|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$750.00 Shipping Condition: Used Location: Fontana, United States Complete used skid mounted pump setup removed from working unit.
Buy It Now
Condition: Used Location: Parowan, United States Up for sale is a COASTAL GROUT PLANT Grout Pump. This is a stationary grout pump skid mounted with electrical panels, pump gearbox and valves. The remaining ... morebalance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States VEVOR Automatic Optical Level w/26x Magnification Power Lens w/Compensator. VEVOR Lab Single Channel 0.5-10μl 10-100μl 100-1000μl Micropipette Pipettor. ... moreVEVOR Automatic Optical Level 24X Optical Level Kit Waterproof w/Compensator.
Buy It Now
Condition: New Location: Schenectady, United States It has not been tested. Our facility includes a truck-height loading dock for convenience. Local pickup is also available. Everything included is shown ... morein the photos. If there are multiple available for sale you may not receive the one photoed, but they are all in similar condition.
Buy It Now
Condition: Used Location: Woodruff, United States MANUFACTURE: GRUNDFOS.
Buy It Now
Condition: Used Location: United States Standard Features Maximum Throughput: 1.000 GPH Optional Features Automatic& Semi-Automatic Available UL approved control panel· Dry chemical ... morefeeder system SHREDMASTER In-Line Agitator· Fully automated package 2 Cubic yard dewatering hopper· Extra capacity dewatering Fully enclosed clean operation Effluent pump package· Stainless steel or Equipment Measurements(750 g) polypropylene construction Length: 4’8” Width 5’1” Height: 8’10” Get Into Compliance: TSS. BOD, COD, Chrome, Copper, Nickel, Lead, Mercury, Molybdenum, Emulsified and Low Solubility Oil& Grease. Arsenic, Color and Much More Questions? Call Polychem Environmental At(804) 744-8377 Carl Rogers Direct(804) 249-0485 Andrew Westbrook Direct(804) 920-4822
Buy It Now
Condition: Used Location: Sun Valley, United States The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best ... moreof our ability.
Buy It Now
$600.00 Shipping Condition: New Location: Missouri City, United States 20 Hp @ 3500 rpm TECO Premium Efficiency Inverter Duty Motor. 230/460v/3Phase, 60 hz. Long-coupled design.
Buy It Now
Free Shipping Condition: New – Open box Location: Clarksburg, United States This includes securing item with steel banding and shrink wrapping.
Buy It Now
$600.00 Shipping Condition: New Location: Missouri City, United States Impeller trim: 6.375". Motor is a Teco 15 hp @ 3600 rpm, XP design, 230/460V/3Phase, 60Hz operation.
1d 15h 50m 34s 0 bids
$19500.00 Now
Condition: New – Open box Location: Woburn, United States Fybroc pump mounted onto a skid coupled to a 30HP GE motor.
Buy It Now
Free Shipping Condition: New – Open box Location: Clarksburg, United States This includes securing item with steel banding and shrink wrapping.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description Are you still worried about watering your farm too slowly? This 6.5HP irrigation water pump will help you get your watering done very quickly ... moreand well. It has an aluminum pump body for greater durability and long service life. The extra power and large flow rate will allow you to work more efficiently. Key Features Great Durability: It is mainly made of high-quality aluminum and iron, and has undergone spraying and welding processes, so it has good wear resistance, corrosion resistance, high temperature resistance, and impact resistance, making it very sturdy and durable. High Efficiency: It adopts a powerful four-stroke OHV engine, which can generate more power. The 6.5hp, 210cc engine has a high speed of 3600r/min, achieving a 1271.33ft³/h hourly flow rate, 23ft self suctio.
Buy It Now
Condition: Used Location: Apollo, United States Really nice pump system with Chemical Resistant Piping.
Buy It Now
Condition: New Location: Apollo, United States Balance Tank Job #: BT-1002. Year of Mfg: 2013-14.
Buy It Now
Condition: Used Location: Roy, United States It has a stainless steel head and tempered stainless steel valves and valve seats. See my photos for the code breakdown and build materials on this pump. ... moreIf you were to add a VFD you could do all kinds of cool stuff with this motor and pump.
Buy It Now
$600.00 Shipping Condition: New – Open box Location: Las Vegas, United States Wheatley 5P-200A Reciprocating RO Pump. Skid mounted, rebuilt. Out of refurbished Military 600 GPH ROWPU (water purification unit). NSN 4320011339205. ... moreManufacturer: Wheatley. NSN: 4320-01-133-9205.
Buy It Now
Condition: Used Location: Carbondale, United States 2001 Thompson 6TSV 6" water pump, 6" inlet/outlet, 45 PSI max operating pressure, 3" solids handling, 1430 GPM max flow, 100' max head, prime assist, ... moreJohn Deere 4045 diesel engine, skid mounted, fully mechanical. VERY WELL MAINTAINED UNIT, STRAIGHT OUT OF A LARGE FLEET, READY TO GO BACK TO WORK -- BEST PRICE ANYWHERE !! https://www.youtube.com/watch?v=styRrf_Hqzc
Buy It Now
Condition: Used Location: Belmont, United States Diaphragm Pump Assembly. Condition is Used. ". Ingersoll Rand Pump Part # 666 1A3-3EB-C. Height 16" Length 12 11/16". Freight not included!
