Used Location: Jupiter, United States UP FOR SALE IS THE FORWARD/REVERSE DRUM SWITCH MADE BY FURNAS ELECTRIC. IT IS IN VERY GOOD WORKING CONDITION. IF YOU DO NOT KNOW HOW TO CONNECT IT TO ... moreTHE MOTOR MAKE SHURE YOU FIND AN ELECTRCIAN WHO CAN.
Buy It Now
$7.99 Shipping Condition: New – Open box Location: Piqua, United States Atlas lathe carriage stop indicator holder. Made from 6061 aluminum. Can also be used as a hard stop by mounting a 3/8" rod or bolt instead of an indicator. ... moreMay also fit other lathes with flat bed ways.
$15.00 Shipping Condition: Used Location: Pipersville, United States
Buy It Now
$6.16 Shipping Condition: Used Location: Kenosha, United States Craftsman Atlas 10" 12" Lathe Apron Traverse Gear Case Assembly 3/4 Lead Screw clean gears are all in fine condition
$15.00 Shipping Condition: Used Location: Pipersville, United States ORIGINAL ATLAS CRAFTSMAN 12 INCH LATHE#6821 HEAVY DUTY STEADY REST. GREAT SHAPE Click to Enlarge Click to Enlarge ORIGINAL AND SUPER CLEAN AND SHOWS L ... moreITTLE USE ATLAS CRAFTSMAN 12 IN CH LATHE#6821 HEAVY DUTY STEADY REST ATTACHMENT. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Buy It Now
$10.00 Shipping Condition: New Location: Jamul, United States Heavy card stock 3 mil sealed edge laminated Equivalent chart 12x17 Shop poster Atlas lathe 6 10 12 Machinist chart
Buy It Now
$5.45 Shipping Condition: New Location: Merrimack, United States Atlas Craftsman Carriage Indicator Holder. This does NOT include any indicator, only the magnetic mount is included.
Buy It Now
Free Shipping Condition: New Location: Merrimack, United States Atlas / Craftsman 10" & 12" Spindle Lock Wedge Block. Quality 3D printed Wedge Block used to remove stuck or tight chucks from these old lathes. Note: ... moredoes not include lathe or any other shown parts, and is for one plastic spindle wedge as shown.
Buy It Now
$5.00 Shipping Condition: New Location: Merrimack, United States The part material is strong enough to last for years without any issues, yet will protect more expensive parts of the machine when needed. This is a great ... morepart to always keep a spare at this price!
Buy It Now
$6.16 Shipping Condition: Used Location: Kenosha, United States Very Nice- Original thread indicator dial with bolt and washer for a 10" Atlas or 12" Craftsman lathe. Stamped with part number 9-63. Dial indicator ... moreis legible. Gear is in fine order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$15.00 Shipping Condition: Used Location: Houston, United States Atlas Craftsman. Steady Rest.
Buy It Now
$6.16 Shipping Condition: Used Location: Kenosha, United States Up for sale is a nice condition Atlas Craftsman 10" or 12" Lathe spindle thread protector with a 1 1/2"-8 hole. Will work on many lathes.
Buy It Now
Free Shipping Condition: Used Location: San Ramon, United States This Atlas Craftsman lathe 12" Steady Rest L3-326 is in nice shape as shown. Missing bolt and nut but has the bottom mount. Free shipping to all 50 States!!! ... moreThanks, Steve
Buy It Now
$18.80 Shipping Condition: Used Location: Youngstown, United States
Buy It Now
$5.75 Shipping Condition: New Location: Eagle, United States The Pro Lathe Gage by Edge Technology is used to set lathe tools on the spindle axis for optimum cutting conditions. Poorly set cutting tools will leave ... morea "NUB" at the center of the workpiece after performing a facing cut.
Buy It Now
$5.45 Shipping Condition: Used Location: Cape Neddick, United States ORIGINAL ATLAS CRAFTSMAN 10" 12" METAL LATHE TAILSTOCK OIL DROPPER DAUBER. Great condition. I prefer to ship out by U S post office, you need ... moreto pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days, I will combine orders to save on shipping cost. If you need more pictures or have any questions send me a E-mail or call 954-554-3144. Thank you! CHECK OUT MY OTHER LISTINGS*
Buy It Now
$6.16 Shipping Condition: Used Location: Kenosha, United States Up for sale are (17) 3/8"n H.S.S. tool bits ground to do internal boring and grooving.
Condition: Used Location: Lebanon, United States COLLECTOR GRADE. This lathe is in good used condition. You will find normal wear and use marks that is consistent with age. Free Pickup at my Warehouse ... more15 miles from the Legendary Hershey Car Show and Flea Market.
Buy It Now
Condition: Used Location: Hollywood, United States vintage 70s? Atlas metal lathe. Condition is Used. Local pickup only.
1d 19h 33m 22s 1 bids
$3000.00 Now
Condition: Used Location: Hutchinson, United States Untitled Document Free. Fast Shipping Every Business Day! Atlas Press Company NOS. 3980. 3981, 3982, 3983, 3990, AND 3991 12-inch Atlas Backgeared Screw ... moreCutting Lathe Click for Our Complete Catalog Manual Description: Number of Pages: 21. This is a reproduction. Not a photocopy, of an original 12" Atlas Backgeared Screw Cutting Lathe for models 3980, 3981, 3982, 3983, 3990, and 3991. This was also sold under the Craftsman brand name. This manual contains information on setup. Lubrication, maintenance, and controls as well as a complete parts list and exploded views and adjustments. This manual has a excellent description of removing the headstock spindle, removing the back gears, assembling the back gears, and resembling the headstock spindle. This manual also has a very excellent and very important description on adjusting the spindle and back gear, with Timken Bearings this is critical. Another nice thing about this manual is the electrical diagram at the end. Don't forget to check out my! Contents: Horizontal Countershaft Lathe Mounting.2 Underneath Drive Lathe Mounting.2&3 Leveling The Bed.3 Lubrication.3 Operations and Controls.4 Selection of Threads and Feed.5 Setting Tool Bits.6 Threading Adjustments.6 Headstock.7 Quick-Change Gear Box.8 Saddle and Slides.9 Apron.10 Bed and Tailstock.11 Tumbler Assembly.12 Horizontal Countershaft Assembly.13 Guards Assembly.14 Underneath Drive Assembly.15 Cabinet Assembly.
$24.75 Shipping Condition: Used Location: Sultan, United States I sold one of these several months back, but this one is far nicer and is actually marked with all of the numbers and the decal part number 103.1 and ... moreor 6885–1I believe these were maybe aftermarket used on many of the Craftsman atlas lathe probably on the 618 or the one01 or maybe even other models I’ll let you decide for yourself. Look at pictures carefully and thanks again.. everything moves as it should Appears to be in very good condition
Buy It Now
Free Shipping Condition: New Location: Avon Lake, United States Made from carbon fiber infused super hard polycarbonate. Full Set includes: 2 each 20 32 64 & 1 each 24,36,40,44,46,48,52,54,56.
Buy It Now
Free Shipping Condition: New Location: Merrimack, United States Atlas Craftsman6" Lathe 618 Spindle Lock Wedge Stop. Atlas 618 Spindle Stop Wedge. slides onto the bull gear on the spindle of the 618-101 style lathes ... morewith a backgear setup so that you can remove safely the spindle chuck without breaking teeth on the gear by wedging other things into the spindle to try and hold the shaft while rotating the chuck on or off.
