|
USED KEARNEY TRECKER K&T SINGLE ANGLE TG100 COLLET CHUCK (1.750"-shank) TG-100
LISTING IS FOR A USED KEARNEY TRECKER K&T TG100 COLLET CHUCK BRAND- PART# STYLE- TG100 COLLETS ARE NOT INCLUDED SHANK- 1.750" OAL- 5.875" CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY ... moreBE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS ARE UNPAID WITHIN THE 7 B
|
|
|
BALAS 4MT-C8-1 COLLET CHUCK C8 ON A 4 MORSE TAPER INSIDE A 1-3/4” DIA. SHANK
BALAS 4 MT-C8-1 COLLET CHUCK C8 ON A 1-3/4” SHANK THE COLLET CHUCK IS USED. IT COMES WITH 1 COLLET& THE DRILL BIT AS PICTURED.
|
|
|
Lot of 15 Assorted Adjustable1 1/6 Morse 2" Taper 3 5/8 Shank
SEARCH OUR PRODUCTS Lot of 15 Assorted Adjustable1 1/6 Morse 2" Taper 3 5/8 Shank Product Description This is a Lot of 15 Adjustable Morse Taper Automotive Shank Assemblies. These parts are used and have minor scratches on their surfaces. We did not test these parts. Included Items: Qty(1) 68731 48097 Qty(1) 68732 with nut# 1 1/16-12-627 Qty(1) 17283 SJ-9C with nut# 1 1/16-12 17255 SJ-9B Qty(2) 17283 SJ-7A with nut# 1 1/16-12-16 Qty(1) 17284 SJ-9D with nut# 1 1/16-12 17255 SJ-9E Qty(1) 17283 SJ-FA with nut# 1 1/16-12 17255 SJ-FC Qty(1) 17284 SJ-7C with nut# 1 1/16-12 17255 SJ-LA Qty(1) 17284 SJ-BB with nut# 1 1/16-12-627 Qty(1) 17284 SJ-2 with nut# 1 1/16-12-627 Qty(1) 17283 SJ-GB with nut# 1 1/16-12 17255 SJ-KA Qty(1) 17283 952617 Qty(1) 17284 SJ-9D with nut# 1 1/16-12 17255 SJ-9E Qty(1) 68732 Qty(1) 17283 952617 Specifications: Inside ... moreTaper: 2" Shank Diameter: 1 1/16" Overall Length: 3" The photos show the actual lot. Only what is pictured comes with this auction. Nothing else is included. SKU: I44J038 Warranty Information The item/s in this auction are being sold AS-IS with no warranty. No refunds, no returns. Please bid accordingly. Contact Info Business Hours- toll free: 877) 328-9236- local: 512) 933-0081- fax: 512)873-0745 Monday to Friday from 8:30 am to 5:30 pm CST Closed on Saturday and Sunday Company Policies PayPal Must ship to a confirmed address, Visa/MasterCard/Discover/Amex US and Canadian issued cards only. Must ship to the billing address of the credit card. Orders over $1.000 require a signed. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. We do not allow the buyer to arrange their own shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. The buyer is responsible for any customs. Duties, taxes, broker fees, etc that are incurred
|
|
|
USED UNIVERSAL ENG. SERIES "Y" DOUBLE TAPER COLLET CHUCK 562030 (1"-Shank)
LISTING IS FOR A USED DOUBLE TAPER COLLET CHUCK BRAND- UNIVERSAL ENGINEERING PART# 562 030 DOUBLE TAPER SERIES" Y" SHANK- 1.00" OAL- 7.250" CONDITION- WELL USED MILLING MARKS ON SHANK Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN ... moreTHE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS AR
|
|
|
VALENITE ER16 Collet Chuck 1/2" Shank Diameter
ebay template Valenite ER16 Collet Chuck 1/2" Straight Shank SPECIFICATIONS catalog number collet series D D11 L lbs VE05035616 ER16 1/2" 0.87" 7.00" 36*Specifications subject to verification Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery Exchange reserves the right to re-list or re-sell a purchased item ... moreif we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need detailed information on this items availability. We will do our best to
|
|
|
HEAVILY USED SANDVIK BALAS C3 FLEXI-GRIP COLLET CHUCK S8-6-C3-1 (1"-Shank) C-3
LISTING IS FOR A USED BALAS C3 COLLET CHUCK BRAND- SANDVIK MADE IN GERMANY PART# S8-6-C3- 1 SHANK DIAMETER- 1.00" OAL- 6.75" USES C3 SERIES BALAS COLLETS(NOT INCLUDED) CONDITION- HEAVILY USED SURFACE RUST PITTING ON SHANK Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS ... moreDAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YO
|
|
|
TECHNIKS ER11 Collet Chuck 1/2" Shank Diameter
ebay template TECHNIKS ER11 Collet Chuck 1/2" Straight Shank SPECIFICATIONS catalog number collet series D D11 L lbs 1/2"xER11M-140 ER11 1/2" 0.63" 6.25" 25*Specifications subject to verification Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery Exchange reserves the right to re-list or re-sell a purchased ... moreitem if we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need detailed information on this items availability. We will do ou
|
|
|
HERTEL ER11 Collet Chuck 1/2" Shank Diameter
ebay template H ERTEL ER11 Collet Chuck 1/2" Straight Shank SPECIFICATIONS catalog number collet series D D11 L lbs HSS050ER11400 ER11 1/2" 0.63" 4.00" 6*Specifications subject to verification Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery Exchange reserves the right to re-list or re-sell a purchased item ... moreif we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need detailed information on this items availability. We will do our best t
|
|
|
KENNAMETAL ER11 Collet Chuck 1/2" Shank Diameter
ebay template ER11 Collet Chuck 1/2" Straight Shank SPECIFICATIONS catalog number collet series D D11 L lbs SS050ER11700 ER11 1/2" 0.63" 7.00" 26*Specifications subject to verification Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery Exchange reserves the right to re-list or re-sell a purchased item if we ... moredo not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need detailed information on this items availability. We will do our best to expedi
|
|
|
HERTEL ER11 Collet Chuck Collet Extension 1/2" Shank Diameter End Mill Holder
ebay template HERTEL ER11 Collet Chuck Extension 1/2" Straight Shank SPECIFICATIONS Part Number Collet Series"C" Dia(A) Dia(B) Depth(D) OAL HSS050ER11400 ER11 4" 50" 615" 1.09" 4.71" Specifications subject to verification Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery Exchange reserves ... morethe right to re-list or re-sell a purchased item if we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need detailed information
|
|
|
Lyndex Nikken K1 1/4-SK10-150 staight shank collet chuck holder for SK10 collets
3-Nikken K1 1/4-SK10-150 straight shank slim chuck holders. Uses series SK10 collets. 1-1/4 dia. shank Hole thru for thru coolant. Drilling. Milling, reaming, tapping, recessesing etc. The catalog says.0002 T.I.R. Came out of high precision shop.
