|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$3.00 Shipping Condition: New Location: China The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The DRV8825 features adjustable ... morecurrent limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step).
Buy It Now
$13.95 Shipping Condition: New Location: Hoffman Estates, United States 1pc TinyG 4 axis Board, Current Version TinyG Board. TinyG Main Features 3 pcs NEMA17 Stepper Motor (KL17H248-15-4A) for 3D Printer, 76 oz-in. NEMA17 ... moreStepper Motor (KL17H248-15-4A) for 3D Printer, 76 oz-in.
Buy It Now
$2.80 Shipping Condition: New Location: China On the operation interface, rotate the encoder to adjust the speed, CW key -- forward rotation, CCW key -- reverse rotation, RUN/STOP key -- operation ... morestop exit. Subdivision selection range 1-128 subdivision.
Buy It Now
Free Shipping Condition: New Location: China Note: Do not connect or disconnect a motor while the driver is energized. A3967 microstepping driver. 1PC EasyDriver Shield stepping Stepper Motor Driver ... moreV44 A3967 for Ar-duino. The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
Buy It Now
$2.99 Shipping Condition: New Location: China Description This module is blue PCB now.Please know it. The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping ... morebipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting. Overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) 1）Simple step and direction control interface 2）Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 3）Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates 4）45 V maximum supply voltage 5）Built-in regulator(no external logic voltage supply needed) 6）Can interface directly with 3.3 V and 5 V systems 7）Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout 8）Short-to-ground and shorted-load protection 9）4-layer. 2 oz copper PCB for improved heat dissipation 10）Exposed solderable ground pad below the driver IC on the bottom of the PCB 11）Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver; we therefore recommend careful reading of the DRV8825 datasheet(1MB pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil(see the Power Dissipation Considerations section below for more information) Here are some of the driver’s key
Buy It Now
Free Shipping Condition: New Location: 金东区, China The DRV8825 stepper motor driver carrier is the breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. DRV8825 has adjustable current ... morelimit, overcurrent and overheat protection, and six microstep resolutions (down to 1/32 step).
Buy It Now
$3.00 Shipping Condition: New Location: China The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. We also carry a DRV8824 stepper ... moremotor driver carrier that can serve as a direct substitute for the DRV8825 carrier when using lower-current stepper motors.
Buy It Now
$2.50 Shipping Condition: New Location: China Model: A4988. Breakout board for Allegro’s A4988 DMOS Microstepping Driver with translator. The A4988 interface is an ideal fit for applications where ... morea complex microprocessor is unavailable or is overburdened.
Buy It Now
Free Shipping Condition: New Location: Charlotte, United States A4988 is a complete microstepping motor driver with built-in translator for easy operation. As long as the "step" input inputting one pulse drives the ... moremotor one microstep. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
Buy It Now
Free Shipping Condition: New Location: United States The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip ... morePWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
$2.99 Shipping Condition: New Location: China The A4988 is a DMOS microstepping driver with converter and overcurrent protection that operates bipolar stepper motors in full, half, 1/4, 1/8, and 1/16 ... morestepping modes, with output drive performance up to 35 V and ±2.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China High Performance Microstep Motor DriverEMA2-040D15 for Stepper Motor. Stepper motors and drivers from ENGMATE. It is suitable for driving 2-phase and ... more4-phase hybrid stepping motors, so Nema 8, Nema 11, Nema 14, Nema 16, Nema 17 stepper motor with a 0.21-1.5A current will be suitable.
Buy It Now
Free Shipping Condition: New Location: China The DRV8825 stepper motor driver carrier is the breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. DRV8825 has adjustable current ... morelimit, overcurrent and overheat protection, and six microstep resolutions (down to 1/32 step).
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Stepper Motor Driver is a board for DRV8825 microstepping stepper motor driver. 5 UEETEK DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink ... morefor 3D Printer. - DRV8825 driver board is widely used in 3D printers and small CNC machines.
Buy It Now
Free Shipping Condition: New Location: China Stepper Motor Driver is a board for DRV8825 microstepping stepper motor driver. 5 UEETEK DRV8825 Stepper Motor Driver Module 4-Layer with Mini Sink for ... more3D Printer. - DRV8825 driver board is widely used in 3D printers and small CNC machines.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States A4988 Is a complete microstepping motor driver, With built-in converter, Easy to operate. The product is available in the whole, half, 1/4.1/8 and 1/16. ... moreAs long as it is in" Stepping" Input a pulse in the input, Microstep can drive motor.
