|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: United States 【Flexible Rotatable Joint】3 rotatable joints can be adjusted to any directions and positions, and 2 adjustable knobs are also available to tighten the ... moredial indicator better. Size Magnetic Base. We're happy to help.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States The kit includes a massive selection of shapes for all types of cuts. 10pcs Cutting burr bits in plastic box. The speed of the electric or pneumatic tools ... moreusually is 6000-50000 revolutions per minute.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States These wheels are virtually chemical resistant and not affected by water, oils, or acids. In addition, they possess a low impact resistance and high wear ... morerate. High Performance, High Strength & High Precision Grinding.
Buy It Now
Free Shipping Condition: New Location: United States 【How to Use】: First install the independent shaft on the machine, then install the sandpaper roll on the shaft body, it will automatically lock when rotating, ... moreit is more convenient and fast when you need to change.
Buy It Now
$4.00 Shipping Condition: New – Open box Location: Macks Creek, United States
Buy It Now
Free Shipping Condition: New Location: Joliet, United States Mitchell Abrasives is the manufacturer of round and flat abrasive cords. They are used to sand, clean, debur, or polish hard-to-reach areas. Aluminum ... moreOxide-tough, long life abrasive, ideal on ferrous containing, high tensile material.
Buy It Now
$4.00 Shipping Condition: Seller refurbished Location: Macks Creek, United States
Buy It Now
Free Shipping Condition: New Location: Miami, United States Ewelry making, cylinder head porting and sculpting. 【DOUBLE-CUT】Double-cut style has rows of cutting teeth cut in two intersecting directions for fast ... morematerial removal and a rougher finish.Most popular choice for rapid stpck removal on Carbon and Stainless Steel.
Buy It Now
$4.00 Shipping Condition: New – Open box Location: Macks Creek, United States
Buy It Now
$4.00 Shipping Condition: Seller refurbished Location: Macks Creek, United States
Buy It Now
Free Shipping Condition: New Location: Destin, United States High Performance, High Strength & High Precision Grinding These wheels are virtually chemical resistant and not affected by water, oils, or acids. In ... moreaddition, they possess a low impact resistance and high wear rate.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Leonard Bendmaster Model 74 Hydraulic Operations Maintenance and Parts Breakdown Manual Year (1966). Hydraulic Cylinder Breakdown. Parts Breakdown. It ... moremay not have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
Buy It Now
Free Shipping Condition: New Location: United States 2: This set includes 10pcs a massive selection of shapes for all types of cuts.
Buy It Now
Free Shipping Condition: New Location: Joliet, United States In theindustries. Always ensure your burr shank is well inserted into your collet and clamped down tightly. --- If the item cannot use or you received ... moreyour item not as expected. Protective: Shapes included SA, SC, SD, SF, SL.
Buy It Now
Free Shipping Condition: New Location: Denver, United States The Forney 31610 6010 mild steel Flexiweld is an all purpose electrode used in all positions. 6010 is for use with a DC welder and runs on DCEP (reverse ... morepolarity). We're committed to your success regardless of location size or needs.
Buy It Now
$1.68 Shipping Condition: New Location: 金东区, China
Buy It Now
Free Shipping Condition: New Location: Joliet, United States 2: This set includes 10pcs a massive selection of shapes for all types of cuts. The kit includes a massive selection of shapes for all types of cuts. ... moreGreat Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States I have Thousands of Manuals for Metal Working. Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It ... morewould be a pleasure to get your Machine Up and Running Again through this Invaluable Information. This item will be sent to you refurbished like new. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve collected Vintage Manuals for a few years. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Use the information in these manuals for Operations. Operate, Program, Maintenance, Parts Lists, Examinary Training, Motion Picture for Vintage Images, Instructions, Schematics, Wiring Diagrams, Assemblies, Methods and Ideas of Machining. Please View the Following information. Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. I will allow you to return any information that is of No use to you. Machine Obsolescence! SIP 620 720. Hauser, Tooling and Equipment, Tooling Systems Manual Year(1982) This Manual Covers Models: 620 720 MP 42DR MP-43 MP-52DR– MP-53 MP-3KV MP-3KV A MXH-700 This Manual Includes: Recommended Sets for: Coordinate Boring and milling machines SIP620 and 720 Recommended Sets for: Jig Boring Machines SIP Hauser MP-42DR– M)43 SIP Houser MP-52DR– MP-53 Jig Boring Machine MP-3KV/MP-3KV”A” Data Sheets“CO” and“SIP” Assembly Charts Tool Pre-setter MXH-700 This Manual Has 240 Printed Pages. Year 1982 Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE All Manuals come Spiral Bound. Transparent Plastic Front and Back Cover. Most Products are Shipped the next day. After Much Consideration. ALL INTERNATIONAL SALES Will Be a Computer Generated.pdf E-Mail. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14bc7ec82b5-0x100-
Buy It Now
Free Shipping Condition: New Location: United States WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects or ... moresanding and finishing contoured wood surfaces. COMMON SHANK SIZE: The 1/8 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders.
Buy It Now
Condition: Used Location: Los Angeles, United States , Equipped For Power - Take - Off, #5353. We also carry a wide variety of tooling at competitive prices. Table Size24". A: With nearly 60 years of experience ... moreand industry know how, we can find the machine you need.
1d 2h 48m 17s 0 bids
$30.99 Now
$4.00 Shipping Condition: Seller refurbished Location: Macks Creek, United States
Buy It Now
Free Shipping Condition: Seller refurbished Location: Menifee, United States Duro Tools W3080, W3081 Series 15’ 1 ½” Standard Model Drill Presses, Assembling Operations and Maintenance Manual. Multiple Spindle Presses parts List. ... morePictures of the Machine Says A Thousand Words.
Buy It Now
$4.00 Shipping Condition: New – Open box Location: Macks Creek, United States
Buy It Now
$4.00 Shipping Condition: New – Open box Location: Macks Creek, United States
Buy It Now
$4.00 Shipping Condition: Seller refurbished Location: Macks Creek, United States
Buy It Now
Condition: Used Location: Los Angeles, United States Our vast warehouses contains over 1,500 pieces of New and Used machines available for inspection in person, or live via internet webcam fed directly to ... moreyour computer's browser. LOCAL PICKUP IS FREE, LOADING ONTO A FLATBED OPEN TRUCK OR BOX VAN.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve read Parts of these Programming and Operations Manuals. ... moreThere are So Many Possibilities. 400 Series. After Much Consideration, ALL INTERNATIONAL SALES Will Be a Computer Generated.
Buy It Now
$4.00 Shipping Condition: Seller refurbished Location: Macks Creek, United States
Buy It Now
Free Shipping Condition: New Location: Seattle, United States These wheels are virtually chemical resistant and not affected by water, oils, or acids. In addition, they possess a low impact resistance and high wear ... morerate. High Performance, High Strength & High Precision Grinding.
Buy It Now
Free Shipping Condition: New Location: United States Suppliers of Digital Readouts for machine tools. With 2 Years Warranty! Glass scales linear encoders. Also stockists of wide range of standard and special ... morepurpose measurement tools, including digital calipers, height gauges, depth gauges& angle protractors. WR365 Angle Gauge With Level& Dual Line Display- Has a wide range of applications for measuring and setting angles. Dual readout displays both relative& true level angles. True Level Display- Calibratable true level display with bubble level indicator and 0.1° resolution numeric read out. Please see video demo below. To see angle gauge in use, Relative Angle Measurement- Gauge can be zeroed to a non level reference surface and angles measured relative to that surface. 0.1° resolution numeric read out and tilt direction indicator from relative surface display. 5 Point Flip Up Display- For flexible visibility and positioning when setting and measuring. Display Hold Function- will hold the current reading on the display. Battery Powered- uses two AAA batteries(not included) Applications Include- Mitre saws. Table saws, Planner fence, Band saw fence, Tilting angle plates, Angle table, Sine table, Swivel/ tilt vice, ect. Range- +/ 180 Degrees. Resolution- 0.1 Degrees. Repeatability- 0.1 Degrees. Size- 2.2 x 2.3 x 1.3 Inch/ 56 x 58.5 x 33 mm. Power- 2 x AAA batteries(not included) SEE OUR CUSTOMERS' FAVORITES: SOLDERING STATIONS SMD REWORK STATIONS ULTRASONIC CLEANERS SOLDER WIRE SOLDER PASTE POWER SUPPLIES BRAZING ELECTRONIC CHEMICALS JEWELRY MAKING SUPPLIES PCB PROTOTYPING MATERIALS TORCHES TOOLS
Buy It Now
Condition: Seller refurbished Location: Prospect, United States Bridgeport Series I Milling Machine. Servo X-axis power feed. Knee Travel (Z-Axis) 16 in. - (30 min. duty cycle) 3 hp (2.2 kW). Power Quill Feed 0.0015 ... morein. /rev (0.038 mm). Overall Size 42 x 9 in.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. ER40 ULTRAPRECISION 24MM COLLET. Collet Bore : 24MM. ER40 ULTRA PRECISION 24MM COLLET. Collet Range : 0.944-0.905. Cobalt And HSS Drills. ... moreCobalt And HSS Endmills. We do not require a minimum order-we'll get you what you need, when you need it!
Buy It Now
Free Shipping Condition: New Location: Denver, United States Mitchell Abrasives is the manufacturer of round and flat abrasive cords. They are used to sand, clean, debur, or polish hard-to-reach areas. Aluminum ... moreOxide-tough, long life abrasive, ideal on ferrous containing, high tensile material.
Buy It Now
$4.00 Shipping Condition: New – Open box Location: Macks Creek, United States
Buy It Now
$4.00 Shipping Condition: Seller refurbished Location: Macks Creek, United States
Buy It Now
Condition: Used Location: Los Angeles, United States WD-10C, (2) Worklights, Coolant Pump/Tank, Forward/Reverse Push Button, Service Disconnect, Angle Guide, #A4571. We also carry a wide variety of tooling ... moreat competitive prices. Diamond Grinding Wheel Size10".
Buy It Now
$4.00 Shipping Condition: Seller refurbished Location: Macks Creek, United States
1d 2h 48m 17s 0 bids
$30.99 Now
$4.00 Shipping Condition: Seller refurbished Location: Macks Creek, United States
Buy It Now
Free Shipping Condition: New Location: Richmond, United States Made in USA. Model Number N44603. Cut Type Roughing. Finish Type Uncoated (Bright). About Niagara Cutter. Cobalt steel resists abrasion and high cutting ... moretemperatures, and has higher feed rates than high-speed steel.
Buy It Now
$4.00 Shipping Condition: New – Open box Location: Macks Creek, United States
Buy It Now
$4.00 Shipping Condition: Seller refurbished Location: Macks Creek, United States
Buy It Now
Free Shipping Condition: New Location: Winchester, United States The Gold coating reflects 90-percent of radiated heat for cooler operation and less eye fatigue. Were committed to your success regardless of location ... moresize or needs. Provides UV-AB Protection. neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.
Buy It Now
$4.00 Shipping Condition: New – Open box Location: Macks Creek, United States
Buy It Now
$4.00 Shipping Condition: New – Open box Location: Macks Creek, United States
Buy It Now
$4.00 Shipping Condition: New – Open box Location: Macks Creek, United States
Buy It Now
Free Shipping Condition: New Location: Sun Valley, United States REX CUT WHEEL GFX A120 GRIT. Wheels feature bonded laminates multiple layers of cotton fiber that are impregnated with aluminum oxide abrasive grains ... moreand then pressed and bonded together. This is a GFX Wheel 6"x1/4" in a 120 Grit, a Rex-Cut product Made in USA.
Buy It Now
$4.00 Shipping Condition: Seller refurbished Location: Macks Creek, United States
Buy It Now
Condition: Used Location: Los Angeles, United States Maximum Bevel Width0.59". Bevel Angle15° to 50° (Variable). Our vast warehouses contains over 1,500 pieces of New and Used machines available for inspection ... morein person, or live via internet webcam fed directly to your computer's browser.
Buy It Now
$4.00 Shipping Condition: New – Open box Location: Macks Creek, United States
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Periodic Maintenance. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. This Manual Covers Models This Manual ... moreIncludes Set-Up Wheel End. Operation Cup Wheel End.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. ER20 PRECISION 11.0MM COLLET. Collet Bore : 11.0MM. Collet Range : 0.433-0.394. Cobalt And HSS Drills. Cobalt And HSS Endmills. Need a part?. ... moreWe use our buying power to get the best possible cost and we pass the savings on to you!
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. ER32 PRECISION 14MM COLLET. Collet Bore : 14MM. Collet Range : 0.551-0.512. Cobalt And HSS Drills. Cobalt And HSS Endmills. Need a part?. ... moreWe use our buying power to get the best possible cost and we pass the savings on to you!
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. ER16 PRECISION 6.0MM COLLET. Collet Bore : 6.0MM. Collet Range : 0.236-0.216. Cobalt And HSS Drills. Cobalt And HSS Endmills. Need a part?. ... moreWe use our buying power to get the best possible cost and we pass the savings on to you!
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. Collet Range : 0.468-0.429. Cobalt And HSS Drills. Cobalt And HSS Endmills. ER25 PRECISION 15/32 IN. We do not require a minimum order-we'll ... moreget you what you need, when you need it! Need a part?.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. ER40 PRECISION 15MM COLLET. Collet Bore : 15MM. Collet Range : 0.590-0.551. Cobalt And HSS Drills. Cobalt And HSS Endmills. Need a part?. ... moreWe use our buying power to get the best possible cost and we pass the savings on to you!
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. Collet Range : 0.562-0.523. Cobalt And HSS Drills. Cobalt And HSS Endmills. ER40 PRECISION 9/16 IN. Need a part?. We use our buying power ... moreto get the best possible cost and we pass the savings on to you!
Buy It Now
$17.50 Shipping Condition: Used Location: Brattleboro, United States A removable positioning guide at one end allows use without a second person. Manufacturer's markings on this rod are as follows The photos are our file ... morephotos.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. Collet Range : 0.156-0.136. Cobalt And HSS Drills. Cobalt And HSS Endmills. ER11 PRECISION 5/32 IN. Need a part?. We use our buying power ... moreto get the best possible cost and we pass the savings on to you!
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. ER20 ULTRAPRECISION 13.0MM COLLET. Collet Bore : 13.0MM. ER20 ULTRA PRECISION 13.0MM COLLET. Collet Range : 0.511-0.472. Cobalt And HSS Drills. ... moreCobalt And HSS Endmills. We do not require a minimum order-we'll get you what you need, when you need it!
