Starrett No 278 Machinist Matched Starrett 567 V-Block Clamps Machinist Setup Blocks Parallel Block Clamps Matched Blocks Grinding Blocks Hardened Machinist Angle Blocks Starrett 568 V-Block Hardened Magnetic Transfer Blocks Hold Down Block Blocks Fixtures Out The Wazoo Precision Machinist Blocks Toolmaker Machinist Inspection Milling Block Transfer Blocks Transfer V Blocks Wazoo See All Read Inspection Grind Blocks Work Hold Hold Down Blocks Magnetic Parallel Machinist Blocks Parallel Block And Clamps Block W Clamps Block With Clamps V-Block With Clamps Matched V-Block Machinist Step Blocks Magnetic Transfer Vee Block 278 V Blocks Magnetic Transfer V-Block Step Blocks Right Angle Block Precision Parallel V-Block And Clamps V-Block Clamps V-Block W Clamps Setup Block Hardened Ground Inspection Grinding Parallel Blocks Machinist Setup Parallel Bars Steel V Blocks Taft Peirce Inspection Grinder Mill Ground Matched Ground Angle 278 V-Block Parallel Hold Adjustable Parallel Blocks Machinist Toolmaker 568 V-Block Angle Blocks Starrett Blocks Machinist Set-Up Steel Transfer Block 123 Blocks Magnetic V Blocks Hardened And Ground Inspection Grind Mill Vintage Toolmaker Machinist Inspection Hardened Tools Magnetic Parallel Blocks Drill Blocks Toolmaker V Blocks Machinist Sets Starrett Adjustable Parallel Heirloom Level Pair Of Magnetic Toolmaker Mill Clamps Machinist Tools Fixtures Machinist Tapped Angle Blocks Bar Multi Tapped Starrett V Blocks Steel Parallel Precision Steel V-Block Small Magnetic V Block Starrett Clamps Hold-Downs Usa Machinist Toolmaker Other Usa Cast Ground Thin Parallel Magnetic V Block Precision V Blocks Pair Of Precision Precision Ground Bench Block 568 V Blocks Precision 123 Blocks Sharpe V Block Goody Bag Usa Machinist Toolmaker Usa Machinist Toolmaker Other Usa Pair Of Machinist Machinist Gunsmith Lathe Milling Blocks Machinist Tools Vintage Hold-Downs Usa Machinist Toolmaker Grind Mill Grinding Milling Blocks Model Machinist Set-Up Blocks Parallel Blocks 4 Precision V-Block Gage Blocks Step Block Sine Blocks Machinist Sets Up Blocks Blocks Usa Machinist Hold 1 2 3 Block Starrett V Block Precise Machinist Soft Jaws Blocks And Clamps Blocks W Clamps Blocks With Clamps Angle Block Heirloom Quality Heavy Duty Machinist Machinist Parallel Sine Bar Blocks Sets Of 2 Usa Matched Parallel Set Blocks For Sherline Steel Angle Starrett 129 1 2 3 Blocks Magnetic Transfer Parallel George Scherr Precision Machinist Tools Grinder Milling Machinist Magnetic Angle Plates Parallel Bar Hold Down Clamps Parallel Set Toolmaker Precision Angle Blocks Lathe Mill Nice Gunsmith Toolmaker Machinist Lathe Milling Lot Of Machinist Taft Pierce Cast Ground Angle Milling Tools Block Machinist Tooling Grind Cube Complex Multi Blocks Pair Milling Hold Precision Grinding Lathe Drill Press Metal Lathe Milling 2 Fresh Ground Machinist 9 Fishtail V Block Clamps Free Ship Parallel Sets Brown Sharp V-Block Machinist Tools Lathe Milling Girder Bar Gauge Blocks Usa American Toolmaker Machinist 11 Machinist Jeweler's Right Angle Blocks Precise Ground Lathe Mill 2 Hardened Steel Brown Sharp V Blocks Magnetic Chuck Square Blocks Machinist Tools Maker Usa Heirloom Clamps Usa Inspection Tools Machinist Jig Boring Steel Pins Toolmakers Jig Boring Tools Maker 123 Block Girder Bars Bench Blocks Mini V-Block Tapped Hole Brown Sharp Machinist Moore Tools Jig Fixtures Matched Sets
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
MACHINIST MADE FISH TAIL V-BLOCK , 3-3/8"L x 2-3/8"W x 2-5/8"H , NOM.
$
89.99
Buy It Now
$10.55 Shipping
Condition: Used
Location: Berlin, United States
HAS OWNERS MARKS
1-5/8" x 1-1/4" x 1-1/4" Precision V Blocks and Clamp Set Steel Gauge Machinist
$
34.85
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
BRAND NEW Steel V Blocks With Clamp Set 1-5/8 x 1-1/4 x 1-1/4 90 Degrees Angle V-Blocks Made Of Tool Steel, Hardened And Precision Ground Chrome Steel ... moreSquare, Parallel And Concentric Maximum Diameter Of Bar: 1'' Completed With Wooden Box Unit Weight: 2 Lbs Quantity: 1 Brand turitrade MPN TR33140 Block Type V-Block Shape V Block Degree 90 Block Material Hardened Steel UPC Does not apply.
Machinist V-Blocks 2-3/8" × 2-3/4" × 2" Clamp Set Hardened Steel New
$
60.58
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: Length: 2-3/8" Width: 2-3/4 Height: 2" Capacity: 2" round, 1-7/16" square Features: Stepped grove construction permits low or high clamping. ... moreHardened steel. All squares precision ground parallel and square. Sold in matched pairs. Package Includes: 1 Pcs Multi-Use V-Block and Clamp Hardened Steel 2-3/8" × 2-3/4" × 2" Set UPC Does not apply Brand menbager MPN 897408 Block Type V-Block Shape V Block Block Material Steel Warranty 1 Year.
4 Pair 5/32" x 3" Precision Parallel Set 1/2" - 7/8" Machinist Toolmaker 8 PC
$
21.77
Buy It Now
Free Shipping
Condition: New
Location: Monrovia, United States
Light Item.
Machinist Thin Parallel Bars 16-Piece Tool Set 1/2" x 6" Blocks-8 Pairs
$
77.77
Buy It Now
Free Shipping
Condition: New
Location: Monrovia, United States
+/-. 0002" in Parallelism. Machinist Thin Parallel Bars 16-Piece Tool Set 1/2" x 6" Straightedge Bar Blocks-8 Pairs. Constructed from solid steel that ... moreis stress relieved against distortion as well as precision ground and hardened for ultimate strength and longevity.
2-3/8'' x 2-3/8'' x 2'' V Block & Clamp Set Gauge Gage Machinist Tool Multi-use
$
43.99
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
2-3/8' x 2-3/8' x 2' V Block Clamp Set Descriptions: Brand New V block clamp set Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min. 13/64" ... moreCapacity Max: 1-3/16" V-Blocks are 90 All sides ground square and parallel to each other"V" are ground central. Parallel and square to the ends Made of hardened and ground chrome steel Wooden storage case INCLUDED Wooden storage case dimension: 3-1/2'L x 6-1/4'W x 3-1/2' Shipping Weight: 5 lbs Quantity: 1 Free shipping HAWAII(HI) ALASKA(AK) and PO Box. We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* sales tax will be added at check out. Shipping and Handling to States: FREE SHIPPING(Excludes: APO. GU, PR, VI) HAWAII(HI) ALASKA(AK) and PO Box OKAY! Additional shipping charge applies to APO. GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $50.00(1st unit) + $25.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received within 7 days or a Non Paying Bidder Alert will be filed. Return Policy: In-Order for us to Provide FREE SHIPPING. All Returns Are Subject to a 15% Restocking. Buye
MACHINISTS' BENCH BLOCK (3600-0042)
$
29.86
Buy It Now
$10.40 Shipping
Condition: New
Location: Chino, United States
Machinist's Bench Block. The knurled side provides a good gripping surface. AIR, POWER & HAND TOOLS. A handy tool for holding work when driving pins, ... moredrilling, etc. Why should you buy from us?. Made from hardened and ground steel.
Machinist's Thin Parallel Bar Set - 8 Pair 1/2" x 6"
$
77.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
SquareTrade © AP6.0 Serving eBay Community since 2003. Check out our perfect feedback and buy with confidence! Machinist's Thin Parallel Bar ... moreSet- 10 Pair 1/8" X 6" Features Precision machinist's steel parallel bar set in 1/8"thickness x 6" length 10 pair of bars in heights: 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" Custom-fit ABS storage case keeps set clean and protected 0 None Description Precision machinist's steel parallel bar set in 1/8"thickness x 6" length Terms and Conditions Shipping and Handling Free shipping to 48 continental US States Please contact us before you buy if you want to ship to PO Box. Alaska, Hawaii, US Protectorates, and Military address(APO/FPO) We do not ship internationally Return Policy All returns accepted To qualify for the return. Buyer should contact us within 14 days after receiving the item Refund given as Money Back Return shipping will be paid by the buyer Full money back if the item is defective or not functional. If return is desired for other reasons. 10% restocking fee will be deducted from the refund. Please contact and get return authorization prior to returning any items. Items need to be returned in the original package in order to get full refund Other Information To get 100% guarantee on delivery schedule. Item availability, item details and other information, please don't hesitate to contact us. We will respond within 1 business day(usually within 1 hour) We only ship to the address that you enter when you place the order. Please do not email us a different address after you place the order because the item might have been shipped when we get your message. Thanks On Nov-17-12 at 09:53:52 PST. Seller added the following information: |SKU|: A|R48F52RKZY On Nov-30-12 at 17:07:26 PST. Seller added the following information: Note to non-USA buyers: All of our electrical products(kitchen appliances. Home video/audio systems and etc. are US standard and ope
1Set 2-3/8 x 2-3/8 x 2 Inch V Block & Clamp Multi-use Gauge Gage Machinist Tool
$
41.76
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification： Brand New V Block Clamp Set Multi-use Gauge Gage Machinist Tool Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min.: 13/64" Capacity Max: 1-3/16" ... moreV-Blocks Are 90 Accuracy: 0.0002" All Sides Ground Square And Parallel To Each Other "V" Are Ground Central,Parallel And Square To The Ends Made Of Hardened And Ground Chrome Steel Wooden Storage Case Included Weight: 5 Lbs Overall Wooden Storage Case Small Freight Item Package Including： High Quanlity 2-3/8 X 2-3/8 X 2" Ultra Precision V-block & Clamp Set .
Vintage Machinist Right Angle Set Up Plate Block 3 5/8”x3 7/8”x4 3/4” Tool
$
22.00
Buy It Now
$34.85 Shipping
Condition: Used
Location: Hammonton, United States
Vintage Machinist Right Angle Set Up Plate Block 3 5/8”x3 7/8”x4 3/4” Tool. I got this in a lot at an estate sale. This item is a solid heavy Machinist ... moretool. Item needs to be cleaned up a bit. There is a name that looks like cow gill ? and a number 5 formed in this item. ITEM SOLD AS SHOWN AS FOUND PLEASE ASK QUESTIONS AND ASK FOR MORE PHOTOS IF NEEDED THANK YOU.
BUSCH PRECISION Universal Right Angle Iron 16x9x8" Machinist Plate #2732 -USA
$
299.00
Buy It Now
$92.98 Shipping
Condition: Used
Location: Chicago, United States
BUSCH PRECISION Universal Right Angle Iron 16x9x8" Machinist Plate #2732 -USA Nice Condition, but has been drilled,pined, etc SEE ALL PICTURES. are ideal ... morefor square and parallel references. Made of specially treated, close-grained quality castings, with all outside surfaces precision finished square and parallel, these angles can be used in any position.
Steel Parallel Set .0002" Hardened Precision Machinist Tools
$
38.99
Buy It Now
Free Shipping
Condition: New
Location: Azusa, United States
[HIGH-QUALITY MATERIALS]: Made from high-quality tool steel with a hardness of 50 HRc, this parallel set is durable and long-lasting. [EASY STORAGE AND ... moreTRANSPORT]: Complete with durable plastic case for easy storage and transport.
20pc most TECO machinist set up tooling 5/8-11 hold downs & 5 smaller (top left)
$
149.99
Buy It Now
Free Shipping
Condition: Used
Location: Winder, United States
TE-CO 20212 Clamping Kit,Super Machinist,51pc
$
563.19
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
TE-CO 20212. Clamping Kit,Super Machinist,51pc. PROTO J4245 Gen Purpose Puller Set,3/6/10 Ton. Grainger reserves the right to accept or reject any order. ... moreDiversion contrary to U.S. law is prohibited.
Machinist V-Blocks 2-3/8" x 2-3/4" x 2" Clamp Set Hardened Steel
$
57.66
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Product description Length: 2-3/8" Width: 2-3/4 Height: 2" Capacity: 2" round, 1-7/16" square Product features Stepped grove construction permits low ... moreor high clamping Hardened steel All squares precision ground parallel and square Sold in matched pairs UPC Does not apply Brand autoooparts MPN APO188928 Block Type V-Block Shape V Block Block Material Steel.
Machinist Precision Ground Comparator Stand - 8 1/2"x5 1/4"x1 5/8" - 10" Post
$
39.95
Buy It Now
$61.10 Shipping
Condition: Used
Location: Wilmette, United States
This is a solid and clean used machinist work stand. The item is in good condition. No major scratches or gouges in the steel. A nice work plate surface.
Lot of 2ea. Machinist Transfer Blocks 5-5/8" x 1-7/8" x 1" + 0.2" tips
$
46.55
Buy It Now
Free Shipping
Condition: Used
Location: South Gate, United States
Lot of 2ea.
V-BLOCK W/CLAMP GROUND MACHINIST USA AMERICAN TOOLMAKER PRECISE GRIND WIRE CUT
$
74.95
Buy It Now
$10.00 Shipping
Condition: Used
Location: Sheffield, United States
USA TOOLMAKER MADE V-BLOCK AND CLAMP. USED V BLOCK MADE BY A US A TOOLMAKER. CLAMP FITS V BLOCK VERY WELL AS SHOWN. VERY HANDY DESIGNED VBLOCK! ONE VEE ... moreIN V BLOCK THAT IS ABOUT 9/16" WIDE AND IS PRECISION GROUND AS SHOWN.
