|
1X3/4 Roughing End Mill
Roughing End Mills | Mill Diameter(Inch) 1 | Material: High Speed Steel | Length of Cut(Inch) 2 | Finish/Coating: TiCN | Overall Length(Inch) 4-1/2 | End Type: Square End. Mill Diameter(Inch) 1, Material, High Speed Steel, Length of Cut(Inch) 2, Finish/Coating, TiCN, Overall Length(Inch) 4-1/2, End Type, Square End, Number of Flutes, 3, Centercutting(Yes/No) Yes, Shank Diameter(Inch) 1, Helix Angle( 37.00, Extended Reach(Yes/No) No, Single or Double End, Single, Cutting Direction, Right Hand, Flute Direction, Right Hand, Mill Diameter Tolerance(Decimal Inch) +0.001/0.000, Shank Diameter Tolerance(Decimal Inch) 0.0001/0.0005, Overall Length Tolerance(Decimal Inch) +0.062/0.000,
|
|
|
Farm King roller mill, feed grinder pto drive
Model 100 capable of 100 bushels/ hour. Could be converted to electric. i have the manual also. The 2nd poto shows the optional magnet installed. shipping will be actual cost with delivery to a local terminal.
|
|
|
VALENITE CAT40 1-1/4" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4594
LOT# C4594 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA VALENITE CAT40 1-1/4" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
VALENITE CAT40 3/4" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4599
LOT# C4599 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA VALENITE CAT40 3/4" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
VALENITE CAT40 3/8" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4638
LOT# C4638 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA VALENITE CAT40 3/8" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
MADE IN USA CAT40 1" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4574
LOT# C4574 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA CAT40 1" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
VALENITE CAT40 1" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4575
LOT# C4575 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA VALENITE CAT40 1" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
VALENITE CAT40 1" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4578
LOT# C4578 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA VALENITE CAT40 1" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR! a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13feff197f0-0xfe-
|
|
|
MADE IN USA CAT40 3/16" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4590
LOT# C4590 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA CAT40 3/16" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
SANDVIK CAT40 3/8" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4591
LOT# C4591 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA SANDVIK CAT40 3/8" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
MADE IN USA CAT40 1-1/4" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4593
LOT# C4593 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA CAT40 1-1/4" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
VALENITE CAT40 3/4" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4596
LOT# C4596 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA VALENITE CAT40 3/4" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
VALENITE CAT40 3/4" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4598
LOT# C4598 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA VALENITE CAT40 3/4" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
VALENITE CAT40 3/4" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4600
LOT# C4600 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA VALENITE CAT40 3/4" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
SANDVIK CAT40 1/2" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4602
LOT# C4602 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA SANDVIK CAT40 1/2" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
SANDVIK CAT40 3/8" DIA END MILL HOLDER GOOD CONDITION CAT 40 LOT C4604
LOT# C4604 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA SANDVIK CAT40 3/8" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
solid carbide 1 1/4 resharpened ball end mill.3 lbs.
resharpened. 30.00 scrap when done using.measures about 1.200.will combine shipping.