Buy It Now
Condition: Used Location: Freeland, United States
Buy It Now
$33.65 Shipping Condition: Used Location: Youngstown, United States Will combine shipping. G2
Buy It Now
$36.05 Shipping Condition: Used Location: Youngstown, United States Will combine shipping. G2
$8.00 Shipping Condition: Used Location: Salt Lake City, United States Ball Crank Compound Slide Handle for Atlas/Craftsman 10" 12" lathes Part# L2-61 Good condition. Please see my other listings for more machinist's ... moretools. Tooling, parts and accessories. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1494a24ac71-0x10e-
Buy It Now
$18.40 Shipping Condition: New Location: Berrien Springs, United States Boring, Turning and Facing Tool Holder, fits tool bit up to 1/2" and round shank tool bit up to 7/16" (#250-102). Turning and Facing Tool Holder, fits ... moretool bit up to 1/2" (#250-101).
Buy It Now
Free Shipping Condition: Used Location: San Ramon, United States Atlas Craftsman 10" 12" Metal Lathe Atlas 3 Jaw 5" Self Centering Chuck BB-435 with a threaded bore 1-1/2" 8 TPI. Comes with wrench/key shown. In good ... moreworking condition, but has scratches, signs of use and surface marks.Please view all the pictures to see what is included and condition of items. Thank you!Free shipping to all 50 States!!! Thanks, Steve
Buy It Now
$10.60 Shipping Condition: Used Location: Watsontown, United States This is a 2 1/2\" four-way indexing tool post metal lathe with Atlas Craftsman Model 2-1/2-S. The machine type is metal lathe and its brand is ENCO. This ... moremetalworking equipment is perfect for those in the CNC, metalworking, and manufacturing industries. It is ideal for those who need to make precise cuts and shapes on metal materials. The product is used, but still in excellent working condition.
Buy It Now
$9.00 Shipping Condition: Used Location: Virginia Beach, United States A whole lot of craftsman 618 lathe parts. You make the call if these are the parts you want.
Buy It Now
$30.00 Shipping Condition: Used Location: Pomona, United States MILLING ATTACHMENT FOR AN ATLAS CRAFTSMAN 618 6" 101 LATHE. PART NUMBER M6-501. ALL SET SCREWS ARE PRESENT. DIAL INDICATOR IS CLEAR AND LEGIBLE. ... moreMILLING VISE IS IN EXCELLENT SHAPE. COMES WITH PINS M6-309. OVERALL A VERY NICE UNIT. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$16.00 Shipping Condition: Used Location: Baldwin Park, United States ORIGINAL ATLAS CRAFTSMAN 12" METAL LATHE MACHINIST STEADY REST TOOL PT# L3-326. ALSO INCLUDED IS A SECOND SET OF FINGERS. Original shipping for returned ... moreitems is not refunded. Any box shown in the photo is for information purposes only and may not be included when the item is shipped. To facilitate shipping. If you specifically want the box please let me know. International buyers contact me for a shipping quote. International shipping will be by USPS priority mail. Or Express mail. I do not ship International First Class because there is no tracking or insurance. For Alaska. Hawaii. And US territories Shipping may be higher. Contact me for a shipping quote. A $5.00 handling fee will be added to International orders. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Contact me with any questions via ebay or call 610-449-1218. I will combine shipping on multiple orders.
Buy It Now
$10.40 Shipping Condition: New Location: Berrien Springs, United States Atlas 10- 12" Lathe Split Nuts. Guide, Spring, Ball with mounting hardware 10F-12X 3/4" Lead Screw- Craftsman 101.07403 This listing is for ... morea set of Atlas 10- 12" Lathe Split Nuts. Guide, Spring, Ball with mounting hardware 10F-12X as shown in the photos. In good condition. These work with a 3/4" Lead Screw. This was ordered new from Clausing in 2001 and it looks like the lathe was hardly used after being refurbished. The scroll and lever are listed separately. These parts came off of a 101.07403 Craftsman lathe that was the cleanest lathe I have ever bought. I got the history with it and it showed lots of purchases of parts to make this lathe issue-free. Check my other listings under! I am happy to combine shipping to save you money-just put your items in to the eBay"cart" and then buy them all at once and let me invoice you with correct shipping before you pay. If that is too complicated. Just buy and I will refund shipping but that costs me more in eBay fees. $3.95 Flat Rate SHIPPING anywhere in the lower 48 States. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
Buy It Now
Free Shipping Condition: Used Location: Anderson, United States In good working condition, but has scratches, signs of use, missing paint and surface marks.
Buy It Now
$32.20 Shipping Condition: Used Location: Youngstown, United States Email any questions. b1
Buy It Now
$8.95 Shipping Condition: Used Location: Youngstown, United States Email any questions. Will combine shipping. G3
Buy It Now
$6.05 Shipping Condition: New Location: Merrimack, United States This part replaces that missing crossfeed thumb wheel handle.
Buy It Now
$35.15 Shipping Condition: Used Location: Youngstown, United States Will combine shipping. b3
Buy It Now
$6.23 Shipping Condition: Used Location: Glenmont, United States For your consideration 1 Atlas- Craftsman 6" Metal Lathe Model#101.21400 Leadscrew with banjo bracket and gears. All parts in pictures are included. ... moreFront and rear leadscrew supports with screws. 2 banjo gears with all the screws to mount them. Locking collar with set screw included. Leadscrew gear keyway key and bolt included. The leadscrew gear is not included only the 2 banjo gears. All described parts in this auction are in excellent condition. Flat rate shipping is for the lower 48 USA only. Thank you for looking. The lead screw is 32" end to end. Threaded length is 22" 16 threads per inch.
Buy It Now
Condition: Used Location: Waynesboro, United States Atlas 6inch metal lathe with lots of extra parts works great I have all the paperwork owners manual parts list places to order replacement parts and receipts ... morefor everything
Buy It Now
Free Shipping Condition: Used Location: Portland, United States This is in good working condition and everything looks good on it. I see no cracks or damage. It spins in and out smoothly.
Buy It Now
$18.40 Shipping Condition: New Location: Berrien Springs, United States Boring, Turning & Facing Tool Holder, fits tool bit up to 1/2" and round shank tooling up to 1/2". Knurling and Turning Tool Holder.
Buy It Now
Free Shipping Condition: New Location: Brandon, United States FREE SHIPPING IN US! Atlas/ Craftsman 9" 10" 12" Lathe Steady Rest Jaws/ Fingers with Bearings. New Steady Rest Jaws/ Fingers with Roller ... moreBearings for Craftsman Model 101 and Atlas 9" 10" 12" Lathes. Take those oily& messy brass fingers out and replace them with these smooth running roller bearings! 1] Set of 3 Fingers- they are 3/8" x 7/16" and 2-5/16" long with 1/2" diameter shielded bearings. Fits Atlas& Craftsman Steadyrest with casting numbers 9-326. 10-328T and 10-326B commonly used on the following models of Craftsman Lathes: 918, 10128900, 10128910, 10128930, 10128940, 10128950, 10128970, 10128980, 10128990, 10128991, 10127590, 101.07403, 101.27430, 101.27440. And the following models of Atlas Lathes: TH36. TH42, TH48, TH54, TV36, TV42, TV48, TV54, H36, H42, H48, H54, V36, V42, V48, V54, QC42 and QC54. I leave Feedback at time of shipping to notify buyer of shipment. No feedback ransoming here! Questions? email me! Thanks for looking. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Posted with
Buy It Now
$6.05 Shipping Condition: New Location: Merrimack, United States The tray sits anywhere along the bed and is able to be slid around depending on where the cutting is happening. Atlas Craftsman Unique GREY Chip Tray ... morefor 6". This little tray catches that debris and allows for easy empty after regular use.
