Scara Robot 6 Axis Robot Scara Robot Teach Pendant Controller 4 Axis Robot Fanuc Rj3 Abb Irc5 Mitsubishi Robot S4c+ M2000 Control Teach Pendant Abb Robot Dsqc S4c Controller Adept Technology Fanuc Robot Controller Robotics Arm Abb Irb Yaskawa Robot Motoman Robot Abb Robot Teach Pendant Abb Robotics Motoman Mrc Otc Daihen Eshed Robotec Axis Robot Arm Teach Pendant Cable Robot Power Supply Kuka Kr200 Series Abb Robot Arm Robo Cylinder Welding Robot Controller And Teach Pendant Teach Pendant Controller M96 Robot Board Dsqc Kawasaki Robot Abb Teach Pendant Kuka Robot Yaskawa Motoman Industrial Robot Controller M2000 Abb Irb Robot Yamaha Robot Pri Automation Robot Drive Wafer Transfer Robot Robotics Control Transfer Robot Irb Adept Robot Robot Power 6 Axis Servo Fanuc Teach Pendant Robotics Teach Pendant M2000 Robot Robotics Servo Staubli Abb 3Hne Fanuc Arcmate Fanuc Card Motoman Teach Pendant Abb Robot Controller Abb Irb1400 Assembly Robot Servo Robot Abb Robotics Dsqc Nachi Robot Arc Mate Fanuc Gmf Wafer Transfer Fanuc Robot Teach Pendant Wafer Handling Robot Robot Motor Daihen Robot Servo Drive Iii Robot Fanuc Arc Mate Robot Servo S4c S4c+ Robot System Brooks Automation 3 Axis Robot Wafer Robot Kuka Pa-4 Controller Fanuc Robot Arcmate Seiko D-Tran Scorbot Er Robot Interface Mrc Robot Irb1400 Robot Seiko Epson Automation Robot Robot Automation Fanuc Mate Robot Gripper Robot Controller Power Epson Robot Controller Tested Great Condition W Warranty Genmark Automation Fanuc Robotics Abb Arm Paint Robot Parallel Gripper Cartesian Robot Robot Teach Pendant M93 Robot Yaskawa Yasnac Robohand Kuka Kr150 Series Robot Wrist Servo Drive Unit Motoman Eshed Robotec Scorbot Irb 6400 Robot Operator Pendant W Cable Abb Irb 6400 Abb Serial Measurement Applied Robot Nachi Abb 6400 6 Axis Tool Changer Pneumatic Parallel Gripper Denso Robot Robot Base Robot Model Robot Controller Board Mitsubishi Movemaster Robot Arm 2 Robotics Axis Robotics Rj2 Rj3 Mitsubishi Movemaster Axis Robot Yasnac Mrc Robotics Power Six Axis 300Mm Wafer Air Gripper Main Cpu Abb Dsqc Adept Tech S4c+ M2000 Robot Controller Fanuc Ltd Abb Irb 6000 Robot Welder Welding Controller Xyz Robot Serial Measurement Board Robo Cylinder Loc Irb6000 Robot M98 M2000 M96 M97 M98 Robot Controller Cable S4c+ M2000 M2000a Rj3 Controller Wafer Handler Automation System Robot Robot Arm Irb Fanuc R-2000Ib 6 Axis Robot Arm Robot Control Adept Cobra Robot Kit Robot Track Pneumatic Robot Lr Mate Servo Positioning Controller Mrc Teach Fanuc Robot Fanuc R-30Ia Controller Diy Robot Duty Payload Robot Kuka Kr350 Series Emergency Stop Abb Fanuc Motoman Nachi Fanuc Robot Lr Mate Arm Irb 2400 M2000 W Controller Adept S4c+ M2000 M2000a Robot Robot Arm Main Computer Loadlock Robot Concept Ii Altus Brake Release Unit 3Hne 00313-1 S4 M94 M96 Fanuc Power Irb 6600 Robotic Welder Industrial Automation Stepper Motors Dsqc 346G Graco Robot Gri Robot Paint Line Rj Rj2 Dispensing Robot R-J3 Controller Robotics System Irb 2400 M2000 W Controller S4cplus
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
1500.00
Buy It Now
Condition: Used
Location: Plano, United States
Concepts Industrial FANUC ARC MATE 100I ROBOT W/ R-J3 CONTROLLER SYSTEM A05B-2402-B101(J) ITEM REMOVED FROM WORKING ENVIRONMENT. GUARANTEED NOT DOA. FOR ... moreFURTHER QUESTIONS CONTACT CHRIS AT 812-623-6100. THIS ITEM WILL SHIP FREIGHT ONLY. 825 lbs) PLEASE WAIT TO BE INVOICED FOR SHIPPING COST. BUYER PAYS ALL SHIPPING COSTS) Due to our large volume of freight we NO LONGER allow customers to arrange their shipments. Unless approved prior to end of auction. Please contact us at 812-623-6100 for approval. Thank you. WAREHOUSE FLOOR(J) SW/825 DS 3/10/15. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On Mar-10-15 at 09:14:40 PDT. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14c0658d349-0x111-
$
2495.00
1d 16h 43m 46s
0 bids
$5200.00 Now
$1500.00 Shipping
Condition: Used
Location: Spokane, United States
KUKA KR200 6-Axis Robot Don’t know much about it. You get what you see.
$
5850.00
Buy It Now
$134.31 Shipping
Condition: New – Open box
Location: Sterling Heights, United States
Upper guarding, lexan with 1 side open for access. 1 side safety access doors. Repeatability: 0.2 mm. Reach: 2200mm. New, used at 3 tradeshows as a non-powered ... moredemo. New, used at 3 tradeshows as a demo.
$
749.99
7h 59m 31s
0 bids
Condition: For parts or not working
Location: Aurora, United States
~ ~IRB6000-5510 M93~ ~.
$
22000.00
3d 14h 7m 14s
0 bids
$30.21 Shipping
Condition: Used
Location: Willis, United States
Universal Robots UR3e - we bought this robot in 2020 and didn’t end up needed it for our application. It works great, basically brand new and no issues ... moreat all. Comes with original packaging, manual, pendant with protective case and screen protector. Additional accessories are available but not included are a wrist camera and vacuum picker. If you have any questions, let me know.
$
300.00
5d 19h 50m 4s
0 bids
$500.00 Now
$31.86 Shipping
Condition: Used
Location: Cornelius, United States
Eshed Robotec SCORBOT-ER III Robotic Arm Robot with controller the controller turns on and turns robot arm with motor test it does few functions turns ... morea quarter turn then moves base and arm a little. It appears to work I don’t know much about them so everything sale to go.
$
2399.00
9d 14h 51m 10s
0 bids
$3799.00 Now
Free Shipping
Condition: Used
Location: North Tonawanda, United States
High rigidity arm design yields maximum performance. Used for a Wide Variety of Applications and Industries. Clean/ESD Models Available. GUI Builder.
$
1500.00
Buy It Now
Condition: Used
Location: Tallahassee, United States
This robot gripper and arm is a small industrial robot. It is used for tasks such as assembling products or handling chemicals. The arm, including the ... moregripper, has six degrees of freedom, and is driven by electric motors connected to the joints by belts.
$
9800.00
Buy It Now
Condition: Used
Location: Arlington, United States
Up for sale is my cobot Baxter from ReThink Robotics. Easy teaching mode allows you to teach Baxter what to do instead of having to write a typical robotic ... moreprogram. We have a few accessories, but we are in the process of moving.
$
245.00
Buy It Now
$90.09 Shipping
Condition: For parts or not working
Location: Corvallis, United States
CRS Plus A460 robot arm in parts -- one motor is not mounted -- heavy duty industrial arm -- arm extends to about 24 in. with an 8 by 8 in. base / about ... more36 in.
$
3500.00
4d 22h 30m 1s
0 bids
$9500.00 Now
$1500.00 Shipping
Condition: Used
Location: Plattsburgh, United States
600V, 3ph, 60hz. Inventory # ROB-065. Price shown for each unit. Manufacturer's Warranty and Support DO NOT apply. Condition USED.
$
2250.00
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Trossen Robotics Interbotix WidowX 250 Robot Arm 5DOF - NEW - Unused. WidowX 250. See the WidowX 250 Robot Arm in action at The WidowX 250 Robot Arm belongs ... moreto a new family of arms from. Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors.
$
30.50
Buy It Now
$2.41 Shipping
Condition: New
Location: China
Arduino Robot 6 DOF Aluminium Clamp Claw Mount kit. 1PC Aluminium Clamp Claw. The Kit without servos( In this clamp claw kit, you'd better use MG996R ... moreservos for the joint bears larger force,while MG995 servos for joints bears relatively smaller force.).
$
8500.00
Buy It Now
Condition: Used
Location: Oak Hill, United States
Kuka KR210 Robot Arm With Ship Mount Roboter. Was brand new when we bought it unit only Please view pictures to make sure item is correct for your needs. ... moreAll offers are considered. Let’s make a deal! Buy with confidence & feel free to check our feedback. Thank you. More photos available check last photo thank you
$
199.99
Buy It Now
Free Shipping
Condition: Used
Location: Seagoville, United States
$
117.99
Buy It Now
Free Shipping
Condition: New
Location: China
DIY Robot Plotter Drawing Machine.
$
65.00
Buy It Now
Free Shipping
Condition: Used
Location: New Milford, United States
TESTED ready to install.
$
35.76
Buy It Now
$3.50 Shipping
Condition: New
Location: China
Height: 460mm (holder closed). Arduino Robot 6 DOF Aluminium Clamp Claw Mount kit. Arduino Module. 1 x Aluminium Clamp Claw. -The Kit without servos (In ... morethis clamp claw kit, you'd better use MG996R servos for the joint bears larger force, while MG995 servos for joints bears relatively smaller force.).
$
4999.99
Buy It Now
Condition: Used
Location: Henning, United States
$
395.00
Buy It Now
Free Shipping
Condition: Used
Location: Centralia, United States
Fanuc A05B-2301-C372 Teach Pendant Condition- Used In general good condition and in working order Used to control a welding robot Contact info: Unit 1 ... moreBritannia Park Ind Estate North Road. Cobridge, Stoke on Trent St6 2pz Tel: 01782 266664 Fax: 01782 280180 Posted with
$
31.14
Buy It Now
$10.75 Shipping
Condition: New
Location: Addison, United States
1 L298N (motor drive module). 1 HC-SR04 (obstacle avoidance module). 2 gear motor. 1 omni-directional wheel. The battery box can hold four batteries, ... moreconvenient for the entire power system. 1 battery box (without battery).
$
1243.14
Buy It Now
Condition: Used
Location: Sunman, United States
The photos that are provided are a representation, of the item. The color of the photo may vary from the actual product due to translation and reproduction ... morelimitations of photography. make Supersized seem small.
$
4999.99
Buy It Now
$300.00 Shipping
Condition: For parts or not working
Location: Hutto, United States
Qty ( 1 ) Rethink Robotics BAXTER BR-01 Industrial Robot ( p/n 00012541 ). Physical Condition: Clean robot body shows trivial signs of use such as light ... morescuffs or scratches, see photos. Qty ( 2 ) Gripper Kit Cases (maybe already installed on the robot see photos).
$
20000.00
Buy It Now
Condition: Used
Location: Pontiac, United States
KUKA KR16 L6-2. KUKA KR16-L6-2. Complete Robotic System!
$
22.46
Buy It Now
$3.40 Shipping
Condition: New
Location: China
$
34500.00
Buy It Now
Free Shipping
Condition: Used
Location: Lima, United States
Aubo Collaborative welding system. Turnkey setup, ready to run. Includes EVERYTHING you need to begin automated welding (no gas tank included) AUBO 5kg ... morerobot. Don't miss this opportunity for a ready to run collaborative (cobot) welding setup for less than the cost of just a UR robot.
$
11999.99
Buy It Now
$1500.00 Shipping
Condition: Used
Location: Sparks, United States
Robot is in good working order in custom 46x46" work cell. We tested the motion on all axis with the teach pendant, and everything moves nice and smooth. ... moreThis will aide in providing a more accurate quote.
$
3400.00
Buy It Now
$230.00 Shipping
Condition: Used
Location: Round Lake, United States
Complete Denso 5 axis robot system. VP -5243E/GM - RC5-VPE5/6CA-BP - MP5E4. This complete robot system was just removed from a working assembly and test ... morecell. Battery was changed in April of last year.
$
3000.00
Buy It Now
Condition: Used
Location: New Paris, United States
Yaskawa Motoman SP80X Robot Type: YR-SP800-A02 Payload: 80kgDate: 07/2004Location: RPM RoomThis listing is for the robot only. Robot will ship via freight ... morecarrier. Please contact us for any questions you may have on this listing.
