|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Sturdy & Durable Construction: The mini lathe is made of high-quality cast iron which stands up to tear and wear. This lathe allows you to work on both ... moreforward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR 300MM Linear Scale For Milling Lathe Machine Accuracy Grinding Linear. 550W Forceful Motor & Variable Speed & Sturdy Nylon Gears. ... morePower of Motor: 550W DC Single Phase. Through high frequency quenching process and precision grinding of high-quality cast iron bed.
Buy It Now
$25.00 Shipping Condition: New Location: El Monte, United States The AUTOBOX Technical Support team are also U.S.-based. Autobox LLC. Spindle nose taper: MT#3. Carriage travel: 11.6" (295mm). Swing over bed: 7". Swing ... moreover cross slide: 4.3" (110mm). Lead screw support bearing on both ends (add one on left end) reduce vibrations, provide better cutting result, when using auto feed.
Buy It Now
$25.00 Shipping Condition: New Location: El Monte, United States The AUTOBOX Technical Support team are also U.S.-based. Autobox LLC. Spindle nose taper: MT#3. Carriage travel: 11.6" (295mm). Swing over bed: 8". Swing ... moreover cross slide: 4.3" (110mm). Lead screw support bearing on both ends (add one on left end) reduce vibrations, provide better cutting result, when using auto feed.
Buy It Now
Free Shipping Condition: New – Open box Location: Lincolnwood, United States Central Machinery 7”x10” Mini LatheClassic Green Model New Open Box Free Shipping
Buy It Now
Free Shipping Condition: New Location: Durham, United States If you are contemplating cleaning up that old South Bend sitting in the garage, this is what you will need to get the job done. The 106 page professionally ... morepublished instruction manual included with this kit is fully illustrated with almost 250 photographs plus step-by-step instructions and sequences for disassembling, cleaning, reassembling and adjusting the critical components of the lathe.
Buy It Now
Condition: Used Location: Watertown, United States
Buy It Now
Condition: Used Location: Ridgeland, United States Weiler Condor 81 lathe, made in Germany. Serial no. 32027. Spindle is A2-5 standard. Beautiful machine.all axis motions tight but smooth as silk. weight ... moreof the machine ca. 800 kg. turning speed range 30 - 2800 U/min.
Buy It Now
Free Shipping Condition: New Location: Durham, United States If you are contemplating cleaning up that old South Bend Lathe sitting in your garage, this combination kit is what you will need to get the job done. ... moreAs you will notice, this is not a fuzzy Xerox reprint of an older manual that you've probably seen before.
Buy It Now
$700.00 Shipping Condition: Used Location: Bristol, United States We also have a 16 x 30" victor a 15 x 40 cadallic lathe 80" lathe and others. no wear on the hardened bed. 3 jaw tool holder set with inserts.
Buy It Now
$193.65 Shipping Condition: Used Location: Baldwin, United States Atlas.Sears,Craftsman metal turning lathe model 101.07301,hobby machine shop Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click ... moreto Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Tail stock and motor are not included. Condition is as shown. I have not tested it and do not know about the accuracy. Inventory No: 6154 See more great antiques and collectibles in my. Guarantee: Buyer satisfaction is 100% guaranteed. If not completely satisfied. Buyer may return the item for a full refund. BEST OFFER OPTION: Many of my listings have a Best Offer option and I am happy to respond to reasonable offers. Please be advised that while I am considering your offer. Others may make higher offers or even Buy It Now at full price. If this is a rare. Unique, highly sought after, HOT" item and you don't want to lose out, your best choice is to Buy It Now at the full price. PLEASE VISIT my ONLINE EBAY. Check out my! Be sure to add me to your! From my Antiques and Collectables store on US Rt. 1(the old ESSO gas station) in Harrington. Buyer satisfaction is 100% guaranteed. If not completely satisfied. Buyer should notify me immediately. Buyer may return the item for a full refund. Refund will be made as soon as the item is received back in my shop. I prefer Paypal payments but I also accept most major credit cards over the phone. My telephone number can be found on my"Me" page. Payments are expected within 3 days. I ship Monday through Friday usually the day following receipt of payment. If payment is in the form of a check(including echecks paid through Paypal) I will ship after the funds have actually been deposited in my account. I generally ship by USPS or UPS and always with a tracking number. All shipments are 100% insured by me personally until it arrives safely at your address. Items valued at $250.00 or more require your signature at delivery in accordance with Paypal and E
Buy It Now
Condition: Used Location: Salt Lake City, United States Monarch Series 62 Model 2013-16 Engine Lathe 24" Swing x 30" Centers. S/N 43541, New 1958. Stock# 30766 Specifications: Swing over bed– 24” ... moreDistance between centers– 30” Spindle hole– 2-1/16” Spindle Speeds(36) from 14 to 1750 RPM Tailstock spindle diameter– 4.25” Bed width– 17” Main drive motor– 20 hp(3/60/230v) Floor Space– 48” x 132” Weight. Approx– 9,890 Lbs. Equipped with: 3-Jaw Chuck Steady Rest 2-Speed Tailstock Hydraulic Speed Change Flame-Hardened and Precision Ground Bedways. Operators Manual and Parts Manual Included. PRICE: $9.500.00 USD FOB TRUCK DAYTON OH. Used machine in good running condition. Note- we need to confirm speed change mechanism works. Offered locall y an d subject to prior sale. Also su bject to the standard MD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically unsat isfactory or repair at seller option. Loading is availab le. Buyer resp onsible for shipping. We can assist with shipping rate quotes on request. Local sales tax is 7.25% if appl icable. Wire transfer. Ca shier's check. Paypal, company check. Mc and visa are all acceptable forms of payment. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms& Conditions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146eed4210f-0x116-
Buy It Now
$96.79 Shipping Condition: For parts or not working Location: Hudson, United States It is in used condition with heavy wear and tear. It is dirty and rusty. It will need a good cleaning and lube. The moving parts do move freely but will ... moreneed cleaning and lube. The door to the side of the pulleys has loose screws on the hinge.
Buy It Now
Free Shipping Condition: New Location: Cranbury, United States Softwood, hardwood can be processed, can be arbitrary shape creation. Motor speed:20000rev/min. All products are covered by our warranty against defects.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR Wood Lathe 14×51" Variable Speed Wood Turning Benchtop Lathe w/ stand 750W. VEVOR Wood Lathe 14" x 40" Wood Turning Benchtop ... moreLathe 4 Adjustable Speed 400W. VEVOR Wood Lathe Power Lathes 14"x40" Wood Lathe Machine 375W Variable Speed.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Your creativity should not be limited by the equipment. This mini lathe machine is made of high-quality aluminum and plastic. Its excellent ... morehardness makes it easy to work with various stubborn metals, allowing you to get the shape you want. Compared to other devices, it is very mini in order for you to be able to use it more easily. What's more, you don't need to worry about not being able to handle it, because we have a detailed manual to guide you through the operation. Specification 🛑Material: Aluminum and Plastic 🛑 Color: Red + Black 🛑 Motor Speed: 12000rpm/min 🛑 Input Voltage: 12VDC 🛑 Input Current: 2A 🛑 Input Power: 24W 🛑 Voltage: 110-220v, 50-60Hz 🛑 Plug Type: US 🛑 Diameter of Processing Material: Max. 45mm/1.77in.
Buy It Now
$93.92 Shipping Condition: Used Location: Jupiter, United States UP FOR SALE IS THE BED FOR AATLAS CRAFTSMAN BENCH LATHE MODEL TH42 IN VERY GOOD CONDITION. BED IS 54" LONG WITH 3/8" THICK WAYS. YOU GET THE BED AS YOU ... moreSEE IT, BUT I HAVE THE ORIGINAL LEGS FOR IT.
Buy It Now
Condition: Used Location: Waukesha, United States 16" 3 JAW CHUCK. MANUFACTURER.. VICTOR. SPINDLE SPEEDS. . (12) 21 TO 1500 RPM. CHUCK SIZE.. THREADS (ENGLISH). (24) 3.5 TO 26 TPI. MODEL. . 2040.
Buy It Now
Condition: Used Location: Miamisburg, United States The Clausing Colchester Engine Lathe will weigh approx. 3,300# and occupy 100"’ of bed space. Further, inform them it needs to be tarped. We believe the ... morenew owner of this Clausing Colchester Geared Head Engine Lathe will be very happy with it.
$17.00 Shipping Condition: Used Location: Terre Haute, United States IT DOES NOT HAVE ORIGINAL CHUCK KEY. GOD BLESS.
Buy It Now
Condition: Used Location: Harrison, United States 15" X 40" BOLTON ENGINE LATHE. SPINDLE BORE. . 2". SPINDLE NOSE, CAMLOCK, SIZE. D1-5. SPINDLE SPEED RANGE(18). . 65 - 1,800 RPM. 8" 3-JAW CHUCK. 8" 4-JAW ... moreCHUCK.
Buy It Now
$1500.00 Shipping Condition: Used Location: Bristol, United States We have several other lathes, mills, saws, grinders, compressors, and more.
Buy It Now
Free Shipping Condition: New Location: Durham, United States If you are contemplating cleaning up that old South Bend sitting in the garage, this is what you will need to get the job done. The 106 page professionally ... moreproduced and published instruction manual included with this kit is fully illustrated with almost 250 photographs plus step-by-step instructions and sequences for disassembling, cleaning, reassembling and adjusting the critical components of the lathe.
Buy It Now
$93.92 Shipping Condition: Used Location: Jupiter, United States UP FOR SALE IS THE BED FOR ATLAS BENCH LATHE MODEL 3980 IN VERY GOOD CONDITION. BED IS 54-3/16" LONG WITH 1/2" THICK WAYS. YOU GET THE BED AS YOU SEE ... moreIT, BUT I HAVE THE ORIGINAL LEGS FOR IT. YOU WILL GET THE PART JUST LIKE YOU SEE IT IN THE PICTURE.
Buy It Now
Free Shipping Condition: New Location: Durham, United States If you are contemplating cleaning up that old South Bend Lathe sitting in your garage, this combination kit is what you will need to get the job done. ... moreAs you will notice, this is not a fuzzy Xerox reprint of an older manual that you've probably seen before.
