|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill Description The table applies to mini bench drill and drill bracket series. ... moreIt can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Specifications: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm Distance of grooves: 34mm T-slot size: standard size slot is 15X8X6mm Scale travel: 1.25mm (circle), 0.05mm (one cell) Packing List 1 * Worktable.
Buy It Now
Free Shipping Condition: New Location: United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill Description The table applies to mini bench drill and drill bracket series. ... moreIt can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Specifications: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm Distance of grooves: 34mm T-slot size: standard size slot is 15X8X6mm Scale travel: 1.25mm (circle), 0.05mm (one cell) Packing List 1 * Worktable.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR Tilting Milling Table Tilting Angle Milling Machine Adjustable Plate. VEVOR 6" Rotary Table Horizontal Vertical Dividing Plates ... morefor Milling Machine. VEVOR 2.2KW CNC Water Cooled Spindle Motor ER20 VFD Clamp Pump Pipe Collet 110V.
$45.00 Shipping Condition: Used Location: Torrance, United States Schaublin 102 Cross Slide. Imperial lead screws. The cross slide is just silky smooth with very very little backlash. When I felt how smooth it was I ... morerealized it must have been hardly used. We lightly used it over the last few years and have migrated over to Schaublin 70s and an HLVH.
Buy It Now
Free Shipping Condition: New Location: United States Why Choose VEVOR?. VEVOR Tilting Milling Table Tilting Angle Milling Machine Adjustable Plate. VEVOR 6" Rotary Table Horizontal Vertical Dividing Plates ... morefor Milling Machine. VEVOR 2.2KW CNC Water Cooled Spindle Motor ER20 VFD Clamp Pump Pipe Collet 110V.
$29.95 Shipping Condition: Used Location: Pittsburgh, United States This is for all parts pictured - Dunlap 109.0703 6" Metal Lathe Cross slide, Saddle, Carriage assembly 109.0703 - being sold as found for parts - tee ... morenuts are bent - cross slide and compound have good straight threads - please view all pictures - buyer to pay shipping.
Buy It Now
$89.95 Shipping Condition: Used Location: Edison, United States Cross Slide Milling Table. Model 92-12.
$24.75 Shipping Condition: Used Location: Sultan, United States Came off of a 618 lathe ( same as 101 I believe ) atlas Craftsman that I am parting out, the bed itself that it came off of did not see a lot of use so ... moreI suspect it didn’t either.
Buy It Now
$18.50 Shipping Condition: For parts or not working Location: Rockledge, United States See photos for size - The handle is pitted and the rest of the unit is usable for a project I was going to use it to make and other gear cutter as marked ... morein one of the photos, it is not for sale - anyways what you see is it, the only mark is 1766 on end.
$60.00 Shipping Condition: Used Location: French Lick, United States For sale from an estate 2 machinist lathe milling cutting tools parts.
$8.00 Shipping Condition: Used Location: Salt Lake City, United States Ball Crank Compound Slide Handle for Atlas/Craftsman 10" 12" lathes Part# L2-61 Good condition. Please see my other listings for more machinist's ... moretools. Tooling, parts and accessories. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1494a24ac71-0x10e-
Buy It Now
Condition: Used Location: Mchenry, United States This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. Faster & More ... moreEffective: Swing Over Bed: 8.3"/210 mm. Swing Over Cross Slide: 13.8"/350 mm.
Buy It Now
Free Shipping Condition: New Location: Chino, United States BATTERIES. TOOLS& MORE CONTACT US WARRANTY INFO ▫▫ Air Tools ▫▫ Air Riveters ▫▫ Air Saws& Blades ▫▫ Compressors& Tanks ▫▫ Grease Guns ▫▫ Grinders& ... moreGinding Discs ▫▫ Hammers. Drills& Screwdrivers ▫▫ Hopper Texture Guns ▫▫ Hoses. Reels& Accessories ▫▫ Nail Guns& Nails ▫▫ Paint& Spray Guns ▫▫ Punch Flange Tools ▫▫ Sand Blasters ▫▫ Sanders ▫▫ Sockets. Ratchets& Impacts ▫▫ Automotive ▫▫ Accessory Lights ▫▫ Air Compressors& Portables ▫▫ Air Horns ▫▫ Auto Body& Frame ▫▫ Auto Maintenance& Care ▫▫ Diagnostic Tools ▫▫ Electrical. Wiring& Testers ▫▫ Jacks. Engine Stands& Hoists ▫▫ Specialty Tools ▫▫ Tie Downs ▫▫ Tires& Wheels ▫▫ Truck. Trailer& Accessories ▫▫ Batteries ▫▫ 12 Volt SLA Batteries ▫▫ 12AH SLA Batteries ▫▫ 17 18 20 AH SLA Batteries ▫▫ 32 33 34 35 AH SLA Batteries ▫▫ 4 4.5 5 AH SLA Batteries ▫▫ 7 7.2 7.5 8 AH SLA Batteries ▫▫ 9 10 AH Batteries ▫▫ Misc. 12V SLA Batteries ▫▫ 6 Volt SLA Batteries ▫▫ 10. 12 AH SLA Batteries ▫▫ 4. 4.5, 5 AH SLA Batteries ▫▫ APC Computer Back Up Batteries ▫▫ Motorcycle Batteries ▫▫ 12N12A-4A-1 ▫▫ 12N12A-4A-1 AGM ▫▫ 12N14-3A ▫▫ 12N7-3B ▫▫ 12N9-4B-1 ▫▫ 12N9-4B-1 AGM ▫▫ 6N2-2A ▫▫ 6N2A-2C ▫▫ 6N4-2A ▫▫ 6N4B-2A ▫▫ 6N5.5-1D ▫▫ 6N6-1B ▫▫ 6N6-3B ▫▫ 6N6-3B-1 ▫▫ B54-6 ▫▫ YIX30L ▫▫ YT12B-BS YT12B-4 ▫▫ YT14B-BS YT14B-4 ▫▫ YT7B-BS YT7B-4 ▫▫ YT9B-BS YT9B-4 ▫▫ YTX12-BS ▫▫ YTX12A-BS ▫▫ YTX14-BS ▫▫ YTX14AH-BS ▫▫ YTX14AHL-BS ▫▫ YTX14L-BS ▫▫ YTX16-BS-1 ▫▫ YTX20-BS ▫▫ YTX20L-BS ▫▫ YTX24HL-BS ▫▫ YTX4L-BS ▫▫ YTX5L-BS ▫▫ YTX7A-BS ▫▫ YTX7L-BS ▫▫ YTX9-BS ▫▫ YTZ10S ▫▫ YTZ12S ▫▫ YTZ14S ▫▫ YTZ7S ▫▫ NiCd Batteries ▫▫ AA NiCd Button Top Cells ▫▫ Sub C NiCd Cells w/Tabs ▫▫ Optima Blue Top Batteries ▫▫ Optima Red Top Batteries ▫▫ Optima Yellow Top Batteries ▫▫ Other Batteries ▫▫ Power Wheel Batteries ▫▫ Replacement for GREEN Battery ▫▫ Replacement for RED Battery ▫▫ Replacement Dewalt Batteries ▫▫ 12 Volt Dewalt Replacements ▫▫ 14.4 Volt Dewalt Replacements ▫▫ 18 Volt Dewalt Replacements ▫▫ 24 Volt Dewalt Replacements ▫▫ 9.6 Volt Dewalt Replacements ▫▫ Rep
Buy It Now
$18.00 Shipping Condition: Used Location: Bristol, United States Clausing Colchester 15 inch lathe cross slide. Apron, cross screw nut for a 15 Clausing colchester. It is a little dirty needs some cleaning. The lathe ... morecame in and was a bit worn and fell over backwards. Have a bunch of parts in the main headstock and other gearboxes. Thank you for your Business! Shipping will be 80.00! God Bless!
Buy It Now
$24.75 Shipping Condition: Used Location: Brockton, United States You are Bidding on: Vintage AMT/Jacob#75 3" 2 way adjustable(cross X/Y axis) Machinists Drill Press Vise Great Condition Ask Any Questions you may ... morehave before bidding. PAYMENT I only accept PAYPAL. Payment is expected within 3 days. If something comes up and you are unable to do so. Please contact me or item will be relisted and Unpaid Case WILL automatically be opened. Shipping Shipping is as stated on shipping calculator. We DO Combine Shipping On Certain Items. Please E-Mail BEFORE For Quote. We use the Best Means of Shipping Depending on The Weight of Package To Give You The Best Shipping! I usually ship items out within 24-48 hours of receiving payment. If interested in purchasing Insurance ASK before Sending Payment! RETURNS Please ask any questions before bidding. If you are dissatisfied. Please contact me by email before leaving negative or neutral feedback to resolve the issue 100% All our items are from a Smoke Free Home! International Buyers– Please Note: I will ship internationally. Please ask for shipping costs before bidding! Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as‘gifts’ US and International government regulations prohibit such behavior. Thank you and have a Great Day!
Buy It Now
$10.60 Shipping Condition: Used Location: Buffalo, United States Jones&Lamson tool holder changed to fit Hardinge Slide. Front tool holder is on center with 3/8 tools. Mutilple tools fit. The adj screw has grad # of ... more.001 w/ divisions of .0001. Auction is for 1 front block. All pics are for Reference.pic is marked with what you will receive.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States This came off of a Lathe that where all the pieces were separated and in a box but this looks to be in good working condition. Both dials move very smoothly.
Buy It Now
Condition: Used Location: Petaluma, United States Everything works well. Has the cool Hardinge threading system with threading gearbox. Tapered spindle nose with good spindle bearings. Bison 4" 6 jaw ... morechuck. C5 collet closer. Very accurate machine, see photo of cut 3” from 6 jaw chuck.
Buy It Now
$10.60 Shipping Condition: Used Location: Buffalo, United States Jones&Lamson tool holder changed to fit Hardinge Slide. BACK tool holder is on center with 3/8 tools. Mutilple tools fit. The adj screw has grad # of ... more.001 w/ divisions of .0001. Auction is for 1 BACK block. All pics are for Reference.pic is marked with what you will receive.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States This is complete and looks good to my eyes. Everything runs smooth and even has a new feed nut as you can see in the photos. *I forgot to photograph this ... morewith the piece that captures this rear of this onto the lathe bed but it is included. *
Buy It Now
Free Shipping Condition: New Location: Chino, United States Application The table is not only suitable for miniature table drill and drill stand series, but also other suitable machine tools. Specification Material: ... moreAluminium Alloy Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell) Package Included 1*Milling Machine Table.