20 pc THIN PARALLEL 1/8" x 6" JIG BLOCK BAR TOOL SET MACHINIST MACHINE SHOP
$
46.95
Buy It Now
Free Shipping
Condition: New
Location: Granada Hills, United States
VISIT OUR STORE YOU MAY ALSO BE INTERESTED IN: DIAL INDICATOR + FLEX ARM CLAMP PLIER BASE 10 pc DIAMOND RIFFLER FILE SET 40" Professional Super High ... morePrecision Electronic Caliper 24" Professional Super High Precision Electronic Caliper 6" MACHINIST PRECISION STEEL HARDENED SQUARE SET 4" MACHINIST PRECISION STEEL HARDENED SQUARE SET 0-6" x 2-1/2" WIDE DEPTH MICROMETER Machinist Gauge Tool 3 piece Power Extension Socket Bits for Drills 2 pc BEARING SEPARATOR SET Mini HIGH VOLUME LOW PRESSURE(HVLP) SPRAY GUN- MACHINIST 10 PAIRS THIN PARALLEL SET BRAND NEW* IN STOCK* Available For Immediate Shipping- Professional Precision Tool Made of high grade alloy steel. Hardened and ground. 2 holes in each parallel. All parallels 1/8" thick x 6" long. 1 pair each of following widths: 1/2" to 1 5/8" by 1/8" Hardness: 54-58 HRC. +/0002 Parallelism in height. Features: +/ 0002 Parallelism in height. 10 1/8" Thin matched pairs in set High quality precision ground alloy Hardness: 54-58 HRC Measurements: 6" long x 1/8" thick Two holes in each bar Increments in 1/8" from 1/2" to 1-5/8" Set includes a pair of each height: 1/2. 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2 and 1-5/8 Molded storage case to keep bars organized is included Real People. Real Buyers. Real Products. Real Feedback. Recent feedback that we received on this product: Excellent. Item as descibed and fast shipping A+++++++ buckfever1901 310388219974 Excellent Product and fast shipping moraca 310379500206 Nice parallels. Thank you anytimeparts! skeeterdeeb 310378415668 Accurate description. Fast Shipment! researchgirl513 310379090277 great prices.Free shipping,TOP NOTCH SELLER bnrtree86 370578717488 Super Fast Shipping Great Product Pleased to do Business With AAA +++ gnwolf3prh 310356825910 Precision Quality. Graet Price, Quick shipping pickle631 230495746525-NEW- 1/8" THICK PARALLEL SET- Smooth Transaction- Nice Quality- THANK YOU one-mold-maker 230646437381 Excellent Item. Tha
1-2-3 BLOCKS (GPY PARALLELS XLNT TOOLMAKER MACHINIST INSPECTION GRIND MILL QA
$
94.95
Buy It Now
$15.00 Shipping
Condition: Used
Location: Sheffield, United States
TOOLMAKER MADE 1"-2'-3" BLOCKS OWNED BY USA TOOLMAKER. MADE OF HARDENED AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS, MACHINIST AND TOOLMAKERS ... moreALIKE. BLOCKS ARE STAMPED ON THE END IN A RECESS BEFORE HEAT-TREAT AND GRINDING.
Machinist SET UP BLOCK RIGHT ANGLE approx 3-1/8" Square 4lbs 2oz
$
74.99
Buy It Now
$10.60 Shipping
Condition: Used
Location: Cape Neddick, United States
Vintage setup fixture block.
BLOCKS OR PARALLELS (4) US AMERICAN MACHINIST TOOLMAKER SURFACE GRIND MILL QTA
$
49.95
Buy It Now
$12.50 Shipping
Condition: Used
Location: Sheffield, United States
USED SET BY A US A TOOLMAKER. (4) 7/8"- (.865") X 1-7/32" - (1.209") X 2-15/16"- (2.925") TOOLING BLOCKS. USA MADE BLOCKS. PRECISION GROUND AS SHOWN.
MACHINISTS FLAT ANGLE BLOCKS , LOT OF 3
$
24.99
Buy It Now
$6.95 Shipping
Condition: Used
Location: Berlin, United States
1/8" AND 1/4" THICK.
VINTAGE V - Machinist Block 4 5/8" X 2" X 1"
$
26.99
Buy It Now
$9.99 Shipping
Condition: Used
Location: Wylie, United States
Vtg. Machinist V Block 4" x 2-5/8' x 2-1/2" Good Condition. Shop Made. Block weights 5 lbs 2 oz. Nice Old Tool. This block came from an ... moreold machinist tool chest
Precision Pair 2"x4"x6" Blocks 5/8"-11 Machinist Tools Block Milling Grinding
$
85.00
Buy It Now
Free Shipping
Condition: Used
Location: Sturgis, United States
Very nice used condition as shown with free shipping included. Clean for the most part with some scratches but overall nice older set as shown in pictures. ... moreOwners marks. Approximately 18 lbs
TRIANGLES 12* 34*45*30* GAGES PARALLELS MACHINIST TOOLMAKER GRIND MILL INSPECT
$
29.95
Buy It Now
$8.00 Shipping
Condition: Used
Location: Sheffield, United States
THIN GAGES OR PARALLELS (4). 30 , 34 ,12 AND 45 SPECIALTY DESIGN TRIANGLES IN EXCELLENT USED CONDITION AS SHOWN. THESE TRIANGLES ARE THIN 5/64" AND ABOUT ... more1-7/8" LONG AND 1-1/2" TALL WITH A KEYWAY IN BOTTOM,1/4" WIDE X 7/32" DEEP.
STARRETT 384B STEEL PARALLELS 1/8 X 1 3/16 MACHINIST TOOLS 6" LONG
$
75.00
Buy It Now
$6.80 Shipping
Condition: Used
Location: Niles, United States
LISTED IS A PAIR OF STARRETT 1/8 X 1 3/16 384B PARALLELS. THIS SIZE IS NO LONGER BEING SOLD BY STARRETT. I TOOK PICTURES OF ALL 6 SIDES FOR YOUR VIEWING ... morePLEASURE. THESE ARE 6" LONG. ORIGINAL PACKAGING IS NOT INCLUDED. BE SURE TO CHECK OUT MY OTHER ITEMS.
Taft Peirce Box Parrallel 12"x8"x5" Machinist Set Up Block Angle Iron No. 9162
$
342.95
Buy It Now
$122.20 Shipping
Condition: Used
Location: Medina, United States
Id; 1ea T&P 9162 Shelf 2/6.
Multi-use Gauge Gage Machinist Tool 2-3/8 x 2-3/8 x 2 Inch V Block & Clamp
$
51.03
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Brand New V Block Clamp Set Multi-use Gauge Gage Machinist Tool Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min.: 13/64" Capacity Max: 1-3/16" V-Blocks Are ... more90 Accuracy: 0.0002" All Sides Ground Square And Parallel To Each Other "V" Are Ground Central,Parallel And Square To The Ends Made Of Hardened And Ground Chrome Steel Wooden Storage Case Included Weight: 5 Lbs Overall Wooden Storage Case Quantity: 1 Small Freight Item Brand ALL-CARB MPN Does Not Apply Warranty 1 year Instrument Type Gage Block Block Material Hardened Ground Steel Block Type V-Block.
ALL-CARB Machinist V-Blocks 2-3/8" × 2-3/4" × 2" Clamp Set Hardened Steel
$
56.91
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. ... moreIf you are not sure if this model is right for you, please feel free to contact us. Features: This product offers the best after-sales service. We are committed to providing you with durable and high quality products. Thank you for choosing our products! Length: 2-3/8" Width: 2-3/4 Height: 2" Capacity: 2" round, 1-7/16" square.
MHC 8 PC 1-2-3 BLOCKS & SCREWS CLAMPING SET WITH CASE MACHINIST BLOCKS 123
$
55.69
Buy It Now
$6.49 Shipping
Condition: Used
Location: Sacramento, United States
8 PC 1-2-3 BLOCKS & SCREWS CLAMPING SET WITH CASE. Condition is "Used". As a Preowned item it may show signs of wear. See pics for condition. PLEASE ZOOM ... moreIN ON PICS TO SEE DETAIL OF THE ITEM. PLEASE DO YOUR OWN RESEARCH TO ENSURE FITMENT AS WE DO NOT ACCEPT RETURNS. WE ARE MORE THAN HAPPY TO TAKE ADDITIONAL PHOTOS OR MEASUREMENTS TO HELP. Please contact us for questions or additional photos PRIOR to purchasing. Shipping price is for continental US only. WE ALSO OFFER INTERNATIONAL SHIPPING THROUGH EBAY’S GLOBAL SHIPPING PROGRAM. WILL SHIP QUICKLY AND SAFELY!
2-3/8'' x 2-3/8'' x 2'' V Block & Clamp Set Gauge Gage Machinist Tool Multi-use
$
51.20
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
2-3/8' x 2-3/8' x 2' V Block Clamp Set Descriptions: Brand New V block clamp set Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min. 13/64" ... moreCapacity Max: 1-3/16" V-Blocks are 90 All sides ground square and parallel to each other"V" are ground central. Parallel and square to the ends Made of hardened and ground chrome steel Wooden storage case INCLUDED Wooden storage case dimension: 3-1/2'L x 6-1/4'W x 3-1/2' Shipping Weight: 5 lbs Quantity: 1 Free shipping HAWAII(HI) ALASKA(AK) and PO Box. We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* sales tax will be added at check out. Shipping and Handling to States: FREE SHIPPING(Excludes: APO. GU, PR, VI) HAWAII(HI) ALASKA(AK) and PO Box OKAY! Additional shipping charge applies to APO. GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $50.00(1st unit) + $25.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received within 7 days or a Non Paying Bidder Alert will be filed. Return Policy: In-Order for us to Provide FREE SHIPPING. All Returns Are Subject to a 15% Restocking. Buye
6PC ADJUSTABLE PARALLEL SET 3/8" - 2-1/4" For Layout, Inspection
$
33.69
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature： 6 Pcs Adjustable Parallel Sets Minimum Measuring Range (Inch): 3/8'' Maximum Measuring Range: 2-1/4'' Length Range From : 1-3/4" to 5" Closed ... moreHeight Range: 3/8" to 1/2", 1/2" to 11/16", 11/16" to 15/16", 15/16" to 1-5/16", 1-5/16" to 1-3/4", 1-3/4" to 2-1/4" Quickly Adjustable And Locked With Screws For Micrometer Applications:For layout, inspection, shop work, set-up, etc. Package List: 6Pcs Adjustable Parallel Set 3/8" - 2-1/4" High Precision US .
BLOCKS OR PARALLELS (5) US AMERICAN MACHINIST TOOLMAKER SURFACE GRIND MILL QTA
$
59.95
Buy It Now
$15.50 Shipping
Condition: Used
Location: Sheffield, United States
USED SET BY A US A TOOLMAKER. (2) 19/32"- (.590") X 1-15/32" - (1.465") X 2-1/8"- (2.117") TOOLING BLOCKS. SINGLE STEP GROUND INTO EACH BLOCK AS SHOWN. ... more(2) 41/64"- (.640") X 1-53/64" - (1.833") X 2-1/8"- (2.230") TOOLING BLOCKS.
GRIND CUBE 2.6 X 2.6 X 2.6 MACHINIST TOOLMAKER HARDENED TAPPED 63 TIMES CLEAN US
$
225.00
Buy It Now
$22.00 Shipping
Condition: Seller refurbished
Location: Sheffield, United States
TOOLMAKER OWNED AND PRECISION GROUND GRINDING CUBE. MACHINIST OR TOOLMAKER TYPICALLY USED FOR GRINDING,LIGHT MILL WORK OR EVEN INSPECTION AS IT IS A PRECISION ... moreGROUND CUBE. (1) GRIND CUBE WITH (63) 8 X 32 TAPPED HOLES AS SHOWN.
1-5/8" x 1-1/4" x 1-1/4" Precision V Blocks & Clamp Set Steel Gauge Machinist
$
46.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Made Of Hardened Steel Machine And Ground. V Blocks Are 90 Degree. Square, Parallel And Concentric. Weight: 2 Lbs Estimate Only .
QU-CO Modular Fixturing Set 5" x 5" Plate 8" V Block TECO Machinist Clamp Set Up
$
548.98
Buy It Now
$103.60 Shipping
Condition: Used
Location: Hamburg, United States
Particularly the 5"x5"x1" Plate has areas of pitting to one of the machined surfaces that left behind a roughness. -QU-CO No. 81302- 5" x 5" x 1" Fixturing ... morePlate Threaded 1/2"-13 with milled Slot.
1-2-3 Blocks Matched Pair 23 Holes Precision Machinist Milling with Wooden Case
$
20.50
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
1-2-3 Blocks Matched Pair Hardened Steel 23 Holes Precision Machinist Milling Fitted in a Wooden Case. 23 holes includes (5) 3/8-16 threaded holes for ... moreclamping and (18) untapped holes. Date First Available ‏ : ‎ April 28, 2023.