Buy It Now
$6.00 Shipping Condition: New Location: Berrien Springs, United States
Buy It Now
$10.40 Shipping Condition: New Location: Berrien Springs, United States NEW FACTORY OEM ATLAS CRAFTSMAN 10-12 LATHE 10F-11 TRAVERSE GEAR CASE NEW PART Click to Enlarge Click to Enlarge NEW FACTORY OEM PART ATLAS CRAFTSMAN ... more10-12 INCH LATHE 10F-11 TRAVERSE GEAR CASE. FOR LATHES WITH 3/4 LEADSCREWS AND POWER CROSSFEED.THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Buy It Now
$10.40 Shipping Condition: New Location: Berrien Springs, United States New OEM 341-051 Mitre Gear for Power Crossfeed Assembly. Fits 10" & 12" Atlas / Craftsman lathes.
Buy It Now
Free Shipping Condition: New Location: South Whitley, United States SOUTH BEND& OTHER MACHINE HEADSTOCK DRIVE FLAT BELT NEW. CAN BE USED FOR OTHER APPLICATIONS. This listing is for up to 1" Wide up to 80" ... morelong. Multi-ply composite(transmission) belt custom cut. Description of our CB 15 Transmission Belt Top and Bottom surfaces: Covers of natural and synthetic rubber blends are designed to protect the carcass from abrasion. Impact, Deterioration and other injurious influences. They can be compounded to meet particular service. Conditions such as oil. Heat, abrasion, etc. 3 Ply. Approx. 1/8" to 5/32" thick. The strength portion of the belt consisting of multiple piles of solid woven. Rubber impregnated fabric, Bonded together with friction and skim coats. The fabrics most commonly used are nylon. Cotton duck, Vinylonnylon. Rayon and polyester. Hope this helps. Please check you belt length before bidding not all models are the same. If you not sure about the length of you belt check it with a string around the pulleys or wrap a soft measuring tape around your pulleys. And take the reading. Your belt is delivered with alligator lacing attached and a connector pin ready to use. Excellent traction. Wear and oil resistance. This belt will outlast your machine. After winning item please leave a message when paying with PayPal on send a message to seller section, width& length, or send a message through eBay. Thank you. PLEASE CHECK OUR FEEDBACK FOR CUSTOMERS SATISFACTION. If you need different size belts please email me with your requirement at samhamen@yahoo.com for a quote. Please ask any questions you may have before bidding and GOOD LUCK. International Buyers please email me for correct shipping charges before buying Please look over the pictures& ask any questions you may have prior to bidding. I'll be happy to try to answer any questions you may have- e-mail me and I'll get back to you as soon as possible. When you leave positive feedback for me. It tells me you are pleased with the item/transaction. I will then leave positive feedback FOR YO
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS BEVEL GEAR 9-49A (Slider) for reverse lead screw gearbox. Atlas and Craftsman 9-10 and 12" lathes. SEE PHOTO KEY! LATHE NOT INCLUDED. ... morePhoto 3:Example of Model D lathe the part fits.
Buy It Now
$18.40 Shipping Condition: New Location: Berrien Springs, United States #2Morse taper collet set with handwheel drawbar closer to fit Atlas & Craftsman 6" lathes.
Buy It Now
$85.99 Shipping Condition: Used Location: Lombard, United States Used condition, original paint, overall nice shape some surface rust spots to the metal surfaces. Hand crank turns freely. Please see photos for details ... moreand condition. Any information on this item would be greatly appreciated. Thanks for looking Shipping price to the lower 48 only No po box shipping
Buy It Now
$25.00 Shipping Condition: Used Location: Manchester, United States Williams Lantern Style Lathe Tool Holders (South Bend Craftsman Atlas). Left hand and neutral tools hold a 3/8 square shank tool
|
|
|
|
VINTAGE 1956 ATLAS LATHE & ACCESSORIES CATALOG BROCHURE COMPLETE
UP FOR AUCTION IS A VINTAGE 19 56 ATLAS LATHE& ACCESSORIES CATALOG WITH PRICE LIST. 36 PAGES. NO TEARS, IN VERY GOOD CONDITION. COM BINED SHIPPIN G ON ALL AUCTIONS. INTERNA TIONAL BUYER S. PLEASE CON TACT ME FOR SHIPPING COSTS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13d22b5f3f9-0xf7-
|
|
|
VINTAGE 1941 ATLAS LATHE & ACCESSORIES CATALOG BROCHURE COMPLETE
UP FOR AUCTION IS A VINTAGE 1941 ATLAS LATHE& ACCESSORIES CATALOG WITH PRICE LIST. 72 PAGES, NO TEARS, IN VERY GOOD CONDITION. COM BINED SHIPPIN G ON ALL AUCTIONS. INTERNA TIONAL BUYER S. PLEASE CON TACT ME FOR SHIPPING COSTS. On Feb-24-13 at 17:24:05 PST. Seller added the following information: 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13d22b5f471-0xfb-
|
|
|
1939 RARE ATLAS SHOP EQUIPMENT CATALOG LATHE DRILL PRESS & MORE WITH PRICE LIST
1939 RARE WAR TIME ISSUE ATLAS- SHOP EQUIPMENT CATALOG INCLUDES: LATHES. DRILL PRESSES, MORE INCLUDES RARE PRICE LIST GUIDE ITEM: You are looking at the original tool guide. And matching price guide listed above. These books are in GREAT shape with little to no wear. Were stored and owned by a collector, as they are a collectors must have. Please see the pictures I have provided of the actual copy's you are bidding on. If you have any questions, or would like to see more pictures just write me. Thanks for looking, and check out my other auctions to see more items like this! SHIPPING: We have been shipping items around the world for 10 years. And have a lot of experience in getting these great items to you. Please let us know before you make a payment if you would like any special shipping options including: insurance, fast delivery, multi ... moreitem purchase, etc. If we do not hear anything, the item will be mailed regular service. Regular service is what is listed on the EBAY shipping calculator. Please contact us at anytime with any questions, we are here to help. PLEASE ASK ALL QUESTIONS BEFORE BIDDING Thank you for looking,
|
|
|
Atlas Craftsman 10" metal lathe turret machinist toolmaker
Atlas Craftsman 10" metal lathe Turret in good used condition Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item after it is shipped, I will accept returns but ... morethe buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, please contact me if you have not received your item within 30 days. Please do not ask me to mark items with a lower value or mark as a gift. US and international government regulatio
|
|
|
3 AT Collets Royal Products Plainview NY USA Lathe Craftsman Atlas South Bend
Metal wood hobby tooling. Shipping only to USA Please. 9/64 11/64 15/64 19/64 21/64 23/64 27/64 29/64 8pcs. w boxes 3AT collets. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Craftsman Lathe 5" 3 Jaw Chuck - 101.21651-H from England - 1 1/2 X 8 TPI Atlas
Craftsman Lathe 5" 3 Jaw Chuck- 101.21651-H from England- 1 1/2 X 8 TPI This listing is for a Craftsman Lathe 5" 3 Jaw Chuck- Made in England- 1 1/2 X 8 TPI. Very nice with some darkening as seen in the photos. It is marked 101.21651-H on the front and dated 6/1956. No key is included. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $9.95 SHIPPING anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave ... morefeedback as soon as the buyer does!
