|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This AMAT Applied Materials 0010-70271 101 Wafer Lift Assembly Core is used working surplus. This Unit is Missing a Screw, does not affect funtcion (see ... morephotos). The physical condition is good, but there are signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Kensington 15-3702-1425-25 300mm Wafer Handling Robot with End Effector Copper is used working surplus. The physical condition is good, but there ... moreare signs of previous use and handling. Copper Cu Exposed.
Buy It Now
Condition: For parts or not working Location: Gilroy, United States "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
$600.00 Shipping Condition: Used Location: Albuquerque, United States This Newport 35-3700-1425-18 300mm Wafer Handling Robot is used untested surplus and is being sold as-is. The physical condition is good, but there are ... moresigns of previous use and handling. Item Condition: Untested, Sold As-Is.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Nabtesco 3D80-000005-V3 is used working surplus. Otherwise the overall physical condition of the unit is good and clean. These products are subject ... moreto export restrictions under U.S. law.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Teijin Seiki 3D80-000005-12 Wafer Handling Robot is used untested surplus and is being sold as-is. The physical condition is good and there are visible ... moresigns of previous use and handling. Item Condition: Untested Surplus, Sold As-Is.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: GENCOBOT 4/3L. This Genmark Automation GENCOBOT 4/3L Wafer Handling Robot is used working surplus. The physical condition is good, but there ... moreare signs of previous use and handling. Serial numbers or country of manufacture may vary.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The unit is missing several screws from the front panel, the lower hold down panels, and a lift handle are slightly bent (see photos). The physical condition ... moreis good and there are visible signs of previous use and handling.
Buy It Now
$700.00 Shipping Condition: Used Location: Albuquerque, United States This Mitsubishi RV-E14NHC-SA06 Wafer Handling Industrial Robot is used untested surplus and is being sold as-is. The robot had a hand written note that ... morestated the unit is missing the J5 motor. The physical condition is good and there are visible signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Removed from a ADE Corporation AWIS 3220 Advanced Wafer Inspection System. This Brooks Automation 002-5177-01 300mm Wafer Handling Robot is used untested ... moresurplus and is being sold as-is. The physical condition is good and there are visible signs of previous use and handling.
Buy It Now
$47.15 Shipping Condition: Used Location: Salt Lake City, United States Nabtesco 3D80-000005-V3 Wafer Handling Robot Arm TEL Tokyo Electron.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Newport Kensington 25-3700-1125-04 Wafer Handling Robot is used working surplus. Includes the Waist, Arm, and Z-Axis interface cables. The physical ... morecondition is good, but there are signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. Part No: 5026a. Serial numbers or country of manufacture may vary.
Buy It Now
Condition: Seller refurbished Location: Beaverton, United States Semiconductor Wafer Handling Repair Services. Direct Repair Laboratories (DRL) repairs and extends the life of advanced automation machinery.
Buy It Now
$65.00 Shipping Condition: Used Location: Menlo Park, United States
Buy It Now
Condition: For parts or not working Location: Saint Paul, United States Radial 14" (I think??). Pulled from a decommissioned assembly. However, we lack the experience or peripherals to test this in any way. Sold as is for ... moreparts/repair. Z - 450 mm/s. R - 1,000 mm/s. T - 360°/s.
Buy It Now
Free Shipping Condition: For parts or not working Location: Albuquerque, United States This Hirata AR-WL180CL-3-S-300-D1 Wafer Handling 3-Axis Robot is used untested surplus and is being sold as-is. The unit has a hand written note stating ... morethe robot has a "bad z-axis". The physical condition is good, but there are signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. This item is being sold As-Is. These products are subject to export ... morerestrictions under U.S. law. Condition: Untested, Sold As-Is.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Albuquerque, United States Model No: GencoBot 3. This Genmark Automation GB3 Wafer Handling Robot is manufacturer refurbished surplus. The unit includes test report and floppy disc. ... moreThe physical condition is good, but there may be signs of previous use and handling.
Buy It Now
Free Shipping Condition: For parts or not working Location: Albuquerque, United States This Genmark Automation GB Series Wafer Handling Robot is used untested surplus and is being sold as-is. The robot does not have a part number plate, ... morehas scuff marks on the arms, and the wafer blade is slightly bent (see photos).
