|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$7.95 Shipping Condition: Used Location: Plano, United States SquareTrade © AP6.0 Starrett 278 2 V-Blocks(1 Pair) And 2 Clamp Complete Set You are bidding on a Like New Starrett 278 2 V-Blocks(1 Pair) And 2 ... moreClamp Complete Set. Starrett No. 278 V-Blocks are precision ground to extreme accuracy. Product Description Blocks made of hardened steel. Manufactured and numbered in pairs. Tapped holes in sides(1/4- 20) for mounting face plates and angle irons. Angle iron may be attached to lathe face plate or held by magnetic chuck. 1" Diameter clamping capacity. Each block is about 1-1/4" square and 1-5/8" long. Product Features Blocks are made steel. Hardened and ground and numbered in series so that the V's in each set are always in alignment The blocks have a 1/4-20 tapped hole through the sides so that they may be attached to an angle iron Vees are central. Parallel, and square with the ends and sides. V-Blocks are precision ground to extreme accuracy. Starrett workmanship For more Information see: http:www.starrett.com/metrology/product-detail/Precision-Measuring-Tools/Precision-Hand-Tools/Precision-Shop-Tools/V-Blocks/278 The L. S. Starrett Company has been a continuous symbol of leadership and dependable service in the manufacture of fine precision tools. I will fully guarantee this item with a cost of $268- Proudly made in the US" We have lots of quality inspection tools available- see my other auctions. Shipping in the Continental US is $6.90- I have very competitive rates for International bidders that are always welcome. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
Buy It Now
$12.45 Shipping Condition: New Location: Chicago, United States BROWN AND SHARPE 599-920-8 GROUND STEEL PARALLEL 6 x 1/4 x 1/2".
Buy It Now
Free Shipping Condition: New Location: Lathrop, United States Parallelism: 0.0002". Accuracy: The size tolerance is around 0.0003, and the parallelism tolerance is 0.0002. 10 Pair 1/8" x 6" x (1/2" to 1-5/8") Matched ... moreMachinist Thin Parallel Bar Set. Hole: There are two holes on each of the parallel bar, the size of the hole is 13/64, 1/4, 5/16, 3/8, 7/16, 1/2.
Buy It Now
$15.35 Shipping Condition: Used Location: New Smyrna Beach, United States PAIR of MATCHED MAGNETIC LAMINATED TRANSFER BLOCKS GRINDING MILLS Condition/I n fo: The size is 4 5/8 X 2 3/16 X 11/16. The pair weights 4 lbs These blocks ... moreare not magnetic themselves but are designed to be used with a magnetic chuck to transfer the magnetism to the work piece. Welcome to my Friday night auctions. Last weeks auctions auction close one minute apart and new ones go up. Action starts at 9:00PM Eastern time. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States Made of high quality casting. Unit Weight: 6 Ounce Per Block Rough Estimation . Qty: 1 Set ( 2 Pc Per order).
Buy It Now
$16.10 Shipping Condition: Used Location: Cherokee Village, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: Steel Parallel Set 9 Pair 1/4 inch Thick 6 inch Long 0.0002 inch Precision Plastic Case Dimension: 7 in L x 8-1/2 in W x 2-1/2 in H *Rough ... moreEstimation* Weight: 9-3/4 Pounds *Rough Estimation* Accuracy (inch): 0.0002 Thickness (inch): 1/4 Length (inch): 6 Package Including： 1 Pair of 3/4 X 6 X 1/4" inch 1 Pair of 7/8 X 6 X 1/4 inch 1 Pair of 1 X 6 X 1/4 inch 1 Pair of 1-1/8 X 6 X 1-4 inch 1 Pair of 1-1/4 X 6 X 1/4 inch 1 Pair of 1-3/8 X 6 X 1-4 inch 1 Pair of 1-1/2 X 6 X 1/4 inch 1 Pair of 1-5/8 X 6 X 1/4 inch 1 Pair of 1-3/4 X 6 X 1/4 inch Supplied With Plastic Case When Purchase.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description： -Made From Fine Quality Tool Steel, Stress Relieved Against Distortion. -Precision Ground And Hardened -Case Hardened Rc 55 To 62 On 2 Sides, ... moreTop & Bottom. -Tolerance Is Parallel To 0.0003 On 2 Sides, Top And Bottom. -Dimensions Are Within 0.001" Allowance. -2 Holes In Each Parallel -Complete With Fitted Durable Plastic Case -1/8 X 1/2 X 4", 1/8 X 5/8 X 4", 1/8 X 3/4 X 4", 1/8 X 7/8 X 4", 1/8 X 1 X 4", 1/8 X 1-1/8 X 4", 1/8 X 1-1/4 X 4", 1/8 X 1-3/8 X 4", 1/8 X 1-1/2 X 4", 1/8 X 1-5/8 X 4". Dimensions Are Within 0. 001" Allowance. Package Include： 10*Parallel Blocks.
Buy It Now
$65.26 Shipping Condition: Used Location: Brattleboro, United States This is a pair of antique interlocking cast iron parallels. Be sure to see all the photo for details, including where the tip of one finger is broken ... moreoff and missing. We'll reply as quickly as possible.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: 1/8 X 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight ... moretolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support. Features: Made from fine quality tool steel, stress relieved against distortion. Precision ground and hardened Case hardened RC 55 to 62 on 2 sides, top & bottom..
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Made of casting steel, properly seasoned against distortion. Steel V Blocks. Machine Tools. Supplied in matched pair. Laser Engraving Machine. Hand Tools. ... moreWhy Buy From Us.
Buy It Now
Free Shipping Condition: New Location: Norcross, United States SHARS BRAND NEW ONE PAIR OF 1-2-3 BLOCK NEW Product Code 303-5500 Product description Size within +/ 0002" Flatness and parallelism within.0002" ... moreSquareness on all sides is 0.0003" per inch Pairs are matched to a tolerance of 0.0002" Product application Used for set-up. Layout and inspection jobs Product features Has 23 holes with 5 holes tap to 3/8-16 threads for clamping and 18 untapped holes Made of hardened tool steel and precision ground on all six sides Cross drilling design allows efficient use of lower weight with maximum strength Heat treat and hardness 56 to 60 RC 2 pieces per set Weight: 2.1 Lbs Shipping Charge: We always try to save shipping charges for our customers and we understand that for this 123 Blocks you will notice the shipping charge. In most cases, is almost the same as the actual item's price. This is due to the fact that the 123 block's weight is over the weight limit of US Postal Service First Class Mail service(13 ounce max weight) so we have no other available option but to offer only US Postal Service Priority Mail Small Flat Rate service or UPS ground service. We regret that we can not offer a lower shipping cost at this time and we appreciate your understanding. If you like you can also purchase these different types of 123 blocks. Please visit my Ebay store: All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Please direct any questions to our eBay Message Box. click here to visit my Ebay store now SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shippment wi
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Quantity: 1 Pair. Made Of Precision-Grade Tool Steel Hardened And Ground On All 6 Sides Of Block. Size Within +/-. 0002". 2 Pcs Weight Flatness And Parallelism ... moreWithin. 0002".
Buy It Now
$15.35 Shipping Condition: New Location: Chicago, United States BROWN AND SHARPE 599-920-40 6 x 1/2 x 1 1 PAIR OF PARALLELS NEW!
Buy It Now
$15.35 Shipping Condition: New Location: Chicago, United States BROWN AND SHARPE 599-920-36 PARALLELS 6 x 1/2 x 3/4”. this is a set - 2 parallels.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Steel Parallel Set 9 Pair 1/4 inch Thick 6 inch Long 0.0002 inch Precision Plastic Case Dimension: 7 in L x 8-1/2 in W x 2-1/2 in H *Rough Estimation* ... moreWeight: 9-3/4 Pounds *Rough Estimation* Accuracy (inch): 0.0002 Thickness (inch): 1/4 Length (inch): 6 You'll Receive: 1 Pair of 3/4 X 6 X 1/4" inch 1 Pair of 7/8 X 6 X 1/4 inch 1 Pair of 1 X 6 X 1/4 inch 1 Pair of 1-1/8 X 6 X 1-4 inch 1 Pair of 1-1/4 X 6 X 1/4 inch 1 Pair of 1-3/8 X 6 X 1-4 inch 1 Pair of 1-1/2 X 6 X 1/4 inch 1 Pair of 1-5/8 X 6 X 1/4 inch 1 Pair of 1-3/4 X 6 X 1/4 inch Note.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States HARDENED AND PRECISION GROUND. CAPACITY: 1-1/2". SQUARE AND PARALLEL TO ACCURACY: 0.0002".
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Pair Of Cast Iron V-Blocks. Used As a Support For Round Stick. Unit Weight: 1.70 Lbs Per Block Estimate Only . Quantity: 1 Set ( 2 Pc Per order). Product ... moreDetail. High Quality Castings, Properly Seasoned Against Distortion.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Cross drilling design allows efficient use of lower weight with maximum strength. Made of hardened tool steel and precision ground on all six sides. Size: ... more1 x 2 x 3". Size within +/-. 0002". Product Detail.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Pair Of 2" x 3/4'" x 1-1/4" Cast Iron V-Blocks. Unit Weight: 6 Ounce Per Block Estimate Only . Quantity: 1 Set ( 2 Pc Per order). Product Detail.
Buy It Now
$17.25 Shipping Condition: Used Location: Hamlin, United States
Buy It Now
$24.99 Shipping Condition: Used Location: Lombard, United States Used condition with ding and scratches. Some staining to the metal finish. Overall nice shape. Please see photos for details. Thanks for looking
Buy It Now
Free Shipping Condition: New Location: Chino, United States Better Values Friendly Service Fast Shipping BRAND NEW 9 Pair Parallel Wavy Set 9 pairs: 1/2 to 1-1/12 in 1/8" steps Includes: 2) 1/2' 2) 5/8' ... more2) 3/4' 2) 7/8' 2) 1' 2) 1-1/8' 2) 1-1/4' 2) 1-3/8' 2) 1-1/2' Height and Parallelism to.0002" For precision clamping of parts in drilling. Boring, milling, grinding, assembly work Use to clamp a group of flat parts. Also use to hold fragile or delicate parts Hardened spring steel Wooden case dimension: 5-1/4'L x 6-1/4'W x 2-1/8'H( Included) Quantity: 1 Set Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO. AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service. Payments Paypal payment only please. Buyer can use MasterCard. Visa, Discover and American Express through Paypal. It is Safe, Fast& Reliable. In all cases payment is expected within 7 days of sale date. Contact Info We are here to help. If you have any questions or concerns regarding your purchase, please feel free to contact us at any time using the eBay messaging system. Please allow 24 to 48 hours to receive a response. We will do our best to answer all your questions as soon as we can. Policy All purchases come with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 8 Pair 1/2' x 6' Parallel Set We value our customers and products like we value our photos in our ad. Thank you. Descriptions: Brand New 8 Pair ... more1/2' x 6' parallel set +/ 0002" in Parallelism Paired +/ 0002" in Height Made from high quality tool steel stress relief against distortion. Precision ground and hardened All the size are 6" Long and 1/2" Wide or Thick Easier Handling because there are 2 holes in each one 1/8" Incrementation of height from 7/8" to 1-3/4" Each Set contains 1 Pair of the height listed: 7/8. 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4" Contents include: 1 Pair 1/2" x 7/8" x 6" 1 Pair 1/2" x 1" x 6" 1 Pair 1/2" x 1-1/8" x 6" 1 Pair 1/2" x 1-1/4" x 6" 1 Pair 1/2" x 1-3/8" x 6" 1 Pair 1/2" x 1-1/2" x 6" 1 Pair 1/2" x 1-5/8" x 6" 1 Pair 1/2" x 1-3/4" x 6" Storage case INCLUDED Weight: 18.05 lbs(roughly) Case overall dimension: 7-1/2'L x 9-3/4'W x 3'H Quantity: 1 set(8 pair. Total of 16 pieces) We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* 9.25% sales tax will be added at check out. Shipping and Handling to Lower 48 States: FREE SHIPPING Ground Service. Excluding PO BOX. APO, HI, AK, PR and GU. Additional shipping charge applies to APO. AK, HI, GU, PR and VI, addresses. Please contact seller prior
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: 1/8 × 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight ... moretolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support..
