|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: China High Accuracy Test fast, convenient, non-destructive. As accurate as desk tester, error less than 1.5HRC. Test head: 120°diamond indenter. Total test ... moreForce: 60 kgf, 100 kgf, 150 kgf.
Buy It Now
Condition: Used Location: Valencia, United States Reconditioned Delta/ Rockwell 10" Tablesaw(RM# 806) 3HP; 1PH; 230 Volt Reconditioned. Repainted, Re-wired New Bearings in Arbor Set of 3 New Belts ... more5" Uni-Fence or 52" Biesmeyer your choice! PLEASE CALL KEVIN 239-947-0348 OR 239-250-1528
Condition: Used Location: Lansing, United States Superior Machine & Tool, Inc. 1301 Sunset Avenue | Lansing, MI 48917.
$6.05 Shipping Condition: Used Location: Sutton, United States Five Wilson Rockwell Brale Hardness Testers, lot includes: 364706, 2428466, 1342-IT, 4432549 & 404031, they look to be in good used condition. see photos.
Buy It Now
$99.99 Shipping Condition: Used Location: Lombard, United States Used condition with dings dents and scratches to the base. Some surface rust spots. Missing ID tag. Please see photos for details. Thanks for looking ... moreShipping price to the lower 48 only
$21.90 Shipping Condition: Used Location: Holliston, United States Mixed lot of new and used shaper cutters carbide tipped. Rockwell shaper to 1/4” router bit adapter.
Buy It Now
$4.19 Shipping Condition: New Location: Concord, United States IT IS PRINTED ON THE SPECIAL ALUMINIM SHEET. SEE THE PICTURES TO VERIFY WHICH ORIGINAL PLATE IT'S REPLACING. THERE ARE DIFFERENT THREADING CHARTS ON A ... moreROCKWELL 11 LATHE WERE USED.
$13.60 Shipping Condition: Used Location: Sutton, United States
Buy It Now
$14.13 Shipping Condition: Used Location: Millstadt, United States Condition - Good used condition. The repair was done very well. Can only be seen inside the jaw. Ensure the item will fit your needs. Approximate Weight ... more- 15 lbs. Forklift loading isFREE. Height - 7".
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States PLEASE LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I WOULD DO MY BEST TO ANSWER ANY QUESTIONS FREE ... moreSHIPPING TO THE LOWER 48 USPS FLAT RATE SHIPPING
Buy It Now
Condition: Used Location: San Bernardino, United States NICE SAW
Buy It Now
$400.00 Shipping Condition: Used Location: Bristol, United States WORKING WITH TOOLING.
Buy It Now
$22.95 Shipping Condition: Used Location: Kearneysville, United States HUGE LOT Delta Rockwell Shaper Cutters, Spindles & Collars 41 SHAPERS MORE! Come as pictured. Please view pics for best description and condition. Box ... morenumbers may not match content. Zoom in on pictured. Many unique cutters, shapers etc.
Buy It Now
$7.90 Shipping Condition: Used Location: Bonsall, United States We make no money.
Buy It Now
$39.99 Shipping Condition: Used Location: Waterford, United States USED, DELTA ROCKWELL OUTBOARD LATHE TURNING STAND STAND BASE. THE TOP FITTING THAT HOLDS THE TOOL REST IS MISSING. LOOK AT THE PICTURES.
Buy It Now
$91.79 Shipping Condition: Used Location: North Ridgeville, United States shaper from woodworkers estate send offer
Buy It Now
Free Shipping Condition: New – Open box Location: Oakland, United States This listing is for one complete bearing, cup and cone assembly. The two parts are precision matched as a set, and are not interchangeable with other ... morebearing parts. This is the headstock spindle nose bearing and the spindle requires two of these complete bearing assemblies mounted back to back with spacers. Precision grade 0, equivalent to ABEC 7 grade or class 7 precision. Factory timken bearing supplied by Rockwell circa 1981.
Buy It Now
$150.00 Shipping Condition: Used Location: Edison, United States Pedestal / Stand.
Buy It Now
$25.00 Shipping Condition: Used Location: El Cajon, United States Includes the accessories and near full can of original Dumore oil (label on the can is loose, but solid). Box is rock solid with minor wear, no dents ... moreand a working latch. Dumore logo on the face is in excellent condition.
Buy It Now
$88.44 Shipping Condition: Used Location: Dammeron Valley, United States This was used by my husband. It is 20 plus years old. It appears to be electric and has looks like it has an alternate power source.
Buy It Now
$182.88 Shipping Condition: Used Location: Evans, United States Frank Bacon Machinery Sales Company. Inc. 4433 East Eight Mile Road· Warren. MI 48090-0886· 586) 756-4280· Fax(586) 756-8009· Toll ... moreFree(800) 394-4280 e-mail: sales@frankbacon.com On The Web: www.frankbacon.com Please Call Us With Any Questions Wilson Rockwell Hardness Tester for Standard and Superficial Scales Stock# 11254-02 Model: 3TT Serial Number: 3066-882 Specifications: Vertical Capacity: 8" Throat Depth: 5.25" Load Selection(Kgs) 15. 30, 45, 60, 100, 150 Equipped With: 1/ 16" Carbide Ball Penetrator Dust Cover Four(4) Anvils: Plane Flat. Raised Flat, Raised Shallow V, Standard V One(1) Each: B" C" N" T" Scale Test Blocks Dead Weights: 15. 15, 15, 15, 40, 50 Kgs Optional Accessories(at additional cost) Certified"C" Scale Diamond Indentor Certified"N" Scale Diamond Indentor Certified to ASTM Specifications GUARANTEE: Unless otherwise specified. Every machine is offered with the standard MDNA(Machinery Dealers National Association) return privilege to ensure your complete satisfaction. If the machine is un-satisfactory it may be returned to our warehouse. Freight prepaid and in the original condition within 30 Days of shipment for a full refund less the cost of Specialized equipment. New items and re- certification costs, When applicable.
Buy It Now
Free Shipping Condition: Used Location: San Ramon, United States Vintage 6” RISER KIT DELTA ROCKWELL 14" BANDSAW W/ 15/16" DIAMETER ROUND POST in nice shape as shown. All original parts. Ready to use. Wood blade guard. ... moreFree shipping to all 50 States!!! Thanks, Steve
$75.00 Shipping Condition: Used Location: Gardena, United States Up for sale is a Rockwell 727 G1 Electric Rust Chipper Tool 115V AC/DC 7 Amp 2000 RPM.
Buy It Now
Free Shipping Condition: New Location: Holly, United States A08514 or 904166 Delta & Rockwell variable speed motor pulley (both halves).
Buy It Now
Free Shipping Condition: New Location: Nixa, United States As you can see from the contents, this is a very detailed manual that covers everything you would want to know about this machine. This manual is for ... morethe newer version of the 14″. The other 14″ lathe manual is listed here.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States 1x LTA-516.
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States USED, TILT TABLE CASTING. NO CRACKS OR REPAIRS.
Buy It Now
Condition: Used Location: Dalton, United States Swing: 14". Fully Functional! Complete w/ NEW Toshiba Motor! It is imperative that you provide all pieces of information! Local pickup is available as ... morewell. Can you believe our price?.
Buy It Now
Condition: For parts or not working Location: Spring Grove, United States Here’s a Wilson Rockwell 3 TT BB Twin Hardness Tester in need of repair The end of the“Lever Arm” that lifts the weight stack pedestal is broken(see pics.Could ... moreprobably be TIG welded) The dial has very nice movement when actuated manually with the little“T” bar that hooks to the tester actuator mechanism Unit is missing weights(I was able to buy“generic” weights for my own tester some years back as they were also missing) Unit does not include indenter/penetrator(ebay $40 used) Unit does not include anvil/stage(we made several of our own over the years to fit specific requirements) All 3 leveling feet are intact! I don’t know if anything else is wrong– stated above is what I observed· Wilson Rockwell Instron; Norwood. MA· Mod. No. 3 TT BB· Tester No. 606· O/A Dimensions: 8.5”W.x 19.5”D.x 28.5”H. Net Weight: 135 lbs. as pictured) Compare at over $4000 to buy same unit REFURBISHED… Free Loading For Buyer Pick Up! PREFERRED) OR $39 for packing tester somehow securely yet carefully on approx. 36”x 36” pallet at approx. 180 lbs. for pick-up by buyer’s common carrier from zip 44440 We do not arrange for common carrier shipping directly. I refer buyers to“Felix”ext.213) at Small Business Transport(888) 368-6022 or“Kam” ext. 727) at Freight Guru(877) 937-3734 for competitive motor freight rates. Give them our listed pallet size& weight(from our ad) your zip& our(44440) zip code and they can advise their best deal. Many Thanks, Lloyd If you have any questions or want more pictures or information please call us at(330) 652-7535.
Buy It Now
Condition: Used Location: Simpsonville, United States NEWAGE INDUSTRIES VERSITRON ROCKWELL HARDNESS TESTING SYSTEM*PLEASE VIEW PICTURES CAREFULLY- SOLD AS IS* OLD STOCK* PLEASE READ BEFORE BIDDING. MAKING ... moreAN OFFER, OR PURCHASING Please note this item is"AS IS" with NO WARRANTY OR GUARANTEE STATED NOR IMPLIED. Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING. All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charges to shipping. Approximate weight: 156 lbs. PLEASE CONTACT US FOR A FREIGHT QUOTE. Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities RAB/ 7675/SKID#361/ 1) E
Buy It Now
$7.90 Shipping Condition: Used Location: Bonsall, United States Love the spirit of his tools good vibes. We make no money.
Buy It Now
$7.90 Shipping Condition: Used Location: Bonsall, United States We make no money.
Buy It Now
Condition: New Location: Madison Heights, United States ROCKWELL TYPE HARDNESS TESTER. ROCKWELL A TEST BLOCK (1PC). ROCKWELL B TEST BLOCK (2PC). ROCKWELL C TEST BLOCK (3PC), SCREW DRIVERS (2PC). MAXIMUM LOAD(KGF)………………………….150. ... moreLOAD RANGE(KGF)……………………………….60, 100, 150.