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States AMAT Applied Materials Part No: 0190-22248. This Newport 35-3700-1425-18 Wafer Handling Robot is used working surplus. The physical condition is good, ... morebut there are signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. Part No: SCE92100137. These products are subject to export restrictions ... moreunder U.S. law. Serial numbers or country of manufacture may vary.
Buy It Now
Free Shipping Condition: For parts or not working Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. This item is being sold As-Is. Condition: Untested, Sold As-Is. These ... moreproducts are subject to export restrictions under U.S. law.
Buy It Now
Free Shipping Condition: For parts or not working Location: Albuquerque, United States This Brooks Automation 017-0484-01 Wafer Handling Robot Reliance is used untested surplus and is being sold as-is. The unit has scuffs and dents to the ... moreouter body covers, the center cable support is broken, and the center shaft is loose (see photos).
Buy It Now
Free Shipping Condition: For parts or not working Location: Albuquerque, United States This Sinfonia BX80-000180-V1 Dual Arm Wafer Handling Robot with Missing Covers is used untested surplus and is being sold as-is. The physical condition ... moreis good, but there are signs of previous use and handling.
Buy It Now
$1000.00 Shipping Condition: Used Location: 용인시, South Korea Search our eBay Store! Genmark Automation Gencobot IV 4/3L 3LA Wafer Handling Transfer Robot PARTS SKU: JV-MAR-C-GENCOBOT Condition: For parts or not ... moreworking Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Genmark Automation Gencobot IV 4/3L Wafer Handling Transfer Robot*FOR PARTS OR REPAIR* Model: 4/3 L Physical Condition: Good; Minor scratches. Arm joints move correctly. We do not have the necessary resources to further test this unit. Dimensions(L" x W" x H" 11*11*32 BEING SOLD AS-IS FOR PARTS OR REPAIR. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissat
Buy It Now
$79.77 Shipping Condition: For parts or not working Location: Goleta, United States Genmark Automation E0219 Wafer Handling Robot PARTS (7393)R For parts. In good cosmetic condition. Has a few minor scuff marks. Taken from a working environment. ... moreUnable to test. See pictures for more detail. Manufacturer: Genmark Automation Model #/ Model: E0219 Diameter: 13" Total height: 16" Full Arm Length: 24" Total Weight: 65 lbs.
Buy It Now
Free Shipping Condition: For parts or not working Location: Albuquerque, United States This Brooks Automation 002-0000r02 is used untested surplus. The units internal connector board is missing screws. The exterior covers are scuffed and ... moremissing screws (see photos). The physical condition is fair, but there are signs of previous use and handling.
Buy It Now
Condition: Used Location: Buda, United States SN: 000687. Five-one-two-nine-two-eight-five-five-five-three Corporate Office. Two-zero-eight-nine-eight-two-one-eight-six-two Direct Line. Nicole Jackson ... moreat getsparesllc. (See Hours of Operation, above).
Buy It Now
$550.00 Shipping Condition: For parts or not working Location: Israel If we have made a mistake we do apologize, we are only human.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Newport 15-3702-1425-25 300mm Wafer Robot Kensington AMAT 0190-22248 Endura is used working surplus. The physical condition is good, but there are ... moresigns of previous use and handling. Removed from a AMAT Applied Materials 300mm Endura PVD Physical Vapor Deposition System.
Buy It Now
Condition: Used Location: Albuquerque, United States This Kawasaki 3NT420B-B029 300mm Dual Blade Wafer Transfer Robot is used untested surplus and is being sold as-is. The physical condition is fair, but ... morethere are signs of previous use and handling. Serial numbers or country of manufacture may vary.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Brooks Automation 017-0950-01 is used working surplus. Includes 200mm FEI CLM-3D end effector. The physical condition is good, but there are signs ... moreof previous use and handling. Model No: Reliance Series.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. Part No: C4000.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Removed from a Raytex RXP-1200 300mm Wafer Pinhole Inspection System. This Raytex RXP-1200 300mm End Effector Wafer Inspection System Lot of 2 is used ... moreworking surplus. The physical condition is good, but there are signs of previous use and handling.