Buy It Now
$228.18 Shipping Condition: New Location: San Antonio, United States Berkeley Pump B8587W CCW, NPT WATER TRUCK PUMP WITH 9" IMPELLER.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description Are you still worried about watering your farm too slowly? This 6.5HP irrigation water pump will help you get your watering done very quickly ... moreand well. It has an aluminum pump body for greater durability and long service life. The extra power and large flow rate will allow you to work more efficiently. Key Features Great Durability: It is mainly made of high-quality aluminum and iron, and has undergone spraying and welding processes, so it has good wear resistance, corrosion resistance, high temperature resistance, and impact resistance, making it very sturdy and durable. High Efficiency: It adopts a powerful four-stroke OHV engine, which can generate more power. The 6.5hp, 210cc engine has a high speed of 3600r/min, achieving a 1271.33ft³/h hourly flow rate, 23ft self suctio.
Buy It Now
$220.18 Shipping Condition: New Location: Fresno, United States 1954 VIKING Pump Co. Catalog IDEX Corp. Asbestos? Welcome. Jody For your consideration a 1954 VIKING Rotary Pumps Catalog. It’s loaded with information ... moreand illustrations for several types of Industrial Pumps. Viking Pump has been sued for asbestos. This catalog does not say asbestos, but this catalog does say their pumps have extra long stuffing boxes, the most likely place for the asbestos. In excellent condition with 8 pages. Guaranteed 100% original. We do not sell reproductions. We ship our vintage catalogs flat in heavy duty cardboard so they arrive in great shape. Yes we can combine shipping with items of the same shape. Only when the payment is made all in one. eBay no longer provides the shipping insurance option, if you would like insurance please let me know before you send payment. Questions are welcome. Thank you for looking. Jody My rating grades are: Poor Acceptable Fair Good Very-Good Excellent Near-Mint INTERNATIONAL BIDDERS- Buyer pays all extra taxes and custom fees. NO PAYPAL from an unconfirmed address. I realize the Express mail is not cheap the trouble is Paypal demands deliver confirmation. Express mail is the only international shipping that has deliver confirmation. The only other option I know would be don’t send Paypal and I ship it to any place you request. Let me know if you would like to discuss other payment. Thank you for your understanding. Jody Canadian buyers-for shipping first class with registered mail it cost about 18 USA Dollar. For considerably less shipping cost I can ship First Class with out registered mail if you don’t use Paypal. I accept US notes. For another option to avoid the Papal mandate for delivery confirmation.
Buy It Now
$6.99 Shipping Condition: New – Open box Location: Plant City, United States Water temperature variation can cause major problems with sample cooling. Seasonal temperature variation of plant service water also affects sample temperature ... morestability and analyzer readings. A Sentry CWMS cooling water mixing skid can solve these issues.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States 1/2" hydraulic quick- disconnect couplers (ISO 16028 Flat Face interchange). Our complete set of 1/2" Flat Face coupler/plug x 1/2" NPT Skid Steer quick ... moredisconnects are high pressure non-spill quick connects that are becoming increasingly popular.
Buy It Now
$16.00 Shipping Condition: Used Location: Coffeyville, United States HYPRO DUPLEX PLUNGER PUMP. 1/2" NPT INLET. 3/8" NPT OUTLET. 5/16" KEYSEAT. 1-5/8" LENGTH.
Buy It Now
Free Shipping Condition: New Location: Stevens, United States
Buy It Now
$200.00 Shipping Condition: New – Open box Location: Mancos, United States Tandem hydraulic drive pump fits GEHL 6635 single speed skid steer. Brand new 1 has open box, 1 has closed never opened box. GEHL part number 136390 or ... more136391 either one fits the GEHL 6635 single speed. Stored inside, sealed ports no damage or contamination.
Buy It Now
$400.00 Shipping Condition: Used Location: Ripley, United States Blackmer Snp 2 Stainless Pump Skid With 5hp Motor. Pulled Out Running!. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$108.08 Shipping Condition: Used Location: Clarksville, United States For sale is a tandem pump assembly taken off a 2005 Mustang 2086 skid steer. The unit was fully functional when removed from my skid steer. The decision ... moreto part out the machine was made due to a failing left side final drive. We opted to get newer machine The skid steer had approximately 1200 hours according to the meter. Please note that this unit is not brand new. It is being sold as is, with no warranty or returns. The new owner will be responsible for checking fitment and compatibility. While it worked flawlessly when removed, I cannot be held responsible for contamination or damage during shipping or installation. If you have any questions, please don't hesitate to reach out. Thank you.
