|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1.Description This Three-jaw Chuck Is Widely Used in Most of the Lathes on the Market. It Has High Wear Resistance, High Quality, Fine Workmanship, and ... morea Large Clamping Range. It Can Be Praised As the Fine Product of Lathe Accessories. 2.What's Included? 1 X Wp300 Welding Table Chuck 3.Features&Highlights High Wear Resistance: It Uses Stainless Steel, so It Is More Durable and Wear-resistant than the Palstic Material. High-quality Material: It Uses High-strength Steel, Clamping with Strength and It Is Not Slippery, so It Will Improve Work Efficiency. Large Clamping Range: the Jaws Can Be Adjusted at Will to Fit a Wide Range of Blank Sizes. Great Accuracy: the Workmanship Is Demanding. We Used the Latest Technology to Manufacture This Product, so the Workmanship Is More Refined. We Wi.
Buy It Now
Free Shipping Condition: New Location: United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
$18.26 Shipping Condition: Used Location: Klamath Falls, United States After placing them they can adjust 360 degrees on the plate they are mounted to (see attached video). Also the roller (on top center) and the super slick ... moreHDPE top help align even the heaviest work piece before retracting automatically as vacuum is applied to work piece.
Buy It Now
$44.00 Shipping Condition: Used Location: Amityville, United States Weighs 16 lb.
Buy It Now
$40.00 Shipping Condition: New Location: Saint Charles, United States COMPACT MACHINE SLIDE TABLE BRAND NEW! SUPER NICE! GREAT FOR MILLS. DRILLS, PRESSES, BRIDGEPORT! 202-2301. 0.100 per dial revolution, Table: 5-1/2 x 12" ... moreHeight: 4-1/2" Travel: 8" Longitudinal. 5" Transverse, Base: 8 x 9" oval, T-slots for up 5/8" Bolts on 7-3/4 to 8-1/2" bolt circle, T-slot: 5/8" Precision machined and ground table, Dovetails ways and graduated dials, We have other tables and angle plates& clamping kits available at: Email: DISCOUNTMACHINE@AOL.COM SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept: VISA. Master, Discover, American Express, PayPal Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States T1247 7" x 5" Angle Table with Swivel Base. Table size is 7" x 5".
Buy It Now
$72.34 Shipping Condition: New Location: Saint Charles, United States MACHINING TABLE CATEGORY Milling, Drilling & Slide Tables. TABLE LENGTH 18-1/2. TABLE HEIGHT5. BASE LENGTH10-1/2. BASE WIDTH8. Table surface hardness: ... more20 HRC. Base: 8 x 10-1/2" with t-slots for bolts up to 5/8".
Buy It Now
$17.99 Shipping Condition: Used Location: Lombard, United States Nice shape, used condition with dings and scratches. Please see photos for details. Thanks for looking
Buy It Now
Free Shipping Condition: New Location: Exeter, United States (1) Table-Pod with 7in. Single Sided Aluminum Vacuum Pod Clamp. All sides of pods are surfaced for flatness. --Great tool idea, you can make the clamping ... moretools of your dreams. Check out all our other vacuum clamping products for more ideas!
Buy It Now
Free Shipping Condition: New Location: Exeter, United States All sides of pods are surfaced for flatness. --Great tool idea, you can make the clamping tools of your dreams. (1) Table-Pod with 5in. Check out all ... moreour other vacuum clamping products for more ideas!
Buy It Now
Free Shipping Condition: New Location: Exeter, United States All sides of pods are surfaced for flatness. (1) Table-Pod with 6in. --Great tool idea, you can make the clamping tools of your dreams. Check out all ... moreour other vacuum clamping products for more ideas!
Buy It Now
$184.20 Shipping Condition: New Location: Madison Heights, United States 15x10" Adjustable Angle Plates, tilting worktable ,45 degree adjustable to both sides. Heavy duty and sturdy construction. Machined 3/4" table slots.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1.Description This Three-jaw Chuck Is Widely Used in Most of the Lathes on the Market. It Has High Wear Resistance, High Quality, Fine Workmanship, and ... morea Large Clamping Range. It Can Be Praised As the Fine Product of Lathe Accessories. 2.What's Included? 1 X Wp300 Welding Table Chuck 3.Features&Highlights High Wear Resistance: It Uses Stainless Steel, so It Is More Durable and Wear-resistant than the Palstic Material. High-quality Material: It Uses High-strength Steel, Clamping with Strength and It Is Not Slippery, so It Will Improve Work Efficiency. Large Clamping Range: the Jaws Can Be Adjusted at Will to Fit a Wide Range of Blank Sizes. Great Accuracy: the Workmanship Is Demanding. We Used the Latest Technology to Manufacture This Product, so the Workmanship Is More Refined. We Wi.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 1 X WP300 Welding Table Chuck. Model: WP300. Wide Application : The welding turntable chuck has a small design and may be used on a welding positioner. ... moreReversible Jaws : Equipped with a set of reversible jaws.
Buy It Now
$15.00 Shipping Condition: New Location: Port Washington, United States Clamping Area: 200 x 120 mm. 6 mm surrounding clamping base. grid vacuum table VT2012 R. Grid: 20 mm. Ready to use. Just mount, connect the vacuum and ... moreyou´re ready to go. Vacuum points: 1. 1x vacuum table VT2012R.
Buy It Now
$24.99 Shipping Condition: Used Location: Lombard, United States Used condition with dings dents and scratches. Please see photos for details. Thanks for looking Shipping price to the lower 48 only
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Weight: 1kg Product size: 21*14*6cm Material: Copper, 45# steel Screw thread: 1/2-13 Application: 5/8 T-slot Purpose: tighten the ... moreworkpiece to be processed on the T-slot table Features:Tighten the workpiece from the side to facilitate top surface machining Packing list: 6 eccentric bolts + 4 T-nuts + 6 hex stoppers + 2 hex wrenches.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Weight: 1kg Product size: 21*14*6cm Material: Copper, 45# steel Screw thread: 1/2-13 Application: 5/8 T-slot Purpose: tighten the ... moreworkpiece to be processed on the T-slot table Features:Tighten the workpiece from the side to facilitate top surface machining Packing list: 6 eccentric bolts + 4 T-nuts + 6 hex stoppers + 2 hex wrenches.
Buy It Now
$12.45 Shipping Condition: New Location: Redlands, United States Used Parlec CAT 40 TG100 Collet Chuck C40-10SC3 With Haas Style Pull& Spanner Wrench Item is used but fully functional and may contain markings. Scratches, ... morenicks, dings, rust, or discolorations not shown in the specific angles of the photos. The photos are of the actual item you will receive. Used Parlec CAT 40 TG100 Collet Chuck C40-10SC3 With Haas Style Pull& Spanner Wrench C omes as shown in the photos. See my other CAT 40 listings. And SAVE on shipping. I can combine shipping up to 6 of these CAT 40 tool holders in one Priority Mail flat rate box for $12.50 total. I will send a combined shipping invoice. See General Information/Terms and Conditions listed below for details. After purchasing. Pay instantly with PayPal! Credit cards and eChecks are also accepted through PayPal! General Information/Terms and Conditions Product Description: Please see the individual auction for item specific details. The buyer is responsible for the item installation/use and any liability associated with it. Shipping Charges: The shipping charges are listed on the individual auction and are based on the mailing weight of each item. Combined shipping discounts are available for multiple purchases. Please see the listing for details. Payments: Payments must be received within 3 days of the auction closing. The accepted payment methods are: PayPal. credit cards and eChecks through PayPal. All payments must clear before the item ships. If a payment problem should arise, please contact me to work something out and avoid an unpaid item dispute. If no payment or response has been received even after being sent a few invoice or message reminders. The non-paying buyer will be reported to Ebay. Communications: Please ask any questions or communicate through the Ebay messages. The messages are checked periodically and responded to as promptly as possible. For shipments. You may also receive a separate email from Ebay or PayPal confirming your package shipment with a delivery confirmation number. Please c
Buy It Now
$15.70 Shipping Condition: Used Location: Deer Park, United States We're not just about products; we're about spreading good vibes! Join our community of positivity enthusiasts by sharing your thoughts and experiences. ... moreWe're thrilled to have you here! Your eagerness is our priority!