Buy It Now
Condition: Used Location: Brookpark, United States Instruction Manual for Rockwell JR JS Hardness Tester Includes information on: anvils. Assembling instructions, dash pot, dial gage, elevating screw, ... moreindex lever adjustment, and more. Please view the above images for more information. Manual is a total of 33 pages. Covers models: JR JS. Your order will come with a full bound. High quality copy of the manual for easy reading. All orders qualify for FREE first class mail shipping within the United States! Most of the time orders are shipped out the same day they are received.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States
Buy It Now
$28.27 Shipping Condition: Used Location: Waterford, United States USED, CAST BELT GUARD FOR THE SLO SPEED (BIG PULLEY) DELTA 14" DRILL PRESS WITH THE DP220 HEAD CASTING. THE MOUNT BRACKET HAS A CHIP OUT OF IT. IT STILL ... moreHOLDS ONTO THE FRONT PULLEY COVER. THERE ARE NO CRACKS OR REPAIRS ON THE BELT COVER SECTION.
Buy It Now
Condition: Used Location: Mc Kees Rocks, United States This tester is in used condition. Sold as shown, check pics for details. This was tested this past fall too and it worked back then as well.
Buy It Now
$69.95 Shipping Condition: Used Location: Berlin, United States AS SHOWN
Buy It Now
Free Shipping Condition: Used Location: South Korea As SEMI-GTECH Co.Ltd is not an Authorized Distributor of the products, manufacturers' warranties do not apply. All listed logos, trademarks or service ... moremarks are property of their respective owners. We are NOT Authorized Distributor of this item, Manufacturer's Warranty and Support DO NOT apply.
Buy It Now
$39.00 Shipping Condition: New Location: Seattle, United States CMX1000 Portable Hand Held Hardness Tester. Special PRICE! NEW JULY 2023. Per ASTM standards, parts that are 10lbs or heavier AND 1" wall or greater are ... moreideal for these type of testers. This applies to ALL Leeb type testers from any manufacturer.
Buy It Now
$8.00 Shipping Condition: Used Location: Greenville, United States
Buy It Now
Free Shipping Condition: Used Location: Sturgis, United States Very good used condition with scratches and marks. Overall good. Free shipping with vintage Tool. Exactly as shown in pictures.
Buy It Now
$58.56 Shipping Condition: Seller refurbished Location: New Port Richey, United States
Buy It Now
$300.00 Shipping Condition: Used Location: Bristol, United States Shipping is just an estimate, so contact me first and quote if interested. It will be shipped on a pallet by truck via freight. Local pickup is always ... morewelcomed. Check out my other listings as well. Thank you for looking
Buy It Now
Free Shipping Condition: New – Open box Location: Goddard, United States Rockwell Delta VS6 15" Variable Speed Drill Press Operating& Parts List Manual For models: 15" VS6 Models beginning with serial No. 139-3001 ... moreDescription: This is a Operators and Parts List manual for the Rockwell 15" VS6 Variable Speed Drill Press. It has sections on: Operation. Adjustments, Lubrication, Exploded Parts Diagrams, Parts List. It has 12 pages. To inspect the quality of the manual, and to view select pages, please click on the gallery images above to enlarge. Includes sections on: Motor Recommendations Variable Speed Control Quill Adjustments Changing Spindle Adapters Exploded Parts Views Parts Lists Number of pages: Approx 12 Condition of original: Very Good Publication date: Jun. 1969 Publication No. PM 402-04-651-5009 Added Notes: Due to others making copies of these manuals for resale. I have lightly watermarked select pages to discourage this practice. About This Manual: This is a high quality reproduction manual which has been scanned with a high resolution scanner. Each page is then digitally edited in Photoshop to remove grease marks. Fingerprints, writing, and other imperfections that the original manual may have had. It is then printed on 24 lb heavy paper and 65 lb cardstock for the covers with a 600 DPI LaserJet printer. The result is a clean and durable manual which many times is better than the original and should last many years in your shop. Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. Sales tax charged for Kansas sales. See my for more manuals. Be sure to add me to your!
Buy It Now
$189.95 Shipping Condition: Used Location: Wolcottville, United States Tested and works as it should. About 17" of travel .
Buy It Now
$15.35 Shipping Condition: Used Location: North Bend, United States Delta /Rockwell light duty shaper complete spindle cartridge.Good bearings.1/2” spindle with nut and 3/4” plastic reducers.See images for gnarling on ... moretop of the spindle. The threads are fine.See images for cosmetic flaws, stains, rust etc.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States 240V 1-Phase 3HP. No separate break circuit is required.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States Right tilt saws have left hand threaded arbors while left tilt saws have right. -New Arbor. -New Arbor Nut.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States Nut is machined with an extra wide shoulder to compensate for loose or worn threads.
Buy It Now
Free Shipping Condition: New – Open box Location: Goddard, United States It has 24 pages. Rockwell 10" Contractors Table Saw Model 34-348. Type of Manual: Operator and Parts List. About this manual : This is a high quality ... morereproduction manual which has been scanned with a high resolution scanner.
Buy It Now
$9.00 Shipping Condition: Used Location: Unionville, United States WILSON"ROCKWELL" TEST BLOCK CALIBRATION SET HARDNESS BLOCKS: 67 I00632(SQUARE) 67- 0-1287(ROUND) COMES WITH CASE. AS PICTURED, SELLING AS IS. ... morePLEASE ASK ANY QUESTIONS BEFORE BIDDING. WINNING BIDDER MUST CONTACT US WITHIN 3 DAYS OF AUCTION CLOSING. PAYMENT IS EXPECTED WITHIN 7 DAYS. Pictures are of the actual item. No accessories or manuals included unless otherwise pictured. All items are sold-as-is. We are surplus equipment dealers and do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best we can. TOOLS ARE SOLD AS IS. ALL OUR TOOLS ARE SURPLUS ITEMS THAT WE PURCHASE FROM AUCTIONS THAT INCLUDE AEROSPACE. AVIATION, AIRCRAFT, AND AUTOMOTIVE TOOLS. SOME MAY HAVE MINOR SURFACE RUST, AS WELL AS MECHANICS NAMES OR MECHANICS NAMES MAY BE SCRAPED OFF. WE SHIP WORLDWIDE! Check out my other items
Buy It Now
Free Shipping Condition: New Location: Nixa, United States I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. ... moreI believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find.
Buy It Now
$129.99 Shipping Condition: Used Location: Ashby, United States Nice Delta Rockwell CAST IRON and steel PEDESTAL STAND FOR buffer . Shipping lower 48 states
Buy It Now
$8.95 Shipping Condition: New Location: Camby, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Goddard, United States Rockwell Delta 15" Utility Drill Press. The manual has about16 pages. About this manual : This is a high quality reproduction manual which has been scanned ... morewith a high resolution scanner. Type of Manual : Instruction & Parts Lists.
Buy It Now
$9.51 Shipping Condition: Used Location: Waterford, United States DESCRIPTION: USED. DELTA ROCKWELL SAFETY COLLAR. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. ... moreI WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINTAGE TOOL
Buy It Now
$3.97 Shipping Condition: Used Location: Addison, United States Rockwell-Delta 31-700 Belt Disc Finishing. Machine Instruction Maintenance Manual.
Buy It Now
$7.90 Shipping Condition: Used Location: Bonsall, United States We make no money.
Buy It Now
Condition: Used Location: Middlebury, United States Prefer to pick it up yourself?. 3" Hole ID. Size: Length: 38 in. Width: 29 in. Height: 10 in. Will there be a dock or forklift. Unless otherwise specifically ... moreagreed to in writing by. To get a freight quote we will need to know the following.