Buy It Now
Condition: Used Location: Bradenton, United States Model: TAKISAWA TSL-800. Engine Lathes. Full Cast Base Design 8” Cushman three jaw chuck 10” Buck four jaw chuck Steady rest ROHM Live center Threading ... moredial Change gears Foot treadle 5 H.P. Spindle motor Machine is wired for 220 volt / 3 phase / 60 H.Z Machine weight- 2500 Lbs.
Buy It Now
Free Shipping Condition: New Location: Durham, United States As you will notice, this is not a fuzzy Xerox reprint of an older manual that you've probably seen before. The details include the sequence for disassembling, ... morecleaning, reassembling and adjusting the critical components of the industrial series of lathes.
Buy It Now
Condition: Used Location: Asheville, United States CLIMAX PL3000 PORTABLE LATHE. EXCELLENT CONDITION.
Buy It Now
$8.00 Shipping Condition: New Location: Chino, United States Description Your creativity should not be limited by the equipment. This mini lathe machine is made of high-quality aluminum and plastic. Its excellent ... morehardness makes it easy to work with various stubborn metals, allowing you to get the shape you want. Compared to other devices, it is very mini in order for you to be able to use it more easily. What's more, you don't need to worry about not being able to handle it, because we have a detailed manual to guide you through the operation. Specification 🛑Material: Aluminum and Plastic 🛑 Color: Red + Black 🛑 Motor Speed: 12000rpm/min 🛑 Input Voltage: 12VDC 🛑 Input Current: 2A 🛑 Input Power: 24W 🛑 Voltage: 110-220v, 50-60Hz 🛑 Plug Type: US 🛑 Diameter of Processing Material: Max. 45mm/1.77in.
Buy It Now
$5.59 Shipping Condition: New Location: Delphi, United States South Bend 9"/10k thread chasing dial. If you are looking for an inexpensive fully assembled Threading Dial this is it.
Buy It Now
$15.00 Shipping Condition: Used Location: Bristol, United States FREE SHIPPING IN US! South Bend Lathe 13" Follower Rest Jaws/ Fingers with Bearings New Follower Rest Jaws/ Fingers with Roller Bearings for South ... moreBend 13" Lathes. Take those oily& messy cast iron fingers out and replace them with these smooth running roller bearings! Listing is for a quantity of[2] Fingers- they are 1/2" x 1" and 3" long with 1/2" diameter shielded bearings. Follow Rest not included. Replaces part PT128T1. Designed for full range of motion. Check out my other listings for more Atlas. Craftsman and South Bend Lathe parts! I leave Feedback at time of shipping to notify buyer of shipment. No feedback ransoming here! Questions? email me! Thanks for looking. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Posted with
Buy It Now
$5.95 Shipping Condition: New Location: Ionia, United States SOUTH BEND LATHE MODEL 9" THREAD CHASING DIAL.
Buy It Now
Free Shipping Condition: New Location: Durham, United States If you are contemplating cleaning up that old South Bend sitting in the garage, this is what you will need to get the job done. The 106 page, professionally ... moreproduced and published instruction manual included with this kit is fully illustrated with almost 250 photographs plus step-by-step instructions and sequences for disassembling, cleaning, reassembling and adjusting the critical components of the lathe.
$8.74 Shipping Condition: Used Location: Hayden, United States Logan lathe model 200 72 tooth change gear. 5/8 bore
Buy It Now
Condition: Used Location: Pomona, United States Cross Slide Travel: 5 7/8". Distance Between Centers: 22". Motor:1/3 HP Single Phase. Feeds: 0.0021" - 0.0156" IPR. Wheeler Machinery Sales, Inc. Hole ... moreThrough Spindle: 3/4". Spindle Nose: 3/4"- 8.
Buy It Now
Free Shipping Condition: New Location: Kansas City, United States 7 Inserts. High clamping strength, high impact resistance. It can reduce the tool grinding cost and improve the cutting efficiency. We believe in communication. ... moreModel: SCLCR1212H09, SCLCL1212H09, SDNCN1212H11, SDJCR1212H11, MGHER1212-2, SER1212H16, STGCR1212H11.
Buy It Now
Condition: Used Location: Clare, United States Model: 6950. Chuck: 3 Jaw 8" Dia. Spindle Speeds: 21 - 1650 RPM. Condition: Excellent working machine. Video will open in a new window. Swing Over Bed: ... more14". Bed Length: 30". Get Supersized Images & Free Image Hosting.
Buy It Now
Condition: Used Location: Cincinnati, United States Serial No 50041325, Model S2040B. GAP-TYPE ENGINE LATHE. 20/28" x 40" VICTOR "PRECISION HIGH SPEED". Swing thru Gap 27.5". Swing Over Bed Ways 20". Swing ... moreOver Cross-Slide 12.59". Spindle Nose D1-8 CAMLOCK.
Buy It Now
Free Shipping Condition: New Location: Walton, United States Maximum motor power is 144W by using more powerful motor. With 0.02mm scale line ,the hand wheel increases the precision when processing.
Buy It Now
Free Shipping Condition: New Location: Pittsburgh, United States INCLUDES 2 AXIS DRO INSTALLED. Large 1-1/2″ Spindle Bore. POWER CROSS FEED, BOTH IN, OUT, and LEFT and RIGHT, and WILL CUT. Main Specifications of model ... morePM-1130V Lathe Power Cross Feed, In, Out, Left, and Right Feed.
Buy It Now
Condition: Used Location: Hugo, United States LeBlond Makino Regal Servo Shift Lathe - 15" x 60". New Yhsino YH800-3P DRO. Model: Regal Servo Shift. 3 Jaw adjust tru buck chuck w/ reversible jaws. ... moreSwing: 15". Pull out chip catch pan. Flip down safety shield over chuck.
Buy It Now
Free Shipping Condition: New Location: United States Why Choose VEVOR?. VEVOR Wood Lathe 14" x 40" Wood Turning Benchtop Lathe 4 Adjustable Speed 400W. VEVOR Mini Lathe Machine 24V 96W Mini Wood Lathe Tools ... more2.76 in x 6.3 in 7 Speeds. Variable speed: 50-2250 RPM.
Buy It Now
Free Shipping Condition: New Location: Durham, United States Rebuild Manual& Kit for 9” South Bend Lathe Made in USA By ILION Industrial Services. LLC Horizontal Drive Model A If you are contemplating cleaning ... moreup that old South Bend sitting in the garage. This is what you will need to get the job done. For owners of the vintage Horizontal Drive 9" South Bends who need to disassemble and clean up their machine, this comprehensive instruction manual plus our aftermarket assortment of consumable gaskets, wicks, wipers and oil control felts will provide all that is required to help put your lathe back into its original operating condition. The 106 page professionally produced and published instruction manual included with this kit is fully illustrated with almost 250 photographs plus step-by-step instructions and sequences for disassembling, cleaning, reassembling and adjusting the critical components of the lathe. Click on the page samples above and hit the"zoom" button to see a close-up. The instruction are very straight forward and no prior machinery rennovation experience is required. The manual also includes a list of resources for vintage SBL owners as well as parts references, tool specifications, lubrication guides and material specifications. The text is printed in a font that is two points larger than is typical so if you getting up in years like me, you will not have to work at the bench with your reading glasses on. The consumable parts we include with the kit were all designed to be completely compatible with the 9" series of lathes. The wicks provide adequate lubrication to critical parts of the lathe while at the same time acting as a trap for dirt, chips and sludge. They should be replaced at regular intervals as opposed to trying to clean and reuse the old ones. The capillary oil wicks we provide for the spindle are made from the highest grade tempered spring steel, CNC wound and stress relieved to provide long service life. The lower wicking material is long-strand virgin wool and the cap wick is high quality hard grey felt so you will
Buy It Now
Free Shipping Condition: New Location: Durham, United States Rebuild Manual& Kit for 9” South Bend Lathe Made in USA By ILION Industrial Services. LLC Horizontal Drive Model A If you are contemplating cleaning ... moreup that old South Bend sitting in the garage. This is what you will need to get the job done. For owners of the vintage Horizontal Drive 9" South Bends who need to disassemble and clean up their machine, this comprehensive instruction manual plus our aftermarket assortment of consumable gaskets, wicks, wipers and oil control felts will provide all that is required to help put your lathe back into its original operating condition. The 106 page professionally produced and published instruction manual included with this kit is fully illustrated with almost 250 photographs plus step-by-step instructions and sequences for disassembling, cleaning, reassembling and adjusting the critical components of the lathe. Click on the page samples above and hit the"zoom" button to see a close-up. The instruction are very straight forward and no prior machinery rennovation experience is required. The manual also includes a list of resources for vintage SBL owners as well as parts references, tool specifications, lubrication guides and material specifications. The text is printed in a font that is two points larger than is typical so if you getting up in years like me, you will not have to work at the bench with your reading glasses on. The consumable parts we include with the kit were all designed to be completely compatible with the 9" series of lathes. The wicks provide adequate lubrication to critical parts of the lathe while at the same time acting as a trap for dirt, chips and sludge. They should be replaced at regular intervals as opposed to trying to clean and reuse the old ones. The capillary oil wicks we provide for the spindle are made from the highest grade tempered spring steel, CNC wound and stress relieved to provide long service life. The lower wicking material is long-strand virgin wool and the cap wick is high quality hard grey felt so you will
Buy It Now
Condition: Used Location: Dayton, United States Center distance - 60". Spindle speeds (16) - 30 to 1800 rpm. Swing over bed - 16". Weight, approx - 4400 lbs. Newall Digital Readout. Equipped with Swing ... moreover gap - 23 1/2". Swing over cross slide - 10 1/4".
Buy It Now
Free Shipping Condition: New Location: Durham, United States If you are contemplating cleaning up that old South Bend sitting in your garage, this kit is what you will need to get the job done. They should be replaced ... moreat regular intervals as opposed to trying to clean and reuse the old ones.
Buy It Now
Condition: Used Location: Waukesha, United States SONY 2 AXIS DIGITAL READOUT. BETWEEN CENTERS. 80". MODEL.. DM-550. 18" JAW CHUCK. SWING OVER CROSS SLIDE. 11". 15" ROHM 3J CHUCK. HOLE IN SPINDLE. 4".