Buy It Now
Free Shipping Condition: New Location: La Puente, United States 1-2-3 Blocks Matched Pair Hardened Steel 23 Holes Precision Machinist Milling Fitted in a Wooden Case. 23 holes includes (5) 3/8-16 threaded holes for ... moreclamping and (18) untapped holes. Date First Available : April 28, 2023.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： 1/8 × 3" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for ... moretight tolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support. Features: Made from fine quality tool steel that is stress relieved against distortion..
Buy It Now
$15.50 Shipping Condition: New Location: Mentor, United States +/-. 0001" in Parallelism. HARDENED & GROUND FROM STABILIZED SHOCK. 20 PAIR PARALELL. All are 6" Long and 1/32" Thick. Height Specifications Relate to ... moreConsistency Within Each Pair. Contains One Pair of Each Height Listed.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Situated at the industrial hub of India we specialize in providing complete tooling solutions. ALL STEEL PRECISION V BLOCKS & CLAMP SET. Made from heat-treated, ... morehardened tool steel for durability and extended lifespan.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. ... moreIf you are not sure if this model is right for you, please feel free to contact us. Features: Steel Parallel Set 9 Pair 1/4 inch Thick 6 inch Long 0.0002 inch Precision. Plastic Case Dimension: 7 in L × 8-1/2 in W × 2-1/2 in H *Rough Estimation*. Weight: 9-3/4 Pounds *Rough Estimation*. Accuracy (inch): 0.0002 Thickness (inch): 1/4 Length (inch): 6.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Steel Parallel Set 9 Pair 1/4 inch Thick 6 inch Long 0.0002 inch Precision Plastic Case Dimension: 7 in L x 8-1/2 in W x 2-1/2 in H *Rough ... moreEstimation* Weight: 9-3/4 Pounds *Rough Estimation* Accuracy (inch): 0.0002 Thickness (inch): 1/4 Length (inch): 6 Includes: 1 Pair of 3/4 X 6 X 1/4" inch 1 Pair of 7/8 X 6 X 1/4 inch 1 Pair of 1 X 6 X 1/4 inch 1 Pair of 1-1/8 X 6 X 1-4 inch 1 Pair of 1-1/4 X 6 X 1/4 inch 1 Pair of 1-3/8 X 6 X 1-4 inch 1 Pair of 1-1/2 X 6 X 1/4 inch 1 Pair of 1-5/8 X 6 X 1/4 inch 1 Pair of 1-3/4 X 6 X 1/4 inch Supplied With Plastic Case When Purchase.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Key Features:1/8 × 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight ... moretolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support.Made from fine quality tool steel, stress relieved against distortion.Precision ground and hardenedCase hardened RC 55 to 62 on 2 sides, top & bottom.Tolerance is parallel to 0.0003 on 2 sides, top and bottom.Dimensions are within 0.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: 1/8 × 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight ... moretolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support..
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States Made of hardened tool steel and precision ground on all six sides. Size: 1 x 2 x 3". Size within +/-. 0002". Cross drilling design allows efficient use ... moreof lower weight with maximum strength. Light Item.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 9 Pair 1/4" Hardened Steel Parallel Set 6" Long 0.0002" Square Precision 3/4 in 1-3/4. 9 Pair 1/4" x 6" Hardened Steel Parallel Set. Quantity: 1 Set (9 ... morePair, Total of 18 Pieces). 1 Pair of 3/4 X 6 X 1/4".
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： 1/8 × 3" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight ... moretolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support. Description： Made from fine quality tool steel that is stress relieved against distortion. Precision ground and hardened..
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States · One Reversible Swing-away Clamp is Provided with each V-Block. · All V-Blocks are Parallel, Square and Centered within. 0002". · Capacity: 19/32". · ... more90° "V's",HRC 58 ～60. at Fixed Prices. · Ideal for quick check, accurate to hold the work piece for inspection, layout, machining and grinding.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： 1/8 X 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight ... moretolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support..
Buy It Now
Free Shipping Condition: New Location: India The use of coolants will not effect this Vee Block as it is fully sealed. These are used for grinding and drilling work and even for light milling work. ... moreIt can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States Technical Specification Item Precision Adjustable Parallels Number of Pairs 6 Measuring Range(In. 3/8 to 2-1/4 Length(In. 1-5/8 to 4-7/8 Width(In. 5/16 ... moreParallelism(In. +/0.001 Includes Plastic Pouch Compliance and Restrictions None This listing is for each. Features Two precision ground pieces. Slide smoothly on each other, Locked into position by set screws, Quickly inserts into openings& expands to exact size, Screwdriver only included in sets, Model"985-131 Set"Type"Adjustable Parallel Sets"Weight(lbs)2"Brand"Mitutoyo"Material"Hardened Steel"Package Length(in.9.5"Package Width(in.5.75"Package Height(in.0.75"Set IncludesRange"3/8. 2-1/4, Angle(deg.No. of Heads0Number of Heads0Number of Leaves0Number of Blocks0Model"985-131 Set"Brand"Mitutoyo"Range"3/8, 2-1/4, Package Height(in.0.75"Package Length(in.9.5"Package Width(in.5.75"Weight(lbs)2"Type"Adjustable Parallel Sets"Material"Hardened Steel"Angle(deg.Set Includes. Manufacturer, Mitutoyo, Mfr Part, 985-131, Weight, 2.00, UPC,
Buy It Now
$10.45 Shipping Condition: Used Location: Warren, United States Suburban 1x2x3" Solid Set-Up Blocks. Has 1/2" center hole and are made of high-grade steel. Comes with a wood holding box.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. ... moreIf you are not sure if this model is right for you, please feel free to contact us. .
Buy It Now
$25.33 Shipping Condition: New – Open box Location: Venice, United States Pair of Cast Iron V-Block. Material Cast Iron. V Angle 90. Sold As Pair Matched Pair. Overall Width (mm) 139.70. NEW-OPEN BOX. Item is in excellent condition, ... morewith no signs of previous use or wear.
Buy It Now
$12.00 Shipping Condition: Used Location: Haltom City, United States
Buy It Now
$7.75 Shipping Condition: New Location: Huntington Beach, United States 1-2-3 blocks are heat treated and case hardened to HRC 57-62. Made of precision-grade tool steel hardened and ground on all 6 sides of block. 1/8" thin ... moreparallel set & 1 matched pair 1-2-3 blocks 23 holes.
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States 5 X 2 X 3-1/8" CAST IRON PAIR V-BLOCKS V-BLOCK GROUND NEW Product Code 303-5223 Product description Length: 5" Width: 2" Height: 3-1/8" ... moreV" 2-1/2" Product application Used as a support for round stick Product features All sets are matched High quality castings. Properly seasoned against distortion Supplied in pairs Blocks are accurately machined square and parallel 90 Degree V in center We also have other V& Clamps Block available in our Ebay Store: All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Please direct any questions to our eBay Message Box. SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via UPS or USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shippment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Pair Of Cast Iron V-Blocks. Used as a support for round stick. 90 Degree V in center. Unit weight: 4.65 LBS EACH. Product Detail. Height: 3-1/8". Supplied ... morein pairs. High quality castings, properly seasoned against distortion.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States DIMMENSION: 1-3/8" X 1-3/8" X 1-3/16"--- 90 DEGREE V-BLOCK PAIR WITH CLAMPS MAX. CAPACITY: 19/32" MADE OF HARDENED STEEL, TOP QUALITY HARDNESS: HRC58 ... moreTO 60 SQUARE AND PARALLEL TO ACCURACY: 0.0002" HARDENED AND PRECISION GROUND Brand munirater MPN Does Not Apply Warranty 1 year Shape V Block Block Material Hardened Steel Block Type V-Block UPC Does not apply Surface Finish Standard Modified Item No Modification Description No.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： 6 Pcs Adjustable Parallel Sets Minimum Measuring Range (Inch): 3/8'' Maximum Measuring Range: 2-1/4'' Length Range From : 1-3/4" to 5" Closed ... moreHeight Range: 3/8" to 1/2", 1/2" to 11/16", 11/16" to 15/16", 15/16" to 1-5/16", 1-5/16" to 1-3/4", 1-3/4" to 2-1/4" Quickly Adjustable And Locked With Screws For Micrometer Applications:For layout, inspection, shop work, set-up, etc. Package List: 6Pcs Adjustable Parallel Set 3/8" - 2-1/4" High Precision US .
Buy It Now
$20.00 Shipping Condition: New Location: Mountain Home, United States Cap Pair SPI V-Block & Clamp 1 5/8" New
Buy It Now
Free Shipping Condition: New Location: La Puente, United States 1/2 X 6" 4 Pair Parallel Set Made from fine quality tool steel that has been stress relieved against distortion. Precision ground and hardened. Case hardened ... moreRC 55 to 62 on 2 sides, top and bottom only.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Dimmension: 1-3/8" X 1-3/8" X 1-3/16"--- 90 Degree V-block Pair With Clamps Max. Capacity: 19/32" Made Of hardened Steel, Top Quality Hardness: ... moreHrc58 To 60 Square And Parallel To Accuracy: 0.0002" Hardened And Precision Ground Package Including： 1-3/8x1-3/8x1-3/16" Capacity V-Block V blocks Clamp hardened air Set .0002" Brand findmall MPN 430768 Type V-Block UPC Does not apply Block Material Hardened Steel Shape V Block Warranty 1 year.
Buy It Now
Free Shipping Condition: New Location: Azusa, United States [HIGH-QUALITY MATERIALS]: Made from high-quality tool steel with a hardness of 50 HRc, this parallel set is durable and long-lasting. [EASY STORAGE AND ... moreTRANSPORT]: Complete with durable plastic case for easy storage and transport.
Buy It Now
$9.25 Shipping Condition: Used Location: New Britain, United States | | | | | | | Part# ALL-55525, Heat treated and case hardened to HRC 57-62, Made of precision-grade tool steel hardened and ground on all 6 sides of block, ... moreAccuracy and squareness on all sides within.0001"0002" Dimensions- 1" x 2" x 3" 3.5 lbs. weight, Quantity deals on 123 blocks. Parallels, sets, and inspection/set-up tooling in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote We sell an entire line of machine shop tooling! Contact us for best pricing guarantee) 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international addresses, there may be a fee to do so. Should you have any further questions regarding our shipping policies(international shipping, quantity discounts, combined shipping,
Buy It Now
$10.75 Shipping Condition: Used Location: Indianapolis, United States Set of 10 pairs. 2 pairs are approx, 2 1/2 X 3 3/4 adjustable sides X 1 in. can adjust up to 6 inches. 2 pairs are approx. 1 X 1 3/4 adjust able sides, ... moreX 1 in. 4 pair are approx. 3/4 X 1 adjustable sides X 1 in. Used. No brand name but made by J.A. Bee Plastics in Elwood Indiana.
Buy It Now
$35.00 Shipping Condition: Used Location: Sheffield, United States VERY NICE IN THE BOX STARRETT 1/2" THICK No. 384 PARALLEL SET (10 TOTAL PARALLELS (5 ) FACTORY MATCHED PAIRS) AS FOUND AND WITH FACTORY CASE ALSO AS FOUND. ... moreStarrett No. 384 Steel Parallels are hardened and ground to close limits.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States 5 X 2 X 3-1/8" CAST IRON PAIR V-BLOCKS V-BLOCK GROUND NEW Product Code 303-5223 Product description Length: 5" Width: 2" Height: 3-1/8" ... moreV" 2-1/2" Product application Used as a support for round stick Product features All sets are matched High quality castings. Properly seasoned against distortion Supplied in pairs Blocks are accurately machined square and parallel 90 Degree V in center We also have other V& Clamps Block available in our Ebay Store: All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Please direct any questions to our eBay Message Box. SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via UPS or USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shippment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: 1/8 × 3" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight ... moretolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support. Made from fine quality tool steel that is stress relieved against distortion. Precision ground and hardened. Complete with a fitted wood case..
