Collet Speed Chuck Spindle Nose Collet Speed 25 000 Rpm Sjogren Speed Hardinge Sjogren Hardinge Step 5C Collet Closer Spindle Nose 6 Collet Chuck 5C Collet Chuck 5C Collet Indexer 5C Collet Fixture Sjogren Sjogren Collet Chuck 5C Lathe Collet Mount Collet Universal Engineering Acura-Grip Lathe Collet Chuck Da180 Collet Big-Daishowa Bt40 Speed 25 000 Rpm Bt Collet Closer Cnc Lathe Collet Collet Fixture Shank 4 Collet 2J Collet 5C Speed 5C Collet Block Jacobs Spindle Nose Lathe Cat 40 Er Air Collet Cnc Collet Chuck 6 Collet Single Angle Collet Spindle Mount Warner Swasey Master Collet Kennametal Erickson Pratt Burnerd Er16 Inch Steel Set Universal Eng Hardinge Chuck Single Angle Dead Length Rubber Flex Er32 Collet Chuck A2-6 Spindle 40 Er Er 16 Hardinge 5C Collet Indexer Fixture 40 Er 16 Universal Engineering Royal 5C Bt 40 Er Er25 3J Collet Bar Puller Da 200 Collet Quick Change Collet Collet Marked Collet Indexer Fixture Er 32 Draw Tube D1-6 Mount Big-Daishowa Bt40 Nbn-16 New Baby Collet 3 1 4 Long Machine Metal Bros Stamp 16C Collet Extra Depth Tapping Collet Tg 100 Collet Double Angle Nmtb30 Shank Collet Adapter 40 Shank True Length Jacobs Model 50 Cnc Bar Puller 5C 3 1 4 Long Machine Valenite Cat50 00 Shank Type Collet 25 000 Rpm Bt 30 Er Speed 25 000 Rpm Bt 30 Tg75 Collet Engineering Acura-Grip Cat 50 V-Flange Collet Universal Engineering Acura-Grip Cat 50 V-Flange Acura Flex Hardinge 2 Speed 25 000 Rpm Cat D1-4 Chuck Collet Sleeve R8 Round Smooth Collet Spin Indexer Tsd Universal Collet Nut Taper Spindle D1-4 Yuasa Tap Collet Deltronic Pins Bt30 Sk10-45 Riken Collet Chuck Wr 8 Hook Style Wrench For Cnc Mill Tool Cutter Grinder 3 Kennametal 300 Da R8 Shank Cnc Mill Tool Thread Mount 2 Sandvik Collet Chuck L0 Eagle Rock Microcentric D1-5 Sjogren 5C Collet Chuck Draw Bar S-16 Lathe Collet Chuck 1 2 Shank 1 Shank 1-1 2 1-1 4 1-1 4 Shank 1-3 4 1-3 8 16 Collet 2 Collet 2 Kennametal 2 Shank 2 Taper 200 Collet Chucking 3 4 Shank 3 Collet 3 Jaw 32 Collet 3C 4 Collet 4 Inch 4 Kennametal 4 Shank 5 8 Shank 5 Collet 5C 5C 2 5-C Air 5C Collet 5-C Collet 5C Collet Block Chucking 5C Collet Chucking 5C Step Chucking 5E Collet Chuck 6 Collet Chuck Hydraulic 8 Collet 8 Inch 8 Tpi Acura-Grip Cat 50 V-Flange Collet Chucking Air Angle Collet Chucking At40 Er Collet Chuck Ats Ats Workholder Back Collet Chuck Bison Bosch Bridgeport Brown Sharpe Bt 40 Bt40 Nbn-16 New Baby Collet Chucking Cat 40 Cat 50 Cat 50 Tg 100 Collet Chucking Cat40 Chucking 1 Chucking 2 Chucking 5 Chucking 6 Chucking D1-6 Chucking Model Chucking W Cat40 Shank 3 Collet Chucks Cincinnatti 5C Collet Adaptor Cnc Cnc Collet Chucking Cnc Lathe Cnc Machine Cnc Mill Collet Collet 1 Collet Chucking Collet Chucking 1 Collet Chucking 4 Collet Chucking Cat-50 Collet Chucking Extension Collet Chucking Extension W 1 Collet Chucking Fixture Collet Chucking Hardinge Collet Chucking Holder
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
This site contains affiliate links for which I may be compensated
ER32 COLLET 8PC Set COMMON SIZE 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 NEW
$
45.00
Buy It Now
Free Shipping
Condition: New
Location: Schaumburg, United States
8PC High Precision ER32 Collets Set Common Popular Size Accuracy: 0.0002" or 5um 1/8" 3/16. 1/4" 5/16" 3/8" 1/2" 5/8" ... more3/4" Running True at Hi gh Speed turning Fit al l R 8. Mor se tapper. CAT BT CNC ER32 chuck or holder Free Shipping in US Features: Ma de of high grade spring steel 8 PC Size: 1/8" 3/16. 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" T.I.R. 0.0002" or 5u m. In order to make all collets run ning true. On your side. Make sure your machine spindle and chuck holder running true. On my side. I'll make sure all those collets running in tenth. Special angled slots increase rigidity Better overall balance of tool holder assembly Protects tool holder from contaminants Use with any standard ER collet chucks for coolant-thru tool applications. Decent quality at reasonable price Shipping: Ship out from Chicago Free Shipping in US regardless of qty $ 1 5 ship to Canada via post office Payment: Paypal is preferred Credit card is acceted Return: 30 Days return policy
METRIC ER32 COLLET 20PC PRECISION SET 2MM-20MM ACCURATE NEW
$
90.00
Buy It Now
Free Shipping
Condition: New
Location: Schaumburg, United States
Fit al l R8,mor se tapper, CAT BT CNC ER32 chuck or holder. Use with any standard ER collet chucks for coolant-thru tool applications. 20 PC Set:From ... more2mm-20mm increase by 1mm. 2, 2.5 ,3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20mm.
13Pc Mill Chuck Holder R8 Collet Set 1/8-7/8" High Precision for Bridgeport.0006
$
45.59
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Features 13 Pcs of R8 collets set Sizes : 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16, and 7/8" Made of high grade tool ... moresteel Hardened and precision ground TIR 0.0006" All collets have 7/16" - 20 drawbar thread Good performance and long use time. Durable and of practical use Packaged in a plastic case individually.
R8 Shank ER40 Collet Chuck w/15Pcs Collets Set 1/8-1" for CNC Milling Machine US
$
72.82
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
ER40 Collet 15 Pcs Set R8 Shank Tools fit for Milling Machine, Lathe, Drilling. 1 x R8 Shank ER40 Collet Chuck. 1 x ER40 Spanner. High Precision Collet ... moreChuck System Suitable For All Milling And Drilling Applications.
Precision Milling Collet Chuck ER32 Holder R8 Shank Drawbar Thread 7/16"-20
$
39.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
DrawBar Threads Suitable For All Kinds Of Milling Machine Spindle Taper Hole For The R8. Used For Clamping Tools, Change The Taper Hole Of Spindle. Unit ... moreDim L x W x H (in) Unit Weight Hardened And Ground Throughout.
Collet High Grade Steel Hardened Ground R8 7/8'' Spring Collet Drawbar Thread
$
10.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
Drawbar Thread High Grade Collet Steel. 1-1/8 x 1-1/8 x 4 Estimated . Run-Out Rolerance.
HIGH PRECISION ER-40 ER COLLET CHUCK with R8 SHANK FOR MILLING MACHINE R-8
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: Pittsburgh, United States
HIGH PRECISION COLLET CHUCK, WITH R-8 Shank. 7/16-20 Drawbar Thread (Standard R8). R-8 Mounting fits any lathe spindle with this mount. Complete with ... morechuck wrench. Higher precision than anything you will find near this price.
NEW 8MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR EXTENSION HOLDER 4.0"
$
29.99
Buy It Now
$6.00 Shipping
Condition: New
Location: Irvine, United States
NEW 8MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR GAGE LENGTH 4.0". HOLDER TYPE ER COLLET HOLDER CLAMPING RANGE 1/8-3/16″ CLAMPING OCLLET ER8. SHANK ... moreTYPE LATHE CHUCK DRAWBAR THREAD NO COLLET NUT ER8 M.
13× Mill Chuck Holder R8 Collet Set 1/8-7/8" High Precision for Bridgeport.0006
$
46.82
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification： Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" Accuracy .0006" TIR Drawbar Thread: 7/16"-20 Precision Ground ... moreto close tolerance Hardened and ground throughout Features: Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" Accuracy .0006" TIR Drawbar Thread: 7/16"-20 Precision Ground to close tolerance Hardened and ground throughout .
Precision R8 Round 1/2'' Collet Milling Machine Drawbar Thread 7/16"- 20 Mill
$
12.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Precision R8 Round 1/2" Collet. Precision collet within 0.0006" TIR 1" from face. 7/16"-20 Draw Bar Thread. Precision ground to close tolerance. Hardened ... moreand ground throughout.
VEVOR 25 Pcs ER32 Collet Set from 1/16" to 3/4" for High Accurate CNC Lathe
$
55.69
Buy It Now
Free Shipping
Condition: New
Location: United States
VEVOR CAT40 Collet Chuck CNC Keyless Drill Chuck 1/2" for HAAS CAT40 APU13. VEVOR 4pcs CAT40 ER16 4" Collet Chuck G2.5 100mm Tool Holder Balanced 20000RPM. ... moreHigh Performance ER32 Spring Collet: All critical collet surfaces are precision ground for an accurate fit.
Precision R8 3/8'' Round Collet .0005'' TIR Milling Mill Lathe Harden Tool
$
13.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Precision Collet Within 0.0005" TIR 1" From Face. Precision R8 3/8" Round Collete. 7/16"-20 Draw Bar Thread. Precision Ground To Close Tolerance. Weight: ... more11 Ounce Estimate Only . Hardened And Ground Throughout.
