|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Hopewell, United States Delta Milwaukee Rockwell Industrial Floor Drill Press Vintage 1725/1425 RPM Used. Guaranteed to work or your money back.
Buy It Now
Condition: Used Location: Belmont, United States For sale is a refurbished 1940 Delta 17" drill press. Catalog number 1382 or the later m odel number 17-210. The drill press has a single phase. ... more3/4 HP Delta Repulsion-Induction motor and is wired to run from a standard 120 volt wall plug. The motor is from 1941 to 1944 and most of the data on the steel motor tag is gone. The drill press has been completely disassembled. Sand blasted, and refinished. All bearings in the motor and drill press have been replaced. The drill press has 0.002" run-out as measured on a bare arbor and the Jacobs 6A chuck has 0.004" run-out as measured on a pin 1.5" down from the chuck. This is the slow speed model with 5 speeds of 385. 600, 935, 1450 and 2240 RPM. The production table has a few hits from drill bits and some thru holes. This is a nice drill press and you won't be disappointed. PS the cart is not included with the drill press.
Buy It Now
$143.25 Shipping Condition: Open box Location: Tallmadge, United States Delta 11-950 Type 2 8"Bench Drill Press, 115V.
Buy It Now
Free Shipping Condition: Used Location: Chico, United States In good working condition, but has scratches, signs of use and surface marks.
Buy It Now
Free Shipping Condition: Used Location: Chico, United States In good working condition, but has scratches, signs of use, dings and surface marks.
$59.70 Shipping Condition: Used Location: Dunedin, United States This is a genuine Delta Milwaukee Drill press head assembly with motor as shown. The stand is not included. The stand shaft opening is 2 3/4" The ... moreunit is in excellent cosmetic and operating condition and has been refinished. Just a few scuffs in the paint. No cracks or breaks and the belt and wiring is very good. Includes chuck with key on a chain. Thank you! ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13faa556a1f-0x104-
Buy It Now
$5.67 Shipping Condition: New Location: Wimauma, United States However, there was one thing that I found lacking compared to those newer/import machines: the (lack of) ergonomics on the simple plain shaft of the down ... morefeed handle. They should be in by the end of the week and have new roller handles assembled by early next week.
Buy It Now
Free Shipping Condition: Used Location: Anderson, United States In good working condition, but has scratches, signs of use, rust, dings and surface marks.
Buy It Now
Free Shipping Condition: Used Location: Chico, United States In good working condition, but has scratches, signs of use and surface marks.
Buy It Now
Free Shipping Condition: New Location: Quitman, United States Delta drill press depth stop collar. Gauge, special nuts, washers, special bolts, set screw, etc. Comes off of a 14" drill press. Shop drawings show ... morewhere part fits onto YOUR drill press. Good gently used condition. No mechanical defects or breaks that I can see. Paint is obviously chipped off in some places, dirt/grease/etc on rod but I do not see any rust. Nuts in good condition, knurling is fine. Special washer(DP-318) included. Only part that I can see that is marked is the Stop Collar(DP-296. See photo) But as near as I can tell, what you get includes the following: DP-273-X Stop Rod DP-295 Stop Collar SP-1005 Nut DP-221 Special Nut SP-622 Bolt DP-275 Special Nut(quantity 2) DP-318 Washer Caveat. Item will be shipped disassembled. I will separate the rod from the collar. You will have to reattach them. It is one nut you will have to tighten. Ask additional questions to make sure it fits your drill press. Shop drawings from. This is a great site and you ought to check it out if you haven't seen it yet. Also, stop by and visit at if you never have.
Buy It Now
Condition: Used Location: Powhatan, United States Vintage drill press handles and hub. I have not been able to figure out exactly what machines these go to. One is gray and looks like saturn. It is 7" ... morelong x 3/8" diameter shaft. One is maroon colored and round. It is 6 1/2" long x 3/8" diameter shaft. The hub is 2" in Diameter with a 3/4" hole. It holds 3 handles and has a set screw. These are obviously old and used. Please look at photos carefully before bidding. Handle shafts have light surface rust that I think would cleanup nicely. I will answer any questions asap. Thanks for looking! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14135241e3e-0x105-
Buy It Now
$13.51 Shipping Condition: Used Location: Ellsworth, United States Delta Rockwell 14" DP-220 Drill Press. FOOT FEED LOWER BRACKET PART No.
Buy It Now
Condition: Used Location: Bronx, United States Great smooth drill press. 1HP motor that runs on 110. I have a few drill presses that are "better" but this is probably my most used. I have too many ... moredrill presses. I need to make space. If the others sell first I may remove this post. Happy to swap out the motor for a 3 phase if you prefer.
Buy It Now
Free Shipping Condition: New Location: Cass City, United States This listing is for a delta drill press spring return cap part number 1310082 17-950l. Item comes as pictured. The condition of this item is new. Please ... morerefer to all photos for more details as they are the best part of the description.
Buy It Now
$16.88 Shipping Condition: Used Location: Ellsworth, United States
Buy It Now
$10.55 Shipping Condition: Used Location: Berlin, United States DESCRIPTION: USED. MIGHT BE NEW, NO. 2MT SPINDLE FOR THE 14" DRILL PRESS WITH DP220 HEAD CASTING. CLICK ON THE" SHIPPING AND PAYMENTS" ... moreTAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER T
Buy It Now
Free Shipping Condition: Used Location: Chico, United States In good working condition, but has scratches, signs of use, dings and surface marks.
Buy It Now
$6.60 Shipping Condition: Used Location: Dekalb, United States Delta Rockwell 17” Inch DP600 Drill Press Head / Table Lift Bearing 3 1/2 Column
Buy It Now
$12.08 Shipping Condition: Used Location: Ellsworth, United States Has rough circle area in casting or paint as shown in photos. Otherwise in good condition.
Buy It Now
$29.65 Shipping Condition: Used Location: United States Not Sure that it has ever been used. But the box has been opened. All parts intact, still in plastic bags. Fits most Drill Presses. Happy Bidding! 1?RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e99aac7d1-0xfe-
Buy It Now
Condition: Used Location: Watertown, United States BT# 12879 B02A8-075.3Y You are looking for: DELTA SHOPMASTER DP200 TOP DRILL PRESS 10" BENCH 1/4HP 120V USED ITEM. FULLY TESTED! IN GOOD CONDITIONS. ... more10 DAYS WARRANTY! Manufactured by: DELTA. SHOPMASTER. Additional info: DRILL PRESS Model: DP200 Bench: 10 inch. Induction motor for long-lasting. Smooth performance. Pivoting motor mount maintains correct belt tension and facilitates speed changes. Three-spoke pilot wheel for operator convenience. Adjustable-position. Locking depth stop for accurate depth measurement and repetitive drilling. Tilting table with slots for fast clamping of work. Standard 3-jaw. 1/2" capacity chuck for positive gripping of various drill press cutting tools. MOTOR: 1/4HP. 120V, single phase, 60 Hz. 1720 rpm QUILL TRAVEL: 2 3/8" Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
$15.86 Shipping Condition: Used Location: Columbus, United States Not Sure that it has ever been used. But the box has been opened. All parts intact, still in plastic bags. Fits most Drill Presses. Happy Bidding! 1?RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e99aac7d1-0xfe-
Buy It Now
Free Shipping Condition: Used Location: Chico, United States In good working condition, but has scratches, signs of use and surface marks.
Buy It Now
Free Shipping Condition: Used Location: Chico, United States In good working condition, but has scratches, signs of use and surface marks.
Buy It Now
$6.80 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$10.55 Shipping Condition: Used Location: Berlin, United States AS SHOWN
Buy It Now
$17.25 Shipping Condition: Used Location: Hatboro, United States
Buy It Now
$250.00 Shipping Condition: Used Location: Chicago, United States Delta Milwaukee Rockwell Industrial Floor Drill Press Vintage 1725/1425 RPM Used. Guaranteed to work or your money back.
Buy It Now
Condition: Used Location: Watertown, United States BT# 12879 B02A8-075.3Y You are looking for: DELTA SHOPMASTER DP200 TOP DRILL PRESS 10" BENCH 1/4HP 120V USED ITEM. FULLY TESTED! IN GOOD CONDITIONS. ... more10 DAYS WARRANTY! Manufactured by: DELTA. SHOPMASTER. Additional info: DRILL PRESS Model: DP200 Bench: 10 inch. Induction motor for long-lasting. Smooth performance. Pivoting motor mount maintains correct belt tension and facilitates speed changes. Three-spoke pilot wheel for operator convenience. Adjustable-position. Locking depth stop for accurate depth measurement and repetitive drilling. Tilting table with slots for fast clamping of work. Standard 3-jaw. 1/2" capacity chuck for positive gripping of various drill press cutting tools. MOTOR: 1/4HP. 120V, single phase, 60 Hz. 1720 rpm QUILL TRAVEL: 2 3/8" Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
Buy It Now
$8.75 Shipping Condition: Used Location: Sherman, United States
Buy It Now
Free Shipping Condition: Used Location: Chico, United States In good working condition, but has scratches, signs of use and surface marks.
Buy It Now
$9.06 Shipping Condition: Used Location: Ellsworth, United States Delta Rockwell 14" DP-220 Drill Press. FOOT FEED UPPER BRACKET PART No.