Buy It Now
Free Shipping Condition: New Location: China Stepper Motor Driver is a board for DRV8825 microstepping stepper motor driver. 5 UEETEK DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink ... morefor 3D Printer. - DRV8825 driver board is widely used in 3D printers and small CNC machines.
Buy It Now
Free Shipping Condition: New Location: China Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing.
Buy It Now
Free Shipping Condition: New Location: 金东区, China Compatible motor: stepper motor. Motor signal: common cathode. Input reverse polarity protection: yes. Number of reverse pulses: 1-9999999 pulses. Instruction ... morefeatures: streamline and optimize multiple commonly used instructions.
Buy It Now
Free Shipping Condition: New Location: Raleigh, United States A4988 is a complete microstepping motor driver with built-in translator for easy operation. As long as the "step" input inputting one pulse drives the ... moremotor one microstep. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China CNC Router Mill Machine 3 Axis TB6600HG Stepper Driver Board Controller 0.2A-5A More. PCB Instructions& Specifications. This driver board controller ... moreis a high performance microstepping driver board based on the latest original TOSHIBA high-efficiency TB6600HG IC. This driver board controlelr has upgraded their PCB board. The re-designing the PCB board will avoid the TB6600 chip on the board being easily blown as the previous version. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13(45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver Board. High performance. Cost-effective. Automatic idle-current reduction. Supply voltage up to 45V DC. Output current up to 5.0A. Suitable for 2-phase and 4-phase motors. High speed optoelectronic isolation signal input. Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency. 1. 2, 4, 8, 16 adjustable microstep control, motors run more precisely and smoothly. Overload. Overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices. With one 0 ~ 10V PWM Signal output port for speed adjustment and one Relay output port. 5 types of input control in manual control interface. To set Limit. Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc. Suitable for any small-and-medium automatic equipment with CNC controller. Such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices. For advising. Such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc. For processing various pattern mould. Microstep Mode, SW1, SW2, SW3, Outp
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China CNC Kit 4 Axis For Nema17 Nema23 Nema34 Motor 5 Axis Breakout Board TB6600HG 5A + 4 Pieces TB6600HG Stepper Driver Board Controller The latest upgraded ... moresalable 5 axis breakout board is specially designed for the CNC single axis stepper driver controller. Such as TB6600HG, M542, M542H, MA560, MA860H, 2M542, 2M982 etc single axis stepper driver controller. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover. The brand new design with BiCD0.13(45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps. All the 2 Phase or 4 Phase of Nema17. Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver. Click here for In short. With this CNC Kit, you will get more benefits from the Kit on CNC work. Please purchase this kit with confidence. High performance. Cost-effective. Maximum support 5-axis stepper motor driver controller. Two types of ways to get power. 5V DC power supply or USB port to directly get power from PC. Two-stage signal processing. Smooth signal transmission, powerful anti-jamming. 5-input interface to define the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc. Relay output control interface. Accessed by the spindle motor or the air pump, water pump, etc. 5-axis work LED display. Visually display the working condition of the stepper driver controller. High performance. Cost-effective. Automatic idle-current reduction. Supply voltage up to 45V DC. Output current up to 5.0A. Suitable for 2-phase and 4-phase motors. High speed optoelectronic is
Buy It Now
$2.80 Shipping Condition: New Location: China On the operation interface, rotate the encoder to adjust the speed, CW key -- forward rotation, CCW key -- reverse rotation, RUN/STOP key -- operation ... morestop exit. Subdivision selection range 1-128 subdivision.
Buy It Now
Free Shipping Condition: New Location: China Compatible motor: stepper motor. Motor signal: common cathode. Input reverse polarity protection: yes. Speed range: 0.1~999 circles/minute. Instruction ... morefeatures: streamline and optimize multiple commonly used instructions.
Buy It Now
$3.50 Shipping Condition: New Location: China The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The DRV8825 features adjustable ... morecurrent limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step).