|
|
|
|
Rockwell 17-600 Vari-Speed Floor Standing Drill Press 1HP/230-460VAC/3Ph
The Auction Store Item Description: This is a Rockwell model 17-600 Vari-Speed floor standing drill press. It has a 1HP/3Phase/230-460VAC Rockwell electric motor. It is assumed to be wired for 230VAC. This drill press was removed from service and placed in storage pending auction sale. Additional Details: Overall Dimensions: 21"W x 34"D x 68"H Electrical Input Required: 230-460VAC/3Phase Motor: 1HP Rockwell 86-044 Variable speed model. SN: 1809997 Condition: This item could not be tested to confirm operating status. It was hard wired when in service. It is assumed to be restoration worthy. But must be listed as"non operational or for parts only" Service& parts are assumed to be necessary in order to return this drillpress to full operating condition. Rust is present on this item. Please bid accordingly. Pickup ... moreLogistics: Pickups for this item and others listed for this client will be on Wednesday. April 24th from 9:00am to 2:30pm by appointment. Winning bidders will be given pickup information to the location once payment has been made and have confirmed a time that they would like to pick up their item. This item is located in a warehouse at a district elementary school site. And all activity at this site will be monitored. On site assistance. Loading docks and forklifts, may not be available at this location. Winning bidder will be responsible for providing any and all equipment. Tools, appropriately sized vehicle, and personnel necessary to safely load and remove this item. In some situations. At the sole discretion of our clients, a buyer may be denied access to their item if they are unprepared to remove the item safely from its location. Prior to any pickup appointment. We are happy to discuss the arrangements that should be made by the winning bidder in order to avoid any inconvenience at pickup. Please contact us before bidding if you have any questions or concerns. Policies Notice To Winning Bidder: The Auction Store will send you an invoice within 24 hours of the end of auct
|
|
|
Rockwell DP220 Drill Press
Rockwell DP220 Drill Press Thanks for looking at this Rockwell DP220 Drill Press Buy it Now or Best Offer. This item is used with some wear. The motor is working. For some reason the drill press will not go down all the way. It may need to be cleaned or have some other problem. If you want this item. Talk to me. No reasonable offer will be refused. Shipping $135.00 to the contiguous USA. If you have any question about this mower. Please call my business line at 214-295-4511. You can also call or text my cell at 325-513-5867. No International Shipping on this item. Please read below for shipping information. About the Shipping… Your package may be shipped UPS. Priority Mail, Parcel Post, or other method depending on the cost to ship and the amount of shipping paid. Every effort will be made to offer the fastest and best delivery method versus ... morecost. You may have to pick some large items up at the post office if shipped by USPS. A large item will not be shipped USPS Parcel. If UPS will ship it reasonably. Exceptionally large items may be sent by Greyhound or similar carrier and will be noted in the listing. Parcel Post can in some rare instances. Take up to 9 business days to deliver from the shipping acknowledgement by the US Post Office on USA Destinations. If you buy multiple items. The shipping will be combined with a discount that hopefully will be agreeable with you. We can work that out when it happens. Please email me if you require special shipping. Please allow two business days to ship for items twenty five pounds and under. Three to four business days may be required to ship items over twenty five pounds or larger items. All shipping on this account includes a tracking number. Other… Almost every item that is sold under this account is used and will have some amount of wear from not being new. Payment: I only accept PayPal with the exception of Local Pickup Items for which I will accept cash or PayPal at your discretion. Payment must be made within three days of auctions end or Buy it Now purchase. A
|
|
|
Rockwell Delta Wood Working Drill 3 Phase 230/460 Volt
Rockwell Delta Wood working Drill*This item is used. But it is in good working condition. It was up and in operation at time of take-out. Though most drills can be used for either steel or wood, this is best suited for wood because it is only a single speed. Shipping will be determined by weight and location of buyer. We use either FedEx Freight or UPS depending on size and cheapest method of shipment. Please ignore eBay shipping details. If you need a shipping quote please contact us. eBay quotes do not reflect our discounts. And we pass all savings to our customers. ~Series No. 15-665 ~Serial No. 1498979 ~Voltage: 230/460 V. 3 Phase, 1/2 HP
|
|
|
Rockwell Drill Head, Cat #15-665, J33 Taper
Selling a used Rockwell 6-speed drill head with a J33 Taper. Note: This is for the head unit only. No table included. Cat/Model#15-665 SN: 1438172 I have(3) of these total. Please specify which you would like in a message to me. 1) with a multi-drill connector(1) with a tapered chuck(1) with no chuck I also have the multi-drill chuck for the drill head with the connector. I will add this at a negotiated price if it is desired. Please let me know if you have any questions or require more specs. Sold as is. Where is. All sales are final.
|
|
|
ROCKWELL-DELTA 20" 70-200 DRILL PRESS 1HP 115/230V 1720RPM
BT# 11721 B06A2-075.3Y You are looking for: ROCKWELL-DELTA 20" 70-200 DRILL PRESS 1HP 115/230V 1720RPM USED ITEM. FULLY TESTED! IN GOOD CONDITIONS. 15 DAYS WARRANTY! Manufactured by: ROCKWELL. DELTA MACHINARY. Additional info: DRILL PRESS 20 INCH. Model: 70-200 Power: 1 Hp Voltage: 115/230 V Amp: 15/7.5 PH: 1 Hz: 60 RPM: 1720 With ONLY ONE lever! Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
|
|
|
Rockwell mortise tool for drill press - #3909 DPI
Used Rockwell mortise tool for drill press- 3909 DPI. Very rusted. And will need thorough cleaning. 1 knob is missing and needs replacing. As bought. $17.50 shipping to 48 states. Thank you for viewing.
|
|
|
ROCKWELL DELTA 16.5" 17-965 DRILL PRESS 3/4HP 115/230V 1720RPM 16-1/2"
BT# 11727 B06A2-075.3Y You are looking for: ROCKWELL DELTA 16.5" 17-965 DRILL PRESS 3/4HP 115/230V 1720RPM 16-1/2" USED ITEM. FULLY TESTED! IN GOOD CONDITIONS. 15 DAYS WARRANTY! Manufactured by: ROCKWELL. DELTA MACHINARY. Additional info: DRILL PRESS 16.5 INCH. Model: 17-965 Serial No. 016741W2061 Power: 3/4 HP Voltage: 115/230 V Amp: 10/5 PH: 1 Hz: 60 RPM: 1720 Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e0f713684-0xfc-
|
|
|
Rockwell EFI-2P Heavy Duty Geared Head Drill Press w/ Power Down Feed
Rockwell EFI-2P Heavy Duty Geared Head Drill Press Model EFI-2P. S# 43776-40, Series No. 70-121, 11.75" x 15.25" Table, Capacity: 1 3/8" Steel- 1.5" Cast Iron, Manual Adj. head& table with quick lock downs, Center of spindle to column 12 3/16" Dial in spindle speeds from 90 to 3,360 rpm, Power down feed, 5.5" Estimated quill stroke, Column Dia. 5.5" Base to drill 51 9/16" Table to quill 28" Bijur one shot lube system, 1.3/1.9hp 460v 3ph 60hz(wired 460v) Overall Dim. 20"W x 32"FB x 6'H, Est. Wt. 835 lbs. Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: ... moreWe offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
Rockwell 15-665 Drill Press
Rockwell 15-665 Drill Press Seller is selling the assets set forth on an“as is. Where is” basis and seller disclaims all warranties, representations and guarantees whether expressed or implied. Seller makes no representation or warranty as to the operability. Merchantability or fitness for any particular purpose. Loading. Shipping, and special handling(palletizing or crating) will be an additional cost. If payment is not received within 10 days of sale. We reserve the right to resell the item. Purchased items that are not shipped or picked up within 14 days of sale date are subject to a monthly storage charge of $1.00/sq. ft. min $75.00/mos) All sales are final. No return will be accepted unless the item is not as described. Sales made to California buyers will have sales tax added unless a valid tax resale number is provided.
|
|
|
ROCKWELL Delta 15" Drill Press Manual & Wiring Diagrams 1966-67 in Envelope
ROCKWELL MANUFACTURING COMPANY publications PM-402-04-651-5008 dated 1966 and PM-402-04-655-5018 dated 1967 instructions for Rockwell-Delta 6 Plus 6-15" Drill Press(beginning with serial#139-3001) and Electrical Wiring Diagrams For Rockwell-Delta Factory Wired 15" Drill Presses each measuring 11" x 8 1/2" have 8 and 12 pages. B+w photos and diagrams. They are in the original envelope and include a page of safety instructions. Light soiling and smudging to reverses; light extremity wear and soiling to envelope; otherwise solid and clean. Thank you.
|
|
|
17" DELTA ROCKWELL 17-600 BENCH TABLE MOUNT 6-SPEED 3PH DRILL PRESS 1HP 3PH 1140
17" DELTA ROCKWELL 17-600 BENCH TABLE MOUNT 6-SPEED 3PH DRILL PRESS 1HP 3PH 1140. DELTA ROCKWELL#17-600 17" DRILL PRESS BENCH/TABLE MOUNTED USA Made This listing is for 1 used drill press head and column assembly that appears to be in good general overall condition with some normal cosmetic wear. As seen. Rockwell motor is 1HP, 3PH, 230/460V, 60Hz, 3.8/1.9A, 1140RPM. Variable speed: six spindle speeds. Exact speeds are unknown and have not been confirmed. But similar Rockwell models with identical motor RPM(1140RPM) like#15-665, have the following speeds- 3635, 2575, 1355, 725, 395, 280. Includes motor starter and 3-wire lead. Drill head is adjustable 6-1/2" vertically. Drill chuck and the spindle pull handles are NOT included. This machine has a 17" swing. Entire drill press stands about 39" tall overall. This can ... morebe bench or table mounted. We had purchased 3 drill heads in slightly different styles and specifications as this was part of a gang drill set up. Although there are no obvious signs of any known or potential problems that we are aware of. We do not have the means to test it properly, nor do we know anything about its previous history as this was purchased at auction in a large bulk lot form, and so it must be sold as is. Inspections are always welcome and recommended on all used equipment during our business hours with some advance notice. Don't miss your chance to own this professional industrial piece of equipment now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. Due to size and shipping cost. It is expensive and impractical to ship, so we would prefer a local pickup here in Rhode Island. Local sales tax must be charged on local pickups. Inspections are welcome and always recommended before purchasing during normal business hours with advance notice, as this is sold as is. This can also be shipped if the buyer chooses and makes all the necessary arrangemen
|
|
|
Rockwell Drill Press Series 15-017
Used Rockwell 15-017 drill press. Series 15-017. S/N 1489015, 1/2 hp, 1725 rpm, 115V, 3/8-24 threaded mount. No key and drill chuck should be replaced, other then that it's a nice drill press. Could be picked up or contact us for a shipping quote. $25.00 skid fee. Cart not included. NOTE: ALL MACHINERY IS SOLD AS IS. WHERE IS WITH NO WARRANTY OR GUARANTEE. ALL MACHINE SAFEGUARDING AND OSHA REQUIREMENTS ARE THE RESPONSIBILITY OF THE BUYER. WE DO NOT MODIFY OR ALTER ANY MERCHANDISE THAT WE BUY OR SELL. IF BUYER RESIDES IN PA 6% SALES TAX IS CHARGED UNLESS TAX EXEMPT. WE DO NOT MODIFY OR ALTER ANY MERCHANDISE THAT WE BUY OR SELL. IF BUYER RESIDES IN PA 6% SALES TAX IS CHARGED UNLESS TAX EXEMPT. ALL BUYER(IN AND OUT-OF STATE) PICKING UP ITEM(S) MUST PAY STATE SALES TAX(STATE LAW) INTERNATIONAL SHIPPING IS AVAILABLE FOR SOME AREAS. PLEASE ... moreCONTACT US FOR SHIPPING COST. IMPORT DUTIES. TAXES, ETC ARE THE RESPONSIBILITY OF THE BUYER. ITEM LOCATION: VALLEY VIEW. PA 17983(SCHUYLKILL COUNTY)
|
|
|
DELTA ROCKWELL 17 INCH DRILL PRESS TABLE RAISING UNIT
Up for Sale is a Delta Rockwell 17 inch drill press table raising unit. Item is missing crank up down handle. The rack has been modified and is not completely original(see pictures) Looks like modification is better than original loop piece that was replaced. Gears are all good and usable. The hardware is all there one screw looks like a replacement and not original also. DP 660 Casting number. Fits 3 1/2" column. This item is in good usable condition. These parts fit the following drill presses and most likely a few others. 17" 1370, 17-205, 17-206, 17-207, 17-208, 17-210, 17-211, 17-212, 17-213. This is the old style DP-600 Z head casting. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part ... moretime seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a fina
|
|
|
VERY NICE ROCKWELL DELTA 20" DRILL PRESS MODEL 70-6X0 3 PHASE 208-230/460 VOLTS
SquareTrade © AP6.0 VERY NICE ROCKWELL DELTA 20" DRILL PRESS MODEL 70-6X0 3 PHASE 208-230/460 VOLTS Prev Stop Play Next You are bidding on a Rockwell Delta 20" Drill Press. Model: 70-6X0. T his is a very nice unit in great condition and it is fully guaranteed. 20" Capacity Adjustable Table 3 Phase. 208-230/460 Volts We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery. Any questions? Email us NO RESERVE Please click here to see my other auctions.
