|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$39.99 Shipping Condition: Used Location: Tampa, United States VERY GOOD
Buy It Now
Condition: Used Location: Clare, United States Model: DG17. DoAll Drill Press. Condition: Works great but makes a ticking sound while running. Have inspected gears while machine is running and have ... morebeen unable to locate a problem. Also table lock handle is broken.
Buy It Now
Free Shipping Condition: Used Location: Waterford, United States USED, DELTA SPIDER HANDLE. 2 OF THE 3 HANDLES ARE MISSING. THE HANDLE BORES ARE 3/8-24. THE MOUNT BORE IS 1-1/4". NO CRACKS OR REPAIRS.
Buy It Now
$12.50 Shipping Condition: Used Location: Joshua, United States Tested and in good working condition.
Buy It Now
$28.50 Shipping Condition: Used Location: Waterford, United States USED, FRONT PULLEY COVER CASTING FOR THE EARLY 17" DELTA DRILL PRESS. NO CRACKS OR REPAIRS. LOOK AT THE PICTURES.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Rated power: 480W Rated current: 0.55A Table size: 17*21.5cm The spindle is about 110MM away from the drill bit center Drilling diameter: ... more1-10mm Max Spindle travle: 40mm NO-load speed： I: 0-5000r/min II:0-11000r/min Drill capacity: Woods:φ25mm Iron：φ7mm Features: -Suitable for drilling, expanding, and reaming operations on metals and other materials. It can be widely used in single-piece or mass-produced instrument industry, machinery manufacturing and repair parts. -High-power 480W miniature portable bench drill Precision drilling machine motor copper -The motor has increased power, which is to increase the life of the motor.
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States USED, COLUMN HOLDER CASTING FOR THE OLDER DELTA 17" DRILL PRESSES. THE COLUMN BORE IS 3-1/2". LOOK AT THE PICTURES.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Rated power: 480W Rated current: 0.55A Table size: 17*21.5cm The spindle is about 110MM away from the drill bit center Drilling diameter: ... more1-10mm Max Spindle travle: 40mm NO-load speed： I: 0-5000r/min II:0-11000r/min Drill capacity: Woods:φ25mm Iron：φ7mm Features: -Suitable for drilling, expanding, and reaming operations on metals and other materials. It can be widely used in single-piece or mass-produced instrument industry, machinery manufacturing and repair parts. -High-power 480W miniature portable bench drill Precision drilling machine motor copper -The motor has increased power, which is to increase the life of the motor.
Buy It Now
$8.99 Shipping Condition: Used Location: Waterford, United States USED, BEARING FOR THE RAISING ASSEMBLY ON A 17" DRILL PRESS. THE BEARINGS NEED TO BE GREASED.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Rated power: 480W Rated current: 0.55A Table size: 17*21.5cm The spindle is about 110MM away from the drill bit center Drilling diameter: ... more1-10mm Max Spindle travle: 40mm NO-load speed： I: 0-5000r/min II:0-11000r/min Drill capacity: Woods:φ25mm Iron：φ7mm Features: -Suitable for drilling, expanding, and reaming operations on metals and other materials. It can be widely used in single-piece or mass-produced instrument industry, machinery manufacturing and repair parts. -High-power 480W miniature portable bench drill Precision drilling machine motor copper -The motor has increased power, which is to increase the life of the motor.
Buy It Now
$8.65 Shipping Condition: Used Location: Nashville, United States
Buy It Now
Free Shipping Condition: New Location: United States Spindle Travel (in.). Power Tool Features: 360-Degree Swivel,LED Light,Variable Speed. Maximum Speed (RPM): 2200 RPM. Bench & Stationary Tool Type: Drill ... morePress. Swing Distance (In.). Chuck Capacity (in.).
Buy It Now
Condition: Used Location: Bridgeport, United States Delta Floor Type Drill Press. Model 17 430. 1/2" Jacobs drill chuck. We can load the drill onto your truck or trailer at no cost. Safety chip shield with ... moresafety shut-off micro switch. 17" throat. Table swivels and tilts.
Buy It Now
Free Shipping Condition: New Location: Murfreesboro, United States The handle is made from durable plastic with steel inserts which prevents the handle from being fragile such as the old cast iron versions which tend ... moreto break easily. Compatible with the following Delta drill press models.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Our magnetic drilling rig uses high-quality motors with a power of up to 1400W. The magnetic force is 17000N. After being energized, the electromagnet ... moreof the magnetic drill base generates a magnetic field that can firmly adhere to the surface of the work piece, achieving drilling or threading of steel plates.
Buy It Now
$5.00 Shipping Condition: New Location: Chino, United States Specifications: Rated power: 480W Rated current: 0.55A Table size: 17*21.5cm The spindle is about 110MM away from the drill bit center Drilling diameter: ... more1-10mm Max Spindle travle: 40mm NO-load speed： I: 0-5000r/min II:0-11000r/min Drill capacity: Woods:φ25mm Iron：φ7mm Features: -Suitable for drilling, expanding, and reaming operations on metals and other materials. It can be widely used in single-piece or mass-produced instrument industry, machinery manufacturing and repair parts. -High-power 480W miniature portable bench drill Precision drilling machine motor copper -The motor has increased power, which is to increase the life of the motor.
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States USED, DELTA SPIDER HANDLE. THE BORE IS 1-1/4". THERE IS A HOLE DRILLED IN ONE HANDLE. THERE ARE SCUFFS AND SCRATCHES FROM USE.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Packaged included: 1 x Electric Bench Drill Press Stand Specifications: Rated power: 480W Rated current: 0.55A Table size: 17*21.5cm The spindle is about ... more110MM away from the drill bit center Drilling diameter: 1-10mm Max Spindle travle: 40mm NO-load speed： I: 0-5000r/min II:0-11000r/min Drill capacity: Woods:φ25mm Iron：φ7mm Features: -Suitable for drilling, expanding, and reaming operations on metals and other materials. It can be widely used in single-piece or mass-produced instrument industry, machinery manufacturing and repair parts. -High-power 480W miniature portable bench drill Precision drilling machine motor copper -The motor has increased power, which is to increase the life of the motor. -480 watt motor construction adopts imported bearings, high temperature and full copp.
Buy It Now
Condition: Used Location: Coffeyville, United States 22" THROAT. 50CY FL AMP 7.38/3.69, FL SPEED 945. 60 CY FL AMP 6.36/3.18, FL SPEED 1140. BUFFALO DRILL PRESS. GENERAL ELECTRIC MOTOR; MODEL 5K225E17. MODEL ... moreNO. 22. SERVICE FACTOR 1.15 AT RATED VOLTS, 60 CYCLES.
Buy It Now
Condition: Used Location: Millersburg, United States Max height 18". This unit has a power feed. The belt is wore. May need new belt for better operation. Works as it is. Lift Tables. Country of Manufacture ... moreUSA. Motor is 1 hp.
Buy It Now
$88.05 Shipping Condition: Used Location: Youngstown, United States SEE PHOTOS A NEW PIECE OF METAL WAS ATTACHED TO TOP SURFACE. B4
Buy It Now
$9.00 Shipping Condition: Used Location: Lititz, United States Delta Walker Turner 17" Drill Press Pinion Early 60's Num. I will attempt to have each item as clean as possible for sale. The cost is what it is. Wait ... morefor an invoice to be sent.
Buy It Now
$28.50 Shipping Condition: Used Location: Waterford, United States USED, MOTOR MOUNT /POWERFEED MOUNT PLATE FOR THE OLDER DELTA MILWAUKEE 17" DRILL PRESS. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES.
Buy It Now
Condition: Used Location: Coffeyville, United States The JET JDP-17MF Floor Drill Press is a true woodworker's drill press. With 16 speeds. It lets you choose the best speed for the job. It comes equipped ... morewith a quick release crank operated worktable, worklight, X-pattern mounting grooves, depth stop, and adjustable tension spindle return spring which is ideal for repetitive drilling of the same depth. 16 speeds lets you choose the best speed for the job, Quick release crank operated worktable height adjustment rotates + or- 45° for versatility, Hinged metal belt and pulley cover provides easy access to the quick adjustment motor mount to allow rapid spindle speed changes, X" pattern mounting grooves in table allow mounting a fence when table is in reverse position, Depth stop displays inch/mm and has a quick set bolt for fast. Accurate adjustments, Spindle has high-quality ball bearing construction for long life, Adjustable tension spindle return spring is ideal for repetitive drilling of the same depth, Built-in worklight(bulb not included) provides additional visibility of your work, Part Number, 354169 Swing, 16½" Spindle Travel, 4 3/8" Spindle Distance to Table(max) 29 1/8" Spindle Distance to Base, 49" Spindle Speed, 200- 3630 RPM Spindle Taper, MT-2 Drilling Capacity, 5/8" Chuck Size, 5/8" Column Diameter, 3 1/8" Table Size, 13 3/4" Base Size, 11 1/8 x 19 5/8" Motor Power, ¾ HP, Motor Voltage, 115/ 230 V Prewired Voltage, 115 V, Motor Current, 9/ 4.5 A Motor Phase, 1 Ph, Spindle Speeds, 16 Family Description, 16-1/2" FLOOR MOUNT DRILL PRESSES Model Number, JDP-17MF Brand, Jet Height, 12.8 inch, Width, 23.5 inch, Length, 54.5 inch, Net Weight, 209 pound,
Buy It Now
$19.89 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
Condition: Used Location: Coffeyville, United States HAMILTON VARIMATIC DRILL PRESS. ALBRECHT CHUCK SIZE - 1/8". TABLE BORE SIZE - 1/4". CYCLE - 60. TABLE SIZE - 7-1/4" X 8-1/8". YOU WILL RECEIVE WHAT IS ... morePICTURED, NOTHING LESS NOTHING MORE.
Buy It Now
Condition: Used Location: Middlebury, United States Prefer to pick it up yourself?. Country of Manufacture: N/A. Size: Length: 24 in. Width: 17 in. Height: 11 in. Will there be a dock or forklift. Unless ... moreotherwise specifically agreed to in writing by.
Buy It Now
$73.37 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
$3.97 Shipping Condition: Used Location: Addison, United States Operator Maintenance Manual. Rockwell-Delta Walker-Turner 17" Drill Press. Printed Manual.