Buy It Now
Condition: Used Location: Lenapah, United States Machine RPM Range 250 RPM to 3600RPM 2 Speed Motor Flat Belt Drive.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States This is in good working condition and everything looks good on it. I see no cracks or damage. It spins in and out smoothly.
Buy It Now
$12.00 Shipping Condition: Used Location: Granite Springs, United States
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$15.00 Shipping Condition: Used Location: Sylvania, United States Note: The adjustable nut fits the Imperial Emco Maximat Super 11 lathe. This is by far the largest group of Emco lathe owners in the world. Emco Maximat ... moreMiller.. Emco Compact 10.
Buy It Now
Free Shipping Condition: New Location: United States Machine Vise, Cross Slide Vise, Stationary Base, Jaw Width (In.). 6 in, Jaw Opening (In.). 6 in, Throat Depth (In.). 2 in, Overall Length (In.). 14-5/8, ... moreOverall Height (In.). 7-3/8, Max. Travel 3-1/2 in x 4 in, Clamping Force (Lb.).
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States BATTERIES. TOOLS& MORE CONTACT US WARRANTY INFO ▫▫ Air Tools ▫▫ Air Riveters ▫▫ Air Saws& Blades ▫▫ Compressors& Tanks ▫▫ Grease Guns ▫▫ Grinders& ... moreGinding Discs ▫▫ Hammers. Drills& Screwdrivers ▫▫ Hopper Texture Guns ▫▫ Hoses. Reels& Accessories ▫▫ Nail Guns& Nails ▫▫ Paint& Spray Guns ▫▫ Punch Flange Tools ▫▫ Sand Blasters ▫▫ Sanders ▫▫ Sockets. Ratchets& Impacts ▫▫ Automotive ▫▫ Accessory Lights ▫▫ Air Compressors& Portables ▫▫ Air Horns ▫▫ Auto Body& Frame ▫▫ Auto Maintenance& Care ▫▫ Diagnostic Tools ▫▫ Electrical. Wiring& Testers ▫▫ Jacks. Engine Stands& Hoists ▫▫ Specialty Tools ▫▫ Tie Downs ▫▫ Tires& Wheels ▫▫ Truck. Trailer& Accessories ▫▫ Batteries ▫▫ 12 Volt SLA Batteries ▫▫ 12AH SLA Batteries ▫▫ 17 18 20 AH SLA Batteries ▫▫ 32 33 34 35 AH SLA Batteries ▫▫ 4 4.5 5 AH SLA Batteries ▫▫ 7 7.2 7.5 8 AH SLA Batteries ▫▫ 9 10 AH Batteries ▫▫ Misc. 12V SLA Batteries ▫▫ 6 Volt SLA Batteries ▫▫ 10. 12 AH SLA Batteries ▫▫ 4. 4.5, 5 AH SLA Batteries ▫▫ APC Computer Back Up Batteries ▫▫ Motorcycle Batteries ▫▫ 12N12A-4A-1 ▫▫ 12N12A-4A-1 AGM ▫▫ 12N14-3A ▫▫ 12N7-3B ▫▫ 12N9-4B-1 ▫▫ 12N9-4B-1 AGM ▫▫ 6N2-2A ▫▫ 6N2A-2C ▫▫ 6N4-2A ▫▫ 6N4B-2A ▫▫ 6N5.5-1D ▫▫ 6N6-1B ▫▫ 6N6-3B ▫▫ 6N6-3B-1 ▫▫ B54-6 ▫▫ YIX30L ▫▫ YT12B-BS YT12B-4 ▫▫ YT14B-BS YT14B-4 ▫▫ YT7B-BS YT7B-4 ▫▫ YT9B-BS YT9B-4 ▫▫ YTX12-BS ▫▫ YTX12A-BS ▫▫ YTX14-BS ▫▫ YTX14AH-BS ▫▫ YTX14AHL-BS ▫▫ YTX14L-BS ▫▫ YTX16-BS-1 ▫▫ YTX20-BS ▫▫ YTX20L-BS ▫▫ YTX24HL-BS ▫▫ YTX4L-BS ▫▫ YTX5L-BS ▫▫ YTX7A-BS ▫▫ YTX7L-BS ▫▫ YTX9-BS ▫▫ YTZ10S ▫▫ YTZ12S ▫▫ YTZ14S ▫▫ YTZ7S ▫▫ NiCd Batteries ▫▫ AA NiCd Button Top Cells ▫▫ Sub C NiCd Cells w/Tabs ▫▫ Optima Blue Top Batteries ▫▫ Optima Red Top Batteries ▫▫ Optima Yellow Top Batteries ▫▫ Other Batteries ▫▫ Power Wheel Batteries ▫▫ Replacement for GREEN Battery ▫▫ Replacement for RED Battery ▫▫ Replacement Dewalt Batteries ▫▫ 12 Volt Dewalt Replacements ▫▫ 14.4 Volt Dewalt Replacements ▫▫ 18 Volt Dewalt Replacements ▫▫ 24 Volt Dewalt Replacements ▫▫ 9.6 Volt Dewalt Replacements ▫▫ Rep
Buy It Now
Free Shipping Condition: New Location: Chino, United States A fully adjustable heavy duty 4" Cross Slide Vise. Turn your drill press into a milling machine. This cross slide drill press vise features: Heavy ... moreduty construction. Jaw width: 4" Maximum jaw opening: 3 1/2" Vise travel: 5 1/2" Vise and cross slide have adjustable shims for fine adjustment, Base size: 9" x 5" Overall unit size 11" x 11" x 6 1/4" Precision threaded clamping and cross slide screws, Cross slides have removable adjusting crank handles
Buy It Now
Free Shipping Condition: New Location: Chino, United States Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill. 1 Worktable. The table applies to mini bench drill and drill bracket ... moreseries. Material:Aluminium Alloy. The bench is made up of several adjustable dovetail aluminum alloy.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States This is in good working condition and everything looks good on it. I see no cracks or damage on the main parts of this. Two of the hand wheels have broken ... moreoff pieces, the knobs still work as is while you find replacements.. The slides spine in and out smoothly.
Buy It Now
$65.00 Shipping Condition: Used Location: Revere, United States FREE SHIPPING IN US! South Bend Lathe 9" 10" Cross Slide Screw Feed Nut AS95NK1. New Cross Slide Nut for South Bend 9" 10" Lathes ... morewithout taper attachment. South Bend Part Number AS95NK1. ACME 7/16" x 10 Left Hand Threads 11/16" diameter stem International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying I leave Feedback at time of shipping to notify buyer of shipment. No feedback ransoming here! Questions? email me! Thanks for looking.
Buy It Now
$6.75 Shipping Condition: Used Location: Saint Petersburg, United States Hardinge Model BA Lathe Riser Bed Adapter for a Hardinge HC Chucker or Hardginge HLV-H Tool Room lathe so you can use any of the attachments from a Hardinge ... moreDV-59 as pictured with tail stock and radius tool. The Tail stock& radius tool are not part of the auction. But are for sale in my e bay store. The notch that is machine in the front, is for the gear of the production cross slide. Weight is 16 lbs. For shipping quotes call Tina at 727-362-8318. All other questions, call Gerry at 727-547-0616. Local inspections& pick-ups, are welcome. never a handling fee. 30 day return. On Dec-16-13 at 20:23:57 PST. Seller added the following information:
Buy It Now
Condition: Used Location: Bradenton, United States Model: TAKISAWA TSL-800. Engine Lathes. Full Cast Base Design 8” Cushman three jaw chuck 10” Buck four jaw chuck Steady rest ROHM Live center Threading ... moredial Change gears Foot treadle 5 H.P. Spindle motor Machine is wired for 220 volt / 3 phase / 60 H.Z Machine weight- 2500 Lbs.
Buy It Now
$13.24 Shipping Condition: New Location: Kerrville, United States UP FOR SALE IS A REPRODUCTION OF THE CLAUSING 5900 12" CROSS SLIDE SCREW. THE SCREW WILL FIT ANY OF THE 5900 SERIES LATHES SUCH AS 5904. THIS SCREW WILL ... moreNOT FIT THE 4900 10" LATHES OR THE 6900 14" LATHES.
Buy It Now
$30.00 Shipping Condition: Used Location: Milroy, United States Hardinge USA. you will need to clean and lubricate this before use. SOLD AS PICTURED -- THERE IS A CHIP -- look at the pictures.
Buy It Now
$35.00 Shipping Condition: New Location: Canada New Old Stock Bridgeport Cross Slide Travel Stop Assembly Came from the inventory of a decades long closed bridgeport distributor. Hard to find Please ... moreSee additional Pictures Below the Description.