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. ER32 ULTRAPRECISION 4.0MM COLLET. Collet Bore : 4.0MM. ER32 ULTRA PRECISION 4.0MM COLLET. Collet Range : 0.157-0.118. Cobalt And HSS Drills. ... moreCobalt And HSS Endmills. We do not require a minimum order-we'll get you what you need, when you need it!
|
|
|
|
General rachet type tapping handles
Rachel style tapping wrench Great used working condition Model no. 161/162 f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-14050dbe3d1-0x107-
|
|
|
DOOSAN #310 CNC TURNING CENTER - Age: 1998
DOOSAN#310 CNC TURNING CENTER- 1998 EQUIPPED WITH: AGE: 1998- MODEL: DOOTURN 310- FANUC OT- 12.2" MAX TURNING- 17.71" BETWEEN CENTERS- MAUNALS- 4.500 MAX RPM- X=7.8" Z=17.72" 10HP- HYD TAILSTOCK- CHIP CONVEYOR- WGT: 7.000LBS PRICE: FOB BROOK PARK. OH- $ 19,500.00 SUBJECT TO PRIOR SALE VIDEO LINK: BT 8591 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT DE MAXWELL OR JOHN AT: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142 sales@mckeanmachinery.com
|
|
|
AM SWISS - Lot of 12 FILES in Tied Case
This auction is for: a AM SWISS tie pouch of 12 files. All items are in very good condition- please see photos. Please feel free to ask any questions that you may have. High bidder to pay $0.00 shipping. It's free! All shipments within the United States have Delivery Confirmation. International buyers will be quoted a shipping cost prior to purchase. Thank you for looking and happy bidding. Please check out my other auctions for a variety of items. I am always more than happy to combine purchases.
|
|
|
CAT 50 Susta/Kennedy Plastic Socket Tool Holder (70053), Add'l items ship free
THESE RETAIL FOR OVER $10/ea. For sale are Plastic Sockets for CAT50 tool holders used in Susta/Kennedy type cabinets. These came with a cabinet that we purchased from a company. But we needed CAT40 sockets and have no use for these. They are used, but in good condition. Shipping is a $5 flat fee if you buy 1 or all 72. Which is a very good deal!
|
|
|
13" X 18" HYD‑MECH S‑20A FULLY AUTOMATIC CUT‑OFF SAW
13" X 18" HYD‑MECH MODEL S‑20A FULLY AUTOMATIC CUT‑OFF SAW YEAR: 1989 SPECIFICATIONS CAPACITY RECTANGLE: 13" X 18" ROUND: 13" DIAMETER 45 DEGREES ROUND: 12" DIAMETER 45 DEGREES SQUARE: 11" X 11" BLADE LENGTH: 13' 6" WIDTH: 1" THICKNESS: 035" BLADE SPEED: 75- 400 SFM BLADE GUIDES: CARBIDE BLADE WHEEL DIAMETER: 16" DRIVE BLADE DRIVE: 3 HP HYDRAULIC DRIVE: 2 HP HYDRAULIC SYSTEM: 500 PSI HYDRAULIC TANK CAPACITY: 7 US GALLONS COOLANT TANK: 6 US GALLONS SHUTTLE STROKE: 0- 29" SINGLE STROKE MULTI-INDEXING STANDARD VISE CONTROL: HYDRAULIC TABLE HEIGHT: 31" MAXIMUM WORK LOAD: 5.000 LBS GENERAL DIMENSIONS: 81" W X 122" L X 57" H MACHINE WEIGHT: 3.000 LBS ELECTRICS: 220 V. 3 PH, 60 CYC, 3 HP EQUIPPED WITH AUTOMATIC SHUTTLE TYPE BARFEED WITH MULTIPLE INDEX 15” X ... more32” OUTFEED TABLE WITH MATERIAL STOP PART COUNTER CHIP BRUSH POSITIVE DOWNFEED VARIABLE SPEED DRIVE COOLANT SYSTEM HIMES MACHINERY PHONE- 888-803-2496- FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
Brown Sharpe Hannon Lufkin Rule Misc LOT of Corner Levels Machinist Tool Tools
Brown Sharpe Hannon Lufkin Rule Misc LOT of Corner Levels Machinist Tool Tools This misc machinist's tool set is in good used condition. Everything pictured is included in this listing. Some tools do have initials or a name engraved. Please contact us anytime. You can bid with confidence as I am very trustworthy and take great pride in my eBay presence! With ISALESUSA you are GUARANTEED: Great communications· Smooth transactions· Speedy delivery FLAT RATE SHIPPING COSTS ARE FOR THE 48 CONTINENTAL STATES BUYERS LOCATED IN HI. AK or US TERRITORY PLEASE CONTACT US FOR A SHIPPING QUOTE! WE SHIP ITEMS OUT EVERY DAY! Monday- Friday. Any Special Shipping Requests Must Be Made Through EBay! MICHIGAN Residents will be charged MI State Tax. We Cannot Reimburse Return Shipping Costs. Thank you for looking at my listing and good luck bidding! ... moreGOD BLESS YOU AND THIS GREAT COUNTRY OF OURS! View My Other Items For Sale Visit My eBay Store
|
|
|
Electra variable torque power screwdriver model AE-8010
I do not have facilities to test this tool but I am confident it works well. It was part of a larger lot and all the other tools were in good working order. Still this tool is selling as is due to its untested state. Look closely at the photos. What you see is what you get. Happy bidding!
|
|
|
Brown Sharpe Radius Guage Tool Set in Pouch
Brown Sharpe Radius Guage Tool Set in Pouch This machinist's tool set is in good used condition. There are a couple pieces missing. Everything pictured is included in this listing. Please contact us anytime. You can bid with confidence as I am very trustworthy and take great pride in my eBay presence! With ISALESUSA you are GUARANTEED: Great communications· Smooth transactions· Speedy delivery FLAT RATE SHIPPING COSTS ARE FOR THE 48 CONTINENTAL STATES BUYERS LOCATED IN HI. AK or US TERRITORY PLEASE CONTACT US FOR A SHIPPING QUOTE! WE SHIP ITEMS OUT EVERY DAY! Monday- Friday. Any Special Shipping Requests Must Be Made Through EBay! MICHIGAN Residents will be charged MI State Tax. We Cannot Reimburse Return Shipping Costs. Thank you for looking at my listing and good luck bidding! GOD BLESS YOU AND THIS GREAT COUNTRY OF OURS! ... moreView My Other Items For Sale Visit My eBay Store
|
|
|
2004 EMCO HYPERTURN 665MC TWIN TURRET CNC LATHE / LIVE TOOLING, Y-AXIS
EMCO HYPERTURN 665MC TWIN TURRET CNC LATHE/ LIVE TOOLING. SUB-SPINDLE, Y-AXIS/ SIEMENS 840D CONTROL YEAR 2004/ MODEL: HYPERTURN 665MC/ EXCELLENT CONDITION EQUIPPED WITH SIEMENS 840D CONTROL, HAINBUCH A2-6 PULL DASH BACK STYLE COLLET CHUCK FOR MAIN SPINDLE(65MM BAR CAPACITY) HAINBUCH A2-5 DEAD LENGTH COLLET CHUCK FOR COUNTER SPINDLE(45 MM BAR CAPACITY) HAINBUCH MANUAL COLLET CHANGER, LIVE TOOLING& C-AXIS(BOTH SPINDLES) Y-AXIS, PARTS CATCHER, CHIP CONVEYOR, FMB SL-80S MAGAZINE BAR LOADER, SPINDLE CHILLER, TOOL HOLDERS, SIEMENS ELECTRONIC HAND WHEEL, PC KEYBOARD, SPECIFICATIONS SWING OVER BED: 23.6” SWING OVER CROSS SLIDE: 19.7” DISTANCE BETWEEN SPINDLE NOSES: 38.4” MAXIMUM TURNING DIAMETER: 16.6” MAXIMUM PART LENGTH: 29.3” MAXIMUM BAR STOCK DIAMETER: 2.5” TRAVEL IN X/X2: 11/8.1” TRAVEL IN Z/Z2/Z3: 35.4/29.5/29.5” TRAVEL IN Y: 3.9” +/2” ... moreSPEED RANGE(INFINITELY VARIABLE) 0-5.000 RPM, MAXIMUM TORQUE: 184.3 FT/LBS, SPINDLE NOSE: A2-6, SPINDLE DIAMETER AT FRONT BEARING: 4.1” SPINDLE BORE(EXCLUDING DRAW PIPE) 2.9” MAXIMUM BAR CAPACITY: 2.5” SPEED RANGE(INFINITELY VARIABLE) 0-7.000 RPM, MAXIMUM TORQUE: 953.8 FT/LBS, SPINDLE NOSE: A2-5, RESOLUTION: 0.001 DEGREE, RAPID TRAVERSE: 1.000 RPM, MAIN SPINDLE(AC HOLLOW-SPINDLE MOTOR) 38.9 HP, COUNTER SPINDLE(AC HOLLOW-SPINDLE MOTOR) 29.5 HP, NUMBER OF TOOL STATIONS: 2X12, VDI SHAFT: 1.2” TOOL CROSS-SECTION FOR SQUARE TOOLS: 8” X.8” SHANK DIAMETER FOR BORING BARS: 1.3” TURRET INDEXING TIME: 0.2 SEC, SPEED RANGE: 0-5.000 RPM, MAXIMUM TORQUE: 18.4 FT/LBS, DRIVE POWER: 9 HP, NUMBER OF DRIVEN TOOLS: 2X12, RAPID MOTION SPEED IN X/Z/Y/Z3: 945/1181/394/1181 IPM, FEED FORCE IN X/Z/Z3: 1121/1798/2023 LBS, TANK CAPACITY: 79 GALLONS, PUMP POWER: 2.7 X 3 HP, CONNECTED LOAD: 46 kVA, COMPRESSED AIR: 87 PSI, CENTER HEIGHT ABOVE FLOOR: 47.2″ OVERALL HEIGHT: 90.6″ REQUIRED FLOOR SPACE(W/O CHIP CONVEYOR) 133.9” X 100.4” WEIGHT: 15.432 LBS, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QU
|
|
|
Harper Harperizer barrel tumbler tumbling finish machine mill turret drum
Harper Harperizer tumbler. turret brake.Drum brake 4.132 hours on it. size is aprox 52x74x62 Machine is in good working order.