|
|
|
EAGLE ROCK 5C VERTICAL HORIZONTAL COLLET CHUCK FIXTURE MILL MILLING TOOL
WarnerSales Warner See all my listings: WarnerSales EAGLE ROCK 5C VERTICAL HORIZONTAL COLLET CHUCK FIXTURE MILL MILLING TOOL Offered is a USED Eagle Rock Vertical/Horizontal Collet Fixture. Description: Fixture for 5C Collet. This item is in good USED working condition. We have a number of these available so the photograph is representative of the item you will receive. FREE SHIPPING TO THE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as we can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. Payment must be made within 5 days of purchase commitment. ... moreIf payment is not received within five days. An unpaid item case will be filed with eBay in order to recover our listing fees. Sales Tax: We are required to charge 6% sales tax for items sold to Iowa residents. Shipping: We provide free shipping to the U.S. lower 48 states ONLY. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. For Alaska/Hawaii/other U.S. territories and international orders. Buyer pays the additional shipping. Please email us through the"ask a question" link at the bottom of the page for shipping costs before bidding. All customs forms will be filled out accurately. International customers are responsible for all applicable import duties and fees. Local Pickup: Johnston. Iowa) Pickups are welcome. You may pay cash at that time. Please contact us to make arrangements. Return Policy: You may return an item(other than an as is item) within 14 days of delivery for a full refund of the purchase price following our receipt of the returned item in the same condition it was in when sold. We will pay return shipping costs if
|
|
|
NMTB 50 TAPER - 1.575" STUB MILL ARBOR milling machine tool holder SCULLY JONES
good used nmtb 50 taper- 1.575" stub mill arbor Scully Jones USA 3019 no drive keys 1" drawbar thread FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 50 TAPER - 1 1/16" FACE MILL ARBOR milling machine tool holder SCULLY JONES
good used nmtb 50 taper- 1 1/16" face mill arbor Scully Jones USA 3017 no drive keys 1" drawbar thread FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 50 TAPER - 1 1/4" STUB MILL ARBOR milling machine tool holder SCULLY JONES
good used nmtb 50 taper- 1 1/4" stub mill arbor Scully Jones USA 30184 no drive keys or bolt 1" drawbar thread FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 50 TAPER - 1" FACE MILL ARBOR milling machine holder DETAIL TOOL & MACH
good used nmtb 50 taper- 1" face mill arbor Detail Tool& Mach 1326612-H-14 missing 1 drive key 1" drawbar thread FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 50 TAPER - 1 1/4" FACE MILL ARBOR milling machine tool holder POLAND
good used nmtb 50 taper- 1 1/4" face mill arbor Poland 904/32 1" drawbar thread FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 50 TAPER - BORING BAR head mill tool DEVLIEG MICROBORE USA GM50M-51
good used nmtb 50 taper- boring bar Devlieg Microbore USA GM50M-51 no cartridge- 1/2" dia x 8 1/4" long 1" drawbar thread FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VALENITE NMTB50 SHELL MILL / FACE MILL HOLDER NMTB 50 GOOD COND LOT C2712
SquareTrade © AP6.0 LOT# C2712 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA VALENITE NMTB50 SHELL MILL/ FACE MILL HOLDER WITH 2" PILOT YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE MORE NMTB 50 HOLDERS LISTED AND WILL BE LISTING MORE. GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! On Jun-12-13 at 16:16:05 PDT. Seller added the following information:
|
|
|
C 1910 INK BLOTTER LUMBER MILL COTTON PLANT ARKANSAS Southwestern Veneer Eastern
PLEASE READ BEFORE BUYING OR BIDDING! I sell ONLY ORIGINAL items and NOT ANY reproductions. This is an ADVERTISING INK BLOTTER. From SOUTHWESTERN VENEER COMPANY AND EASTERN ARKANSAS VENEER COMPANY, COTTON PLANT, ARKANSAS. Blotter is in excellent condition and has never been used. Approx. 4" X 9 1/2" in size! PAYPAL PAYMENT DUE WITHIN 1 DAY OF THIS PURCHASE! When you receive your item. PLEASE consider feed back(I will see it) and I will reciprocate feed back at that time. Texas residents: For an undelayed delivery, PLEASE include the 8.25% sales tax, OR furnish a photo copy of resale certificate, OR please sign the proper paperwork and send it with your payment. PLEASE view my other auctions and ebay store items for related ephemera, antique documents, and paper collectibles. THANK YOU VERY MUCH AND GOOD LUCK Y"ALL. Free shipping ... moreto continental U.S. Powered by