Buy It Now
Free Shipping Condition: New Location: United States Cantex 5133382 Weatherproof Box,2Gang,1 In Hub,Pvc. Master Magnetics 07013 Mag. Strip,25 Ft. L,1/2 In W,Pk6. Tough Guy 402V92 Burnishing Pad,Tan,Size ... more21",Round,Pk5. Lumapro 32Pe50 Lumapro 9.4 W, Led Magnifier Light.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： 3" Cross Slide Vise (Black) 3" jaw width. 3" jaw opening. 1" jaw depth. Height: 5" Base Dimensions: 6-1/2" L x 4" W Weight: 11 lbs. 4" ... morelongitudinal and 4.5" cross travel. 3" Cross Slide Vise (Blue) 2-3/8" throat opening, 4" longitudinal and 4.5" cross travel, jaw width: 3" - Maximum Vise and cross slide have adjustable shims Cross slides have removable adjusting crank handles.
Buy It Now
Free Shipping Condition: New Location: United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
$82.25 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
$73.37 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
Condition: Used Location: Waukesha, United States DELTA 17-950L 16.5-Inch TwinLaser Crosshair Drill Press Excellent Condition- Works Perfectly, Gently Used- Home Hobby Only, LOCAL PICK-UP ONLY, INCLUDES ... moreSTAND and LIGHT,
Buy It Now
Free Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
$19.89 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
$19.89 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
Free Shipping Condition: New Location: Grand Forks, United States With the extra horsepower aluminum finned motor, the Morse Taper #3 spindle for the larger direct mount bits and the closely spaced spindle shaft bearings ... moreyou have one of the most accurate drill presses in its class.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： 3" Cross Slide Vise (Black) 3" jaw width. 3" jaw opening. 1" jaw depth. Height: 5" Base Dimensions: 6-1/2" L x 4" W Weight: 11 lbs. 4" ... morelongitudinal and 4.5" cross travel. 3" Cross Slide Vise (Blue) 2-3/8" throat opening, 4" longitudinal and 4.5" cross travel, jaw width: 3" - Maximum Vise and cross slide have adjustable shims Cross slides have removable adjusting crank handles.
Buy It Now
$19.89 Shipping Condition: Used Location: Lockport, United States New owner will need to push bearings on .
Buy It Now
Condition: Used Location: Orange City, United States Spindle tapers.... Burgmaster. Greenway Product Number: 10801. Spindles set up for...
Buy It Now
$19.99 Shipping Condition: New – Open box Location: Lincoln, United States Take your drill press to the next level with the WEN Drill Press Table. Onboard rulers maximize accuracy for precise and even cuts while the adjustable ... more23-5/8 in. fence and stop block allow you to perfectly line up any project.
Buy It Now
$20.00 Shipping Condition: New Location: Chino, United States DESCRIPTION: Speed: 1000-3000rpm Bench drill size: 10*13*22cm Motor model: 795 pure copper motor Synchronous wheel 1:2 speed change Drilling stroke: 40mm ... moreChuck specification: B12 (1.5-10mm) Voltage: 110-240V Plug: US plug Scope of application:cutting,grinding,polishing,home Spindle diameter:10 (mm) Condition: New PACKING LIST: 1*mini bench drill 1*96W Power adapter.
Buy It Now
Free Shipping Condition: Open box Location: Marietta, United States
Buy It Now
$10.50 Shipping Condition: New – Open box Location: Kewanee, United States Shop made from heavy wall 1/2" thick steel. The collar is about 1.625 wide 1/2 thick wall and fits nicely on 3" columns. 3/8-16 bolt for clamping in place. ... moreWorks great I have one on my 17" Clausing. Shipping will be $10.50 in the USA.
Buy It Now
$27.17 Shipping Condition: Used Location: Lockport, United States Preowned in good condition. You will receive the items you see here. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14b3e277598-0x10a-
Buy It Now
$16.88 Shipping Condition: Used Location: Fort Worth, United States Parting out a Powermatic 1150 Drill Press – Variable Speed; 1150 VS, 1150VS. Floor standing model with a hand crank lift production table, 3PH motor, ... moreand #2MT spindle. I salvaged the production table, crank lift assembly, and 2MT spindle for myself.
Buy It Now
$7.44 Shipping Condition: Used Location: Fort Worth, United States Parting out a Powermatic 1150 Drill Press – Variable Speed; 1150 VS, 1150VS. Floor standing model with a hand crank lift production table, 3PH motor, ... moreand #2MT spindle. I salvaged the production table, crank lift assembly, and 2MT spindle for myself.
Buy It Now
$14.09 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
Free Shipping Condition: New Location: Miami, United States ebay template T& T Trading Group LLC, Shop Fox W1680 1-Horsepower 17-Inch Floor Model Drill Press. Retails for $594(SHIPS BY FREIGHT PLEASE SEE TERMS) ... moreITEM: Shop Fox W1680 1-Horsepower 17-Inch Floor Model Drill Press CONDITION: Item is in used condition in open retail package. THIS ITEM SHIPS BY FREIGHT PLEASE SEE TERMS BELOW. Unique swiveling base Gas spring return Double support columns Adjustable depth stop rod Micro adjustable fence Manufacturer: Shop Fox, Model: W1680, 1-Horsepower 17-Inch Floor Model Drill Press, Our Goal is 100 Percent customer satisfaction. We love repeat customers. If for any reason you are not completely satisfied with your purchase please contact us asap and we will make it right for you. We leave positive feedback as soon as your item is paid for and we would appreciate 5 star positive feedback once you get your item and inspect it. If you are thinking of leaving anything less then positive feedback and 5 stars please contact and give us a chance to resolve the issue for you. We DO NOT ship internationally. This includes shipping through freight forwarding. This also includes Guam. Puerto Rico, Alaska, Hawaii, US Protectorates, APO, FPO and P.O. Box. Most of the items we sell are not met to be shipped overseas because of their delicate nature Please do not ask us to ship overseas or if we see the item is going to a freight forwarder we will cancel the order NO EXCEPTIONS To help enforce this policy. You will also need a US paypal account to check out. Paypal will block any payment from a non us account holder Items must be paid for or picked up within 30 days of the sale date. If items are present after 30 days from sale date. They will be re-listed. SEE POLICY BELOW IF YOU ARE HAVING AN ITEM SHIPPED BY FREIGHT. Freight items are usually items over 150lbs FREQUENTLY ASKED QUESTIONS RETURN POLICY Q: What Is Your Return Policy? A: We offer a 14 day return on all defective items. If there is an issue with your order. Just contact us- we'll either send you a replacement or issue a
Buy It Now
Condition: Used Location: Coffeyville, United States SWING- 14". DRILLING CAPACITY: 1/2". FLOOR DRILL PRESS. SPINDLE TRAVEL: 3-3/8". SPINDLE DISTANCE TO BASE: 24-1/2". BASE SIZE: 10-5/8" X 14". SPINDLE SPEED: ... more5. SPINDLE DISTANCE TO TABLE: 17-1/2".
Buy It Now
$9.65 Shipping Condition: Used Location: Fort Worth, United States Parting out a Powermatic 1150 Drill Press – Variable Speed; 1150 VS, 1150VS. Floor standing model with a hand crank lift production table, 3PH motor, ... moreand #2MT spindle. I salvaged the production table, crank lift assembly, and 2MT spindle for myself.
Buy It Now
$27.17 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
$6.13 Shipping Condition: Used Location: Fort Worth, United States Parting out a Powermatic 1150 Drill Press – Variable Speed; 1150 VS, 1150VS. Floor standing model with a hand crank lift production table, 3PH motor, ... moreand #2MT spindle. I salvaged the production table, crank lift assembly, and 2MT spindle for myself.
Buy It Now
$6.61 Shipping Condition: Used Location: Fort Worth, United States Parting out a Powermatic 1150 Drill Press – Variable Speed; 1150 VS, 1150VS. Floor standing model with a hand crank lift production table, 3PH motor, ... moreand #2MT spindle. I salvaged the production table, crank lift assembly, and 2MT spindle for myself.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States New Delta Rockwell 17" Drill Press Spindle Load Spring Washer SP-7352.
Buy It Now
$6.13 Shipping Condition: Used Location: Fort Worth, United States Parting out a Powermatic 1150 Drill Press – Variable Speed; 1150 VS, 1150VS. Floor standing model with a hand crank lift production table, 3PH motor, ... moreand #2MT spindle. I salvaged the production table, crank lift assembly, and 2MT spindle for myself.
Buy It Now
Free Shipping Condition: Used Location: San Ramon, United States Delta Rockwell 17" Drill Press Hood Pulley Cover. In nice shape as shown. Free shipping to the lower 48 States only via UPS!!! No P.O. Boxes!! Thanks, ... moreSteve
Buy It Now
Free Shipping Condition: New Location: Murfreesboro, United States The handle is made from durable plastic with steel inserts which prevents the handle from being fragile such as the old cast iron versions which tend ... moreto break easily. The part number for the handle is any of the following:10601009A1, 10601002 & 11501003 and compatible with the following JET drill press models.
