|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: China 1 x DDCSV1.1 System. USB interface, support for common U disk system. Online reading technology, supports large-capacity U disk, support for large G-code ... morefile, any size file can be read in seconds. 1 x U Disk.
Buy It Now
$4.98 Shipping Condition: New Location: China BASIC SPECS Model No. DM432C Motor Phase: 2. 4 Matched Motor: NEMA 14- 23 Supply Voltage: 20- 40 VDC Output Current: 0.3- 3.2 A Logic Signal Current: ... more7- 16 mA Pulse Input Frequency: 0- 200 kHz Microstep Resolutions: 1- 512 Isolation Resistance: 500 MΩ Control Signal: Step& Dir Dimension: 116×69.2×26.5 mm Weight: 190 gram(6.8 oz) INTRODUCTION DM432C is a versatility fully digital stepping driver based on a DSP with advanced control algorithm. The DM432C is the next generation of digital stepping motor controls. It brings a unique level of system smoothness. Providing optimum torque and nulls mid-range instability. Motor auto-identification and parameter auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers in the markets. Its unique features make the DM432C an ideal solution for applications that require low-speed smoothness. DM432C is suitable for a wide range of stepping motors. From NEMA size 14 to 23. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the DM432C an ideal solution for applications that require low-speed smoothness. KEY FEATURES• Anti-Resonance. Provides optimum torque and nulls mid-range instability• Motor self-test and parameter auto-configuration technology, offers optimum responses with different motors• Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance• Microstep resolutions programmable. From 200 steps/rev to 102,400 steps/rev• Supply voltage up to +40 VDC• Output current programmable. From 0.3A to 3.2A• Pulse input frequency up to 200 KHz• TTL compatible and optically isolated input• Automatic idle-current reduction• Suitable for 2-phase and 4-phase motors• Support PUL/DIR and CW/CCW modes• Over-voltage. Over-current, phase-error protection
Buy It Now
Free Shipping Condition: New Location: 宝安区, China LEADSHINE ND1182/DM1182 2/4 PHASE DIGITAL STEPPER MOTOR DRIVER STEPPING DRIVER. Feature: nbsp  The DM1182 is a high voltage. Versatility fully ... moredigital stepping driver based on a DSP with advanced control algorithm. The DM1182 is the next generation of digital stepping motor controls. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor auto-identification and parameter auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers in the markets. Its unique features make the DM1182 an ideal solution for applications that require low-speed smoothness.nbsp  Anti-Resonance. Provides optimum torque and nulls mid-range instability. Motor auto-identification and parameter auto-configuration technology. Offers optimum responses with different motors. Multi-Stepping allows a low resolution step input to produce a higher microsite output for smooth system performance. Microstep resolutions programmable. From full-step to 102,400 steps/rev. Soft-start during initial power-up. Supply voltage up to +150 VAC. Output current programmable. From 0.5A to 8.2A. Pulse input frequency up to 200 KHz. TTL compatible and optically isolated input. Automatic idle-current reduction(Reduction rate can be software configured) Suitable for 2-phase and 4-phase motors. Support PUL/DIR and CW/CCW modes. Over-voltage. Under-voltage, over-current, phase-error protections. Specification: eaeeonb sijpidk eajiieg MPI Buyer should pay within 7 days after purchase. We only accept payment via PayPal. Our team focuses on providing high quality products with reasonable price and tries its best to keep transactions as simple as possible. Please be confident of and enjoy your shopping here! Please feel free to contact us via eBay message system or email.
