|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: China Product Name: 1pcs Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for arduino Basic Attributes Name Double H Bridge Motor Driver Module ... moreWorking mode Drived by H bridge(double lines) Control chip L298N? ST? Logical voltage 5V Driving voltage 5V? 35V Logical current 0mA-36mA Driving current 2A(MAX single bridge) Storage temperature? 20? +135? Maximum power 25W weight 30g Periphery dimension 43*43*27mm Product features: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Real figure? L298N is a kind of high voltage.High current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V)large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well. Port function? Circuit principle diagram? This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V. It can enable the on
Buy It Now
$20.00 Shipping Condition: New Location: Sacramento, United States Designed from the ground up to eliminate resonance from stepper motors, the GR214V is in a class above competing products. The GR214V is here! The GR214V ... morecan drive stepper motors ranging from NEMA 8 all the way up to NEMA 42.
Buy It Now
$16.25 Shipping Condition: New Location: Providence Forge, United States Vexta stepper motor drive with controls, requires gearbox and 24VDC 4 amp power.
Buy It Now
Free Shipping Condition: New Location: United States The drive uses a full H-bridge driver module full-bridge MOSFET driver chip and composed with very low internal resistance and high current. MOSFET H-bridge ... moredriver circuit, with strong drive and braking effect, signal isolation chip isolates motor drive effectively.
Buy It Now
Free Shipping Condition: New Location: Tracy, United States Quality L298N chip installed. Chip: L298N (ST NEW). Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. LN298N H-Bridge stepper ... moremotor driver. Double H bridge drive. Drive current: 2A(MAX single bridge).
Buy It Now
$2.99 Shipping Condition: New Location: China Optional PWM generator module. DC motor drive logic truth table Built-in overheating protection circuit (TSD) with hysteresis effect, no need to worry ... moreabout motor stalling;.
Buy It Now
$109.95 Shipping Condition: Used Location: Hawthorne, United States Motion Planner. Pocket Motion Planner. TM or Pocket Motion Planner. EXCELLENT WORKING CONDITION! Active Damping, Electronic Viscosity, and ABS Damping. ... moreIf you need a new/used item with a specific firmware, series.etc. or a large quantity, we probably have it.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Gecko G540 Overview Part 1 Users Manual Breakdown - YouTube. Here's my two overview videos covering the G540 driver. The drives specs are listed under ... morethe videos. How To Change A Fuse, Or A Drive In A Gecko Drive G540 - YouTube.
Buy It Now
$3.20 Shipping Condition: New Location: China It can be used to test servo motor. Support servo motor: Pulse Width 0.5~2.5s. Step 2: Connect servo motor at 2 3Pin black male pins;. Request your understanding! ... moreVCC: It connects to positive pole at servo motor;.
Buy It Now
$19.95 Shipping Condition: New Location: Wheelersburg, United States They have the added filter capacitor on the sense lines. It has the trim pots located closer to the openings. The G540 is a complete 4-axis system which ... moreplugs directly into your computer via the parallel port and to your motors through DB9 connectors.
Buy It Now
Free Shipping Condition: New Location: Edmond, United States 140Pcs U Shape Shield Solderless Breadboard Jumper Cable Wire Kit Arduino Shield. This is a pulse module, which can provide 2.52.5khz--6868 kHz frequency, ... morestepping drive power signal. If you want to change the frequency range, you can change the C46 capacitor.
Buy It Now
$3.75 Shipping Condition: New Location: China If you only need the motor to start and stop, connect to high level to start and low level to stop. High level 2-9V is all right, low level is suspended ... moreor grounded. Powerful protection functions, over-current protection and over-heat protection, all achieve protection by limiting the drive current.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New – Open box Location: Osseo, United States Stepper Drive. Motor Type: Stepper 2-Phase. Motor Current.2-4.8A. your account number during checkout. If you do not have an account No Worries! Office ... moreHours SKU# SB-158873.
Buy It Now
Free Shipping Condition: New Location: China Drive Model: HBS57 (Nema 23, for 57 stepper motor). Details of Stepper Drive HBS57. Details of 57HSE3N 3Nm Motor. Do not disconnect the stepper motors ... morewhile power is applied. FRO: Feed Rate Override.
Buy It Now
$2.99 Shipping Condition: New Location: China Chip L298N. Double H bridge drive. Drive current 2A(MAX single bridge). Storage temperature -20℃ to +135℃. Max power 25W.