|
|
|
PAIR OF KENNAMETAL 1" MILLING CHUCK W/ CAT40 SHANK CV40HPSD75325
aims PAIR OF KENNAMETAL 1" MILLING CHUCK W/ CAT40 SHANK CV40HPSD75325 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Kennametal. This is a Milling Chuck& Collet in very good condition. Model# CV40HPSD75325 Over the next few days. We will be putting up a large assortment of CAT40 Tool Holders. Be sure and check out our other listings! Specifications: Collet Capacity: 1" Size: 1" Knob Type: Believed to be a Haas(Short) Shank: ... moreCAT40. Projection: 3-1/8" Overall Length: 6-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF KENNAMETAL 1" MILLING CHUCK W/ CAT40 SHANK CV40HPSD75325 Reliable Tool Inc. c 2011 | Powered by
|
|
|
USED ER25 COLLET CHUCK EXTENSION (1.00"-Shank) ER-25
LISTING IS FOR A USED ER25 COLLET CH UCK EXTENSION BRAND- PART# 025 EXT 100 STYLE- ER25 SHANK- 1.00" OAL- 6.625" CONDITION- GOOD USED LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS ... moreAND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.535.83
|
|
|
USED BALAS C16 FLEXI-GRIP COLLET CHUCK S24-8"-C16-1 (3.00"-SHANK) C-16
LISTING IS FOR A USED BALAS C16 COLLET CHUCK BRAND- BALAS PART# S24-8"C16-1 SHANK DIAMETER- 3.00" OAL- 10.375" USES C16 SERIES BALAS COLLETS(NOT INCLUDED) CONDITION- GOOD USED COMES WITHOUT BOTH BALL BEARING& FLAT WASHERS Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES ... moreWHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSIN
|
|
|
USED BALAS C8 FLEXI-GRIP COLLET CHUCK S14-6-C8 (1.75"-SHANK) C-8
LISTING IS FOR A USED BALAS C8 COLLET CHUCK BRAND- BALAS PART# S14-6-C8 SHANK DIAMETER- 1.75" OAL- 7.625" USES C8 SERIES BALAS COLLETS(NOT INCLUDED) CONDITION- GOOD USED COMES WITHOUT BOTH BALL BEARING& FLAT WASHERS Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ... moreARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAY
|
|
|
USED BALAS C12 FLEXI-GRIP COLLET CHUCK S14-6-C12-1 (1.75"-SHANK) C-12
LISTING IS FOR A USED BALAS C12 COLLET CHUCK BRAND- BALAS PART# S14-6-C12-1 SHANK DIAMETER- 1.75" OAL- 8.875" USES C12 SERIES BALAS COLLETS(NOT INCLUDED) CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ... moreITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS ARE UNPAID WIT
|
|
|
BALAS S20-8"-C12-1 COLLET CHUCK C12, 2-1/2” OD. SHANK WITH INTERNAL THREADS
BALAS S20-8"C12-1 COLLET CHUCK C12. 2-1/2” OD. SHANK WITH INTERNAL THREADS THE COLLET CHUCK IS USED. IT COMES WITH 1 COLLET& THE END MILL AS PICTURED. I CAN ASSURE YOU THIS IS SHARP AFTER DROPPING IT ON MY FOOT AND GOING TO THE ER)
|
|
|
COLLET CHUCK-SJOGREN-1 1/4" ST SHANK-SEE DESCRIPTION
COLLET CHUCK#30355SJ-THINK SJ MAY BE-SJOGREN)1 1/4" ST SHANK-NOSE RING#95380SJ- USED-IN GOOD CONDITION 2 SET SCREW FLATS GROUND ON SHANK INV#61602 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
COMMAND TENSION/COMPRESSION TAP CHUCK w/ 1" SHANK + COLLETS
aims COMMAND TENSION/COMPRESSION TAP CHUCK w/ 1" SHANK + COLLETS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A by Command This is a Quick Change Tension and Compression Tap Chuck in Good condition. Model# XSTH-0001 Specifications: Shank: 1" Straight. Projection: 2-5/8" Overall Length: 8-1/2" Includes 5 Tap collet. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. COMMAND TENSION/COMPRESSION TAP CHUCK w/ 1" SHANK + COLLETS COMMAND TENSION/COMPRESSION TAP CHUCK w/ 1" SHANK + COLLETS ... moreReliable Tool Inc. c 2011 | Powered by?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13efa03208f-0x100-
|
|
|
TWO CRAFTSMAN DA100 COLLET CHUCK EXTENSIONS W/ 1" SHANK & 1 COLLET
aims TWO CRAFTSMAN DA100 COLLET CHUCK EXTENSIONS W/ 1" SHANK& 1 COLLET read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Craftsman. This is a Lot of 2 Collet Chuck Extensions& 1 Collet in good condition. Model# TE100-1000 Specifications: Shank: 1" Collet Type: DA100. Collet Size: 1/2" Overall Length: 7-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TWO CRAFTSMAN DA100 COLLET CHUCK EXTENSIONS W/ 1" SHANK& 1 COLLET Reliable Tool Inc. c 2011 | Powered by
|
|
|
ER-40 COLLET CHUCK,R8 SHANK,W/FOURTEEN(14) COLLETS,ONE(1)END MILL
