|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: United States 3 PC Nema 42 Stepper Motor With 3256 OZ-In Holding Torque,Single shaft. 3 PC Stepper Motor Driver DQ2722M, 110-220VAC, 7.0A, 200 Microstep. It is designed ... morefor use with the 2 phase hybrid stepper motor of all kinds with.
Buy It Now
Free Shipping Condition: New Location: United States 1PC Nema 42 Stepper Motor With 4200 OZ-In Holding Torque,Single shaft. 1PC Stepper Motor Driver DQ2722MA, 110-220VAC, 7.0A, 200 Microstep. It is designed ... morefor use with the 2 phase hybrid stepper motor of all kinds with.
Buy It Now
Free Shipping Condition: New Location: United States It is designed for use with the 2 phase hybrid stepper motor of all kinds with. 1 PC Stepper Motor Driver DQ2722MA, 110-220VAC, 7.0A, 200 Microstep. 1, ... moreStepper Motor Driver DQ2722MA. The highest micro step is 60000ppr.
Buy It Now
$15.48 Shipping Condition: Used Location: Framingham, United States All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work. Only that we have ... morenot tested or checked it out. This may also mean that we are not knowledgeable in this specific item. The Item may vary from picture as manufacture may change model appearance. MHZ ELECTRONICS INC. CALL BRENT- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BRENT- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BRENT- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BRENT- 1-866-MHZ-ELEC- Parker Compumotor S6-Drive S Series Microstep Drive comes with what you see in the pictures. If you don't see it. You probably won’t get it. Specifications are from manufacturer and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. eBay’s description of“USED or FOR PARTS OR NOT WORKING” and our description of“USED or FOR PARTS OR NOT WORKING” is different, therefore because eBay requires the filling in of this field, we state as“USED or FOR PARTS OR NOT WORKING” PLEASE READ OUR“CONDITION” for our description of“USED or FOR PARTS OR NOT WORKING” Model Number: S6-Drive S.O. Number: 87952 Serial Number: Quantity Available(97102100243- Pictured) Electrical Requirements: 120 Volts AC. 50/60 Hz, 1100 vA Current Retail Price: $780.00 Condition: Used. Removed from service General Description: The S Drive is a bipolar. Recirculating, microstepping drive that runs two-phase permanent magnet hybrid step motors. The drive uses MOSFET technology to give high performance in a small package while providing short-circuit protection, brownout protection, over-temperature protection, and a built-in power supply. The S Drive is compatible with all Compumotor indexers. Features: The S Drive requires no external power supply. It uses 120Volts AC directly for its power inputs. Compumotor’s motors are two-phase hybrid motors(permanent magnet type) Four. Six, or eight lead motors may be used, with the internal phases connected for parallel or series operation,
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States Stepper motor driver board with ULN2003. 5PCS ULN2003 Drive Test Module Board. A, B, C, D four-phase LED indicates the status of the stepper motor work. ... moreStepper motor with a standard interface, when used directly pluggable.
Buy It Now
$6.00 Shipping Condition: Used Location: Minneapolis, United States In the center position the motor remains in the holding mode with two phases energized. RESETResets the step counter to zero. DISPLAYSelects either the ... morespeed (step frequency in pulses per second) or step count to be displayed.
Buy It Now
$15.75 Shipping Condition: New Location: Spring Hill, United States These are 4 lead bipolar steppers. Inductance per phase (mH). These can also be used in robotics, and many other applications requiring a great deal of ... moretorque with 3.5A. Step angle. Resistance (Ohms).
Buy It Now
$10.75 Shipping Condition: New Location: Spring Hill, United States Inductance per phase (mH). These can also be used in robotics, and many other applications requiring a great deal of torque with 3.5A. These motors feature ... moredouble (8mm) shafts with flats machined into them for the most durability, and compatibility on the market for retorfits.
Buy It Now
$13.25 Shipping Condition: Used Location: Bosque Farms, United States We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. ... moreIf one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States 1700oz in stepper motor rated at 5A for excellent compatibility with Gecko pro grade drives. It features 1/8 degree, 14mm shaft using 4 leads. Inductance ... moreper phase (mH). These can also be used in robotics, and many other applications requiring a great deal of torque with 5A.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Stepper motor,andone 26Ft. 18AWG 4 lead Double Shielded robotics grade motor cablepre-built with GX-16 5 pin female connectors soldered onto both ends. ... moreStepper Motor Torque For Your Applications. I designed these in house to provide the most torque for large mill conversions, and retrofits.
Buy It Now
$10.75 Shipping Condition: New Location: Spring Hill, United States 18AWG 4 lead Double Shielded robotics grade motor cable pre-built with GX-16 5 pin female connectors soldered onto both ends. Step angle. NEW Pre-built ... moreGX-16 5 Pin 26ft. Here's an overview video on the motor cable.
Buy It Now
$25.00 Shipping Condition: New Location: Spring Hill, United States 18AWG 4 lead Double Shielded robotics grade motor cablepre-built with GX-16 5 pin female connectors soldered onto both ends. Double Shielded 18/4 motor ... morecable which alone is very costly unassembled, andthese motor cables are fully assembled.
Buy It Now
Free Shipping Condition: Used Location: Glendale, United States Featured with 4 optically isolated singled-ended inputs, for sinking or sourcing signal theNI SMD-7615 (Part Number: 783595-01 ) is a Stepper Motion Drive ... moreDevice. These features include electronic damping, torque ripple smoothing, and microstep emulation.
Buy It Now
Free Shipping Condition: New Location: United States 2, Stepper Motor Driver with 4.2A Current, 128 Microstep DQ542MA. It is designed for use with 2-phase hybrid stepper motor of all kinds with. 4.0A phase ... morecurrent. Hording torque when DQ542MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$10.99 Shipping Condition: Used Location: Cleveland, United States ITEM DESCRIPTION SUPERIOR ELECTRIC M062LE09C4006 NEMA 23 STEP MOTOR. 4.6AMPS. NO BOX. SEE PHOTOS. IMPORTANT* We are unable to test any of our electrical ... moreequipment within our warehouse. Items include ONLY what you see in the photo. If you need an accessory that is not pictured-ASK! PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer use your account number with Fedex or UPS for any INTERNATIONAL OVERNIGHT SHIPMENTS. PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, Fife and many HVAC replacement parts. We
Buy It Now
$35.00 Shipping Condition: New Location: Spring Hill, United States 18AWG 4 lead Double Shielded robotics grade motor cables pre-built with GX-16 5 pin female connectors soldered onto both ends. Double Shielded 18/4 motor ... morecable which alone is very costly unassembled, andthese motor cables are fully assembled.
Buy It Now
$25.00 Shipping Condition: New Location: Spring Hill, United States 18AWG 4 lead Double Shielded robotics grade motor cables pre-built with GX-16 5 pin female connectors soldered onto both ends. Double Shielded 18/4 motor ... morecable which alone is very costly unassembled, andthese motor cables are fully assembled.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China [Two control modes] The driver has a position control mode and a speed control mode to meet the usage habits of different customers [200 KHz] The impulse ... moreresponse frequency is up to 200KHz. [LED digital display] The operating panel of the driver is composed of 4 LED digital displays and 4 keys, which are used to display various states of the system and parameter settings. [DSP chip] Adopting a brand-new 32-bit motor control dedicated DSP chip and advanced vector-type closed-loop control technology to ensure stable operation; no step loss; precise positioning; no vibration and fast response. [Multiple protection] This product has protections such as overcurrent, overheating, overvoltage and tracking error tolerance. [Smart Heat Dissipation] The drive base adopts mature spade-tooth heat dis.
Buy It Now
$10.75 Shipping Condition: New Location: Spring Hill, United States 18AWG 4 lead Double Shielded robotics grade motor cable pre-built with GX-16 5 pin female connectors soldered onto both ends. Step angle. NEW Pre-built ... moreGX-16 5 Pin 26ft. Here's an overview video on the motor cable.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China [Two control modes] The driver has a position control mode and a speed control mode to meet the usage habits of different customers [200 KHz] The impulse ... moreresponse frequency is up to 200KHz. [LED digital display] The operating panel of the driver is composed of 4 LED digital displays and 4 keys, which are used to display various states of the system and parameter settings. [DSP chip] Adopting a brand-new 32-bit motor control dedicated DSP chip and advanced vector-type closed-loop control technology to ensure stable operation; no step loss; precise positioning; no vibration and fast response. [Multiple protection] This product has protections such as overcurrent, overheating, overvoltage and tracking error tolerance. [Smart Heat Dissipation] The drive base adopts mature spade-tooth heat dis.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Voltage range: 18~50 VDC maximum peak current: 7A Segmentation scope: 200 ~ 51200ppr Signal input: difference/single-ended, pulse/direction Optical isolation ... moresignal inputting, strong anti-jamming capability Impulse response frequency: 200 KHZ Electricity parameter automatic setting function Closed-loop vector control, high speed and large torque output of motor, meanwhile, guarantee no step to lose Low vibration noise, Over-voltage, over-current, tracking error over proof protection function.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 1. Package Included : 1 x Nema34 8.5NM Closed-loop stepper 1 x Stepper Driver 1 x 3meter Encoder Cable & Power Cable.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Hybrid Servo 12Nm DSP Closed-loop Nema34 Stepper Motor Driver Kit CNC Engraving Package Included : 1 x Closed-loop Stepper Motor 1 x Stepper Driver Applications ... more: Desktop CNC routers, small CNC mills, laser cutters / engravers, dental mills, electronic assembly & inspection equipments, labeling equipments, pick & place machines, X-Y tables, scientific instruments... Especially for short-distance, short-time, fast start-stop and zero-speed stable stop.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 1. Package Included : 1 x Nema34 8.5NM Closed-loop stepper 1 x Stepper Driver 1 x 3meter Encoder Cable & Power Cable.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China [Two control modes] The driver has a position control mode and a speed control mode to meet the usage habits of different customers [200 KHz] The impulse ... moreresponse frequency is up to 200KHz. [LED digital display] The operating panel of the driver is composed of 4 LED digital displays and 4 keys, which are used to display various states of the system and parameter settings. [DSP chip] Adopting a brand-new 32-bit motor control dedicated DSP chip and advanced vector-type closed-loop control technology to ensure stable operation; no step loss; precise positioning; no vibration and fast response. [Multiple protection] This product has protections such as overcurrent, overheating, overvoltage and tracking error tolerance. [Smart Heat Dissipation] The drive base adopts mature spade-tooth heat dis.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 1. Advantage [Two control modes] The driver has a position control mode and a speed control mode to meet the usage habits of different customers [200 ... moreKHz] The impulse response frequency is up to 200KHz. [LED digital display] The operating panel of the driver is composed of 4 LED digital displays and 4 keys, which are used to display various states of the system and parameter settings. [DSP chip] Adopting a brand-new 32-bit motor control dedicated DSP chip and advanced vector-type closed-loop control technology to ensure stable operation; no step loss; precise positioning; no vibration and fast response. [Multiple protection] This product has protections such as overcurrent, overheating, overvoltage and trlerance.
Buy It Now
Free Shipping Condition: New Location: Fort Collins, United States 5x A4988 Stepper motor driver module. This driver module provides five different step resolutions: Full-step, 1/2, 1/4, 1/8 and 1/16 step. Get it faster! ... moreMicrostep resolutions: Full, 1/2, 1/4, 1/8 and 1/16.