Buy It Now
$3.40 Shipping Condition: New Location: China L298N as main chip, ST corporation production. Chip: L298N (ST NEW). Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. ... moreHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Resistors for these motors are also included for the G540. Gecko G540 20AWG 13ft. Pro Shielded Motor Cables (Made With Signal Cable) - YouTube. MythBusted ... moreStepper Motor Accuracy Less Than. 001in! Gecko G540 - YouTube.
Buy It Now
$3.40 Shipping Condition: New Location: China Maybe you also interested it: CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board From Hong Kong. Stepper Motor Drive Controller ... moreBoard Module L298N Dual H Bridge DC For Arduino From Hong Kong. Stepper Motor Drive Module L298N Dual H Bridge DC +28BYJ-48 5V Stepper Motor DC From Hong Kong. Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC For Arduino From Hong Kong. ULN2003AN ULN2003 Stepper Motor Driver Board Module for Arduino AVR ARM SMD L9110S H-bridge Stepper Motor Dual DC motor Driver Controller Board for Arduino From Hong Kong. 28BYJ-48 Valve Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction For Arduino From Hong Kong. 5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase From Hong Kong. Motor Drive Shield Expansion Board L293D For Arduino Duemilanove Mega2560 UNO From Hong Kong. StepStick Stepper motor driver A4988 A4983 3D Printer driver module Reprap Prus From Hong Kong. Item Description: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Specification: 1.Double H bridge drive 2.Chip L298N(ST NEW) 3.Logical voltage 5V 4.Drive voltage 5V-35V 5.Logical current 0mA-36mA 6.Drive current 2A(MAX single bridge) 7.Storage temperature-20 to +135 8.Max power 25W 9.Weight 30g 10.Size:43*43*27mm This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V, it can enable the onboard 5V logic power supply;afterthe power supply.Don't input voltage in the interface+5V power supply.But you can lead the 5V for external use. when ENA enable IN1 IN2 control OUT1 OUT2 wh
Buy It Now
Free Shipping Condition: New Location: Fort Collins, United States A4988 Board Specifications 1x A4988 Expansion Board. 1x A4988 Stepper motor driver module. 1x A4988 Heatsink. Expansion Board Specifications Load short-circuit ... moreprotection. Maximum current per phase: 2A (with cooling).
Buy It Now
$2.99 Shipping Condition: New Location: China Product Name: 1pcs Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for arduino Basic Attributes Name Double H Bridge Motor Driver Module ... moreWorking mode Drived by H bridge(double lines) Control chip L298N? ST? Logical voltage 5V Driving voltage 5V? 35V Logical current 0mA-36mA Driving current 2A(MAX single bridge) Storage temperature? 20? +135? Maximum power 25W weight 30g Periphery dimension 43*43*27mm Product features: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Real figure? L298N is a kind of high voltage.High current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V)large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well. Port function? Circuit principle diagram? This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V. It can enable the on
Buy It Now
Free Shipping Condition: New Location: China Product Name: 1pcs Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for arduino Basic Attributes Name Double H Bridge Motor Driver Module ... moreWorking mode Drived by H bridge(double lines) Control chip L298N? ST? Logical voltage 5V Driving voltage 5V? 35V Logical current 0mA-36mA Driving current 2A(MAX single bridge) Storage temperature? 20? +135? Maximum power 25W weight 30g Periphery dimension 43*43*27mm Product features: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Real figure? L298N is a kind of high voltage.High current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V)large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well. Port function? Circuit principle diagram? This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V. It can enable the on
Buy It Now
Free Shipping Condition: New Location: United States Input: 1-5A Current, Select Drive Stepper Motor. ERR: Red Light, Power, Indicator Light, Power Indicator. Feature: 1. The half- function is a 200ms step ... morepulse, and the driver output current is automatically reduced to 50% of the rated output current to prevent motor heating.
Buy It Now
Free Shipping Condition: New Location: United States F/R:Fiddle the toggle switch on the corresponding side, the motor steering direction can be changed. For the toggle switch, the white part is up and down, ... morethen twang it up and down. For the toggle switch, the white part is horizontal, and the twang horizontally.
Buy It Now
$3.50 Shipping Condition: New Location: China Chip:LMD18200T motor driver chip. LMD18200T chip itself can overheat or overcurrent protection. Maximum output power: 75W. Maximum output current: 3A ... more(instantaneous peak current 6A). The chip used in this product is an H-bridge assembly dedicated to DC motor drive.
