Buy It Now
Free Shipping Condition: New Location: Chino, United States 1/2 HP 50 Gallon Pneumatic Mixer Rung Dope Tank 304 Stainless Blade Barrel Type. Safe and explosion-proof, no sparks. It is the best choice for open liquid ... moredrums. The mixer is easily clamped to the side of the bucket and the chucking angle can be adjusted.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
$15.00 Shipping Condition: Used Location: Bristol, United States working fits most machine 3 phase single phase
Buy It Now
Free Shipping Condition: New Location: Chino, United States Warm tips: The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise a lot of ... moremoisture in the air will run into the motor, resulting in the machine stuck 1.Description It is usd for paint mix in paint factory. It is also used for mixing many kinds of dope. It is also used for homogeneity,dispersing in domestic industry,food industry,medicine industry. It is safe to use without spark and anti-explosive. Specifications Working air pressure: 3.0~4.0Bar Blade: 4" * 2 Shaft size: 16 * 950 mm Motor: Pneumatic Mixing capacity: 50 Gallon /200L Tank Power: 1/2 HP Blade mterial: Stainless steel Axial diameter:15mm Blade diameter:160mm Interface caliber:G1/4 Total height: 118cm Weight:8.5kg Dimension:118.00*20.00*20.00cm 2.W.
Buy It Now
Condition: Used Location: Louisville, United States MAYFRAN CHIP CONVEYOR 1/2 HP.
Buy It Now
$5.50 Shipping Condition: New Location: Trumbull, United States Bridgeport Milling Head Repair, Inc. "The Bridgeport Experts".
Buy It Now
$7.75 Shipping Condition: New Location: Largo, United States NEED PARTS FOR YOUR BRIDGEPORT?. NEW VARI SPEED TIMING BELT FOR BRIDGEPORT. BRIDGEPORT PN: 1552106.
Buy It Now
Condition: Used Location: Muscle Shoals, United States Looks like the previous owner did a decent job on the repair. The repair can be seen in the last picture. Also, the Cat. No is correct for a 1-1/2 HP ... moreby Baldor's Specs. Baldor doesn't make a 1/2 HP Belt Grinder that we can find.
Buy It Now
$99.99 Shipping Condition: New Location: 龙岗区, China 3KW 4HP Spindle Motor Power Head Belt Spindle Milling 5 Bearings Cutting BT40 US 3. Advantage (1) Higher precision, better stability and smoother operation. ... more(2)Double waterproof design structure, isolating cutting fluid and dust in production and processing, ensuring the good condition of the spindle head in actual work.( Waterproof function is only available on some models,Please choose the right model according to your needs) (3) The main shaft housing is cast in high-tough cast iron. After manual and natural double aging treatment, it is wear-resistant and not easily deformed. 4. Benefits for you (1) Using better manufacturing technology, bring you a higher quality and more perfect experience. (2) Excellent service, a variety of models to meet your needs.
Buy It Now
Free Shipping Condition: New Location: Walton, United States To Ensure This Impeller Is Suitable For Your Engine, Please Forward Your Serial Number For To Cross Reference. Please Feel Free To Ask Us Any Questions ... more1. This Impeller replace Johnson/Evinrude/OMC outboard motors 387361, 763735,Sierra 18-3090 . 2. Impeller Dimentions: No. Blades: 6 Depth /Height/width :17.78mm Outer /External impeller overall Diameter: 38.86mm Internal shaft insert /Hub Diameter : 10.97mm Net Weight: 30g Material: Impeller(CR), Shaft Sleeve (Brass) 3. Applications(Johnson/Evinrude (OMC/BRP) Outboard models): 2hp (1985-90), 4hp (1976-80) - (90 degree gearcase), 6hp (1979), 18-3090.
Buy It Now
Free Shipping Condition: New Location: Monroe, United States The 425 is also available in a multitude of pressure ranges and for all standard industry gases. Equipped with a tamper-proof, self-reseating internal ... moresafety valve. 2.5" Brass dual scale easy-to-read gauges.
