|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$5.81 Shipping Condition: Used Location: Houston, United States Older Gecko 320x's. They are rev6. They have never been used. A friend bought them& could not get them to work so he went back to the 320's. ... moreI was rebuilding his controls& he wanted me to try them. With the help of Mr. Gecko. I was able to get the one on the right to work with the servo that had a US Digital encoder. But not even Mr Gecko could get them to work with the Heds encoders. I sent them in for evaluation which cost me $45 with shipping to be told there was no problem found. So if you need 3 servo drives& you don't have Heds encoders these will do the trick. If you have Heds encoders don't bother. These will not work even with the mod to the Heds that is supposed to make them work.
Buy It Now
Free Shipping Condition: New – Open box Location: Houston, United States Optoisolated STEP, DIRECTION and DISABLE inputs. 350 kHz maximum Step pulse frequency. Recirculate mode while motor is stopped. 7A 80VDC 10-Microstep ... moreDrive. 20 kHz switching frequency. Defective Item.
Buy It Now
$6.00 Shipping Condition: New Location: East Syracuse, United States Geckodrive G250x Stepper Drive. New, old stock.
Buy It Now
$16.00 Shipping Condition: New Location: Sacramento, United States The G320X is the newest servo drive from Geckodrive, Inc. PID trimpots with settable integral coefficient. IN-POSITION, WARN, FAULT and POWER indicator ... moreLEDs. Short circuit protection. Built in step pulse multiplier.
Buy It Now
$10.50 Shipping Condition: New Location: Hoffman Estates, United States Project Artois Crejz Project Artois Crejz The G320X is the newest servo drive from Geckodrive. Inc. Built around the same high speed CPLD as the G203V ... moreand offering the same bulletproof protection, the G320X is a drive that will last. It was designed as a drop-in replacement for the G320 and is 100% backwards compatible with the G320 and G340. See more at: http:www.automationtechnologiesinc.com/products-page/dc-servo-motor-driver/geckodrive-servo-motor-driver-g320x#sthash.kczmXvo5.dpuf. Brand New G320X SERVO Driver. 1pcs The G320X is the newest servo drive from Geckodrive. Inc. Built around the same high speed CPLD as the G203V and offering the same bulletproof protection, the G320X is a drive that will last. It was designed as a drop-in replacement for the G320 and is 100% backwards compatible with the G320 and G340. The G320X has many new features based on user requests and industrial requirements that take full advantage of the CPLD architecture. Built in step pulse multiplier Stall torque time limit Four settable following error limits Encoder fail detect Short circuit protection Dynamic motor braking during fault condition STEP and DIRECTION COMMON can be either +5VDC or GND PID trimpots with settable integral coefficient IN-POSITION. WARN, FAULT and POWER indicator LEDs STEP and DIRECTION is +3.3VDC and +5VDC compatible at 6mA 20A 80VDC continuous operating maximum PID loop closed internally Quadrature encoder inputs of 4V(Logic 1) +5VDC 50mA onboard encoder supply Opto-isolated STEP and DIRECTION inputs 20kHz PWM frequency Settable current limit from 0A to 20A The G320X is the newest servo drive from Geckodrive. Inc. Built around the same high speed CPLD as the G203V and offering the same bulletproof protection, the G320X is a drive that will last. It was designed as a drop-in replacement for the G320 and is 100% backwards compatible with the G320 and G340. The G320X has many new features based on user requests and industrial requirements that take full advantage of the CPLD architecture. Specificatio
Buy It Now
$9.95 Shipping Condition: New Location: Wheelersburg, United States Warranty direct from Gecko Drive. 0 to 3.5A rated phase current. FAULT indicator LED,signal to PC. POWER indicator LED. This is longest warranty on any ... moreCNC driver in the country. Panel mount (5.7” by2.4” hole dim.).
Buy It Now
$20.00 Shipping Condition: New Location: Sacramento, United States Morphs to full step at higher speeds to maximize motor torque. Optoisolated STEP, DIRECTION, AND DISABLE inputs. 350 kHz maximum step pulse frequency. ... moreRecirculate mode while motor is stopped. Drive Specks.