Buy It Now
Condition: For parts or not working Location: Eden Prairie, United States F6 = Like New (Appendix C – Test and Repair). All functions tested and verified working through software tests. Repaired with OEM original parts. Software ... moretest results are available. Zero defects.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Hitachi Wafer Handling Robot I-900SRT Defect Inspection Tool is used working surplus. The physical condition is good, but there are signs of previous ... moreuse and handling. Model No: Wafer Handling Robot.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Yaskawa Electric XU-RC350D-C51 Dual Arm Wafer Handling Robot Lot of 2 is used working surplus. The robots are missing various covers, have dents ... moreto the arms & panels, and do not include end effectors (see photos).
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Removed from a Raytex RXP-1200 300mm Wafer Pinhole Inspection System. This Rorze RA210-C12-001 300mm Wafer Aligner is used working surplus. The physical ... morecondition is good, but there are signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Kawasaki 50976-2142 Wafer Handling Robot Interface Cable 8' is used working surplus. The physical condition is good, but there are signs of previous ... moreuse and handling. These products are subject to export restrictions under U.S. law.
Buy It Now
Condition: Used Location: Albuquerque, United States Part No: PR300Z Robot Assembly. The physical condition is good, but there are signs of previous use and handling. Serial numbers or country of manufacture ... moremay vary.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. Part No: OF101. Made in Japan.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Kensington 25-3700-1425-08 Wafer Robot AMAT Applied Materials Centura Ultima X is used working surplus. The unit has minor scuffs to the body (see ... morephotos). The physical condition is good, but there are signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. Serial numbers or country of manufacture may vary. Installed Components.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. This item is being sold As-Is. These products are subject to export ... morerestrictions under U.S. law.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. This item is being sold As-Is. These products are subject to export ... morerestrictions under U.S. law.
Buy It Now
$380.00 Shipping Condition: Used Location: San Jose, United States Qty1: Brooks Automation 017-0950-01 200mm Wafer Handling Robot. Item is warranted to be as specified in the above details, and in good working order (unless ... morestated that it's condition is unknown). No software are included with any systems.
Buy It Now
Condition: For parts or not working Location: Gilroy, United States "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. However, I have ... moreno way of powering it up or testing it, and it is being sold as-is.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Hitachi CR-712T-A Wafer Handling Clean Robot is used working surplus. The physical condition is good, but there are signs of previous use and handling. ... moreModel No: CLEAN ROBOT. Removed from a Hitachi M-712E Shallow Trench Etcher System.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Kawasaki 50976-2142L01 Wafer Handling Robot Interface Cable 8 Foot Dual End Used is used working surplus. The physical condition is good, but there ... moreare signs of previous use and handling. These products are subject to export restrictions under U.S. law.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Model No: MTR5 MultiTran 5. This Brooks Automation 001-7600-07 MTR5 Wafer Transfer Robot is used working surplus. The physical condition is good, but ... morethere are signs of previous use and handling. Part No: 001-7600-07.
Buy It Now
$25.03 Shipping Condition: Used Location: Moultrie, United States Unit is in good overall condition, removed from Wafer Edge Exposure System. UNIT IS IN WORKING CONDITION BUT DOES NOT INCLUDE ANY OTHER S-CUBED WAFER ... moreEDGE EXPOSURE SYSTEM COMPONENTS. Will there be a loading dock or forklift?.
Buy It Now
Condition: Used Location: Leander, United States SCARA 4-axis robot arm. (1) Owens Design 35170-503 Vacuum Paddle End Effector. (1) Owens Design Normalizer End Effector with (2) 65X.800 hands. Model ... moreTP1 Teach Pendant. Designed for use in ISO class 3 cleanroom.
Buy It Now
Free Shipping Condition: For parts or not working Location: Albuquerque, United States This Brooks Automation 017-0266-01 Wafer Handling Robot Reliance 017-0950-01 is used untested surplus and is being sold as-is. The physical condition ... moreis good, but there are signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States AMAT Applied Materials Part No: AMAT 0190-19124. This Newport 15-3701-1425-25 is used working surplus. The physical condition is good, but there are signs ... moreof previous use and handling. These products are subject to export restrictions under U.S. law.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Model No: Clean Robot. This Hitachi CR-712VC is used working surplus. The physical condition is good, but there are signs of previous use and handling. ... moreThese products are subject to export restrictions under U.S. law.