Buy It Now
Free Shipping Condition: New Location: Grand Forks, United States LOCAL PICK UP OR DELIVERY AVAILABLE! See Details Below! Up for Purchase Shop Fox W1666 2 HP 1550 CFM Dust Collector Features& Specifications: Ø ... moreStatic Pressure: 12.3 Inch Ø Air Suction Capacity: Approximately1.550 CFM Ø Standard Bag Filtration: 30 micron Ø Motor Amplifier Draw: 220V to 12A Ø Bag Volume: 5.4 Cubic-Feet ITEM IS NEW WITH DEFECTS! PIECES OF ITEMS DAMAGED(SMASHED& DENTED) DURING SHIPMENT! SEE PICTURES FOR DETAIL* FREE LOCAL PICK-UP AVAILABLE! LOCAL DELIVERY IS AVAILABLE FOR THIS ITEM FOR A $50.00 FEE* Visit my store*
Buy It Now
$58.56 Shipping Condition: Seller refurbished Location: New Port Richey, United States
Buy It Now
$100.61 Shipping Condition: New Location: Temecula, United States New Surplus: Bale Engineered (BE) 3HP Dust Collector with 2 Micron Dust Filtration. This is a high quality, Industrial Dust Collector used for multiple ... moreindustrial applications. Plug: 8' Cord with 6-15P Plug.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Application It is widely used in aerospace manufacturing, shipbuilding, home appliances, coating, the food industry, medical treatment, paint, ink, printing ... moreand dyeing, cosmetics, synthetic leather, leather, tires, ceramics, ball manufacturing, and other industries. It is suitable for paint stirring in the spraying process, and also for stirring various coatings. Specification Color: Silver Blade Material: Stainless Steel Working Pressure: 1-3kg/ 2.20-6.61lb Power: 1/2HP Speed: 50-2000 rpm Stirring Capacity: 190L/50gal Blade Diameter: 15cm/ 5.
Buy It Now
Free Shipping Condition: New Location: Maspeth, United States Add a cyclone to your dust collector. Stop 99% of dust before it clogs the filter. Prevents filter clogging and suction loss. High Efficiency air ramp ... morePatented design. Fit most 1-2 HP 650-1500CFM dust collector.
Buy It Now
Condition: Used Location: Pomona, United States Length of Ram Stroke: 0 – 7″. Head Swivel: 360 Deg. Vertical Travel: 3″. Horizontal Travel: 9-1/2″. Vertical Travel: 5″. Depth of Table: 5-3/8″. Table ... moreSize: 6-5/16″ x 5″. Wheeler Machinery Sales, Inc.
Buy It Now
$11.00 Shipping Condition: New Location: Milford, United States Bridgeport PN 1118-2120, 2J-668, 2J668, 118-2120, 1182120, 11182120. This Belt Fits All 2J Vari Speed Heads With Either A 1-1/2 HP or 2 HP Motor. Belt ... moreMade To The Exact Specifications of Bridgeport's 2J Drive Belt.
Buy It Now
Condition: Used Location: Lenapah, United States Wired 575 Volt ONLY. All products are as is. No Stationary Pulley or Slider Pulley.
Buy It Now
$5.50 Shipping Condition: New Location: Trumbull, United States Clockspring Assembly for Bridgeport 4J Series II Head. Made by Hardinge part number BP 12171009. New! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14489f1a40b-0xef-
Buy It Now
Condition: Used Location: Lenapah, United States Machines all work two of the motors have been switched out from the factory motor. Not all of the down handles are on the machine to lower the quill. ... moreAll products are as is.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Eyes on VEVOR dust collector, keep your workspace clean and fresh. Why Choose VEVOR?. Woodworking Dust Collector. 1059 CFM & Cyclone System &13.2 Gal ... moreCollection Drum. Because of the cyclone system, heavy debris is pulled down to the collection drum before the debris stream reaches the filter, achieving a better chip separation.