Buy It Now
$86.89 Shipping Condition: Used Location: Harvey, United States This hydraulic pump is designed for use with Caterpillar skid steer loaders. It is compatible with equipment from the year 2006 and has a model number ... moreof 218-6927. This pump is made by the brand CAT and is part of the PS-B series. It is a reliable and high-quality option for your heavy equipment needs.
Buy It Now
$15.00 Shipping Condition: Used Location: Glen Haven, United States Up for sale is a hydraulic pump. It spins over when turned by hand, but has not been tested on a running skid loader. What you see is what you get.
Buy It Now
Condition: New Location: Del Rio, United States Units unused Heated & Insulated skid mounted water pump with cutoff. These units have 300 gallon tanks with Darley ES2 2hp water pump systems. The electrical ... moreis 230V single phase. These Pump systems can be used for ANY purpose.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Type: Car Tire Inflator Pump. - Portable and convenient, maintain the correct tire pressure to ensure safe driving and save gasoline. Digital screen & ... moreautomatic stopping function: The big blue backlight digital screen is convenient for user to set the preset pressure.
Buy It Now
$28.32 Shipping Condition: Used Location: New Brunswick, United States If possible we will put more than 1 larger item on a skid also. This may cost you a little more but you will save on trucking. For example a 100 lb. Therefore ... morethey are sold AS IS, AS PICTURED.
Buy It Now
Condition: New – Open box Location: Clarksburg, United States This includes securing item with steel banding and shrink wrapping.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 2" Petrol Water Transfer Pump Commodity parameters: Size: 490×420×400mm (19.29*16.5*15.7in) Weight: 20 kg Power type: manual Speed: 3600 (r/min) Suitable ... morefor: vegetables, lawns, roadside hedges, fruit trees, tea trees Displacement: 210 (cc) Applicable place: Applicable place Power: 6.5HP 4.8KW Inlet and outlet joint diameter :2 inches Maximum flow :36 m3 /H Fuel: Gasoline Maximum lifting height :28 m Tank capacity :3.6L Maximum suction :7 m Reminder: This is a clean water pump, not suitable for pumping rotten leaves, fruit pits, sand, stones, etc. Package list: 1 * Pump 2 * Inlet and outlet joint 2 * Fastening nut 2 * Sealing rubber ring 3 * Fastening ring 1 * Plastic filter 1 * contact of filter 4 * Anti-skid feet 1 * Wrench 1 * Manual.
Buy It Now
Condition: Used Location: New Brunswick, United States 2" OD Threaded Pipe & 1/2" ID Sanitary Fitting. Gary may need to get you a proper class based on what you are buying. Therefore they are sold AS IS, AS ... morePICTURED.
Buy It Now
Condition: Used Location: Wichita Falls, United States 5000GPM @200' TDH. Well maintained skid mounted unit from plant shut down. Ready to go to work.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description Are you still worried about watering your farm too slowly? This 6.5HP irrigation water pump will help you get your watering done very quickly ... moreand well. It has an aluminum pump body for greater durability and long service life. The extra power and large flow rate will allow you to work more efficiently. Key Features Great Durability: It is mainly made of high-quality aluminum and iron, and has undergone spraying and welding processes, so it has good wear resistance, corrosion resistance, high temperature resistance, and impact resistance, making it very sturdy and durable. High Efficiency: It adopts a powerful four-stroke OHV engine, which can generate more power. The 6.5hp, 210cc engine has a high speed of 3600r/min, achieving a 1271.33ft³/h hourly flow rate, 23ft self suctio.
Buy It Now
Condition: Good Location: Cedar Grove, United States Manual Hand Pump Portable Container - Pallet & Skid Tilter 2200 LB Capacity
Buy It Now
$750.00 Shipping Condition: Used Location: Sparks, United States This is currently set up on 480v 3Ph power, and we are unable to power it up. This will aide in providing a more accurate quote. This fee will vary depending ... moreon the size of the item. Automotive / Aviation.
Buy It Now
Condition: Used Location: Palm Bay, United States I have personally used this pump, and everything worked perfectly.
Buy It Now
$5.00 Shipping Condition: New Location: Chino, United States 2" Petrol Water Transfer Pump Commodity parameters: Size: 490×420×400mm (19.29*16.5*15.7in) Weight: 20 kg Power type: manual Speed: 3600 (r/min) Suitable ... morefor: vegetables, lawns, roadside hedges, fruit trees, tea trees Displacement: 210 (cc) Applicable place: Applicable place Power: 6.5HP 4.8KW Inlet and outlet joint diameter :2 inches Maximum flow :36 m3 /H Fuel: Gasoline Maximum lifting height :28 m Tank capacity :3.6L Maximum suction :7 m Reminder: This is a clean water pump, not suitable for pumping rotten leaves, fruit pits, sand, stones, etc. Features: 1. Convenient operation 2. High efficiency 3. Low fuel consumption Package list: 1 * Pump 2 * Inlet and outlet joint 2 * Fastening nut 2 * Sealing rubber ring 3 * Fastening ring 1 * Plastic filter 1 * contact of filter 4 *.