Buy It Now
$4.98 Shipping Condition: New Location: China Leadshine 2phase drive 30-90DCV 8.2A HBS86H+86HS40-EC-1000 stepper motor Applications: The HBS series offers an alternative for applications requiring ... morehigh performance and high reliability when the servo was the only choice. While it remains cost-effective. Its great feature of fast response and no hunting make it ideal for applications such as bonding and vision systems in which rapid motions with a short distance are required and hunting would be a problem. And it is ideal for applications where the equipment uses a belt-drive mechanism or otherwise has low rigidity and you don't want it to vibrate when stopping. HBS86H: The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice. While it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and an internal encoder which is used to close the position, velocity and current loops in real time, just like servo systems. It combines the best of servo and stepper motor technologies, and delivers unique capabilities and enhancements over both, while at a fraction of the cost of a servo system. HBS86H 2-phase Hybrid Servo Drive 20-70VAC or 30-90VDC. 8.2A Peak No Tuning. Nulls loss of Synchronization Closed-loop. Eliminates loss of synchronization Broader operating range– higher torque and higher speed Reduced motor heating and more efficient Smooth motion and super-low motor noise Do not need a high torque margin No Tuning and always stable Fast response. No delay and almost no settle time High torque at starting and low speed. High stiffness at standstill Lower cost Electrical Specifications: Parameter Min Typical Max Unit Input Voltage 20 36 50 VDC Output Current 0- 8.0(Peak) A Pulse Input Frequency 0- 200 kHz Logic Signal Current 7 10 16 mA Isolation Resistance 500- MΩ Operating Environment Cooling Natural Cooling or Forced cooling Operating Environment Environment Avoid dust. Oil fog and corrosive gases Storage Te
Buy It Now
$26.90 Shipping Condition: New Location: China USB interface, support common U disk system. 19: Online reading technology, support large-capacity U disk, support super-large G-code files, files of ... moreany size, can be read in seconds. 15: High-speed output interface chip, providing sufficient current and pulse frequency signal output.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Product line :Micrologix. Date : 2022. CNC Machine Parts. Stepper Motor Drive System. Servo Motor Drive System. Variable Frequency Drive. 120/240V AC ... morePower. Part number : 1766-L32BWA.
Buy It Now
Free Shipping Condition: New Location: China (L298N internal transistor switch, low efficiency, high fever, need to add heat sink, bulky, L298N very easy to burn). Motor drive module is ideal for ... moreuse in battery-powered smart car, toy cars, robots.
Buy It Now
Free Shipping Condition: New Location: China Applicable modules: A4988, DRV8825. This product is only an expansion board, does not include 4988/8825 driver module. Interface: direction, enable, speed. ... moreMKS OSC Stepper Motor Pulse Signal Generator Module For Driver Speed Regulator.
Buy It Now
Free Shipping Condition: New Location: China , 6 input points and 3 output points.
Buy It Now
Free Shipping Condition: New Location: 宝安区, China Pulse input frequency up to 200 KHz. Rotor inertia. Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth ... moresystem performance. Phase Inductance. Phase resistance.
Buy It Now
$2.00 Shipping Condition: New Location: China Setting both inputs low will enter a low-power sleep mode. This novel solution uses standard low-cost, low-power resistors to set the current threshold. ... moreH-bridge motor driver: drives a DC motor, the windings of a stepper motor or other loads.
Buy It Now
Free Shipping Condition: New Location: 宝安区, China This DMA882S is to replace AM882H and AM882. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. ... moreIts unique features make the AM882 an ideal solution for applications that require low-speed smoothness.
Buy It Now
$11.89 Shipping Condition: New Location: China Model: DMA860H. Type: Driver.
Buy It Now
Free Shipping Condition: New Location: China Motor Drive Module DC Motor Driver 60A Dual Super Power H-bridge 60KHZ Switching Frequency Motor Driver for Robot Competition. When driving the motor, ... morethe maximum rated current of the module can reach 60A, and the on-resistance is only 0.003 ohms.
Buy It Now
$20.50 Shipping Condition: New Location: China USB interface, support for common U disk system. Independent design system software. Integrated power stabilization system can fight the general spindle ... moremotor electromagnetic interference. It supports the standard G code system.