Buy It Now
$13.25 Shipping Condition: Used Location: Houston, United States NATIONAL INSTRUMENTS SMD SMD-7611 Step Motor Driver
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 2 pcs Stepper motor driver DM542A ,PEAK current 4.2A, for nema23. 1 pc Nema 34 stepper motor 1600 oz.in 34HS5435C-37B2 single shaft. 2 pcs Nema 23 stepper ... moremotor 425 oz.in 23HS9430 single shaft. Nema 34 stepper motor.
Buy It Now
Free Shipping Condition: Used Location: Malaysia Idle Current Reduction. Output Current Range, Continuous. Output Current. Step Resolution. Status LEDs. Ambient Temperature Range. Legacy Part Number. ... moreUsed: An item that has been used previously.
Buy It Now
Free Shipping Condition: Used Location: Glendale, United States The inputs are opto-isolated with a minimum sourcing of 7 mA per input (5VDC Minimum to 24VDC Maximum). The clock input is set to receive either positive ... moreor negative edge clocks with a maximum frequency of 400kHz.
Buy It Now
$57.99 Shipping Condition: New Location: 龙岗区, China ITEMS DESCRIPTION NEMA34 4.5NM Closed-loop Stepper Motor Hybrid Driver for CNC Laser Router Mill 1. Package Included : 1 x Nema34 4.5NM Closed-loop stepper ... more1 x Stepper Driver 1 x 3meter Encoder Cable & Power Cable.
Buy It Now
$58.08 Shipping Condition: New Location: 龙岗区, China NEMA34 8.5NM Closed-loop Stepper Motor Driver Encoder 6A 2ph Hybrid Servo Kit. 1 x Nema34 8.5NM Closed-loop stepper. Stepper Motor Drive System. 1 x Stepper ... moreDriver. Servo Motor Drive System. CNC Machine Parts.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Multiple Functions: Support automatic, manual, serial port communication control, can control 42/57 two-phase stepping motors directly or with stepping ... moremotor drivers, it is a dedicated operation control module for single-axis stepping motors. A variety of fixed operation modes are built into the module, and the user can quickly select the appropriate motion trajectory 9 Modes: The parameters of each mode can be set in advance, with the use of buttons, it is suitable for almost all occasions, with multiple modes such as forward/reverse/delay/cycle/self-locking/no lock/speed Save Function: distance/speed/delay/cycle times can save the settings after power off. It can run independently as a module or be used with other systems.
Buy It Now
$74.80 Shipping Condition: New Location: 龙岗区, China 1 x Nema34 4.5NM Closed-loop stepper. Stepper Motor & Driver. 1 x Stepper Driver. Servo Motor & Driver. motor with VFD kits, servo motor and servo drive ... morekits, stepper motor and stepper drive kits, ball screw.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Multiple Functions: Support automatic, manual, serial port communication control, can control 42/57 two-phase stepping motors directly or with stepping ... moremotor drivers, it is a dedicated operation control module for single-axis stepping motors. A variety of fixed operation modes are built into the module, and the user can quickly select the appropriate motion trajectory 9 Modes: The parameters of each mode can be set in advance, with the use of buttons, it is suitable for almost all occasions, with multiple modes such as forward/reverse/delay/cycle/self-locking/no lock/speed Save Function: distance/speed/delay/cycle times can save the settings after power off. It can run independently as a module or be used with other systems.
Buy It Now
Free Shipping Condition: New Location: United States Model: DM556. Application: 42/57 stepper motor. Low speed zero vibration, and low noise. 1 Steeper Motor Driver. Bipolar constant current PWM drive output. ... moreIf you do not receive our reply within 48 hours, pls.
Buy It Now
Free Shipping Condition: Used Location: Phoenix, United States Displays signs of normal wear and tear. Model ST10-S.
Buy It Now
$30.00 Shipping Condition: New Location: United States This item includes: 1 PC Nema 23 Stepper Motor dual shaft with 428oz-in holding torque, 1 PC Stepper Driver with 4.2A DQ542MA digital serial replacing ... moreM542, Email： MSN: Skype: happy_saron 1. Stepper Motor Technical Specifications Part No. WT 57STH115-0304B(57BYGH115-003B) Frame Size: NEMA23 Step Angle: 1.8 degree Voltage: 6.3 VDC Current: 3 A/phase Resistance: 2.1 Ohm/phase Inductance: 9 mH/phase Holding torque: 30 Kg-cm 428 oz-in Rotor inertia: 810 g-cm2 Detent torque: 0.89 kg-cm Number of wire leads: 4 Weight: 1.55KG Length: 115 mm Front shaft Diameter: 8mm Rear Shaft Diameter: 6.35mm Front shaft length: 21mm Rear Shaft Length: 15mm Round Shaft 2. Stepper Motor Driver with 4.2A Current, 128 Microstep DQ542MA is a type of two-phase hybrid stepping motor driver. The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DQ542MA run under high speed is also significantly higher than the other two-phase driver. What’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on. Features: l High performance. Low price l Average current control. 2-phase sinusoidal output current drive l Supply voltage from 18VDC to 50VDC l Opto-isolated signal I/O l Overvoltage. Under voltage, overcorrect, phase short circuit protection l 15 channels subdivision and automatic idle-current reduction l 8 channels output phase current setting l Offline command input terminal l Motor torque is related with speed. But not related with step/revolution l High start speed l High hording torque under high speed Electrical specification: Input voltage 18-50VDC Input current ＜ 4A Output current 1.0A ～ 4
Buy It Now
Free Shipping Condition: New Location: United States 【US】 DM556S Stepper Motor Driver 20-50V DC 256 microstep 1-6A for Nema17/23/34 stepper motor. ✹✹ 【 Excellent Performance 】:DM556S Digital stepper motor ... moredriver, Using 32 -bit DSP technology, is mainly suitable for driving NEMA17，NEMA23，NEMA24 series motors, with excellent mid -speed and low -speed performance.
Buy It Now
$49.99 Shipping Condition: New Location: 龙岗区, China 1. Package Included : 1 x Nema34 12.5NM Closed-loop stepper 1 x Stepper Driver 1 x 3meter Encoder Cable & Power Cable.
Buy It Now
Free Shipping Condition: Used Location: Vestal, United States For Sale is a Pacific Scientific Powermax II 1.8 Step Motor P21NRXS-LNS-NS-03. I have no way to fully test it but was pulled out of a working unit. Comes ... morewith a 14-Day Warranty!
Buy It Now
Free Shipping Condition: New – Open box Location: Manning, United States Japan Servo Co. LTD KP56KM2-018 Stepper Motor. Japan Servo Co. LTD.
Buy It Now
Free Shipping Condition: New Location: Houston, United States TMC2209 V4 Two-Phase Stepper Motor Driver 256 Subdivision 3D Printer Motherboard. TMC2209 V4 Driver Module. ◆Microstep setting:2 4 8 16(Can be divided ... moreinto 256 parts). (1)The motor is not easy to lose step, ultra-quiet mode.
Buy It Now
$8.50 Shipping Condition: Used Location: Madison, United States
Buy It Now
$16.05 Shipping Condition: New Location: Elk River, United States
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 1 x Nema34 4.5NM Closed-loop stepper. Stepper Motor & Driver. 1 x Stepper Driver. Servo Motor & Driver. motor with VFD kits, servo motor and servo drive ... morekits, stepper motor and stepper drive kits, ball screw.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 1. Package Included : 1 x Nema34 12.5NM Closed-loop stepper 1 x Stepper Driver 1 x 3meter Encoder Cable & Power Cable 1 x Matched power Supply.
Buy It Now
$16.27 Shipping Condition: Used Location: Leander, United States Output: to 75V, 5A continuous, 7A peak. (1) Copley 800-1543 Step Motor Drive. Drives (1) axis. There are minor blemishes on the drive from prior use. ... moreThe motor cable has been cut. Input: 20-75VDC 8A.
Buy It Now
Free Shipping Condition: New Location: United States Adaptive motor: Stepper motor. Do not dismiss your dream. The distance / speed / delay / number of cycles can be saved and set after power down. It can ... morerun independently as a module, or it can be used together with other systems.
Buy It Now
Free Shipping Condition: New Location: United States It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Suitable for 2-phase and 4-phase motors, ... moreworks well as nema 17 driver, nema 23 driver. 15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States Stepper motor driver board with ULN2003. 5PCS ULN2003 Drive Test Module Board. A, B, C, D four-phase LED indicates the status of the stepper motor work. ... moreStepper motor with a standard interface, when used directly pluggable.
Buy It Now
Free Shipping Condition: Used Location: Rancho Cordova, United States Check out this recently decommissioned item. Rest assured, it is in excellent working condition and is accompanied by a 30-day warranty for your added ... morepeace of mind. Cosmetically, this product maintains its appeal despite the presence of scuffs, scratches, and blemishes from prior use. The package includes all items depicted in the provided pictures. Please be mindful that no additional items or accessories are included unless explicitly shown. It's important to note that a power adapter or cable is not part of the package unless visible in the accompanying images.
Buy It Now
$10.42 Shipping Condition: Used Location: Graham, United States Used - Excellent Condition - 1 Set - Anaheim Automation Stepper Motor 23A-6102A and Anaheim Automation Step Motor Driver MLB500. The item for sale is ... morethe item pictured and described. Coin is not for sale.
Buy It Now
$2.99 Shipping Condition: New Location: China Adaptive motor: Stepper motor. Do not dismiss your dream. The distance / speed / delay / number of cycles can be saved and set after power down. It can ... morerun independently as a module, or it can be used together with other systems.
Buy It Now
$11.70 Shipping Condition: Used Location: Rochester, United States For sale is a Kollmorgen 2 Phase Stepping Motor: CTP12ELF10MAA00 USED. Item appears to have been gently used by previous owner. Item may show slight signs ... moreof wear from previous owner such as shelfwear, scratching, discoloration and/or other markings that will not impact the item's performace.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Johnson Creek, United States Slo-Syn SS2000D6 Superior Electric Stepper Step Motor Driver 6amp
Buy It Now
Free Shipping Condition: New Location: United States 3 PCS Wantai Nema 23 Stepper Motor Dual shaft ,57BYGH115-003B,3A, 428oz-in holding torque. The DQ542MA is an economical microstepping driver based on ... morepatented technology of Wantai Motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors.