|
|
|
Star SV-32 Swiss Lathe ER-16 Two Spindle Modular Driven Toolholder 431-51-00
W&F Werkzeugtechnik- Germany ER-16 Two Spindle Modular Driven Toolholder product no. 431-51-00 fits Star SV-32 CNC Swiss Type Automatic Lathe Posted with
|
|
|
Channellock 460 4-1/4-Inch Jaw Capacity 16-Inch Tongue and Groove Plier
Channellock 460 4-1/4-Inch Jaw Capacity 16-Inch Tongue and Groove Plier. Up for auction are these Channellock 460 16" pliers in used but very good condition. These have very little signs of use. They have a 4-1/4" jaw capacity. Please see the photos for cosmetic condition. Good luck and have fun bidding! AUCTION BROUGHT TO YOU BY DOUG to check out our other auctions. If you have read the description. Checked out all of the pictures and still have questions, be sure to read our frequently asked questions PRIOR to contacting us. F.A.Q.s can be found by clicking"Ask Seller a Question" at the bottom of the page. Unless stated otherwise above. Everything in the photos and description is included. And all photographs are of the actual item being offered. Product stands used in photo displays are NOT included. Please ask any ... morequestions about this item PRIOR TO the end of the auction. You can see our full terms and conditions below. By bidding on this item. You agree to the following terms: Payment must be received within 4 BUSINESS DAYS after close of auction. After 4 business days we will file a non-paying bidder alert and re-list the auction. We accept PayPal ONLY online. We will accept cash or credit cards for in-store payments. Sales tax is applicable to Illinois residents only. SHIPPING TERMS• ALL shipping costs are non-negotiable. Insurance is INCLUDED for ALL packages regardless of carrier. We will only ship to a PayPal-registered address associated with the PayPal account being used. International shipping is not offered. SHIPPING CARRIERS UPS UPS does not deliver to P.O. Boxes or FPO/APOs. No exceptions. Please supply a PHYSICAL ADDRESS for delivery. Shipment to Hawaii. Alaska& U.S. Territories are subject to increased costs. All items over $250 must be shipped with Signature Delivery Confirmation. USPS ALL items shipped via U.S. Postal Service are shipped via First Class. Priority or Media Mail Services, each with Delivery Confirmation. Delivery time is 3-10 business days. PLEASE NOTE: w
|
|
|
Lot 5x Unique Machinist Tools
Here we have a lot of 5 random machinist items I have accumulated. Very interesting pieces and I am honestly really am not sure what they are. There is one USAF piece that no one has been able to identify. All of these pieces are very well machined and look great on a desk. But I really don't have enough room on mine! Good luck bidding! Bid with assurance that my 100% positive feedback will deliver the item you are bidding on in the condition that you see it in the photographs. If there are any measurement items, or scale reference items, random debris, etc obviously those aren't included in this auction. I will combine shipping so please look at my other auctions- please allow time for an invoice if you buy multiple items so that shipping charges will update. Please let me know if you have any questions and I wish you the best in ... morewinning the item! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
7x misc machinist setup / measurement blocks
Here are some random machinist set up blocks/ sine block. Some are marked starrett. Good quality vintage machinist tools. Bid with assurance that my 100% positive feedback will deliver the item you are bidding on in the condition that you see it in the photographs. If there are any measurement items. Or scale reference items, random debris, etc obviously those aren't included in this auction. I will combine shipping so please look at my other auctions- please allow time for an invoice if you buy multiple items so that shipping charges will update. Please let me know if you have any questions and I wish you the best in winning the item! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4x machinist magnetic indicator bases
Here is an auction for 4x magnetic indicator clamp bases. I have verified that they all turn on with the switch. Look good. At least one is US. Bid with assurance that my 100% positive feedback will deliver the item you are bidding on in the condition that you see it in the photographs. If there are any measurement items. Or scale reference items, random debris, etc obviously those aren't included in this auction. I will combine shipping so please look at my other auctions- please allow time for an invoice if you buy multiple items so that shipping charges will update. Please let me know if you have any questions and I wish you the best in winning the item! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4x 123 Machinist Blocks
Up for auction are 2 pairs of matches 123 blocks. Very well made pieces as you see from the photographs. Bid with assurance that my 100% positive feedback will deliver the item you are bidding on in the condition that you see it in the photographs. If there are any measurement items. Or scale reference items, random debris, etc obviously those aren't included in this auction. I will combine shipping so please look at my other auctions- please allow time for an invoice if you buy multiple items so that shipping charges will update. Please let me know if you have any questions and I wish you the best in winning the item! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
FCU7 Meldas Mazak Mitsubishi CNC Control Card FCU7-HN624
ebay template FCU7 Meldas Mazak Mitsubishi CNC Control Card FCU7-HN624. FCU7 Meldas Mazak Mitsubishi CNC Control Card FCU7-HN624 PN# FCU7 HN624 PULLED FROM A WORKING ENVIRONMENT GUARANTEED NOT DOA We will attempt to ship your item within 24 hours after payment has been received.excluding weekends) We ONLY ship to the USA lower 48 states. Shipping rates quoted in the auction are for the lower 48 states Only. ONLY items under 3 pounds can be shipped to a PO Box. Applicable sales taxes will be added to shipments within the state of Kentucky. Local pickups at our Florence. KY facility are always welcome. We do not charge any pickup fees. Kentucky Sales Tax is due for all local pickups. We accept Paypal. Or cash(for local pickups) ONLY. Winning bidder must make payment arrangements within 10 DAYS. If payment has not been received within 10 DAYS ... moreof auction close. The item will be relisted. This item comes with a 14 Day Parts and Labor Warranty. If any hardware failure occurs within 14 days we will repair or replace the unit. Software issues such as Virus and Spyware infections are not included. For additional information or driver downloads please visit If you are in need of Technical Support or assistance with an item please use our Help Desk: It is our goal to turn every bidder into a repeat buyer. Unless specifically stated otherwise. All merchandise is GUARANTEED to be as described and to be in working order upon arrival. Powers Your Online Marketplace Reach your goals with Kyozou eBay Selling Tools
|
|
|
Instro 2716-010 Max Load 5KN
Good Condition. Instro 2716-010 Max Load 5KN, Working, Buyer pays 0.00 dlls shipping and handling in Continental US except Alaska(R2-F4)ILAB3804)Abril13)
|
|
|
2008 SUNNEN HORIZONTAL TUBE HONE SYSTEM / EXTENSIONS & EXTRA'S - EXCELLENT
SUNNEN HORIZONTAL TUBE HONING MACHINE MODEL HTB-2000S/ NEW 2008/ EXCELLENT CONDITION MAXIMUM STROKE LENGTH- 78.74" INSIDE DIAMETER RANGE(CONTINGENT ON APPLICATION) 1" TO 22.5" SPINDLE SPEED RANGE(HIGH TORQUE SPINDLE DRIVE) 13 TO 180 RPM STROKE SPEED RANGE- 3 TO 120 FPM SPINDLE DRIVE MOTOR- 4 HP A.C. STROKER MOTOR- 4.4 HP SERVO DRIVE APPROXIMATE MACHINE WEIGHT- 4.851 LBS APPROXIMATE MACHINE DIMENSIONS- 244"LR) X 47"FB) X 59"H) EQUIPPED WITH- SIEMENS TOUCH SCREEN PLC CONTROL MPS ELECTRONIC FEED SYSTEM COOLANT FILTRATION SYSTEM WITH PAPER FILTER& MAGNETIC SEPARATOR#HT350 LARGE DIAMETER WORK HOLDING FIXTURE( 13.8" TO 23.6" MPS-H200 HONE HEAD ASSEMBLY( 8" TO 11.5" RANGE) JS9X-1 CAGE ASSEMBLY#JS9X-45 STONE& GUIDE EXTENSION KIT#MPS-M1880 DOUBLE LENGTH STONE& GUIDE MASTER HOLDER#GNR DRIVE& ... moreFEED EXTENSION. 48" MPS-1720A INPUT ADAPTER#MPS-1740A OUTPUT ADAPTER. REPLACEMENT COST BRAND NEW- $134.000.00) HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
CURVIT HORIZONTAL SPINDLE COILER #D-145 - GEAR REDUCER - TOOLING
CURVIT HORIZONTAL SPINDLE COILER Model# D-145 CAPACITY: 1/2" Solid(Cold Rolled Steel) 3/8" Solid Square(Cold Rolled Steel) 3/4" Steel Tubing. 1" Copper or Aluminum Soft Tubing. 3/8" Standard Steel Pipe. 1" x 1/2" x 1/8" Channel Steel. 5/8" x 5/8" x 1/8" Angle Steel. 1/4" x 1" Flat Bar( 1/8" x 3/4" Flat Bar( EQUIPPED WITH Air Powered Radius Gage with Adjustable. Mechanical, Screw Stop for Diameter or Radius Sizing. 50 to 1 Heavy Duty Gear Reducer. Variable Speed Drive Varies Spindle Speeds by a Ratio of 2 to 1. Welded Frame Construction. Operator Control Stand. Assorted Tooling. Wired for 3 Phase. 60 Cycle, 220 Volts. DIMENSIONS Overall Size: 60" L-R x 36" F-B x 80" H x 1.680 Lbs. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- ... moreCLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
TAFT PEIRCE MODEL 1 MANUAL SURFACE GRINDER, 5" X 12"
TAFT PEIRCE MODEL 1 MANUAL SURFACE GRINDER. 5" X 12" SPECIFICATIONS: TABLE WORKING SURFACE: 5" X 12" TABLE OVERALL: 33-1/4" X 8" T-SLOT IN TABLE CENTER: 1/2" TABLE HEIGHT ABOVE FLOOR: 38-1/4" TABLE HEIGHT ABOVE FLOOR W/SUB-BASE: 42-1/4" WORK HEIGHT UNDER WHEEL: 12" WHEEL: 7" O.D. X 1/2" HOLE 1-1/4" TABLE TRAVEL(LONGITUDINAL) 13-1/2" 3.4" PER REV. OF HANDWHEEL TABLE TRAVEL(CROSSFEED) 5-1/2" 0.100" PER REV. OF HANDWHEEL WHEEL HEAD TRAVEL(VERTICAL) 12" 050" PER REV. OF HANDWHEEL WHEEL HEAD TRAVEL(MAX. TILT) 30 DEGREES DIMENSIONS: 36" L-R. 36" F-B, 60" H WEIGHT: 1507 LBS. EQUIPPED WITH: 5" X 12" PERMANENT CHUCK TILT HEAD ONE SHOT LUBE BUILT IN WORK LIGHT. CONTACT: HIMES MACHINERY PHONE- 515-509-7772
|
|
|
3/4″ PINES HORIZONTAL BENDER w/ MANDREL EXTRACTOR
3/4″ PINES HORIZONTAL BENDER- MODEL 34266 SPECIFICATIONS BENDER SIZE: ¾” BENDING ROTATION: COUNTER-CLOCKWISE, MAXIMUM RADIUS OF BEND: 10″ PUMP MOTOR: 5 HP, MAXIMUM PRESSURE: 1.000 PSI, FORWARD SPINDLE SPEED: 27.2 RPM, REVERSE SPINDLE SPEED: 27.2 RPM, SPINDLE TORQUE: 1.240 FT/LBS, CHAIN PITCH: 1-1/4” BENDING CYLINDER: SW-1895, CLAMP CYLINDER: SX-3914, INDEX CYLINDER: SX-3836, MANDREL EXTRACTOR CYLINDER: SW-2784, DIMENSIONS: 19’ LR X 3’ FB X 3’ H, ELECTRICS: 440 VOLTS. 3 PH, 60 CYC, MANDREL EXTRACTOR, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
MAGCOA HEAVY DUTY MATERIAL HANDLING DOLLEY / HAND TRUCK
aims MAGCOA HEAVY DUTY MATERIAL HANDLING DOLLEY/ HAND TRUCK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Magcoa. This is a used Heavy Duty Material Handling Dolley/ Hand Truck in good condition. Specifications: Overall Dimensions: 17" x 16" x 47" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. MAGCOA HEAVY DUTY MATERIAL HANDLING DOLLEY/ HAND TRUCK Reliable Tool Inc. c 2011 | Powered by
|
|
|
Indramat Power Supply TVM2.1-050-220/300-W1/115/220
Indramat power supply. Signs of wear. Guaranteed not to be DOA. Buyer pays return shipping
|
|
|
Criterion DBL-203D Boring Head with R8 Shank machinist tool
3 inch Criterion boring head for 3/4 inch boring bars with R8 shank on the head. It has 1 1/2- 18 thread. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-140547861e5-0xfb-
|
|
|
Armstrong Machinist Vise
Here is a nice armstrong machinist vise for sale. Very well made piece. Will update with measurements. Bid with assurance that my 100% positive feedback will deliver the item you are bidding on in the condition that you see it in the photographs. If there are any measurement items. Or scale reference items, random debris, etc obviously those aren't included in this auction. I will combine shipping so please look at my other auctions- please allow time for an invoice if you buy multiple items so that shipping charges will update. Please let me know if you have any questions and I wish you the best in winning the item! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14055d72575-0xf3-
|
|
|
PRECISION INDEXING WHEEL KNOB HANDLE FOR MACHINERY
aims PRECISION INDEXING WHEEL KNOB HANDLE FOR MACHINERY read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Wheel Knob Handle for Machinery in good condition. Replacement handles for machinery wheels like industrial grinders. Lathes, etc. Specifications: Arbor: 5/8" Round Hub: 3" Wheel Diameter: 6-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION INDEXING WHEEL KNOB HANDLE FOR MACHINERY PRECISION INDEXING WHEEL KNOB HANDLE FOR MACHINERY Reliable Tool Inc. c 2011 | Powered by
|
|
|
PAIR OF HEAVY DUTY STEEL TURNBUCKLES
aims PAIR OF HEAVY DUTY STEEL TURNBUCKLES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 2 Steel Turnbuckles in good condition. Specifications: Eye Diameters: 1-1/2" Current Length: 48" Approx. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF HEAVY DUTY STEEL TURNBUCKLES Reliable Tool Inc. c 2011 | Powered by
|
|
|
HEAVY DUTY INDUSTRIAL CYLINDRICAL FAN BLADE - 15" DIAMETER
aims HEAVY DUTY INDUSTRIAL CYLINDRICAL FAN BLADE- 15" DIAMETER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an Industrial Fan Blade in Great Condition. Specifications: Diameter: 15" Mount Diameter: 1-1/8" Overall Length: 15" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HEAVY DUTY INDUSTRIAL CYLINDRICAL FAN BLADE- 15" DIAMETER HEAVY DUTY INDUSTRIAL CYLINDRICAL FAN BLADE- 15" DIAMETER Reliable Tool Inc. c 2011 | Powered by
|
|
|
U.S.A.!!! 8 HEAVY DUTY STEEL TURNBUCKLES
aims U.S.A. 8 HEAVY DUTY STEEL TURNBUCKLES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 8 Steel Turnbuckles in good condition. Specifications: Eye Diameters: 5/8" to 3/4" Length Capacities: 22" Approx. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A. 8 HEAVY DUTY STEEL TURNBUCKLES Reliable Tool Inc. c 2011 | Powered by
|
|
|
SIEMENS SIMATIC S5 6ES5 482-8MA13 DI/DO MODULE ( 6ES5482-8MA13 )
Automation Restore SIEMENS SIMATIC S5 6ES5 482-8MA13 DI/DO MODULE Condizione prodotto: Oggetto è usato. Funzionante in ottime condizioni. Condition Item: The item is used. Fully functiona l in excellent condition like new. Descrizione Vendita: D escription sale: n° 1 SIEMENS SIMATIC S5 6ES5 482- 8MA13 Version: 3 Funzionante Tested& working- Testato da Automation Restore- Tested by Automation Restore Warranty Automation Restore. For more info read paragraph warranty. L'oggetto è usato e quindi presenta alcuni normali segni di usura. Viene venduto come da foto(solo indicativa) The object is used and therefore has some normal signs of wear. It is sold as photos(only indicative) Leggi i nostri servizi aggiuntivi Do you need a technician to install your product? Read our additional services Leggi le nostre spedizioni Do ... moreyou need a fast ship in 24/48h? Read our shipments Non esistate a contattarci per qualasiasi informazione o dubbio! Do not hesitate to contact us for more information! Grazie e Cordiali Saluti Thanks and Best Regards Contacts +39 3404955763 TEMPI PAGAMENTO: dovrà essere effettuato entro 3 giorni dalla data di acquisto. Per evitare l’annullamento della vendita e la segnalazione ad eBay. TIME PAYMENT: must be made within 3 daysfrom the date of purchase to avoid the cancellation of the sale and report to eBay. TIPOLOGIA PAGAMENTO: è preferito PayPal. Che garantisce una protezione gratuita agli acquirenti. Sono accettati inoltre pagamenti tramite bonifico bancario. Vaglia postale, carta di credito, contanti o altro a scelta del cliente. Per ulteriori informazioni o richieste particolari contattateci. PAYMENT TYPE: PayPal is preferred. Which guarantees free protection to buyers. We accept also payment by bank transfer. Postal order, credit card, cash or other chosen by the customer. For more information or special requests contact us FATTURAZIONE: Automation Restore fornisce tutti i prodotto con regolare fattura. i prezzi indicati sono iva compresa. I titolari di partita iva
|
|
|
Machinist Tool Lot cutters taps mills reamers etc
Large Machinist tool cutter reamer etc lot. Makers like Union Twist Drill. Lavallee, etc. Most are in unused condition. I am not a machinist so I am not sure of the the various uses or applications.
|
|
|
DoAll Sine Plate
Sine plate with guage block assortment. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-140595949c7-0xf9-
|
|
|
MERLIN GERIN VIGI C 60 0,300 A 3 POLE POLO 26622
MERLIN GERIN VIGI C 60 0.300 A 3 POLE POLO 26622. 3 meses de garantia. Se aceptan devoluciones.
|
|
|
KAISER, ROTARY SCREW AIR COMPRESSORS, 75HP, CS90, (2) FOR 1 MONEY
MODEL CS 90 75 HP WIRED 440 VOLT 330009. 20847 HOURS CHECKED OUT BY LOCAL SERVICE COMPANY. SPOKE HIGHLY OF THE CONDITION WELL MAINTAINED NO ISSUES CUSTOMER DID NOT NEED THE HP FOR HIS PLANT 2 AVAILABLE WOULD LIKETO SELL THE PAIR AS A LOT
|
|
|
DeVlieg Micropoint Tool Grinder (Inv.29331)
DeVlieg Micropoint Tool Grinder(Inv.29331) S/N 741-300(Inv.29331) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. ... moreView My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
MERLIN GERIN C60N C 16 + VIGI C 60 0,030A MAGNETOTERMICO CIRCUIT BREAKER 4 POLE
MERLIN GERIN C60N C 16 + VIGI C 60 0.030A MAGNETOTERMICO CIRCUIT BREAKER 4 POLE 3 meses de garantia. Se aceptan devoluciones.