Buy It Now
Condition: Used Location: Leander, United States SCARA 4-axis robot arm. Interchangeable end effectors: 200mm wafer vacuum chuck and wafer normalizer. (1) Owens Design 35170-502 Vacuum Paddle End Effector. ... more(1) Owens Design Normalizer End Effector with (2) 65X.800 hands.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Hitachi CR-712V Wafer Handling Clean Robot is used working surplus. The physical condition is good, but there are signs of previous use and handling. ... moreModel No: Clean Robot. Removed from a Hitachi M-712E Shallow Trench Etcher System.
Buy It Now
Free Shipping Condition: For parts or not working Location: Albuquerque, United States This AMAT Applied Materials 0010-76000 P5000 4", 5", 6" Wafer Robot Body is used untested surplus and is being sold as-is. The physical condition is good, ... morebut there are signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Industrial Robot Automation 4" 100mm Wafer Transfer Robot Platform is used untested surplus and is being sold as-is. Industrial Robot Automation ... moreDual 8" 200mm Wafer Transfer Robot Platform Spare The physical condition is good and there are visible signs of previous use and handling.
|
|
|
|
C100061 Integrated Dynamics Engineering IDE Wafer Handling Robot (0125-3715-04)
C100061 Integrated Dynamics Engineering IDE Wafer Handling Robot(0125-3715-04) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C100061 This Integrated Dynamics Engineering(IDE) Wafer Handling Robot(p/n 0125-3715-04 Rev. 3; s/n 2172R0503; date: 05/30/03) looks to be in good cosmetic condition. Showing some minor signs of wear. However, I have no way of powering it up or testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 15"L x 11"W x 28"H. P54. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping ... moreand handling fee of $85.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 51.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to
|
|
|
C100387-P54 Integrated Dynamics Engineering IDE Wafer Handling Robot w/ Cables
C100387-P54 Integrated Dynamics Engineering IDE Wafer Handling Robot w/ Cables(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C100387 This Integrated Dynamics Engineering(IDE) Wafer Handling Robot(p/n 0125-3715-04 Rev. 3; s/n 2194R0603; date: 06/17/03) looks to be in good cosmetic condition. Showing some minor signs of wear. However, I have no way of powering it up or testing it, and it is being sold as-is. It comes with a pair of cables, as shown. Approximate overall unpacked dimensions: 18"L x 17"W x 29"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. ... moreBuyer pays a fixed shipping and handling fee of $97.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 54.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax
|
|
|
C100061-P54 Integrated Dynamics Engineering IDE Wafer Handling Robot
C100061-P54 Integrated Dynamics Engineering IDE Wafer Handling Robot Â(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge)  Product ID# C100061 This Integrated Dynamics Engineering(IDE) Wafer Handling Robot(p/n 0125-3715-04 Rev. 3; s/n 2172R0503; date: 05/30/03) looks to be in good cosmetic condition. Showing some minor signs of wear. However, I have no way of powering it up or testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 15"L x 11"W x 28"H. P54. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.  All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below  Shipping. Buyer ... morepays a fixed shipping and handling fee of $85.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 51.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.   We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY.  We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only.  We accept credit card payments through confirmed/verified Paypal accounts only.  California Sales Tax For all California ship-to locati
|
|
|
G75505 Rorze Dual Arm Wafer Handling Robot & Controller
G75505 Rorze Dual Arm Wafer Handling Robot& Controller(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# G75505 This Rorze Dual Arm Wafer Handling Robot. Model RR721L202H-H30-ICA-3& Rorze CURR-2292-1 Robot Controller, appear to be in good cosmetic condition, although there are a few small dings, scratches, signs of previous use. The robot is missing one of the rotator motors(inside one of the arms) and will need to have it replaced. The unit comes with the three cables shown. The robot stands approximately 30” inches tall. Please look at the photos, and ask questions if you have them. I do not have the equipment or training to formally test this set so it is being sold as is. Due to the size/weight of this item. Freight shipping ... morearrangements will be required. Freight Shipments: Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this timeframe, the rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 289.00 Pounds Buyer pays freight plus a fixed handling fee of $25.08(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift
|
|
|