ER8~ER20 Collet Chuck Holder CNC Milling Extension Rod Straight Shank A M Type
$
15.75
Buy It Now
Free Shipping
Condition: New
Location: China
Description:Carbon motor brushes are one of the most commonly replaced power tool components. Since carbon brushes are wear and tear items, meaning that ... morethrough friction and using they will gradually wear away, they eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed , chop saw, blower motor, cut-off saw and angle grinder.NOTE:Please replace brushes every 60 hours.
TECHNIKS ER16 COLLET SET SUPER PRECISION 10 PC 3/32" - 3/8" 1/8 1/4 3/16 5/16
$
100.69
Buy It Now
$4.00 Shipping
Condition: New
Location: Huntington Beach, United States
The most accurate ER16 collet in the industry- average 0.0002” Total Indicated Runout (T.I.R.). The most accurate ER16 collet in the industry- average ... more0.0002" Total Indicated Runout (T.I.R.)! Techniks part # 04209IS.
R8 Shank ER40 Collet Chuck w/15Pcs Collets Set 1/8-1" for CNC Milling Machine US
$
72.82
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
ER40 Collet 15 Pcs Set R8 Shank Tools fit for Milling Machine, Lathe, Drilling. 1 x R8 Shank ER40 Collet Chuck. 1 x ER40 Spanner. High Precision Collet ... moreChuck System Suitable For All Milling And Drilling Applications.
CAT 40 Tool Holder Kit for Haas Fadal CNC Mill ER32/16 Chuck Collet Set NEW
$
242.90
Buy It Now
Free Shipping
Condition: New
Location: Westbury, United States
CAT 40 Tooling Kit for Haas Fadal CNC Mill-ER Chuck Collet Holder ER32/16 Tap. 【Great Accuracy & Speed:】CAT40 collet chuck accuracy in Tenth. Collet Set: ... moreT.I.R.: 0.0003" or 5 um. Hardened and ground to ensure maximum accuracy.
8MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR EXTENSION HOLDER LENGTH 2"
$
19.99
Buy It Now
$6.00 Shipping
Condition: New
Location: Irvine, United States
NEW 8MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR GAGE LENGTH 2.0". HOLDER TYPE ER COLLET HOLDER CLAMPING RANGE 3/16-1/4″ CLAMPING SIZE ER8. SHANK TYPE ... moreLATHE CHUCK DRAWBAR THREAD NO COLLET NUT ER8 A.
TECHNIKS 1/8" SUPER PRECISION ER16 COLLET .0002 ACCURACY CNC CHUCK MILL
$
13.59
Buy It Now
$4.00 Shipping
Condition: New
Location: Huntington Beach, United States
The most accurate ER16 collet in the industry- average 0.0002" Total Indicated Runout (T.I.R.)! Techniks part # 04216-1/8. Others T.I.R. 0.0060" - TECHNIKS ... moreT.I.R. 0.0002". Precision ground and hand inspected.
SHARS R8 ER 40 SPRING COLLET CHUCK SET 17 PCS .0005” NEW R[
$
149.95
Buy It Now
$28.06 Shipping
Condition: New
Location: Saint Charles, United States
R8 drive slot is precision mill finished to give a tight fit into the R8 spindle. 1pc of R8 ER40 Collet chuck. COLLET CHUCK STYLEStandard. COLLET SERIESER40. ... moreCollet range is. 040" due to revolutionary "X-tra Flex Design".
6Pcs 1/8" 1/4" 3/8" 1/2" 5/8" 3/4" Precision R8 Collet Set Mill Chuck Holder Kit
$
26.99
Buy It Now
Free Shipping
Condition: New
Location: Azusa, United States
Precision Thread Hole allows the collet to be quicky connected with pull rod. 6 Pcs 8MILELAKE Precision R8 Collets Set 1/8-3/4". Hardened and precision ... moreground throughout, close tolerance. Drawbar Thread: 7/16"-20.
NEW 10MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR EXTENSION HOLDER 4.0"
$
19.99
Buy It Now
$5.00 Shipping
Condition: New
Location: Irvine, United States
NEW 10MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR GAGE LENGTH 4.0". HOLDER TYPE ER COLLET HOLDER CLAMPING RANGE 1/8-3/16″ CLAMPING OCLLET ER8. SHANK ... moreTYPE LATHE CHUCK DRAWBAR THREAD NO COLLET NUT ER8 M.
Jacobs 50 “New Old Stock” Collet Chuck and 1 1/2 -8 Adapter
$
199.99
3d 10h 50m 30s
0 bids
$24.70 Shipping
Condition: New – Open box
Location: Alden, United States
The collet chuck type is Jacobs Model 50 and the shank type is 1 1/2 - 8.
Shars R8 ER32 3.12" Collet Chuck Mill Tool Holder TIR .0002" New P}
$
45.25
Buy It Now
$11.80 Shipping
Condition: New
Location: Saint Charles, United States
Collet Series: ER32. Max TIR. 0002" OD to ID. R8 drive slot is precision mill finished to give a tight fit into the R8 spindle. Concentricity is less ... morethan. 0002 at collet face. ER collet nut is black oxided.
TECHNIKS 33108 ER8 PowerCOAT Collet Nut ER-8 Free Shipping
$
39.95
Buy It Now
Free Shipping
Condition: New
Location: Surprise, United States
One new TECHNIKS 33108 ER8 PowerCOAT collet nut (approx .471" OD); 2 available, bag will go with the first one sold. Free shipping. Questions welcomed, ... morethanks for looking...
Grip-On 1/8" Collet for Air Die Grinder NEW Lifetime Warranty
$
9.75
Buy It Now
Free Shipping
Condition: New
Location: Akron, United States
Grip-On 1/8" Collet for Air Die Grinder.
R8 Precision Round Spring Collet, R8 Collet, Precision R8 Collet Set, 1/8 1/8"
$
27.62
Buy It Now
Free Shipping
Condition: New
Location: Miami, United States
R8 Precision Round Spring 13pc Collet Set. 1/8-7/8in by 16ths(106197) Item is from a customer return. Like new condition. Oil still on collets. In original ... morepackaging. Collet concentricity guaranteed to 0.0004" Set includes: 13 Collects• 1 Wooden Case Included 1 each of collet sizes: 1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16" 7/8" Part Number 3-169-113(106197) Ebay Buyer may choose to repackage/ relabel container. CHECK OUT MY OTHER LISTINGS HERE Powered by The free listing tool. List your items fast and easy and manage your active items.
R8 Shank Milling Collet Chuck Precision Holder CNC 7/16" 20UNF Mill Machine Tool
$
32.95
Buy It Now
Free Shipping
Condition: New
Location: El Monte, United States
Shank Taper: R8. Milling Machine. Our experienced machine builders will provide you with professional advices, from finding a right size screw to converting ... moreyour old lathe to a CNC machine. Customize Information.
R8 COLLET 1/8,1/4,4mm,5mm,6mm,8mm,10mm,12mm,1/2 (Inch thread) FREE PRIORITY SHIP
$
17.00
Buy It Now
Free Shipping
Condition: New
Location: Bradenton, United States
8MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR EXTENSION HOLDER LENGTH 2"
$
19.99
Buy It Now
$5.00 Shipping
Condition: New
Location: Irvine, United States
NEW 8MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR GAGE LENGTH 2.0". HOLDER TYPE ER COLLET HOLDER CLAMPING RANGE 3/16-1/4″ CLAMPING SIZE ER8. SHANK TYPE ... moreLATHE CHUCK DRAWBAR THREAD NO COLLET NUT ER8 A.
NEW 10MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR EXTENSION HOLDER 4.0" USA
$
19.99
Buy It Now
$6.00 Shipping
Condition: New
Location: Irvine, United States
NEW 10MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR GAGE LENGTH 4.0". HOLDER TYPE ER COLLET HOLDER CLAMPING RANGE 1/8-3/16″ CLAMPING OCLLET ER8. SHANK ... moreTYPE LATHE CHUCK DRAWBAR THREAD NO COLLET NUT ER8 A.
R8 Shank ER40 Collet Chuck w/15Pcs Collets Set 1/8-1" for CNC Milling Machine US
$
72.82
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
ER40 Collet 15 Pcs Set R8 Shank Tools fit for Milling Machine, Lathe, Drilling. 1 x R8 Shank ER40 Collet Chuck. 1 x ER40 Spanner. High Precision Collet ... moreChuck System Suitable For All Milling And Drilling Applications.
R8 Shank ER40 Collet Chuck w/15Pcs Collets Set 1/8-1" for CNC Milling Machine US
$
69.96
Buy It Now
$3.01 Shipping
Condition: New
Location: Chino, United States
ER40 Collet 15 Pcs Set R8 Shank Tools fit for Milling Machine, Lathe, Drilling. 1 x R8 Shank ER40 Collet Chuck. 1 x ER40 Spanner. High Precision Collet ... moreChuck System Suitable For All Milling And Drilling Applications.
R8 7/8'' Collet High Grade Steel Hardened Ground Spring Collet Drawbar Thread
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Drawbar Thread: 7/16" - 20. R8 7/8" Spring Collet. High Grade Collet Steel.
ER40 Collet 15PC Set R8 Shank Chuck, Tools for Milling Machine, lathe, Drilling
$
79.00
Buy It Now
$19.00 Shipping
Condition: New
Location: Schaumburg, United States
15PC, ER40 Collet Set : 1/8 - 1" by 16th (1/8, 3/16, 1/4, 5/16, 3/8, 7/16,1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1"). R8 Shank ER40 Chuck With ... more15 PC Collets Set. 1 PC R8 Shank ER40 collet chuck.