|
|
|
15" DELTA ROCKWELL 15-665 BENCH TABLE MOUNT 6 SPEED DRILL PRESS BALDOR 3PH 1140
15" DELTA ROCKWELL 15-665 BENCH TABLE MOUNT 6 SPEED DRILL PRESS BALDOR 3PH 1140. DELTA ROCKWELL#15-665 15" DRILL PRESS BENCH/ TABLE MOUNT Industrial/ Commercial Baldor Motor Jacobs chuck# 3B 5/8-16 with 1/8" 5/8" capacity Made In USA This listing is for 1 used drill press head with column assembly that appears to be in good general overall condition with some normal cosmetic wear. As seen. Newer replaced Baldor electric motor is 1/2HP, 3 Phase, 208-230/460V, 60Hz, 2.5-2.4/1.2A, 1140RPM. Variable speed: six spindle speeds; 3635, 2575, 1355, 725, 395, 280. Includes motor starter and electric junction box. Drill head is adjustable 6-1/2" vertically. Jacobs chuck#3B 5/8-16 with 1/8" to 5/8" capacity. This machine has a 15" swing. Entire drill press stands about 42" tall overall. This has a quick release ... moreturn knob for motor belt tensions, making adjustments very quickly without tools. This can be bench or table mounted. The spindle handles are missing on this. Originally we had purchased a few drill heads in slightly different styles and specifications as this was part of a bench gang drill press set up. Although there are no obvious signs of any known problems or potential problems that we are aware of. We do not have the means to test it properly, nor do we know anything about its previous history as this was purchased at auction in a lot form, and so this must be sold in as is condition. Inspections are always welcome and recommended on all used equipment during our normal business hours prior to any purchasing. Don't miss your chance to own this professional industrial piece of equipment now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. We also have another similar one of these being the same model. It is missing the column post asm. as w we had sold it. Sold separately and great for a backup or spare. If interested please inquire. Thank you. Due to size and shi
|
|
|
Powermatic 1150 / 1150A Drill Press Part - BODY CAST / HEAD - Rockwell Delta
Powermatic Model 1150/ 1150A Drill Press Part. All parts are in GREAT MECHANICAL working condition and are in VERY GOOD Shape! I Have MULTIPLE Drills i am parting out and have LOTS of EACH part!
|
|
|
ALL ORIGINAL VINTAGE DELTA MILWAUKEE ROCKWELL FLOOR MODEL DRILL PRESS
Great condition. Has original paint and parts right down to the light. Nothing has been added or removed. There is no plug for the light because it was wired direct. Includes Jacobs chuck and chuck key. The table has 3 small divots, no holes from drilling. The only thing it could use is a new belt down the road. The motor is a Delta 1/3 hp. 1725 rpm, 110v, 1 ph
|
|
|
Delta 20" Rockwell 1.5HP Bench Top Industrial power feed drill press 70-6X0
17" Rockwell Industrial power feed drill press. Model 70-6X0 S/N 1635914 GENERAL SPECIFICATIONS Table Type Hand Feed Throat Depth, Drills To Center Of.20" Spindle Speeds, Belt Change. Rockwell Drill Press, 20" Swing, 1.5 HP Motor, 230/460, 3ph, Amps 4.6/2.3, 1735 RPM Comes with Jacobs Chuck Need more Info? email me ross1@charter.net
|
|
|
Rockwell Drill Press Depth Gauge
Delta Milwaukee-Rockwell 14" Drill Press Depth Stop Rod. Excellent shape.
|
|
|
Refurbished Vintage 1940 Delta Rockwell 17" Drill Press
For sale is a refurbished 1940 Delta 17" drill press. Catalog number 1382 or the later m odel number 17-210. The drill press has a single phase. 3/4 HP Delta Repulsion-Induction motor and is wired to run from a standard 120 volt wall plug. The motor is from 1941 to 1944 and most of the data on the steel motor tag is gone. The drill press has been completely disassembled. Sand blasted, and refinished. All bearings in the motor and drill press have been replaced. The drill press has 0.002" run-out as measured on a bare arbor and the Jacobs 6A chuck has 0.004" run-out as measured on a pin 1.5" down from the chuck. This is the slow speed model with 5 speeds of 385. 600, 935, 1450 and 2240 RPM. The production table has a few hits from drill bits and some thru holes. This is a nice drill press and you won't be disappointed. ... morePS the cart is not included with the drill press.
|
|
|
Delta Rockwell DP 220 #974 mortising spindle 14 1/4" long
DP220#974 14 1/4" long mortiser 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13ebbf601df-0xf5-
|
|
|
Delta Rockwell DP 220 #974 mortising spindle 16 1/4" long
DP220#974 16 1/4" long mortiser
|
|
|
Rockwell 15-017 Drill Press pick up in calif pu
Rockwell 15-017 Drill Press pick up in calif pu Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 413 W# pick up in fountain valley california 92646 Here is a used older Rockwell 15-017 Drill Press. This is a bench model and has in the garage for some time. Enlarge the photos for inspection and general idea of what you are getting. pick up in fountain valley california 92646 The photographs in this listing show everything which is included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance ... moreand tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction. We accept payment via Paypal only. In accordance with ebay regulations. Payment is expected within 3 days. EBAY forwards all sales information. Therefore, California State Sales Taxes are collected and forwarded to the state of California; the rate is 8 75% DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.co
|
|
|
Rockwell Radial Arm Drill Press - With Owner's Manual
32 inch drill press. Excellent condition. With vise. Drills odd angles. Posted with
|
|
|
Rockwell Drill Press Bank (4)
I am selling a used bank of 4 Rockwell drill presses. Three of the four are in working condition. But the fourth is not. They might be used, but the quality is there! Take a look at the pictures and feel free to ask questions. 208-220/440v 3 phase but you could always change the motors if needed. All shipping and handeling must be paid by the buyer. I can arrange a truck for you. There may a charge to get the unit ready for freight pick up. But I will only charge what it actually costs me to get it ready to ship. Local pick up is always welcome. We have a forklift and can assist with loading onto a trailer. Item is being sold in as is condition. No warranty
|
|
|
Delta Rockwell 15-650 Drill Press Pulley Cover
Pulley cover off of a Rockwell Delta 15-650. Shipping to lower 48 US States only. Paypal only. Shipping will be USPS Priority Mail Flat Rate. I am not an expert on drill presses but please ask any questions and I'll try my best to answer them. Thank you.
|
|
|
Delta / Rockwell 17-430 - 17" Drill Press + NO RESERVE!
Manufacturer: Delta/ Rockwell Model: 17-430 17" Drill Press Drill Chuck Included! Serial: 83A77029 Condition: We do not know the working condition of this machine. This machine is being sold for a school. It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME OF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th ... moreAND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. This is a drill offered by Delta/ Rockwell. Perfect for the home or office. Swing(in) 17 Drilling Capacity(in) 5/8 Chuck Size(in) 1/2 Table Size(in) 11" x 14" best guess) Electrical: 115 Volt 60 Hz 1 PH Dimensions: best guess) Length: 25" Width: 22" Height: 75" Weight: 400 lbs*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items being sold for Highland Park Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your act
|
|
|
Delta / Rockwell 15-665 - 15" Drill Press + NO RESERVE!
Manufacturer: Delta/ Rockwell Model: 15-665 15" Drill Press Drill Chuck Included! Serial: 1455188 Condition: We do not know the working condition of this machine. This machine is being sold for a school. It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME OF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th ... moreAND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. This is a drill offered by Delta/ Rockwell. Perfect for the home or office. Swing(in) 15 Drilling Capacity(in) 5/8 Chuck Size(in) 1/2 Table Size(in) 11" x 14" best guess) Electrical: 115 Volt 60 Hz 1 PH Dimensions: best guess) Length: 25" Width: 22" Height: 75" Weight: 400 lbs*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items being sold for Highland Park Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your acti
|
|
|
DELTA ROCKWELL 17" DRILL PRESS QUILL CLAMP DP-600
Offering a quill clamp casting for a Rockwell Delta 17" Drill press This fits the 17" drills with DP-600 head casting This will not fit the later style 17" drills such as the 17-400 or 17-600 series Any questions: Or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
|
|
|
DELTA / ROCKWELL DRILL PRESS HEAD 4 BOLT MOTOR MOUNT
DELTA ROCKWELL DRILL PRESS PART MODEL# 15-000 THRU 1600. MAY BE SOME SURFACE RUST ON SOME ITEMS FROM LAYING AROUND THE SHOP NOTHING MAJOR. THIS IS A USA MACHINE NOT THE TAIWAN VERSION! NEWER STYLE WITH FOUR BOLT MOTOR MOUNT!