|
|
|
|
DELTA 17 FLOOR TYPE DRILL PRESS 22183
in titles& description Name: DELTA 17 FLOOR TYPE DRILL PRESS, Ticket# 22183, Model: 127-741, Manufacturer: DELTA, Item located at: Hanover. MD, Condition: Used, Terms& Condition: As is where i, Description: 8 1/2" THROAT. 220/440 V, 1 HP | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e03620927-0xfa-
|
|
|
Rockwell 17-600 Vari-Speed Floor Standing Drill Press 1HP/230-460VAC/3Ph
The Auction Store Item Description: This is a Rockwell model 17-600 Vari-Speed floor standing drill press. It has a 1HP/3Phase/230-460VAC Rockwell electric motor. It is assumed to be wired for 230VAC. This drill press was removed from service and placed in storage pending auction sale. Additional Details: Overall Dimensions: 21"W x 34"D x 68"H Electrical Input Required: 230-460VAC/3Phase Motor: 1HP Rockwell 86-044 Variable speed model. SN: 1809997 Condition: This item could not be tested to confirm operating status. It was hard wired when in service. It is assumed to be restoration worthy. But must be listed as"non operational or for parts only" Service& parts are assumed to be necessary in order to return this drillpress to full operating condition. Rust is present on this item. Please bid accordingly. Pickup ... moreLogistics: Pickups for this item and others listed for this client will be on Wednesday. April 24th from 9:00am to 2:30pm by appointment. Winning bidders will be given pickup information to the location once payment has been made and have confirmed a time that they would like to pick up their item. This item is located in a warehouse at a district elementary school site. And all activity at this site will be monitored. On site assistance. Loading docks and forklifts, may not be available at this location. Winning bidder will be responsible for providing any and all equipment. Tools, appropriately sized vehicle, and personnel necessary to safely load and remove this item. In some situations. At the sole discretion of our clients, a buyer may be denied access to their item if they are unprepared to remove the item safely from its location. Prior to any pickup appointment. We are happy to discuss the arrangements that should be made by the winning bidder in order to avoid any inconvenience at pickup. Please contact us before bidding if you have any questions or concerns. Policies Notice To Winning Bidder: The Auction Store will send you an invoice within 24 hours of the end of auct
|
|
|
ROCKWELL DELTA 16.5" 17-965 DRILL PRESS 3/4HP 115/230V 1720RPM 16-1/2"
BT# 11727 B06A2-075.3Y You are looking for: ROCKWELL DELTA 16.5" 17-965 DRILL PRESS 3/4HP 115/230V 1720RPM 16-1/2" USED ITEM. FULLY TESTED! IN GOOD CONDITIONS. 15 DAYS WARRANTY! Manufactured by: ROCKWELL. DELTA MACHINARY. Additional info: DRILL PRESS 16.5 INCH. Model: 17-965 Serial No. 016741W2061 Power: 3/4 HP Voltage: 115/230 V Amp: 10/5 PH: 1 Hz: 60 RPM: 1720 Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e0f713684-0xfc-
|
|
|
Horizontal Industrial 17-1/2" Travel drill press 2800 RPM 220V 3/8" Chuck GUAR!
Horizontal Industrial 17-1/2" Travel drill press 2800 RPM. 220V/380V, 3/8" Chuck
|
|
|
17" DELTA ROCKWELL 17-600 BENCH TABLE MOUNT 6-SPEED 3PH DRILL PRESS 1HP 3PH 1140
17" DELTA ROCKWELL 17-600 BENCH TABLE MOUNT 6-SPEED 3PH DRILL PRESS 1HP 3PH 1140. DELTA ROCKWELL#17-600 17" DRILL PRESS BENCH/TABLE MOUNTED USA Made This listing is for 1 used drill press head and column assembly that appears to be in good general overall condition with some normal cosmetic wear. As seen. Rockwell motor is 1HP, 3PH, 230/460V, 60Hz, 3.8/1.9A, 1140RPM. Variable speed: six spindle speeds. Exact speeds are unknown and have not been confirmed. But similar Rockwell models with identical motor RPM(1140RPM) like#15-665, have the following speeds- 3635, 2575, 1355, 725, 395, 280. Includes motor starter and 3-wire lead. Drill head is adjustable 6-1/2" vertically. Drill chuck and the spindle pull handles are NOT included. This machine has a 17" swing. Entire drill press stands about 39" tall overall. This can ... morebe bench or table mounted. We had purchased 3 drill heads in slightly different styles and specifications as this was part of a gang drill set up. Although there are no obvious signs of any known or potential problems that we are aware of. We do not have the means to test it properly, nor do we know anything about its previous history as this was purchased at auction in a large bulk lot form, and so it must be sold as is. Inspections are always welcome and recommended on all used equipment during our business hours with some advance notice. Don't miss your chance to own this professional industrial piece of equipment now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. Due to size and shipping cost. It is expensive and impractical to ship, so we would prefer a local pickup here in Rhode Island. Local sales tax must be charged on local pickups. Inspections are welcome and always recommended before purchasing during normal business hours with advance notice, as this is sold as is. This can also be shipped if the buyer chooses and makes all the necessary arrangemen
|
|
|
DELTA 17-900 16.5" FLOOR DRILL PRESS INDUSTRIAL WOODWORKING TOOLS
DELTA 16.5" DRILL PRESS CAT. NO. 17-900 BELOW IS SOME INFO I FOUND ONLINE ABOUT THIS MODEL# AND IS FOR INFORMATIONAL PURPOSES ONLY. Capacity: 16 1/2' x 5/8" Drilling Cap. 5/8" Swing: 16 1/2" Table Size Tilting: 12" x 12" Spindle Speeds(12) 250-3.000 Rpm Spindle Quill Taper: 2 MT Spindle Quill Travel: 3 3/8" Column Diameter: 3" UNIT WAS PULLED FROM A WORKING ENVIROMENT AND POWERS UP FINE. BUT ALL CAPABILITIES HAVE NOT BEEN FULLY TESTED, SO AS ALL OF OUR AUCTIONS ITEM IS BEING SOLD AS IS AND ALL SALES ARE FINAL. THE PLASTIC LID ON THE TOP PIECE IS CRACKED ON CORNER AS SHOWN IN PICS. BUT STILL CLOSES. FORKLIFT IS AVAILABLE FOR LOADOUT. FREIGHT CAN BE ARRANGED BY BUYER OR WE CAN ARRANGE AND ADD TO INVOICE AND LOCAL PICK UP IS AVAILABLE. JUST GOT A TRUCK LOAD OF DELTA WOODWORKING EQUIPMENT SO BE SURE ... moreTO CHECK OUT OUR OTHER ITEMS. Check out my other items!
|
|
|
DELTA ROCKWELL 17 INCH DRILL PRESS TABLE RAISING UNIT
Up for Sale is a Delta Rockwell 17 inch drill press table raising unit. Item is missing crank up down handle. The rack has been modified and is not completely original(see pictures) Looks like modification is better than original loop piece that was replaced. Gears are all good and usable. The hardware is all there one screw looks like a replacement and not original also. DP 660 Casting number. Fits 3 1/2" column. This item is in good usable condition. These parts fit the following drill presses and most likely a few others. 17" 1370, 17-205, 17-206, 17-207, 17-208, 17-210, 17-211, 17-212, 17-213. This is the old style DP-600 Z head casting. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part ... moretime seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a fina
|
|
|
Refurbished Vintage 1940 Delta Rockwell 17" Drill Press
For sale is a refurbished 1940 Delta 17" drill press. Catalog number 1382 or the later m odel number 17-210. The drill press has a single phase. 3/4 HP Delta Repulsion-Induction motor and is wired to run from a standard 120 volt wall plug. The motor is from 1941 to 1944 and most of the data on the steel motor tag is gone. The drill press has been completely disassembled. Sand blasted, and refinished. All bearings in the motor and drill press have been replaced. The drill press has 0.002" run-out as measured on a bare arbor and the Jacobs 6A chuck has 0.004" run-out as measured on a pin 1.5" down from the chuck. This is the slow speed model with 5 speeds of 385. 600, 935, 1450 and 2240 RPM. The production table has a few hits from drill bits and some thru holes. This is a nice drill press and you won't be disappointed. ... morePS the cart is not included with the drill press.
|
|
|
Delta 17" drill press Thrust bearing
Delta 17" drill press Thrust Bearing
|
|
|
Delta 17-900 16-1/2" 12-Speed Floor Drill Press
Technical Details Part Number 17-900 Item Weight 194 pounds Product Dimensions 25.2 x 12.8 x 66 inches If your projects require you to drill with big bits or if you find yourself attempting to drill with precision under questionable circumstances. This heavy-duty 16-1/2-inch drill press from Delta will help you get out of your, um, hole. Running off a 3/4-horsepower motor that can be wired for either 115 or 230 volts, it gives you an impressive deep plunge length of 3-3/8 inches and holds up to 5/8-inch-diameter bits. Solid cast-iron construction and a 3-1/8-inch column give it the industrial feel and durability we look for in this type of tool. You'll enjoy the rotating work base-which bevels, of course, 45 degrees each way for drilling angles-as well as the depth stop that can be set quickly and easily with micro adjustments and a locking ... moremechanism, great for repetitive drilling. While other models sometimes place hard-to-read speed and belt charts under the top cap, Delta uses a wide, clearly legible chart to explain how to configure the belts for each of 12 speeds(250 to 3,000 rpm) And, thanks to the smooth, cool-running induction motor inside, you're not likely to find yourself shopping for a drill press again for an extremely long time. Posted with
|
|
|
Delta / Rockwell 17-430 - 17" Drill Press + NO RESERVE!
