|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$10.99 Shipping Condition: Used Location: Athol, United States Nice condition, see photos. Signs of use. All just under 3" long. Six pairs of precision parallels.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States BRAND NEW Steel V Blocks With Clamp Set 1-5/8 x 1-1/4 x 1-1/4 90 Degrees Angle V-Blocks Made Of Tool Steel, Hardened And Precision Ground Chrome Steel ... moreSquare, Parallel And Concentric Maximum Diameter Of Bar: 1'' Completed With Wooden Box Unit Weight: 2 Lbs Quantity: 1 Brand turitrade MPN TR33140 Block Type V-Block Shape V Block Degree 90 Block Material Hardened Steel UPC Does not apply.
Buy It Now
$122.20 Shipping Condition: Used Location: Medina, United States Id; 1ea T&P 9162 Shelf 2/6.
Buy It Now
$15.00 Shipping Condition: Used Location: Sheffield, United States TOOLMAKER MADE 1"-2'-3" BLOCKS OWNED BY USA TOOLMAKER. MADE OF HARDENED AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS, MACHINIST AND TOOLMAKERS ... moreALIKE. BLOCKS ARE STAMPED ON THE END IN A RECESS BEFORE HEAT-TREAT AND GRINDING.
Buy It Now
$8.00 Shipping Condition: Used Location: Sheffield, United States THIN GAGES OR PARALLELS (4). 30 , 34 ,12 AND 45 SPECIALTY DESIGN TRIANGLES IN EXCELLENT USED CONDITION AS SHOWN. THESE TRIANGLES ARE THIN 5/64" AND ABOUT ... more1-7/8" LONG AND 1-1/2" TALL WITH A KEYWAY IN BOTTOM,1/4" WIDE X 7/32" DEEP.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Brand New V Block Clamp Set Multi-use Gauge Gage Machinist Tool Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min.: 13/64" Capacity Max: 1-3/16" ... moreV-Blocks Are 90 Accuracy: 0.0002" All Sides Ground Square And Parallel To Each Other "V" Are Ground Central,Parallel And Square To The Ends Made Of Hardened And Ground Chrome Steel Wooden Storage Case Included Weight: 5 Lbs Overall Wooden Storage Case Small Freight Item Package Including： High Quanlity 2-3/8 X 2-3/8 X 2" Ultra Precision V-block & Clamp Set .
Buy It Now
$9.50 Shipping Condition: Used Location: Dearborn Heights, United States This block is used. You can see the condition in the photos. We will send a new invoice each evening. Weight: 2-1/2 lbs.
Buy It Now
$15.00 Shipping Condition: Used Location: Lewis Center, United States They are all 2" x 1" x 12". One black has a chip. The other blocks have marks/writing on them. We will be more than happy to get back with you as soon ... moreas possible!
Buy It Now
Condition: Used Location: Middlebury, United States Machine Finish. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Weight (lbs, oz): 370. Need it urgently?. Call ... moreus and we will do what we can to get it to you quickly.
Buy It Now
$15.00 Shipping Condition: Used Location: Sheffield, United States TOOLMAKER MADE 1"2'3" BLOCKS WITH STAMPED NAME IN RECESS. 1MATCHED SET OF 3 ALL GROUND TOGETHER) OWNED BY TOOLMAKER MADE OF HARDENED AND ... morePRECISION GROUND TOOL STEEL USED BY WATCHMAKERS. MACHINIST AND TOOLMAKERS ALIKE. THESE ARE VERY ACCURATE BLOCKS FOR INSPECTION OR GRINDING AS NEEDED. BLOCKS ARE IN EXCELLENT CONDITION HAVING BEEN ORIGINALLY GROUND USING A HERMANN SCHMIDT SQUARING BLOCK AND MAGNA-SINE ON A BALLWAY SURFACE GRINDER IN. BLOCKS MEASURES 2.0000" WIDE X 2.9990" TALL AND 1.0002" THICK WITH(2) 3/4" BLIND DRILLED HOLES IN THE 3" LENGTH AS SHOWN. AS SHOWN IN EXCELLENT USED CONDITION! ALL HAVE MINOR STAINING FROM LONG TERM STORAGE IN HIS GERSTNER TOOLBOX! HIS SET OF 4 ARE LISTED AS ARE A SET OF 6 AND SET OF 8 SOON! WHAT MORE CAN I SAY ONLY THE MOORE 1"2"3" OR HERMANN SCHMIDTS 1"2"3" WE HAVE LISTED ARE AS NICE AS THESE! EXCELLENT USEFULL BLOCKS FOR SURFACE GRINDER OR BRIDGEPORT LIGHT MILLING WORK. WE HAVE BLOCKS JUST LIKE THESE ON A JIG-GRINDER AND EDM. THEY WORK VERY WELL. SEE PICS. HERMANN SCHMIDT 1"2"3" BLOCK'S WHEN AVAILABLE IN 2005 WERE $970 FOR A MATCHED SET OF 6 LIKE THESE! SAVE SOME $$ HERE! ONLY OUR MOORE TOOLS 1"2"3" ARE AS NICE AS THESE! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SH
Buy It Now
$18.50 Shipping Condition: Used Location: Sheffield, United States LARGER TOOLMAKER MADE V-BLOCK AS SHOWN. 1-2-3 BLOCKS ARE MADE OF HARDENED AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS, MACHINIST AND TOOLMAKERS ... moreALIKE. 1.015" X 2.02" X 3.006" BLOCKS AS SHOWN.
Buy It Now
$15.00 Shipping Condition: Used Location: Sheffield, United States ALL OWNED AND MADE BY A USA TOOLMAKER. MADE OF HARDENED AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS, MACHINIST AND TOOLMAKERS ALIKE. 2, PARALLELS ... moreFRESH GROUND AS SHOWN. 5/16"X 1.008" X 2.44" LONG.