Buy It Now
$19.00 Shipping Condition: New Location: Schaumburg, United States 7 x 10" Tilting Table Normal 0 false false false EN-US ZH-CN X-NONE Brand New Cast iron heavy duty construction. 0- 90° range(45° each ... moreway) 7 x 10" Ground working surface Height 5" T-slots 3/16" Number of T-slot: 3 Supplied complete with crank handle Settings locked by 2 screws Graduated in degrees for quick setting Weight: 32 lbs. Normal 0 false false false EN-US ZH-CN X-NONE Payment: Paypal is preferred. We also accept VISA. MasterCard, AMEX and Discover. Return: Upon receipt. If found defective, please contact us. we will arrange the return or credit Shipping: Will ship out within 24 hours by UPS
Buy It Now
$7.75 Shipping Condition: New Location: Huntington Beach, United States T-Slot: 5/8", Tread: 1/2"-13. Our Part # 50008314. Fits all T-Slotted tables of the correct size including Bridgeport.
Buy It Now
$3.95 Shipping Condition: New Location: Hanover Park, United States 5/8 TABLE SLOT--- 1/2-13 THREAD. -----T-SLOT NUTS----. PRICE IS FOR SET OF TWO NUTS.
Buy It Now
$18.40 Shipping Condition: Used Location: Tewksbury, United States For sale is a used Palmgren 6x6 Tilting Table Fixture #8256, in good usable condition, dirty/tarnished from age/use.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States Adjustable 0° table stop.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States
Buy It Now
$19.00 Shipping Condition: New Location: Chino, United States Clamping range is up to 2-1/16". Clamping width is 1-5/8". 1/2" Adjustable Milling Machine Table Clamp Assembly. One piece assembly allows quick set-up ... moreon mill tables with t-slot. Attached brass shims protect machine table and work piece.
Buy It Now
Free Shipping Condition: New Location: Rohini Sector-7 S.O, India GRAIN CASTE IRON TILTING TABLE FOR MILLING MACHINE. QUALITY TILTING TABLE FOR. MILLING MACHINE-. SIZE 5" X 7"/ 125 X 175 MM. FEATURES TO TILT 45- 0-45 ... moreDEGREES. ENGINEERING TOOLS(5" x 7"/125 x 175mm).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Wp300 Wp-300 300Mm Shank Chuck Welding Clamping Chuck Welding Positioner Chuck. 1 X WP300 Welding Table Chuck. Model: WP300. Wide Application : The welding ... moreturntable chuck has a small design and may be used on a welding positioner.
Buy It Now
$9.00 Shipping Condition: New Location: Chino, United States OT-WMT-410 Description This three-jaw chuck is widely used in most of the lathes on the market. It has high wear resistance, high quality, fine workmanship, ... moreand a large clamping range. It can be praised as the fine product of lathe accessories. Key Features High Wear Resistance: It uses stainless steel, so it is more durable and wear-resistant than the palstic material. High-quality Material: It uses high-strength steel, clamping with strength and it is not slippery, so it will improve work efficiency. Large Clamping Range: The jaws can be adjusted at will to fit a wide range of blank sizes. Great Accuracy: The workmanship is demanding. We used the latest technology to manufacture this product, so the workmanship is more refined. We will work on every millimeter to ensur.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description This three-jaw chuck is widely used in most of the lathes on the market. It has high wear resistance, high quality, fine workmanship, and ... morea large clamping range. It can be praised as the fine product of lathe accessories. Key Features High Wear Resistance: It uses stainless steel, so it is more durable and wear-resistant than the palstic material. High-quality Material: It uses high-strength steel, clamping with strength and it is not slippery, so it will improve work efficiency. Large Clamping Range: The jaws can be adjusted at will to fit a wide range of blank sizes. Great Accuracy: The workmanship is demanding. We used the latest technology to manufacture this product, so the workmanship is more refined. We will work on every millimeter to ensure that it.
Buy It Now
Free Shipping Condition: New Location: Zanesville, United States (4) 7/8" hex 5/8" 1/2-13 thread spherical mounting face with female mating washer. All hardened.
Buy It Now
$7.99 Shipping Condition: New Location: Granville, United States These are for 1/4"-20 tables. All bolts are Stainless steel for smooth repeated use. 10 x 1.5" SS bolts.
Buy It Now
$55.00 Shipping Condition: Used Location: Unionville, United States
Buy It Now
Free Shipping Condition: New Location: Columbia, United States This set of small featherboards will work well on vertical fences or flat on a table surface. Overall sizes are 7-1/2” wide by 3” tall and 1/2” thick. ... moreOverall sizes are 7-1/2” wide by 3” tall and 1/2” thick.
Buy It Now
Condition: Used Location: Muskegon, United States 23" x 67" T Slotted layout Tables, App 5" Tall. This table was not removed from the machine in a manner that would be conducive to re-installation. This ... moreitem was removed from aWorking Machine, and is being.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Weight: 1kg Product size: 21*14*6cm Material: Copper, 45# steel Screw thread: 1/2-13 Application: 5/8 T-slot Purpose: tighten the ... moreworkpiece to be processed on the T-slot table Features:Tighten the workpiece from the side to facilitate top surface machining Packing list: 6 eccentric bolts + 4 T-nuts + 6 hex stoppers + 2 hex wrenches.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Wide Application : The welding turntable chuck has a small design and may be used on a welding positioner. Reversible Jaws : Equipped with a set of reversible ... morejaws. By mounting the jaws in two ways, they will perform as either internal or external jaws.
Buy It Now
$15.00 Shipping Condition: New Location: Port Washington, United States Clamping Area: 200 x 200 mm. 6 mm surrounding clamping base. grid vacuum table VT2020R. Grid: 20 mm. Ready to use. Just mount, connect the vacuum and ... moreyou´re ready to go. Vacuum points: 2. 1x vacuum table VT2020R.
Buy It Now
$400.00 Shipping Condition: New – Open box Location: Saint Louis, United States Minimum Tilt Angle (Degrees ): 0.00. Maximum Tilt Angle ( Degrees): +90.00. Angle Table. Type: Angle Table. WE STAND BEHIND OUR PRODUCTS.
Buy It Now
Free Shipping Condition: New Location: Elgin, United States Compatible with the majority of drill press tables on the market (including the WEN 4208, 4210, 4212, 4214, and 4225 drill presses). Fastens easily to ... moredrill press table slots.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1.Description This Three-jaw Chuck Is Widely Used in Most of the Lathes on the Market. It Has High Wear Resistance, High Quality, Fine Workmanship, and ... morea Large Clamping Range. It Can Be Praised As the Fine Product of Lathe Accessories. 2.What's Included? 1 X Wp300 Welding Table Chuck 3.Features&Highlights High Wear Resistance: It Uses Stainless Steel, so It Is More Durable and Wear-resistant than the Palstic Material. High-quality Material: It Uses High-strength Steel, Clamping with Strength and It Is Not Slippery, so It Will Improve Work Efficiency. Large Clamping Range: the Jaws Can Be Adjusted at Will to Fit a Wide Range of Blank Sizes. Great Accuracy: the Workmanship Is Demanding. We Used the Latest Technology to Manufacture This Product, so the Workmanship Is More Refined. We Wi.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States 1/2- 13" PIVOT CLAMP CLAMPING FOR 5/8" T-SLOT BRIDGEPORT MILLING BORING NEW 202-4810. Table T Slot Size: 5/8" Stud Thread: 1/2'13, ... moreStud Overall Length: 4-1/2" Clamp Width: 1-3/4" Max Clamping Capacity: Up to 3" Load Limit: 13.000 lbs, Fast Set-up, Instant height adjustment without blocks or shims The body of the clamp is formed by forge steel. A brass spacer is mounted on the end to prevent the work piece from damage, Supplied in pairs, 2 T slot nuts, 2 flange nuts, 2 springs, 2 clamping studs, 2 hold down clamp body, All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Please direct any questions to our eBay Message Box. SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shippment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept: VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 1 X WP300 Welding Table Chuck. Model: WP300. Wide Application : The welding turntable chuck has a small design and may be used on a welding positioner. ... moreReversible Jaws : Equipped with a set of reversible jaws.