|
|
|
Craftsman 12" Lathe 101.27440 Countershaft Assembly with Motor Mount - Atlas
Craftsman 12" Lathe 101.27440 Countershaft Assembly with Motor Mount This listing is for a Craftsman 12" Lathe 101.27440 Countershaft Assembly with Motor Mount. The assembly appears to all be original. And in good condition and with most of the original paint. I powerwashed it so you can see the condition in the photos. The main bracket is L8-20 and it has the 2 step pulley for the motor and 4 step pulley to the lathe. This assembly came off a 12" X 36" Craftsman 101.27440 lathe but also works with many lathes. As well as some Atlas lathes. It mounts on the back of the lathe bed foot with a hinge pin. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $19.95 FEDEX SHIPPING anywhere in the lower 48 states. I will have to partially ... moredisassemble to get it in a box safely. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
|
|
|
Craftsman 12" Lathe 2 Step Motor Pulley 10-428 with 5/8" bore- Atlas
Craftsman 12" Lathe 2 Step Motor Pulley 10-428 This listing is for a Craftsman 12" Lathe 2 Step Motor Pulley 10-428; you can see the condition in the photos. The bore is 5/8" with a keyway and a setscrew. The large pulley diameter is 4 1/2" and the small is 2" This pulley came with a 12" X 36" Craftsman 101.27440 lathe but also works with many lathes. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $5.95 SHIPPING anywhere in the lower 48 states. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since ... moresome buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
|
|
|
Craftsman Lathe 1/3 HP Motor with Forward/Reverse Furnas Rocker Switch Atlas
Craftsman Lathe 1/3 HP Motor with Forward/Reverse Furnas Rocker Switch This listing is for a Craftsman Lathe 1/3 HP Motor with Forward/Reverse Furnas Rocker Switch. The Motor is badged Craftsman and is 1750 RPM. It has ball bearings and a two-ended 1/2" shaft. The Furnas switch is Model A-14. Rated for 1 HP, and in good condition. The wiring is not great but will serve as a guide for putting in the length of wires you need for your set-up. There is a separate ON/OFF switch on the motor, but you cannot use it and the Furnas switch together the way it is wired. This assembly came off a 12" X 36" Craftsman 101.27440 lathe but also works with many lathes. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $24.95 FEDEX SHIPPING anywhere in ... morethe lower 48 states. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
|
|
|
Pair Atlas Lathe Cast Iron Legs 10D-441 Table Bench Industrial Age Craftsman
Pair of Atlas Lathe Cast Iron Legs 10D-441 This listing is for a Pair Atlas Lathe Cast Iron Legs 10D-441. The legs are in great condition except for surface rust at the feet where they contacted concrete floors. As can be seen in the photos. OPTIONAL: The last photo shows the bench top and shelf that came with these legs. The are available for $85.00 plus shipping. But are not included in the listing price. The top measures about 57" and the shelf is 54" and they are in great condition with 4 holes for mounting to the legs and the top has three studs sticking up to mount the lathe on. If you need a shorter bench I also have a set that measure 45" for the top and 42" for the shelf that are butcher block construction for the same price. The shipping weight will be 60lbs. If you are interested. Contact me and I can send additional ... morepictures. This pair came off a 12" X 36" Craftsman 101.27440 lathe but also works with many lathes. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $95.00 UPS SHIPPING anywhere in the lower 48 states. I might use Fedex depending on the location. I will have to build a wooden box to ship these in so allow extra time for shipping preparation. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
|
|
|
Atlas Craftsman 109 Metal Lathe
I'm selling this nice little Craftsman 109 Lathe- just bought a few months ago. Cleaned it up and built a few small parts, then got a chance to upgrade to bigger machine so I'm gonna let this one go. It runs pretty smooth and quiet for one of these old machines. It comes with everything that I got with it- pretty complete from what I can gather- see the picture for details: I will disconnect this from the old board it is mounted on to make shipping easier. The motor will come with it. But you will need to find your own chunk of plywood to mount it on. 3-Jaw Chuck 4-Jaw Chuck Face plate and Lathe Dog Set of change gears(complete I believe) Two drill chucks Dead Centers Some tooling Sorry about the shipping costs. this thing is heavy and I'll probably have to send it in two crates to make sure you get it safely. This is old machinery. ... moreSo the usually caveats apply: as-is, no returns.
|
|
|
Machine Metal Working Atlas/Clausing 12" Lathe #100-2
12"X36" Atlas/ Clausing lathe. Lathe is in working order has been cleaned and gone through. Is missing gear cover, still needs a few parts to be in full working condition. It cuts good and apron and cross feed both run well with power feed. Lathe comes with(1) Rocker style tool post holder, 1) 8" 3 jaw chuck, 1) 8" 4 jaw chuck, 1) 1/2"MT#3 Jacobs chuck, 2) face plates, 1) 1/2"spindle Jacobs Chuck,3) Lathe dogs, 1) 9/16"to 2" MT#3 Bull nose live center, 3) MT#3 Dead Centers, 1) MT#3 live center, 1) Atlas Cross feed milling attachment, 1) Atlas steady rest. Orange metal stand NOT INCLUDED. Buyer is responsible for shipping. I am willing to pallet shipment for $50.00 we have checked on shipping prices and we can send it through our business truck freight for around $500.00. Or buyer can local pickup. We ... morehave also listed this in other classifieds so listing may be pulled early if it sells through another source. Please ask questions before bidding there will be no returns accepted on this item. As is no warranty HAPPY BIDDING.
|
|
|
Logan Lathe 6" 4 Jaw Chuck with Key - Made in USA - 1 1/2 X 8 TPI - Atlas
Logan Lathe 6" 4 Jaw Chuck with Key Made in USA- 1 1/2 X 8 TPI This listing is for a Logan Lathe 6" 4 Jaw Chuck with Key- Made in USA- 1 1/2 X 8 TPI. With reversible jaws, very nice as seen in the photos.It is marked 444 on the front and dated 6/1956. The included key is shopmade. The lathe I took this off of was a model 210. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $9.95 SHIPPING anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden ... morethem down with more of it, but I leave feedback as soon as the buyer does!