Buy It Now
Free Shipping Condition: Used Location: Cumberland, United States This industrial sewing machine comes equipped with a powerful 1/2 HP clutch motor that operates at 110V and 1725 RPM, making it perfect for heavy-duty ... moresewing tasks. The machine is designed with a single head and features a mechanical control system, providing precise control over the sewing process.Made in Japan, this machine is of high quality and is suitable for use in various industrial settings. Whether you're working with textiles or apparel, this sewing machine is sure to provide reliable performance for all your sewing needs.Tested and works great!
Buy It Now
Condition: Used Location: Watertown, United States Bridgeport Series I Vertical Milling Machine- 2HP. 42" Table, Variable Speed Specifications Manufacturer: Bridgeport Model: Series I Serial: 12/BR ... more218609 Table Size: 42" x 9" Range- Longitudinal(X) 26-1/2" Cross(Y) 12" Vertical. Knee: 16" Quill: 5" Ram Travel: 12" HP: 2 Voltage: 230-460/440-460 Phase: 3 HZ: 50/60 Approx. Weight: 2.400 lbs. Dimensions: 50" x 46" x 82" MillMate Acu-Rite Digital Read out- Vise Included- Table Traverse Crank Handle is loose. Missing servo power feed handle. Vertical knee traverse crank, and Quill Feed Hand Lever. We ship anywhere your freight handler or carrier. FOB Spartanburg, SC 29303 For more information contact Josh Miller at(843) 858-1872 or at Terms and Conditions SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: RBI ESS accepts Bank Wire(Transfer) PAYPAL, Certified Checks, Credit Card(3%Processing Fee) and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships worldwide and uses all common carriers including USPS. DHL, FEDEX, UPS and truck freight. When requested RBI ESS will combine multiple orders to reduce shipping costs, if possible. LOCAL PICKUPS REQUIRE PAYMENT OF LOCAL SALES TAX, UNLESS EXEMPTION IS PROVIDED. Contact us@ 864 444-4348 or email ricky.ward@essindustrial.com for special shipping instructions or for scheduling a pick up at our location in Spartanburg SC. USA. RETURN POLICY: Our goal at RBI ESS is to please our customers. We do our best to describe each item accurately. If an item arrives damaged or incorrectly described. We will work with you to resolve the situation. Any item damaged or incorrectly described that is returned must be returned within 7 days of receipt or no refund will be granted. Any refund given will be less all shipping costs. If there is a problem, please call us@ 864 641-7458 or email angela.egnor@essindustrial.com. Mac DB: 3888-1371-JM
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States T32459 2" x 42" Knife-Making Belt Sander/Grinder. T32459 Knife-Making Belt Sander/Grinder. The complete and easy-to-read manual makes it easier to assemble ... moreand maintain your machine. The gas strut also allows for quick and easy belt changes.
Buy It Now
$6.75 Shipping Condition: New Location: Broadview Heights, United States OEM 2550004. WILL NOT FIT THE 1.5 OR STEP PULLEY MACHINES. THIS IS THE ENTIRE (3) PIECE ASSEMBLY.
Buy It Now
$300.00 Shipping Condition: Used Location: Bristol, United States Shipping is just an estimate, so contact me first and quote if interested. It will be shipped on a pallet by truck via freight. Local pickup is always ... morewelcomed. Check out my other listings as well. Thank you for looking
Buy It Now
$12.00 Shipping Condition: Used Location: Bristol, United States good for any j head 1 hp 2 hp bridgeports
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing results. ... moreAre you still struggling to stir the raw material manually?.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
Buy It Now
Free Shipping Condition: New Location: Mckinney, United States OIL FREE Aeration Air COMPRESSOR & can also be used as a VACUUM PUMP These compressors are perfect for a variety of uses and are ideal for vacuum and ... morecompressor functions - veneer presses, pond aeration, vacuum forming, re-vac units, dental offices, and many many more.
Buy It Now
$37.58 Shipping Condition: Used Location: Salem, United States Delta 1 1/2 hp, 3450 rpm motor, 115/230 vac, 5/8" shaft. CCW rotation facing the shaft. Good condition, need cleaned up, runs smoothly.