2-3/8'' x 2-3/8'' x 2'' V Block & Clamp Set Multi-use Gauge Gage Machinist Tool
$
52.83
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
2-3/8' x 2-3/8' x 2' V Block Clamp Set Descriptions: Brand New V block clamp set Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min. 13/64" ... moreCapacity Max: 1-3/16" V-Blocks are 90 All sides ground square and parallel to each other"V" are ground central. Parallel and square to the ends Made of hardened and ground chrome steel Wooden storage case INCLUDED Wooden storage case dimension: 3-1/2'L x 6-1/4'W x 3-1/2' Shipping Weight: 5 lbs Quantity: 1 Free shipping HAWAII(HI) ALASKA(AK) and PO Box. We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* sales tax will be added at check out. Shipping and Handling to States: FREE SHIPPING(Excludes: APO. GU, PR, VI) HAWAII(HI) ALASKA(AK) and PO Box OKAY! Additional shipping charge applies to APO. GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $50.00(1st unit) + $25.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received within 7 days or a Non Paying Bidder Alert will be filed. Return Policy: In-Order for us to Provide FREE SHIPPING. All Returns Are Subject to a 15% Restocking. Buye
Multi-use 2-3/8 x 2-3/8 x 2 Inch V Block & Clamp Gauge Gage Machinist Tool
$
51.20
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Brand New V Block Clamp Set Multi-use Gauge Gage Machinist Tool Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min.: 13/64" Capacity Max: 1-3/16" V-Blocks Are ... more90 Accuracy: 0.0002" All Sides Ground Square And Parallel To Each Other "V" Are Ground Central,Parallel And Square To The Ends Made Of Hardened And Ground Chrome Steel Wooden Storage Case Included Weight: 5 Lbs Overall Wooden Storage Case Quantity: 1 Small Freight Item Brand ALL-CARB MPN Does Not Apply Warranty 1 year Instrument Type Gage Block Block Material Hardened Ground Steel Block Type V-Block.
1-5/8" × 1-1/4" × 1-1/4" Precision V Blocks and Clamp Set Steel Gauge Machinist
$
40.72
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
BRAND NEW Steel V Blocks With Clamp Set 1-5/8 × 1-1/4 × 1-1/4 90 Degrees Angle V-Blocks Made Of Tool Steel, Hardened And Precision Ground Chrome Steel ... moreSquare, Parallel And Concentric Maximum Diameter Of Bar: 1'' Completed With Wooden Box Unit Weight: 2 Lbs Quantity: 1 Brand Handdo MPN 679370 Block Type V-Block Shape V Block Degree 90 Block Material Hardened Steel UPC Does not apply.
Machinist Thin Parallel Bars 4 Pair 5/32x3" Thin Parallel Set
$
23.95
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
4 Pair 5/32x3" Thin Parallel Set 5/32"thick 3"length 1/2", 5/8", 3/4" & 7/8" width Precision ground and hardened Two 1/4" holes are provided for mounting. ... more4 Pair 5/32x3" Thin Parallel Set. Precision ground and hardened.
2 Pairs, STEEL PARALLELS Machinist Mill Blocks
$
24.55
Buy It Now
$12.95 Shipping
Condition: Used
Location: Spencerport, United States
1"-2"-3" BLOCKS (3) PARALLELS XLNT TOOLMAKER MACHINIST INSPECTION GRIND MILL QA!
$
160.00
Buy It Now
$15.00 Shipping
Condition: Used
Location: Sheffield, United States
TOOLMAKER MADE 1"2'3" BLOCKS WITH STAMPED NAME IN RECESS. 1MATCHED SET OF 3 ALL GROUND TOGETHER) OWNED BY TOOLMAKER MADE OF HARDENED AND ... morePRECISION GROUND TOOL STEEL USED BY WATCHMAKERS. MACHINIST AND TOOLMAKERS ALIKE. THESE ARE VERY ACCURATE BLOCKS FOR INSPECTION OR GRINDING AS NEEDED. BLOCKS ARE IN EXCELLENT CONDITION HAVING BEEN ORIGINALLY GROUND USING A HERMANN SCHMIDT SQUARING BLOCK AND MAGNA-SINE ON A BALLWAY SURFACE GRINDER IN. BLOCKS MEASURES 2.0000" WIDE X 2.9990" TALL AND 1.0002" THICK WITH(2) 3/4" BLIND DRILLED HOLES IN THE 3" LENGTH AS SHOWN. AS SHOWN IN EXCELLENT USED CONDITION! ALL HAVE MINOR STAINING FROM LONG TERM STORAGE IN HIS GERSTNER TOOLBOX! HIS SET OF 4 ARE LISTED AS ARE A SET OF 6 AND SET OF 8 SOON! WHAT MORE CAN I SAY ONLY THE MOORE 1"2"3" OR HERMANN SCHMIDTS 1"2"3" WE HAVE LISTED ARE AS NICE AS THESE! EXCELLENT USEFULL BLOCKS FOR SURFACE GRINDER OR BRIDGEPORT LIGHT MILLING WORK. WE HAVE BLOCKS JUST LIKE THESE ON A JIG-GRINDER AND EDM. THEY WORK VERY WELL. SEE PICS. HERMANN SCHMIDT 1"2"3" BLOCK'S WHEN AVAILABLE IN 2005 WERE $970 FOR A MATCHED SET OF 6 LIKE THESE! SAVE SOME $$ HERE! ONLY OUR MOORE TOOLS 1"2"3" ARE AS NICE AS THESE! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SH
Machinist Bench Block 3” Diameter 1-1/2” Height, 1/8-5/8” Holes 701-BB3
$
39.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
Precision machinist bench block• 3" Dia.x 1-1/2" H• Made from steel-hardened and ground • A handy tool for holding work when driving pins, drilling, etc.• ... moreThe knurled side provides a good gripping surface• V-groove across the face accommodates round and odd shaped stock• Holes from 1/8 to 5/8 (3-16mm) diameter
9 Pair Wavy Parallel Set .0002'' Steel Machinist Tool 1/2 to 1-1/2 Gages
$
32.92
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
9 Pair Wavy Parallel Set We value our customers and products like we value our photos in our ad. Thank you. Descriptions: Brand New 9 Pair parallel wavy ... moreset 9 pairs: 1/2 to 1-1/12 in 1/8" steps, contents include: 2) 1/2' 2) 5/8' 2) 3/4' 2) 7/8' 2) 1' 2) 1-1/8' 2) 1-1/4' 2) 1-3/8' 2) 1-1/2' Height and Parallelism to.0002" For precision clamping of parts in drilling. Boring, milling, grinding, assembly work, Use to clamp a group of flat parts. Also use to hold fragile or delicate parts, Hardened spring steel, Wooden case INCLUDED, Weight: 95lb(roughly) Case overall dimension: 5-1/4'L x 6-1/4'W x 2-1/8'H Quantity: 1 We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* 9.25% sales tax will be added at check out. Shipping and Handling to Lower 48 States: FREE SHIPPING Ground Service. Excluding PO BOX. APO, HI, AK, PR and GU. Additional shipping charge applies to APO. AK, HI, GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $ 28.00(1st unit) + $ 14.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received withi
4 VTG Machinist V Blocks Precision Toolmaker 6", 4", 3-3/8" Grinder Mill Tools
$
93.75
Buy It Now
$18.50 Shipping
Condition: Used
Location: Dearborn Heights, United States
If you're interested, you can take a look. These blocks are used. You can see this in the photos. We will send a new invoice each evening. ONLY ONE BLOCK ... moreHAS A CLAMP.
Vintage Machinist Round Bench 'V' Block
$
19.55
Buy It Now
$16.90 Shipping
Condition: Used
Location: Spencerport, United States
For sale is a General Tools Co. No. 114, round bench block. Made in USA from hardened steel with ground finished. V-groove across the face to hold round ... moreand odd shape work piece. Smooth finish on the face to prevent work piece from scratching. Knurled side strength gripping force Oversized holes from 1/8" to 5/8" Very good condition with no hammer marks on face or previous owners marks. Dimensions: Diameter: 3" Thickness: 1-1/2" Hole Size: 1/8" to 5/8" g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14a6e091cf3-0x10f-
TTC MACHINIST JACK ADJUSTABLE SCREW AND TILTING SWIVEL HEAD
$
10.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Coffeyville, United States
ADJUSTABLE SCREW AND TILTING SWIVEL HEAD. MACHINIST'S JACK. RANGE 75-100MM. CAPACITY: 1000LB.
FLAT ANGLE GAGE BLOCKS (15) 1* TO 45* MACHINIST TOOLMAKER INSPECTION GRIND QA
$
285.00
Buy It Now
$22.50 Shipping
Condition: Used
Location: Sheffield, United States
FLAT ANGLE GAGE BLOCKS. MOST BLOCKS ARE STAMPED WITH ANGLE AND INITIALS AS SHOWN. WE REGULARLY USE THESE UP AGAINST AN ANGLE PLATE TO SLIDE DRESS ANGLES ... moreON GRINDING WHEELS, SAVES WEAR AND TEAR ON YOUR HERMANN SCHMIDT RADIUS DRESSERS OR J&S RADIUS DRESSERS OR WHATEVER TYPE YOU DO USE.
Kennametal Boring Bar 1/2"X8" S08-STUNR2 INSERTS 9)T-221P MACHINIST TOOL LATHE
$
125.00
Buy It Now
$15.00 Shipping
Condition: Used
Location: Sheffield, United States
BORING BAR AND(9) NEW INSERTS KC 810 TPG 221 AS SHOWN. 1 INSERT INSTALLED) KENNAMETAL S08 STUN R2 NE3 $325 EACH NEW! INSERTS ARE ABOUT $12- $15 EACH FOR ... moreYOUR LATHE OR AS NEEDED. LOOKS TO HAVE BEEN USED VERY LITTLE DOES HAVE LIGHT SET-SCREW MARKS ON SHANK BUT HARDLY ANY PAINT LOSS ON INSERT END OF BAR! CURRENT LIST PRICE IS OVER $125 EACH FOR BORING BAR ALONE! SAVE SOME $$ HERE! THANKS FOR LOOKING MANY MORE ITEMS LISTED AND MANY ON SALE! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for FINAL SELLER BILLINGwhen done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us. In the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. CHECK OUR STORE FOR MANY MORE NICE HARD TO FIND TOOLMAKER ITEMS.INCLUDING OPTICAL RADIUS DRESSERS, J&S RADIUS DRESSERS, VISES AND PARALLEL SETS, MATCHED PAIRS OF ANGLE PLATES,VISES, VBLOCKS AND MANY OTHER HARD TO LOCATE ITEMS. WE HAVE MANY WELL MADE TOOLS LISTED AT AUCTION AND MANY MORE IN OUR STORE. PLEASE TAKE A MOMENT TO LOOK. THANKS. ALL TOOLS WERE STORED IN A GERSTNER BOX AND BASE SOON TO BE LISTED IN OUR STORE. SEE PICS. SEE OUR STORE! STARRETT 6" SCALE IS NOT INCLUDED. F
MACHINISTS' BENCH BLOCK & 5 PC EXTRA-LONG DRIVE PIN PUNCH SET (9999-0048)
$
37.38
Buy It Now
$19.00 Shipping
Condition: New
Location: Chino, United States
Machinists' Bench Block & 5 Piece Extra-Long Drive Pin Punch Set. The bench block is a handy tool for holding work when driving pins, drilling, etc. and ... moreis made from hardened and ground steel. The 5 piece pin punch set has a black nitrate finish and is alloy steel hardened on both ends.
CLEVELAND HS COBALT (3 PARALLELS TOOL BITS XLNT TOOLMAKER MACHINIST GRIND MILL
$
360.00
Buy It Now
$25.00 Shipping
Condition: Used
Location: Sheffield, United States
TOOLMAKER USED AS SHOWN HS COBALT TOOL BITS USED AS PARALLELS. OWNED BY A TOOLMAKER MADE OF HARDENED AND PRECISION GROUND HS COBALT TOOL STEEL USED. THESE ... moreARE NICE AND I'LL SHOW YOU IF YOU LOOK!
Machinist Set Up Right Angle Block 8" x 10" x 12"
$
120.00
Buy It Now
$99.00 Shipping
Condition: Used
Location: Unionville, United States
This Challenge Heavy Duty Right Angle Block Plate measures 12" x 10" x 8" and weighs approximately 66.6 lbs. It is used. And in very good ... morecondition. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. You are welcome to pick up your items with an appointment with no additional charges. Skidding charges will still apply. NO PAYPAL FOR WILL CALLED ITEMS Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Wi
35 pc THIN PARALLEL 1/8" x 6" JIG BLOCK BAR TOOL SET MACHINIST MACHINE SHOP
$
40.00
Buy It Now
$13.00 Shipping
Condition: Used
Location: San Diego, United States
This 35-piece thin parallel jig block bar tool set is a must-have for any machinist or machine shop. The 1/8" x 6" dimensions make it perfect for precise ... moreworkholding and toolholding, while the Anytimetools brand ensures quality and durability. Ideal for use in CNC, metalworking, and manufacturing industries, these blocks are designed to provide accurate and reliable performance. Whether you're working on a small project or a large-scale production, these thin parallel blocks will help you get the job done with ease. Invest in this tool set today and take your work to the next level.
Machinist Thin Parallel Bars 9 Pairs 1/4x6" Parallel Set
$
59.95
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
1/4 X 1-3/4 X 6" Parallel Set with 9 Pairs Made from fine quality tool steel that has been stress relieved against distortion. Precision ground and hardened. ... moreCase hardened RC 55 to 62 on 2 sides, top and bottom only.
BLOCKS VINTAGE 2) 1X2X3 MACHINIST TOOLMAKER PRECISE GRIND MILL INSPECT THRU HOLE
$
69.95
Buy It Now
$12.00 Shipping
Condition: Used
Location: Sheffield, United States
1" X 2" X 3" USED US A TOOLMAKER MADEBLOCKS IN RECENTLY PRECISION GROUND EXCELLENT USED CONDITION AS SHOWN. LIGHT STAINING BUT NO MILL DRILL OR GRIND ... moreMARKS AS SHOWN. USA MADE BLOCKS. ALL OTHER HOLES, (6) THRU ARE 5/8" THRU 1" THICKNESS.