Buy It Now
$13.55 Shipping Condition: Used Location: Donahue, United States
Buy It Now
$10.00 Shipping Condition: Used Location: Lititz, United States Delta Rockwell 20" 2000 Drilling Machine Head Clamp Bolt and Sleeves Bolt is 5/8-11 by 7-3/4" Sleeves are 1.30" X 3.00". I will attempt to have each item ... moreas clean as possible for sale. The cost is what it is.
Buy It Now
Free Shipping Condition: Used Location: Chico, United States In good working condition, but has scratches, signs of use and surface marks.
Buy It Now
$4.80 Shipping Condition: Used Location: Cuyahoga Falls, United States FROM A DELTA MILWAUKEE 17" DRILL PRESS. OIL DOOR. CONDITION AS SHOWN IN PHOTOS.
Buy It Now
$9.50 Shipping Condition: Used Location: Cuyahoga Falls, United States FOR 17" DELTA ROCKWELL MODEL 17-600DRILL PRESS. FEED HANDLE AND HUB ASSEMBLY.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Delta Rockwell 15-207 15" (in photo's) Belts: Fenner 4L 5:1 quill 39 links, motor 34 links. V-Belt quill 4L290, motor 4L245 5.5:1. Slow speed drive system ... morefits entirely inside belt cover on my Walker Turner 900 drill press shown in first photo (NO DRILL PRESS INCLUDED).
Buy It Now
$14.50 Shipping Condition: Used Location: Wonder Lake, United States Item is in great shape, hinges work like new . It does have some stains on it. Measurements are in pictures. Includes wire hold downs and mounting screws.
Buy It Now
$300.00 Shipping Condition: Used Location: Bristol, United States 32 x 24"table shipping is an estimate please check
Buy It Now
$12.80 Shipping Condition: Used Location: Cuyahoga Falls, United States 17" DELTA ROCKWELL MILWAUKEE DRILL PRESS. HIGH SPEED SPINDLE PULLEY (PART No. DP-826) FOR A. FIVE STEP PULLEY - SIZES APPOX. 2 3/4", 3 3/4", 4 5/8", 5 ... more1/2" and 6 1/2". 17 mm BORE. NICE CONDITION AS SEEN IN PHOTOS.
Buy It Now
$37.80 Shipping Condition: Used Location: Hatboro, United States
Buy It Now
$186.21 Shipping Condition: Used Location: North Tonawanda, United States All of the gears are in good shape. It doesn’t matter what I do I cannot get a good photo. ( depends on your device ).
Buy It Now
$17.45 Shipping Condition: Used Location: Stanwood, United States This assembly has been cleaned with Simple Green and degreaser so you can clearly see its condition. The spindle spins freely and the is no discernable ... more"slop" at least when feeling by hand. The chuck adjusts throughout its range.
Buy It Now
$14.98 Shipping Condition: Used Location: North Ridgeville, United States column off dp220 drill press send offer
Buy It Now
$69.99 Shipping Condition: Used Location: Lombard, United States Used condition bearings in good shape, spring in good shape quill retracts good. Normal wear dings and scratches. Please see photos for details and condition. ... moreThanks for looking. Shipping price to the lower 48 only No PO Box shipping
Buy It Now
$27.38 Shipping Condition: Used Location: North Ridgeville, United States used 1/3 hp motor off dp220 drill press strong run motor send offer
Buy It Now
Free Shipping Condition: Used Location: Lititz, United States This bolt and nut combination were used for the quill lock and also the back cover for the head casting NOTE >>>> Style A Nut. Wait for an invoice to ... morebe sent.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States 4x spindle bushings to retrofit early new departure extended race bearings. Kit fits all 17" Delta/Rockwell old style drill presses and includes the following. ... more1x 920-08-020-5350 Snap Ring Bearing. 3x 920-08-040-5344 Bearing.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Store Here we have the DP-260 4-step motor pulley from a vintage Delta DP220 14" drill press. 1/2" belts. 1/2" bore. 2.5" tall. Smallest ... morediameter@2.15" Largest diameter@2 1/4" Twin set screws. As you can see in the pics. She's in beautiful condition. No chips, cracks, breaks, or repairs. FREE PRIORITY DOMESTIC SHIPPING!
Buy It Now
$10.55 Shipping Condition: Used Location: Berlin, United States AS SHOWN
Buy It Now
Free Shipping Condition: New Location: Naples, United States Delta K 32.5 Part # 1343782 is compatible 1343756. Delta Drill Press 12" Crosshair Laser Drill Press. Delta 11-990-Type-1. Delta 11-990-Type-2. Delta ... more11-990-Type-3.
$14.00 Shipping Condition: Used Location: North Ridgeville, United States this part came off old dp220 drill press not sure exactly wjhat the function was send offer if no bids
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Shown on a Delta DP220. Fits my Atlas 73 & 74 as well as both of my Delta & Rockwell drill presses. You can now organize your drill press litter. Fits ... moreanything with a 2.25" OD column. Common size for table top models.
Buy It Now
Free Shipping Condition: Open box Location: Richmond, United States
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States I don’t know what years these parts for but I do know Delta used many of the parts for decades. ( depends on your device ). There is a couple of options.
Buy It Now
Free Shipping Condition: Open box Location: Richmond, United States New Old Stock Delta Drill Press Quill p/n 1343775. Fits:
Buy It Now
$8.75 Shipping Condition: Used Location: Sherman, United States
Buy It Now
$17.95 Shipping Condition: Used Location: Wonder Lake, United States Parts are in good used condition. I don’t have any other pieces than what you see in the pictures. Measurements are in the photos.
Buy It Now
Free Shipping Condition: Used Location: San Ramon, United States Delta Milwaukee Multiple Speed Pulley Attachment Drill Press DP-225Used Condition (May need new bearings but they feel smooth (I don’t hear well)) From ... moreDrill Press model # 15-017Comes as shown with belts. Made In U.S.A.Free Shipping to all 50 States!!! Thanks, Steve
|
|
|
|
Vintage Delta Ball Crank Handle Table Saw, Lathe, Jointer, Drill Press, Sander
VINTAGE DELTA ROCKWELL HOMECRAFT HANDLE WAS USED BY DELTA ROCKWELL ON MANY WOODWORKING TOOLS. THIS HANDLE CAME OFF OF 6" JOINTER. SHAFT SIZE IS 7/16" AND LENGTH IS APPOX. 3 3/4" Will be parting out Vintage Delta Rockwell 6" Jointer 10" Tilt Table Saw Combination Unit Including all parts. Original motor and stand. If you need any parts please message me. Using the"ask a question" function.
|
|
|
DELTA 17 FLOOR TYPE DRILL PRESS 22183
in titles& description Name: DELTA 17 FLOOR TYPE DRILL PRESS, Ticket# 22183, Model: 127-741, Manufacturer: DELTA, Item located at: Hanover. MD, Condition: Used, Terms& Condition: As is where i, Description: 8 1/2" THROAT. 220/440 V, 1 HP | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e03620927-0xfa-
|
|
|
DELTA HOMECRAFT DRILL PRESS JACOBS DRILL CHUCK SPINDLE
CHUCK + SPINDLEFROM 11" DELTA HOMECRAFT DRILL PRESS. NICEST I'VE EVER SEEN REF. JACOBS 0-1/2 CAP. 33 TAPER MOUNT 5/8" DIA. SPINDLE- DOUBLE SPLINE DRIVE 13 1/8" LONG SHANK EXCELLENT JAWS. RACK, BODY ETC. KEY INCLUDED CAN BE CUT OFF. TURNED DOWN MODIFIED TO SUIT WITH EXISTING SPINDLE OR REMOVED FOR OTHER APPLICATIONS- I WILL SHIP ONLY CHUCK IF DESIRED FOR $5 FLAT RATE
|
|
|
Delta Depth Gauge 14" Drill Press w/ Knurled Nuts Stop Collar Clamp, Rod, Bolts
Delta drill press depth stop collar. Gauge, special nuts, washers, special bolts, set screw, etc. Comes off of a 14" drill press. Shop drawings show where part fits onto YOUR drill press. Good gently used condition. No mechanical defects or breaks that I can see. Paint is obviously chipped off in some places, dirt/grease/etc on rod but I do not see any rust. Nuts in good condition, knurling is fine. Special washer(DP-318) included. Only part that I can see that is marked is the Stop Collar(DP-296. See photo) But as near as I can tell, what you get includes the following: DP-273-X Stop Rod DP-295 Stop Collar SP-1005 Nut DP-221 Special Nut SP-622 Bolt DP-275 Special Nut(quantity 2) DP-318 Washer Caveat. Item will be shipped disassembled. I will separate the rod from the collar. You will have to reattach them. It is one nut you will have ... moreto tighten. Ask additional questions to make sure it fits your drill press. Shop drawings from. This is a great site and you ought to check it out if you haven't seen it yet. Also, stop by and visit at if you never have.
|
|
|
DELTA 15-270 15" DRILL PRESS 6 SPEED WITH WESCO LONG RAM JACK PLATFORM TABLE
YOU ARE BUYING ONE DELTA 15-270 15" DRILL PRESS 6 SPEED WITH WESCO LONG RAM JACK PLATFORM TABLE. WHAT IS PICTURED IS WHAT YOU WILL RECEIVE. EVERYTHING INCLUDED IS PICTURED. PLEASE CALL OR EMAIL IF YOU WOULD LIKE MORE SPECIFIC PHOTOS. THIS IS USED TRW MRO SURPLUS. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. CONT) SHIPPING WILL BE FOB OUR DOCK IN APACHE JUNCTION. AZ 85119. FREE SHIPPING IS FOR THE LOWER 48 STATES ONLY. FOR ALL OTHERS, PLEASE CALL OR EMAIL FOR SHIPPING QUOTES. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise ... morevalues below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my other items! Be sure to add me to your favorites list!