Buy It Now
$28.00 Shipping Condition: Used Location: Sheffield, United States TOOLMAKER MADE VERSION OF THE Hermann Schmidt ,UCV v-block (1) and clamp (1). New solution for an old problem. Grind four sides of a punch without clamping. ... moreUnique internal clamp permits V Block to be used on all sides.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product description Length: 2-3/8" Width: 2-3/4 Height: 2" Capacity: 2" round, 1-7/16" square Product features Stepped grove construction permits low ... moreor high clamping Hardened steel All squares precision ground parallel and square Sold in matched pairs UPC Does not apply Brand autoooparts MPN APO188928 Block Type V-Block Shape V Block Block Material Steel.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： 6 Pcs Adjustable Parallel Sets Minimum Measuring Range (Inch): 3/8'' Maximum Measuring Range: 2-1/4'' Length Range From : 1-3/4" to 5" Closed ... moreHeight Range: 3/8" to 1/2", 1/2" to 11/16", 11/16" to 15/16", 15/16" to 1-5/16", 1-5/16" to 1-3/4", 1-3/4" to 2-1/4" Quickly Adjustable And Locked With Screws For Micrometer Applications:For layout, inspection, shop work, set-up, etc. Package List: 6Pcs Adjustable Parallel Set 3/8" - 2-1/4" High Precision US .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Brand New V Block Clamp Set Multi-use Gauge Gage Machinist Tool Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min.: 13/64" Capacity Max: 1-3/16" V-Blocks Are ... more90 Accuracy: 0.0002" All Sides Ground Square And Parallel To Each Other "V" Are Ground Central,Parallel And Square To The Ends Made Of Hardened And Ground Chrome Steel Wooden Storage Case Included Weight: 5 Lbs Overall Wooden Storage Case Quantity: 1 Small Freight Item Brand ALL-CARB MPN Does Not Apply Warranty 1 year Instrument Type Gage Block Block Material Hardened Ground Steel Block Type V-Block.
Buy It Now
$99.00 Shipping Condition: Used Location: Unionville, United States This Challenge Heavy Duty Right Angle Block Plate measures 12" x 10" x 8" and weighs approximately 66.6 lbs. It is used. And in very good ... morecondition. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. You are welcome to pick up your items with an appointment with no additional charges. Skidding charges will still apply. NO PAYPAL FOR WILL CALLED ITEMS Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Wi
Buy It Now
$18.50 Shipping Condition: Used Location: Dearborn Heights, United States If you're interested, you can take a look. These blocks are used. You can see this in the photos. We will send a new invoice each evening. ONLY ONE BLOCK ... moreHAS A CLAMP.
Buy It Now
$15.00 Shipping Condition: Used Location: Sheffield, United States TOOLMAKER MADE 1"-2'-3" BLOCKS OWNED BY USA TOOLMAKER. MADE OF HARDENED AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS, MACHINIST AND TOOLMAKERS ... moreALIKE.994" X 2.001" X 3.004" BLOCKS AS SHOWN.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States 1/2 to 1-1/2" 9 Pair Wavy Parallel Set Used for the precision clamping of parts in drilling, boring, milling, grinding, assembly work, etc. Can readily ... morebe used as elastic shims. Made of high quality spring steel that has been hardened, stress relieved and precision ground.
Buy It Now
$15.00 Shipping Condition: Used Location: Erie, United States Pair of tool steel setup machinist angle blocks 12 1/2 degree.
Buy It Now
$12.00 Shipping Condition: Used Location: Manton, United States For sale are steel parallel bars with one wooden block holder. The lengths ate 18", 16", 13" and 12". The 16" is the one with the handle. These are in ... moregreat condition. NO PO OR APO BOXES.
Buy It Now
$18.50 Shipping Condition: Used Location: Sheffield, United States SNAP HINGE IS INTACT AND WORKS. VERY HARD TO FIND 7/64" (.102") THIN STYLE AND VERY HANDY TO HAVE FOR GRINDING NON-FERROUS MATERIALS ON YOUR SURFACE GRINDER! ... moreSTARRETT 6" SCALE IS NOT INCLUDED. THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK!
Buy It Now
$15.00 Shipping Condition: Seller refurbished Location: Sheffield, United States USA A M E R I C A N LUFKIN RULE CO. TOOLMAKER MADE. (1) 5/8" WIDE X 3-1/2" TALL X 5" LONG PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN. 5/8" ... moreWIDE X 5" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States 4 Pair 3/16" - 1/2" x 6" parallel set. Portable Power Station. Includes 6 Feelers: 4", 8", 12" Straight 4", 8", 12" Curved. Hand Tools. Add to Favourites. ... moreDate First Available: July 13, 2022. To be used in setting up work for drilling and milling.
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States Contents Include Made Of High Quality Steel, Durable. Thickness Of The Spring Steel 0.3mm.
Buy It Now
$25.00 Shipping Condition: Used Location: Sheffield, United States NO LOGO ON THE PARALLELS THEMSELVES. STARRETT 6" SCALE IS NOT INCLUDED. PHONE NUMBER will then be displayed. WHY BUY IMPORT WHEN A M E R I C A N TOOLING ... moreTHE BEST IS HERE !