Milling Machine R8 Round 1/2'' Collet Drawbar Thread 7/16"- 20 For Lathe
$
12.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
Drawbar Thread Internally Suitable For All Kinds Of Milling Machine Spindle Taper Hole For The R8. Precision Collet Within 0.0006" TIR 1" From Face. Used ... moreFor Clamping Tools, Change The Taper Hole Of Spindle.
NEW 5/8" STRAIGHT SHANK ER16 COLLET CHUCK TOOL HOLDR LENGTH 1" MINI NUT
$
29.99
Buy It Now
$8.00 Shipping
Condition: New
Location: Irvine, United States
NEW 5/8" STRAIGHT SHANK ER16 COLLET CHUCK TOOL HOLDR GAGE LENGTH 1.0" WITH FLAT. HOLDER TYPE ER COLLET HOLDER CLAMPING RANGE 3/16-3/8″ CLAMPING SIZE ER16. ... moreSHANK TYPE LATHE CHUCK DRAWBAR THREAD NO COLLET NUT ER16 A.
BOSTAR 5C Collet Lathe Chuck With Semi-finished Adp. 1-3/4" x 8 Thread.
$
148.00
Buy It Now
Free Shipping
Condition: New
Location: Schaumburg, United States
BOSTAR 5C Collet Chuck With Semi-finished Back Plate 1-3/4" x 8 Thread Mounting. Can Use Any Size 5C Collet From 1/16 through 1-1/8". The mounting holes ... moreare already drilled and tapped. This work just like assembly a 3-jaw chuck with a new back plate.
8MM STRAIGHT SHANK ER11 COLLET CHUCK TOOL HOLDR EXTENSION HOLDER LENGTH 4.0" USA
$
19.99
Buy It Now
$5.00 Shipping
Condition: New
Location: Irvine, United States
NEW 8MM STRAIGHT SHANK ER11A COLLET CHUCK TOOL HOLDR GAGE LENGTH 4.0". HOLDER TYPE ER COLLET HOLDER CLAMPING RANGE 3/16-1/4″ CLAMPING SIZE ER11. SHANK ... moreTYPE LATHE CHUCK DRAWBAR THREAD NO COLLET NUT ER11 A.
NEW R8 ER20 7/16 COLLET CHUCK TOOL HOLDER MILLING TOOLS USA SELL
$
39.99
Buy It Now
$8.00 Shipping
Condition: New
Location: Irvine, United States
NEW R8 ER20 COLLET CHUCK TOOL HOLDER MILLING TOOLS. For all ER20 Collets. Collet nut included. Drawbar Thread :7/16. If both quality and cost are your ... morefirst concern.
Hex & Square ER-32 Collet Block Spring Chuck Holder Set For CNC Milling Machine
$
44.89
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: ER-32 Collet Block Brand new Model: ER32 Material: hard steel Color: silver & black Size: approx. 41*69mm/1.6*2.7in ER-32 Square Collet ... moreBlock Model: ER32 Material: hard steel Color: silver & black Size: approx.45*70mm/1.7*2.7in.
R-8 COLLET RACK HOLDS UP TO 32 HEAVY TOOLS R8 SHANK
$
32.99
Buy It Now
$11.99 Shipping
Condition: New
Location: Burbank, United States
ONE R-8 COLLET and TOOL HOLDER CADDY ORGANIZER FOR MILLING MACHINES. CONVENTIONAL APPLICATION(BLACK CHARCOAL COLOR) THE MOST AFFORDABLE WAY TO ORGANIZE ... moreYOUR COLLETS Ø Introducing our R-8 Series Caddy Organizer Our R-8 COLLET RACK HOLDS UP TO 32 HEAVY TOOLS R8 SHANK Organizes you collets and heavy tool holders. Drill Chucks Boring Heads Shell Milling Arbors Fly Cutters Face Mill Milling Cutters ER-SERIES Collet Chuck. Etc. ü(tools not included) COMPACT DESIGN FITS ON A SMALL SURFACE OF 8" X 16" AND TAKES A WHOLE LOT OF LOAD. Sturdy Styrene Plastic Construction. 1/4" thick will support up to 100 lbs of weight. Removable Tool Caddy Organizer Designed to Use with a Standard(16 x 30) Utility Cart. Cart not included) ü Portable Tool Caddy Organizer for easy handling. Designed with side ears to carry out. ü ü This unit Also takes the TSD AF-95 UNIVERSAL COLLETS ü ü 100% MADE IN USA ü Life Time Warranty. ü 100% satisfaction guarantee. thousands of satisfied buyers can not be wrong. Please read about satisfied customers on the feedback history. check on other products from us.
Precision R8 Collet Set 13pc Mill Collets Set – Collets for Mill Machine
$
51.29
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature： Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" Accuracy .0006" TIR Drawbar Thread: 7/16"-20 Precision Ground ... moreto close tolerance Hardened and ground throughout Description： Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" Accuracy .0006" TIR Drawbar Thread: 7/16"-20 Precision Ground to close tolerance Hardened and ground throughout Package List: 1 set of 13pcs Precision R8 Collets Set Notes:.
NEW 12 MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR EXTENSION HOLDER 6.0"
$
29.99
Buy It Now
$6.00 Shipping
Condition: New
Location: Irvine, United States
NEW 12MM STRAIGHT SHANK ER8 COLLET CHUCK TOOL HOLDR GAGE LENGTH 6.0". HOLDER TYPE ER COLLET HOLDER CLAMPING RANGE 1/8-3/16″ CLAMPING OCLLET ER8. SHANK ... moreTYPE LATHE CHUCK DRAWBAR THREAD NO COLLET NUT ER8 M.
2pcs 8mm collet chuck Engraving Trimming machine Electric Router
$
5.70
Buy It Now
Free Shipping
Condition: New
Location: China
We will try our best to solve the issue.
R8 Shank Milling Collet Chuck Precision Holder CNC 7/16" 20UNF Mill Machine Tool
$
27.95
Buy It Now
Free Shipping
Condition: New
Location: El Monte, United States
Shank Taper: R8. Milling Machine. Our experienced machine builders will provide you with professional advices, from finding a right size screw to converting ... moreyour old lathe to a CNC machine. Customize Information.
C-8-10-12-16-20-25-Mm ER-8-11-16-20-A Straight Shank Extension Collet-Chuck
$
24.95
Buy It Now
Free Shipping
Condition: New
Location: 金东区, China
The extra long avoidance of the ER extension rod can bring the milling cutter into the deep cavity machining groove for machining. Full range of Type ... moreA ER sizes available: ER8A, ER11A, ER16A, ER20A.
Shars R8 ER40 3.15" Collet Chuck Mill Tool Holder TIR .0002" New P}
$
36.95
Buy It Now
$11.80 Shipping
Condition: New
Location: Saint Charles, United States
R8 drive slot is precision mill finished to give a tight fit into the R8 spindle. COLLET CHUCK STYLEStandard. COLLET SERIESER40. Concentricity is less ... morethan. 0002 at collet face. Internal set screw is included and can be used as a stopping pin to prevent end mill or drill from sliding backwards while performing heavy cutting.
HFS (R) 14 Pcs 1/8-1"x8ths 5C Precision Round Collets with Collet Block Chuck
$
126.99
Buy It Now
Free Shipping
Condition: New
Location: Covina, United States
In addition to the collets, the set also includes a collet block set that consists of 1 square, 1 hex, and 1 collet closer. These blocks provide secure ... moreand stable support for the collets during use, further enhancing their functionality and convenience.
BOSTAR 5C Collet Lathe Chuck Closer With Semi-finished Adp. 1-1/2" x 8 Thread
$
135.00
Buy It Now
$10.00 Shipping
Condition: New
Location: Schaumburg, United States
Can Use Any Size 5C Collet From 1/16 through 1-1/8". BOSTAR5C Collet Chuck With Semi-finished Back Plate 1-1/2 x 8 Thread Mounting. The mounting holes ... moreare already drilled and tapped. This work just like assembly a 3-jaw chuck with a new back plate.
ER40 MT3//ER32 MT3/ER40 NT40/ER32 NT40/ER32 R8 Spring Collet Chuck Set
$
50.50
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification： 17Pcs ER40 MT3 17Pcs MT3 Shank ER40 Chuck Spring Collet Chuck Set Fit for CNC Engraving Machine and Milling Lathe Tool (MT3 ER40) Specification: ... moreAccuracy to .0005". Spindle Drawbar thread: 1/2"-20". ER40 clamping range: 2-26mm. Suitable For: High precision collet chuck system suitable for all milling and drilling applications. Collet Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1". Advantage: Performance stability, high accuracy. Ease of operation and high quality work results. 14Pcs ER32 MT3(3900-0503).
R8 Shank ER40 Collet Chuck CNC Tool Holder for Milling Machine Tool
$
36.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
1 Piece R8 Shank ER40 collet chuck. 1 Piece ER40 Spanner. High Precision ER-40 ER Collect Chuck with R8 Shank. 7/16-20 Drawbar Thread (Standard R8). Mainly ... moreused in all kinds of drilling and milling machines.
BOSTAR 5C Collet Chuck With Semi-finished D1-8 Back Plate
$
299.00
Buy It Now
$33.00 Shipping
Condition: New
Location: Schaumburg, United States
The chuck can use Any Size 5C Collet. This work just like assembly a 3-jaw chuck on a new back plate. As this final assembly work is done on your own, ... morefinal use lathe, usually can reach the highest TIR accuracy.
NEW iCarbide ER8 MINI COLLET NUT WRENCH SPANNER
$
6.99
Buy It Now
$6.00 Shipping
Condition: New
Location: Irvine, United States
For all ER8 Cellet nut. Send Check to 192 technology dr. Site P Irvine CA92618.