|
|
|
Regal Beloit Lot 3/4" End Mill Cutters
Lot of seven 3/4" shank end mill cutters Regal Beloit in good condition NEED A REBUILD? NEED A REPAIR? NEED ADVISE? NEED A MACHINE NOT LISTED PLEASE CALL: DAN’S MACHINE TOOL. INC. WITH ANY QUESTIONS…714) 666-1266 OVER 30 YRS OF REPAIR AND REBUILDING EXPERIENCE ON ALL METAL WORKING MACHINERY INCLUDING BUT NOT LIMITED TO ACRA. BRIDGEPORT, CINCINNATI, HARDINGE, LAGUN, LE BLOND, KENT. SCOTCHMAN DAN’S MACHINE TOOL. INC. SPECIALIZES IN REPAIR& REBUILD, NEW& USED TOOLING, SALES OF NEW AND PREOWNED MACHINES, MANY IN STOCK: MILLS, LATHES, GRINDERS, BANDSAWS, WE STRIVE TO PROVIDE OUTSTANDING CUSTOMER SERVICE. AS OUR CUSTOMERS ARE THE CORE OF OUR BUSINESS! IRONWORKERS…ALL UNDER POWER 1260 N. SUNSHINE WAY ANAHEIM. CA 92806 NEW PHONE# 714) 666-1266 FAX 714) 666-1269 SHIPPING: PLEASE SEE ITEM FOR PRICING FREIGHT: ANY ITEM WEIGHING OVER 149lbs ... moreSOLD AS IS: No warranty and unable to test CRATING SERVICES: We offer crating services on all freight items. Pricing for crating is different for each item Please call for details WE WILL GLADLY LOAD ANY FREIGHT ITEM ON YOUR TRUCK OR FREIGHT CARRIER FOR FREE! SALES TAX: ALL CALIFORNIA BUYERS MUST PAY 8% SALES TAX Posted with
|
|
|
Vintage 4 3/4" Old Mill, Route 2A, Westminster, Mass, Saucer
You are looking at a vintage saucer with picture on front and The Old Mill. Route 2A, Westminster, Mass. Arabia, Made in Finland. 4 3/4" dia with scallops on top rim, mint A nice addition to any collection or display. Bid with confidence. I do combine shipping on multiple purchases. Take a look at the other items I have for sale and thanks for looking
|
|
|
NICE ISCAR NO. F90AP-D2.00-.75M FACE MILL
ISCAR NO. F90AP-D2.00-75 FACE MILL Manufacture: Iscar Model No. F90AP-D2.000-75 Cutting Diameter: 2" Indexable Slots: 5 Arbor: 3/4"
|
|
|
1893 Columbian Exposition American Wind Mill Photograph Water Pumping Windmill
Here we have a professionally-matted vintage original print of the World's Wind-Mills exhibit that was erected for the 1893 Chicago World’s Fair. This ORIGINAL print was produced in 1893 by N.D. Thompson Publishing Co. of St. Louis. MO. as part of“A Portfolio of Photographic Views of the WORLD’S COLUMBIAN EXPOSITION. Measuring 8 ½” x 11” overall with a 7 1/2”x 9 ½” image size. This wonderful picture has at least 35 different windmills of all shapes, sizes and designs. The original documentation that accompanied the print is included and mounted on the back of the matting. Condition is OUSTANDING& ready to frame with no damage or discoloration. Please let me know if you have any questions. Take a look at my other auctions for more great vintage stuff and some other great things too! Thanks and Good Luck.
|
|
|
Hot Wheels 1993 #211 Twin Mill II Blue Card Yellow UHs Chrome w/Gray Base
All items listed are described at the best of my knowledge.You'll find above several detailed large size pictures of the actual model. Usethe provided detailed pictures to make your decision before bidding. Items arenot boxed unless mentioned above. If you have any questions please contact me. I will try to answer your questions within 24 hrs. NO RETURNS ACCEPTED. Allitems are sold AS IS. I have tried totake detailed pictures but some flaws may not be seen. I am not aware of any accessories with items. If you don’t see it in the picture I don’thave it. If you would like more detailedphotos. Please contact me. THANK YOU forlooking! Overseas buyers are responsible with duties. Import taxes and fees charged bytheir customs agencies. Please take these facts into consideration before youbid and purchase. Please contact me andI will unlock ... moreinternational shipping.
|
|
|
ONE 1-TROY OZ 24k GOLD CLAD $1 DOLLAR BILL-100 Mill ART BAR-Beautiful Spec Gift!