Buy It Now
Free Shipping Condition: Used Location: Tucson, United States This lot includes four Geckodrive g201 stepper motor drives with modular main connectors. With this lot, you'll have everything you need for your project.
Buy It Now
$5.00 Shipping Condition: Used Location: Waltham, United States
Buy It Now
$20.00 Shipping Condition: New Location: Sacramento, United States Designed from the ground up to eliminate resonance from stepper motors, the GR214V is in a class above competing products. The GR214V is here! The GR214V ... morecan drive stepper motors ranging from NEMA 8 all the way up to NEMA 42.
Buy It Now
$12.50 Shipping Condition: New Location: Hoffman Estates, United States Project Artois Crejz Project Artois Crejz The G320X is the newest servo drive from Geckodrive. Inc. Built around the same high speed CPLD as the G203V ... moreand offering the same bulletproof protection, the G320X is a drive that will last. It was designed as a drop-in replacement for the G320 and is 100% backwards compatible with the G320 and G340. See more at: http:www.automationtechnologiesinc.com/products-page/dc-servo-motor-driver/geckodrive-servo-motor-driver-g320x#sthash.kczmXvo5.dpuf. 3pcs Brand New G320X SERVO Driver s The G320X is the newest servo drive from Geckodrive. Inc. Built around the same high speed CPLD as the G203V and offering the same bulletproof protection, the G320X is a drive that will last. It was designed as a drop-in replacement for the G320 and is 100% backwards compatible with the G320 and G340. The G320X has many new features based on user requests and industrial requirements that take full advantage of the CPLD architecture. Built in step pulse multiplier Stall torque time limit Four settable following error limits Encoder fail detect Short circuit protection Dynamic motor braking during fault condition STEP and DIRECTION COMMON can be either +5VDC or GND PID trimpots with settable integral coefficient IN-POSITION. WARN, FAULT and POWER indicator LEDs STEP and DIRECTION is +3.3VDC and +5VDC compatible at 6mA 20A 80VDC continuous operating maximum PID loop closed internally Quadrature encoder inputs of 4V(Logic 1) +5VDC 50mA onboard encoder supply Opto-isolated STEP and DIRECTION inputs 20kHz PWM frequency Settable current limit from 0A to 20A The G320X is the newest servo drive from Geckodrive. Inc. Built around the same high speed CPLD as the G203V and offering the same bulletproof protection, the G320X is a drive that will last. It was designed as a drop-in replacement for the G320 and is 100% backwards compatible with the G320 and G340. The G320X has many new features based on user requests and industrial requirements that take full advantage of the CPLD architecture. Specificati
Buy It Now
$20.00 Shipping Condition: New Location: Sacramento, United States It is built around our already proven CPLD design similar to the G203V and the G320X. The G210X adds many new features and is an excellent successor to ... morethe original G210. Power-on RESET. Full step, half step, 5 microstep or 10 microstep selectable resolution.
Buy It Now
Free Shipping Condition: Used Location: Toledo, United States This is a nice used GeckoDrive G201 10 uSTEP Drive.Pulled from working environment.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States CNC Breakout Communication Cable. This DB25 Male parallel port cable is. These are the only cables of this kind on the market that provides the end user ... morethe fastest to breakout all communication signals from the industry standard DB25 Male paralllel port cable.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Gecko G540 Overview Part 1 Users Manual Breakdown - YouTube. How To Change A Fuse, Or A Drive In A Gecko Drive G540 - YouTube. Gecko does an excellent ... morejob providing the longest warranty in the industry, but servicing a drive can be in excess of two weeks at timse depending on how busy they are.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This kit features 3 of Gecko Drives G251x micro stepping drives that include. These cables are wired straight through for a simple universal " Plug N ... morePlay " solution to be used with your G251x drives that utilize a 4 lead connections ( This is also known as Bipolar ).
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Paste link into a browser window:[isdntekvideo].
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Model # : G201. Stepper Motor Drive. Current Output: 1-7A. If you do not have an account No Worries! SKU# SB-179262.