|
|
|
ORIGINAL CRAFTSMAN "60" 1/3 HP SPLIT PHASE METAL LATHE MOTOR ATLAS 115.9660
ORIGINAL CRAFTSMAN M OTOR"60" 1/3 HP SPLIT PHASE 5/8" SHANK W/ KEY MODEL 11 5.19660 The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
|
|
|
ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-101X 10 PIECE CHANGE GEAR SET FINE USED
ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-101X 10 PIECE CHANGE GEAR SET FINE USED Click to Enlarge ATLAS CRAFTSMAN M6-101X 10 PIECE CHANGE GEAR SET FOR 6 INCH SWING LATHES. ALL GOOD USED. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
VERY NICE ORIGINAL ATLAS CRAFTSMAN 10 12 LATHE BULL GEAR BACK GEAR PART 10-241
Very Nice- Original headstock bull gear/ back gear for a 10" Atlas or 12" Craftsman 101 series lathe. Part number 10-241. Interior bore is 1 1/2" All in very fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Atlas Craftsman 10" - 12" metal lathe Threading dial Indicator
Craftsman atlas 10" 12" lathe threading dial/ indicator with bolt.in good used condition Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item after it is ... moreshipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, please contact me if you have not received your item within 30 days. Please do not ask me to mark items with a lower value or mark as a gift. US and in
|
|
|
ATLAS CRAFTSMAN 6" METAL LATHE FOLLOWER REST
ATLAS M6-396 FOLLOWER REST IN VG CONDITION
|
|
|
Atlas No. 10100 Machine Lathe
Atlas model number 10100 6" swing machine lathe. Comes with 3 jaw and 4 jaw chucks. Gear set, box of cutters and gizmos. Please check out the photos carefully as I don't know much about machine lathes. Please ask any questions and I will try to answer as best I can. Everything is classic American made by one of the best machine companies. Numerous accessories including additional gear set. Another chuck, box of tool steel cutters, and shop manual. I am located in Davis California so keep that in mind as there is no shipping being offered. 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13dfdf3ba20-0xff-
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 20 Tooth / A 151
Hello Folks. This is an Atlas 20 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 40 Tooth / A 161
Hello Folks. This is an Atlas M6-40 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Craftsman quickchange gearbox lathe bracket atlas
For sale is a used bracket for a 12 inch Craftsman Commercial metal lathe. It is part number L6-1002 and is for the quickchange gearbox. No cracks or repairs and is in dirty. But good condition.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 36 Tooth / A 159
Hello Folks. This is an Atlas M6-36 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 46 Tooth / A 165
Hello Folks. This is an Atlas M6-46 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 32 Tooth / A 157
Hello Folks. This is an Atlas 32 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 44 Tooth / A 163
Hello Folks. This is an Atlas M6-44 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 24 Tooth / A 153
Hello Folks. This is an Atlas 24 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Countershaft Assembly for Craftsman / Atlas 101.07403 12" Lathe
Countershaft Assembly for Craftsman/ Atlas 101.07403 12" Lathe. One of the oiler cup covers is missin g. Otherwise in nice condition. Shou ld a lso fits 10" Craftsman/ Atlas Lathe. Please check fitment before bidding. Please see my other listings for more Crafts man/ Atlas Lathe Parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Cross Slide Chip Guard for Craftsman / Atlas 101.07403 12" Lathe
Cross Slide Chip Guard 9-37A for Craftsman/ Atlas 101.07403 12" Lathe. Will also fit Craftsman/ Atlas 10" models. Please see my other listings for more Crafts man/ Atlas Lathe Parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Tailstock Assembly for Craftsman / Atlas 101.07403 12" Lathe - Complete
Tailstock Assembly L4- 5 for Craftsman/ Atlas 101.07403 12" Lathe. Ram is in great condition. Operat es smoothly. All machine d s urfaces are in excellent shape and show very m inimal signs of any wear. Includes bed clamp and bol t. Ship s par tially disassembled to ensure sa fe delivery. Please see my other listings for more Crafts man/ Atlas Lathe Parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Apron Miter Gear and Bushing for Craftsman / Atlas 101.07403 12" Lathe
Apron Miter Gear and Bushing for Craftsman/ Atlas 101.07403 12" Lathe. I believe that this also f its 10" models. Please check fitment befo re bidding. Gear in good shape n o chips or missing teeth. Free Shipping. Please see my other listings for more Crafts man/ Atlas Lathe Parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Complete Back Gear Assembly for Craftsman / Atlas 101.07403 12" Lathe
Complete Back Gear Assembly for Craftsman/ Atlas 101.07403 12" Lathe. I believe that this will only fit the Craftsman branded models as the parts list for the Atlas branded versions appears to have a different m oun ting configuration. No chipped or broken teeth. May also fit 10" lathes. Please see my other listings for more Crafts man/ Atlas Lathe Parts. Free Shipping. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
WILLIAMS KNURLING TOOL 2040 4 SOUTH BEND ATLAS CRAFTSMAN LATHE 3/8" SHANK
Original Williams knurling tool. Stamped"NO. 2040 KNURLING TOOL HOLDER" on one side and"J.H. WILLIAMS& CO. DROP-FORGED IN U.S.A. on the other. Shank is 3 1/8" long. 3/4" high and 3/8" thick. Some marks noted. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
JH WILLIAMS 2010S STRAIGHT TOOL HOLDER FOR ATLAS CRAFTSMAN SOUTH BEND LATHE.
Up for auction is a 2010S turning-tool holder by JH Williams and Co. Drop forged construction. Part is in good conition! The other piece is an older generation 2010S'Homecraft' It is damaged& probably not usable. But I will throw it in at No Charge(in case you can use it for something. The printing is Raised on this older one, too bad it is damaged! No reserve sale. Good Luck!
|
|
|
Vintage Lantern Tool Post for Atlas, Craftsman, South Bend Metal Lathe
For auction is a lantern style tool post for an Atlas/Craftsman/South Bend/ Dunlop metal lathe. It can hold up to a 3/8" wide tool bit. And is in good working condition. For the various dimensions of this tool post please use the tape measure in the attached photographs for reference.This item is in used condition, and some small surface imperfections that were produced from normal use that can be seen in the photographs should not impair the functionality of the tool post. It is being offered in as-is condition.
|
|
|
HARDINGE LATHE 8-POSITION MICROMETER SADDLE STOP -ENCO COLCHESTER RIVETT ATLAS
This is an 8-position'stop' for lathe. Mill or grinder etc. I believe it's from a Hardinge chucker lathe. Great quality and good condition(missing a couple of screws) It rotates and clicks into position nicely. Could be used on many different machines. Dimensions are shown in the pictures. Don't miss this as it includes super-fast FREE priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments ... moreon fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
6" Atlas Lathe Lot 4 Jaw 4" Chuck Dog Arbor Morse Taper Centers Tools Low$ !!!!!
6" Atlas Lathe Lot•4" 4 Jaw Chuck. 1-5/8" Thick w/out backside lip•appears to have 1" Dia. Mounting hole w/ 7 threads•With Chuck Key• Clamp Dog. Clamp has to V grooves in center, and adjustable stud• work arbor. For mounting chucks; holding& grinding, has two steel flanges with a nut on head end for clamping wheels• Morse Taper no. 2. Jacobs Taper no. 33• Center Tools This is a nice Set of Lathe Tools/ accessories All pieces in great shape! And available for a great low $$! Enjoy! Ships to 48 Continental U. S. States only Posted with
|
|
|
ORIGINAL ATLAS 10" METAL LATHE GEAR GUARD BRACKET HINGE CLAMP & PIN PART 9-95A
Excellent Condition- Original gear guard bracket assembly for an Atlas 10" lathe. Includes bracket. Clamp, knurled pin and hardware, all in very fine order. Bracket is part number 9-95A. Retains original paint. Clean solid assembly. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ATLAS CRAFTSMAN 6 INCH LATHE COMPLETE CHANGE GEAR BOLT AND BUSHING SET FINE USED
ATLAS CRAFTSMAN 6 INCH LATHE COMPLETE CHANGE GEAR BOLT AND BUSHING SET FINE USED Click to Enlarge CLEAN AND F INE USED ATLAS CRAFTSMAN 101 618 6 INCH LATHE COMPLETE CHANGE GEAR BOLT AND BUSHING ASSEMBLY. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
ATLAS CRAFTSMAN 10 INCH LATHE COMPLETE QUICK CHANGE GEARBOX CONVERSION KIT
ATLAS CRAFTSMAN 10 INCH LATHE COMPLETE QUICK CHANGE GEARBOX CONVERSION KIT Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge USA MADE AND GOO D USED O'BIEN CHICAGO ILLINOIS MADE QUICK CHANGE GEARBOX CONVERSION KIT FOR ATLAS 10 INCH LATHES. EVERYTHING YOU NEED TO MOUNT AND OPERATE. GEARS IN GOOD SHAPE. ONE DOES SHOW MORE USE THAN THE OTHERS. ALL TEETH ARE INTAC T. COMES WITH TUMBLER ASSY AND PLATE THAT MOUNTS WHERE THE SWITCH GOES THAT HAS THE HOLES FOR THE TUMBLER SO YOU CAN SELECT FWD.REV AND NEUTRAL POSITIONS. TO INSTALL YOU MOUNT THE TUMBLER AND GEAR BRACLET ON THE END OF THE GEARBOX AND SLIDE THE GEARBOX OVER THE 3/8 RAIL UNDER THE HE ADSTOCK AND ALIGN THE BRACKET AND GEARS ON THE LEFT SIDE. TH EN TRANSFER AND TAP 3 EACH 1/4-20 HOLES ... moreFRON THE FRON T OF THE GEARBOX. ONCE YOU HAVE THAT ALL SECURE YOU WILL HAVE TO INSTALL YOUR LEA DSCREW. THE E ND OF YOUR MAY HAVE TO BE MODIFIED. THIS ONE WAS SHORTENED ONCE YOU SLIDE THE SCREW INTO THE RIGHT SIDE. THE SUPPLIED GEAR HAS A 3/4 DIAMETER WITH KEY TO MATCH THE LEADSCREW. MARK THE LEADSCREW WHERE IT GOES PAST THE GEAR AND SHORTEN AND TAP A 1/4-20 HOLE IN THE END AND SECURE WITH A BOLT AND WASHER. DO THIS WHILE BOLTING UP THE LEADSCREW WITH THE SUPPORT BRACKET SO YOU CAN GET AN EXACT FIT. TAKES A LITTLE T IME BUT IS WELL WORTH THE EFFORT. PLEASE NOTE THAT ONE OF THE QC ARMS HAS BEEN RELACED AND WORKS FINE. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Gearbox handles for Craftsman lathe atlas southbend logan
Used quickchange gearbox handles from a 12 inch Craftsman Commercial metal lathe. Both handles have"10-1586" cast onto their sides. No gears. One handle is missing the plunger.