Buy It Now
$22.95 Shipping Condition: Used Location: Troy, United States APPLIED MOTION PRODUCTS MODEL 7080 PCB 1000-134C STEP MOTOR DRIVER
|
|
|
|
Parker OS Series OS21B-0DNFLY 1.8 Step Motor Compumotor Division 170 Volts
Parker Step Motor Location: C0805 Manifest Motor Part Number: OS21B-DNFLY Volts: 170 Amps: 1.44 RPM: 1500 Description Here is a Parker OS Series 1.8 stepper motor compumotor division. This was pulled from working equipment and is in excellent cosmetic and working condition. This is guaranteed to arrive not DOA with a 14 day right of return. Shipping Feel free to e-mail me at jrhelicopters@gmail.com if you have any questions. Also. Feel free to call our office anytime at 970-292-8316. I can accept paypal, personal check, or money order. Shipping quotes are available under the shipping tab. We always combine shipping for multiple items purchased. free customisable galleries from
|
|
|
Rorze RD-023MS Selectable Micro Step 2-PH Stepping Motor Driver Terminal Block
Rorze RD-023MS Selectable Micro Step 2-PH Stepping Motor Driver Terminal Block All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. gsrx_vers_476(GS 6.4.4(476)
|
|
|
LOT (5) PMI Synchrostep 00M75XCM3 USS75M DC Step Motor EXCELLENT
LOT(5) PMI Synchrostep 00M75XCM3 USS75M DC Step Motor EXCELLENT FOR SALE: LOT(5) PMI Synchrostep 00M75XCM3 USS75M DC Step Motor EXCELLENT CONDITION: EXCELLENT- LOT(5) PMI Synchrostep 00M75XCM3 USS75M DC Step Motor PMI Motion Technologies Synchrostep. Division Of Kollmorgen Coporation, Commack, N.Y. Made In USA Technical Specifications: 200 Steps/Rev. 100 Oz-In, 80 Watts Parallel: 0.6 Ohms. 2.5 Amps, Series: 2.2 Ohms, 1.25 Amps Items Are In Excellent Condition. Minimal Wear Normal 0 false false false EN-US X-NONE X-NONE For faster processing. Use the"Pay with Credit Card" selection during checkout or call us toll-free at 1-877-237-5248 Auctions include only what is pictured. If it is not pictured or listed. It is NOT included. Rebay Reseller is a resale and pawn shop in Boulder. Colorado and we do not claim to be experts in any one ... morefield nor do we know an item's history unless noted in the auction. All electronics are fully tested and working properly unless otherwise noted AS-IS. There is no return on AS-IS items. Aesthetic/Physical Condition Definitions: New: Brand New. In perfect condition. Mint: Like New condition. Pre-owned Near Mint: Almost mint. Free from any scratches, scuffs, or blemishes. Excellent: Pre-Owned. Minimal signs of wear from normal usage. Very Good: Pre-Owned and may have noticeable scratches. Scuffs, or blemishes. Good: Pre-Owned and may have major marks. Blemishes or scratches. Payment must be received within 4 days of the close of auction. Or a unpaid item case will open. Local pickup is always available and always FREE! See our store hours below or contact us for details. Colorado addresses are required to pay our current local sales tax of 8.16% at the time of checkout. Our standard shipping service is UPS Ground(insured) for large items. And USPS Priority Mail/First Class Mail for smaller items. All listed Flat Rate shipping charges are only available to the 48 contiguous states. HI/ AK/ APO addresses: Contact us prior to bidding for shipping quotes. PO BOXES: We DO NO
|
|
|
PD5580 APPLIED MOTION PRODUCTS STEP MOTOR DRIVE + 5034-404 STEP MOTOR
Applied Motion Products Step Motor Drive Model# PD5580 Features• Drives sizes 14(1.4" through 42(4.2" step motors• Built in 80 volt power supply(accepts 110 or 220 VAC power. 60 Hz only) MOSFET pulse width modulation switching amplifiers(3 state) Phase current from 0.5 to 5.5 amps/phase(switch selectable. 51 settings) Step. Direction, amplifier enable inputs, fault output, optically isolated• Microstepping from full step through 1/ 254(switch selectable. 16 settings) Overtemp and overcurrent(short circuit) and surge protection• Idle current reduction(50% Switch selectable) pluggable screw terminal connectors Applied Motion Products Step Motor Model# 5034-404 Features DC 1.O7V. 3.97A, 0.27OHM, 200S/R Removed from Functioning Equipment If you need more photos. I can send them to you. If you have any questions. I will do my best to ... moreanswer them. Please be as specific as you can. International bidders please contact first to get shipping quote before bidding. Ship worldwide and use UPS or Canada Post. Please be aware that international shipments may be subject to duty and brokerage fees which are not included in shipping charges.
|
|
|
(V31-1) 1 USED ANAHEIM AUTOMATION BLD75-1 STEP MOTOR DRIVE V31-1
ITEM DESCRIPTION 1 USED ANAHEIM AUTOMATION BLD75-1 STEP MOTOR DRIVE. PART APPEARS TO BE IN EXCELLENT CONDITION AND COMES WITH THE INSTRUCTIONS. SEE PHOTOS! V31-1*IMPORTANT* We are unable to test any of our electrical equipment within our warehouse. Items include ONLY what you see in the photo. If you need an accessory that is not pictured-ASK! PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer use your account number ... morewith Fedex or UPS for any overnight shipments. PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson C
|
|
|
Anaheim Automation Step Motor Driver MBC (Set of 3)
This auction is for: Anaheim Automation Step Motor Driver 3pcs set. MBC10641(1unit) MBC10101(2units) Was pulled from working environment We also listed this item LOCALLY. We resreve the right to end this auction anytime) ~~~~*~~~~ PAYMENT: Payment to be made within 3 days of purchase. We prefer payments with PayPal. WARRANTY: We offer No warranty on this products. RETURN POLICY: No returns accepted without prior return authorization. You must contact us and ask for a Return Merchandise Authorization(RMA) number before returning merchandise; any returned non-defective item(s) is subject to 20% of purchase price restocking charge. All return items must come with original tamper sticker attach to it(no damaged) INTERNATIONAL BUYERS: Please no international. SHIPPING: We offer ground shipping to 48 to contiguous states. Please email us for expedited ... moreshipping and shipping to Hawaii and Puerto Rico. Availability: Usually ships in 7-10 days( IF YOU NEED SOONER PLEASE LET US KNOW. SO WE CAN ARRANGE IT) We ship Via FedEx. UPS and USPS. CALIFORNIA PLEASE ADD 8% SALE TAX. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13eede0b1f2-0xfe-
|
|
|
Applied Motion Products PD5580 Step Motor Driver
Applied Motion Products PD5580 Step Motor Driver Description Applied Motion Products PD5580 Step Motor Driver Manufacturer Applied Motion Products Manufacturer Part Number PD5580 Item/Ship Weight 9 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping We will professionally ... morepackage. Using instapak foam-in-place if needed, and insure this product for safe delivery. Domestic shipping rates are available using the shipping calculator below, subject to terms& conditions. Please contact us for international shipping rates. Local pickup is encouraged for which all shipping and handling fees will be waived PID 42887 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an adjustment to a different method which may change the price for shipping as well. This bug has been reported, but they gave no timeline for a fix, so if you are purchasing an item on t
|
|
|
Oriental Vexta UDK5214NW 5-Phase Step Stepper Stepping Motor Driver 200-230V
Search our eBay Store! Oriental Vexta UDK5214NW 5-Phase Step Stepper Stepping Motor Driver 200-230V SKU: JV-SER-B-OMVUDK Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Oriental Motor Co. Vexta Stepping Driver Auction Includes: Vexta 5-Phase Stepping Driver Model: UDK5214NW 200 ~ 230VAC/ 3.5 A Physical Condition: Used; In Good Physical Condition(See Photos) Working Condition/ Degree of Testing: Functionality is Untested Dimensions(LxWxH) 5” x 6 ½” x 2 ¼” PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. ... moreINC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfied with your purchase.please. Plea
|
|
|
ANAHEIM AUTOMATION MBL628-B11 BILEVEL STEP MOTOR DRIVER
BT# 14294 M04E3-095.1Y You are looking for: ANAHEIM AUTOMATION MBL628-B11 BILEVEL STEP MOTOR DRIVER. USED AND TESTED ITEM! 10 DAYS WARRANTY! Manufactured by: ANAHEIM AUTOMATION. Additional info: BILEVER STEP MOTOR DRIVER. Model: MBL628-B11 Inputs: logic"0" = 0 to 0.8vdc logic"1" = 3.5 to 5.0vdc Output current: 6 Amperes/phase Power requeriment: low voltage supply 3.5 min. 5.5vdc max High voltage supply 35Vdc nominal. 22Vdc- 50Vdc Operating temperature: 0 to 50°C Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
STEPPER MOTOR 1.8 Deg per step
Stepper Motor Used. Very unusual. 103G770-2521 4.1 V 1.8 deg/step Sanyo-Denki Comp. Great condition. Return if not satisfied WYSIWYG I answer all emails! Any Questions? Shipping Anywhere. Shipping Anywhere! We use UPS. Fedx, US Postal Service. Using posted rates based on ZIP& Weight. Go for it! Before someone else does! ALREADY TO GO AT YOUR AUCTION PRICE!
|
|
|
STEPPER MOTOR 0.72 Deg per step PH
Stepper Motor Used. Very unusual. PH566-A-A7 0.72 deg/step Oriental Motor Comp. Great condition. Return if not satisfied WYSIWYG I answer all emails! Any Questions? Shipping Anywhere. Shipping Anywhere! We use UPS. Fedx, US Postal Service. Using posted rates based on ZIP& Weight. Go for it! Before someone else does! ALREADY TO GO AT YOUR AUCTION PRICE!
|
|
|
Vextra 2-Phase 1.8 Step Stepper Motor
Vextra Model C6011-9212 2-Phase Stepper Motor. 1.8 Step DC 4.25 Volt 1.7 Amp The motor came out of a functioning Hobart Label Printer. Posted with
|
|
|
APPLIED MOTION PRODUCTS STEP MOTOR DRIVER 100-240 VAC MODEL PDO5580
SquareTrade © AP6.0 APPLIED MOTION PRODUCTS STEP MOTOR DRIVER 100-240 VAC MODEL PDO5580 You are Purchasing a Applied Motion Products Step Motor Driver. Model: PDO5580 This Motor Driver is in Great Condition and Fully Guaranteed. Input Voltage 100-120/200-240 VAC Amp Rating 3.2/1.6 50/60 Hz 2 Channel A& B Shipping and Handling is $12.90 in the Continental USA. ~ International bidders are always welcome ~- We always combine shipping to give you the lowest cost. Contact us with any questions at 1-800-826-3433( 9-5pm Est) Please visit our other listings on eBay!