Buy It Now
$15.00 Shipping Condition: Seller refurbished Location: Sheffield, United States USA A M E R I C A N LUFKIN RULE CO. TOOLMAKER MADE. (1) 5/8" WIDE X 3-1/2" TALL X 5" LONG PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN. 5/8" ... moreWIDE X 5" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Brand New V Block Clamp Set Multi-use Gauge Gage Machinist Tool Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min.: 13/64" Capacity Max: 1-3/16" ... moreV-Blocks Are 90 Accuracy: 0.0002" All Sides Ground Square And Parallel To Each Other "V" Are Ground Central,Parallel And Square To The Ends Made Of Hardened And Ground Chrome Steel Wooden Storage Case Included Weight: 5 Lbs Overall Wooden Storage Case Quantity: 1 Brand Thomletha MPN GM662760 Block Type V Block Instrument Type Gage Block Block Material Hardened Ground Steel UPC Does not apply.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product description: Length: 2-3/8" Width: 2-3/4 Height: 2" Capacity: 2" round, 1-7/16" square Product features: Stepped grove construction permits low ... moreor high clamping. Hardened steel. All squares precision ground parallel and square. Sold in matched pairs. UPC Does not apply Brand Thomletha MPN GM944640 Block Type V-Block Shape V Block Block Material Steel.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Brand New V Block Clamp Set Multi-use Gauge Gage Machinist Tool Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min.: 13/64" Capacity Max: 1-3/16" V-Blocks Are ... more90 Accuracy: 0.0002" All Sides Ground Square And Parallel To Each Other "V" Are Ground Central,Parallel And Square To The Ends Made Of Hardened And Ground Chrome Steel Wooden Storage Case Included Weight: 5 Lbs Overall Wooden Storage Case Quantity: 1 Small Freight Item.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 2-3/8' x 2-3/8' x 2' V Block Clamp Set Descriptions: Brand New V block clamp set Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min. 13/64" ... moreCapacity Max: 1-3/16" V-Blocks are 90 All sides ground square and parallel to each other"V" are ground central. Parallel and square to the ends Made of hardened and ground chrome steel Wooden storage case INCLUDED Wooden storage case dimension: 3-1/2'L x 6-1/4'W x 3-1/2' Shipping Weight: 5 lbs Quantity: 1 Free shipping HAWAII(HI) ALASKA(AK) and PO Box. We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* sales tax will be added at check out. Shipping and Handling to States: FREE SHIPPING(Excludes: APO. GU, PR, VI) HAWAII(HI) ALASKA(AK) and PO Box OKAY! Additional shipping charge applies to APO. GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $50.00(1st unit) + $25.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received within 7 days or a Non Paying Bidder Alert will be filed. Return Policy: In-Order for us to Provide FREE SHIPPING. All Returns Are Subject to a 15% Restocking. Buye
Buy It Now
$15.00 Shipping Condition: Used Location: Sheffield, United States BORING BAR AND(9) NEW INSERTS KC 810 TPG 221 AS SHOWN. 1 INSERT INSTALLED) KENNAMETAL S08 STUN R2 NE3 $325 EACH NEW! INSERTS ARE ABOUT $12- $15 EACH FOR ... moreYOUR LATHE OR AS NEEDED. LOOKS TO HAVE BEEN USED VERY LITTLE DOES HAVE LIGHT SET-SCREW MARKS ON SHANK BUT HARDLY ANY PAINT LOSS ON INSERT END OF BAR! CURRENT LIST PRICE IS OVER $125 EACH FOR BORING BAR ALONE! SAVE SOME $$ HERE! THANKS FOR LOOKING MANY MORE ITEMS LISTED AND MANY ON SALE! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for FINAL SELLER BILLINGwhen done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us. In the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. CHECK OUR STORE FOR MANY MORE NICE HARD TO FIND TOOLMAKER ITEMS.INCLUDING OPTICAL RADIUS DRESSERS, J&S RADIUS DRESSERS, VISES AND PARALLEL SETS, MATCHED PAIRS OF ANGLE PLATES,VISES, VBLOCKS AND MANY OTHER HARD TO LOCATE ITEMS. WE HAVE MANY WELL MADE TOOLS LISTED AT AUCTION AND MANY MORE IN OUR STORE. PLEASE TAKE A MOMENT TO LOOK. THANKS. ALL TOOLS WERE STORED IN A GERSTNER BOX AND BASE SOON TO BE LISTED IN OUR STORE. SEE PICS. SEE OUR STORE! STARRETT 6" SCALE IS NOT INCLUDED. F
Buy It Now
$15.00 Shipping Condition: Seller refurbished Location: Sheffield, United States USA A M E R I C A N LUFKIN RULE CO. TOOLMAKER MADE. (1) 5/8" WIDE X 3-1/2" TALL X 5" LONG PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN. 5/8" ... moreWIDE X 5" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN.
Buy It Now
$19.50 Shipping Condition: Used Location: Sheffield, United States FLAT ANGLE GAGE BLOCKS. 12 TOTAL BLOCKS HERE AS SHOWN. EVERY BLOCK IS STAMPED WITH ANGLE AND INITIALS AS SHOWN. I HAVE SEVERAL SETS OF HIS BLOCKS AND ... morePARALLELS ON NOW ALL ARE EXCELLENT! TRIANGLES 1/2 , 1 , 2 3 , 4 , 5 , 1 0 , 15 , 20 ,25 , 30 , 45 .
Buy It Now
$15.00 Shipping Condition: Used Location: Sheffield, United States 5/8" WIDE X 5" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N BROWN&SHARPE. TOOLMAKER MADE. PLANER GAGE AS SHOWN. SLIDE IS ... moreSILKY SMOOTH, AND APPEARS TO BE MADE SIMILAR TO OUR PRATT & WHITNEY UNIVERSAL PLANER GAGES ALSO SOLD HERE.
Buy It Now
$12.00 Shipping Condition: Used Location: Manton, United States For sale are aluminum parallel bars with wooden block holders. The lengths are 16", 14 1/2", 12 1/2", 91/2" and 5 1/2". These are in great condition. ... moreNO PO OR APO BOXES.
Buy It Now
$9.00 Shipping Condition: Used Location: Erie, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States BRAND NEW Steel V Blocks With Clamp Set 1-5/8 × 1-1/4 × 1-1/4 90 Degrees Angle V-Blocks Made Of Tool Steel, Hardened And Precision Ground Chrome Steel ... moreSquare, Parallel And Concentric Maximum Diameter Of Bar: 1'' Completed With Wooden Box Unit Weight: 2 Lbs Quantity: 1 Brand Thomletha MPN GM662800 Block Type V-Block Shape V Block Degree 90 Block Material Hardened Steel UPC Does not apply.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： 1/8 × 3" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight ... moretolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support. Description： Made from fine quality tool steel that is stress relieved against distortion. Precision ground and hardened..