|
|
|
Interapid 312B-20 001" dial test tool Swiss
light use.it is not engraved. face cover is a little foggy near the top. in a Interapid. case.works.returns properly.Swiss made. Connecticut buyers to pay 6.35% sales tax. I will combine.Handling$1 per Ebay item) Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
INTERRUPTOR SECCIONADOR 63 A 4 POLOS TIPO S23b/4 VINTAGE
INTERRUPTOR SECCIONADOR 63 A 4 POLOS TIPO S23b/4 VINTAGE GARANTIA: 3 MESES SE ACEPTAN DEVOLUCIONES: 2 MESES
|
|
|
Machinists 8/7FP Buy Now Never Used?? USA Die Makers Nibbler
Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ ... moreall of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this s
|
|
|
BRIDGEPORT PRECISION DIAL 200 GRADUATION w/ HOLDER + LOCK NUT
aims BRIDGEPORT PRECISION DIAL 200 GRADUATION w/ HOLDER + LOCK NUT read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A by Bridgeport. This is a Bridgeport Precision Dial with Holder and Lock Nut in Good condition. In shop after shop all over the entire world the Bridgeport Milling Machine has been the basic machine tool for over thirty years.Its performance and economy are surpassed only by its versatility. For this compact machine can perform almost every machining operation required by the average shop. Bridgeport Machines are sold nationally through a network of representatives and machine tool distributors. Who are unusually skilled in the techniques of modern machining and parts processing. There's a Bridgeport representative in your area ready to provide you with prompt ... moreefficient service. Specifications: Review Pictures Carefully! please verify or inspect machine first hand. The machine can be inspected by appointment. Graduations: 200. Diameter: 3-1/4" Overall Dimensions: 3-1/4" D x 2-1/4" H. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BRIDGEPORT PRECISION DIAL 200 GRADUATION w/ HOLDER + LOCK NUT Reliable Tool Inc. c 2011 | Powered by
|
|
|
Clausing 6 x 18 Hydraulic Surface Grinder - Automatic Incremental Downfeed
Clausing Jakobsen 618 Hydraulic Surface Grinder Model Number: SJ618- Serial Number: PQ1019- Mfg: 10-85 Specifications: Travel of table: Longitudinal. 20" Cross. 7 1/8" Maximum travel under wheel. 12" Wheel size. 8" x ¾" x 1 ¼" Hydraulic motor. 2.2 KW Dimensions. 163" x 46" x x73" Approximate weight. 2.500 lbs Equipped With: 6 x 18 Walker fine pole electromagnetic chuck Overhead wheel dresser Automatic incremental down feed Coolant HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
4" OSTER PIPE THREADER MODEL 714 - CUT OFF, REAMING, CHAMFERING ATTACH. DIES
4" OSTER MODEL 714 PIPE THREADER S/N 714-RG-12 STANDARD PIPE RANGE- 1" TO 4" EXTRA PIPE RANGE- 1/2" AND 3/4" STANDARD BOLT RANGE- 3/4" TO 3" CARRIAGE TRAVEL- 15" MOTOR- 3 HP 220/440/3/60 APPROXIMATE MACHINE WEIGHT- 3.000 LBS EQUIPPED WITH- CUT OFF. REAMING AND CHAMFERING ATTACHMENTS 3 JAW UNIVERSAL FRONT CHUCK UNIVERSAL REAR CENTERING CHUCK HIGH SPEED STEEL DIES. HIMES MACHINERY- PHONE- 888-803-2496 FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
BALDOR 12" Pedestal Grinder - 3HP - Dust Collector
Order No S212108, Type Pedestal Grinders, Mfg Baldor, Model 1216W, Size 12 in. Serial No P6-94, Details• Wheel size capacity: 12 in. x 2 in. x 1-1/4 in. Two lighted eye shields• Two adjustable work rests: 2-1/4 in. x 5-1/2 in. Rear mounted dust collector• Two tool trays• Pedestal stand• One Water pot• Supplied with one grinding and two wire wheels, Electrical 3 HP; 230/460/3/60, Condition Good, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
5 X 27 K O LEE TOOL & CUTTER GRINDER - TAP GRINDING FIXTURE MODEL-BAH 860 -
K O LEE MODEL BAH 860 TOOL& CUTTER GRINDER. 5-1/4" X 27-1/4" S/N 5739 SPECIFICATIONS DISTANCE BETWEEN TAILSTOCK: 22" DISTANCE BETWEEN CENTERES IN WORKHEAD AND TAILSTOCK: 16" DISTANCE BETWEEN COLLET IN WORKHEAD AND TAILSTOCK: 17" DISTANCE BETWEEN B946 CHUCK FACE AND TAILSTOCK(1" HOLE THROUGH CHUCK) 15-1/2" TABLE WORKING SURFACE: 5-1/4" X 27-1/4" SUB TABLE: 8" X 38" TOTAL CROSSFEED MOVEMENT: 7-1/4" FEED PER REVOLUTION OF HANDWHEEL: 100" TABLE TRAVERSE: 14" FAST FEED PER REVOLUTION OF HANDWHEEL: 2-13/18" SLOW FEED PER REVOLUTION OF HANDWHEEL: 8/15" RATIO-FAST: SLOW: 5:1 VERTICAL MOVEMENT OF COLUMN: 7" FEED PER REVOLUTION OF HANDWHEEL: 040 COLUMN DIAMETER: 4" SWING OVER TABLE: 8-1/4" MINIMUM DISTANCE CENTERLINE OF WHEEL SHAFT TO TOP OF TABLE: 3-1/4" ... moreMAXIMUM DISTANCE CENTERLINE OF WHEEL SHAFT TO TOP OF TABLE: 10-3/4" MAXIMUM DISTANCE FROM COLUM TO OUTSIDE OF STRAIGHT WHEEL; DIVETAIL SLIDE NOT EXTENDED SPINDLE 90° TO TABLE: 3-3/4" MAXIMUM DISTANCE FROM COLUM TO OUTSIDE OF STRAIGHT WHEEL; DOVETAIL SLIDE EXTENDED SPINDLE 90° TO TABLE: 9-15/18" CENTERLINE HEIGHT OF FIXTURES TO TOP OF TABLE: 4.130" TABLE T-SLOT: 7/18" TABLE SWIVELS(CALIBRATION 3" PER FT. 15° EITHER SIDE OF CENTER) 225° WHEEL HEAD SWIVEL: 360° MOTOR SPEED 3450 RPM MAXIMUM ID DEPTH HOLE SIZE 9/32" TO 2" CAPACITY WITH STANDARD ARBORS: 1-1/4" MAXIMUM CROSSFEED SURFACE GRINDING GRINDING WHEEL HOLE SIZE: 5/8" NET WEIGHT: 1140 LBS ELECTRICS 220 VOLTS. 3 PH 60 CYC EQUIPPED WITH: B7047 TAP GRINDING FIXTURE TAILSTOCK WORKLIGHT. HIMES MACHINERY PHONE- 888-803-2496 WEBSITE- FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
WELDING POSITIONER SLIDING BASE / SUPPORT TAILSTOCK - SHOT PIN LOCK
WELDING POSITIONER SLIDING BASE/ SUPPORT TAILSTOCK Is Used in Welding Operation and other Work Positioning. Diameter of Faceplate: 31-1/2" Shot Pin Locking to Faceplate(Air Actuated) Diameter of Shot Pin: 2-3/8" Max. Swing Over the Floor Sitting on the 8" High Base: 118" Max. Swing Over the Base: 102" Base Size: 111" Long x 24" Wide x 8" High. Travel of Tailstock on Base: 79" Manual Traverse of Tailstock on Base& Manual Clamping. Base has(4) Pair of Feet with Hold Down Holes& Threaded Holes for Leveling Screws. Rotary Ground Cable Connection on Rear of Rotating Spindle. Approx. 30' Long Ground Cable. Overall Dimensions: 111" Long x 31-1/2" Wide x 75" High. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
MAZAK FJV35/80 CNC BRIDGE TYPE VERTICAL MACHINING CENTER - TOOLING
MAZAK FJV35/80 CNC BRIDGE TYPE VERTICAL MACHINING CENTER NEW 1998- EXCELLENT CONDITION TABLE SIZE- 30" X 88" TABLE TRAVEL- X AXIS) 78.74" HEAD CROSS TRAVEL- Y AXIS) 31.49" HEAD VERTICAL TRAVEL- Z AXIS) 23" DISTANCE SPINDLE NOSE TO TABLE TOP- 7.8" 30.9" DISTANCE BETWEEN COLUMNS- 34.65" TABLE LOAD CAPACITY- 6.510 LBS. RAPID TRAVERSE RATE- X AXIS) 1260 IPM RAPID TRAVERSE RATE- Y AXIS) 945 IPM CUTTING FEED RATES- Z AXIS) TO 708 IPM SPINDLE NOSE- CAT#50 TAPER SPINDLE SPEED- TO 6.000 RPM NUMBER OF RANGES- 2 TOOL MAGAZINE- 40 ATC MAIN DRIVE MOTOR- 35 HP A.C. APPROXIMATE MACHINE WEIGHT- 31.973 LBS APPROXIMATE MACHINE DIMENSIONS- 251"LR) X 106"FB) X 120"H) EQUIPPED WITH: MAZATROL M-PLUS COLOR CONVERSATION CONTROL COOLANT THRU SPINDLE CHIP CONVEYOR TOOLING ALL AVAILABLE MANUALS. HIMES MACHINERY ... morePHONE- 888-803-2496- FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-1405ad16e35-0xff-
|
|
|
2001 Chevalier 6 X 18 Surface Grinder - Model # FSG-618M
Order No S212111, Type Surface Grinders, Mfg 2001 Chevalier, Model FSG-618M, Size 6 in. x 18 in. Serial No A3901018, Details• All manual operation• Grinding capacity: 6 in. x 18 in. Permanent magnetic chuck: 6 in. x 18 in. Grinding wheel size 8 in. x 1/2 in. x 1-1/4 in. Longitudinal travel: 19 in. Cross travel: 7 in. Adjustable table dogs• Cross feed dial increments.0005 in. Down feed dial increments.0001 in. Spindle RPM 3450• Work light• Tool box Electrical 2 HP; 220/440/3/60, Condition Excellent, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
20" X 80" TOS GAP BED LATHE - 1999 - Model # SN50C
20" X 80" TOS GAP BED LATHE New 1999- Model# SN50C Swing Over Ways: 20" Swing Over Cross Slide: 10-3/4" Swing in Gap: Approx. 29" Distance from Spindle Nose to End of Gap: 13" 24) Spindle Speeds: 22.4 to 2000 RPM. Spindle Nose: D1-6. Spindle Bore: 2-3/16" Feeds: 002 to.195 TPR. Inch Threading: 1 to 52 TPI. Metric Threads: 5 to 40 TPMM. Quill in Tailstock: 2-3/4" Dia. Quill Travel: 7" 5 MT in Quill. EQUIPPED WITH: 12-3/4" 3-Jaw Chuck with 2-Piece Jaws. 10" Roller Steady Rest& Follow Rest. Full Length Rear Splash Guard. 1) Bull Nose Center. 10 HP Motor. Wired 3 Phase, 60 Cycle, 220 Volts. Overall Size: 12' L x 50" W x 5' H. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
33 TON STRIPPIT FABRICENTER CNC TURRET PUNCH PRESS - FANUC CONTROL - TOOLING
33 TON STRIPPIT#FC1000XT FABRICENTER CNC TURRET PUNCH PRESS MODEL FC1000XT- NEW 1988 CAPACITY- 33 TON MAXIMUM MATERIAL THICKNESS- 250" THROAT DEPTH- 40" WORKPIECE SIZE- 39.3" X 48" WORKPIECE SIZE W/PROGRESSIVE MOVE- 39.3" X 96" MAXIMUM HOLE DIAMETER- 3.5" MAXIMUM HIT RATE. 1" CENTERS- 200 HPM BI-DIRECTIONAL TURRET ROTATION ONE STATION INDEX TIME- 1.2 SECONDS APPROXIMATE MACHINE WEIGHT- 22.500 LBS APPROXIMATE MACHINE DIMENSIONS- 106"LR) X 186"FB) X 94"H) EQUIPPED WITH- FANUC GN6( 6T) CNC CONTROL AUTOMATIC REPOSITIONING 24 STATION TURRET HYDRAULIC CLUTCH AND BRAKE SERVO DRIVES MISCELLANEOUS TOOLING HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
HITACHI SEIKI HPV-23 CNC LATHE - 3" BORE - QUICKLOAD BARFEED - CHIP CONVEYOR
HITACHI SEIKI HPV-23 CNC LATHE- YASNAC i80 CONTROL. 2.75” BAR HTS-3315HL- NEW: 1996 SPECIFICATIONS CAPACITY MAXIMUM SWING: 18" MAXIMUM CUTTING DIAMETER: 10” W/O INTERFERENCE MAXIMUM CUTTING DIAMETER: 14.5” BAR CAPACITY: 2.75" STROKE X-AXIS TRAVEL: 8.1" Z-AXIS TRAVEL: 15.7” SPINDLE SPINDLE SPEED: 20– 3600 RPM SPINDLE NOSE: A2-8 SPINDLE BORE: 3.0” SPINDLE BEARING. ID: 4.30” TURRET STYLE OF TURRET: BASE HOLDER TYPE NUMBER OF POSITIONS: 10 TOOL SIZE. OD: 1” TOOL SIZE. ID: 1.5” INDEX TIME: 1 SECOND(ADJACENT TOOL) RAPID TRAVERSE X-AXIS: 984 IPM Y-AXIS: 1181 IPM MOTOR SPINDLE: 20 HP FEEDS: 1.4 HP HYDRAULIC: 25 HP GENERAL DIMENSIONS: 8' LR X 6'3” FB X 6'6” H WEIGHT: 10.560 LBS ELECTRICS: 220 VOLTS. 3 PH, 60 CYC EQUIPPED WITH: YASNAC i80 CONTROL BLOCK TYPE TURRET S-26 COLLET CHUCK TOOL PROBE TOOL HOLDERS PARTS CATCHER LNS ... moreQUICKLOAD BARFEED CHIP CONVEYOR HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
1994 GIDDINGS & LEWIS 4-AXIS CNC LATHE - LIVE TOOLING - 6.5" BORE - FANUC 15T