|
|
|
Pittman Ametek GM9234C262-R4 Stepper DC Motor 38.2VDC Step 11.5:1 Ratio
Questions? Call us: 1-877-328-9236. Pittman Ametek GM9234C262-R4 Stepper DC Motor 38.2VDC Step 11.5:1 Ratio. Manufacturer: Pittman Model: GM9234C262-R4 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Pittman Condition: Used. Comes in non-original packaging. This motor is in good condition with a few scuffs and scratches from normal use. But nothing major or anything that would affect function. Notes: This stepper motor was pulled from a working machine that was being decommissioned. But was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Pittman-Ametek GM9234C262-R4 Stepper DC Motor, Specifications: Manufacturer: Pittman(Ametek) Model: GM9234C262-R4, Description: DC Stepping/Stepper Motor, Voltage: 38.2 VDC, ... moreDrive Ratio: 11.5:1, Weight: 1.15 lbs. Condition: Used, Quantity: 1, SKU: N21P026 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not shi
|
|
|
RMS R208 Step Motor Driver Microstep Stepper
Auction Wizard 2000 Listing Template- AW2KLOT#12606 RMS R208 Step Motor Driver Microstep Stepper We gladly ship worldwide! RMS R208 Step Motor Driver Microstep Stepper Bipolar Step Motor Driver Operates from +12 to 24 VDC Phase current ranges from 0.35 to 2.0 Amps Peak Selectable Step Resolution from Full. Half, 1/4, and 1/8 microsteps Optically isolated Step. Direction, and Disable/Enable Inputs Selectable Current Reduction of 33% Low Power Dissipation Efficient Current Control Thermal Shutdown. Under-voltage Protection Power-on Indicator Power Disable/Enable Control Sinusoidal current waveform Low Cost Driver Specifications: INPUT VOLTAGE: +12 to 24 VDC(Includes Unregulated Power Supplies) DRIVE CURRENT(PER PHASE) 0.25 to 1.4 Amps RMS. 2 Amps Peak ISOLATED INPUTS: Step Clock. Direction, Enable& Disable STEP FREQUENCY(MAX) 25 kHz STEPS ... morePER REVOLUTION(1.8 MOTOR) 200. 400, 800, 1600 Don't forget to place your bid. By bidding on this auction you agree to the following terms: Shipping Terms: Buyer pays all shipping costs. Let us know if there is an issue with the shipping costs. As they are automatically calculated by ebay. Shipments made to California must include 7.75% sales tax unless we are provided with a valid resale certificate. We reserve the right to ship with Fedex ground. USPS and any other carrier in the best interests of the buyer and seller. The Parcel post option is only available to alaska. Hawaii, and US territories only. If you select parcel post and you live in the lower 48 states you package may be sent by another carrier and/or an additional shipping amount may be required. Payment Terms: Payment is to be made by PayPal in U.S. funds. Please contact us if you have any questions about ebay's recent payment policy change. Payment is to be received within ten days of close of auction. Should payment not be received within ten days the item will be re-listed and high bidder will forfeit. No personal checks will be accepted. International Terms: These terms only apply to international shi
|
|
|
Vexta PX PX243G01-01B 2-PHASE Step Motor
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Vexta PX PX243G01-01B 2-PHASE Step Motor Double Clicking on pictures will enlarge them. Vexta PX PX243G01-01B 2-PHASE Step Motor See Pictures for Details List Price approx $90.00 Please check all photos in case of damage that is not noted above. This is used equipment and some items are in very used condition. Except for what is shown in the photos. This item does not include any other documentation, accessories, cables or software unless stated. Images are of the item we are selling unless otherwise noted. Shipping Cost: $9.00- UPS Ground/ Insured( Continental US Only only) ALL INTERNATIONAL SALES ARE SOLD AS IS I have 100s of Optical Parts& Equipment- listed on Ebay and in My Ebay Store- So follow the link below to my store. Check out my other Auctions Payment Methods: For ... moredomestic payments we accept most major credit cards(Visa. Amex, and Mastercard) We now accept Pay Pal Payments from the US ONLY. For first time International Orders we prefer a Bank Wire or Money Order. Recipient is responsible for all customs. Duties and taxes incurred and payable to the carrier. Buyer must contact seller within 3 buisness days. Or your order will be cancelled! Buyers in CA please add 8.25% for Sales Tax. Unless you have a fully completed CA Sales Tax Exemption Certificate. We will need a signed faxed or scanned copy of this. 650-569 3991 FAX Shipping Methods: The buyer pays shipping charges determined by recipient address or a Flat Fee- Check the listing for detalis. All shipments are sent via UPS. For orders outside the United States. International Economy will be used. International Buyers must get a shipping quote prior to placing their order. Buyers in Russia. Africa& the Middle East need to contact me prior to bidding. Fix Cost shipping is for Continental US Only- Hawiia& Alaska is 2X Please allow 2 Business Days to process your order once payment has been received. Some packages can ship same day. Will Calls are OK- just call ahead. Wh
|
|
|
Applied Motion Products Si3540 Programmable Step Motor Driver
Manufacturer: Applied Motion Products, Part Number: Model: Si3540, Notes: Sold as-is. As pictured. Includes no additional cables. Cards or accessories beyond what is pictured. If you need any further information about this item. Please ask any questions prior to purchase. ims.21620 loc.63-E
|
|
|
HP 0.9 DEG/STEP MOTOR
HP 0.9 DEG/STEP MOTOR 247110-001 From Electroglas Prober Subject to prior sale! For more information. Or to contact us, please feel free to visit our ME page. 14 day Right of Return if not satisfied. Thanks for looking! Please visit our store for more great items! FSR 35- ROW 4
|
|
|
Sanyo Denki Step-Syn 2 Deg/Step Stepper Motor 103-820-0240 IBM 6842531
Sanyo Denki Step-Syn 2 Deg/Step Stepper Motor 103-820-0240 IBM 6842531 Description For sale is a Sanyo Denki Step-Syn 2 Deg/Step Stepper Motor. The unit shows moderate signs of use and is in good working condition. Item is guaranteed non-DOA and is covered under our 14-day return policy. Auction Includes: Sanyo Denki Step-Syn 2 Deg/Step Stepper Motor Only items pictured are included. If a part is not pictured or mentioned in the description then it is not included in the sale. If you are unsure about any aspect of this item please send an email and ask questions before bidding. We do offer combined shipping discounts and free local pickup. Email for details. OceanTech WE BUY& SELL IT EQUIPMENT Guarantee 14 DAY RETURN POLICY: We want our Customers to be happy with their purchases. So customers are welcome to return items within the first ... more14 days of receiving the item if they are unhappy with the item. There will be a 20% restocking fee on any 2nd return from the same customer that are not due to a hardware failure within the first 14 days of receiving the item. There will be no restocking fee for items that break in transit or have a hardware failure in the first seven days the customer receives it. Buyer is responsible for return shipping charges unless there was a hardware failure We will not issue refunds for items we deemed tampered with or are dissembled by the customer. Our Customer Support We do our best to ensure that each and every transaction is free of problems and issues. If you have any questions or concerns we are here to help. Per eBay's policy and guidelines you must contact us before opening a case. We ask that you only open a case as a last resort and will do everything we can to prevent you from needing to do so. If you would like to Contact us! Please use the eBay message system under the"contact seller" hyperlink. Hours: We are open Monday-Friday. 9am-5pm Central Time. We are closed on Weekends and all Major Holidays. We rarely exceed 48 business hours when responding to emai
|
|
|
Sanyo Denki Step-Syn 1.8 Deg/Step Stepper Motor 103G714-1511 IBM 4F6831
Sanyo Denki Step-Syn 1.8 Deg/Step Stepper Motor 103G714-1511 IBM 4F6831 Description For sale is a Sanyo Denki Step-Syn 1.8 Deg/Step Stepper Motor. The unit shows moderate signs of use and is in good working condition. Item is guaranteed non-DOA and is covered under our 14-day return policy. Auction Includes: Sanyo Denki Step-Syn 1.8 Deg/Step Stepper Motor Only items pictured are included. If a part is not pictured or mentioned in the description then it is not included in the sale. If you are unsure about any aspect of this item please send an email and ask questions before bidding. We do offer combined shipping discounts and free local pickup. Email for details. OceanTech WE BUY& SELL IT EQUIPMENT Guarantee 14 DAY RETURN POLICY: We want our Customers to be happy with their purchases. So customers are welcome to return items within the ... morefirst 14 days of receiving the item if they are unhappy with the item. There will be a 20% restocking fee on any 2nd return from the same customer that are not due to a hardware failure within the first 14 days of receiving the item. There will be no restocking fee for items that break in transit or have a hardware failure in the first seven days the customer receives it. Buyer is responsible for return shipping charges unless there was a hardware failure We will not issue refunds for items we deemed tampered with or are dissembled by the customer. Our Customer Support We do our best to ensure that each and every transaction is free of problems and issues. If you have any questions or concerns we are here to help. Per eBay's policy and guidelines you must contact us before opening a case. We ask that you only open a case as a last resort and will do everything we can to prevent you from needing to do so. If you would like to Contact us! Please use the eBay message system under the"contact seller" hyperlink. Hours: We are open Monday-Friday. 9am-5pm Central Time. We are closed on Weekends and all Major Holidays. We rarely exceed 48 business hours when responding to
|
|
|
Oriental Motor Vexta UPH599H-B 5-Phase Stepping/Step Motor DC 2.8A
Questions? Call us: 1-877-328-9236. Oriental Motor Vexta UPH599H-B 5-Phase Stepping/Step Motor DC 2.8A. Manufacturer: Oriental Motor Model: UPH599H-B Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Oriental Motor Condition: Used. Comes in non-original packaging. This motor is in excellent condition with a few scuffs and scratches from normal use. But nothing major or anything that would affect function. Notes: This motor was removed from a working setup that was being decommissioned. But was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Oriental Motor Vexta UPH599H-B 5-Phase Stepping Motor, Specifications: Manufacturer: Oriental Motor(Vexta) Model: UPH599H-B, Description: 5-Phase Stepper Motor, Amperage: 2.8 ... moreAmps, Weight: 5.90 lbs. Condition: Used, Quantity: 1, SKU: N18P007 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer ac
|
|
|
Cnc Japan 5 Phase Step Motor Drive AC 110v 2.8A for NEMA34 Stepper Driver
Cnc Japan 5 Phase Stepper Driver Controllar tested 5 phase motor is much better than 2 phase motor. Model:D-551 Made by Melec Co. in Japan. Input: AC 100-115V Output: 1.4A to 2.8A 5 phase Ideal for 57mm to 86mm 5 wires or 10 wires Step motor Over heat Signal output cw and ccw pulse input Motor excitation stop Signal input Size: 200mm x 150mm x 52mm Weight: 1.1 kg The driver case has instruction& wiring in english Menu: http:www.melec-inc.com/a20111/a20111f01r1.pdf 3 pcs available Each Bid One pcs Combine shipping The first is US$23 the another is US$16 per each You can buy Motor& CNC Parts here THANK YOU
|
|
|
Sanyo Denki Step-Syn 103H7126-0740 3A Stepper Motor QTY=2 units
Sanyo Denki Step-Syn 103H7126-0740 3A Stepper Motor QTY=2 units Used and in working condition Item will be ship via economy shipping. Estimate delivery 7 to 22 working days, +++Please read the Terms& Condition before purchase+++ ACCESSORIES Any accessories. Manuals, cable and etc that are not in the picture listing or mention, it is NOT INCLUDED. INTERNATIONAL BUYER Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying WARRANTY Our warranty is valid for 14 days after initial receipt of item. PAYMENT TERMS PAYPAL. WIRE TRANSFER TT or Contact Us RETURN POLICY-For item condition not as described. Defective. Please report to us for ... morereplacement or refund within 14 days of receipt. Returns must be in their original condition and include all shipped accessories. Shipping fees will NOT be credited for returns and ALL RETURN SHIPPING COSTS ARE THE RESPONSIBILITY OF BUYER. All items will ship with our warranty label. If any stickers have been removed or tampered. Your refund will be canceled. SHIPPING& HANDLING- Item will be dispatch within 1-2 working days after receipt payment confirmation- To avoid delays in shipment. Please provide a contact number to facilitate shipping- Usually order can be receive within the time frame but sometime not. The reason usually cause customs clearance and volume of the mail traffic. So we have no control over the delivery time but remember we always dispatch the order within 1-2 working days. LOC: B21_1. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Oriental/Vexta 2-phase stepping motor C6925-9212K DC 2.3V 3A 1.8/step
Green Penguin Inc. Technology is Renewable Condition: Clean. Tested and functional. Note: If you do not see your model/ part on our compatibility list and you do not see it in our store. Please contact us and we will be happy to assist. One(1) stepping motor as pictured and described. Unless otherwise noted. This listing does not include any other computer parts(likely available in one of our other listings) Types: At this time. Green Penguin accepts PayPal payments only. Please do not ask us for exceptions; we hate saying no: Limitations: We cannot ship to any address other than your PayPal confirmed address. We accept the following payment types through PayPal: Domestic: Free domestic shipping! International: Please see shipping calculator and please contact us for shipping costs on purchases of 3 or more units. Carrier/Method: Orders will ... moreship via USPS or UPS at our discretion. If you require upgraded shipping. Please let us know PRIOR to purchase that we might work to accommodate your requirements. Turnaround Time: Shipping will occur within 1 business day of payment clearance. PayPal eCheck payments take 3-7 days to clear. Please base your standards for speedy delivery upon that window of time. In the unlikely event that you receive an item from us that is not working. We will replace it for you or refund your purchase if a replacement is not available. If you have purchased the wrong item. There are 2 options available: 1) Return for store credit(in many cases. We will have the item you actually need) less the greater of $2.50 or our original shipping costs. 2) Return the item for a refund in the amount of total purchase price less the greater of $2.50 or 25% of your original purchase price. If you are looking for more units than those we have listed. Please; we may have more in stock. We at Green Penguin. Inc. have dedicated ourselves to global e-waste reduction through helping our customers maximize the usable lives of their computer products as easily and affordably as possible. That's w
|
|
|
Cnc Industrial Grade Japan Stepper driver 5 Phase 110v MICRO STEP Motor Drive
Cnc Japan 5 Phase Mirco Step Drive Controllar tested Model:D-5410 For High Speed 1.4A Motor Made by Melec Co. in Japan. Input: AC 100-115V Output: 75A to 1.4A 5 phase Ideal for 42mm to 86mm 5 wires or 10 wires Step motor Over heat Signal output cw and ccw pulse input Motor excitation stop Signal input MIRCO STEP FORM 500 to 10000 ppr(8 steps) Menu: http:www.melec-inc.com/a20111/a20111f01r1.pdf 2 pcs available Each Bid One pcs Combine shipping The first is US$18.9 the another is US$13 per each Will send by register Air mail. Normally 7 to 10 Days You can buy Motor here http:shop.ebay.com/merchant/yuntat_W0QQ_nkwZQQ_armrsZ1QQ_fromZQQ_ipgZ25 You can buy controller BOARD here Setting at 2000ppr Control by Mach3 YOU CAN BUY CNC PARTS HERE http:shop.ebay.com/merchant/yuntat_W0QQ_nkwZQQ_armrsZ1QQ_fromZQQ_ipgZ25 THANK YOU
|
|
|
STEPPER MOTOR 1.8 Deg per step KP
Stepper Motor Used. Very unusual. KP56LM2-035 6VDC 1.8 deg/step Japan Servo Ltd. Great condition. Return if not satisfied WYSIWYG I answer all emails! Any Questions? Shipping Anywhere. Shipping Anywhere! We use UPS. Fedx, US Postal Service. Using posted rates based on ZIP& Weight. Go for it! Before someone else does! ALREADY TO GO AT YOUR AUCTION PRICE! On Jun-16-13 at 17:26:58 PDT. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f51113337-0xfa-
|
|
|
Superior Electric M111-FF-401 Slo-Syn 1-Stack NEMA 42 Step Motor 750Oz-In! WOW !