|
|
|
13" Delta Drill Press w/ Albrecht Chuck 0-3/8"
13" Delta Drill Press w/ Albrecht Chuck We believe the motor is faulty; however. This machine includes many functioning parts. If you are only interested in the parts. We can send some for a minimum order of $125. Albrecht chuck size: 0-3/8" Overall dimensions: 24" x 12" x 41" Delta motor information: RPM: 1725 Volts: 110/220 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional ... more$35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following recei
|
|
|
ROCKWELL-DELTA 20" 70-200 DRILL PRESS 1HP 115/230V 1720RPM
BT# 11721 B06A2-075.3Y You are looking for: ROCKWELL-DELTA 20" 70-200 DRILL PRESS 1HP 115/230V 1720RPM USED ITEM. FULLY TESTED! IN GOOD CONDITIONS. 15 DAYS WARRANTY! Manufactured by: ROCKWELL. DELTA MACHINARY. Additional info: DRILL PRESS 20 INCH. Model: 70-200 Power: 1 Hp Voltage: 115/230 V Amp: 15/7.5 PH: 1 Hz: 60 RPM: 1720 With ONLY ONE lever! Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
|
|
|
ROCKWELL DELTA 16.5" 17-965 DRILL PRESS 3/4HP 115/230V 1720RPM 16-1/2"
BT# 11727 B06A2-075.3Y You are looking for: ROCKWELL DELTA 16.5" 17-965 DRILL PRESS 3/4HP 115/230V 1720RPM 16-1/2" USED ITEM. FULLY TESTED! IN GOOD CONDITIONS. 15 DAYS WARRANTY! Manufactured by: ROCKWELL. DELTA MACHINARY. Additional info: DRILL PRESS 16.5 INCH. Model: 17-965 Serial No. 016741W2061 Power: 3/4 HP Voltage: 115/230 V Amp: 10/5 PH: 1 Hz: 60 RPM: 1720 Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e0f713684-0xfc-
|
|
|
DELTA Drill Press HP 1/4 ..RPM 1720 ..Phase 1.. Volts 115.. Amps 5.9
Local Pickup Only! 8512 Whitesburg Dr. Huntsville. Alabama 35802_ Delta Drill Press HP 1/4 RPM 1720 Phase 1 Volts 115 Amp 5.9 Motor#1310050 Insulation Class A Series RM307 No. TL Condition- Used Machine but in Excellent Working Order Our Price- $ 400.00 Please visit our ebay store for 5600+ listings THE ALABAMA PEDLAR
|
|
|
Delta 2000 20 Inch 1 Phase Variable Speed Drilling Machine Drill Press
For Sale Used Delta Series 2000 Variable S pe ed Drilling Machine Units sell as shown in pictures. Save Big $$$$$ Series 2000 20 Inch Throat 1 Phase(Can run on household current! 115/230 Volt 20.4/10.2 Amp 1.5 HP Crank adjustable Table height Table in good shape. No holes drilled onto surface Save some money $$$ today! SHIPPING- Pick up preferred. Can load on your truck or semi! Buyer to arrange shipping! L ower 48 States Call 317-994-5537 for local pick-up no handling fees. Liztonlp 7% sales tax applies to Indiana residents and local pick-up unless Tax Exempt. SAVE $$$$
|
|
|
ROCKWELL Delta 15" Drill Press Manual & Wiring Diagrams 1966-67 in Envelope
ROCKWELL MANUFACTURING COMPANY publications PM-402-04-651-5008 dated 1966 and PM-402-04-655-5018 dated 1967 instructions for Rockwell-Delta 6 Plus 6-15" Drill Press(beginning with serial#139-3001) and Electrical Wiring Diagrams For Rockwell-Delta Factory Wired 15" Drill Presses each measuring 11" x 8 1/2" have 8 and 12 pages. B+w photos and diagrams. They are in the original envelope and include a page of safety instructions. Light soiling and smudging to reverses; light extremity wear and soiling to envelope; otherwise solid and clean. Thank you.
|
|
|
17" DELTA ROCKWELL 17-600 BENCH TABLE MOUNT 6-SPEED 3PH DRILL PRESS 1HP 3PH 1140
17" DELTA ROCKWELL 17-600 BENCH TABLE MOUNT 6-SPEED 3PH DRILL PRESS 1HP 3PH 1140. DELTA ROCKWELL#17-600 17" DRILL PRESS BENCH/TABLE MOUNTED USA Made This listing is for 1 used drill press head and column assembly that appears to be in good general overall condition with some normal cosmetic wear. As seen. Rockwell motor is 1HP, 3PH, 230/460V, 60Hz, 3.8/1.9A, 1140RPM. Variable speed: six spindle speeds. Exact speeds are unknown and have not been confirmed. But similar Rockwell models with identical motor RPM(1140RPM) like#15-665, have the following speeds- 3635, 2575, 1355, 725, 395, 280. Includes motor starter and 3-wire lead. Drill head is adjustable 6-1/2" vertically. Drill chuck and the spindle pull handles are NOT included. This machine has a 17" swing. Entire drill press stands about 39" tall overall. This can ... morebe bench or table mounted. We had purchased 3 drill heads in slightly different styles and specifications as this was part of a gang drill set up. Although there are no obvious signs of any known or potential problems that we are aware of. We do not have the means to test it properly, nor do we know anything about its previous history as this was purchased at auction in a large bulk lot form, and so it must be sold as is. Inspections are always welcome and recommended on all used equipment during our business hours with some advance notice. Don't miss your chance to own this professional industrial piece of equipment now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. Due to size and shipping cost. It is expensive and impractical to ship, so we would prefer a local pickup here in Rhode Island. Local sales tax must be charged on local pickups. Inspections are welcome and always recommended before purchasing during normal business hours with advance notice, as this is sold as is. This can also be shipped if the buyer chooses and makes all the necessary arrangemen
|
|
|
Vintage Delta Milwaukee DP220 14" floor model drill press 110V 1/3HP
Delta Milwaukee DP220 14" drill press Vintage 1949 High speed floor model 680-4500 RPM Tilt table 110v~1/3 HP motor Super duty Jacobs geared chuck. Key head. Original paint; other castings sandblasted. Repainted: primed, finish coat Excellent condition $455 Come see it or give us a call with any questions The Tool Consignment Store 560 New Park Ave West Hartford. CT 06110 860-263-7908 You can pick it up or you can get a quote from frieghtquote. com
|
|
|
Delta Milwaukee Rockwell Industrial Floor Drill Press Vintage 1725/1425 RPM
Delta Milwaukee Rockwell Industrial Floor Drill Press Vintage 1725/1425 RPM Used. Guaranteed to work or your money back.
|
|
|
DELTA 17-900 16.5" FLOOR DRILL PRESS INDUSTRIAL WOODWORKING TOOLS
DELTA 16.5" DRILL PRESS CAT. NO. 17-900 BELOW IS SOME INFO I FOUND ONLINE ABOUT THIS MODEL# AND IS FOR INFORMATIONAL PURPOSES ONLY. Capacity: 16 1/2' x 5/8" Drilling Cap. 5/8" Swing: 16 1/2" Table Size Tilting: 12" x 12" Spindle Speeds(12) 250-3.000 Rpm Spindle Quill Taper: 2 MT Spindle Quill Travel: 3 3/8" Column Diameter: 3" UNIT WAS PULLED FROM A WORKING ENVIROMENT AND POWERS UP FINE. BUT ALL CAPABILITIES HAVE NOT BEEN FULLY TESTED, SO AS ALL OF OUR AUCTIONS ITEM IS BEING SOLD AS IS AND ALL SALES ARE FINAL. THE PLASTIC LID ON THE TOP PIECE IS CRACKED ON CORNER AS SHOWN IN PICS. BUT STILL CLOSES. FORKLIFT IS AVAILABLE FOR LOADOUT. FREIGHT CAN BE ARRANGED BY BUYER OR WE CAN ARRANGE AND ADD TO INVOICE AND LOCAL PICK UP IS AVAILABLE. JUST GOT A TRUCK LOAD OF DELTA WOODWORKING EQUIPMENT SO BE SURE ... moreTO CHECK OUT OUR OTHER ITEMS. Check out my other items!
|
|
|
DELTA ROCKWELL 17 INCH DRILL PRESS TABLE RAISING UNIT
Up for Sale is a Delta Rockwell 17 inch drill press table raising unit. Item is missing crank up down handle. The rack has been modified and is not completely original(see pictures) Looks like modification is better than original loop piece that was replaced. Gears are all good and usable. The hardware is all there one screw looks like a replacement and not original also. DP 660 Casting number. Fits 3 1/2" column. This item is in good usable condition. These parts fit the following drill presses and most likely a few others. 17" 1370, 17-205, 17-206, 17-207, 17-208, 17-210, 17-211, 17-212, 17-213. This is the old style DP-600 Z head casting. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part ... moretime seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a fina
|
|
|
Delta Milwaukee 14 inch drill press head casting
Main casting of older Delta Milwaukee 14 inch drill press. No structural issues. Heavy item.
