|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature： Made of high quality casting steel for long life and increased durability. All parts heat treated. 1/2" T-Slot, 3/8-16 stud size, & 1" step block ... morewidth (all standard). Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long. Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder. Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service Quality Assurance For Your Peace Of Mind Package List:.
Buy It Now
$5.99 Shipping Condition: New Location: Minooka, United States Fixture Clamp,1/4"-20,Steel 34CV24. MITEE-BITE PRODUCTS INC 60080. The MITEE-BITE(R) PRODUCTS Uniforce(R) machinable wedge-action clamp is an aluminum/steel ... morecompact clamp with extra material on the clamping jaws that you can custom-machine to conform to the shape of specific workpieces.
Buy It Now
$5.99 Shipping Condition: New Location: Minooka, United States MITEE-BITE PRODUCTS INC 60050. The MITEE-BITE(R) PRODUCTS Uniforce(R) machinable wedge-action clamp is an aluminum/steel compact clamp with extra material ... moreon the clamping jaws that you can custom-machine to conform to the shape of specific workpieces.
Buy It Now
Free Shipping Condition: New Location: Columbia, United States Hold downs works via wedging action against the walls of the miter slot when wedge bolts are drawn upward in countersunk holes when locking knobs are ... moretightened. When properly tightened the hold down produces a tight and secure fit in the miter slot.
Buy It Now
$16.05 Shipping Condition: New Location: Englewood, United States Manufacturer Part Number: 35352. Specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. Available ... morewith extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece.
Buy It Now
$37.70 Shipping Condition: New Location: Ontario, United States The rear tool holder slid assembly consists of the RTS-10-1 base with mounting screws and RTS-10-2 tool holder slide.
Buy It Now
$16.05 Shipping Condition: New Location: Englewood, United States Manufacturer Part Number: 35353. Specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. Available ... morewith extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece.
Buy It Now
$16.05 Shipping Condition: New Location: Englewood, United States Manufacturer Part Number: 35350. Specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. Available ... morewith extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece.
Buy It Now
$16.05 Shipping Condition: New Location: Englewood, United States Manufacturer Part Number: 35351. Specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. Available ... morewith extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece.
Buy It Now
$16.05 Shipping Condition: New Location: Englewood, United States Manufacturer Part Number: 35355. Specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. Available ... morewith extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece.
Buy It Now
$16.05 Shipping Condition: New Location: Englewood, United States Manufacturer Part Number: 35356. Specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. Available ... morewith extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece.
Buy It Now
$16.05 Shipping Condition: New Location: Englewood, United States Manufacturer Part Number: 35357. Specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. Available ... morewith extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece.
Buy It Now
Condition: Used Location: Mountainair, United States Ebay Listing Form- We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- FORKARDT F250 250mm 3-Jaw ... moreCNC Lathe Chuck FEATURES: Partial turn adjsutment/replacement of complete Jaw set, Safe Jaw engagement indicator pin. cylindrical base stand extention, ~2.5" through hole without the base extension. 4000 rpm max, ~170 lbs. 13 by 13 by 11 overall dimensions raw CONDITION: Looks good used. Came out of a working CNC Lathe tooling set. We have pulled it apart and operated it statically. still Sold AS-IS Where-Is, what you see is what you get-IF YOU DON'T SEE IT ITS NOT INCLUDED. All defects, wear and damage, if any, are included in this sale. Purchaser/user/operator take full responsibility for ensuring all maintenance, repair and accessories for safe operation are implemented. We did not get a chuck key with it. CA# 3622 NOTES: packing& shipping is very costly. used& parts- don't commit if. understand item condition. you can make an offer. international is super costly& slow. combined shipping. anything electrical-more restrictions. can't schedule shipping without. delivery takes time. query& purchase response time. we make a mistake now& then. LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, computer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high voltage components, high pressure components, industrial automation components, industrial electrical components, lab& industrial ovens& furnaces, liquid pumps, machine tools, mechanical parts& assemblies, optical parts& assemblies, pneumatics, power supplies, rf radio frequency components, robotics, test and measurement equipment, ultrasonic equipment, vacuum pumps& components, valves and fittings, video components, wire. Cable& shrink t
Buy It Now
$16.05 Shipping Condition: New Location: Englewood, United States Manufacturer Part Number: 35354. Specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. Available ... morewith extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece.