Buy It Now
Free Shipping Condition: New Location: Meriden, United States EN31 Deep Hardened Ultra Precision 1-2-3 Blocks (23 Holes) ((1 Pair (2 Pc))). Deep Hardened, Matched Pair, Precision Ground, Even Chamferring on all 6 ... moresides. Size of the block is 1" x 2" x 3". Total 23 Through Holes being done in 1 operation (5 tapped drills 3/8" x 16 TPI & 18 plain drills).
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Key Features: Steel Parallel Set 9 Pair 1/4 inch Thick 6 inch Long 0.0002 inch Precision. Plastic Case Dimension: 7 in L × 8-1/2 in W × 2-1/2 in H *Rough ... moreEstimation*. Weight: 9-3/4 Pounds *Rough Estimation*. Accuracy (inch): 0.0002 Thickness (inch): 1/4 Length (inch): 6 Please check product compatibility carefully to ensure it is the product you need. So as not to waste your time and energy on return. Includes: 1 Pair of 3/4 × 6 × 1/4" inch 1 Pair of 7/8 × 6 × 1/4 inch 1 Pair of 1 × 6 × 1/4 inch 1 Pair of 1-1/8 × 6 × 1-4 inch 1 Pair of 1-1/4 × 6 × 1/4 inch.
|
|
|
|
MINT PAIR STARRETT USA Matched Ground Precision V BLOCKS Starrett #271 1-1/4" #A
This Sale is for One Pair(2) Mint used STARRETT USA Matched Ground V BLOCKS Starrett No. 271(pair) 1-1/4" 32mm) LOT"A" Features; Case hardened steel for wear resistance. For use singly or in pairs, Includes a steel rod that passes through each block, fi rmly held by friction positioning to keep blocks in alignment. A 6" scale shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my other sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items ... morecross the border. These are the sole responsibility of the buyer. have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We accept PAYPAL for sales within north America. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possession of any purchased equipment, device or component, 3. any p
|
|
|
STARRETT No706BZ Pair 1-2-3 BLOCK CASE TOOLMAKER MACHINIST SINGLES IN CASE HERE
STARRETT TOOL CO. No. 706 BZ. FACTORY MATCHED PAIR. OVER $500 CURRENT LIST. 1"2"3" BLOCKS WITH CASE. IN FANTASTIC ORIGINAL CONDITION. GREAT MAYBE NEVER USED CONDITION(MATCHED PAIR LOOK! OWNED BY INSPECTION LAB. MADE OF HARDENED AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS. MACHINIST AND TOOLMAKERS ALIKE. THESE BLOCKS ARE IN EXCELLENT CONDITION AS SHOWN AND WERE FROM STORAGE IN A GERSTNER BOX SOON TO BE LISTED IN A METROLOGY LAB. WE ALSO HAVE MOORE BLOCKS LISTED AS WELL AS MITUTOYO. SUBURBAN TOOL CO. AND VERY SOON HERMANN SCHMIDT 1" 2" 3" BLOCKS NO LONGER MADE! BLOCKS MEASURE 1.0000" THICK x 2.0000" WIDE X 3.0000" TALL WITH(10) COUNTERBORED 17/32" AND CLEARANCE DRILLED 11/32" HOLES FOR 5/16" X 18 SOCKET-HEAD CAPSCREWS WHICH ALLOWS THESE TO BE BOLTED TOGETHER OR TO ANOTHER PRECISION ... moreTOOL. CURRENT LIST FOR THE MATCHED PAIR IS $517.00 in my current catalog or online.SEE BELOW! WHAT MORE CAN I SAY! EXCELLENT USEFULL BLOCKS FOR SURFACE GRINDER OR BRIDGEPORT LIGHT MILLING WORK. SEE PICS. FACTORY SPECS LISTED BELOW: Starrett Inspection Blocks Inspection Blocks by Starrett No. 706 Series 1 x 2 x 3" No. 706M Series 25 x 50 x 75mm Starrett 1 x 2 x 3 Blocks are manufactured to precision tolerances. These blocks are of great value for all inspection laboratories and in-shop setups where positioning is important. High accuracy Hardened steel. Ground and lapped Matched pair available Specifications Block Dimensions 1 x 2 x 3" 25 x 50 x 75mm) Parallelism.0001" 0.003mm) Squareness.0001 IN/IN(0.003mm/25mm) Hardness RC 63-65 Flatness.0001" 0.003mm) Inch Blocks Catalog No. Description Price 706AZ Single 1 x 2 x 3 Block in Case $236.25 706BZ Matched Pair Blocks in case $517.00 PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You w
|
|
|
BROWN&SHARPE MATCHED PAIR V-BLOCK 1-1/4" HARDENED 750-1 INSPECTION GRIND MILL QA
MATCHED PAIR OF BROWN&SHARPE 750-1 V-BLOCKS(2) WITH CLAMPS(2) HARDENED TOOL STEEL VBLOCKS WITH CLAMPS. VBLOCKS ARE IN VERY GOOD USED CONDITION AS SHOWN IN PICS. NO ENGRAVING I CAN SEE ANYWHERE. GENTLY USED V-BLOCKS WITH CLAMPS! V BLOCKS(2) WITH(2) CLAMPS AND(2) VEE'S IN EACH BLOCK MADE OF HARDENED AND PRECISION GROUND TOOL STEEL USED BY MACHINIST AND TOOLMAKERS ALIKE. V BLOCKS MEASURE 1-5/8" LONG x 1-1/4" WIDE AND ARE 1-1/4" TALL. THE VEE WIDTH IS APPX 1" AND 9/16" WITH A WORK CAPACITY OF 1" EXCELLENT USEFULL HARDENED V BLOCKS FOR SURFACE GRINDER OR BRIDGEPORT LIGHT MILLING WORK. WE HAVE USED BLOCKS JUST LIKE THESE FOR MANY INSPECTIONS AND ON A JIG-GRINDER.SURFACE GRINDER AND EDM, THEY WORK VERY WELL. NOT AS BIG AS OUR 568 STARRETTS BUT VERY HIGH QUALITY. SEE PICS. NEW MATCHED PAIR CURRENTLY LISTS FOR ... more$292.00! SPECS LISTED BELOW FROM B&S CATALOG: ACCURACY: SURFACES(EXCEPT V-GROOVES) ARE PARALLEL& SQUARE WITH EACH OTHER WITHIN.0003" V-GROOVE IS 90* +.0000" 0002" V-GROOVES ARE SQUARE AND PARALLEL WITH ALL SURFACES WITHIN.0003" CORRESPONDING DIMENSIONS FOR EACH FACTORY MATCHED PAIR ARE ALIKE WITHIN.0003" PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait
|
|
|
Tool Maker Made setup Parallels Hardened and Ground PAIR 1.1" x 1.5" x 5.25"
Tool Maker Made Setup Parallels 2 pcs. Matching Pair in Excellent condi tion re ady for use. Each one has 2) 3/8" counterbores for shcs. other thru holes for setup and a parallel ledge. Hardened and Ground Tool Steel USA 1. 1" x 1. 5" x 5.25" 4 lbs. Combine with other lots and save! For multiple purchases ending within 3 days of each other please hold payment for invoice. To receive combined shipping discount. For auctions ending more than 3 days apart please pay won auctions in full and receive shipping discounts on final sale. There is a small handling fee on all sales, which is included in shipping cost. Multiples to be determined on a case by case basis, upon the number to be packed. I ONLY offer free shipping when listing is marked as such and Best Offers are accepted plus shipping and handling charges, unless otherwise ... morelisted. Will send free shipping with best option UPS or USPS. Please take time to view all photos, read all descriptions, and ask questions if necessary before bidding. Thank You for viewing, bidding and purchasing, GOOD LUCK! Check out my! Be sure to add me to your!
|
|
|
PAIR OF MACHINIST SET UP ANGLE PLATES BLOCKS TOOLS 4-3/4" x 3-1/4" x 2-1/2"
These angle plate/ blocks are as good as new. Parallel and perpendicular surfaces are true. Plates are 2-1/2" wide with one leg 4-3/4" long. And the other 3-1/4" long. I have 5 other PAIRS/ SETS in my other auctions. Buy more than one. And I will combine shipping cost. Please look at all of the pictures. As they are part of my description since I'm NOT an expert on everything I sell. I try to show AND describe any damage. Any questions- please feel free to email me or call me at 586-850-4221- bid confidently as I guarantee that you will be a satisfied customer. I have positive feedback for over 1100 transactions! See payment and shipping terms below. Thanks for looking. George Check out my! Be sure to add me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e5a07354c-0x104-
|
|
|
Starrett 278 2 V-Blocks (1 Pair) And 2 Clamp Complete Set
SquareTrade © AP6.0 Starrett 278 2 V-Blocks(1 Pair) And 2 Clamp Complete Set You are bidding on a Like New Starrett 278 2 V-Blocks(1 Pair) And 2 Clamp Complete Set. Starrett No. 278 V-Blocks are precision ground to extreme accuracy. Product Description Blocks made of hardened steel. Manufactured and numbered in pairs. Tapped holes in sides(1/4- 20) for mounting face plates and angle irons. Angle iron may be attached to lathe face plate or held by magnetic chuck. 1" Diameter clamping capacity. Each block is about 1-1/4" square and 1-5/8" long. Product Features Blocks are made steel. Hardened and ground and numbered in series so that the V's in each set are always in alignment The blocks have a 1/4-20 tapped hole through the sides so that they may be attached to an angle iron Vees are central. Parallel, and square with ... morethe ends and sides. V-Blocks are precision ground to extreme accuracy. Starrett workmanship For more Information see: http:www.starrett.com/metrology/product-detail/Precision-Measuring-Tools/Precision-Hand-Tools/Precision-Shop-Tools/V-Blocks/278 The L. S. Starrett Company has been a continuous symbol of leadership and dependable service in the manufacture of fine precision tools. I will fully guarantee this item with a cost of $268- Proudly made in the US" We have lots of quality inspection tools available- see my other auctions. Shipping in the Continental US is $6.90- I have very competitive rates for International bidders that are always welcome. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
|
|
|
*MACHINIST TOOLS LATHE MILL *PAIR OF PARALLEL BLOCKS *1 x 2 x 3* MADE IN USA
UP FOR AUCTION MACHINIST TOOLS& PARTS· PARALLEL BLOCKS· 1 X 2 X 3· MADE IN USA- ANTON BROOKLYN. NY* PLEASE REFER TO ALL PICTURES TO SEE CONDITION* PLEASE REFER TO ALL PICTURES TO SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* Being SOLD AS IS– Do not know much about machinist tools but will try to describe as best I can. I am in the learning process. So any feedback will be appreciated. No RETURNS. I will combine shipping for more than one purchase. Please look at our other listing.We have a large array of machinist tools up for auction. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE AND WILL TRY TO WORK WITH YOU AS BEST I CAN. SERIOUS INQUIRIES ONLY. Please wait ... moreuntil auction has ended and invoice has been received to confirm all costs to buyer.
|
|
|
PAIR V BLOCK MACHINIST, LATHE MILL ,jJIG GRAINDER TOOL ROOM 1.25"X 1.25"X .93"
PAIR OF HIGH PRECISION V BLOCKS FOR MACHINIST. LATHE MILL,jJIG GRAINDER TOOL ROOM SIZE: 1.25"X 1.25"X.93" WITH CLAMPS GREAT WORKING CONDITION
|
|
|
THIN PARALLEL 1/8" 10 PAIR SET MACHINIST MACHINE SHOP
10 PAIR 1/8" X 1/2"1 5/8" THIN PARALLEL SET We ship fast! 1 day handling! set is in like new condition. Come in plastic protective case. Everything is in like new condition. Very lightly used. Thanks and please remember to take a few moments and leave feedback.