Buy It Now
$9.65 Shipping Condition: New Location: Eastlake, United States For 2J Bridgeport Head. NEED PARTS FOR YOUR BRIDGEPORT?. KEVLAR VARIABLE SPEED DRIVE BELT FOR VARIABLE SPEED BRIDGEPORT MILLING HEAD. Bridgeport PN: 1182120. ... moreFor a 1-1/2 or a 2 HP head. Just let us send you updated invoice.
Buy It Now
$19.24 Shipping Condition: For parts or not working Location: Jacksonville, United States Dunmore Series 24 Automatic Drill Unit, 1/2 Hp motor, unknown working condition 3 phase As is
Buy It Now
$6.75 Shipping Condition: New Location: Broadview Heights, United States REPAIR KIT FOR THE VARIABLE SPEED 2 HP BRIDGEPORT MILL. NEED A PART FOR YOUR BRIDGEPORT?. 1 SNAP RING FOR MOTOR DISC. 2 INSERTS AND KEY FOR MOTOR DISC. ... moreAN INEXPENSIVE WAY TO MAINTAIN YOUR MACHINE. 2 INSERTS AND KEY FOR SPINDLE DISC.
Buy It Now
$15.45 Shipping Condition: New Location: Broadview Heights, United States DRIVE BELT (2 HP) - OEM 1182120. TIMING BELT (2 HP) - OEM 1552106. (this is the ORIGINAL Bridgeport drive belt). DON'T FORGET TO LOOK AT OUR OTHER QUALITY ... moreBRIDGEPORT PRODUCTS INCLUDING PULLEYS, REPAIR KITS AND WAY WIPERS.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in.
Buy It Now
Free Shipping Condition: New Location: Elgin, United States This Sandvik CoroCut SL70 Indexable Profiling Head is a top-quality tool for your machining needs. It features a modular connection with SL70 and insert ... moretype N123H2-GM, making it highly compatible with a range of machines.
Buy It Now
$17.46 Shipping Condition: New Location: Fort Wayne, United States This is a new Timing Belt for your Bridgeport Series I milling machine with a 1-1/2hp motor on a Variable Speed head or a 1hp Step Pulley Head.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: 1. For reaming or hole repair, because of its small amount of cutting precision machining requirements are usually higher than the drill bit. ... more2. High-speed steel manufacturing cutting tools,its high hardness, high wear resistance and adequate toughness. 3. Processed surface of iron, steel, plastic, wood, copper, aluminum and other metal materials. 4. Widely used for bore machining, installed in drilling machine, milling machine, etc. Specification: Type: Straight Reamer Material: HSS Resolution: H7 Shank: Straight Size: 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10 mm 11mm 12mm Package Included: 10PCS Straight Shank Chucking Reamers .
Buy It Now
Free Shipping Condition: New Location: Nixa, United States Untitled Document Free. Fast Shipping Every Business Day! Bridgeport 2hp. Variable Speed Motor Series I Mill Instructions and Parts Manual Click for Our ... moreComplete Catalog Manual Description: Number of Pages: 56 This is a reproduction. Not a photocopy, of an original Bridgeport 2hp. Variable Speed Motor Series I Installation, Operation, and Maintenance Manual. This manual covers the full milling machine. It includes good information on installing and adjusting all of the major parts. It also covers proper lubrication instructions. It includes the parts for the 2hp Variable Speed Motor as well as operating instructions, installation instructions, and how to change the variable speed belt. The manual covers four other heads and attachments, which are listed in the contents below. Machine Specifications.2 Milling Head Specifications.3 Uncrating.4 Shortages.4 Cleaning.4 Lifting Machine.5 Placing on Solid Foundation.6 Leveling Machine.6 Handles.6 Connecting Power Supply.6 Alignment of Head.8 Lubrication.8 Adjustment of Table Gib.10 Adjustment of Saddle and Knee Gibs.10 Clamping Table. Saddle and Knee.11 Removing Table.12 Removing Saddle.12 Mounting Vari-Drive Attachment to Ram Adapter.14 Lubrication.14 Operating Instructions.14
Buy It Now
Free Shipping Condition: New Location: Chino, United States Used in a variety of special machinery. 6000 rpm milling waterproof. Towbar spindle hole: 12mm (not included). 1X spindle unit. Your satis faction is ... moreour ultimate goal. Speed: 6000rpm. Power: 1.5kw 2HP.