Inventory Number: 05130510427 Manufacturer: Description: ER-40 COLLET CHUCK.R8 SHANK,W/FOURTEEN(14) COLLETS,ONE(1)END MILL Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1 LOT, AS SHOWN, SIZES VARY ON COLLETS BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing ... moreon auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of t
|
|
|
12 DOUBLE ANGLE COLLET CHUCKS,DA300,1/2"-16 AUTO SHANK
Inventory Number: 05131540023 Manufacturer: Description: 12 DOUBLE ANGLE COLLET CHUCKS.DA300,1/2"16 AUTO SHANK Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 12, EACH MEASURES 4-1/8" OVERALL LENGTH, WITH ONE COLLET, TOTAL- TWELVE: COLLET CHUCKS, TWENTY-ONE COLLETS, THIRTEEN: COLLET NUTS BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need ... moreto notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have mul
|
|
|
USED DOUBLE ANGLE DA-400 COLLET CHUCK (1.50"-Shank) DA400
LISTING IS FOR A USED DOUBLE ANGLE DA400 COLLET CHUCK BRAND- PART# COLLET STYLE- DOUBLE ANGLE SHANK TYPE- STRAIGHT SHANK COLLET SERIES- DA-400 OAL- 10.50" SHANK- 1.50" CONDITION- GOOD USED COLLETS ARE NOT INCLUDED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE ... moreSHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS D
|
|
|
USED MAGIC CHUCK #3 MASTER HOLDER with #5MT-Shank (Holds 1-11/16" Collets)
LISTING IS FOR A USED MAGIC CHUCK MASTER HOLDER BRAND- COLLIS PART# 63735 CHUCK SIZE- 3 COLLET HOLE DIAMETER- 1-11/16" SHANK- 5 MT CONDITION- GOOD USED MANY NICKS AND DI NGS ON TAPER Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. ... moreSOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS ARE
|
|
|
NICE! NIKKEN BT-30 SHANK SK-16 SLIMCHUCK HOLDER COLLET CHUCK W/ 1/8" COLLET
Made by Nikken This is a Slimchuck Holder collet chuck with collet in good condition. There were originally 9 of these tool holders available for sale here.check the number above for the number currently available. All are in similar condition as the one shown in the pictures. If more than one is purchased. Shipping is charged for the first one only and the others ship free in the same box. Model Number: BT30-SK16-60 Specifications: Shank: BT30 Collet Tool Holding Capacity: 1/8" Overall Length: 5" Comes in the same condition as the one shown in pictures. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f274a7ca6-0x100-
|
|
|
TWO (2) 30 TAPER SHANK MILLING ER COLLET CHUCKS CNC with TWO 1/2" FLEX COLLETS
TWO(2) 30 TAPER SHANK MILLING ER COLLET CHUCKS CNC with TWO 1/2" FLEX COLLETS Unsure of manufacturer. But definately of high quality. Nice pair of 30 Taper Collet Chucks. Complete with a 1/2" capacity ER Collet for each. Comes with the two retention knobs shown fitted on holders. Comes as shown in photos. WE VALUE OUR CUSTOMERS IF ANY DISCREPANCY WITH DESCRIPTION PLEASE INFORM US. PLEASE NOTE: Unit MUST be removed from our facility within one week of end of auction. FREE SHIPPING TO LOWER 48 STATES ONLY Sales Tax will apply to items sold to buyers who take delivery in California. We will send this unit via UPS. We do not charge handling fees; high bidder pays actual shipping charges. Item may be picked up from Northridge location. Be sure to check out my other listings on Ebay. Item will immediately be re-listed if payment is not ... morereceived within 5 working days. Please contact seller if for any reason payment cannot be made on time. Check out the photos provided. Thank you for looking and Good Luck! X)
|
|
|
2ND LOT OF 6 COLLET CHUCKS -UNIVERSAL ENG. DOUBLE TAPER, SERIES XZ (1.75" SHANK)
LISTING IS FOR A 6 PIECE LOT OF UNIVERSALENGINEERING DOUBLE TAPER COLLET CHUCKS SHANK- 1.75" SERIES- XZ" XZ TAPER COLLETS ALSO AVAILABLE IN SELECT SIZES PLEASE CHECK OTHER LISTINGS OR ASK FOR MOREINFORMATION REGARDING COLLET AVAILABILITY SHIPPING AND HANDLING: BUYERS ARERESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WEDO OFFER LOCAL PICK-UP OF ITEMS AT VANAMATIC CO. IN DELPHOS OH PLEASEARRANGE AHEAD OF TIME PAYMENTOPTIONS: PAYMENT MUSTBE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IFITEMS ARE UNPAID WITHIN THE 7 BUSINESS DAY TIME PERIOD, ITEMSWILL BE RE-LISTED-WEACCEPT PAYPAL ONLY LEGAL: PURCHASERASSUMES ALL RISK OF LIABILITY WITH RESPECT TOTHE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD VANAMATIC ANDITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSINGOR OPERATION OF ITEM PURCHASED.