Superior Electric M111-FF-401 Slo-Syn 1-Stack NEMA 42 Step Motor 750Oz-In! WOW! This item is used. Tested, in good working condition! Pictures above are of actual item for sale. Location W2-M40 Lister: MM. If you have any questions or require more pictures. Please contact me! NEXT DAY DELIVERY AVAILABLE- PLEASE CALL FOR DETAILS! Not what you are looking for? Visit our e-store! Powered by
|
|
|
Vexta Stepping Motor PK245-01AA 2-Phase Stepping Motor 1.8°/Step Angle - Used
Oriental Motor Vexta PK245-01AA 2-Phase Stepping Motor Used working motor. 2-Phase 1.8°/Step Angle attached leads- no connectors included with attached plastic gear and roller as pictured Lot of 1 motor Used motor offered as is.
|
|
|
ORIENTAL MOTOR PH268-21 STEPPING MOTOR VEXTA 2-PHASE 1.8°/STEP 5.4VDC 1.5AMP
BT# 14779 M07E1-080.1Y You are looking for: ORIENTAL MOTOR PH268-21 STEPPING MOTOR VEXTA 2-PHASE 1.8°/STEP 5.4VDC 1.5AMP. USED AND TESTED ITEM! 10 DAYS WARRANTY! Manufactured by: ORIENTAL MOTOR. Additional info: STEPPING MOTOR VEXTA. Model: PH268-21 2 Phase 1.5 Amp 5.4 VDC 1.8°/ Step Shaft Size: 3/4" Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
Semix Rorze RD-122 Step Drive Motor Driver
Semix/Rorze RD-122 step drive motor driver Internal Part Number: MSC-499 Make: Rorze Model: RD-122 Serial Number(if known) Unknown Date Made(if known) Unknown Condition: Used. As-Is. Condition as seen in the pictures. No refunds. Notice Regarding Payment& Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE- International customers pay actual shipping charges(See Details Below) We have thousands of items that will be listed for sale. If you are looking for something specific. Please let us know. For more information about this or any item. Please contact the seller. We endeavor to provide the most accurate and detailed information as possible. We realize that the information provided is important. And we strive to provide complete and accurate information. While infrequent, typos may happen. As such, we must direct ... moreyour attention to the photos as the final determinant regarding your purchase decision. Please contact seller with any specific questions regarding the information provided herein. This item is used surplus. This item appears to be in good physical condition. Although there may be signs of use. This item has been stored in a warehouse. The pictures are of the actual item. ONLY items pictured are included. If a part is not pictured. Or mentioned above, then it is not included in the sale. Satisfaction Guarantee(See Details Below) Got Questions? contact us! Business Hours: 9am to 5pm CST Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 9am to 5pm CST Monday to Friday Email Address: semiconductorspares@gmail.com Phone: 214-389-4358 Fax: 214-279-0784 Physical/Mailing Address: 10835 Shady Trail. Dallas, Texas 75220. USA Location visits by appointment only. Payment/Checkout Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days. We accept: PayPal. All Major Credit Cards, Bank Wire Transfers in USD(there is a $25 wire transfer fee) and business che
|
|
|
MITSUMI Stepping Motor M35SP-7 step angle 7.5 56 ohm brass gear stepper robotics
Normal 0 false false false EN-US X-NONE X-NONE used mitsumi stepping motor with cable. specifications below. thanks for looking Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 MITSUMI Stepping Motors M35SP-7 OUTLINE"M35SP-7" has the thinnest body among the 35mm outer diameter model series. Output torque characteristics-holding torque: 29.4mN·m. Pull-out torque: 18.1mN·m/200pps, and pull-in torque: 17.6mN·m/200pps(6V DC) With these torques this motor materializes an excellent size performance. Stepping Motors FEATURES 1. Compact size and high output torque. 2. Superior running quietness and stability. 3. Step angle: 7.5°. 4. Excellent responsiveness acquired. USES Printers. Multifunction machines, copy machines, FAX, and such. Items M35SP-7 Rated Voltage DC 6V DC 24V Working Voltage DC ... more5.4~6.6V DC 21.6~26.4V Rated Current/Phase 807mA max. 517mA No. of Phase 4 Phase 4 Phase Coil DC Resistance 8 Ù/phase±7% 50 Ù/phase±7% Step Angle 7.5°/step 7.5°/step Excitation Method 2-2 Phase excitation(Unipolar driving) Insulation Class Class E insulation Class E insulation Holding Torque 29.4mN·m 34.3mN·m Pull-out Torque 18.1mN·m/200pps 31.4mN·m/200pps Pull-in Torque 17.6mN·m/200pps 30.9mN·m/200pps Max. Pull-out Pulse Rate 770pps 1.050pps Max. Pull-in Pulse Rate 710pps 850pps MITSUMI SPECIFICATIONS Stepping Motors CHARACTERISTICS M35SP-7(8 Ù. 6V DC) 0 0 4.90 9.80 14.70 19.60 24.50 29.40 34.30 100 200 300 400 500 600 700 800 Pull-out Torque Pull-inTorque Pulse Rate(pps) Torque(mN·m) M35SP-7(50 Ù. 24V DC) 0 4.90 9.80 14.70 19.60 24.50 29.40 34.30 0 200 400 600 800 1000 1200 1400 Pull-out Torque Pull-inTorque Pulse Rate(pps) Torque(mN·m) DIMENSIONS Unit: mm. General tolerance: ±0.5
|
|
|
STR4 Step Motor Driver
Current range.25A to 4.5A peak of sine, Electronic damping(anti-resonance) Microstepping& microstep emulation, Built-in self test move profile, Step& direction inputs, CW Pulse/CCW pulse operation, Idle current reduction, Selectable digital input filter, Sell for $196.00 new.
|
|
|
ORIENTAL MOTOR VEXTA C8430-9212K 2 PHASE STEPPING MOTOR 1.8º STEP 2.52 DC 2.8A
ORIENTAL MOTOR VEXTA C8430-9212K 2 PHASE STEPPING MOTOR 1.8º STEP 2.52 DC 2.8A SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS SV 28 DRAWER 3 CM a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13f9b7f4bc8-0xfb-
|
|
|
ANAHEIM AUTOMATION 23D209D STEP MOTOR 1.7VDC 4.7A INSULATION
BT# 15015 M07D1-100.1Y You are looking for: ANAHEIM AUTOMATION 23D209D STEP MOTOR 1.7VDC 4.7A INSULATIONB AS-IS ITEM! NO WARRANTY! Manufactured by: ANAHEIM AUTOMATION. Additional info: STEP MOTOR Model: 23D209D Voltage: 1.7 VDC Current per Phase: 4.7 Amps/ phase Holding Torque: 100 In-oz(70.63 N-cm) Rotor Inertia: 0.0030 oz-in-sec²(0.0212 kg-cm²) Stepper Construction: Hybrid Insulation: B Shaft Front: Lenght: 0.7 in Dia. 0.1 in Back: Lenght: 0.8 in Dia. 0.1 in Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13fb1e850cc-0xe6-
|
|
|
SANYO DENKI STEP-SYN STEPPING MOTOR TYPE: 103-770-7241
SANYO DENKI STEP-SYN STEPPING MOTOR TYPE: 103-770-7241. This item was removed from a working Fujitsu scanner M4099D.
|
|
|
Rorze RD-022N 2 Pole 2 Pulse Step Stepper Motor Drive Driver
Rorze RD-022N 2 Pole 2 Pulse Step Stepper Motor Drive Driver Please contact me for more information. Thank you for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
AMAT 0010-40309 Upgrade HP + Centura Robot Driver Motor Harmonic 5-Phase Step
AMAT 0010-40309 Upgrade HP + Centura Robot Driver Motor Harmonic 5-Phase Step. System 2121 Bell Flange Vexta 5-Phase Stepper A4249-9215HG-A1 DC 1.4A Harmonic Gear Box s/n 13999705 Please contact us for more information. Thanks for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
Vexta 5-Phase NanoStep Step Stepper Motor Drive Driver DFR1507A 24V
Vexta 5-Phase NanoStep Step Stepper Motor Drive Driver DFR1507A 24V Please contact me for more information. Thank you for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
TAIG Micro Mill 2000 Cnc 3 Axis Step motor Controller with 3 motors & software
TAIG Micro Mill 2000 Cnc 3 Axis Step motor Controller INPUT AC 120v 2A Three 200oz/in NEMA23 Step Motor with Turning Knob ONE 3 AXIS Drive PC Controller System Box ONE PC Control Software MPS2000 ver2.1d For Dos Can used the Turbocnc or Mach3 Software Include ALL CABLES& ONE CD MENU Total Weight About 13kg Made in USA IDEA FOR TAIG CNC Ready Micro Mill Shipping By Fedex YOU CAN BUY CNC PARTS HERE Thank You
|
|
|
RORZE RD-023M10N 2 Phase Micro Step Stepper Motor Driver
For sale is a RORZE RD-023M10N Micro Step 2 phase stepper motor driver in very good cosmetic condition that was removed from a piece of working equipment. Please do your own due diligence to insure that this item is appropriate for your needs. You are buying the one shown in the picture. Thanks for looking!