Buy It Now
$5.45 Shipping Condition: New Location: Lodi, United States Fits many Machines like- HAAS, OKUMA, MAZAK, HURCO, FADAL, BRIDGEPORT. vise keys are used to align your vise to your milling machine table. You can set ... morea vise on your machine table and have it aligned automatically within 0.003".
Buy It Now
$6.05 Shipping Condition: New Location: Lodi, United States Fits many Machines like- HAAS, HURCO, FADAL, BRIDGEPORT. Vise keys are used to align your vise to your milling machine table. You can set a vise on your ... moremachine table and have it aligned automatically within 0.003".
Buy It Now
$19.99 Shipping Condition: Used Location: Escondido, United States This Cnc Vacuum Table T5 Fal is a top-notch workholding tool suitable for business and industrial use. Its high-quality material guarantees durability ... moreand long-term use. This item is ideal for CNC, metalworking, and manufacturing applications, especially for those who need other workholding accessories to complete their projects. The brand of this vacuum table is CNC, which focuses on providing reliable and efficient workholding solutions. You can trust the craftsmanship of this table, and it will surely help you get the job done. Get your hands on this top-of-the-line Cnc Vacuum Table T5 Fal today and experience its excellence.
Buy It Now
Free Shipping Condition: Used Location: Hartville, United States Pro Vertical Set includes a Featherboard, a pair of Vertical Supports, and 4 Risers.
Buy It Now
$29.84 Shipping Condition: New Location: Saint Charles, United States SHARS New Power Table Feed Fits Bridgeport Acer Mills Z Axis 150LBS Reg.USD$ 589.00 202-2214. Z traverse(Knee Travel) Torque: 150in-lb peak/ 119in-lb ... morecontinuous Feed rate: 0.4 to 37.4 IPM, Speed: 0-210 RPM Horsepower: 1-3HP, For 5/8" shaft with keyway, Shars Model# APZ150, For mounting on manual mill that has a 5/8 shaft with key way. Mounting adapter(shown below) included Shars APZ150 power feed uses a full wave Compound DC Motor which takes advantage of both Shunt-wound DC motor(high initial starting torque) and Series-wound DC motor(constant ratio between speed and torque) technology to generate stable feed rates resulting in minimized cutting vibrations. A smoother finish on the work piece, an even, low speed, and longer cutting tool life. The other import brand power feeds use Series-wound DC motors for their simple design structure and low cost. Shars APZ150 power feed uses a Compound DC motor which is more stable while in high speed cutting environments and results in better cutting tool life and surface finish on work piece. Other import brand's power feeds use series DC motors which lose torque as speed increases. Generating excessive vibration and poor cutting tool life. When the enameled copper wire of the compound stator(Series winding + Shunt winding) is in operation. The series + shunt stator has an instant complementary function of high initial torque and constant speed control. Shars power feeds use a compound stator of 0.6mm of 45 turns for Series winding and 0.13mm of 1.800 turns for Shunt winding. Other import brand's power feed use series stator(0.6mm of 150 turns for series winding) to get high starting torque but has no continuous torque. So. The torque and speed will drop rapidly while loading. It is easy to cause vibration and cutter damage APZ150 power feed's rotors use a heat-resistant enameled copper wire with dynamic balancing; special designed cooling fan; aluminum alloy bearing holder. The rotor is durable and not easy to overheat and deform, The main circuit board i
Buy It Now
$10.40 Shipping Condition: New Location: Howell, United States "QUADRALLEL". This device is the result of years of "There has to be a better way" frustration, creative thinking, and the vision of one of the finest ... moreCraftsman / Inventor the industry has ever seen.
Buy It Now
$35.00 Shipping Condition: Seller refurbished Location: Port Washington, United States Vacuum table VT4020 R - refurbished. Clamping Area: 400 x 200 mm. 6 mm surrounding clamping base. Grid: 20 mm. Ready to use. Just mount, connect the vacuum ... moreand you´re ready to go. Vacuum points: 2. 1x vacuum table VT4020R.
Buy It Now
$850.00 Shipping Condition: Used Location: Cumberland, United States t slot table 4’ x 8’ x 6” on stand. Including vise 5 to 6000 lbs
Buy It Now
$13.15 Shipping Condition: New Location: Duncan, United States Model # 3CS6. For Use With 3 Jaw Chucks. Mounts Magnetically on the face of any 3 jaw chuck 5" or larger. Includes 15, 20, 25mm. Allows small and short ... moreparts to project past the chuck jaws, and not fall inside the bore.
Buy It Now
Free Shipping Condition: New Location: Elgin, United States The heavy cast iron base along with the four onboard mounting slots provide stability to the vise during operation. Includes four onboard mounting slots ... moreto securely fasten the vise to a drill press table.
Buy It Now
$436.00 Shipping Condition: Used Location: Mount Sterling, United States The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive. Manufacturer Part ... moreNumber: 2005724. Special Instructions?. What's Next?.
Buy It Now
Free Shipping Condition: New Location: Sheridan, United States Manufactured from quality tool steel- fully hardened and precisely ground taper MT2 shank. The Bore is also internally ground in which the spring loaded ... morepoint is fitted & travel up & down. The shank has a spring loaded center and self adjusted through the spring load while tapping. The overall length of the tool is 145 mm. Shank is MT2 -Teng Style.
Buy It Now
Free Shipping Condition: New Location: Chino, United States OT-WMT-410 Description This three-jaw chuck is widely used in most of the lathes on the market. It has high wear resistance, high quality, fine workmanship, ... moreand a large clamping range. It can be praised as the fine product of lathe accessories. Key Features High Wear Resistance: It uses stainless steel, so it is more durable and wear-resistant than the palstic material. High-quality Material: It uses high-strength steel, clamping with strength and it is not slippery, so it will improve work efficiency. Large Clamping Range: The jaws can be adjusted at will to fit a wide range of blank sizes. Great Accuracy: The workmanship is demanding. We used the latest technology to manufacture this product, so the workmanship is more refined. We will work on every millimeter to ensur.
Buy It Now
$5.00 Shipping Condition: New Location: Chino, United States Wp300 300Mm Shank Chuck Welding Clamping Chuck Welding Positioner Chuck Durable.
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States Model: WP300. 1 X WP300 Welding Table Chuck. Wide Application : The welding turntable chuck has a small design and may be used on a welding positioner. ... moreIt allows for rapid clamping and loosening of workpieces.
|
|
|
|
Milling Machine Table attachment for small Metal Lathe How-To build PLANS
Grandpa's Secrets Discover a Wealth of How-to Projects& Plans from a Bygone Era. Explore our Scientific& Mechanical History in Vintage Hobby. Craft, Technical Magazines. grandpas_secrets Store for lots more great Items. Milling Machine Table attachment for small Metal Lathe How-To build PLANS With this attachment you can turn your lathe into a milling machine. Made from a common angle plate. Handy for the small shop needing a milling machine at times. Mounts on the compound. Replacing the tool post. Made almost entirely on the metal lathe, This is an original 2 page magazine article from 1972. We do not photocopy these. Article Includes Measured Drawings and Diagrams, Instructions, SHIPPING TERMS: Buyer to prepay and add- Multiple Wins may be grouped to save on shipping. $2.00 for USPS first class mail service or, $5.25 for priority ... moremail service. Add $1.75 to total if you would like insurance with delivery confirmation. $8.00 for shipping to Canada. $10.00 other International shipping Payment: by Paypal. Visa and Mastercard accepted thru PayPal. Items shipped upon receipt of Paypal payment. CHECK OUT OUR OTHER AUCTIONS. Listing created with from Black Magik Software.