|
|
|
Rockwell Manufacturing 15-650 Drill Press - PICKUP ONLY
Rockwell Manufacturing 15-650 Drill Press The unit powers-on and the drill spins; the speed does also adjust. However it sounds very rough internally with some grinding sound. I'm not sure if it needs oil or something more major. Selling for parts or repair. LOCAL PICKUP ONLY Posted with
|
|
|
ROCKWELL / PORTOMAG MAGNETIC DRILL PRESS "VARIABLE SPEED" Model 77767
ROCKWELL/ PORTOMAG Magnetic Drill Press"Variable Speed" Model 77767 5/64- 1/2" Cap. Questions? call Metro Machine& Tool 732-650-0666
|
|
|
Rockwell Delta 20 In Drill Press, Model 70-400 INDUSTRIAL
Drill Press Rockwell Mfg 1HP 3 Phase- Commercial shop Drill Press-Rockwell Mfg Co. Model A1002-566-5171-SC-9341 1HP 3 Phase. 60 cycle Frame 125C Temp Rise 40 C Mfg by Kingston-Conley Inc I also have a brand new Gentec converter for 110 volt use cost me $250.00. This drill press weights 450 pounds and is a vintage from the 80s. The new ones sells for $3600.00 and does the same job. The difference is that this one is made is USA! I got this drill from my father. The reason im selling its because I have no use for and is taking space. Unit is in storage in Port Saint lucie and I can take to you if you dont have a truck if you are around 50 miles from port saint lucie but make sure you want! Asking $850.00 Call Mario at 9544482064 Please do not waste our time. Best regards! Location: port saint lucie•it's NOT ok to contact this poster with ... moreservices or other commercial interests Posting ID: 3861720589
|
|
|
Clausing 1784 Benchtop Drill Press Vintage Variable Speed Chucks Delta Rockwell
Clausing Model 1784 Bench Top Drill Press This machine is in very good condition. Included in this auction is 3 spare chucks. Shipping will vary on your location. Local Pick up is always welcome. IF YOU USE BUY IT NOW. SHIPPING IS FREE!
|
|
|
1945 Delta Rockwell 14" Drill Press
For sale is a nice 1945 vintage Delta 14" drill press. Catalog/model number 17-207. This is the slow speed model with 4 speeds of 470. 780, 1300 and 1950 RPM. The drill press has a single phase. 1/3 HP Delta Repulsion-Induction motor and is wired to run from a standard 120 volt wall plug. The motor has new bearings and has been repainted. The drill press has the original finish that is little tired. I.e. some rust is visable on the surface. The spindle bearings are in good condition. New cord. Switch and belt installed. The drill press has 0.002" run-out as measured on a pin 1.5" down from the Jacobs 6A chuck. The table has a few marks, but no drill bit thru holes. PS the cart is not included with the drill press. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13f687b8257-0xd9-
|
|
|
Vintage DELTA ROCKWELL DP 220 MORTISING SPINDLE 280 Drill Press
Vintage Delta Milwaukee 161/4" mortising spindle from a DP 220. 1/2" bore. In great shape. Posted with
|
|
|
Delta Rockwell Drill Press Single Spindle 17", 12"x 11" Tilting Table (24610)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 24610. 17" Delta Rockwell Spindle Drill SERIAL NUMBER: 53-9899 GENERAL SPECIFICATIONS Floor Model Spindle Speeds. Variable: 300 to 2000 RPM Tilting Table 12" x 11" Base Surface: 13 1/2" x 9 3/4 machined base Quill Stroke: 4 3/4" Table Rising mechanism EQUIPPED WITH 1 HP Motor. 1725 RPM 220/60/3 Manuel Push Button Start No. 2M.T. Approximate Weight: 200 Lbs. Shipping Dimensions: 26" x 30" x 68" Tall F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood ... moreMachinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the
|
|
|
15" Rockwell Bench type Drill Press W/ Tapmatic Tapping Head
You are bidding on a 15" Rockwell Bench type Drill Press W/ Tapmatic Tapping Head*In working order* Being Sold As Is* See picture 4& 5 for spec's Dimensions: 36H x 10-1/2W x 25-1/2D Note: We are not reseller's of the item. We have no need for them any longer. Local pick up ONLY! Any questions about the auction feel free to email or call Office Hours: M-F 8am- 5pm Sat: 8am- 1pm-Call Toll Free: 1-866-335-2733 ext 10-Ask for Matthew#115
|
|
|
Rare Vintage Rockwell Reciprocating File Saw Drill Press Head Delta
I do not know specifically what machine/unit this was made for but it is a Rockwell Reciprocating head model TAB-169. It has a 5/8" shaft and is set up with a Nicholson file bit currently. The bits are interchangeable of course and a saw or other bit could be used. Measures about 8"x8" not including the bit and is all metal. It works but I have not run it on a machine. There is an oil filler screw on the side with gasket so I assume the case is meant to be oiled although I do not have specs on it. If it is run without oil and burnt out. No returns. Thank you!
|
|
|
DELTA ROCKWELL 17" DRILL PRESS MOTOR MOUNT FOR EARLY 17
Offering a motor mount for a 17" Rockwell Delta drill press This fits the early style 17" drills with DP-600 head casting# Good shape. No extra holes or damage Any questions: e-mail. Or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
|
|
|
Delta Rockwell Milwaukee 1/2 HP 1725 RPM Motor Lathe Drill Press Shaper Jointer
DELTA ROCKWELL MILWAUKEE 1/2 H.P. MOTOR FROM A MODEL 1460(46-305) 12" WOOD LATHE. 1725 R.P.M. 3/4" DUAL KEYED SHAFTS. DUAL VOLTAGE 115/230 VLOT MOTOR CURRENTLY SET ON 115 VOLTS. 7.0/ 3.5 AMPS FRAME 171 THIS HEAVY DUTY MOTOR COMES WITH 4 STEP PULLEY. SHAFT GUARD/CONDOM AND ORIGINAL SWITCH AND WEIGHS APPOX. 45 POUNDS. THIS MOTOR WAS MADE IN THE USA BY MARATHON ELECTRIC FOR DELTA MANUFACTURING. THIS MOTOR SHIPS TO THE LOWER 48 STATES ONLY. I AM ALWAYS WILLING TO COMBINE SHIPPING WHEN POSSIBLE. Will be parting out Vintage Delta 12" Wood Lathe Model Number 1460 Including all parts. Original motor and legs. All parts are in GREAT Shape. If you need any parts please message me. Using the"ask a question" function.
|
|
|
Rockwell varible speed drill press
This drill press is still made today. The drill press was completely rebuilt with all new bearing. Belt with new nylon keys. Take a look and see the juke that people are trying to sell for big bucks. Make me a decent offer and it is yours. Thanks. Buyer responsible for shipping. Series 17-600.
|
|
|
Rockwell / Delta 20" drill press 70-6X0 ***** HEAD ONLY ******
230V/460V 3phase 1 1/2 HP Motors- 1735rpm 20” Height Capacity Variable Speed Drive This machine is owned and was used by a small prototype shop. Lack of use and need for space are reasons for sale. Unit on the right side has missing"head travle" crank but spindle up/down works fine. Besides that it was functioning properly when it was disconnected. Please feel free to ask any questions and I can also email more photos if needed. There is a $300.00 security deposit due within 72 hours of the close of the listing. This can be paid with paypal. Certified check, or cashiers check. The full balance is due upon pick-up in cash, certified check, or a cashiers check from your bank that must clear before pick-up or shipping. We do not accept full payment with Paypal. This machine is being sold AS-IS. This item must be shipped by freight. ... moreBuyer responsiable for all shipping cost(we do have fork lift) Please feel free to ask questions and I will do my best to answer them. I can also email more photos. Thank you
|
|
|
Delta Rockwell Milwaukee 14" Drill Press Depth Index Pointer DP-220 Head Casting
DEPTH INDEX POINTER FOR A DELTA ROCKWELL MILWAUKEE 14" DRILL PRESS WITH A DP-220 HEAD CASTING. I AM ALWAYS WILLING TO COMBINE SHIPPING WHEN POSSIBLE. Will be parting out a Vintage 14" Delta drill press including all parts. Retirement light and original motor. If you need any parts please message me. Using the"ask a question" function.
|
|
|
Vintage Delta Rockwell Drill Press Pulley Belt Guard
Vintage Walker Turner Drill Press Pulley Belt Guard. As is. It will need a wipe down& is ready for mounting. It came from a 15" DP. You will have to check to see if it mounts to other units. Thanks for taking the time to review my auction.