Buy It Now
$450.00 Shipping Condition: Seller refurbished Location: Grapevine, United States • Impeller type: Open. • Head: 23-125 m.
Buy It Now
Condition: New – Open box Location: Galion, United States You will receive what’s in the pictures.
Buy It Now
Condition: Used Location: Millersburg, United States This pump is part Variable Ratio Proportioner. Part Number Bulldog. Air Motor Bulldog 208-356. Lift Tables. Skid size is 54" long 24" wide 18" tall 140 ... morelbs. Available on select orders within USA lower 48 states.
Buy It Now
$350.00 Shipping Condition: Seller refurbished Location: Hobbs, United States The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The Magnum has an ... moreopen impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids.
Buy It Now
Free Shipping Condition: New Location: United States GPH: 4,500 Maximum. Engine Cycle: 4 Stroke. Engine Start: Pull. Power Source: Honda GX200 Engine. Suction Lift (ft): 15. Engine Fuel Capacity: 0.8. Lower ... more48 United States.
Buy It Now
Free Shipping Condition: New Location: Clarksburg, United States This includes securing item with steel banding and shrink wrapping.
Buy It Now
Condition: Used Location: Texas City, United States EFF.: 89.5/ 87.5, MIN. EFF: 87.5/ 85.5, DESIGN: B, SERIAL NO: RZ6144526005, PWN/VDF DUTY: VT HZ, CT HZ, CP HZ, S.F.1.0 (60HZ BASE), TYPE: AEHE UW, CAT. ... moreF, 150 DEG.
Buy It Now
Free Shipping Condition: New Location: Stevens, United States
Buy It Now
$153.60 Shipping Condition: New Location: Temecula, United States This was just removed from service. GH/ Alfa-lavel tri-lobe sanitary pump. Unit is"used" but still has years of use left in it. any questions ... moreplease ask. The gearcase will have to be drained of oil for UPS shipping and would need to be re-filled before use. unit includes the fitting adaptors as shown to NPT thread. and the 2 fittings alone new are over a hundred bucks. Shipping Weight 71 lbs TERMS: items are sold AS-IS/ as described. Some items offered with return privilege. Some are sold without please read return policy for specific item/s. Please ask any questions about payment, item condition or any other concerns before bidding, We try and ship promptly within 2-3 days of receiving payment. Tracking number provided upon shipment of goods. We may ship small items via post office at our discretion. We do not ship freight collect on UPS accounts. We do not ship any other method i.e. FedEx etc. No international bidders at this time. PAYMENT: we accept paypal and other forms of payment please inquire. We try and answer all requests and questions in 24hours but do service and travel so we are not always available to get back to you in a few hours depending on schedule. Thanks for looking.
Buy It Now
Free Shipping Condition: New – Open box Location: Clarksburg, United States This includes securing item with steel banding and shrink wrapping.
Buy It Now
Free Shipping Condition: New – Open box Location: Clarksburg, United States This includes securing item with steel banding and shrink wrapping.
Buy It Now
Free Shipping Condition: New Location: United States Fostoria P43-Fss-3 Infrared Overhead Electric Heater, Aluminum, 480 V. Lincoln Electric Kp1696-045S Solid Drive Roll Kit. 045". Yellow Jacket 25985 Manifold ... moreHose Set,60 In,Red,Yellow,Blue. Light Industrial.
9d 2h 55m 19s 0 bids
$6400.00 Now
Condition: Used Location: Dayton, United States (one) Cat Triplex plunger pump, 3801K.0110 with ABB electric motor, rated at 43kW @ 440 vac, 1778 rpm. This was part of a Sonolator pump skid, new in ... more2007. Removed in working condition but has been in storage for years.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States NEW 2inch 6.5HP Gas Water Semi Trash Pump Petrol High Pressure Garden Irrigation Commodity parameters: Size: 490×420×400mm (19.29*16.5*15.7in) Weight: ... more20 kg Power type: manual Speed: 3600 (r/min) Suitable for: vegetables, lawns, roadside hedges, fruit trees, tea trees Displacement: 210 (cc) Applicable place: Applicable place Power: 6.5HP 4.8KW Inlet and outlet joint diameter :2 inches Maximum flow :36 m3 /H Fuel: Gasoline Maximum lifting height :28m/92ft Tank capacity :3.6L Maximum suction :7m/23ft Product Size: 46.2*36*38.7cm/18.19*14.17*15.24inch Fuel Consumption Rate: 360ml/kw.h Features: 1. Convenient operation 2. High efficiency 3. Low fuel consumption Package list: 1 * Pump 2 * Inlet and outlet joint 2 * Fastening nut 2 * Sealing rubber ring 3 * Fastening ring.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 2" Petrol Water Transfer Pump Commodity parameters: Size: 490×420×400mm (19.29*16.5*15.7in) Weight: 20 kg Power type: manual Speed: 3600 (r/min) Suitable ... morefor: vegetables, lawns, roadside hedges, fruit trees, tea trees Displacement: 210 (cc) Applicable place: Applicable place Power: 6.5HP 4.8KW Inlet and outlet joint diameter :2 inches Maximum flow :36 m3 /H Fuel: Gasoline Maximum lifting height :28 m Tank capacity :3.6L Maximum suction :7 m Reminder: This is a clean water pump, not suitable for pumping rotten leaves, fruit pits, sand, stones, etc. Package list: 1 * Pump 2 * Inlet and outlet joint 2 * Fastening nut 2 * Sealing rubber ring 3 * Fastening ring 1 * Plastic filter 1 * contact of filter 4 * Anti-skid feet 1 * Wrench 1 * Manual.