Buy It Now
$1.46 Shipping Condition: New Location: 金东区, China
Buy It Now
$3.50 Shipping Condition: New Location: China Camera& DSLR Studio& Video Camera Bag Home& Garden Solar LED Light Plant Grow Light Massager& Health Sporting Goods Other Features: Material: ... moreAluminum Color: Silver Size: Approx. 8.5 x 8.5 x 5mm/0.34 x 0.34 x 0.20inch The Aluminium Heatsink is specially designed for Raspberry Pi The function of heat sink is to cool down the board and make your Raspberry operate better This 8.5 x 8.5 x 5mm heatsink use with the A4988 drivers Heatsink for A4988 StepStick Stepper Motor Driver Module 3D Printer Reprap RAMPS.Etc. Note: This product has no adhesive Package Included: 1 x Heatsink We accept PayPal only, All major credit cards are accepted through our secure payment processor PayPal. Payment must be received within 7 days of auction closing. If you have bought multiple items from me. You can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review. Items will be shipped within 2 business days upon receipt of your payment. Items shipped from China using Airmail. Reach most of the countries within 10 to 20 business days. Delivery time depends on destination. Shipping method(economy or standard) and other factors, it may takes up to 20 business days. Please make sure your address in eBay is correct. If you want to change your address. Please send us ebay message or email as soon as you make the payment. Combining shipment is not allowed. If you wants to combine all the items together. You should still pay for all of the shipping, insurance and handling fees. If this item is defective upon receipt. Customer has up to 14 days from date of receipt for exchange of a new one or asking for a refund. We offer 1 months warranty start from Recieving purchase. For DOA cases, buyer is responsible for returning postage. We care about our valued customers. And are always willing to work things out. If you have any problems, please e-mail
Buy It Now
Free Shipping Condition: New Location: China The DRV8825 stepper motor driver carrier is the breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. DRV8825 has adjustable current ... morelimit, overcurrent and overheat protection, and six microstep resolutions (down to 1/32 step).
Buy It Now
Free Shipping Condition: New Location: China 1x Motor Drive Expansion Board L293D. Up to 4 DC motors with individual speed selection (so, about 0.5% resolution). Because the unpaid dispute will not ... morebe closed automatically, and we may ignore it.
Buy It Now
$20.00 Shipping Condition: New Location: Sacramento, United States The G213V is Geckodrive's toughest drive with a step pulse multiplier, allowing it to run in full step, half step, 5 microstep and 10 microstep modes. ... morePower-on reset. Full step, half step, 5 microstep and 10 microstep selectable resolution.
Buy It Now
$87.67 Shipping Condition: For parts or not working Location: Mountainair, United States The box has a stop button wired in already. Includes Galil ICM 2900 interconnect module. Includes Parker-Compumotor OEM ZL4 microstepping step motor drive. ... moreIncludes cabinet key (as shown). International sales present the greatest regulatory restrictions.
Buy It Now
$20.95 Shipping Condition: New Location: Hoffman Estates, United States Project Artois Crejz Project Artois Crejz 3-Axis NEMA23.34 Stepper Motor Upgrade Kit(1x 906oz/in, 2x570oz/in, 3 Stepper Drivers, etc) 120VAC/230VAC) 2PCS ... more1PCS 2PCS 1PCS 1/2" 12.7mm) or KL34H295-43-8B. 1PCS 1PCS C10(You can update to USB or Ethernet SmoothStepper Motion breakout board) 1PCS- See more at: http:www.automationtechnologiesinc.com/products-page/stepper-nema34-3-axis-kits/3-axis-two-nema23-350oz-in-one-nema34-1125-oz-in-60vdc20a-psu-g320x-gecko-driver-duplicate-2#sthash.D5ieFG7n.dpuf. 3-Axis NEMA23 CNC Kit(36V/9.7A/425oz-in/KL-4030) See more at: http:www.automationtechnologiesinc.com/products-page/stepper-nema23-3-axis-kits/cnc-stepper-motor-3-axis-kit-2#sthash.3fwNMDl9.dpuf. 3-Axis NEMA23 CNC Kit(36V/9.7A/425oz-in/KL-4030) CNC 3 Axis Stepper Motor Kit with 425 oz-in motor and KL-4030 Bipolar Driver with 36V/9.7A Power Supply(110V/220VAC) 3) NEMA23 KL23H286-20-8B. 425 oz-in stepping motors,1/4” dual shaft with a flat) 3) KL- 4030 Micro stepping Driver(3.0Amp 24-40 Volts. 1-1/64) 1) KL-350-36 36V/9.7A 36VDC/ 9.7A Power Supply 110VAC/220VAC(1) C10 6 axis Breakout board.You can update to USB or Ethernet SmoothStepper Motion breakout board) 1) 5V power supply 110VAc/220VAC. More Details: http:www.automationtechnologiesinc.com/products-page/stepper-nema23-3-axis-kits/cnc-stepper-motor-3-axis-kit-2 Orders within the United States are shipped by UPS or Fedex Ground or the US Postal Service(Priority Mail) Which takes 1-5 business days depending on your location in the US. For international orders, please send us an email to quote the shipping fee first. We use USPS or UPS or Fedex to ship. Your order will usually ship within 2-5 business days after you receive an emailed order confirmation from Automation Technologies Inc. Automation Technologies Inc. does not ship to PO boxes. For security reasons we can only ship to your credit card billing address. If you would like us to ship to a different address you will need to call your credit card company and have them add an alternate a
Buy It Now