|
|
|
Vintage New-Old-Stock 1951 Delta Rockwell 17" Drill Press
For sale is a New-Old-Stock 1951 Delta 17" drill press. I purchased this from the Grandson of the original owner who had inherited it. This drill press was stored in his Grandfather garage for 62 years and never setup and operated. The"As-found condition photo" links below show the condition of the drill press when I purchased it and there is no dought in my mind that this drill press was never put in to service. Since most of the drill press was stored in the open air some refurbishment was need to put it into service. As noted above this is a 1951 Delta 17" drill press and its m odel number 17-210. This is the slow speed model with 5 speeds of 385. 600, 935, 1450 and 2240 RPM. It has the large production table, a MT-2 spindle nose and a Jacobs 6A chuck. The drill press has a single phase. 3/4 HP Delta capacitor start ... moremotor that will run on 110 or 220 volts and is currently wired to run from a standard 120 volt wall plug. The drill press has been completely disassembled and the rust removed from the bare metal surfaces. Dried oil& grease removed, and about 90% of the rust removed from the painted surfaces. The original finish was retained with all its faults and refinished with two coats of matte clear. So the drill press has a lot of charactor, so you will see some bare metal and some rust along with the gray paint under the clear finish. The work table has some light pitting and the Jacobs chuck sleeve also has a little pitting. The column has has some scratches, but no noticable pitting. The pot-metal knobs and handles have some bubbling under the chrome plating. All 4 bearings in the drill press spindle were replaced since the factory install bearings had dried out and were unusable. The motor bearings were good and surprisingly the cord was also good. A new belt was also provided. This is a nice drill press and you won't be disappointed. If you would like to inspect the drill press before biding or making an offer drop me an email to arange a time to come kick the tires. PS the c
|
|
|
VINTAGE DELTA ROCKWELL MODEL 11-100 DRILL PRESS (WORKING CONDITION) 1950S
VINTAGE DELTA ROCKWELL MODEL 11-100 DRILL PRESS(WORKING CONDITION) THIS DRILL PRESS IS IN WORKING CONDITION. BUT NEEDS MAJOR TLC. I THINK THIS DRILL IS FROM THE 50S. WOULD BE A GREAT RESTORATION PROJECT FOR SOMEONE THAT WOULD PUT TIME INTO IT. IT LOOKS LIKE ALL THE PARTS ARE WITH THE UNIT. BUT DON'T KNOW ENOUGH ABOUT THIS OLD DRILL TO BE SURE. I WILL NOT SHIP. THIS IS FOR LOCAL PICK UP ONLY. NORTH JERSEY/ NORTH ARLINGTON, KEARNY) NJ AREA THIS UNIT COMES WITH NO WARRANTY. WILL DEMONSTRATE UPON LOCAL PICK-UP. BUYER BUYS AS IS CONDITION
|
|
|
Vintage 1955 Delta Rockwell 17" Drill Press Do-It-Yourself Project
For sale is a 1955 vintage Delta 17" drill press DIY project. Model number 17-210. This is the slow speed model with 5 speeds of 385. 600, 935, 1450 and 2240 RPM. It has the MT-2 spindle nose with a Jacobs No. 34 chuck. The motor single phase. 1/2 HP Delta motor and is wired to run from a standard 120 volt wall plug. The motor bearings are good. It has the push-pull start rod compatible switch, just slip on the pulley and bolt it on, its ready to go. As I noted this is a Do-It-Yourself project machine. I have inspected the drill press and there are no missing or broken parts. What was missing or broken has been replaced or is sitting on the table in the pictures. There are 4 new bearings for the spindle included. The spindle turns freely now and if you don't want the bearings you can take $90 of the asking price. Just note that your ... moreoffer is without bearings. I have set this up as best I can for you to be successful rebuilding a vintage drill press for your workshop. Paint it. Clean it, polish it, etc. as you see fit. PS the cart is not included in the sale.
|
|
|
DELTA ROCKWELL 17 INCH DRILL PRESS RETURN SPRING AND HARDWARE
Up for Sale is a Delta rockwell 17 inch drill press return spring with hardware. Item is in good usable condition. The cap cover is missing. These parts fit the following drill presses and most likely a few others. 17" 1370, 17-205, 17-206, 17-207, 17-208, 17-210, 17-211, 17-212, 17-213. This is the old style DP-600 Z head casting. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine ... moreparts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect t
|
|
|
Vintage Delta Rockwell Drill Press Pulley Cover Belt Guard
Vintage Delta Rockwell Milwaukee Drill Press Pulley Cover Belt Guard. As is. It will need a wipe down& is ready for mounting. It came from a 15" DP. You will have to check to see if it mounts to other units. Thanks for taking the time to review my auction.
|
|
|
Vintage DELTA ROCKWELL Shaper Bearing Spindle Cartridge Belt Assembly
I will be listing an awesome 1946 DELTA MILWAUKEE ROCKWELL Floor Model Drill Press this evening as well as a nice variety of ACCESSORIES including SPINDLES. CHUCKS. PULLEYS. MORTISING ATTACHMENTS. And more so please see all of my Listings. I do offer combijned shipping! For your bidding consideration in this auction is the following Torque Tool or accessory: LOT# 10 ITEM: Vintage Delta Rockwell Shaper Bearing Spindle Cartridge Belt Assembly. DESCRIPTION: I believe this goes to a 43-120 Delta Shaper but it is being sold as-is. So please view photos and ask questions. MEASUREMENTS: The sleeve measures 3" long and 2" in diameter. The Pulley is 2 1/2" in diameter. The arbor hole measures 1/2" in diameter. The bearing sappear very good as the pulley moves very smoothly and quietly. CONDITION: Used but in very nice cosmetic ... moreand working condition. SELLERS TRADE PRACTICES: I want your Bidding and Purchasing experience with me to be a satisfactor y one in every way. I have provided a few thoughts below to help you understand my practices and what has proven to work successfully for me and over 5000 of my customers in ensuring an above satisfactory transaction here on Ebay. Please let me know if you have any questions or comments! FEEDBACK: I gladly provide POSTIVE FEEDBACK once our transaction has been completed to your satisfaction and I have recieved your Positive Feedback. PAYMENT: I accept Paypal payment and you should pay for your items within 4 days of the Auction close. I use Ebay's system for payment reminder and notification. LISTING/ ITEM DESCRIPTION: Please ask questions- I try and describe items as best I can. And add corresponding Photos, but I don't always know what may be important to you. RETURN POLICY: I accept returns for full refund within 7 days of the auction close date if your receive the item. Feel it was not as described, and we come to agreement on that condition. I do require you to contact me first, before returning the item, to discuss however so I have a chance to u
|
|
|
Rockwell 15-66 Benchtop Drill Press Variable Speed Delta Will Ship 3/4 HP 115v
Industrial ROCKWELL model 15-665 VARIABLE SPEED controlled BENCH TOP 15" 115/230 volt(presently wired for 115volt) 1725 rpm 3/4HP motor Very good condition for it's age(probably 1970's) was used only in a high school tech program. Will stretch wrap and place on skid for shipping. For no additional charge. Will deliver locally(15 milesof 06111) for free.
|
|
|
Rockwell Delta Drill Press Swivel Tilt
Nice swivel and tilt.CA tax for CA res Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-140860d24e1-0x102-
|
|
|
Delta Rockwell Drill Press Top Pulley Housing DP220 NICE!!
This came from an estate sale. It appears to be in excellent condition with no broken pieces. It stands roughly 16 1/2" tall.
|
|
|
Delta Rockwell Drill Press 17" U.S.A. Variable Speed Single Phase
This is a U.S.A. made 17" Rockwell drill press on a mobile base for sale. It has a 1.5 hp motor. 120 volt, single phase and is a variable speed machine. Very nice condition floor model. I have added a custom slow speed attachment for drilling up to 1" in soft steel. Number 2 morse taper spindle with the drill chuck and key included. This unit runs quiet, no vibration, smooth speed changes. I am downsizing my operation and have a Bridgeport and another drill press, this one offered for sale. See my other items. Please see pictures. Free delivery within a 100 mile radius of Terre Haute. In. Buyer pays all truck shipping fees if shipped.
|
|
|
Vintage Drill Press Hub & Handles, Delta Rockwell, Homecraft Craftsman Atlas ???
Vintage drill press handles and hub. I have not been able to figure out exactly what machines these go to. One is gray and looks like saturn. It is 7" long x 3/8" diameter shaft. One is maroon colored and round. It is 6 1/2" long x 3/8" diameter shaft. The hub is 2" in Diameter with a 3/4" hole. It holds 3 handles and has a set screw. These are obviously old and used. Please look at photos carefully before bidding. Handle shafts have light surface rust that I think would cleanup nicely. I will answer any questions asap. Thanks for looking! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14135241e3e-0x105-
|
|
|
Rockwell EFI- 2P Drilling Machine/Press Needs Motor- No Reserve
Rockwell EFI- 2P Drilling Machine/Press Needs Motor- No Reserve This press just needs a motor HP- 1.3-1.9 3 Phase Volts- 230 Local Pick Up or Buyer is responsible for Freight arrangment and pick up. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
WALKER TURNER Radial drill press/Rockwell/3/4HP motor/motor mount/4step pulley
I am selling included 3/4HP 3PH rockwell motor 1EA. Motor mount 1EA, 4step motor pulley 1EA. Until recently I used they on walker tuner radial drill press 11000 series. The motor is working and good condition. I have replaced new bearing in the motor. the motor bore is 5/8" There weight is total about 35lbs. 3PH. 220V or 440V. I am selling as is as picture. P.S. You can choice that the shipping cost is by ship($48.Econamy shipping) or by air mail($155, USPS) if you choice it by the ship. Then you will need more the time to receive(about 45~55 days from Korea to you) However let me know if you want to USPS. Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14146e79ab7-0xf1-
|
|
|
DELTA ROCKWELL 17 INCH DRILL PRESS DEPTH GAUGE ROD
STOP ROD DEPTH GAUGE FROM A DELTA ROCKWELL MODEL 17-600 DRILL PRESS. 6" STROKE APPOX. 9" OVER ALL. NICE CONDITION.
|
|
|
Rockwell Drill Press Model 66-320 for Parts, Repair, or Salvage
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Rockwell Drill Press Model 66-320 for Parts. Repair, or Salvage Item Description: This is a Rockwell drill press. Model# 66-320. Repair. Salvage, or scrap for parts. Currently not working. We were unable to test ... morethis unit. As it is currently stored outdoors. Power requirements: 1/2HP 208/220 Volt 3 phase unit. NOTES: Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Lancaster. CA, 93535 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 36165) nbsp, nbsp, Model: 66-320 Ser# 119-8094, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Condition: This item is used and sold as-is. This item was not tested for operation. Not in current working condition. nbsp, nbsp, Pickup Logistics and Handling: Forklift may be available on site to assist in loading on pickup day. However. NO loading dock is available
|
|
|
DELTA ROCKWELL 17" DRILL PRESS UPPER POWER HEAD SPINDLE ASSEMBLY - VINTAGE
Delta 17" drill press upper power head/ spindle assembly. I believe this came off a drill press manufactured in the mid to late 1960's. The manual which came with it is dated 1966. Drill press serial number is SN# 119-4043. The power head is in good overall condition with no broken or cracked parts. One small machine screw is missing holding the tightening lever onto its splines shaft that adjusts the tension holding the power head onto the drill presses post/ column. This is on the left side of the power head if looking at its front. All parts a functioning very well. The spring return on the return stroke is smooth and even. Spindle bearings are in very good shape and run freely. The spindle is true and the chuck runs with any run out. Comes with Jacobs chuck number#633 with a 1/2" capacity, and a Jacobs#3 series chuck key. ... moreIncluded also is the stepped pulley for the spindle though the largest pulley has two very slight dents in the upper rim of the pulley one might be able to file these out. Only two bolts on the rear motor mounting plate are with it. I don't have the motor, upper guard, or the other stepped pulley. Drill press mounts on a 2-3/4" column or post. The item will be well packed to insure safe delivery. $2 extra will insure the item for $300. Please wait for an invoice before paying. Will ship Fed Ex or UPS.