Buy It Now
Free Shipping Condition: New – Open box Location: San Antonio, United States This Gast piston air compressor is a powerful and reliable unit suitable for a variety of applications. With oilless lubrication and multiple cylinders, ... moreit delivers consistent performance, making it an ideal choice for demanding tasks. This unit has a length of 17.000 inches and a width of 15.000 inches, with a weight of 15.0000. The Gast 1LAA-46S-M100GX 14/Skid 1Laa-46S-M100Gx Piston Pump is made in the United States and comes in a package quantity of 1. It is a great addition to any business or industrial setting, providing high-quality performance that you can rely on. Please note that California's prop 65 warning applies.
Buy It Now
$43.13 Shipping Condition: New Location: Altoona, United States These can be used with a skid steer as long as the flow does not exceed 7.5GPM (an idle for many skid steers). This is a hydraulically powered water pump ... morefor a water truck or other hydraulic source. equipped with cam lock fittings on inlet and outlet.
|
|
|
|
G&H GHC-10 Centrifugal Pump w/ 1HP Unimount Motor & Controller on Skid
G&H GHC-10 Centrifugal Pump w/ 1HP Unimount Motor& Controller on Skid Description G&H GHC-10 Centrifugal Pump w/ 1HP Unimount Motor& Controller on Skid This item requires freight shipping. Please contact us for a quote prior to purchasing. Manufacturer G&H Manufacturer Part Number GHC-10 Item/Ship Weight 138 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in ... morethe photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item may require palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 44360 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to con
|
|
|
Goulds 7.5 HP SS Pump Skid w/ GF Signet Flow Meter & Butteryfly Valve 4" Flange
Goulds 7.5 HP SS Pump Skid w/ GF Signet Flow Meter& Butteryfly Valve 4" Flange Description. This is a USED Goulds Pump 4SH2K52B0 Stainless Steel 7.5 Horse Power Centrifugal Pump Skid with(2) Pumps and all valving and componets. This is the perfect design for a chilled water system ready to hook into your existing system with minimal pipeing. 2) Goulds Centrifugal Pumps Stainless Steel Construction with 6.38 Impeller and 7.5 hp Baldor Motor. Bray Butterfly Valves EPDM 3" Diaphragm Valve on Discharge Header 3" Union Check Valve Siemens RSM Isolator Module/ Safety Switch(2) Siemens DSe-ST Feeder Modules Siemens ET 200 Pro Interface Module Georg Fischer Signet Flow Transmitter and Receiver Payment. We accept Paypal. Visa, Mastercard, Company Checks, Bank Wire Transfers, and Cashiers Checks. Buyers are required to pay for items ... morewithin 7 days of winning bid. No items will be shipped until payment is made and verified. NOTE: On occasion Paypal may place your payment"under review" This is a security feature to protect the buyer and seller, and may take up to 48 hours to complete. Once payment is verified we will ship your item. Thank you. Shipping. We are always happy to accommodate our customers and fully understand the importance of timely shipping. Please view our shipping policies below to better understand how we can help you. All"non-freight" orders placed before 10:00 A.M. EST will be shipped the same day. All orders placed after 10:00 A.M. EST will be shipped on the following day. All smaller items 70 lbs. and under ship USPS Priority Mail. Larger packages up to 150 lbs. will be shipped UPS Ground Service. Next Day Service is available if order is placed by 3:30 P.M. EST. For Emergency Orders call 800-380-4913. Tracking numbers will be posted automatically and emailed to the buyer. If you would like for us to use your UPS. USPS, FEDEX, or DHL account numbers, be sure to post a note on your invoice with the shipping address and your account number. We will insure items at the