Buy It Now
Free Shipping Condition: New Location: Chino, United States BATTERIES. TOOLS& MORE CONTACT US WARRANTY INFO ▫▫ Air Tools ▫▫ Air Riveters ▫▫ Air Saws& Blades ▫▫ Compressors& Tanks ▫▫ Grease Guns ▫▫ Grinders& ... moreGinding Discs ▫▫ Hammers. Drills& Screwdrivers ▫▫ Hopper Texture Guns ▫▫ Hoses. Reels& Accessories ▫▫ Nail Guns& Nails ▫▫ Paint& Spray Guns ▫▫ Punch Flange Tools ▫▫ Sand Blasters ▫▫ Sanders ▫▫ Sockets. Ratchets& Impacts ▫▫ Automotive ▫▫ Accessory Lights ▫▫ Air Compressors& Portables ▫▫ Air Horns ▫▫ Auto Body& Frame ▫▫ Auto Maintenance& Care ▫▫ Diagnostic Tools ▫▫ Electrical. Wiring& Testers ▫▫ Jacks. Engine Stands& Hoists ▫▫ Specialty Tools ▫▫ Tie Downs ▫▫ Tires& Wheels ▫▫ Truck. Trailer& Accessories ▫▫ Batteries ▫▫ 12 Volt SLA Batteries ▫▫ 12AH SLA Batteries ▫▫ 17 18 20 AH SLA Batteries ▫▫ 32 33 34 35 AH SLA Batteries ▫▫ 4 4.5 5 AH SLA Batteries ▫▫ 7 7.2 7.5 8 AH SLA Batteries ▫▫ 9 10 AH Batteries ▫▫ Misc. 12V SLA Batteries ▫▫ 6 Volt SLA Batteries ▫▫ 10. 12 AH SLA Batteries ▫▫ 4. 4.5, 5 AH SLA Batteries ▫▫ APC Computer Back Up Batteries ▫▫ Motorcycle Batteries ▫▫ 12N12A-4A-1 ▫▫ 12N12A-4A-1 AGM ▫▫ 12N14-3A ▫▫ 12N7-3B ▫▫ 12N9-4B-1 ▫▫ 12N9-4B-1 AGM ▫▫ 6N2-2A ▫▫ 6N2A-2C ▫▫ 6N4-2A ▫▫ 6N4B-2A ▫▫ 6N5.5-1D ▫▫ 6N6-1B ▫▫ 6N6-3B ▫▫ 6N6-3B-1 ▫▫ B54-6 ▫▫ YIX30L ▫▫ YT12B-BS YT12B-4 ▫▫ YT14B-BS YT14B-4 ▫▫ YT7B-BS YT7B-4 ▫▫ YT9B-BS YT9B-4 ▫▫ YTX12-BS ▫▫ YTX12A-BS ▫▫ YTX14-BS ▫▫ YTX14AH-BS ▫▫ YTX14AHL-BS ▫▫ YTX14L-BS ▫▫ YTX16-BS-1 ▫▫ YTX20-BS ▫▫ YTX20L-BS ▫▫ YTX24HL-BS ▫▫ YTX4L-BS ▫▫ YTX5L-BS ▫▫ YTX7A-BS ▫▫ YTX7L-BS ▫▫ YTX9-BS ▫▫ YTZ10S ▫▫ YTZ12S ▫▫ YTZ14S ▫▫ YTZ7S ▫▫ NiCd Batteries ▫▫ AA NiCd Button Top Cells ▫▫ Sub C NiCd Cells w/Tabs ▫▫ Optima Blue Top Batteries ▫▫ Optima Red Top Batteries ▫▫ Optima Yellow Top Batteries ▫▫ Other Batteries ▫▫ Power Wheel Batteries ▫▫ Replacement for GREEN Battery ▫▫ Replacement for RED Battery ▫▫ Replacement Dewalt Batteries ▫▫ 12 Volt Dewalt Replacements ▫▫ 14.4 Volt Dewalt Replacements ▫▫ 18 Volt Dewalt Replacements ▫▫ 24 Volt Dewalt Replacements ▫▫ 9.6 Volt Dewalt Replacements ▫▫ Rep
Buy It Now
Condition: Used Location: Pomona, United States DISTANCE BETWEEN CENTERS 36". POWER FEEDS BOTH CROSS & LONGITUDINAL. 72"L x 32"W x 50"H. CROSS-SLIDE TRAVEL, PLUNGE 4.7". Wheeler Machinery Sales, Inc. ... moreSPINDLE BORE 1.50". SPINDLE MOTOR 3 HP (DIRECT DRIVE).
Buy It Now
$25.00 Shipping Condition: Used Location: El Monte, United States
Buy It Now
$18.40 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$23.20 Shipping Condition: Used Location: North Tonawanda, United States The brass nut is pretty tight. It doesn’t have much use. The dial is a 250 grad dial. ( depends on your device ). There is a couple of options.
Buy It Now
Free Shipping Condition: New Location: United States Why Choose VEVOR?. VEVOR Wood Lathe 14" x 40" Wood Turning Benchtop Lathe 4 Adjustable Speed 400W. VEVOR Mini Lathe Machine 24V 96W Mini Wood Lathe Tools ... more2.76 in x 6.3 in 7 Speeds. Variable speed: 50-2250 RPM.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$39.99 Shipping Condition: Used Location: Lombard, United States Used condition with dings and scratches. Please see photos for details. Thanks for looking Shipping price to the lower 48 only
Buy It Now
$59.00 Shipping Condition: Used Location: Medina, United States Gold International Machinery Corporation | Hardinge Lever Operated Double Tool Cross Slide. Model DV-7 Our Inventory Number: 1370-440 Technical Specification: ... moreWill fit Hardinge Dovetail beds on HSL-59. DV-59, DSM-59 and VBS lathes Table size: 12-1/4" x 3-1/2" Lever feed: approximately 4" With(2) adjustable stops Estimated weight: 25 lbs. This can be shipped via UPS Ground. Please inquire for a rate. Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions. Phone(M-F 9am-5pm EST) 1-800-619-GOLD(4653) Please E-Mail David Gold anytime at. Please note that freights costs are determined by the
Buy It Now
$13.60 Shipping Condition: Used Location: Maspeth, United States Atlas Craftsman 618 101 6”Cross Slide Feed Leadscrew M6-36A. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$30.00 Shipping Condition: Used Location: Alfred, United States GOES ONTO THE BACK OF THE MACHINE. CLAMPING BOLT IS MISSING.
Buy It Now
$12.00 Shipping Condition: Used Location: Sylvania, United States Note: This support bracket and bearings fit the Imperial Emco Maximat Super 11 lathe. This is by far the largest group of Emco lathe owners in the world. ... moreEmco Maximat Miller..
Buy It Now
$10.95 Shipping Condition: Used Location: Berry, United States Lots of surface pitting but very solid. No cracks or bends. Weighs 1 lb. 9 oz. 6 1/2" long.
Buy It Now
$82.03 Shipping Condition: New – Open box Location: Venice, United States Compact Lathe. Minimum Spindle Speed - 100 RPM. Maximum Spindle Speed - 2500 RPM. Phase - Single. Cross Slide Travel - 2.56 in. Distance Between Centers ... more- 12 in. New - Open Box - Item functions properly (see video), with no signs of previous use (see photo).
Buy It Now
Condition: Used Location: Dayton, United States Swing - 13". Swing over cross slide - 7 11/16". Cross Feeds (40). 0004-.0130 IPR. Longitudinal Feeds (40). 0008-.0287 IPR. Spindle speeds (12) - 40 to ... more2500 rpm. Power 5 horsepower. Can be inspected under power.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States This is in good working condition and everything looks good on it. I see no cracks or damage on the main parts of this. Two of the have broken off pieces, ... morethe knobs still work as is while you find replacements.. The slides spine in and out smoothly.
Buy It Now
Free Shipping Condition: Used Location: Anderson, United States In good working condition, but has scratches, signs of use and surface marks.
Buy It Now
$4.50 Shipping Condition: New Location: Cross Plains, United States This dial indicator mounting bracket and magnetic block, allows mounting of a DIAL INDICATOR (NOT INCLUDE) to the back side of the lathe saddle. SB 9" ... morelathes (or lathes WITHOUT hole) require drill and tapping of mounting hole in lathe saddle.
Buy It Now
Condition: For parts or not working Location: Venice, United States 13 x 40 Bench Lathe -CQ632CX1000. Lathe Stand -13X40 STAND. Phase - Single. Swing - 13 in. Sold As-Is, in non-functioning state. Distance Between Centers ... more- 40 in. Will there be a loading dock or forklift.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1 Worktable. The table applies to mini bench drill and drill bracket series. The bench is made up of several adjustable dovetail aluminum alloy. Scale ... moretravel: 1.25mm (circle), 0.05mm (one cell). It can also be applied to other suitable machine.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States BATTERIES. TOOLS& MORE CONTACT US WARRANTY INFO ▫▫ Air Tools ▫▫ Air Riveters ▫▫ Air Saws& Blades ▫▫ Compressors& Tanks ▫▫ Grease Guns ▫▫ Grinders& ... moreGinding Discs ▫▫ Hammers. Drills& Screwdrivers ▫▫ Hopper Texture Guns ▫▫ Hoses. Reels& Accessories ▫▫ Nail Guns& Nails ▫▫ Paint& Spray Guns ▫▫ Punch Flange Tools ▫▫ Sand Blasters ▫▫ Sanders ▫▫ Sockets. Ratchets& Impacts ▫▫ Automotive ▫▫ Accessory Lights ▫▫ Air Compressors& Portables ▫▫ Air Horns ▫▫ Auto Body& Frame ▫▫ Auto Maintenance& Care ▫▫ Diagnostic Tools ▫▫ Electrical. Wiring& Testers ▫▫ Jacks. Engine Stands& Hoists ▫▫ Specialty Tools ▫▫ Tie Downs ▫▫ Tires& Wheels ▫▫ Truck. Trailer& Accessories ▫▫ Batteries ▫▫ 12 Volt SLA Batteries ▫▫ 12AH SLA Batteries ▫▫ 17 18 20 AH SLA Batteries ▫▫ 32 33 34 35 AH SLA Batteries ▫▫ 4 4.5 5 AH SLA Batteries ▫▫ 7 7.2 7.5 8 AH SLA Batteries ▫▫ 9 10 AH Batteries ▫▫ Misc. 12V SLA Batteries ▫▫ 6 Volt SLA Batteries ▫▫ 10. 12 AH SLA Batteries ▫▫ 4. 4.5, 5 AH SLA Batteries ▫▫ APC Computer Back Up Batteries ▫▫ Motorcycle Batteries ▫▫ 12N12A-4A-1 ▫▫ 12N12A-4A-1 AGM ▫▫ 12N14-3A ▫▫ 12N7-3B ▫▫ 12N9-4B-1 ▫▫ 12N9-4B-1 AGM ▫▫ 6N2-2A ▫▫ 6N2A-2C ▫▫ 6N4-2A ▫▫ 6N4B-2A ▫▫ 6N5.5-1D ▫▫ 6N6-1B ▫▫ 6N6-3B ▫▫ 6N6-3B-1 ▫▫ B54-6 ▫▫ YIX30L ▫▫ YT12B-BS YT12B-4 ▫▫ YT14B-BS YT14B-4 ▫▫ YT7B-BS YT7B-4 ▫▫ YT9B-BS YT9B-4 ▫▫ YTX12-BS ▫▫ YTX12A-BS ▫▫ YTX14-BS ▫▫ YTX14AH-BS ▫▫ YTX14AHL-BS ▫▫ YTX14L-BS ▫▫ YTX16-BS-1 ▫▫ YTX20-BS ▫▫ YTX20L-BS ▫▫ YTX24HL-BS ▫▫ YTX4L-BS ▫▫ YTX5L-BS ▫▫ YTX7A-BS ▫▫ YTX7L-BS ▫▫ YTX9-BS ▫▫ YTZ10S ▫▫ YTZ12S ▫▫ YTZ14S ▫▫ YTZ7S ▫▫ NiCd Batteries ▫▫ AA NiCd Button Top Cells ▫▫ Sub C NiCd Cells w/Tabs ▫▫ Optima Blue Top Batteries ▫▫ Optima Red Top Batteries ▫▫ Optima Yellow Top Batteries ▫▫ Other Batteries ▫▫ Power Wheel Batteries ▫▫ Replacement for GREEN Battery ▫▫ Replacement for RED Battery ▫▫ Replacement Dewalt Batteries ▫▫ 12 Volt Dewalt Replacements ▫▫ 14.4 Volt Dewalt Replacements ▫▫ 18 Volt Dewalt Replacements ▫▫ 24 Volt Dewalt Replacements ▫▫ 9.6 Volt Dewalt Replacements ▫▫ Rep