Buy It Now
$24.88 Shipping Condition: Used Location: Coffeyville, United States APPROXIMATE WEIGHT: 5.2 LBS. SET RANGES FROM 0.050"- 4.000".
Buy It Now
$15.00 Shipping Condition: Seller refurbished Location: Sheffield, United States USA A M E R I C A N LUFKIN RULE CO. TOOLMAKER MADE. (1) 5/8" WIDE X 3-1/2" TALL X 5" LONG PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN. 5/8" ... moreWIDE X 5" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN.
Buy It Now
$15.00 Shipping Condition: Used Location: Sheffield, United States TRIANGLES OR ANGLE GAGE BLOCKS(2) 45-45-90 DEGREE AND A 30-60-90 DEGREE ANGLE GAGE BLOCKS AS SHOWN IN EXCELLENT USED CONDITION. BOTH PRECISION GROUND ... moreAS SHOWN USING NEW HERMANN SCHMIDT TOOLING! THESE ARE USED BY TOOLMAKERS AND MACHINISTS ALIKE FOR PRECISE MACHINING OR GRINDING OR INSPECTION OR EVEN A QUCIK SLIDE DRESS OF AN ANGLE ON GRINDING WHEEL! BOTH ARE IN EXCELLENT USED CONDITION WITH INITIALS STAMPED IN A RECESS AS SHOWN! SMALL OIL STAINS REMAIN ON TOOLS. YES THEY ARE HARD! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! 45-45- 90 DEGREE FLAT ANGLE GAGE BLOCK MEASURES.247" THICK x 2.020" TALL x 2.020" TALL. BLOCK HAS"INITIALS" STAMPED NEATLY AS SHOWN PRIOR TO HEAT-TREAT AND GRINDING PROCESSES. 30-60- 90 DEGREE TRIANGLE MEASURES.247" THICK X 1.172" TALL AND IS 2.009" LONG. BLOCK HAS INITIALS STAMPED NEATLY AS SHOWN. A GREAT SET AND ONLY OTHER SET AS NICE ON EBAY IS HERE IN OUR STORE! SEE PICS. SAVE SOME $$ HERE ON THESE VERY NICE USED BLOCKS. MANY MANY OTHER V-BLOCKS IN MY STORE AND AT AUCTION. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING
Buy It Now
Free Shipping Condition: New Location: United States #74 in Gage Blocks.
Buy It Now
$18.50 Shipping Condition: Used Location: Sheffield, United States NO LOGO ON THE PARALLELS THEMSELVES. - Balls: Grade 200 Carbon Steel. Load capacity per ball: 3,000 lbs. - Plate: 1018 Steel. Black oxide finish on plate. ... moreSTARRETT 6" SCALE IS NOT INCLUDED. PHONE NUMBER will then be displayed.
Buy It Now
$25.00 Shipping Condition: Used Location: Sheffield, United States 3/4" WIDE X 5-1/4" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N TOOLMAKER OWNED (1) 3/4" WIDE X 5-1/4" LONG FACTORY PRECISION ... moreGROUND AND IN GREAT USED CONDITION AS SHOWN.
Buy It Now
$15.00 Shipping Condition: Seller refurbished Location: Sheffield, United States USA A M E R I C A N LUFKIN RULE CO. TOOLMAKER MADE. (1) 5/8" WIDE X 3-1/2" TALL X 5" LONG PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN. 5/8" ... moreWIDE X 5" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN.
Buy It Now
$18.50 Shipping Condition: Used Location: Sheffield, United States MAG-NA-HOLDS MHD-5 5" SUBURBAN TOOL Co, USED IN A VISE TO HOLD IRREGULAR PARTS FOR MILLING OR GRINDING AS NEEDED. SOLD BY SUBURBAN TOOL Co. MADE OF HARDENED ... moreSTEEL AND PRECISION GROUND. THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK!
Buy It Now
Free Shipping Condition: New Location: United States VISIT OUR STORE YOU MAY ALSO BE INTERESTED IN: 4 pc#1 CENTER DRILL COUNTERSINK SET 24" Professional Super High Precision Electronic Caliper 2x 3/8" ... moreDiamond Drill Bit Ceramic Tile Glass Granite Porcelain Core Hole Saw IP65 Fluid Resistant DIGITAL ELECTRONIC/ ANALOG VERNIER MICROMETER 0-1" Disc Brake Digital Micrometer Extended Range Engine Lifting Set- Sling& plate 10 pc 4 and 2 FLUTE Titanium END MILL ENDMILL Set Professional 14 Hex Drive Sockets For Automotive& Home Repair DIGITAL ELECTRONIC INDICATOR 1" Travel 10 pc 4 FLUTE Titanium END MILL Set 9 Pair WAVY STEEL PARALLEL SET Machinist Tool 0.0002" BRAND NEW* IN STOCK* Available For Immediate Shipping Click Small Images to Enlarge Click Small Images to Enlarge Professional Grade Precision Tool For precision clamping of parts in drilling. Boring, milling, grinding, assembly work. Made of hardened spring steel. Features: Hardened spring steel Thin and fragile workpieces can be secured without damage 9 pairs: 1/2 to 1-1/12 in 1/8" steps Height and Parallelism to.0002" page for Deal of The Week Important Information Shipping: WE SHIP FASTER and SAFER THAN MOST SELLERS! We stock all available items. And we ship from our warehouses. We never use drop shipping. Most orders are shipped the same or next business day after payment received. Shipping to anywhere in the contiguous United States is FREE. We ship with UPS ground to physical addresses or with the US Postal Service. Some items may be shipped to PO Boxes. Please inquire before bidding. Please inquire before buying/bidding for shipping to AK. HI, PR, VI, GU, MP, APO/FPO or PO Box with city, state and zip code. Rate may be higher or shipping is not available at all. International shipping is not available. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 5 days of auction clo