|
|
|
ER32 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS - 1/2", 21/32" & 3/4"
aims ER32 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- 1/2" 21/32" 3/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Collet Chuck& 3 Collets in good condition. Features: Equipped with a Haas style retention knob. Specifications: Collet Type: ER32. Collet Sizes: 1/2" 21/32" 3/4" Shank: CAT40. Projection: 2-3/4" Overall Length: 6-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ER32 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- 1/2" 21/32" 3/4" Reliable Tool ... moreInc. c 2011 | Powered by
|
|
|
TECHNIKS ER20 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS - 1"
aims TECHNIKS ER20 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- 1" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Tecniks. This is a Collet Chuck& 3 Collets in good condition. Specifications: Collet Type: ER20. Collet Sizes: 1/8" 7/16" 1/2" Shank: CAT40. Projection: 2-1/2" Overall Length: 7" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TECHNIKS ER20 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- 1" Reliable Tool Inc. c 2011 | Powered by
|
|
|
JAPAN! LYNDEX TG100 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS - 1/2", 5/8" & 3/4"
aims JAPAN! LYNDEX TG100 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- 1/2" 5/8" 3/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Japan by Lyndex. This is a Collet Chuck with 3 Collets in good condition. Appears to be equipped with a Haas style retention knob. Model# C40S7-1000 Specifications: Collet Type: TG100. Shank: CAT40. Collet Sizes: 1/2" 5/8" 3/4" Projection: 2-1/2" Overall Length: 6-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. JAPAN! LYNDEX TG100 COLLET CHUCK ... moreW/ CAT40 SHANK& 3 COLLETS- 1/2" 5/8" 3/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
BALAS # S8-6"-C3-1 COLLET CHUCK WITH 5 COLLETS 1" DIA. SHANK DRILL MILLING ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Balas Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Collets: 9/32" 15/64" 2) 21/64" 5/16" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
U.S.A!! CRAFTSMAN DA100 COLLET CHUCK EXTENSION W/ 1" SHANK # TE100-1000
aims U.S.A! CRAFTSMAN DA100 COLLET CHUCK EXTENSION W/ 1" SHANK# TE100-1000 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Craftsman. This is a Collet Chuck Extension& 3 Collets in good condition. Model# TE100-1000 Specifications: Shank: 1" round) Collet Type: DA100. Collet Sizes: 1/2" 5/16" 1/4" Overall Length: 7-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! CRAFTSMAN DA100 COLLET CHUCK EXTENSION W/ 1" SHANK# TE100-1000 Reliable Tool Inc. c 2011 | Powered ... moreby
|
|
|
KENNAMETAL 1/2" MILLING CHUCK W/ CAT40 SHANK CV40EM050262
aims KENNAMETAL 1/2" MILLING CHUCK W/ CAT40 SHANK CV40EM050262 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kennametal. This is a Tool Holder good condition. Believe to be equipped with a Haas style retention knob. Model# CV40EM50262 Specifications: Holder Capacity: 1/2" Shank: CAT40. Projection: 3-7/8" Overall Length: 6 1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL 1/2" MILLING CHUCK W/ CAT40 SHANK CV40EM050262 Reliable Tool Inc. c 2011 | Powered by
|
|
|
KENNAMETAL 1" MILLING CHUCK W/ CAT40 SHANK CV40EM100400
aims KENNAMETAL 1" MILLING CHUCK W/ CAT40 SHANK CV40EM100400 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kennametal. This is a Tool Holder good condition. Believe to be equipped with a Haas style retention knob. Model# CV40EM100400 Specifications: Holder Capacity: 1.00" Shank: CAT40. Projection: 3-7/8" Overall Length:8 1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL 1" MILLING CHUCK W/ CAT40 SHANK CV40EM100400 Reliable Tool Inc. c 2011 | Powered by
|
|
|
KENNAMETAL TG100 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS - 1/8", 3/16" & 7/32"
aims KENNAMETAL TG100 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- 1/8" 3/16" 7/32" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Kennametal. This is a Collet Chuck& 3 Collets in good condition. Believed to be equipped with a Fadal style retention knob. Model# CV40HPTG100080M Specifications: Collet Type: TG100. Collet Sizes: 1/8" 3/16" 7/32" Shank: CAT40. Projection: 2-3/4" Overall Length: 6-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL TG100 COLLET CHUCK ... moreW/ CAT40 SHANK& 3 COLLETS- 1/8" 3/16" 7/32" Reliable Tool Inc. c 2011 | Powered by
|
|
|
Universal Engineering Zz Collet Chuck 1-1/2 Straight Shank #55158 With Collet
Collet chuck zz style with 1 1" collet. Everything threads as it should. Posted with
|
|
|
USED KENNAMETAL HOLDER SS100FC108659 CK 11 1" SHANK 1138
YOU ARE BIDDING ON ONE USED KENNAMETAL HOLDER SS100FC108659 CK 11 1" SHANK DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USED CRAFSMAN COLLET CHUCK DA 300 6-3/4" OAL X 1/2" SHANK 1147
YOU ARE BIDDING ON ONE USED CRAFSMAN COLLET CHUCK DA 300 6-3/4" OAL X 1/2" SHANK DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LYNDEX DA180 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS -1/8", 9/32" & 5/16"