|
|
|
|
RARE BOXWOOD CROSS CALIPER GAUGE SLIDE RULE DRING & FAGE,CUSTOMS & EXCISE
SHOW ME ANOTHER OF THESE? THIS IS A MUST FOR ANY COLLECTOR IN MY EYES A good Cross Callier Gauger's Boxwood Excise Slide Rule/caliper gauge made by Dring& Fage for Her Majesty's Customs& Excise THIS ITEM ALSO CAME FROM THE MUSEUM OF CUSTOMS AND EXCISE"DRING& FAGE Ltd" is marked on the rule. CUSTOMS(CROWN) EXCISE" also marked on the rule The boxwood slide rule with a slide and brass? bound ends; The slide rule has one set of inch measurements on the face Scale on front face: inches Upper front face: 1/2 3/4 1inch The slide rule is in ok condition for its age- it's straight. The graduations, numbers are very readable. There is damage to the item on the inside, the runner is split at one end as shown in last picture. Overall i say this is in okish condition. Every number and marking is readable the stamp ... moremarks are also readable, however there is a split along the inside rail, this ideally needs gluing back in place to prevent damage to the piece. The item has NOT been cleaned. It could do definitely with one, but i will leave that to an expert. The rule is a length of 30 inches. Starting at 10 and ending at 40 this can be doubled so roughly 60 inches length when expanded Please see photos for details. I've set a small starting price on this wonderful rule. So good luck to you all on bidding. And be sure to view my other items as many many more dring and fage items are being listed Depending on the country you are bidding from please confirm postage with myself. The £14 listed is a general postage cots and could be different
|
|
|
Vintage Silver Santiago de Compostela Slide Shell Charms Medals Enamel Cross 2
Vintage Santiago de Compostela Charm This is a vintage pair of religious charm medals from Santiago de Compostela. This is a major pilgrimage stop for Catholic pilgrims. The Cathedral is truly a sight to behold(I've been there! The charms are silver scallop shell slides with an enamel red cross on the top(both symbols of Santiago) The back depicts the Cathedral. Inside is'Recuerdo de Santiago' and a figure of St. James(I believe) These measure 1/2" in diameter and 1/8" thick. They are not marked. But I think they are either sterling silver or at least plated. Condition: There is some slight darkening from age. Please feel free to ask questions before buying this item. Please look in my store for many more wonderful items. Check out my! Please pay within 5 days of close of sale. Or notify me with any changes. Or requests. ... moreI accept Paypal. My goal is to have happy customers. I describe my items to the best of my. Ability and mention all flaws that are visible to me. No matter how small. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
1880 Antique Microscope Slide Cross Section Stem Of Floribunda For Polariscope
Very beautiful 1880 antique microscope slide of cross section of Stem of Florabunda for polariscope. Posted with
|
|
|
9" south bend lathe taper attachment cross slide
Cross slide for a 9" south bend lathe. Shipping is FREE to U.S. Thanks Mike
|
|
|
Axelson Cross Slide Compound w/ HD Boring bar Holder
This compound was removed from a 24' Axleson Lathe I sold to a customer who didn't need it for his purpose.
|
|
|
Magnificent Antique Gold Filled POCKET WATCH CHAIN Heart Slide Cross Pendant Vtg
just acquired from a local estate. Offering This truly wonderful antique yellow gold filled unmarked POCKET WATCH CHAIN WITH slide and cross pendant.in very good condition.showing only moderate signs of age/wear.mininal brassing.11.25" long with a cross 1 1/4" in length.weighs 10.5 grams. please look at pics and e-mail me with any questions. shipping is $free to lower 48/stateside. overseas pays actual. On Mar-21-11 at 18:19:03 PDT. Seller added the following information:
|
|
|
Vintage 4 Craftsman Stand Horizontal Cross Slide Rails, Table Saw, Band - used
Thesa are 4 used working adjustable support rails that came off of a craftsman table saw stand. Measure about 15 1/4" long, has 8 lock down bolts with them that may need a little oil. Shipping for the lower 48 states will be $ 10.75 and thanks for looking. Please make sure your shipping information is updated. Confirmed addresses please. We try our best to describe the items as they are. Most of our items are purchased at estate or yard sales and sold as is. Please contact us if you feel we have not described the item well. We will work with you. Thank you.
|
|
|
Cross Slide Chip Guard for Craftsman / Atlas 101.07403 12" Lathe
Cross Slide Chip Guard 9-37A for Craftsman/ Atlas 101.07403 12" Lathe. Will also fit Craftsman/ Atlas 10" models. Please see my other listings for more Crafts man/ Atlas Lathe Parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
CROSS SLIDE PART SOUTH BEND 9" 10K LATHE CASTING ONLY ~~• } ((((º =: ~•
X.jpg" XXXXXXX It's in good condition. I have many small SB parts and will sell cheap enough to buy for spares. Just return it in a few days if you don't like it. I guarantee your satisfaction. Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal balance and not from a credit card. I'm also selling various supplies and CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GIB SOUTH BEND 10K or 9 inch LATHE CROSS SLIDE ==: ~~• } ((((º ==: ~
I have many small SB parts and will sell cheap enough to buy for spares. It's in good condition. I have many small SB parts and will sell cheap enough to buy for spares. Just return it in a few days if you don't like it. I guarantee your satisfaction. Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal balance and not from a credit card. I'm also selling various supplies and CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SMC MXS16-30 Pneumatic Air Table Slide 30mm Stroke Slides Compund 100 Cross
Questions? Call us: 1-877-328-9236. SMC MXS16-30 Pneumatic Air Table Slide 30mm Stroke Slides Compund 100 Cross. Manufacturer: SMC Model: MXS16-30 Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: SMC Condition: Used. Comes in non-original packaging. There are some scratches on the outer assembly from previous usage. The air slide table is in good condition. Notes: No testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) SMC MXS16-30 Pneumatic Air Table Slide 30mm Stroke, Specifications: Manufacturer: SMC, Model: MXS16-30, Operating Pressure: 21.7 to 101.5 PSI, Piston Speed: 50 to 500 mm/Sec. Stroke Length Tolerance: +1 mm, Improved Workpiece Mounting Repeatability, Flush Mountable Auto Switches, Dual Piston rod, Bore x Stroke: ... more16mm x 30mm, SKU: M05N054 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shippin
|
|
|
Levin Watchmaker Lathe Compound Cross Slide, for 10 mm Lathe
Levin Watchmaker Lathe Compound Cross Slide. For 10 mm Lathe high quality. Amazing condition, working very smooth there is tool post holder- made by tool maker. Working well. made in USA By Levin sizes: Weight 1.3 kg = 2.86 pounds Length including handle: 16 cm Width including Handle: 14.5 cm Maximum in length: 23 cm*the item will ship by EMS! Fast and secure shipping Please look at my other items for sale. And I wish You successful bidding! Please feel free to email me with any questions you may have about this item. I sincerely appreciate Your interest. I try to use recycled packaging materials. Not only to save money for you and me, but to preserve the environment. Additional photos can always be provided upon request. For payments I accept PayPal only. Please make your payment within 7 days of winning auction, or item will be relisted. ... moreImport duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. for any question. Just ask and i will answer in few hours.
|
|
|
Echinus Spines Microscope Slide - Sea Urchin Spine Cross-sections
Cross-sections of a spine of an Esculentus sea urchin(echinus) Cutting the spine at different places yielded different symmetrical patterns. By Watson& Sons. London. For information on early microscopy. Visit and Please see our other microscopy items. Multiple purchases save on shipping. Postage price includes insurance.
|
|
|
ATLAS CRAFTSMAN 10/12" LATHE CROSS SLIDE W/GIB AND GIB SCREWS 10-301
Pretty good Atlas/Craftsman 10 and 12" lathe cross slide with gib and gib screws. A little wear on the post but no damage and has legible numbers.