R8 Collet 1/2” Diameter Bridgeport Milling Mill Machinist Tool Nice Condition
$
5.00
Buy It Now
$8.95 Shipping
Condition: Used
Location: Youngstown, United States
Will combine shipping. a2
13Pack Mill Chuck Holder R8 Collet 1/8-7/8" High Precision For Bridgeport 0.0006
$
40.39
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Features： Made of high grade tool steel Hardened and precision ground TIR 0.0006" All collets have 7/16" - 20 drawbar thread Good performance and long ... moreuse time. Durable and of practical use Packaged in a plastic case individually Specification: 13 Pcs of R8 collets set Sizes : 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16, and 7/8" Brand marddpair MPN AMZ426001 UPC Does not apply.
80mm Diameter ER-32 Collet Chuck Bearing Steel Compact For Milling Lathe
$
41.93
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature： Mount to your choice of backplate to use on a lathe. Can also be used as a fixture on a milling table. Note: Please allow 1-2CM differs due to ... moremanual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service Quality Assurance For Your Peace Of Mind Package List: 1 x Collet Chuck Specification: Name: 80MM ER-32 Collet Chuck Model: D43072 Material: Bearing Steel Diameter: 80mm/50mm/27mm Height: 50mm .
C8-ER11A-100L Collet Chuck Holder CNC Milling Extension Rod Straight Shank N CAD
$
10.84
Buy It Now
Free Shipping
Condition: New
Location: United States
C8-ER11A-100L (including nuts) Straight Collet Chuck Holder CNC Milling lathe collet. Suitable for milling machine to improve the hardness and endurance ... moreof the. Designed with collet Model: ER11 (folder knife range: 1mm-7mm).
NEW Roto Zip CN1 Replacement Collet and Nut Kit FOR ROTOZIP TOOLS 7720808
$
9.89
Buy It Now
$3.95 Shipping
Condition: New
Location: United States
ROTOZIP TOOLS. Kit includes 1/8", 5/32", and 1/4" collets and collet nut. Includes:(1) 1/8 in Collet, (1) 5/32 in Collet, (1) 1/4 in Collet, (1) Collet ... moreNut. GREAT SALE PRICE.
NEW 5/8 STRAIGHT SHANK ER16 COLLET CHUCK TOOL HOLDR GAGE LENGTH 4.0" USA SELL
$
29.99
Buy It Now
$8.00 Shipping
Condition: New
Location: Irvine, United States
HOLDER TYPE ER COLLET HOLDER CLAMPING RANGE 3/16-3/8″ CLAMPING SIZE ER16. SHANK TYPE LATHE CHUCK DRAWBAR THREAD NO COLLET NUT ER16 A. OVERALL LENGTH 125MM ... moreSHANK LENGTH 100mm SHANK WITH FLAT NO. If both quality and cost are your first concern.
R8 Shank ER40 Collet Chuck w/15Pcs Collets Set 1/8-1" for CNC Milling Machine US
$
68.07
Buy It Now
$5.00 Shipping
Condition: New
Location: Chino, United States
15Pcs Collet Kit R8 Shank ER40 Collet Chuck For CNC Milling Lathe Machine Tool Specification: Color: As picture shows Material: alloy spring steel Gripping ... moreRange: 1/8 - 1" by 16th (1/8, 3/16, 1/4, 5/16, 3/8, 7/16,1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1") Item size: 5*5*17CM Package size: 20*20*10cm Features: The clamping force, high accuracy, good gripping stability. High precision collet chuck system suitable for all milling and drilling applications Fine workmanship, good elasticity, high precision. Durable and excellent for use.Hardened and precision ground. Compact, lightweight and portable. Provides top strength and durability. Widely used in milling, boring, drilling, tapping, CNC, engraving, spindle machines, etc. Package Included: 1 x R8 Shank ER40 Collet Chuck 1 x.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Hardinge 3J Collet RD 3/8, 5/8, 1-5/16, 1-3/4, 15/16
Listing is for one each Total items 5 ea Hardinge 3J Collet RD 3/8. 5/8, 1-5/16,15/16 Name which size you want. 1-3/4 now gone New List Price: $92.50 USD Above picture is stock photo
Royal 16C CNC Lathe Collet Chuck for A-8 Spindel
Royal CNC Lathe 16C Accu-Length Collet Chuck A-8 Spindle Max RPM 4500 Max Press 24 KN ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3545 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
Kennametal 100T255M 25.09-25.50mm C-J-8 Collet Chuck
07 5946 2441 41C This item is surplus stock with some surface rust. OAL 60.3mm. OD 35.0mm. Please email any questions or requests for additional pictures before purchasing. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior.
USED PARLEC CAT50 ER32 COLLET CHUCK C50-32ER8 (8"-Gage) CAT-50 x ER-32
LISTING IS FOR A USED PARLEC CAT50 ER32 COLLET CHUCK BR AND- PAR LEC PART# C50-32ER8 STYLE- ER-32 SHANK- CAT-50 GAGE LENGTH- 8.00" C ONDITI ON- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN ... moreEXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800
HARDINGE 22J SJOGREN LATHE SPEED COLLET CHUCK D1-8 MOUNT D8 CAM LOCK
HARDINGE 22J SJOGREN LATHE SPEED COLLET CHUCK D1-8 MOUNT D8 CAM LOCK NICE CONDITION
JACOBS 96-F1 COLLET CHUCK W/1-1/2"-8 THREAD MOUNT +COLLETS 1/16"-1-3/8" *SUPERB*
JACOBS 96-F1 COLLET CHUCK W/1-1/2"8 THREAD MOUNT +COLLETS 1/16"1-3/8" SUPERB* JACOBS 96-F1 COLLET CHUCK WITH 1-1/2"8 MOUNTING ADAPTER. RUBBER FLEX COLLETS FULL RANGE SET 1/16" 1-3/8" ALL ITEMS ARE IN SUPERB CONDITION AS SHOWN. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $20.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
R8 Round Smooth Collet 7/8 UNKNOWN
YOU ARE BIDDING ON A UNKNOWN R8 SMOOTH ROUND COLLET SIZE: 7/8" SERIES: R8 ITEM IS IN GOOD WORKING CON DITION We at TECHSURPLUS package everything very carefully to avoid our customers getting their package damaged. Please make sure that this product is what you need and has all the pieces that you need. You are only buying what is pictured. If you have any questions please contact us before bidding or if you would like to pick up this item and save shipping please let us know. We will ship to locations other than the continental US. Please contact me for a shipping quote. Please read the item description carefully and make sure this item will fit your application. You are only buying what is pictured. Thank you for your interest! PLEASE CHECK OUT OTHER ITEMS LISTED IN OUR STORE.
U.S.A!! VALENITE DA180 COLLET CHUCK W/ BT30 SHANK & 4 COLLETS - 23/64" TO 5/8"
aims U.S.A! VALENITE DA180 COLLET CHUCK W/ BT30 SHANK& 4 COLLETS- 23/64" TO 5/8" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Valenite. This is a Collet Chuck with 4 Collets in good condition. Appears to be equipped with a Haas style retention knob. Model# BT30-18DA-300 Specifications: Collet Type: DA180. Shank: BT30. Collet Sizes: 23/64" 27/64" 31/64" 5/8" Projection: 3" Overall Length: 5-3/4" ... moreComes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! VALENITE DA180 COLLET CHUCK W/ BT30 SHANK& 4 COLLETS- 23/64" TO 5/8" Reliable Tool Inc. c 2011 | Powered by
PARLEC ER11 Collet Chuck Collet Extension 5/8" Shank Diameter End Mill Holder
ebay template ER11 Collet Chuck Extension 5/8" Straight Shank SPECIFICATIONS Part Number Collet Series Projection Length"C" Dia(A) Dia(B) Depth(D) OAL Nut Torque ER11-625-6H ER11 5 1/2" 5.51.625.615 1.65 6.75 22 ft. lbs. Specifications subject to verification Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery ... moreExchange reserves the right to re-list or re-sell a purchased item if we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need det
Original Hardinge Face Plate Collet Chuck 7 5/8" Dia Thread mount
Original Hardinge Face Plate Collet Chuck 7 5/8" Dia Thread mount Up for bidding a Face Plate Local Pick Up Okay any other info. Just ask. Will ship to any country. ALL SHIPPING ARRANGEMENTS. COSTS, AND BILL OF LADINGS ARE THE RESPONSIBILITY OF THE BUYER! There will be a $10.00 Packaging& Handling fee for shipping. Comes as show in Picture Another Goodie and ready to go a new set of this type sells for several Hundreds over $XXXX.00 buy smart- save money"Made in USA" In excellent working condition NOTE: If this chuck is not what you're looking for. just tell me what You need. and and if I have. is yours Bid with confidence- Check My feedback Any question 626 536 6202“Mike” Se Habla Español Take a good look at the picture. Thanks for being happy buyer“MAY GOD KEEP ON BLESSING AMERICA”
USED PARLEC CAT50 TG100 x 7-5/8"gage COLLET CHUCK (C50-10SC7) CAT-50 TG-100
LISTING IS FOR A USED CAT50 TG100 COLLET CHUCK BRAND- PARLEC MADE IN USA PART# C 50-10SC7 COLLET STYLE- TG100 SHANK- CAT50 V-FLANGE GAGE LENGTH- 7. 625" CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS ... moreMAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS ARE UNPAID WITH
PRECISION B60 DEAD-LENGTH LATHE COLLET CHUCK w/ A1-8 MOUNT + COLLETS
aims PRECISION B60 DEAD-LENGTH LATHE COLLET CHUCK w/ A1-8 MOUNT + COLLETS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Dead-Length Lathe Collet Chuck in Good condition. Features: The collet chucks are mainly used for chucking bar work on ST15. Accepts S-16 Master Collet& B60 Index Collets. Comes with lot of B60 Collets. Specifications: Spindle Mount: A1-8. Nose Diameter: 4-3/4" O.A.L. 6" Flange Diameter: 8-1/4" Mounting Bolt Circle: 6-1/2" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts ... moreat a dollar with no reserve. PRECISION B60 DEAD-LENGTH LATHE COLLET CHUCK w/ A1-8 MOUNT + COLLETS PRECISION B60 DEAD-LENGTH LATHE COLLET CHUCK w/ A1-8 MOUNT + COLLETS PRECISION B60 DEAD-LENGTH LATHE COLLET CHUCK w/ A1-8 MOUNT + COLLETS Reliable Tool Inc. c 2011 | Powered by
USED BALAS C12 FLEXI-GRIP COLLET CHUCK S20-8"-C12-1 (2.50"-SHANK) C-12
LISTING IS FOR A USED BALAS C12 COLLET CHUCK BRAND- BALAS PART# S20-8"C12-1 SHANK DIAMETER- 2.50" OAL- 9.875" USES C12 SERIES BALAS COLLETS(NOT INCLUDED) CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. ... moreSOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS ARE UNPAID WI
USED BALAS C16 FLEXI-GRIP COLLET CHUCK S24-8"-C16-1 (3.00"-SHANK) C-16