|
|
|
17” x 7” 2-Axis Linear Workholding Cross Table Fixture Index Milling Drill
This Sale is for a Metalworking 17” x 7” 2-Axis Linear Workholding Cross Table Very nice shape· Metalworking Table Dual-Axis(17” x 7” Work-Holder 2-Track(0.56” Wide) SOLD WITH A 14 DAY RIGHT OF INSPECTION Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" INTERNATIONAL BIDDERS SHIPPING COST NOTICE: Please request a shipping quote directly from us. EBay's shipping calculator may be quoting incorrect rates. Please email us for a discounted shipping quote prior to bidding on an item. Our office hours are 9-5 M-F Eastern Standard Time. U.S. Terms& Conditions Emails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration to all parties. Answering ... moreQuestions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However, USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via Federal Express. We will pass along our substantial Federal Express discount and are happy to quote shipping cost to potential bidders prior to bidding. Please be aware that USPS takes longer than other carriers. We DO NOT ship to Egypt. Libya, Indonesia, Pakistan, Russian Federation, Yemen. Argentina, Brazil, or Venezuela.
|
|
|
PAIR of PARALLELS precision machinist set up tools mill planer shaper table RFC
good used parallels marked RFC approx 13/16" x 1 7/16" x 10" will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e6a3c6879-0x102-
|
|
|
High Performance Air Driven Jumbo Size Stable Table Techincal Manufacturing Corp
High Performance. Air Driven, Jumbo Size, Stable Table Techincal Manufacturing Corp Microsc ope Auto positioning with Objectives Comes with everything in the pictures Subject to prior sale! Photos show everything that is included. For more information. Or to contact us, please feel free to visit our ME page. 14 day Right of Return if not satisfied. Thanks for looking! Please visit our store for more great items! 8259- BLDG 3
|
|
|
XY TABLE FOR DRILL/MILL TABLE SIZE 18.5" X 6" TRAVEL X = 10" Y = 5"
XY TABLE FOR DRILL/MILL TABLE SIZE 18.5" X 6" TRAVEL X = 10" Y = 5" WE WILL SHIP THIS ITEM PLEASE CALL FOR DETAILS. NOTE: WE ALWAYS COMBINED SHIPPING WHEN POSSIBLE! CALL 781-440-0983 FOR MORE INFORMATION
|
|
|
TAILSTOCK FOR ROTARY TABLE DIVIDING HEAD ETC.
TAILSTOCK FOR ROTARY TABLE DIVIDING HEAD ETC. CENTER HEIGHT RANGE 5-1/2-6-1/4"
|
|
|
CNC TABLE XY 14"x 14" TRI SIGMA CORPORATION 21808600 21-8312-06
CNC TABLE XY 14"x 14" TRI SIGMA CORPORATION 21808600 21-8312-06 This came out of an plant closing. This auction is for a CNC TABLE XY 14"x 14" TRI SIGMA CORPORATION 21808600 21-8312-06. This unit was still hooked to the XMR laser we purchased for parts. This table was used to position the laser in the cabinet. It looks to be in great shape. We are including 2 complete controllers as they appear to be the same but we only have 1 table. If you have any questions at all please feel free to ask. 14"x14" XY table with 2 stepper motors and wires. 24"x36" Steel mounting table. EG&G Torque Systems MTE2610-115EF Motion Control Devices M21-DM-1000-5-LD-37A-S. Tri Sigma Corporation 8809005. Copley Controls 303 x 2. Tri Sigma Corporation 8809005. 8809010,21407500. Tri Sigma Corporation Model 8312 21-8312-06. ... moreTri Sigma Corporation Model 8312 21-8312-06. TERMS: Items are sold AS-IS and what you see is what you get Please check the pictures to verify anything stated in the ad. There is a $20 handling charge included with this auction to cover packaging and time. Payment is expected within 48 Hours of sale unless something else is arranged. We ship Fedex USPS or UPS domestically. Bax Global or USPS internationally. Please ask questions before the end of the auction. ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ClicPic
|
|
|
LOT of MISC PARALLELS precision machinist set up tools mill planer shaper table
lot of good used parallels no mfg marked various sizes- some pairs will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
36" Radial Arm Drill Press with tilting table
36" Radial Arm Drill Press with tilting table. This unit is on my floor under power for your inspection. The large table with eye bolt sticking out of corner is not included in the sale. I would possibly consider adding this table in for an additional cost. Otherwise it will be removed from machine prior to sale of this machine. direct any questions to Bill at 717-449-1270
|
|
|
TE-CO 20402PL Machinist Promo Kit, 5/8" Table T-Slot x 1/2-13" Stud-USED-GC
TE-CO 20402PL Machinist Promo Kit. 5/8" Table T-Slot x 1/2-13" Stud-USED-GREAT CONDITION-This item is NOT in its original sealed packaging. This item appears to be in GREAT CONDITION. THIS ITEM SELLS AS IS. THIS ITEM DOES HAVE ALL OF ITS PIECES(WE COUNTED 58 SEPARATE PIECES& IF YOU COMBINE THE CLAMPS. THE PARTS TOTAL IS 52) WE HAVE PROVIDED YOU WITH EXACT PICTURES OF THIS ITEM& YOU ARE ABLE TO SEE& COUNT ALL OF THE PARTS/PIECES. Please Note: THIS ITEM CAME TO US THROUGH LIQUIDATION. IT IS NOT IN ITS ORIGINAL PACKAGING. THERE IS NO PAPERWORK OR WARRANTY WITH THIS ITEM. IT IS PICTURED EXACTLY AS IT IS LISTED FOR SALE. THE PARTS SEEM TO STILL HAVE THEIR ORIGINAL FACTORY GREASE/LUBE. THIS GREASE/LUBE MAY ALSO BE DUE TO THIS ITEM HAVING BEEN USED. THIS ITEM DOES NOT SHOW SIGNS OF EXCESSIVE USE. IT MAY HAVE BEEN A STORE MODEL. ... moreUSED-PURCHASE& RETURN, OR OVERSTOCK. WE HAVE MARKED IT"USED" DUE TO THESE FACTORS& WE DO NOT KNOW ITS HISTORY BEFORE ARRIVAL TO OUR STORE. WE HAVE TRIED TO PROVIDE YOU WITH AS MANY DETAILS AS POSSIBLE& PICTURES. This item came to us through liquidation& the only information we have on this item is exactly what is pictured in this listing. It is up to the buyer to determine if this item meets their specific needs. Pictures show exactly what this item looks like. PLEASE NOTE: YES! We combine shipping! If you are purchasing more than one item from us. PLEASE REQUEST AN INVOICE& we will adjust the shipping cost to reflect the lowest combined shipping cost for you! If you have any questions. Please ask! THANK YOU SO MUCH for looking at our items for sale! If you would like to know more about us. Please check out our BIO& History/Background!
|
|
|
Moore Rotary Table Index Plates & Parts (28139)
Moore Rotary Table Index Plates& Parts(28139) 2) Plates- one has 169 holes One plate has no holes Also included handle and misc. parts for rotary table Loc. Insp. Room(Inv.28139) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money ... moreorder. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Table Elevation Crank Handle Bridgeport / Cincinnati Milwaukee ? Milling Machine
You are looking at a Table Elevation Crank Handle. I am not sure what milling machine it is from. So check the dimensions in the photos. If you have any questions on the dimensions, let me know and I will measure it. It is in good, used condition. No cracks. I made 11 photos(click on the photos to enlarge) Please view the photos below carefully. To see the condition of what is being sold. PLEASE CHECK OUT MY OTHER AUCTIONS. WHERE I AM SELLING OTHER MACHINIST STUFF: My other items Please scroll down to bottom of the listing. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will return the difference to your account. Buyer will pay the reasonable price. Local pick up is also available. Thank you ... morefor looking.