|
|
|
Brown & Sharp Pair V-Blocks Clamps 750 A 599-750-1 original box machinist tools
A Set of 2 V-Blocks(750 A) with 2 Clamps by Brown& Sharp MFG. CO. 599-750-1 in original box. Accuracy.002 Up for auction is a pair of vintage V-Blocks(750 A) with 2 Clamps by Brown& Sharp. These V-blocks are used but in like new condition. My father has taken meticulous care of his tools(see photos) My father purchased these new over 40+ years ago and they have been in his care ever since. My father is“cleaning house” and has asked me to sell a few items for him. You would be hard-pressed to find another set for this price in this condition. This is the real deal. I am by no means an expert on machinist tools. But if you have any questions I will do my best to answer them. I can also refer any questions you may have to my father. I have 100% Feedback! Bid with total confidence. Paypal only. The tools will be carefully packaged for ... moreshipment. Shipping& Handling- USA(Lower 48) $10.00 Standard Mail $11.25 Priority Mail I will ship internationally. Please ask for a shipping quote before bidding! Payment expected within 3 days after auction ends. Please do not pay until you receive an invoice. I have no desire to rip anyone off with shipping costs. Final shipping cost will be determined at the end of the auction to give the winner a fair price. Sorry- I do not ship to Mexico. South America or Italy.
|
|
|
Pair Of Magnetic Chuck Parallels 4" x 2" x 1" Fisher Machine Shop
Pair Of Magnetic Chuck Parallels 4" x 2" x 1" Email me with any questions. Posted with
|
|
|
SPI 1/32" thick 10 Pair Parallel Set 1/2" to 1 5/8" tall Pairs
I have for auction a very clean. Slightly used set of 10 pairs of SPI parallels. 1/32" thick by 6" long. 1/2" tall,5/8"3/4" 7/8"1"1 1/8"1 1/4"1 3/8" 1 1/2" 1 5/8" With factory case. See pictures for more info. Very clean! Im gonna say a 9.5 out of 10. Thanks for looking! Posted with
|
|
|
1 SEPARATED) BROWN & SHARPE 750-B MATCHED PAIR V-BLOCKS BEING SOLD SEPARATELY
BROWN& SHARPE 750-B MATCH PAIR V-BLOCKS I AM SELLING THEM SEPERATELY OR IF YOU WANT BOTH AS A MATCHED SET BUY BOTH AND THEY WILL BE SHIPPED TOGETHER! EXCELLENT CONDITION INSPECTION GRADE TOOLMAKER OWNED AND TAKEN CARE OF! INITIALS ON BLOCKS SHIP WT. 3 LBS. EACH For multiple purchases ending within 3 days of each other please hold payment for invoice. To receive combined shipping discount. For auctions ending more than 3 days apart please pay won auctions in full and receive shipping discounts on final sale. There is a small handling fee on all sales, which is included in shipping cost. Multiples to be determined on a case by case basis, upon the number to be packed. I ONLY offer free shipping when listing is marked as such and Best Offers are accepted plus shipping and handling charges, unless otherwise listed. Will send free shipping ... morewith best option UPS or USPS. Please take time to view all photos, read all descriptions, and ask questions if necessary before bidding. Thank You for viewing, bidding and purchasing, GOOD LUCK! Check out my! Be sure to add me to your!
|
|
|
Pair of Ampco W-8 Brass Wedges 1-1/2"X8"
The wedges are used but still in good condition. Shipping international will be additional cost.
|
|
|
MATCHED PAIR OF V BLOCKS & CLAMPS 1 3/4 x 1 5/8 x 1 5/8 MACHINIST TOOLS *D
MATCHED PAIR OF V BLOCKS& CLAMPS 1 3/4 x 1 5/8 x 1 5/8 MACHINIST TOOLS Condition/I n fo: Excellent condition. If you see any brown marks on the blocks that is a preservative oil(not stains) The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& ... moretracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
MACHINIST TOOL MAKERS PARALLELS 5/8" X 1 3/4" X 8 LONG CUSTOM MADE (PAIR)
PREVIOUSLY OWNED. USED, CUSTOM MADE, TOOLMAKERS PARALLELS. SIZE = WIDTH = 5/8" HEIGHT = 1 3/4" LENGTH = 8" HARDENED AND PRECISION GROUND ALL OVER. VERY NICE PARALLELS WITH LIGHTENING HOLES. BEVELED EDGES ALL AROUND. MADE BY A TOOL AND DIE MAKER. MAY HAVE A NAME ENGRAVED ON THEM. PREVIOUSLY OWNED MEANS THIS ITEM IS BEING SOLD AS IS. NO WARRANTY IS EXPRESSED OR IMPLIED. NO EXCHANGES OR RETURNS ALLOWED.
|
|
|
PAIR OF STARRETT V-BLOCKS #278 WITH CLAMPS & BOX 1/4 20 NC
PAIR OF STARRETT V-BLOCKS WITH CLAMPS PART#278 THE BLOCKS ARE MARKED 1/4 20 NC THESE ARE IN GOOD CONDITION SHIPS TO USA ONLY 8% NY RESIDENT TAX
|
|
|
Westhoff 'Mighty Mag' magnetic bases with pair of 3" x 2" x 1" parallel blocks
A vocational trade school has closed its machine shop program. The main shop as well as the affiliated satellite machine shops are in the process of being liquidated. As the items are released for disposition they will be offered for sale. I will do my best to provide an accurate description. But sale is final so please feel free to ask any questions that you might have. Offered here is one the last items from one of the small satellite shops. Here is a set of(3) Mighty Mag mounting bases equipped with a pair of precision parallel blocks. The blocks measure 3" x 2" x 1" and have threaded holes. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13fc5571df3-0xf9-
|
|
|
ALUMINUM PARALLELS, PAIR, MAGNETIC CHUCK, 4-1/4" LONG
USEMAG. Aluminum Parallels Pair, Magnetic Chuck* Length: 4-1/4" Width: 1-3/4" Height: 1" Ground all Over. For use with Magnetic Chucks. In original Box. Excellent Condition with Engraving on End Check out my! New Items Added Daily! We Want Your Business! Griffin World Traders is Veteran Owned. And a Wise Company Authorized Distributor. On Jul-10-13 at 17:18:56 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
(20) PAIR Machinist Thin Parallel s, with Case, Precise, 1/32" Thick, FREE SHIP
20) PAIR Machinist Thin Parallels in a fitted case. Sizes range from 1/2" tall to 1 11/16" tall by 1/16" increments. They are a gunmetal blue color with precision ground tops and bottoms to tight tolerances. The label reads"MN55 UTPS20. 20 Pr 1/32" thin parallel set" No indication of wear shows. They are clean and precise. Visit our eBay store for more great values. Shipping and handling costs for this listing will be FREE within the U.S.A. We will ship internationally if a cost or calculator shows below. Or please inquire for international shipping costs. We will ship promptly and will do all we can to make sure you are satisfied with your purchase. Sales within the state of Michigan will be charged sales tax. Thank you! 0613110 748)
|
|
|
A PAIR of MOORE 123 GAGE GAUGE BLOCKS SET#1 *F
A PAIR of MOORE 123 GAGE GAUGE BLOCKS SET#1*F Info/Size: Very good condition Important travel notice for August- I will be traveling for several weeks in August. If you pay your invoice on time I will ship your item(s) before I leave. If not, your shipment can be delayed for over three weeks. Payment due within 48 hours of auctions close. If you are going to bid on other auctions contact me for a payment extension. Items are used and may have engraving or ID markings that are not original to the tool. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for ... morea great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
Pair 1-2-3 123 BLOCK Set Precision Matched MILL MILLING MACHINIST BLOCKS
THIS IS A HARDLY USED SET OF MACHINIST 1 2 3 BLOCK. HAVE BEEN SITTING IN MY TOOL BOX SINCE 1998. NOT SURE WHO THE MANUFACTURER IS. AS IS. NO WARRANTY.
|
|
|
PAIR OF MAGNETIC TRANSFER MACHINIST BLOCKS ~ 2 X 4 X 1 ~ FREE U.S. SHIPPING
PAIR OF MAGNETIC TRANSFER MACHINIST BLOCKS ~ 2 X 4 X 1 ~ FREE U.S. SHIPPING You are bidding on a PAIR OF MAGNETIC TRANSFER MACHINIST BLOCKS ~ 2 X 4 X 1 ~ FREE U.S. SHIPPING. Any questions or requests are welcomed and will be answered. Usually within 24 hours. Your satisfaction is guaranteed! If you have a problem or need to return a item within 14 days, simply e-mail us and we will do our best to take care of it. It is our goal to provide only the best in customer service. Everything we sell comes from a non-smoking home unless stated but not a pet free home. You can also find out more about us by using the about ME link below. Thank you for considering this item and have a great day. PAYPAL is preferred. If you are making a multiple purchase. Please wait until we send you an invoice before making payment. Payment should be made within 7 ... moredays. Please contact us if you have any questions. FAST HANDLING and EXTRA CARE PACKAGING PLUS FREE U.S. SHIPPING ON MOST ITEMS. We will COMBINE shipping! When buying multiple items. Please wait for us to send you a combined invoice before paying. UP TO 5 MAGAZINES CAN BE SHIPPED IN A"PRIORITY FLAT RATE ENVELOPE" FOR THE PRICE OF 1. THIS IS A GREAT OPTION FOR INTERNATIONAL BUYERS. Please contact us if you have any questions. PAYPAL is preferred. Please make payment or let us know your payment plans within 7 days of the close of this sale. Most items will be shipped within 48 hours after payment is received. We will combine items to save you on shipping costs. We ship all items with delivery conformation. Do remember that although most deliveries take from a few days to a week. The mail can sometimes take a little longer, so please be patient. MICHIGAN RESIDENTS PLEASE ADD A 6% SALES TAX TO YOUR WINNING BID OR BIDS. Doing business here and elsewhere as MotorHeadBooks since August of 2000. Our inventory varies and includes a mix of mostly automotive memorabilia. Collectibles and items that we find interesting. If you have any requests or questions, please contact us. You
|
|
|
Pair V Blocks, 1.1/4 x 1.1/4 x 1.1/4 Starrett 271-A, Case Hdn, No Clamps
Pair V Blocks. 1.1/4 x 1.1/4 x 1.1/4 Starrett 271-A, Case Hdn, No Clamps, exc cond. 3/8 V& 13/16 V on ea block. Replacement cost about $60. I accept bids ONLY FROM U.S.A. 50 states. If you have a NON-U.S. Paypal account& a U.S. address, I WILL NOT ACCEPT YOUR BID& your Paypal payment will be blocked. PA residents of(Allegheny County) Phila County must add(7% 8% sales tax. All other counties in PA must add 6% sales tax. Buyer pays 9.75 for packing, handling, shipping for U.S. 50 state delivery. APO, FPO& others higher. I ship every Wed weather permitting.