BID WITH CONFIDENCE ON AN AUCTION BY SUPER BIG GUY- PETE! 100% FEEDBACK! MAKES A GREAT GIFT IDEA FOR ANY SPECIAL OCCASION! FOR: 1) 1 TROY 0Z GOLD'CLAD' 24K.999 BAR Am. Dollar Bill w/President George Washington. Both Front& Back of the bars. Are a Proof-like Finish! BU) BRILLANT-UNCIRCULATED* THIS GROUP OF BARS. WERE RECENTLY BOUGHT FROM A SMALL MINTING COMPANY. THESE ART BARS HAVE BEEN MINTED FOR ONLY A SHORT TIME IN LIMITED PRODUCTION. THE BARS ARE OF THE HIGHEST QUALITY ART WORK SEEN AT THIS TIME! THESE WILL MAKE A GREAT GIFT AND INVEST- MENT. THE STARTING PRICE IS LOW FOR 24K.999 FINE GOLD CLAD- 100 MILL BAR- Gold Plated Bar) Bar Size: Length: 43.5 mm/27.5 mm* Thickness: 1.98 mm* This'Beautiful' 1 Troy 0z Gold Bar is made of 100 Mill 24K.999 Fine Gold Clad. Gold Plated over a.999 Fine Copper Bar. NOTE: Each'BEAUTIFUL' ... moreBar will come in a Air-tite Acrylic Bar Holder for Protection! EXTRA'S INCLUDE: +'FELT COLORED PROTECTIVE JEWELRY BAG WITH PULL-STRINGS' AND + A SPECIAL MONETARY GAG GIFT' SHIPPING: FIRST CLASS MAIL WITH INSURANCE* PayPal is my preferred payment- and is due' after' the auction closes- Thank You! Thank you for looking and bidding/buying one of my auctions& GOOD LUCK! If you have any questions. Please email me thru the Ebay message system- thank you. SORRY- I ONLY SHIP WITHIN THE 50 U.S. STATES!
|
|
|
Retsch ZM 1000 ZM1000 Centrifugal Ultra Lab Mill/Grinder w/ 3 Rotors & Extra Lid
This auction is for a Retsch ZM 1000 Centrifugal Mill. Setup includes: Retsch ZM 1000 Centrifugal Mill, 3) Retsch Rotors, 1) 6-Tooth rotor, 1) 12-Tooth rotor, 1) 24-Tooth Rotor, Extra lid, Power Cord, As you can see from the pictures. This unit is in very nice, clean condition with very little wear. Unit has been fully tested and operates flawlessly. You won't find a better example with this many accessories at this price! Don't miss out! Feel free to email me with any questions. Thanks for looking and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MONARCH LATHE TAILSTOCK HANDLE ASSEMBLY PARTS MILL DRILL SAW GRINDER MACHINIST
THIS IS THE BRACKET TO HOLD THE CRANK FOR MOVING THE TAILSTOCK ON LARGER MONARCH LATHES. THERE ARE HOLES DRILLED IN THE TAILSTOCKTO BOLT IT ON. I DO NOT HAVE THE HANDLE FOR IT. WHAT YOU SEE IS WHAT YOU GET.
|
|
|
MADE IN USA CAT50 1" DIA END MILL HOLDER GOOD CONDITION CAT 50 LOT C3005
LOT# C3005 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A CAT50 MADE IN USA 1" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13ff44cc64a-0xff-
|
|
|
Ingersoll 4 inch Right Hand Face Mill 6K2A04R01 New Number 8K2A-04R02 12 Inserts
Description: ITEM MUST SELL Barely Used 4 inch Ingersoll Face Mill. New Cutter Number 8K2A-04R02 Old Cutter Number 6K2A04R01 Right Hand Rotation Medium Cutter Pitch 12 Inserts 4.00 inch Nominal Diameter(D1) 2.375 inch Height(H) 1.50 inch Bore Diameter(D2) 0.620 Keyway Dimension 4.24° Lead Angle Check out my other items! If you have questions or have an offer please email me. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
U.S.A!! A.B. TOOLS INDEXABLE FACE MILL W/ 1" SHANK & 3 INSERTS - 1.900" DIA.
aims U.S.A! A.B. TOOLS INDEXABLE FACE MILL W/ 1" SHANK& 3 INSERTS- 1.900" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by A.B. Tools. This is an Indexable Face Mill& 3 Inserts in good condition. Specifications: Cutting Diameter: 1.900" Indexable Stations/ Flutes: 3. Shank: 1" Overall Length: 4-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! A.B. TOOLS INDEXABLE FACE MILL W/ 1" SHANK& 3 INSERTS- 1.900" DIA. U.S.A! A.B. TOOLS INDEXABLE FACE MILL ... moreW/ 1" SHANK& 3 INSERTS- 1.900" DIA. Reliable Tool Inc. c 2011 | Powered by
|
|
|
INDEXABLE FACE MILL W/ R8 SHANK & 4 INSERTS - 3.000" DIA.