$
542.60
Buy It Now
Free Shipping
Condition: New
Location: China
Bionic Open Source Robot Dog. Strong protection : High-strength injection molded plastic provides the best protection against collisions and dust (not ... morewaterproof!). In this lesson we’re going to have an in-depth look at the modules that Bittle is made of and how they’re all interconnected.
$
151.99
Buy It Now
Free Shipping
Condition: New
Location: China
Servo weight: about 880g. - 1 x Set of Servo". Alloy gear high torque motor. Industrial robot automation. - Materials: Gears and shafts: alloy steel, ... morehardened steel, aluminum alloy; Shell: aluminum alloy.
$
60.90
Buy It Now
$3.50 Shipping
Condition: New
Location: China
1 x 5DOF Humanoid 5 Fingers Manipulator Arm Right Hand kits. - More flexible and can move freely. You can DIY. -This is DIY kit,not finished, pls note ... moreit ! - Right Hand.
$
39.61
Buy It Now
$1.66 Shipping
Condition: New
Location: United States
Color: dark grey, light grey, army green(optional). - Screw nut x 1 set. If item is defective after 3 months, you can still send it back to us. We will ... moresend you a new one after receiving the defective item.
$
600.00
Buy It Now
Free Shipping
Condition: Used
Location: Napoleon, United States
Model No: MHE2.
$
1700.00
Buy It Now
$25.00 Shipping
Condition: Seller refurbished
Location: Allen Park, United States
THIS IS A USED FANUC A05B-2518-C202#ESW /SWE2 TEACH PENDANT. REFURBISHED AND FULLY TESTED, READY TO WORK IN YOUR SYSTEM. ITEM CONDITION IS LIKE NEW. BECAUSE ... moreTHIS IS AN ELECTRONIC ITEM, NO RETURNS WILL BE ACCEPTED. ALL SALES ARE FINAL. WILL ONLY SELL AND SHIP INSIDE THE CONTIGUOUS UNITED STATES. NO FOREIGN SALES OR SHIPMENT. NO SHIPMENT TO ANY P.O. BOX. IMMEDIATE PAYPAL PAYMENT REQUIRED. FAST SHIPPING INSIDE THE U.S. CAREFULLY PACKAGED TO GET TO YOU IN THE SAME CONDITION AS THE PICTURES. PLEASE LOOK AT THEM VERY CAREFULLY BEFORE BUYING. THANKS FOR LOOKING. 
$
8000.00
Buy It Now
Condition: Used
Location: Pontiac, United States
FANUC R-2000iA 200F w/ RJ3iB. FANUC R-2000iA 200F Robot. Complete Robotic System! Refurbished in 2020 - Great Condition. Maximum Load: 200 kg. Hours: ... moreComplete Refurbished in 2020.
$
13299.99
Buy It Now
Condition: Used
Location: Baroda, United States
If you are not able to pick up locally, we are able to get competitive freight quotes as well.
$
45994.00
Buy It Now
Condition: Used
Location: Warren, United States
Robot is tested and complete with cables and teach pendant.
$
377.19
Buy It Now
Condition: For parts or not working
Location: Baroda, United States
Cordsets shown ARE included. If you are not able to pick up locally, we are able to get competitive freight quotes as well.
$
2600.00
Buy It Now
$200.00 Shipping
Condition: Used
Location: Scottsburg, United States
$
2999.99
Buy It Now
$250.00 Shipping
Condition: Used
Location: Rancho Cordova, United States
Item was recently removed from working service and is in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in good condition ... moreshowing minor scuffs / scratches / blemishes from previous use. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have.
$
1000.00
Buy It Now
Condition: For parts or not working
Location: Osseo, United States
I & J FISNAR DISPENSING ROBOT. ROBOT ARM SLIDES BACK AND FORTH ON TOP CHANNEL. MODEL I & J 2300. PART # I & J 2200-WIN, VERSION: JRPDE 3.00, DESC: ROBOT ... moreWINDOWS SOFTWARE CD. HAS 37 PIN HOLE RS232 PORT THAT CONNECTS TO CPU (CPU HAS NO HAND DRIVE).
$
4999.99
Buy It Now
$100.00 Shipping
Condition: Used
Location: Rancho Cordova, United States
Tested working and is guaranteed functional. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. Includes Robot ... moreController, Cables, and Manipulator as pictured. No additional items or accessories are included. Unless pictured, no power adapter / power cable included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. .
$
6733.13
Buy It Now
Free Shipping
Condition: Used
Location: Delta, United States
Category:Robot Arms. Rotary Lobe Blowers. Knife Gate Valves. Gate Valves. Heating and Cooling. Cooling Fans. Gear Reducers. Tool Storage.
$
1750.00
Buy It Now
Free Shipping
Condition: Used
Location: San Diego, United States
---HYPERTHERM POWERMAX600 PLASMA CUTTER, REQUIRES 480VAC 3 PHASE 50/60Hz INPUT ---Condition: Good ---TESTED AND GUARANTEED TO BE WORKING ON ARRIVAL ---BUYERS ... moreHAS 60 DAYS TO RETURN IF NOT FULLY SATISFIED.
$
42000.00
Buy It Now
Condition: Used
Location: Pontiac, United States
FANUC R-2000iC 210F Robot w/ R30iB. FANUC R-2000iC 210F Robot. NEW NEVER INSTALLED - Excellent condition. Maximum Load: 210 kg. Complete Robotic System! ... moreYear: 2017.
$
400.00
Buy It Now
$19.35 Shipping
Condition: New
Location: Burnsville, United States
Fanuc M-2IA Link Arm.
$
22000.00
Buy It Now
Free Shipping
Condition: Used
Location: Sunland, United States
OB7 7-Axis Collaborative Robot by Productive Robotics Lightly Used. We purchased this directly from the company last year and paid over 27K , all this ... moretime we used it for less than 5 hours total ! So it’s like a brand new unit.Here is your chance to own it for much less ! We are located in Tujunga CA and ITS ONLY FOR PICKUP ! It’s a heavy unit so we can not ship.Comes with the Arm , gripper, handheld controller , Wi-Fi unit, backup charger , the pc controller and the table !Any questions feel free to ask !We are selling it because right after purchase , our plans for use of this machine changed and ever since it’s just sitting here !
$
3000.00
Buy It Now
Condition: Used
Location: Bosque Farms, United States
For us to check rates, we need the following info: 1. We do not have power cords to provide unless they are attached to the item or unless stated that ... morethey are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
$
350.00
Buy It Now
Condition: Used
Location: Santa Paula, United States
LOC:GAR1,SCHLF1.
$
11.99
Buy It Now
Free Shipping
Condition: New
Location: Springfield, United States
, Part Number 069286-001. If not, then they would be handy for all sorts of applications that just require a nice little spring. One end has a smooth ... morethin washer welded, soldered, or otherwise attached.
$
625.00
Buy It Now
$120.00 Shipping
Condition: Used
Location: San Gabriel, United States
Amatrol Pegasus Robot Arm Training System Assembly Robotic Control. Very clean robot . This listing only for robot no controller
$
1999.00
Buy It Now
Condition: Used
Location: Boston, United States
Still works. Am able to move all axis with the pendant. The item in the pictures is the item for sale. This is a used robot and shows signs of use. Video ... moreavailable if you want to see it moving.
$
1600.00
Buy It Now
Free Shipping
Condition: Used
Location: China
Well-tested used DSQC679 3HAC028357-001 “80% -95% New, 100% Tested, in Good Condition”.
$
165.00
Buy It Now
Free Shipping
Condition: Used
Location: Lakeview, United States
Good clean takeouts from a machine no longer in service.
$
15.88
Buy It Now
$3.00 Shipping
Condition: New
Location: China
DRA818U is the successive version of DRA808M which is based on RDA1845. DRA818V is the VHF band version of DRA818U. DRA818U is a type of compact wireless ... morevoice transceiver module based on RFIC RDA1846 and works in UHF band.
$
43.00
Buy It Now
Free Shipping
Condition: New
Location: Osseo, United States
Denso Wave Robot HS/HSS (Standard Type). Japan Aviation Electronics Industry Ltd. SCRN6A25-24S (Round Connector). Connector Set (410889-0070). JMSP2119M ... more(Straight Plug). DDK Electronics, Inc. Model # : 410889-0070.
$
564.00
18h 14m 12s
1 bids
$12000.00 Now
$26.25 Shipping
Condition: Used
Location: Austin, United States
Yaskawa Motoman HP6S Robot Working at time of salvage. YR_HP6_A100. Motoman Complete, was working when retired. AS IS. Local Pick up Austin TX.
$
84.68
Buy It Now
Free Shipping
Condition: New
Location: China
1 x Robot Manipulator Arm Model. - The arm joints can be adjusted manually. - It can be moved to all of its six axes. - Scale: 1:10. - This model is only ... morefor showing, collection and decoration. - Total Length: about 33cm.
$
99.99
Buy It Now
Free Shipping
Condition: New
Location: China
6-Axis 3D Robot Manipulator Arm Model Vertical Multiple-joint for Fanuc R-2000iC Robot Model. - 1 x Robot Manipulator Arm Model. - The arm joints can ... morebe adjusted manually. - It can be moved to all of its six axes.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
SPHERO ROBOTIC GAMING SYSTEM FOR iPOD iPHONE iPAD iOS AND ANDROID
This is a used Sphero robotic gaming system in great condition. It has only been played with a couple of times. Included are: Sphero robotic ball. Inductive charging base and adapter. Game cards, Quick-Start guide and Product information guide. Again. Sphero is used, but looks and works great. Box is cut and tore. But will be included. Product Description From the Manufacturer Sphero is the first robotic ball gaming device that you control with a tilt. Touch, or swing from your smartphone or tablet. You can even use Sphero as a controller for on-screen gameplay. Sphero interacts seamlessly with mobile apps, giving you new ways to test your skills, play games with friends, and more. A Bluetooth connection makes Sphero ready to play as fast as you can launch an app. And with single- or multi-player games, Sphero will always surprise you. Acclaimed ... moreby Popular Science. Forbes, Wall Street Journal, and MSNBC and featured as one of the year's hottest gadgets by TechCrunch, Wired, Gizmodo, Engadget, and Make magazine, Sphero offers a new type of game play for the smartphone generation. Simple. Yet Challenging Controlling Sphero from your mobile device is easy and intuitive-just tilt. Gesture, or swing, and Sphero responds. Because your experience changes with every new app you download, Sphero's entertainment never stops. Sphero's reliable Bluetooth connection ensures control is always responsive and fluid. Even at long ranges. You will be able to steer through homemade obstacle courses, weave it between feet, and even out-maneuver your family pet. Sphero Apps Offer Engaging. Mixed-Reality Gameplay Sphero immerses you in a new type of gameplay called mixed-reality. In which real and virtual elements are seamlessly merged together. With several free apps available for download(and more continuously being developed) Sphero provides you with plenty of gaming thrills. Standout apps include Sphero Drive. Where you can choose from touchscreen interfaces like joystick, old-school RC control, and tilt mode to give y
Gibson Tronical Robot Les Paul SG Full Electronics Build Kit
Hi All, Up For Sale is a Gibson Tronical Robot Electronics Assembly. This was removed from a gen(1) Robot Guitar. I was going to install this inside a custom guitar I was building. And then changed my mind. And bought the Gibson Darkfire instead! EVERYTHING works perfectly. And was disassembled carefully, as to leave most everything still soldered/intact for ease of reassembly. YOU MUST HOWEVER KNOW WHAT YOU ARE DOING! Would also make a great spare parts kit for a Robot lover, as these guitars are no longer manufactured. Priced to sell! however. Being that I have no idea as to potential buyers skill set. And usage ideas, these are being sold as is and no returns item. You can rest assured of my description. As my feedback shows I aint no BOZO! Rock n Ride!