|
|
|
Super Vextra Oriental Motor Fine Step 5-Phase Driver DFU1507
YOU ARE BIDDING ON A SUPER VEXTRA ORIENTAL MOTOR FINE STEP 5-PHASE DRIVER DFU1507 Condition: The unit has minor cosmetic damage. Please see the pictures for details. Warranty: No. Tested: I have no way to test this unit. Payment Details: We only accept PayPal payments. Payment must be made within 2 days of the close of the auction. Seller charges sales tax for items shipped to: CA(8.75% Shipping Policy: We ship all orders within 2 business days of receiving cleared payment. The listed shipping rate is calculated by Fedex Ground from our location to your zip code. Please click here for Fedex shipping rates and transit times. We will ship WORLDWIDE with appropriate customs documents as required. International Buyer are responsible for all custom taxes and fees. Return Policy: No returns accepted. Item sold as is.
|
|
|
OEM series step motor parker compumotor 83-62-mo + THK LM guide actuator
USED.GOOD CONDITION. PLUS THK LM GUIDE ACTUATOR. On Jul-23-13 at 10:44:39 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
|
|
|
MICRO STEP MC-7514 MOTOR DRIVER
Used: An item that has been used previously. The item may have some signs of cosmetic wear. But is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. WE DO DIS MENTAL MOST USED MACHINE FOR RESELL Item will be ship via economy shipping. Delivery take about 7 to 21 working days to most countries or urgent shipment via FEDEX, UPS,OR DHL +++Please read the Terms& Condition before purchase+++ ACCESSORIES Any accessories. Manuals, cable and etc that are not in the picture listing or mention, it is NOT INCLUDED. INTERNATIONAL BUYER Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's ... morecustoms office to determine what these additional costs will be prior to bidding or buying WARRANTY Our warranty is valid for 14 days after initial receipt of item. PAYMENT TERMS PAYPAL. WIRE TRANSFER TT or Contact Us RETURN POLICY-For item condition not as described. Defective. Please report to us for replacement or refund within 14 days of receipt. Returns must be in their original condition and include all shipped accessories. Shipping fees will NOT be credited for returns and ALL RETURN SHIPPING COSTS ARE THE RESPONSIBILITY OF BUYER. All items will ship with our warranty label. If any stickers have been removed or tampered. Your refund will be canceled.
|
|
|
4 Axis Step Stepper Motor Controller + 10A PWM Driver PC Parallel Port Control
SOC MC433 4-Axis Unipolar Stepper Motor Controller/Driver Board- 4-Axis Controller + 4 10amp Drivers in one Board! This board is used. Untested surplus stock. It is sold AS-IS with no return option. It's condition appears to be new. But has no electrical guarantee. The MC433 is a 4-Axis unipolar stepper motor controller that converts step/direction inputs to jumper selectable wave. Full or half step 4-phase power control. Each of the four phase coils of a unipolar stepper motor is connected to an IRF540 Power MOSFET switch. The IRF540 is capable of 8A continuous current load with the ability to peak at 33A. Each phase is pulse width modulated(PWM) to allow operation over a 7 to 35 volt range. PWM adjusts average current delivered to the stepper motor to better match the resistance/inductance of the motor without the need for load resistors. ... moreThis ensures maximum power is delivered to the motor over a range of load conditions and motor types. PWM parameters are adjusted using three potentiometers- initial on time. Chop rate duty cycle and duty cycle slew rate verse step rate. Chop rate is fixed at 12KHz. On time is the amount of time a switch remains on before PWM operation takes over– this allows the current to build to a maximum level as quickly as possible. Duty cycle is the percentage of on-time to off-time at a given chop frequency. Duty cycle is used to set the average current delivered to the motor. Duty cycle slew rate adjusts the duty cycle based on the duration of a step. As the step rate slows down(motor turns slower) the duty cycle is adjusted to deliver less power to the motor thereby maintaining constant current. Each motor can be individually set to wave. Full, half step mode or be disabled by setting two jumpers on a four pin header. An onboard programming interface allows new Motor Controller programs to be loaded into Flash. A dedicated 8bit 20MHz RISC microprocessor(ATmega168) controls each axis. The microprocessor monitors step/direction inputs. Limit switch input and PWM settin
|
|
|
APPLIED MOTION PRODUCTS 5034-349 STEP MOTOR
Applied Motion Products Step Motor Model# 5034-349 Features DC 2.5V. 5A, 0.5OHM, 200S/R Removed from Functioning Equipment If you need more photos. I can send them to you. If you have any questions. I will do my best to answer them. Please be as specific as you can. International bidders please contact first to get shipping quote before bidding. Ship worldwide and use UPS or Canada Post. Please be aware that international shipments may be subject to duty and brokerage fees which are not included in shipping charges.
|
|
|
APPLIED MOTIONS PDO 3540 STEP MOTOR DRIVE
This listing is for an APPLIED MOTIONS PDO 3540 STEP MOTOR DRIVE This is used. Not tested. Guaranteed to work as it should. Normal signs of use. And wear. Comes as pictured. Will ship to the Continental US states only. Please inquire first. Prior to purchase, if in another location. Returns are accepted. Please contact us prior to leaving feedback. We will offer a refund not including the shipping cost or an exchange where possible. Buyer pays return shipping for item to come back to us prior to refund. All items will be shipped within 1 business days. We ask to kindly leave feedback if all is smooth. As we will do the same soon after. ALL the items you see are"FOR SALE" not"To Keep" If interested at any means. Please, MAKE a fair OFFER' I could just be in the mood to say yes!
|
|
|
Oriental Motor ASM98AC-N5 Step Motor, Closed Loop 3.41V 1.1A ! WOW !
Oriental Motor ASM98AC-N5 Step Motor. Closed Loop 3.41V 1.1A! WOW! This item is used. Tested, in good working condition! Pictures above are of actual item for sale. Location W2-M-27 Lister: BZ. If you have any questions or require more pictures. Please contact me! NEXT DAY DELIVERY AVAILABLE- PLEASE CALL FOR DETAILS! Not what you are looking for? Visit our e-store! Powered by
|
|
|
Clean Vexta UDK2120A 2-Phase Stepper Motor Driver Controller Step Drive
Clean Vexta UDK2120A 2-Phase Stepper Motor Driver Controller Step Drive Details: Manufacturer: Vexta Oriental Motor Co. Ltd. Model: UDK2120A AC 100V +- 15% AC115V +- 15% 50/60 Hz 2.2 Amps Condition: Good cosmetic condition with some signs of previous use(see photos for more detail) Tested: Unit was removed from a working environment Warranty: 14-Day Right-of-Return_ Terms and Conditions Only the items pictured will be included. If it is not pictured or mentioned in the description it is not included. If you have any questions. Please contact us before bidding or buying. Payments: Payment must be received within three(3) days of the date of purchase. We currently only accept PayPal. If you are having trouble completing your purchase. Please feel free to contact us. All California buyers wil be charged 8.375% sales tax. Shipping: Buyer is responsible ... morefor all shipping costs. Including return shipping in the event of a return. All items will be securely packed and shipped with the buyers requested method. If you would like to add shipping insurance, please conact us for rates, and coverages. Warranty*Please see listing above for the warranty that applies to this item. As-Is. No Returns: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment. Or warranty items that have been altered or damaged. We maintain the right to use our descretion when choosing between a replacement or refund. Returns: NOTE: Original shipping charges are Non-Refundable Defective/DOA: We accept returns for Defective/DOA items within 14 days of receipt by the customer. If you receiv
|
|
|
Vexta PH268-21 Stepping Motor 2-Phase 1.8/Step 5.4VDC 1.5A
Vexta PH268-21 Stepping Motor 2-Phase 1.8/Step 5.4VDC 1.5A Manufacturer: Vexta Model: PH268-21 2-Phase 1.8/Step 5.4VDC 1.5A Used And Removed From Working Surplus Normal Wear Take A Moment And Visit Our Ebay Store Please Read Terms and Conditions USA Sales Only All auctions must be paid for with in 10 Days of end of auction. All items are SOLD AS-IS Unless otherwise stated in the auction. All end of auction notifications will be sent to your registered Ebay email address. We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. If for some reason an item has to be returned to CTR Surplus the Buyer will have to pay the return shipping. The original shipping charges are not refundable. All returns are subject to a 20 percent restocking fee. For any return you must ... moreemail CTR Surplus with in 3 days of receipt of the item. Please ask all questions before placing a bid. Most items will be shipped UPS Ground and automatically insured for the bid amount. Any item that requires Truck Freight will require Buyers phone number and someone to unload the item from the truck(The Freight Company Will Not Unload The Truck) CTR Surplus 202 W. Livingston Ave Crestline Ohio 44827 Phone 419-683-3535 Fax 419-683-3230 All Auctions Will Be Automatically Insured For Final Bid Price Please click here to see my other auctions. 7.00% Sales Tax Will Be Charged On Item Price And Shipping On All Ohio Sales Powered by
|
|
|
Sanyo Denki Stepper Motor + Mount, Type 103H5205-1341, 1.8 deg/step, D5-MH@275
This listing is for a Sanyo Denki Stepper Motor with mounting bracket. The item is surplus from a scientific instrumentation company. Type 103H5205-1341, 15.5 ohm, 1.8 deg/step, If not satisfied for ANY reason. Send back within 60 days for a refund. Please see our other listings, since we combine shipping. Thank you for your interest! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VEXTA Stepping Motor, 2-Phase, 1.8 Deg/Step, 2.25VDC, 1.5A, PH264-E1 .5-C6
Item up for sale is a: VEXTA Stepping Motor 2-Phase. 1.8 Deg/Step 2.25VDC. 1.5A, PH264-E1.5-C6 Item is used and is untested other than what is indicated below: some wires need to be respliced- please refer to pictures- If you have any questions regarding this item please feel free to contact me and I will do my best to answer your questions 1 item as shown in picture. Picture represents the actual item. 2 Pounds in a box with packaging materials Included is only what is mentioned. No other cables. Parts, power cords, power adapters, software or any other accessories included. ============================================================================ Terms of Sale Payment Options PayPal only or contact us for payment methods to pay on pickup. Bank transfers or payments using a Cashier’s Check may be available. Contact us for additional information ... moreand fees. RETURNS Warranty for Items shipped in the US 14-Day Right to Return- Buyer has 14 days to test item to determine its operational condition unless it was listed as Parts-Only or As-Is. Should the item be received non-operational you may return the item for refund of the purchase price. 14-day period starts the day you receive the item. You cannot return an item because it is not compatible with the system you installed the item into. Please insure that the item you are purchasing is compatible with the application or in the system you intend to use it. Warranty for Items shipped outside the United States All international sales shipped to a destination outside the US are non-refundable. All international sales are final. SHIPPING Shipping within the United States Buyer is responsible for all shipping costs including returns. Please note for domestic shipments(within US) we ship FedEx ground only. But you can use UPS ground shipping rates(calculated automatically by eBay) to estimate the shipping charges. Actual FedEx ground rates may be cheaper then UPS depending on the destination, so for heavy packages you can always contact us to get the exact sh
|
|
|
Oriental Motor Co Vexta Stepping Motor A3939-9412 2-Phase 1.8/Step 1.8VDC 4.5A
Oriental Motor Co Vexta Stepping Motor A3939-9412 2-Phase 1.8/Step 1.8VDC 4.5A Used/Tested Working No Cords. Cables, Manuals, Or Accessories Included! Your Bid Is For The Stepping Motor Pictured Model: A3939-9412 2-Phase 1.8/Step DC 1.8V 4.5A Normal Wear From Use Take A Moment And Visit Our Ebay Store Please Read Terms and Conditions USA Sales Only All auctions must be paid for with in 10 Days of end of auction. All items are SOLD AS-IS Unless otherwise stated in the auction. All end of auction notifications will be sent to your registered Ebay email address. We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. If for some reason an item has to be returned to CTR Surplus the Buyer will have to pay the return shipping. The original shipping charges are not ... morerefundable. All returns are subject to a 20 percent restocking fee. For any return you must email CTR Surplus with in 3 days of receipt of the item. Please ask all questions before placing a bid. Most items will be shipped UPS Ground and automatically insured for the bid amount. Any item that requires Truck Freight will require Buyers phone number and someone to unload the item from the truck(The Freight Company Will Not Unload The Truck) CTR Surplus 202 W. Livingston Ave Crestline Ohio 44827 Phone 419-683-3535 Fax 419-683-3230 All Auctions Will Be Automatically Insured For Final Bid Price Please click here to see my other auctions. 7.00% Sales Tax Will Be Charged On Item Price And Shipping On All Ohio Sales Powered by