Buy It Now
Free Shipping Condition: New Location: United States L298N as main chip, ST corporation production. Chip: L298N (ST NEW). Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. ... more1x ISO WIRING HARNESS stereo radio plug lead loom connector adaptor For Toyota.
Buy It Now
Free Shipping Condition: New Location: United States High-speed Optocoupler DCDC is totally isolated, which really protects your computer. Model: TB6560. It is convenient for you to expand the 5th axis when ... moreyou need 5-axis processing. It has 4 channels of 0.8-3.5A ( value) adjustable current rated output two-phase bipolar stepper motor drive.
Buy It Now
$8.00 Shipping Condition: Used Location: Hollister, United States · Hardware required for key functions to be tested may have been removed after testing (e.g. Hard Drive). F3 = Key Functions Working (Appendix C - Test ... moreand Repair). · A subset of the primary functions of the device that an ordinary user of the device expects to function are verified working through manual or software tests.
Buy It Now
$12.45 Shipping Condition: New – Open box Location: Buford, United States DMA860H is a low‑noise digital stepper motor driver with high efficiency. Product Model: DMA860H. Item Type: Stepper Motor Driver. Motor Interface: A+ ... moreand A- are connected to the positive and negative ends of the A-phase winding of the stepping motor; B+ and B- are connected to the positive and negative ends of the B-phase winding of the stepping motor.
Buy It Now
$15.45 Shipping Condition: New Location: Saint Paul, United States NEW NO BOX.
Buy It Now
$2.98 Shipping Condition: New Location: China It can be used to test servo motor. Support servo motor: Pulse Width 0.5~2.5s. Step 2: Connect servo motor at 2 3Pin black male pins;. Request your understanding! ... moreVCC: It connects to positive pole at servo motor;.
Buy It Now
$2.99 Shipping Condition: New Location: China Type of motor being guided: Phase 4-lead (stepper motors 3-24 V can drive rotation but with different torque). 1Pc x Stepper Motor Adjustable Speed Card ... moreDriver Drive. Speed indicator: 9 levels. Colour: as shown in the picture.
Buy It Now
$39.85 Shipping Condition: New – Open box Location: Hawthorne, United States New out of Box! Microstepping Stepper Indexer Drive. Compumotor 6000 programming language. NUPI – New Unused Previously Installed. 9 Programmable open ... morecollector outputs. Drive Input: 95-132 VAC | 50/60 Hz.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Self-Test: A push button is used on the GR214V to allow for quick in-the-field testing of the drive’s core functionality. If the onboard DIP switch is ... moreused to set phase current the user can adjust a trimpot for holding torque from 0% - 100% current in standby mode.
Buy It Now
$3.59 Shipping Condition: New Location: China Chip L298N. Double H bridge drive. Drive current 2A(MAX single bridge). Storage temperature -20℃ to +135℃. Max power 25W. West Asia/Middle East. Australia/New ... moreZealand. United Kingdom.
Buy It Now
$5.00 Shipping Condition: New Location: Katy, United States Maybe you also interested it: CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board From Hong Kong. Stepper Motor Drive Controller ... moreBoard Module L298N Dual H Bridge DC For Arduino From Hong Kong. Stepper Motor Drive Module L298N Dual H Bridge DC +28BYJ-48 5V Stepper Motor DC From Hong Kong. Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC For Arduino From Hong Kong. ULN2003AN ULN2003 Stepper Motor Driver Board Module for Arduino AVR ARM SMD L9110S H-bridge Stepper Motor Dual DC motor Driver Controller Board for Arduino From Hong Kong. 28BYJ-48 Valve Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction For Arduino From Hong Kong. 5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase From Hong Kong. Motor Drive Shield Expansion Board L293D For Arduino Duemilanove Mega2560 UNO From Hong Kong. StepStick Stepper motor driver A4988 A4983 3D Printer driver module Reprap Prus From Hong Kong. Item Description: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Specification: 1.Double H bridge drive 2.Chip L298N(ST NEW) 3.Logical voltage 5V 4.Drive voltage 5V-35V 5.Logical current 0mA-36mA 6.Drive current 2A(MAX single bridge) 7.Storage temperature-20 to +135 8.Max power 25W 9.Weight 30g 10.Size:43*43*27mm This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V, it can enable the onboard 5V logic power supply;afterthe power supply.Don't input voltage in the interface+5V power supply.But you can lead the 5V for external use. when ENA enable IN1 IN2 control OUT1 OUT2 wh
Buy It Now