$2.99 Shipping Condition: New Location: China Description The Big Easy Driver. Designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based on ... morethe Allegro A4988 stepper driver chip. It's the next version of the popular Easy Driver board. Each BigEasyDriver can drive up to about 2A per phase of a bi-polar stepper motor. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 35V. And includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling, a heatsink is recommended for loads approaching 2A/phase. You can find the recommended heatsink in the related items below. Note: The arrow indicators on the current adjustment potentiometer is backwards. Keep this in mind if you're adjusting the current limits. Note: This product is a collaboration with Brian Schmalz. A portion of each sales goes back to them for product support and continued development. Features: Bi-polar Microstepping Driver 2A/Phase Max Max Motor Drive Voltage: 35V On-board 5V/3.3V Regulation Video Demo:http:v.youku.com/v_show/id_XNTgxNjc4MDQw.html Package Included: 1 x The Big Easy Driver Shipping Terms, 1. WORLDWIDE Free SHIPPING. Except China) 2. Orders processed within 24 hours of payment verification. 3. We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address. 4. The images shown are not the actual item and are for your reference only. 5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary. Particularly during the holiday season. 6. If you have not received your shipment within 30 days from payment. Please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 7. Due to stock status and time differences. We will choose to ship your item from our first available warehouse for fast delivery. No Tracking Numb
Buy It Now
Free Shipping Condition: New Location: Denver, United States The DRV8825 stepper motor driver carrier is a breakout board for DRV8825 microstepping bipolar stepper motor driver. The DRV8825 features adjustable current ... morelimiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step).
Buy It Now
Free Shipping Condition: New Location: China welcome to my store. Description The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. ... moreThe module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) Features: Simple step and direction control interface Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step, Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates, 45 V maximum supply voltage, Built-in regulator(no external logic voltage supply needed) Can interface directly with 3.3 V and 5 V systems, Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout, Short-to-ground and shorted-load protection, 4-layer. 2 oz copper PCB for improved heat dissipation, Exposed solderable ground pad below the driver IC on the bottom of the PCB, Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) Package List 5 x Stepper Driver DRV8825. 5 x heatsink, Payment 1.We accept PayPal only. 2.Payment must be received within 7 business days of auction closing.Or a unpaid case will be opened. Delivery details 1.Standard shipping carrier is ePacket with tracking code for United States address.Delivery within 7-14 busienss days. 2.For outside US address.Standard shipping carrier is Hong Kong Post without tracking code,delivery within 25-30
Buy It Now
Free Shipping Condition: New Location: United States DIY CNC Kit 3 Axis With CNC Breakout Board + Cables + TB6600HG Stepper Drivers + 3 Pieces TB6600HG Stepper Driver Board Controller The latest upgraded ... moresalable 5 axis breakout board is specially designed for the CNC single axis stepper driver controller. Such as TB6600HG, M542, M542H, MA560, MA860H, 2M542, 2M982 etc single axis stepper driver controller. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover. The brand new design with BiCD0.13(45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps. All the 2 Phase or 4 Phase of Nema17. Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver. Click here for In short. With this CNC Kit, you will get more benefits from the Kit on CNC work. Please purchase this kit with confidence. High performance. Cost-effective. Maximum support 5-axis stepper motor driver controller. Two types of ways to get power. 5V DC power supply or USB port to directly get power from PC. Two-stage signal processing. Smooth signal transmission, powerful anti-jamming. 5-input interface to define the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc. Relay output control interface. Accessed by the spindle motor or the air pump, water pump, etc. 5-axis work LED display. Visually display the working condition of the stepper driver controller. High performance. Cost-effective. Automatic idle-current reduction. Supply voltage up to 45V DC. Output current up to 5.0A. Suitable for 2-phase and 4-phase motors. High speed optoelectronic iso
Buy It Now
$3.59 Shipping Condition: New Location: China 5pcs EasyDriver Shield stepping Stepper Motor Driver V44 A3967 for Arduino Click to Enlarge Click to Enlarge Description: The EasyDriver is a simple to ... moreuse stepper motor driver. Compatible with anything that can output a digital 0 to 5V pulse(or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver) EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version(v4.4) we fixed the silk error on the min/max adjustment. This is the newest version of EasyDriver V4 co-designed withBrian Schmalz. It provides much more flexibility and control over your stepper motor. When compared to older versions. The microstep select(MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control. Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC. Note: This product is a collaboration with Brian Schmalz. A portion of each sales goes back to them for product support and continued development. Features: A3967 microstepping driver MS1 and MS2 pins broken out to change microstepping resolution to full. Half, quarter and eighth steps(defaults to eighth) Compatible with 4. 6, and 8 wire stepper motors of any voltage Adjustable current control from 150mA/phase to 750mA/phase Power supply range from 7V to 30V. The higher the voltage. The higher the torque at high speeds What's in the package: 5Pcs* EasyDriver Shield stepping Stepper Motor Driver V44 A3967 For Arduino Feedback: 1. If you are satisfied with our goods and service. Please leave us a positive feedback and rate the details of the transaction(Detai