aims LYNDEX DA180 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS-1/8" 9/32" 5/16" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Japan by Lyndex. This is a Collet Chuck with 3 Collets in good condition. Specifications: Collet Type: DA180. Shank: CAT40. Collet Sizes: 1/8" 9/32" 5/16" Projection: 4" Overall Length: 8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LYNDEX DA180 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS-1/8" 9/32" 5/16" Reliable Tool Inc. c 2011 | Powered ... moreby
|
|
|
ACURA-FLEX (AF) COLLET CHUCK W/ 1" SHANK & 1 COLLET - 3/16"
aims ACURA-FLEX(AF) COLLET CHUCK W/ 1" SHANK& 1 COLLET- 3/16" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Collet Chuck& Collet in good condition. Specifications: Collet Type: Acura-Flex(AF) Collet Sizes: 3/16" Shank: 1" Projection: 3-1/2" Overall Length: 5-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ACURA-FLEX(AF) COLLET CHUCK W/ 1" SHANK& 1 COLLET- 3/16" Reliable Tool Inc. c 2011 | Powered by
|
|
|
PAIR OF HEAVY DUTY TG75 COLLET EXTENSIONS W/ 1-1/4 SHANK + COLLETS
aims PAIR OF HEAVY DUTY TG75 COLLET EXTENSIONS W/ 1-1/4 SHANK + COLLETS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Lot of 2 Collet Extensions& Collets in very good condition. Specifications: Collet Type: TG75. Collet Size: 47/64" 11/32" 7/16" Shank: 3/4" Overall Length: 8-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF HEAVY DUTY TG75 COLLET EXTENSIONS W/ 1-1/4 SHANK + COLLETS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Universal Engineering Xz 55187 Collet Chuck With Collet 1-1/2" Straight Shank
See pics of the item you will receive! Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13fca0bc937-0x100-
|
|
|
Universall Engineering Zz Collet Chuck With Collet 55158 1-1/2 Straight Shank
See pics of item you will receive! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13fd853a2d0-0x101-
|
|
|
PROCUNIER TAP COLLET CHUCK W/ 1" SHANK & 6 COLLETS
aims PROCUNIER TAP COLLET CHUCK W/ 1" SHANK& 6 COLLETS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Procunier Tap Collet Chuck with 6 Collets in good condition. Specifications: Collets Outside Diameter: 1/2" Collet Inside Diameters Range: 170" to.318" Shank: 1" Overall Length: 4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PROCUNIER TAP COLLET CHUCK W/ 1" SHANK& 6 COLLETS Reliable Tool Inc. c 2011 | Powered by
|
|
|
TYPE ZZ DOUBLE TAPER COLLET CHUCK 1-3/4" SHANK W/ PAIR ZZ COLLETS 5/8" 3/4"
Type ZZ Double Taper Collet Chuck w/ Pair of Type ZZ Collets Double Taper Collet Shank Measures 1-3/4" Dia x 3-1/2" Length Overall Length 7" Includes Type ZZ Collets Size: 5/8" 3/4" Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
HPI ER16 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS - 3/16", 1/4" & 5/32"
aims HPI ER16 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- 3/16" 1/4" 5/32" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by HPI. This is a Collet Chuck& 3 Collets in good condition. Believed to be equipped with a Haas style retention knob. Model# CAT40-ER16H-60 Specifications: Collet Type: ER16. Collet Sizes: 3/16" 1/4" 5/32" Shank: CAT40. Projection: 2-1/4" Overall Length: 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HPI ER16 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- ... more3/16" 1/4" 5/32" Reliable Tool Inc. c 2011 | Powered by
|
|
|
TECHNIKS ER16 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS - 1/4", 7/32" & 13/32"
aims TECHNIKS ER16 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS- 1/4" 7/32" 13/32" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Techniks. This is a Collet Chuck& 3 Collets in good condition. Believed to be equipped with a Haas style retention knob. Model# SYIC-22227-N Specifications: Collet Type: ER16. Collet Sizes: 1/4" 7/32" 13/32" Shank: CAT40. Projection: 4" Overall Length: 7-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TECHNIKS ER16 COLLET CHUCK W/ CAT40 SHANK& ... more3 COLLETS- 1/4" 7/32" 13/32" Reliable Tool Inc. c 2011 | Powered by
|
|
|
USED K&T KEARNEY TRECKER 1-1/2" SHELL MILL ARBOR 1.50" SMA (2.25"-Shank)
LISTING IS FOR A K&T SHELL MILL ARBOR BRAND- PILOT DIAMETER- 1.500" SHANK- 2.250" OVERALL LENGTH- 9.50" CONDITI ON- WELL USE D A FEW NICKS AND DINGS ON SHANK Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, ... moreAMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE A
|
|
|
PROCUNIER TAP COLLET CHUCK / EXTENSION W/ 1" SHANK (7/8" MACHINED) & 4 COLLETS
aims PROCUNIER TAP COLLET CHUCK/ EXTENSION W/ 1" SHANK(7/8" MACHINED) 4 COLLETS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Procunier Tap Collet Chuck with 4 Collets in good condition. Specifications: Collet Body Diameters: 3/4" Marked Sizes: 10(200" 12(225" 7/16" 9/16" Shank: 1" 3/4" Machined) Overall Length: 6-5/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PROCUNIER TAP COLLET CHUCK/ EXTENSION W/ 1" SHANK(7/8" MACHINED) 4 COLLETS Reliable Tool ... moreInc. c 2011 | Powered by
|
|
|
DA200 COLLET CHUCK EXTENSION 1" SHANK 7" OAL
DA200 COLLET CHUCK EXTENSION 1" SHANK 7" OAL INCLUDES ONE DA 200 COLLET
|
|
|