Buy It Now
$16.05 Shipping Condition: New Location: Englewood, United States Manufacturer Part Number: 35358. Specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. Available ... morewith extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece.
Buy It Now
$16.05 Shipping Condition: New Location: Englewood, United States Manufacturer Part Number: 35359. Specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. Available ... morewith extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece.
|
|
|
|
Unique Vintage Long Arm Wedge Locking Gauge
Unique Vintage Long Arm Wedge Locking Gauge Welcome to Auntie Q's Auctions! PLEASE NOTE- Our S&H charges are clearly stated in all of our listings. These charges represent our true costs of securely packaging and shipping the item or items to you. Please consider these charges as part of the cost of purchasing the item from us and therefore take them into consideration when bidding on the item the same way you would take into consideration a buyer's premium or any other supplemental charge associated with the purchase of an item. The S&H charges are in fact part of the cost of purchasing this item from us and should be considered as such. Auntie Q's specializes in estates and items that are fresh to the market! Please add us to your favorites list and visit us often! ESTATE FRESH! This auction is for a: Unique Vintage ... moreLong Arm Wedge Locking Gauge! The gauge is approximately 26 1/2" long! It is in good to very good condition. Please supersize the images to view the condition in detail. A Great Vintage Long Arm Wedge Locking Gauge! PLEASE read our listing in detail. Supersize the listing images to view the condition in better detail, and contact us with any and all questions that you may have. Multiple purchases will be combined for savings on S&H charges. Insurance coverage is included in the S&H charge. Pay Pal payments must have a verified shipping address. Do contact us with any and all questions that you might have! Thank you for viewing Auntie Q’s auctions. Good Luck! if you decide to bid! Please also Visit Auntie Q’s eBay store for more antiques and collectibles. Auntie Q’s specializes in the unique and eclectic!
|
|
|
Beech marking gauge with boxwood locking wedge.
Beech marking gauge with boxwood locking wedge. Beech marking gauge. Fitted with a boxwood locking wedge. Works well. Adjustable up to 10" Fitted with a good long pin. Fence is flat one side and round the other side. Payment to be received within 7 days. Unless you request us to hold the item for you. If you would like us to hold the item more than 7 days we would prefer you to pay(without postage) PLEASE DO NOT ASK FOR THE CORRECT POSTAGE. The correct postage is shown automatically on your screen depending upon where you are. We always combine lots for the cheapest postage, if you win more than one lot, it will normally be reassessed and invoiced on Monday. Items are posted within 2 working days of payment. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-143f05344be-0xdc-
|
|
|
Old antique marking gauge with boxwood locking wedge.
Old antique marking gauge with boxwood locking wedge. This auction is for:Old antique marking gauge with boxwood locking wedge.9' See pictures for condition.used.locking not original. PAYMENT:PAYMENT SHOULD BE MADE WITHIN 4DAYS OF CLOSE OF AUCTION.IF THERE IS A PROBLEM PLEASE LET ME KNOW.WE WORK THINGS OUT.ANY QUESTIONS PLEASE EMAIL. SI VOUS AVEZ DES QUESTIONS EN FRANÇAIS,PAS DE PROBLÈME. I DO NOT SEND PARCELS IN OTHER COUNTRIES(EXCEPT CANADA AND USA)BY SURFACE MAIL ONLY AIR MAIL.NO EXCEPTIONS*SO BEFORE YOU BID ON A ITEM,REQUIRED THE COST OF SHIPPING BY AIR,COSTS CAN BE VERY HIGH BY WEIGHT AND SIZE OF PARCEL.SHIPPING TO US BY SURFACE IS 2 AT 3 WEEKS, SAVE MONEY COMBINE SHIPPING I am not responsable for postal service transit time,transit time are provided by the carrier and may vary with package destination,and surface delivery,the ... moretime delivery exclude weekends and holidays, Shipping time for surface are as follows: US/ 1-3 weeks,UK 4 at 6 weeks,Europe/Australia 8 at 12 weeks,We can assure you that air transit is far superior to surface,and the cost is generally only slightly higher.