|
|
|
Machinist Milling Vise W/ Cross Slide Drill Press Holding Clamp Grip
jaw opening is 3 1/2 inchs travel is 5 1/2 inchs x 3 1/4 inchs Thanks I bought this here on E bay used it a couple of times and upgraded my machine and no longer in need of this. My loss your gain We will be listing many other fine items over the next few months so please check out our other auctions, all won items will be combined to save on your shipping as long as they are all paid for at the same time, questions please ask before you bid. I will be happy to send more pics of any item,but please do not wait till last few minutes of auction,Feedback is left after you leave it for me,and I know you received item and are happy with transaction. Do not pay if you are bidding or buying other items,please let me know if you are bidding on other items so I can combine your shipping. Please make payment within 5 days or contact me on how you are ... moremaking payment if not through Pay pal, Free shipping where offered is only for the lower 48 states THANKS AND GOOD LUCK
|
|
|
SWEET!! K.O. LEE #BA986 RADIAL CROSS-SLIDE GRINDING FIXTURE
aims SWEET! K.O. LEE#BA986 RADIAL CROSS-SLIDE GRINDING FIXTURE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by K.O. Lee. This is a K.O Lee Precision Cross Slide Grinding Fixture in Good condition. Model# BA986 Features: Concave or Convex Radii can be ground on shank mounted cutters. Surface tangent to radius can be ground using longitudinal table feed. This radial grinding fixture is precision instrument for generating convex and concave radii on cutting tools. Sharpen existing radii on endmills. Ball endmills, various milling cutters with or without mounting arbors. The basic fixture is also used to generate a radius on shank mounted balls. Burr blanks, ball endmills, and other such semi-ball forms. Generate a convex or concave radius on the grinding wheel when form ... moregrinding. Unit is fully universal and may be used on any makes of tool grinders. Roller bearings are employed between the fixture base and its pivoting worktable. Which swings 360 deg. Crossfeed and longitudinal feed screws of the lower and upper slide sections are calibrated in.001" 050"revolution) Lever arm allows fixture to be tilted away from the grinding wheel for quick checking of work. The entire pivoting saddle and turntable may be fixed at a tilt up to 15 deg from horizontal. Dials can be re-set to zero without moving the slides. Adjustable dovetail ways can be locked. Features and Specifications: Y-Slide: 5" X-slide: 4" Center Height: 6" Concave radius: 2" Convex radius: 6" Table surface height: 5 1/2" T-slot: 7/16" Overall dimensions: 16" x 13" x 16" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SWEET! K.O. LEE#BA986 RADIAL CROSS-SLIDE G
|
|
|
LOGAN 10" 1800 SERIES LATHE COMPOUND/CROSS SLIDE SWIVEL LA-746
Later 10" Logan compound swivel. A couple of small dings but. Very legible index numbers.
|
|
|
DELTRON DEL-TRON NBT-2125A DPI 2120 CROSS BEARING SLIDE TABLE LINEAR MOTION
DELTRON DEL-TRON NBT-2125A DPI 2120 CROSS BEARING SLIDE TABLE LINEAR MOTION Description. DELTRON DEL-TRON NBT-2125A DPI 2120 CROSS BEARING SLIDE TABLE LINEAR MOTION. Length 5" Width 1.5" Height.83" Travel of slide is 1.5" in both directions on alternate sides Screw size- unsure but I include the screws as shown in pic. EXCELLENT CONDITION!
|
|
|
Advance Products Rotary Cross Slide Table
Advance Products Rotary Cross Slide Table 11" x 11" x 9.25" High Both in Excellent Working Condition Questions? Call Robert at 607-259-5615
|
|
|
Marshall Cross Slide for 8MM Watchmakers Lathe
Marshall Cross Slide for 8MM Watchmakers Lathe You are bidding on a Marshall triple cross slide for an 8MM watchmaker's lathe. It has been well used. But is still tight and operation of the slides is smooth. Note that the shoe on the bottom is missing. Also, one of the handles has been replaced. The previous owner drilled and threaded a couple of hole in it near the"Marshall" I don't know what those are for. He also drilled a hole that now has a pin in it to index to the'0' mark(to the lower left of"Marshall" The fine print: I will send an invoice to the winning bidder within 24 hours of the auction end. Payment must be received within 7 days of the auction end or the item will be relisted. You will receive a confirming e-mail through Paypal Shipping when I receive your payment and ship your package. During ... morethe week. I will usually ship within 24 hours of receiving payment. I always reciprocate on feedback. Once you receive your item and are satisfied with your purchase. I would appreciate your leaving eBay feedback for me. I will do the same for you. All items are sold with a 14-day. No-questions-asked return policy, unless specifically stated otherwise in the item description. If you are unhappy with your purchase for any reason, you may return it within 14 days for a full refund of your bid amount. Please contact me for return instructions before shipping the item back to me. All shipping charges remain the buyer's responsibility unless I have made a significant error in the description of the item. A note for bidders outside the United States. Normally I list my items for shipment within the United States. Canada, and Japan only. However, on most items, I will make an exception for bidders from other countries who have an established, positive feedback record as long as that country is served by USPS International Priority Mail. Please contact me if you live outside of the United States, Canada or Japan and wish to bid on one of my items. Note. However, that I will not
|
|
|
Small Cross Slide and Tool Holder for a Watchmakers Lathe
Cross Slide. Tool Holder for a Watchmakers Lathe You are bidding on a small home-made cross slide with tool holder for a watchmaker's lathe. The base of the cross slide is about 3 inches long. It has a two-piece tool holder mounted to the top. The knobs are knurled and operate smoothly. Note that the bottom mounting bolt. To attach it to the bed, is missing. All-in-all, a fairly well made little slide. The fine print: I will send an invoice to the winning bidder within 24 hours of the auction end. Payment must be received within 7 days of the auction end or the item will be relisted. You will receive a confirming e-mail through Paypal Shipping when I receive your payment and ship your package. During the week. I will usually ship within 24 hours of receiving payment. I always reciprocate on feedback. Once you receive your item and are ... moresatisfied with your purchase. I would appreciate your leaving eBay feedback for me. I will do the same for you. All items are sold with a 14-day. No-questions-asked return policy, unless specifically stated otherwise in the item description. If you are unhappy with your purchase for any reason, you may return it within 14 days for a full refund of your bid amount. Please contact me for return instructions before shipping the item back to me. All shipping charges remain the buyer's responsibility unless I have made a significant error in the description of the item. A note for bidders outside the United States. Normally I list my items for shipment within the United States. Canada, and Japan only. However, on most items, I will make an exception for bidders from other countries who have an established, positive feedback record as long as that country is served by USPS International Priority Mail. Please contact me if you live outside of the United States, Canada or Japan and wish to bid on one of my items. Note. However, that I will not falsify Customs forms and I only use International Priority Mail when shipping outside the U.S. unless you have made other arrangements with
|
|
|
WOLF JAHN & CO cross slide for Watchmaker lathe. NR.
Offer for this auction is a used WOLF JAHN& CO cross slide for Watchmaker lathe( Geneva style) The tool is used but still in good working condition. All the parts moves and turns like the way it should. The lead screws turns smooth with a small backlash; the bottom screw feel more tight then the top one. The bottom slide travel about 2 1/2" and the top slide travel about 2" Over all, this is a used tool but still in good working condition, the finish still good with some discolor here and there but have no rust on it. Please look at all the pictures, if you need more pictures or have any question, please feel free to send me an email. S& H: is $10.00 for all the US bidders. International bidders are welcome. Sorry no Japan. I will accept Pay-Pal. M-O. Payment due within 7 days after the auction ends. Thank you for your time ... moreand have a good day.
|
|
|
Troyke Cross Slide Rotary Table
Troyke Cross Slide Rotary Table Model: DMT- 18 Lot# 4188-5. Working Surface 15 x 15 in. Cross-slide Travel 13 x 13 in. Indexing Accuracy on Rotary Table 30 Seconds. Cross-Slide Accuracy: Total Cross-Slide error is well within.001 in. total over the full length of travel. The DMT Models is a combination of a cross-slide and rotary table built into one rugged unit. Affording precision X,Y and rotary positioning. Features. A hardened and ground center locating hole which affords quick set-up as well as machine spindle location relative to the rotary table. Precision hardened and ground Acme cross feed screws are mounted in tapered roller bearings. Backlash is controlled by adjustable bronze feed screw nuts. Tapered gibs on cross slides. Working surface. Slides and dovetails are precision ground. Quick-Set satin chrome cross slide dials are graduated ... morein.001 in. and can be permanently locked if necessary. Cross-Slide scales are graduated in.100 in increments with adjustable pointers. Rotary Table is graduated in one degree increments. Satin Chrome Dial graduated in one minute increments. Satin Chrome Vernier offers fifteen second readings in either direction. Non-influencing locks hold table rigid. Quick method of disengaging worm from wormwheel. Precision ball thrust bearings on wormshaft. Stops on each cross-slide for use with gage blocks or length gages. Lifting bar included for both hand and crane usage. Dimensions L x W x H 20 x 17 x 9 1/8 in. Inv.876) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: a handling/loading charge of $100; and the actual shipping cost(to be determined based on your location) Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item i
|
|
|
MC Machinist Tool Vintage Drill Press Cross Slide Vise #75 + Prismatic Jaw
Comes with extra accessory-Prismatic Jaw plus instruction operation manual paper. Base is 4" x 8 1/2" 4 3/4" high, 1 1/4" throat depth. The vise is 3 1/4" wide. Shows very light wear. No corrosion. No rust. Shipped UPS with tracking& insurance. Use shipping calculator with your zip code for shipping costs. Thanks! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e167f4da0-0x101-
|
|
|
K O LEE CROSS SLIDE GRINDING GRIND FIXTURE BA 985
K O LEE CROSS SLIDE GRINDING GRIND FIXTURE BA 985. As pictured.
|
|
|
Schaublin 102n Lathe with Collets and Long X-Y Cross-Slide
Beautiful Schaublin 102n out of a Timex Watch facility. Machine comes with a long travel X-Y cross-slide-6" Tailstock chuck, and about 30-40-20mm collets. Machine has a leg operated on and off switch- these were an expensive option. Inspection in my Aberdeen, NJ shop is welcome call 917-974-7381. NJ and NJ residents and anyone picking up must add sales tax or provide a valid exemption. Please check my other items as I will be listing alot more Schaublin, Derbyshire, and Levin items over the next week.