|
|
|
ATLAS CRAFTSMAN 6" 618 101 LATHE SADDLE CRANK HANDLE WITH MOUNTING NUT
ORIGINAL ATLAS CRAFTSMAN 6" 618 101 LATHE SADDLE CRANK HANDLE WITH MOUNTING NUT. THERE ARE SOME LIGHT CHROME LOSS ON UNIT BUT DOES NOT AFFECT ITS OPERATION. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOT OF 20 1/4" CUTTING TOOL BITS FOR ATLAS CRAFTSMAN METAL LATHE
NICE LOT OF 20 1/4" CUTTING TOOL BITS FOR ATLAS CRAFTSMAN METAL LATHE. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e059829f8-0xf3-
|
|
|
LOT OF 6 3/16" CUTTING TOOL BITS FOR ATLAS CRAFTSMAN METAL LATHE
NICE LOT OF 6 3/16" CUTTING TOOL BITS FOR ATLAS CRAFTSMAN METAL LATHE. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MT1 ALMOND TAILSTOCK DRILL CHUCK FOR ATLAS CRAFTSMAN 6" 618 101 METAL LATHE
ORIGINAL MT1 ALMOND KEYLESS TAILSTOCK DRILL CHUCK FOR AN ATLAS CRAFTSMAN 6" 618 101 METAL LATHE. ARBOR IS 3 1/4" LONG. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ATLAS CRAFTSMAN 10 12 LATHE COMPOUND REST SWIVEL TOP PINS SHOES HARDWARE 10-309
Original compound rest top swivel pins for a 10" Atlas or 12" Craftsman lathe. Pins are part number 10-309. All in good order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Banjo Mountng Bracket Assembly Craftsman / Atlas 101.07403 12" Lathe
Banjo Gear Mounting Bracke t Ass embly for Craftsman/ Atlas 101.07403 12" Lathe. Includes bracket. Stud, bush ing and was hers. Also fits 10" Craftsman/ Atlas Lathe. Please see my other listings for more Crafts man/ Atlas Lathe Parts. Free Shipping. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
MT2 DEAD CENTER LATHE TOOL 4 SOUTH BEND ATLAS CRAFTSMAN LOGAN MACHINIST
Very Nice- MT2 dead center. Measures 3 7/8" long. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Craftsman 12" Commercial Lathe Countershaft 4-Step Pulley 10-80 Atlas
Craftsman 12" Commercial Lathe Countershaft 4-Step Pulley 10-80 This listing is for a Craftsman 12" Commercial Lathe Countershaft 4-Step Pulley 10-80. As shown in the photos. These parts came off of a 101.28910 lathe. And the large diameter step is 6" and the inside step is 3" with 1/2" belt grooves and a bore of 3/4" with 3 setscrews mounting. The lathe I took this off of was a model 101.28910. From what I can tell. Atlas used the number 3981 on this 12" X 36" bench mount model. I am starting to list the parts from this lathe so check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $8.95 Flat Rate SHIPPING anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! ... moreI take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
|
|
|
ATLAS CRAFTSMAN 10/12" LATHE COMPOUND/TOOL SLIDE LARGE DIAL
The 1" diameter Atlas and Craftsman cross feed and compound dials are ridiculously small and have lightly impressed gradations. I had a couple larger dials laying around that looked like they would be an improvement over the originals. These dials are only 1/4" larger but. Have clearer numbers and gradations. I've included a couple of comparison pictures to show the difference. It requires reversing the bearing plate and counter sinking the 1/4" holes to accept the new stainless flat head screws that I will include with the new dial. The bearing plate in the pictures is NOT included but is to show what has to be done to yours.