|
|
|
VINTAGE 'F' CLAMP IRON ? - BLACKSMITH ? WEDGE LOCKING 14.5'' Unusual
Unusual Vintage'F' Clamp tool 14.5' long which opens to 5 1/4' weighing 1.6 kg It Locks with a wedge arrangement and I think it may be made of Iron? I am not sure who would have used it. Possibly a blacksmith. It has been de rusted and wire brushed clean I will ship this item worldwide
|
|
|
TWO Custom Built Locking Wedge-shaped Retail Pandora Jewelry Display Cases
In the Spotlight Due to the size& weight of this item. They are available for local pickup only in Frankenmuth, Michigan For your consideration are these TWO used Custom Built Wedge-shaped Retail Display Cases for Pandora Jewelry in excellent used condition as follows: Used Custom built three years ago to Pandora specifications(including paint color) Compatible with all Pandora retail showcases 40” tall Front measures 20” wide and tapers to 6” at the back; sides measure 21 ½” Top display portion is 13” tall 3/8” thick glass top with ¼” thick door Door locks securely; key provided Bottom portion is sealed and hollow 4” tall x 2 ¾” deep overhang in the front only Pandora(dove) white with silver-tone hardware Similar Pandora showcases sell for $1200 each new Excellent used condition– Extremely well cared for; minor scuffing ... moreon the bottom portion; no other signs of age. Use or abuse Click to view supersized image Click to view supersized image Other Selections Please Check My Store for items not listed in auctions. We are continuing to purge our home of 30 years of stuff that we no longer use or need. And I am now adding new purchases and items acquired on a consignment basis. Pay particular attention to the positive Feedback I have been getting as a seller. I take customer service very seriously which means I am committed to: Provide detailed& honest descriptions Package items well Cheerfully respond in a timely manner to questions Ship promptly Add me to your Favorite Sellers and check frequently for additional items. You can also find me by typing http:stores.ebay.com/CyberSeller in the address field of your browser. Shipping& FREE Pickup Unless otherwise specified in a listing. I try to offer several shipping options. If you choose"parcel post" or“media mail” keep in mind that, while they tend to be less expensive, they may take a bit longer– 9 days and 15 days, respectively. If you are interested in more than one of the items I am selling, I am almost always open to combined
|
|
|
SCHWINN PRE WAR GOOSENECK WITH AS LOCKING WEDGE BOLT RECHROMED #920
UP FOR AUCTION IS A SCHWINN PRE WAR GOOSENECK WIIT A( AS) LOCKING WEDGE BOLT. IT HAVE ALL BEEN RECHROMED COPPER. NICKLE, CHROME, COLOR BUFFED. THERE IS SOME PITTING AT THE LOWER END OF THE NECK, IT IS COVERED BY THE FORK TUBE WHEN IN PLACE. PLEASE LOOK AT ALL THE PICTURES. IF YOU HAVE ANY QUESTIONS PLEASE EMAIL US. SHIPPING TO ALL 50 STATES AND PR. NO RESERVE
|
|
|
CINELLI A-1 'INTERNAL LOCKING' WEDGE VINTAGE ALLOY ROAD STEM /100mm EXT