ONE TG-100 Collet Tool Holder, 1" Dia. Collet Capacity, 2" Dia. Shank INV=12628
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Collet-Type Tool Holder for TG-100"Tremendous Grip" Collets. 1" Diameter maximum collet capacity. 2" Diameter tool holder shank. This listing is for ONE holder. Bid on quantity more than one to get several. I have several available. Shank lengths vary from approx. 3.15" to 3.45" NOTE: No collets are included with the tool holder. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. ... morePlease do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
|
|
|
Erickson Double Angle Collet Chuck SS100DA 104731 100DA 5/16" Collet 1" shank
Erickson Double Angle Collet Chuck SS100DA 104731 100DA 5/16" Collet Included as shown 1" shank IF YOU WOULD LIKE ANY MORE PHOTOS OF HAVE ANY QUESTION PLEASE CONTACT ME PICKUP IS AVAILABLE ITEMS CAN BE COMBINED TO SAVE ON SHIPPING ITEM WILL BE SENT SAME OR NEXT DAY THANK YOU FOR VIEWING
|
|
|
USED KENNAMETAL-ERICKSON TG 50 COLLET CHUCK S/SHANK 1.00" SHANK (SS100TG050719)
LISTING IS FOR A USED KENNAMETAL-ERICKSON TG50 COLLET CHUCK SHANK- 1.00" OAL- 7.00' P/N- SS100TG050719(2-05-037-050) USES TG50 COLLETS(NOT INCLUDED) CONDITION- GOOD USED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, ... moreVISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTIN
|
|
|
NEW! GS DA180 COLLET CHUCK EXTENSION W/ 1-1/4" SHANK
aims NEW! GS DA180 COLLET CHUCK EXTENSION W/ 1-1/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a NEW! DA180 Collet Chuck Extension. Specifications: Shank: 1-1/4" Overall Length: 4-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NEW! GS DA180 COLLET CHUCK EXTENSION W/ 1-1/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
GANG LATHE BAR PULLER 1.0 INCH SHANK
MADE FROM ALUMINUM 1.0 INCH SHANK.T NUT AND SCREW FOR 7/16 SLOT CAN PULL.060 TO 1.125 INCH
|
|
|
2 KENNAMETAL SS100TCL769 TENSION/COMPRESSION TAP CHUCKS,1" SHANK
Inventory Number: 11130950034 Manufacturer: Description: 2 KENNAMETAL SS100TCL769 TENSION/COMPRESSION TAP CHUCKS.1" SHANK Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 2, 7-5/8" OVERALL LENGTH BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. ... moreWe do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds
|
|
|
USED SANDVIK BALAS COLLET CHUCK HOLDER C6 S10-4-C6 1.25" SHANK 1-1/4 C6
LISTING IS FOR A USED BALAS COLLET CHUCK BRAND: SANDVIK PART: S10-4-C6 SHANK: 1-1/4' OAL: 5-3/4' FOR USE WITH C6 BALAS COLLETS(NOT INCLUDED) CONDITION- VERY GOOD USED Normal 0 Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL ... moreAS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER
|
|
|
ERICKSON SS150TG100918 STRAIGHT SHANK SINGLE ANGLE COLLET CHUCK TG100 1.5" SHANK
A really nice ERICKSON Tool SS150TG100918 straight shank single angle collet chuck; for TG100 collets; 1.5" dia shank is 6" long. Tool is 9.18" long overall. Really excellent, close-to-new condition! With 1/2" collet and center drill. There is a second one available, it will come with a 13/16" collet and spotting drill. $5.95 gets it shipped in a priority mail flat rate envelope, though I would actually recommend a medium box at $12.35. We have more nice tooling in our other auctions, questions welcomed, thanks for looking.
|
|
|
RICHMILL TG150 COLLET CHUCK CAT 50 SHANK W/ 1-1/4" TG150 COLLET
Richmill TG 150 Collet Chuck w/ CAT 50 Holder Includes Techleader 1-1/4" TG 150 Collet CAT 50 Holder Length 5-3/8" Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay ... moreauction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Royal Products 43145 Grippex 20L 1-1/4" Shank Coolant Actuated Cnc Bar Puller
I have for sale the following in little used condition. Works perfectly I just don't have the need for it anymore. Royal Products 43145 Grippex 20L Coolant-Actuated Bar Puller With 1-1/4" Diameter Shank About this item The patented Grippex 20L CNC bar puller is actuated by a CNC lathe's coolant system. As coolant is fed through the unit. It pushes a piston forward which causes the fingers to close around the bar stock. When the coolant is turned off, the fingers automatically spring open. Fingers will close down until they contact the bar stock so no presetting is necessary. This feature allows the Grippex to make multiple pulls on the same work piece, even after the OD has been turned. Thick-walled heavy-duty construction helps to protect unit and allows it to be used at coolant pressures of up to 280 psi. Very high gripping ... moreforce and smooth operation is achieved through a patented finger mechanism that pivots on two roller bearings. Three-finger design is superior for gripping both round and hex stock. Unit only requires coolant(or air) pressure of 15 PSI for operation. Can also be used to pull finished parts from sub-spindles, eliminating the need for a parts ejector. I will post internationally Posted with Posted with
|
|
|
Sandvik 2" Shank BALAS S16 - 6 - 38 - 1 COLLET CHUCK HOLDER w/ 13 - C8 Collets