|
|
|
Rorze RD-022 2 Pole 2 Pulse Step Stepper Motor Drive Driver
Rorze RD-022 2 Pole 2 Pulse Step Stepper Motor Drive Driver Please contact me for more information. Thank you for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
Rorze RD-122 2 Pole 2 Pulse Step Stepper Motor Drive Driver
Rorze RD-122 2 Pole 2 Pulse Step Stepper Motor Drive Driver Please contact me for more information. Thank you for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
Rorze RD-323ms 2 Pole 2 Pulse Micro Step Stepper Motor Drive Driver
Rorze RD-323ms 2 Pole 2 Pulse Micro Step Stepper Motor Drive Driver Please contact me for more information. Thank you for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
Rorze RD-023 2 Pole 2 Pulse Step Stepper Motor Drive Driver
Rorze RD-023 2 Pole 2 Pulse Step Stepper Motor Drive Driver Please contact me for more information. Thank you for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
ANAHEIM AUTOMATION 42D212S STEP MOTOR 3.6 VOLT 6.1 A
ANAHEIM AUTOMATION 42D212S STEP MOTOR 3.6 VOLT 6.1 A CURRENT INSULATION B 9417 FOR MORE COMPLETE INFO CLICK HERE SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS ROW 4 SHELF 5 CM
|
|
|
Shinano Kenshi/Japan Stepper Motor Model STH-55D509, 1.8Degree/Step, 3V 1.35amp
Shinano Kenshi/Japan Stepper Motor Model: STH-055D509. 1.8 Deg/Step. 3V, 1.35amp International Buyers are responsible for all Duties. Tariff's and VAT's. Click here to browse my ebay store. Please ask questions or indicate concerns prior to bidding. Your bid is for the listed item& description only and comes with nothing else. i.e. if it is not mentioned in the description or not shown in the item’s picture it is not included) By placing a bid. You agree to all stated terms. All items are sold as advertised, as is and without warranty, unless otherwise stated in the item description. Please take time to review terms and conditions of sale; TERMS AND CONDITIONS Item Description& General Terms& Conditions: The majority of the items we sell have been obtained from a functional work bench. However, because most of our items ... moreare untested and uncertified items are sold as is with no warranty. Our capabilities to test equipment are limited. Therefore most item have not been tested, and if they are tested. It is not by a qualified technician unless otherwise clearly stated in the description. Items do not come with power cables.Manuals or additional hardware or software except for what is shown in the image or explicitly stated in the description. The description of any item is accurate to the best of our knowledge. We appreciate any feedback you can give us about any listing that will provide more specific information about the product or correct inaccuracies that may appear in our listings. Buyer is responsible for all shipping charges. Shipping costs listed on ebay are estimations; any additional fees will be billed to the purchaser. Buyer is responsible for making freight arrangements including packaging and/or crating on items that require to be shipped via freight. International buyers are responsible for all cost related to shipping. Taxes, duties, import fees etc. DUTIES. TAXES,Tariffs and VAT’s or other Import Fees; the bidder/buyer is solely responsible for all these fees. All items are ship
|
|
|
Rorze 2Pole 2P Step Stepper Motor Drive Driver RD-126 Multispeed w/Oscillator 6A
Rorze 2 Pole 2 Pulse Step Stepper Motor Drive Driver RD-126 Multi-speed with Oscillator Please contact me for more information. Thank you for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
Rorze 2 Pole 2 Pulse Micro Step Stepper Motor Drive Driver RD-021M8
Rorze 2 Pole 2 Pulse Micro Step Stepper Motor Drive Driver RD-021M8 Please contact me for more information. Thank you for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
Vexta 5-Phase Step Stepper Motor Drive Driver CSD5828N-T 2.8 Amps
Vexta 5-Phase Step Stepper Motor Drive Driver CSD5828N-T 2.8 Amps Please contact me for more information. Thank you for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
Vexta 5-Phase Stepper Step Motor Drive Driver CSD5807N-T 24V
Vexta 5-Phase Stepper Step Motor Drive Driver CSD5807N-T 24V Please contact me for more information. Thank you for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES
|
|
|
Pacific Scientific PowerMax 1.8º Step Motor P22NRXE-LNN-NS-00 8.80 VDC 1.16 Amp
Pacific Scientific PowerMax 1.8º Step Motor P22NRXE-LNN-NS-00 8.80 VDC 1.16 Amp Condition: NEW. In box NEW. No box NEW. Old inventory XX USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ... moreARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On large items we may request certified funds only.
|
|
|
WARNER ELEC. STEP MOTOR SM-200-0035-FE 40VDC
WARNER ELEC. STEP MOTOR SM-200-0035-FE 40VDC STORE LOC WB 2A 9D Absolute. Has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type. Condition and image of the goods at the time of sale. Absolute makes no expressed or implied warranties or representations regarding the condition or suitability of the goods and to the extent allowed by law, specifically disclaims any expressed or implied warranties, including but not limited to any warranty of merchantability or fitness for purpose. Therefore Absolute offers its customer’s a 14-day DOA warranty on all its listings. All items are to be paid for in U.S. dollars(NO Exceptions) at the end of the auction or time of order unless a separate agreement has been made before hand. Within one business day of the ... moreend of auction or your order placement you will be contacted via email about the items you purchased and the total amount due. Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday)
|
|
|
Anaheim Automation MBL628-B21 Bilevel Motor Driver - Half & Full Step Excitation
Anaheim Automation MBL628-B21 Bilevel Motor Driver- Half& Full Step Excitation An Anaheim Automation model MBL628-B21 Bilevel Motor Driver. Which has both half& full-step excitation modes. Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used- This item is untested. Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Shipping Info: Shipping weight is 2 lbs. Shipped from the Los Angeles area. zip 90221) Default Shipping Service: USPS Priority Mail California residents will be charged 9.00% sales tax. Tennessee residents will be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax ... moreto any shipment sent anywhere in ether state. We accept the following methods of payment: Call 1.800.421.2442 to pay via. credit card over the phone. For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/rejected from your country for any reason. We are happy to refund the cost of the item only, less any eBay fees and shipping costs.
|
|
|
VEXTA Stepping Motor 2-Phase 1.8 degree step DC 2.3V 3A / C6925-9212K
WARNING PLEASE READ CAREFULLY WHAT YOU BIDDING ON. YOU ARE BIDDING ON: This item is used REMOVED FROM WORKING ENVIRONMENT BUYER Make sure that item is compatible with your system before buying. Anything else not mentioned is not included* CONDITION: Unit IS USE FULL WORKING. NOTE: IT USE ITEM SCUFFS. SCRATCHES NOMAL USE Please refer to pictures for more details. WARRANTY: This item has warranty 14 DAY for returns OTHER ACCESSORIES NOT SHOWN IN PICTURE ARE NOT INCLUDED! PAYMENT: We prefer Paypal(Using Paypal we are able to ship your item faster) All buyers must contact us at the end of the auction if invoice through ebay has not been received. Payments must be cleared no later than 3 days after the auctions end. otherwise. Item will be relist. SHIPPING: We'll ship within 24hrs of payment; buyer pays shipping/handling. U.S. only. I Do not ... moreship international. WARRANTY/RETURNS: We welcome your questions by E-MAIL. But you are expected to do your own research in regard to the compatibility and/or software/driver requirements for any item they are considering purchasing. We will not be responsible for any incompatibility issues with your unit. In most cases, all information that we have available to us is included in the text of the auction. Any components, accessories and/or documentation not shown on auction pictures are not included. All auctions that are sold"AS IS" are subject to no returns or refunds under any circumstance
|
|
|
! Parker Compumotor 6200 2-Axis Drive Indexer for Step + Direction Motor Drives
RDR ELECTRONICS WILL ONLY SHIP TO U.S. ADDRESSES. FOREIGN BIDDERS WILL BE APPROVED TO BID ONLY AFTER PROVIDING A U.S. SHIPPING ADDRESS! Auction consisting of: 1- Parker Compumotor 6200 2-Axis Drive Indexer. This auction is for a used Parker Compumotor 6200 2-Axis Drive Indexer. It is in good shape with light signs of use. We powered it up to the green status LED, but that is as far as we could test it! This unit is for standard Step and Direction Motor Drives. We acquired this unit from an aerospace firm in a surplus lot. Unit comes with the Encoder 1, Power and the bottom portion of the Aux 1 connectors. See the two Parker links listed below, for more in depth information on this 6200 Indexer! We have a great starting bid and we are including a 30-day warranty on this sale! Only what is listed above and/or shown in the pictures below are ... moreincluded in this auction. Item weighs about 8 1/4 pounds. For more detailed information we have provided this link to the website. For more detailed information we have provided this link to the website. Used condition. This item is being sold with a 30-day warranty. Check the shipping calculator for S/H cost to your ZIP code. Item will be insured for the bid amount. To view all of our current E-bay auctions click on our RDR-Electronics Items for Sale Page link below! Click on any image for a more detailed view. Click on any image for a more detailed view. Terms and Conditions: There is no need for us to email you after the auction ends. Simply pay the amount of the winning bid plus the S/H indicated by the shipping calculator for your ZIP code. We do not try to make(or lose) money on our S/H cost. We try to offer quality shipping at a fair price. We use new boxes. Peanuts, and bubble wrap and try to pack our items well(check our feedback) We pack items immediately after auction closing. If you are bidding on multiple items please contact us and we will be happy to combine items if possible to lower cost. If you desire combined shipping, contact us before payment a
|
|
|
Centent CN0170 Step Motor Motion Controller 2-Axis Micro-Stepping X-Y Driver CNC
Payment Policy Brand New Sony CyberShot 8 MP Di Centent CN0170 Step Motor Motion Controller 2-Axis Micro-Stepping X-Y Driver CNC Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Centent CN0170 Step Motor Motion Controller 2-Axis Micro-Stepping X-Y Driver CNC Used Condition Centent/ Ultratech Stepper X-Y 2-Axis Step Motor Motion Controller Model: CN0170 Centent 2-Axis Micro-Stepping High Resolution Stepper Motor Driver http:www.centent.com/CN0170.html Inventory Number: 3K92035-10-13 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number ... moreof the item that you receive may vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method
|
|
|
RMS TECHNOLOGIES IMD23-L01 Bipolar Step Motor
Add my Store to your Favorites and receive my email newsletters about new items and special promotions! General Interest, RMS TECHNOLOGIES IMD23-L01 Bipolar Step Motor. NEMA Size 23. 2 Phase, 1.8° Bipolar Step Motor w/ Built-In Microstepping Driver Operates from +12 to 48 VDC Phase currents from 0.3 to 3.0 Amp Peak Step Resolutions from Half Step to 256x Microstepping 4 Selectable Damping Modes Pole Damping Technology™ for the smoothest motion on the market Configuration Board Port. PAYMENT: Payment is due upon receipt of your invoice. We accept PayPal payments and all major Credit Cards during the checkout process. We do not collect credit card or personal information. COMBINED SHIPPING: We always adjust shipping costs for multiple items paid for and shipped within the same business day. Items or quantities requiring multiple packages ... moremay not receive a discounts on shipping. SHIPPING: We ship using UPS and the US Postal Service(USPS) We do allow customers to use their own UPS account for overnight or special shipping situations. A packaging fee may be applied to your invoice. It is your responsibility to provide a deliverable ship to address at the time of purchase. Most orders are shipped same day with the exception of freight. Overnight Shipments: We can accommodate most requests. It is recommended that you make your purchase and payment before 3 PM MST. We do not refund overnight shipping costs. A valid phone number is required. Overseas Shipments: We ship USPS Priority Mail International in most cases. Each country has its own unique weight and size restrictions when using USPS. IF your package is over the USPS limits for your country. We will quote you UPS costs. Delivery times vary per country, we do not guarantee delivery times or how long the host country holds a package in customs. we have seen shipments via USPS take as long as 6 weeks. We do not allow self shipping and carrier pickup on non freight packages; we can ship items using your UPS account through our system. We do not ship FedEx, DHL, o
|
|
|
Oriental Motor PH268M-E1.5B 2Phase 0.9deg/step Free Shipping!!!