$3.40 Shipping Condition: New Location: China Dual DC Stepper Motor Drive Controller Board Module TB6612FNG Replace L298N Description: Description: The TB6612FNG motor driver can control up to two ... moreDC motors at a constant current of 1.2A(3.2A peak) Two input signals(IN1 and IN2) can be used to control the motor in one of four function modes- CW. CCW, short-brake, and stop. The two motor outputs(A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU. Logic supply voltage(VCC) can be in the range of 2.7-5.5VDC. While the motor supply(VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel(or up to 3.2A for a short. Single pulse) Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other. Features: Power supply voltage: VM=15V max. VCC=2.7-5.5V•Output current: Iout=1.2A(average) 3.2A(peak) Standby control to save power•CW/CCW/short brake/stop motor control modes•Built-in thermal shutdown circuit and low voltage detecting circuit•All pins of the TB6612FNG broken out to 0.1" spaced pins•Filtering capacitors on both supply lines Feedback: We will leave 5 Star psitive Feedback after receiving the payment.5 Star Feedback is our life. Please help do not leave a neutral or negative feedback and Low score. Please do contact us to get a better solution! Your understanding will be appriciated! We believe all the problems can be solved if buyer works with us I am a honest seller. Please 100% trust! Your sasifation is our final goal! Our best service will let you 100% satisfy! Hope also to receive your 5 star positive feedback! Note: The economy shipping will be no tracking number. Only have the recording number to prove it sent If you need the track
Buy It Now
Free Shipping Condition: New Location: China Package Content: 4pcs x HBS57 Stepper Motor Drive 4pcs x 57HSE3N 3Nm Motor with 5-meter Motor Cable and 5-meter Encoder Cable 4pcs x 2 core DC Cable for ... moreMotor Driver to Power Supply (Z-Axis) 4pcs x 4 Core Shielded Cable for Motor Driver to Controller (X,Y,A,Z) 4pcs x 4 Pin EDG Through Wall Connector 4pcs x 6 Pin EDG Through Wall Connector 2pcs x 2 Core DC Cable for E-Stop Switch and Controller 3pcs x 2 Core Shielded Cable for Limit Switch Kits (X,Y,Z). 1pcs x UC300 Controller 3pcs x Limit Switch Kits 1pcs x E-Stop Switch1pcs x Mean Well Power Supply 36V 600w 1pcs x Mean Well Power Supply - 24V 50W 1pcs x 12 Row Screw Terminal Block 1pcs x Single Core Hook Up Wire. (Black).
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States This allows the trolley can quickly start can quickly kill the car. The drive uses the full two half-bridge driver chip + low resistance N-channel MOSFET ... morecomponents. Improve power utilization. Can withstand high current overload, the maximum current up to 30A.
Buy It Now
Free Shipping Condition: New Location: United States CNC Router Single One Axis 3.5A TB6560 Stepper Motor Driver Controller Board SKU:A88# Description TB6560AHQ is the stepper motor driver chip. The chip ... moreis highly integrated, simple peripheral circuits. High reliability, and part of the motor 57 for driving stepping motor 86, when the largest segment range from 0 rpm to a speed of 300 rpm. Features* high integration and high reliability of the stepping motor driver* interface with ultra high speed optical isolators* High anti-jamming capability* The maximum drive current of 3.5A( peak) Main function* whole-step. 1/ 2, 1/ 8, 1/ 16 segments. step by step adjustable current 0.5-3A* Automatic overheat protection* Optional automatic semi- flow* Adjustable current decay fourth gear* LED indicates power and working status* Support for offline. Enable. Lock etc. Package list: 1* Single Axis 3A TB6560AHQ Stepper Motor Driver Board NOTE We try our best to make every transaction perfectly, just for winning your F ive-Star rating. If you have any dissatisfaction. Please contact us. We will give you the most satisfactory results. PLEASE don't leave a neutral or negative easily. Shipping Item will be shipped within 24 hours on payment received from Hong Kong using Airmail. Only shipped to buyer's PayPal address. Please confirm with your PayPal address before you bid. Delivery time depends on destination and other factors. It may takes up to 30 business days. Optionally. Express Shipments with tracking service via EMS/DHL/UPS with a quoted delivery time of 5 to 7 business days is also available. Here is the estimated time for your reference only: Country Delivery Time Working Days(not including holiday) 5-7 8-10 11-14 15-19 20-25 30 Working Days + Saturday + Sunday 5-9 10-14 15-20 21-25 26-35 40 United States Rate(item arrived) 9% 50% 21% 13% 7% Refund or Resend United Kingdom Rate(item arrived) 10% 62% 20% 3.5% 4.5% Refund or Resend Australia Rate(item arrived) 23% 50% 13% 8% 6% Refund or Resend Europe(Exclude Russia) Rate(item arrived) 2.5% 2
Buy It Now
$2.99 Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: United States Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
$16.27 Shipping Condition: Used Location: Leander, United States Output: to 75V, 5A continuous, 7A peak. (1) Copley 800-1543 Step Motor Drive. Drives (1) axis. There are minor blemishes on the drive from prior use. ... moreThe motor cable has been cut. Input: 20-75VDC 8A.