Hitachi Kokusai Wafer Handling Robot Arm Module TJ3CXR-00288A Vertron
Hitachi Kokusai Wafer Handling Robot Module TJ3CXR-00288A Vertron Includes Igus Cable carriers and wires shown. We have 7 units available. Actuator in background not included. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping via Fedex Ground lower 48 USA. AK. HI, PR to pay actual shipping. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee_gsrx_vers_523(GS 6.6.3(523)
|
|
|
C97096 Isel Robotik 10-21-0015_7200-M001 Wafer Handling Robot (Newly Upgraded)
C97096 Isel Robotik 10-21-0015_7200-M001 Wafer Handling Robot(Newly Upgraded) Click to Enlarge) Product ID# C97096 This Isel Robotik 10-21-0015_7200-M001 Wafer Handling Robot was pulled from a clean-room environment. And it is in good working condition. We had it upgraded with the newest version of Isel software, and it has been factory sealed in an Isel box by Isel personnel(the first two pics above were taken before we sent the unit off to Isel for the upgrade) Approximate packed dimenions: 41"L x 25"W x 25"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee ... moreof $185.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 85.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out
|
|
|
Hine Design Asyst Crossing Automation 04300-071 Automated Wafer Handling Robot
Hine Design Asyst Crossing Automation 04300-071 Automated Wafer Handling Robot w/End Affector This robot has no identifying tag. So I'm guessing at the part number based on a web page here that has a very similar looking unit. It has a few scuffs from handling/storage. We do not know the history and have no idea whether it is new. Refurbished, used, broken. We have no way to test it. That is why we're listing it as a parts machine. Might be a replacement unit for a tool that was never used. Might need a rebuild. If there is a simple way to test it, let us know. Terms of Sale Buyer pays $98 shipping(continental US) HI. AK, PR and Canada pay $198 shipping. Paypal usually ships within 24 hours. Shipping includes special blocking and packing to avoid strain on the arm/affector. Other. International(non-Canadian) bidders PLEASE contact ... moreus before bidding. Thanks for your interest. Please email with any questions. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13ffe551541-0xf1-
|
|
|
L93968 Kensington Carousel-2 Wafer Handling Robot
L93968 Kensington Carousel-2 Wafer Handling Robot(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# L93968 You are looking at a Kensington Wafer Handling Robot. Model# Carousel-2. It appears to be in good cosmetic condition showing signs of previous use. Please refer to the pictures for more detail. It was removed from a wafer inspection station. The arms move very smooth without any type of binding or sticking. Unfortunately I do not have any way of actually testing out this item and it is being sold untested as is. Please note that this does not came with any other parts, cables, or accessories. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. ... moreSee additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $110.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 62.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal.com or BidPay.com) All auctioned products are sold as advertised. As is and without warranty. PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County,
|
|
|
Asyst AXYS 21 Wafer Handling Robot w/ Controller BioCel 1800
ASYST AXYS 21 WAFER HANDLING ROBOT W/ BioCell 1800 Controller and Environmental Controller Switch Box Used units. Excellent condition, all these pulled from a robot cabinet system, untested, sell as is, 1) ASYST Wafer Handling Robot. PN:12000-058, 1) BioCel 1800 Controller(1) Environmental Controller Box, Please look over on the 10 photos, Local pick up OK. Used Unit. NOTE: THIS UNIT WAS REMOVED FROM COMPANY. UNTESTED, SOLD AS IS. Warranty This system untested. Sold as is, no warranty, no return,
|
|
|
Genmark Automation Gencobot 4/3L Wafer Handler Transfer Robot Handling Robotic
Search our eBay Store! Genmark Automation Gencobot 4/3L Wafer Handler Transfer Robot Handling Robotic SKU: JV-SAM-C-TOBOCNEG Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Genmark Automation Gencobot 4/3L Wafer Handler Transfer Robot Model: Gencobot 4/3L. Physical Condition: Good. Unit has scuffs. Scratches, and residual adhesive from prolonged use and handling. All connectors appear to be intact. Arm unit of robot has residual adhesive and is scuffed. Main body has scuffs and scratches(refer to photos) Functionality/Degree of Testing: We do not have the necessary resources to properly ... moretest this unit. Power cable. Accessories, and peripherals are not included. Dimensions(D"x H" 12 x 29-1/4. Arm Extended Length: Approx. 19” THE FDA DISCLAIMER BELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please
|
|
|
Kawasaki Heavy Industries Robotic Division 3NS005S-L001 Wafer Handling Robot
This looks to be an unused spare. Ive listed as used since I can not prove it isnt.