Buy It Now
$11.89 Shipping Condition: New Location: China Leadshine 2phase drive 30-90DCV 8.2A HBS86H+86HS40-EC-1000 stepper motor Applications: The HBS series offers an alternative for applications requiring ... morehigh performance and high reliability when the servo was the only choice. While it remains cost-effective. Its great feature of fast response and no hunting make it ideal for applications such as bonding and vision systems in which rapid motions with a short distance are required and hunting would be a problem. And it is ideal for applications where the equipment uses a belt-drive mechanism or otherwise has low rigidity and you don't want it to vibrate when stopping. HBS86H: The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice. While it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and an internal encoder which is used to close the position, velocity and current loops in real time, just like servo systems. It combines the best of servo and stepper motor technologies, and delivers unique capabilities and enhancements over both, while at a fraction of the cost of a servo system. HBS86H 2-phase Hybrid Servo Drive 20-70VAC or 30-90VDC. 8.2A Peak No Tuning. Nulls loss of Synchronization Closed-loop. Eliminates loss of synchronization Broader operating range– higher torque and higher speed Reduced motor heating and more efficient Smooth motion and super-low motor noise Do not need a high torque margin No Tuning and always stable Fast response. No delay and almost no settle time High torque at starting and low speed. High stiffness at standstill Lower cost Electrical Specifications: Parameter Min Typical Max Unit Input Voltage 20 36 50 VDC Output Current 0- 8.0(Peak) A Pulse Input Frequency 0- 200 kHz Logic Signal Current 7 10 16 mA Isolation Resistance 500- MΩ Operating Environment Cooling Natural Cooling or Forced cooling Operating Environment Environment Avoid dust. Oil fog and corrosive gases Storage Te
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$11.89 Shipping Condition: New Location: China BASIC SPECS Model No. DM432C Motor Phase: 2. 4 Matched Motor: NEMA 14- 23 Supply Voltage: 20- 40 VDC Output Current: 0.3- 3.2 A Logic Signal Current: ... more7- 16 mA Pulse Input Frequency: 0- 200 kHz Microstep Resolutions: 1- 512 Isolation Resistance: 500 MΩ Control Signal: Step& Dir Dimension: 116×69.2×26.5 mm Weight: 190 gram(6.8 oz) INTRODUCTION DM432C is a versatility fully digital stepping driver based on a DSP with advanced control algorithm. The DM432C is the next generation of digital stepping motor controls. It brings a unique level of system smoothness. Providing optimum torque and nulls mid-range instability. Motor auto-identification and parameter auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers in the markets. Its unique features make the DM432C an ideal solution for applications that require low-speed smoothness. DM432C is suitable for a wide range of stepping motors. From NEMA size 14 to 23. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the DM432C an ideal solution for applications that require low-speed smoothness. KEY FEATURES• Anti-Resonance. Provides optimum torque and nulls mid-range instability• Motor self-test and parameter auto-configuration technology, offers optimum responses with different motors• Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance• Microstep resolutions programmable. From 200 steps/rev to 102,400 steps/rev• Supply voltage up to +40 VDC• Output current programmable. From 0.3A to 3.2A• Pulse input frequency up to 200 KHz• TTL compatible and optically isolated input• Automatic idle-current reduction• Suitable for 2-phase and 4-phase motors• Support PUL/DIR and CW/CCW modes• Over-voltage. Over-current, phase-error protection
Buy It Now
$2.00 Shipping Condition: New Location: China 5Pcs 5-12V Mini ULN2003 Five Line Four-phase Stepper Motor Driver Module Onboard ULN2003A Motor Drive Chip Stepper Motor Driver Board. 5P onboard pin ... moresocket, you can connect directly 28BYJ-48 models of stepper motor.
Buy It Now
Free Shipping Condition: New Location: China Model Number: 2DM860. Motor Type: Stepper Motor. 1 x Stepper Motor Driver. Users expect a small noise, high-speed device applications particularly good ... moreeffect. Pulse Frequency max :200K. Torque compensation in high speed.
Buy It Now
$11.89 Shipping Condition: New Location: China Model: DMA882S. Type: Driver.
Buy It Now
$4.98 Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Vibration Motor. Handheld Inkjet Printer. 3D Printer. Rosin Heat Press Machine. Jog function for each axis (continuous, step, defined distance). S ingle ... moreaxis Pulse. High-speed output interface chip that provides sufficient current and pulse frequency signal output.
Buy It Now
Free Shipping Condition: New Location: China Input power: 400W. Adaptive power: ≤600W With or without Hall DC brushless motor. DC12V to AC220V Inverter Sine Wave Inverter Circuit Board 100W Drive ... moreBoard 1. DC 8-24V Brushless Water Pump High Power 20W Brushless Centrifugal Impeller Pump.
Buy It Now
$11.89 Shipping Condition: New Location: China Model: 3DM2283. Type: Drive.