Buy It Now
$3.43 Shipping Condition: New Location: China Support servo motor:Pulse Width 0.5s~2.5s ;. MCU STM8S103 Output high precision PWM signal;. Button change work mode;. Support back to function;.
Buy It Now
$3.50 Shipping Condition: New Location: China Product Name: 1pcs Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for arduino Basic Attributes Name Double H Bridge Motor Driver Module ... moreWorking mode Drived by H bridge(double lines) Control chip L298N? ST? Logical voltage 5V Driving voltage 5V? 35V Logical current 0mA-36mA Driving current 2A(MAX single bridge) Storage temperature? 20? +135? Maximum power 25W weight 30g Periphery dimension 43*43*27mm Product features: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Real figure? L298N is a kind of high voltage.High current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V)large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well. Port function? Circuit principle diagram? This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V. It can enable the on
2d 16h 17m 51s 0 bids
$499.99 Now
Free Shipping Condition: New – Open box Location: Vista, United States This power module looks very good. But does not work, when AC120V is applied, the green LED does not light up, and no DC voltage at the output. Input ... moreand output terminal blocks are included.
Buy It Now
Free Shipping Condition: New Location: United States Product Name: 1pcs Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for arduino Basic Attributes Name Double H Bridge Motor Driver Module ... moreWorking mode Drived by H bridge(double lines) Control chip L298N? ST? Logical voltage 5V Driving voltage 5V? 35V Logical current 0mA-36mA Driving current 2A(MAX single bridge) Storage temperature? 20? +135? Maximum power 25W weight 30g Periphery dimension 43*43*27mm Product features: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Real figure? L298N is a kind of high voltage.High current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V)large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well. Port function? Circuit principle diagram? This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V. It can enable the on
Buy It Now
$3.50 Shipping Condition: New Location: China Product Name: 1pcs Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for arduino Basic Attributes Name Double H Bridge Motor Driver Module ... moreWorking mode Drived by H bridge(double lines) Control chip L298N? ST? Logical voltage 5V Driving voltage 5V? 35V Logical current 0mA-36mA Driving current 2A(MAX single bridge) Storage temperature? 20? +135? Maximum power 25W weight 30g Periphery dimension 43*43*27mm Product features: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Real figure? L298N is a kind of high voltage.High current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V)large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well. Port function? Circuit principle diagram? This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V. It can enable the on
Buy It Now
Free Shipping Condition: New Location: China Product Name: 1pcs Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for arduino Basic Attributes Name Double H Bridge Motor Driver Module ... moreWorking mode Drived by H bridge(double lines) Control chip L298N? ST? Logical voltage 5V Driving voltage 5V? 35V Logical current 0mA-36mA Driving current 2A(MAX single bridge) Storage temperature? 20? +135? Maximum power 25W weight 30g Periphery dimension 43*43*27mm Product features: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Real figure? L298N is a kind of high voltage.High current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V)large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well. Port function? Circuit principle diagram? This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V. It can enable the on
Buy It Now
$24.75 Shipping Condition: Used Location: Ripley, United States TOL-O-MATIC 36000038 AXIDYNE MSS MICROSTEPPING CONTROLLER/MOTOR DRIVE -USED-WTY. (A4). PLEASE MESSAGE ME FOR MORE INFORMATION. THANKS, JODY
Buy It Now