|
|
|
Delta Milwaukee DP 220 14" drill press motor mount DP290
Delta part number DP290 motor mount plate. Removed from a DP220 drill press. Please contact me with any questions.
|
|
|
VERY NICE ROCKWELL DELTA 20" DRILL PRESS MODEL 70-6X0 3 PHASE 208-230/460 VOLTS
SquareTrade © AP6.0 VERY NICE ROCKWELL DELTA 20" DRILL PRESS MODEL 70-6X0 3 PHASE 208-230/460 VOLTS Prev Stop Play Next You are bidding on a Rockwell Delta 20" Drill Press. Model: 70-6X0. T his is a very nice unit in great condition and it is fully guaranteed. 20" Capacity Adjustable Table 3 Phase. 208-230/460 Volts We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery. Any questions? Email us NO RESERVE Please click here to see my other auctions.
|
|
|
15" DELTA ROCKWELL 15-665 BENCH TABLE MOUNT 6 SPEED DRILL PRESS BALDOR 3PH 1140
15" DELTA ROCKWELL 15-665 BENCH TABLE MOUNT 6 SPEED DRILL PRESS BALDOR 3PH 1140. DELTA ROCKWELL#15-665 15" DRILL PRESS BENCH/ TABLE MOUNT Industrial/ Commercial Baldor Motor Jacobs chuck# 3B 5/8-16 with 1/8" 5/8" capacity Made In USA This listing is for 1 used drill press head with column assembly that appears to be in good general overall condition with some normal cosmetic wear. As seen. Newer replaced Baldor electric motor is 1/2HP, 3 Phase, 208-230/460V, 60Hz, 2.5-2.4/1.2A, 1140RPM. Variable speed: six spindle speeds; 3635, 2575, 1355, 725, 395, 280. Includes motor starter and electric junction box. Drill head is adjustable 6-1/2" vertically. Jacobs chuck#3B 5/8-16 with 1/8" to 5/8" capacity. This machine has a 15" swing. Entire drill press stands about 42" tall overall. This has a quick release ... moreturn knob for motor belt tensions, making adjustments very quickly without tools. This can be bench or table mounted. The spindle handles are missing on this. Originally we had purchased a few drill heads in slightly different styles and specifications as this was part of a bench gang drill press set up. Although there are no obvious signs of any known problems or potential problems that we are aware of. We do not have the means to test it properly, nor do we know anything about its previous history as this was purchased at auction in a lot form, and so this must be sold in as is condition. Inspections are always welcome and recommended on all used equipment during our normal business hours prior to any purchasing. Don't miss your chance to own this professional industrial piece of equipment now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. We also have another similar one of these being the same model. It is missing the column post asm. as w we had sold it. Sold separately and great for a backup or spare. If interested please inquire. Thank you. Due to size and shi
|
|
|
Delta DP220 15" Vintage Drill Press, 1/3 HP, 115V, 1PH
Delta 15" Vintage drill press, Cleaned and checked, Model DP 220, 1/3 HP motor. 115V, 1PH, 1750 RPM, Stock Number: B-1-110(w) Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. ... morePAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.
|
|
|
Powermatic 1150 / 1150A Drill Press Part - BODY CAST / HEAD - Rockwell Delta
Powermatic Model 1150/ 1150A Drill Press Part. All parts are in GREAT MECHANICAL working condition and are in VERY GOOD Shape! I Have MULTIPLE Drills i am parting out and have LOTS of EACH part!
|
|
|
ALL ORIGINAL VINTAGE DELTA MILWAUKEE ROCKWELL FLOOR MODEL DRILL PRESS
Great condition. Has original paint and parts right down to the light. Nothing has been added or removed. There is no plug for the light because it was wired direct. Includes Jacobs chuck and chuck key. The table has 3 small divots, no holes from drilling. The only thing it could use is a new belt down the road. The motor is a Delta 1/3 hp. 1725 rpm, 110v, 1 ph
|
|
|
Delta 20" Rockwell 1.5HP Bench Top Industrial power feed drill press 70-6X0
17" Rockwell Industrial power feed drill press. Model 70-6X0 S/N 1635914 GENERAL SPECIFICATIONS Table Type Hand Feed Throat Depth, Drills To Center Of.20" Spindle Speeds, Belt Change. Rockwell Drill Press, 20" Swing, 1.5 HP Motor, 230/460, 3ph, Amps 4.6/2.3, 1735 RPM Comes with Jacobs Chuck Need more Info? email me ross1@charter.net
|
|
|
Refurbished Vintage 1940 Delta Rockwell 17" Drill Press
For sale is a refurbished 1940 Delta 17" drill press. Catalog number 1382 or the later m odel number 17-210. The drill press has a single phase. 3/4 HP Delta Repulsion-Induction motor and is wired to run from a standard 120 volt wall plug. The motor is from 1941 to 1944 and most of the data on the steel motor tag is gone. The drill press has been completely disassembled. Sand blasted, and refinished. All bearings in the motor and drill press have been replaced. The drill press has 0.002" run-out as measured on a bare arbor and the Jacobs 6A chuck has 0.004" run-out as measured on a pin 1.5" down from the chuck. This is the slow speed model with 5 speeds of 385. 600, 935, 1450 and 2240 RPM. The production table has a few hits from drill bits and some thru holes. This is a nice drill press and you won't be disappointed. ... morePS the cart is not included with the drill press.
|
|
|
Delta Milwaukee 14" dp 220 drill press return handle assembly
Up for bid is a delta Milwaukee return handle assembly off of a DP 220 14" drill press. Handle is in great condition and will shine up nicely. Please ask questions before bidding. Thank you.
|
|
|
Delta 17" drill press Thrust bearing
Delta 17" drill press Thrust Bearing
|
|
|
Delta Multi Drill Press Model 32-235
Delta Multi-Drill Press Has Measured Table Top. Comes with wooden stand. Electric Motor: Delta 438-02-314-2086. 1725 RPM, 11.4 amp, 60HZ. 120V Single Phase 3/4 HP!If you are Interested Please Message Me Your Address Including Zip Code And I Will Give You an Accurate Freight Quote! Large. 16-inch x 29-3/4-inch table provides a full 12 inches of work space in front of the boring head for boring extra-large boards Fully-adjustable table and fence assembly features easy-to-read English and metric scales for quick set-up and accurate boring, Indexing pins help operator to maintain correct spindle alignment for resuming line-boring operations in long work pieces, Work stops on either end of the fence allow operator to line up work from the left or right for performing parallel boring patterns, Adjustable depth stop controls the downward travel ... moreof boring head, Heavy-gauge. Sheet steel support structure has a sturdy steel base with holes for bench or stand mounting, Powerful 3/4 HP motor delivers plenty of power and speed for multiple hole boring even in the toughest laminates, Large-capacity. 13-spindle boring head comes with a see-through spindle guard for safety, Telescoping handle. Featured on No. 32-325, extends from 16-23 inches for increased leverage when needed and retracts when not in use, 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ed7fdd9a9-0x105-
|
|
|
DELTA 20-950 20-Inch Variable Speed Drill Press 20" w/ Manual
WE ACCEPT ALL MAJOR CREDIT CARDS Please call us for Direct Payments: 818) 241-2265 Office Hours are Mon-Fri 9am-6pm and Saturdays from 9am-2pm We are located at 4587 Brazil St. Los Angeles. CA 90039 Local Pickup is also Welcome! DESCRIPTION Delta 20” Floor Drill Press This unit was tested and found to be in excellent. Fully functioning order. Cosmetically, it is in great condition with normal signs of use. The Drill Press comes with its Manual. Please see my pictures for more details on the cosmetics of the item for sale. Part No. 20-950 ~ Information taken from the Manufacturer’s Website ~ OVERVIEW The 20-950 20-Inch Variable Speed Drill press boasts a large woodworker's table(24 by 14 inches) for added stability of the workpiece and the ability to perform multiple angled drilling. The wooden insert in the table can be removed for larger ... morecapacity drilling. Comes standard with an integrated task light for improved visibility. A 1 horsepower induction motor for added power, and a 3-jaw, 5/8-inch capacity chuck for positive gripping of various drill press cutting tools. The 6-quill stroke provides plenty of depth capacity for multiple applications. PRODUCT INFORMATION Technical Details Item Weight 329 pounds Product Dimensions 62.3 x 31 x 25 inches Item model number 20-950 FEATURES Heavy duty 1 hp motor for demanding drilling; redesigned base for added tool stability Quick-adjust depth stop Cast-iron head to provide smooth drilling with minimal vibration Large. 24 by 14-inch woodworker-foots table Weighs 286 pounds and stands 74-1/2 inches tall_ Shipping: Due to the size and weight of the item. We are offering LOCAL PICK UP or FREIGHT SHIPPING- Please email us for freight shipping estimates- We ship worldwide! Salesbaron is in Los Angeles. 90039 SL PAYMENTS We accept PayPal and all major credit cards. Please contact us for direct credit card payments. Note: There will be a 9% sales tax to buyers in California. SHIPPING Packages are us
|
|
|
DELTA DP300 12" BENCH DRILL PRESS 5 SPEED
This is a 12" Delta bench drill press model# DP300. It has 5 speeds and a 1/3 HP motor. It was used by a home owner for small projects around the house. It is in excellent used condition. It comes with the owners manual and parts breakdown diagram. Please ask all questions before bidding.