GIDDINGS& LEWIS 4-AXIS CNC LATHE WITH LIVE TOOLING New 1994- Model: Smartturn H15* Upgraded in 1999 with Fanuc 15T Control& Fanuc Drives Swing Over Way Covers: 33.16" Swing Over the Carriage: 21.1" Maximum Turning Diameter: 21" Distance Between Centers: 60" X-Axis Cross Slide Travel of the Upper& Lower Turrets: 12.28" Spindle Speeds: To 1100 RPM Via 2-Speed Gear Box& 2-Speed 42 KW Motor. Spindle Bore: 6-1/2" Spindle Nose: A2-15. 12-Position Top Turret. 12-Position Bottom Turret. C-Axis with.001 Degree Indexing& C-Axis Contouring. Towable Tailstock with 5-1/2" Diameter Quill with 6" of Quill Travel& 5 MT. 42 KW/56 HP. 3 Phase, 60 Cycle, 460 Volt Spindle Drive Motor. 4 Coromant Capto Live Tool Holders to 4000 RPM. VDI Style Tooling System. Approx. 10 Tool Holders. 24" Cushman ... more3-Jaw Power Chuck& Power Wrench with 8" Thru Hole. X-Axis Linear Scale. Z-Axis Rotary Encoder. Tool Probe. Trabon Auto Lube System. 4-Drawer Vidmar Cabinet with Misc. New Spare Parts& Control Boards. Hydraulic Follow Rest. Machine Manuals. $5.200 Spent in 2012 to Rebuild Cushman Chuck. DIMS Machine Overall Dimensions: 23-1/2' L x 10' W x 91" H. Machine Weight: Approx. 42.000 Lbs. Machine is in Good Working Condition/ Just Taken from Service. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
BRIDGEPORT SERIES II *SPECIAL VERTICAL MILL - Servo 150 Longitudinal Power Feed
BRIDGEPORT SERIES II SPECIAL VERTICAL MILL Model: Series II Special Table Size: 11" x 58" Longitudinal Travel: 32" Cross Travel: 15" Quill Diameter: 3-3/8" Quill Travel: 5" Power Down Feed: 0015. 003, 006 IPR. Knee Travel: 16" Ram Travel: 18" Throat: 6" Min. to 22" Max. Spindle Taper: R8. EQUIPPED WITH: Servo 150 Longitudinal Power Feed. Lower Control Box. One Shot Lube. 2 HP Main Motor. Wired for 3 Phase. 60 Cycle, 220/440 Volts. Overall Size: 80" L-R x 72" F-B x 84" H. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
BUFFALO #1BR MECHANICAL VERTICAL ANGLE BENDING ROLL -
BUFFALO MECHANICAL VERTICAL ANGLE BENDING ROLL New 1962/ Model# 1BR Top Roll Diameter: 11-1/2" Diameter of Bottom Rolls: 11-5/8" Upper Shaft Diameter: 4-1/2" with 7/8" Drive Key. Diameter of Lower Shafts: 3-3/4" with 7/8" Drive Key. Lower Roll Centers: 12" Manual Height Adjustment of Upper Roll. Manual Vertical& Lateral Adjustment of Guide Rolls. 1) Set of Angle Rolls. Misc. Spacer Plates. 1) Set of Radius Rolls. 10 HP Motor. Wired 3 Phase, 60 Cycle, 220 Volts. Forward& Reversing. Vari Speed Controlled by Drum Switch. Machine Dimensions: 90" F-B x 55" W x 51" H. Rolling Capacity: 3" x 3" x 3/8" Angles: Leg Out. Minimum Diameter 24" 3-1/2" x 3-1/2" x 5/16" Angles: Leg Out. Minimum Diameter 36" 2-1/2" x 2-1/2" x 3/8" Angles: Leg ... moreIn. Minimum Diameter 30" 3" x 3" x 5/16" Angles: Leg In. Minimum Diameter 36" Smallest Angle. Leg Out: 1-1/2" x 1-1/2" x 3/16" Minimum Diameter 13" Smallest Angle. Leg In: 1-1/2" x 1-1/2" x 3/16" Minimum Diameter 14" Flats on Edge: 3" x 5/8" Minimum Diameter 36" Flats on Flat: 6" x 1" Minimum Diameter 24" Round Bar: 2" Minimum Diameter 24" Square Bar: 1-3/4" Minimum Diameter 24" HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
1998 MATSUURA CNC VERTICAL MACHINING CENTER - TOOLING - EXCELLENT !!
MATSUURA MODEL RA-1G VERTICAL MACHINING CENTER NEW 1998- EXCELLENT CONDITION SPECIFICATIONS MOVEMENT& RANGES X-AXIS TRAVEL: 20" Y-AXIS TRAVEL: 15.7” Z-AXIS TRAVEL: 18.1" TABLE WORKING SURFACE: 14.9”X 24.9” MAXIMUM LOAD ON TABLE: 880 LBS T-SLOT: 11/16” X 3 X 5 PALLET PALLET WORKING SURFACE: 23.6” X 14.9” PALLET LOADING CAPACITY: 550 LBS TAPPED HOLES: 5/8” 11X42 CENTER HOLE SIZE: 2” FEEDRATE RAPID TRAVERSE RATE(X/Y/Z) 1181/1184/945 IPM FEEDRATE(X/Y/Z) 0.1– 393.7 IPM JOG FEEDRATE: 0-157 IPM AUTOMATIC PALLET CHANGER NUMBER OF PALLETS: 2 METHOD OF PALLET CHANGE: SHUTTLE TYPE PALLET CHANGING TIME: 9 SECONDS PALLET CLAMPING FORCE: 3525 LBS MOTORS SPINDLE DRIVE MOTOR: 10 HP X-AXIS FEED MOTOR: 1.75 HP Y-AXIS FEED MOTOR: 1.75 HP Z-AXIS FEED MOTOR: 3.9 HP ELECTRICS: 200 VOLTS. 3 PH, 60 CYC EQUIPPED WITH MATSUURA YASNAC I80 CONTROL DUAL ... morePALLET CHANGER 30 POSITION TOOL CHANGER- FULL COMPLEMENT OF HOLDERS BT-40 SPINDLE COOLANT FULL ENCLOSURE STEVENS SUB-PLATE TOOL TOUCH PROBE. HIMES MACHINERY PHONE- 888) 803-2496- FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery HIMES MACHINERY EBAY STORE- http:stores.ebay.com/Himes-Machinery
|
|
|
6 x 12 K O LEE SURFACE GRINDER - MODEL S612
K O LEE MODEL S612 SURFACE GRINDER. 6” X 12” SPECIFICATIONS TABLE WORKING SURFACE(T-SLOT. 7/16” WIDE) 13-1/2” X 6” GRINDING WHEEL: 8” X 3/4” X 1-1/4” SPINDLE SPEED: 2850 RPM, LONGITUDINAL: 14” CROSSFEED: 7-1/8” DISTANCE TOP SURFACE OF TABLE TO CENTERLINE OF SPINDLE: 3-5/8” MINIMUM, 16” MAXIMUM, VERTICAL: 0001” CROSSFEED: 001” ELECTRICS: 220 V. 3 PH, 60 CYC, SPINDLE MOTOR: 1 HP. 3450 RPM, FLOOR SPACE: 56” X 43” HEIGHT: 62-1/4” CERAMAX 5” X 10” MAGNETIC CHUCK, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
11" X 58" BRIDGEPORT VERTICAL MILL / SERIES II SPECIAL - 3-AXIS SOKKI DRO
11" X 58" BRIDGEPORT VERTICAL MILL MODEL: SERIES II SPECIAL* VERY GOOD CONITION EQUIPPED WITH: SOKKI 3-AXIS DIGITAL READOUT(X. Y, Z) KURT POWER DRAW BAR- BRIDGEPORT POWER FEED FOR LONGITUDINAL TABLE TRAVEL- SERVO POWER FEED ON CROSS TRAVEL- AIR COUNTERBALANCED KNEE TRAVEL FOR EASE OF OPERATION& POSITIONING- CHROME BOX WAYS- BIJUR ONE SHOT LUBE- 2 HP CONTINUOUS DUTY MOTOR- COOLANT TANK AND PUMP SPECIFICATIONS: TABLE SIZE: 11" X 58" MAXIMUM WEIGHT OF WORKPIECE: 1.500 LBS LONGITUDINAL TRAVEL(POWER) 33.5" LONGITUDINAL TRAVEL(MANUAL) 32.5" CROSS TRAVEL(POWER) 15" KNEE TRAVEL: 12" RAM TRAVEL: 17" QUILL TRAVEL: 5" INFINITELY VARIABLE SPINDLE SPEEDS: 60 TO 4.200 RPM POWER QUILL FEEDS(3) 0.003" 006" 0015" SPINDLE TAPER: R-8 THROAT. MINIMUM TO MAXIMUM: 6" TO 23" APPROX. ... moreWEIGHT: 3.655 LBS APPROX. FLOOR SPACE: 7' X 10' SHIPPING MEASURE: 72”X79”X93”H. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-1405ad16e73-0x107-
|
|
|
C & G SYSTEMS CNC PLASMA SHAPE CUTTING MACHINE
C& G SYSTEMS CNC PLASMA SHAPE CUTTING MACHINE NEW 1992 CUTTING TANK SIZE- 52" X 52" CAPACITY( 140 AMP) 2" THICKNESS APPROXIMATE MACHINE DIMENSIONS- 110"LR) X 78"FB) X 83"H) EQUIPPED WITH- BURNY 3 CNC CONTROL WITH TEACH MODE TERMAL DYNAMICS"STAK PAK II" POWER SUPPLY WITH 4 POWER MODULES GRECO MINIFILE BOX 3 CABLES& TORCHES MISCELLANEOUS TORCH TIPS. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
20" X 48" MONARCH ENGINE LATHE - 12" & 15" CHUCK
20" X 48" MONARCH ENGINE LATHE MODEL 18"CBB RATED SWING- 18" ACTUAL SWING OVER BED- 20-1/2" SWING OVER CROSS SLIDE- 10-1/2" DISTANCE BETWEEN CENTERS- 48" SPINDLE BORE- 1-5/8" SPINDLE NOSE- D16 CAMLOCK SPEEDS- 16) 13 TO 550 RPM THREADS- 48) 1-1/2 TO 92 TPI MAIN DRIVE MOTOR- 7.5 HP A.C. APPROXIMATE MACHINE WEIGHT- 7.500 LBS APPROXIMATE MACHINE DIMENSIONS- 136"LR) X 45"FB) X 56"H) EQUIPPED WITH- 12" 3 JAW CHUCK 15" 4 JAW CHUCK CHIP PAN 3 POINT STEADY REST THREADING DIAL MOTORIZED COOLANT PUMP. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
HARDINGE PRECISION TOOL ROOM HORIZONTAL MILL / POWER FEED - OVERARM BAR
HARDINGE PRECISION TOOL ROOM PLAIN HORIZONTAL MILL TABLE SIZE- 6" X 25" RANGE. LONGITUDINAL, BY HAND- 14" RANGE. LONGITUDINAL, BY POWER FEED- 11.5" RANGE. CROSS, BY HAND- 5.5" RANGE. VERTICAL, BY HAND- 13.25" MAX. TOP OF TABLE OF C/L OF SPINDLE- 12" TABLE HAS THREE TEE SLOTS- 7/16" SPINDLE SPEEDS- 8) 110 TO 1850 RPM COLLET CAPACITY- 5C COLLET MOTOR IN BASE- 3/4 HP APPROXIMATE MACHINE DIMENSIONS- 38"LR) X 47"FB) X 60"H) EQUIPPED WITH- POWER LONGITUDINAL FEED TO TABLE 32 FEEDS 1/8" TO 13" PER MINUTE OVERARM BAR AND ARBOR SUPPORT ARBOR DRAW BAR COOLANT* GREAT WORKING CONDITION HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
3/4" BROWN & SHARPE #2 CNC ULTRAMATIC AUTOMATIC MACHINE
3/4" BROWN& SHARPE#2 CNC ULTRAMATIC SINGLE SPINDLE AUTOMATIC MODEL 2048- NEW- 1983 ROUND BAR COLLET CAPACITY- 3/4" MAXIMUM LENGTH TURNED- 4" SPINDLE SPEED RANGE( 4 SPEED CHANGES) 4 TO 5018 RPM MAIN DRIVE MOTOR- 7-1/2 HP A.C. APPROXIMATE MACHINE DIMENSIONS- 60"LR) X 96"FB) X 84"H) EQUIPPED WITH- ALLEN BRADLEY SERIES 8200 CNC CONTROL FRONT. REAR AND 2 VERTICAL SLIDES 8 POSITION ENDWORKING TURRET COOLANT SYSTEM FRONT& REAR TOOL POSTS MISCELLANEOUS TURRET TOOLING LARGE ASSORTMENT OF CHANGE GEARS. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE
|
|
|
8" X 18" KENT AUTOMATIC HYDRAULIC SURFACE GRINDER
8" X 18" KENT INDUSTRIAL( USA) AUTOMATIC HYDRAULIC SURFACE GRINDER MODEL KGS-250AHD- NEW 1989- GREAT CONDITION TABLE WORKING SURFACE- 8" X 18" MAXIMUM TABLE TRAVEL- 19" X 10" TABLE TO SPINDLE CENTER. MAXIMUM- 19" LONGITUDINAL HYDRAULIC FEED RATES- 16 TO 75 FPM CROSS POWER FEED- 004" TO.3" PER STROKE RAPID CROSS FEED- 35 IPM AUTOMATIC DOWNFEED INCREMENT: VARIABLE 10 STEPS) 0001" TO.001" HAND FEED PER REVOLUTION/GRADUATION- 2"001" SPINDLE MOTOR- 1.5 HP 220/440/3/60 HYDRAULIC PUMP- 1 HP 220/440/3/60 GRINDING WHEEL( STANDARD WHEEL) 7" X 1/2" X 1.25" APPROXIMATE MACHINE WEIGHT- 2.840 LBS APPROXIMATE MACHINE DIMENSIONS- 59"LR) X 52"FB) X 66"H) EQUIPPED WITH: POWER INCREMENTAL DOWNFEED POWER LONGITUDINAL& CROSS FEEDS 8" X 18" FINE LINE ELECTROMAGNETIC ... moreCHUCK WITH CONTROLS COOLANT SYSTEM ONE SHOT LUBRICATION SPLASH GUARDS HYDRAULIC UNIT HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
1999 MILLTRONICS VM15 CNC VERTICAL MACHINING CENTER
MILLTRONICS VM15 CNC VERTICAL MACHINING CENTER SERIES A S/N 5626 NEW 1999 TABLE SIZE- 12" X 40" TABLE TRAVEL- X) 24" TABLE TRAVEL- Y) 13" HEAD TRAVEL- Z) 20" SPINDLE TAPER- 40 SPINDLE SPEED RANGE- 50 TO 8000 RPM AUTOMATIC TOOL CHANGER CAPACITY- 20 TOOLS TABLE LOAD CAPACITY- 1200 LBS. MAIN DRIVE MOTOR- A.C. APPROXIMATE MACHINE WEIGHT- 8.600 LBS APPROXIMATE MACHINE DIMENSIONS- 86"LR) X 76"FB) X 90"H) EQUIPPED WITH- CENTURION 6 CONVERSATIONAL CNC CONTROL 20 STATION AUTOMATIC TOOL CHANGER RS232 COMMUNICATIONS PORT AUTOMATIC LUBRICATION COOLANT SYSTEM FULL GUARDING HIMES MACHINERY PHONE- 888-803-2496 WEBSITE- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
AKEBONO MINC-26 CNC LATHE- FANUC OT - High Quality Japanese CNC Machine