MITSUBISHI MELSEC 0508D PROGRAMMABLE CONTROLLER CHASSIS WITH 5 MODULES
Descriptions and Feature This listing is for a MITSUBISHI MELSEC 0508D PROGRAMMABLE CONTROLLER CHASSIS WITH 5 MODULES. 1)A61P. AJ71PT32-S3, 1)A68AD, 1)AY42, 1)AD71 Item is in good cosmetic condition. Please refer to pictures. Pictures are of the actual item for sale. AUCTION INCLUDED: Unit AS SEEN IN PICTURE* NOTE FOR BUYER* If you buyer has any problem with product purchase. Please contact us immediately we will resolve it quickly, please don't leave OPEN CASE on ebay or leave Negative feedback before contact us. Payment Policy: Only PayPal is Accepted = buyer can pay credit card through paypal. Immediate Payment is required after the Winning Bid Item will be shipped immediately on the same or next business day of receiving full payment California buyer must pay 8.375% tax unless you have resales certificate. Shipping Policy Shipping ... morewithin the 48 Contiguous United States only and ship fedex Ground If you need international shipping. Please contact before you bid Paypal Confirmed Addresses Only= NO PO BOX, Tracking number will be provided to your Paypal account right after shipping label is created Returns Policy E.N.S provided 2 days warranty on all merchandise unless stated above. E.N.S will replace your purchase within(7) days of your invoice date(refund amount will not include the original shipping charges) Any item must be returned complete and free of damage to be eligible for a exchange or refund. Buyers must pay return shipping. Terms& Conditions Payment must be received within 3 days from auction closing. If payment is not received timely. I will relist the item or sell to second highest bidder and file the non-payment with Ebay. Please check your system compability or ask before bidding. Please do'nt bid then ask. Guarantee We welcome your questions by E-MAIL. But you are expected to do your own research in regard to the compatibility and/or software/driver requirements for any item they are considering purchasing. We will not be responsible for any incompatibility issues with your
LASER MIRROR TABLE BOX W/ OPTICS & FILTERS ADJUSTABLE 24 x 16 x 6 INSIDE BOX
Click on the pictures to ENLARGE LASER MIRROR TABLE BOX W/ OPTICS& FILTERS ADJUSTABLE 24 x 16 x 6 INSIDE BOX THIS IS A REAL NICE LASER TABLE WITH A TON OF OPTICS. FILTERS AND OTHER GOODIES BOX IS APPROX 24 x 16 x 6" INSIDE IT HAS A STEPPER MOTOR ADJUSTABLE STAGE WITH COUNTER AND HAS MANUAL OUTSIDE BOX ADJUSTMENTS ON ALL SIDES- STEPPER HAS NO DRIVER JUST WIRES THERE IS NO MARKINGS AS TO THE MANUFACTURER BUT IT IS DEFINITELY HIGH END& WELL MADE HAS 2 OF THE MIRROR THAT ARE CHIPPED ON THE EDGE BECAUSE SOMEONE LEFT THEM LOOSE INSIDE DURING TRANSIT- WE HAVE SECURED THEM IN FOAM SO THEY DO NO MORE DAMAGE- SEE PICTURE THERE IS NO LASER WITH THIS JUST TABLE AND OPTICS AS SHOWN IN PICTURES. INCLUDES A SMOKED PLEXIGLASS TOP COVER SHIPPING WILL BE HIGH ON THIS BECAUSE OF THE DIMENSIONAL WEIGHT- 90# AND IT WILL NEED A LOT OF FOAM PACKING ... moreUPS SHIPPING ONLY- IF THE CALCULATOR DOES NOT WORK FOR YOUR ZIP- CONTACT ME FOR A QUOTE ENTER YOUR ZIP CODE IN THE EBAY/UPS CALCULATOR FOR SHIPPING COST- THIS IS WHAT YOU WILL PAY FOR SHIPPING My Policies: TERMS PAYMENT DUE WITHIN 10 DAYS OF AUCTION CLOSE PA RESIDENTS MUST PAY SALES TAX We take Pay-Pal payments& other forms of ebay approved& NON APPROVED payments. We do not take credit cards directly- only thru PayPal. We only ship by UPS. USPS or TRUCK& have UPS daily pickup. Payment received by 10:00am will usually ship(UPS or USPS) same day- otherwise next business day. Truck shipments will ship within 2-3 business days. You are buying only what is shown in the pictures unless otherwise stated in the description! Any currency or coins shown in pictures are for size reference only and are not included in the auction. UPS/ TRUCK SHIPPING INSTRUCTIONS Any above shipping instructions(like truck shipping) take precedence over these UPS instructions Buyer pays shipping costs as shown by the eBay shipping calculator Shipping will be by UPS or USPS ONLY unless truck shipping applies-Cost can be checked by entering your zip code in the below eBay shipping calculator-If cal
Brooks Automation TT1ENR2-1-TVS-ES-BROOKS8 Teach Pendant working
This Brooks Automation teach pendant is used. Working surplus. The physical condition is good and clean, but has scratches from previous use and handling. Part No: TT1ENR2-1-TVS-ES-BROOKS8 Condition: Working. 90 Day Warranty. Estimated Packed Shipping Dimensions: L x W x H = 14" x 14" x 14" 6 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 4 Can't find the answer you're ... morelooking for? contact us! Business Hours: 8am to 5pm MST Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30am to 4pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505.345.8732, Fax: 505.345.8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 7% Sales tax applies to NEW MEXICO residents(or provide a resale tax ID for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business days for handling(possibly longer for freight items) All tracking information is forwarded to the email address associated with your Pa
STANLEY SIGMA SYSTEM CONTROLLER SG-SIGMA-202-001
STANLEY SIGMA SYSTEM CONTROLLER SG-SIGMA-202-001 Search STANLEY Assembly Technologies SIGMA SYSTEM TORQUE CONTROLLER MODEL: SG-SIGMA-202-001 USED CONDITION CLICK THIS-LINK TO VIEW THE STANLEY BROCHURE FOR THIS ITEM. STANLEY INFO IS AS FOLLOWS: The Sigma interface manages as many as 12 Alpha controllers. Integral PLC capability uses one of multiple Fieldbus technologies. As a DeviceNet Master with Ladder Logic Engine. It can manage an entire workstation. Optional Tool Logic Control in Fastening Toolbox Deluxe software simplifies ladder logic programming. Communications capabilities include Ethernet. Multiple Fieldbus technologies, Serial and Parallel ports. Plus 24VDC I/O. As a DeviceNet master. It is capable of integrating thousands of ODVA compatible peripheral products, including expansion I/O. Socket trays, barcode scanners. Touch screens, ... morelimit switches. Light screens, and many more. GUARANTEED NOT D.O.A. QZ 170 SW/22-CB-7/12/11 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers, we combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for SEVEN(7) DAYS. We will NOT accept anything after SEVEN(7) DAYS after item has been received. So please contact us ASAP. We do our best to accurately describe the items that we are selling. If you have
Brooks Automation Equipe Robot 3 Cable Set 2002-0011-07SCE Used Working
You are bidding on a Set of Three Brooks Automation Equipe Robot Cables in good condition Included are: 2002-0012-07PCE 2002-0031-07SCE 2002-0011-07SCE These cables were removed from an Equipe system that was recently parted out. The cables all work well and are ready to be put back to use. If you have any questions regarding this listing. Please contact me via the eBay message system and I will help you out. The shipping and packaging fees will be $19.95 within the USA This includes professional packing in a new box. Shipping charges, and insurance + tracking number If you don't live in the US. Please contact me and we can determine the cost of shipping to your location. Thank you for looking and please check out my other listings for more interesting merchandise.
Brooks Robot TT1ENR2-1-TVS-ES-BROOKS8 Remote Control Teach Pendant Controller
Questions? Call us: 1-877-328-9236. Brooks Robot TT1ENR2-1-TVS-ES-BROOKS8 Remote Control Teach Pendant Controller. Manufacturer: Brooks Model: TT1ENR2-1-TVS-ES-BROOKS8 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Brooks Condition: Used. Comes in non-original packaging. This pendant is in Very Good cosmetic condition. Notes: We have not tested this part. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Brooks TT1ENR2-1-TVS-ES-BROOKS8 Pendant, Specifications: Manufacturer: Brooks, Model: TT1ENR2-1-TVS-ES-BROOKS8, Robot Control/Teach Pendant, SKU: N15D011 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla ... moreespanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their direct employees. Warranty. This item is guaranteed to be as described. The buyer must notify
Pneumatic Robotic Robot Wafer Transfer Arm Assembly
Search our eBay Store! Pneumatic Robotic Robot Wafer Transfer Arm Assembly SKU: HS-NIC-C-ROBARM Condition: Used Packaging: Pallet/Skid Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Custom Pneumatic Robotic Wafer Transfer Robot Arm Assembly. Physical Condition: Great; Unit has minor scuffs on it; Unit is attached to a pneumatic lift assembly; The lift assembly is mounted to a pentagon platform with wheels and a hand rail. We do not have the necessary resources to test this unit. Power cable is not included. Dimensions(L"W"H" 27* 27* 56 ¼ PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT ... moreREQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If y
Denso 4 Axis Robot HM-4060*GM-W+RC7Controller+Mini Pendant (Dust and Mistproof)
DENSO 4 AXIS ROBOT HM-4060*GM-W(DUST& MISTPROOF) RC7 CONTROLLER(LATEST GENERATION) AND MINI PENDANT Original owner, Original packaging, The HM-Series four-axis SCARA robots offer outstanding speed and repeatability. Although these small industrial robots have a compact. Space saving design, they can handle 10 kg payloads. In addition, their maximum allowable moment of inertia of 0.45 kgm² is six times larger than that of conventional robots, permitting a wide variety of applications. ROBOT: DENSO 4 AXIS SCARA ROBOT. Used, Perfect working condition, Model: HM-40602E2/GM-W, Dust and Mistproof, 4 axes. Maximum reach 600mm(first arm 250mm, and second arm 350mm) Range of motion: J1(+/ 165) J2(+/143) Z(200, 300, 400, T(+/ 360) CONTROLLER: Model: RC7M-HMG4BA-BN, Controls 4 axes, Control system: PTP. CP 3-dimensional linear, 3-dimensional ... morelinear, Drive system: All axes. Full-digital AC servo, MINI PENDANT. Model: MP7ME3P4, Power Source: 24VDC( supplied from robot controller) LCD display, Payment type: paypal(buyer pays) or wire transfer. Shipping: freight(buyer pays) US ONLY.
Adept Controller Insert Model MV4 30350-15000 240V 5A
Adept Controller Insert Model MV4 30350-15000 240V 5A Part Number- 30350-15000 Serial Number- 3405-03225 REVH. Voltage- 1/PE 100- 240 V Current- 5.0 Amps Frequency- 50/60 Hz Manufactured- 2003 Unit also includes the following: APW Electronic Solutions Model Number- 282-612461 Rev- N Serial Number- E081203-17 Email or(978) 514-3800 for more information. Free Shipping within U.S. UPS Ground. International shipping available upon request. Contact us for quotes. Thanks for looking!
CLECO 5SRA-10BQ PNEUMATIC SHUTOFF SCREWDRIVER 3–40 IN-LBS 1100 RPM TESTED A+
CLECO 5SRA-10BQ PNEUMATIC SHUTOFF REVERSIBLE SCREWDRIVER IN EXCELLENT CONDITION. EXTREMELY CONSISTENT TORQUE. AS YOU CAN SEE IN THE PHOTOS. EXTERNALLY ADJUSTABLE TORQUE. 3–40 IN-LBS 0.4–4.5 Nm TORQUE 1100 RPM ¼" HEX THE SCREWDRIVER IN THE PICTURES IS THE ONE YOU WILL RECEIVE. EXACTLY AS YOU SEE IT HERE. INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING COST— IGNORE THE COST GIVEN BY EBAY.
IDS Ueye UI-1540-C Machine Vision USB Camera w/ Computar 12mm Lens
Although we welcome your questions and inquiries by e-mail or phone. Bidders are expected to do their own research in regard to the compatibility and/or software/driver requirements for any item they are considering purchasing. In most cases. All information that we have available to us is included in the text of the auction. IDS Ueye UI-1540-C Machine Vision USB Camera w/ Computar 12mm Lens No manuals. Cables or other accessories included, sold as pictured. Used. Untested, good comsetic condition, guaranteed 14-Days. Condition Used, Warranty 14-Day Warranty. This item is sold with a 14-day warranty. The seller reserves the right to choose to either replace or refund at our discretion, based on the availability and feasibility of replacement product. Items returned for warranty replacement or refund will be subject to return shipping at buyer's ... moreexpense. Shipment of replacement items will be done at seller's expense(Ground shipping) In the event of refund due to product failure. Full purchase price will be refunded to buyer within three business days following receipt& inspection of return. Items must be returned in original packaging or similar packing, insured for purchase value. No Refund will be made for shipping costs. Should Seller accept a return of working product. Or if buyer requests an exchange, a 15% re-stocking fee will apply, based on the final selling price, with a $5.00 minimum. For items that may occasionally be received damaged in transit. Buyer must notify seller immediately upon receipt. Original packaging must remain intact. Seller will initiate a damaged claim with the appropriate carrier, and determination of refund/replacement will be made by seller following carrier's inspection of the damaged package. Items Shipped to destinations outside the United States will have any and all warranties voided. Domestic Shipping Information Shipping via UPS. Buyer can specify ground or air. Buyer is responsible for shipping costs. International Shipping 15.00 service charge will be appli
Mitutoyo AT102 Linear Scale. AT-102-200. Guaranteed, fast, free shipping. Offer?