LISTING IS FOR A USED BALAS C16 COLLET CHUCK BRAND- BALAS PART# S24-8"C16-1 SHANK DIAMETER- 3.00" OAL- 10.375" USES C16 SERIES BALAS COLLETS(NOT INCLUDED) CONDITION- GOOD USED COMES WITHOUT BOTH BALL BEARING& FLAT WASHERS Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES ... moreWHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSIN
USED BALAS C8 FLEXI-GRIP COLLET CHUCK S14-6-C8 (1.75"-SHANK) C-8
LISTING IS FOR A USED BALAS C8 COLLET CHUCK BRAND- BALAS PART# S14-6-C8 SHANK DIAMETER- 1.75" OAL- 7.625" USES C8 SERIES BALAS COLLETS(NOT INCLUDED) CONDITION- GOOD USED COMES WITHOUT BOTH BALL BEARING& FLAT WASHERS Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ... moreARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAY
JACOBS Model 50 Collet Chuck w/ 50-74 Adapter 1.5" 8 thd & #500 Ten pc.Collets
background.gif" JACOBS Model 50 Collet Chuck w/ 50-74 Adapter 1.5" 8 thd& 500 Ten pc.Collets Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge JACOBS Model 50 Collet Chuck w/ 50-74 Adapter& 500 ten piece collet set This chuck is tight. Shows very little wear and will make a great addition to your machining operation. The collet chuck has been equipped with an AD50-74 adapter which allows it to screw on to a 1.5" 8 THD shaft The black plastic adjusting ring has some chips out of it but this does not interfere with its operation. The 500 Series Collet Set included with the chuck 0.10 inch through 1.06 inch(2.5mm through27mm) Take a look at the pictures to see the condition of this item. Shipping: Generally I ship US priority mail and insure for your protection. About Me: I am in the ... moreprocess of selling off my father in laws estate. He was not a professional collector but he did wind up with some very interesting items. Taking photo's. R/C Model Airplanes, real Airplanes, Ham Radio, plus a lot of Stuff were his hobbies. Actually I think he may have enjoying buying things more than using them. I would also like to note that while I do not have a lot of feedback. It is 100% positive, and my step daughter is assisting me and she has been selling on ebay full time for over 10 years and has over 15,000 feedbacks. Shipping may be combined on multiple purchases. Please pay within 5 days of end of auction. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
BALAS S20-8"-C12-1 COLLET CHUCK C12, 2-1/2” OD. SHANK WITH INTERNAL THREADS
BALAS S20-8"C12-1 COLLET CHUCK C12. 2-1/2” OD. SHANK WITH INTERNAL THREADS THE COLLET CHUCK IS USED. IT COMES WITH 1 COLLET& THE END MILL AS PICTURED. I CAN ASSURE YOU THIS IS SHARP AFTER DROPPING IT ON MY FOOT AND GOING TO THE ER)
ERICKSON QUICK-CHANGE COLLET CHUCK w/3/8"; 5/8"; 3/4' 1" Collets (273)
USED… ERICKSON" QUICK-CHANGE COLLET CHUCK Type: TG Model: 2-15-209-100 Condition: Good General Specifications: Collet Chuck Capacity: 3/32" to 1" Spindle Taper: 40 NMTB Nose Piece: 2-1/4" Hex Approximate Weight: 5 Lbs Equipped With: ● Four(4) TG-100 Collets = 3/8" 5/8" 3/4" 1" PRICE F.O.B. Odessa. Florida…$200.00(Plus any applicable taxes.
Universal Kwik-Switch 300 Series Collet Chuck 3/8"-3/4"
Universal Kwik-Switch 300 Series Collet Chuck 3/8"3/4" Universal Kwik-Switch 300 Series Collet Chuck 3/8"3/4" Diameter Ref.110-148 Collet Type: Z Double Taper Collet Range: 3/8"3/4" Nut Type: 2"1 3/16” Universal Part No. 80320 Kwik-Switch Size: 300 Overall Dimensions: 4-1/2" x 2-1/2" Approximate Shipping Weight: 3 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. ... moreWe ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13ef98e20ae-0xfb-
#50NT COLLET HOLDER-DEVLIEG-TG100-& (1)7/8" COLLET
50NT COLLET HOLDER-DEVLI-G-FLASH CHANGE#TH50FC10SG- USES TG100COLLETS- 1)7/8" COLLET-USED-INCLUDED. OD OF TAPER HAS CUT OUT(POSSIBLY FOR A LOCKING PIN? INV#60324-1 Powered by The free listing tool. List your items fast and easy and manage your active items. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13ef98e2106-0xf2-
#40NT-TG100 COLLET CHUCK- NO NAME & (1) 7/8"TG100-COLL
40NT-TG100 COLLET CHUCK- NO NAME& 1) 7/8"TG100-COLLET-USED IN GOOD CONDITION INV#61637-1 INV#61929 Powered by The free listing tool. List your items fast and easy and manage your active items.
Hardinge Sjogren 3J collet chuck D1-8 camlock mount
Used in good condition Hardinge Sjogren 3J collet chuck no.3-D8. Takes 3J collets. D1-8 camlock mount. Buyer to pay shipping on 36 pounds. Due to excessive and abusive negative feedback from Canadians. I no longer sell to Canada. Powered by The free listing tool. List your items fast and easy and manage your active items.
YUASA 5C COLLET INDEXING 2 1/4" x 8 TIP FITS SOUTH BEND LATHE CHUCK MILLING MILL
LOTS OF AUCTIONS ONLINE NOW! Brand Yuasa Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
collet closer,south bend,atlas,logan speed chuck 1 1/2'' - 8 THREAD
LOGAN ENGINEERING CO. COLLET CLOSER. TAKES A NO. 480 COLLET, CALL WITH QUESTIONS 716-474-7447 THANKS GARY
5-C COLLET SPACER mill grinder chuck indexer tool holder 1 1/8" HARDINGE COLLET
good used 5C collet spacer mfg not marked includes Hardinge USA 1 1/8" collet please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE! NIKKEN BT-30 SHANK SK-16 SLIMCHUCK HOLDER COLLET CHUCK W/ 1/8" COLLET
Made by Nikken This is a Slimchuck Holder collet chuck with collet in good condition. There were originally 9 of these tool holders available for sale here.check the number above for the number currently available. All are in similar condition as the one shown in the pictures. If more than one is purchased. Shipping is charged for the first one only and the others ship free in the same box. Model Number: BT30-SK16-60 Specifications: Shank: BT30 Collet Tool Holding Capacity: 1/8" Overall Length: 5" Comes in the same condition as the one shown in pictures. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f274a7ca6-0x100-
SANDVIK COLLET HOLDER C-8 COLLET 875Y
| | SANDVIK COLLET HOLDER C-8 COLLET 875Y, Click to View Image Album You are bidding on a used but good collet chuck. This is for the Sandvik C-8 collet. This has an O.D. of 2& 1.2' and an OAL of 9& 1/2' Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. Payment, I accept the following forms of payment: PayPal Shipping& Handling, UPS Ground(prices calculated at checkout) Policies, STORE CATEGORIES, PAYMENTS, You may combine items to save on shipping. During checkout. We will apply your shipping discount. SHIPPING, Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with ... morePayPal. If that address is incorrect. It is the buyer s responsibility to supply us with the correct address prior to paying for the item. Your eBay account must be listed a business name to qualify for shipping discount. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 10 days have past. We ship 3 days a week. This means that your item can take as long as 10 BUSINESS days to receive your item. Inernational items may take longer. POLICIES, All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase, we will gladly refund your money, minus shipping costs. If the item is not as described, you will receive a full refund. CONTACT US, Taps and More Joe D'Amico Cleveland. Ohio 440-773-9477 FREE scheduling. Supersized images and templates. Get Ven
DA180 COLLET CHUCK EXTENTION WITH 8 DA 180 COLLETS GREAT CONDITION LOT C3453
LOT# C3453 FREE SHIPPING IN USA WE ARE OFFERING A DA180 COLLET EXTENSION 1-1/4" DIAMETER SHANK WITH 8(EIGHT) DA180 COLLETS. WE ALSO HAVE ANOTHER ONE LISTED. YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
USED UNIVERSAL 3/8"TO 1" DOUBLE TAPER COLLET TOOL CHUCK
O25)
BAKUER 30NT COLLET CHUCK + 6 COLLETS 3/16"-5/8"
BAKUER 30NT COLLET CHUCK + 6 COLLETS 3/16"5/8" Made in Italy.Good Condition.Outer box has some used marks and ware-see pictures) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f6b868871-0xfc-
JAPAN! LYNDEX DA180 COLLET CHUCK W/ CAT40 SHANK & 2 COLLETS - 13/32" & 5/8"
aims JAPAN! LYNDEX DA180 COLLET CHUCK W/ CAT40 SHANK& 2 COLLETS- 13/32" 5/8" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Japan by Lyndex. This is a Collet Chuck with 2 Collets in good condition. Appears to be equipped with a Haas style retention knob. Model# C4007-0180 Specifications: Collet Type: DA180. Shank: CAT40. Collet Sizes: 13/32" 5/8" Projection: 3-3/4" Overall Length: 8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. JAPAN! LYNDEX DA180 COLLET CHUCK W/ CAT40 SHANK& ... more2 COLLETS- 13/32" 5/8" Reliable Tool Inc. c 2011 | Powered by
Hardinge 5C Collet,13/16,1/4,5/8,5/16,9/16,1/2,7/8,11/16,1-1/64,1/8,3/16,SPI 1/2
NUMBER OF Items 12(one of each) Not Hardinge Brand Items Shape Round. Sizes 5C Collets,13/16,1/4,5/8,5/16,9/16,1/2,7/8,1/8,3/16,15/16,7/16(new) and hex SPI 1/2-made in germany System of Measurement Inch Each New List Price: $50.25+ USD x12 One lot
JAPAN! LYNDEX TG100 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS - 1/2", 5/8" & 3/4"
aims JAPAN! LYNDEX TG100 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- 1/2" 5/8" 3/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Japan by Lyndex. This is a Collet Chuck with 3 Collets in good condition. Appears to be equipped with a Haas style retention knob. Model# C40S7-1000 Specifications: Collet Type: TG100. Shank: CAT40. Collet Sizes: 1/2" 5/8" 3/4" Projection: 2-1/2" Overall Length: 6-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. JAPAN! LYNDEX TG100 COLLET CHUCK ... moreW/ CAT40 SHANK& 3 COLLETS- 1/2" 5/8" 3/4" Reliable Tool Inc. c 2011 | Powered by
5c Collet Indexer Spin Index Fixture 1 1/8"
5C Collet Indexer Collet capacity: 1 1/8" Email me with any questions Posted with
Dunham 16C A-8 CNC collet chuck for Haas, Mori or Mazak NO RESERVE!!!