|
|
|
Vacuum hold down table 28 x 32 clamping
Vacuum hold down table 28 x 32 clamping This vacuum hold down table was removed from a very precise custom built machine. It is in good condition. Could also possibly be used as an air bearing table. Overall dims: 33 x 28 x 8 3/4, Table top dims: 32 x 28 x 3/4" thick, Top can be precisely leveled with adjustable standoffs, Surface has slits every 2" which the vacuum is pulled through. Specifications: MFG: Model: Serial: Volts: Amps: Phase: Drive: Controls: Manuals: Air: Weight: 170, Length: 0, Width: 0, Height: 0, Condition: Inventory# 904, For more information call 610-286-1655. Please call or email for shipping rates. When communicating with us please use your own email address or call 610-286-1655. We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system. Send ... moreemails to heritageequipment AT gmail.com The new ebay buyer protection program has inspired us to offer all of our items as-is. This does not mean that you are buying a machine with deficiencies. Known or unknown. What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine. In addition to this written description you will have the opportunity to view high quality photos of the item. With these two sources of information you will have as much information as possible without being physically here to inspect the machine. Feel assured that we will make a diligent effort to give you an accurate description of the equipment. As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine. Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence h
|
|
|
10-1/2" Bridgeport Tailstock with Center for 15" Table
10-1/2" Bridgeport Tailstock with Center for 15" Table Bridgeport Tailstock with Center Ref.107B-396 This tailstock was designed to be used with Bridgeport Rotary Tables to support long work pieces between centers. It can be used for any application where a tailstock with center is needed. Approximate Center Height: 10" to 10-1/2" Overall Dimensions: 6" x 10" x 11" Tall NOTE: The Drive Gear to Raise/Lower the Tailstock is missing. It can still be moved manually. Approximate Shipping Weight: 35 Lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase ... moremultiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
NEWPORT XY TABLE 64MM SQUARE 462 SERIES
NEWPORT XY TABLE 64MM SQUARE 462 SERIES. WE HAV 2 ITEMS S/N 09406 customer satisfaction its our preference, WE DO DIS MENTAL MOST USED MACHINE FOR RESELL, Item will be ship via economy shipping. Delivery take about 7 to 21 working days to most countries or urgent shipment via FEDEX, UPS,OR DHL, +++Please read the Terms& Condition before purchase+++, ACCESSORIES, Any accessories. Manuals, cable and etc that are not in the picture listing or mention, it is NOT INCLUDED. INTERNATIONAL BUYER, Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying, WARRANTY Our warranty is valid for 14 days after initial receipt of item. PAYMENT TERMS, ... morePAYPAL. WIRE TRANSFER TT or Contact Us, RETURN POLICY-For item condition not as described. Defective. Please report to us for replacement or refund within 14 days of receipt. Returns must be in their original condition and include all shipped accessories. Shipping fees will NOT be credited for returns and ALL RETURN SHIPPING COSTS ARE THE RESPONSIBILITY OF BUYER. All items will ship with our warranty label. If any stickers have been removed or tampered. Your refund will be canceled. SHIPPING& HANDLING- Item will be dispatch within 1-2 working days after receipt payment confirmation, To avoid delays in shipment. Please provide a contact number to facilitate shipping,
|
|
|
Linear slide machine table , 10" travel dial indicator siko counter
one) Linear slide table. 7" x 6" x 3/4" aluminum table top, we believe the mechanical counter is siko brand, approx. 10" travel, analog metric indicator 1/100mm division, with(2) 6 1/4" x 2 1/4" adjustable blocks, 2) 40mm x 67" long tubular guide rods. This was a special machine attachment with little use. $65 shipping in the continental U.S. You can send text messages to my cell phone at 9374165497@vtext.com D-10021,22,23,24 If you have any questions. Please email me! Happy bidding! Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $65.00 UPS Ground International Shipping. $700.00 USPS Priority Mail International FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized ... moreimages and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
TILT TABLE ADJUSTABLE ANGLE PLATE T SLOT MACHINIST JIG FIXTURE MILL GRINDER
DESCRIPTION: USED. SMALL TILT TABLE OR ADJUSTABLE ANGLE PLATE. IT MEASURES 7 15/16 X 5 3/4 X 5" HIGH. THE MOUNT SLOTS ARE 6 1/4 APART O.C. APPROX. PICTURE 6 SHOWS A KNOB THAT IS ON THE OTHER SIDE OF THE TIGHTENING NUT. THE KNOB HAS SOME MARKS FROM A WRENCH. IT HAS TO BE HELD WITH A WRENCH OR THE BOLT WILL SPIN INSTEAD OF TIGHTEN THE TABLE. One-Shot Machine Oiler. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ... moreALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shippin
|
|
|
VACUUM TABLE MILLING ENGRAVING HEAVY DUTY
THIS IS A HEAVY DUTY MILLING VACUUM TABLE. MEASURES 16'X8'X2'THICK, IT WEIGHS 54 LBS. IT HAS REMOVEABLE SET SCREWS SO YOU CAN OPEN AND CLOSE HOLES FOR DIFFERENT PIECES OF WORK, SIDE MOUNT VACUUM TUBE NIPPLE, NICE TABLE.417-865-4124.SHIPPING QUOTE IS FOR LOWER 48 ONLY.THANKS
|
|
|
Vestil Manual Turn Table 500 lb. Capacity 12" Diameter 4" Height TT-12-4
This Sale is for a Vestil Manual Turn Table-TT-12-4 Diameter: 12" Load Capacity: 500 lbs. Height: 4" This is only slightly used as shown in photo's. BUY HERE AND SAVE $$$ CHECK MY FEEDBACK AND BUY WITH CONFIDENCE! ALASKA. HAWAII, AND PUERTO RICO, FREE SHIPPING DOES NOT APPLY. DO NOT PAY OFF OF 1ST EMAIL SENT TO YOU. THE SHIPPING WILL NOT BE CORRECT AND YOUR ITEM WILL NOT SHIP. CONTACT US BEFORE PAYMENT FOR SHIPPING QUOTE. Customer Satisfaction Policy" All Items are inspected& tested when possible before listing on eBay. All Items are described to the best of our Ability* If you find items not as described* contact us immediately* We will Make Good* SORRY NO INTERNATIONAL SALES*THIS INCLUDES CANADA*
|
|
|
TABLE SAW PLATFORM/ METAL/ USED
This is a table saw platform that had a"SEARS' table saw on it. This will accept any type table saw or othe type saw the needs a platform. This is 16" x 18 1/2" x 24" high. This is used. But still in good condition. This is a pick up only item. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ROTARY TABLE ACCESSORY for HARDINGE DIVIDING HEAD - Perfect Cond!
ROTARY TABLE ACCESSORY for HARDINGE DIVIDING HEAD Like New. Beautiful Condition! Buy It Now or Best Offer
|
|
|
LATHE LINEAR XY TABLE, 11" X 13"-TRAVEL LENGTH
Inventory Number: 09130830252 Manufacturer: Description: LATHE LINEAR XY TABLE. 11" X 13"TRAVEL LENGTH Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, TABLETOP DIMENSIONS: 8-5/8" X 13" BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on ... moreauction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refun
|
|
|
MFC 8" DIAMETER DRILL PRESS FIXTURE TABLE 1-3/8" THICK (E,30-00)
MFC 8" DIAMETER DRILL PRESS FIXTURE TABLE 1-3/8" THICK Click Images to Enlarge 8" DIAMETER DRILL PRESS FIXTURE TABLE 1-3/8" THICK COMES AS SHOWN IN PHOTOS MOUNT: 1.5" APPROXIMATE(THREADED) WEIGHT: 8 LBS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 10 lbs. Shipping and Handling: ... moreCustomer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as labor
|
|
|
Palmgren 36103 Cross Slide Table 6.0 Inch x 10.0 Inch Top
Palmgren Cross Slide Table 36103 is a dual axis table with a 6" x 10" top. Top is precision ground to 0.001" total indicated reading. Dials are graduated in 0.001" increments. Counter-balanced solid steel ball crank handles enable smooth movement. To eliminate interference with the machine table. The handles do not extend below the base. This model has a single longitudinal T-slot with three transverse 3/8" T-slots. For Use with Drill Presses, Milling Machines, Grinders, CNC Machines, for accurate set-up in boring, drilling, reaming, tapping, and milling operations as well as for positioning, moving, and layout work. Table travel is 6.0" x 4-1/2" One longitudinal T-slot with three transverse 3/8 inch T-slots•Base size 6-3/8 inch x 7-5/8 inch•Height 4-3/8 inch•Four 5/8 inch slots for mount to work surface. ... morePlease email with any questions.