Here is a gently used Mitutoyo linear scale. Model AT-102-200. Unit was installed on a machine for a few weeks before the customer went another route. No bad marks. Broken pieces, or issues of any kind. You can't go wrong buying this gently used item from me. I am listing a few other LINEAR units, so check out my other items for sale. I always combine shipping and work out package deals. This sale price will include the shipping for free!
VESSEL AIR NIPPER GT-NT03 WITH BLADE-IN FACTORY BOX!!!
VESSEL AIR NIPPER GT-NT03 WITH BLADE-IN FACTORY BOX! Used IN FACTORY BOX-GOOD BLADE- SEE BLADE LISTINGS FOR PRICES ON NEW BLADES! PLEASE SEE PICTURES FOR MORE DETAILS. We have a 100% GUARANTEE minus shipping on all DOA's. SHIPPING We ship the most practical way to save time and money. Shipping Discounts are available for multiple purchases. We charge only actual shipping cost for items. Item(s) will generally be shipped within 2 business days of receipt of payment via UPS and USPS. JASH-SB REVISED JASH-SB
Adept tech 10332-48712 rev. B with 01-W3973B & 01-W3868B
Used. Working condition. Serial no. 2945251 Main board 01-W3884B IC's label: 14951-24100 U47 B" 2 cards mounted on it are: 01-W3973B 01A& 01-W3868B 01A. Any accessories. Manuals, driver etc. that are included are itemized or picture in the auction listing. If it is not listed, it is not included. Attention: If there is anything wrong with the item that you have purchased. Please do not leave negative feedback. Just contact us and we fix the issue smoothly. INTERNATIONAL BUYER Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. This unit is sold with a 14 day DOA return agreement. If the unit fails to perform as expected. ... moreI will refund your purchase price less shipping charges. Combine shipping is welcome to reduce total shipping cost. Provide your telephone number to avoid delay in shipment. Shipping cost from Singapore to USA via singpost normal air(takes 15 working days) Loc: B2-4C-16. Powered by The free listing tool. List your items fast and easy and manage your active items.
Miller Daihen OTC Robotic Teach Pendant Miller/Daihen C2 Robot
Miller Daihen OTC Robotic Teach Pendant Miller/Daihen C2 Robot Small hairline crack on back of case. But works great.
MILLER ROBOTIC INTERFACE II MICROPROCESSOR WELD CONTROLLER
Good working used Miller robotic welding interface II. The robot itself had more problems than was worth fixing so we replaced it. This unit was working with it when we took the bot out of service. It is time to get it out of storage. It has normal wear and tear scratches.
Norgren 1/8" PIF Pneumatic 20-Station Solenoid Control Valve Manifold/Bank 24VDC
Search our eBay Store! Norgren 1/8" PIF Pneumatic 20-Station Solenoid Control Valve Manifold/Bank 24VDC SKU: JV-HAN-C-SLV1076520 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Norgren 1/8" PIF Pneumatic 20-Station Solenoid Control Valve Manifold/Bank 24VDC. Model: SLV/10765/20. Voltage: 24 Vdc. Operating Pressure: 2-8 Bar. Inlet/Exhaust Port Size: 1/4” Push-in Fitting. Port Outlet Size: 1/8” Push-in Fitting. Number of Stations: 20(2 valves/station) Port Configuration: Bottom Port Openings. Solenoid P/N: 11-311PI060H0+F110175. Solenoid Power: 24V DC 0.8W. We believe this unit is a Multipole ... morePicosol 3/2 Normally Closed Double Row Valve Island. However we are uncertain. Physical Condition: Good– unit has some scuffs/scratch marks on manifold body. All ports appear to be in good condition. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Power adapter is not included. Dimensions(L" x W" x H" 10-3/8 x 3-1/8 x 2. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. P
Allen-Bradley Fire Control Panel/Board Monitor. NO RESERVE!!!!!!
Allen-Bradley Fire Control Panel/Board. No major scratches. Dents or cracks. In full working order- excellent condition! No reserve! Please ask all questions before bidding!
Vintage Simplex Uni-Lift Worm Gear 10:1
You've been checking eBay for months trying to find this item right? Well you have finally found it. Everything turns freely and the gear ratio is 10:1 Any other questions just ask. I know that we are equally concerned about the impact shipping has on the environment. So at no additional cost to the buyer. I pay the added cost for carbon neutral shipping where applicable. It is my goal to make you a repeat customer and get you to add me to your favorite sellers list. So my shop policies are short and sweet. I assume that you agree with these policies when you buy any of my stuff. Please take a look for yourself to avoid any confusion. Free shipping(if applicable) is for lower 48 only. Outside of U.S.A. ignore the quoted shipping cost and contact me for ACTUAL rates BEFORE BUYING. I do not ship on weekends because I'm out looking for ... moremore great stuff like this. If you are not happy with any item you purchase from me and you choose to leave NEGATIVE feedback rather than return item for a refund. That will be fine. I make an honest effort to list every item accurately but have come to realize it is impossible to measure the expectations of each individual buyer on items that are used to begin with. In the event of a refund the buyer(that would be you) pays all return shipping cost and agrees to the sellers(that would be me) discretion of issuing refund via PayPal or personal check. ShipSaver.
Fanuc 6M, 6T A20B-0007-0040/04A I/O circuit board
Here is a Fanuc A20B-0007-0040/04A I/O board. It probably works. But since I can't test it. I am listing the condition as parts or not working to be safe. The bid is for one. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. Multiple purchases on the same day will only be charged one fee. All international shipments will be through the U.S. post office ONLY. Payment will be via an international money order. Sales tax is charged for PA sales unless exempt* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e6011dfff-0xfe-
GE Fanuc IC600LX624K 24K MEM. ASM IS REPAIRED WITH A 30 DAY WARRANTY
Thank you for your inquiry on this Ebay item. If you should have any questions on this item, Please call Thank you from NorthEast cnc. J
BROOKS AUTOMATION TT1ENR2-1-TVS-ES- BROOKS 8 ROBOT TEACH PENDANT CONTROL
BROOKS AUTOMATION TT1ENR2-1-TVS-ES- BROOKS 8 ROBOT TEACH PENDANT CONTROL. Check out my!
Genmark Robot 4S0807210 Wafer Handler w/controller
You are Bidding on a used Genmark Robot 4S0807210 Wafer Handler w/controller Robot: 4S0807210 Controller: 9800109151 Part Number PA4120685 2 Robot brackets w/ball screw VTWGB4S Cables Returns If you receive your item. And it is significantly different than described, please contact us, and we will arrange a full refund or product exchange. We must receive the returned item(s) within(10 days) of original delivery. Items should be returned in the original packaging whenever possible. If this is not possible. The item should be packed to meet the carrier's insurable packaging specifications. Typically this requires a sturdy cardboard box with at least 2" of padding on all 6 sides. AS IS Items that are sold"AS IS" are not eligible for refunds or exchanges of any kind. As long as the item shipped is the correct item listed. ... moreOf course. Feedback We are happy to leave positive feedback as soon as your on-time payment clears. And we appreciate your positive feedback if your transaction is satisfactory. Remember, we are always willing to work with you on any problems you may experience, so please contact us before leaving negative feedback. If you are unfamiliar with the feedback system, please check out eBay's. Non-Paying Bidders Items that are not paid for within one week(7 days) of auction close with no contact or payment arrangement will be added back into our inventory. And an eBay non-paying-bidder claim will be filed. Sales Tax We charge sales tax on all of our customers in CA unless proper exclusion documentation is provided California Resale Certificate. Local Pickup Local pickup is welcome and is actually our preferred method of getting items to customers. Pickup hours are Monday-Friday 8am-4pm PST. Please email or call ahead for an appointment. Our physical address is: WastErasers: 1710 Little Orchard St: San Jose. CA 95125: United States Privacy Policy Any personal information a customer provides us is used STRICTLY for internal purposes. We will not. Under any circumstances, divulge a cu
Swagelok / Whitey Stainless 1/8" 40 Series 3-Way Ball Valve SS-41XS2 2 Available
Swagelok/ Whitey Stainless Steel 1/8" 40 Series 3-Way Ball Valve SS-41XS2 Used- Excellent Condition NEW SS Nuts and Ferrules Part No. SS-41GXS2 Description: SS 1-Piece 40 Series 3-Way Ball Valve. 0.15 Cv, 1/8 in. Swagelok Tube Fitting Swagelok Price: $89.00 My Price: BARGAIN- Less than 1/2 of Swagelok Price! If you need two of the very nice 3-way valves. Please place the no. 2 in the"Quantity" box above. Shipping is $7 for either one or two valves. Thank you. SPECIFICATION SUMMARY Actuator Type Manual Flow Path Standard(3-way) Flow Pattern Switching(3-way) Valve Material Stainless Steel End Connection 1 Size 1/8 in End Connection 1 Type Swagelok tube fitting End Connection 2 Size 1/8 in End Connection 2 Type Swagelok tube fitting End Connection 3 Size 1/8 in End Connection 3 Type Swagelok tube fitting Handle Color Black Handle ... moreStyle Lever Approval No Approval Ball/Stem Material Stainless Steel Body Vent No Cleaning Swagelok SC-10 Lubricant Dow M111 Packing Modified PTFE Ring/Disc Material Stainless Steel Sour Gas No Testing Testing according to WS-22 Max Temperature Pressure Rating 300°F@ 2500 PSIG/148°C@ 172 BAR Orifice 0.093 Room Temperature Pressure Rating 2500 PSIG@ 100°F/172@ BAR 37°C My Price: BARGAIN- Less than 1/2 of Swagelok Price! If you need two of the very nice 3-way valves. Please place the no. 2 in the"Quantity" box above. Shipping is $7 for either one or two valves. Thank you. Bid on My Auctions with Confidence. If you are not satisfied with your purchase, I will refund your money. Please check my other auctions for many more fittings and valves and BARGAIN prices. Thank You. Thank You for Looking at Our Equipment Auction Your Will Find A Good Deal Here We Sell A Wide Variety of Items Temperature Controllers Temperature. Readouts Thermocouples Pressure Controllers Pressure Readouts Pressure Transducers Swagelok Valves Hoke Valves Brass Valves Stainless Valves Stainless Sample Cylinders Data Loggers Data Recorders G
Mitsubishi Circuit Board PCB MC611B _ BN624A800G53 Rev J _ BN624A8OOG53
Our internal inventory number on this item is: NP#X4-17D PLEASE NOTE: This part is from a working machine. We have no way of testing it once it was removed. To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. CLICK HERE to Email Nu Tek Sales! Description: It is a Mitsubishi Circuit Board. Model Number: MC611B BN624A800G53 Rev J BN624A8OOG53 App. Weight: 1 Lb. Dimensions: 12.5" x 1" x 6.5" Cosmetic Condition Rating: 4-Good Note: This is solely a cosmetic description of the item. This part was pulled from a working machine. And is being sold in good working condition unless otherwise ... morestated! 1) Very Poor 2) Poor 3) Fair 4) Good 5) Like New Condition*NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Other Domestic Shipments pay $10.00 Boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $15.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express International. Only when requested. We ship USPS Priority; this carrier type lacks reliable tracking info. We cannot be held responsible for your shipment once it leaves US land) Please understand if we ship an item on your account. We ar
YASKAWA YASNAC POWER SUPPLY CPS-300 CPS300 CPS 300 ^^
Check out my! YASKAWA POWER SUPPLY UNIT TYPE: CPS-300 THIS IS IN GREAT WORKING CONDITION. Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. FREE SHIPPING TO ALL 48 STATES AND CANADA. ... moreFOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff that will strive to deliv
C75971 Rorze 12-inch Wafer Pre Aligner Prealigner Robot for 12" Wafers
C75971 Rorze 12-inch Wafer Pre Aligner Prealigner Robot for 12" Wafers(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C75971 This Rorze RA301-812-002 Wafer Robot Aligner/Prealigner looks to be in good cosmetic condition. Showing some minor signs of wear. However, I have no way of powering it up or testing it, and it is being sold as-is. It appears to be for use with 12-inch wafers. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $40.00(for DOMESTIC shipments only- 48 contiguous states excluding ... moreHawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 31.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate applies.
Rorze Robotics E-206 Interface Card Board
Rorze Robotics E-206 Interface Card Board All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. gsrx_vers_476(GS 6.4.4(476)
Rorze Robotics OR-057 Interface Card Board
Rorze Robotics OR-057 Interface Card Board All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. gsrx_vers_476(GS 6.4.4(476)
Rorze Robotics RS-114A Sensor Mate
Rorze Robotics RS-114A Sensor Mate All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee_gsrx_vers_476(GS 6.4.4(476)
Rorze RC-410 I/O Master Robotech DC 18-36VDC Din Rail Mount
Rorze RC-410 I/O Master Robotech DC 18-36VDC Din Rail Mount All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. gsrx_vers_476(GS 6.4.4(476)
Rorze RC-420 Generate Master on Din Rail Robotech DC 18-36VDC Robotics
Rorze RC-420 Generate Master on Din Rail Robotech DC 18-36VDC Robotics All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. gsrx_vers_476(GS 6.4.4(476)
Swagelok / Whitey 1/4 inch SS-43S4 1-Piece 40 Series Ball Valve Good Cond.