|
|
|
Axcelis Air Wafer Transfer Handling Arm Robot 2006 Part # 11029370
New Hampshire Tax Free! NH 03087 Axcelis Air Wafer Transfer Handling Arm Robot 2006, Up for sale is this Axcelis Air Wafer Transfer Robot. It is a 2006 model. This has been in storage. It has been tested, refurbished and working. This is a 3 axis wafer transport robot. With precision ball screw, linear slides& dc servo motors with 500 line encoders. This is for(belongs in) a GSD-200E Axcelis Eaton Ion Implanter(worth $700.000) This will be professionally packaged to insure safe delivery. Payment: Payment is via PayPal. You must have a confirmed PayPal Address. Payment must be received within 2 days of the close of auction. Shipping: Packages are usually shipped the same or following business day. Combined Shipping is available! We do not accept your DHL. FedEx or UPS account number for shipping. Shipping costs for all orders can be determined ... moreby the shipping calculator in this auction. All orders are shipped via UPS ground or USPS Priority to AK. HI& PR. Insurance is required. International buyers, please include your telephone number for customs requirements. Be aware that you may incur a brokerage and/or customs duty& tax upon delivery. Shipping is: Standard UPS(ground) or USPS priority to Canada. EMS(only) to all other international destinations. Assist With Auctions Windham. NH Telephone: 978-687-7330. Returns: Item must be returned within three days. Returns are accepted ONLY if description is inaccurate& must be returned in the same condition as received. Always please contact us first! Refunds are less packing& shipping. About Us: We are an eBay Registered Drop Off Location! Drop off your stuff and we'll sell it for you on eBay! Perhaps it’s a fine painting or an antique in the attic… it could be an unused guitar or a set of golf clubs in the basement… or even some car wheels or yard tools in the garage. Maybe it’s time to convert your valuables into cash! Legal: Assist With Auctions is not the owner or seller of these goods. But merely a bailee acting on behalf of the seller to fac
|
|
|
Genmark Automation Gencobot 4/3L Wafer Handling Robot Untested As-Is
This Genmark Automation Gencobot 4/3L is used untested surplus. The physical condition is good. But there are signs of previous use and handling. This item is being sold As-Is. Part No: Gencobot 4/3L End Effector Part No: EF-EJ-02-C-B Sold As-Is Made in USA Condition: Untested. Sold As-Is Estimated Packed Shipping Dimensions: L x W x H = 18"x18"x38" 110 lbs. Requires Freight Shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, date or country of manufacture is not necessarily ... morethe one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 14 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the
|
|
|
Genmark Automation Gencobot 4/3L Wafer Handling Robot Damaged Untested
This Genmark Gencobot 4/3L is used untested surplus. The physical condition is rough and there are signs of previous use and handling. Unit has several dents. This item is being sold As-Is. Part No: Gencobot 4/3L Sold As-Is Made in USA Condition: Untested. Sold As-Is Estimated Packed Shipping Dimensions: L x W x H = 18"x18"x38" 110 lbs. Requires Freight Shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, date or country of manufacture is not necessarily the one that will ... morebe sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 14 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best and most economic
|
|
|
Equipe Technologies ATM-4298 Wafer Handling Robot Untested
This Equipe Technologies ATM-4298 is used untested surplus. The physical condition is good. But there are signs of previous use and handling. Unit is missing end effector. This item is being sold As-Is. Part No: ATM-4298 No End Effector Sold As-Is Made in USA Condition: Untested. Sold As-Is Estimated Packed Shipping Dimensions: L x W x H = 18"x18"x28" 26 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, date or country of manufacture is not necessarily the one that will be ... moresent. 90-Day Satisfaction Guarantee(See Details Below) Lister 14 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best and most economical
|
|
|
KENSINGTON LABORATORIES/NEWPORT WAFER HANDLING ROBOT WFH4Cm.TT/LR