Buy It Now
$5.40 Shipping Condition: New Location: Minneapolis, United States A4988 is a complete microstepping motor driver with built-in translator for easy operation. As long as the "step" input inputting one pulse drives the ... moremotor one microstep. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
Buy It Now
$3.50 Shipping Condition: New Location: China The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The DRV8825 features adjustable ... morecurrent limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step).
Buy It Now
$3.50 Shipping Condition: New Location: China Camera& DSLR Studio& Video Camera Bag Home& Garden Solar LED Light Plant Grow Light Massager& Health Sporting Goods Other Features: Material: ... moreAluminum Color: Silver Size: Approx. 8.5 x 8.5 x 5mm/0.34 x 0.34 x 0.20inch The Aluminium Heatsink is specially designed for Raspberry Pi The function of heat sink is to cool down the board and make your Raspberry operate better This 8.5 x 8.5 x 5mm heatsink use with the A4988 drivers Heatsink for A4988 StepStick Stepper Motor Driver Module 3D Printer Reprap RAMPS.Etc. Note: This product has no adhesive Package Included: 1 x Heatsink We accept PayPal only, All major credit cards are accepted through our secure payment processor PayPal. Payment must be received within 7 days of auction closing. If you have bought multiple items from me. You can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review. Items will be shipped within 2 business days upon receipt of your payment. Items shipped from China using Airmail. Reach most of the countries within 10 to 20 business days. Delivery time depends on destination. Shipping method(economy or standard) and other factors, it may takes up to 20 business days. Please make sure your address in eBay is correct. If you want to change your address. Please send us ebay message or email as soon as you make the payment. Combining shipment is not allowed. If you wants to combine all the items together. You should still pay for all of the shipping, insurance and handling fees. If this item is defective upon receipt. Customer has up to 14 days from date of receipt for exchange of a new one or asking for a refund. We offer 1 months warranty start from Recieving purchase. For DOA cases, buyer is responsible for returning postage. We care about our valued customers. And are always willing to work things out. If you have any problems, please e-mail
Buy It Now
Free Shipping Condition: New Location: China welcome to my store. Description The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. ... moreThe module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) Features: Simple step and direction control interface Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step, Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates, 45 V maximum supply voltage, Built-in regulator(no external logic voltage supply needed) Can interface directly with 3.3 V and 5 V systems, Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout, Short-to-ground and shorted-load protection, 4-layer. 2 oz copper PCB for improved heat dissipation, Exposed solderable ground pad below the driver IC on the bottom of the PCB, Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) Package List 5 x Stepper Driver DRV8825. 5 x heatsink, Payment 1.We accept PayPal only. 2.Payment must be received within 7 business days of auction closing.Or a unpaid case will be opened. Delivery details 1.Standard shipping carrier is ePacket with tracking code for United States address.Delivery within 7-14 busienss days. 2.For outside US address.Standard shipping carrier is Hong Kong Post without tracking code,delivery within 25-30
Buy It Now
$3.59 Shipping Condition: New Location: China Item Description: A3967 microstepping driver Compatible with 4. 6, and 8 wire stepper motors of any voltage Adjustable current control from 150mA/phase ... moreto 750mA/phase Power supply range from 7V to 30V. The higher the voltage. The higher the torque at high speeds MS1 and MS2 pins broken out to change microstepping resolution to full. Half, quarter and eighth steps(defaults to eighth) A simple to use stepper motor driver. Compatible with anything that can output a digital 0 to 5V pulse(or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver) Payment: We only accept orders which are approved by paypal(eCheck Payments are shipped after they clear) We will ship the item(s) to your ebay address. Please comfirm the address before your payment. Shipping: Orders will ship within 1 business days after payment has cleared. Orders from Saturdays. Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-35 days for international deliveries. Some shipments could take longer subject to your local customs authorities. If you can't get your items in time. Please contact us first, we will check and solve it for you asap. Contact Us: All communication is done through EBAY MESSAGES. If you have any questions. Please use the“Contact Seller”or“Ask Seller a Question”link in eBay to e-mail us at any time. We will respond within 1-2 business days. If you don't get response within 2 business days. please kindly send the message again. Due to the weekend or holiday. Sometimes we will have a little delay, please kindly understand us. About Feedback: If you are dissatisfied for any reason. Please donnot be quick to leave negative/neutral feedback. You just need to contact us, we will offer you a good solution. If you are satisfied with our service. Please give us positive comments. Thank you very much!