|
|
|
GE / Rockwell Drill Press Cat# 15-655 Serial# 1415226
This is for Pick-Up only. I live in central Connecticut. About 10 minutes outside of Hartford. Here is a GE/Rockwell Drill Press that is in good working condition. Measures almost 6' tall. I'm selling this for a friend, so if you have any questions, I'll pass it on to him, or just have you contact him directly. The Catalog number is 15-655, Serial number 1415226. Made in U.S.A. Check out my!
|
|
|
DELTA ROCKWELL DRILL PRESS POST COLUMN COLLAR BUFFALO FORGE WALKER TURNER 2-3/4
Drill press post column collar. I believe this is an early Delta drill press collar. But it might also be for a Walker Turner, Buffalo Forge Drill or Atlas press. The casting numbers on the column clamp read D.D.P. 62. There are a few nicks in the collar where it appears the collar was damaged slightly. There are no cracks or breaks in the collar, and it is in otherwise good condition. The damage shouldn't effect the collars performance. Returns accepted. Fits a 2-3/4" column.Will bundle multiple items for cheaper shipping.
|
|
|
DELTA ROCKWELL DRILL PRESS TABLE SUPPORT BRACKET BUFFALO FORGE WALKER TURNER
Drill press table support bracket. I believe this is an early Delta drill press table support bracket. But it might also be for a Walker Turner, Buffalo Forge Drill or Atlas press. The casting numbers on the matching drill press column clamp read D.D.P. 62, this part came from the same drill press but isn't included in this auction. The casting number on this I believe reads 1. The bracket fits a 2-3/4" column/ post. Returns accepted. Will bundle multiple items for cheaper shipping.
|
|
|
Rockwell Drill Press Mortising Attachment/jig
From a closed hardware store. Selling as used but probably New old stock. Looks unused but original box and original instructions are shopworn as shown. Dates from 60's( with original price shown. US made high quality.
|
|
|
1 Delta Milwaukee Rockwell Industrial Floor Drill Press Vintage 1725/1425 RPM
Delta Milwaukee Rockwell Industrial Floor Drill Press Vintage 1725/1425 RPM Used. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1432e012554-0xe1-
|
|
|
Walker Turner /Rockwell, Delta Drill Press Pinion & down feed Handle
Walker Turner. Rockwell, Delta PINION& feed handle for 20" and 17" Drill presses, This is a vintage steel Pinion and feed handle from a 20" Walker turner drill press. Rockwell later bought Walker Turner so this plate will fit certain Rockwell/Delta drills(you will have to check which ones) These mounts were produced by Walker Turner in the 1940's and early 1950's on their top of the line drill press. The 1100 series. Worked well and went up and down smoothley. Includes screw in T-shaped pin to lock on the return spring Please see my other auctions for more classic parts. Item will be carefully wrapped and boxed. No charge for handling and I have a FedEx business account so ground shipping will be cheaper than the post office or UPS. You will pay actual shipping costs. I don't pad the bills. Contact me if there ... moreis a question about shipping charges as the shipping. Calculator in the auction is often iaccurate.
|
|
|
*Walker-Turner* *Rockwell* 20" Drill Press Head Column Lock ~Locking Mechanism~
These are the parts that make up the Mechanism that locks the head in place on the Walker-Turner 1100 Series and Rockwell 70-400 20" Drill Press. When engaged. This lock keeps the head from rotating. And/or dropping suddenly. The mechanism is composed of. And this listing includes. Four component parts: Acorn Nut Washer Stud& Lock Block All these parts are used. They were all. However, cleaned. And thoroughly inspected. Some minor dings remain, but these are Guaranteed in Great Working Condition! Any questions. Let me know! Thanks!
|
|
|
Cast Iron- Walker Turner Rockwell/Delta Spindle Cap, Cover, Bearing retainer
0 0 1 197 1125 SDG 9 2 1320 14.0 Normal 0 false false false EN-US JA X-NONE Cast Ion Walker Turner Rockwell/Delta Spindle Cap. Cover, Bearing retainer I am selling a Walker Turner drill press spindle cover in very good condition. It has been cleaned. Stripped to bare metal, then primed with automotive primer and painted dark machine gray. There is no damage nor repairs and they look close to as they would when new. This one is cast iron with machined surfaces. 2 factory centering dowels and an integrated oiler on the top. These fit the Walker Turner and later the Rockwell Delta Drill presses which used the cast and machined flanged covers/caps. The inside is machined to mate with the bearings and the flange with the drill presses’ head. Please feel free to ask any questions.satisfaction is important to me. Item will be carefully wrapped and ... moreboxed. No charge for handling and I have a FedEx business account so ground shipping will be cheaper than the post office or UPS. You will pay actual shipping costs. I don't pad the bills. Contact me if there is a question about shipping charges as the shipping calculator in the auction is often inaccurate. I have a 100% positive feedback: provide high quality items and service for fair prices. Please see other auction as I have 3 of these for sale and well as other parts for classic Walker Turner machines. Thanks for looking-
|
|
|
Rockwell/Delta Mfg. Benchtop Drill & Accessories
Benchtop Drill- Delta MfgDivision/Rockwell Manufacturing co Milwaukee. WI; HDP 125; DES 148827: 12”Space. and pictured accessories
|
|
|
Delta Rockwell DP 220 #97 Mortising Spindle
Delta Rockwell mortising spindle in great condition both set screws thread in and out with no problem. Item is sold as is if you have any questions please ask before buying. I only ship in USA no international shipping. Posted with
|
|
|
Delta Milwaukee DP220 Drill Press Pulley Guard DP 256 rockwell walker turner
Here we have the headstock pulley off of a vintage Delta DP220 Drill Press. Includes the necessary 3 mounting bolts. As you can see in all of the pics. Still in good shape. Posted with
|
|
|
Walker Turner /Rockwell, Delta Drill Press Motor Mounting Plate- Cast Iron
Walker Turner. Rockwell, Delta cast iron Motor Mounting plate for 20" and 17" Drill presses, This is a vintage very heavy cast iron motor mounting plate from a 20" Walker turner drill press. Rockwell later bought Walker Turner so this plate will fit certain Rockwell/Delta drills(you will have to check which ones) These mounts were produced by Walker Turner in the 1940's and early 1950's on their top of the line drill press. The 1100 series. This part is in excellent mechanical and cosmetic shape. Part# HD18 Part was stripped to bare metal with abrasive media(for the iron parts) Then primed with auto primer and painted. All threads were chased. With taps and dies and lubed. Feel free to contact me with any questions. Please see my other auctions for more classic parts. Item will be carefully wrapped and boxed. No charge ... morefor handling and I have a FedEx business account so ground shipping will be cheaper than the post office or UPS. You will pay actual shipping costs. I don't pad the bills. Contact me if there is a question about shipping charges as the shipping. Calculator in the auction is often iaccurate.
|
|
|
Classic Walker Turner /Rockwell 20" Drill Press Belt Guard , Art Deco Cast Iron
Walker Turner Rockwell/Delta Belt Guard for 20" Drill Press. This is a vintage hard to find cast Iron Art Deco belt guard in super shape. These were produced by Walker Turner(later Rockwell) In the 1940's and early 1950's on their top of the line drill press. The 1100 series. This belt guard is very heavy duty cast iron. Designed in the stylized 40's Deco Aerodynamic trend. This part is in excellent mechanical and cosmetic shape. The guard was stripped to bare metal with abrasive media. Then primed with auto primer and painted. All threaded holes were chased with a tap and all the screws run on a die. There are no cracks or welding. One iron ear was replaced with cold roll steel by a machine shop. They did. Nice work. Mounted on a drill press you probably wouldn't notice the different material on the one ear unless. Someone ... morecalled your attention to it. The factory embossed tag is in good. Shape as well(see pictures) and all the info on. The metal plate about drill press speeds and motors is legible. On Dec-16-13 at 11:07:12 PST. Seller added the following information: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Walker Turner Rockwell/Delta Belt Guard for 20" Drill Press. This is a vintage hard to find cast Iron Art Deco belt guard in super shape. These were produced by Walker Turner(later Rockwell) in the 1940's and early 1950's on their top of the line drill press. The 1100 series. This belt guard is very heavy duty cast iron designed in the stylized 40's Deco Aerodynamic trend. This part is in excellent mechanical and cosmetic shape. The guard was stripped to bare metal with abrasive media. Then primed with auto primer and painted. All threaded holes were chased with a tap and all the screws run on a die. There are no cracks or welding. One iron ear was replaced with cold roll steel by a machine shop. They did nice work. Mounted on a drill press you probably wouldn't notice the different material on the one ear unless someone called your at
|
|
|
WALKER TURNER DRILL PRESS BASE UPRIGHT FREE STANDING - DELTA ROCKWELL
Walker Turner freestanding drill press base. The base is off an older drill press I believe was from the 1950's. The base is in good overall condition. Fits a 2-3/4" post/ column. The base is missing one set screw to fix the post to the base. Serial numbers read 9D943. The base will be well packed to insure it arrives safely.