|
|
|
Delta Rockwell 15-650 Drill Press Pulley Cover
Pulley cover off of a Rockwell Delta 15-650. Shipping to lower 48 US States only. Paypal only. Shipping will be USPS Priority Mail Flat Rate. I am not an expert on drill presses but please ask any questions and I'll try my best to answer them. Thank you.
|
|
|
Delta 17-900 16-1/2" 12-Speed Floor Drill Press
Technical Details Part Number 17-900 Item Weight 194 pounds Product Dimensions 25.2 x 12.8 x 66 inches If your projects require you to drill with big bits or if you find yourself attempting to drill with precision under questionable circumstances. This heavy-duty 16-1/2-inch drill press from Delta will help you get out of your, um, hole. Running off a 3/4-horsepower motor that can be wired for either 115 or 230 volts, it gives you an impressive deep plunge length of 3-3/8 inches and holds up to 5/8-inch-diameter bits. Solid cast-iron construction and a 3-1/8-inch column give it the industrial feel and durability we look for in this type of tool. You'll enjoy the rotating work base-which bevels, of course, 45 degrees each way for drilling angles-as well as the depth stop that can be set quickly and easily with micro adjustments and a locking ... moremechanism, great for repetitive drilling. While other models sometimes place hard-to-read speed and belt charts under the top cap, Delta uses a wide, clearly legible chart to explain how to configure the belts for each of 12 speeds(250 to 3,000 rpm) And, thanks to the smooth, cool-running induction motor inside, you're not likely to find yourself shopping for a drill press again for an extremely long time. Posted with
|
|
|
Delta 14-040 Drill Press + Drill Chuck + NO RESERVE
Manufacturer: Delta Model: 14-040- Drill Press Drill Chuck Included! Serial: R9116 Condition: We do not know the working condition of this machine. We do know it was being used at the school in which it's located until they stopped using it and declared it as surplus. There is an arm missing from this machine. Does not affect the operation of driving the drill head down. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME ... moreOF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th AND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. HP: 1/2 R.P.M: 1720 Electrical: 115/ 230 V 1 PH*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items are being sold for Holland Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Delta / Rockwell 17-430 - 17" Drill Press + NO RESERVE!
Manufacturer: Delta/ Rockwell Model: 17-430 17" Drill Press Drill Chuck Included! Serial: 83A77029 Condition: We do not know the working condition of this machine. This machine is being sold for a school. It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME OF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th ... moreAND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. This is a drill offered by Delta/ Rockwell. Perfect for the home or office. Swing(in) 17 Drilling Capacity(in) 5/8 Chuck Size(in) 1/2 Table Size(in) 11" x 14" best guess) Electrical: 115 Volt 60 Hz 1 PH Dimensions: best guess) Length: 25" Width: 22" Height: 75" Weight: 400 lbs*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items being sold for Highland Park Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your act
|
|
|
Delta / Rockwell 15-665 - 15" Drill Press + NO RESERVE!
Manufacturer: Delta/ Rockwell Model: 15-665 15" Drill Press Drill Chuck Included! Serial: 1455188 Condition: We do not know the working condition of this machine. This machine is being sold for a school. It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME OF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th ... moreAND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. This is a drill offered by Delta/ Rockwell. Perfect for the home or office. Swing(in) 15 Drilling Capacity(in) 5/8 Chuck Size(in) 1/2 Table Size(in) 11" x 14" best guess) Electrical: 115 Volt 60 Hz 1 PH Dimensions: best guess) Length: 25" Width: 22" Height: 75" Weight: 400 lbs*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items being sold for Highland Park Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your acti
|
|
|
DELTA MILWAUKEE DOUBLE DRILL PRESS STATION
Item Information Item Name: DELTA MILWAUKEE DOUBLE DRILL PRESS STATION Item# 10414 Price/Each: $499.00 Year: Brand Name: DELTA MILWAUKEE Model: Serial# Asset Tag: A4518 Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description DELTA MILWAUKEE DOUBLE DRILL PRESS AND TABLE 3" QUILL 1/2 HP EACH UNIT 1725 RPM 220 VOLT 60 Hz 3 PHASE DIM: 76"H x 48"W x 30"L Contact Us About This Machine Should you have questions. Please contact David Drozdenko at 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire ... morepayments. Credit card payments are to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork,
|
|
|
Delta DP 220 14" drill press high speed and low speed pulleys
Up for bid is the high speed and low speed pullys off of a delta dp220 14" drill press. They are both in good shape but dirty. The high speed pully has a couple very minor bends in the fins but nothing that would mess with the functionality of the pulley. There are no cracks or breaks in the pulleys. These are just for the spindle. Not the motor. You would need to find the motor pulley. I am not sure if they used the same pulley for the motor for high and low speed. Please ask questions before bidding. Thank you.
|
|
|
Delta Milwaukee 14" DP220 drill press base for stand alone press
Up for bid is the cast iron base off of a Delta dp 220 drill press. This is the stand alone type. Not the smaller bench top type casting. Item is in good condition. There is one blemish I assume from the original casting. It is shown in the second picture. It is a small hole that goes through to the inside. There are no cracks around it or sign of damage so I am pretty sure this is from the original castin and could be filled easily. It weighs about 50 pounds, hence the shipping cost. Please ask questions before bidding. Thank you.
|
|
|
DELTA 8" DRILL PRESS - MODEL 11-900 - BENCH TOP + DRILL BIT SET
DELTA 8" BENCH TOP DRILL PRESS(MODEL 11-900) IN VERY GOOD CONDITION. I WILL ALSO INCLUDE A USED SET OF TITANIUM COATED DRILL BITS. THERE ARE A COUPLE SMALL BITS MISSING. SEE PHOTOS FOR ACTUAL ITEMS YOU WILL RECIEVE. PLEASE ASK QUESTIONS BEFORE BIDDING AS ALL SALES ARE FINAL. DUE TO THE WEIGHT OF THIS ITEM. THIS IS A LOCAL PICK-UP ONLY LISTING. I WILL NOT SHIP THIS ITEM. PAYMENT CAN BE MADE BY CREDIT CARD THRU PAYPAL OR BY CASH WHEN ITEM IS PICKED UP. THE ITEM WILL BE RELEASED UPON PAYMENT VERIFICATION THRU PAYPAL OR WHEN I RECIEVE THE CASH. THANK YOU!
|
|
|
Delta Rockwell Metal Drill Press, Model 15, 3 Phase
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Delta Rockwell Metal Drill Press. Model 15, 3 Phase Item Description: This is a Delta Rockwell Drill Press. Model 15. FEATURES: from the manufacturer&146s plate) Model: 15, Power: 3/4 hp, Power Requirements: ... more230/480v. 3.0/1.5 amp, Speed: 1725 RPM, Table Size: 11" x 14" Unit powers on. But was not tested for functionality. Notes: Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Richmond CA. 94803 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 33961) nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Additional Information: Chuck Size: unknown Table Size: 11x14 Motor HP: unknown Power Requirements: 208-220 Volt 3-Ph Item Tested? Item passed power on test no other functions tested , nbsp, Sales Tax: PLEASE NOTE: If you pay immediately at the end of auction using the eBay payment method please
|
|
|
DELTA ROCKWELL 17" DRILL PRESS QUILL CLAMP DP-600
Offering a quill clamp casting for a Rockwell Delta 17" Drill press This fits the 17" drills with DP-600 head casting This will not fit the later style 17" drills such as the 17-400 or 17-600 series Any questions: Or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
|
|
|
DELTA / ROCKWELL DRILL PRESS HEAD 4 BOLT MOTOR MOUNT
DELTA ROCKWELL DRILL PRESS PART MODEL# 15-000 THRU 1600. MAY BE SOME SURFACE RUST ON SOME ITEMS FROM LAYING AROUND THE SHOP NOTHING MAJOR. THIS IS A USA MACHINE NOT THE TAIWAN VERSION! NEWER STYLE WITH FOUR BOLT MOTOR MOUNT!
|
|
|
Oliver table saw Oliver planer Oliver jointer Delta drill press
Manufacturer: Delta/ Rockwell 15" Drill PressDrill Chuck Included! Condition: I do not know the working condition of this machine but motor turns on and sounds ok This machine is being sold'as is' It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. This item is used and sold as-is. This item was not tested for operation. It was removed from an operating environment and placed in storage. I can not verify operational status. May need service and/or parts to make fully operational.NOTE: THIS LISTING IS ONLY FOR THE DELTA ROCKWELL DRLL PRESS. PICK UP ONLY, CASH ONLY OR USPS MONEY ORDER"NO PAYPAL, ONLY ACCEPTING PAYPAL IF YOU PAY THE FEES. Interested in starting your own cabinet shop! I have all the machinery needed, please see my other items. The current pictures ... moreon the post are the best that I could get because the container(Size 8' X 20' is so full that I can barely move inside. We can set up an appointment for you to see items in person. Thank you. This item is used and sold as-is. It was removed from an operating environment and placed in storage. NOTE: SHIPPING is NOT AVAILABLE for this item- LOCAL PICKUP ONLY. Due to the location of this item, this item can not be shipped. The item can be prepared for pickup. Item must be removed AS-IS. Buyer must pickup at location and must be prepared to remove the item at their cost and with their own resources.