ANGLE BLOCKS (4) VINTAGE TOOLMAKER MACHINIST INSPECTION GRINDING MILL LAY-OUT QA
$
34.95
Buy It Now
$15.00 Shipping
Condition: Used
Location: Sheffield, United States
BLOCKS ANGLE(4) THE 2 AT TOP ARE THIN(1/16" AND 45* AND 60* AS SHOWN. NOT HARD. BOTTOM LEFT IS A 2* HARDENED AND PRECISION GROUND. LAST IS A 30* ... moreSPECIALTY ANGLE BLOCK THAT HAS BEEN RE-GROUND TO 25* BEST SEEN IN PICTURES#6.7,8. BOTH ANGLES PARTIALLY REMAIN AS SHOWN. BLOCK IS HARDENED AND PRECISION GROUND VERY NICELY DONE! BLOCK HAS(5) TAPPED#10 X 32 HOLES AND(5) 8 X 32 THRU HOLES ALL IN GREAT SHAPE COMES AS SHOWN. BLOCK ALSO HAS A SLOT THAT IS.395" WIDE X 1.070" LONG. PLEASE LOOK. USA AMERICAN TOOLMAKER MADE& OWNED BY A 40+ YEAR TOOLMAKER. THANKS FOR LOOKING! PLEASE CHECK MORE OF OUR STORE WE HAVE MANY VERY HARD TO FIND ITEMS! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! ALL SIDES AND ENDS ARE SHOWN. I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. I HAVE MANY MANY MORE PARALLELS. PAR
Multi-use 2-3/8 x 2-3/8 x 2 Inch V Block & Clamp Gauge Gage Machinist Tool
$
51.20
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Brand New V Block Clamp Set Multi-use Gauge Gage Machinist Tool Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min.: 13/64" Capacity Max: 1-3/16" V-Blocks Are ... more90 Accuracy: 0.0002" All Sides Ground Square And Parallel To Each Other "V" Are Ground Central,Parallel And Square To The Ends Made Of Hardened And Ground Chrome Steel Wooden Storage Case Included Weight: 5 Lbs Overall Wooden Storage Case Quantity: 1 Small Freight Item Brand ALL-CARB MPN Does Not Apply Warranty 1 year Instrument Type Gage Block Block Material Hardened Ground Steel Block Type V-Block.
2-3/8'' x 2-3/8'' x 2'' V Block & Clamp Set Gauge Gage Machinist Tool Multi-use
$
51.20
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
2-3/8' x 2-3/8' x 2' V Block Clamp Set Descriptions: Brand New V block clamp set Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min. 13/64" ... moreCapacity Max: 1-3/16" V-Blocks are 90 All sides ground square and parallel to each other"V" are ground central. Parallel and square to the ends Made of hardened and ground chrome steel Wooden storage case INCLUDED Wooden storage case dimension: 3-1/2'L x 6-1/4'W x 3-1/2' Shipping Weight: 5 lbs Quantity: 1 Free shipping HAWAII(HI) ALASKA(AK) and PO Box. We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* sales tax will be added at check out. Shipping and Handling to States: FREE SHIPPING(Excludes: APO. GU, PR, VI) HAWAII(HI) ALASKA(AK) and PO Box OKAY! Additional shipping charge applies to APO. GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $50.00(1st unit) + $25.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received within 7 days or a Non Paying Bidder Alert will be filed. Return Policy: In-Order for us to Provide FREE SHIPPING. All Returns Are Subject to a 15% Restocking. Buye
1 2 3 4 5 6 7
 In 

Former Listings  
 
STARRETT 384 PARALLEL SET 4 PAIRS 8 TOTAL USA TOOLMAKER MACHINIST INSPECTION QA
STARRETT SET OF 384 PARALLELS IN EXCELLENT USEABLE CONDITION.THESE ARE ALL 8 STAINED WITH SPOTS AS SHOWN. SMOOTH ON THE SURFACE PLATE BUT STAINED WITH SPOTS? NO MILL DRILL OR GRIND DAMAGE BUT STAINED AS SHOWN. STARRETT 384 PARALLEL SET( 8 TOTAL PARALLELS FACTORY MATCHED PAIRS) WITH FACTORY WOODEN CASE. 8 TOTAL PARALLELS IN THIS SET. PRECISION GROUND PARALLELS AS SHOWN IN GENTLY USED CONDITION AS SHOWN. WE WERE TOLD THESE WERE NEW BUT FOUND STAINS ON ALL 8! PLEASE LOOK AT ALL OF THE PICTURES. THIS IS AN XLNT SET OF PARALLELS IN CASE 403.00 WHEN NEW LIST PRICE! PARALLELS MATCHED MEASURE 1/8" THICK X 1" TALL AND 6" LONG. SECOND MATCHED PAIR MEASURES 3/16" THICK X 7/8" TALL AND 6" LONG. THIRD MATCHED PAIR MEASURES 1/4" THICK X 3/4" TALL AND 6" LONG. FOURTH MATCHED PAIR MEASURES 3/8" THICK X 1/2" ... moreTALL AND 6" LONG. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your w
Precision Machinist Block 4" x 2" x 5/8"
This listing is for a Precision Machinist Block. Measures 4" x 2" x 5/8" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked ... moreup by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact our offices at 815-758-6534 or me persona
STARRETT No. 568 V BLOCK 3/8 - 16 NC V w/ clamp VINTAGE MACHINIST Made in USA
Greetings and thanks for checking out my posting! Available here is a nice. Vintage, Starrett no. 568 v-block. This is a high quality, precision vee block. Made in USA and probably at least 20 years old with plenty of life left in it! Comes exactly as shown with clamp. There are no marks or engravings on this block or clamp. It is available for just $57.00 or Best Offer. Shipping is $12.30 and it will ship in a Priority Mail. Medium sized box, wrapped in bubble wrap. Thanks again for looking! Please check out my other listings for more quality. Unique, precision machinist items.
MACHINIST BLOCKS, TOOL And DIE MAKER BLOCKS, SET OF 2, 5" x 5/8"th x 5/8th
ANOTHER SET OF BLOCKS FROM MY FATHER-IN-LAW. HE MADE LOTS OF THESE HIMSELF SO I DO NOT KNOW IF THESE ARE FROM A TOOL COMPANY OR IF HE MADE THEM. HE WAS A SERIOUS PERFECTIONIST. AN ENGINEER, MACHINIST AND OR A TOOL AND DIE MAKER. STARTED HIS CAREER, 1930-30'S WITH FORD MOTOR IN DETROIT THEN BURROUGHS. CONVERTED HIS BASEMENT INTO A"SHOP" WHERE HE TINKERED WITH ALL THESE THINGS IN HIS SPARE TIME. I'VE GOT HUNDREDS OF THESE TOOLS AND SOLD MANY ON EBAY ALREADY. I REALY DO NOT KNOW WHAT MANY ARE AND USE OTHER TOOLS FOR SALE ON EBAY FOR MY DESCRIPTIONS. THIS IS A MATCHED SET- THEY ARE IDENTICAL IN SIZE AND DESIGN. I BELEIVE THEY ARE CALLED"BLOCKS" THEY ARE EXACTLY 5" LONG. 5/8TH" WIDE AND 5/8TH" DEEP. THE HOLES ARE 5/8" IN DIAMETER- THERE ARE 5 HOLES IN EACH. HIS TOOLS ARE ALL OILY AND GREASY AND I ... moreUNDERSTAND THAT IS WHY THEY HAVE SURVIVED SO NICELY. I DID WIPE THEOIL OFF THESE BEFORE I PHOTOGRAPHED. I AM SELLING THEM AS A"SET" THEY ARE IN GREAT CONDITION FROM WHAT I SEE- PLEASE ZOOM IN ON THE PHOTOS. IF YOU ARE A TOOL COLECTOR OR A MACHINIST THEN PLEASE Check out my! MY STORE AS I Add more quite often. We're downsizing and have stored these tools since 1990. Got lots more vintage treasures too- from three generations! E5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13e2239cd09-0xf2-
8) Precision Machinist Blocks & Tools Lot **NO RESERVE**
GEMSYMONS ESTATE TREASURES GOLD& SILVER MAKE A GREAT GIFT OR INVESTMENT VALUE HAS NEVER BEEN BETTER.99 CENTS OPENING BID ALL ITEMS NO RESERVES! WE OFFER A TRUE ABSOLUTE AUCTION EVERYONE GETS AN EQUAL CHANCE All items are estate items. They may be new or used, but it will be clearly stated which. We sell nothing damaged or broken. No jewelry items are plated or filled unless clearly stated. We take pride in all the items we sell and want every transaction to be a happy one. We offer a 14 day no questions asked return policy. We value our feedback, so please contact us prior to leaving less than positive feedback so we may correct any problem you may have with your purchase. We are not perfect but we try our best to please our buyers. My name is Les and I will be happy to help any way I can. Thanks For Your Business! ITEM UP FOR AUCTION ... moreDESCRIPTION: 8) Precision Machinist Blocks& Tool Lot(Great Shape. Very Little Use) SPECIAL NOTE: THIS ITEM IS TOP QUALITY. IN PERFECT WORKING CONDITION AND CAME FROM A HIGH END MACHINE SHOP E STATE. IT S IN GREAT OVERALL SHAPE. PLEASE CHECK OUT OUR OTHER AUCTIONS THEY DON'T COME ALONG THIS NICE THAT OFTEN. THESE ITEMS ARE BEING OFFERED WITH NO RESERVE! THIS IS A GREAT CHANCE FOR ALL OUR BUYERS TO GET SOME OF THE BEST WE HAVE TO OFFER. MOST SITES WOULD LIST TH IS ITE M WITH A RESERVE TO START! THIS ITEM WOULD MAKE A GREAT GIFT OR ADDITION TO YOUR BUSINESS. TOP QUALITY& MADE TO LAST. SIMPLY THE BEST! SORRY NO INTERNATIONAL BIDDING ON THIS ITEM U.S. BIDDING ONLY PAYMENT POLICY ALL PAYMENTS MUST BE MADE WITH 7 DAYS OF AUCTION END ALL PAYMENTS MUST BE MADE BY PAYPAL WE RESERVE THE RIGHT TO RELIST ANY ITEM AFTER 7 DAYS OF AUCTION END THAT IS NOT PAID FOR SHIPPING POLICY ALL ITEMS ARE SHIPPED WITH 3 DAYS OF AUCTION END $ 4.99 WILL BE CHARGED FOR THIS ITEM NO COMBINED SHIPPING FREE COMBINED SHIPPING ON JEWELRY ITEMS ONLY UP TO 7 DAYS FROM FIRST PURCHASE NO COMBINED SHIPPING ON NON-JEWELRY ITEMS RETURN POLICY ALL RETURNS MUST BE MADE WITHIN 14 DAYS OF SHIPPING ALL ITEMS MUST
TRIANGLES 3/8" ANGLE GAGE BLOCKS 45* 30* VINTAGE TOOLMAKER MACHINIST INSPECTION
TRIANGLES OR ANGLE GAGE BLOCKS(2) 45-45-90 DEGREE AND A 30-60-90 DEGREE ANGLE GAGE BLOCKS AS SHOWN IN EXCELLENT USED CONDITION. BOTH PRECISION GROUND AS SHOWN USING NEW HERMANN SCHMIDT TOOLING! THESE ARE USED BY TOOLMAKERS AND MACHINISTS ALIKE FOR PRECISE MACHINING OR GRINDING OR INSPECTION OR EVEN A QUCIK SLIDE DRESS OF AN ANGLE ON GRINDING WHEEL! BOTH ARE IN EXCELLENT USED CONDITION WITH INITIALS STAMPED IN A RECESS AS SHOWN! SMALL OIL STAINS REMAIN ON TOOLS. YES THEY ARE HARD! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! 45-45- 90 DEGREE FLAT ANGLE GAGE BLOCK MEASURES.370" THICK x 3.934" TALL x 3.925" TALL. BLOCK HAS"INITIALS" STAMPED NEATLY AS SHOWN PRIOR TO HEAT-TREAT AND GRINDING PROCESSES. 30-60- 90 DEGREE TRIANGLE MEASURES.370" ... moreTHICK X 2.280" TALL AND IS 3.942" LONG. BLOCK HAS INITIALS STAMPED NEATLY AS SHOWN. A GREAT SET AND ONLY OTHER SET AS NICE ON EBAY IS HERE IN OUR STORE! SEE PICS. SAVE SOME $$ HERE ON THESE VERY NICE USED BLOCKS. MANY MANY OTHER V-BLOCKS IN MY STORE AND AT AUCTION. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING
Machinist block 4 7/8" long X 4" wide X 2 5/8 wide Great Condition
For Sale: Thick machinist block measuring 4 7/8" long X 4" wide X 2 5/8" wide Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited ... moreall monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me personally at(815) 299-7625 Monday through Friday between 11:00am and 7:00 CST. I can also be reached by e-mail. I will answer your e-mails or calls as s
Machinist Blocks Straight Edge 8 3/4" long by 2 3/4" Wide 1/2" Thick
Machinist Blocks Straight Edge 8 3/4" long by 2 3/4" Wide 1/2" Thick Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all ... moremonies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me personally at(815) 299-7625 Monday through Friday between 11:00am and 7:00 CST. I can also be reached by e-mail. I will answer your e-mails or calls as soon as po
Right Angle Blocks Set, Machinist Tool Mill Surface Grinder 8.5x8x5.5
Pair of Right angle blocks made of cast iron on good shape. Surfaces have some light scratches and nicks but look to be in nice shape. 8.5x8x5.5" Posted with
Machinist Set Up Precision Parallels Set Up Tools Blocks 6 8 Holes Mixed LOT
Up for auction today. We are offering a Machinist Set Up Parallels. These Parallels come in different sizes. These sizes come in- 6 inches long(6 holes) 4 inches(5 holes) 4 inches(5 holes) 8 inches(8 Holes) For further information please view the pictures or feel free to send us a message with your question. We offer a 100% money back guarantee for our customers. If you are unhappy with your item. Contact me through the eBay message system and we can arrange for a Return number(RA# No Problem! Thank you and happy bidding! Don't pass up on this offer any longer and check out our highly detailed photo's below before making your purchase to get a better understanding. Get this and many others like it for a great price when you shop my items on eBay today. Good luck. I hope you win! Powered by
2 HEAVY DUTY MACHINIST'S STEEL V - BLOCKS 2-1/2" x 8" x 6"
aims 2 HEAVY DUTY MACHINIST'S STEEL V- BLOCKS 2-1/2" x 8" x 6" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. These are 2 Heavy Duty Machinist's Steel V-block in good condition. Specifications V Size: 6" Groove: 1/4" Overall Dimensions: 2-1/2" x 8" x 6" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of ... moreproducts listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 HEAVY DUTY MACHINIST'S STEEL V- BLOCKS 2-1/2" x 8" x 6" Reliable Tool Inc. c 2011 | Powered by
MACHINIST PARALLELS 6 7/8 & 7 inches long, widths are stamped on the end *D
MACHINIST PARALLELS 6 7/8& 7 inches long. Widths are stamped on the end Condition/I n fo/Sizes: good condition All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Items must be won in the same week for a combined shipping discount. Notify me if you plan on bidding on multiple auctions. Payment due within 3 days of auction close unless other arrangements are made with me before the auction closes. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. ... moreI will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
BLOCKS (4) 1"-2"-3" 3/8"NC USA MACHINIST TOOLMAKER WOW INSPECTION GRINDER MILL!!