KENSINGTON LABORATORIES/ NEWPORT WAFER HANDLING ROBOT WFH4Cm. TT/LR 00-343-48 EMP Newport Extends to 17” top to bottom"AS-IS" EXCELLENT CONDITION Guaranteed to be not-DOA Photos: Please be sure to carefully review all provided photos. Stated Item Condition: Items indicated as“NEW” are guaranteed to be in good working order and cosmetically free of any major scratches and/or flaws. Items marked"AS-IS" are used or refurbished items that we are unable to fully test or guarantee for all functionality and specifications. We do our best to describe the cosmetic condition, and if possible indicate if the item power's-on. We offer a 14 day guarantee that the item is not-DOA. Shipping: We try our best to provide fair shipping& handling prices. We have stated the shipping& handling cost for transactions within the U.S. ... moreWe ship via USPS Priority Mail or FedEx Ground depending on which is the most efficient for cost and delivery time. If overnight shipping is needed. We always do our best to accommodate your needs, please contact us. All items are securely packaged for safe arrival. Before you pay, please be sure to check your PayPal delivery address for accuracy. For International transactions. Buyer pays shipping& handling costs as quoted. Please contact us through the"ask a question" link at the bottom of the page to get a shipping& handling cost quote prior to buying/bidding to avoid any confusion or surprises. All customs forms will be filled out accurately. International buyers are responsible for all applicable import duties. Taxes and fees. FREIGHT Shipments: Shipping to be arranged and paid for by buyer via Freight. International buyers please note we work exclusively with your Freight Forwarder. All system components and accessories will be crated/boxed. Please contact us and we will provide the product location. Weight, measurements and any special shipping instructions required. Payment: Payment must be made within 5 days of purchase commitment. If unable to make
|
|
|
ASYST 12000-002 Wafer Handling Robot w/ ASYST Robot Control, ASYST Power + More
ASYST WAFER HANDLING ROBOT Descriptions Used system. Very good condition, these system auction from a company closed out but I don't have the capabilities for testing this system and system sell as is. Please look over in the 10 photos for more detail. 1) ASYST Wafer Handling Robot. Model 12000-002(1) ASYST Robot Control. Model 05050-014(1) ASYST Power Distribution Center. Assembly# 9700-6209-01(1) ASYST Robot Pendant Controller. Model 8045R2-1 Many Cables, Local pick up Used Unit. picture shown. Warranty This system untested. Sold as is, no warranty, no return Payment Paypal, Cashier check Personal/Company check(Note: Personal/company check will be held 5-8 business days for clearance. If you preferred to pay by credit credit(VISA/MC) Please register with Paypal; for their FREE online payment service. 8.75% sales tax will be applied ... moreif you are a California resident. Shipping& Handling Buyer pick up. If you want to ship this system, please contract with the seller Canada. Alaska and Hawaii pay actual shipping cost Terms Payments must be received within 7 business days after our confirmation was sent to all winning bidder. Contact Business Hour: Monday- Friday 9:00am- 6:00pm PST
|
|
|
C107971 Genmark Automation Gencobot 4/3L Wafer Handling Robot
Click to Enlarge) Product ID# C107971 This Genmark Automation Gencobot 4/3L Wafer Handling Robot looks to be in good cosmetic condition. Showing some minor signs of wear. However, I do not have the controller for it, so I have no way of powering it up or testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 15"L x 12"W x 31"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 103 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) ... morewill be quoted based on winning bidders shipping address. The unpacked weight of this item is 60 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County, the current basic state tax rate applies. Orders will be placed on hold for non-payment of taxes.
|
|
|
C107980 Genmark Automation Wafer Handling Robot & Prealigner Combination
Click to Enlarge) Product ID# C107980 This Genmark Automation Wafer Handling Robot& Prealigner Combination looks to be in good cosmetic condition. Showing some minor signs of wear. However, I do not have the controller for it, so I have no way of powering it up or testing it, and it is being sold as-is. It comes with a pair of cables, as shown in the last photo above. Approximate overall unpacked dimensions: 23"L x 12"W x 13"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 62 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii ... moreand Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 44 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County, the current basic state tax rate applies. Orders will be pla
|
|
|
C108320 Kensington Laboratories Single 4 Link Wafer Handling Robot w/ Cables
Click to Enlarge) Product ID# C108320 This Kensington Laboratories model"Single 4 Link" Wafer Handling Robot looks to be in good cosmetic condition. Showing some signs of wear. However, I do not have a controller for it, so I have no way of powering it up or testing it, and it is being sold as-is. It comes with four cables, as shown. Approximate overall unpacked dimensions: 13"L x 13"W x 22"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 108 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international ... moreshipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 65 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California and Texas Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County, the current basic state tax rate applies. For all Texas orders, the rate of 8.