|
|
|
75HP Buffalo ANSI CRE-ECO Pump Skid 1225GPM @ 164' (71psi) 50hZ
Buffalo Pump Model CRE-ECO S/N: 9743085S-001. 1225gpm@ 164' Size 8011 Rotation CW, 2950RPM 9-1/8" Impeller. Includes 75HP GE Motor, 3Phase 380V, 50Hz, TEFC, 2955RPM. Cast Iron Bronze Fitted. Operational when removed from service. Contact Dave@ 804-642-0217 for more information. EMAIL CALL FOR PAYMENT INFORMATION SPECIAL NOTE: DUE TO HAZARDOUS MATERIALS LAWS. ALL ENGINES AND OR EQUIPMENT MUST BE SHIPPED WITHOUT OIL AND OR ANTI-FREEZE… JUST A REMINDER TO FILL UNIT WITH OIL AND ANTI-FREEZE PRIOR TO STARTING AND TAKE ALL START UP PRECAUTIONS. ALL SALES ARE FINAL: SALES TAX AND ALL OTHER TAXES ARE THE RESPONSIBILITY OF THE BUYER. WARRANTY-NONE. THIS EQUIPMENT IS SOLD AS IS WITHOUT WARRANTY, EXPRESSED OF IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY/FITNESS FOR A PARTICULAR PURPOSE. SELLER IS NOT RESPONSIBLE FOR ANY/ALL DAMAGES/LOSSES ... moreOF ANY TYPE. BY BIDDING ON THIS ITEM, YOU ACKNOWLEDGE ALL QUESTIONS YOU HAVE ON THIS UNIT HAVE BEEN ANSWERED AND THE UNIT FITS YOUR NEEDS. WHAT YOU SEE IS WHAT YOU GET IN ALL PHOTOS UNLESS OTHERWISE NOTED. ANY ADDITIONAL QUESTIONS OTHER THAN WHAT IS STATED IN REGARDS TO THE LISTING MUST BE COMMUNICATED BY EMAIL. EQUIPMENT IS DESCRIBED TO THE BEST OF OUR ABILITY AND OPINIONS MAY VARY…MODEL, SERIAL# CPL’S OR ANY OTHER INFORMATION IS INCLUDED FOR CUSTOMER VERIFICATION. INSTALLATIONS/TERMS: WE SUGGEST ALL GENERATOR WIRING AND HOOKUPS BE DONE BY QUALIFIED ELECTRICIANS/GENERATOR PEOPLE. DUE TO THE DIFFERENT ELECTRICAL REQUIREMENTS/SITUATIONS OF BUYERS. WE DO NOT CONSULT ON GENERATOR INSTALLATION OR WIRING. UNITS NOT HOOKED UP CORRECTLY CAN CAUSE SERIOUS DAMAGE TO THE EQUIPMENT AND/OR BODILY INJURY TO THE INSTALLING PERSON AND IS AT BOTH THE DISCRETION AND RESPONSIBILITY OF THE BUYER. ALL INSTALLATIONS, START UPS, WIRING, MODIFICATIONS MADE, ETC. ON ALL EQUIPMENT ARE THE SOLE RESPONSIBILITY OF THE BUYER. SHIPPING QUOTES: ALL SHIPPING QUOTES. UNLESS SPECIFIED OTHERWISE, ARE A DOCK TO DOCK RATE(NON-RESIDENTIAL) AND A ONE TIME RATE. THIS MEANS THE BUYER MUST HAVE THE ABILITY
|
|
|
WACKER PT6 WATER PUMP 6" DEUTZ DIESEL ENGINE F2L912 SKID MOUNTED DIAPHRAGM PUMP
WACKER PT6 6" TRASH/WATER PUMP DIAPHRAGM SKID MOUNTED DEUTZ DIESEL ENGINE MODEL: F2L912 HP: 26 PLEASE GIVE US A CALL AT(540)921-2999 MON-FRI BETWEEN THE HOURS OF 8AM- 5PM EST OR GIVE AARON A CALL AT(540)599-0592 WITH ANY QUESTIONS THAT YOU MAY HAVE OR IF YOU NEED A SHIPPING QUOTE. DUE TO PREVIOUS ISSUES WITH NON-PAYING BIDDERS. WE REQUIRE A $500 DEPOSIT WITHIN 24 HOURS. PLEASE CALL IF YOU HAVE ANY ISSUES WHEN MAKING YOUR DEPOSIT. FULL PAYMENT FOR THE ITEM IS DUE WITHIN 7 DAYS. IF YOU HAVE QUESTIONS ABOUT THIS ITEM, PLEASE CONTACT US BEFORE BIDDING OR BUYING.
|
|
|
Gorman Rupp Pump Station Skid Mounted with 2 T3A3-B Pumps,Control Panel, Motors
Please view all pictures and ask any questions you may have. Before deciding to purchase. Local viewing can be arranged. I reserve the right to withdraw this offer at anytime as this unit is for sale locally. Buyer is responsible for all shipping costs. Local pickup on this item is available as well. Payment shall be as follows, $500 deposit by Paypal and the remainder in cash upon pickup, or payment by wire transfer. Payment must be cleared before the pump station can be obtained. Thank you for viewing this offer.