Swagelok SS-43S4 Stainless Steel 1/4 inch SS 1-Piece 40 Series Ball Valve Swagelok Tube Fittings Good Used Condition Note: Has New Nuts and Ferrules Part No. SS-43S4 Part Descrip. SS Swagelok 1-Piece 40 Series Ball Valve Material: Stainless Steel 1.4 Cv 3.000 psi Pressure Rating 1/4” OD Swagelok Tubing Fittings Swagelok Price is $89.30 Bid on My Auctions with Confidence. If you are not satisfied with your purchase, I will refund your money. Please check my other auctions for many Swagelok fittings and valves at BARGAIN Prices. Thank you. Please Check my Other Auctions for Many More Swagelok Fittings and Valves at Bargain Prices. Thank You for Looking at Our Equipment Auction Your Will Find A Good Deal Here We Sell A Wide Variety of Items Temperature Controllers Temperature. Readouts Thermocouples Pressure Controllers Pressure Readouts Pressure ... moreTransducers Swagelok Valves Hoke Valves Brass Valves Stainless Valves Stainless Sample Cylinders Data Loggers Data Recorders Greetings to all of my past and present customers. I( Hobbyfarm" am back to selling on eBay after being away for awhile. A few monthis ago I closed my oil field laboratory and as a result have a lot of laboratory and industrial instruments. Valves, and associated equipment for sale. In addition to the item(s) shown in the above auction I will usually have several more equipment auctions ru nning on eBay. Please check out my" Hobbyfarm" auctions and bid with confidence- if you are not satisfied with your purchase. I will refund your money. THANK YOU and BEST REGARDS Over the next several months we wiill be listing much more Pressure. Volume, and Temperature Equipment on our Hobbyfarm Auction. So please please put us in your favorite sellers and check back often. Below. There is a partial list of some of related items that we are currently listing, or will be listing in the future. If there is something on the list that you are interested in and it is not currently listed, just send me a note and I will start an auction for that item. Tha
Staubli Unimation 6 Axis RX90 CR Robot + CS7MB RX90BCR Controller
Staubli Unimation 6 Axis RX90 CR Robot + CS7MB RX90BCR Controller This auction is for controller and robot only. We do not have a pendant or cables. Hour meter reads 018254 79. This item will need to freighted. I can place on a pallet or in a crate if I have one. At no extra charge. Buyer responsible for shipping arrangements. Can be picked up locally.
ATI Industrial Automation Robotic Tool Changer
I will list this item as used because I am not sure if it is new or not. There are 3 sections to this item. One is part number QC310-M which is the main body. 9121-JC3-M is an add on block that holds a Mac Valve model AUA-000-GEUA-1GB. The third section is model number DH9-M which is the Harding connector which is hooked up to many wires and sensors. This item can be picked up in Sterling Heights. Michigan.
Motoman Teach Pendant JZNC-XPP02P
Motoman Teach Pendant JZNC-XPP02P. Used. Good Working Unit W/ Warranty. Please contact us if you have any questions concerning this item before bidding. Return Policy: Returns are not accepted for items sold“AS-IS” If the item comes with a warranty. The buyer must contact us within the specified warranty-period to arrange an exchange(if available) or return/refund. Returns are only accepted for warrantied items that are D.O.A. Returned i tems must be returned in the same condition received(no signs of abuse. Misapplied power, disassembled etc. Packaging/Handling/Shipping: All items are packaged appropriately to protect the contents from shipping damage. We do NOT charge a separate handling fee. We do not ship outside of the United States or Canada. Buyers must contact us to make arrangements for items requiring LTL shipment. Feedback: We ... morewant your experience with us to be pleasant. If we fall short on any aspect of your transaction with us. Please contact us before leaving feedback. We will make every attempt to make things right. Contact Us: 313) 537-9798. 9:00am– 5:00pm(Eastern) M-F. Location: SHELF
Micropipette Array
Micropipette Array Flat rate shipping in the continental US No international shipping please. Please see my other auctions
Machine Vision Camera LED and Strobe Assembly Cyberoptics
Machine Vision Camera LED and Strobe Assembly Cyberoptics Model 6503016 one camera one led array two strobes Flat rate shipping in the continental US No international shipping please. Please see my other auctions
Yasnac MRC Teach Pendant JZCN-MPP20E
Yasnac MRC Teach Pendant JZCN-MPP20E. Good Working Unit W/ Warranty. Please contact us if you have any questions concerning this item before bidding. Return Policy: Returns are not accepted for items sold“AS-IS” If the item comes with a warranty. The buyer must contact us within the specified warranty-period to arrange an exchange(if available) or return/refund. Returns are only accepted for warrantied items that are D.O.A. Returned i tems must be returned in the same condition received(no signs of abuse. Misapplied power, disassembled etc. Packaging/Handling/Shipping: All items are packaged appropriately to protect the contents from shipping damage. We do NOT charge a separate handling fee. We do not ship outside of the United States or Canada. Buyers must contact us to make arrangements for items requiring LTL shipment. Feedback: We want ... moreyour experience with us to be pleasant. If we fall short on any aspect of your transaction with us. Please contact us before leaving feedback. We will make every attempt to make things right. Contact Us: 313) 537-9798. 9:00am– 5:00pm(Eastern) M-F. Location: SHELF
ABB WELDING ISOLATION CONTACTOR, SIZE W4, 600VAC, 300A, 160W.
Inventory Number: 12091250679 Manufacturer: Description: ABB WELDING ISOLATION CONTACTOR. SIZE W4, 600VAC, 300A, 160W. Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, WIRES CUT FOR REMOVAL FROM MACHINE BEING SCRAPPED BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now ... morepricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE
DOPAG Pneumatic Metering and Dispensing Valve
DOPAG Pneumatic Metering and Dispensing Valve model 401.04.00 C Flat rate shipping in the continental US No international shipping please. Please see my other auctions
PRI Automation BM35006 CommKey Robot Controller Keypad Tower E-Stop FOR PARTS
Search our eBay Store! PRI Automation BM35006 CommKey Robot Controller Keypad Tower E-Stop FOR PARTS SKU: JV-RYA-B-PRI35PARTZ Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge PRI Automation BM35006 CommKey Precision Robot Controller Keypad Tower E-Stop. Model: BM35006 Physical Condition: Very Good. We do not have the necessary resources in our facility to test this unit. Unit is missing red emergency stop button. BEING SOLD AS-IS FOR PARTS OR REPAIR. Dimensions(L" W" H" 11* 4* 3 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING ... moreGOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're
Used Genmark GB4S 2347385-01-R Wafer Transfer Robot System Handler Gencobot
Genmark Wafer Transfer System Genmark Wafer Transfer System Description: Used Genmark GB4S 2347385-01-R Wafer Transfer Robot System Handler Gencobot Note: Item has been used-Item was tested working-Repaired unit was a spare Warranty: 30 Days SHIPPING Flat rate to continental U.S. We Ship USPS and UPS(MON-FRI) Daily pickups Based on your items size/weight/destination/etc. $95 Including Tracking Number Shipments outside continental U.S. are shipped USPS Additional shipping charges DO APPLY! Please email for shipping quote NOTE: THERE IS NO SUCH THING AS CHEAP INTERNATIONAL SHIPPING. U.S.P.S AND UPS HAVE BOTH CHANGED THEIR RATES. AND MINIMIZED THEIR SHIPPING OPTIONS. AT CLOSE OF AUCTION Ending Auction amount +Shipping =Total Email for additional payment instructions Payment options PAYPAL from Verified paypal accounts with confirmed shipping ... moreaddresses. WE SHIP ONLY to CONFIRMED SHIPPING ADDRESSES. Out of U.S. Payment options PAYPAL Payments shipping to a CONFIRMED shipping address(different then verified) Paypal can not confirm shipping addresses in all countrys so if you cannot provide a confirmed shipping address. Your Paypal payment may be refunded and you will be asked to pay using another method. Shipping We ship all of our items out within 2 business days of confirmed payment. Paypal USERS: WE SHIP ONLY to CONFIRMED SHIPPING ADDRESSES. Shipping to PO Boxes Go USPS Standard 8-10 estimated transit time. Priority shipping costs may be additional. Please email for quotes. Outside U.S. Shipping Additional shipping charges do apply. Please email for shipment quote. All out of U.S. shipments ship USPS. Shipping Policy We report Actual sold price on USPS forms. Buyer is responsible for any/all Custom Fees. Warranty We do not offer any warrantys on our items unless otherwise noted in description. We do not accept any As-is products for return. DOA/30 day Warranty DOA(Dead on arrival) Items MUST be reported DOA from 7 days after receipt. 30 day warranty Items MUST be reported Defective from 30 days after receipt.
Lot of Zymark Rapidtrace SPE Workstation 50000 R/A And Caliper 50000/19
Lot of Zymark Rapidtrace SPE Workstation 50000 R/A And Caliper 50000/19 You are bidding on(8) Zymark SPE Workstation 50000 R/A and(1) Caliper 50000/19 Workstation. All items are in working condition and comes with a 14 Day money back guarantee! These items will be shipped out UPS Service within 2 business days of winning auction. Please contact me if you have any questions regarding this item.
YAMAHA CONTROL PENDANT MODEL # TPB
YAMAHA CONTROL PENDANT MODEL# TPB. EXCELLENT CONDITION WITH MINOR WARE ON BACK. GUARANTEED TO WORK OR MONEY BACK IF RETURNED WITHIN FOURTEEN DAYS.
Permobil Motorized Seat Elevator For Electric Wheelchair
Tested and working I wont go into if you are looking at this you know what you are looking for
Yaskawa Electric Circuit Board JANCD-1021 Rev A0 _ JANCD1021 _ DF8202440
Our internal inventory number on this product is 15T# BM2-28A Click here To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! Note: This Item was pulled from a working machine. It is being sold in good working condition unless otherwise stated. The item in the pictures may not be the item you will receive, since we have Multiple Quantities of this unit. This is just a rep. of what you will be receiving. Description: It is a Yaskawa Electric Circuit Board. Model Number: JANCD-1021 Rev A0 JANCD1021 JANCD-1O21 JANCD1O21 Serial Number: E010-164 Additional Number: DF8202440 App. Weight: 2 lbs Dimensions: ... more16.5" x 6.25" x 1.25" Cosmetic Condition Rating: 4-Good Note: This is solely a cosmetic description of the item. This part was pulled from a working machine and is being sold in good working condition unless otherwise stated! 1) Very Poor 2) Poor 3) Fair 4) Good 5) Like New Condition*NOTE* Free Shipping& Handling to lower 48 states via our choice of ground carrier. All Expedited Domestic Shipments pay $10.00 Boxing/ Handling/ Processing Plus shipping costs from zip 49534! All International Shipments pay $15.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS Internationa
Scorbot ER4U Robotic Arm Robot
This is a Scorbot ER4U Robotic Arm used in the educational industry. This unit was pulled from a working enviroment and had very little use. The teacher that was hired to teach the class quit. The equipment sat idle until it was pulled. I do not have the knowledge to test however so this is an AS- IS sale- What you see in the pictures is the exact item for sale in the auction. I will palletize and prepare for shipping- Buyer is responsible for arranging pickup and for shipping costs.Seller assumes no responsibilty for shipping or freight damage- Buyer is responsible for shipping insurance. I have other robotic arms and several controllers as well as CNC equipment that will be going up for auction shortly. This auction is for the robotic arm only. The controller will be listed in another auction. Powered by The free listing tool. List your ... moreitems fast and easy and manage your active items.
Scorbot ER V PLUS Robotic Arm Robot
This is a Scorbot ER V PLUS Robotic Arm used in the educational industry. This unit was pulled from a working enviroment and had very little use. The teacher that was hired to teach the class quit. The equipment sat idle until it was pulled. I do not have the knowledge to test however so this is an AS- IS sale- What you see in the pictures is the exact item for sale in the auction. I will palletize and prepare for shipping- Buyer is responsible for arranging pickup and for shipping costs.Seller assumes no responsibilty for shipping or freight damage- Buyer is responsible for shipping insurance. I have other robotic arms and several controllers as well as CNC equipment that will be going up for auction shortly. This auction is for the robotic arm only. The controller will be listed in another auction. Powered by The free listing tool. List ... moreyour items fast and easy and manage your active items.