|
|
|
PAIR OF MITUTOYO 1" x 2" x 4" MAGNETIC PARALLEL BLOCKS # 181-951
Search Titles and Descriptions Categories Policies Gallery PAIR OF MITUTOYO 1" x 2" x 4" MAGNETIC PARALLEL BLOCKS# 181-951 PAIR OF MITUTOYO 1" x 2" x 4" MAGNETIC PARALLEL BLOCKS# 181-951 PAIR OF MITUTOYO 1" x 2" x 4" MAGNETIC PARALLEL BLOCKS# 181-951 PAIR OF MITUTOYO 1" x 2" x 4" MAGNETIC PARALLEL BLOCKS# 181-951 PAIR OF MITUTOYO 1" x 2" x 4" MAGNETIC PARALLEL BLOCKS# 181-951 Specifications Block Dimensions: 1" x 2" x 4" Long. Item comes as shown. Copyright c 2012 Bid On Industrial. Powered by
|
|
|
Thin Parallel 1/8" 10 Pair Set Machinist Machine Shop Tools
10 Pair Thin Parallel Set Machine Tools You are bidding on One(1) Set of 10 Parallels. This item was previously owned and is in fair condition. Comes in original case. Pieces do have some rust on them. See photos. Product Details All parallels 1/8" thick x 6" long. With one pair of each of the following heights: 1/2" 5/8" 3/4" 7/8" 1" 1 1/8" 1 1/4" 1 3/8" 1 1/2" 1 5/8" Please Look at the Pictures and Feel Free to Ask Questions. Affordable Thrift Buy& Sell Will Always Make time to Answer your Questions and Ensure that You, Our Customer, Will Know exactly what you're Bidding on. This item is for SALE in our store and is listed on other sites so we reserve the right to end the auction at any time. We WILL NOT SHIP outside of the U.S. so Please do not Bid if you are not a U.S. ... moreResident. Call if you have any questions Affordable Thrift Buy& Sell LLC AT 630-766-1166 We are located at 423 East Irving Park Road in Wood Dale 60191. You can ALSO pickup your item at Affordable Thrift Buy& Sell LLC at 423 East Irving Park Road in Wood Dale Illinois 60191. Our number is 630-766-1166 T So don't miss out; buy today. Good Luck! AFFORDABLE THRIFT BUY& SELL LLC
|
|
|
1-2-3 Blocks one pair & one pair of parallels
one pair used 1-2-3 Blocks hardened tool steel home made 1" x 2" x 3" one pair of parallels hardened home made see pictures
|
|
|
A pair of Magnetic Brass / Steel Parallels Suface Grinder 1.5'' x 1'' x 6''+
Magnetic Parallels 1.5 tall 1' wide and over 6' in length. Nice.
|
|
|
Pair of 1-2-3 Machinist Blocks 402-0005
Pair of 1-2-3 Machinist Blocks 402-0005 1" x 2" x 3" Quantity Available: 1 Shipping Weight: 3 lbs(AEE 165 1.12.C L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control ... moreover and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order
|
|
|
MACHINIST PERCISION PARALLEL SET STEEL 10 PAIR 1/8 THIN SHOP PARALLEL BARSS
Machinist"parallels" They do have light to heavy rust scathing. They are in"great condition" they are flat. There are"no" bends. Nicks, ping or dings. These items are"clean" Ten pairs ranging from: 1/8 X 1/2 X 6" to 1/8 x 1-5/8 X 6" Paypal Only
|
|
|
Thin Parallel 1/8" 10 pair Set Machinist Tool w/ Case Good Condition Machine
Description Item: Thin Parallel 1/8" 10 pair Set Condition: This set of thin parallels are in good condition. There is light signs of use. However none are deformed or have excessive wear. They are tools, so scuffing is expected. Overall nice condition. View pictures for greater detail. Size: 1 1/8" x 1/8" x 6" Colors: Metal Comments: This item was previously owned. We are an estate liquidation company and are not experts on any one particular product. So please view photos closely for details and ask questions before purchasing. All items are sold"As-Is, Where-Is" with no warranty implied. Please refer to the terms of our return policy. Buyer pays return shipping. Thank you for looking! We stand behind each listing; our customer ratings are very important to us. We strive to do our best to ensure our customers ... moreare 100% satisfied. So please contact me if you have any questions. Concerns or problems prior to purchase or upon arrival of shipment. View My Other Items For Sale View My Feedback DZ-090413-RCK10 Payment Paypal is the only form of payment we accept. Winner is excepted to pay within 7 days or I will relist the item. Sometimes exceptions can be made but please contact me first. Buyers in California will be charged 8.00% sales tax. Shipping Items are shipped by Fedex Ground or by USPS depending on weight and size of item. We ship daily. Monday through Friday. If you pay for your item before 7:00am Pacific Time, it will ship the same day. Otherwise, it will ship the next business day. International Buyers- Please Note: We offer international shipping on everything we're able to. If an item can be shipped internationally(outside the US and Canada) there will be an advertised shipping rate included in the listing. If you do not see international shipping offered on the listing then the item is too large to ship to your country. Your customs form will include accurate information. Do not ask me to falsify the customs form. Import duties. Taxes, and charges are not included in t
|
|
|
Cast Iron Block Parallels Heavy Duty 12 x 3 x 2 & 2 x 3 x 4 1 pair
Up for auction is a set of Heavy Duty Cast Iron Hollow Block Parallels. 1 Block is 12" x 2' x 3" then there are 3 blocks each 2" x 3" x 4" or when put together they measure 12" I believe these are most likely shop made. They are strong 1/2" thick on 3 sides and 3/8" thick on one side. All of the measurements on Length& width are approx. They are very accurate. They also have a hole drilled through on the short blocks. These are older and have been used. There are some drill marks and a couple shallow holes in them. Doesn't effect performance but they are blemished. Make me an offer! I'm not 100% sure of the value. I am always happy to combine shipping on multiple item purchases whenever possible. Please email me with any questions and thank you for your interest.
|
|
|
Parallel Blocks/123 Blocks Ground Cast Iron with tapped holes 1 pair
Up for Auction is a pair of 123 Parallel Blocks. These are many years old. They been around the shop for at least 30 years. I believe they are ground cast iron. They are accurate. They measure 1" x 2" x 3" Some of the holes in the blocks are tapped. They are in very good condition with just some blemishes from age. I am always happy to combine shipping on multiple item purchases whenever possible. Please email me with any questions and thank you for your interest. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1412ff3d758-0x102-
|
|
|
Pair V Blocks, 1.1/4 x 1.1/4 x 1.5/8, Starrett & Lufkin, Slightly Mismatched
Pair V Blocks. 1.1/4 x 1.1/4 x 1.5/8, Starrett& Lufkin, Slightly Mismatched, 1 Lufkin 905& 1 Starrett 278, stained but not pitted, ea block 1.1/4 x 1.1/4 x 1.5/8, exc cond, 1-V 3/4& 1-V 1/2 on ea block. Replacement cost about $60. I accept bids ONLY FROM U.S.A. 50 states. If you have a NON-U.S. Paypal account& a U.S. address, I WILL NOT ACCEPT YOUR BID& your Paypal payment will be blocked. PA residents of(Allegheny County) Phila County must add(7% 8% sales tax. All other counties in PA must add 6% sales tax. Buyer pays 9.75 for packing, handling, shipping for U.S. 50 state delivery. APO, FPO& others higher. I ship every Wed weather permitting.
|
|
|
Pair of General #116 Vee Blocks and Clamps, 1-1/4" x 1-1/4" x 1-5/8" NIB
A local vocational trade school has closed its machine shop program. The 2nd of the satellite machine shops has been emptied and cleaned. So the items listed over the next few days are the last items of tooling and accessories from this shop. I will do my best to provide accurate descriptions but sale is final so please feel free to ask any questions that you might have. Offered here is a#116 set of Vee Blocks and Clamps mfg'd. by General Hardware(USA) I measure the blocks to be 1-1/4" square x 1-5/8" long. By my inspection these blocks were purchased new and do not appear to have been used. As the box has been opened and the blocks removed and replaced. I represent them as being in used condition.
|
|
|
Pair of 2 1/2" Machinist V Angle Blocks w/ clamp. 2 1/2" long x 2" tall
For Sale: Pair of machinist V angle blocks with clamps. measure 2 1/2" long by 2" tall In good condition Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must ... morebe shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PLEASE NOTE: There is a $10 handling fee
|
|
|
VTG BROWN & SHARPE B&S PROVIDENCE R.I. NO. 750A V-BLOCKS , 1 PAIR (77)
HE'S ARE TOOL NICE MACHINIST TOOL BLOCKS. THEY ARE IN GREAT WORKING ORDER BUT THEY DO HAVE SOME LIGHT SCRATCHES ON THEM. PLEASE LOOK AT PICTURES CLOSELY I GOT THEM FROM A RETIRED MACHINIST. THANK YOU MY EBay policy We post around 20+ items per week so check out our other auctions! Please look at pictures for size is in condition. We buy postage through the eBay system so that all our items are automatically tracked and you are emailed the tracking number. Our items are covered by eBay’s Buyer Protection Program. Attention most of the items are used tools and they may have scratches surface rust or dings on them so if you have any problems or concerns please make sure to message us before you bid or buy thank you. Please submit payment for items within 48 hours. If you experience problems paying. Please message us. We can only ship to ... moreyour eBay address of record. Positive feedback is very important in the eBay universe 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-14130367dc8-0xfe-
|
|
|
Pair Vintage Machinist Set-Up Steel Blocks 2 3/16" x 1" x 1 1/8" cut 3/8"
Two Vintage Machinist Set-Up Steel Blocks. See photos for details of construction. Approximate dimensions: 2 3/16" x 1" x 1 1/8" cut 3/8" These items are from my Grandfather's cherished possessions. A Machinist/Master Tool& Die for Revell Models for over 50 years. I will be listing these items for the next four weeks. Check out my! Thank you for taking a look at my auction. I do my best to describe what I have to offer. I try to take decent photographs to represent the item. See photos for detailsPlease Note: The photos with this listing are part of the description for this item. Photos are of the actual item and have not been touched up to cover any flaws. I will combine shipping Shipping is tricky these days. With flat rate boxes and so on. I try to be fair with shipping. If I have over charged for shipping more ... morethan a few bucks, I will refund the money on Paypal. I sometimes used recycled boxes or envelopes. I try to also recycle popcorn and bubble wrap. To save the customer money and the environment. Please feel free to email with any and all questions.
|
|
|
Pair Matching V Blocks,1.1/4 x 1.1/4 x 1.5/8. ea V 1/2 & 13/16 Starrett no. 278
Pair Matching V Blocks. 1.1/4 x 1.1/4 x 1.5/8. ea block w/ V 1/2& 13/16 Starrett no. 278 extra fine cond, 1 sm wipe mark on top of 1 block, negligible. Replacement cost about $175. I accept bids ONLY FROM U.S.A. 50 states. If you have a NON-U.S. Paypal account& a U.S. address, I WILL NOT ACCEPT YOUR BID& your Paypal payment will be blocked. PA residents of(Allegheny County) Phila County must add(7% 8% sales tax. All other counties in PA must add 6% sales tax. Buyer pays 9.75 for packing, handling, shipping for U.S. 50 state delivery. APO, FPO& others higher. I ship every Wed weather permitting.
|
|
|
BROWN & SHARPE NO. 920 PARALLELS , 1/4 x 1/2", PAIR
GOOD CONDITION.
|
|
|
IMPORT 637-7538 1"-1-3/4" 4 Pair Precision Parallel Set W/ Wooden Case 1T
◊◊◊◊◊ IMPORT ◊◊◊◊◊ 637-7538 Precision Parallel Set 4 Pair 8 Piece 1” Minimum Height 1-3/4” Maximum Height ½” Maximum Thickness 0.0010” Accuracy 0.0003” Parallelism 55-62c Hardness Retail Over $160! FREE PRIORITY MAIL SHIPPING! THIS LISTING INCLUDES ONLY THE ITEMS SHOWN IN THE PICTURES Local pick up is always welcomed. Our goal is satisfied customers! If there is anything we can do. Please just ask.