Buy It Now
Condition: Used Location: Lenapah, United States All products are as is.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description: Deposited chemical composition: (wt%): C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 ... more/ Cu: 0.11 Product Specification: ER70S-6 Mild Steel MIG Welding Wire AWS Classification: ER70S-6. Wire diameter: 0.023" (0.6mm). Weight of welding wire: 20-lb Spool Diameter: 8" inch Center Hole (Hub) Diameter: 2" inch Wide Spool: 2" inch Package Include: 2 Rolls ER70S-6 .023" (0.6 mm) 20 LbsMild Steel MIG Welding Wire .
Buy It Now
Condition: Used Location: Millwood, United States Ships from Michigan Automatic Overloads• Sleeve Bearings• Split Phase• 1.0 Service Factor Special Shaft• Class B Insulation• 48Y Frame One Year Warranty ... moreMotors have a threaded conduit hole. Short. Slotted shaft for close-coupling the carbonator pump to the motor. Extended hub for direct-mounting. Uses: Liquid transfer pumps. Vending machine pumps, and other hub mounted pump applications. These motors are designed for use on the carbonated beverage and drink dispensers used by restaurants and bars. Coolant pumps for welders are another application where this motor is used. 1/2 hp. 1725 RPM 6.8/3.4 amps. 115/230 volts 50/60 hz. Rotation: Reversible Overall Length = 8.8" Ship Weight 15 lbs. Reference: GE# H684. Dayton 5U258, 3K090, 3K596, 4FG45 This is an aftermarket replacement manufactured by AO Smith/Century One Year Manufacture Warranty for Manufacturing Defects AO Smith/Century Catalog# CB2054AD Winans Inc DBA: Electric Motor Warehouse. Burton, Michigan 48529 810-744-1240 Monday- Friday 8am to 4:30pm EST If you need additional information regarding this product e-mail us and we will be glad to answer your questions. You can also visit our Ebay page to learn more about our company. We accept Visa. Mastercard, Discover and American Express or PayPal. No COD's! Positive feedback is left automatically for the buyer by the system as soon as you. The buyer, submits feedback for us.
Buy It Now
Free Shipping Condition: New Location: Columbia, United States WARNING: Cancer and Reproductive Harm.
Buy It Now
Condition: Seller refurbished Location: Zebulon, United States The W7S is a work horse with it's 2 HP Baldor motor. It has a movable wheeled base that can be locked down when in use. I have had this for 4 years and ... morenever did anything with it. I just got done cleaning it up, checking the machine, went through everything including the starter and everything works as it should.
Buy It Now
Condition: For parts or not working Location: Johnstown, United States We don't typically handle this type of item and as such don't know a lot of the technical information regarding this item. All of our parts have been ... moretested and are in working condition unless otherwise stated!
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States 220V 2Hp Variable Speed 2X72" Belt Sander Knife Grinder. Belt Grinder Variable Speed Chasses is designed for professional knives, other cutting tools ... moreand machines makers. 1 set Belt Sander Knife Grinder (190830).
Buy It Now
Condition: Used Location: Minneapolis, United States Acu Rite II (2) Axis DRO. You can watch the video or turn handles for yourself under power in our Savage, MN warehouse. Vise and collets are included. ... moreBridgeport Series I-2HP Variable Speed Vertical Milling Machine.
Buy It Now
$88.40 Shipping Condition: Used Location: Ashby, United States Works great 1/2 Hp Peerless Centrifugal Blower. Condition is Used. Shipped with FedEx Ground or FedEx Home Delivery. Some surface rust in spots from long ... morestorage . Very heavy
Buy It Now
$75.00 Shipping Condition: New Location: Maricopa, United States Bung Mount Agitator Mixer 1/2 HP Single Phase Direct Drive. Condition is New. Folding stainless Propeller, with Set Screw. Pump rate is 600 GPM. Fits ... morethrough a Female National Pipe Thread Bung Fitting.