|
|
|
Rockwell Delta 20 In Drill Press, Model 70-400 INDUSTRIAL
Drill Press Rockwell Mfg 1HP 3 Phase- Commercial shop Drill Press-Rockwell Mfg Co. Model A1002-566-5171-SC-9341 1HP 3 Phase. 60 cycle Frame 125C Temp Rise 40 C Mfg by Kingston-Conley Inc I also have a brand new Gentec converter for 110 volt use cost me $250.00. This drill press weights 450 pounds and is a vintage from the 80s. The new ones sells for $3600.00 and does the same job. The difference is that this one is made is USA! I got this drill from my father. The reason im selling its because I have no use for and is taking space. Unit is in storage in Port Saint lucie and I can take to you if you dont have a truck if you are around 50 miles from port saint lucie but make sure you want! Asking $850.00 Call Mario at 9544482064 Please do not waste our time. Best regards! Location: port saint lucie•it's NOT ok to contact this poster with ... moreservices or other commercial interests Posting ID: 3861720589
|
|
|
Clausing 1784 Benchtop Drill Press Vintage Variable Speed Chucks Delta Rockwell
Clausing Model 1784 Bench Top Drill Press This machine is in very good condition. Included in this auction is 3 spare chucks. Shipping will vary on your location. Local Pick up is always welcome. IF YOU USE BUY IT NOW. SHIPPING IS FREE!
|
|
|
Delta 17-900 Variable Speed Drill Press
Delta 17-900 Variable Speed Drill Press Specifications Cat# 17-900 Serial# R8942 Hp: 3/4 Volts: 115/230 Rpm: 1720 Phase: 1 Hz: 60 For more information contact Carlton Carr at(843) 845-7433 or at carlton.carr@essindustrial.com We ship anywhere your freight handler or carrier. FOB Spartanburg SC 29303 MacDB# 2290 SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: RBI ESS accepts Bank Wire(Transfer) Money Order, PAYPAL, Certified Checks, Credit Card(3%Processing Fee) and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships worldwide and uses all common carriers including USPS. DHL, FEDEX, UPS and truck freight. When requested RBI ESS will combine multiple orders to reduce shipping costs, if possible. LOCAL PICKUPS ... moreREQUIRE PAYMENT OF LOCAL SALES TAX, UNLESS EXEMPTION IS PROVIDED. Contact us@ 864 444-4348 or email for special shipping instructions or for scheduling a pick up at our location in Spartanburg SC. USA. RETURN POLICY: Our goal at RBI ESS is to please our customers. We do our best to describe each item accurately. If an item arrives damaged or incorrectly described. We will work with you to resolve the situation. Any item damaged or incorrectly described that is returned must be returned within 7 days of receipt or no refund will be granted. Any refund given will be less all shipping costs. If there is a problem, please call us@ 864 641-7458 or email. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13f43061489-0xf2-
|
|
|
Delta 14-070 14" Drill Press
For auction. A Delta 14-070 drill press, in good working order. Posted with
|
|
|
1945 Delta Rockwell 14" Drill Press
For sale is a nice 1945 vintage Delta 14" drill press. Catalog/model number 17-207. This is the slow speed model with 4 speeds of 470. 780, 1300 and 1950 RPM. The drill press has a single phase. 1/3 HP Delta Repulsion-Induction motor and is wired to run from a standard 120 volt wall plug. The motor has new bearings and has been repainted. The drill press has the original finish that is little tired. I.e. some rust is visable on the surface. The spindle bearings are in good condition. New cord. Switch and belt installed. The drill press has 0.002" run-out as measured on a pin 1.5" down from the Jacobs 6A chuck. The table has a few marks, but no drill bit thru holes. PS the cart is not included with the drill press. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13f687b8257-0xd9-
|
|
|
Vintage DELTA ROCKWELL DP 220 MORTISING SPINDLE 280 Drill Press
Vintage Delta Milwaukee 161/4" mortising spindle from a DP 220. 1/2" bore. In great shape. Posted with
|
|
|
Delta Rockwell Drill Press Single Spindle 17", 12"x 11" Tilting Table (24610)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 24610. 17" Delta Rockwell Spindle Drill SERIAL NUMBER: 53-9899 GENERAL SPECIFICATIONS Floor Model Spindle Speeds. Variable: 300 to 2000 RPM Tilting Table 12" x 11" Base Surface: 13 1/2" x 9 3/4 machined base Quill Stroke: 4 3/4" Table Rising mechanism EQUIPPED WITH 1 HP Motor. 1725 RPM 220/60/3 Manuel Push Button Start No. 2M.T. Approximate Weight: 200 Lbs. Shipping Dimensions: 26" x 30" x 68" Tall F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood ... moreMachinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the
|
|
|
Delta milwaukee 14 inch drill press depth marker
As shown. Came from a 14 inch Delta Milwaukee drill press
|
|
|
delta milwaukee 14 inch drill press return spring
Works fine. Came from a 14 inch delta milwaukee drill press
|
|
|
Vintage Delta Milwaukee Drill Press Head Motor Assembly
This is a genuine Delta Milwaukee Drill press head assembly with motor as shown. The stand is not included. The stand shaft opening is 2 3/4" The unit is in excellent cosmetic and operating condition and has been refinished. Just a few scuffs in the paint. No cracks or breaks and the belt and wiring is very good. Includes chuck with key on a chain. Thank you! ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13faa556a1f-0x104-
|
|
|
Rare Vintage Rockwell Reciprocating File Saw Drill Press Head Delta
I do not know specifically what machine/unit this was made for but it is a Rockwell Reciprocating head model TAB-169. It has a 5/8" shaft and is set up with a Nicholson file bit currently. The bits are interchangeable of course and a saw or other bit could be used. Measures about 8"x8" not including the bit and is all metal. It works but I have not run it on a machine. There is an oil filler screw on the side with gasket so I assume the case is meant to be oiled although I do not have specs on it. If it is run without oil and burnt out. No returns. Thank you!
|
|
|
DELTA ROCKWELL 17" DRILL PRESS MOTOR MOUNT FOR EARLY 17
Offering a motor mount for a 17" Rockwell Delta drill press This fits the early style 17" drills with DP-600 head casting# Good shape. No extra holes or damage Any questions: e-mail. Or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
|
|
|
13" Delta Drill Press 1 Phase 110/220 Volts 1725 RPM
13" Delta Drill Press We believe the motor is faulty; however. This machine includes many functioning parts. If you are only interested in the parts. We can send some for a minimum order of $125. Overall dimensions: 24" x 12" x 41" Delta motor information: RPM: 1725 Volts: 110/220 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used ... moreon truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidd
|
|
|
Delta Rockwell Milwaukee 1/2 HP 1725 RPM Motor Lathe Drill Press Shaper Jointer
DELTA ROCKWELL MILWAUKEE 1/2 H.P. MOTOR FROM A MODEL 1460(46-305) 12" WOOD LATHE. 1725 R.P.M. 3/4" DUAL KEYED SHAFTS. DUAL VOLTAGE 115/230 VLOT MOTOR CURRENTLY SET ON 115 VOLTS. 7.0/ 3.5 AMPS FRAME 171 THIS HEAVY DUTY MOTOR COMES WITH 4 STEP PULLEY. SHAFT GUARD/CONDOM AND ORIGINAL SWITCH AND WEIGHS APPOX. 45 POUNDS. THIS MOTOR WAS MADE IN THE USA BY MARATHON ELECTRIC FOR DELTA MANUFACTURING. THIS MOTOR SHIPS TO THE LOWER 48 STATES ONLY. I AM ALWAYS WILLING TO COMBINE SHIPPING WHEN POSSIBLE. Will be parting out Vintage Delta 12" Wood Lathe Model Number 1460 Including all parts. Original motor and legs. All parts are in GREAT Shape. If you need any parts please message me. Using the"ask a question" function.
|
|
|
Drill Press Delta 15" Floor Model W/ 15" x 21" Production Table ,115 V, Nice !!