Buy It Now
Condition: Used Location: Orange City, United States Greenway Product Number: 10912. Distance between centers.. 20”. Maximum swing over bed.. 12 ½”. Drill chuck.
Buy It Now
$10.60 Shipping Condition: Used Location: Watsontown, United States This Tool Holder Riser Block is a great addition to your Hardinge DV-59 Lathe Model E Cross Slide Complete. It is compatible with Precision Lathes and ... moreis specifically designed for Hardinge brand. This item is perfect for those in the Metalworking industry and is ideal for those looking to upgrade their equipment. The Tool Holder Riser Block is durable and made with high-quality materials to ensure long-lasting use. It is perfect for those looking to increase their lathe's capabilities and is easy to install. This product is a must-have for anyone looking to improve their metalworking equipment.
Buy It Now
$49.05 Shipping Condition: Used Location: Wildomar, United States Lathe Bed is clean and in good condition. Fits Craftsman 6" Metal Lathe Model 109.21270. Craftsman Part No. D-3601.
Buy It Now
Condition: Used Location: Bridgeport, United States Model 2060S. 2 Axis DRO. Victor 20" x 60" Engine Lathe. We can load this lathe onto your truck or trailer for free. Includes 4 or 5 chucks (3 and 4 jaw). ... more3-1/8" Spindle Hole. 2,000 max. spindle RPM.
Buy It Now
Free Shipping Condition: New Location: Durham, United States If you are restoring an older Southbend lathe, don’t miss your chance to pick up a set for your machine. We are more than happy to help. The four sintered ... morebronze bearings are made by Oilite and are fabricated of porous bronze which retains oil very well and reduces wear on the shaft.
$8.74 Shipping Condition: Used Location: Hayden, United States 56 tooth change gear from a Logan model 200 lathe. 5/8 bore
Buy It Now
Condition: New Location: Ridgeland, United States Demo model, Bernardo Compact 400 toolroom lathe. It is also nearly identical to the (German) GDW model LZ360S. See below for features and specs. Swing ... moreover cross slide. The machine bed is made of one piece, it is warp resistant and vibration-free which enables precise turning.
Buy It Now
Condition: Used Location: Harrison, United States MODEL: C1440S, S/N:48511, NEW: 2004. SPINDLE BORE. . 1-5/8". SPINDLE NOSE, CAMLOCK, SIZE. D1-5. SPINDLE SPEED RANGE(18). . 30 - 2,000 RPM. STEADY REST.
Buy It Now
Free Shipping Condition: New Location: Kansas City, United States High clamping strength, high impact resistance. 7 Inserts. It can reduce the tool grinding cost and improve the cutting efficiency. Model: SCLCR1212H09, ... moreSCLCL1212H09, SDNCN1212H11, SDJCR1212H11, MGHER1212-2, SER1212H16, STGCR1212H11.
Buy It Now
$6.05 Shipping Condition: New Location: Wilton, United States Hardinge lathe Model HC HC-R Chucker Parts LIST MANUAL. Comb binding. I have a large database and have only listed a fraction of thus far. New reproduction ... moreof parts Manual.
Buy It Now
$5.40 Shipping Condition: New Location: Derby, United States Reproduction South Bend Lathe apron screw. The screw is just like the original with left hand threads. Original part number PT355NF1
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Your creativity should not be limited by the equipment. This mini lathe machine is made of high-quality aluminum and plastic. Its excellent ... morehardness makes it easy to work with various stubborn metals, allowing you to get the shape you want. Compared to other devices, it is very mini in order for you to be able to use it more easily. What's more, you don't need to worry about not being able to handle it, because we have a detailed manual to guide you through the operation. Specification 🛑Material: Aluminum and Plastic 🛑 Color: Red + Black 🛑 Motor Speed: 12000rpm/min 🛑 Input Voltage: 12VDC 🛑 Input Current: 2A 🛑 Input Power: 24W 🛑 Voltage: 110-220v, 50-60Hz 🛑 Plug Type: US 🛑 Diameter of Processing Material: Max. 45mm/1.77in.
Buy It Now
$65.00 Shipping Condition: Used Location: Bristol, United States
|
|
|
|
MORI SEIKI MODEL ZL-25A/500 4-AXIS CNC TURNING CENTER, cnc lathe, will ship worl
MORI SEIKI MODEL ZL-25A/500 4-AXIS CNC TURNING CENTER General Specifications Swing over bed 20.5" Swing over cross slide 13.8" Between centers 25.4" Max. machining diameter 10.2" Max. machining length 21.7" X-Axis Up:6.3"1.2"+5.1" Z-Axis Up:23.2"Down:23.2" Spindle speed 42-4200 RPM Spindle nose JIS A-6 Hole thru spindle 2.4" Spindle I.D. 4.3" Shank height for square tool 1.0" Shank diameter for boring bar Max. 2.0" Rapid feed rate(Z-Axis) 590.6" Tailstock stroke 23.2" Tailstock quill taper MT3 Tailstock quill stroke 3.1" Electric power supply 40 Kva Machine Weight(approx) 15.400 Lbs NOTE: CUTTING HOURS 6,064 Motor Specifications Not Available Equipped With Mori/Fanuc MSD-516(Fanuc 16T) CNC controls Programable tailstock(2) Turrets Misc. turret toolholders ... moreCollect chuck Chip Conveyor Splash guards Serial Number 654 Year 1995 Location PROSPECT HEIGHTS. IL Video:
|
|
|
19" swing X 39.5" centers HES ERNAULT TOYODA MODEL GT-52 CNC LATHE 2-axis
GRAY MACHINERY COMPANY. 800-292-1493* 847-537-7700* FAX 847-537-9307 77 E. PALATINE ROAD* PROSPECT HEIGHTS. IL 60070-1811 WEB: www.graymachinery.com* EMAIL: sales@graymachinery.com PROPOSAL Stock 00010824 Quote# 278246 We are pleased to submit for your consideration: 19" X 39.5" HES ERNAULT TOYODA MODEL GT-52 CNC LATHE SERIAL NUMBER 52033 NEW 1986 GENERAL SPECIFICATIONS: Max. part diameter 19" Max. part length 39.5" Max. diameter machineable between centers 12.6" Spindle nose A1-8" Bore 3" Spindle motor 19.5 HP Max. Spindle speed 40.000 RPM Longitudinal travel 54" Transverse travel 10" Rapid traverse 394 IPM Turret Positions 12 EQUIPPED WITH: General Numeric(Fanuc) 10T CNC control 12" 3-Jaw chuck 12 Position turret Sliding splash guards Coolant system Tailstock Chip conveyor NOTE: CURRENTLY ... moreIN OPERATION Click for Video:
|
|
|
The STEAM LOCOMOTIVE IN 1838 BY TREDGOLD Book 4 model live steam myford lathe
This sale is for One previously owned COPY of: Tredgold. T. Woolhouse, W.S.B. ed. THE STEAM LOCOMOTIVE IN 1838 ROBERT STEPHENSON'S PATENT LOCOMOTIVE ENGINE: ITS INVENTION AND PROGRESSIVE IMPROVEMENT. AN INVESTIGATION OF ITS PRINCIPLES AND ITS APPLICATION TO NAVIGATION, MANUFACTURERS AND RAILWAYS. V.1, Felton 1967) 23 pages + 4 fold out plates in a soft cover binding. This work is an edited reprint of an original published in the 1880's and offers detailed information on this steam locomotive, including detailed drawings and schematics that would be useful in recreating this item. This book is in excellent condition like new and would make a great gift for the model live steam hobbyist or railroad enthusiast. This high quality PUBLICATION is being offered at an exceptional price. A rule may appear in the photographs for scale reference ... moreonly and is not part of this sale. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their go-vernment when items cross the border. These are the sole responsabi, lity of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents, so please don't ask. We now accept PAYP AL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability. Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item th
|
|
|
A CENTURY OF MODEL TRAINS 1974 Oversized Book for model live steam myford lathe
This sale is for ONE previously owned COPY of: Levy. A. A CENTURY OF MODEL TRAINS. New York 1974) 208 pages. This is an oversized hard cover book that is in excellent condition. It contains a table of contents and index of manufacturers. The book is rich with coloured and black& white pictures of rail from 1879-1970. This high quality PUBLICATION is being offered at an exceptional price. A rule may appear in the photographs for scale reference only and is not part of this sale. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have ... morecustoms or duty charges applied by their go-vernment when items cross the border. These are the sole responsabi, lity of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents, so please don't ask. We now accept PAYP AL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability. Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or poss
|
|
|
CHNC Hardinge CNC Lathe Model CHNC 16C
This is a Used Hardinge CHNC 16C Model CNC Lathe Non Working. For Parts. This would make a great retrofit project. Does not have the original control, or motors, or spindle motor, they were removed. Machine sold" As Is Where Is" Any questions please call Jerry Kohler 503-998-0985 Shipping Shipping is the responsibility of the buyer; however. We have a network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Payment Wire Transfers and Direct Deposits. Are the preferred method of payment for purchases over $5.000.00, but can be made on any amount. Please contact jerry@cncbyamr.com for Wire instructions. Cashiers Checks and Money Orders. For Purchases ... moreover $1.000.00 are to be sent overnight, via priority mail, FedEx or UPS and tracking number confirmation emailed to: jerry@cncbyamr.com Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. And a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment.