Manufacturer: Delta/ Rockwell Model: 17-430 17" Drill Press Drill Chuck Included! Serial: 83A77029 Condition: We do not know the working condition of this machine. This machine is being sold for a school. It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME OF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th ... moreAND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. This is a drill offered by Delta/ Rockwell. Perfect for the home or office. Swing(in) 17 Drilling Capacity(in) 5/8 Chuck Size(in) 1/2 Table Size(in) 11" x 14" best guess) Electrical: 115 Volt 60 Hz 1 PH Dimensions: best guess) Length: 25" Width: 22" Height: 75" Weight: 400 lbs*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items being sold for Highland Park Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your act
|
|
|
DELTA ROCKWELL 17" DRILL PRESS QUILL CLAMP DP-600
Offering a quill clamp casting for a Rockwell Delta 17" Drill press This fits the 17" drills with DP-600 head casting This will not fit the later style 17" drills such as the 17-400 or 17-600 series Any questions: Or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
|
|
|
Delta 17-900 Variable Speed Drill Press
Delta 17-900 Variable Speed Drill Press Specifications Cat# 17-900 Serial# R8942 Hp: 3/4 Volts: 115/230 Rpm: 1720 Phase: 1 Hz: 60 For more information contact Carlton Carr at(843) 845-7433 or at carlton.carr@essindustrial.com We ship anywhere your freight handler or carrier. FOB Spartanburg SC 29303 MacDB# 2290 SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: RBI ESS accepts Bank Wire(Transfer) Money Order, PAYPAL, Certified Checks, Credit Card(3%Processing Fee) and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships worldwide and uses all common carriers including USPS. DHL, FEDEX, UPS and truck freight. When requested RBI ESS will combine multiple orders to reduce shipping costs, if possible. LOCAL PICKUPS ... moreREQUIRE PAYMENT OF LOCAL SALES TAX, UNLESS EXEMPTION IS PROVIDED. Contact us@ 864 444-4348 or email for special shipping instructions or for scheduling a pick up at our location in Spartanburg SC. USA. RETURN POLICY: Our goal at RBI ESS is to please our customers. We do our best to describe each item accurately. If an item arrives damaged or incorrectly described. We will work with you to resolve the situation. Any item damaged or incorrectly described that is returned must be returned within 7 days of receipt or no refund will be granted. Any refund given will be less all shipping costs. If there is a problem, please call us@ 864 641-7458 or email. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13f43061489-0xf2-
|
|
|
Delta Rockwell Drill Press Single Spindle 17", 12"x 11" Tilting Table (24610)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 24610. 17" Delta Rockwell Spindle Drill SERIAL NUMBER: 53-9899 GENERAL SPECIFICATIONS Floor Model Spindle Speeds. Variable: 300 to 2000 RPM Tilting Table 12" x 11" Base Surface: 13 1/2" x 9 3/4 machined base Quill Stroke: 4 3/4" Table Rising mechanism EQUIPPED WITH 1 HP Motor. 1725 RPM 220/60/3 Manuel Push Button Start No. 2M.T. Approximate Weight: 200 Lbs. Shipping Dimensions: 26" x 30" x 68" Tall F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood ... moreMachinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the
|
|
|
DELTA ROCKWELL 17" DRILL PRESS MOTOR MOUNT FOR EARLY 17
Offering a motor mount for a 17" Rockwell Delta drill press This fits the early style 17" drills with DP-600 head casting# Good shape. No extra holes or damage Any questions: e-mail. Or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
|
|
|
Enco 17" Floor Drill Press Model 40005 - Very Good Condition
Enco 17" Floor Drill Press Model 40005 Excellent Condition- Used lightly for many years by an artist in making frames for their own art. A little dusty and could use a good cleaning. But in excellent, operating condition. Perfect for industrial shop or your personal woodworking shop!
|
|
|
DELTA 16 1/2" FLOOR VARIABLE SPEED DRILL PRESS MODEL 17-925 (OC105)
Up for Sale! DELTA 16 1/2" FLOOR VARIABLE SPEED DRILL PRESS MODEL 17-925(OC105) SPECIFICATIONS: MODEL: 17-925 SERIAL# J9853 HP 3/4 RPM: 1725 VOLTS 115/230 SINGLE PHASE Drill press is in good working condition- You can preview and inspect minipress at our facility in Huntington Beach. California. We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. CALL. TEXT OR EMAIL WITH QUESTIONS. 714)658-5390 FREE LOADING IN ALL PURCHASES SE HABLA ESPAÑOL Visit our eBay store www.orangecountymachinery.com/ ph 714 658 5390
|
|
|
sears craftsman 17" drill press 5/8" chuck w/ key, 16 speed 200-3630 1.5 Hp
Up for sale is this good sears craftsman 17" drill press 5/8" chuck w/ key. 16 speed 200-3630 1.5 Hp. Item measures 64" tall and the table( Work area) is 14" x 14" has some scaring but not too bad. Item is ready for ready for shipping( NO CHARGE FOR PALLET OR BANDING) Item weight is 190LBS. Buyer is responsible for all shipping costs. If you need a shipping quote we can help. LOCAL PICK UP Is OK.
|
|
|
Vintage New-Old-Stock 1951 Delta Rockwell 17" Drill Press
For sale is a New-Old-Stock 1951 Delta 17" drill press. I purchased this from the Grandson of the original owner who had inherited it. This drill press was stored in his Grandfather garage for 62 years and never setup and operated. The"As-found condition photo" links below show the condition of the drill press when I purchased it and there is no dought in my mind that this drill press was never put in to service. Since most of the drill press was stored in the open air some refurbishment was need to put it into service. As noted above this is a 1951 Delta 17" drill press and its m odel number 17-210. This is the slow speed model with 5 speeds of 385. 600, 935, 1450 and 2240 RPM. It has the large production table, a MT-2 spindle nose and a Jacobs 6A chuck. The drill press has a single phase. 3/4 HP Delta capacitor start ... moremotor that will run on 110 or 220 volts and is currently wired to run from a standard 120 volt wall plug. The drill press has been completely disassembled and the rust removed from the bare metal surfaces. Dried oil& grease removed, and about 90% of the rust removed from the painted surfaces. The original finish was retained with all its faults and refinished with two coats of matte clear. So the drill press has a lot of charactor, so you will see some bare metal and some rust along with the gray paint under the clear finish. The work table has some light pitting and the Jacobs chuck sleeve also has a little pitting. The column has has some scratches, but no noticable pitting. The pot-metal knobs and handles have some bubbling under the chrome plating. All 4 bearings in the drill press spindle were replaced since the factory install bearings had dried out and were unusable. The motor bearings were good and surprisingly the cord was also good. A new belt was also provided. This is a nice drill press and you won't be disappointed. If you would like to inspect the drill press before biding or making an offer drop me an email to arange a time to come kick the tires. PS the c
|
|
|
Vintage 1955 Delta Rockwell 17" Drill Press Do-It-Yourself Project
For sale is a 1955 vintage Delta 17" drill press DIY project. Model number 17-210. This is the slow speed model with 5 speeds of 385. 600, 935, 1450 and 2240 RPM. It has the MT-2 spindle nose with a Jacobs No. 34 chuck. The motor single phase. 1/2 HP Delta motor and is wired to run from a standard 120 volt wall plug. The motor bearings are good. It has the push-pull start rod compatible switch, just slip on the pulley and bolt it on, its ready to go. As I noted this is a Do-It-Yourself project machine. I have inspected the drill press and there are no missing or broken parts. What was missing or broken has been replaced or is sitting on the table in the pictures. There are 4 new bearings for the spindle included. The spindle turns freely now and if you don't want the bearings you can take $90 of the asking price. Just note that your ... moreoffer is without bearings. I have set this up as best I can for you to be successful rebuilding a vintage drill press for your workshop. Paint it. Clean it, polish it, etc. as you see fit. PS the cart is not included in the sale.
|
|
|
Delta Rockwell Drill Press 17" U.S.A. Variable Speed Single Phase
This is a U.S.A. made 17" Rockwell drill press on a mobile base for sale. It has a 1.5 hp motor. 120 volt, single phase and is a variable speed machine. Very nice condition floor model. I have added a custom slow speed attachment for drilling up to 1" in soft steel. Number 2 morse taper spindle with the drill chuck and key included. This unit runs quiet, no vibration, smooth speed changes. I am downsizing my operation and have a Bridgeport and another drill press, this one offered for sale. See my other items. Please see pictures. Free delivery within a 100 mile radius of Terre Haute. In. Buyer pays all truck shipping fees if shipped.
|
|
|
Dumore 17,000 rpm miniature drill press model 16-011
This is a bit chin' miniature counter top drill press. It works as good as new and it turns incredibly high rpm. It stands 16" tall. The model number is 16-011
|
|
|
Delta Mortising attachment tool model 17-905 with chisel & bit for Drill press
This is a Delta Mortising attachment tool model 17-905 for use with all 14" drill press. Included is a chisel and drill bit. Tool is in excellent shape. MADE IN U.S.A. I accept Paypal. Cashiers checks for immediate shipping. Personal checks must clear prior to shipping. I always post feedback upon receive of your feed back. If you have a problem please e-mail me before posting feedback. Thank you for bidding. Please look at my other auctions. Check my feedback and bid with confidence.
|
|
|
Delta 16-1/2" Floor Drill Press Cat. No. 17-900 17", 115V, 1Ph
Delta 16-1/2" Floor Drill Press Cat. No. 17-900 General Info: Stock# GS-713-1024 Condition: Used Tested: Yes. Good working condition Brand: Delta Model:17-900 Serial: R 9121 Year: N/A Unit Dimensions: 66" H x 30" D x 18" W Unit Weight: 200Lbs Location: Stone Mountain. GA Specifications: 16.5" Swing. 3/4HP Motor, 115/230V(Wired 115) 1PH, Spindle Travel 3-1/4" Column Diameter 3.13" Table size 12" x 12" RPM range from 250 to 3000, cord& Plug Additional Info: Unit has been tested and runs good. Missing one handle for the quill travel. Other than some rust build up. Unit is in good shape. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Drive Stone Mountain. GA 3008 3 It is always recommend to come out and inspect the machinery listed before purchase. If ... moreyou have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
DELTA ROCKWELL 17 INCH DRILL PRESS DEPTH GAUGE ROD
STOP ROD DEPTH GAUGE FROM A DELTA ROCKWELL MODEL 17-600 DRILL PRESS. 6" STROKE APPOX. 9" OVER ALL. NICE CONDITION.
|
|
|
DELTA ROCKWELL 17" DRILL PRESS UPPER POWER HEAD SPINDLE ASSEMBLY - VINTAGE
Delta 17" drill press upper power head/ spindle assembly. I believe this came off a drill press manufactured in the mid to late 1960's. The manual which came with it is dated 1966. Drill press serial number is SN# 119-4043. The power head is in good overall condition with no broken or cracked parts. One small machine screw is missing holding the tightening lever onto its splines shaft that adjusts the tension holding the power head onto the drill presses post/ column. This is on the left side of the power head if looking at its front. All parts a functioning very well. The spring return on the return stroke is smooth and even. Spindle bearings are in very good shape and run freely. The spindle is true and the chuck runs with any run out. Comes with Jacobs chuck number#633 with a 1/2" capacity, and a Jacobs#3 series chuck key. ... moreIncluded also is the stepped pulley for the spindle though the largest pulley has two very slight dents in the upper rim of the pulley one might be able to file these out. Only two bolts on the rear motor mounting plate are with it. I don't have the motor, upper guard, or the other stepped pulley. Drill press mounts on a 2-3/4" column or post. The item will be well packed to insure safe delivery. $2 extra will insure the item for $300. Please wait for an invoice before paying. Will ship Fed Ex or UPS.