Manufacturer: Oriental Motor Vexta Model: PH268M-E1.5 Shaft DIA: 6.35 mm or 1/4" Overral Length(with out shaft) 76.2mm Shaft Length: 20mm + Unipolar 10wires + + 2-Phase + + 0.9deg/Step + + 5.4VDC 1.5A + + NEMA 23 + Used in Good Condition. Shipping Weight: ABT. 850g FREE SHIPPING WORLD WIDE REGISTER with tracking no. Posted with
|
|
|
RAPIDSYN 23H -502 STEP MOTOR 12 VDC (C11-3-26)
This auction is for one RAPIDSYN 23H-502 STEP MOTOR 12VDC RAPIDSYN 23H-502 STEP MOTOR 12 VDC(S2-1-65E) Powered by
|
|
|
Lot of 2 Oriental Motor Vexta 2-Phase C017C-9212H DC 2.08V 4.62A 1.8/Step Motors
Questions? Call us: 1-877-328-9236. Lot of 2 Oriental Motor Vexta 2-Phase C017C-9212H DC 2.08V 4.62A 1.8/Step Motors. Manufacturer: Oriental Motor Model: C017C-9212H Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Oriental Motor Condition: Used. Items have some minor scratches from previous use. Items come in non-original packaging. Items are in great physical working condition. Notes: Items were removed from an working environment. No testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 2) Oriental Motor Vexta 2-Phase Stepping Motors, Specifications: Manufacturer: Oriental Motor Company, Model: C017C-9212H, Type: Vexta Stepping Motor, 2-Phase, 1.8: Step, DC Volts: 2.08, DC Amps: 4.62, 4-Pin Connector& Cable, SKU: N32Y002 For ... morequestions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged thr
|
|
|
Oriental Motor DRSD07A-KA Step Motor Driver Controller
Oriental Motor DRSD07A-KA Step Motor Driver Controller. 24V 0.8A. Made in Japan. Ship from Thailand to Worldwide 19 $ by register small packet-air 14-21 working days Payment by PayPal Thank you.
|
|
|
API P315X-H Step Motor DRIVE INDEXER 95-135VAC
This listing is for an API P315X-H POWER DRIVE INDEXER 95-132VAC P315X-H. Unit has been pulled from a working environment.What you see is what you get in this listing. Item is in GOOD physical condition and has some minor cosmetic damage(refer to photos for details) SOLD AS IS. PARTS SWAPPERS PLEASE NOTE THAT WE TAMPER MARK ALL OUR ITEMS. Hover To Enlarge. This is the re-marketing arm of IERC and. As a result, most items that are being sold are not items that we have used internally. We do test the items to the best of our ability and state the known condition as we understand it to be. We do not always have the means to test certain items. Our reputation is very important to us. We do our best to honestly represent all listed items and ship within the designated times whenever possible. Please do not make assumptions as to what may or may ... morenot be included in the auction All items unless otherwise stated are sold as is. Do not hesitate to send us any questions or concerns. ASK before you bid. We will do our best to promptly and fully answer these queries to make your eBay experience with us as pleasant as possible. Items include only what is shown in the pictures and or or stated in the auction. We may occasionally use stock photos on multiple items. We treat our buyers with respect and expect to be treated in a similar fashion. Buyers who are cooperative working through issues should they unfortunately arrise will be treated very well. Please read. Understand and agree to the terms of sale listed below BEFORE you bid on our products. Bidding on any product is considered a bidding agreement that the terms below have been read and agreed to. If you have any questions you must contact us prior to bidding. Unless we have been contacted in advance. There will be NO EXCEPTIONS. Sorry No local pickups. We do not ship to PO Boxes. We ship on your behalf using Canada Post Expedited Service once weekly only. Please deal with the courier directly regarding estimated delivery times. We do not accept returns because the a
|
|
|
APPLIED MOTION PRODUCTS Si5580 PROGRAMMABLE STEP MOTOR DRIVER
APPLIED MOTION PRODUCTS Si5580 PROGRAMMABLE STEP MOTOR DRIVER. factory set for 110 volts.removed working environment. overall good cosmetic condition. multiple order save on postage. paypal.
|
|
|
Q2HB44MA Step Motor Driver 12-40VDC 0.5-4A
Recovered from working industrial machine. Nice condition. 2-phase step motor driver. Operates from 12-40VDC supply. Motor current selectable from 0.5-4.0 Amps. Basic datasheet available at request and one will be shipped with the unit.
|
|
|
150 OZ.IN 200 Step Stepper Motor Superior Electric-Type: M063-LE06E (DUEL SHAFT)
Item is used. I have a 14 day return policy if not satisfied upon delivery. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1438260433e-0xe3-
|
|
|
applied motion products p/n 4023-819 2-phase stepper motor NEMA 23 Step Motor
Part Number 4023-819. Frame Size NEMA 23. Motor Type Standard torque. Part Number w/Double Shaft NA. Part Number w/Encoder NA. Motor Length 1.98 inches. Number of Lead Wires 6. Lead Wire Configurat ion flying leads. No connector. Lead Wire/Cable Length 18 inches. Lead Wire Gauge 22 AWG. Unipolar Holding Torque 53.0 oz-in. Bipolar Holding Torque 74.9 oz-in. Step Angle 1.8 deg. Bipolar Series Current 0.71 A/phase. Bipolar Series Resistance 10.2 Ohms/phase. 2-phase hybrid step motor. Standard NEMA 23 dimensions. The 4023-819 two-phase stepper motor is not available for new applications. Please consider the HT23-593 as a. Replacement. To view all step motors go to the browse stepper motors page. For additional assistance selecting a. Step motor contact us or call 1-800-525-1609. Description. SpecificationsBipolar Series Inductance 32 mH/phase. ... moreBipolar Parallel Current NA. Bipolar Parallel Resistance NA. Bipolar Parallel Inductance NA. Unipolar Current 1.0 A/phase. Unipolar Resistance 5.1 Ohms/phase. Unipolar Inductance 8 mH/phase. Rotor Inert ia 1.56E-03 oz-in-sec2. Integral Gearhead No. Weight 1.25 lbs. Storage Temperature-40 to 70 °C. Operat ing Temperature-10 to 40 °C. Insulat ion Class Class B(130 ºC) Maximum Radial Load NA. Maximum Thrust Load NA. Shaft Run Out 0.001 inch T.I.R. max. Radial Play 0.0004 inch max w/ 1.0 lb load. End Play 0.0004 inch max w/ 2.0 lb load. Perpendicularity 0.003 inches. Concentricity 0.002 inches.
|
|
|
Nema 23 High Torque Step Motor with Encoder and Cover CNC Arduino Electroglas
Nema 23 High Torque Stepper Motor Model: HW23-753 The HW23-753 2-phase stepper motor is suitable for a wide range of motion control applications including we factory environments and outdoor use. Previously owned by Electroglas. Part Number. HW23-753. Frame Size. NEMA 23. Motor Type. High torque. Part Number w/Double Shaft. NA. Part Number w/Encoder. HW23-753D-ZAC. Part Number w/Encoder& Cover. NA. Motor Length. 2.19 inches Number of Lead Wires. 8. Lead Wire Configuration. Shielded cable. No connector. Lead Wire/Cable Length. 10 ft. Lead Wire Gauge. 22 AWG Unipolar Holding Torque. 117 oz-in Bipolar Holding Torque. 153 oz-in Step Angle. 1.8 deg Bipolar Series Current. 0.71 A/phase Bipolar Series Resistance. 14.0 Ohms/phase Bipolar Series Inductance. 51.2 mH/phase Bipolar Parallel Current. 1.41 A/phase Bipolar Parallel Resistance. 3.5 Ohms/phase ... moreBipolar Parallel Inductance. 12.8 mH/phase Unipolar Current. 1.00 A/phase Unipolar Resistance. 7.0 Ohms/phase Unipolar Inductance. 12.8 mH/phase Rotor Inertia. 3.12E-03 oz-in-sec 2 Integral Gearhead. No. Weight. 1.21 lbs Storage Temperature. 30 to 70 °C Operating Temperature. 20 to 50 °C Insulation Class. Class B(130 ºC) Maximum Radial Load. NA. Maximum Thrust Load. NA. Shaft Run Out. 0.002 inch T.I.R. max. Radial Play. 0.0008 inch max w/ 1.1 lb load. End Play. 0.003 inch max w/ 2.2 lb load. Perpendicularity. 0.004 inches Concentricity. 0.003 inches*100% 14-day Money Back Guarantee! Check out our!
|
|
 |