Sphero S002
Used 1 Time: Sphero is the first robotic ball you control with a tilt. Touch or swing from your smartphone or tablet. Roll it, race it, or challenge yourself with Drive, Golf, and more. Your experience changes with every new app- and more are always in the works. No matter how you play, Sphero will always surprise you. Sphero's Vitals Made For: Requires iOS 40 or greater. Andrior devices with OS Includes Sphero Robotic Ball Inductive charging base and adapter Applications and games available through iTunes and Android Marketplace gosphero.com.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e950ea39d-0x104-
Bosch Antistatisch Conveyor Pallet
Bosch Antistatisch Conveyor Pallet Appears Used.Sold As Is Shipping Weight: 20Lbs Shipping Dimensions: 12" 12" 12" Box Check out my! Sale Details: Condition: AS-IS Only items pictured are included- If a part is not pictured. Or mentioned in the description, then it is not included in the sale. Location visits by appointment only. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us if payment cannot be made within seven days. Payment arrangements can be made. We accept: PayPal and Bank Wire Transfers in USD or Canadian Funds Canadian Customers are subject to 5% GST or Applicable HST on Shipping and Material SHIPPING DETAILS: All items will be securely packaged and shipped via the best and most economical way possible. All tracking information will be forwarded to the email address associated with ... moreyour PayPal or eBay account. Canadian Shipping· Items up to 65Lbs are shipped Canada Post. 65Lbs- 150Lbs are shipped UPS, Over 150Lbs are Shipped via Freight Carrier· If the customer wants to handle shipping arrangements. Please provide us with your shipping information and account number. Canadian Customers are subject to 5% GST or Applicable HST on Shipping and Material Expedited Shipping Services are available for an extra cost US Shipping· Items up to 65Lbs are shipped Canada Post. 65Lbs- 150Lbs are shipped UPS, Over 150Lbs are Shipped via Freight Carrier· If the customer wants to handle shipping arrangements. Please provide us with your shipping information and account number. Customer is responsible for any applicable incoming duties or taxes Expedited Shipping Services are available for an extra cost INTERNATIONAL SHIPPING· Items up to 65Lbs are shipped Canada Post. 65Lbs- 150Lbs are shipped UPS, Over 150Lbs are Shipped via Freight Carrier· If the customer wants to handle shipping arrangements. Please provide us with your shipping information and account number. International Orders are subject to applicable DUTIES. TAXES or other Import Fees
Fanuc A16B-3200-0412 /08A Main CPU Board
Fanuc main cpu board in excellent condition. Removed from a running robot. Tested great! Battery is included but condition is unknown. See pics for all details Cosmetic condition is excellent! Very clean board ready for your install. Thanks for looking. Posted with
USED Fanuc EE-1063-101 Accu-Flow Counter Unit
For sale a used Fanuc Accu-Flow Counter Unit. Assy# EE-1063-101 Board# EE-1063-101-001
Newport 861 Motion Controller Handheld Open-Loop CMA Actuator Motor Drive 860
Search our eBay Store! Newport 861 Motion Controller Handheld Open-Loop CMA Actuator Motor Drive 860 SKU: JV-MAT-B-861NEWPORT Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Newport 861 Motion Controller Handheld Open-Loop CMA Actuator Motor Drive 860 Model: 861 Motion Controller Physical Condition: Good. Unit has minimal scuffs and scratches and shows signs of use. Power and motor cables are not included. We do not have the necessary resources in our facilities to properly test this unit. Dimensions(L"W"H" 9*6*6 Please visit the following link for product information(For Informational ... morePurposes Only) PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units list
Genmark Automation Gencobot GB4S 300mm Wafer Handler Transfer Robot 4S0101027
Search our eBay Store! Genmark Automation Gencobot GB4S 300mm Wafer Handler Transfer Robot 4S0101027 SKU: JV-HAN-C-4S0101027 Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Genmark Automation Gencobot GB4S 300mm Wafer Handler Transfer Robot 4S0101027. BEING SOLD AS-IS FOR PARTS OR REPAIR. Model: GB4S. P/N: 4S0101027. Wafer Size: up to 300mm. Arm Configuration: 5.25”5.25” End Effectors Type: Not included. Body Diameter: 9.76” Body Height: 13.6” Physical Condition: Good– Unit has some scuffs/scratch marks on body. Arms are taped together. Functionality/Degree of Testing: ... moreArm rotates smoothly. We do not have the necessary resources to further test this unit. Cables are not included. Overall Dimensions(L" x W" x H" 12 x 11-1/4 x 18. BEING SOLD AS-IS FOR PARTS OR REPAIR. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in
Brooks Automation 8020EKR2-1-BU-TRUST Teach Pendant Robot Controller Module
Search our eBay Store! Brooks Automation 8020EKR2-1-BU-TRUST Teach Pendant Robot Controller Module SKU: JV-MAT-B-BROOKSTRUST Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Brooks Automation 8020EKR2-1-BU-TRUST Teach Pendant Robot Controller Module Model: 8020EKR2-1-BU-TRUST Physical Condition: Good. Unit has some minor scuffs. Scratches, and signs of use. Power cable is not included. We do not have the necessary resources in our facilities to properly test this unit. Dimensions(L"W"H" 7*4*1 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT ... moreAUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfied
EPSON E2C351/12 SCARA ROBOT W/ EPSON VISION SYSTEM/CAM! Epson Recertified!
Complete SCARA Robot System with Vision! Previously used only as a sales demo unit. Like NEW excellent condition and easy to work with. Purchased for R&D project August 2011. Was fully checked and re-certified by Epson(CA) before use. Has only been used for 2 weeks since. Please contact us at if you have any questions or would like to see a demo. RETAILS 22K + USD! Comes with Epson E2C351/12 SCARA Robot/ Epson vision system with camera Items included in package are: Model: E32C351S‐ UL Controller: RC420 Controller Software: RC+ V4.1.1 Mount: Table Top Camera: Camera is Sony CCD. Model number XC‐ 75. This is not a smart camera. Processing is done within the controller itself. Camera lenses included are 8.5m 25mm. And 35mm lenses Robot E‐ stop switch included. All cables to operate vision included. All robot power cables included. All customer ... moreneeds is screen, keyboard, and mouse to interact with robot. Buyer pays shipping. E2C351 Specifications The EC351 Robots are four axis units with high torque AC servo motors for reduced maintenance and harmonic drives for increased speed and repeatability. Robots come in four models: E2C351S(standard configuration) E2C351SM(standard multi-mount configuration) E2C351C(class 10 cleanroom configuration) And the E. 10 cleanroom multi-mount configuration) The E2C351 robots have a horizontal reach of 350mm and a Z Axis vertical stroke of 120mm. E2C351 robots have a standard( Back) cycle time of 0.417 seconds and a repeatability of 0.010mm(0.0004 in. With numbers like these. The E2C351 robots are also one of the fastest most repeatable. Available with a better price/performance/space ratio than any competitive units. Robot Model E2C351S/E2C351SM. E2C351C/E2C351CM) Configuration SCARA 4 Axis AC Servo. Maximum Payload 3 KG. Robot Model E2C351S/E2C351SM(E2C351C/E2C351CM) Configuration SCARA 4 Axis AC Servo Maximum Payload 3 KG Axis Range T1+T2 Z U 350mm 120mm(100mm clean) +/ 360 Speed T1+T2(combined) Z U 3600 mm/s 1100 mm/s 2600 deg/s Repeatability T1+T2 Z U +
ABB S3 TEACH PENDANT - REPAIRED
ABB S3 TEACH PENDANT- REPAIRED- OLD STOCK GUARANTEED TO WORK OR MONEY BACK IF RETURNED WITHIN FOURTEEN DAYS.
Brooks Frog Legs Wafer Mover Control Board
Hi and thanks for taking a closer look at this item. This is a very hard to find Brooks Associates Frog Legs control board. It is in like new condition. The jumpers on the solder side are factory installed. I was a the Control Systems Engineer for the same company for twenty years and acquired many of these control elements as part of a mock-up or a development system and at that point of time were functional. $1125. Powered by The free listing tool. List your items fast and easy and manage your active items.
MEDAR WELDING CONTROL 78502 VME BUS
MEDAR WELDING CONTROL VME BUS. 78502 Condition: Excellent Tested& guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e950ea499-0xff-
KAWASAKI CONTROL TEACH PENDANT MODEL 50817-1035
KAWASAKI CONTROL TEACH PENDANT MODEL 50817-1035- REPAIRED. GUARANTEED TO WORK OR MONEY BACK IF RETURNED WITHIN FOURTEEN DAYS.
Motoman I/O cable set 150039-2 150036-2 150038-1 $800 retail HP series DX100
Brand new in box Retails for $863 Motomaton i/o cable set for an HP series arm. DX Controller 150039-2 cable pigtail for IO to 3BC 150036-2 cable assy. Upper arm cable, arm to J box 150038-1 cable assy. Robot base IO to 3BC Posted with Check out my other listings! Happy Bidding
Adept dual B5 amp 10338-00190 technology automation robot
Pulled from a spare working system. Like new. Posted with Check out my other listings! Happy Bidding.
Applied Robotics emergency quick stop QS-71-NP-T3M robot automation
Pulled from working unit Posted with Check out my other listings! Happy Bidding.
SEIKO EPSON SCARA EC351S ROBOT WITH SRC-200 CONTROLER
SEIKO EPSON SCARA EC351S ROBOT WITH SRC-200 CONTROLER SEIKO EPSON SCARA EC351S ROBOT WITH SRC-200 CONTROLER. THE ROBOT WAS USED IN AN R&D LAB AND WAS WORKING WHEN REMOVED. I HAVE NOT TESTED IT BECAUSE I DO NOT KNOW HOW TO. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE ROBOT WHAT IS INCLUDED AND THE CONDITION. IT WILL SHIP FREIGHT SO PLEASE EMAIL ME YOU ZIP CODE IF IT IS GOING TO A HOUSE OR BUSINESS AND IF YOU WILL NEED A LIFTGATE TRUCK FOR DELIVERY.
Yamaha YK180X high precision industrial laboratory SCARA robot and controller
Very fast· Accuracy and repeatability 0.1mm across its workspace· Highly programmable from teach pendant or by software· Responds to external commands via RS232 or digital interface· 180cm work space radius This is one of the most capable robot and controllers available. If you have a project where compact size and exceptional control capability are important. Or if you are teaching a course in robotics, then I highly recommend this robot. Alternatively if you have a small laboratory or manufacturing/assembly application. Then this is the machine for you. It is flexible and easily programmed. Yet is capable of the most sophisticated actions such as palletizing and moving to absolute positions not previously taught. It can perform slow complex movements with linear or circular interpolation for laying beads of sealant. ... moreOr pick-and-place and high speed assembly movements with equal ease. I am selling the robot. Controller and manual teach box together, although they are normally bought separately. This will allow you to put the machine into operation in the shortest time. Although it operates on 220Vac. I have an up-converter transformer which enables it to operate from 115Vac. I will include the transformer free upon request. I bought this robot to develop a new method of handling and dispensing high value liquids. My company Archivex LLC won a grant from the National Institute of Health to develop this technology and to build two prototype machines. Of which the robot was the centerpiece. The project is now completed and I am closing the company and disposing of its assets. I will put the second similar robot on eBay later. I chose the Yamaha robot from many other contenders because of its great control flexibility. Its speed and its precision. In my application I needed to control it by a RS232 command stream from an external computer. Which the controller supports. If you do not have this requirement. Then there are three other ways of controlling it: either by external digital signals, or t
Brooks Automation Controller w. (1) Tec-3000 EC Board - Unique Product!
Brooks Automation Controller w. 1) Tec-3000 EC Board No Cords Included Great Deal! Unique Product! Act Fast Subject to prior sale! Photos show everything that is included. For more information. Or to contact us, please feel free to visit our ME page. 14 day Right of Return if not satisfied. Thanks for looking! Please visit our store for more great items! 6646
SCHMIDT STYLINER STYLUS MARKER CONTROL UNIT
SCHMIDT STYLINER STYLUS MARKER CONTROL UNIT REMOVED FROM WORKING EQUIPMENT GUARANTEED TO WORK OR MONEY BACK IF RETURNED WITHIN FOURTEEN DAYS
Norgren VMS 2110 Smart Vacuum Pump, Mod# VMS-2110-120, Used, WARRANTY
Title: Norgren VMS 2110 Smart Vacuum Pump. Mod# VMS-2110-120, Used Description: Our Internal Stock# J42-1(5-9-13 dale) You are about to purchase the following item: 1- Norgren VMS 2110 Smart Vacuum Pump. Mod# VMS-2110-120, Used Model# VMS-2110-120 120 VAC This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 day return privilege on this item if found defective(freight prepaid by buyer) We will either replace item or refund money if found inoperable. Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers ... morelocation; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. All items that are bought and payed for before 4 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege on this item if found defective(freight prepaid by buyer) We will either replace item or refund money if found inoperable. Customer satisfaction is our main goal. If you ar
ROBOT (SHIBAURA) No.CRA-203 w/CONTROLLER (NO PENDANT)
ROBOT(SHIBAURA) No.CRA-203 w/CONTROLLER(NO PENDANT) UNIT COMES WITH CONTROLLER BUT NO PENDANT OR CABLES ROBOT CONDITION IS VERY GOOD WITH A FEW SCRAPES AND SCRATCHES CONTROLLER HAS A DENT ON COVER(DOES NOT EFFECT FUNCTIONALITY) AXIS 2 MAY BE UNBOLTED FOR SHIPPING SATISFACTION GUARANTEED OR MONEY BACK IF RETURNED WITHIN FOURTEEN DAYS
Fanuc M16i RJ3
Robot is very low hours.Very clean and is in great working condition.