Buy It Now
$10.95 Shipping Condition: New Location: Spring Hill, United States Gecko G540 Overview Part 1 Users Manual Breakdown - YouTube. How To Change A Fuse, Or A Drive In A Gecko Drive G540 - YouTube. Here's an overview on the ... moredrive covered from Marcus application engineer at Gecko Drive.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Gecko G540 Overview Part 1 Users Manual Breakdown - YouTube. Here's my two overview videos covering the G540 driver. The drives specs are listed under ... morethe videos. How To Change A Fuse, Or A Drive In A Gecko Drive G540 - YouTube.
Buy It Now
$10.95 Shipping Condition: New Location: Spring Hill, United States Gecko G540 Overview Part 1 Users Manual Breakdown - YouTube. How To Change A Fuse, Or A Drive In A Gecko Drive G540 - YouTube. Here's an overview on the ... moredrive covered from Marcus application engineer at Gecko Drive.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Gecko G540 Overview Part 1 Users Manual Breakdown - YouTube. Here's my two overview videos covering the G540 driver. The drives specs are listed under ... morethe videos. How To Change A Fuse, Or A Drive In A Gecko Drive G540 - YouTube.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States They were designed in house to be used with these drives for optimal performance. Gecko's 3 year direct support US warranty. VAMPIRE Pro Grade Digital ... moreStepper drivers (These are the latest REV 7 2019 edition), and custom made aluminum heatsink.
Buy It Now
$22.85 Shipping Condition: New Location: Spring Hill, United States This system is built around the Gecko Drive G540 digital integrated micro stepping 4 axes driver system. I also include the matching resistors for the ... moreG540. Gecko G540 20AWG 13ft. Pro Shielded Motor Cables (Made With Signal Cable) - YouTube.
Buy It Now
Free Shipping Condition: New Location: Houston, United States An attached hard anodized heatspreader electrically isolates the MOSFETs on the bottom side and makes it possible to attach the G251X to any heatsinking ... moresurface. Defective Item.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This system is built around the Gecko Drive G540 digital integrated micro stepping 4 axes driver system. I also include the required resistors for the ... moreG540. Gecko G251x Driver Myths.16ft Table Run With Gecko G540 Drivers.
Buy It Now
$3.99 Shipping Condition: New Location: Sacramento, United States
Buy It Now
$20.00 Shipping Condition: New Location: Sacramento, United States The G213V is Geckodrive's toughest drive with a step pulse multiplier, allowing it to run in full step, half step, 5 microstep and 10 microstep modes. ... morePower-on reset. Full step, half step 5 microstep and 10 microstep selectable resolution.
Buy It Now
$8.70 Shipping Condition: Used Location: Grand Rapids, United States Geckodrive GM215 Integrated Motion Controller Stepper Driver Step Motor Drive.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Below is a video of my 6 axis system featuring the G251x drives running a 16ft. Gecko G251x Driver Myths.16ft Table Run With Gecko G540 Drivers. - YouTube. ... moreGecko G251X Rev9 Drives Features First an most important Gecko's infamous US support.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Pro-Grade Solder Type Connectors (Retrofits, Gecko G201x,G203v,G214 Drives) - YouTube. These simply require drilling a 16mm hole to mount the panel mount ... moremale connector into your enclosure. You can add 15Ft.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This 6 axis kit features 6 Gecko G251x micro stepping drives that include. the industry leading 3 year US warranty, and full US based tech support. and ... moresix Nema 23 600oz motors. Resistors for these motors are also included for the G251x drives.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Gecko G540 Overview Part 1 Users Manual Breakdown - YouTube. Here's my two overview videos covering the G540 driver. The drives specs are listed under ... morethe videos. How To Change A Fuse, Or A Drive In A Gecko Drive G540 - YouTube.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Paste link into a browser window:[isdntekvideo].
Buy It Now
$25.85 Shipping Condition: New Location: Spring Hill, United States Simply attach the 3 wires already included, and labeled for super easy assembly. The system is built to support Gecko Drive's G540. This barebones system ... moreincludes everything, but the actual G540. Three Aavid aluminum heatsinks to be installed on the G540 by the end user.
Buy It Now
$10.40 Shipping Condition: Used Location: Long Beach, United States Excellent working condition... This model 320 is much smoother and quieter than the 320x... USA shipping only...