Buy It Now
$9.00 Shipping Condition: Used Location: Manton, United States For sale are two Machinist/ tool and die set up blocks. They have 13 holes. These are in great condition. NO PO OR APO BOXES.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 9 Pair Wavy Parallel Set We value our customers and products like we value our photos in our ad. Thank you. Descriptions: Brand New 9 Pair parallel wavy ... moreset 9 pairs: 1/2 to 1-1/12 in 1/8" steps, contents include: 2) 1/2' 2) 5/8' 2) 3/4' 2) 7/8' 2) 1' 2) 1-1/8' 2) 1-1/4' 2) 1-3/8' 2) 1-1/2' Height and Parallelism to.0002" For precision clamping of parts in drilling. Boring, milling, grinding, assembly work, Use to clamp a group of flat parts. Also use to hold fragile or delicate parts, Hardened spring steel, Wooden case INCLUDED, Weight: 95lb(roughly) Case overall dimension: 5-1/4'L x 6-1/4'W x 2-1/8'H Quantity: 1 We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* 9.25% sales tax will be added at check out. Shipping and Handling to Lower 48 States: FREE SHIPPING Ground Service. Excluding PO BOX. APO, HI, AK, PR and GU. Additional shipping charge applies to APO. AK, HI, GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $ 28.00(1st unit) + $ 14.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received withi
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Brand New V Block Clamp Set Multi-use Gauge Gage Machinist Tool Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min.: 13/64" Capacity Max: 1-3/16" V-Blocks Are ... more90 Accuracy: 0.0002" All Sides Ground Square And Parallel To Each Other "V" Are Ground Central,Parallel And Square To The Ends Made Of Hardened And Ground Chrome Steel Wooden Storage Case Included Weight: 5 Lbs Overall Wooden Storage Case Quantity: 1 Small Freight Item.
Buy It Now
$18.50 Shipping Condition: Used Location: Sheffield, United States BROWN&SHARPE IS ON THE CASE ONLY. Overall good condition with signs of age and use. SNAP HINGE IS INTACT AND WORKS. VERY HARD TO FIND 7/64" (.099") THIN ... moreSTYLE AND VERY HANDY TO HAVE FOR GRINDING NON-FERROUS MATERIALS ON YOUR SURFACE GRINDER!
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description： -Brand New -V Block Clamp Set Multi-Use Gauge Gage Machinist Tool -Block Size: 2-3/8 X 2-3/8 X 2" -Diameter Min.: 13/64" -Capacity Max: 1-3/16" ... more-V-Blocks Are 90 -Accuracy: 0.0002" -All Sides Ground Square And Parallel To Each Other -"V" Are Ground Central,Parallel And Square To The Ends -Made Of Hardened And Ground Chrome Steel -Wooden Storage Case Included -Weight: 5 Lbs -Overall Wooden Storage Case -Quantity: 1 -Small Freight Item Package Include： 1*V Block & Clamp W/o Product Instruction Notes：.
Buy It Now
$25.00 Shipping Condition: Used Location: Sheffield, United States 3/4" WIDE X 5-1/4" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N TOOLMAKER OWNED (1) 3/4" WIDE X 5-1/4" LONG FACTORY PRECISION ... moreGROUND AND IN GREAT USED CONDITION AS SHOWN.
Buy It Now
$18.00 Shipping Condition: Used Location: Sheffield, United States STARRETT 271C V-BLOCK SET AS SHOWN. V-BLOCKS (2) AND (1) CLAMP AS SHOWN. THEY HAVE THE NUMBER ON OTHER SIDE TO DENOTE A MATCHED PAIR. NEED TO SEE MORE ... moreJUST ASK FOR MORE PICTURES. STARRETT 6" SCALE IS NOT INCLUDED.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： 1/8 X 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight ... moretolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support..
Buy It Now
$25.00 Shipping Condition: Used Location: Sheffield, United States 3/4" WIDE X 5-1/4" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N TOOLMAKER OWNED (1) 3/4" WIDE X 5-1/4" LONG FACTORY PRECISION ... moreGROUND AND IN GREAT USED CONDITION AS SHOWN.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Steel Parallel Set 9 Pair 1/4 inch Thick 6 inch Long 0.0002 inch Precision Plastic Case Dimension: 7 in L x 8-1/2 in W x 2-1/2 in H *Rough Estimation* ... moreWeight: 9-3/4 Pounds *Rough Estimation* Accuracy (inch): 0.0002 Thickness (inch): 1/4 Length (inch): 6 Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service Quality Assurance For Your Peace Of Mind Package Including： 1 Pair of 3/4 X 6 X 1/4" inch 1 Pair of 7/8 X 6 X 1/4 inch 1 Pair of 1 X 6 X 1/4 inch 1 Pair of 1-1/8 X 6 X 1-4 inch.
Buy It Now
$24.57 Shipping Condition: Used Location: Middlebury, United States Prefer to pick it up yourself?. Will there be a dock or forklift. To get a freight quote we will need to know the following Size: Length: 5 in. Width: ... more8 in. Height: 12 in. Weight (lbs, oz): 8. Need it urgently?.
|
|
|
|
ANTON FLAT ANGLE GAGE BLOCKS 12 1/4*TO30* MACHINIST TOOLMAKER INSPECTION GRIND!!