aims INDEXABLE FACE MILL W/ R8 SHANK& 4 INSERTS- 3.000" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an Indexable Face Mill& 4 Inserts in good condition. Specifications: Cutting Diameter: 3.000" Indexable Stations/ Flutes: 4. Shank: R8" Overall Length: 5" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. INDEXABLE FACE MILL W/ R8 SHANK& 4 INSERTS- 3.000" DIA. Reliable Tool Inc. c 2011 | Powered by
|
|
|
INDEXABLE FACE MILL W/ 1-1/2" ARBOR & 8 INSERTS - 4-1/4" DIA.
aims INDEXABLE FACE MILL W/ 1-1/2" ARBOR& 8 INSERTS- 4-1/4" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an Indexable Face Mill& 8 Inserts in good condition. Specifications: Cutting Diameter: 4-1/4" Indexable Stations: 8. Arbor Hole: 1-1/2" Cross Slot: 648" Overall Thickness: 1-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. INDEXABLE FACE MILL W/ 1-1/2" ARBOR& 8 INSERTS- 4-1/4" DIA. INDEXABLE FACE MILL W/ 1-1/2" ARBOR& 8 INSERTS- 4-1/4" DIA. ... moreReliable Tool Inc. c 2011 | Powered by
|
|
|
Stott Haslingden Textile Mill Steam Engines 1879 Advert
Stott Haslingden Textile Mill Steam Engines 1879 Vintage Victorian Advert This is an original advert(not a later reproduction) carefully cut from a magazine of the period. It is about 12 inches by 4 inches. approx 30cm by 10cm) and is well printed on a lightweight satin finish paper. This is a fascinating item over 130 years old with a great vintage look from the era when the British textile industry led the world. The paper has yellowed slightly. But it is in good condition and would make a splendid framed item or collector's piece. It will be sent carefully in a good quality envelope with a card backing sheet to protect it. Postage and Packing charges are as set out in the table. Please note that this covers any number of adverts posted together- We don't charge anything extra after the first item. Powered by
|
|
|
Joseph Stubbs Manchester Mill Machinery 1877 Advert
Joseph Stubbs Manchester Mill Machinery 1877 Vintage Victorian Advert This is an original advert(not a later reproduction) carefully cut from a magazine of the period. It is about 8 inches by 3.5 inches. approx 20cm by 9cm) and is well printed on a lightweight satin finish paper. This is a fascinating little item over 125 years old with a great vintage look from the era when the British textile industry led the world. The paper has yellowed slightly. But it is in good condition and would make a splendid framed item or collector's piece. It will be sent carefully in a good quality envelope with a card backing sheet to protect it. Postage and Packing charges are as set out in the table. Please note that this covers any number of adverts posted together- We don't charge anything extra after the first item. Powered by
|
|
|
VINTAGE THOMAS D. MURPHY OLD MILL STREAM IN AUTUMN SCENIC CALENDAR PHOTO PRINT
Old Mill Stream in Autumn* Calendar Sample:1960's-1970's Circa* Measures 15.75" x 11.50" Thomas D. Murphy Company of Red Oak. Established 1889, creators of the modern advertising calendar. This Beautiful Calendar sample is In Excellent Condition! This Particular Calendar is a Linen Textured Lithograph! Free Shipping! ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13ff9021daf-0xf4-
|
|
|
Jefferson City, TN Zinc Mill Postcard
Circa 1905-1915 Postcard of Zinc Mill where ore is crushed Published by Minnis and Zinkle Fine+ with normal aging Never used
|
|
|
1946 Currier & Ives Winter in the Country Old Grist Mill shaving mug print ad