PARALLELS OR BLOCKS(4) 1"2"3" MATCHED SET OF(4) MATCHED HARDENED TOOL STEEL BLOCKS. GEORGEOUS FRESH GROUND. USA AMERICAN TOOLMAKER MADE BLOCKS! I HAVE SEVERAL SETS OF HIS BLOCKS AND PARALLELS ON NOW ALL ARE EXCELLENT! NO NAMES OR INITIALS OR ENGRAVINGS! 8 TOTAL ARE FOR AVAILABLE! ALL THE SAME SIZE BUT DIFFERENT DRILL AND TAP PATTERN. 2 SETS OF 4 FOR 8 TOTAL! TOOLMAKER MADE(4) 1" 996" THICK X 2" +( 2.014" WIDE X 3" 2.981" LONG. YOU GET 4 ALL FRESH PRECISION GROUND AND FRESH PRECISION GROUND.025" X 45* CHAMFERS ALSO! PRECISION GROUND ALL OVER IN USING HERMANN SCHMIDT TOOLING AND A BALL-WAY SURFACE GRINDER. ALL 4 ARE IN EXCELLENT USED CONDITION AS SHOWN. BLOCKS HAVE(4) THRU DRILLED 13/32" HOLES WITH(4) 19/32" COUNTER-BORES IN THE 1" THICKNESS. BLOCKS ALSO HAVE(4 TOTAL) TAPPED 1/4" ... moreX 20 HOLES IN 1" THICKNESS AND IN CENTER OF 1" X 3" FACE IS A TAPPED 3/8" X 16 THRU HOLE. BLOCKS ALSO HAVE(1) THRU HOLE 13/32" WITH A COUNTER-BORE 9/16" THRU THE 3" LENGTH AS SHOWN! ALL 4 HAVE BEEN FRESHLY GROUND AND ARE NEARLY PERFECT AS SHOWN. WHILE USED THESE STILL HAVE LOTS OF LIFE LEFT! VERY NICE SET TO BE SURE! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL fre
2 SMALL CUSTOM V BLOCKS 1.4x1.8x1.4 and 1.5x1.5x1.7 inches MACHINIST TOOLS *8
2 SMALL CUSTOM V BLOCKS 1.4x1.8x1.4 and 1.5x1.5x1.7 inches MACHINIST TOOLS Condition/I n fo: Good condition. Welcome to my Friday night auctions. Last weeks auctions auction close one minute apart and new ones go up. Action starts at 9:00PM Eastern time. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included ... moretracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
2 V BLOCKS with CLAMPS 2 3/4x2 7/16x1 15/16 in. MACHINIST TOOLS *8
2 V BLOCKS with CLAMPS 2 3/4x2 7/16x1 15/16 in. MACHINIST TOOLS Condition/I n fo: The clamps are either brass or bronze. No mfg name on the blocks. The pair weight in at almost 5 lbs. Welcome to my Friday night auctions. Last weeks auctions auction close one minute apart and new ones go up. Action starts at 9:00PM Eastern time. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are ... moreresponsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
2 STARRETT No. 271 SMALL V BLOCKS & CLAMP 1.2x1.2x1.2 in MACHINIST TOOLS *8
2 STARRETT No. 271 SMALL V BLOCKS& CLAMP 1.2x1.2x1.2 in MACHINIST TOOLS Condition/I n fo: Some rust stains. Only one clamp. Welcome to my Friday night auctions. Last weeks auctions auction close one minute apart and new ones go up. Action starts at 9:00PM Eastern time. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs ... moredo NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
BLOCKS(4) 1"X2"X3" 3/8"X16 MACHINIST TOOLMAKER MILL GRIND INSPECTION LAY-OUT WOW
PARALLELS OR BLOCKS(4 MATCHED) 1" X 2" X 3" LONG. MATCHED SET OF(4) OF HARDENED TOOL STEEL BLOCKS. USA AMERICAN TOOLMAKER MADE BLOCKS! I HAVE SEVERAL SETS OF HIS BLOCKS AND PARALLELS ON NOW ALL ARE EXCELLENT! TOOLMAKER MADE(4) 1" 1.000" THICK X 2" 2.000" WIDE X 3" 3.000" LONG. THESE APPEAR TO BE THE SAME AS HIS 1" 2" 3" SUBURBAN TOOL Co. B-123-H23M LISTED BUT MAYBE OIL-HARDENED SINCE HOLES ARE BLACKENED. HE OWNED ALL 6 BLOCKS! TOOLMAKER TOLD ME HE BOUGHT THE(2) SUBURBAN TOOL Co. B-123-H23 BLOCKS AND MADE 4 TO MATCH THEM! ALL 4 BLOCKS ARE IN EXCELLENT USED CONDITION AS SHOWN. MINOR STAINS AS SHOWN FROM OIL AND STORAGE. USED BUT STILL LOTS OF LIFE LEFT IN THESE! I WILL BE LISTING MANY SIMALAR BLOCKS IN SETS OF 3 OR 4 BLOCKS OR PARALLELS AND SETS OF BLOCKS AND PARALLELS PLUS SINGLE ... moreBLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. CHECK
2 Machinist Fishtail V Blocks 2-7/8 & 2-3/4 One Unused
Description- 2 Machinist V fishtail V Blocks 2-7/8 x 1-7/8 x 1-7/8 The black one has 5/16 holes and is used The steel color was removed from its protective coating for pictures 2-3/4 x 1-7/8 x 1-13/16 Condition- used/new Shipping Info- Item(s) will be shipped within 3 business days of payment being received via standard insured shipping. Any other type of shipping must be requested by the buyer. Who is responsible for any additional costs. Will ship internationally to certain locations. Return Policy- Buyer has 14 days to email their request to return the item. Return must be verified by seller prior to return. Buyer is responsible for return shipping costs for reasons other than damage incurred during shipping or defect not specified in item description.
2 V BLOCKS with CLAMPS 2 3/16 x 1 3/4 x 1 7/8 in. MACHINIST TOOLS
Up for bid are 2 Machinist V Blocks With Camps In Good Condition. Measure 2 3/16" x 1 3/4" 1 7/8" Comes with a storage box. No mfg. name and has the owner name on them. One block has chip on the top corner as seem in picture 5. Winning bid pays actual shipping. I will leave feedback when item is received. Good Luck!
THIN PARALLEL 1/8" 10 PAIR SET MACHINIST MACHINE SHOP
10 PAIR 1/8" X 1/2"1 5/8" THIN PARALLEL SET We ship fast! 1 day handling! set is in like new condition. Come in plastic protective case. Everything is in like new condition. Very lightly used. Thanks and please remember to take a few moments and leave feedback.
V BLOCK with CLAMP V-BLOCK WORK HOLDING MACHINIST TOOLS 3 1/2 x 1 7/8 x 1 7/8 *H
V BLOCK with CLAMP V-BLOCK WORK HOLDING MACHINIST TOOLS 3 1/2 x 1 7/8 x 1 7/8*H Condition/I n fo: Very good condition. Made in Taiwan The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to ... moreget notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
3 machinist bars base 6 1/2 x 9/16 x 7/8 unknown what for
3 machinist bars base 6 1/2 x 9/16 x 7/8 unknown what for. slight rust patina. these were in a machinist box and unknown what they are for. Edges are crisp. If you are unhappy I will refund your money
U.S.A!! 2 PRECISION Machinist STEEL V-BLOCKS W/ CLAMP - 2.5" 1 7/8" 2 " High
Really nice set of v block 2 inch high by 2.5 by 1 7/8 any questions please ask Posted with
MACHINIST PARALLEL BLOCK WORK HOLDING 3/4 X 1 X 5 7/8
MACHINIST PARALLEL BLOCK WORK HOLDING 3/4 X 1 X 5 7/8 CONDITION: USED– Normal Wear and Tear– See Pictures Good Working Condition: CORNER ON ONE BLOCK IS SLIGHTLY CUT SEE PHOTO– THE METAL IS NOT RAISED Discounts– This only applies to items displaying this promotion. You must WAIT for an INVOICE to get these discounts. Items must be purchased on the same day. Buy 2 items 3% Discount Buy 3 items 5% Discount Buy 4 items 7% Discount Buy 5 items 10% Discount Please e-mail with questions Will Combine shipping
MACHINIST Blocks Muglia 9 1/4" x 1 3/8" x 1 5/8"
OUR STORE ASK A QUESTION RETURN POLICY BOOKMARK US CHECK OUR FEEDBACK MACHINIST Blocks Muglia 9 1/4" x 1 3/8" x 1 5/8" Description Barely USED Size: Length 9 1/4" Please see pictures for more details Please pay within 2 days. We will ship within 2 days. Thanks for buying! Regards, Get a Grip& More Posted with
MATCHED PAIR OF V BLOCKS & CLAMPS 1 3/4 x 1 5/8 x 1 5/8 MACHINIST TOOLS *D
MATCHED PAIR OF V BLOCKS& CLAMPS 1 3/4 x 1 5/8 x 1 5/8 MACHINIST TOOLS Condition/I n fo: Excellent condition. If you see any brown marks on the blocks that is a preservative oil(not stains) The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& ... moretracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
2 PC PARALLEL MACHINIST VISE LATHE BLOCK, 8" X 2 1/4 X 1", #49918
This listing is for a lightly used machinists parallel block in a 1"D X 2 1/4"H X 8 1/8"L size ON EACH SIE. In good condition with no repairs and no rust. No maker's mark. PLEASE NOTE: Ths item ships via FedEx Ground or home delivery. PART#49918. Check out my! OUR RETURN POLICY: IN THE EVENT YOU DETERMINE THIS ITEM WILL NOT WORK AS YOU THOUGHT OR YOU’VE CHANGED YOUR MIND. WE WILL GLADLY REFUND THE ORIGINAL PURCHASE PRICE OF THE ITEM(ORIGINAL SHIPPING WILL NOT BE REFUNDED AND BUYER PAYS RETURN SHIPPING) YOU CAN RETURN THE ITEM BY: CONTACTING US AS SOON AS POSSIBLE(UP TO THE 14 DAYS ALLOWED IN THE LISTING) EXPLAINING YOUR DESIRE TO RETURN THE ITEM. SHIP WITHIN 3 DAYS OF YOUR NOTICE TO US REGARDING INTENT TO RETURN THE ITEM. PLEASE EMAIL THE TRACKING DATE AND NUMBER IMMEDIATELY(AGAIN. WITHIN THE 3 DAYS OF NOTIFICATION) ITEM ... moreSHOULD BE PACKED AND SHIPPED IN THE SAME MANNER IT WAS RECEIVED. WE WILL REFUND YOUR PURCHASE PRICE UPON RECEIPT OF ITEM& CONFIRMATION THAT IT IS IIN THE SAME CONDITION AS WHEN IT WAS SHIPPED.
HERMANN SCHMIDT HIGH PRECISION MACHINIST VICE GRINDING 6.5 x 3 x 2 3/8 *D
HERMANN SCHMIDT HIGH PRECISION MACHINIST VICE GRINDING. Dimensions 6.5 x 3 x 2 3/8 inches. Condition/I n fo: One small tool mark on the vice(see close up photo where I am pointing to it with a pen) It is marked with the previous owners name(see last photo) otherwise in Excellent Condition! This is a beauty so don't miss out. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. ... moreShipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f554fec07-0xfb-
MACHINIST TOOL MAKERS PARALLELS 5/8" X 1 3/4" X 8 LONG CUSTOM MADE (PAIR)
PREVIOUSLY OWNED. USED, CUSTOM MADE, TOOLMAKERS PARALLELS. SIZE = WIDTH = 5/8" HEIGHT = 1 3/4" LENGTH = 8" HARDENED AND PRECISION GROUND ALL OVER. VERY NICE PARALLELS WITH LIGHTENING HOLES. BEVELED EDGES ALL AROUND. MADE BY A TOOL AND DIE MAKER. MAY HAVE A NAME ENGRAVED ON THEM. PREVIOUSLY OWNED MEANS THIS ITEM IS BEING SOLD AS IS. NO WARRANTY IS EXPRESSED OR IMPLIED. NO EXCHANGES OR RETURNS ALLOWED.
Precision Parallel 3/8" x 3/4" x 3 7/8" Set Up Bar Machinist Tool
Precision Parallel 3/8" x 3/4" x 3 7/8 Set Up Bar Machinist Tool Very hard to find and usually very expensive. Not here. Low prices and various sizes available. shipping will always be combined to save you more.