|
|
|
PAIR OF SCHERR MAGNETIC BLOCKS W/ WOODEN CASE 1" X 1-3/4" X 3-7/8"
Pair of George Scherr Magnetic Blocks w/ Wooden Case Magnetic Blocks Measure: 1" x 1-3/4" x 1-7/8" Includes Wooden Case Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
NICE!!! PAIR OF PRECISION 123 BLOCKS - 1" x 2" x 3"
aims NICE! PAIR OF PRECISION 123 BLOCKS- 1" x 2" x 3" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 2 Precision 123 Blocks in GOOD condition. Features: Useful in mounting work for precision grinding. Layout work, etc. Blocks are hardened and ground. Specifications: Holes Inside Diameters: 3/8" Length: 3" Width: 2" Thick: 1" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! PAIR OF PRECISION 123 BLOCKS- 1" x 2" x 3" Reliable Tool Inc. c 2011 | Powered by lm3vhp.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-141e5126b31-0x101-
|
|
|
Pair of Machinist Set -Up Vee V-Blocks & 1 Clamp - Free Ship! (0348)
Pair of Machinist Set-Up Vee V-Blocks& 1 Clamp- Free Ship! 0348) Move mouse over images to see larger version Click to view supersized image This Machinist V-Block set is in good working order and ready for your use. Included is one user-made clamp that I had laying around. It reasonably well fits the blocks. These blocks have no manufacturer's identificaiton. As least none I could find. Approximate size is 1-1/2" square(height/ width) Pl ease refer to the photos. They are an im portant part of the description. I have tried to include many views so you can get an accurate understanding of the age and condition of this item. Please e-mail me if you have questions or require additional photos. Thanks for looking and good luck! Ref nr. 0348] My Guarantees to You: Guaranteed Prompt Shipping: Your purchase will normally be shipped ... morewithin 1 business day of payment. Guaranteed Quality Packaging: Your purchase will be carefully packaged to ensure it arrives undamaged. Guaranteed Delivery: Your purchase will be shipped to you using traceable delivery. Thanks for your interest in DDWH Antique Tools& More*
|
|
|
PAIR OF UNKNOWN SHOP MADE MACHINIST'S STEEL V - BLOCKS 2" x 2 1/2" x 2 7/16"
PAIR OF UNKNOWN MAKER SHOP MADE MACHINIST V BLOCKS- 2" TALL x 2 7/16" WIDE x 2 1/2" LONG. THEY ARE IN VERY GOOD USED CONDITION WITH NOTHING DAMAGED OR BROKEN. PLEASE LOOK OVER PICTURES& USE THE ZOOM FEATURE FOR A GOOD CLOSE UP LOOK. IF YOU HAVE ANY QUESTIONS FEEL FREE TO CONTACT ME WITH THEM. I WILL BE LISTING A LOT OF OTHER METAL WORKING& MACHINIST TOOLS OVER THE NEXT FEW WEEKS. THERE IS A LOT OF THEM SO SAVE ME AS A SELLER& CHECK DAILY FOR NEW ITEMS LISTED. $9.95 SHIPPING TO THE LOWER 48 U.S. STATES. THANK YOU FOR LOOKING!
|
|
|
PAIR OF SMALL PARALLEL BLOCKS CLAMPS PARALLELS 3x.88x.75 MACHINIST TOOLS *1
PAIR OF SMALL PARALLEL BLOCKS CLAMPS PARALLELS 3x.88x.75 MACHINIST TOOLS*1 Info/Sizes: Good condition I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used and there may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. If you are going to bid on other auctions contact me for a payment extension. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote ... moreto have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
PAIR OF MACHINIST'S STEEL BLOCKS 2" X 1 1/2" X 3/4"
aims PAIR OF MACHINIST'S STEEL BLOCKS 2" X 1 1/2" X 3/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Coming out of a one man mold& die prototype shop. A true craftsman. Everything this tool& die maker owned was very well taken care of and shows very little wear compared to a production shop. Be sure and check out our other auctions for some of the best names in tooling like: DoAll, Bridgeport, Mitutoyo, Suburban, Hardinge, Tapmatic, Precision Plates& Fixtures he made, and much more! Most of the items are exceptionally clean. All items are NO RESERVE and NO MINIMUM. Everything will sell at end of auction, so be sure to get your bids in! Good Luck! These are 2 Heavy Duty Machinist's Steel blocks in good condition. Specifications Overall Dimensions: ... more2" X 1 1/2" X 3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF MACHINIST'S STEEL BLOCKS 2" X 1 1/2" X 3/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
MACHINIST TOOLMAKER PARALLEL BARS HARDENED 1-3/16 X 1/4'' X 6'' PAIR
MACHINIST TOOLMAKER PARALLEL BARS HARDENED. 1-3/16' X 1/4' X 6' PAIR. NICE PARALLELS WITH LIGHTING HOLES. FROM THE TOOL BOX OF A RETIRED MACHINIST.
|
|
|
Pair Of 1-2-3 Blocks. MSC Import Brand. Matched Pair.
Used pair of matched 1-2-3 blocks in good condition. These are used. So there is some grime in the holes. Posted with
|
|
|
Set (10) PAIR Machinist Matched Parallel Set, 1/2" to 1 5/8" tall by 1/8",w/ Box
Set of(10) PAIR Machinist Matched Parallels. The set starts at ½” tall and goes to 1 5/8” tall by 1/8” Increments. They are all 1/8” thick and 6” long. Each has the size on it along with“China” The tools are bright and in excellent condition. A couple of the pairs has some superficial staining in spots. Otherwise they are bright and shiny. The wooden box is original and in excellent condition with a locking hasp. Visit our eBay store for more great values. Shipping and handling costs for this listing will be $12.95 within the U.S.A. We will ship internationally only if a cost. Or international shipping calculator, shows below. We will ship your order promptly. Sales within the state of Michigan will have sales tax added to the total. Thank you! 0114) lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-143cadf4043-0xd5-
|
|
|
Pair Large Parallels. Each ½” x 1 7/8” x 12”
800x600 800x600 800x600 800x600 800x600 800x600 800x600 800x600 Pair Large Parallels. Each ½” x 1 7/8” x 12” Good useable condition as shown in pictures; Minor rust staining; Normal wear and tear. Buyer to pay shipping on 7 pounds. I will gladly combine items for lowest cost shipping. I accept PayPal and other reasonable methods of payment. Please check out my other auctions for more tool bargains. Thanks. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ... moreNormal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
|
|
|
STARRETT 271C V-BLOCK MATCHED SET (1 PAIR) WITH CLAMP & ROD 1-1/4" CAPACITY
STARRETT 271C V-BLOCK MATCHED SET(0537) WITH CLAMP& ROD: 1-1/4" CAPACITY THIS V-BLOCK SET IS USED. BUT IN VERY GOOD CONDITION. THE BOTTOMS OF BOTH BLOCKS HAVE SOME CHECKER MARKS(FROM A VISE? THE MARKS ARE LAPPED FLAT AND DO NOT AFFECT DIMENSION OR FUNCTION. THIS SET INCLUDES: 2- CASE HARDENED STEEL V-BLOCKS 1- STEEL FORGED CLAMP 1- 6" STEEL ROD 1 EACH- STARRETT DECIMAL AND METRIC EQUIVALENT CHARTS THE ITEMS LISTED ARE STORED IN A PET/SMOKE FREE HOME. PLEASE REVIEW ALL IMAGES FOR DETAILS AND CONDITION. THE ITEMS PICTURED ARE THE ITEMS YOU WILL BE RECEIVING. PAYMENT MUST BE MADE WITHIN 2 DAYS OF AUCTION CLOSE. ALL SALES ARE FINAL. ITEMS LISTED FOR AUCTION ARE SOLD" AS-IS" ALL INFORMATION PROVIDED IS ACCURATE TO THE BEST OF MY KNOWLEDGE. PLEASE READ THE DESCRIPTION CAREFULLY. FEEL FREE TO ASK ANY QUESTIONS. I WILL ONLY ... moreSHIP TO A UNITED STATES. CONFIRMED PAYPAL ADDRESS. I TAKE GREAT CARE PACKING YOUR ITEM; FREE SHIPPING INCLUDES TRACKING AND INSURANCE. IF THERE IS A PROBLEM. PLEASE CONTACT ME PRIOR TO POSTING ANY NEGATIVE FEEDBACK. CHECK OUT MY OTHER AUCTIONS. THANKS FOR LOOKING! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Machinists V Blocks / Hold Downs Matching Pair Length 2 3/8 Ht. 1 7/8 W. 1 7/8
No Makers Marks Although The Previous Owner Has Name Etched On Blocks, All Parts Move Free And Easy Some Light Rust And A Few Light Scuffs On V Blocks, Nice Pair Of Matching Blocks 2 3/8 x1 7/8 x 1 7/8 In. No International Shipping Payment Pay Pal Shipped USPS Small Flat Rate padded Envelope 5.85,
|
|
|
Pair of 1-3/8" V Blocks 8 659
The blocks are used and show some normal wear but still in good condition. Shipping international will be additional cost.
|
|
|
PAIR OF MAGNETIC V BLOCKS 2 1/2 X 1 1/4" X 2 3/8"
PAIR OF MAGNETIC V BLOCKS 2 1/2 X 1 1/4" X 2 3/8" V: 2" Size: 2 1/2 X 1 1/4" X 2 3/8" 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1440c5e9cee-0xf0-
|
|
|
Pair 1 2 3 BLOCK Hardened toolmaker machinist vise set up mill machine shop made
Pair of 1 2 3 BLOCKS USA toolroom machine shop made as shown in photos. Made from air hardened tool steel. Approx. 60 Rockwell hardness. Squared up and ground together on a surface grinder. There are 2 small edge areas on one block. see 2nd and 3rd photos) that didn't quite clean up but these edges still measure 3.000" Name stamped in undercuts as shown in photo. See my other machinist tools Combined shipping discount.
|
|
|
1 PAIR OF V-BLOCKS (~ 1-1/2 X 1-1/2 X 1-3/4) WITH CLAMPS
1 PAIR OF V-BLOCKS(~ 1-1/2 X 1-1/2 X 1-3/4) WITH CLAMPS CONDITION: Used– Normal Wear and Tear Good Working Condition– See Photos- OWNER MARKINGS Will Combine Shipping– Request Invoice All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a shipping difference that money will be immediately refund. Please e-mail with questions.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14461179704-0x10d-
|
|
|
MACHINIST PARALLELS PAIR 1/4 X 3/4 X 6" LONG
THIS IS A PAIR OF MACHINIST PARALLELS SIZE 1/4 X 3/4 X 6 INCHES LONG IN EXCELLENT CONDITION. FREE SHIPPING.