|
|
|
Walker turner drill press light heavyweight 17
Walker Turner light heavyweight 17 drill press. 3 phase. I removed this from Rockwell aerospace in bellflower ca in 1999. During the shutdown of the plant. It was in use at that time. I'm listing it as parts only because I do not have 3 phase in my backyard to test it. The pics show it on a bench, the bench is not included in the auction! This is a pick up only auction. This has been in my shipping container since 1999 and I just recently removed it to list for sale. Please email if you have any questions.
|
|
|
Vintage Delta Milwaukee 17" Drill Press with Power Feed /110 Volt Single Phase
Vintage Delta Milwaukee 17" Drill Press S# 32-6046 with 5 spindle speeds changed by step pulley and 4 powerfeed speeds changed by step pulley(belt needed) Table is very heavy duty with collant collection trough. Easy table height adjustment. Will load on your truck or trailer or help you to arrange shipping. Please ask questions.
|
|
|
DELTA 17-900 DRILL PRESS 12 SPEED 16 1/2" Rotary Table Tilt
DELTA 17-900 DRILL PRESS 12 SPEED 16 1/2" Rotary Table Tilt Floor Model 3/4 HP dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1432e012638-0xe5-
|
|
|
WALKER TURNER Industrial DRILL PRESS by Rockwell / delta gang 17 inch
please click then supersize the photos for a good look Rockwell. Walker-Turner Division, Drill Press Catalog Number 67-000 Serial Number 1317049 This was once part of a gang of drill presses in sombody's shop. You will be re-directed off eBay so be sure to add this to your Watched list before clicking the link. I plugged this in and it does run It has different pulleys inside to change gears Includes the chuck. Pick up only. I'm flexible, if you need a few weeks that's fine just let me know when you can get here. As with all my large items. Buyer has the right to change his mind on the day of pick up for any reason without hard feelings from me. Pay me with PayPal or in cash the day of pick up. Whatever is easier for you. M any vintage items listed this week. Click here to see my other listings.
|
|
|
DELTA MILWAUKEE 17" DRILL PRESS FLOOR STANDING
RIMCO ROBERT IVENS MACHINERY COMPANY 613 W. Bruce St. Milwaukee WI 53204 414-272-6686 Welcome to Robert Ivens Machinery Company Our Mission: Productive and Satisfied Customers. Up for AUCTION: DELTA MILWAUKEE 17" DRILL PRESS FLOOR STANDING In good/used condition Runs well and will serve many happy years! Machinist#3 morse taper quill STD speed pulleys Original motor Table is of the production style 40'S ERA DRILL PRESS! 3/4HP 3 phase 220/440v Serial no. UNK. Check photos for details STK# DP1017 I SHIP ITEMS THIS HEAVY ALL THE TIME. ASK ME FOR A QUOTE! Email us with any questions! WE COMBINE SHIPPING! Check out my! Be sure to add me to your! Robert Ivens Machinery Company(RIMCO) is Wisconsin's largest dealer in used woodworking machinery A sole proprietorship in business for more than twenty-five years, RIMCO's business philosophy ... moreis based upon value and customer satisfaction. If you have an interest in woodworking machinery. You are welcome to call and ask about our extensive. Ever changing inventory. Your business will be most appreciated.
|
|
|
DELTA ROCKWELL DP600 17" DRILL PRESS HANDLE
FROM DRILL PRESS SHOWN IN PHOTO DP600 HEAD. 1 1/4" BORE CAST# DP631 4" OUTSIDE DIA. RETAINED BY 7/16" DIA. PIN 3 ARMS WITH 7/16-20 THREAD AND PHENOLIC BALLS. NO DAMAGE BUT NEEDS CLEAN WITH LITE RUST CHIPPED PAINT
|
|
|
Delta 16.5" Floor Drill Press Model 17-900 - 12" x 12" Tilting Table
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Delta 16.5" Floor Drill Press Model 17-900- 12" x 12" Tilting Table Item Description: This is a Delta 16.5" Floor Drill Press 17-900. The power switch is broken. Specifications from the manufacturer: ... moreCapacity: 16 1/2' x 5/8" Drilling Cap. 5/8" Swing: 16 1/2" Table Size Tilting: 12" x 12" Spindle Speeds(12) 250-3.000 Rpm. Spindle Quill Taper: 2 MT. Spindle Quill Travel: 3 3/8" Column Diameter: 3" Weight: 200 LBS. Table adjustment and locking mechanism. Drill Chuck. HORSEPOWER: 3/4 1 Phase. The items included in this auction were not tested at inspection. Their operational status is unknown. NOTES: Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Thermal. CA, 92274. Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 38387) nbsp, nbsp, Model: 17-900, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, ar
|
|
|
DELTA DP600 17" DRILL PRESS SPINDLE MACHINERY
FROM DP 600 HEAD SHOWN IN PHOTO#2 MORSE TAPER VERY GOOD INSIDE TAPER AWAS CLEANED AND INSPECTED VERY FEW MINOR SMALL RADIAL LINES LOCKS EXCELLENT EXTERNAL RUST ON O.D. OF TAPER BODY WILL CLEAN UP WITH SOME EFFORT. INCLUDES SPLINED DRIVE SHAFT IN VERY GOOD CONDITION.670 DIA. REF FOR SPINDLE PULLEY NEEDS CLEANED UP. DID NOT DIS-ASSEMBLE INTERNAL BEARING- SPINS FREELY- NO SLOP BUT I WOULD AT LEAST CLEAN-UP OR REPLACE. REF. SPINDLE BODY 2 1/4 O.D. BY 9 3/8" LONG AND 3 1/2" LONG MORSE SHAFT. GOOD RACK- NO WEAR. NICE CLEAN O.D. ONE MARK(SEE PHOTO) RED ARROW FROM DEPTH STOP. COLLAR(NO HARM) UPPER BEARINGS WERE DISCARDED"DIRTY + RASPY" FOR SPLINE DRIVE)
|
|
|
Delta 17" Drill Press High Speed Pulley Set (Spindle & Motor) 725 & 826, 5 Speed
This is set of original Delta pulleys for the 17" drill press. These fit the older model drill press. These two pulleys were discovered at an estate sale and were in a box of Delta machine parts. Both of the pulleys are original Delta equipment and fit a specific range of machines. Please make sure these are what you want before you bid. The motor pulley is#725 and shows very little wear. The original Delta finish is still present on the inside of the pulley grooves. This pulley is 6 1/2 inches in diameter at the bottom and 2 3/4 inches at the top. The bore is 3/4 inches with a key way. The spindle pulley is#826 and has similar wear to the other pulley. Very minimal. This pulley is 6 1/2 inches at the bottom and 2 3/4 inches at the top. The bore is 17mm(which is correct according to my research) and it's also keyed. Each pulley has ... more5 speeds. They are in outstanding original condition and ready for your drill press or other application. These were designed as the high speed set for a 17 inch drill press and I believe they fit the earliest models. Again, make sure this set is what you are looking for as I am not a expert as to which machines they will work with. The belt in image#1 is included. Feel free to provide any information I may have omitted in the listing. I appreciate any input. Also ask questions if you have any. I will ship worldwide and will ship this set to the USA priority mail in the medium flat rate box. International bidders. This set weighs about 7 pounds packed and I ship to your preference. I always combine shipping to save you money and charge no extra fees to ship your item. You pay only the actual shipping costs! Please view my other listings for early American items. Axes, and saws. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144f29a2bb7-0x107-
|
|
|
*DELTA* 17" Drill Press ~the Complete Head Raising Mechanism~ Rockwell
Here are all the parts you'll need to add a Head Raising Mechanism to your DELTA 17" Drill Press These parts come from a table mounted Delta 17" drill press. This is every single part you'll need. Right down to the tapered pins, and set screws. I inspected. Cleaned, and oiled everything. All these parts are in Very Good Working condition! It's very easy to install, and I'll be happy to answer any technical questions you have; regarding the installation. ~* ~ Let me know if you've got any questions. Thanks!
|
|
|
DELTA ROCKWELL 17 INCH DRILL PRESS COLLAR DP 204 2 3/4" COLUMN
Up for Sale is a Delta rockwell 17 inch drill press column table collar. fits 2 3/4" column. This item is in good usable condition. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including ... morereturn shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect the percentage the host takes. For ex sample if I'm sending a 100 pound item from Massachusetts to Oregon via UPS Ground I would be paying 10 dollars towards shipping. Heavier trucked items the amoun
|
|
|
excellent *DELTA* 17" Drill Press ~Slow Speed Spindle Pulley~ Rockwell Milwaukee
This is the Spindle Pulley from a DELTA 17" Drill Press It's the larger Slow Speed version The part No. is: DP-825 It's in Great Condition! ~* ~ Let me know if you've got any questions! Thanks!
|
|
|
Delta Heavy Duty Drill Press 16 1/2 2 MT Model 17-900
Delta Heavy Duty Drill Press 16 1/2" 2 Morse Taper Spindle with 5/8" Chuck. Used Very Little
|
|
|
Delta Rockwell 17-600 17" Drill Press, Variable Speed, 115V, 1-Phase
Delta Rockwell 17-600 17" Drill Press General Info: Stock# CB-141002-34 Machine Name:Delta Rockwell 17-600 17" Drill Press Condition: Used. Needs work Tested: Yes. Partial working condition Brand: Delta Rockwell Model: 17-600 Serial: 1399889 Year: N/A Shipping Weight: 750 Lbs. Shipping Dimensions: 48" L x 40" W x 68" H Location: Stone Mountain. GA Specifications: Delta Rockwell 17-600 17" Drill Press. 17" Swing. 3/4HP Motor, 115/230V, 1-Phase, Variable Speed Range from 230 to 2830 RPM, 14" x 11" Working Table surface, 6" Spindle Travel, 1/2" Jacobs Chuck, Cord& Plug. Additional Info: The Delta Rockwell 17-600 has been tested and has some issues. When the switch is turn on. The motor will want to start turning on its own, but requires a little push to get going. The variable speed ... moredoes not work. Other than those issues, unit is in good shape. Machine can be shown under power for inspection. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week
|
|
|
Central Machinery 17" Floor Stand Drill Press 16 speed Model 43389
This unit is like new. Barely used comes with everything you see in the pictures. Vise and all. Can deliver in the local area for fee contact for details.