MACHINIST TOOLS LATHE MILL V blocks & hold clamps 8 parts in all
4 v blocks 2 small 1 med 1 specialty v block 2 clamps for V blocks and 2 bars not sure what there for
Machinist V Block 4-3/8" X 2-3/8" X 1-13/16"
Used V block as shown. Non magnetic. Thanks for looking! Posted with
LARGE WORK HOLDING BLOCK GRINDING MACHINIST TOOLS 4 7/16 in square 8.5 lbs *X
LARGE WORK HOLDING BLOCK GRINDING MACHINIST TOOLS 4 7/16 in square 8.5 lbs*X Info/Sizes: With all the tapped holes in this block you will be able to clamp just about anything. Important vacation notice for July- If you pay your invoice on time I will ship your item(s) before I leave on vacation. If not. Your shipment can be delayed for over two weeks. Payment due within 48 hours of auctions close. If you are going to bid on other auctions contact me for a payment extension. The scale in the photo(if shown) is for reference only and is not included in this auction. All items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money(if possible) Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& ... morewhen you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
Set of 3 machinist blocks 16", 13" and 3" long and 1", 5/8" 34" wide
For Sale: Set of 3 machinist blocks block 1 measures: 16" x 1" block 2 measures: 13" x 5/8" block 3 measures: 3" x 3/4" These are in great shape and will serve their function well. Feel free to contact us with any questions you may have Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size ... moreof the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Fee
MACHINIST GAUGE BLOCK PLATE INSPECTION MEASUREMENT 8 3/4" X 3" SHIM PUNCH
I HAVE WHAT I THINK IS A MACHINIST GAUGE OR MEASUREMENT PLATE. IT HAS ALL THE DIFFERENT SIZES ON EACH HOLE. I AM NOT VERY FIMILIAR WITH THIS ITEM SO PLEASE LOOK AT ALL THE PICTURES AND ASK QUESTIONS BEFORE BIDDING. ANY INFO WOULD BE HELPFUL. I AM BEING TOLD IT IS A SHIM PUNCH SET. PLEASE MAKE YOUR OWN DETERMINATION.
RIGHT ANGLE WORK HOLDING BLOCK 5 7/8 x 4 x 3 7/16 GRINDING MACHINIST TOOLS *PLT
RIGHT ANGLE WORK HOLDING BLOCK 5 7/8 x 4 x 3 7/16 GRINDING MACHINIST TOOLS*PLT Info/Sizes: Very good condition. Weights 7 lbs Important vacation notice- If you pay your invoice on time I will ship your item(s) before I leave on vacation. If not. Your shipment can be delayed for over two weeks. Payment due within 48 hours of auctions close. If you are going to bid on other auctions contact me for a payment extension. The scale in the photo(if shown) is for reference only and is not included in this auction. All items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money(if possible) Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an ... moreinvoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
~~~ MACHINIST TOOL ANGLE BLOCKS 8 PIECES VERY NICE LOT 3~~~
This auction is for 8 angle blocks that are ¼ inch wide. You’ll get these angles: 1 deg. 2deg, 3deg, 4deg, 6deg, 7deg, 8deg, 9deg, Can’t tell if these are factory or home made, black oxide finish, and they look like they have been used very little. CHECK MY OTHER TOOL AUCTIONS
VINTAGE TIETZMANN No.8 Machinist Step Blocks 4 pc SET
TIETZMANN ENGLEWOOD. OHIO No.8 Machinist Step Blocks 4 pc SET These are in very good used condition. They come from a retired machinist. Each one measures approx. 3 3/4" x 2 1/2" x 4 1/2" MY GOAL IS TO BE AS ACCURATE AS POSSIBLE IN MY DESCRIPTIONS SO PLEASE IF YOU HAVE QUESTIONS ASK THEM PRIOR TO BIDDING AND I WILL GET BACK WITH YOU ASAP. I accept payment via PayPal. This item will be shipped upon confirmation of payment. I SHIP WITHIN THREE BUSINESS DAYS FOLLOWING PAYMENT. I PREFER USA shipments only(HAWAII AND ALASKA COSTS WILL BE HIGHER) I WILL SHIP INTERNATIONALLY HOWEVER PLEASE CHECK WITH ME PRIOR TO BIDDING WITH COUNTRY AND FOR SHIPPING COST. No returns. Smoke free/pet free home. Please check my other listings for similar items. Thanks for looking.
Thin Parallel 1/8" 10 Pair Set Machinist Machine Shop Tools
10 Pair Thin Parallel Set Machine Tools You are bidding on One(1) Set of 10 Parallels. This item was previously owned and is in fair condition. Comes in original case. Pieces do have some rust on them. See photos. Product Details All parallels 1/8" thick x 6" long. With one pair of each of the following heights: 1/2" 5/8" 3/4" 7/8" 1" 1 1/8" 1 1/4" 1 3/8" 1 1/2" 1 5/8" Please Look at the Pictures and Feel Free to Ask Questions. Affordable Thrift Buy& Sell Will Always Make time to Answer your Questions and Ensure that You, Our Customer, Will Know exactly what you're Bidding on. This item is for SALE in our store and is listed on other sites so we reserve the right to end the auction at any time. We WILL NOT SHIP outside of the U.S. so Please do not Bid if you are not a U.S. ... moreResident. Call if you have any questions Affordable Thrift Buy& Sell LLC AT 630-766-1166 We are located at 423 East Irving Park Road in Wood Dale 60191. You can ALSO pickup your item at Affordable Thrift Buy& Sell LLC at 423 East Irving Park Road in Wood Dale Illinois 60191. Our number is 630-766-1166 T So don't miss out; buy today. Good Luck! AFFORDABLE THRIFT BUY& SELL LLC
MACHINIST PERCISION PARALLEL SET STEEL 10 PAIR 1/8 THIN SHOP PARALLEL BARSS
Machinist"parallels" They do have light to heavy rust scathing. They are in"great condition" they are flat. There are"no" bends. Nicks, ping or dings. These items are"clean" Ten pairs ranging from: 1/8 X 1/2 X 6" to 1/8 x 1-5/8 X 6" Paypal Only
V BLOCK machinist set up tool mill milling machine grinder 2 3/8" x 2 1/2" x 3"
good used V block marked LACEY approx 2 3/8" x 2 1/2" x 3" with clamps please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
SINE BAR 1-5/8" TOOLMAKER MACHINIST VINTAGE INSPECTING TOOL GRINDER MILL HARD QA
SINE BAR 1-5/8"+ WIDE IN VERY GOOD USED CONDITION AS SHOWN. SINE BAR MEASURES 1.648" WIDE X.990" TALL OVER THE.625" ROLLS AND IS ABOUT 6" LONG. SOME STAINING AS SHOWN. BA" STAMPED ON SIDE AS SHOWN. 16) TAPPED#10 X 32 HOLES IN TOP FACE ALONE. 12) 1/4" THRU HOLES ALSO IN TOP FACE. TAPPED HOLES#10 X 32 ON EACH END FOR STOPS OR RAILS. 2 MORE TAPPED HOLES ON EACH SIDE AS SHOWN. PLEASE LOOK. STARRETT WEBBER 2" GAGE BLOCK IS NOT INCLUDED BUT USED FOR ANGULAR REPRESENTATION ONLY. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So ... morethat I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final SELLER BILLING when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. I USE A HERMANN SCHMIDT SQUARING BLOCK OR VISE AND A HERMANN SCHMIDT MAGNETIC SINE CHUCK FOR ACCURACY AND THEY DO VERY WELL BOTH PICTURED IN MANY AUCTIONS! I DO
Thin Parallel 1/8" 10 pair Set Machinist Tool w/ Case Good Condition Machine
Description Item: Thin Parallel 1/8" 10 pair Set Condition: This set of thin parallels are in good condition. There is light signs of use. However none are deformed or have excessive wear. They are tools, so scuffing is expected. Overall nice condition. View pictures for greater detail. Size: 1 1/8" x 1/8" x 6" Colors: Metal Comments: This item was previously owned. We are an estate liquidation company and are not experts on any one particular product. So please view photos closely for details and ask questions before purchasing. All items are sold"As-Is, Where-Is" with no warranty implied. Please refer to the terms of our return policy. Buyer pays return shipping. Thank you for looking! We stand behind each listing; our customer ratings are very important to us. We strive to do our best to ensure our customers ... moreare 100% satisfied. So please contact me if you have any questions. Concerns or problems prior to purchase or upon arrival of shipment. View My Other Items For Sale View My Feedback DZ-090413-RCK10 Payment Paypal is the only form of payment we accept. Winner is excepted to pay within 7 days or I will relist the item. Sometimes exceptions can be made but please contact me first. Buyers in California will be charged 8.00% sales tax. Shipping Items are shipped by Fedex Ground or by USPS depending on weight and size of item. We ship daily. Monday through Friday. If you pay for your item before 7:00am Pacific Time, it will ship the same day. Otherwise, it will ship the next business day. International Buyers- Please Note: We offer international shipping on everything we're able to. If an item can be shipped internationally(outside the US and Canada) there will be an advertised shipping rate included in the listing. If you do not see international shipping offered on the listing then the item is too large to ship to your country. Your customs form will include accurate information. Do not ask me to falsify the customs form. Import duties. Taxes, and charges are not included in t
8 Fractional Angle Set Up Blocks Machinist Gunsmith Lathe Milling Shop Tools lot
Ebay Base This auction is for 8 precision ground angle set up blocks. The angles in fractions of degrees are 0.1. 0.15, 0.3, 0.45, 0.5, 0.6, 0.7, 1.3 degrees. These are 1/4" thick by 3" long. These are approximately 3" long x 7/8" wide. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1413c8b075b-0xf9-
Machinist Set-Up Steel Fixture V Block Screw Vise 2 29/32" x 1 7/8" x 2"
Machinist Set-Up Steel Fixture V Block Screw Vise. Approximate dimensions: 2 29/32" x 1 7/8" x 2" Holes are threaded. One Large hole is not threaded. These items are from my Grandfather's cherished possessions. A Machinist/Master Tool& Die for Revell Models for over 50 years. I will be listing these items for the next four weeks. Check out my! Thank you for taking a look at my auction. I do my best to describe what I have to offer. I try to take decent photographs to represent the item. See photos for detailsPlease Note: The photos with this listing are part of the description for this item. Photos are of the actual item and have not been touched up to cover any flaws. I will combine shipping Shipping is tricky these days. With flat rate boxes and so on. I try to be fair with shipping. If I have over charged for shipping ... moremore than a few bucks, I will refund the money on Paypal. I sometimes used recycled boxes or envelopes. I try to also recycle popcorn and bubble wrap. To save the customer money and the environment. Please feel free to email with any and all questions.
Pair Vintage Machinist Set-Up Steel Blocks 2 3/16" x 1" x 1 1/8" cut 3/8"
Two Vintage Machinist Set-Up Steel Blocks. See photos for details of construction. Approximate dimensions: 2 3/16" x 1" x 1 1/8" cut 3/8" These items are from my Grandfather's cherished possessions. A Machinist/Master Tool& Die for Revell Models for over 50 years. I will be listing these items for the next four weeks. Check out my! Thank you for taking a look at my auction. I do my best to describe what I have to offer. I try to take decent photographs to represent the item. See photos for detailsPlease Note: The photos with this listing are part of the description for this item. Photos are of the actual item and have not been touched up to cover any flaws. I will combine shipping Shipping is tricky these days. With flat rate boxes and so on. I try to be fair with shipping. If I have over charged for shipping more ... morethan a few bucks, I will refund the money on Paypal. I sometimes used recycled boxes or envelopes. I try to also recycle popcorn and bubble wrap. To save the customer money and the environment. Please feel free to email with any and all questions.
TAFT PIERCE MACHINIST PARALLELS , 7/8 x 7/16" x 6" , LOT OF 2
GOOD CONDITION. HAVE OWNERS MARKS.