ANTON FLAT ANGLE GAGE BLOCKS. 12 TOTAL BLOCKS HERE IN ORIGINAL WOODEN CASE AS SHOWN. EVERY BLOCK IS ELECTRO-ETCHED" ANTON MACH. WKS BKLYN NY" PLUS THE ANGLE DEGREE AND INITIALS ON EACH ONE AS SHOWN. 1/4* DEGREE LOOKS TO BE REPLACED WITH A SUBURBAN TOOL Co. BLOCK SINCE IT IS THINNER THAN THE OTHER 11 ARE. ITIS MARKED MADE IN THE USA BUT IS NOT MARKED"ANTON" 1/4* BLOCK COULD ALSO POSSIBLY COULD BE A"MADE IN THE USA" SPI BLOCK ALSO BUT IS NOT MARKED OTHER THAN"MADE IN THE USA" THIS SET IS A USED BUT NICE AND CLEAN! INCLUDED ARE NO MILL.DRILL OR GRIND DAMAGE ON THESE BEAUTYS! LOOK CLOSELY AT ALL THE SUPER-SIZE PICTURES! I HAVE SEVERAL SETS OF HIS BLOCKS AND PARALLELS ON NOW ALL ARE EXCELLENT! TRIANGLES 1/4* 1/2* 1* 2* 3* 4* 5* 1 0* 15* 20* 25* 30* DEGREES. TRIANGLES MEASURE.29" THICK x 1.973" ... moreTALL x 2.980" LONG FOR THE 30-60-90 DEGREE TRI-ANGLE. SUPER NICE USED SET IN EXCELLENT USED CONDITION. ALL ANGLES HAVE ANGLES NEATLY ELECTRO-ETCHED INTO THEM AFTER HEAT-TREAT AND GRIND PROCESSES AS SHOWN. WE REGULARLY USE THESE UP AGAINST AN ANGLE PLATE TO SLIDE DRESS ANGLES ON GRINDING WHEELS. SAVES WEAR AND TEAR ON YOUR HERMANN SCHMIDT RADIUS DRESSERS OR J&S RADIUS DRESSERS OR WHATEVER TYPE YOU DO USE. THANKS FOR LOOKING! IN MY STORE YOU WILL FIND"MATCHED" SETS OF BROWN&SHARPE 750A'S. STARRETT No. 278'S, LUFKIN 905'S. ALL ABOUT THIS SIZE 1-1/4"X1-1/4"X1-5/8" NOT TO MENTION THE LARGER STARRETT 568'S, BROWN&SHARPE 750'S, PRATT& WHITNEY BLOCKS, AND SOON LUFKIN 906'S ALL AGAIN ABOUT THE SAME SIZE 2-1/2" X 2-1/2" X 2-3/4" I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending wit
|
|
|
LATHE MILL MACHINIST LOT TOOLS 2 - 1" x 3" x 12" Hardened Steel Parallel Block s
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. A
|
|
|
MACHINIST TOOL 12 PAIR PARALLEL BLOCK BLOCKS SET WORKHOLDING GRINDING
Up for sale is a set of 10 pair of machinist parallels and two extra pairs that were not part of the set. Top missing on wooden box. The tools are in nice shape. One has a small grind(see closeup) and some have previous owners name engraved. Check the pictures, what you see is what you will receive. Please see my other auctions for more machinist tools. Thanks, any questions, feel free. Buyer to pay shipping and handling charges.PAYMENTS MUST BE RECEIVED WITHIN 5 DAYS OF AUCTION END DATE! SHIPPING INFORMATION: Should this auction be open to international shipments, buyer is responsible for customs clearance and any duty, local taxes or fees. These are normally charged directly by shipping company and are not part of my shipping quotes. I ship International Priority ONLY. First Class International does not have tracking, so I DO NOT send First ... moreClass International. If you are not OK with this, DO NOT bid please. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
TAFT-PEIRCE PARALLELS 1" X 2" X 12" PRECISE GRIND MACHINIST TOOLMAKER Jewler
1"x2"x12" Parallel Bars nice vintage set Taft Peirce Stamped Made in USA They have some small nics on edge check all pics for condition very heavy around 12lbs for pair I have other listed so Check out my! Be sure to add me to your!
|
|
|
2 V BLOCKS MACHINIST TOOLS GRINDING MILLNG WORK HOLDING *12
2 V BLOCKS MACHINIST TOOLS GRINDING MILLNG WORK HOLDING*12 Info/Sizes: Sizes- 3 x 1.7 x 1.7 and 1.4 x 1.2 x 1.2(inches) I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used and there may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of STARRETT No. 604R HOOK RULE SCALE 6" MACHINIST TOOLS*12 close. If you are going to bid on other auctions contact me for a payment extension. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or ... moreinsurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
12 Parallel Set-up Blocks Work Holding Machinist Gunsmith Lathe Milling Tool lot
Ebay Base This auction is for a mix of 6 pairs of Precision ground& hardened steel parallel blocks. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
Lot of (12) Machinist Set Up Blocks, Parallels, Vee, MORE, Precision, Ground
Lot of(12) Machinist Set Up Blocks. You'll get a set of(4) Blocks needing touch up. These have some rust and are all marked with the same markings so they are asset. A light touch up on your grinder and you have a perfect set. 1) Multi Vee Block fixture tool. 3) Parallels of different size. 2) Blocks that are marked"50mm" and are ABOUT 1" x 2" x 3" These have a small flange on the side. 1) Misc block about 1 x 2 x 3" that is unfinished on 2 edges so you can finish it right to size. and(1) Rectangle block with a large hole through the center. Most of these are ground and hardened. Visit our eBay store for more great values. Shipping and handling costs for this listing will be $13.95 within the U.S.A. We will ship internationally if a cost or calculator shows below. Or please inquire for international shipping ... morecosts. We will ship promptly and will do all we can to make sure you are satisfied with your purchase. Sales. And invoices for sales within the state of Michigan will have sales tax added. Thank you! 0913)
|
|
|
ANGLE PLATE COMPOUND 2X2X3.12" INSPECTION GRINDING MILL TOOLMAKER MACHINIST QA