|
|
|
Pair of 5" Machinist 1-2-3 Go Blocks w/ 11, 9/16" holes. Great condition
For sale are two machinist 1-2-3 blocks. Each block is 15" x 6" x 2" and has 11 vertical holes that measure 9/16" in diameter. They also have 9 horizontal screw holes and 5 slots that measure 1 3/4" x 3/4" They are in great condition. One of them has a couple of very small dings on the edge so small you can barely tell they are there by running your hand over them. Please take a close look at the pictures and feel free to contact me with any questions Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. ... moreAn 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provi
|
|
|
SHARS 2" x 6" x 3.54" Magnetic V-Holders 1 Pair (2 PCS)
SHARS 2" x 6" x 3.54" Magnetic V-Holders 1 Pair(2 PCS) No return allowed. The reason we markdown this item is: There are 2 slightly scratches on the corners as the picture showing 202-6068R. Holding Power: 50lbs, Width: 2" Length: 6" Height: 3.54" Max hold Dia. 5" Parallel to 0.0005" Centered 90 degree V Practical precision finish holder, Highly useful in scribing off round bars. Grinding, cutting and finishing operations, Precision ground flat square, Powerful ground Magnetic"V" surfaces make holding any shape work piece fast and easy, Lever operated on-off switch, Matched pair, We have other blocks available at All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Please ... moredirect any questions to our eBay Message Box. PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
|
|
|
(3) PAIR Machinist Parallel s, 1/2" x1"x 6", 7/16" x1 1/2"x 6", 3/4" x1 1/2"x 4"
3) PAIR Machinist Parallels. 1) pair 1/2" x 1" x 6" 1) Pair 7/16" x 1 1/2" x 6" 1) Pair 3/4" x 1 1/2" x 4" The Orange sets are hardened and precision ground. Some spotting and toning noted. RON" is stamped on each piece. The red pair look like they used to be 1 tool cut in half. 1 face of these is rusty. This set is not hardened and can be dusted off on your grinder to make them perfect again. All these sets can be used 2 ways as they are ground on 4 sides. Visit our eBay store for more great values. Shipping and handling costs for this listing will be $6.95 within the U.S.A. We will ship internationally only if a cost. Or international shipping calculator, shows below. We will ship your order promptly. Sales within the state of Michigan will have sales tax added to the total. Thank you! 01140239)
|
|
|
MACHINIST PARALLEL SET 1/8" 10 PAIR MISSING ONE OF THE SET (1/2) ¦
MACHINIST PARALLEL SET 1/8" 10 PAIR MISSING ONE OF THE SET(1/2) PLEASE REVIEW PICTURES FOR MORE DETAILS AND INFO ON CONDITION. THE ITEM(S) IN THE PICTURES WILL BE THE ITEM(S) YOU WILL BE RECEIVING. EVERYTHING AND ONLY WHAT IS IN THE PICTURES IS INCLUDED. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL ... moreTRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
|
|
|
MATCHED PAIR of V-BLOCKS machinist tools 2 x 1.5 x 1.5 inches *1
MATCHED PAIR of V-BLOCKS machinist tools 2 x 1.5 x 1.5 inches info/sizes: Good condition I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. ... moreVisit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
1 PAIR OF PRECISION 1-2-3 BLOCKS 1" X 2" X 3" GRINDING INSPECTION MILLING
1 PAIR OF PRECISION 1-2-3 BLOCKS 1" X 2" X 3" USED FOR GRINDING. INSPECTION, MILLING, SET UPS THIS SET IS IN NICE USABLE CONDITION. UN MARKED MAKER CHECK OUT MY OTHER ITEMS LOTS OF DIFFERENT COOL STUFF Any questions. Please ask prior to bidding. THANK YOU IN ADVANCE
|
|
|
MACHINIST'S TOOLMAKER'S PRECISION 1 2 3 BLOCK S 4 PIECES 2 PAIR
WILL NEED A GOOD POLISHING. ALL QUESTIONS WELCOMED BEFORE BIDDING*PLEASE NOTE*I AM NOT AN EXPERIENCED MACHINIST AND MOST OF THESE ITEMS HAVE BEEN ACQUIRED FROM A RETIRED MACHINIST AND MAY NEED CLEANING.MAY HAVE SOME PITTING OR LIGHT SURFACE RUST,MAY BE INSCRIBED WITH INITIALS& S,REGROUND OR ALTERED,MAY NEED FURTHER METICULOUS CLEANING,MAY NOT BE FULLY ACCURATE AND MAY BE CHIPPED.NEED SHARPENING AND MAY HAVE DUPLICATE SIZES BUT MOST ITEMS SHOULD BE USABLE(UNLESS OTHERWISE INDICATED)AND GOOD FOR AN APPRENTICE OR A SECOND TOOL TRAY AROUND THE LATHE OR MILL OR FOR THE BASEMENT NIGHT SHOP*PLEASE FEEL FREE TO ASK ANY QUESTIONS ABOUT SIZES OR CONDITION OR ANYTHING AND PLEASE CHECK OUT MY OTHER CUTTING TOOLS,TOOLING,TOOL HOLDING,COLLECTIBLES AND OTHER USABLE STANLEY STARRETT,BROWN& SHARPE,LUFKIN ETC MACHINIST'S TOOLS AND OTHER TRADE TOOLS& ... moreEQUIPMENT BY CLICKING BELOW OR ABOVE ONTO"VIEW SELLERS OTHER ITEMS"Please Check out my! NOTE*MORE TOOLS AND STUFF FOR AUCTION IN UPCOMING WEEKS*NOTE*AS ALWAYS MULTIPLE PURCHASES WILL DECREASE ALREADY LOW SHIPPING COSTS.PLEASE READ BELOW* IF YOU WOULD LIKE TO CARRY OVER A PURCHASE FROM ONE WEEK TO THE NEXT TO SAVE SHIPPING THAT'S FINE BUT I WILL REQUIRE PAYMENT ONLY ON ITEMS PURCHASED WHILE HOLDING TO KEEP MY EBAY UP TO DATE.THANK YOU FOR YOUR UNDERSTANDING* INSURANCE MAY BE REQUIRED ON SOME PURCHASES* ALERT*SAVE MONEY $$$$$$$$$$ ESPECIALLY TO COMBINE SHIPPING ON MULTIPLE PURCHASED ITEMS IF ITEM(S) FIT IN THE SMALLEST USPS PRIORITY FLAT RATE BOX OR ENVELOPE I WILL SHIP IT FOR $5.75(UNDER 4 POUNDS)A MEDIUM FLAT RATE PRIORITY BOX $11.00. LARGE FLAT RATE PRIORITY BOX $16.00.IN USA ONLY $$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$SAVE.SEE USPS ON LINE FOR BOX SIZES*FOLD OUT RULER PICTURED NOT INCLUDED AS AN ITEM IN THE LOTS.FOR REFERENCE ONLY* Posted with the
|
|
|
Pair of Machinists 1-2-3 Steel Inspection Blocks
Pair of machinists 1-2-3 steel inspection blocks. Excellent used condition. Please see my other auctions for additional used machine tools. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14512167d19-0x109-
|
|
|
MATCHED PAIR 1-2-3 BLOCKS - 23 HOLES and 1 PARALLEL - 11 HOLES, Good Cond., Used
MATCHED PAIR 1-2-3 BLOCKS- 23 HOLES and 1 PARALLEL- 11 HOLES. BLOCKS: Cross drilling design allows for efficient use of lower weight with maximum strength, Dimensions- 1" x 2" x 3" 2.1 lbs. weight, 23 included 5 threaded holes for clamping and 18 untapped holes, Payment Methods: You may pay instantly with PayPal by clicking the pay now button at the top. And all credit card options are available with Pay Pal. Credit cards: If your trying to purchase via Phone or E-Mail. Visa. Master Card, Discover ONLY. American Express only accepted with PayPal. 509-327-5544 M-F 9-6pm Pacific Time. Ask for Donny. Payments with PayPal and Credit Card orders will ship upon receipt of payment or after being cleared by Pay Pal. Pay Pal Check payments may take up to 4 days to clear Pay Pal and then shipped per Pay Pal Policy. Terms: Buyer assumes ... moreall risk of liability with respect to the purchase and use of the product/item. ALL USED TOOL SALES ARE FINAL and NO RETURNS. If you have a damaged product from shipping or not functional as describe. We must be contacted within 72hrs to process your claims. Buyer is responsible for all shipping charges and Subjet to a Restocking fee. Unless Specified by Doughboys Tools& Equipment. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary. But are the same product. Items are described to the best of our ability to be content accurate. Payment is expected within 14 days of auction close. We can not guarantee availability of product if you are past 14 days& items is re-listed. Shipping: SAVE on SHIPPING Combined shipping ONLY when multiple items are purchased in your shopping cart as per E-Bays New Shipping policy’s as summer of 2013. Any additional item paid and shipped together with the first one. The discount will only show when you REQUEST INVOICE after your last bid and based on all items in your shopping cart. BULKY AND HEAVY ITEMS MAY BE EXEMPT FROM COMBINED SHIPPING DO TO BOX SIZE& WEIGHT. WE SHIP FASTER AND WITH BETTER P
|
|
|
PAIR OF SPI MATCHED V-BLOCKS WITH CLAMPS,3 3/4 X 1 3/4 X 2 1/2 INCHES,STEEL
HERE IS A MATCHED PAIR OF 3 INCH SPI STEEL V-BLOCKS WITH CLAMPS. THEY HAVE BOX SAT FOR YEARS AND ARE IN EXCELLENT CONDITION WITH NO NAMES AND NO CUT,KNICKS OR ANY PROBLEMS, JUST LIKE NEW AND READY TO WORK NOW, ORIGINAL BOX WITH NO TOP ALSO. DUAL V SLOTS AND A ASSET TO ANY TOOLMAKERS BOX, SO PLEASE CHECK OUT THE PICTURES AND ASK ANY QUESTIONS YOU MAY HAVE,THANKS FOR LOOKIN AND ENJOY.
|
|
|
Matched Pair Magnetic 1”x 2”x 3” Blocks Parallels Grinding Chuck
description Welcome to My Auction Old or New and everything In Between You are looking at a set of matching Magnectic Parallels. They are 3.051 inches long by 2.025 inches wide by.942 inches thick. Both blocks have 24 plates not including the end plates. They should hold nicely on a Magnectic Chuck. The pictures below show both sides of the match pair of parallels. Also as can be seen in the picture one block has indent. This does not affect the flatness or being parallel as they have been ground since then. Package size 9"x5.5"x2" and weight 6lb. Will use small USPS flat rate box = $5.80. Will be carefully Packed for Safe Shipping. Any Questions please ask. Thank you for looking and hope to see your bid.
|
|
|
PAIR OF PRECISION MACHINIST'S PARALLELS - 9" x 2-1/2" x 1"
This is a Pair Precision Machinist's Parallels in good condition. SPECIFICATIONS: Parallel Dimensions: 9" x 2-1/2" x 1" thick Overall Dimensions of Case: 11-5/8" x 5-1/2" x 4-1/2" high Comes exactly as shown in pictures.
|
|
|
Vintage Pair of Machinist V Blocks with Clamps Lathe Grinding Tool 2 1/4"x1 7/8"
Vintage Pair of Machinist V Blocks with Clamps. Blocks are 2 1/4" long and 1 7/8" wide and deep. V groove appears to be 7/8" deep. Each block weighs 1 lb 8 oz. 2 clamps- 1 has 2 1/4" threads. Other has 2" threads. Both turn freely with no play. Not familiar with these tools- cleaning out toolboxes. Please ask any questions. Additional photos gladly provided. No maker stamps that I can find. These appear to be made from quality stainless steel. Flat Rate shipping of $7.00 to US only. Thanks for looking! Please check our other machinist tool listings. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
PAIR OF 1-1/4" & 1-1/2" CAPACITY PRECISION V-BLOCKS
Pair of Precision V-Blocks 1-1/4" 1-1/2" Capacities Blocks Measure: 5" x 3-1/2" x 2-3/4" No Reserve! Check my other auctions for mor e quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I ... moref you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
PAIR OF TOOLMAKER'S MAGNETIC TRANSFER PARALLELS 3/4 x 1 x 5 1/2
Pair of toolmakers magnetic parallels, 3/4 x 1 x 5 1/2 great shape. Strong magnetism. Will combine shipping. Check my other ads.
|
|
|
Vintage V-Block Set Matched Pair Machinist Tool 1-9/16'' X 1-5/16'' X 1-5/16''
Vintage V-Block Set Matched Pair Machinist Tool. BLOCKS MEASURE 1-9/16' X 1-5/16' X 1-5/16' APPROX. BOTH BLOCKS SHOWS SHOP ENGRAVINGS. OFFERED AS SHOWN IN THE PICTURES.
|
|
|
PAIR OF MACHINIST SET UP BLOCKS step block milling tool 4" x 3" x 1 1/4" CAD 4SB
2 Good Used MACHINIST STEP BLOCK Cad USA Approx. Dimensions: 4" x 3" x 1 1/4" 6 steps Powered by The free listing tool. List your items fast and easy and manage your active items. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-146a6f7075e-0x111-
|
|
|
AFLA # VB-67633, 3" Cast Iron VEE Block 1 Pair Matching # 2 Numbers (USED)
USED AFLA#VB-67633 3" Precision VEE Blocks Matching#2 Numbers Lot of 2 Came from a closed machine shop that I purchased inventory from just what is pictured Please email me with any questions or pictures you may need before you buy
|
|
|
MATCHED PAIR of 1 2 3 BLOCKS machinist tools *A7
MATCHED PAIR of 1 2 3 BLOCKS machinist tools info/sizes: Some stains and very small grinding marks. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. ... moreI will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
1 Matched Pair of Precision 1-2-3 Blocks, 3/8 inch Tapped Holes
This has some grind marks on it(as pictured) These marks do not affect flatness.
|
|
|
MACHINIST LATHE MILL Matching Pair of 1 2 3 Hold Down Block s Hardened Ground
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1
|
|
|
USED PAIR PRECISION BLOCKS 15-3/4" X 7" X 2-1/4"
SHIPPING INFORMATION: Shipping Weight: 140 LBS. Shipping from San Bernardino. Ca 92407 Handling Fee: $2.00 per package SIGNATURE AT DELIVERY IS REQUIRED FOR ALL PACKAGES! SHIPPING ADDRESS NEEDS TO BE PAYPAL VERIFIED We only ship within the United States. We ONLY use UPS& US POSTAL for all our shipping needs. Please call us to get a shipping + packaging charges before bidding/finalizing your transaction. BID w/ CONFIDENCE& GOOD LUCK! Questions:Use"Ask Seller a Question" Link PAYMENT INSTRUCTIONS: All payments must be received within 2 business days of auction end. If there has been no contact/payment from the buyer within 3 days after the auction ends. NPB will be filed and the item will be re-listed. Buyers are responsible for paying Sales Tax if in California CUSTOMER SERVICE: We do our best to present accurate information ... moreabout every item we sell. If you have any questions. Use the"Ask Seller a Question" Link before placing your bid. RETURNS: We offer a 14 day return policy for this item from the time of delivery. After 14 days no refunds and returns will be accepted. Buyers will pay for return shipping to our location.
|
|
|
U.S.A. Made! Pair of ToolMatic & Other 1" x 2" x 3" 1-2-3 Blocks
Welcome to ThePlaceToBuy1984! Call Us@ 909-544-8882 The Item You Are Bidding On Is a Pair of 123 Blocks in Good Condition. Item Features& Specifications: Hole Diameter: 11/16" Overall Dimensions: 1" x 2" x 3" Item Comes Exactly as Shown in Pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. This Will be Final on all Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction.
|
|
|
Pair Large Parallels 1 7/8 x ½ x 12 Inches.