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This system is built around the Gecko Drive G540 digital integrated micro stepping 4 axes driver system. I also include the required resistors for the ... moreG540. Gecko Drive G540 REV8 (2021 Edition ) Integrated 4 axes digital micro stepping driver system (. ).
Buy It Now
$10.40 Shipping Condition: Used Location: Long Beach, United States Older Gecko 320x's. They are rev6. They have never been used. A friend bought them& could not get them to work so he went back to the 320's. ... moreI was rebuilding his controls& he wanted me to try them. With the help of Mr. Gecko. I was able to get the one on the right to work with the servo that had a US Digital encoder. But not even Mr Gecko could get them to work with the Heds encoders. I sent them in for evaluation which cost me $45 with shipping to be told there was no problem found. So if you need 3 servo drives& you don't have Heds encoders these will do the trick. If you have Heds encoders don't bother. These will not work even with the mod to the Heds that is supposed to make them work.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This 3 axis kit features 3 Gecko G251x micro stepping drives that include. the industry leading 3 year US warranty, and full US based tech support. and ... morethree Nema 23 600oz motors. Resistors for these motors are also included for the G251x drives.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States DUAL Gecko Drive G540 pre-machined. 14-GX-16 male panel mount ports machined into the rear panel to support all eight inputs, and four outputs the G540 ... morehas. Dual Gecko G540 Master Edition Enclosure (Massive Expandability).
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States 1 Gecko Drive G540 Integrated Digital 4 Axis Micro Stepping Driver System (REV8 2020 Edition ) with 4 DB9 male solder type motor connectors with matching ... morehoods, and hardware (3 year US warranty). Resistors for these motors are also included for the G540.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States 1 Gecko Drive G540 Integrated Digital 4 Axis Micro Stepping Driver System (REV8 2020 Edition ) with 4 DB9 male solder type motor connectors with matching ... morehoods, and hardware (3 year US warranty). Desktop Beast + G540 = Insane Speed & Accuracy!
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Self-Test: A push button is used on the GR214V to allow for quick in-the-field testing of the drive’s core functionality. If the onboard DIP switch is ... moreused to set phase current the user can adjust a trimpot for holding torque from 0% - 100% current in standby mode.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Resistors for these motors are also included for the G540. Gecko G540 20AWG 13ft. Pro Shielded Motor Cables (Made With Signal Cable) - YouTube. MythBusted ... moreStepper Motor Accuracy Less Than. 001in! Gecko G540 - YouTube.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States G540 Vampire Cooling System REV2. This is simply the correct way to cool your Gecko G540, or any of your Gecko Drives for that matter. The heatsinks increase ... morethe surface area of the G540 while the fan evacuates the heat from your enclosure, while the thermal switch is simply the ultimate failsafe.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Gecko G540 20AWG 13ft. Pro Shielded Motor Cables (Made With Signal Cable) - YouTube. MythBusted Stepper Motor Accuracy Less Than. 001in! Gecko G540 - ... moreYouTube. This kit also includes three of my 13ft.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This DIY kit includes two G540's however one of the included G540's will only have a single drive installed providing you a total of 5 axis of motion ... morewith 8 total inputs, and 2 outputs available. MythBusted Stepper Motor Accuracy Less Than. 001in!
Buy It Now
$40.85 Shipping Condition: New Location: Spring Hill, United States This system is built around the Gecko Drive G540 digital integrated micro stepping 4 axes driver system. I also include the matching resistors for the ... moreG540 . These motors are the largest torque Nema 23 motors available.