|
|
|
25 X 120" TOOLMEX MODEL TUR-630-A ENGINE LATHE
25 X 120" TOOLMEX MODEL TUR-630-A ENGINE LATHE 25 X 120" TOOLMEX MODEL TUR-630-A ENGINE LATHE: STOCK# 60046 SPECIFICATIONS SERIAL. 49664 MODEL. TUR-630-A YEAR. 1991 SWING OVER WAYS. 24.8" SWING OVER CROSS SLIDE. 14.9" DISTANCE BETWEEN CENTERS. 120" DIAMETER OF SPINDLE HOLE. 5-1/2" CHUCK FRONT. 15-1/2" 6 JAW CHUCK REAR. 15-1/2" 4 JAW SPINDLE SPEEDS. 27) 15 TO 1400 RPM LONGITUDINAL FEEDS. 42) 002 TO 121 IPR CROSS FEEDS. 001 TO.060 IPR THREADS ENGLISH. 42) 1 TO 88 TPI THREADS METRIC. 42) 1 TO 88 MM TAPER ATTACHMENT. YES RAPID TRAVERSE. YES TRAVEL DIAL. YES STEADY REST. 12" ROLLER TYPE COOLANT WITH CHIP PANS. YES MOTOR. 20 HORSEPOWER DIMENSIONS. 192" X 64" 60"H CALL US FOR SHIPPING QUOTES YODER MACHINERY STOCK#60046 We accept Visa. Master Card, American Express, Discover. We also accept ... morePaypal. All purchases under $ 100.00 are expected to be paid within three days of end of auction. Multiple and single winning bids, totaling between $100.00 to $ 999.00 will need to be paid within two days of end of auction. Multiple and single winning bids over $ 1,000.00 need to be paid by the next business day and we ask that you have your finances in order before end of auction. Buyers are responsible for all shipping and handling charges. Please know the cost of shipping before placing your bid. If you have your own truck. Trailer or have arranged your own freight we can load your large item or machine free of charge. All orders being shipped to PO Boxes must be delivered via the United States Postal Service(USPS) Shipping rates are available at www.usps.com. Weight restrictions may appl
|
|
|
OKUMA MODEL LB25 2-AXIS CNC TURNING CENTER LATHE, WILL SHIP WOROLSIDE
OKUMA MODEL LB25 2-AXIS CNC TURNING CENTER General Specifications Capacity: Swing over bed 24.41" 18.90" over cross-slide) Max. Turning dia x length 14.17" x 25.59" Chuck Work: 14.17" x 11.81" Distance between centers 26.38" Main Spindle: Spindle dia/bore dia. 4.72" 3.15" Spindle nose JIS A2-8 Tapered bore 3.54" x 1/10 Spindle speeds. No. ranges 65-3500 RPM, Infinitely variable x auto 2 ranges(VAC motor coil switching) Cross-Slide& Saddle: Cross-slide travel(X-axis) 7.28" + 1.77" Saddle travel(Z-axis) 26.38" Cutting feedrate 0.0001-40.000(X& Z axis) ipr Rapid-traverse rate: X-Axis472 ipm/min. Z-Axis591 ipm/min. Servomotor(brushless) X-Axis2.7 HP Z-Axis5 HP Turret: Type and No. of tool stations V12 Hydraulic Tailstock: Quill dia.stroke 3.94" 4.72" Tapered bore ... moreMT No. 5 Main motor Wide range VAC 20/15(30 min/ cont. Coolant pump motor 0.33 HP Power source capacity 46.2 kVA(cable size: over 0.87" sq. Floor space 135" x 71" Net weight 12.760 LBSCont. on Page 2 Stock 1 23SERIAL NUMBER 4 NEW 5 2 Motor Specifications Not Available Equipped With OSP 5020 CNC Controls VIDEO: 12 Position Turret 3.15" Spindle Bore Hydraulic Tailstock Splash Guards 10" 3-Jaw chuck Tool presetter Color graphics and IGF tool nose radius comp. Serial Number 9144 Year 1990 Location PROSPECT HTS.IL
|
|
|
SMITHY,LATHE COMBO, DRILL, MILL, LATHE , MODEL 1324, TOOLING, REAL NICE, 110 VOL
SN 06061 MODEL GRANITE 1324 VARIABLE SPEED MILL. DRILL, LATHE 1.100 SPINDLE BORE TOOLING MOUNTING ON VIDMAR CABINETS WITH MAPLE TOP. ROLLER WHEELS NICE PIECE MANUALS 110 VOLT. SINGLE PHASE NO CHARGE FOR LOADING
|
|
|
25" x 80" CLAUSING NARDINI MODEL SZ2580T ENGINE LATHE
25" x 80" CLAUSING NARDINI MODEL SZ2580T ENGINE LATHE 25" x 80" CLAUSING NARDINI MODEL SZ2580T ENGINE LATHE: STOCK# 61086 SPECIFICATIONS MODEL. SZ2580T SWING OVER BED. 25" SWING IN GAP. 33" SWING OVER CROSS SLIDE. 18" DISTANCE BETWEEN CENTERS. 80" SPINDLE SPEEDS. 18)19- 1.500 RPM SPINDLE NOSE. D1- 8 HOLE THRU SPINDLE. 3" THREADS INCH. 54) 2 3/4- 42 TPI THREADS METRIC. 54)0.4- 18MM FEEDS. 132) 0.0010" 0.0979" CROSS SLIDE TRAVEL. 14" TAILSTOCK QUILL TAPER. 5 MT TAILSTOCK QUILL TRAVEL. 8" 3 JAW CHUCK. YES FOUR WAY RAPID TRAVERSE. YES COOLANT SYSTEM. YES BED STOP. YES MOTOR. 12.5 HP WEIGHT. 7.100 LBS. CALL US FOR SHIPPING QUOTES YODER MACHINERY STOCK#61086 We accept Visa. Master Card, American Express, Discover. We also accept Paypal. All purchases under $ 100.00 are expected to ... morebe paid within three days of end of auction. Multiple and single winning bids, totaling between $100.00 to $ 999.00 will need to be paid within two days of end of auction. Multiple and single winning bids over $ 1,000.00 need to be paid by the next business day and we ask that you have your finances in order before end of auction. Buyers are responsible for all shipping and handling charges. Please know the cost of shipping before placing your bid. If you have your own truck. Trailer or have arranged your own freight we can load your large item or machine free of charge. All orders being shipped to PO Boxes must be delivered via the United States Postal Service(USPS) Shipping rates are available at www.usps.com. Weight restrictions may apply. The United Parcel Service is another option for packages under 150lbs. Shipping rates are available at www.ups.com. Estimated UPS and USPS delivery time within the US is 3 to 7 business days from the time the order is processed. Orders above 149 lbs.
|
|
|
28" X 86" SIRCO MODEL PA-24 GAP BED ENGINE LATHE
28" X 86" SIRCO MODEL PA-24 GAP BED ENGINE LATHE 28" X 86" SIRCO MODEL PA-24 GAP BED ENGINE LATHE: STOCK# 61351 SPECIFICATIONS SERIAL. 3047 MODEL. PA-24 SWING OVER WAYS. 28" SWING OVER CARRIAGE. 20" DISTANCE BETWEEN CENTERS. 84" SWING IN GAP. 40" LENGTH OF GAP. 10" SPINDLE SPEEDS. 20 TO 2000 RPM SPINDLE HOLE. 3-1/2" LONGITUDINAL FEEDS(ENGLISH) 0014 TO.3398 CROSS FEEDS(ENGLISH) 0009 TO.2170 THREADS. 9/16 TO 128 TPI THREADS(METRIC) 28 TO 64 MM TAPER ATTACHMENT. YES HARD WAYS. YES COOLANT AND CHIP PAN. YES MOTOR. 10 HORSEPOWER WEIGHT. 7.400 LBS. DIMENSIONS. 147" X 58" X 58" CALL US FOR SHIPPING QUOTES YODER MACHINERY STOCK#61351 We accept Visa. Master Card, American Express, Discover. We also accept Paypal. All purchases under $ 100.00 are expected to be paid within three days ... moreof end of auction. Multiple and single winning bids, totaling between $100.00 to $ 999.00 will need to be paid within two days of end of auction. Multiple and single winning bids over $ 1,000.00 need to be paid by the next business day and we ask that you have your finances in order before end of auction. Buyers are responsible for all shipping and handling charges. Please know the cost of shipping before placing your bid. If you have your own truck. Trailer or have arranged your own freight we can load your large item or machine free of charge. All orders being shipped to PO Boxes must be delivered via the United States Postal Service(USPS) Shipping rates are available at www.usps.com. Weight restrictions may apply. The United Parcel Service is another option for packages under 150lbs. Shipping rates are available at www.ups.com. Estimated UPS
|
|
|
2007 JET 13″ X 40″ GEARED HEAD GAP BED ENGINE LATHE - MODEL GH-1340W