CINELLI A-1'INTERNAL LOCKING' WEDGE VINTAGE ALLOY ROAD STEM/100mm EXT USED VINTAGE A-1 CINELLI HANDLE STEM 100mm EXT. 3 DEGREE DROP(stem clamp dia. 26.0mm) USES THE INTERNAL LOCKING WEDGE FOR THE HANDLE BARS. STEM FITS 1” 22.2mm) FORK STEERER TUBES. WEIGHT: 255gm(9oz) NO DAMAGE.SOME QUILL MARKS.ALL IS INTACT. WHAT YOU SEE IS WHAT YOU ARE BUYING. THE PICTURES WILL SHOW ITS CONDITION. THIS ITEM IS FROM MY SURPLUS OF ROAD INVENTORY. YOU ARE BUYING THIS HANDLEBAR STEM“AS-IS NO RETURN POLICY” PLEASE ASK QUESTIONS BEFORE(not after) BIDDING IF YOU DO NOT UNDERSTAND SOMETHING. CHECK OUT MY OTHER AUCTIONS AND MY 100% FEEDBACK. BID WITH CONFIDENCE! Detailed item info/Product Information) Product Identifiers: Brand.Cinelli Model.A-1 Alloy 100mm/ Internal locking wedge Size.100mm-3 deg/ 26.0 stem clamp MPN.NA Miscellaneous.Additional Features: ... moreAnodized alloy material PLEASE READ! This item is not Returnable. Auction open to Continental USA bidders. Item condition as represented by eBay pictures. More pictures available upon request. If you should have any questions. Please send them before(not after) you bid. You are responsible for knowing what you need. Timely payment by PayPal is expected by all winning bidders. Item will be professionally packaged and shipped with in 2 business days upon receipt of payment( not counting weekends) BUY-IT-NOW OFFERS: No“ Buy It Now” offer. I am wanting to sell to the highest bidder and give everyone a chance to win this auction. No"outside-eBay" offers please. SHIPPING: Shipping is to PayPal addresses only. If you need it shipped to another address please change your PayPal account address prior to purchasing. If you want your item FAST mention it. I will ship faster if you pay the upgrade amount for Expedited Service. I will ship within 2 business days of receiving cleared payment. Also let me know if the item you received was not what you expected, we can always work something out with good communication. I do my best to describe
|
|
|
Meade LX90 LX200 SCT Wedge / tripod main Locking Knob
The above images are of the actual item you will receive and are professionally shot by ENS Optical Ltd unless stated in the description. As a seller we are forced to use eBay's item specifics. These are usually incorrect. Please use OUR title, description and pictures. E&OE. A useful adapter at a great price_gsrx_vers_566(GS 6.7.1(566)
|
|
|
Japanese Arisaka Type 2 II Paratrooper barrel locking wedge complete assmebly
You are bidding on a complete barrel locking wedge assembly for an Arisaka type 2 paratrooper rifle in 7.7 cal. The part is in very good condition. Please ask questions and look at my other parts auctions. I will combine shipping. U.S. sales only items should be paid for in 5 days.
|
|
|
LEGO: Hinge Wedge 1 x 2 x 1 Locking w/2 Fingers (#41529) Choose Your Color
LEGO Parts Hinge Wedge 1 x 2 x 1 Locking with 2 Fingers. 2 Studs, Clip(Part#41529) Choose Your Color Description IN A GOOD. CLEAN. PLAYED WITH CONDITION NOTE: BACK DISPLAY NOT INCLUDED IN SALE Shipping& Payment Terms PAYMENT MUST BE RECEIVED WITHIN 7 DAYS We accept PayPal only and we will ship within one business day after confirmation of payment. Note: If buying multiple items. Please ask or wait for an invoice from us before paying. We normally only ship using U.S. First Class Postal Service(Parcel Post if over 13 ounces) and always supply Tracking Numbers so you can track your package. International Customers We ship Worldwide and we have included the item’s weight for calculation. When we contact the buyer. We will verify the shipping price for USPS Airmail Shipping, Please Note: Import duties. Taxes, and charges are not included ... morein the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. RETURN POLICY We will only accept returned goods within 14 days that do not meet with description. Purchases will be wrapped to the best of our ability for safe delivery. Return shipping costs responsibility of buyer. 100% Customer Satisfaction Guaranteed.
|
|
 |