You are bidding on a Dunham 16C-A8 collet chuck. This is a set true system. Item is used but in excellent shape. Sold as is. Local pickup is also available. NO RESERVE! FREE SHIPPING! If you have questions. Please contact me at 503-740-6213 Happy Bidding!
5C Collet Chuck for lathe with 8 Collets and Key-In Excellent Condition
5C Collet Chuck with 8 Collets and Key In Excellent Condition I purchased this chuck from Shars about 2 years ago and used it very little. It comes with 8 collets: 1/8. 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1" and the Key. Some of the Collets have never been used. Cost new is about $300.00 for all.
KENNAMETAL TG100 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS - 1/8", 3/16" & 7/32"
aims KENNAMETAL TG100 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- 1/8" 3/16" 7/32" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Kennametal. This is a Collet Chuck& 3 Collets in good condition. Believed to be equipped with a Fadal style retention knob. Model# CV40HPTG100080M Specifications: Collet Type: TG100. Collet Sizes: 1/8" 3/16" 7/32" Shank: CAT40. Projection: 2-3/4" Overall Length: 6-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL TG100 COLLET CHUCK ... moreW/ CAT40 SHANK& 3 COLLETS- 1/8" 3/16" 7/32" Reliable Tool Inc. c 2011 | Powered by
ATS COLLET CHUCK A2-8 5C
HI, WELCOME TO MY EBAY STORE UP FOR SALE IN VERY GOOD CONDITION ATS COLLET CHUCK MODEL A8-5C SPINDLE NOSE A2-8 ALSO COMES WITH DRAW BAR TAKE OFF NAKAMURA SC-300 THX FOR LOOKING!
NMTB 40 taper Collet Chuck 1-1/8" collet included LAIP 0405010206
NMTB 40 taper Collet Chuck 1-1/8" collet included LAIP 0405010206 used good working condition please see all photos if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent within 2 business days thank you for viewing
1-1/8" (1.125") Series 3 Tap Collet
Selling(3) 1-1/8" 1.125" Series 3 Tap Collet. Sold as is. Where is. All sales are final.
LYNDEX DA180 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS -1/8", 9/32" & 5/16"
aims LYNDEX DA180 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS-1/8" 9/32" 5/16" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Japan by Lyndex. This is a Collet Chuck with 3 Collets in good condition. Specifications: Collet Type: DA180. Shank: CAT40. Collet Sizes: 1/8" 9/32" 5/16" Projection: 4" Overall Length: 8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LYNDEX DA180 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS-1/8" 9/32" 5/16" Reliable Tool Inc. c 2011 | Powered ... moreby
JACOBS RUBBER FLEX COLLET CHUCK L-1 MOUNT + COLLETS 1/16"-1-3/8"***SUPERB***
JACOBS RUBBER FLEX COLLET CHUCK L-1 MOUNT + COLLETS 1/16"1-3/8"SUPERB* JACOBS RUBBER FLEX COLLET CHUCK L-1 MOUNT + COLLETS EXCELLENT CONDITION AS SHOWN. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
Square & hex collet blocks for 5c collets + 8 collets and wrench
Having retired I have no further use for these 5c collet blocks. I am offering one square block& one hex block. The wrench, 8 collets( 1/8 3/16 1/4 3/8 1/2 5/8 3/4& 1" All are in good used condition. They will be shipped USPS priority for $12.50. I have no idea of the value, so I am starting them at $1.00 and letting any interested bidders duke it out to determine there value. Happy bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13fd46bf9b7-0xfd-
CAT 40 Nikken Collet Chuck C7/8-90U
Nikken CAT 40 C 7/8-90U Power Chuck with 7/8 master collet and 3/16 in. sub collet. Shows light use in plastics application. Inv.20307) V25DE) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. ... moreAll international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
High Speed 25,000 RPM CAT 40 ER 25 x 8" Collet Chuck
High Speed 25.000 RPM CAT 40 ER 25 x 8" Collet Chuck Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best collet chuck on the market. Balanced to 25.000 RPM@ G2.5 0.0001" runout from shank to collet pocket. Insepection report inclued with each holder detailing accuracy& balance. Technical Specification: Part No. Description L1 D Collet Max. Shank T Wrench 22251, CAT 40 x ER 25, 8" 1.65" ER25" 630" 630x ... more2.0, 04615, Three reason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-
High Speed 25,000 RPM CAT 40 ER 16 x 8" Collet Chuck
High Speed 25.000 RPM CAT 40 ER 16 x 8" Collet Chuck Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best collet chuck on the market. Balanced to 25.000 RPM@ G2.5 0.0001" runout from shank to collet pocket. Insepection report inclued with each holder detailing accuracy& balance. Technical Specification: Part No. Description L1 D Collet Max. Shank T Wrench 22233, CAT 40 x ER 16, 8" 1.26" ER16.406" M10 x 1.5, ... more04609, Three reason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-25, E
KENNAMETAL SERIES 200 DA EXT. COLLET CHUCK WITH 21pc. COLLETS 1/16" - 3/8"
Hello. What I have up for bid is a KENNAMETAL SERIES 200 DA EXTENDED COLLET CHUCK& 21pc. COLLETS from 1/16" to 3/8" All in excellent condition. What you see is what you get.Nothing else! Thanks for looking!
High Speed 25,000 RPM CAT 40 ER 32 x 8" Collet Chuck
High Speed 25.000 RPM CAT 40 ER 32 x 8" Collet Chuck Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best collet chuck on the market. Balanced to 25.000 RPM@ G2.5 0.0001" runout from shank to collet pocket. Insepection report inclued with each holder detailing accuracy& balance. Technical Specification: Part No. Description L1 D Collet Max. Shank T Wrench 22259, CAT 40 x ER 32, 8" 1.97" ER32" 788" 788x ... more2.0, 04616, Three reason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-
MT2 Drill Collet - 1/8"
MT2 Collet x 1/8" diameter from an estate. Combine listings and I pass the savings on to you from combined shipping.
MT2 Drill Collet - 3/8"
MT2 Collet x 3/8" diameter from an estate. Combine listings and I pass the savings on to you from combined shipping.