13″ X 40″ JET GH-1340W GEARED HEAD GAP BED ENGINE LATHE. YEAR/ MODEL GH-1340W EQUIPPED WITH 6-1/2″ 3-JAW CHUCK, 12” FACE PLATE, STEADY REST, FOLLOW REST, MICRO CARRIAGE STOP, THREAD CHASING DIAL, TOOL POST, ACU-RITE 2-AXIS DRO, SPECIFICATIONS SWING OVER BED: 13″ SWING OVER CROSS SLIDE: 7-1/2” SWING THOUGH GAP: 19” DISTANCE BETWEEN CENTERS: 40” HOLE THROUGH SPINDLE: 1-1/2” SPINDLE MOUNT: D1-4, SPINDLE TAPER(WITH SLEEVE) MT-5(MT-3) NUMBER OF SPINDLE SPEEDS: 12, RANGE OF SPINDLE SPEEDS: 40– 1.800 RPM, NUMBER OF LONGITUDINAL& CROSS FEEDS: 40, RANGE OF LONGITUDINAL FEEDS: 0012– 0294 IPR, NUMBER OF INCH THREADS: 40, RANGE OF INCH THREADS: 4– 112 TPI, NUMBER OF METRIC THREADS: 22, RANGE OF METRIC THREADS: 45– 7.5 MM, MAX TOOL SIZE: 5/8” X 5/8” MAX COMPOUND SLIDE TRAVEL: 3-1/2” MAX CROSS SLIDE TRAVEL: 6-3/8” MAX CARRIAGE TRAVEL: 37-1/2” TAILSTOCK ... moreSPINDLE TRAVEL: 4-3/4” TAPER IN TAILSTOCK SPINDLE: MT-3, STEADY REST CAPACITY: 2-5/8” FOLLOW REST CAPACITY: 2-3/4, WIDTH OF BED: 10-1/2” MAIN MOTOR: 3 HP, OVERALL DIMENSIONS: 73-3/4” LR X 29-1/2” FB X 46-3/4” H, NET WEIGHT: 2.081 LBS, ELECTRICS: 220 VOLTS. 3 PH, 60 CYC, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1402f509bcc-0xf9-
|
|
|
20" X 80" TOS GAP BED LATHE - 1999 - Model # SN50C
20" X 80" TOS GAP BED LATHE New 1999- Model# SN50C Swing Over Ways: 20" Swing Over Cross Slide: 10-3/4" Swing in Gap: Approx. 29" Distance from Spindle Nose to End of Gap: 13" 24) Spindle Speeds: 22.4 to 2000 RPM. Spindle Nose: D1-6. Spindle Bore: 2-3/16" Feeds: 002 to.195 TPR. Inch Threading: 1 to 52 TPI. Metric Threads: 5 to 40 TPMM. Quill in Tailstock: 2-3/4" Dia. Quill Travel: 7" 5 MT in Quill. EQUIPPED WITH: 12-3/4" 3-Jaw Chuck with 2-Piece Jaws. 10" Roller Steady Rest& Follow Rest. Full Length Rear Splash Guard. 1) Bull Nose Center. 10 HP Motor. Wired 3 Phase, 60 Cycle, 220 Volts. Overall Size: 12' L x 50" W x 5' H. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
Elliott Concord Model 450 Lathe - 20" Swing 80" Centers
C9825. Elliott Concord Model 450 Lathe- 20" Swing 80" Centers- 13 feet long- 4 feet deep- 52 inches tall- Has 4 jaw chuck. Steady rest and face plate- Not used for several years. Please review all the pictures. They are part of the description. We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
Wyvern Lathe Model 4 WT Parts List
You are buying a Wyvern Lathe Model 4 WT Spare Parts List. Digitally remastered in A4 format for easy reading. Approximately 15 pages with photographs of the lathe parts with parts numbers, clear and very informative.Payment within 7 days.I will accept paypal.I will post worldwide. UK postage.£2.45 Europe postage(EU Countries)£3.95 Rest of the world postage(Non-EU Countries)£5.30 I can send a PDF download Link.No charge. this is for Non-UK buyers only) email to ask for an invoice for this. Sorry I do not accept foreign cheques or foreign postal orders. Please choose another payment option. See'My Other Items' For Full List Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. Or you can contact me to discuss anything or pay by credit/debit card on 01623-491001 or 07710-401194 See'my other ... moreitems'for other machinery/tooling and also here See'my other items'for a good range of machine manuals and even more machine manuals here Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-14089c18d72-0xff-
|
|
|
SPEED LATHE, VAN NORMAN, 6" CHUCK, 110 VOLT, BENCH MODEL
110 VOLT 6" 4 JAW CHUCK USED TO POLISH AND LAP PIN GAGES WORKS WELL NO ISSUES
|
|
|
South Bend Lathe Apron for 9" Model C Complete bolt on Unit
Hello you are bidding on a South Bend 9" model C Carriage apron I rebuilt and repainted this apron about 7 years ago but shortly after built a model A so no longer need this apron. Half nuts wear replaced, grease cock added for better lubrication in the half nut lever and cog wheel handle was replaced everything is present to be a bolt on replacement or your machine headstock was painted with automotive enamel not some spray bomb paint job to resist grease and oil staining. The headstock was set up for auto oiler but theaded oil cups can be obtained. The reverse gears and bed clamps are not included in this auction just whats pictured. Why am i selling this? well i never realy used it becouse shortly after I rebuilt this apron i got a lathe under bed driven cabinet and converted this lathe to a model A 10k Lathe. This part is not compatable ... morewith the lathe anymore. Item may show some signs of storage wear and has some scratches but should be a bolt on installation. Please note this item is used and being sold as is. Check my feedback and bid with confidence. Please check my other items for more parts from this lathe. Free shipping with buy it now
|
|
|
South Bend Lathe Bed 36" for 9" Model A, B,C Benchtop Lathes
Hello you are bidding on a South Bend Lathe 9" 10k Lathe bed the length is 36" from end to end. Restored about 7 years ago was hot tanked and repainted in automotive enamel for easy cleaning and to resist oil staining. This table comes with the lathe bed. Feet, front bearing and model C leadscrew. tailstock side bearing for the leadscrew was needed for the other lathe and is not included with this item. I had the v channels checked before painting by the same machine shop as the headstock and was dont they were strait enough they didnt need any work sorry i dont have a strait edge to check it again presently but since it was never realy used it should still be the same. Why am i selling this? well i never realy never used it becouse shortly after I rebuilt this lathe i got a lathe under bed driven cabinet and converted this lathe ... moreto a model A 10k Lathe. This part is not compatable with the lathe anymore. Buyer is responsible for knowing if this will work for their machine or not. Item may show some signs of storage wear and has some scratches but should be a bolt on installation. Please note this item is used and being sold as is. Check my feedback and bid with confidence. Please check my other items for more parts from this lathe.
|
|
|
LNS hydrobar lathe bar feeder model 7.76-5.2
LNS Hydro bar lathe bar feeder. model 7.76-5.2 s/n 20.957 We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172 located cr- sh3 d7
|
|
|
HARDINGE MODEL DSM-59 HIGH SPEED PRECISION SECOND OPERATION LATHE radius turning
HARDINGE MODEL DSM-59 HIGH SPEED PRECISION SECOND OPERATION LATHE General Specifications Spindle construction Hardinge preloaded ball bearing Spindle capacity: with Round 5C Hardinge collets 1-1/16" with Hexagon 5C Hardinge collets 7/8" with Square 5C Hardinge collets 3/4" with Step chucks 1-1/16" to 6" with Jaw chucks 5" with Jaw chucks(through spindle) 1-5/32" Spindle speeds(variable) 230 to 3500 RPM Length of bed 36" Swing over bed 9" Travel of double tool cross slide 3-3/4" Travel of turret slide 4" Diameter of turret holes 5/8" Coolant sump capacity 3 gallons Overall dimensions 60" L x 30" W x 60" High Approximate weight 1.000 lbs. Motor Specifications 1 HP 3/60/220 volt Spindle motor Push button electrical controls Equipped With Variable speed spindle with push ... morebutton control Collet closer Factory base Cross slide with Radius turning attachment Serial Number DV-59-6785 Year 1962 Location PROSPECT HEIGHTS. IL
|
|
|
CINCINNATI 2 HP MODEL 101 BUFFERING LATHE (WILL SHIP)
CINCINNATI 2 HP MODEL 101 BUFFERING LATHE General Specifications RPM1750 Motor Specifications 2 HP AC Drive Equipped With Not Available Serial Number 146545 Year 1980 Location PROSPECT HTS. IL
|
|
|
TAKISAWA, CNC LATHE, MODEL TC-1, FANUC OT CONTROL, COLLET CHUCK, TAILSTOCK
MODEL TC-1 SN THZT 7214 FANUC OT CONTROL 12 POSITION TURRET TAILSTOCK COOLANT 40-4500 RPM IN PLANT UNDER POWER. MAKING GOOD PARTS SOME TOOLING FOR TURRET 15" SWING 17"5 BETWEEN CENTERS COLLET CHUCK"NO 3 JAW CHUCK" CHARGE TO LOAD ON TRUCK.$750.00 WIRED 220 VOLT. 3 PHASE
|
|
|
ORIGINAL South Bend model C lathe Set Screw 17/128 inches long
This is a vintage set screw off of a South Bend 9" model C lathe. It is 17/128 inches long. 13/16 inches across and its TPI is 32.