Thanks For Taking The Time To Visit And Consider Our listing.It's Very Much Appreciated! Important Bidding/Buying Information Related To This Listing; We Have Done Our Best To Describe It In Detail;However. This Is A Used Item And In Our Opinion A Good One;However, Opinions Can& Will Differ On Occasion And Because Of This We Ask That You Be 100% Sure You Know What Your Buying& What To Expect When It Arrives Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit& Inspect It Yourself In Person;However.Should This Not Be Possible Or Practical Please Review The Photos& Ask As Many Questions As Possible So You Know What To Expect When It Arrives! Notice; This Has Been.Inspected And Tested For It's Function Only.We Can Not& Do Not Determine If It Meets Any And/Or All Safety Issues ... moreAnd/Or Concerns With Regards To The Machine, It's Installation,Operation& Safe Guarding. Any And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above Machine Details& Specifications(1) Pre-Owned 15" Delta Floor Model Production Drill Press Model# 15-270 Specifications: Motor: 115 Volts.1 Phase, 3/4 HP• Column Diameter: 2-3/4"70 mm) Table Tilt: 90° L and R• Quill Stroke: 6" 152 mm) Quill Diameter: 2" 51 mm) Speeds: With 1725 RPM motor: 450 to 4700 RPM With 1140 RPM motor: 300 to 3100 RPM• Table Size: Standard: 11" x 14" 279 x 356 mm) Production(overall) 15-1/2" x 21-1/2" 394 x 546 mm) Production(inside of coolant trough) 12" x 18" 305 x 457 mm) Key Chuck Capacity: With Std. Jacobs#33 taper) 1/2" 13 mm) Height: 71-1/2" 1816 mm) Length: 27-7/8" Width: Tilting Table: 15-1/2" Weight: 283 lbs*RUNS GREAT! Important Safety Notice.There are no safety devices or E-stops on this machine and there are no safe guards to protect the operator.Upgrades are required and should you purchase this your ass
|
|
|
Rockwell / Delta 20" drill press 70-6X0 ***** HEAD ONLY ******
230V/460V 3phase 1 1/2 HP Motors- 1735rpm 20” Height Capacity Variable Speed Drive This machine is owned and was used by a small prototype shop. Lack of use and need for space are reasons for sale. Unit on the right side has missing"head travle" crank but spindle up/down works fine. Besides that it was functioning properly when it was disconnected. Please feel free to ask any questions and I can also email more photos if needed. There is a $300.00 security deposit due within 72 hours of the close of the listing. This can be paid with paypal. Certified check, or cashiers check. The full balance is due upon pick-up in cash, certified check, or a cashiers check from your bank that must clear before pick-up or shipping. We do not accept full payment with Paypal. This machine is being sold AS-IS. This item must be shipped by freight. ... moreBuyer responsiable for all shipping cost(we do have fork lift) Please feel free to ask questions and I will do my best to answer them. I can also email more photos. Thank you
|
|
|
Delta Rockwell Milwaukee 14" Drill Press Depth Index Pointer DP-220 Head Casting
DEPTH INDEX POINTER FOR A DELTA ROCKWELL MILWAUKEE 14" DRILL PRESS WITH A DP-220 HEAD CASTING. I AM ALWAYS WILLING TO COMBINE SHIPPING WHEN POSSIBLE. Will be parting out a Vintage 14" Delta drill press including all parts. Retirement light and original motor. If you need any parts please message me. Using the"ask a question" function.
|
|
|
Vintage Delta Rockwell Drill Press Pulley Belt Guard
Vintage Walker Turner Drill Press Pulley Belt Guard. As is. It will need a wipe down& is ready for mounting. It came from a 15" DP. You will have to check to see if it mounts to other units. Thanks for taking the time to review my auction.
|
|
|
DELTA 16 1/2" FLOOR VARIABLE SPEED DRILL PRESS MODEL 17-925 (OC105)
Up for Sale! DELTA 16 1/2" FLOOR VARIABLE SPEED DRILL PRESS MODEL 17-925(OC105) SPECIFICATIONS: MODEL: 17-925 SERIAL# J9853 HP 3/4 RPM: 1725 VOLTS 115/230 SINGLE PHASE Drill press is in good working condition- You can preview and inspect minipress at our facility in Huntington Beach. California. We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. CALL. TEXT OR EMAIL WITH QUESTIONS. 714)658-5390 FREE LOADING IN ALL PURCHASES SE HABLA ESPAÑOL Visit our eBay store www.orangecountymachinery.com/ ph 714 658 5390
|
|
|
*DELTA Milwaukee* ~ 14" Drill Press Multi-Speed Attachment~ with Spindle Pulley~
Here's a Vintage DELTA Milwaukee Multi-Speed Attachment for 14" Drill Presses It's an optional attachment for drill presses which can be used with with either the Slow speed spindle pulley(the big one) or the High speed spindle pulley. The motor(drive) pulley is the same in either case. You would get this attachment with two V-belts. The only difference between the No.1028 model and the No.1029 model was the length of the belts. The V-belts are Not included in this listing. In the upper left of the diagram it says: Foot feed bracket may be cut off. If not used. Apparently the original owner did just that. Having that minor modification does not. However, affect the functionality of this part in any way. As you can see. In the diagram, adding this attachment to your 14" drill press gives you the option of 12 speeds versus ... more4. In this listing. In addition to the Multi-Speed attachment, I am including your choice of 1 of the Spindle pulleys. You can have EITHER the Slow speed. Or High speed pulley. you already have one on your drill press. So my suggestion is that you pick the pulley that you don't already have; but it's up to you. Just email me. And I'll include the one you request in the shipment. Thus outfitted, you will then have 24 optional speeds available to you with your 14" Delta drill press. see diagram for list of speeds) Both the Multi-Speed attachment and Spindle pulley are in Great Working Condition! Let me know if you've got any questions. 14-Day Return Free Shipping! Thanks!
|
|
|
ANTIQUE DELTA Drill Press U.S. NAVY
It is an old Delta Drill Press that I found when I bought a house. On it. There are a few numbers and tags. One states U.S. Navy Property N.I. No. 91530 as well as ooo688 and serial number 19/7408. Another has U.S. Gov. Property and contract# AF 33(600)36923 and ID# 000583. I have no use for it. It works. Shipping is available through freight paid by buyer or you can pick it up.
|
|
|
Vintage New-Old-Stock 1951 Delta Rockwell 17" Drill Press
For sale is a New-Old-Stock 1951 Delta 17" drill press. I purchased this from the Grandson of the original owner who had inherited it. This drill press was stored in his Grandfather garage for 62 years and never setup and operated. The"As-found condition photo" links below show the condition of the drill press when I purchased it and there is no dought in my mind that this drill press was never put in to service. Since most of the drill press was stored in the open air some refurbishment was need to put it into service. As noted above this is a 1951 Delta 17" drill press and its m odel number 17-210. This is the slow speed model with 5 speeds of 385. 600, 935, 1450 and 2240 RPM. It has the large production table, a MT-2 spindle nose and a Jacobs 6A chuck. The drill press has a single phase. 3/4 HP Delta capacitor start ... moremotor that will run on 110 or 220 volts and is currently wired to run from a standard 120 volt wall plug. The drill press has been completely disassembled and the rust removed from the bare metal surfaces. Dried oil& grease removed, and about 90% of the rust removed from the painted surfaces. The original finish was retained with all its faults and refinished with two coats of matte clear. So the drill press has a lot of charactor, so you will see some bare metal and some rust along with the gray paint under the clear finish. The work table has some light pitting and the Jacobs chuck sleeve also has a little pitting. The column has has some scratches, but no noticable pitting. The pot-metal knobs and handles have some bubbling under the chrome plating. All 4 bearings in the drill press spindle were replaced since the factory install bearings had dried out and were unusable. The motor bearings were good and surprisingly the cord was also good. A new belt was also provided. This is a nice drill press and you won't be disappointed. If you would like to inspect the drill press before biding or making an offer drop me an email to arange a time to come kick the tires. PS the c
|
|
|
VINTAGE DELTA ROCKWELL MODEL 11-100 DRILL PRESS (WORKING CONDITION) 1950S
VINTAGE DELTA ROCKWELL MODEL 11-100 DRILL PRESS(WORKING CONDITION) THIS DRILL PRESS IS IN WORKING CONDITION. BUT NEEDS MAJOR TLC. I THINK THIS DRILL IS FROM THE 50S. WOULD BE A GREAT RESTORATION PROJECT FOR SOMEONE THAT WOULD PUT TIME INTO IT. IT LOOKS LIKE ALL THE PARTS ARE WITH THE UNIT. BUT DON'T KNOW ENOUGH ABOUT THIS OLD DRILL TO BE SURE. I WILL NOT SHIP. THIS IS FOR LOCAL PICK UP ONLY. NORTH JERSEY/ NORTH ARLINGTON, KEARNY) NJ AREA THIS UNIT COMES WITH NO WARRANTY. WILL DEMONSTRATE UPON LOCAL PICK-UP. BUYER BUYS AS IS CONDITION
|
|
|
Vintage 1955 Delta Rockwell 17" Drill Press Do-It-Yourself Project
For sale is a 1955 vintage Delta 17" drill press DIY project. Model number 17-210. This is the slow speed model with 5 speeds of 385. 600, 935, 1450 and 2240 RPM. It has the MT-2 spindle nose with a Jacobs No. 34 chuck. The motor single phase. 1/2 HP Delta motor and is wired to run from a standard 120 volt wall plug. The motor bearings are good. It has the push-pull start rod compatible switch, just slip on the pulley and bolt it on, its ready to go. As I noted this is a Do-It-Yourself project machine. I have inspected the drill press and there are no missing or broken parts. What was missing or broken has been replaced or is sitting on the table in the pictures. There are 4 new bearings for the spindle included. The spindle turns freely now and if you don't want the bearings you can take $90 of the asking price. Just note that your ... moreoffer is without bearings. I have set this up as best I can for you to be successful rebuilding a vintage drill press for your workshop. Paint it. Clean it, polish it, etc. as you see fit. PS the cart is not included in the sale.
|
|
|
DELTA ROCKWELL 17 INCH DRILL PRESS RETURN SPRING AND HARDWARE
Up for Sale is a Delta rockwell 17 inch drill press return spring with hardware. Item is in good usable condition. The cap cover is missing. These parts fit the following drill presses and most likely a few others. 17" 1370, 17-205, 17-206, 17-207, 17-208, 17-210, 17-211, 17-212, 17-213. This is the old style DP-600 Z head casting. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine ... moreparts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect t
|
|
|
DELTA MORTISER DP 330 DRILL PRESS AND 3 MORTISING CHISELS 1`/4''-3/8''-1/2''
Up for auction is a Delta DP330 with 3 square mortising chisels and a maple fence. There is some rust. The chisels are in used condition.The 1/2' is Greenlee the 3/8' is Delta and the 1/4' is Woodworkers tool works.Please ask questions before bidding. Payment is due 7 days from closing.Thanks for looking.