|
|
|
C108321 Cybeq 6100 Wafer Handling Robot & 2850/6100 Controller
Click to Enlarge) Product ID# C108321 This lot includes a Cybeq 6100 Wafer Handling Robot and 2850/6100 Controller mounted to a rolling table. As shown. These items look to be in good cosmetic condition, showing some signs of wear. The controller powers up, and the fan comes on, and the digital display is bright and clear. The robot mechanics seem to move smoothly when moved by hand. However, I do not have the cables to connect the robot to the controller, so I have no way of testing these items any further. They are being sold as-is. They can be shipped without the table, if so desired. Approximate overall unpacked dimensions: 39"L x 30"W x 38"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless ... moreotherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 286 pounds Buyer pays freight plus a fixed handling fee of 20 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We rese
|
|
|
Equipe PRI ESC-200 Atmospheric Wafer Handling Robot Arm Controller, ESC200
Manufacturer: Equipe, Model: ESC-200, Notes: Missing screws. Has some cosmetic scuffs and scratches. Sold as-is. As pictured. Includes no additional accessories beyond what is pictured. If you need any further information about this item. Please ask any questions prior to purchase. ims.27514 loc.15-g g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14595a430dd-0x108-
|
|
|
Yaskawa XU-RCM6841 Wafer Handling Robot AMAT 0190-14738 Used Working
This Yaskawa XU-RCM6841 Wafer Handling Robot is used working surplus. End Effector is not included. The physical condition is good. But there are signs of previous use and handling. Part No: XU-RCM6841 AMAT No: 0190-14738. Rev. 003 Made in Japan Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 20"x20"x38" 140 lbs. Requires Freight Shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, date or country of manufacture is not necessarily ... morethe one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 0/strong Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via t
|
|
|
Kawasaki 3NT520C-A001 Dual Arm Wafer Handling Robot As-Is
This Kawasaki 3NT520C-A001 Dual Arm Wafer Handling Robot is used untested surplus. A pneumatic port on the upper body is loose. The physical condition is good. But there are signs of previous use and handling. This item is being sold As-Is. Robot Part No: 3NT520C-A001 Made in Japan Condition: Untested. Sold As-Is Estimated Packed Shipping Dimensions: L x W x H = 30"x36"x50" 165 lbs. Requires Freight Shipping. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, date or country of ... moremanufacture is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 13 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palle
|
|
|
Brooks PRI DBM2407-V2 Wafer Handling Robot Dual Arm and Controller EDC 2400
Brooks PRI DBM2407-V2 Wafer Handling Robot pn:6-0002-1085-SP DBM Robots Arm Link 17.3" 7" with Controller EDC 2400(sealed) pn:6-0001-0351-SP and 3 pc. Controller/ Robot cable all tested and working condition(see pictures Eqt32) Information used. This unit is tested and was used for development not in production all shipped items are shown in the pictures(w/o Laser Unit. Price Please feel free to set an appropriate offer. Shipment Shipment cost depend on the location. Please ask the price for services and insurance. The unit will be shipped within 2-3 business days via confirmed delivery Service(UPS/ DHL. Delivery time depends on the confirmed Service. Return Policy The item will be inspect before shipment with care and will be framed in a protection-box In case you found a defect on the unit. We will refund after return. The return-charge ... moreis up to you Be aware. You will have to pay tax and/ or VAT depending on the destination If you have a question or problem please let me know
|
|
|
Kawasaki 3SX920B-A002 High-Z 300mm Wafer Handling Robot AMAT 0190-25512
Questions? Call us: 1-877-328-9236. Kawasaki 3SX920B-A002 High-Z 300mm Wafer Handling Robot AMAT 0190-25512. Manufacturer: Kawasaki Model: 3SX920B-A002 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Kawasaki Condition: Used. This has been in warehouse storage for several years. Aside from a few scratches in the metal. It looks like this robot may never have been used- we are not sure, so we are billing it as"used. Notes: We are not able to fully test this robot. The vertical axis does not move when the shipping bracket is removed; we think there is a holding brake set. The axes move easily with hand pressure when the brackets are off. No further testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Kawasaki High-Z Wafer Robot, ... moreSpecifications: Manufacturer: Kawasaki Robot Division, Type: 3SX920B-A002, Applied Materials P/N 0190-25512 HIGH-Z ROBOT PAIR AND ROBO, 300mm High-Z semiconductor wafer handling robot, Triple-jointed X/Y positioning arm, Long-travel linear Z azis, 5-hand upper and 1-hand lower rotate on common axis. Move independently, SKU: P06D001 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Orders shipped to Texas will
|
|
 |