Buy It Now
$13.50 Shipping Condition: New Location: Hoffman Estates, United States Project Artois Crejz Project Artois Crejz The G320X is the newest servo drive from Geckodrive. Inc. Built around the same high speed CPLD as the G203V ... moreand offering the same bulletproof protection, the G320X is a drive that will last. It was designed as a drop-in replacement for the G320 and is 100% backwards compatible with the G320 and G340. See more at: http:www.automationtechnologiesinc.com/products-page/dc-servo-motor-driver/geckodrive-servo-motor-driver-g320x#sthash.kczmXvo5.dpuf. 4pcs Brand New G320X SERVO Driver s The G320X is the newest servo drive from Geckodrive. Inc. Built around the same high speed CPLD as the G203V and offering the same bulletproof protection, the G320X is a drive that will last. It was designed as a drop-in replacement for the G320 and is 100% backwards compatible with the G320 and G340. The G320X has many new features based on user requests and industrial requirements that take full advantage of the CPLD architecture. Built in step pulse multiplier Stall torque time limit Four settable following error limits Encoder fail detect Short circuit protection Dynamic motor braking during fault condition STEP and DIRECTION COMMON can be either +5VDC or GND PID trimpots with settable integral coefficient IN-POSITION. WARN, FAULT and POWER indicator LEDs STEP and DIRECTION is +3.3VDC and +5VDC compatible at 6mA 20A 80VDC continuous operating maximum PID loop closed internally Quadrature encoder inputs of 4V(Logic 1) +5VDC 50mA onboard encoder supply Opto-isolated STEP and DIRECTION inputs 20kHz PWM frequency Settable current limit from 0A to 20A The G320X is the newest servo drive from Geckodrive. Inc. Built around the same high speed CPLD as the G203V and offering the same bulletproof protection, the G320X is a drive that will last. It was designed as a drop-in replacement for the G320 and is 100% backwards compatible with the G320 and G340. The G320X has many new features based on user requests and industrial requirements that take full advantage of the CPLD architecture. Specificati
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This package is for the person wanting to hit the ground running. It features the Gecko G540 motion controller This controller is the new revision 8 model ... morewith 2013 QC date code. This package is the most complete available at his price featuring: 6 Omron Limit Switches(Click the picture to review the details) 1 miniature E-stop Switch(Click the picture to review the details) 3 Nema 23 300oz in 2.4mh inductance motors(Click the picture to review the details) 48v 12.5a S-600 220v power supply Click the picture to review the details) Included is sealed DB9 connectors 4 total for up to four motors. Add 3 solderless connectors for $20(Click the picture to review the details) Also included is a fully licensed copy of Artsoft's Mach3 CNC software(No 500 line G-code limit) from Artsoft. I purchase my software from an authorized distributor. All software is Genuine. And registered to you or your business after purchasing. I will require you to provide me your information to have the software registered to you, or your business. If your looking at this package you realize the value it has. Due to such high turnover on these. If they are on order they will ship within 3 days. There's a reason these don't last long with this package. Please check my other auctions. If you are going to purchase more than one item please message me to combine shipping. My prices are worth taking the time to message me about. USPS shipping is FREE Intenational shipping welcome with adjusted shipping price. Gecko G540 Specs Four 10-Microstep motor drives. 0 to 3.5A rated phase current. 18VDC to 50VDC supply voltage. Mid-band resonance compensation. Auto standby current(70% current) Short-circuit protected. Optoisolation on all LPT signal pins. Two 1A at 0 to 50VDC rated outputs. Four SPST to GND inputs(TTL) FAULT indicator LED.Signal to PC. POWER indicator LED. I-SET resistor on motor connector. TRIM adjust for motor smoothness. Panel mount(5.7” by2.4” hole dim. Anodized aluminum package. No heatsink needed below 40C ambient. E
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This enclosure features 6-GX-16 male panel mount ports machined into the rear panel to support all four inputs, and the two outputs the G540 has. The ... moreenclosure includes 5 3 pin GX-16 male panel mounts to be used for switches, and accessories, and a single GX-16 6 pin male panel mount to be used for your relay integration.
2d 15h 25m 29s 0 bids
$110.00 Now
$4.43 Shipping Condition: New – Open box Location: Erie, United States The following information about the PMDX-416 was taken from the PMDX website These inputs can support a general purpose MPG, spindle index for RPM sensing ... moreand single pulse per revolution lathe threading, or full multi-line encoder support for threading.
Buy It Now
$12.95 Shipping Condition: New Location: Hoffman Estates, United States G540 Resistor Kits. The G540 is a complete 4-axis system which plugs directly into your computer via the parallel port and to your motors through DB9 ... moreconnectors. It contains four of our G250 drives, our own breakout board and a hard anodized aluminum case.