Sandvik 2" Shank BALAS S16- 6- 38- 1 COLLET CHUCK HOLDER Comes with Lot of 13- C8 Collets to fit as shown very nice like new condition as shown 2" Straight Shank Collet sizes.875. 2 x.813" 2 x.750" 4 x.438. 2 x.469" 29/64" 28/64" Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. All items are sent same day if bought and payed for before 12.00 noon Monday- Friday. Before 10Am Sat. If not it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store and Facebook Page for more great items and friendly. Reliable customer service. And Great deals. Thank You For Viewing
|
|
|
USED KENNAMETAL DA300 1"-SHANK COLLET CHUCK EXTENSION DA-300 SS100DA301544
LISTING IS FOR USED DOUBLE ANGLE COLLET CHUCK EXTENSION BRAND: KENNAMETAL PART# SS100DA301544 STYLE: DA300 SHANK: 1.00" OAL: 5.375" COLLETS ARE NOT INCLUDED CONDITION: VERY GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL ... moreAS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTIN
|
|
|
USED ERICKSON DA100 COLLET CHUCK EXTENSION 1.00"-Shank x DA-100 x 7.25" OAL
LISTING IS FOR A USED DA100 STRAIGHT SHANK COLLET CHUCK EXTENSION BRAND: ERICKSON TOOL SHANK: 1.00" OAL: 7.25" FOR USE WITH DA-100 COLLETS(NOT INCLUDED) CONDITION: WELL USED SOME NICKS AND DINGS ON SHANK Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION ... moreEND. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTI
|
|
|
USED TG50 SINGLE ANGLE STRAIGHT SHANK COLLET CHUCK TG-50 x 1.00" Shank
LISTING IS FOR A USED TG50 COLLET CHUCK BRAND: STYLE: TG50 SHANK: 1.00" OAL: 4.250" WAS SHORTENED CONDITION: GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD ... morePAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.535.8331
|
|
|
DA 180 COLLET CHUCK EXTENSION 1-1/4" SHANK 7" OAL USA
DA 180 COLLET CHUCK EXTENSION 1-1/4" SHANK 7" OAL USA 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1449584a459-0x10e-
|
|
|
3 ER20 COLLET HOLDERS W/ COLLETS W/ 1" SHANK
3 ER20 COLLET HOLDERS W/ COLLETS W/ 1" SHANK Size: ER 20 Shank: 1" OAL: 2 1/2- 4" Collet: 9-8. 0- 1, 7/16, 3/8& 1/2* Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
|
|
|
Erickson Tool (Kennametal) 1" dia. Straight Shank Tension/Compression Tap Chuck
For u se with"L" series collets. none included.
|
|
|
Royal Products-4 inch Heavy Duty Bar Puller with a 1 inch shank,Steel
Holder not included. Only black royal Heavy Duty Bar Puller. Great condition, used with a little bit of oil, and grease on it. It was used for a previous Cincinnati Milacron Machine that we no longer have in use for in the shop.
|
|
|
TSD UNIVERSAL AUTOMOTIVE SHANK COLLET CHUCK 90542 W/COLLET 1" DIA (LOC776)
I ship 6 days a week. I offer money back guarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interested. INTERNATIONAL SHIPPING PRICE VARIES. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14504194f27-0x111-
|
|
|
USED DA 300 COLLET CHUCK & 1/8" COLLET 5" OAL X 1/2" SHANK 532
YOU ARE BIDDING ON ONE USED DA 300 COLLET CHUCK& 1/8" COLLET 5" OAL X 1/2" SHANK DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Collet Chuck for Erickson DA 180 Collets 1-1/2" Shank
This is a Collet Holder for Ericksen DA 180 Collets. The shank is 1-1/2" dia and 3-3/4" long. Two items to note: the shank is pretty well dinged up& the collect in the photos does NOT come with the chuck. If this item does not perform to your specs will accept a return. Shipping:$15.00 LOC:G3 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14505e43fde-0x105-
|
|
|
3 BILZ WFLK 115-0 A 308 QUICK CHANGE TAP CHUCK, SIZE 1, SHANK 20mm
Inventory Number: 12091440401 Manufacturer: Description: 3 BILZ WFLK 115-0 A 308 QUICK CHANGE TAP CHUCK. SIZE 1, SHANK 20mm Capacity: Model Number: Serial Number: Additional Information: NEW. OLD STOCK, QUANTITY 3 BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer ... moreBuy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs
|
|
|
HEAVY DUTY ER25 COLLET CHUCK w/ 1" SHANK
This is a used ER25 Collet Chuck in good condition. Specifications: Collet Type: ER25. Shank Diameters: 1" Overall Length: 8" Comes exactly as shown in pictures.
|
|
|
LOT "FF" USED DA180 1-1/2"-Shank COLLET CHUCK EXTENSION with 9 DA-180 COLLETS
LISTING IS FOR A USED DA180 COLLET CHUCK WITH 9 COLLETS COLLET CHUCK BRAND: SHANK: 1.50" OAL: 7.50" COLLET CHUCK CONDITION: WELL USED LOTS OF SCORING AND SURFACE RUST PITTING ON SHANK 10 COLLETS ARE INCLUDED COLLET SIZES: 3/4" NEW KENNAMETAL 7/32" USED USA 11/32" USED USA 21/64" USED USA 9/32" USED USA 21/32" USED USA 23/32" USED USA 7/16" USED USA 11/16" USED USA ALL USED COLLETS ARE IN GOOD TO VERY GOOD USED CONDITION MAY HAVE SOME MINOR SPOTS OF SURFACE RUST Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER ... moreIN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGR
|
|
|
U.S.A.! CRAFTSMAN ER32 COLLET CHUCK EXTENSION w/ 1-1/4" SHANK
Made in the U.S.A. by Craftsman Ind. This is a ER32 Collet Chuck Extension in good condition. Specifications: Spindle Taper: ER32. Shank Diameter: 1-1/4" Overall Length: 3-3/4" Comes exactly as shown in pictures.
|
|
|
NIKKEN SK10 COLLET CHUCK EXTENSION w/ 1-1/4" SHANK
Made in Japan by Nikken. This is a SK10 Collet Chuck Extension in good condition. Specifications: Spindle Taper: SK10. Shank Diameter: 1-1/4" Overall Length: 8-1/8" Comes exactly as shown in pictures.