|
|
|
GODWIN DPC300 12 INCH PUMP SKID MOUNTED SELF PRIMING JOHN DEERE DIESEL BOB CAT
GODWIN DPC300 SERIAL 9057251 METER READS 7768 HOURS JOHN DEERE 6 CYL ENGINE BOTTOM MOUNTED FUEL TANK PUMP IS FOR SALE LOCALLY PLEASE CALL 1-304-279-9744 WITH ANY QUESTIONS The Godwin DPC300 automatic Dri-Prime 12" 300mm) centrifugal pump has gained recognition as the industry leader in high volume bypass pumping over the last fifteen years. With flows to 5.000 gallons per minute(315.5 l/sec. and solids handling to 3-1/2" 89mm) in diameter, the DPC300 moves large volumes of water while providing the ease of automatic priming to 28 feet(8.5M) The convenience of a low profile discharge flange makes pipe connections easy and efficient. When the job calls for high volume, the Godwin DPC300 is the benchmark by which all others are judged. Direct drive automatic priming 12" 300mm) high volume centrifugal pump with vacuum priming compressor ... moremounted to a diesel engine. Available in electric drive or as bare shaft pumpend. All cast iron construction with 4 vane cast iron impeller. Extensive application flexibility— will handle raw sewage. Sludges and liquids with solids up to 3-1/2" 89mm) in diameter. Continuously operated“Godwin” air ejector priming device requiring no form of periodic adjustment or control. Dry running. Oil lubricated, mechanical seal with abrasion resistant solid silicon carbide interfaces. Solids handling swing check Non Return valve at pump discharge. Skid base incorporating integral overnight running fuel tank. Simple maintenance— normally limited to checking engine oil. Compressor oil, and seal lubrication. Standard engine— John Deere 6068T. Available with a variety of engines including Cummins. Caterpillar and Deutz. Low profile side discharge for easy pipe connection. Balanced unit with centralized lifting bracket for easy handling. A variety of silenced units are available. Performance Table Diesel Set— John Deere 6068T. 151 hp(113kw) 2400 rpm, Skid Base Impeller Diameter— 17 inches(430 mm) Total Delivery Head- Feet, Total Suction 10, 20, 30, 40, 50, Head- Feet, O
|
|
|
CORNELL RH54-2 6" Discharge/Intake Skid Mounted Pump Diesel John Deere Engine
6” Intake& Discharge· Diesel. John Deere 2.4L Engine· Skid Mounted· RH Series· Integrated Fuel Tank. Multi-Phase Pump SHIPPING: Shipping and any associated fees are buyer’s responsibility. CPR Services’ standard business hours are M-F. 7AM-4PM CST. Easy truck access and loading dock if necessary. Preview and Pickup Location is 1260 W Main Ave. De Pere, WI 54115. Upon request. CPR will combine winning auctions to consolidate shipping. Check out my other items! Many more brands& types of equipment not listed! Please contact us for more information. Please confirm coordination of all shipments at least 24 hours prior to pickup. Item MUST BE PAID IN FULL within 5 days of auction close. Please do not hesitate to contact us at 920-336-4444 or click“Ask Seller a Question” with any questions or concerns. PAYMENT: Wisconsin ... moreSales Tax May Apply Depending on Pickup/Shipment Specifics. Please Inquire. Item(s) MUST BE PAID IN FULL within 5 business days of auction close. For this Item CPR prefers the following payment methods: Bank ACH Transfer Bank Wire Transfer Bank/Certified Cashiers Check But will accept: Credit Card Paypal Item sold"AS IS" WHERE IS" and"WITH ALL FAULTS" CPR SERVICES SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. Item is available for sale/ use locally, CPR reserves the right to end the auction at any time for any reason.