|
|
|
Indexing Table Type Only Smaller Size W/ Fishing Reel Handles 1:50 Shop Made
Vintage used and looks shop/home made casting is aluminum and the ratio is 50:1 fifty full revolutions to turn complete 360 degrees-this is a smaller size indexing type table/item.Found at estate,sold in good working cond-i placed a red dot to show the distance it turn on one ful rev/ of the handle-The Pictures are part of the Description,Please Review,Also when you receive your Item If you not happy with it-Please contact me and we will make it right. Please Remember to place the Best Feedback Ratings as possible,I stride to do my best and provide the best services I can.I sell many unusual items and I Always Provide a number of pictures to shows-sometimes what words did not. Please Note; I do Ship International-If you are out of the USA and win I will pack your Item after the auction- Then send the Ebay-Invoice* all my auctions end within ... moreSeconds and Minutes of each other since I use Turbo Lister,I do Give Shipping Discounts On Combined Purchases Items/Shipping-No-Packing or Handling Charges Here!NO RESERVES! Thanks in advance. Please take a moment to read my terms: I ship international-If your out of the USA I will pack and get a shipping price to the high bidders After The Auction-I DONOT QUOTE SHIPPING PRICES OUT OF THE USA ONLY AFTER THE AUCTION HAS ENDED Thank You! WE SHIP INTERNATIONAL! PAYPAL ONLY ACCEPTED PAYMENT OUT OF THE USA ONLY-If your out of the USA I will pack your item and get a shipping price to the high bidders After The Auction-PLEASE NOTE: I DO NOT QUOTE SHIPPING PRICES OUT OF THE USA ONLY AFTER THE AUCTION ENDS*
|
|
|
28" T-Slotted Swiveling Universal Box Table
Order No 28BT158, Type Universal, Size 28 in. X 28 in. X 29 in. Top; 28 in. X 14 in. Side, Details With(6) T-slots(four on top; two on side) With miscellaneous holes; With swivel base; 90° Tilt; With graduations and indicator. Condition Used, Price $1.200.00, If you have any questions regarding this box table. Please don't hesitate to email us with questions. Most emails will be responded to within 24 business hours. Include the Stock number with your email. Here at Small Tools Inc. Our highly skilled staff fully runs and tests the machines for sale to ensure you get a quality product. If you are able to. Stop in to our warehouse. We can put you in the driver's seat and have you operate all of the machine's features before you buy. We pride ourselves on being an honest American-owned company. Shipping is of the responsibility ... moreof the buyer. But a free quote can be given. Contact us for more information on shipping or arrangements. Please let us know if you are shipping to a business or residential address. This box table is subject to prior sale in our brick-and-mortar building unless otherwise noted. Thank you for looking! Very Truly Yours, Small Tools Inc. 1(800) 821-2674
|
|
|
sherline 5400 mill X axis table used 5000
used sherline manual 5400 x axis table. Note damage on top next to t slot from mill bit and nick on bottom dove tail will have to be filled smooth. table only inch size changed to a long table don't need this one any more.
|
|
|
Excell 12" rotary table made in England
Walter 12" rotary table with dividing head made in Germany This table rotates fine It could use some scrubbing to clean up and some grease You can return this if you don't like it but you cannot return it as"item not as described" It is described as well as we know how to make it. Buyer pays for return shipping. No exceptions. Lists new for $5800 We accept all major credit cards and PayPal. You do not have to have a PayPal account to use their credit card portal. Just use your Visa or MC as normal at their site. Payment is required within 12 hours or the sale could be canceled and the item re-listed We ship very fast and usually free. Almost all items go out the same day with a USPS tracking number which will be posted in your"Items Purchased" page. Expected delivery is two or three business days but most often ... moresooner. Larger items are shipped UPS ground with two to five business days delivery and the buyer pays for that shipping International buyers are responsible for all duties. Tariffs, or other surcharges invoked by their government or their delivery company UPS international buyers must have a telephone number listed on the freight bill Our policies are aligned with Ebay best practices. Returns are accepted within 14 days if not as described or DOA. Please look carefully at our exceptional imaging(beware of sellers who show just a few dark out of focus images) Ask us questions Some items cannot be returned unless returned in exactly the same packaging as sent. This will be noted in their description.
|
|
|
Yuasa #550-210 high precision 10" rotary table tilt-able made in Japan
Yuasa#550-210 high precision 10" rotary table tilt-able made in Japan This table rotates fine It is unclear how the tilt works so we cannot check it. It could use some scrubbing to clean up and there is a ding or two on the table. look close at the photograph. You can return this if you don't like it but you cannot return it as"item not as described" It is described as well as we know how to make it. Buyer pays for return shipping. No exceptions. Lists new for $7280 We accept all major credit cards and PayPal. You do not have to have a PayPal account to use their credit card portal. Just use your Visa or MC as normal at their site. Payment is required within 12 hours or the sale could be canceled and the item re-listed We ship very fast and usually free. Almost all items go out the same day with a USPS tracking number which ... morewill be posted in your"Items Purchased" page. Expected delivery is two or three business days but most often sooner. Larger items are shipped UPS ground with two to five business days delivery and the buyer pays for that shipping International buyers are responsible for all duties. Tariffs, or other surcharges invoked by their government or their delivery company UPS international buyers must have a telephone number listed on the freight bill Our policies are aligned with Ebay best practices. Returns are accepted within 14 days if not as described or DOA. Please look carefully at our exceptional imaging(beware of sellers who show just a few dark out of focus images) Ask us questions Some items cannot be returned unless returned in exactly the same packaging as sent. This will be noted in their description.
|
|
|
Scherr Tumico Inc rotary X Y table with 2 minute vernier -- used
Scherr Tumico precision rotary X Y table with 2 minute vernier 1"x 1" used. 60 day warranty from date shipped. International buyers please note: Unless arrangements are made with the seller prior to purchase the buyer is responsible for any and all customs and brokerage fees. Please be aware that delays due to customs inspections do and can occur and that it is beyond our control if your shipment is held up or delayed due to customs inspections these items new or used are surplus items that have been since they were first manufactured handled. Stored possibly neglected and or altered by others. The purchaser/ installer are responsible to confirm the true condition as well as proper installation and use per applicable codes. in addition there is always the possibility we may have made an error in the listing. dale
|
|
|
WELDING-ASSEMBLY 24" x 30" POSITIONING HYDRAULIC LIFT TABLE with 360° SWIVEL
WELDING POSITIONING-HYDRAULIC LIFT TABLE- WELDING POSITIONING-HYDRAULIC LIFT TABLE INVENTORY# 4379 DESCRIPTION USE AS A WELDING POSITIONING TABLE. AN ASSEMBLY TABLE, A POSITIONING TABLE AND MORE FABCO AIR-OVER-HYDRAULIC SYSTEM SPECIFICATIONS ALUMINUM TABLE: TABLE TOP SIZE: 24 x 30 x ¾ SOLID TOP TABLE SWIVELS 360° TABLE HEIGHT: MINIMUM) 36" HEAVY STEEL CONSTRUCTION BASE: 25 x 29 x 1 THICK SOLID STEEL WITH(2) 4 TUBING FOR FORK LIFT ACCESS COLUMN: 4 STEEL TUBING FOOT PEDAL OPERATION GOOD CONDITION FOB Our Floor CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman ... moreMachine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RETURNS Returns will not be accepted without prior approval. If you need to make a return. Please contact us before you ship the merchandise back so we can issue you a Return Merchandise Authorization(RMA) number. All items are sold with the best intentions and most complete description available. PLEASE ASK QUESTIONS BEFORE BIDDING! Buyer must pay for return shipping. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. All
|
|
|
8" Rotary Table - High quality made in Japan.