Buy It Now
$9.00 Shipping Condition: Used Location: Glen Mills, United States
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Self-Test: A push button is used on the GR214V to allow for quick in-the-field testing of the drive’s core functionality. If the onboard DIP switch is ... moreused to set phase current the user can adjust a trimpot for holding torque from 0% - 100% current in standby mode.
Buy It Now
$25.85 Shipping Condition: New Location: Spring Hill, United States Simply attach the 3 wires already included, and labeled for super easy assembly. The system is built to support Gecko Drive's G540. This barebones system ... moreincludes everything, but the actual G540. G540 UC400 Ethernet Barebones System Is Here!
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This DIY kit includes two G540's however one of the included G540's will only have a single drive installed providing you a total of 5 axis of motion ... morewith 8 total inputs, and 2 outputs available. MythBusted Stepper Motor Accuracy Less Than. 001in!
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States You can mount all three drives by drilling two holes virtually anywhere you prefer in your enclosure. Thumbnuts get them out within seconds for servicing, ... moreor to get them out of the way till your ready for final mounting.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This is very large for a production robot. This inaccuracy difference could be virtually totally eliminated by using a longer scale which is up to the ... moreend users allowable machining tolerances based on their preferred products, and budget for buying a larger Accu-scale.
|
|
|
|
Geckodrive GEL201 uSTEP DRIVE PN:40213
Please Read Item Description& Our Terms and Conditions Below Before Bidding! Geckodrive GEL201 uSTEP DRIVE PN:40213 Tested Working Geckodrive GEL201 uSTEP DRIVE PN:40213 Rev: B Power Tested Other than what's displayed in the images accompanying this listing or mentioned in the description above. There are no manuals, instructions, additional parts or accessories. Please Be Sure To Sign Up For My Store News Letter To Receive Information On Great Deals And Special Promotions! Take A Moment And Visit Our Ebay Store USA Sales Only Since we deal in surplus our auctions do NOT fall into eBay's black and white idea of Used and Not Working item categories. Some items we can only partially test because we don't have all of the item parts or know how to fully test. But it does not mean they don't work. We list our auctions as well ... moreas we can, so please bid accordingly. CTR Surplus Listing Terms All items are SOLD AS-IS Unless otherwise stated in the auction. Some exceptions: Auctions stated Tested-Working and New(NOT New- Old Stock) will be refunded if the item(s) has a problem(as in- not working properly or at all) But the item must be returned at the Buyer's cost, and we must be contacted within 14 days of delivery. The item must be what we sold 100% serial numbers, model numbers, all included parts from the auction, size, shape, color, what was pictured/mentioned, etc. Also shipping from the auction is not refunded. All auctions must be paid for with in 10 Days of end of auction and all end of auction notifications will be sent to your registered Ebay email address. Shipping If you select a higher grade of shipping other than UPS Ground. Please e-mail me because eBay does not notify us of the change! We ONLY use UPS and we do not use UPS accounts! We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. It is the buyer's responsibility to contact us on combined shipping. Most items will be shipped UPS Ground and au
|
|
|
Geckodrive g210
Good used condition. Parted out from working equipment. it currently has a 36k ohm resistor designating it as 3amp. FREE SHIPPING. Search terms: 6210 stepper motor driver controller cnc Posted with eBay Mobile
|
|
|
GECKODRIVE G210 STEPPER DRIVE
Product Description: Item for sale is a GECKODRIVE G210 Stepper Drive. This item is used. However, has an overall good physical appearance with some surface scratches/scuffs. Comes with a 14 Day DOA Warranty! Auction Includes: This sales includes a GECKODRIVE G210 Stepper Drive Details: Dimensions(LxWxH) NA Weight: 0.25 lbs approximately Additional Features: NA Operates: NA Size: This item will ship via FedEx. USPS, or UPS only! Most larger/heavier packages will ship through FedEx or UPS ground. All lighter and smaller packages will ship through USPS! If you have a concern with your order PLEASE message us through eBay or call us at 713-680-9325. Returns: Please contact us within 7 days of receipt of merchandise if item arrives DOA. Item MUST be returned within 14 days of receiving it. Return shipping will be paid by the buyer! Returns are ... moreONLY accepted if an item advertised as working arrives in non-working order or if item is grossly misrepresented. Refunds for such items will be given as Money Back. AAC-5. DN.