Buy It Now
$3.59 Shipping Condition: New Location: China 5pcs EasyDriver Shield stepping Stepper Motor Driver V44 A3967 for Arduino Click to Enlarge Click to Enlarge Description: The EasyDriver is a simple to ... moreuse stepper motor driver. Compatible with anything that can output a digital 0 to 5V pulse(or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver) EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version(v4.4) we fixed the silk error on the min/max adjustment. This is the newest version of EasyDriver V4 co-designed withBrian Schmalz. It provides much more flexibility and control over your stepper motor. When compared to older versions. The microstep select(MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control. Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC. Note: This product is a collaboration with Brian Schmalz. A portion of each sales goes back to them for product support and continued development. Features: A3967 microstepping driver MS1 and MS2 pins broken out to change microstepping resolution to full. Half, quarter and eighth steps(defaults to eighth) Compatible with 4. 6, and 8 wire stepper motors of any voltage Adjustable current control from 150mA/phase to 750mA/phase Power supply range from 7V to 30V. The higher the voltage. The higher the torque at high speeds What's in the package: 5Pcs* EasyDriver Shield stepping Stepper Motor Driver V44 A3967 For Arduino Feedback: 1. If you are satisfied with our goods and service. Please leave us a positive feedback and rate the details of the transaction(Detai
Buy It Now
$9.98 Shipping Condition: New Location: Hoffman Estates, United States KL-5056 20-50VDC 5.6A Digital Bipolar Stepper Motor Driver - 32 bit DSP Based Suitable for a wide range of stepping motors of Nema 17,23 and 34, and usable ... morefor various kinds of machines, such as X-Y tables, labeling machines, laser cutters, engraving machines, and pick-placedevices.
Buy It Now
$23.75 Shipping Condition: New Location: Hoffman Estates, United States 3 pcs 270 oz-in stepper motors, NEMA23. NEMA23 270oz/in 2.8A 1/4" Dual Shaft Stepper Motor. This kit contains everything you need for three axis of motion. ... moreMach3 set up for kit and machine, Download here.
Buy It Now
Free Shipping Condition: New Location: 中原区, China The DRV8825 features adjustable current limiting, over current and over temperature protection, and six microstep resolutions (down to 1/32 step). 5 x ... moreDRV8825 Stepper Motor Driver. Module Size, Pinout Interface Match Those Of The A4988 Stepper Driver Carriers In Most Respects.
Buy It Now
$3.00 Shipping Condition: New Location: China The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. We also carry a DRV8824 stepper ... moremotor driver carrier that can serve as a direct substitute for the DRV8825 carrier when using lower-current stepper motors.