Buy It Now
Free Shipping Condition: New Location: 宝安区, China Stepper Motor Driver DM856 Feature: The DM856 is a versatile fully digital stepping driver based on a DSP with advanced control algorithm. The DM856 is ... morethe next generation of digital stepping motor controls. It brings an unique level of system smoothness. Providing optimum torque and nulls mid-range instabilities. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and makes it easy to use. The driven motors can run with much smaller noise. Generate less heat, and move smoother than most other drivers on the market. Its unique features make the DM856 an ideal solution for applications that require low-speed smoothness. Compared to the DM432C. The DM856 provides a large voltage range and higher output current to able to drive a larger variety of stepper motors. Furthermore. The DSP of the DM856 is capable of driving the motors at higher speeds(above 3000 RPM) offering servo-like performance. The DM856 can be considered an improved version of the DM432C due do its broader supply voltage range. Anti-Resonance. Provides optimum torque and nulls mid-range instabilities Supply voltage up to +80VDC Output current programmable. From 0.5A to 5.6A Automatic idle-current reduction(in standstill mode) to reduce motor heating; function switchable Motor self-test and parameter auto-setup technology. Offers optimum responses with different motors Pulse input frequency up to 200 kHz TTL compatible and optically isolated input Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance Microstep resolutions programmable. From full-step to 102,400 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Over-voltage. Over-current, phase-error protections, Specification: Shipping: We will ship all items within 1- 3 working days upon receipt of payment.Our goal is: ship it as fast as we can. Standard Shipping: To USA.UK and Australia by ePacket,need 7-12 working days. Expedited/Standard Int'l Ship
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China 1 x DDCSV1.1 System. USB interface, support for common U disk system. Online reading technology, supports large-capacity U disk, support for large G-code ... morefile, any size file can be read in seconds. 1 x U Disk.
Buy It Now
$81.00 Shipping Condition: Used Location: Poland The repeatable accuracy of the drive is up to0.01mm ; range of motion40mm ; line load to10kg, transverse load to10kg ; maximum feed speed:50mm/s ; maximum ... morefeed force:400N. The set was removed from electronics production machines in cleanrooms.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Max 500Khz. USB interface, support commonU disk system. Jog function for each axis (continuous, step, defined distance). S ingle axis Pulse. Online reading ... moretechnology, support for large-capacity U disk, support for large G code files, files of any size can be read secondly.
Buy It Now
$3.99 Shipping Condition: New Location: China Maximum pulse output frequency: 50KHz (four axes can be 50KHZ simultaneously). External manual: multiple external manual functions can be defined for ... moreease of use. Free choice of input function: limited input can achieve a variety of user needs.
Buy It Now
$88.00 Shipping Condition: Used Location: United Arab Emirates SIQ POSITEC WDP3-314. Berger Lahr. 230.240V 2A POS/TEC Schneider Electric Berger Lahr is now Schneider Electric. Interface PC, RS 232, 230V 2A. Servo ... moreMotor Drive. Condition and Details.
Buy It Now
$81.00 Shipping Condition: Used Location: Poland The repeatable accuracy of the drive is up to0.01mm ; range of motion40mm ; line load to10kg, transverse load to10kg ; maximum feed speed:50mm/s ; maximum ... morefeed force:400N. We issue invoices. Important information!
Buy It Now
$6.00 Shipping Condition: New Location: China
Buy It Now
$10.00 Shipping Condition: New Location: China (7) Ethernet interface, support MACH3 software. 2) Support Motor: Servo motor, Stepper motor. 5) Can support 3-6 axis stepper systems,200KHz pulse output ... morefor every axis;. COM+ connect with the SP+ and DIR+.
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
Free Shipping Condition: New Location: China Maybe you also interested it: CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board From Hong Kong. Stepper Motor Drive Controller ... moreBoard Module L298N Dual H Bridge DC For Arduino From Hong Kong. Stepper Motor Drive Module L298N Dual H Bridge DC +28BYJ-48 5V Stepper Motor DC From Hong Kong. Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC For Arduino From Hong Kong. ULN2003AN ULN2003 Stepper Motor Driver Board Module for Arduino AVR ARM SMD L9110S H-bridge Stepper Motor Dual DC motor Driver Controller Board for Arduino From Hong Kong. 28BYJ-48 Valve Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction For Arduino From Hong Kong. 5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase From Hong Kong. Motor Drive Shield Expansion Board L293D For Arduino Duemilanove Mega2560 UNO From Hong Kong. StepStick Stepper motor driver A4988 A4983 3D Printer driver module Reprap Prus From Hong Kong. Item Description: Stepper motor driver board with ULN2003. For 12V 5V Stepper motor A. B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface. When used directly pluggable. Drive Module Board Size:2.8cm x 2.8cm x 2cm Package: 1PCS X ULN2003 Stepper Motor Driver Board Module for Arduino We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback. So that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them! The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually. We ensure dispatch the item within 1-2 business days. However. You bought the item from opposite side of the earth, so it needs a little longer time to deliver. Please place order only if you agree with the shipping time and all the
Buy It Now
$5.00 Shipping Condition: New Location: China It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Its unique features make the DM856 an ideal solution ... morefor applications that require low-speed smoothness.