|
|
|
CLAUSING Lathe Production Tooling Cross Slide 14" Vari Speed 1400, T Bolts Block
Used. CLAUSING"Gang" or"Production" Tooling Cross Slide with Tool Holder Block and 10"T" Bolts. Has been used on a 14" Vari Speed Clausing Lathe, Model 1400. May fit other models, I don't have any other fitment information. A chance to pick up a rare piece of production tooling for a Clausing Lathe! The cross slide is about 18" over all length x about 5-3/4" wide and about 2-7/16" thick. There are two"T" slots that are interreputed by a 2-13/16" wide area where access is given for the four"oiler buttons" and the mounting bolts for the crossfeed nut. The"T" slots measure about 9/16" at the top and about 1.015" at the bottom and are about 2.750" center to center. The dovetails are about 3-1/8" point to point" at the widest point ... moreof the dovetails. Without a gib. Tool holder block is about 3-3/4" x 4-7/8" overall and stands about 1-7/8" high. It has a single"T" slot running down the center and 4 mounting holes. The back side has a"key slot" with a key installed with 2 flat head screws. For secure positioning at 90 degrees on the cross slide slots. The"T" Bolts have a base that is about 1" square and 5/16" thick. The stud is threaded 1/2"13. The overall height of the"T" Bolts is about 1-7/16" 4 of the 1/2"13 nuts are a thinner"jam" type of nut and the other 4 are a little thicker. The hex surface and corners on the nuts are a little damaged from use. Please examine the pictures. Auction is for the"T" slotted cross slide with oiler buttons. Keyed tool holder block and(10) T" bolts with nuts only. There is no gib, gib adjusting screw or crossfeed nut assembly or any other loose parts. There is some light surface rust/discoloration from being in storage. The working surfaces have a few light nicks and dings but in good useable condition overall. The sliding surfaces may need to be cleaned up with a stone.
|
|
|
TOOL BLOCK & TOOL HOLDERS FOR LATHE CROSS SLIDE
aims TOOL BLOCK& TOOL HOLDERS FOR LATHE CROSS SLIDE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a used Tool Block and Tool Holders for Lathe Cross Slides in good condition. Specifications: T-Slot Size: 21/64" Mounting T Width: 3/4" Tool Holder Capacities: 9/16" Overall Dimensions of Block: 2-1/2" x 2-1/2" x 1-3/8" thick. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TOOL BLOCK& TOOL HOLDERS FOR LATHE CROSS SLIDE TOOL BLOCK& TOOL HOLDERS FOR LATHE CROSS SLIDE Reliable Tool ... moreInc. c 2011 | Powered by
|
|
|
Hardinge 3.5" Dovetail Cross Slide
Hardinge 3.5" dovetail slide. I also have a Hardinge lathe listed that this could go with. Slide is in great working condition.
|
|
|
South Bend 10L cross slide with gib and screw used but nice
Buy now before the internet sales TAX! Free ship 48 states only! Cross slide removed recently from a 10L South Bend lathe. The cross slide is in very well preserved condition. Little to no damge anywhere. It is complete with the gib. Gib screw fillester screws for the chip guard and the jamb nibs for the compound. I think it will be a while before I have one this nice again. It doesn't get any better than that. Except for the good price I have it listed at! Thanks for looking. Price is shipped to your door in the Heartland! Thanks; Craig 330.547.6300
|
|
|
Original Myford Super 7 Imperial Cross Slide Feed Screw & Nut & handle
Original Myford Super 7 Imperial Cross Slide Feed Screw Nut. Dial& Handle We accept payments by credit or debit cards direct on 01205 480 666 Monday to Friday 9am to 5 pm. Many more Myford parts to be listed soon. Be sure to add me to your! Check out my! Powered by Powered by a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13e46fa7387-0xf3-
|
|
|
Palmgren 3" 3 Inch Cross Slide Vise X Y Milling Vise
You are bidding on a very lighty used Palmgren Cross Slide Vise. The jaw width is 3" and the maximum opening is 3" I bought this but shortly after gained access to a vertical milling machine and this vise never saw more than a couple hours use. Feel free to contact me with any additional questions.
|
|
|
HARDINGE MODEL E DOUBLE ACTING CROSS SLIDE WITH RISER & D6 HOLDER
HARDINGE CROSS SLIDE MODEL E RISER& D6 MULTIPLE TOOL HOLDER INCLUDED Very good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. Buyer pays actual shipping cost. Thanks for looking!
|
|
|
Schaublin 102 W20 Precision Bench Lathe, Tailstock Cross Slide Chuck Headstock
Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 For sale Schaublin 102-80 W20 Precision Bench Lathe. Blue hammertone finish. In good working condition, no play in the headstock, tailstock or quill or cross slide, back lash on the cross and compound is only 0.003mm, Tailstock back lash is almost non existent about 0.0005mm. Comes with a 4 jaw scroll chuck. No motor. Would prefer to sell it as one piece for $1250. Willing to part it out, but only if can line up buyers for all of the parts at once. Parts break down: Headstock- $150(no draw bar) Bed- $100(pick up only. No shipping) Back plate + 4 Jaw Scroll Chuck- $300 Cross/ Compound Slide + Squaring block- $500 Tailstock(MT2) $500. It's too heavy to ship as a unit so I would prefer local pick up or delivery is a possibility within 300- $500 km radius- for extra fee. ... moreI'm in Toronto. As for parts shipment. I have no idea on the costs, I do not profit from shipping, so I will work with the buyer to find a good balance between safe packaging and cheap shipping cost. All sales are final no returns.
|
|
|
Atlas Milling Machine Cross Slide M1-5
Atlas Milling Machine Cross Slide M1-5 Includes oilers. S&H within the contiguous US states-$7.00 Sorry. No International Shipping BuyItNow Check out my other items! PayPal only please. If the item is not as described. Or it arrives in an inoperable condition, I will refund your money, your shipping, and I will pay for the return shipping. If it is to be returned for any other reason, I will refund the price of the machine and 1/2 the original shipping cost. If you are buying multiple items. Please wait untill I have invoiced you before you pay so I can try to combine your items in order to save you money on shipping.
|
|
|
Compound cross slide for small metal lathe(6"?) with 4 position turret tool hold
Barely used and in good working order. Compound cross slide with 4 position turret tool holder for small metal working lathe. Not sure what size lathe this came off of. But would probably be adaptable for 6-11" metal lathes and with a min.starting bid of.99 you can get it for cheap.
|
|
|
SOUTH BEND LATHE CROSS SLIDE STOP
LOTS OF AUCTIONS ONLINE NOW! Brand E Packaging E Condition E Quantity E Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I am not sure what size SB lathe this attachment is from. The inside dovetail is 2 3/4" in the closed position. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist ... moreand woodworker.
|
|
|
Atlas Craftsman metal lathe saddle cross slide set up for production
Atlas Craftsman metal lathe saddle cross slide set up for production.works freely.do not see any damage or defects Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item ... moreafter it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, please contact me if you have not received your item within 30 days. Please do not ask me to mark items with a lower value or mar
|
|
|
Vintage Atlas Craftsman Cross Slide Milling Drilling Table / lathe boring table
This is the Atlas X/Y table for use on a drill press. Also sold through Sears and branded as Craftsman. This is not some cheap import x/y table; this is a quality piece of equipment that will allow you to position your work on the drill press to the thousandths of an inch. Works with any drill press that has slots in the table. Such as Atlas, Craftsman, South Bend, Delta, Clausing, Rockwell, Walker Turner or others. It is used and in very good condition. Althought it could use a cleaning. The top is slightly pitted, but is flat and has no chips or gouges except one minor ding on the edge of a t-slot(see picture) The height to the top of the flat surface is 4-3/4" These were made from Atlas lathe parts. So many of the parts are interchangeable with Atlas lathes. The table top is 7" square and has four t-slots. The table top can be ... moreused as a boring table on a 12" or 10" Atlas/ Craftsman lathe. The lower feed travels more than 3" While the upper one travels 4-1/2" that is the travel if you keep the entire slide in contact with the base- you can get more travel if you overhang) The base is 6"x7-1/4" and has 4 long slots for 3/8" bolts or mounting to your drill press table. Both screws are in excellent condition. With smooth travel through the full range of motion. Backlash is about 8 thousandths on each. The handles are in good shape. The graduations on both dials and on the base are in good condition. But the dials need to be cleaned up. These sold for $37.50 in 1952! I pulled the entire unit apart. Cleaned it, oiled all sliding surfaces with Vactra, reassembled and adjusted it. Shipping will be by large flat rate USPS box. Shipping cost includes additional packing materials and labor. Note that the handles will be removed for shipping in order to prevent breaking them. The Fine Print Note that any terms and conditions specified above. Such as local pickup only, supercede conditions in the"fine print" Bidding When you bid on an item. Your bid is your contract. Y
|
|
|
Troyke Precision Rotary Cross Slide Table
Surplus to our needs. 15x15 Table 13x13 Travel.007 Backlash X&Y Axis 4min 30sec Backlash Rotary This table is lightly used and has no markings on the surface except for a slight staining. Preview by appointment only Customer to pay shipping charges Any questions please contact us at Info@chukarpts.com
|
|
|
ATLAS 618 CRAFTSMAN 6" LATHE CROSS SLIDE STOP
LOTS OF AUCTIONS ONLINE NOW! Brand Atlas Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
VINTAGE MINI LATHE CROSS SLIDE WATCHMAKER, JEWELER, GUNSMITH
BENCH MOUNT VINTAGE MINI LATHE WATCHMAKER. JEWELER, GUNSMITH, HOBBYIST GOOD USED SOLD AS IS NO RETURNS WE TRY TO DESCRIBE ALL ITEMS AS ACCURATELY AS POSSIBLE. ALL ITEMS ARE SOLD AS USED. AS IS CONDITION, UNLESS OTHERWISE STATED. PLEASE LOOK AT ALL PHOTO'S BEFORE YOU BID. CONTACT WITH ANY QUESTIONS. THANK YOU
|
|
|
T SLOT CROSS SLIDE TABLE mill milling machine work holder tool 5 1/2" x 12 1/4"
used cross slide table mfg not marked t slotted table is approx 5 1/2" wide x 12 1/4" long please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL SOUTH BEND 9" 10K LATHE CROSS SLIDE THREAD THREADING STOP
Description: Here's a real nice 9" and 10K South Bend Metal Lathe Cross Slide Thread or Threading Stop Attachment/ Accessory. The bottom of the V is 1 5/8" when it's closed as pictured. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for ... moreshipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
|
|
|
4" Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp Machine Heavy Duty
A fully adjustable heavy duty 4" Cross Slide Vise. Turn your drill press into a milling machine. This cross slide drill press vise features: Heavy duty construction. Jaw width: 4" Maximum jaw opening: 3 1/2" Vise travel: 5 1/2" Vise and cross slide have adjustable shims for fine adjustment, Base size: 9" x 5" Overall unit size 11" x 11" x 6 1/4" Precision threaded clamping and cross slide screws, Cross slides have removable adjusting crank handles
|
|
|
Compound Rest Cross Slide Base-- 7" Sears Craftsman Metal Lathe Model #109-20630
This auction is for the base for the tool rest or holder as pictured It is only for exactly what is pictured-I'm a woodworker not an metal worker so I don't know the exact terminology. It is from a Vintage model 109-20630 Sears Craftsman 7" Metal Lathe. Overall a bit over 8" Long. Has some wear but good working condition. Local Pick-up available. I will combine shipping on multiple purchases when practical.