|
|
|
Geckodrive: G202, microstep for Mill, router, plasma, CNC
GECKODRIVE! G202 Bid before it is gone! Used but fully functioning. Removed from working equipment. Specs from Manufacturer: Minimum Maximum Units Supply Voltage. 24. 80. VDC. Motor Current. 0. 7. A. Power Dissipation. 1. 13. W. Temperature. 0. 70. °C. Humidity. 0. 95. Motor Inductance. 1. 50. MH. Input Frequency. 0. 200. KHz. Step Pulse“0” Time. 2. US. Step Pulse“1” Time. 1. US. Direction Setup. Before step rising edge) 200. NS. Direction Setup. Hold after pulse rising edge) 200. NS. Signal Voltage. 4.5. 5. VDC. Weight. 4.2. Oz. Due to the nature of electronic equipment. I cannot guaruntee this will be used corectly-therefore sold as-is-no returns. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f55dfd2a3-0x104-
|
|
|
Geckodrive G251 Stepper Motor Driver Gecko Cnc Milling Lathe Mill Router Machine
Very gently used Gecko G251 Stepper Motor Driver. It is in great shape. Only used a handful of times. Includes the voltage set resister, as pictured! This drive is designed for larger stepper motors such as nema 23 and nema 34. Geckodrive makes the best stepper drivers out there and this is a high-quality step motor drive. Ships fast!
|
|
|
Geckodrive G-320 Servo Motor Driver Gecko
These are old but. They work perfectly. They are probably 10 years old or more so you really need to know what you are bidding on and hopefully you already have some of these and are just buying these for potential replacements. They are for controlling servos and that is about all I know about them other than they were working when I took them out of the control box they were in. There are 3 of them that are being auctioned as a set. Shipping is 15.00 flat rate and bidding starts at.99 cents.
|
|
|
GECKODRIVE G201 10 MICROSTEP DRIVE
This item is used. It is in working condition. Please see pictures to determine cosmetic condition. Accepted payment: PayPal Payment must be made within 5 days of auction's close. Items generally ship within 1 business day of clearance of payment. Buyer will be notified if there is any unforeseen delay. Please see our returns policy at the top of this listing. We participate in eBays returns program. Buyer is responsible for all customs duties. Fees, and taxes incurred during international shipment. An item stated as a"parts/repair item cannot be returned for replacement or refund. If you are purchasing multiple items. Email us to get the best shipping price possible. Powered by
|
|
|
Geckodrive G-201 Step Drive
Geckodrive G-201 step Drive Took out from new equipment It's in A stockroom
|
|
|
Geckodrive G-320 DC Servo Motor Drivers ( Lot of 3 )
Geckodrive G-320 DC Servo Motor Drivers( Lot of 3) Took out from new equipment It's in A stockroom
|
|
|
GECKODRIVE GEL201 USTEP DRIVE PN: 40213 REVISION: B
GECKODRIVE GEL201 USTEP DRIVE PN: 40213 REVISION: B Manufacturer: GeckoDrive GEL201 uStep Drive PN: 40213 Normal Wear What Is Pictured Is What You Will Receive Take A Moment And Visit Our Ebay Store Please Read Terms and Conditions USA Sales Only All auctions must be paid for with in 10 Days of end of auction. All items are SOLD AS-IS Unless otherwise stated in the auction. All end of auction notifications will be sent to your registered Ebay email address. We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. If for some reason an item has to be returned to CTR Surplus the Buyer will have to pay the return shipping. The original shipping charges are not refundable. All returns are subject to a 20 percent restocking fee. For any return you must email CTR Surplus ... morewith in 3 days of receipt of the item. Please ask all questions before placing a bid. Most items will be shipped UPS Ground and automatically insured for the bid amount. Any item that requires Truck Freight will require Buyers phone number and someone to unload the item from the truck(The Freight Company Will Not Unload The Truck) CTR Surplus 202 W. Livingston Ave Crestline Ohio 44827 Phone 419-683-3535 Fax 419-683-3230 All Auctions Will Be Automatically Insured For Final Bid Price Please click here to see my other auctions. 7.25% Sales Tax Will Be Charged On Item Price And Shipping On All Ohio Sales Powered by
|
|
|
Geckodrive G-320 CNC Servo Motor Driver Gecko
Used just to test a fourth axis. not used for more than a hour
|
|
|
4 Geckodrive G320 CNC Servo Motor Drivers Gecko PLUS Parallel port card
Here are four spare Geckodrive G320 drives. One is a G320X. These are 80V DC Servo Drives. All were sent back a few months ago to be repaired and verified functional by Geckodrive. I no longer need these drives as I am selling my CNC machine. These are straight back from Geckodrive. I have not used them since the return therefore are sold as-is with no returns. Also included in this sale is a Sound Logic parallel port breakout board which is brand new. Never installed. These are all my spares from my CNC retrofit project and all drives have had minimal use.