5C COLLET RIGHT ANGLE HOLDER CHUCK 4 1/4 x 4 1/4 x 4 1/8 in MACHINIST TOOLS *F
5C COLLET RIGHT ANGLE HOLDER CHUCK 4 1/4 x 4 1/4 x 4 1/8 in MACHINIST TOOLS*F Info/Sizes: Excellent condition. Heavy brass collar, made in Taiwan Important travel notice for August- I will be traveling for several weeks in August. If you pay your invoice on time I will ship your item(s) before I leave. If not, your shipment can be delayed for over three weeks. Payment due within 48 hours of auctions close. If you are going to bid on other auctions contact me for a payment extension. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on ... moreeBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
TYPE ZZ DOUBLE TAPER COLLET CHUCK 1-3/4" SHANK W/ PAIR ZZ COLLETS 5/8" 3/4"
Type ZZ Double Taper Collet Chuck w/ Pair of Type ZZ Collets Double Taper Collet Shank Measures 1-3/4" Dia x 3-1/2" Length Overall Length 7" Includes Type ZZ Collets Size: 5/8" 3/4" Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
~2~ HARDINGE 5/8" 1C COLLET CHUCKS + 3 1C COLLETS
~2~ HARDINGE 5/8" 1C COLLET CHUCKS + 3 1C COLLETS, 2 HARDINGE 5/8" 1C COLLET CHUCKS + 3 COLLETS 2pcs-1/32. 1/8" ALL GOOD CONDITION AS SHOWN. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $8.00 USPS Priority Mail® Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
PRATT BURNERD COLLET CHUCK D1-8 MOUNT + "EE" COLLET ***XLNT***
PRATT BURNERD COLLET CHUCK D1-8 MOUNT +"EE" COLLET*XLNT* PRATT BURNERD MODEL"KC-25" D1-8 COLLET CHUCK. INCLUDEDS 1"EE" EXCELLENT CONDITION. NEW COST APPROX $4000.00 QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
2 TSD UNIVERSAL 91963 ACURA-FLEX COLLET CHUCKS,3/8" CAPACITY,CAT-40
Inventory Number: 06131820030 Manufacturer: Description: 2 TSD UNIVERSAL 91963 ACURA-FLEX COLLET CHUCKS.3/8" CAPACITY,CAT-40 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 2 BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: ... moreWe ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be func
PROCUNIER TAP COLLET CHUCK / EXTENSION W/ 1" SHANK (7/8" MACHINED) & 4 COLLETS
aims PROCUNIER TAP COLLET CHUCK/ EXTENSION W/ 1" SHANK(7/8" MACHINED) 4 COLLETS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Procunier Tap Collet Chuck with 4 Collets in good condition. Specifications: Collet Body Diameters: 3/4" Marked Sizes: 10(200" 12(225" 7/16" 9/16" Shank: 1" 3/4" Machined) Overall Length: 6-5/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PROCUNIER TAP COLLET CHUCK/ EXTENSION W/ 1" SHANK(7/8" MACHINED) 4 COLLETS Reliable Tool ... moreInc. c 2011 | Powered by
collet chuck, fits Emco Maximat 10 lathes,or others with a 1 1/2 x 8 headstock
Up for auction is a lightly used collet chuck-changer that came off a vintage Emco Maximat V10 lathe. There are no collets with it. But the one in the picture appears to fit it well.it is 27.66x27.77x27,81mm x 41.35long the round end was22.05mmlong the skinnyend wThe t```````````````````````````````````````````````as19.6 the colletchuck will fit on an Emco maximat V10 with an headthreaded of 1 x1/2 x 8
collet chuck set, 3mt chuck and collets. 1 1/2 x 8, fits Southbend, Logan&Emco
Up for auction is a very nice collet chuck and collet set. It features a screw-on chuck which has a mt3 taper. And a 1 1/2 x 8 screw thread. This chuck will fit most 9 and 10 inch Southbend lathes. As well as Logan, Emco Maximat 10, or other smaller lathes which have a Morse no. 3 taper and a 1 1/2 inch x 8 threaded head stock. Chuck comes with a nice little wooden rack that holds 5 collets that fit the chuck. They are 1/4. 5/16, 3/8, 1/2, and 5/8 inch size. There are also 4 smaller collets on the rack, but I am not sure what they fit into. Chuck and collets are both in good cosmetic and mechanical shape. And they function as intended. This is an older item that came with a vintage Logan lathe. I could not find any manufacturers mark. It is well machined and finished. Chuck and collets weigh about 2 pounds.
HARDINGE (1.375 )1 3/8 5C Step Chucks Collet
We have these nice Ground Solid original Hardinge 1"3/8 Collet For 1" 3/8 O.D. parts.500 deep no returns
Acura Mill Collet 3/8" 93000C2 collets
Acura Mill Collet 3/8" 93000C2 Item shows normal wear and tear.
40 TG 100 COLLETS 45 NMTB 1 Collet Chuck, 3 Endmill Holders 3/8" 1/2" 5/8"
40 TG 100 COLLETS. 45 NMTB Quick Change 1 Collet Chuck, 3 Endmill Holders Lot of 40 Scully and Jones TG100 collets. 1 NMTB 45 Erickson TG100 Collet chuck, 3 NMTB Endmill Holders 3/8" 1/2" and 5/8" Set screws are missing. No duplicates on the collets. Collets include common 1" 13/16" 5/8" 9/16" 1/2" 3/8" 1/4" 3/16" 1/8" Collets are all Scully and Jones and most are thick walled. S&J. These are in used condition. There is light surface rust on a few collets. Some wear on ends of endmill holders and TG100 collet chuck. There are no pull studs. The tray is not included. bt45 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1420780c1c5-0xf3-
ATS CNC LATHE NOSE COLLET CHUCK A1-8 MOUNT 735A-H60 35JTL ASSY.
ATS CNC LATHE NOSE COLLET CHUCK A1-8 MOUNT 735A-H60 35JTL ASSY.
USED SANDVIK CAT40 BALAS COLLET CHUCK 40MM-VF4-C8 (CAT-40 x C-8)
LISTING IS FOR A USED CAT40 BALAS COLLET CHUCK BRAND: SANDVIK PART# 40MM-VF4-C8 FOR USE WITH BALAS C 8 COLLETS(NOT INCLUDED) SHANK: CAT-40 CONDITION- GOOD USED SOME SURFACE RUST MICRO-PITTING ON TAPER LOTS OF SCORING ON CAP Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION ... moreEND. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE
CAT 40 ER20 COLLET CHUCK WITH 8" PROJECTION MACHINE SHOP TOOLING MACHINIST
YOU ARE PURCHASING THE PICTURED COLLET CHUCK. IT IS USED. THE TOOL IS LABELED: ER20 PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES! I SHIP(95% OR MORE) OF MY LISTINGS SAME DAY AS PAID IF PAID BY 3:00 P.M. EST. IF YOU MUST HAVE YOUR ITEMS SHIPPED SAME DAY PLEASE EMAIL OR CONTACT ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. I WILL COMBINE SHIPPING. I WILL SHIP WORLDWIDE. THANK YOU! LM STOCK. SHELF 21 TRAY 2 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1431c47e6e6-0xf4-
USED PARLEC NMTB50 DA200 DOUBLE ANGLE COLLET CHUCK DA-200 x 13-1/8" Gage USA
LISTING IS FOR A USED NMTB50 EXTENDED LENGTH DA200 COLLET CHUCK BRAND- PARLEC PART# CM688-2 STYLE- DA200 GAGE LENGTH- 13.125" SHANK- NMTB50 CONDITION- LIGHTLY USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, ... moreAMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE
300 Series Double Taper Collet Holder, Nut, and 3/8” Collet, Size ZZ
300 Series Collet Holder. Nut, and 3/8" Collet Style ZZ Letter L Double Taper Drill Size 2" They Have Been Used In Our Shop And Are In Good Condition Shipping& Payment: We welcome your questions before purchasing. Items will be shipped using UPS. Which includes free insurance up to $100. If you have any questions, please send us a message. We will do our best to answer all inquiries within 24 hours. Thank you for viewing this item. Please check out our other available items.
Hardinge Sjorgren Speed Chuck No.2-D6 w/ 19 Hardinge 2J Collet Set 1/8"- 1-5/16
Hardinge Sjorgren Speed Chuck No.2-D6 w/ 19 Hardinge 2J Collets Collet Sizes 1/8" 3/16" 5/32" 1/4" 11/32" 5/16" 3/8" 7/16" 1/2" 11/16" 5/8" 13/16" 29/32" 7/8" 1" 1-1/16" 1-1/8" 1-1/4" 1-5/16" Chuck is in very good working condition All Hardinge Collets are Used in nice condition as shown Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. All items are sent same day if bought and payed for before 12.00 noon Monday- Friday. Before 10Am Sat. If not it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store for more great items and friendly. Reliable ... morecustomer service. Thank You For Viewing
Armor Collet Chuck 1-1/2" 8 TPI Spindle South Bend Atlas Logan Sheldon
Fits a lathe with a 1-1/2"8 TPI Spindle. I only have a 1/4" armor collet. Missing the bottom clamp for the be. The yoke may have to be changed to fit your swing. Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-143206c488c-0xe9-
Quick Change Positive Drive Tap Collet 3/8" & 5/8" Machinist Tool
Up for AUCTION is the following item 2- Quick Change Positve Drive Tap Collets 3/8" 5/8" I am currently selling over 200 listings of Machinist Tools And Machinist Related Items Check Out my STORE SIGN UP and you will receive an email when I list new items. On multiple item purchases I DO REDUCE FREIGHT FOR DISCOUNT so please ask for shipping quote before bidding and I will respond ASAP! All international must ship USPS PRIORITY MAIL ONLY no exceptions. Please email any questions before bidding and I will reply ASAP! Powered by lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-1432cca9736-0xe3-
GRAND # 210 LATHE COLLET CHUCK 1 1/2" x 8 TPI ATLAS CRAFTSMAN LOGAN SOUTH BEND
GRAND# 210 LATHE COLLET CHUCK 1 1/2" x 8 TPI ATLAS CRAFTSMAN LOGAN SOUTH BEND Brand Grand Packaging None Condition Excellent Quantity 1 Takes B& S# 21 Collets. The handle is removable. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
5c collet fixture with 7/8 round Hardinge collet
5c collet fixture. Horizontal-Vertical with 7/8 round Hardinge collet, like new condition lightly used! Any questions.Please ask!