AKEBONO MODEL MINC-26 GANG TOOL CNC LATHE/ FANUC OT CONTROL SPECIFICATIONS SIZE OF T-SLOTTED SLIDE: 16" X 7-1/2" TRAVEL(X) APPROX. 9" TRAVEL(Z) APPROX. 9" SPINDLE CAPACITY: 1-1/16" MAXIMUM SPINDLE SPEED: 6.000 RPM ELECTRICS: 220V. 3 PH, 60 CYCLE EQUIPPED WITH FANUC OT CONTROL& DRIVES 5C COLLET CHUCK MISC SLIDE TOOLING FLOOD COOLANT FULL GUARDING* THIS IS A VERY HIGH QUALITY JAPANESE MACHINE TOOL HIMES MACHINERY PHONE- 888-803-2496 WEBSITE- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
2003 HARDINGE CONQUEST TWIN TURN 65 CNC LATHE - Y-AXIS, LIVE TOOLING, FANUC 18iT
HARDINGE CONQUEST TWIN TURN 65 CNC LATHE. Y-AXIS, TWIN LIVE TURRETS, TWIN SPINDLE, FANUC 18iT EQUIPPED WITH GE FANUC 18iT CNC CONTROL, LNS SUPER HYDRO BARFEED, B65 COLLET CHUCK, TWIN TURRET. TWIN SPINDLE, THROUGH SPINDLE COOLANT ON SECOND SPINDLE, PART PRESENT DETECTOR ON SECOND SPINDLE, Y-AXIS ON UPPER TURRET, LIVE TOOLING BOTH TURRET WITH“C” AXIS, CHIP CONVEYOR, PARTS CATCHER– CONVEYOR TYPE WITH GRIPPER, MISCELLANEOUS LIVE TURRET TOOL HOLDERS, MISCELLANEOUS STATIC TURRET TOOL HOLDERS, MISCELLANEOUS COLLETS, SPINDLE CONFIGURATION(2X) ANSI A2-6″ SPINDLE THROUGH HOLE: 3.25″ HORSEPOWER– MAIN(30 MINIMUM) 25 HP, TORQUE RATING: 179 FT-LB, BASE SPEED: 575 RPM, HORSEPOWER– SECONDARY(30 MINIMUM) 15 HP, TORQUE RATING: 158 FT-LB, BASE SPEED: 500 RPM, SPEED RANGE(1 RPM STEPS) 40 TO 4000 RPM, DRAW TUBE TYPE: HYDRAULIC, DRAW BAR FORCE(MAXIMUM) 1.440 TO ... more10,500 LBS, B65 COLLET(THROUGH CAPACITY) 2.56″ S22 MASTER COLLET(THROUGH CAPACITY) 2.25″ TURNING LENGTH WITH COLLET(MAXIMUM) 17.72″ HANG WEIGHT WITH DEVICE AND PART: 300 LBS, SWING DIAMETER OVER WAY COVERS(MAXIMUM) 19.45″ PRELOADED BALL SCREW DIAMETER, X& Z-AXIS: 1.42″ Y-AXIS: 98″ SECONDARY SPINDLE: 1.42″ TRAVEL(MAXIMUM) X-AXIS: 5.51″ Y-AXIS: ± 1.377″ Z-AXIS: 17.71″ SECONDARY SPINDLE: 20.47″ TRAVERSE RATE(MAXIMUM) X-AXIS: 590 IPM, Y-AXIS: 236 IPM, Z-AXIS AND SECONDARY SPINDLE: 1.181 IPM, THRUST(MAXIMUM– 1 MINUTE INTERMITENT, RATINGS SHOWN) X-AXIS: 2.286 LBS, Y-AXIS: 1.175 LBS, Z-AXIS AND SECONDARY SPINDLE: 2.250 LBS, NUMBER OF STATIONS: 10, TOOL CONFIGURATION: VDI 30MM, SQUARE SHANK TOOL SIZE(MAXIMUM) 3/4″ ROUND SHANK TOOL SIZE(MAXIMUM) 1-1/4″ LIVE TOOLING CAPABILITY: ALL STATIONS, TOOL SHANK DIAMETER W/ER25 COLLETS: 04– 625″ 15 MINUTE INTERMITTENT RATINGS SHOWN) 5 HP, TORQUE RATING(15 MINUTE INTERMITTENT, RATINGS SHOWN) 17.5 FT-LB, SPEED RANGE(1 RPM STEPS) 80 TO 8000 RPM, BASE SPEED: 1.500 RPM, INDEXING TIME(STATION-TO-STATION) 6 SECOND, SPEED(MAXIMUM) 80 RPM, TORQUE@ 100% DUTY CYCLE, MAIN SPINDLE: 74 FT-LB, SE
|
|
|
HARDINGE 6 POSITION BED TURRET FOR DSM-59 LATHE - 5/8″ HOLE DIAMETER
HARDINGE 6 POSITION BED TURRET FOR DSM-59 LATHE SPECIFICATIONS 6 POSITION, 5/8″ HOLE DIAMETER, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
8' x 1/2" CHICAGO DRIES & KRUMP POWER APRON BRAKE -
8' x 1/2" CHICAGO DRIES& KRUMP POWER APRON BRAKE New 1948- Model# 188 Length of Bed& Upper Jaw: 97" Replaceable Upper Jaw& Lower Flange Adjustable Degree of Bend Dial Air Clamping of Upper Jaw Dual Gear Drive to Apron Manual Front& Back Adjustment of Upper Jaw 20 HP Motor. 3/60/220-440 with Built in Stearns Brake DIMS Overall Dimensions: 148" L x 75" W x 91" H Air Receiver Tank: 14" Dia. x 56" H Weight: Approx. 20.000 Lbs. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
¼" X 10' BERTSCH INITIAL PINCH PLATE BENDING ROLL
¼" X 10' BERTSCH INITIAL PINCH PLATE BENDING ROLLS Serial No. 9028- New 1958. Rated Capacity: ¼" x 10' Mild Steel. Rear Adjusting Roll Size: 9 7/8" Diameter x 122" Long Top Roll Size: 9 5/8" Diameter x 125" Long. Bottom Roll Size: 10 3/8" Diameter x 122" Long. Rear Roll Adjustment: 11" Powered Adjustment. EQUIPPED WITH: Air Drop End. Grease Zerk Fitting Lubrication. Variable Speed Trolley Car Style Speed Controls for Forward and Reverse Operation. Gearing. Motor and Electrical Guards. Machine is Mounted on a 10" I-beam To Make It Flush Floor Operation. Without I beam a clearance pit will be required for the air drop end. 15 HP Vari Speed CIP Motor. Wired For 3 Phase 50/60 Hz 208-220-440 Volts. Overall Size: Machine 230" Long x 80" Wide x 80" High. Electrical ... morePanel: 48" LR x 30" FB x 76" High. Panel Guard Cage: 54" LR x 36" FB x 78" High. Total Machine Weight 24.000 Lbs. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
1998 CINCINNATI ARROW 500 CNC VERTICAL MACHINING CENTER - THRU SPINDLE COOLANT
CINCINNATI ARROW 500 VERTICAL MACHINING CENTER YEAR: 1998- MODEL: Arrow 500 Table Size: 27-1/2" x 20-1/2" Travels: 20" X. Y& Z. Maximum Distance Spindle to Table: 25" Table Load Capacity: 770 Lbs. Spindle Speeds: 60 to 6000 RPM. Spindle Taper: 40 Ansi. Feed Rates: 475 IPM X. Y& Z. Rapid Traverse Rates: 787 IPM. 21-Position Tool Changer(Random Selection) Maximum Tool Weight: 15 Lbs. Maximum Tool Length: 12" Maximum Tool Diameter. Adjacent Pockets Full: 3.1" Maximum Tool Diameter. Adjacent Pockets Empty: 6.2" EQUIPPED WITH Acramatic 2100E CNC Control Touch Screen System RS232 Port. Disc Drive Hand Held Pulse Generator. Rigid Tap. New Hard Drive Installed Jan. 2013. Auto Lube System. THRU SPINDLE COOLANT Halogen Work Light. Full Set of Machine Manuals. 2-Speed Spindle Motor. 7-1/2/ 10 HP Continuous, ... more3/60. Coolant Pump Motor. 5 HP, 3/60/230-460. DIMENSIONS Machine Overall Dimensions: 98" L-R x 79" F-B x 94" H. Machine Weight: 9.000 Lbs. Coolant Pump& Chip Pan: 78" L x 23" W x 31" H. Chip Pan: 60" L x 22" W x 15" H. Transformer: 22" x 20" x 22" H. HIMES MACHINERY PHONE(888) 803-2496 WEBSITE- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1405ad16f7e-0x106-
|
|
|
MITEK 30 AMP PLUNGE TYPE EDM MACHINE
MITEK PLUNGE TYPE EDM MACHINE. 30 AMP MODEL MK-45- NEW- 1991 SPECIFICATIONS SIZE OF WORKING TABLE: 24″ X 12″ SIZE OF WORKING TANK: 35″ X 21″ X 13″ X-AXIS TRAVEL: 12″ Y-AXIS TRAVEL: 10″ RAM TRAVEL: 6″ WORKHEAD TRAVEL: 8″ DISTANCE– ELECTRODE TO WORKING TABLE: 18″ HAND FEED(X. Y AXIS) PER GRADUATION: 0.001″ PER REVOLUTION: 0.2″ MAXIMUM WORKPIECE WEIGHT: 660 LBS, MAXIMUM ELECTRODE WEIGHT: 155 LBS, RESERVOIR CAPACITY: 80 GALLONS, MACHINE WEIGHT: 2.000 LBS, ELECTRICS: 220 VOLTS. 3 PH, 60 CYC, MODEL 30 POWER SUPPLY. S/N 8008008, BALL SCREWS ON X. Y AXIS, FLUSHING NOZZLE, HIMES MACHINERY PHONE 888-803-2496
|
|
|
1995 BRIDGEPORT EZ TRAK DX 2-AXIS CNC MILL
BRIDGEPORT EZ TRAK DX 2-AXIS CNC/ MANUAL MILL- 9″ X 48″ NEW: 1995- MODEL: EZ TRAK DX- Great Condition! SPECIFICATIONS WORKING SURFACE: 9″ X 48″ TABLE TRAVEL(X-AXIS) 36″ SADDLE TRAVEL(Y-AXIS) 12″ KNEE TRAVEL(Z-AXIS) 16″ QUILL TRAVEL: 5″ RAM TRAVEL: 12″ MINIMUM THROAT DISTANCE: 6.75″ MAXIMUM THROAT DISTANCE: 18.75″ TABLE TO SPINDLE NOSE GAGE LINE: 2.5″ MAXIMUM WEIGHT OF WORKPIECE: 750 LBS, T-SLOTS: 3 ON 2.5″ CENTERS, T-SLOT SIZE: 625″ MAXIMUM HEIGHT ABOVE FLOOR: 47.25″ SPINDLE TAPER: R-8, SPINDLE SPEED. HIGH(INFINITELY VARIABLE) 500– 4200 RPM, LOW: 60– 500 RPM, FLOOR AREA: 80″ X 64″ HEIGHT: 82″ NET WEIGHT. APPROX. 1,950 LBS, SHIPPING WEIGHT. APPROX. 2,180 LBS, ELECTRICS: 220 VOLTS. 3 PH, 60 CYC, EQUIPPED WITH 2-AXIS EZ TRAK DX CONTROL(3-AXIS DIGITAL READOUT) AUTO LUBE, CHROME WAYS, POWER DRAW BAR, MIST SYSTEM, WORKLIGHT, HIMES MACHINERY PHONE- ... more888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
40" X 48" MONARCH ENGINE LATHE - 2 AXIS DRO - TAPER ATTACH - 30" 4 JAW CHUCK
40" X 48" CC MONARCH ENGINE LATHE MODEL 20CM MACHINE RAISED DESIGN SWING OVER BED- 40" SWING OVER CROSS SLIDE. APPROX. 30" DISTANCE BETWEEN CENTERS- 48" SPEEDS- 16) 10 TO 450 RPM THREADING RANGE- 48) 3/4 TO 46 TPI SPINDLE BORE- 2-3/8" SPINDLE NOSE- D1-8" CAMLOCK HARDENED AND GROUND BED MAIN DRIVE MOTOR- 20 HP 220/440/3/60 APPROXIMATE MACHINE WEIGHT- 11.300 LBS APPROXIMATE MACHINE DIMENSIONS- 140"LR) X 67"FB) X 66"H) EQUIPPED WITH- 30" 4 JAW CHUCK 24" 4 JAW CHUCK 3 POINT STEADY REST THREADING DIAL NEWALL 2 AXIS DIGITAL READOUT QUICK CHANGE TOOL POST WITH MISCELLANEOUS HOLDERS TAPER ATTACHMENT. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
1994 MITSUBISHI CNC HORIZONTAL MACHINING CENTER w/ 7 PALLET POOL
MITSUBISHI CNC HORIZONTAL MACHINING CENTER WITH 7 PALLET POOL NEW 1994 CLICK HERE TO VIEW VIDEO* FEATURING CAT 50 TAPER. 10,000 RPM, COOLANT THRU SPINDLE, 7 PALLET POOL. RIGID TAPPING, 80 ATC TRAVEL. PALLET CROSS- X) 28" TRAVEL. SPINDLE HEAD VERTICAL- Y) 24.8" TRAVEL. COLUMN, LONGITUDINAL- Z) 23.6" PALLET SIZE- 7) 19.7" X 19.7" PALLET INDEXING- 1 DEGREE SPINDLE TAPER- CAT#50 SPINDLE SPEED RANGE- 60 TO 10.000 RPM RAPID TRAVERSE RATE- 1181 IPM TOOL STORAGE CAPACITY- 80 TOOL CHANGE TIME(TOOL TO TOOL) APPROX. 1.5 SEC. MAIN DRIVE MOTOR- 15 HP A.C. EQUIPPED WITH- M3 MITSUBISHI/MELDAS CNC CONTROL CHIP AUGER 80 POSITION TOOL CHANGER COOLANT SYSTEM 7 PALLET AUTOMATIC PALLET POOL SYSTEM OIL CHILLER COOLANT THRU SPINDLE CHIP CONVEYOR FULL GUARDING ALL AVAILABLE MANUALS RIGID TAPPING HIMES MACHINERY PHONE- 515-509-7772 EMAIL- ... moreWEBSITE- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
CINCINNATI MILACRON 2LO CENTERLESS GRINDER - HYDRAULIC TRUING
CINCINNATI MILACRON 2LO CENTERLESS GRINDER REBUILT IN 1979 WORK CAPACITY- 3.5" GRINDING WHEEL DIAMETER- 20" REGULATING WHEEL DIAMETER- 12" REGULATING WHEEL SPEED. INFINITELY VARIABLE UP TO 300 RPM GRINDING WHEEL SPEED- 1200 RPM MAIN DRIVE MOTOR- 15 HP 230/3/60 APPROXIMATE MACHINE WEIGHT- 9.000 LBS APPROXIMATE MACHINE DIMENSIONS- 97"LR) X 63"FB) X 78"H) EQUIPPED WITH- HYDRAULIC TRUING ON GRINDING WHEEL HYDRAULIC TRUING ON REGULATING WHEEL A.C. DRIVE FOR REGULATING WHEEL COOLANT WHEEL MOUNT. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
1997 DOALL 12 x 12 AUTOMATIC HORIZONTAL BANDSAW - MODEL C305A
DO-ALL MODEL C305A AUTOMATIC HORIZONTAL POWER BANDSAW. 12" X 12" NEW 1997 SPECIFICATIONS CAPACITY. RECTANGULAR: 12” X 12” CAPACITY. ROUND: 12" RECOMMENDED SMALLEST DIAMETER: ½” SINGLE AUTOMATIC INDEX LENGTH: 16” MINIMUM BUTT END W/ AUTO FEED: 5” MINIMUM AUTO INDEX LENGTH: ¼” INFINITELY VARIABLE BAND SPEED DRIVE: 60-350 FPM MATERIAL PASS LINE HEIGHT: 30.5” BLADE: 1-1/4” X 144” WHEEL DIAMETER: 15” DRIVE MOTOR: 5 HP HYDRAULIC SYSTEM: 2 HP COOLANT PUMP: 1/10 HP FLOOR SPACE: 8’ X 6’6” X 5’ NET WEIGHT: 4.200 LBS ELECTRICS: 440 VOLTS. 3 PH, 60 CYC EQUIPPED WITH PLC CONTROL OVERHEAD BUNDLING AUTO HEIGHT SENSOR CHIP AUGER COOLANT SYSTEM BLADE BRUSH HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
2 VINTAGE STARRETT LITTLE GIANT SCREW JACKS - #190
These are complete and in very nice condition. Your satisfaction is guaranteed. Please email me with any questions.