800x600 800x600 Pair Large Parallels 1 7/8 x ½ x 12 Inches. Quite well used as shown in pictures; Serviceable. Buyer to pay shipping on 7 pounds. I will gladly combine items for lowest cost shipping. I accept PayPal and other reasonable methods of payment. Please check out my other auctions for more tool bargains. Thanks Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-146ed943b17-0x106-
|
|
|
PAIR OF PRECISION MULTI CAPACITY V-BLOCKS W/ CLAMP 3/4" & 1-1/4" CAP
Pair of Precision V-Blocks w/ Clamps Multi-Capacity Blocks Hold 3/4" 1-1/4" Measure 1-3/4" x 2-3/4" x 1-5/8" H Includes Clamps Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end ... morenotice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Pair Vintage Lufkin Rule No. 905 1-5/8" x 1-1/4" x 1-1/4" V-Blocks
This is a vintage(Ca. 1050s) pair of Lufkin Rule No. 905 V-Blocks. They are 1-5/8” long and 1-1/4” square. They have spotting from laying in inventory– I only have one clamp. They are still in very usable condition. This is a nice addition to your metalworking tooling. The willing bidder will pay shipping and handling. I will combine shipping with other items I have listed in order to hold down shipping costs.
|
|
|
PAIR OF HEAVY DUTY V-BLOCKS W/ CLAMPS 1-3/8" & 1-5/8" CAPACITIES
Pair of Heavy Duty V-Blocks w/ Clamps 1-3/8" 1-5/8" Multi-Capacity V-Blocks Includes Clamps Blocks Measure 3-1/2" x 4-7/8" x 2-3/4" No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you ... morepay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
STARRETT #271 V-BLOCK PAIR, Matched Set, 1-1/4", + Clamp, NO RESERVE!
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! STARRETT#271 V-BLOCK PAIR. Matched Set, 1-1/4" + Clamp, NO RESERVE! This is a NO RESERVE auction for a pair of used Starrett#271 1-¼” V-blocks. With one clamp. The numbers(369) match on each block. They are in good condition, and ready to use. Get a deal on a nice pair of V-blocks! Condition: Used See listing. andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Fixed Shipping Charges. Shipping Carrier Domestic Usps Priority Mail Small Flat Rate Box $5.80 I will ship to: United States Customer Service Policy: Will combine with other items when possible. Items generally shipped immediately after payment. Occasionally if I'm out of town or if there is a storm, there may be a delay. For overseas shipments: contact seller. ... morea pretty image. templates with Vendio Sales Manager. Vendio provides powerful selling automation for sellers of all sizes. On Jul-20-14 at 20:06:03 PDT. Seller added the following information:
|
|
|
PAIR OF HEAVY DUTY PRECISION V-BLOCKS 3-1/8" CAPACITIES
Pair of Heavy Duty Precision V-Blocks 3-1/8" Capacities Cast Iron Composition Measures 6" x 2-1/2" x 3-1/2" Steel Measures 3-3/8" x 3-1/2" x 2-1/2" No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced by us- do NOT pay eBay ... moreauction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
2 BLOCKS FIXTURES PARALLELS 5-3/8 x 1-7/8 x 1-7/16 pair weights 6 lbs *9
See my other auctions for more blocks& fixtures I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see ... moreother great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14777dbd3ae-0x10a-
|
|
|
PAIR OF ECLIPSE No. 230 PRECISION MACHINIST'S V-BLOCKS WITH (1) CLAMP
Here for your consideration: PAIR OF ECLIPSE No. 230 PRECISION MACHINIST'S V-BLOCKS WITH(1) CLAMP Approximately 2" long. 1 1/2" wide& 1 1/2" tall I have a friend who recently had a triple by pass. He told me it's time to sell off his machinist's equipment& enjoy some time with his family. I will be listing more items as he brings them. Please check back again. No need to scroll through page after page. Go to my Ebay store then just use the menus to find items of interest to you. Easy as pie! Excellent used condition. A couple of knicks at the bottom of one V. I am not an expert in this area but please feel free to ask questions. Shipping& Handling U S A. $6.80 USPS Priority mail( I only get across the border once a week. So it may start out slower but you will still get it quickly) Canada. $12.99- $20.99 ... moreCPC Depending on Postal Code Be sure to add me to your favorites list! Check out my other items! Payment is required in full within 5 days of listing end. Methods of payment: Paypal Thanks for your interest Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1/8" PRECISION MACHINIST PARALLEL SET - 10 PAIR Minus 1 (19 pcs.) total
1/8" PRECISION MACHINIST PARALLEL SET- 10 PAIR Minus 1(19 pcs. total- there is not a top to the box. Both the box and the parallels could use a good cleaning as both are out of a shop and are dirty. These are sold as is. No returns& NO RESERVE! Save money with these.just clean them up! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-147b28b3164-0x113-
|
|
|
MACHINIST ,TOOL MAKERS SETUP BLOCKS,CUBES,1 PAIR
3" x 3" x 4"L
|
|
|
MACHINIST LATHE MACHINING TOOLS SUPER NICE PAIR OF 1 2 3 BLOCKS
UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS PAIR OF 1 2 3 BLOCKS VERY GOOD WORKING CONDITION. MINOR USE IF ANY*PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST ... moreI CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible.
|
|
|
AVENGER TOOL AT-PSTC-1/8 1/8" x 1/2" - 1-5/8" x 6" 10 Pair Thin Parallel Set 1Z
◊◊◊◊◊ AT-PSTC-1/8 Thin Parallel Set 10 Pairs 1/8" Thickness 6" Length 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" Height Alloy Steel 55-62 Rc Hardness 0.0003" Parallelism In Molded Plastic Case I can't get the latch to close on the case RETAILS OVER $143.00! FREE PRIORITY MAIL SHIPPING! THIS LISTING INCLUDES ONLY THE ITEMS SHOWN IN THE PICTURES Local pick up is always welcomed. Our goal is satisfied customers! If there is anything we can do. Please just ask.
|
|
|
IMPORT 637-7030 1/8" x 1/2" - 1-5/8" x 6" Matched Pair Precision Parallel Set 1M
◊◊◊◊◊ 637-7030 Thin Parallel Set 10 Matched Pairs 1/8" Thickness 6" Length 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" Height Alloy Steel 50-54 Rc Hardness 0.0008" Parallelism 0.001" Accuracy In Molded Plastic Case I can't get the latch to close on the case RETAILS OVER $91.00! FREE PRIORITY MAIL SHIPPING! THIS LISTING INCLUDES ONLY THE ITEMS SHOWN IN THE PICTURES Local pick up is always welcomed. Our goal is satisfied customers! If there is anything we can do. Please just ask.
|
|
|
MACHINIST,TOOL MAKERS HOLD DOWNS , PARALLELS , 1/2"W x 1 1/2"H x 6"L , 1 PAIR
VERY GOOD CONDITION. HAVE OWNERS MARKS.
|
|
|
Machinist One Pair (2) 1/2"x1"x6" Parallels Blocks Precision
Up for sale is one pair(2) of 1/2"x1"x6" machinist parallels. These are of unknown origin. There are no markings to indicate manufacturer. Excellent condition. Shows some wear from being used in the shop, a little dirty and few nicks and scratches. The previous owner's initials are engraved on each of them, viewable in the pictures. Very solid, very nice. Please note that all items are sold‘as is’ and are described to the best of my ability. Including any perceived flaws, so be sure to read the condition description carefully and examine pictures closely to judge for yourself prior to bid or purchase. Any requests for additional pictures or information should be directed towards me prior to bid or purchase. Good luck! Terms and Conditions Payment: Payment is accepted through PayPal only and required within three calendar ... moredays of auction. Buy it now or best offer purchase. Non-payment with no contact after three calendar days will result in escalation through eBay. If there is a problem with payment. Please do not hesitate to contact me. I am very reasonable and will gladly work with you towards a mutually beneficial resolution. Shipping and Handling: Unfortunately I do not offer international sales or shipping at this time. Items will ship within one business day of payment. Excluding weekends and holidays, to your PayPal verified address only. Shipping cost is calculated by location. Weight and dimensions and can be found on the item page. While I do not charge anything extra for shipping. A $0.75 handling charge is added for shipping supplies. Combined shipping is available on multi-item purchases.Please email me prior to payment so an adjusted invoice can be sent. I reserve the right to refuse combined shipping in cases where the integrity of an item may be compromised. Returns: Returns are accepted within 14 calendar days of purchase. In original condition, for purchase price refund and must be processed through eBay’s Automated Returns System. Buyer must pay return shipping in accordance w
|
|
|
Taft Peirce One Pair (2) 1/2"x3/4"x6" Parallels
Up for sale is one pair(2) of Taft Peirce 1/2"x3/4"x6" parallels. Excellent condition. Shows some wear from being used in the shop. A little dirty and few nicks and scratches. Very solid, very nice. Please note that all items are sold‘as is’ and are described to the best of my ability. Including any perceived flaws, so be sure to read the condition description carefully and examine pictures closely to judge for yourself prior to bid or purchase. Any requests for additional pictures or information should be directed towards me prior to bid or purchase. Good luck! Terms and Conditions Payment: Payment is accepted through PayPal only and required within three calendar days of auction. Buy it now or best offer purchase. Non-payment with no contact after three calendar days will result in escalation through eBay. If there is a problem ... morewith payment. Please do not hesitate to contact me. I am very reasonable and will gladly work with you towards a mutually beneficial resolution. Shipping and Handling: Unfortunately I do not offer international sales or shipping at this time. Items will ship within one business day of payment. Excluding weekends and holidays, to your PayPal verified address only. Shipping cost is calculated by location. Weight and dimensions and can be found on the item page. While I do not charge anything extra for shipping. A $0.75 handling charge is added for shipping supplies. Combined shipping is available on multi-item purchases.Please email me prior to payment so an adjusted invoice can be sent. I reserve the right to refuse combined shipping in cases where the integrity of an item may be compromised. Returns: Returns are accepted within 14 calendar days of purchase. In original condition, for purchase price refund and must be processed through eBay’s Automated Returns System. Buyer must pay return shipping in accordance with eBay guidelines. Original shipping is non-refundable with limited exceptions. Please review eBay Terms and Conditions for further information.
|
|
 |