This high quality 8" rotary table was made in Japan. Used but works very well and not beat up. Buyer pays actual shipping cost for a package approximately 7" x 15" x 18" and 40 lbs. No additional packing or handling charges.
|
|
|
CAST IRON 17 1/2" x 9" TABLE EXTENSION
CAST IRON 17 1/2" x 9" TABLE EXTENSION- CAST IRON 17 1/2" x 9" TABLE EXTENSION INVENTORY# 4536 MODEL: 48-68 FEATURES ALL MACHINED SURFACES HEAVY-DUTY CAST IRON SPECIFICATIONS: DIMENSIONS(APPROXIMATE) WORK AREA: 15 1/2" LONG x 8 1/4" WIDE SIDE: 9 WIDE x 1/2 HIGH TABLE FRONT: 14 1/2 LONG x 1" HIGH(4) HOLE MOUNT: CENTER-TO-CENTER: 9 1/4" L CENTER-TO-CENTER: 5 1/2" W(1) CENTER MOUNT VERY GOOD CONDITION FOB OUR FLOOR CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. ... moreManufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be made. The information on the web site should not be used for formal quotation. Price and information presented in the writ
|
|
|
CAST IRON 5” x 7 ½” EXTENSION TABLE
CAST IRON 5 x 7 ½ EXTENSION TABLE- USED CAST IRON EXTENSION TABLE INVENTORY# 4461 MADE OF CAST IRON SPECIFICATIONS: SIZE: 5 x 7 ½ FLANGE ON REAR: 1 ½ WITH 3/16 SLOT 2 ¼ FROM END FLANGE ON RIGHT SIDE: 1 ½. WITH V WEIGHT: 3 LBS. 5 OZ GOOD CONDITION FOB Our Floor CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, ... moredifferent models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be made. The information on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Please contact one of our sales representatives if you require more information or a current f
|
|
|
Warner & Swasey Co. 15in Rotary Table Spacer 1677
Warner& Swasey Co. 15in Rotary Table Spacer 1677- The pictures tell it all#2286(JK)11/02/2010 Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does ... morenot provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restrictions vary. We will ship your item to the most cost efficient way we can provide. We do allow local pickup at our facility in Fort Worth. You are welcome to arrange your own shipping. On Jan-19-11 at 08:41:4
|
|
|
Vertical Turret Lathe BERTHIEZ TMM 315 table 6300mm / 248" price $649,000.00
Description Specification: price is $649K. I cannot make price higher than $499.000.00. Vertical Turret Lathe BERTHIEZ TMM 315 6300mm/ 248" table. Vertical Turret Lathe- Single Column BERTHIEZ Type TMM 315 Year of construction 1976 Location: POLAND Control NC Specifications and Equipment Table Diameter: 6300mm/ 248" Swing Diameter: 8000mm Turning Height: 4000mm Table Turning Speed: 0.5- 53 RPM Table 2 motor power: 140 kW. Max. Work piece Weigh:160000 kg/ 350000 Lbs weight of the machine: 220 t Vertical saddle: ram dimension: 280x280. Ram travel: 2000 mm horizontal travel: 4200 mm turning angle of saddle: 5-45 Side saddle: Ram dimension: 360x360. Ram travel: 1600 mm. Vertical travel: 2800 mm Turning angle of saddle: 5-45 Technical description of milling saddle: Vertical spindle taper ISO 50speeds 15-1500 rpm Side spindle taper ISO. ... more60speeds 10-1000 rpm. This machine is for sale and it is located in Poland. The price include disassembly and loading to the closest port in Poland. The buyer will pay the shipping from Poland to the destination. We can help assembly for additional price. The machine can be seen by appointment only in Poland. This is only one machine of this size for sale. Don't miss the biggest job you can handle with this monster. I'm the only person In United Sates who will advertise for this price. Please call Damian 586-215-6171. Also this machine can be retrofitted to CNC machine for customer needs. Of course for additional price. We can get quotes for Fanuc. Siemens or any other controller customer would like to have. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-145e2ff0001-0x10c-
|
|
|
Lathe Machinist Metalworking Rotary Indexer Table Tool
Paypal. Visa, Mastercard, American Express. In order to promote a great transaction please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. Standard shipping or local pickup is available. Please use the freight shipping calculator to the right to calculate freight shipping which only has the freight carrier's standard insurance. If you require your item to be fully insured for ... morethe freight shipment please email us indicating that so we can total your invoice with shipping and the additional insurance. PA State sales tax applies to all local pickups unless you have a tax exemption form with you at the time of pickup. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Lathe Machinist Metalworking Rotary Indexer Table Tool DESCRIPTION: ~ Up for bid is a good working machinist tool. gsrx_vers_566(GS 6.7.1(566)
|
|
|
18" T-Slotted Plain Box Table
Order No 18BT161, Type Plain, Size 18 in. X 24 in. X 18 in. Top; 15 in. X 24 in. Side, Details With(5) T-slots(3 on top; 2 on side)Mounting Slots on base; Good condition. Condition Used, Price $700.00, If you have any questions regarding this box table. Please don't hesitate to email us with questions. Most emails will be responded to within 24 business hours. Include the Stock number with your email. Here at Small Tools Inc. Our highly skilled staff fully runs and tests the machines for sale to ensure you get a quality product. If you are able to. Stop in to our warehouse. We can put you in the driver's seat and have you operate all of the machine's features before you buy. We pride ourselves on being an honest American-owned company. Shipping is of the responsibility of the buyer. But a free quote can be given. Contact us for ... moremore information on shipping or arrangements. Please let us know if you are shipping to a business or residential address. This box table is subject to prior sale in our brick-and-mortar building unless otherwise noted. Thank you for looking! Very Truly Yours, Small Tools Inc. 1(800) 821-2674
|
|
|
20" T-Slotted Plain Box Table
Order No 20BT160, Type Plain, Size 20 in. X 26 in. X 20 in. Top; 17 in. X 26 in. Side, Details Top: 3) T-slots; Side: 3) T-slots; With mounting slots on base; Good condition. Condition Used, Price $850.00, If you have any questions regarding this box table. Please don't hesitate to email us with questions. Most emails will be responded to within 24 business hours. Include the Stock number with your email. Here at Small Tools Inc. Our highly skilled staff fully runs and tests the machines for sale to ensure you get a quality product. If you are able to. Stop in to our warehouse. We can put you in the driver's seat and have you operate all of the machine's features before you buy. We pride ourselves on being an honest American-owned company. Shipping is of the responsibility of the buyer. But a free quote can be given. Contact us ... morefor more information on shipping or arrangements. Please let us know if you are shipping to a business or residential address. This box table is subject to prior sale in our brick-and-mortar building unless otherwise noted. Thank you for looking! Very Truly Yours, Small Tools Inc. 1(800) 821-2674
|
|
|
Leitz Wetzlar 16" Diameter Motorized Trunnion Rotary Table 220V
FOR SALE Used Leitz Wetzlar Motorized Trunnion Table Part# 692128 16" Table Diameter In working condition 220V See pictures for more details. Weight: 750 lbs.
|
|
|
Sherline P/N 3750 Tilting Angle Table - For Sherline Milling Machines
Sherline P/N 3750 Tilting Angle Table Mounts to the mill table and allows parts to be machined at variable angles. The threaded lathe chuck mou nt is included- parts from the lathe can be transferred directly to the mill. Thi s was n e ver actuall y u sed on th e mill. But it was unpac ked so I'm selling it as used. It does show a few minor scratche s here and there from the toolbox. But overall it is in excellent condition. Please be sure to examine the ph otographs(zoom) for details on the condition. Instructions and further information can be found at Please Note: U.S. Buyers Only/ No International Sales/ No International Shipments
|
|
|
Slotted table expanding hold downs 12 pcs
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for sale are these Slotted table expanding hold downs 12 pcs
|
|
|
5 inch rotary table tail stock with lathe center
5 inch rotary table tail stock with lathe center
|
|
|
6" Air Bearing Rotary Table
6" diameter Air Bearing Rotary Table. Good working condition.
|
|
|
Bridgeport 15" rotary table made in USA
Bridgeport 15" rotary table made in USA We are not equipped to take this apart and clean it up. The handle turns freely but the table will not turn when worm is engaged. It may move with more effort but not going to try it and break something. My opinion is that it is old and has sat for decades and glued itself together. So you will be taking on a project. Shipping will be by freight. If you go to any of the dozens of freight forwarders online you can get an estimate. From zip:84741 To zip: size 24 x 24 x 12 wooden crate weight 200 lbs Add a crating fee of $50 We accept all major credit cards and PayPal. You do not have to have a PayPal account to use their credit card portal. Just use your Visa or MC as normal at their site. Payment is required within 12 hours or the sale could be canceled and the item re-listed We ship very fast and ... moreusually free. Almost all items go out the same day with a USPS tracking number which will be posted in your"Items Purchased" page. Expected delivery is two or three business days but most often sooner. Larger items are shipped UPS ground with two to five business days delivery and the buyer pays for that shipping International buyers are responsible for all duties. Tariffs, or other surcharges invoked by their government or their delivery company UPS international buyers must have a telephone number listed on the freight bill Our policies are aligned with Ebay best practices. Returns are accepted within 14 days if not as described or DOA. Please look carefully at our exceptional imaging(beware of sellers who show just a few dark out of focus images) Ask us questions Some items cannot be returned unless returned in exactly the same packaging as sent. This will be noted in their description.