|
|
|
34" X 60" HAAS MODEL SL40TB "BIG BORE" CNC LATHE: STOCK #62237
34" X 60" HAAS MODEL SL40TB"BIG BORE" CNC LATHE 34" X 60" HAAS MODEL SL40TB"BIG BORE" CNC LATHE: STOCK# 62237 SPECIFICATIONS SERIAL. 64661 MODEL. SL40TB BIG BORE YEAR NEW. 2001 SWING OVER FRONT APRON. 40" SWING OVER CROSS SLIDE. 25" DISTANCE BETWEEN CENTERS. 51" MAXIMUM CUTTING DIAMETER. 25-1/2" MAXIMUM CUTTING LENGTH. 44" SPINDLE SPEEDS. 1400 RPM X TRAVEL. 17" RAPID TRAVERSE X& Z. 710 IPM SPINDLE HOLE. 6" TURRET. 10 ATC TAILSTOCK. PROGRAMMABLE CONTROLS. HAAS COOLANT. YES MOTOR. 40 HORSEPOWER CALL US FOR SHIPPING QUOTES YODER MACHINERY STOCK#62237 We accept Visa. Master Card, American Express, Discover. We also accept Paypal. All purchases under $ 100.00 are expected to be paid within three days of end of auction. Multiple and single winning bids, totaling between ... more$100.00 to $ 999.00 will need to be paid within two days of end of auction. Multiple and single winning bids over $ 1,000.00 need to be paid by the next business day and we ask that you have your finances in order before end of auction. Buyers are responsible for all shipping and handling charges. Please know the cost of shipping before placing your bid. If you have your own truck. Trailer or have arranged your own freight we can load your large item or machine free of charge. All orders being shipped to PO Boxes must be delivered via the United States Postal Service(USPS) Shipping rates are available at www.usps.com. Weight restrictions may apply. The United Parcel Service is another option for packages under 150lbs. Shipping rates are available at www.ups.com. Estimated UPS and USPS delivery time within the US is 3 to 7 business days from the time the order is processed. Orders above 149 lbs. must be shipped via freight carrier. Yoder Machinery has discounts available from a number of common carriers/ truckin
|
|
|
Vertical Turret Lathe 59" Shibaura Model VTS-15 from assetexchangeinc.com
You are viewing our Shibaura Vertical Turret Lathe. See below or call me for detail. Gregg. Scott, Mark or Steven. 773-866-9600 or email sales@assetexchangeinc.com 59" Shibaura Model VTS-15 Adjustable Rail Vertical Turret Lathe 59" Diameter 4 Jaw Table. 60" Swing, 40 HP, Side Head, Turret Head Specifications and Equipment Maximum Swing: 60" Table Size(4) Jaw: 59" Height under cross rail: 59" Height under turret face: 46.45" Horizontal Turret head movement across rail: 34” Vertical travel of side head: 40” Feeds/ Range: 0.05-5 mm/rev, Table speeds: 5- 160 RPM, Main Motor Drive: 40 HP, Equipped With: Turret Head. Side Head, Full Pendant control, 59" 4) Jaw Chuck with Top Jaws,
|
|
|
13" X 25" HARRISON MODEL AA PRECISION TOOLMAKER LATHE
13" X 25" HARRISON MODEL AA PRECISION TOOLMAKER'S LATHE SPECIFICATIONS SWING OVER BED& CARRIAGE WINGS: 13" SWING OVER EXTENDED CROSS SLIDE: 8-1/4” CENTER DISTANCE: 25" INDUCTION HARDENED& GROUND BED WAYS MINIMUM HARDNESS: ROCKWELL C-44 BED WIDTH: 8" DRIVE MOTOR TEFC REVERSING: 3 HP HEADSTOCK SPINDLE BEARINGS: GAMET ULTRA PRECISION SPINDLE NOSE: D1-4" CAMLOCK SPINDLE HOLE: 1-1/2” INFINITELY VARIABLE SPEEDS. 3) OVERLAPPING RANGES LOW RANGE THRU GEARS: 35- 180 RPM INTERMEDIATE RANGE THRU GEARS: 150- 800 RPM HIGH RANGE THRU DIRECT DRIVE: 500- 3000 RPM SPEED INDICATOR: LIGHTED DIGITAL DISPLAY FOOT OPERATED BRAKE: STANDARD EQUIPMENT CARRIAGE& COMPOUND CROSS SLIDE WIDTH: 5-1/2” COMPOUND WIDTH: 3-1/4 CROSS SLIDE TRAVEL: 7-1/2” TOOL SLIDE TRAVEL: 3-5/8" ONE SHOT LUBRICATION: STANDARD FULL LENGTH CROSS ... moreSLIDE: STANDARD LEAD SCREW: 1-1/8” X 4 TPI FEED ROD DIAMETER: 11/16” SAFETY OVERLOAD CLUTCH ON FEED ROD: YES SAFETY TORQUE LIMITING DEVICE ON LEAD SCREW: YES THREADS INCH PITCHES(52) 4 TO 112 METRIC PITCHES(45) 1 TO 7 MODULE PITCHES(18) FROM.3 TO 3.5 MOD DIAMETRAL PITCHES(18) FROM 8 TO 56 DP FEED RATES USEFUL FEEDS IN INCHES PER REVOLUTION(21) 0005 TO.040 USEFUL FEEDS IN MILLIMETERS PER REVOLUTION(21) 015 TO 1 TAILSTOCK SPINDLE DIAMETER: 1-21/32” GRADUATION ON SPINDLE: 1/8” GRADUATION ON MICROMETER DIAL: 001” SPINDLE TRAVEL: 4-3/8" SPINDLE TAPER: NO. 3 MORSE SET OVER: ½” WEIGHTS& MEASURES(APPROX. NET WEIGHT: 1.500 LBS DIMENSIONS: 5’6” LR) X 3’8” 9FB) X 4’4” H) ELECTRICS: 230 V. 3 PH, 60 CYC. EQUIPPED WITH: INCH/METRIC THREADING& DIALS 5C COLLET CLOSER TRACER VARIABLE SPEED HEADSTOCK DIGITAL DISPLAY OF SPINDLE RPM MOTOR DRIVEN COOLANT SYSTEM REAR SPLASH GUARD. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14523f6f03f-0x10c-
|
|
|
Hardinge 1HP Percision Lathe Model TFB, Tool Set, EXCELLENT Condition
For sale is a Hardinge 1HP Precision Lathe Model TFB and associated tools as shown. This machine is in EXCELLENT working condition and works with accuracy of a brand new machine. It is one of the best machines we have but we need to sell it due liquidation of the business(please see our other tools for sale) We have kept the best for the last batch. Please examine the photos and ask any questions you may have before bidding. Thanks for your interest. IMPORTANT NOTE: ALL RIGGING- DISCONNECTION. REMOVAL, LOADING, SHIPPING, UNLOADING AND INSTALLATION IS THE SOLE RESPONSIBILITY OF THE BUYER. However, if requested by the buyer, I can provide a referral to a local expert rigging company(the buyer will need to contact them and deal with them directly- I have neither a role nor an incentive in this process) Item located in metro Washington DC area(Rockville, ... moreMD 20850) Please ask your questions prior to purchase. Payment is expected within 24 hours of purchase. Thank you for your interest.
|
|
|
(1) USED 25" X 157" LION MODEL C-10Tx4000 GAP BED ENGINE LATHE
SPECIFICATIONS: SWING OVER BED. 25" SWING THRU GAP. 33" SWING OVER CROSS SLIDE. 15.7" DISTANCE BETWEEN CENTERS. 157" LEGTH OF GAP. 10.6" SPINDLE BORE. 4" BAR CAPACITY. 3.9" SPINDLE SPEEDS(18) 10-1.500 RPM SPINDLE MOTOR. 15 HP SPINDLE TAPER. A1-11 FEEDS- LONGITUDINAL. 0.002- 07 IPR- CROSS. 0.0008- 03 IPR RAPID TRAVERSE- LONGITUDINAL. 185 IPM- CROSS. 79" THREADING(64) INCH. 60- 5/32 TPI- METRIC. 0.5- 180- MODULAR. 0.125- 45 TAILSTOCK- TAPER. MT#6- QUILL DIAMETER. 3.5" STROKE. 7.9" DIMENSIONS. 239"L x 54"W x 56"H WEIGHT. 9.000 LBS EQUIPPED WITH: 16" 3 JAW. 24" 4-JAW HOLLOW BODY CHUCK& 24" FACEPLATE(2) STEADY RESTS TAPER TURNING ATTACHMENT TOOL POST AND ASSORTED TURNING AND BORING TOOLS Please contact Jeff at(888) 998-4440 for more information about this machine.
|
|
|
Clausing Colchester lathe model 600 loaded tooling nice machine wow
Clausing Colchester heavy duty lathe with brake stop. Model 60. Loaded with tooling. Quick change post, 5c draw bar,live center, steady rest. Machine is in good condition. We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172
|
|
|
Lathe, 16" Lodge & Shipley Lathe with 2 Axis Readout 3 jaw Model X Serial 42208
You are bidding on a 16" Lodge& Shipley Lathe. Model X, Serial Number 42208. We can load on your two actual flatbed trailer This machine is an extremely rare find. A 2 axis readout already installed. I haven't seen any other lathes on Ebay with readouts already installed, feel free to take a look. I bought it from the military, Mainly because. THEY] had it totally rebuilt from the headstock to the tailstock by a extremely high quality rebuilder, See picture of nametags of rebuilder on tail stock. Lodge& Shipley are known for their massive metal removal and accuracy. When I bought this machine. I had a use for it but due to a severe injury and my age of 66, I can no longer chase many of my dreams/pursuits. This machine also comes with a 3 jaw chuck and because I did not like the toolholder I bought a new set of Aloris Tool ... moreHolders(still in the box. See photos) I'm selling this and my entire machine shop because recently I fell 14 feet off of the scaffolding. Head first and suffered a concussion, four broken ribs, four bruised ribs, and a broken shoulder blade, at 66 years of age, all this is hard to recover from with the added pressure of running a machine shop. As a group everything will be sold at 55% of fair market price. Individually we will ask fair market price. The main reason I purchased this machine. It only has 383.35 hours on it since it was rebuilt. Please feel free to ask questions before bidding. Or I can be reached by calling 804-878-3938. This machine is sold as is. Where is, without warranty, all sales are final, as we are going completely out of business. Please do not use PAYPAL for this purchase. Please pay with CASH at pickup. Please contact us before you hit the Buy It Now Button. We are located in Martinsville/Ridgeway. VA, Henry County near the Martinsville Speedway. We may be able to deliver for the cost of diesel fuel plus $100 a day(an 8 hour day and tolls) Also of interest I am selling my entire machine shop. Lock, stock and barrell. We literaly have hundreds of end
|
|
|
LOGAN LATHE 12" X 36" MODEL 2557-V 1-1/2 HP SINGLE PHASE
LOGAN 12" X 36" ENGINE LATHE. MODEL 2557-V, 1-1/2 HP SINGLE PHASE MOTOR, NEW MOTOR IS WIRED FOR 115 VOLT, VARIABLE SPEED SPINDLE,MACHINE CAN BE SEEN UNDER POWER FOR INSPECTION.MACHINE COMES WITH 3 JAW CHUCK, 4 JAW CHUCK, DOG DRIVER PLATE AND DOGS, SPINDLE REDUCER SLEEVE, LANTERN TOOL POST, 4-WAY TOOL POST, DRILL CHUCK, CENTERS, MANY NEW PARTS, MACHINE MANUAL, MACHINE APPROX. 1500 LBS. LOCAL DELIVERY AVAILABLE, FREE LOADING ON TRUCK OR TRAILER, MACHINE TO BE PAID IN FULL WITHIN 10 DAYS AFTER AUCTION ENDS. QUESTIONS CALL 313-366-1060 OR EMAIL. I PREFER TO BE PAID BY CHECK. THANKS FOR LOOKING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-146cfaef683-0x110-
|
|
|
Logan Lathe Model #6561-H A-1121
You are bidding on a Logan Lathe Specifications Runs Well/Good Condition Good Condition: Item is free of any significant dents. Marks, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have dents. Marks, imperfections that do not impair the functioning of the item(unless specified in the description) Machines/Tools that cost above $500.00 please pay with credit card or wire transfer. We guarantee that the item purchased is packaged exceptionally well. Once it is picked up by a common carrier(UPS etc) we lose control over how the item is handled. If you receive an item and it(or the box) appears damaged. Do not sign or accept. If the item is left at your home or business. And you later find that it is damaged, take pictures and notify the carrier. If you are pleased ... morewith our service please leave positive feedback. Thank you. inkfrogproseries. The machine/item is located in Bay Shore. NY 11706 Shipping costs to buyer location are not included with the machine price We can provide a freight quotation, buyer works directly with the shipper Crating/Palatalizing: Some buyer's need to use a freight company requiring the item to be crated or palatalized. If this is required, we quote crating or palatalizing separately and it is not included with the sale price. We'll quote per customer requirements, customer shipping method& machine design. Shipping can be confusing. Relatively inexpensive, but heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at info@sagmachinery.com or give us a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping. Upon arrival of your machine. Unpack and immediately check for visible damage. Call Sag immediately– you will need to take pictures and email to info@sagmachinery.com. Make sure you note on BOL BEFORE the driver leaves. We accept paypal(info@sagmachinery.com)Or just give us a call at 1-800-
|
|
|