|
|
|
Erickson Tool Co. Speed Indexer Model 544-600
I have a Erickson Tool Co. Speed Indexer Model 544-600 for sale. I bought it thinking it would work with my machine but it will not so it has to go. I was told it was working when I purchased it but I have no way of testing it to make sure. It is a very nice looking piece and has no rust on it. Feel free to contact me if you have any additional questions and I will try to answer them. Buyer to pay actual shipping charges. No international bidders please. Thanks for looking.
|
|
|
1938 Starret precision tools catalog
I DO COMBINE SHIPPING! Just ask if ebay doesn't do it automatically. PLEASE WAIT FOR ME TO INVOICE YOU IF YOU HAVE PURCHASED A LARGE. HEAVY, OR UNUSUALLY SHAPED ITEM, OR MULTIPLE ITEMS! Shipping: I strive to ship EVERYTHING'Priority mail/flat rate' The post office gives me free boxes. which cuts down on other costs) and free delivery confirmation, which protects both of us. Very small stuff that I can ship 1st class I will do so, as long as you don't mind. If you want delivery confirmation or other services, please ask. NOTE that US rates have gone up. I will try and get you the best shipping rate(such as media mail for books etc) that I can. And work with you if you ask. PLEASE ASK IF YOU HAVE QUESTIONS OR CONCERNS BEFORE BUYING! Please read the description of the item. If you have questions. Ask. If you need more photos, ... moreask. Please don't'assume' that something will fit, or is a certain size, unless I've stated it is. Vintage clothing is almost always smaller and skinnier due to the folks that wore it'back in the day' than today. If something is damaged, I'll tell you. It's very rare that I see anything'mint/unused/never touched' so assume what is being sold is used. If something has a funky smell to it, I'll tell you LOL. I sell stuff that I get from auctions, flea markets, and yard sales in my area, so my'inventory' changes all the time. I typically only look for military stuff since that is something I'm familiar with. But my inventory does contain the odd and unusual. I do NOT end auctions early. Why? Because it's not fair to everyone else who is. Or might be, bidding on the item. That is why this is an'auction' Not trying to be rude, folks. Really, I'm not. But I don't like it when something like that happens to me, and I'm sure not going to do it to someone else. So, please don't ask. OVERSEAS BUYERS TAKE NOTE: US POSTAL RATES HAVE YET AGAIN INCREASED! I have NO control over that. Please don't ask'C
|
|
|
Brown & Sharpe 7030-5 .0005 dial test tool Swiss Made w/ plastic case
Indicator works flawlessly. There is a small grind mark where a number was removed. See pic. No other markings. Plastic case in great condition.
|
|
|
NICE New Age Metal Electric Etching Pen Model 200 with Extra Tips & Instructions
NEWAGE ETCHING PEN. This is an Awsome NewAge Etching Pen model 200. I have its Original Styrofoam Inner Box part. And it is in Excellent Clean Operating Condition. Comes with 110v Power Unit, Hand Wand, Instructions Sheets, and 2 small bags of 18 Extra Etching Tips. Great for Business Use, Crafts Projects and lots of other Uses. I am selling alot of other Very Cool Children's Items. Books, Antiques, Collectibles, Sporting Goods and Video Games, so Please Check Out My Other Auctions. If you'd like more scans or photos, or have any questions, just email me, and i'll do my best! Just a Super Addition to any Tool Collection, Add it to your Collection Today! I Prefer an online PAYPAL payment. But i'm VERY FLEXIBLE. Due to the increasing number of new Non-Paying ebayers, Please EMAIL me ASAP after the auction ends, and Payment is ... moreto be RECIEVED within 4 days after the auction ends or the item WILL BE RELISTED. I ship VERY QUICKLY, usually the Next Day. YES, I DO SHIP INTERNATIONALLY, TO MOST ANY COUNTRY. PLEASE EMAIL FOR SHIPPING COST TO YOUR COUNTRY BEFORE YOU PAY FOR THE ITEM. A word Please about Ebay Feedback. I value my Feedback Reputation Very Much. And I want this"Ebay Experience" to be fun for EVERYONE. I will do what ever I can, within reason, to ensure your COMPLETE SATISFACTION. I strive for 5-star service by stating my policies upfront, answering questions quickly, sending packages daily, and NOT overcharging on shipping! In eBay's new feedback system, when you give 4 stars it may seem like a great score. For instance, a 4 in Shipping Time means"Quickly" eBay, however, considers this a sub-par mark. Their standards require sellers to maintain 4.8& above, or be penalized with higher fees and lower standing in search results. If you are satisfied with the transaction upon receipt of your item, ple
|
|
|
FADAL 4020 Y-AXIS BALLSCREW
THIS BALLSCREW IS COMPLEATE WITH BEARING BRACKET. SCREW AND BEARINGS ARE IN GREAT SHAPE. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-1405ae0f24e-0x101-
|
|
|
Andrew Sykes ASF21 Cooling Fan - UP TO 10 AVAILABLE
Andrew Sykes ASF21 Cooling Fan The ASF21 Cooling Fan will create a comfortable and pleasant working environment by circulating clean fresh air. Thereby assisting comfort cooling. The ASF21 helps to disperse the dangerous build up of fumes. Dust, carbon monoxide, water vapour and other noxious materials. Andrew Sykes Direct Price: £315.60 Our Price: 99p START 10 Available Any Questions? Please contact! Best Offers Accepted.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1405ae0f275-0x104-
|
|
|
LOT OF PARTS FOUND IN A MACHINISTS TOOL BOX
A s you can see in the photos these show age. The tools listed here are from my late husbands collection. If an item is not as described. Please contact me.
|
|
|
Huge Machinist,Toolmaker,Lathe Mill Lot,8.6lbs(613)
Huge Machinist.Toolmaker,Lathe Mill Lot,8.6lbs(613) Everything else in the tool box.NO RESERVE WHAT YOU SEE IN WHAT YOU GET! I know very little about these items or item and have described them to the best of my ability.Please look at the pictures for details, they are the exact items you will receive. NOTE* Most of these tools have a name or initials engraved or punched into them but not in a place that would hinder their use. All these machinist/lathe/toolmaker tools came from an estate sale.I am told the man that owned them was an expert machinist and tool maker and worked doing that at the U.S. Air Force base that used to be in Myrtle Beach.SC.I truly believe all these tools are of high quality. Please ask any Questions you may have before bidding or buying. I do combine shipping whenever possible. Thank you for your interest and please ... morelook at my other items. The number in( is just my inventory number?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-1405ae0f0ed-0x103-
|
|
|
TG = ANTIGUAS TIJERAS PELACABLES CON TOPE REGULABLE Miden 10 cm. de largas
T IENDA G ODOY = LOS PAGOS SE PREFIEREN A TRAVES DEL BANCO BBVA LOS ENVIOS SIEMPRE POR CORREO CERTIFICADO SI COMPRA VARIOS ARTICULOS SOLO PAGA UNA VEZ LOS GASTOS DE ENVIO. EL RESTO 50 CENTIMOS(por las comisiones y eso) = = = = = = = = = = = = VER SIMILARES ANTIGUAS TIJERAS PELACABLES CON TOPE REGULABLE Miden 10 cm. de largas LA DE LAS IMAGENES HTML clipboard
|
|
|
SQUARE D 400 AMP 600 VOLT BREAKER DISTRIBUTION BOX I LINE BOX WITH 3 BREAKERS
SQUARE D 3 PHASE 600 VOLT 400 AMP I LINE BOX AND 3 BREAKERS 600 VOLT BREAKER DISTRIBUTION BOX WITH 3 BREAKERS MAIN BREAKERS ALSO AVAILABLE A PLUS MACHINERY IS LIQUIDATING OVER 1 MILLION DOLLARS IN MACHINE TOOLS. AND MACHINE TOOL PARTS ALONG WITH TOOLING FOR MOST MANUFACTURING EQIPMENT. PLEASE VISIT OUR EBAY LISTINGS FOR THE PARTS YOU NEED AT THE PRICE YOU WANT TO PAY. YOU CAN ALWAYS REACH US AT MANITO MACHINERY BY CALLING 217-615-8718 OR SEND US AN EMAIL AT SALES@APLUSMACHINERY.COM AND FILL OUT THE EMAIL REQUEST FOR MORE INFORMATION. ALWAYS OPEN YOU WILL ALWAYS BE ABLE TO CONTACT US THROUGH OUR EBAY ACCOUNT. OUR LISTINGS WILL FEATURE THE FOLLOWING MACHINES AND TOOLING MOST OF THE UNITS. WILL ONLY BE LISTED ONCE SO BID EARLY IF YOU WANT THE ITEM. TOOL HOLDERS 40 AND 50 TAPER INSERT MILLING AND FACE MILLS DRILLS AND TAPS BORING BARS OF ALL ... moreSIZES TURRET LATHE TOOLING HYDRAULIC CHUCKS MANUAL CHUCKS ROTARY TABLES AND INDEXERS. MANY MORE ITEMS WILL BE LISTED FOR YOUR INSPECTION AS WITH ALL OF THE ITEMS WE SELL. THE ITEM HAS BEEN TESTED. WAS RUNNING GOOD WHEN REMOVED FROM SERVICE, IS NEW OR IN GOOD CONDITION. WITH OVER 800 LOTS FOR SALE. WE HAVE SOMETHING FOR EVERYONE. IF YOU DON’T SEE WHAT YOU WANT LISTED. SEND US AN EMAIL AND ASK FOR IT. WE PROBABLY HAVE IT AVAILABLE AND WILL LIST AN AUCTION FOR IT. ALL SALES ARE FINAL AND ALL ITEMS ARE SOLD AS IS WHERE IS UNLESS POSTED ON SALE PAGE. LOADING AND STORAGE FEES ARE AS ADVERTISED AND ARE BASED ON TIME REQUIRED AND EQUIPMENT REQUIRED TO COMPLETE THE JOB. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1405ae0f2c3-0x102-
|
|
|
ALLEN BRADLEY RELAY NO RESERVE
THIS AUCTION IS FOR 1 RELAY ALLEN BRADLEY TYPE N ELECTRIC RELAYS 3 PHASE MOTOR RELAY AND CONTROL RELAY READY TO INSTALL AND RUN TODAY SEVERAL AVAILABLE(OVER 100) A PLUS MACHINERY IS LIQUIDATING OVER 1 MILLION DOLLARS IN MACHINE TOOLS. AND MACHINE TOOL PARTS ALONG WITH TOOLING FOR MOST MANUFACTURING EQIPMENT. PLEASE VISIT OUR EBAY LISTINGS FOR THE PARTS YOU NEED AT THE PRICE YOU WANT TO PAY. YOU CAN ALWAYS REACH US AT A PLUS MACHINERY BY CALLING 217-615-7339 OR SEND US AN EMAIL AT SALES@APLUSMACHINERY.COM AND FILL OUT THE EMAIL REQUEST FOR MORE INFORMATION. ALWAYS OPEN YOU WILL ALWAYS BE ABLE TO CONTACT US THROUGH OUR EBAY ACCOUNT. OUR LISTINGS WILL FEATURE THE FOLLOWING MACHINES AND TOOLING MOST OF THE UNITS. WILL ONLY BE LISTED ONCE SO BID EARLY IF YOU WANT THE ITEM. TOOL HOLDERS 40 AND 50 TAPER INSERT MILLING AND FACE MILLS DRILLS AND TAPS ... moreBORING BARS OF ALL SIZES TURRET LATHE TOOLING HYDRAULIC CHUCKS MANUAL CHUCKS ROTARY TABLES AND INDEXERS. MANY MORE ITEMS WILL BE LISTED FOR YOUR INSPECTION AS WITH ALL OF THE ITEMS WE SELL. THE ITEM HAS BEEN TESTED. WAS RUNNING GOOD WHEN REMOVED FROM SERVICE, IS NEW OR IN GOOD CONDITION. WITH OVER 800 LOTS FOR SALE. WE HAVE SOMETHING FOR EVERYONE. IF YOU DON’T SEE WHAT YOU WANT LISTED. SEND US AN EMAIL AND ASK FOR IT. WE PROBABLY HAVE IT AVAILABLE AND WILL LIST AN AUCTION FOR IT. ALL SALES ARE FINAL AND ALL ITEMS ARE SOLD AS IS WHERE IS UNLESS POSTED ON SALE PAGE. LOADING AND STORAGE FEES ARE AS ADVERTISED AND ARE BASED ON TIME REQUIRED AND EQUIPMENT REQUIRED TO COMPLETE THE JOB. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