This is an original 1946 print ad for Williams of Glastonbury. CT, showing their Currier& Ives shaving mug and bowl, with the Currier& Ives painting"Winter in the Country" It measures approximately 11" x 8" overall, has no tears or stains, comes from a dry, high-altitude, smoke-free environment, and is strictly graded"Very Fine" This vintage ad is not any kind of later reproduction. Photocopy or reprint(most ads were published at one time only, and never commercially reproduced) An unusual and distinctive piece for your frame. Please scroll down to see our shipping information. Thank you for helping us celebrate our 16th year on ebay! t237U ZZZZ We offer archival-quality 48-page storage/display portfolios that are perfect for preserving and showing off this item. As well as your other valuable paper collectibles- ... moreWe have MANY more ads! Use this box to search ALL of our listings! in titles& descriptions Or. Click our logo to find a similar item from us! We ship WORLDWIDE! We will COMBINE as many items in one package as you want. To save shipping costs. We ship SIX DAYS EVERY WEEK. And if your payment arrives before noon Mountain Time, the package goes out the same day. A note on our highly-regarded shipping tubes: The tubes we use are very special. With thicker-than-normal walls and a unique cap-locking system so that the ends do not come off in transit: These tubes work perfectly for most items. Unless the item is too thick or is of the fold-out type; those will need to be shipped flat. All items which are shipped flat come with a sleeve and a nice, substantial backing board, not a cheap flimsy one. Shipping/Handling charges: U.S. tubes: $4.00 U.S. flats: $8.10 Canada tubes: $9.50 Canada flats: $11.50 For the rest of the world: tubes: $12.00 For the rest of the world: flats: $16.00 You have found the secret message We guarantee this item to be as described(or better) And it comes with a money-back guarantee and a three-day inspection period. Please email us with your ques
|
|
|
TRW Tool 2" High Speed End Mill 3 Flute
Putnam Tool Division of TRW Inc. 2" Dia. 3 Flute High Speed End Mill
|
|
|
SECO CARBOLOY BALL NOSE INDEXABLE COPY END MILL R218.20-01.253-54.100A
1-1/4" CARBOLOY INDEXABLE END MILL PART NO. R218.20-01.253-54.100A. 1-1/4" WELDON SHANK Good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with delivery confirmation. STOCK#EM635 Thanks for looking!
|
|
|
LOVEJOY 1" ARBOR FACE MILL HOLDER NO.5 MORSE TAPER SHANK
LOVEJOY 1" ARBOR FACE MILL HOLDER NO.5 MORSE TAPER SHANK Good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
PUTNAM HR-2 3/8" END MILL HOLDER W/ 1-1/4" WELDON SHANK
PUTNAM 3/8" END MILL HOLDER PART NO. HR-2 1-1/4" WELDON SHANK Good used condition. Actual item pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
4" CARBOLOY INDEXABLE FACE MILL R220.33/69-04.00C
4" CARBOLOY INDEXABLE FACE MILL PART NO. R220.33/69-04.00C 1-1/2" PILOT HOLE Very good used condition. As pictured. Payment due within ten days after auctions ends. Check. M/o, or PayPal accepted. Winning bidder to add $11.50 for USPS Priority Mail shipping with delivery confirmation. STOCK#FM607 Thanks for looking!
|
|
|
USST CAT 40 5/8" END MILL TOOL HOLDER
USST 5/8" END MILL HOLDER CAT 40 SHANK Used condition. Actual item pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. $5.00 for USPS Priority Mail shipping with delivery confirmation. STOCK NO. A53 Thanks for looking!
|
|
|
4" SECO INDEXABLE FACE MILL R220.33-04.00-12 EXCELLENT CONDITION
4" SECO INDEXABLE FACE MILL PART NO. R220.33-04.00-12 1-1/2" PILOT HOLE Like new condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $11.50 for USPS Priority Mail shipping with delivery confirmation. STOCK#FM695 Thanks for looking!
|
|
|
5" MITSUBISHI 45-DEGREE HIGH SHEAR INDEXABLE FACE MILL
5" MITSUBISHI INDEXABLE FACE MILL PART NO. SE445R0506E 1-1/2" PILOT HOLE. Very good used condition. As pictured. Payment due within ten days after auctions ends. Check. M/o, or PayPal accepted. Winning bidder to add $11.50 for USPS Priority Mail shipping with delivery confirmation. STOCK#FM612 Thanks for looking!