|
|
|
DELTA 14" MULTIPLE SPEED DRILL PRESS HEAD
aims DELTA 14" MULTIPLE SPEED DRILL PRESS HEAD read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Delta Machinery. This is a Multiple Speed Pedestal Drill Press Head. Unit does not respond to power. Selling AS-IS for parts or repair. To the best of my knowledge. The specifications I've provided are correct but please verify or inspect machine first hand. The machine can be inspected by appointment. Unit is being sold as is and our normal return policy does not apply. Specifications: Throat: 7" Swing: 14" Quill Depth: 4" Column Diameter: 2-3/4" Column Height: 30" Overall Dimensions: 23" x 12" x 31" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently ... morehas a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DELTA 14" MULTIPLE SPEED DRILL PRESS HEAD DELTA 14" MULTIPLE SPEED DRILL PRESS HEAD DELTA 14" MULTIPLE SPEED DRILL PRESS HEAD DELTA 14" MULTIPLE SPEED DRILL PRESS HEAD Reliable Tool Inc. c 2011 | Powered by
|
|
|
Vintage Delta Rockwell Drill Press Pulley Cover Belt Guard
Vintage Delta Rockwell Milwaukee Drill Press Pulley Cover Belt Guard. As is. It will need a wipe down& is ready for mounting. It came from a 15" DP. You will have to check to see if it mounts to other units. Thanks for taking the time to review my auction.
|
|
|
Vintage DELTA MILWAUKEE 14" DRILL PRESS DP220 Spindle KEYLESS GRIP CHUCK
I will be listing an awesome 1946 DELTA MILWAUKEE ROCKWELL Floor Model Drill Press this evening as well as a nice variety of ACCESSORIES including SPINDLES. CHUCKS. PULLEYS. MORTISING ATTACHMENTS. And more so please see all of my Listings. I do offer combijned shipping! For your bidding consideration in this auction is the following Torque Tool or accessory: LOT# 7 ITEM: Delta Milwaukee Drill Press DP220 14" Spindle WITH A Keyless Chuck Attachment on it. DESCRIPTION: This item was found in a Box marked"Delta DP220 Drill Press Accessories" and is being sold as such. And as-is, so please view photos and ask questions. MEASUREMENTS: The spindle is 5/8" diameter and it measures 17" long overall. The Chuck measures 2" in diameter and 3 3/4" long. CONDITION: Used but in very nice cosmetic and working condition. ... morePlease note. I closed the chuck for the photo but have not been able to re-open it. I am not familiar with this vintage Chuck so if anyone knows the key to re-opening it please let me know and I will report the results. SELLERS TRADE PRACTICES: I want your Bidding and Purchasing experience with me to be a satisfactor y one in every way. I have provided a few thoughts below to help you understand my practices and what has proven to work successfully for me and over 5000 of my customers in ensuring an above satisfactory transaction here on Ebay. Please let me know if you have any questions or comments! FEEDBACK: I gladly provide POSTIVE FEEDBACK once our transaction has been completed to your satisfaction and I have recieved your Positive Feedback. PAYMENT: I accept Paypal payment and you should pay for your items within 4 days of the Auction close. I use Ebay's system for payment reminder and notification. LISTING/ ITEM DESCRIPTION: Please ask questions- I try and describe items as best I can. And add corresponding Photos, but I don't always know what may be important to you. RETURN POLICY: I accept returns for full refund within 7 days of the auction close date if your
|
|
|
Rockwell 15-66 Benchtop Drill Press Variable Speed Delta Will Ship 3/4 HP 115v
Industrial ROCKWELL model 15-665 VARIABLE SPEED controlled BENCH TOP 15" 115/230 volt(presently wired for 115volt) 1725 rpm 3/4HP motor Very good condition for it's age(probably 1970's) was used only in a high school tech program. Will stretch wrap and place on skid for shipping. For no additional charge. Will deliver locally(15 milesof 06111) for free.
|
|
|
Rockwell Delta Drill Press Swivel Tilt
Nice swivel and tilt.CA tax for CA res Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-140860d24e1-0x102-
|
|
|
RARE DELTA MILWAUKEE DRILL PRESS TABLE OR HEAD LIFT
This allows for lifting the tabl and lowering/raising the head on a Delta Milwaukee 13" drill press or any press with a 2 3/4" diameter column. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14088b211d9-0x103-
|
|
|
Delta Rockwell Drill Press Top Pulley Housing DP220 NICE!!
This came from an estate sale. It appears to be in excellent condition with no broken pieces. It stands roughly 16 1/2" tall.
|
|
|
Delta Rockwell Drill Press 17" U.S.A. Variable Speed Single Phase
This is a U.S.A. made 17" Rockwell drill press on a mobile base for sale. It has a 1.5 hp motor. 120 volt, single phase and is a variable speed machine. Very nice condition floor model. I have added a custom slow speed attachment for drilling up to 1" in soft steel. Number 2 morse taper spindle with the drill chuck and key included. This unit runs quiet, no vibration, smooth speed changes. I am downsizing my operation and have a Bridgeport and another drill press, this one offered for sale. See my other items. Please see pictures. Free delivery within a 100 mile radius of Terre Haute. In. Buyer pays all truck shipping fees if shipped.
|
|
|
Vintage Drill Press Hub & Handles, Delta Rockwell, Homecraft Craftsman Atlas ???
Vintage drill press handles and hub. I have not been able to figure out exactly what machines these go to. One is gray and looks like saturn. It is 7" long x 3/8" diameter shaft. One is maroon colored and round. It is 6 1/2" long x 3/8" diameter shaft. The hub is 2" in Diameter with a 3/4" hole. It holds 3 handles and has a set screw. These are obviously old and used. Please look at photos carefully before bidding. Handle shafts have light surface rust that I think would cleanup nicely. I will answer any questions asap. Thanks for looking! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14135241e3e-0x105-
|
|
|
Delta Mortising attachment tool model 17-905 with chisel & bit for Drill press
This is a Delta Mortising attachment tool model 17-905 for use with all 14" drill press. Included is a chisel and drill bit. Tool is in excellent shape. MADE IN U.S.A. I accept Paypal. Cashiers checks for immediate shipping. Personal checks must clear prior to shipping. I always post feedback upon receive of your feed back. If you have a problem please e-mail me before posting feedback. Thank you for bidding. Please look at my other auctions. Check my feedback and bid with confidence.
|
|
|
Delta 16-1/2" Floor Drill Press Cat. No. 17-900 17", 115V, 1Ph
Delta 16-1/2" Floor Drill Press Cat. No. 17-900 General Info: Stock# GS-713-1024 Condition: Used Tested: Yes. Good working condition Brand: Delta Model:17-900 Serial: R 9121 Year: N/A Unit Dimensions: 66" H x 30" D x 18" W Unit Weight: 200Lbs Location: Stone Mountain. GA Specifications: 16.5" Swing. 3/4HP Motor, 115/230V(Wired 115) 1PH, Spindle Travel 3-1/4" Column Diameter 3.13" Table size 12" x 12" RPM range from 250 to 3000, cord& Plug Additional Info: Unit has been tested and runs good. Missing one handle for the quill travel. Other than some rust build up. Unit is in good shape. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Drive Stone Mountain. GA 3008 3 It is always recommend to come out and inspect the machinery listed before purchase. If ... moreyou have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
Delta 32" Radial Arm Drill Press
This is a consignment sale for an older 32" Delta radial arm drill press.It is in working condition.It has not been used for several years as it is in a 90 plus man's shop.If you have any questions.Call 606-836-3334.Pick-up only.
|
|
|
DELTA ROCKWELL 17 INCH DRILL PRESS DEPTH GAUGE ROD
STOP ROD DEPTH GAUGE FROM A DELTA ROCKWELL MODEL 17-600 DRILL PRESS. 6" STROKE APPOX. 9" OVER ALL. NICE CONDITION.
|
|
|
Delta Milwaukee 14 inch drill press slow speed pulley metal working extras!
Ready to go! Plus original paperwork. Pulley was glass bead blasted to clean up and bearing replaced. Bulletin for installation and drill press owner's manual. Hard to find!
|
|
|
Delta Milwaukee 14 inch drill press spindle pulley new bearing!
Spindle pulley for Delta 14 inch drill press with new bearing. good working order.
|
|
|
Delta Milwaukee 14 inch drill press motor pulley
4 speed motor pulley to match the spindle pulley of the DP 220 casting spindle. 1/2 bore. Good working order
|
|
|
Delta Milwaukee 14 inch Drill press spindle with new bearings
As shown. Good working order. Bearings are obsolete. So had adaptor sleeve made to recreate new bearing. The sleeve is held into the bearing with lock tight and the bearing has a slip fit on the shaft. The sleeve is then notched to lock onto the shaft. In the end, in functions just like the original. Paid $60 for these sleeves! Fits the DP 220 casting for 14 inch drill press
|
|
 |