Buy It Now
$3.20 Shipping Condition: New Location: China Maybe you also interested it: CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board From Hong Kong. Stepper Motor Drive Controller ... moreBoard Module L298N Dual H Bridge DC For Arduino From Hong Kong. Stepper Motor Drive Module L298N Dual H Bridge DC +28BYJ-48 5V Stepper Motor DC From Hong Kong. Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC For Arduino From Hong Kong. ULN2003AN ULN2003 Stepper Motor Driver Board Module for Arduino AVR ARM SMD L9110S H-bridge Stepper Motor Dual DC motor Driver Controller Board for Arduino From Hong Kong. 28BYJ-48 Valve Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction For Arduino From Hong Kong. 5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase From Hong Kong. Motor Drive Shield Expansion Board L293D For Arduino Duemilanove Mega2560 UNO From Hong Kong. StepStick Stepper motor driver A4988 A4983 3D Printer driver module Reprap Prus From Hong Kong. Item Description: The use chip: original A4988 chip Brief introduction A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full. Half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or mixed decay mode. The converter is the key to the easy implementation of the A4988. In inputting one pulse on the STEP input drives the motor one microstep. No phase sequence tables, high frequency control lines, or complex interfaces to programming. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. Micro-step operation. The chopping control in the A4988 automatically selects the current decay mode(Slow or Mixed) In the mixed decay mode, the device is initially set to fast decay in the part of the fixed off-time, then a slow decay in the rest of the downtime. Mixed-decay current control scheme results in reduced audible motor noise, increased
Buy It Now
$10.00 Shipping Condition: New Location: China CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board, Photo: Description: Features: Working voltage DC 10V-35V. Recommended ... moreto use a switching power supply DC24V power supply. 6N137 high-speed optical coupling. Guarantee high speed without losing step. using the Toshiba TB6560AHQ new original chip with low voltage shutdown. Overheating stop and overcurrent protection circuit to ensure optimal performance. Rated maximum output: ± 3A. Peak 3.5A. for two-phase within 42.57 stepping 3A/ four-phase/ of line four/ six-wire stepper motor, and is not suitable for more than 3A stepper motor. automatic half current function. subdivision: whole step. Half-step, step 1/8, 1/16 step, a maximum of 16 subdivisions. Dimensions: width 50* 75* long high-35(MM) Features similar products: 1. Current grade-by-adjustable to meet your demand for a variety of applications. 2. Semi-automatic flow adjustable. 3 6N137 high-speed optical coupling. Guarantee high speed without losing step. 4. Plate printed setup instructions operation without manual also. 5. Thick teeth radiator, good heat dissipation. Absolutely use Toshiba TB6560AHQ. New original chip, a penalty at ten! Package Contents 100% Brand New 1x TB6560 3A driver board, Shipping: We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback. So that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them! Ship by Post Air-mail within 1 working days after full payment is received. The shipment usually takes 12-35 business days to Worldwide. We also provide international Expressed delivery such as EMS. DHL and UPS,extra shipping fees is needed. The shipping time may vary. Depends on receiver's location. Country Delivery Time Working Days(not including holiday) 5-7 8-10 11-14 15-19 20-22 25 Working Days + Saturday + Sunday 5-9 10-14 15-20 21
Buy It Now
Free Shipping Condition: New Location: China welcome to my store. Description The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. ... moreThe module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) Features: Simple step and direction control interface Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step, Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates, 45 V maximum supply voltage, Built-in regulator(no external logic voltage supply needed) Can interface directly with 3.3 V and 5 V systems, Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout, Short-to-ground and shorted-load protection, 4-layer. 2 oz copper PCB for improved heat dissipation, Exposed solderable ground pad below the driver IC on the bottom of the PCB, Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) Package List 5 x Stepper Driver DRV8825. 5 x heatsink, Payment 1.We accept PayPal only. 2.Payment must be received within 7 business days of auction closing.Or a unpaid case will be opened. Delivery details 1.Standard shipping carrier is ePacket with tracking code for United States address.Delivery within 7-14 busienss days. 2.For outside US address.Standard shipping carrier is Hong Kong Post without tracking code,delivery within 25-30
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: United States 3 Axis DIY CNC Kit For Nema17 Nema23 Nema34 Motor TB6600HG Stepper Drivers 5A + 3 Pieces TB6600HG Stepper Driver Board Controller The latest upgraded ... moresalable 5 axis breakout board is specially designed for the CNC single axis stepper driver controller. Such as TB6600HG, M542, M542H, MA560, MA860H, 2M542, 2M982 etc single axis stepper driver controller. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover. The brand new design with BiCD0.13(45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps. All the 2 Phase or 4 Phase of Nema17. Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver. Click here for In short. With this CNC Kit, you will get more benefits from the Kit on CNC work. Please purchase this kit with confidence. High performance. Cost-effective. Maximum support 5-axis stepper motor driver controller. Two types of ways to get power. 5V DC power supply or USB port to directly get power from PC. Two-stage signal processing. Smooth signal transmission, powerful anti-jamming. 5-input interface to define the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc. Relay output control interface. Accessed by the spindle motor or the air pump, water pump, etc. 5-axis work LED display. Visually display the working condition of the stepper driver controller. High performance. Cost-effective. Automatic idle-current reduction. Supply voltage up to 45V DC. Output current up to 5.0A. Suitable for 2-phase and 4-phase motors. High speed optoelectronic isolation
Buy It Now
$1.39 Shipping Condition: New Location: 金东区, China
Buy It Now
Free Shipping Condition: New Location: 金东区, China The DRV8825 stepper motor driver carrier is the breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. DRV8825 has adjustable current ... morelimit, overcurrent and overheat protection, and six microstep resolutions (down to 1/32 step).