|
|
|
INGERSOLL ER16 COLLET CHUCK EXTENSION w/ 1/2" SHANK
Made by Ingersoll. This is a ER16 Collet Chuck Extension in good condition. Specifications: Spindle Taper: ER16. Shank Diameter: 1/2" Overall Length: 5-1/4" Comes exactly as shown in pictures.
|
|
|
Lathe CNC Dunham Bar Puller Shank fits 1-1/2 Tool Holder
Lathe CNC Dunham Bar Puller Shank This gripper retails for $93.33 at MSC. The lightweight and self-activating bar puller has no moving parts. Mounts in 60 seconds with gripper change in about 30 seconds, and does not interfere with other tools or cause turret imbalance. When a bar puller is used, the lathe turret no longer acts as a stock stop, reducing turret degradation and eliminating expensive, space-consuming, high maintenance bar feeds. How It Works 1. Mount shank in turret; screw on adapter(if required) and gripper. 2. Insert bar through back of spindle and clamp with collet or chuck. 3. Face off minimum 1/4" projection using parting off command in CNC program. 4. Index turret to bar pull and traverse turret toward spindle for programmed distance. Sliding gripper over stock. 5. Release clamping pressure on bar. 6. Retract turret ... moreprogrammed distance. 7. Reclamp Bar. 8. Retract turret sufficiently to clear gripper from bar. 9. Begin programmed machining cycle. 10. Repeat until all of bar is used. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-145d9a18da5-0x116-
|
|
|
Seibert Tapping Chuck 6005-106 1 1/16” OD Threaded Shank x .317” ID
Seibert Tapping Chuck 6005-106 1 1/16” OD Threaded Shank x.317” ID ALL ITEMS ARE SOLD AS IS. WHERE IS For Questions Call John 314-398-7414 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES Stock#6378-C
|
|
|
UNIVERSAL DOUBLE TAPER COLLETS AND 2 COLLET CHUCKS (1” AND 3/4" SHANK)
UNIVERSAL DOUBLE TAPER COLLETS AND 2 COLLET CHUCKS(1” AND 3/4" SHANK) CONDITION: Used/ See Photos/ Normal Wear and Tear Item is in Good Working Condition Will Combine Shipping– Request Invoice All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a shipping difference that money will be immediately refund. Please e-mail with questions
|
|
|
Hy-Pro Hy1B-A17 Ext Tapping Head 1 1/16” OD Threaded Shank X ¾” ID
Hy-Pro Hy1B-A17 Ext Tapping Head 1 1/16” OD Threaded Shank X ¾” ID ALL ITEMS ARE SOLD AS IS. WHERE IS For Questions Call John 314-398-7414 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES Stock#6384-C
|
|
|
Seibert Tapping Chuck S998508-005 1 1/16” dia. Threaded Shank x 7/16” ID
Seibert Tapping Chuck S998508-005 1 1/16” dia. Threaded Shank x 7/16” ID ALL ITEMS ARE SOLD AS IS. WHERE IS For Questions Call John 314-398-7414 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES Stock#6383-C.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-146b164d8e1-0x119-
|
|
|
Seibert 06026137 Tapping Chuck 1 3/8” OD Threaded Shank x 1.220 ID
Seibert 06026137 Tapping Chuck 1 3/8” OD Threaded Shank x 1.220 ID ALL ITEMS ARE SOLD AS IS. WHERE IS For Questions Call John 314-398-7414 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES Stock#6381-C
|
|
|
Seibert 8421305-009 Tapping Chuck 1 1/16” OD Threaded Shank x 1.220 ID
Seibert 8421305-009 Tapping Chuck 1 1/16” OD Threaded Shank x 1.220 ID ALL ITEMS ARE SOLD AS IS. WHERE IS For Questions Call John 314-398-7414 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES Stock#6380-C
|
|
|
Seibert 06005106 Tapping Chuck 1 1/16” OD Threaded Shank x 3/8” ID
Seibert 06005106 Tapping Chuck 1 1/16” OD Threaded Shank x 3/8” ID ALL ITEMS ARE SOLD AS IS. WHERE IS For Questions Call John 314-398-7414 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES Stock#6379-C
|
|
|
USED BALAS C4 FLEXI-GRIP COLLET CHUCK with 3/4"-Shank (S6-3"-C4-1)
LISTING IS FOR A USED BALAS C4 COLLET CHUCK BRAND- BALAS PART# S6-3"C4-1 SHANK DIAMETER: 750" OAL: 4.50" USES C4 SERIES BALAS COLLETS(NOT INCLUDED) CONDITION- GOOD USED NUT COMES WITHOUT WASHER. AND WITHOUT ROLLER BEARING Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 ... moreBUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF
|
|
|
COMMAND ER11 COLLET CHUCK EXTENSION w/ 1/2" SHANK & 5 COLLETS
Made by Command. This is an ER11 Collet Chuck Extension w/ 5 Collets in good condition. Specifications: Spindle Taper: ER11. Collet Sizes Included: 1-5mm. 2) 1.5-2mm, 2-2.5mm, 3-3.5mm. Shank Diameter: 1/2" Overall Length: 6-3/8" Comes exactly as shown in pictures.
|
|
|
ER16 COLLET CHUCK EXTENSION w/ 3/4" SHANK & 1 COLLET
This is a ER20 Collet Chuck Extension w/ 1 Collets in good condition. Specifications: Spindle Taper: ER20. Collet Sizes Included: 5/32. Shank Diameter: 3/4" Overall Length: 6-3/4" Comes exactly as shown in pictures.
|
|