|
|
|
17" Rockwell Tapping Drill Press Head
17" Rockwell Tapping Drill Press Head. Serial Number: 1499399 Equip& Specs: Model: 17-600. 5 Spindle Speeds. 2MT Spindle. With Procunier tapping head. 6" Spindle travel. Head Mounted to 3-1/2" Diameter post Elect Specs: 3/4 HP; 220/460/3/60. Condition: Good. Location: 26470 Lakeland Blvd. Euclid, OH 44132. Guarantee: 30 day return privilege- Freight prepaid by Buyer. Terms: Net With Order. Price: FOB Location. $300.00. If you have any questions regarding this machine or its tools. Please don't hesitate to email us with questions. Most emails will be responded to within 24 business hours. Include the Stock number with your email. Here at Small Tools Inc. Our highly skilled staff fully runs and tests the machines for sale to ensure you get a quality product. If you are able to. Stop in to our warehouse. We can put you ... morein the driver's seat and have you operate all of the machine's features before you buy. We pride ourselves on being an honest American-owned company. Shipping is of the responsibility of the buyer. But a free quote can be given. Contact us for more information on shipping or arrangements. Please let us know if you are shipping to a business or residential address. This machine is subject to prior sale in our brick-and-mortar building unless otherwise noted. Thank you for looking! Very Truly Yours, Small Tools Inc. 1(800) 821-2674
|
|
|
Rockwell 17" Drill Press 3/4 HP 1/2" Chuck 220V 3 Phase
419-445-1111 SKU: DIS1803 Rockwell 17" Drill Press 3/4 HP 1/2" Chuck 220V 3 Phase. In Stock: 1 Condition: Used Voltage Rating: 208-220/240 Manufacturer: Rockwell Horsepower(HP) 3/4 Serial Number: 126-5515 Listed By: Bill Rockwell 17" Drill Press 3/4 HP 5 Speed 1/2 Chuck with#2 Morris Taper 16" x 12" table Motor: 208-220/440V(Wired for 220V) 3 Phase 3/4 HP 1725/1425 RPM The return spring is worn so the quill does not always retract on its own. At Dave's Industrial Surplus we strive to make every transaction as smooth as possible. This begins before items are listed. We go through every item with a fine tooth comb to make sure all items are both clean. And complete. We have over 10 years combined experience in Industrial Surplus. We know what we sell so feel assured that you are going to be dealt with in a professional ... moremanor from the beginning to the end of your transaction with us. Don't hesitate to contact us with any questions you may have. We love to hear from you. Payment must be received within 4 days of items end. If more time is required please contact us PRIOR to your purchase of any of our items. We prefer Paypal. Please contact us for other payment types accepted. We will not ship any items paid for with a echeck until the check clears our bank. This could take as many as 10 days. We ship via LTL. USPS, or UPS Ground. If you require a quicker shipping method please contact us for a price quote. When an item is marked Freight please contact us for a shipping quote. We will need your zip code and whether the shipment is delivering to a Residential or Commercial address. We will do everything possible to aid in arranging for delivery or LTL shipping. If you need a liftgate or not, a telephone number, and what day and time the delivery can be made. Please contact us for all International Shipments. For International Freight Shipments we can ship to the US Borders as long as you can provide Transportation from there to your location and have a customs broker to clear the shipm
|
|
|
DAYTON FLOOR MODEL DRILL PRESS 17"
DAYTON FLOOR MODEL DRILL PRESS MODEL- 3Z918E- 17" 115/230V.60Hz,1PH In a New Shape. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 QUESTIONS? Call us at 323.836.3006 or Email at commercialsupply777@gmail.com Shipping Available Unit Ships From Los Angeles. CA 90201 We have all types of Office Furniture and Other commercial Supply and Equipment. All items are checked and serviced before being resold. If you are looking for a specific item and you can’t find it on our site. Send us an email: COMMERCIALSUPPLY777@GMAIL.COM and we will try to locate it for you.
|
|
|
DRILL PRESS 17" SWING 1/2 HP SINGLE PHASE INDUSTRIAL TOOL
HEAVY DUTY DRILL PRESS 17" SWING 1/2 HP SINGLE PHASE INDUSTRIAL TOOL UNSURE OF MANUFACTURER. HOWEVER, I WOULD GUESS IT TO BE DELTA. 17" SWING. PLEASE NOTE THE DIAL INDICATOR IS.001" THE QUILL IS ALMOST PERFECTLY CONCENTRIC MOTOR SPECIFICATION: CATALOG NUMBER: S113 FREQUENCY: 60Hz SINGLE PHASE HORSE POWER: 1/2 RPM: 1725 VOLTS: 115/230V AMPS: 9.2/4.6 UNIT APPEARS IN GOOD WORKING CONDITION*SHIPPING INFORMATION* We recommend Freightquote or the Freight company of your choice. Buyer is responsible for cost and arrangement of freight shipping. We do not charge for loading. Unit can only be shipped via freight. For freight inquiry we recommend Tony Sidoti at FreightQuote You can reach him at 1800-323-5441 Ext 1383. You can either supply him the ebay listing ID. Or you can use the shipping information below to better help you. We charge ... morea $60 palletizing fee for this unit. Unit will be shrink wrapped in cardboard and steel banded to pallet. Shipping Dimension: Approximate Dimension: 36"W x 36"L x 76"H Approximate Weight: 380 lbs. Comes as shown in photos Item Condition: Used. In good physical condition. Powers on. All switches actuate properly. We guarantee that this unit will not be DOA. And offer a 14 day return policy. Why buy from us? It is our goal to turn every bidder into a repeat buyer. Unless stated otherwise in the description. All merchandise is GUARANTEED to be as described and to be in working order upon arrival. PLEASE NOTE: Unit MUST be removed from our facility within one week of end of auction. Please be sure to check out out other listings on Ebay. Item will immediately be re-listed if payment is not received within 5 working days. Please contact seller if for any reason payment cannot be made on time. Check out the photos provided. Thank you for looking and Good Luck! Sales Tax: Sales Tax will apply to items sold to buyers who take delivery in California. We will send this unit via freight. We do not charge handling fees; high bidder pays actual shipping charges. Item may
|
|
|
Very nice *DELTA* 17" Drill Press~ Pulley Set (Slo-Speed) ~ Rockwell
This Pulley Set is for a DELTA 17" Drill Press This Set has the larger, Slo-Speed version of the Spindle Pulley(part# DP-825) The matching Motor Pulley has part# DP-645) Both of these pulleys are in Excellent condition. I couldn't find any cracks. Breaks, or signs of significant wear. Altogether. A really Nice Set! ~*~ ~Pulleys will be very well packaged for shipment.~ ~* ~ Let me know. If you've got questions. Thanks!
|
|
|
Refurbished Classic 1948 Delta Rockwell 17" Drill Press
For sale is a refurbished 1948 vintage Delta. Model number 17-210, 17" drill press. This is the slow speed model with 5 speeds of 385, show contact info and 2240 RPM. The production table has a few purpose drilled thru-holes to hold vices and jigs, but only a few has a few minor hits from drill bits. The drill press has a single phase, 1 HP Delta Repulsion-Induction motor and is wired to run from a standard 120 volt wall plug. The motor was serviced(New bearings& brushes) before I acquired it and it still has the original factory finish. The drill press has been completely disassembled, sand blasted, and refinished. All bearings in the drill press have been replaced. New wiring, overloads, and belt. The drill press has MT-2 spindle nose with a Jacobs No.3 chuck mounted. The capacity of the chuck is 0 to 17/32" The run-out as ... moremeasured on a pin 1.5" down from the chuck is 0.002" This is the heavy duty configuration for this drill press and its ready to go to work. PS the cart is not included with the drill press. Shipping: If you want to arrange shipping with a freight company and pay yourself. I can bolt the drill press on a pallet/skid and shrink wrap it for $50. Weight would be 399 pounds, 3' x 4' x 6' dimension, residential pick up with lift-gate truck from driveway at zip code 92868. Pick up days would be Monday thru Wednesday. Contact me before biding so that agree on scheduling.
|
|
|
Rockwell Drill Press 17" Swing
This is a Rockwell model 17-600 17" swing drill. It has a 23-1/2" X 36" production table with oil channel. Spindle is a#2 Morse taper and the motor is 3/4 Hp with forward and reverse. The motor is 3 phase but can be run with single or three phase power with the installed VFD. The VFD allows for infinitely variable speed control using the small dial mounted under the On/Off switch. Also included are the 3/4" and 1/2" Jacobs drill chucks. Drill is 100% working and ready to plug in and use. I can load in the back of a pickup truck, or on a trailer.LOCAL PICKUP ONLY- a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-146f92f4bda-0x108-
|
|
|
Delta Rockwell Milwaukee 17" Drill Press High Speed Spindle Pulley DP-826 or 626
5 STEP SINDLE PULLEY FROM 17" DELTA ROCKWELL MILWAUKEE DRILL PRESS. SAYS"DP-626" or"DP-826" ON IT. PULLEY IS IN EXCELLENT CONDITION WITH NO BREAKS. CRACKS OR REPAIRS.