2 Machinist Screw Jacks Gunsmith Toolmaker Lathe Milling Shop Tools 1 3/4- 2 5/8
2 MACHINIST SCREW JACKS IN EXCELLENT USED CONDITION. THEY WORK PERFECTLY& EXTEND FROM 1 3/4" TO 2 5/8" THESE WERE FROM A RETIRED WHIRLPOOL CORP. MACHINISTS TOOLS. BE SURE TO CHECK OUT PICTURES FOR A GOOD LOOK. I WILL BE LISTING A LOT OF OTHER MACHINIST TOOLS IN THE NEXT FEW DAYS SO BE SURE TO SAVE ME AS A SELLER AS I AM ALWAYS LOOKING FOR MACHINIST TOOLS TO LIST. $5.95 SHIPPING TO THE LOWER 48 U.S. STATES. THANK YOU FOR LOOKING! di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14189967680-0xfb-
HEAVY DUTY MACHINIST'S STEEL V - BLOCK 8" x 4" x 5-1/2"
aims HEAVY DUTY MACHINIST'S STEEL V- BLOCK 8" x 4" x 5-1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Heavy Duty Machinist's Steel V-block in good condition. Specifications V Capacity: 4-1/2" Groove: 5-1/6" Overall Dimensions: 8" x 4" x 5-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HEAVY DUTY MACHINIST'S STEEL V- BLOCK 8" x 4" x 5-1/2" Reliable Tool Inc. c 2011 | Powered by ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-141ac4269d1-0xfe-
VINTAGE MACHINIST TOOLMAKER LOT OF 8 METAL FIXTURES BLOCKS LAYOUT SET UP
VINTAGE MACHINIST TOOLMAKER LOT OF 8 METAL FIXTURES BLOCKS LAYOUT SET UP. These items are from my Late Grandfather's cherished possessions. A Machinist/Master Tool& Die for Revell Models for over 50 years. I will be listing these items for the next four weeks. Just the item(s) listed in title are included. The rulers are also not included. Check out my! Thank you for taking a look at my auction. I do my best to describe what I have to offer. I try to take decent photographs to represent the item. See photos for detailsPlease Note: The photos with this listing are part of the description for this item. Photos are of the actual item and have not been touched up to cover any flaws. I will combine shipping Shipping is tricky these days. With flat rate boxes and so on. I try to be fair with shipping. If I have over charged for shipping ... moremore than a few bucks, I will refund the money on Paypal. I sometimes used recycled boxes or envelopes. I try to also recycle popcorn and bubble wrap. To save the customer money and the environment. Please feel free to email with any and all questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-141b4655bf6-0x100-
MACHINIST TOOL 90 DEGREE RIGHT ANGLE SET UP BLOCK 3 X 2 7/8 X 4
MACHINIST TOOL 90 DEGREE RIGHT ANGLE SET UP BLOCK 3 X 2 7/8 X 4 CONDITION: Used– Normal Wear& Tear– See Pictures Will Combine Shipping– Request Invoice All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a mistake in the AD the shipping difference will be immediately refund. Please e-mail with questions
2 MATCHED V BLOCKS 4 x 2 5/8 x 1 5/8 in MACHINIST TOOLS *X
2 MATCHED V BLOCKS 4 x 2 5/8 x 1 5/8 in MACHINIST TOOLS*X Info/Sizes: Good condition. A couple of small nicks. SPECIAL OFFER: Win 5 auctions and get FREE SHIPPING! Auctions must close on the same day. USA only. Foreign customers will receive a discount. I also combine items to save you some cool cash. Let me know if you are bidding on other auctions. When you are done bidding notify me and I will send you a combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. Engraved, and there may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. If you are going to bid on other auctions contact ... moreme for a payment extension. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
V BLOCK machinist set up tool mill milling machine grinder 1 3/4 x 2 1/8 x 2 1/4
good used V block mfg unknown approx 1 3/4 x 2 1/8 x 2 1/4 will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Precision Machinist Block Bender Die,P4,5/8"tall,3/8"wide,1/2"dovetail
Precision Machinist Block Bender Die P4 5/8"tall 3/8"wide 1/2"dovetail Normal 0 false false false MicrosoftInternetExplorer4 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate ... morerequired. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PLEASE NOTE: The
Precision Machinist Block Bender Die, HR13,5/8"tall,7/8"wide,1/2"dovetail
Precision Machinist Block Bender Die HR13 5/8"tall 7/8"wide 1/2"dovetail Normal 0 false false false MicrosoftInternetExplorer4 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate ... morerequired. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PLEASE NOTE: T
Precision Machinist Block Bender Die, P7,5/8"tall,7/8"wide,1/2"dovetail
Precision Machinist Block Bender Die with Dovetail P7 5/8"tall 7/8"wide 1/2"dovetail Normal 0 false false false MicrosoftInternetExplorer4 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size ... moreof the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PL
Precision Machinist Block Bender Die,HR3,5/8"tall,1"wide,1/2"dovetail
Precision Machinist Block Bender Die HR3 5/8"tall 1"wide 1/2"dovetail Normal 0 false false false MicrosoftInternetExplorer4 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate ... morerequired. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PLEASE NOTE: Ther
Precision Machinist Block Bender Die,19,1 1/8"tall,1"wide,1/2"dovetail
Precision Machinist Block Bender Die#19 1 1/8"tall 1"wide 1/2"dovetail Normal 0 false false false MicrosoftInternetExplorer4 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate ... morerequired. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PLEASE NOTE: The
Set of (2) Matched 2" x 4" x 8" Machinist Blocks, 2-4-8, Precision Ground, Hard
Set of(2) Matched 2" x 4" x 8" Machinist Blocks. These are probably homemade but measure right on. They were checked with a caliper on the 2" and 4" side only. we currently do not have an 8" micrometer or caliper) They are precision ground and hardened. Some light spotting is noted. No pitting. They are smooth to the touch. Markings in the oval undercuts shown. Visit our eBay store for more great values. Shipping and handling costs for this listing will be $13.95 within the U.S.A. We will ship internationally if a cost or calculator shows below. Or please inquire for international shipping costs. We will ship promptly and will do all we can to make sure you are satisfied with your purchase. Sales. And invoices for sales within the state of Michigan will have sales tax added. Thank you! 0913)
Set (10) PAIR Machinist Matched Parallel Set, 1/2" to 1 5/8" tall by 1/8",w/ Box
Set of(10) PAIR Machinist Matched Parallels. The set starts at ½” tall and goes to 1 5/8” tall by 1/8” Increments. They are all 1/8” thick and 6” long. Each has the size on it along with“China” The tools are bright and in excellent condition. A couple of the pairs has some superficial staining in spots. Otherwise they are bright and shiny. The wooden box is original and in excellent condition with a locking hasp. Visit our eBay store for more great values. Shipping and handling costs for this listing will be $12.95 within the U.S.A. We will ship internationally only if a cost. Or international shipping calculator, shows below. We will ship your order promptly. Sales within the state of Michigan will have sales tax added to the total. Thank you! 0114) lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-143cadf4043-0xd5-
ANGLE PLATE COMPOUND 2X2X3-1/8" INSPECTION GRINDING MILL TOOLMAKER MACHINIST QA
ANGLE PLATE COMPOUND(1) 1-1/2" WIDE X 1-1/2" TALL X 3-1/8" LONG AS SHOWN! MADE OF HARDENED TOOL STEEL AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS. MACHINIST AND TOOLMAKERS ALIKE. PLATE IS IN EXCELLENT USED CONDITION AS SHOWN IN 12 SUPER-SIZE PICTURES. COMPOUND ANGLE PLATE WITH MINOR STAINS FROM HANDLING AS SHOWN. NO NAMES OR ENGRAVING. PLEASE LOOK! PRECISION GROUND COMPOUND ANGLE PLATE. ANGLE PLATE HAS( 27) 10 X 32 HOLES AS SHOWN. ORIGINALLY GROUND USING HERMANN SCHMIDT SQUARING BLOCK AND A BALL-WAY SURFACE GRINDER WOW IT IS NICE! COMPOUND ANGLE PLATE MEASURES 1.499" WIDE X 1.479" TALL X 3.126" LONG. SQUARING AREA. MEASURES.999" X.999" LAYED IN OPPOSITE DIRECTION THE CLAMPING AREA MEASURES.978" X 1.623" BLOCK HAS(27) TAPPED 10 X 32 HOLES IN ITS EDGES AND FACES AS SHOWN TO BOLT DOWN ... moreON YOUR BRIDGEPORT OR AS NEEDED. BLOCK ALSO HAS(1) 5/16" REAMED HOLE THRU TO BOLT DOWN AS NEEDED. THESE ARE SUPER HANDY FOR MOST GRINDING AND LIGHT BRIDGEPORT WORK ALSO! USE BUY NOW AND I WILL INCLUDE(2) TOOLMAKER MADE SWIVEL CLAMPS WITH THIS BLOCK if BUY NOW IS USED. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for FINAL SELLER BILLING when done bidding. FREE SHIPPING APPLIES TO ONE FREE
Nice Used Small 2 1/8"x 2 1/8'x 1 7/8" V Block, Machinist Tool Holder
It has some light rust! Unmarked V block in very good shape! Measurements 2 1/8" x 2 1/8" x 1 7/8" Weight 2 lb. Priority mail shipping $6.85 with delivery confirmation! USA Shipping Only!
MACHINIST PARALLELS I-BEAM (4 PAIRS) 1-3/4, 1-1/2, 1-1/8, 7/8
MACHINIST PARALLELS I-BEAM(4 PAIRS) 1-3/4. 1-1/2, 1-1/8, 7/8 CONDITION: Used– Normal Wear and Tear Good Condition– See Pictures Will Combine Shipping– Request Invoice All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a shipping difference that money will be immediately refund. Please e-mail with questions
Machinist 1-3/8" Cap. Steel V Block 2-3/8" OAL
ALL OUR AUCTIONS START FROM.99 CENTS@ THEPLACETOBUY1984! The Item You Are Bidding On Is a V Block. With Overall Dimensions Including: V Capacity: 1-3/8" Overall Dimensions: 1-3/4" W x 2-3/8" L x 1-1/2" H ITEMS COME AS SHOWN IN PICTURES. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Just a Few Simple Notes on Shipping and Other Questions Below Before Paying. Please Ask For Shipping DISCOUNTS When Purchasing Multiple Items. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. If you have ANY shipping questions, please contact us PRIOR to bidding. We apologize for any inconvenience but unless prior arrangements are discussed. We DO NOT ship ... moreinternationally. Please E-MAIL US at theplacetobuy1984@gmail.com or through eBay Messages if you have QUESTIONS or CONCERNS. Our goal is to be clear about our products and prices so that you are happy with your purchase! How to Request an Invoice so Shipping is Correct and Up To Date: 1. Click COMMIT TO BUY 2. DO NOT CLICK PAY NOW 3. Go to Ebay Summary. Under PURCHASES 4. Select MORE ACTIONS 5. Select REQUEST TOTAL. Thank You For Looking And Good Luck Bidding!
FISHTAIL V-BLOCK & CLAMP 3.6 x 1.8 x 1.8 inches MACHINIST TOOLS MILLING *6
FISHTAIL V-BLOCK& CLAMP 3.6 x 1.8 x 1.8 inches MACHINIST TOOLS MILLING*6 info/sizes: Rust& stains on bottom of block Travel notice: I will be traveling during the month of February and March and schedule my auctions accordingly. As long as you pay your invoice on time(24 hrs) I will promptly ship your item(s) Late payments can delay shipping from 1 to 2 weeks. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless ... morestated otherwise. Payment due within 24 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Subscribe to my newsletter for special offers. Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
Starrett No. 568 Machinist V BLOCK 3/8"-16 EM1
Starrett No. 568 Machinist V BLOCK 3/8"16 Please feel free to email with any further questions that you may have. And I will do my best to try to help. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best to ship quickly, but never at the expense of quality delivery. RETURN POLICY: We are offering a ... more3 day right of return on this unit. Buyer to return the unit within 5 days of receipt of unit. Buyer responsible for return shipping. The auction description is written as a guide. We strongly recommend that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
Parallels, (8) Brown & Sharpe No. 673 Adjustable Machinist Parallels, USA
Normal 0 For your Consideration are these(8) Brown& Sharpe No. 673 Adjustable Machinist Parallels. Included are the following Model Numbers: 1) 673-6. 3) 676-5, 1) 673-4, 1) 673-3, 1) 673-2, 1) 673-1 Adjustable Parallels. These tools are in good used working condition. Please see pictures and email me with any questions. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB10.1-5410-17 Normal 0 false false false EN-US X-NONE X-NONE International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By ... morepurchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
2 pc parallel machinist vices lathe blocks 6 /8"l x 1 1/8" h x 5/8"d #49923
NEW RV window(no maker's tag.came from Monaco MH) with HORIZONTAL SLIDER in the lower half of window. Rough opening size of 45" horizontally at the top and 49 1/2" horizontally at the bottom x 47 1/4" vertically on the long side and 37 vertically on the short side. Includes screen and trim ring. Window frame is black. Glass is a bronze dual pane glass. We have two of these in stock at this price.unit B420 is new with no signs of installation but it does show signs of a dent in the frame. Unit B421 is new with no damage and also has screen and trim ring. PLEASE NOTE: THIS ITEM SHIPS VIA FEDEX HOME DELIVERY. DELIVERY TO A COMMERCIAL ADDRESS MAY BE LESS. THERE IS AN ADDITIONAL $25 CRATING FEE PAYABLE AT THE TIME OF PURCHASE. PLEASE REQUEST INVOICE AT THE TIME OF PURCHASE FOR ACCURATE COST OF SHIPPING TO YOUR ADDRESS. OUR RETURN ... morePOLICY: IN THE EVENT YOU DETERMINE THIS ITEM WILL NOT WORK AS YOU THOUGHT OR YOU’VE CHANGED YOUR MIND. WE WILL GLADLY REFUND THE ORIGINAL PURCHASE PRICE OF THE ITEM(ORIGINAL SHIPPING WILL NOT BE REFUNDED AND BUYER PAYS RETURN SHIPPING) YOU CAN RETURN THE ITEM BY: CONTACTING US AS SOON AS POSSIBLE(UP TO THE 14 DAYS ALLOWED IN THE LISTING) EXPLAINING YOUR DESIRE TO RETURN THE ITEM. SHIP WITHIN 3 DAYS OF YOUR NOTICE TO US REGARDING INTENT TO RETURN THE ITEM. PLEASE EMAIL THE TRACKING DATE AND NUMBER IMMEDIATELY(AGAIN. WITHIN THE 3 DAYS OF NOTIFICATION) ITEM SHOULD BE PACKED AND SHIPPED IN THE SAME MANNER IT WAS RECEIVED. WE WILL REFUND YOUR PURCHASE PRICE UPON RECEIPT OF ITEM& CONFIRMATION THAT IT IS IIN THE SAME CONDITION AS WHEN IT WAS SHIPPED.
3" X 2 3/8 "90 DEGREE MACHINIST ANGLE BLOCK/ PLATE
UP FOR AUCTION WE HAVE A 3" X 2 3/8" 90 DEGREE ANGLE BLOCK/ PLATE. THIS USED TOOL IS IN GOOD CONDITION. THE HOLES ARE TAPED THEY ARE 1/4 20 THREAD.THE TWO BLOCK CAN BE TAKEN APART. ANY QUESTIONS PLEASE ASK. THANKS FOR LOOKING. PLEASE VISIT OUR STORE. Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144a01bdb3e-0x117-
MACHINIST PARALLEL SET 1/8" 10 PAIR MISSING ONE OF THE SET (1/2) ¦
MACHINIST PARALLEL SET 1/8" 10 PAIR MISSING ONE OF THE SET(1/2) PLEASE REVIEW PICTURES FOR MORE DETAILS AND INFO ON CONDITION. THE ITEM(S) IN THE PICTURES WILL BE THE ITEM(S) YOU WILL BE RECEIVING. EVERYTHING AND ONLY WHAT IS IN THE PICTURES IS INCLUDED. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL ... moreTRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
(8) MACHINIST PRECISION STEEL SURFACE GRINDING PARALLELS SET .25x.750/1.375x6
Machinist Precision Hardened Steel Surface Grinding Parallels Sets Only includes what is pictured. Please review all the pictures. Four measure.250 x.750 x 6 inches and the other four measure.250 x 1.375 x 6 inches. The centers are 4.5 inches apart. My client used these when he was a toolmaker. But has since changed professions and no longer has a need for them. We tried to take pictures of the important features. But we are not experts on these so feel free to contact if you have any questions. Check out my other items for more items of collectible interest! Free local pickup is available by appointment. You can pay to have it shipped to you. Or we can deliver it to you for $2.00 per mile with a $10.00 minimum charge from Erie. PA 16506. Please call me at 814.882.6830 if you have any questions. We are happy to combine shipping. For international ... morewinning bidders. Including Canada. I will only accept PayPal. Check out my other items for more items of collectible interest. Thank you and Good Luck! Sign up for my weekly email newsletters so you can regularly see what items I have ending that week. Be sure to add me to your favorites list so you can view my items easily in the future. Powered by The free listing tool. List your items fast and easy and manage your active items.