Jacobs 11/2" 8 Collet Closer with Set of 10 Collets .100 t0 i.062 English metric
Closer works good will fit any 1 1/2" 8 spindle Collets in good condition. Their is some nicks in the plastic on the closer handle
4-C Spindle Mount Collet Chuck with 1-1/8" x 7 Mount, from older Hardinge/Elgin
Offered here is a 4-C spindle mount collet chuck which has a 1-1/8" x 7 mounting thread. Included with the chuck is the assortment of collets shown in the picture. This shop had an older Elgin secondary operation lathe and 2 older Hardinge secondary lathes. All of which had the 1-1/8" x 7 spindle nose. This collet chuck would also be suitable for use on other lathes that accept this chuck. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-143bbe25313-0xf4-
USED KENNAMETAL ER8 COLLET CHUCK EXTENSION w/ ONE COLLET SS038ER08500 3/8"-Shank
LISTING IS FOR A USED KENNAMETAL COLLET CHUCK EXTENSION WITH ONE COLLET BRAND: KENNAMETAL MADE IN THE UNITED KINGDOM PART# SS038ER08500 SHANK: 375" OAL: 3.726" FOR USE WITH ER8 COLLETS( ONE 4.5mm COLLET IS INCLUDED) CONDITION: GOOD USED WAS SHORTENED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE ... moreMADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES
5c collet chuck for lathe- with spanner and 7/8 id collet. FREE Shipping to US.
5C collet nose for lathe. Used on 13" lathe, will fit smaller or larger with correct adaptor plate. Collet closes using clamping nut(photos 1. 2 and 3) which is turned using a bar in the outer holes in nut or a spanner(spanner is not included) 5" diameter. Approx. 5 inches long with collet installed(see photo 5) 3 hole mounting(photo 6) to your lathe adaptor. Hex Collet shown in photos 3 and 7 is for reference only and is NOT included. However there is a 7/8 collet included with the chuck. Photo 9(the last one) is for reference only to show what the chuck looks like installed on a lathe. not actual chuck and lathe is definitely not included) What you see in photos. Except for hex collet and photo 9, is what you get if you don't know what you are looking at ask questions for a quick response. Low starting bid and no reserve. ... moreExcellent opportunity to add this sought after accessory to your lathe at a very reasonable price. FREE shipping to the Continental US only all others will incur additional charges depending on location. Good luck bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-143bbe2525e-0xd9-
KENNAMETAL MICRO ER11 COLLET CHUCK KM2016NCMSS2216 WITH 1/8" COLLET IN IT
KENNAMETAL KM MICRO ER11 COLLET CHUCK PART NUMBER KM2016NCMSS2216. 7380CC5 22MM SHANK COMES WITH 1/8" COLLET IN IT, GOOD CONDITION. PLEASE CALL KEN WITH QUESTIONS. WE ARE A FULL LINE MACHINE TOOL DISTRIBUTOR. 800-756-7283#5544 2# WE SELL AND SHIP INTERNATIONALLY! PLEASE PAY WITH PAYPAL FOR FAST SHIPPING! WE DO NOT ACCEPT PERSONAL/BUSINESS CHECKS AS PAYMENT. WE SHIP OUR ITEMS VIA UPS GROUND. WE WILL LEAVE POSITIVE FEEDBACK UPON RECEIPT OF PAYMENT. WE JUST ASK THAT YOU DO THE SAME FOR US. THANK YOU! GOOD LUCK BIDDING! We stand behind all the products that we sell. If you are not satisfied with the item you have purchased. Please contact us BEFORE you leave feedback so we can work it out. If you post negative feedback before you contact us. The item is yours to keep. Thank you. Powered by The free listing tool. List your items fast and ... moreeasy and manage your active items.
TSG UNIVERSAL COLLET CHUCK CAT 50 SHANK W/ 750 MILLING CHUCK 3/8"
TSG Universal Collet Chuck w/ CAT 50 Holder Includes 3/8" 750 Milling Chuck Collet CAT 50 Holder Length 4-1/4" Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay ... moreauction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
Spindle Nose Handwheel Collet Set w/ 16 Collets - 1 1/2" x 8 TPI / A 259
Hello Folks. Today we have a 1 1/2" x 8 TPI(fits larger Atlas Lathes) Spindle Nose Collet with Handwheel Set that includes a total of 16 Collets: 3/32" Hardinge, 1/8" 5/32" 1/4" Hardinge, 5/16" 3/8" Hardinge, 7/16" Hardinge, 1/2" 1/2" Hardinge, 5/8" Hardinge, 3/4" Hardinge, 13/16" Hardinge, 7/8" Hardinge, 15/16" Hardinge, Unmarked(measures 1" and Marked 840( looks damaged) No brand names or marks on the collet holder, except the handwheel is marked"GE" Textolite" which is a fiber type material with no damages, a solid usable tool. There are some marks from a pipe wrench on half that threads on to spindle, please see close up pics. The unmarked 1/2" Collet has a hex shaped opening, and does have a small chip, please see close up pic. Thank you ... morefor shopping with us today. And please check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days, and you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
Lathe 1 1/2"x 8 TPI Spindle Nose Collet Chuck w/ 3 Collets / Fits Atlas MR 135
Hello Folks. I could not find the brand name on this Collet Chuck, will fit Atlas l0& 12" lathes- 1 1/2" x 8 TPI with 7/8" 3/4" and 5/8" collets. No wrench included. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
USED VALENITE CAT45 TG100 EXTENDED LENGTH COLLET CHUCK CAT-45 x TG-100 x 8" Gage
LISTING IS FOR A USED CAT45 TG100 EXTENDED LENGTH COLLET CHUCK BRAND: VALENITE STYLE: TG100 SHANK: CAT45 GAGE LENGTH: 8.00" TG100 COLLETS NOT INCLUDED CONDITION: GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, ... moreAMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE C
5MT COLLET CHUCK & 7 COLLETS 1/2" to 1-3/8" for K O Lee ? tool & Cutter Grinder
This sale is for ONE#5 MORSE TAPER COLLET CHUCK with 7 COLLETS. The chuck does not have any manufacturing or makers marks on it but it did come with a K O Lee tool and cutter grinder. It has an overall length of 8-1/2" and a maximum diameter of 3-3/8" Please note that this tool has some staining from old packaging grease and some minor surface oxidization. There are also a few grind marks on the face of the chuck. This sale includes 7 Teledyne Flex 1500 collets with sizes: 1/2" 5/8" 3/4" 7/8" 1" 1-1/4" 1-3/8" Each collet, with exception of the 1" comes in its original packaging. Please note that the packaging is dirty and worn from warehouse storage and that the collets may have some staining from old packaging grease. These high quality made COLLET CHUCK& COLLETS are being offered at ... morean exceptional price. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suit
Hardinge S26 Collet Chuck Nose Closer A2-8 Mori Okuma Mazak Cnc Lathe Leblond
This sale is for a complete Hardinge A2-8 Mount S26 College chuck assembly. This item is in stock and ready for immediate shipment. If you have any questions or would like to make an offer please call or text me at 573-578-9890. Posted with
HARDINGE SJOGREN SPEED COLLET CHUCK A1-8 MOUNT WITH 2J COLLETS
HARDINGE SJOGREN SPEED COLLET CHUCK A1-8 MOUNT WITH 2J COLLETS. 6 COLLETS SIZES: 1/4, 3/8, 7/16, 1/2, 3/4, AND 1"
Vintage GOODELL-PRATT Compression Chuck #129 w/3/8" Collet #125 & #494 Lathes
For auction is this Vintage GOODELL-PRATT Compression Chuck#129 with a 3/8" Collet. For use on#125& 494 Lathes. Made in Greenfield. Mass, USA. Comes in the original box. The chuck and collet are in good condition. The box shows wear. FREE DOMESTIC SHIPPING.
Acura Mill Collet 5/8" 9300004 collets
Acura Mill Collet 5/8" 9300004 Item shows normal wear and tear. The pic is of similar collet. Just different size.
VINTAGE REED PRENTICE LATHE 12 COLLET SET & COLLET CHUCK 1/8" to 7/8" WOOD BOX
This auction is for a vintage set of 12 Reed-Prentice lathe collets and a collet chuck in a wood box. There are 12 collets in sizes 1/8. 1/4, 1/4, 5/16, 3/8, 7/16, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8" and collet chuck. I don't know what make or size lathe they might fit so take a good look at the pictures and let me know if you need more pictures or measurements. Email me with any questions before bidding or for an international shipping quote. This set is heavy around 40 lb and the ebay shipping calculator has been having trouble getting quotes correct costing one of of us in the end so send me your zip code and I'll get you the best price i can using either USPS, UPS or FedEx. I charge only the actually cost to ship your item and do combine when possible and will consider all fair offers. Check out my!
Burnerd KC-15 Collet Chuck D1-8
Some light surface rust on outside of chuck from storage but nothing that affects function. Mounting is D1-8
USED DA 300 COLLET CHUCK & 1/8" COLLET 5" OAL X 1/2" SHANK 532
YOU ARE BIDDING ON ONE USED DA 300 COLLET CHUCK& 1/8" COLLET 5" OAL X 1/2" SHANK DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
Warner Swasey #5 3" master collet chuck LATHE SPINDLE NOSE CHUCK A1-8 MOUNT ?
5 1A Warner& Swasey Master Collet + Spindle nose collet chuck 1 1/2" collet Pads included as shown Collet master Chuck 4669-1001 to Accept 4669-1165 3" Round 4669- 1166 2-5/8" HEX. 4669- 1167 2-1/8" Square Collet pads A1-8 MOUNT? additional sizes are shown in photos All included as shown all in nice condition if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent the same or next business day thank you for viewing ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14523f5f818-0x10a-
Jacobs Rubber-Flex Collet Chuck for South Bend Lathes, 1-3/8" Cap.nopl INV=12219
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Jacobs Rubber-Flex 1-3/8" Diameter Capacity Collet Chuck. 2-1/4" Threaded back plate to fit South Bend Lathes with 2-1/4" threaded spindle noses. This collet chuck operates smoothly; opening and closing correctly. The nose-piece is easily removed for collet changes. The size if 2-1/4" or 2 3/8" a bit hard to measure) by 6 TPI(for sure) The threaded mounting is marked with the South Bend Lathe logo The threads are DEFINITELY 2 1/4-6 TPI. Do not ask us again to double check those threads. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the ... moreexclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
Help