|
|
|
DynaCNC 4000 Controller ~ Ditco ~ Three GeckoDrive G201 ~ ATHC ~DL200
This is a DynaCNC Controller and DL200 that came off a 4x8 stepper table I bought back in 2007/2008. When DynaCNC shut down. I ended up replacing the unit with a controller from CandCNC. This was a hobby machine that I has only used lightly with the 4000 contoller. It was working when I removed it. These unit were made by Ditco. Inc. in Kent Washington. Please email with any questions. Thanks. Cape-estate. Powered by SixBit's eCommerce Solution
|
|
|
GeckoDrive G201 Micro Step / Stepper Drive ( CNC Mill Lathe Router Machine )
Description Up for sale is an unmarked GeckoDrive G201 microstep(stepper) drive in excellent used condition. The wire connectors have been upgraded to the newer design. I have included a reference image of the wiring connections for this drive. Further details are available at the GeckoDrive website. Please feel free to make an offer on these drives as I have 3 available. Condition This drive was removed from a functioning CNC machine. Includes(1) GeckoDrive G201 stepper drive with unmarked cover Specifications(from GeckoDrive website) Details The original G201 was Geckodrive's first step motor drive and is still a big seller. Having been refined over the last decade the G201 is a solid work horse for any industrial or hobby application. PHYSICAL AND ELECTRICAL RATINGS Minimum Maximum Units Supply Voltage 24 80 VDC Motor Current 0 7 A ... morePower Dissipation 1 13 W Temperature 0 70 °C Humidity 0 95% Motor Inductance 1 50 mH Input Frequency 0 200 kHz Step Pulse“0” Time 2 uS Step Pulse“1” Time 1 uS Direction Setup(Before step rising edge) 200 nS Direction Setup(Hold after pulse rising edge) 200 nS Signal Voltage 4.5 5 VDC Weight 3.6 oz
|
|
|
3 Geckodrive G-320x CNC Servo Motor Drivers Gecko Great Price Router Mill Plasma
Older Gecko 320x's. They are rev6. They have never been used. A friend bought them& could not get them to work so he went back to the 320's. I was rebuilding his controls& he wanted me to try them. With the help of Mr. Gecko. I was able to get the one on the right to work with the servo that had a US Digital encoder. But not even Mr Gecko could get them to work with the Heds encoders. I sent them in for evaluation which cost me $45 with shipping to be told there was no problem found. So if you need 3 servo drives& you don't have Heds encoders these will do the trick. If you have Heds encoders don't bother. These will not work even with the mod to the Heds that is supposed to make them work.
|
|
|
Geckodrive 201X Digital Stepper motor driver
Lot of 3 stepper motor drivers. Used. 100% functioning. They were mounted on the copper plate and actively cooled to ensure they never got hot. Copper plate not included. These have light hobby use on them. A few hours a week. Sometimes untouched for a month. Retail price for three would be $363.
|
|
|
gecko drive Geckodrive Lot Of 4 Used Working Geckodrives Cnc Mill Lathe G320
Gecko drive g320 servo drives. These came out of a working cnc mill. 3 are the same and one is a newer version that was added for a fourth axis. I will remove all wiring before they are boxed up. Ships to the lower 48 U.S. states only. Thank you. Posted with
|
|
 |