$3.00 Shipping Condition: New Location: China New L298N DC Stepper Motor Driver Module Dual H Bridge Control Board for Arduino Description: 1.Using L298N made by ST company as the control chip.The ... moremodule has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Specification: 1.Double H bridge drive 2.Chip L298N(ST NEW) 3.Logical voltage 5V 4.Drive voltage 5V-35V 5.Logical current 0mA-36mA 6.Drive current 2A(MAX single bridge) 7.Storage temperature-20 to +135 8.Max power 25W 9.Weight 30g 10.Size:43*43*27mm Package included: 1x New L298N DC Stepper Motor Driver Module Dual H Bridge Control Board for Arduino(not include the screws) Shipping: Items will be shipped within one business day after payment received. Items are shipped from China using Airmail. Reach most of the countries within 10 to 25 business days. Delivery time depends on destination and other factors. It may takes up to 20 business days. Country Delivery Time Working Days(not including holiday) 5-7 8-11 12-14 15-19 20-22 22 Working Days + Saturday + Sunday 5-9 10-15 16-20 21-25 26-30 31 United States Rate(item arrived) 5.1% 50.1% 29.6% 10.5% 4.7% Refund United Kingdom Rate(item arrived) 9.9% 63.2% 19.1% 3.4% 4.4% Refund Australia Rate(item arrived) 21.4% 50.0% 14.3% 7.2% 7.1% Refund France Rate(item arrived) 10.5% 28.6% 43.8% 10.1% 7.0% Refund Germany Rate(item arrived) 11.1% 22.2% 30.3% 20.9% 15.5% Refund Canada Rate(item arrived) 0.0% 47.1% 31.4% 17.6% 3.9% Refund Spain Rate(item arrived) 3.5% 25.0% 47.9% 12.9% 10.7% Refund Payment: We accept PayPal only. All major credit cards are accepted through secure payment processor PayPal. Payment must be received within 7 days of auction closing. If you
Buy It Now
Free Shipping Condition: New Location: United States The driver board can drive hard disk brushless motors, CD-ROM brushless motors and other micro brushless motor of line 3 or 4 wires without hall sensor. ... more4, Suitable for hard brushless motor, brushless motor drive and other miniature 3-wire or 4-wire brushless motor without hall.
Buy It Now
$2.88 Shipping Condition: New Location: China The DRV8871 device is a brushed-DC motor driver. The DRV8871 device has advanced currentregulation. Stepper Motor, or Other Loads. • Current Regulation ... moreWithout a Sense Resistor. motor startup and stall conditions.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper ... moremotor or two DC motors. Drive current: 2A (MAX single bridge).
Buy It Now
Free Shipping Condition: Used Location: Baroda, United States If you are not able to pick up locally, we are able to get competitive freight quotes as well.
Buy It Now
Free Shipping Condition: New Location: Plainville, United States This L298N Motor Driver Module is a high-power motor driver module for driving DC and Stepper Motors. This module consists of an L298 motor driver IC ... moreand a 78M05 5V regulator. Driver chip: L298N dual H-bridge driver chip.
Buy It Now
$115.95 Shipping Condition: Used Location: Hawthorne, United States Motion Planner. Pocket Motion Planner. TM or Pocket Motion Planner. EXCELLENT WORKING CONDITION! Active Damping, Electronic Viscosity, and ABS Damping. ... moreIf you need a new/used item with a specific firmware, series.etc. or a large quantity, we probably have it.
Buy It Now
$25.96 Shipping Condition: Used Location: Millersburg, United States Lift Tables. Available on select orders within USA lower 48 states. Our mission is to empower industries with the tools and solutions they need to thrive ... morein a dynamic and ever-evolving marketplace. Information and Support.
Buy It Now
$16.40 Shipping Condition: Used Location: Los Gatos, United States This IMS Microlynx 4 MX- CS101-401 is a reliable and high-performance industrial automation and motion control equipment, perfect for businesses in need ... moreof drives and starters. The brand, MX, and model, CS101-401, are both known for their exceptional quality and durability. It is a versatile equipment suitable for a wide range of applications. The product is in great working condition and has been tested to ensure optimal performance. It comes from a trusted seller with a proven track record of delivering high-quality products. It is an excellent investment for any business looking to upgrade its automation and motion control system.
Buy It Now
$14.62 Shipping Condition: Used Location: Sanford, United States The DM Series can be operated in either a position, velocity or torque mode. In the position mode the drive accepts step and direction input. DM Series ... more— Best Accuracy and Repeatability! • Brushless direct drive motor with 10 foot cable.
|
|
|
 |