Buy It Now
Free Shipping Condition: New Location: 金东区, China Compatible motor: stepper motor. Motor signal: common cathode. Input reverse polarity protection: yes. Speed range: 0.1~999 circles/minute. Instruction ... morefeatures: streamline and optimize multiple commonly used instructions.
Buy It Now
$2.50 Shipping Condition: New Location: China On the operation interface, rotate the encoder to adjust the speed, CW key -- forward rotation, CCW key -- reverse rotation, RUN/STOP key -- operation ... morestop exit. Subdivision selection range 1-128 subdivision.
Buy It Now
$3.59 Shipping Condition: New Location: China Description: Brand new and high quality. The EasyDriver is a simple to use stepper motor driver. Compatible with anything that can output a digital 0 ... moreto 5V pulse(or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver) MS1 and MS2 pins broken out to change microstepping resolution to full. Half, quarter and eighth steps(defaults to eighth) Compatible with 4. 6, and 8 wire stepper motors of any voltage. Adjustable current control from 150mA/phase to 750mA/phase. Power supply range from 7V to 30V. The higher the voltage. The higher the torque at high speeds. Size: 4.8cm x 2cm. Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC. Package included: 2 PCS x A3967 Stepping Motor Shield Driver WE PROMISE YOU CAN GET THE ITEMS YOU PAID OR REFUND. To USA: Send by e-package. To other countries: Order more than $25. Provide free tracking number. Order less than $25,customer can pay $3 to get a tracking number. We located in the biggest electronic market in China-HQB(Shenzhen) Specialist in ICs over 10 years, we seek to establish long-term business relationships. Real store with large stock ICs. 100% as describe. Best price. Good quality. Can get almost everything at the lowest price*HIT ALL PRICE,14 days NO-QUESTION- RETURN PLEASE BUY WITH CONFIDENCE NEW. GOOD QUALITY, ORIGINAL PACKAGE LARGE STORE AND THE LOWEST PRICE NO-QUESTION-REFUND, FOR LARGE QUANTITY.OFFER BETTER PRICE, ORIGINAL PACKING(TAPE REEL/TUBE/TRAY) we specialize in electronic components. ICs. Capacitors, Diodes, Resistors, LEDs. Transistors. And so on. BRAND:ALTERA, ST, NXP/PILIPS, LINER, MAXIM/DALLAS, NSC. TI/BB, INTERSIL, XILINX. and so on. Especially in Hard To Find Parts. we only sell NEW. ORIGINAL parts. please buy with confidence.We offer NO-QUESTION-REFUND. FEEDBACK We appreciate positive feedback. we always try our best to service our customers.so if you have ant question.PLEASE DON’T HESITATE TO CONTACT US IMMEDIATEDLY, we are always here to offer help
Buy It Now
Free Shipping Condition: New Location: China welcome to my store. Description The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. ... moreThe module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) Features: Simple step and direction control interface Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step, Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates, 45 V maximum supply voltage, Built-in regulator(no external logic voltage supply needed) Can interface directly with 3.3 V and 5 V systems, Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout, Short-to-ground and shorted-load protection, 4-layer. 2 oz copper PCB for improved heat dissipation, Exposed solderable ground pad below the driver IC on the bottom of the PCB, Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) Package List 5 x Stepper Driver DRV8825. 5 x heatsink, Payment 1.We accept PayPal only. 2.Payment must be received within 7 business days of auction closing.Or a unpaid case will be opened. Delivery details 1.Standard shipping carrier is ePacket with tracking code for United States address.Delivery within 7-14 busienss days. 2.For outside US address.Standard shipping carrier is Hong Kong Post without tracking code,delivery within 25-30
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China The M335 is a high performance microstepping driver with low price. The M335 adopts single-chip PWM bipolar sinusoidal chopper to ensure low vibration ... moreand high efficiency. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, so the Nema16, Nema17, Nema23 stepper motors with a 0.5A-3.5A current will be suitable.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China Stepper motors and drivers from ENGMATE. The breakout board using high-performance three-state bus driver 74HC244 and Schmitt inverter 74HC14. The input ... moresignal is amplified, rectified, filtered to make the drive capability of the output signal more stable and stronger.
|
|
|
 |