|
|
|
Atlas 6" Lathe Model# 618 Change Gear Bracket / Banjo # M6-25 / A 180
Hello Folks. This is Atlas Part# M6-25 Bracket, good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
ATLAS CRAFTSMAN 6” 618 101 LATHE HEADSTOCK PULLEY PART 2140-10 M6-79
Nice original 4 step headstock pulley and gear with bushings assembly for a 6" Atlas 618 or Craftsman 101 lathe. Pulley and gear. Part number M6-79. Unit is also known as part number 2140-10. Will always combine shipping when possible. Any questions feel free to e-mail. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13e066579e4-0xf6-
|
|
|
ATLAS CRAFTSMAN 618 6" LATHE TAILSTOCK CLAMP AND BOLT ASSEMBLY M6-7
ORIGINAL TAILSTOCK CLAMP AND BOLT FOR AN ATLAS CRAFTSMAN 618 6" LATHE. PART NUMBER M6-7. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL ATLAS 10" LATHE QUICK CHANGE GEARBOX UPPER TOP GUARD PART 10-1504T
Original upper gear guard for a 10" Atlas lathe with quick change gearbox. Stamped with part number 10-1504T. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL ATLAS 10" LATHE QUICK CHANGE GEARBOX LOWER END GUARD PART 10-1504B
Original lower gear guard with original knob for a 10" Atlas lathe with quick change gearbox. Stamped with part number 10-1504B. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Atlas # M6-326 Steady Rest 2 3/8" Max - 6" Lathe / A 133
Hello Folks. Today we have the Atlas# M6- 326 Steady Rest, clamp, custom( long nut) bolt. It is in very good, used condition, no damages. 2 Bronze fingers and 1 steel finger. 1 5/8" space needed between rails, please see close up pic. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e067ea90a-0xf4-
|
|
|
Atlas Craftsman 10" 12" Lathe Traverse Gear Case Assembly Part # 10F-11X
Up for bids is a Traverse Gear Case Assembly. Part# 10F-11X for a Atlas or Atlas/ Craftsman 10" or 12" lathe in great condition. Included is the Gear Case, part# 10F-11; Shaft, part# 9-68; Gear, part# 9-102-12S; and Gear, part# 9-102-24. There are no chipped teeth, very minimal wear on the gears, the brown in the photos is grease and toning, no rust. This came off a 10" Atlas Lathe Model H-42, but will fit a 10" TH36, TH42, or H36 model Atlas lathes, a 12" Atlas lathe or Atlas/ Craftsman Model 101.07403, 101.27430, 101.27440. If you have any questions feel free to ask and I will do my best to answer. Buyer pays shipping on this item, calculated shipping price includes insurance and delivery confirmation. Thanks for looking and have a great day.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 48 Tooth / A 167
Hello Folks. This is an Atlas M6-48 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 52 Tooth / A 169
Hello Folks. This is an Atlas M6-52 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 54 Tooth / A 171
Hello Folks. This is an Atlas M6-54 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 56 Tooth / A 173
Hello Folks. This is an Atlas M6-56 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Atlas Models 618 /101 Metal Lathe Change Gear - 64 Tooth / A 175
Hello Folks. This is an Atlas M-64 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
SET OF (17) CHANGE GEARS - QUALITY LATHE MILL GRINDER ATLAS LOGAN SOUTH BEND
This is a used set of(17) change gears. They're in great condition with no damage but I have no idea what machine they were made to fit. What you see in the pictures is what is included. Exact dimensions of an 80T gear are shown in the pictures so you can work out the DP etc. The teeth and arbor hole(2 different sizes) sizes are also shown. All the gears are approximately 0.400" thick and they are all marked with a'z' after the tooth number(eg. 80Z. 72Z) Please feel free to ask questions if I've missed something. These are quality made gears and I'm sure they could be adapted for many purposes. Don't miss them as I'm including super fast FREE shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction ... moreend(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedba
|
|
|
ATLAS CRAFTSMAN 6" METAL LATHE HEADSTOCK DRILL CHUCK
DRILL CHUCK AND KEY WITH MT2 TO FIT HEADSTOCK ON ATLAS CRAFTSMAN 6" METAL LATHE. GOOD CONDITION.
|
|
|
HUGE LOT OF 13 GEARS for 6" Atlas Craftsman lathe AND SPACERS - HARD TO FIND
Hello. Thanks for looking! Up for Auction is this: LOT OF 13 GEARS- for 6" Atlas Craftsman Lathe I NCLUDES RARE SPACERS! You are bidding on 13 gears for Atlas 618 Craftsman 101 and MKII lathes. The set includes: 64. 56, 54, 52, 48, 46, 44, 40, 36, 32, 32, 24, 20 NO TEETH ARE CHIPP E D OR BROKEN. They are all sharp and square and in excellent condition. SORRY. But NO INTERNATIONAL BIDS WILL BE ACCEPTED! No bids will be accepted from users with LESS THAN 5 FEEDBACK Payment must be received within 3 Days of Auctions end! ITEMS WILL SHIP WITHIN 2 DAYS OF PAYMENT RECEIVED! Good luck. and happy bidding:
|
|
|
6" Atlas Lathe Lot #2 Jacobs Chuck Tool Holders Gears Cutters & More! Low $$ !!!
6" Atlas Lathe Tools& Accessories Lot! Tons of Attachments. Cutting tools, holders, gears, etc! LOT INCLUDES: Jacobs Chuck 6A. 33 Taper, Cap: 0-1/2" With Chuck Key• Atlas M6-23 Milling Attachment Drawbar& Hand Wheel• There are 3 Different Tool Holders: Armstrong Ace Tool Holder No. 1020-R with a 4" long cutting tool* Armstrong Tool Holder No. 1010-R* and another with a Cutter and no markings) Change Gears( 9 Different sizes) M6-101-56 M6-101-54 M6-101-52 M6-101-46 M6-101-44 M6-101-40 M6-101-36 M6-101-32(2) 3 Grinding/ Cutting Wheels: 9-575A. 9-575B, and B&S Mfg. Co. 1/2" x 1/8" No.3* Very Expensive! 5.5% Co Sq. 1/4" x 2-1/2" Cutting Tools• 60* Wiley& Russell Boring Bit• Mo Max Cutting Tools• Wesson Tools• Cleveland Tool& Die Co. Tools• Chucking Reamer 1/4" There are over 30 Endmills. ... moreCutting Tools, Boring Bits etc! SOME VERY EXPENSIVE! Sizes ranging from: 1/8" 1" Federal Gauge. Full Jeweled, 001" Very Nice! Spacers• Bushing• Nuts• Bolts• Wrenches And More! This Is a Very Nice Lot for anyone with this type of Lathe! These parts. Tools, and accessories will ALWAYS come in handy! I am starting auction at what I feel is practically a STEAL! ENJOY! And GOOD LUCK MY FRIENDS! UPDATE: I'VE DROPPED PRICE ON THIS LOT. This is the LOWEST IM WILLING TO GO! These Lathe Tools are worth MUCH MORE than what I am asking! The Gears and Jacobs Chuck alone rival this Low Price! Ships to 48 Continental U. S. States Only Posted with eBay Mobile
|
|
|
Atlas 6" Lathe Apron/Tailstock Handwheel M6-23 Crank - Craftsman MK2 618 101
Atlas 6" Lathe Apron/Tailstock Crank M6-23 Handwheel This listing is for an Atlas 6" Lathe Apron/Tailstock Crank M6-23 Handwheel. It is in nice condition with all its chrome as can be seen in the photos. It measures about 2 5/8" in diameter and fits a 3/8" shaft. I have several of this. All in excellent condition. I am starting to list the parts from this lathe so check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $2.95 First Class Shipping anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since ... moresome buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
|
|
|
Parting Cutoff Tool Lathe South Bend 9 10 Clausing Atlas Lantern Style Bit
Up for bid is one used HSS Parting tool for old lantern style holders. Double angle style. 09" width of cut, 596" tall, and 4 1/4" OAL Item in the picture is the one you will receive. I do combine shipping. But please let me know if you are bidding on multiple items. I accept PayPal only. I do not ship outside the USA. Thanks for looking. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
ORIGINAL UNION 5 INCH 3 JAW LATHE CHUCK+KEY ATLAS CRAFTSMAN SOUTH BEND LATHE
ORIGINAL UNION 5 INCH 3 JAW LATHE CHUCK+KEY ATLAS CRAFTSMAN SOUTH BEND LATHE Click to Enlarge Click to Enlarge GOOD USED ORIGINAL UNION USA MADE 5 INCH SELF CENTERING CHUCK WITH KEY AND 1 1/2-8 THREADS. JAWS IN GOOD USED SHAPE. KEY SHOWS USE. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Craftsman Sears Atlas 109 6" Metal Lathe 48 Tooth Change Gear 3245 109.21270
The following auction is for a Craftsman Sears 109 6" Metal Lathe 48 Tooth Change Gear Dunlap Atlas 3245 The gear teeth count/part number is 48/ 3245. The gear teeth are in fine condition with some small wear. It is off of a Sears Craftsman 6" Metal Lathe Model 109.21270 See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 3.50 for USPS 1st Class Mail with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
|
|
|
Atlas 10" Lathe Spindle Assembly, Part # 10-31TX, From Babbit Bearing Headstock
Up for bids is a Spindle Assembly. Part No. 10-31BX from an Atlas H42 Lathe which had babbit bearings in the headstock. In fair to good condition. I say fair to good condition due to some parts are worn while others are in good useable condition. Included is Spindle, part# 10-31 in good condition; Back Gear, part# 10-241 in good condition, Pin, Plunger, Spring, part#s 10-256, 9-60, 9-61 respectively; 4 Groove Pulley, part# 10-79 in good to great condition; Back Gear, part# 10-242 in fair condition; Baffle, part# 10A-8 in fair condition; Collar, part# 10A-89; Spindle Gear, part# 9-100-32 in good condition; Woodruff Key No. 9; and Collar, part# 9-32. All parts except the spindle will fit a Timken bearing Atlas 10F or Craftsman 10" lathe and a Craftsman Model 101.07403, 101.27430, or 101.27440 12" lathe. All machined surfaces are clean ... moreof rust. Item is greasy/dirty, needs cleaning. If you have any questions feel free to ask and I will do my best to answer. Buyer pays shipping on this item, calculated shipping price includes insurance and delivery confirmation. Thanks for looking and have a great day.