PLASTIC STORAGE BASKETS 48 X 48 X 30
PLASTIC STORAGE BASKETS 4FT X 4FT X APROX 30 INCHES DEEP. STACKABLE. FORLIFT MOVEABLE, LIGHT WEIGHT EASY TO MOVE EMPTY. A PLUS MACHINERY IS LIQUIDATING OVER 1 MILLION DOLLARS IN MACHINE TOOLS. AND MACHINE TOOL PARTS ALONG WITH TOOLING FOR MOST MANUFACTURING EQIPMENT. PLEASE VISIT OUR EBAY LISTINGS FOR THE PARTS YOU NEED AT THE PRICE YOU WANT TO PAY. YOU CAN ALWAYS REACH US AT A PLUS MACHINERY BY CALLING 217-615-7339 OR SEND US AN EMAIL AT SALES@APLUSMACHINERY.COM AND FILL OUT THE EMAIL REQUEST FOR MORE INFORMATION. ALWAYS OPEN YOU WILL ALWAYS BE ABLE TO CONTACT US THROUGH OUR EBAY ACCOUNT. OUR LISTINGS WILL FEATURE THE FOLLOWING MACHINES AND TOOLING MOST OF THE UNITS. WILL ONLY BE LISTED ONCE SO BID EARLY IF YOU WANT THE ITEM. TOOL HOLDERS 40 AND 50 TAPER INSERT MILLING AND FACE MILLS DRILLS AND TAPS BORING BARS OF ALL SIZES TURRET LATHE ... moreTOOLING HYDRAULIC CHUCKS MANUAL CHUCKS ROTARY TABLES AND INDEXERS. MANY MORE ITEMS WILL BE LISTED FOR YOUR INSPECTION AS WITH ALL OF THE ITEMS WE SELL. THE ITEM HAS BEEN TESTED. WAS RUNNING GOOD WHEN REMOVED FROM SERVICE, IS NEW OR IN GOOD CONDITION. WITH OVER 800 LOTS FOR SALE. WE HAVE SOMETHING FOR EVERYONE. IF YOU DON’T SEE WHAT YOU WANT LISTED. SEND US AN EMAIL AND ASK FOR IT. WE PROBABLY HAVE IT AVAILABLE AND WILL LIST AN AUCTION FOR IT. ALL SALES ARE FINAL AND ALL ITEMS ARE SOLD AS IS WHERE IS UNLESS POSTED ON SALE PAGE. LOADING AND STORAGE FEES ARE AS ADVERTISED AND ARE BASED ON TIME REQUIRED AND EQUIPMENT REQUIRED TO COMPLETE THE JOB. SHOP RATE IS $85.00 PER HOUR. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
WARNER SWAYSEY ADJUSTABLE BORING HEADS
WARNER SWAYSEY ADJUSTABLE BORING HEAD DOUBLE BAR HOLDER. INCREMENT DIAL FLANGE MOUNT 4 BOLT. A PLUS MACHINERY IS LIQUIDATING OVER 1 MILLION DOLLARS IN MACHINE TOOLS. AND MACHINE TOOL PARTS ALONG WITH TOOLING FOR MOST MANUFACTURING EQIPMENT. PLEASE VISIT OUR EBAY LISTINGS FOR THE PARTS YOU NEED AT THE PRICE YOU WANT TO PAY. YOU CAN ALWAYS REACH US AT A PLUS MACHINERY BY CALLING 217-615-7339 OR SEND US AN EMAIL AT SALES@APLUSMACHINERY.COM AND FILL OUT THE EMAIL REQUEST FOR MORE INFORMATION. ALWAYS OPEN YOU WILL ALWAYS BE ABLE TO CONTACT US THROUGH OUR EBAY ACCOUNT. OUR LISTINGS WILL FEATURE THE FOLLOWING MACHINES AND TOOLING MOST OF THE UNITS. WILL ONLY BE LISTED ONCE SO BID EARLY IF YOU WANT THE ITEM. TOOL HOLDERS 40 AND 50 TAPER INSERT MILLING AND FACE MILLS DRILLS AND TAPS BORING BARS OF ALL SIZES TURRET LATHE TOOLING HYDRAULIC CHUCKS MANUAL ... moreCHUCKS ROTARY TABLES AND INDEXERS. MANY MORE ITEMS WILL BE LISTED FOR YOUR INSPECTION AS WITH ALL OF THE ITEMS WE SELL. THE ITEM HAS BEEN TESTED. WAS RUNNING GOOD WHEN REMOVED FROM SERVICE, IS NEW OR IN GOOD CONDITION. WITH OVER 800 LOTS FOR SALE. WE HAVE SOMETHING FOR EVERYONE. IF YOU DON’T SEE WHAT YOU WANT LISTED. SEND US AN EMAIL AND ASK FOR IT. WE PROBABLY HAVE IT AVAILABLE AND WILL LIST AN AUCTION FOR IT. ALL SALES ARE FINAL AND ALL ITEMS ARE SOLD AS IS WHERE IS UNLESS POSTED ON SALE PAGE. LOADING AND STORAGE FEES ARE AS ADVERTISED AND ARE BASED ON TIME REQUIRED AND EQUIPMENT REQUIRED TO COMPLETE THE JOB. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SQUARE D 800 AMP 600 VOLT BREAKER DISTRIBUTION BOX I LINE BREAKERS
SQUARE D 3 PHASE 600 VOLT 800 AMP I LINE BREAKER BOX BREAKER DISTRIBUTION BOX WITH BREAKERS 100 AND 150 AMP INCLUDED IN PRICE 600 AMP AVAILABLE FOR EXTRA 1200.00(NEW PRICE IS 6300.00) 400 AMP AVAILABLE FOR 650.00. NEW PRICE 4100.00) MAIN 800 AMP BREAKERS ALSO AVAILABLE A PLUS MACHINERY IS LIQUIDATING OVER 1 MILLION DOLLARS IN MACHINE TOOLS. AND MACHINE TOOL PARTS ALONG WITH TOOLING FOR MOST MANUFACTURING EQIPMENT. PLEASE VISIT OUR EBAY LISTINGS FOR THE PARTS YOU NEED AT THE PRICE YOU WANT TO PAY. YOU CAN ALWAYS REACH US AT A PLUS MACHINERY BY CALLING 217-615-7339 OR SEND US AN EMAIL AT SALES@APLUSMACHINERY.COM AND FILL OUT THE EMAIL REQUEST FOR MORE INFORMATION. ALWAYS OPEN YOU WILL ALWAYS BE ABLE TO CONTACT US THROUGH OUR EBAY ACCOUNT. OUR LISTINGS WILL FEATURE THE FOLLOWING MACHINES AND TOOLING MOST OF THE UNITS. WILL ONLY BE LISTED ONCE ... moreSO BID EARLY IF YOU WANT THE ITEM. TOOL HOLDERS 40 AND 50 TAPER INSERT MILLING AND FACE MILLS DRILLS AND TAPS BORING BARS OF ALL SIZES TURRET LATHE TOOLING HYDRAULIC CHUCKS MANUAL CHUCKS ROTARY TABLES AND INDEXERS. MANY MORE ITEMS WILL BE LISTED FOR YOUR INSPECTION AS WITH ALL OF THE ITEMS WE SELL. THE ITEM HAS BEEN TESTED. WAS RUNNING GOOD WHEN REMOVED FROM SERVICE, IS NEW OR IN GOOD CONDITION. WITH OVER 800 LOTS FOR SALE. WE HAVE SOMETHING FOR EVERYONE. IF YOU DON’T SEE WHAT YOU WANT LISTED. SEND US AN EMAIL AND ASK FOR IT. WE PROBABLY HAVE IT AVAILABLE AND WILL LIST AN AUCTION FOR IT. ALL SALES ARE FINAL AND ALL ITEMS ARE SOLD AS IS WHERE IS UNLESS POSTED ON SALE PAGE. LOADING AND STORAGE FEES ARE AS ADVERTISED AND ARE BASED ON TIME REQUIRED AND EQUIPMENT REQUIRED TO COMPLETE THE JOB. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Star SV-20 Swiss Lathe ER-11 Two Spindle Modular Driven Toolholder 421-52-00
This listing is for an ER-11 Two Spindle Modular Driven Toolholder, ER-11 Part# 421-52-00, Fits Star SV-20 CNC Swii Type Automatic Lathes. Made in Germany. Used but in great condition.
|
|
|
DIAMOND PLATE FLAT / SHEET STOCK - 9" x 18-1/2"
aims DIAMOND PLATE FLAT/ SHEET STOCK- 9" x 18-1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is Diamond Plate Flat/ Sheet Stock in EXCELLENT condition. Specifications Holes: 7mm(280" One on each corner. Overall Dimensions: 9" x 18-1/2" x.100" thick. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DIAMOND PLATE FLAT/ SHEET STOCK- 9" x 18-1/2" Reliable Tool Inc. c 2011 | Powered by
|
|
|
HEAVY DUTY 60" x 17-1/2" WORK BENCH
aims HEAVY DUTY 60" x 17-1/2" WORK BENCH read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a used Heavy Duty Work Bench in good condition. Specifications: Table Surface Area: 60" x 17-1/2" Table Surface Height From Floor: 32" Overall Dimensions: 60" x 17-1/2" x 32" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HEAVY DUTY 60" x 17-1/2" WORK BENCH HEAVY DUTY 60" x 17-1/2" WORK BENCH Reliable Tool Inc. c 2011 | Powered by
|
|
|
Interchangeable Steel Type W/ Holder, Size 10 (1/2"), Pryor England
Barely used set of interchangeable steel type with holder as shown in photos. Characters are big. 1/2" tall! Thanks for looking! Posted with
|
|
|
2 W & B HSS DRILLS W/ 4MT & 5MT SHANKS - 1-21/32" & 1-25/32"
aims 2 W& B HSS DRILLS W/ 4MT& 5MT SHANKS- 1-21/32" 1-25/32" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by W&B. These are 2 HSS Drills in good condition. Specifications: Sizes: 1-21/32" 1-25/32" Shanks: Morse Taper#4 with a 5MT sleeve& Morse Taper#5. Lengths of Cut: 9" 8-1/2" Flute Geometries: 4 Flute. Overall Lengths: 17-1/2" 17-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 W& B HSS DRILLS W/ 4MT& 5MT SHANKS- 1-21/32" 1-25/32" ... more2 W& B HSS DRILLS W/ 4MT& 5MT SHANKS- 1-21/32" 1-25/32" Reliable Tool Inc. c 2011 | Powered by
|
|
|
ASSORTMENT OF DENSO AND OTHERS SPARK PLUGS
aims ASSORTMENT OF DENSO AND OTHERS SPARK PLUGS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Denso and other mnfs. This is an assortment of Spark Plugs in Good condition. Lot Includes: Quanity: 25. Overall Length Range: 2-1/2" to 3-1/2" Comes as shown in pictures. Check out the photos and if you can't find what your looking for or have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ASSORTMENT OF DENSO AND OTHERS SPARK PLUGS Reliable Tool Inc. c 2011 | Powered by
|
|
|
ASSORTMENT OF REPLACEMENT PARTS FOR MAX20 TORCH
aims ASSORTMENT OF REPLACEMENT PARTS FOR MAX20 TORCH read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made HyperTherm. This is an assortment of Replacement Parts in Good condition. Lot Includes: 2) 020220: 5 pack of Electrodes. 1) 020382: 5 pack of Electrode Extended. 1) 020381: 5 pack of.029 Extended Nozzles. 1) 020239: Swivel Ring. Comes as shown in pictures. Check out the photos and if you can't find what your looking for or have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ASSORTMENT OF REPLACEMENT PARTS FOR MAX20 TORCH Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1405b018318-0x102-
|
|
|
3 PRECISION LEVELING BEAMS
aims 3 PRECISION LEVELING BEAMS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 3 Bubble Levels in Great condition. Specifications: Overall Length: 24" to 48" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 3 PRECISION LEVELING BEAMS 3 PRECISION LEVELING BEAMS Reliable Tool Inc. c 2011 | Powered by
|
|
|
KENNEDY TABLE SIDE SHELF
aims KENNEDY TABLE SIDE SHELF read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Kennedy. This is a TableSide Shelf in Good condition. Specifications: Overall Dimensions: 17-1/2" x 20" x 1" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNEDY TABLE SIDE SHELF Reliable Tool Inc. c 2011 | Powered by
|
|
|
LOT OF L.S. STARRETT SETTING FIXTURES
aims LOT OF L.S. STARRETT SETTING FIXTURES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by L.S. Starrett. This is a Lot of Setting Fixtures in Good condition. Specifications: Outside Diameter: 1-1/4" Inside Diameter: 3/4" Overall Length: 2" Comes as shown in pictures. Check out the photos and if you can't find what your looking for or have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF L.S. STARRETT SETTING FIXTURES Reliable Tool Inc. c 2011 | Powered by
|
|
 |