|
|
|
Dayton 17 inch drill press (1)
We accept PayPal! You are bidding on a Dayton 17 inch drill press. The switch is broken. Item is located in Shirley. NY 11967. This item will not be available for pickup until August 4th and must be picked up on or before August 15th. Packing and Shipping is not available. Please bring your own help when picking up equipment. PLEASE READ PAYMENT AND PICK UP INSTRUCTIONS BELOW BEFORE BIDDING. Exact working condition is unknown. Potential buyers are strongly urged to inspect unit before bidding. No Eastern Suffolk BOCES employee or spouse may bid on auction. Final discretion of sale shall be the responsibility of the Manager of Administrative Services as to ensure the absence of a conflict of interest and/or appearance of impropriety. Offered by: Eastern Suffolk BOCES Capital Asset Management 15 Andrea Road Holbrook. NY phone: 631) 244-4292. ... moreFax: 631) 244-4017 9:00 a.m. 2:00 p.m. weekdays(excluding holidays) Terms of sale: All Sales Are Final Condition: Items are offered as is with no warranty. Known defects are listed. But the absence of any indicated deficiencies does not mean the item may not have deficiencies. The potential buyer is strongly encouraged to inspect prior to bidding. Shipping: The seller does not ship. The buyer is responsible for picking up all merchandise. Payment: Full payment is due within ten(10) days of notice of award. Payment is made through PayPal or exact cash on pickup TAX: NY State sales tax is collected regardless of buyer's residence. Unless tax exempt. Further information about tax-exempt status must be provided to Eastern Suffolk BOCES. Important Information: No Eastern Suffolk BOCES employee or spouse may bid on auction. Final discretion of sale shall be the responsibility of the Manager of Administrative Services as to ensure the absence of a conflict of interest and/or appearance of impropriety. To arrange for inspection please call Tracy Trapani at(631) 244-4292. Items are usually available for inspection weekdays(excluding holidays) from 9:00am to 2:00pm. Appointments
|
|
|
VINTAGE DELTA 17" DRILL PRESS HEADSTOCK RAISING GEAR SET-UP
From an 1940's era drill press. This is the complete set-up that fits in drill press heads to raise and lower them. Includes the gear. Handle with bearings and gear, rack, collar and the bearing for the top of the collar. The parts can also be used in a table raising and lowering unit from the same drill press.
|
|
|
VINTAGE DELTA 17" DRILL PRESS TABLE - FROM A 600 CASTING SERIES DRILL PRESS
From an early 1940's era drill press. There are extra holes drilled across the top surface.
|
|
|
VINTAGE DELTA 17" DRILL PRESS FRONT LABEL - INCLUDES SCREWS
From an 1940's era drill press.
|
|
|
VINTAGE DELTA 17" DRILL PRESS QUILL ASSEMBLY - COMPLETE
This is complete with the lower quill. Upper quill, housing, bearings and cap. From an early 1940's era drill press.
|
|
|
VINTAGE DELTA 17" DRILL PRESS RAISING MECHANISM - COMPLETE
This is the complete set-up for raising and lowering the table on an early 1940's era drill press. 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-14750b53d04-0x110-
|
|
|
VINTAGE DELTA 17" DRILL PRESS QUILL RETURN SPRING - 1940'S ERA
Includes the return spring and front housing. The rear housing is damaged.
|
|
|
VINTAGE DELTA 17" DRILL PRESS DEPTH STOP/COLLAR - 1940'S ERA
Includes the collar. Rod and nuts. This is from an early 1940's drill press.
|
|
|
VINTAGE DELTA 17" DRILL PRESS QUILL HANDLE - 1940'S ERA
Includes the quill handle. Pinion and locking knob.
|
|
|
VINTAGE DELTA 17" DRILL PRESS MOTOR MOUNT - 1940'S ERA
Part#DP651.
|
|
|
VINTAGE DELTA 17" DRILL PRESS FRONT CASTING - 1940'S ERA
This is the bare casting. Part#DP600.
|
|
|
VINTAGE DELTA 17" DRILL PRESS STAND & BASE - 1940'S
This is from an early 1940's drill press. Please contact me for an accurate shipping quote as EBay will not let it go by FedEx which will be cheaper than UPS. Also. This will ship in 2 packages so the EBay is not correct at all.
|
|
|
*DELTA* 17" Drill Press (DP-600) Head Casting with Spindle, Depth Gage, and more
This is the Head Casting from a DELTA 17" Drill Press I think this is considered the'Older' style. I had picked up 3 of the table mounted ones; a little while back I was in the process of re-furbishing this one for myself. I'm moving my shop at the moment. Though, and need to lighten the load. I thoroughly cleaned this casting of grease and rust. Primed it. And painted it a light gray metallic Rustoleum. The casting is in excellent condition. There are no breaks, repairs. Modifications, or even significant wear. ~* ~ Included with this casting, in this listing. Are the: Quill/ Spindle assembly with bearings. Pinion with handle Depth Gage Motor mount Quill lock bolts ~All these parts are in great condition.~ ~* ~ ~The column shown. Is not included with this listing. But is available separately.~ ~* ~ The'DELTA' is ... moregone from the front badge. But it is otherwise in good condition. ~* ~ The depth gauge holder, which mounts on the quill, has a slightly larger I.D. than the O.D. of the quill. An aluminum spacer takes up the difference. See photos) I got this depth gauge this way, attached to a Delta 17" drill press. I don't know what the story behind this is. Nevertheless. The parts fit very well together; and work well. When loose. The assembly slides easily on the quill. And when tightened it snugs up very securely. An Allen bolt tightens the assembly, rather than the standard hex bolt. The spacer stays in place well. ~* ~ I used Allen bolts to secure the motor mount. The wrench. For them, is included. ~* ~ The Spindle. Quill, and Bearings are all in very good condition; as is the Pinion. And handle. The Spindle has a: Morse 2 Taper(MT2) ~* ~ The complete assembly, as shown. Weighs: 60 lb's It will be securely packaged, and shipped via UPS. I don't charge for labor. Or materials, for packaging. ~* ~ Let me know. If you've got questions. Item. Is located in Providence, RI It is available for inspection, at my shop there. And can be picked up there. As well. Thanks! 643.Rcm
|
|
|
VINTAGE DELTA 17" DRILL PRESS FRONT PULLEY - 5 STEP, 4 3/4" - 8 1/2" -.650" BORE
1940'S era. Includes key.
|
|
|
*DELTA* 17" Drill Press ~Hi & Lo Speed and Motor Pulley~ Rockwell *Walker-Turner
Here's a nice Set of Pulleys for the DELTA 17" Drill Press ~* ~ All of these are in Good Working Condition! ~* ~ The Pulleys included here are: The largest one is the: part# DDP- 625 This is the'Lo- Speed' Spindle Pulley. This particular one doesn't have the part No. cast into it; but. I have an older version, in the shop. With the part No. on it. And they are exactly the same. This pulley was on the spindle of an early 1960's Walker-Turner Rockwell version of the 17" drill press. This pulley has a 5/8" arbor, and fits older versions of the 17" drill press; just fine. I think that this pulley's part# may. Later on, have changed to: DDP-825) ~~~ Also included here is the Motor pulley with part# DDP-645. This pulley is from a 1950's era Delta 17" drill press. On that drill press. The 645 ... moreis used as the Motor pulley, and the(previously mentioned) 625 is used as the Spindle pulley; for the'Lo- Speed' set up. This pulley has a: 3/4" arbor. ~~~ The 3rd Pulley included here, carries the model# DDP- 725. On the early'60's Walker-Turner/ Rockwell 17" drill press. This was actually used as the motor pulley. It was on the one I have. Anyway. I looked it up in the manual for this drill press. But different part#s were used in the manual. I've seen that on other machines, from that time period. When Rockwell's inventory# for purposes of ordering a new part; didn't match the part No. on the item. Now on the earlier DELTA 17" drill presses. This( 725) was used as the Spindle pulley for the'Hi- Speed' pulley set up. This is that exact same pulley; with one difference. This pulley has a: 3/4" arbor. That's because. On the drill press it was on. It was used as the motor pulley. I could. However, be used as a Spindle pulley; but would simply need to be adapted to the 5/8" arbor size. With the addition of a simple bushing; this would function just fine; in that capacity. ~* ~ Anyhow. I just thought I'd try sellin
|
|
|
Delta Rockwell Milwaukee DP-600 17" Drill Press Slow Speed Spindle Pulley DP-825
5 STEP SPINDLE PULLEY FROM 17" DELTA ROCKWELL MILWAUKEE DRILL PRESS. PULLEY No. DP-825 PULLEY IS IN EXCELLENT CONDITION WITH NO BREAKS. CRACKS OR REPAIRS.
|
|
|
16.5" Delta Drill Press 3/4HP Floor Model 17-965
Please note the shaft had some rust but moves great just wipe WD-40. Used less than 200 hours Also include the drill press table as pictured. If your projects require you to drill with big bits or if you find yourself attempting to drill with precision under questionable circumstances. This heavy-duty 16-1/2-inch drill press from Delta will help you get out of your, um, hole. Running off a 3/4-horsepower motor that can be wired for either 115 or 230 volts, it gives you an impressive deep plunge length of 4-7/8 inches and holds up to 5/8-inch-diameter bits. Solid cast-iron construction and a 3-1/8-inch column give it the industrial feel and durability we look for in this type of tool. You'll enjoy the rotating work base-which bevels, of course, 45 degrees each way for drilling angles-as well as the depth stop that can be set quickly and ... moreeasily with microadjustments and a locking mechanism, great for repetitive drilling. While other models sometimes place hard-to-read speed and belt charts under the top cap, Delta uses a wide, clearly legible chart to explain how to configure the belts for each of 16 speeds(215 to 2,720 rpm) And, thanks to the smooth, cool-running induction motor inside, you're not likely to find yourself shopping for a drill press again for an extremely long time. Justin Paul From the Manufacturer This 16-1/2-inch drill press has the muscle to handle a wide range of applications. The powerful 3/4-horsepower induction motor provides long-lasting. Smooth performance and can also be wired for 230 volts. It offers 16 spindle speeds from 215 to 2,720 rpm to match a wide variety of drilling applications and the chuck accepts bits with shank diameters up to 5/8-inch. Changing speeds is easy with a tension-release handle and charts inside the pulley cover that diagram how to select and set the speed based on the bit size and material to be drilled. The large 14-by-14-inch table tilts 45 degrees left or right for angled drilling and has table slots and side ledges for easy attachment of clamps and
|
|
|
Rockwell 17" Drill Press 1/2 hp 1750rpm
Rockwell 17" Drill Press 1/2 hp 1750rpm runs strong comes with a ettco tapping head
|
|
|
Delta Rockwell Milwaukee DP-600 17" Drill Press Motor Pulley DP-645 3/4" Bore
5 STEP MOTOR PULLEY FROM 17" DELTA ROCKWELL MILWAUKEE DRILL PRESS. PULLEY No. DP-645 HAS 3/4" KEYED BORE. SMALLEST DIA. IS 2" and LARGEST DIA. IS 6" PULLEY IS IN EXCELLENT CONDITION WITH NO BREAKS. CRACKS OR REPAIRS.