HAAS MODEL HL-2 CNC 2-AXIS TURNING CENTER LATHE, will ship worldwide
HAAS MODEL HL-2 CNC 2-AXIS TURNING CENTER LATHE General Specifications Swing over front apron 20" Swing over cross slide 9.5" Distance between centers 24" X-Axis travel 8.45" Z-Axis travel 20" Rapid traverse rate all axes 710 IPM Spindle nose A2-6 Spinlde Bore 3.00" Spindle speeds 3400 IPM Spindle motor 15/20 HP Turret Capacity 10 Stations Tailstock taper MT#4 Tailstock travel 20" Approx. dimmensions 98"x70"x70" Machine weight(approx) 9.000 Lbs. Motor Specifications Not Available Equipped With Haas 32-Bit CNC Control with 14" CRT Screen RS-232C Port Interface for DNC Operation Tool Presetter 8" 3-Jaw Hydraulic through Hole chuck Rigid tapping Quick Code Programming. 3.5" Floppy disk drive Hydraulic programmable tailstock. Macros Coolant system with Tank& Pump Collet chuck ... moreAll available manuals& tooling Serial Number 61488 Year 1998 Location PROSPECT HEIGHTS. IL
|
|
|
Lathe 16" Lodge & Shipley w/2 Axis Readout 3 jaw Model X Serial 42208 milling
Highest bidder $4995 or above with. No reserve, You are bidding on a 16" Lodge& Shipley Lathe. Model X, Serial Number 42208. We can load on your flatbed trailer. Or deliver for roughly $.65 a rolling mile, Port to port, you must unload at destination. This machine is an extremely rare find. A 2 axis readout already installed. I haven't seen any other lathes on Ebay with readouts already installed, feel free to take a look. I bought it from the military, Mainly because. THEY] had it totally rebuilt from the headstock to the tailstock by a extremely high quality rebuilder, See picture of that on nametags of rebuilder on tail stock. Feel free to Call them And ask them any questions. Lodge& Shipley are known for their massive metal removal and accuracy. When I bought this machine. I had a use for it but due to a Recent life altering. ... moreSevere injury and my age of 66. I can no longer chase many of my dreams/pursuits. I'm selling this and my entire machine shop because recently I fell 14 feet off of the scaffolding. Head first and suffered a concussion, four broken ribs, four bruised ribs, and a broken shoulder blade, at 66 years of age, all this is hard to recover from with the added pressure of running a machine shop. As a group everything will be sold at 55% of fair market price. Individually we will ask fair market price. The main reason I purchased this machine. It only has 383.35 hours on it since it was rebuilt. Please feel free to ask any questions before bidding. Or I can be reached by calling 804-878-3938. This machine is sold as is. Where is, without warranty, all sales are final. As we are going completely out of business. Please do not use PAYPAL for this purchase. Please pay with CASH at pickup. Please contact us before you hit the Buy It Now Button. We are located in Martinsville/Ridgeway. VA, Henry County near the Martinsville Speedway. Another option for delivery. We may be able to deliver for the cost of diesel fuel plus $100 a day(an 8 hour day and tolls) Also of interest I am sell
|
|
|
Clausing 13" Model 5904 Lathe. Set Up With Turret.
This is a Clausing model 5904. Serial 502997. Lathe is set up with a turret tail stock. And a quick load chuck to use with turret. Lathe seems to be in nice shape. It was stored in a damp area and had some rust from moisture which cleaned up well. I have not run the lathe. Current location does not have three phase. Comes with carriage stop as well. Lathe is sold as is. It is available for inspection. We can load and assist with shipping quotes.
|
|
|
15” x 36” Leblond Makino Regal Engine Lathe Model Servo Shift 15C
Please watch video. If you have any question or would like to make an offer please call or text me at 573-578-9890
|
|
|
Hardinge lathe turret boring slide post attachment tb model c
Hardinge turret holder attachment for lathe tool post. Model is c unit is in really good condition. Call mon-fri 9-530pm 727-417-0172 to pay by credit card.
|
|
|
Greco Systems CNC Minifile Model mill milling lathe punch press Machine
Nice Condition Greco Systems CNC Minifile Model UP-ATPN Machine Serial# B8FD67 115V 47-63 Hz 0.5 AMPS Made in USA Comes with Operator's Manual We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172
|
|
|
Clausing 12" Model 5955 Lathe. Set Up With Turret.
This is a Clausing model 5955 Serial 507452 Lathe is set up with a turret tail stock. And a quick load chuck to use with turret. Lathe seems to be in nice shape it came off line. I have not run the lathe. Current location does not have three phase. Comes with carriage stop. Thread dial, 3 jaw chuck, Aloris tool holder quick draw bar and collet closer Lathe is sold as is. It is available for inspection. We can load and assist with shipping quotes.
|
|
|
14" X 50" OKUMA MODEL LB25-2SC-1250 2-AXIS CNC TURNING center lathe - WILL SHIP
Click here to request a quote with price on this stock number from Gray Machine Specification for Stock# 11118 14" X 50" OKUMA MODEL LB25-2SC-1250 2-AXIS CNC TURNING CENTER*Free Loading& Free Shipping in the continental USA* General Specifications Capacity: Swing over bed 24.41" 18.90" over cross-slide) Max. Turning dia x length 14.17" x 25.59" Chuck Work: 14.17" x 49.21" Distance between centers 50" Main Spindle: Spindle dia/bore dia. 4.72" 3.15" Spindle nose JIS A2-8 Tapered bore 3.54" x 1/10 Spindle speeds. No. ranges 65-3500 RPM, Infinitely variable x auto 2 ranges(VAC motor coil switching) Cross-Slide& Saddle: Cross-slide travel(X-axis) 7.28" + 1.77" Saddle travel(Z-axis) 50" Cutting feedrate 0.0001-40.000(X& Z axis) ipr Rapid-traverse rate: X-Axis472 ... moreipm/min. Z-Axis591 ipm/min. Servomotor(brushless) X-Axis2.7 HP Z-Axis5 HP Turret: Type and No. of tool stations V12 Hydraulic Tailstock: Quill dia.stroke 3.94" 4.72" Tapered bore MT No. 5 Main motor Wide range VAC 20/15(30 min/ cont. Coolant pump motor 0.33 HP Power source capacity 46.2 kVA(cable size: over 0.87" sq. Net weight 15.620 Equipped With OSP 5020 CNC Controls IGF Color Graphics Tool Nose radius comp Inch Metric switchable User Task 2 Expanded Auto chamfering 12 Position Turret 3.15" Spindle Bore Hydraulic Tailstock Splash Guards 10" 3-Jaw chuck Chip Conveyor Serial Number 0202-0656 Year 1990 Location PROSPECT HTS.IL
|
|
|
MACHINIST TOOLS LATHE MILL Hobby Micro Mark Jig Scroll Saw for Model Pocher Etc
THE WOOD STAND IS NOT INCLUDED IN THE SALE. PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. It is working but is being sold as is. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email ... moreme for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1
|
|
|
Mori Seiki Model DL-20 Twin Spindle Twin Turret CNC Lathe
Item#3860 Mori Seiki Model DL-20 Twin Spindle Twin Turret CNC Lathe Equipped With: Mori MFD6 CNC Control Tool Presetters Power Partition Rear Discharge Chip Conveyor Power Doors Machine Specifications: Maximum Swing: 12.6" Maximum Work Diameter: 12.6" X-Axis Travel: 9.05" Z-Axis Travel: 19.68" X-Axis Rapid Traverse: 1.200 IPM Z-Axis Rapid Traverse: 1.300 IPM Distance Between Spindles: 42.9" Max Bar Dia: 2.01" Spindle Bore: 2.40" Spindle Speed: 4.750 RPM Spindle Drive Motors: 2) X 20 HP AC Tool Capacity: 2) X 12 Postions Each Tool index time: 1.4 Seconds Shipping Point: Price: $ 46.500.00 SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 kevinb@ontargetmachines.com
|
|
|
Used Milltronics Model TL15 CNC Lathe
Item#3903 Used Milltronics Model TL15 CNC Lathe Equipped With: Machine Specifications: CAPACITY: Bed Length 40" 1000 mm Swing Over Bed 15.7" dia. 400 mm Swing Over Cross Slide 8.3" dia. 210 mm Travel(X Axis) Cross Slide 10" 255 mm Travel(Z Axis) Long Slide 40.4" 1025 mm Center Height 7.9" 200 mm Center Distance 39.4" 1000 mm Bed Width 11.8" 300 mm Machine Weight 4800 lbs 2180 kg Maximum Weight of Part With Chuck No Center 70 lbs. 31 kg Maximum Weight of Part With Chuck with Center 700 lbs. 320 kg Maximum Weight of Part with Centers and Steady Rest 1400 lbs 635 KG SPINDLE Closed Loop Vector Spindle Drive Standard Standard Standard Horsepower 12/10 HP 9/7.5 kw Spindle Bore 2.6" 65 mm Spindle Nose Type Camlock D1-6 Spindle Taper MT#5 Spindle Speed L = 20- 675 H=675- 3000 Constant Surface Feature and ... moreThreading Package A 3 Jaw Chuck Size- 8" 200 mm Tailstock Quill Travel 8.7" 220 mm Tailstock Quill Diameter 2.7" 68 mm Tailstock Quill Taper MT#4 Tailstock Safety Switch Standard TOOLING ACCESSORIES Dorian Quadra Post Option- QITP 35) 3/4" 20 mm 8 Station Automatic Turret Option- 5/8" 5/8" x 3.5" PERFORMANCE Rapid Traverse 300 ipm 7.6 mpm Feedrate Range.1-100 ipm 2.5- 2540 mmpm Position Accuracy See note.0004" 010 mm Repeatability See note.0004" 001 mm.0003" 0076 mm Resolution.0001" 001 mm Shipping Point: Price: $ 19.500.00 SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 kevinb@ontargetmachines.com dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-149484ad45c-0x10e-
|
|
|
Monarch 18.5" x 30" Geared Engine Lathe Model 16-W B-0049
You are bidding on a Monarch Geared Head Engine Lathe Specifications Swing Over Cross Slide: 11′ Swing Over Compound Slide: 4′ Distance from Floor to Center: 42-1/2′ Distance Between Centers: 30′ Mount: D1-6 Spindle Bore: 1-9/16′ Number of Spindle Speeds: 16 Range of Spindle Speeds: 16 to 650 rpm Inch Threads: 1.5 to 92 tpi Cross Slide Travel: 13′ Compound Rest Travel: 3-3/4′ Spindle Travel: 6′ Taper of Center: 4 Morse Taper Spindle Diameter: 2-7/8′ Width of Bed Face: 16-3/4′ Length of Bed: 64′ Motor: 5 Horsepower. 220/440 Volt, 1,800 rpm, 14/7 Amp, 60 Hz, Three Phase Electrical: 220/440 Volt. Three Phase(Currently wired for 220 Volt, Three Phase Overall Dimensions: 96′ x 43′ x 53′ tall Good Condition Good Condition: Item is free of any significant dents. Marks, imperfections that would impair the functioning of the item(unless specified ... morein the description) Good Usable Condition: Item may have dents. Marks, imperfections that do not impair the functioning of the item(unless specified in the description) Machines/Tools that cost above $500.00 please pay with credit card or wire transfer. We guarantee that the item purchased is packaged exceptionally well. Once it is picked up by a common carrier(UPS etc) we lose control over how the item is handled. If you receive an item and it(or the box) appears damaged. Do not sign or accept. If the item is left at your home or business. And you later find that it is damaged, take pictures and notify the carrier. If you are pleased with our service please leave positive feedback. Thank you. inkfrogproseries. The machine/item is located in Bay Shore. NY 11706 Shipping costs to buyer location are not included with the machine price We can provide a freight quotation, buyer works directly with the shipper Crating/Palatalizing: Some buyer's need to use a freight company requiring the item to be crated or palatalized. If this is required, we quote crating or palatalizing separately and it is not included with the sale price. We'll quote per customer requirements, custome
|
|
|
South Bend Model A 9" lathe 10K Lead Screw Support Bracket. Good Shape
Good shape. The babbit is still in good shape. This SB lathe was used as a wood lathe. Please look at all the pic's as they are part of the description. If you have any questions please ask! Winning bidder has 3 days after end of auction to pay other wise item will be relisted if more time is needed please message me. I only ship to the lower 48 states in the U.S.A. Thanks and happy bidding!