|
|
|
Atlas 12" Metal Lathe - 29 5/8" L. Bed / F 386
Hello Folks. This bed was cut off at 29 5/8" long. It measures 5 3/4" overall wide, the rails are 1 1/2" wide with 2 3/4" space between them. Has been repainted. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Vintage Craftsman Dunlap 109 Metal Lathe Gear 56 Tooth Double A Atlas?
Gear#3251 56 tooth Good used condition WI Residents add 5.6% Sales Tax
|
|
|
Vintage Craftsman 9-2033 Straight Tool Holder, Atlas 618 Craftsman 101, 6” Lathe
Up for your consideration is a vintage and genuine Craftsman# 9-2033 straight tool holder for the Atlas 618 or Craftsman 101 series 6” metal lathes. This tool holder is in super excellent condition. Gently used only a couple of times. The mounting shank is 5/16” X 5/8” and it takes 3/16” square tool bits. The shank of the tool holder is marked with“Craftsman, no. 2033 Turning Tool Holder” To be sold as Craftsman straight tool holder, 1) tool bit and its original box as you see it pictured. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license• Payment must be made within 4 days
|
|
|
Atlas 10-12" Lathe Spindle with Timken Bearings & Dust Covers - Craftsman 101
Atlas 10-12" Lathe Spindle with Timken Bearings& Dust Covers This listing is for a Atlas 10-12" Lathe Spindle with Timken Bearings& Dust Covers. As shown in the photos. The bearings are dated from early 1951 and turn smoothly. The lathe I took this off of was a Craftsman 101 lathe. But it fits many Atlas lathes. I also have a spindle from a later 12" Craftsman Commercial Lathe if you would rather have that for the same price-just send me a message when you buy. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $10.95 Priority Shipping anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds ... morethe description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
|
|
|
Atlas 10" Lathe Threading Tool Holder for Lantern Post Southbend
Atlas 10" Lathe Threading Tool Holder for Lantern Post Good No Reserve In very good original undoctored. Uncleaned condition- with no cracks breaks or repairs- Really good sound condition- Looks like close to original grind with minimal clamping marks on shank Shank measures 7/8" x 3/8" nominal These will fit any 9/10 inch sized lathe with a lantern tool post such as a southbend or logan. If you find the item incorrectly described or not what you want. Please contact me within a week of receiving the item and I will refund the full item price, not including shipping, when it is returned. return terms apply to domestic purchases only) I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed ... morein the description.
|
|
|
Atlas 10" Lathe Countershaft Assembly No Reserve
Atlas 10" Lathe Countershaft Assembly No Reserve In very good original uncleaned condition- no visble cracks breaks or repairs Complete and ready to put to use. If you find the item incorrectly described or not what you want. Please contact me within a week of receiving the item and I will refund the full item price, not including shipping, when it is returned. return terms apply to domestic purchases only) I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description.
|
|
|
Atlas 10" Lathe Tool Holders Straight & Right for Lantern Post Southbend NR
Atlas 10" Lathe Tool Holders Straight& Right for Lantern tool Post No Reserve In very good original undoctored. Uncleaned condition- with no cracks breaks or repairs- Really good sound condition- Minimal clamping marks on shank Shank measures 7/8" x 3/8" nominal These will fit any 9/10 inch sized lathe with a lantern tool post such as a southbend or logan. If you find the item incorrectly described or not what you want. Please contact me within a week of receiving the item and I will refund the full item price, not including shipping, when it is returned. return terms apply to domestic purchases only) I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description.
|
|
|
Atlas 10" Lathe Lantern Tool Post Complete also South bend ? No Reserve
Atlas 10" Lathe Lantern Tool Post Complete w/ wrench No Reserve In very good original undoctored. Uncleaned condition- with no cracks breaks or repairs- Really good sound condition- Fits shanks that measures 7/8" x 3/8" nominal These will fit a 9/10 inch sized lathe such as a logan or southbend T-nut measures 1-1/2"x 1" x 5/16" body dia 1" If you find the item incorrectly described or not what you want. Please contact me within a week of receiving the item and I will refund the full item price, not including shipping, when it is returned. return terms apply to domestic purchases only) I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description.
|
|
|
Atlas 6" Lathe 618 Thread Indicator -Threading Dial - Craftsman 101
Atlas 6" Lathe 618 Thread Indicator- Threading Dial- Craftsman 101 This listing is for a Atlas 6" Lathe 618 Thread Indicator-Threading Dial- Craftsman 101. As can be seen in the photos. Unpainted with mounting bolt that is functional but not original. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $2.95 Flat Rate SHIPPING anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the ... morebuyer does!
|
|
|
Atlas 10" Lathe Lead Screw Support No Reserve
Atlas 10" Lathe Lead Screw Support No Reserve In very good original undoctored. Uncleaned condition- with no cracks breaks or repairs- Really good sound condition- If you find the item incorrectly described or not what you want. Please contact me within a week of receiving the item and I will refund the full item price, not including shipping, when it is returned. return terms apply to domestic purchases only) I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description.
|
|
|
Atlas 10-12" Lathe Index Pin 10-42A - Craftsman
Atlas 10-12" Lathe Index Pin 10-42A This listing is for Atlas 10-12" Lathe Index Pin 10-42A in good condition. It measures about 1 7/8" tip to tip. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $2.95 First Class Shipping anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
|
|
|
ORIGINAL ATLAS CRAFTSMAN 10 12 IN LATHE MOTOR PULLEY 2 STEP PT NO 10-428
ATLAS 10/12 In. LATHE PART No. 10-428 MOTOR P ULLEY 5/8" B ORE The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
M6-115 Armstrong wrench for Atlas/Craftsman 6" lathe
This is an original Atlas-branded wrench for a 6" Atlas/Craftsman lathe. It is made by Armstrong and is part number M6-115. It is in very good condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13e0a975247-0xf1-
|
|
|
Atlas 6" Lathe Tailstock Arbor Lock Lever Handle 1.35" Craftsman 101 618
Atlas 6" Lathe Tailstock Arbor Lock Lever Handle 1.35" This listing is for a Atlas 6" Lathe Tailstock Arbor Lock Lever Handle 1.35" long with nice chrome as shown in the photos. It is threaded for 1/4" X 20 TPI. There were two sizes of this handle- the one in this listing measures about 1.35" from end to end. The larger one measures about 1.92" and I have one of those listed as well. The lathe I took this off of was a Atlas lathe. But it fits many lathes. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $2.95 Flat Rate Shipping anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer ... morefinds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
|
|
 |