Buy It Now
$4.87 Shipping Condition: Used Location: Moravia, United States Grizzly Shaper Manual, as pictured.
Buy It Now
$140.49 Shipping Condition: New – Open box Location: Oregon, United States The horsepower (HP) is 1/2 and the maximum RPM is 450. Item IBC Mixer. Mixer Style Bung Entering. Maximum Mixing Speed 450 RPM. Maximum Motor Horsepower ... more1/2 hp. Phase Single. My driver will be 100% responsible for the item after it is signed for and released to him/her.
Buy It Now
Free Shipping Condition: New Location: Columbus, United States IMPORTANT: Static Converters do not produce constant 3-phase power; they “jump-start” your 3-phase motor to run on single-phase power. Be sure to read ... moreall information provided. This enables the use of high HP motors where previously not thought possible.
Buy It Now
Condition: Seller refurbished Location: Watertown, United States Remanufactured Bridgeport Milling Machines with 48" Table. 42" Table also available price adjusted accordingly. When you buy from us your buying ... morefrom knowledgeable people with years of experience in the Manufacturing, Engineering& Tool and Die Trades, your dealing with hands on guys that use the machines they sell on a daily basis. Not just a salesman) Make: X-Axis Travel Bed: Model: Y-Axis Travel Bed: MPN: Z-Axis Travel Bed: Type: Highest Spindle Speed(RPM) For more than 60 years. The Bridgeport Series I Standard Mill- the original, all-purpose mill- has been the"real thing" in milling, drilling, and boring for metalworking shops throughout the world. Today, the Series I Standard continues to fulfill the industry's need for an accurate, reliable, and versatile mill. The Series I Standard features an innovative airflow cooling design that uses no external fans to prolong bearing life and prevent expansion from heat build-up. A full range of accessories are available. Including optional chrome-plated ways and gibs to ensure that the machine will last a lifetime. Range Table travel(X-Axis) 36" 914 mm) Saddle Travel(Y-Axis) 12" 305 mm) Quill Travel: 5" 127 mm) Knee Travel(Z-Axis) 16" 406 mm) Ram Travel: 12" 305 mm) Throat Distance(Min. 18.75" 476 mm) Throat Distance(Max. 6.75" 171 mm) WORKTABLE Standard: 42 x 9" 1245 x 299 mm) T Slot center distance: 3@ 2.5" 64 mm) centers T-Slot Size: 0.625" 16 mm) Height Above Floor(Max. 47.25" 1200 mm) Weight of Workpiece(Max. 750 lb(340 kg) Spindle(2J Head) Power Rating 30 min. Duty Cycle: 3 hp(2.2 kW) Power Rating Continuous: 2 hp(1.5 kW) Tooling: R-8 Collets Drilling Capacity Power Quill Feed 3: 3/4" Dia. 19 mm) Manual Drilling Capacity: 3/4" 19 mm) Mild Steel Boring Range: 6" 152 mm) Mild Steel Spindle Diameter: 1.875 in(48 mm) Quill Diameter: 3.375" 86 mm) Speed Range High(Infinitely Variable) 500-4200 rpm Low: 60- 500 rpm Power Quill Feed: 0.0015"rev(0.038 mm) Manual
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications Motor: Pneumatic Mixing capacity: 50 Gallon /200L Tank Power: 1/2 HP Blade mterial: stainless steel Weight: 20lbs Size: 50*8*7 inch Feature ... more304 Stainless Steel Blade, Shaft and Coupler Easy Cleanup Augers High Solids Reduces Mix Time by 50%-80% Decreases Air & Electric Consumption by 50% Unique cut design creates superior dispersing and greater breakdown of agglomerates Item Included: 1 x 50gallonTank Barrel Mixer.
|