|
|
|
Tsudakoma 9" rotary table indexer with Fanuc Dc motor A06B-0642-B011
You are looking used Tsudakoma 9" rotary table indexer with Fanuc Dc motor A06B-0642-B011. We cannot test it at this point. Please scroll down to view more pictures. Question please E-mail damian@ljmachinery.com or call 586-215-6171. We can overnight. With 30day exchange warranty. Please view the pictures closely. We will not charge any handling fees. Shipping is available worldwide. Any questions please forward to THANK YOU FOR LOOKING AT OUR LISTING DO NOT HESITATE TO MAKE AN OFFER. Terms& conditions(please read them before biding) You are supplied with 30 day exchange warranty on specific items or we guaranty them against DOA. We make the right to charge a restocking fee. The items must be received unused and in the same condition as shipped. Shipping: All items will be shipped upon receiving founds for this transaction. Pick ... moreup is available for all items. All items are sealed. Buyer protection programs are available, shipping insurance is required. We will not charge any handling fees for regular 1 business day handling, shipping is available worldwide and some extra charges may apply. Payment: All payments are expected in 5 business days after receiving invoice from LJ MACHINERY. We accept credit card payments online or by phone via our merchant(Visa. Master card, Discovery) We will accept PayPal for this transaction. We will accept wire transfer. Check, cash. Liability: Seller makes no claims as to the equipments compliance to LJ MACHINERY. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the use of this equipment. It is the buyer’s responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer’s responsibility as to the safe handling and operation of this equipment. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Tsudakoma 12.6" rotary table indexer RNCM-300R SN: 404071 FOR OKUMA SANYO DENKI
You are looking used Tsudakoma 12.6" rotary table indexer RNCM-300R SN: 404071 FOR OKUMA SANYO DENKI MOTOR. This unit in good working order. We cannot test it at this point. Please scroll down to view more pictures. Question please E-mail damian@ljmachinery.com or call 586-215-6171. We can overnight. With 30day exchange warranty. Please view the pictures closely. We will not charge any handling fees. Shipping is available worldwide. Any questions please forward to THANK YOU FOR LOOKING AT OUR LISTING DO NOT HESITATE TO MAKE AN OFFER. Terms& conditions(please read them before biding) You are supplied with 30 day exchange warranty on specific items or we guaranty them against DOA. We make the right to charge a restocking fee. The items must be received unused and in the same condition as shipped. Shipping: All items will be shipped ... moreupon receiving founds for this transaction. Pick up is available for all items. All items are sealed. Buyer protection programs are available, shipping insurance is required. We will not charge any handling fees for regular 1 business day handling, shipping is available worldwide and some extra charges may apply. Payment: All payments are expected in 5 business days after receiving invoice from LJ MACHINERY. We accept credit card payments online or by phone via our merchant(Visa. Master card, Discovery) We will accept PayPal for this transaction. We will accept wire transfer. Check, cash. Liability: Seller makes no claims as to the equipments compliance to LJ MACHINERY. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the use of this equipment. It is the buyer’s responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer’s responsibility as to the safe handling and operation of this equipment. Powered by The free listing tool. List your items fast and easy and manage your act
|
|
|
2 axis X Y Table 5x8 travel 12.25 x 5.60 table size
2 axis X Y Table 5x8 travel 12.25 x 5.60 table size
|
|
|
LARGE LOT of CAP HEAD SCREWS machinist milling table clamps hardware *H
See photos for detail on condition. See the last three photos for sizes. This week I am selling a HUGH assortment of clamps. T-slot nuts& bolts, step blocks, serrated end clamps by Armstrong, Vulcan, Northwestern, Eron and Te-Co. Mix and match to get exactly what you need. I will combine items to save you money on shipping and CAP shipping at $20.00. So even if you purchase a 100 pounds of clamping hardware you will not pay any more than $20. This offer is for USA buyers only. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign ... morebuyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
SMW Hydraulic Rotary Indexer Table, # RT315HY, Maier 12" Chuck, Used, WARRANTY
Title: SMW Hydraulic Indexer Description: Our Internal Stock# 4-C7-1(11/6/14 dan) 11-6-14 kara) You are about to purchase the following item: Model# RT315HY Hydraulic Indexer Maier 12" 3-Jaw Chuck Weight- 640 lbs This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) we can get you a great shipping rate via UPS LTL Freight to your Business location with a Lift Truck/ Loading dock. If you would like to get the exact cost to your destination feel free to contact us at any time. Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU ... morePURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and payed for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us wi
|
|
|
DELTA ROCKWELL SANDER SAW TABLE PROTRACTOR
YOU ARE BIDDING ON A DELTA ROCKWELL SAW OR BELT SANDER TABLE PROTRACTOR GUIDE. ASK QUESTIONS
|
|
|
Ammco / Delta Metal Shaper Box Form Shaper Table
Ammco/ Delta Metal Shaper table see pictures for description and condition. The feed screw picture is not included and will be offered in another listing. shipping to lower 48- buyer agrees to pay all actual shipping cost.
|
|
|
TABLE DRILL PRESS ADJUSTABLE JAWS
Drill adjustable table jaws. Comes as shown on pixs Please check all pixs for more details. Check out my!
|
|
|
NICE DELTA 4" BELT/ 6" DISC SANDER DIE CAST ALUMINUM, ADJUSTING TABLE
Table for a Delta 4" Belt/ 6" Disc Sander with assembly shaft. Table adjust from 0 to 45 degree's Table surface is 9" wide and 6" deep. You are purchasing the actual item in the photo's.
|
|
|
SHARS XY TABLE - 12" X 5 1/2" TOP
SHARS XY TABLE- 12" X 5 1/2" TOP Description: Thank you for your interest! We are auctioning off this SHARS XY TABLE- 12" X 5 1/2" TOP Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. Comes as shown! SOME Cosmetic wear. USA CUSTOMERS- NO MEANS TO TEST. However will offer a 14 day guarantee to try it out fully with right of return. Simply contact us direct and we will give you instructions to return it. Please dont use the item not as described function since that now goes into our ratings for top seller starting in fall of 2014. INTERNATIONAL CUSTOMERS- NO MEANS TO TEST. And due to the cost to ship internationally and the distance items have to travel, ALL items shipped ... moreoutside of the USA are SOLD AS IS WITH NO GUARANTEES. We love our international customers and would love to have your business but due to the nature of the used equipment, and that all items are untested and used, all sales are final. No refunds or returns, please bid accordingly! 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's responsibility to understand that the
|
|
|
14"x18.375"x.5" Steel Work Holding Workholding Layout Table Plate 3/8"-16
14" X 18.375" X 0.5" Steel Work Holding Workholding Plate w/ 38"16 Threads THIS UNIT IS USED. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: SHIPPING WEIGHT: 40 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ... moreATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS. COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEED
|
|
|
21-5/8" x 48-3/4" T Slot Steel Cast Iron Table, Off of Mazak VQC-20/40, Used
Title: 21-5/8" x 48-3/4" T Slot Steel Cast Iron Table. Off of Mazak VQC-20/40, Used Description: Our Internal Stock# 5-B4-1(2-18-15 dale) You are about to purchase the following item: 1- 21-5/8" x 48-3/4" T Slot Steel Cast Iron Table. Off of Mazak VQC-20/40, Used 21-5/8" x 48-3/4" T Slot Steel Cast Iron Table Table has Ball Screw Nut Mount on underside. Part of the Casting. Taken off of Mazak VQC-20/40 Vertical Machining Center. Appears to be in pretty nice shape(see pics) Made in Japan Weight- 820 Lbs. w/ Skid 850 Lbs. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you ... morewill be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for
|
|
 |