|
|
|
Antique Star Lathe Cross Slide w/ Lathe Assembly
For Sale: Lathe Cross Slide. This assembly was taken from an antique Star lathe All parts are in working condition and work well and easy. Listed as local pickup only. But will help buyer set up shipping. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up ... moreby the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. IRV5-MG
|
|
|
K.O. LEE RADIUS CROSS SLIDE 5C GRINDING FIXTURE BA-986 / B942
K.O. LEE RADIUS CROSS SLIDE 5C GRINDING FIXTURE Model BA-986/ B942 Condition: Good(1 Handle is Cracked) Questions? call Metro Machine& Tool 732-650-0666
|
|
|
Troyke Cross Slide Rotary Table Model DTM-12 With Manual
Good condition
|
|
|
Delta rockwell milwaukee wood lathe cross slide attachment- parts
Delta Rockwell Milwaukee cross slide parts this is just the upper section. Hard to find. This is an early cross slide. Please ask any and all questions before bidding. Sold as is. Will be listing my extra Delta. South bend, etc. parts and tooling in the next few weeks. Pay pal only. I do combine shipping. Shipping is generally to US only- however i have shipped to canada before but you must ask for shipping cost BEFORE bidding so you don't get shocked. I expect payment within 3 days or item will be relisted
|
|
|
DELTA CROSS SLIDE VISE $20 SHIPPING USA
DELTA CROSS SLIDE VISE $20.00 SHIPPING U.S.A.
|
|
|
3" SUPER compound vise cross slide vise DRILL PRESS machinist tools GS - S107
UP FOR BID IS A 3" SUPER COMPOUND VISE GS- S107 SERIES IN GREAT USED CONDITION HAS BEEN SITTING FOR A LONG TIME 20+ YEARS JUST DUSTY. JAW PLATES ARE IN GREAT SHAPE COMES WITH MANUAL. VISE IS 5" TALL AND 6" WIDE THANKS FOR LOOKING
|
|
|
OOG Brown & Sharp Front Cross Slide Rack and Dial
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for sale is a OOG Brown& Sharp Front Cross Slide rack and Dial. The Rack and Dial is in good condition.The Rack and Dial came from a running machine.Please ask any questions that you have before bidding. Please check out my other auctions. I will be listing more Jet Ski Parts, B& S Tooling, slot cars, parts and other items in the next few months.Thanks for looking and happy bidding. I will combine shipping. Please wait for an invoice if you purchase multiple items. All items I list are as described as best that I can. Packed carefully and shipped quickly. Ship costs are calculated using actual postage. Inquiries are answered promptly. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e6dd1697f-0x102-
|
|
|
Lot of 18 OOG Browne & Sharpe Cross Slide Cams # 2
This is a Lot of 18 OOG Browne& Sharpe Cross Slide Cams. The cams are in good condition. Please feel free to ask any questions before you buy. Please look at my other auctions. I will be listing a lot of screw machine parts and accessories and other items in the next few months. FEEDBACK- All items I list are as described. Packed carefully and shipped quickly. Ship costs are calculated using actual postage. Inquiries are answered promptly. Thank you for your time and consideration.Please take into account the shipping time given is just an estimate.I have no control over the post office. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional ... morecosts will be prior to bidding or buying.
|
|
|
Cam,Brown & Sharp, Cross Slide Cams,OOG Lot of 18 #2 *
Up for Auction is a lot of 18 OOG Brown& Sharp Cross Slide Cams.The Cams are in good condition. Please feel free to ask any questions before you buy. Please look at my other auctions. I will be listing a lot of screw machine parts and accessories and other items in the next few months. FEEDBACK- All items I list are as described. Packed carefully and shipped quickly. Ship costs are calculated using actual postage. Inquiries are answered promptly. Thank you for your time and consideration.Please take into account the shipping time given is just an estimate.I have no control over the post office.
|
|
|
Brown & Sharp Cross Slide Cams Screwmachine OOG 1/2" Lot of 13
Up for Auction is a lot of 13 OOG Brown& Sharp Cross Slide Cams.The Cams are in good condition. Please feel free to ask any questions before you buy. Please look at my other auctions. I will be listing a lot of screw machine parts and accessories and other items in the next few months. FEEDBACK- All items I list are as described. Packed carefully and shipped quickly. Ship costs are calculated using actual postage. Inquiries are answered promptly. Thank you for your time and consideration.Please take into account the shipping time given is just an estimate.I have no control over the post office.
|
|
|
HARDINGE VBS SECOND OPERATION LATHE with DOVETAIL BED & DOUBLE TOOL CROSS-SLIDE
HARDINGE VBS SECOND OPERATION LATHE- HARDINGE VBS SECOND OPERATION LATHE INVENTORY# 0784 MODEL: VBS S/N: V59-3731-3 SPECIFICATIONS: SPINDLE CAPACITY: ROUND HARDINGE 21SC COLLETS: 63/64" HEXAGON HARDINGE 21SC COLLETS: 27/32" SQUARE HARDINGE 21SC COLLETS: 11/16" STEP CHUCKS: 1 1/16" 6" JAW CHUCKS: 5" LENGTH OF BED: 36" SWING OVER BED: 9" TRAVEL OF TURRET SLIDE: 4" SPINDLE SPEED RANGE: 230 TO 3.500 RPM(8) SPEEDS TRAVEL OF DOUBLE TOOL CROSS SLIDE: 3 3/4" MOTOR: 1 HP/ 3 PH/ 220 V APPROXIMATE WEIGHT: 1.000 LBS EQUIPMENT INCLUDED: DOVETAIL BED DOUBLE TOOL CROSS SLIDE LEVER OPERATED COLLET CLOSER COOLANT SYSTEM GOOD CONDITION! SHOP MORE LATHES HERE CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm ... moreEST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guaran
|
|
|
WWI BRITISH ARMY RED CROSS TROOPS IN CAMP LANTERN SLIDE c1915
WWI BRITISH ARMY RED CROSS TROOPS IN CAMP LANTERN SLIDE c1915 ORIGINAL VINTAGE GLASS MAGIC LANTERN SLIDES 3 1/2 INCHES BY 3 1/2 INCHES. PLEASE CLICK ON IMAGE IN THE LISTING HALF WAY DOWN PAGE FOR SUPER SIZE AND DETAIL ~ PLEASE CHECK OUT MY OTHER MILITARY MAGIC LANTERN SLIDES TAKEN WITH A DIGITAL CAMERA WILL BE SHARPER AND MORE CLEAR WHEN SCANNED CONDITION.IMAGE. GOOD SOME LIGHT AGE RELATED MARKS SOME FOXING TO BORDER I WILL ALWAYS COMBINE SHIPPING! WITH THESE SLIDES THE MORE YOU BUY THE CHEAPER IT BECOMES TO SHIP! PLEASE VIEW SCAN WITH SUPERSIZE BY CLICK IMAGE IN LISTING i always sell vintage items not modern copies or scans or repro cards SOMETIMES THE CARD MAY LOOKED TRIMMED THIS IS MY SCANNER NOT THE CARD I WILL TELL ALL DETAILS IN CONDITION IF ANY DAMAGE Payment can be made with paypal. bankers draft. Cheque or by postal order items will ... morenot be dispatched until funds have cleared the banking process. World wide shipping available please contact me for individual shipping rates as this varies from country to country. Buyers please wait for final invoice before paying Thank you All items are listed honestly and every effort is made to show item clearly in the photo's and description. Returns Policy. Returns are accepted. The buyer pays for the cost of return postage. All the items i sell are original Vintage items. No copies,Photocopies or modern reproductions! Please feel free to contact me using ebay questions. i will endeavor to answer question as quickly as posible. you can also call me on 07733231970 uk office hours only
|
|
|
VINTAGE ATLAS MILLING CROSS SLIDE DRILL PRESS TABLE JIG FIXTURE MACHINIST
DESCRIPTION: PICK UP AVAILABLE. USED. ATLAS CROSS SLIDE TABLE. IT MOVES BACK AND FORTH. NO CRACKS OR REPAIRS. THE TABLE TOP IS 7" X 7" THE TABLE WILL BE BOLTED TO A BOARD AND PACKAGED WITH CARE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL ... moreBE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERS
|
|
|
Leitz Cross Slide Stage Digital Micrometer TP 300 Bench Measuring Projector
This is a Leitz y-axis cross slide stage with digital micrometer. Intended for use with LEITZ TP 300 Bench Measuring Projector. Note: a digital readout to display digital micrometer readings is not included. Linear Travel 50 mm, Mounting(Top) three M4X0.7 holes Mounting(Base) three M6X1.0 holes Stage Length 155 mm, Stage Width 185 mm, Linear Resolution 0.0005 mm, Inspection by a Hofstra Group technician allows us to guarantee this hardware to perform to your satisfaction. This item carries a 7-day unconditional right of return and a 90-day warranty. In the unlikely event that you need to return it. We will arrange and pay for return shipping in addition to refunding the purchase price and original shipping. Please review our for more information. gsrx_vers_486(GS 6.5.1(486)
|
|
|
Palmgren Dual Cross Slide Table 6" x 10" X Y Axis w/T-slots 36103 Positioning
Palmgren Dual Cross Slide Table This table has been gently used in a home shop. It is in excellent condition. I cleaned and lubed it. This retails for $550. SAVE $$$$$$$ and buy a good used one. Shipping only to the United States. Free shipping to the lower 48 states only. Insurance is included with shipping! All items are described in as much detail and condition as possible. Most items I sell are previously owned and/or used and may show signs of wear. This item is sold AS IS. I cannot offer any warranty. If you have any questions or need additional information. Please email me BEFORE placing your bid. Remember, there are NO RETURNS OR REFUNDS for buyers remorse. Shipping cost is calculated using zip codes. The actual shipping weight will be based on item. Box, and packing materials. Please use the calculator provided in this auction by ... moreeBay to calculate your shipping cost. S/H, insurance, and signature confirmation are required and are reflected in the calculated price. Items are packed to the requirements of the shipper. If an item is damaged or lost in shipment. Please contact me and I will help file a claim. This can take up to 6 weeks. The refund will be for the sale cost of the item less shipping. I do not issue any type of refund until the claim is settled.