|
|
|
Hardinge ajustable tool setting gage for lathe machine model c2-a
Hardinge adjustable tool gage The Hardinge Tool setting gage is an essential aid for fast. Accurate setting of tool bits and boring bars to the spindle centerline of your Hardinge Lathe. The ground surface(round disc protruding) is for setting tools cutting on front of work piece. The surface below this piece is used for setting tools cutting on rear of work piece. The gage is adjustable for its respective machine. Specifications: Diameter: 1" Overall Length: 5" Comes as shown in pictures. NICE! HARDINGE L2 ADJUSTABLE SETTING GAGE We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172. Located cr sh 1 d-9.
|
|
|
Universal Casting, 4 inch lathe wheel with knob model No.KN85 ________________L
Lathe wheel with knob Knob 1 1/2 inch diameter wheel 4 inch diameter 3/8 inch shaft without tread we use recycled materials for packing combine shipping check my other listings international bidders; e-mail me for shipping quote before bidding. And pay after You receive invoice absolutely not responsible for foreign country customs: retards. Detains, lags, tardiness, delays, and slow downs buyer is responsible for all duty and customs fees.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14b798fc59f-0x100-
|
|
|
Eagle Rock Clamp Style Knurling Tool Model K1, 0"-6", 3/4"x3/8" Knurl, CNC Lathe
From a small fabrication shop that closed near Minneapolis I have for sale a: Eagle Rock Clamp Style Knurling Tool Model: K1-203 Capacity: 0" to 6" Knurl Size: 3/4" x 3/8" x 1/4" Shank: 1" Used for Manual and CNC Machines Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know.
|
|
|
Clausing Colchester model 8031VS 15 x 50 Engine lathe (Variable Speed)
Clausing Colchester model 8031VS 15 x 50 straight bed Engine lathe with 10HP(7.5kw) motor- S/N LVT50SILJV- new 07/1993 Newall 2 axis C80 Readouts 8" Pratt Bernard 3 jaw chuck D1-6 camlock 6" steady rest Aloris CXA tool post with9 Holders 15.7" swing over bed 9.7” swing over cross-slide 14-275 40-795 125-2500 RPM(3 ranges all variable) feeds.0007-048 Metric Thread Pitches 0.2-14MM(51) Imperial T.P.I. 2-56(56) 2.125” bore thru spindle Coolant tank and pump No. 5 Morse taper in tail stock weighs 3300 LB. We are the original owner of this machine and it has been well maintained Machine wired 416- we have transform to go from 480 to 416 or 240 to 416(buyers choice) FOB loaded on your truck Subject to prior sell can be seen under power by calling 937-417-5576
|
|
|
25" X 122" DAINICHI MODEL: DLX-65X3000 CNC/MANUAL FLAT BED LATHE
We are pleased to offer the following for your consideration: One used 25" X 122" DAINICHI MODEL: DLX-65X3000 CNC/MANUAL FLAT BED LATHE NEW: 2001 Specifications: SWING OVER BEDWAYS. 25.5" SWING OVER CARRIAGE. 15" MAXIMUM MACHINING DIAMETER. 25.5" MAXIMUM DISTANCE BETWEEN CENTERS. 122" MAX. LOADING CAPACITY INCLUDING WEIGHT OF THE CHUCK WITH WORK BETWEEN CENTERS. 3306 LBS MAX. CUTTING FORCE. 1386 LBS SPINDLE BORE. 4.92" SPINDLE SPEEDS 6 RANGES 2 STEPS. 12 ~ 900 RPM CONSTANT SURFACE SPEED CONTROL FOR GOOD SURFACE ROUGHNESS SPINDLE NOSE TYPE. A2-11 SPINDLE DRIVE MOTOR. 15 HP MAX. X-AXIS TRAVEL. 14.96" MAX. Z-AXIS TRAVEL. 118" CUTTING FEED X/Z. 0.002 ~ 0.157" TAILSTOCK BODY CAN TRAVERSED BY AIR FLOAT SYSTEM TAILSTOCK TAPER. MT# 5 TAILSTOCK SPINDLE STROKE. 7.87" TAILSTOCK SPINDLE DIAMETER. ... more3.54" MACHINE WEIGHT. 11.000 LBS EQUPPED WITH: FANUC 21IT CNC CONTROL DAINICHI'S OWN DESIGNED HANDLE CAN ACHIEVE A MANUAL FEED. AUTO. MECHANICAL FEED, CIRCULAR TURNING AND TAPER TURNING. SIMULTANEOUS 2 AXES CONTROL* DORIAN QUICK CHANGE H-4 WAY TOOL-POST* 20" 3-JAW MANUAL CHUCK* 12" ROLLER TYPE STEADY REST* COOLANT TANK& PUMP* LIVE CENTERS* REPLACEMENT COST OVER $190.000 Excellent Condition. Inspect Under Power* View Video On Our Website Link: Price: $79.000.00 Click picture for more views See this machine on our web site. SALES sales@pridemach.com PRIDE MACHINERY SALES. INC. TEL-631-586-5252. EMAIL:
|
|
|
Bed Turret for Eguro Lathe Model 62-2A B00470
Bed Turret for Eguro Lathe Model 62-2A B00470 Item Description You are bidding on a Bed Turret for a Eguro Lathe Model 62-2A Specifications 5/8" Holes Good Condition Good Condition: Item is free of any significant marks. Dents, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have marks. Dents, and imperfections but the functioning of the item is not impaired(unless specified in the description) Shipping& Payment We accept paypal(info@sagmachinery.com)Or just give us a call at 1-800-334-0175 or 1-631-586-1768 with your credit card number. Shipping can be confusing. Relatively inexpensive. But heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at sagsupply@att.net or give ... moreus a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping. inkfrog terapeak. InkFrog Analytics.
|
|
|
Quick-Acting Crosslide for Eguro Lathe Model 62-2A B-0469-10
Quick-Acting Crosslide for Eguro Lathe Model 62-2A B-0469-10 Item Description You are bidding on a QA Crosslide for a Eguro Lathe Model 62-2A Specifications Good Condition Good Condition: Item is free of any significant marks. Dents, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have marks. Dents, and imperfections but the functioning of the item is not impaired(unless specified in the description) Shipping& Payment We accept paypal(info@sagmachinery.com)Or just give us a call at 1-800-334-0175 or 1-631-586-1768 with your credit card number. Shipping can be confusing. Relatively inexpensive. But heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at sagsupply@att.net or give ... moreus a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping. inkfrog terapeak. InkFrog Analytics.
|
|
|
Quick-Acting Tailstock for a Eguro Lathe Model 62-2A B-0468-10
Quick-Acting Tailstock for a Eguro Lathe Model 62-2A B-0468-10 Item Description You are bidding on a Quick Acting Tailstock Specifications For use on a Eguro Lathe Model 62-2A Good Condition Good Condition: Item is free of any significant marks. Dents, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have marks. Dents, and imperfections but the functioning of the item is not impaired(unless specified in the description) Shipping& Payment We accept paypal(info@sagmachinery.com)Or just give us a call at 1-800-334-0175 or 1-631-586-1768 with your credit card number. Shipping can be confusing. Relatively inexpensive. But heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at sagsupply@att.net ... moreor give us a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping. inkfrog terapeak. InkFrog Analytics.
|
|
|
2nd Operation Lathe, MSC Model LHT-25B turret lathe
Up for sell is a small turret lathe needs some tlc would make a great project for someone comes with all collects pictured has a coolant tank and two drill chucks is 220v I will skid at no charge buyer is responsible for all Shipping thanks 336 479 6847 Tripp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14bcd12598d-0x112-
|
|
 |