HAS COMPO ARM No. HAS-2Y350A-0 ROBOT AXIS 125WATT MOTOR
HAS COMPO ARM No. HAS-2Y350A-0 ROBOT AXIS 125WATT MOTOR-USED- EXCELLENT CONDITION(NO VISIBLE WEAR) OUTSIDE CASE HAS A FEW MINOR NICKS AND SCRATCHES FROM BEING STORED WITH OTHER EQUIPMENT SEE PICTURES#4. 5& 6 FOR FURTHER INFORMATION GUARANTEED TO WORK OR MONEY BACK IF RETURNED WITHIN FOURTEEN DAYS
Basler A631F Gigabit Ethernet CCD GigE Vision Automation Camera
Basler A631F Gigabit Ethernet CCD GigE Vision Automation Camera
DSQC 540 Main Computer 3HAC 14279-1/01
DSQC 540 Main Computer Model 3HAC 14279-01/01 This Items is used. It is in good condition. It has not been repair. Tested It was removed from a working robot. For more information please contact us Will ship internationally with FEDEX only. Please contact for shipping cost. WARRANTY After receiving the item there is a 14 day period for claims. After 14 days there will be no refunds. In case of physical damage no warranty Power burned item void warranty Shipping International: After you have purchased an item on a eBay please wait until we send over an updated invoice through eBay which reflects the correct shipping charges before paying as this will ensure that you are not over charged for shipping
Genmark Gencobot 4/3L Classic Wafer Handler Transfer 3-Link Robot Arm PARTS
Search our eBay Store! Genmark Gencobot 4/3L Classic Wafer Handler Transfer 3-Link Robot Arm PARTS SKU: JV-NIC-HANFERT Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Genmark Automation Gencobot 4/3L Classic Wafer Handler Transfer 3-Link Robot Arm*PARTS* Type: 4/3L Classic. Physical Condition: Good; Minor scuffs/scratches. Unit has some marks/stains on its plastic display cover(SEE PHOTOS) Power cable is not included. We do not have the necessary resources to further test this unit. Dimensions(L" x W" x H" 14 3/16* 15 ¾* 29 3/8. Extended Arm Length: ... more30 ¼” BEING SOLD AS-IS FOR PARTS OR REPAIR. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don&
Fanuc Arcmate 100iB With RJ3iB Welding Robot Arc mate Clean Tested Video
Fanuc Arcmate 100iB Robot with RJ3iB Control, Excellent Welding robot*Low Hours* Tested& Ready To Weld Exclusive Weld Package comes with" F anuc Arc Mate 100iB Welding Robot. RJ3iB Control, Welding torch. Wire Feeder, cables, Color i Pendant(Teach Pendant) Lincoln Power source Invertec™ STT II& STT-10 Power Feed" Manual included*Available in Multiple Quantity* We Skid& Load for FREE Fanuc ArcMate 100iB/6S Robot Specifications Axes: 6, Payload: 6 kg, H-Reach: 1373 mm, Repeatability: ±0.08 mm, Robot Mass: 135 kg, Structure: Articulated Short Arm, Mounting: floor. Ceiling, angle, wall, Application Arc Welding, Laser Welding, Mig/Tig Welding, Plasma Cutting, If you have any questions regarding these robot/ technical details or shipping quotes please contact us Universal Robotic Inc 3303 Garden Brook Dr Farmers Branch. ... moreTexas 75234-2310 Contact Email: Tel: 972-488-1200 Fax: 972-488-1201 Terms;As is where is- Pictures are for reference only Actual item may look bit different. Extra accessories wires and cables will not be provided.
CRS FRIDGE Refrigerated Lab 120-Microplate Carousel w/SAC Single Axis Controller
Search our eBay Store! CRS FRIDGE Refrigerated Lab 120-Microplate Carousel w/SAC Single Axis Controller SKU: JV-RYA-C-CRSROBO Condition: Used Packaging: Pallet/Skid Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 CRS Automation Solutions Refrigerated Lab 120-Microplate Carousel w/SAC Single Axis Controller PLEASE NOTE: THE REFRIGERATION SYSTEM IS NOT COMPLETE. THERE IS A CONDENSER& FAN ASSEMBLY INSTALLED ABOVE THE CAROUSEL(SEE PHOTOS) THE CAROUSEL CONSISTS OF 8-COLUMNS WITH 15 TRAYS PER COLUMN. System Model: FRIDGE. 115VAC/2A 24VDC/200mA Controller Model: SAC Input: 120/240VAC; 100VA; 50/60Hz Output: 24VDC; 4A ... morePhysical Condition: Good. Minor scuffs& scratches. 3 out of 4 of the adjustable feet stabilizers are missing. The remaining stabilizer feet is very bent. The carousel. Condenser and fan are in excellent condition. Main unit powers on with working condenser fan. The SAC controller also powers on. We do not have the necessary resources in our facility to test this unit. Power cable is not included. Dimensions: L" W" H" 26* 33* 38 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the de
Novellus ATM Robot Interface Control Board 03-296428
Search our eBay Store! Novellus ATM Robot Interface Control Board 03-296428 SKU: JV-SER-B-NOVATM Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Novellus ATM Robot Interface Auction Includes: Novellus ATM Robot Interface Motion Control Board Fab No: 26-296428-00 Rev 2 Assy No: 03-296428-00 Rev A Physical Condition: Used; In Good Physical Condition(See Photos) Working Condition/ Degree of Testing: Functionality is Untested. We do not have the facilities or knowledge to fully test the unit. Unit Dimensions(LxWxH) 9” x 4” x 2” PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT ... moreREQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory update
Adept MV-8 Robot Controller Chassis Power Supply+030/SIO Modules PA-4 AdeptOne
Search our eBay Store! Adept MV-8 Robot Controller Chassis Power Supply+030/SIO Modules PA-4 AdeptOne SKU: JV-ANT-C-ADEPTMV8 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Adept Technology MV-8 Robot Controller Chassis Power Supply+030/SIO Modules For Use With Adept PA-4 and AdeptOne/AdeptThree Robot Model: MV-8 P/N: 30330-12000 Voltage: 100-120 V | 5.0 A | 50/60 HZ- 200-240 V | 2.5 A | 50/60 Hz Auction includes: 1x Adept MV-8 Main unit Chassis/Power Supply 1x Adept 030 Module P/N: 10332-31150 1x Adept SIO Module P/N: 10330-12350 Physical Condition: Good. Minor scratches/scuffs present on unit. ... moreOne of the removable panels present on unit is missing faceplates. This is purely a cosmetic defect. Other minor signs of previous use present on unit. We do not have the necessary resources in our facility to test this unit. For more information about this product. Please visit the following link(for informational purposes only) AdeptOne Instruction Handbook) Adept MV Users Guide) Dimensions(L" W" H" 14.5*8.5*19 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you
DURA-GRIP 3 FINGER PRECISION AIR GRIPPER GH-300
SquareTrade © AP6.0 DURA-GRIP 3 FINGER PRECISION AIR GRIPPER GH-300 This is a Like new Dura-Grip Angular Motion 3 Finger Precision Air Gripper Assembly. Model# GH-300. Features 3 finger angular gripping head Standard Grip Force@ 100 psi[7 bar] 145 lbf Standard Stroke 5° per finger(10° total) Cylinder Bore Diameter 1.187 in Max Force F Static- 150 lbf Max Moment Static Mx. Mz- 200 lbf-in Failsafe Toggle Mechanism- Fingers lock at closed position and will not release until air is supplied again. Mechanism produces synchronous finger motion. 2 1/2" Diameter Body Black anodized finish-GRIP units are ruggedly constructed with a minimum of moving parts. Utility tapped holes permit mounting the unit from the side. These same holes can be used to mount"stripper" devices too. For more Information see: http:www.rimfg.com/catalog/DURA-GRIP%20Angular%20Grippers_r2.pdf ... moreThese units are ideal for the transfer of products during assembly or pick and place operations. I will fully guarantee this great unit. Shipping in the Continental US is $7.90- I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
NICE SEIKO EPSON EC SERIES 4AXIS SCARA ROBOT EC251S
NICE SEIKO EPSON EC SERIES 4AXIS SCARA ROBOT EC251S You are bidding on a NICE SEIKO EPSON EC SERIES 4AXIS SCARA ROBOT EC251S. Retail cost of more than $14.995.00. This is a very nice unit in like new condition and it is fully guaranteed. DOES NOT COME WITH CONTROLLER The EC251S Robot is a four axis unit with AC servo motors for reduced maintenance and harmonic drives for increased speed and reliability. Configuration- SCARA 4 Axis AC Servo Maximum Payload- 3KG Cycle Time(1" x 12" x 1" and back) 0.43 seconds Moment of Inertia(U Axis 5Kg Payload) 0.01 Kg*m2 User Lines- 15 Electric. 3 Pneumatic, Hollow Quill Clean Rating- Class 10(EC251C) 0.13um particle size The EC251S has a horizontal reach of 250mm(hence the name EC251S) and a Z Axis vertical stroke of 120mm. The EC251S robot also has a standard(1" x 12" x 1" ... moreand back) cycle time of 0.43 seconds and a repeatability of 0.010mm For more information: Very competitive Shipping rates for our always welcomed International bidders Shipping and handling is $79.90 within the Continental USA. We always combine shipping to give you the lowest cost. Contact us with any questions at 1-800-826-3433(9-5pm Est) Please visit our other listings on eBay! Powered by
2 ROBOHAND ANGULAR TOGGLE CAM LOCK AIR GRIPPER RA-5 - 2 AVAILABLE
SquareTrade © AP6.0 2 ROBOHAND ANGULAR TOGGLE CAM LOCK AIR GRIPPER RA-5- 2 AVAILABLE This is a Fixed Auction for up to 2 Robohand Precision RA-Lock- Toggle Locking Angular Air Grippers. Model# RA-5. PLEASE NOTE: Each Bid is for ONE Gripper. This style gripper is widely used in the industry and is a rugged design that supplies very high grip force for its size. It's simplified drive mechanism make these grippers an excellent value. Failsafe mechanical locking mechanism High grip force-to-size ratio Rugged design The body has hard-coat anodize 60 RC with Teflon® impregnation Bodies have slip fit dowel holes for accurate location of unit to mounting surface Specifications: Total Rated Grip Force F@ 100 psi. 7 bar 20 lbs. Stroke. 15° of stroke for each finger Open Stroke Adjustment. 15° of stroke for each finger Weight. ... more0.25 lbs. Pressure Range. 40-100 psi 3-7 bar Cylinder Bore Ø. 813 in. Displacement. 0.130 in3 Temperature Range Actuation. 0.10 sec. Accuracy. ±0.005 in. Repeatability. ±0.003 in. These units are ideal for the transfer of products during assembly or pick and place operations. For more information see: http:www.destaco.com/doc/ds/USA/ENG/RACAM.pdf I will fully guarantee this great new unit. Shipping in the Continental US is $4.90- I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
DURA-GRIP 2 FINGER PRECISION AIR GRIPPER GH-2000
SquareTrade © AP6.0 DURA-GRIP 2 FINGER PRECISION AIR GRIPPER GH-2000 This is a Heavy Duty Dura-Grip Angular Motion 2 Finger Precision Air Gripper Assembly. Model# GH-2000. Features two finger angular gripping head Standard Grip Force@ 100 psi[7 bar] 287 lbf Standard Stroke 5° per finger(10° total) Cylinder Bore Diameter 1.750 in Actuation Time(no load) 0.30 sec Failsafe Toggle Mechanism- Fingers lock at closed position and will not release until air is supplied again. Mechanism produces synchronous finger motion. 4" Diameter Body Black anodized finish-GRIP units are ruggedly constructed with a minimum of moving parts. Utility tapped holes permit mounting the unit from the side. These same holes can be used to mount"stripper" devices too. For more Information see: http:www.rimfg.com/catalog/DURA-GRIP%20Angular%20Grippers_r2.pdf ... moreThese units are ideal for the transfer of products during assembly or pick and place operations. I will fully guarantee this great new unit. Shipping in the Continental US is $9.90- I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
UP TO 2 PHD 2 FINGER HEAVY-DUTY AIR GRIPPERS GRC251-2-2001
SquareTrade © AP6.0 UP TO 2 PHD 2 FINGER HEAVY-DUTY AIR GRIPPERS GRC251-2-2001 This is an Auction for up to 2 PHD 2 Finger Shurgrip 2" Stroke Parallel Air Gripper. Model# GRC251-2-2001. PLEASE NOTE: Each bid is for ONE Gripper. Features: Full mounting Corrosion Resistant SHURGRIP. Raised Jaw 2.00(50 mm) Bore Hall Effect Switch Ready(For Series 5360 Switches) Grip force- 383 lbs. at 87 psi 2" Stroke •High grip force to weight ratio for efficient use of space and power. •True parallel jaw travel with no arcing motion for easy tooling design •Double-acting for either internal or external gripping applications. •Close tolerance jaw mechanism eliminates jaw play. Use of dowel pin holes and/or male keys provide precise positioning of tooling. •Rugged jaw and body construction can withstand high impact and shock loads. •Internal jaw ... moremechanism is constructed of hardened steel components and is enclosed for a minimum life of 10 million trouble-free cycles. Dimensions- 2 5/8" Wide x 4 1/4" High x 7 3/8" Long For more information see: http:litstore.phdinc.com/pdf.asp?filename=GRC.pdf#Dimensions This assembly can be used many ways including a pick and place system. I will fully guarantee this great unit. Shipping in the Continental US is $13.90- I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