|
|
|
Emco Compact 5 PC CNC Lathe Cross Slide Ballscrew X Axis Ball Screw
Emco Compact 5 PC CNC Cross Slide Ballscrew Assembly. Complete Assembly. Works Perfectly, Used. Condition: The ballscrew assembly is in perfect mechanical condition albeit some oil/ oxidation stains from sitting around; this is cosmetic only. The assembly is complete and comes with the 2 short screws for attachment to the cross slide table and two longer screws for attachment to the cross slide base. Sold as shown in this photo: Ready to install. Patina on timing gear is cosmetic only and will not affect the precision of this item. Shipping: Charges shown are flat rate to US or Canada and EU. I combine shipping when possible. I ship from Ann Arbor. Michigan 48103. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds to clear. Returns: Policy Updated 2012 I offer a ... more30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing, I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and or replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
|
|
|
SHELDON 10" LATHE CROSS SLIDE & MATCHING GIB PLATE
The following parts came from an early SHELDON lathe with a 10" swing. The serial# was L-301(circa 1938) This lathe was in the middle of a restoration and was NOT parted out due to wear& tear! THIS AUCTION IS FOR THE FOLLOWING PARTS: This is the cross slide& gib plate. It's in good shape except for a chunk missing from the corner. this did not seem to effect it's performance on the lathe(see pictures) I'm including FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME ... moreDAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up i
|
|
|
palmgren rotary cross slide index table 10"
This is used but is in complete working order. There is a slight drill mark in the table but only. I did this by being in a hurry. This cost me app. $800.00. I am getting out of the business. 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13e9a9941f5-0xf5-
|
|
|
ATLAS CRAFTSMAN 10" 12" LATHE CROSS SLIDE STOP
SHOP MADE ATLAS/ CRAFTSMAN 10" or 12" LATHE CROSS SLIDE STOP 3 7/8 X 1 9/1 6 X 7/8" THICK ALUMINUM PLENTY OF ROOM TO CUSTOMISE WITH DEPTH STOP SCREW IF DESIRED I always combine shipping when possible-check out my other auctions
|
|
|
HARDINGE MODEL DV59 LATHE CROSS SLIDE TAILSTOCK 5C collet closer machine
The title is not a complete description so please read the ad description. please scroll down and view all the photos. Bidders please read the ad. Welcome to an listing by Best Bay Machinery sales. We specialize in offering high quality new and used metalworking equipment for machining and fabricating at affordable prices. This listing is for the following HARDINGE MODEL DV59 LATHE 5 C collet closer Hardinge cross slide TAILSTOCK thru hole Description, HARDINGE MODLE DV59 LATHE W/ TAILSTOCK S/N 220 V 3 PHASE WT IS 2 2 5 0# specifications from manufacturer Subject to verification only: 230V 3P, 1HP Motor, Capacity: 1-1/16" round 5C collets, Swing over bed: 9" Distance between centers: 17" Length of bed: 36" 230- 3500 RPM variable, 67" x 30" x 57" high, 1250 lbs. With: 14N Jacobs chuck, 5C lever draw bar, ... moreCompound X-Y slide, assorted 5C collets 15 50 LBS on a pallet Item ships from Chicago 60436 Questions email or call Bob 773-392-5055 Please check our store for the best deals on machinery and tooling at our store! Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or cond
|
|
|
South Bend Lathe Heavy 10 L Cross-Slide, Gib, Chip Shield
The cross feed screw and nut are not included. Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime
|
|
|
South Bend Lathe Heavy 10" Cross Slide for Taper Attatchment
This casting is in new condition but is listed as used. It has no cracks or welds and is machined and ready for paint and installation. It is for use with the heavy 10" machine with a taper attatchment. There are no crash marks. Ships in a medium flat rate box. This would be perfect for a person fixing up a machine that has had damage from chuck crashes! Please see my other items.
|
|
|
VINTAGE 18KT WHITE GOLD DIAMOND CROSS PENDANT SLIDE NECKLACE NOT SCRAP 1.80CTS.
STUNNING VINTAGE 1 8 KT WHITE GOLD DIAMOND CROSS PENDANT SLIDE CHARM. THIS BEAUTIFUL PIECE CONTAINS APPROXIMATELY 1. 80 CTS. IN DIAMONDS. DIAMONDS ARE G- H IN COLOR AND VS- SI IN CLARITY. CROSS WEIGHS 2.3 GRAMS. TH IS CROSS IS 1 INCH IN LENGTH AND IN BETWEEN A 1/2 AND 3/4 OF A N INCH IN WIDTH. THIS IS A PAYPAL AUCTION AND PAYMENT IS DUE IMMEDIATELY AFTER AUCTIONS ENDING. THANK YOU FOR LOOKING AND GOOD LUCK BIDDING. CROSS WILL COME IN A GIFT BOX. IF YOU ARE A RESIDENT OF NEW YORK SALES TAX WILL BE APPLIED. PLEASE VIEW OUR OTHER AUCTIONS. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
|
|
|
Vintage Onyx Filigree Scroll Sterling Silver 925 Cross Slide Pendant
7 Days for a Combined Shipping Rate! Description Weight 6.7g Time Period Vintage Hallmark No Marks-Tested Sterling 925 Type Cross Slide Pendant Metal Sterling Silver 925 Gemstone Onyx 1 Low Fee for Combined Shipping Please WAIT to pay for all items together. DO NOT pay for one item and then ask for combined shipping. If you pay for an item IT WILL SHIP OUT. We do not have the ability to hold items once they are paid for. Ignore auto invoice reminders to pay if you are still shopping(beginning with your first win up to 7 days only) Please message us within eBay Messenger not via e-mail before you pay to combine shipping or you will FORFEIT the combined shipping rate! We only ship to the shipping address you give us at checkout. It can not be modified later. Please do not ask us to change the address. 24 Hours of Completed Payment $2.99 International ... moreShipping. $1.99 Domestic Shipping. Texas Only: Sales Tax 8.25% 14 days! No questions asked!
|
|
|
Hardinge Cross Slide With Tool Holders
Hardinge double cross slide with tool holders for DV59 lathe. Nice condition in excellent working order.
|
|
|
c1924 Mexico Wayside Cross Anti Catholosism Color Photo Lantern Slide & Script
This is a photographic glass magic lantern slide. Beautifully colored, labeled on the script, Wayside Cross. This is slide#13 of a set titled, South of the Rio Grande. The set of slides once belonged to"The Board of Foreign Missions of Presbyterian Church, 156 Fifth Avenue, New York City. The slides(which originally came with a script book) could be rented by a church to show to their congregation to support the"Missionary Effort. Of course, a collection was taken after the slide show to support the work of the missionaries. The original script page for this slide is included. I reads in part, The Indians.were baptized in a wholesale manner by the Roman Catholic priests.Wayside crosses and shrines abound everywhere and are worshipped by the superstitious natives. Magic Lantern Slides are one of the best untapped resources for antique ... morephotographs there are. Slides were usually discarded after a relatively short period of use so are difficult to find. Slide is 3 1/4" x 4" is in very good condition, and can be viewed by projecting, holding it to the light, or placing it on a light box. This slide can be made into a photograph or poster. If you would like information on having that done AFTER you purchase the view, please let me know. You can learn more about magic lanterns and slides by going to www.magiclanternsociety.org. I offer a reduced postage amount for multiple items IF you email for the cost. Please remember to do this otherwise you will overpay. Thanks for your business, Bob Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Cross Slide Hardinge South Bend Atlas Craftsman Jewlers Lathe
Here is a Used Vintage Lathe Cross Slide. I don't Know what Type or Size of Lathe it will work on. Please look at all the Pictures and ask your Questions before Bidding. This is being Sold as Is as Found. LIST OF TERMS: All items I offer are old. Antique, collectible, used and sometimes abused and not new unless specified in the description. So please keep this in mind and have fair expectations. I do my best to describe items well. I do my best to take good pictures.That said.If you're not sure about something please asks Questions(BEFORE) bidding. All sales are final. I will be more than happy to answer any questions to the best of my ability or send you more pictures of an item. I offer all items as is. In there found condition. I always leave cleaning and(repairs) if needed to the new owners. ALL ITEMS ARE SOLD. AS IS" NO ... moreWARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 3 DAYS FROM THE END OF THE LISTING. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED PAYPAL SHIPPING ADDRESS. NO DROP SHIPPING. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* INTERNATIONAL BIDDERS! YOU ARE LIABLE FOR ALL CUSTOMS TAXES AND PAPERWORK. BECAUSE THE UNITED STATES POST OFFICE DOES NOT OFFER COVERAGE FOR OVERSEAS 1st CLASS MAIL. SHIPPING ON LOST, DAMAGED OR STOLEN ITEMS SO IT WILL BE THE INTERNATIONAL BUYERS RESPONSIBILITY ON ANY AND ALL 1ST CLASS SHIPPING. INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/b
|
|
|
VTG ATLAS CRAFTSMAN LATHE MILLING ATTACHMENT COMPOUND CROSS SLIDE TABLE!
YOU ARE BIDDING ON A NICE VINTAGE ATLAS CRAFTSMAN LATHE MILLING ATTACHMENT C ROSS SLIDE ATTACHMENT! THE PART IS NUMBERED 562 OR 50 2? TH E TOOL HOLDER IS 3/4" AND ALL THE PARTS MOVE FREE! TH E ITEM IS OLD AND IS STILL IN GOOD CONDITION BUT HAS SOME RUST! THE PICTURES ARE OF THE ACTUAL ITEM! ANY QUESTIONS FEEL FREE TO ASK! SHIPPING IS $15.49! THANKS FOR LOOKING!
|
|
 |