|
|
|
! Bux NL2RP / Rockwell 77751 Reversible Magnetic Drill Press w/ Morse Taper #3
RDR ELECTRONICS WILL ONLY SHIP TO U.S. ADDRESSES. FOREIGN BIDDERS WILL BE APPROVED TO BID ONLY AFTER PROVIDING A U.S. SHIPPING ADDRESS! Auction consisting of: 1- Bux/ Rockwell Reversible Magnetic Drill Press NL2RP. This auction is for a used Bux/ Rockwell Reversible Magnetic Drill Press NL2RP. We powered unit up and ran drill in both directions and engaged the magnetic base clamping and all looked ok. However, the red magnet engaged light does not illuminate when on. The Rockwell Drill is 3/4hp, and is model# 77751. It has a No Load speed of 400RPM and a Full Load speed of 250RPM. The drill chuck has a Morse#3 taper and one 11/16" bit is included. We acquired this unit from an aerospace firm in a surplus lot, it has plenty of signs of use with smudges and cosmetic imperfections here and there, but overall it is in solid condition. The ... moreunit comes with all three threaded feed handles. We have a great starting bid and we are including a 30-day warranty on this sale! Only what is listed above and/or shown in the pictures below are included in this auction. Item weighs about 77 pounds. Unit ships at pound rate because of box size. This Drill will be shipped in a 30x24x12 double-walled box with four expanding foam-in-place inserts to keep it from shifting. Our shipping services are top notch. We do not try to make(or lose) money on our S/H cost, we try to offer quality shipping at a fair price, shipping will not be cheap, however! Used condition. This item is being sold with a 30-day warranty. Check the shipping calculator for S/H cost to your ZIP code. Item will be insured for the bid amount. To view all of our current E-bay auctions click on our RDR-Electronics Items for Sale Page link below! Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Terms and Conditions: There is no need for us to email you after the auction ends. Simply pay the amount of the winning bid plus the
|
|
|
15" Rockwell Drill Press 15-665 3/4 Hp 1/2" Drill Chuck 3 Phase
You are bidding on a USED Rockwell Drill Press. Model: 15-665- 15" Swing- 3/4 Hp Step Pulley- There is a broken flange on 1 pulley- See Photo. 1/2" Chuck 230/460 Volt- 3 Phase Will skid for an additional $ 50.00 Call 262-719-0232 or email with questions.
|
|
|
ROCKWELL MANUAL 15" DRILL PRESS FLOOR MODEL WITH MOTOR #15-085 - 1978 Ed. ENG/FR
This sale is for ONE previously owned COPY of: Rockwell International of Canada Ltd. 15" DRILL PRESS FLOOR MODEL WITH MOTOR/ PERCEUSE A COLONNE DE 15" MODELE DE PLANCHER AVEC UN MOTEUR. Cat. 45-085(Guelph 1978) 7 pages. This manual is completely bilingual English and French Canadian. It focuses on the machine's speeds, adjustments, operation, maintenance, safety and includes a parts list. Please note that the previous owner has three hole punched near the spine for storage in a three ring binder. This item was part of the collection of a Rockwell dealer and is in excellent-good condition. This would make a great gift for the owner of or the collector of Rockwell products. This PUBLICATION is being offered at an exceptional price. A rule may appear in the photographs for scale reference only and is not part of this sale. Thank ... moreyou for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their go-vernment when items cross the border. These are the sole responsabi, lity of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents, so please don't ask. We now accept PAYP AL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability. Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds
|
|
|
VINTAGE 14" DELTA ROCKWELL DRILL PRESS QUILL PINION
FROM CAT#14000 FOR REF. 1 1/4" BODY DIA. 13 TOOTH PINION 1/2-20 STEP DIA. FOR SPRING DRILLED HOLE FOR 7/16 HANDLE(NOT PROVIDED) O/A LENGTH 8 5/8 WITH 3/8-24 HANDLE THUMB SCREW LOCK PINION SHOWS HARDENED GREASE WITH NO APPRECIABLE WEAR. FEW MARKS ON BODY O.D. FILED AND POLISHED NEEDS A GOOD CLEAN AND POLISH. GOOD USEABLE PART COMPLETE PART-OUT
|
|
|
Rockwell/Delta No. 869 Two Spindle Drill
EQUIPPED WITH: Jacobs Chuck 230/460/3 Phase 60 Cycle SPECIFICATIONS: Throat: 8" Bottom of Spindle to Table: 24" Table Size: 24" x 65" Distance Between Spindles: 36" Spindle Travel: 5" Spindle Speeds: 230-2830 Motor: 1140 rpm. 1hp
|
|
|
VINTAGE WALKER-TURNER / ROCKWELL MFG.CO. 3/4 HP DRILL PRESS
This strong running drill press is made in the U.S. of A. and appears to be all original except for the motor and pulley guard on the motor end. The motor is made by the same company as the press but appears newer. I worked for the company I purchased this machine from for over 25 yrs- the motor must have been replaced before I started there. General dimensions: Overall height- aprx. 66" || Base: 18" x 26" || Table working area: aprx. 12 5/8" x 17 1/8" 16" x 20 5/8" including chip/coolant trough) || 8.5" throat(center of spindle to front of column support) || Spindle or quill stroke: aprx. 5" || Min. to max. table elevation from floor: aprx. 28" to 42" aprx. 16" from tip of Jacobs chuck jaws to top of table surface when fully lowered) || Drill chuck: Jacobs Mdl. 6A(2 MT and No.33 ... moreJacobs) 0" 1/2" capacity. Motor specifications: ROCKWELL MANUFACTURING CO. POWER TOOL DIVISION. PITTSBURG 8, PENNSYLVANIA 3 Phase- 3/4 HP- Mdl. 86-720 || 208-220/440 volts || 1725/1426 R.P.M. || 2.8/1.4- 3.4/1.7 amps || Frame 66Y || Type P. The machine is currently under power and can be physically tested for motor/ bearing noises as well as cutting capability. Local pick up only- will help load. I'm guessing it weighs at least 300 lbs. I expect payment via PayPal and made within 3 days of winning bid. Upon seller notifying buyer that payment has cleared, buyer must take possesion of machine within a maximum of 10 days. For more photos or info feel free to inquire. I'm negotiable and will entertain all serious offers.
|
|
|
Rockwell 20"Floor Model Drill Press,1 HP,Single Phase 115V INV=13118
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Rockwell Single Spindle Floor Model Drill Press. 20" Swing(10" from face of column to C/L of spindle) No.2 Morse taper spindle. 18-1/8" X 15-1/2" Working surface of table. 14-7/8" X 13-5/8" Working surface of base. 40-1/2" Maximum distance from spindle nose to base. 6" Vertical travel of quill. 5) Step cone pulley for spindle speed selection. 4) Step cone pulley for feedrate selection. Equipped with 1 HP. 1/60/115/230V Single Phase AC motor(currently set-up for 1/60/115V operation) and Jacobs 0-1/2" capacity ball bearing drill chuck. NOTE: The power feed system on this drill press is NOT CURRENTLY WORKING, and will need to be adjusted or repaired if you need to use the power quill feed. It is missing the belt. No foreign bidders. No ... moreexceptions. NO CANADIANS. This item ships by Freight(by truck) It cannot be shipped by UPS or USPS. This item does NOT offer free shipping. If you need to discuss shipping prior to bidding. Call me at 63O-235-66O3. Please do NOT pay until you discuss shipping with me and I invoice you. The buyer has three options: Free pick-up at my location in Berkeley. IL, 60163, I can get a freight quote and charge you my cost of freight and arrange shipping. You can arrange shipping with your own freight company. To whom you would pay. It needs to have electronic tracking capability to comply with PayPal requirements. Title and risk passes to buyer at pick-up. I will also charge you a palletizing charge. Charge is $15 for a regular pallet and more for custom pallets. Any crating beyond just banding to a pallet will incur an additional cost to buyer. I never ship for free and I do not consider any offers that demand free shipping. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I
|
|
|
~RETURN SPRING w/ HOUSING~ for *Rockwell 70-400 * Walker-Turner 20" Drill Press*
A Great Condition Spindle Return Spring from a Rockwell 70-400 20" Drill Press This also fits the Walker-Turner 1100 Series 20" Drill Press(Possibly others. But you'd have to research that. Any questions. Or need more photos: Just ask! Thanks!
|
|
|
Delta Milwaukee Rockwell DP 220 Quill with Mortising Spindle & Collets
Mortising spindle I took from a Delta Milwaukee DP220. Bearings are in good condition. I made the three collets. They are for 3/16, 1/4& 19/64 bit shank size.
|
|
|
Rockwell Variable Speed Drill Press with Production Table
This is a Rockwell Variable Speed Drill Press with a number# 3 Morse taper. It is 220 volt 3 phase with a production table on casters. It comes with two vises as shown. An industrial machine in very good condition. I can load this for you.
|
|
|
GE / Rockwell Commercial Drill Press Cat # 15-655 Serial # 1415226 Works
One more time. Last time. This is for Pick-Up only. I live in central Connecticut, about 10 minutes outside of Hartford. Here is a GE/Rockwell Commercial Drill Press that is in good working condition. Measures almost 6' tall. I'm selling this for a friend, so if you have any questions, I'll pass it on to him, or just have you contact him directly. The Catalog number is 15-655, Serial number 1415226. Made in U.S.A. Check out my!
|
|
|
Walker-Turner 1100* 20" Drill Press ~Complete Pinion Assembly~ *ROCKWELL 70-400
This is the PINION from a Walker-Turner 1100 Series 20" Drill Press* This pinion also fits the: Rockwell 70-400 20" Drill Press This comes complete, with all the parts that attach to it; from one end. To the other. except the Return Spring. Which is available in another listing) These are all Original parts! and, Every one of them is in Excellent Working Condition! All of the individual parts included here. Can be seen in the photos. except the handle's Square Key, which is also included here) These include: in photo#3} ~the Pinion Retainer(13-67) it's Button Head Cap Screw(SP-8015) ~the Spring Pin(212-4) in photo#5} ~Hex head Screw(SP-605) ~Washer(SP1605) ~Hand Knob(365-1-4) ~Slotted Washer(244-7) ~Dial Vernier( 13-50) And. Of course, the Handle. With it's: 3 plastic knobs Hex screw& Washer, Square Key. Let me know ... moreif you've got any questions. Thanks!
|
|
 |