ADEPT TECHNOLOGY ROBOT CONTROLLER MODEL 310 SOLD AS IS
SquareTrade © AP6.0 ADEPT TECHNOLOGY ROBOT CONTROLLER MODEL 310 SOLD AS IS You are bidding on an Adept Robot Controller. Model: 310. This controller is being sold AS IS and would be great for parts for an exsisting unit. Only 5765 Hours High speed. Reliable, light-payload assembly, handling, and packaging applications. Includes all of the items seen in photos We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery. Any questions? Email us at Dock@dockhardware.com or call 1-800-826-3433 9 to 5 EST. NO RESERVE Please click here to see my other auctions. Powered by
ARTHUR RUSSELL UNIPLACE DP-2F
SquareTrade © AP6.0 ARTHUR RUSSELL UNIPLACE DP-2F You are bidding on a Like New Arthur G. Russell UniPlace Pick Up Head. Model DP-2F. The AGR Pneumatic Pick-Up Head has been designed to meet performance requirements of high-speed assembly machines and to mount on the tool holder of the UNIPLACE® Pick-and-Place Mechanism. It can also be used with other mechanisms. Compact configuration has been combined with lightweight alloys in the body to achieve low mass. Pick-up arms are drilled for mounting of pick-up fingers or other devices. Return springs can be installed on either side of the piston for either normally open or normally closed operation. For extremely high-speed operation we recommend double-action operation from a four-way valve. The AGR Pneumatic Pick-Up Head has the advantage of fast. Positive and highly dependable operation, ... morerequiring little or no adjustment or maintenance. With properly designed tooling. It will take care of the great majority of pick-up and placement requirements. It is also useful for light clamping applications and for carrying funnel jaws to facilitate assembly operations. The DP 2 can be mounted on an A. G. Russell Breakaway Head. This mounting feature permits the Pick-Up Head to"break" from its mounting if a lateral impediment is met. The steel dove tail design provides accurate mounting and easy reassembly if disconnection occurs. The unit can be used in many other applications where compliance is necessary in tool mounting. For more information see: http:www.arthurgrussell.com/offtheshelf.shtml I will fully guarantee this very precision Unit. Shipping in the Continental US is $4.90- I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ea22d9008-0xfe-
VERY NICE FANUC 4 AXIS A-510 SCARA ROBOT W/ RH CONTROL
SquareTrade © AP6.0 VERY NICE FANUC 4 AXIS A-510 SCARA ROBOT W/ RH CONTROL Prev Stop Play Next VERY NICE FANUC 4 AXIS A-510 SCARA ROBOT W/ RH CONTROL You are bidding on a Fanuc SCARA Robot. Model: A-510 with Controller. This is a very nice Robot in great condition and it is fully guaranteed. 4 Axis 44 lb Payload 36" Horizontal Reach 0.002" Repeatabilty Axis 1: 11.8" Axis 2: 300 Degrees Axis 3: 300 Degrees Axis 4: 540 Degrees We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery.
IAI RCP2-SS8R-I-56P-5-200-P1-RO3-B-MR robo cylinder slider type.
For Sale. IAI RCP2-SS8R-I-56P-5-200-P1-RO3-B-MR slider type cylinder with controller. This unit is in good clean working condition. Please ask any questions before committing to buy.
IAI RCP3-SA3R-I-28P-4-200-P1-S-ML
For Sale. RCP3-SA3R-I-28P-4-200-P1-S-ML robo cylinder with controller. Cylinder and controller are in clean and good working condition. But the cord connection to the motor is loose. And will snap on and off easy. Please ask any questions before committting to buy.
IAI RCP2-SA6R-I-42P-6-300-P1-R03-B-ML
For Sale. RCP2-SA6R-I-42P-6-300-P1-R03-B-ML robo cylinder with controller. Cylinder and controller are in clean and good working condition. Please ask any questions before committting to buy.
Dynamics Research Corporation LB2A-0004-CC-L10XXBO Linear Encoder
This auction is for one excellent condition Dynamics Research Corporation LB2A-0004-CC-L10XXBO Enclosed linear semi-guided encoder. These have 4.625” of total travel. So they have 4” of measurement travel. They have 10’ integral cables terminated with a male. 25-pin D-SUB type connector(only 9 pins are present) These are dated 05/94. 08/94 or 09/94. They measure approximately 8.9” long overall and the mounting slots on the body are 8 7/16” apart. The slots measure 0.218” wide x 0.47” long. The head mounting slots measure 0.163” wide x 0.275” long. These came in a lot of spare parts so they have some light cosmetic marks on the body. But all the mounting surfaces, gaskets& connectors are unharmed. The cables may have some cosmetic marks/tiny pokes but nothing that has harmed the wires inside. These are also clean. GENERAL ITEM DETAILS: ... moreThe picture shown is the actual item(s) being sold and everything that is included is shown or listed in the ad. All items are sold"as-is" with no express or implied warranty. Furthermore. The buyer agrees to indemnify the seller against any and all lawsuits, damages, claims, awards, settlements and expenses incident thereto from any actual or alleged loss, injury or damage to the buyer, any persons, any property or any business connected with, or resulting from the use of the goods sold hereunder, either alone or in combination with other products, components, or equipment. All sales are final unless we make a mistake describing the item so please email us with any questions before purchasing. Our prices reflect the fact that you are buying surplus. Just like we purchased it-without a warranty. PAYMENT TERMS: We only accept payment in the forms listed in the ad. Payment must be received in 10 business days after we send you your total-unless we specifically make other arrangements. SHIPPING DETAILS: We do NOT ship outside the U.S. or directly to military base addresses. The shipping costs listed are the best option within the Continental U.S. using USPS PRIORITY w/del
YASKAWA YASNAC SERVO BOARD JANCD SR21 1 JANCD-SR21-1 JANCDSR211 DF8202904-A1 ^^
Check out my! YASKAWA YASNAC CIRCUIT BOARD TYPE: JANCD-SR21-1 DF8202904-A1 THIS IS IN GREAT WORKING CONDITION. REMOVED IT FROM MAZAK VTC-41 CNC MILL. PLEASE CHECK OUT THE PICTURE OF THE MACHINE THAT WE REMOVED IT FROM DOWN BELOW. Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 14 DAY EXCHANGE WARRANTY Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the ... moreequipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. FREE GROUND SHIPPING TO ALL 48 CONTINENTAL U.S. STATES. EXPEDITED SHIPPING IS AVAILABLE FOR AN EXTRA CHARGE. PLEASE CALL 818 899-9000. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US THOUGH E-BAY. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as w
FANUC CIRCUIT BOARD A20B-0007-0090 .04B A20B00070090 A20B 0007 0090 04B *M*
Check out my! FANUC CIRCUIT BOARD TYPE: A20B 0007 0090(INVENTORY LOT#3) THIS IS IN GREAT WORKING CONDITION. MIKE Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 30 DAY MONEY BACK MIKE Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending ... morethe payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret
Brooks Automation Reliance Wafer Robot P/N 121655 & 017-0266-01: Installed in FI
You are bidding on a Brooks Automation wafer robot. Installed in a Brooks FabExpress FX3000 atmospheric bridge system. It will be removed in order to ship it. We have two in stock: Part# 121655. Serial# 0607-10425, Model# 017-0266-01. Config. 017-0950-01, build code: 01080101, PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. Our preferred carrier is FedEx. 626-334-0500 1331 Mountain View Circle Azusa. CA 91702 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13ea77467ff-0xf6-
ABB S4C Cabinet Interlock Mechanism
ABB S4C Cabinet Interlock Mechanism. Used. Pulled From A Working Environment. Please contact us if you have any questions concerning this item before bidding. Return Policy: Returns are not accepted for items sold“AS-IS” If the item comes with a warranty. The buyer must contact us within the specified warranty-period to arrange an exchange(if available) or return/refund. Returns are only accepted for warrantied items that are D.O.A. Returned i tems must be returned in the same condition received(no signs of abuse. Misapplied power, disassembled etc. Packaging/Handling/Shipping: All items are packaged appropriately to protect the contents from shipping damage. We do NOT charge a separate handling fee. We do not ship outside of the United States or Canada. Buyers must contact us to make arrangements for items requiring LTL shipment. Feedback: ... moreWe want your experience with us to be pleasant. If we fall short on any aspect of your transaction with us. Please contact us before leaving feedback. We will make every attempt to make things right. Contact Us: 313) 537-9798. 9:00am– 5:00pm(Eastern) M-F. Location: SHELF.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13ea8d011bd-0x105-
HAS COMPO ARM No. HAS-1X280A-0 ROBOT AXIS 200WATT MOTOR
HAS COMPO ARM No. HAS-1X280A-0 ROBOT AXIS 200WATT MOTOR-USED- LIKE NEW CONDITION(NO VISIBLE WEAR) OUTSIDE CASE HAS A FEW MINOR NICKS AND SCRATCHES FROM BEING STORED WITH OTHER EQUIPMENT SEE PICTURES FOR FURTHER INFORMATION GUARANTEED TO WORK OR MONEY BACK IF RETURNED WITHIN FOURTEEN DAYS
Fanuc S-420F Robot with Controller and Pendant, Complete 12 set available
Our listed items of machinery and robots are All Used Items. Complete 12 units of FANUC S-420F welding robots were used as Spot Welding Robots by Japanese NISSAN Motor's factory. We will not check the working condition when shipping all 12 unit. PURCHASING 12 UNITS ALL AT ONCE is the US$3.000* 12units = $36,000 will be the FOB Korean port price and shipped on one 20ft and one 40ft containers. Shipping cost from South Korea to Guayaquil port. Ecuador will cost approximately US$3.000. ROBOT. CONTROLLER, PENDANT OFFERED FEATURES: The Fanuc S420F is a six-axis. 120kg payload, electric servo driven robot. S420F robots are ideal for heavy duty spot welding applications. Possessing a slender p rofile and a large work envelope. The S420F is capable of working in even the most hazardous environments Fanuc S420F Robot Specifications Axis: 6 Payload: ... more120 kg V-Reach: 2731 mm H-Reach: 2413 mm Repeatability: ±0.02 mm Robot Mass: 1600 kg Structure: articulated Mounting: floor(The above is a normal specification of FANUC S-420F) Announcement: on Feb.15. 2013 Please message us before purchasing. Payment Terms: We accept PAYPAL only! Please make sure you have a valid PayPal account before purchasing. Please follow the eBay checkout to complete the payment. Payment is expected within 7 days from the date of purchase. Shipping Terms: Please feel free to contact us for the shipping information. Orders will be shipped out within 5 business days after your payment has COMPLETED or CLEARED. We ship only to CONFIRMED addresses listed on PayPal. If you would like to ship your order to an address different from that on your PayPal account. Please message us before placing your order. Estimated delivery time(excluding weekends or holidays) 1) About 30 to 35 business days to: United States. Canada, 2) About 25 to 35 business days to: Australia. United Kingdom; 3) About 32 to 40 business days to: all other countries. 4) Delivery time is at best estimated but not guaranteed. When B/L(Bill of Lading) issues. We provide all inf
3HAB5956-1 8MB Memory Board DSQC 323 on S4C equipment
ABB 8MB Memory board. DSQC 323; Part#3HAB5956-1 Part was refurbished by ABB. Need more photos. Let me know. Thanks for looking!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.