ANGLE PLATE COMPOUND(1) 1-1/2" WIDE X 1-1/2" TALL X 3.12" LONG AS SHOWN! MADE OF HARDENED TOOL STEEL AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS. MACHINIST AND TOOLMAKERS ALIKE. PLATE IS IN EXCELLENT USED CONDITION AS SHOWN IN 12 SUPER-SIZE PICTURES. COMPOUND ANGLE PLATE WITH MINOR STAINS FROM HANDLING AS SHOWN. NO NAMES OR ENGRAVING. PLEASE LOOK! PRECISION GROUND COMPOUND ANGLE PLATE. ANGLE PLATE HAS( 27) 10 X 32 HOLES AS SHOWN. ORIGINALLY GROUND USING HERMANN SCHMIDT SQUARING BLOCK AND A BALL-WAY SURFACE GRINDER WOW IT IS NICE! COMPOUND ANGLE PLATE MEASURES 1.500" WIDE X 1.478" TALL X 3.122" LONG. SQUARING AREA. MEASURES.999" X 1.002" LAYED IN OPPOSITE DIRECTION THE CLAMPING AREA MEASURES.980" X 1.620" BLOCK HAS(27) TAPPED 10 X 32 HOLES IN ITS EDGES AND FACES AS SHOWN TO BOLT DOWN ... moreON YOUR BRIDGEPORT OR AS NEEDED. BLOCK ALSO HAS(1) 5/16" REAMED HOLE THRU TO BOLT DOWN AS NEEDED. THESE ARE SUPER HANDY FOR MOST GRINDING AND LIGHT BRIDGEPORT WORK ALSO! USE BUY NOW AND I WILL INCLUDE(2) TOOLMAKER MADE SWIVEL CLAMPS WITH THIS BLOCK if BUY NOW IS USED. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for FINAL SELLER BILLING when done bidding. FREE SHIPPING APPLIES TO ONE FREE
|
|
|
Brown & Sharpe 12" height gage #585 Vintage Machinist Precision Tool In Case
Brown& Sharpe Vintage Height Gage#585. In Original Case.12" Very Nice Vintage Condition. I am listing Several Other Vintage Machinist Tools. I will Combine Shipping.
|
|
|
MACHINIST TOOL MAKERS V-BLOCK PPSB 40X36X45 12
IN GOOD CONDITION!
|
|
|
MACHINIST WORKHOLDING LOT 12 PIECES V BLOCKS CLAMPS BARS BROWN & SHARPE B&S
FOR SALE IS A 12 PIECE LOT OF MACHINISTS WORKHOLDING BLOCKS AND CLAMPS. THERE ARE 4 V-BLOCKS AND ONE OF THEM IS A BROWN AND SHARPE 749. THERE ARE 3 CLAMPS AND 5 MISC BLOCKS. ALL ITEMS ARE USED. SOME MORE THAN OTHERS. I WOULD DESCRIBE THEM AS IN AVERAGE CONDITION. THE TALLER V-BLOCK IS MARKED WITH OWNERS NAME. THEY ALL HAVE DENTS, DINGS AND SOME SURFACE RUST. PLEASE LOOK AT PICTURES IN DETAIL AND ASK QUESTIONS BEFORE BIDDING.
|
|
|
PAIR OF BLOCKS PARALLELS TOOLMAKER MACHINIST 12 X 4 X 2 /12
PAIR OF BLOCKS PARALLELS TOOLMAKER MACHINIST 12 X 4 X 2/12. You will receive the items you see here.
|
|
|
Machinist Tools: Parallels - Taft Pierce 1-3/4 x 7/8 x 12, B & S 1-1/4 x 1 x 12
Up for auction is a lot of Parallels. All in usable condition. A little dirty/tarnished from age/use. The Brown and Sharpe Parallels have rust on them(see pics) Taft Pierce: 1-3/4" x 7/8" x 12" Brown& Sharpe: 1-1/4" x 1" x 12" Please view all pics as they are part of the description. Please see our other listings
|
|
|
12 Hold Down Blocks Parallels Machinist Gunsmith Toolmaker Milling Tools Lot USA
Ebay Base This auction is for a mix of 12 machinist workholding blocks and hold downs. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can be proud of, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-147f55eeccd-0x10b-
|
|
|
~~~MACHINIST TOOLS HARDENED 1-2-12 BLOCK BRIDGEPORT HARDINGE ATLAS CRAFTSMAN~~~
14.99 7d 8.99SH This listing is for hardened and ground steel block. Dimensions are 1” x 2” x 12” Condition is 6/10. CHECK MY OTHER TOOL LISTINGS
|
|
|
Vintage Machinist 12 Piece Lot from Estate
Lot of Vintage MACHINIST TOOLS. These are all different makers. 12 items are included. What you see is what you get everything you see in the pictures above. These tools came from the same tool box from an estate I have not picked through them at all. I am not knowledgeable about tools. Some of the items are a little rusty, and show wear. They are a bit dirty and I am not sure what is or isn't unused. Please see pictures and if you have any special questions about any particular item that you need better info or pictures for let me know and I will get back to you as soon as possible. There will be several more boxes of tools listed on my listings this box will ship flat rate to save in shipping tools sold as is 3 All items will be put into one flat rate box. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14842b4a185-0x10f-
|
|
|
NICE SET OF 12 JEWELERS OR MACHINIST METAL FILES
NICE SET OF 12 JEWELERS OR MACHINIST METAL FILES EACH MEASURES ABOUT 5&3/4 INCH LONG THEY LOOK LIKE NEW TO ME SEE PICTURE
|
|
|
2 LARGE MACHINIST PARALLELS 12 x 2 x 1 inches work holding tools *shlf
See photos. Some surface rust, edges are ground(not sharp) I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store ... moreto see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
2 LARGE STEEL MACHINIST PARALLELS 12 x 2 x 1 inches work holding tools *shlf
See photos. Some surface rust and mill/drill holes, edges are ground(not sharp) I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. ... moreVisit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
Lot of 12 Machinist Blocks Parallels Gage Tools Block Parallel Lathe