|
|
|
VOGELSANG MISSION MAG 433 PRESSURE PUMP SKID MOUNTED PUMP L DUETZ IRRIGATION
MISSION MAG 433 VOGELSANG METER READS 1591 HOURS CHECK OUT SPECS SUPER CLEAN DUETZ 6 CYL ENGINE 4X3X13 PUMP BOTTOM MOUNTED FUEL TANK PUMP IS FOR SALE LOCALLY PLEASE CALL 1-304-279-9744 WITH ANY QUESTIONS NOV's Mission Magnum has been the most popular centrifugal pump in the drilling industry since the 1970’s because of its proven reliability. Durability, and economical structure. The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome™, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors(horizontal, vertical, or close-coupled configuration) Also available. Horizontal ... moreand Vertical Close Coupled Magnum Typical Applications• Barite. Ferric oxide, and mineral oil• Base drilling muds• Glass fibers• Sugar processing• Ash or coal conveyers• Cement• Mine de-watering• Lime slurries• Kaolin clay• Crystalline forms. Versatile stuffing box• One piece casing• Casing gasket receded for protection• Back vanes reduce collection of solids at stuffing box• Long-life. No-adjustment mechanical seal available for near zero leakage• Replaceable shaft sleeve• Lip seals for maximum bearing protection(Labyrinth seals optional) Duplex angular contact bearings• Thicker. Stronger concentric casings• Full pipe diameter entrance for minimum turbulence and maximum efficiency• Single row roller bearings for increased bearing life• Easy accessible front access drain• Reduced high bearing loads. Sizes from 3x2x13 to 10x8x14• Flow rates from a few gallons per minute up to 2.600 GPM• Head pressure up to 550 feet• Best utilized for applications requiring up to 200 HP. Non-refundable down payments for all purchases must be received within 24 hours- Please call to make payment arrangements· We only accept down payments of up to $500 via P
|
|
|
GORMAN RUPP 11 INCH PUMP SKID MOUNTED IRRIGATION 177 HP DUETZ DIESEL BOB CAT
GORMAN RUPP 11 INCH PUMP OUTLET REDUCED FROM 8 TO 6 METER READS 2258 HOURS SUPER CLEAN DUETZ 6 CYL ENGINE 177 HP DIESEL ENGINE COMPARE THESE PUMPS AT OVER 25000 DOLLARS BOTTOM MOUNTED FUEL TANK PUMP IS FOR SALE LOCALLY PLEASE CALL 1-304-279-9744 WITH ANY QUESTIONS Non-refundable down payments for all purchases must be received within 24 hours- Please call to make payment arrangements· We only accept down payments of up to $500 via PayPal and accept Visa. Mastercard and Discover· We accept checks. Cashier checks and wire transfers for payment in full· All checks must clear the bank before buyers can pick up their purchase. Or you can have your item shipped· Wire transfers are the easiest and safest method of payment· Payment in full must be received within 3 days of close of auction or the or the purchased item will ... morebe relisted· All items must be paid in full before pickup can be scheduled SHIPPING: Shipping is the sole responsibility of the winning bidder– and all shipping charges will be assumed by the auction winner· We ship worldwide. Or you may pick up the item in person. We will assist with loading the item upon pickup at no charge to you o. We will provide fork lifts and docks for loading· Buyers can also choose their carrier of choice· Call us and we will provide a list of good carriers for you to contact· For shipping quotes contact Kris@ 1-877-569-5623 or Fees& Taxes: You are responsible to pay the taxes due in your home state if you title the machine. You will not be charged sales tax on any item if you are from out of state. If you are a Md resident you will be subject to 6% sales tax on the purchase price of your Item. Warranty: All items sold"as is where is" no implied or written warranty, We encourage you or a third party to come and do a full inspection, We do not offer partial refunds, Returns: All items must be returned in 14 days in same condition, Must run and operate as it did when shipped to you, All shipping outbound and return
|
|
|
Polymer Pump System (3 skid mounted pumps 124583 SEEPEX pumps w/ motors)
Selling a Skid mounted Polymer Pump System Compressor is used in good condition. It is available to view at our yard. If you have any further questions. Please contact me. Specifics: 3 polymer pumps on a skid- SEEPEX model 124583- Size.025- 12 pressure stage. 3 Polymer Pump Motors- Nord model NM33711502/0024- 3 phase- 230/460 V- 60 HZ. 2 Electrical HOA Switches/Boxes. Buyer to pay freight.
|
|
|
GM Diesel Power Skid Mounted Pump GM Diesel Engine w PEERLESS 1000 GPM PUMP
Y OU ARE PURCHASING(1) USED GM DIESEL POWER PUMP SKID SPECIFICATIONS: AS-IS MAY NEED REPAIR AND/OR MAINTENANCE MANUFACTURER: GM DIESEL POWER MODEL: PTA-1SD-50 S/N 286253 MOTOR: DETROIT DIESEL- MODEL: 4061-A PUMP: PEERLESS PUMP- MODEL: 5 AF 10 S/N 320512 GPM: 1000 FT:231 RPM: 1760 TOTAL APPROX. WEIGHT: 1500 lbs. Please CALL(860)662-1495 OR(860) 798-1514. For additional Item information or for a Shipping Quote Request. Thank-you for your interest and for looking at this item. This ITEM is being sold as is. Where is with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations ... moreare for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the ITEM and to have satisfied himself or herself, as to the condition and value; to bid based upon that judgment solely. Please view our Payment Options. In this listing. We accept PAY PAL. Major credit cards(Visa and MasterCard) electronic checks as forms of payment. Payment required with(3) days of Auction End or Buy-It-Now Listings. Buyer is responsible for pickup or shipping of this ITEM. PLEASE CONFIRM AUTOMATED SHIPPING ESTIMATE. BEFORE PLACING A BID. If you wish to have it shipped using our FREIGHT service. We will gladly cooperate. PLEASE CONTACT US for a confirmed shipping cost. Calculated; using the Buyers’ City and zip code. When requesting a FREIGHT quote, PLEASE INCLUDE the following information: 1) Address. City and Zip Code(2) Commercial or Residential address(3) Fork-truck or Lift Gate Service required. Additional Fees May Apply; for Packaging and Handling. Please Inquire- If not specified in listing. If you are not sure about something. Please ask! Do not assume anything not liste
|
|
 |