Buy It Now
$11.89 Shipping Condition: New Location: China Model: DM860H. Type: Drive.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China Stepper motors and drivers from ENGMATE. EMA232-7630S4 Nema23 Stepper Motor. • Suitable for 2-phase and 4-phase Hybrid stepper motors. Hybrid Stepper ... moreMotor(EMA232-7630S4). ™ 5 Axis Kit for CNC DIY. 5 Axis Breakout Board.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$11.89 Shipping Condition: New Location: China Model: DMA860H. Type: Driver.
Buy It Now
$11.89 Shipping Condition: New Location: China BASIC SPECS Model No. DM432C Motor Phase: 2. 4 Matched Motor: NEMA 14- 23 Supply Voltage: 20- 40 VDC Output Current: 0.3- 3.2 A Logic Signal Current: ... more7- 16 mA Pulse Input Frequency: 0- 200 kHz Microstep Resolutions: 1- 512 Isolation Resistance: 500 MΩ Control Signal: Step& Dir Dimension: 116×69.2×26.5 mm Weight: 190 gram(6.8 oz) INTRODUCTION DM432C is a versatility fully digital stepping driver based on a DSP with advanced control algorithm. The DM432C is the next generation of digital stepping motor controls. It brings a unique level of system smoothness. Providing optimum torque and nulls mid-range instability. Motor auto-identification and parameter auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers in the markets. Its unique features make the DM432C an ideal solution for applications that require low-speed smoothness. DM432C is suitable for a wide range of stepping motors. From NEMA size 14 to 23. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the DM432C an ideal solution for applications that require low-speed smoothness. KEY FEATURES• Anti-Resonance. Provides optimum torque and nulls mid-range instability• Motor self-test and parameter auto-configuration technology, offers optimum responses with different motors• Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance• Microstep resolutions programmable. From 200 steps/rev to 102,400 steps/rev• Supply voltage up to +40 VDC• Output current programmable. From 0.3A to 3.2A• Pulse input frequency up to 200 KHz• TTL compatible and optically isolated input• Automatic idle-current reduction• Suitable for 2-phase and 4-phase motors• Support PUL/DIR and CW/CCW modes• Over-voltage. Over-current, phase-error protection
Buy It Now
Free Shipping Condition: New Location: China Generally, the motor with Hall has 8 wires (applicable), and the motor without hall has only 3 wires. Note: The drive module is bare board, and it is ... morenot necessary to force heat dissipation to drive the motor with power below 100W, as long as normal ventilation is ensured.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China This function is widely applied in RBI machine, Conveyor etc. EMA232-11235S4 Nema23 Stepper Motor. Stepper motors and drivers from ENGMATE. ™ 4 Axis Kit ... morefor CNC DIY. 5 Axis Professional Breakout Board.
Buy It Now
$20.50 Shipping Condition: New Location: China USB interface, support for common U disk system. Independent design system software. Integrated power stabilization system can fight the general spindle ... moremotor electromagnetic interference. It supports the standard G code system.
Buy It Now
$26.90 Shipping Condition: New Location: China USB interface, support common U disk system. 19: Online reading technology, support large-capacity U disk, support super-large G-code files, files of ... moreany size, can be read in seconds. 15: High-speed output interface chip, providing sufficient current and pulse frequency signal output.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China 1 5 Axis Professional Breakout Board + 3 EMA2-080A72 Microstep Motor Drivers. 5 Axis Professional Breakout Board. • Compatible with all the 2 phase, 3 ... morephase and 4 phase microstep drivers in the market.
|
|
|
 |