Confirmed Paypal Address Only Please As pictured Lot of 12 Machinist Blocks Parallels Gage Tools Block Parallel Lathe Everything is priced to sell. What a deal, why spend more My Policy: Please Examine Photographs Closely As They Are An Important Part Of The Listing And Are A Part Of The Description Of The Listed Item. Please do not assume that anything else comes besides what is pictured. Thank you*If there is an issue. Before leaving feedback or opening a case, please message us. It is important for us to maintain a high seller rating so we can continue to provide you with the lowest prices and cheapest shipping rates. Shipping: Most items will ship within one business day Do not ask to change your shipping address. You need to put your shipping address when making the payment in paypal Prices: I always aim to have the lowest price. If ... moreyou find a lower price item of the same type and quality. Please let me know and I will work with you on price Guaranteed to work as stated. Or your money back Issues: I do my best to listing items as accurately as I can. If you have any problem with the item you purchased please contact me and I will resolve the issues. PLEASE CONTACT ME BEFORE LEAVING FEEDBACK. Questions: I usually answer questions M-F 9am to 5Pm Eastern time. I get a lot of questions I ask for your patience if you don’t hear from me right away. Returns: Returned items will have a 20% restocking fee(IT COVERS OUR SHIPPING AND HANDLING COST TO LIST AND RELIST THE ITEMS) No returns on open software or laptops Insurance: If the item you get is damaged in the mail. And the item is insured, you will be responsible to file a claim. do not ship the damaged item back, it voids the insurance) I will provide you will all the needed information. My definition of condition: NEW: Never used. Comes with everything new, Package might be open just to check content· New other: new. Never used, but might be missing box, or have some marks on it· Used: Good working shape· Parts or repair: Something is wrong w
|
|
|
12" x 10" x 8" Challenge L-101 Right Angle Plate Block Machinist Setup
This Challenge Heavy Duty Right Angle Block Plate measures 12" x 10" x 8" and weighs approximately 66.6 lbs. It is used. And in very good condition. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the ... moretype and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. You are welcome to pick up your items with an appointment with no additional charges. Skidding charges will still apply. NO PAYPAL FOR WILL CALLED ITEMS Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Wi
|
|
|
CARR LANE SET OF 12 STEP BLOCKS IN WOOD CASE 4 CL30,4 CL20,4 CL10 MACHINIST TOOL
CARR LANE SET OF 12 STEP BLOCKS IN WOOD CASE 4 CL30.4 CL20,4 CL10 MACHINIST TOOL Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: CARR LANE SET OF 12 STEP BLOCKS IN WOOD CASE 4 CL30.4 CL20,4 CL10 NICE SET OF 12 STEP BLOCKS IN VERY GOOD CONDITION AS SHOWN IN ORIGINAL WOODEN CASE FROM AN ESTATE OF A PROFESSIONAL MACHINIST IN NEWPORT RI FEATURES: These versatile support blocks have serrations which are specially designed for excellent load bearing. A pair of blocks can be used together as a two-piece rest block. Or individually with a Step Clamp. All of our Step Blocks and Step Clamps have matching serrations, for maximum versatility. Larger blocks have a finger hole for easier handling. Made in USA. From a smoke and pet free environment PLEASE ... moreNOTE! PLEASE NOTE! PLEASE NOTE! I ONLY SHIP TO USA ADDRESSES! NO OVERSEAS SHIPPING! SORRY NO EXCEPTIONS! If you are located out of the USA BUT have a USA address that I can ship to. Kindly email me BEFORE you bid and advise me of that fact! Thank you! Shipping: SHIPPING TO USA ADDRESSES ONLY! I NORMALLY SHIP VIA Priority MAIL DELIVERY CONFIRMATION FREE E-MAIL FOR INSURANCE COSTS Payment: PAYMENT MUST BE MADE WITH PAYPAL ONLY! THE WINNING BIDDER IS RESPONSIBLE TO DELIVER PAYMENT TO ME VIA PAYPAL WITHIN SEVEN( 7) DAYS OF THE CLOSING OF THE AUCTION OR FORFEIT THE ITEM(s) I WILL NOIFIY YOU BY E-MAIL THROUGH USPS OR UPS WHEN I SHIP YOUR ITEMS I NORMALLY SHIP SAME DAY OR NEXT AFTER RECEIVING YOUR PAYMENT THROUGH PAYPAL. THANK YOU AND GOOD LUCK! inkfrog terapeak. I000000. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14a4d0cfb5b-0x10e-
|
|
|
Machinist Parallels 1 1/2 x 2 x 12 (2) Set Set Up Hold Down Grinding Milling
Up for your consideration is a set of parallels. They measure 1 1/2" x 2" x 12" And each has seven chamfered holes. Please ask any questions you might have. Make sure to look at the other related items that I currently have listed.
|
|
|
Machinist Step Blocks 6 Sets (12) Blks. 3 3/4" L x 2 1/4" H x 15/16" W
This is a lot of 6 sets or 12 Step blocks for machinist or toolmakers use. Each Individual block is 3 3/4" long x 2 1/4" high x 15/16" wide and weights 1 lb. 4 oz. each. Total weight of all 12 Blocks is 15 lbs. Ready for use. See scans email questions.
|
|
|
Machinist Set Up Block, Set of 12, Metalworking Tool, Metalworking Tools
Sizes are as follows: Large solid(2) 2"x1"x3/4; Small Solid(2) 1 3/8"x9/16"x5/16" Holes(1) 2 1/2'x1 1/2"x1/4" Holes(1) 2 9/16"x1 1/2"x1 1/2" Holes(2) 2 1/2"x1"x3/16" Holes(2) 2-9/16"x3/4"x3/16" Holes(2) 2 9/16"x1/2"x1/4" I try to describe each item to the best of my ability. I am not an expert. Please feel free to ask questions and to ask for more photos. The photos are the description of the item. I will combine items for shipping whenever possible. Payment is expected within 2 days after close of auction. Unless prior arrangements have been made. Feedback will be left when feedback is given. Please leave feedback when you receive the item so I know it was delivered. Shipping will be the day after payment is received. Thank you for viewing ... morethis auction. Good Luck bidding!
|
|
 |