|
|
|
Rockwell 17" Drill Press 1/2 HP 1/2" Chuck Single Phase
419-445-1111 SKU: DIS2408 Rockwell 17" Drill Press 1/2 HP 1/2" Chuck Single Phase. In Stock: 1 Condition: Used Voltage Rating: 115/230 Manufacturer: Rockwell Horsepower(HP) 1/2 Serial Number: 108-4779 Listed By: Connie Rockwell 17" Drill Press 1/2 HP 1/2 Chuck approximatley 29" x 18" wooden table bolted on to original table. unknown condition of original table. Motor: 115/230 1 Phase 1/2 HP 1725 RPM In good used condition. Has not been tested. See pictures for more information. At Dave's Industrial Surplus we strive to make every transaction as smooth as possible. This begins before items are listed. We go through every item with a fine tooth comb to make sure all items are both clean. And complete. We have over 10 years combined experience in Industrial Surplus. We know what we sell so feel assured that you are ... moregoing to be dealt with in a professional manor from the beginning to the end of your transaction with us. Don't hesitate to contact us with any questions you may have. We love to hear from you. Payment must be received within 4 days of items end. If more time is required please contact us PRIOR to your purchase of any of our items. We prefer Paypal. Please contact us for other payment types accepted. We will not ship any items paid for with a echeck until the check clears our bank. This could take as many as 10 days. We ship via LTL. USPS, or UPS Ground. If you require a quicker shipping method please contact us for a price quote. When an item is marked Freight please contact us for a shipping quote. We will need your zip code and whether the shipment is delivering to a Residential or Commercial address. We will do everything possible to aid in arranging for delivery or LTL shipping. If you need a liftgate or not, a telephone number, and what day and time the delivery can be made. Please contact us for all International Shipments. For International Freight Shipments we can ship to the US Borders as long as you can provide Transportation from there to your location and have
|
|
|
VINTAGE DELTA 17" DRILL PRESS QUILL ASSEMBLY - COMPLETE Spindle and Chuck
Complete Quill and Spindle assy as shown. This worked awesome! Plug and play! FREE SHIPPING TO ALL 50 STATES!
|
|
|
Delta 17" Drill Press Return Spring Related Parts Rockwell Milwaukee
Delta drill press quill return spring and related parts. Includes spring. Geared housing, adjusting screw, small spring, cover with depth gauge, knob and pointer. I have many parts for this drill press. Let me know what you're looking for. Browse other parts for sale at Thanks for looking.
|
|
|
DAYTON 17" MULTIPLE SPEED PEDESTAL DRILL PRESS
If you have any questions regarding this machine. Please contact Michael@ 909) 652- 1400. Make: Dayton Condition: Good Specifications: Table: Production Table Surface Area: 9-5/8" x 9-5/8" Production Table Overall Size: 12-1/4" x 12-1/4" Base Table Surface Area: 11" x 10-1/2" Spindle: Throat: 8-1/2" Swing: 17" Quill Stroke: 5" Taper: 2 Morse Taper Speeds: 240-370-390-525-600-620-1.205-1,360-1,570-1,905-2,225-3,080 RPM. Column: Diameter: 3" Length: 49" General: Motor: 3/4 Horsepower. 115/ 230 Volt, 1,725 RPM, 12.4/ 6.2 Amps, 60 Hz Electrical: 115 Volt. Single Phase Overall Dimensions: 15" x 27" x 67" tall. Comes as shown in pictures. GUARANTEE: If any machine guaranteed by us does not prove satisfactory mechanically. The Purchaser may return it freight prepaid within 14 ... moredays from date of shipment and we will refund the purchase price in full. This does not apply to machine sold“as is” or“subject to inspection” This guarantee applies only to machines which we own. The machine must be returned in the same condition that it left our warehouse. MachineStation shall not be responsible for any damage done by truckers, riggers, or other parties. Machine damaged in shipping are not covered under the return privilege. WARRANTY: Seller makes no warranties of any kind whatever. Expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement. MACHINE USE AND SAFETY: Buyer acknowledges that the goods described herein are pre- owned used goods which were neither designed or manufactured by the Seller. Nor has the Seller knowledge of, or control over, the prior use or misuse of said goods: nor does the Seller have knowledge or control over the application of these goods by the Buyer. It is the Buyer’s(user’s) responsibility to provide
|
|
|
~Nice DELTA *17" Drill Press (DP-600) ~Complete*MT-2*Spindle / Quill w/ Bearings
This is a Complete Spindle Quill with Bearings from a 17" DELTA Drill Press ~the older style: 17-600~ It's in Good Working condition! ~* ~ Let me know if: you've got any questions, or need more photos. $15 UPS shipping in US or available for pick-up in Providence. RI Thanks!
|
|
|
Rockwell Heavy Duty Drill Press; Model 17-600
Rockwell Model 17-600 Heavy Duty Drill Press Floor-stand Serial#1397172 Single Phase 110VAC Motor Original 1 HP Rockwell Motor Variable Speed#2 Morse Taper 16"x20" Tilt-table.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-149e7e231fa-0x110-
|
|
|
DELTA DRILL PRESS Model # 17-900 Heavy Duty Drill Press Excellent Condition 16.5
Delta Drill Press. Model 17-900 Used commercial floor drill press in very nice condition. Used very little. Delta well known for high quality tools. This si a 12 speed press to handle all your drilling needs. Many drill presses available but few in this condition. Do not miss out.16-1/2 Floor model press. Specs. Specifications: Capacity: 16 1/2' x 5/8" Drilling Cap. 5/8" Swing: 16 1/2" Table Size Tilting: 12" x 12" Spindle Speeds(12) 250-3.000 Rpm Spindle Quill Taper: 2 MT Spindle Quill Travel: 3 3/8" Column Diameter: 3" Weight: 200 LBS Table adjustment and locking mechanism Drill Chuck HORSEPOWER: 3/4 1 Phase
|
|
|
DELTA 17-600 DRILL PRESS 230V 3PH 1hp
Rockwell/Delta drill press 17-600. This is a 3 Phase 1hp motor. I bought it from a closed down prison and I don't have three phase power. I had another motor that was older from the same prison that check out great. So I have doubt this will work. This is as is and no returns since it is free shipping and very heavy and expensive to ship. I will answer any questions you have. If there is other numbers or specs please ask and I will check for you. I am a very honest seller with over 3000 feedbacks and 100% positive feedback. Good luck. If I have to ship to residential or you need a lift gate truck you will have to add $75.00 to the final price.
|
|
|
DELTA 17" DRILL PRESS BELT COVER DP600 HEAD
CAST# DP602 NOTE: EAR ON MOUNT WAS BRAZED- SEE PHOTOS WHOMEVER BRAZED IT DID AN EXCELLENT JOB NEEDS A CLEAN AND PAINT FOR REF SEE SKETCH
|
|
|
Delta Drill Press 17" Swing 0-.5" Jacob's Chuck
Used Delta drill press sn 3520 17" swing 0-5" Jacob's chuck 110v/220v. Single phase, 10 amp, 5 speed step pulley motor 17x30 table 4" vice. Opens to 4.125
|
|
|
Delta 16-1/2" drill press Model 17-965 Type 2 3/4hp 1720rpm phase 1 60hz
Delta 16-1/2" drill press Model 17-965 Type 2*3/4hp* 1720 rpm*phase 1*60hz*115/230 volt*10/5 amp 5/8" JT3 Chuck Pick up only
|
|
|
Quill / Spindle assembly for vintage Delta 17" Drill Press, JT nose with chuck
Quill and Spindle assembly with Jacobs chuck for a vintage Delta 17" drill press. I bought this as spare parts but now have whole spare drill presses. I have restored a couple of these and this assembly seems to me to be in serviceable condition. It could certainly benefit from cleaning and probably the bearings should be changed but that said it turns quite smoothly likely due to lots of old grease inside and and a lack of gritty dirt or other contamination. As you can see this has the Jacobs Taper spindle nose instead of the extended Morse taper that is seen on these more often. For those of us fixing these up for mainly woodworking in non industrial settings the JT nose is the more desirable. Not requiring any adapter with a normal chuck to use regular drill bits. So here you have the whole assembly from the upper part of the spindle(no ... morenut on top) to a Jacobs chuck that seems in decent condition. As seen in the photos there are some marks from some hard use or other on the end of the chuck but the jaws themselves do not seem badly worn. You can turn the chuck by hand but is somewhat stiff from general dirtiness I think. There is no damage I can see to the teeth on the outside of the quill. With this whole assembly one could keep an original quill with the Morse, if desired and change out the whole thing as described in the original manuals for these drills
|
|
|
DAYTON 3Z918F 17" Standing Drill Press 3/4 HP 2MT-5/8 Chuck 12 Speeds
574-825-4990 SKU: 59544 DAYTON 3Z918F 17" Standing Drill Press 3/4 HP 2MT-5/8 Chuck 12 Speeds. Brand: DAYTON Size: Length: 32 in. Width: 30 in. Height: 72 in. Condition: Used Country of Manufacture: China Consigner: B Items in Lot: 1 Lister: 8 MPN: 3Z918F Weight(lbs. Oz) 263.0 Floor Drill Press. Belt Drive. 115/230V. 12 Speeds. 2 MT Spindle Taper. 5/8" Chuck w/Key. 3/4 HP. 9-5/8X9-5/8 work Table. 64-1/2" over all Height. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business ... moreis important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shi
|
|
|
DELTA ROCKWELL 17" DRILL PRESS Upper Guard Assembly
DELTA ROCKWELL 17" DRILL PRESS Upper Guard Assembly. As Pictured. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14ac2cda479-0x10b-
|
|
|
DELTA ROCKWELL 17" DRILL PRESS Lower Guard Assembly
DELTA ROCKWELL 17" DRILL PRESS Lower Guard Assembly. As Pictured. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14ac8da1ff4-0x10f-
|
|
|
DELTA ROCKWELL 17" DRILL PRESS 3-1/2" COLUMN COLLAR
DELTA ROCKWELL 17" DRILL PRESS 3-1/2" COLUMN COLLAR. As Pictured.
|
|
 |