STARRETT 1/8"X1" VINTAGE PARALLELS 2) TOOLMAKER MACHINIST INSPECT GRINDER MILL
PARALLELS OR BLOCKS. STARRETT 384(2) GROUND ALL OVER AS SHOWN! XLNT CLEAN TOOLS. PERFECT FOR YOUR BRIDGEPORT TABLE SET-UPS! STAINED AS SHOWN BUT NO HEAVY MILL,DRILL OR GRIND DAMAGE LIKE MOST! A M E R I C A N BROWN&SHARPE TOOLMAKER MADE. THESE ARE MADE FROM TOOL STEEL AND HARDENED AND PRECISION GROUND. MINOR MARKS AND STAINS FROM USE. DO NOT MISSS THESE WOW! MADE FROM HARDENED TOOL STEEL. PARALLELS OR BLOCKS(2) MEASURE 1/8" 125" THICK X 1" 1.000" TALL X 6" LONG. FACTORY PRECISION GROUND BY STARRETT. ALL OVER IN GREAT USED CONDITION AS SHOWN. GROUND ON ALL 4 SIDES BUT NOT ENDS. ENGRAVED ON END AS SHOWN. PERFECT FOR YOUR BRIDGEPORT OR MOORE MACHINE, WHERE HE USED THESE. MINOR STAINS ALSO BUT SLIDE SMOOTHLY ON OUR SURFACE PLATE! MORE SETS NOW LISTED! BLOCKS WERE KEPT IN A GERSTNER TOOL BOX. RETIRED GM TOOLMAKER FROM ... moreTHE MOORE JIG-GRINDER. EXCELLENT USEFULL BLOCKS FOR SURFACE GRINDER OR BRIDGEPORT LIGHT MILLING WORK. SEE PICS. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for FINAL SELLER BILLING when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes includ
Machinist Set-Up Blocks 8 Piece Lot Lathe Mill Tool Die Metalworking Fabricating
Machinist Set-Up Blocks. Lathe, Mill,Tool Die, Metalworking, Fabricating, 8 Piece Lot. This is for the entire lot of 8 shown. We have described them to the best of our ability so it is up to the experts out there to bid accordingly. DESCRIPTION: 8) Machining Blocks. Includes: 4) 5/8" Blocks. 4"Long. 2) 1/2" Blocks, 4"Long. 1) 1/2" Block, 6"Long. 1) 3/4" Block, 6"Long. 1) 1/2" Hold Down Bolt 7"Long with Nut. A couple of these have light battle scars but overall in good condition. Sizes are Approximate) Free shipping. The pictures on eBay are always the best description, so please make sure you check them out before you buy and if you require more information. Don't hesitate to ask ahead of time. It is our goal to make sure customers are making an informed choice and are satisfied with their ... morepurchase" so please make sure you check them out before you buy and if you require more information. Don't hesitate to ask ahead of time. It is our goal to make sure customers are making an informed choice and are satisfied with their purchase"
20 Pc Yhin Parallel 1/8" X 6" Jig Block Bar Tool Set Machinist Machine Shop
Two of the bars have a little surface rust on them. The set is in good condition. Posted with
Machinist Set-up V Block 6" x 4" x 3 1/8" Good condition. Unique
Fort Sale: Unique machinist set up V block measures 6" x 4" x 3 1/8" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the ... morewinning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PLEASE NOTE: There is a $10 handling fee on all internationally placed o
Bronze & Steel Magnetic Transfer Blocks 6 3/8 L x 3" W x 1 1/4 T Machinist Tool
The Following Item is for sale 2- Bronze& Steel Magnetic Transfer Blocks 1 1/4" thick x 6 3/8" long x 3" wide Machinist Tool. Item is in very good working order and good condition unless otherwise noted. Please email any questions before bidding. Will call is available. Thanks for your interest in this item and Good Luck Bidding! Powered by SixBit's eCommerce Solution
Machinist Workholding V Block 1 7/8" x 1 5/8" x 1 11/16" w/Clamp
This is a Machinist or Toolmakers"V" Block with original Clamp. Top V groove is: 1 1/4" wide x 1" deep. Bottom V groove is: 3/4" wide x 7/8" deep. Ready for use
PARALLELS 2) 5/8 VINTAGE USA AMERICAN TOOLMAKER MACHINIST INSPECT GRINDER MILL
PARALLELS OR BLOCKS(2) FRESH PRECISION GROUND ALL OVER AS SHOWN! XLNT CLEAN TOOLS. PERFECT FOR YOUR BRIDGEPORT TABLE SET-UPS! NO HEAVY MILL,DRILL OR GRIND DAMAGE LIKE MOST! A M E R I C A N TOOLMAKER MADE. DO NOT MISSS THESE WOW! MADE FROM HARDENED TOOL STEEL. FRESH PRECISION GROUND USING HERMANN SCHMIDT VISE FOR EDGES AND HERMANN SCHMIDT 4" MAGNETIC SQUARING BLOCK FOR THE ENDS! GROUND CORRECTLY! PRECISION GROUND CHAMFERS ALSO ADDED AS SHOWN. PARALLELS OR BLOCKS(2) MEASURE 5/8" 620" THICK X 1-1/4" 1.207" TALL X 3-15-16" 3.894" LONG. FRESH PRECISION GROUND ALL OVER IN GREAT USED CONDITION AS SHOWN. GROUND ON ALL 4 SIDES AND ENDS. NAME NEATLY STAMPED IN RECESS BEFORE HEAT-TREAT AND GRINDING AS SHOWN. PERFECT FOR YOUR BRIDGEPORT OR MOORE MACHINE. WHERE HE USED THESE. MORE SETS NOW LISTED! BLOCKS WERE KEPT IN ... moreA GERSTNER TOOL BOX. RETIRED GM TOOLMAKER FROM THE MOORE JIG-GRINDER. EXCELLENT USEFULL BLOCKS FOR SURFACE GRINDER OR BRIDGEPORT LIGHT MILLING WORK. SEE PICS. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for FINAL SELLER BILLING when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you r
STARRETT PARALLELS 3/8 INCH 384 MACHINIST JIG BORE GRINDER MILL GRIND INSPECTION
SUPER NICE SET OF SPECIAL ORDER LIKE NEW IN THE BOX STARRETT 3/8" THICK No. 384 PARALLEL SET( 8 TOTAL PARALLELS FACTORY MATCHED PAIRS) WITH FACTORY CASE. 8 PARALLELS SET. PRECISION GROUND PARALLELS AS SHOWN AND APPEAR TO HAVE BEEN NEVER USED AS SHOWN. I HAD TOP REMOVE PAPER WRAP FROM THIS SET! SOME SMALL STAINS FROM STORAGE BUT NOTHING ELSE ON THEM. NO MILL. DRILL OR GRIND MARKS. THESE ONLY HAVE FACTORY STAMPINGS AND NO OTHER ENGRAVINGS OR EVEN MARKS ON THE CASE! XLNT"XTRA" SET OF PARALLELS IN CASE 479.67 WHEN NEW LIST PRICE ON PAGE 1841 MSC CATALOG! PARALLELS MATCHED MEASURE 3/8" THICK X 1/4" TALL AND 6" LONG. SECOND MATCHED PAIR MEASURES 3/8" THICK X 1/2" TALL AND 6" LONG. THIRD MATCHED PAIR MEASURES 3/8" THICK X 3/4" TALL AND 6" LONG. FOURTH MATCHED PAIR MEASURES 3/8" THICK ... moreX 1" TALL AND 6" LONG. Starrett No. 384 Steel Parallels are hardened and ground to close limits. They are indispensable for inspection and layout work or for various setups on drill presses. Milling and grinding machines, shapers, etc. Furnished in pairs, 6" length, they are made from a special grade of tool steel, hardened and accurately ground on the four sides. In tool rooms or machine shops, several pairs of these parallels will be of great value. THANKS FOR LOOKING! STARRETT 6" SCALE IS NOT INCLUDED. SEE OUR OTHER AUCTIONS FOR MANY MORE NICE TOOLS HAVING JUST PURCHASED MANY.MANY OTHER NICE TOOLS FROM RETIRED TOOLMAKERS. THIS IS A RECENT PURCHASE FROM A RETIRED TOOLMAKER ALONG WITH HIS GERSTNER BOX AND BASE TO BE LISTED SHORTLY. CHECK OUR FEEDBACK AND YOU WILL SEE MANY HAPPY CUSTOMERS! SEE PICS. WHY BUY IMPORT WHEN A M E R I C A N TOOLING THE BEST IS HERE! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me
Machinist 1 7/8' x 1 3/4" x 1 7/16" V Block w/Clamp
Nice Machinist or Toolmakers"V" Block with Clamp. Block is 1 7/8" x 1 3/4" x 1 7/16" V Groove is 7/8" wide x 1/2" deep, Small Groove is 7/16" wide x 1/4" deep, Perfect condition, see scans, RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-1456d04a516-0x105-
Machinist Tapped Set-Up Block 5 3/16 X 3 7/8 X 3 1/4
This is a tapped set-up block for a machinist. Measures 5 3/16 X 3 7/8 X 3 1/4. This is in very good condition. Ask any questions.
Vintage Pair of Machinist V Blocks with Clamps Lathe Grinding Tool 2 1/4"x1 7/8"
Vintage Pair of Machinist V Blocks with Clamps. Blocks are 2 1/4" long and 1 7/8" wide and deep. V groove appears to be 7/8" deep. Each block weighs 1 lb 8 oz. 2 clamps- 1 has 2 1/4" threads. Other has 2" threads. Both turn freely with no play. Not familiar with these tools- cleaning out toolboxes. Please ask any questions. Additional photos gladly provided. No maker stamps that I can find. These appear to be made from quality stainless steel. Flat Rate shipping of $7.00 to US only. Thanks for looking! Please check our other machinist tool listings. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
MASSIVE!! 4,6,8 MACHINIST PRECISION SET UP BLOCKS 4" X 6" X 8"
Pair of Massive Precision Set Up Blocks Measure 4" x 6" x 8" 5/8"11 Tapped Holes No Reserve! Check my other auctions for mor e quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
Machinist Holding/Grinding Block 2 1/16 X 2 5/8 X 2 5/8
This is a holding/grinding block for a machinist. Measures 2 1/16 X 2 5/8 X 2 5/8. This is in good condition. Ask any questions.
2 Machinist V Blocks, 8 Parallel Clamps, Clamping Block & BMP Drill Jig Bushing
This listing is for a lot of machinist tools. They are all used and have been in the bottom of my tool box for over 20 years. The parallel clamps are in fair to good condition. One has a crack in the jaw at the front screw. See the close up photo, and one needs one of the threads chased. There are Two 2.25" clamps, there are Four 4" Clamps, there is One 3.5" clamp marked Union Tool Co, and One 3" clamp marked#161 C LS Starrett. Only 2 of the clamps have maker's marks. They all work and would be useful if you need something clamped. The 2 V-Blocks had a bit of surface rust that I cleaned off and they are quite useable as they are. They are 1.5" wide by 2.375" wide and 1.935" tall. The clamp block is in nice shape and quite useable as is. It is 5" long, 2.25" wide, and 1.625" tall. There ... moreare 5 pin positions for the clamping head to be located to give a 2" clamp width. The BMP Bushing is a 3/8 ID and new in the package. Look the photos over and ask questions before you buy. Shipping will be via Priotity Flat Rate in a Medium Box unless you live close enough to pick it up in South Florida.
Lot 8 Vintage Machinist Toolmaker Jig Boring Bar Blocks Square, Oval & Rectangle
Lot 8 Vintage Machinist Toolmaker Jig Boring Bar Blocks Square. Oval& Rectangle. Item: Lot of eight total vintage machinist toolmaker jig boring bar block tool/workholders including: Square blocks(x4) each with a 1/4" drill hole Rectangles(x2) with cylindrical shaped holes that are 1" long x 5/16" wide Ovals(x2) each with two 5/16" drill holes Condition: Good overall cosmetic condition. Light wear/light to moderate rusting but all holes look clean with good threading Additional Item Info: These are expensive bit holders. Ideal for use at a fraction of original retail cost Please see photos for closer details and if you have any additional questions please feel free to ask Thanks for viewing! MK 4-24-14 Please Read First: Any item sold over $100 will automatically be insured. USA BIDS ONLY. And no bids from Canada please ... morePaypal users must be verified with CONFIRMED address NO BIDS from zero feedback Will not ship to P.O. boxes. I always return feedback to winning bidder. Winner must pay within 3 days of auctions end or an automatic case will be opened on the 4th day. Please ask all questions BEFORE bidding. Payment: Payment should be made within 3 days after the auction ends. Contact us if you are not able to and we will work with you. Shipping: Almost all of our items are shipped at the USPS Parcel Post. If we use UPS or any other postal carrier we will make note of that in our listings. Terms of sale: All of our items are sold as is. In the description and the pictures I do my best to include any wear or damage to the item. Do not hesitate to ask questions. If for some reason you have a problem please contact me before opening a case. I do not claim to be an expert on any of the items that I sell. I do the best research I can and represent the item(s) as clearly and honestly as possible. If you have any questions or concerns regarding compatibility or specific technical specifications. I will do our best to answer them. Please do your own research and make sure you know what you are buyin
Machinist Magnetic V Block 2-3/8" x 2" x 1-7/8"
As shown in good condition. No makers mark or owner markings. Measures 2-3/8" overall length. 1-7/8" width, and 2" height. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-145dbd56199-0x109-
Machinist Grinding/ Set-Up Block 3 1/8 X 3 X 2 3/4
This is a grinding/set-up block for a machinist. Measures 3 1/8 X 3 X 2 3/4. This is in good condition. Ask any questions.
Machinist setup V Block 3 1/4" x 2" x 7/8" deep Great condition.
For Sale: Machinist setup V block measures 3 1/4" x 2" and 7/8" deep. Block is in great condition and measures 2" tall Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate ... morerequired. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PLEASE NOTE: Ther
Help