|
|
|
5 MORSE TAPER 2 1/16" x 16" DRILL lathe bit boring mill mt tool PTD USA
good used 5 morse taper shank drill Precision Twist Drill 2 1/16" x 16 1/4" long minor pitting on taper please check my other auctions and happy bidding! we can combine several drills into a large flatrate box for $16.85 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
5 MORSE TAPER 1 31/32" x 16" DRILL lathe bit boring mill mt tool CLEVELAND USA
good used 5 morse taper shank drill Cleveland USA 1 31/32" x 16 1/4" long please check my other auctions and happy bidding! we can combine several drills into a large flatrate box for $16.85 Powered by The free listing tool. List your items fast and easy and manage your active items. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13ff9287377-0xf3-
|
|
|
5 MORSE TAPER 1 23/32" x 17" DRILL lathe bit boring mill mt STANDARD TOOL USA
good used 5 morse taper shank drill Standard Tool USA 1 23/32" x 17 1/4" long please check my other auctions and happy bidding! we can combine several drills into a large flatrate box for $16.85 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
5 MORSE TAPER 1 17/32" x 23" DRILL lathe bit boring mill mt tool CHICAGO LATROBE
good used 5 morse taper shank drill Chicago Latrobe USA 1 17/32" x 23 1/4" long please check my other auctions and happy bidding! we can combine several drills into a large flatrate box for $16.85 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
5 MORSE TAPER 1 17/32" x 16" DRILL lathe bit boring mill mt tool CLE-FORGE USA
good used 5 morse taper shank drill Cle-Forge USA 1 17/32" x 16" long please check my other auctions and happy bidding! we can combine several drills into a large flatrate box for $16.85 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1 oz GOLD NAZI IRON CROSS BAR WW1 WW2 COIN DEUTSCHE REICHSBANK 100 MILL GERMANY
1 Oz GOLD NAZI IRON CROSS BAR The weight of one bar is 31.1 gram These bars are layered 100 Mills thick in 24k gold layered Please NOTE this is NOT solid Gold Each bar comes with a protective collectors case There is a Iron Eagle perched over the Iron Cross- the symbol of National socialist party on the front On the Rear There is a symbol of the Central Bank of Germany since 1876 till 1945 Dimensions: 40mm x 28mm x 3mm 1 Penny Starting at 1p!No Reserve Auction! Any questions please give me an email Thanks for looking!
|
|
|
indexible end mill inserts indexing insert diamond shaped tools tool 35
you get what you see except for the $1.5 or 6 used.some damage on those.mostly 1" end to end.35 total. Connecticut buyers to pay 6.35% sales tax. I will combine.Handling$1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plous $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
Used Peerless 20HP double pair roller mill for fine grinding
Peerless Roller Mill: 20HP. 230-460V motor Last running fine grinds of animal feed Approx 6" x 20" rolls double high Guaranteed with a 15 day right of return Freedom Equipment has helped hundreds of customers with their pelleting applications. If you have any questions or need any assistance Call 815-226-9150 or email robert@freedomequipment.com Freedom Equipment Specializes in: Pellet Mills. Pellet Mill Plants, Pellet Coolers, Screeners. Shakers, Sifters, Grain Cleaners Dehydrators. Dryers and Drying Systems. Hammermills. Hogs/Chippers/Grinders, Crumblers. Flakers and Roller Mills. Packaging. Processing and Plant Machinery. Available from Freedom Equipment: Equipment Appraisals. Liquidations, Equipment Rebuilding Services, Onsite Repair Service, Installation Services, Consulting Services, as well as quality New, Used, and Reconditioned ... moreMachinery. Industry Experience: General Feed. Aquaculture, Wood Pellet and Biomass Pellets, Organic and Inorganic Fertilizers, Plastics, Food Packaging and Processing, Pet Food, Pharmaceutical, and Chemical Industries. F R E E D O M E Q U I P M E N T Pelleting. Packaging, Processing& Plant Machinery Customer has a 14 day right of return for the full purchase price of the machine if not fully satisfied with this machine. Customer is responsible for all crating costs. And shipping charges both ways. Item must be received within 14 days from the time the unit is delivered. All invoices not paid within 10 days may be canceled without notice. 2151A ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13ff95b40a7-0xf3-
|
|
|
MARENA MILL
MARENA MILL MODEL; 28 2 HP 230/460 V 3 PHASE BED; 42" X 9"
|
|
|
MACHINIST TOOLS LATHE MILL Machinist Combination Protractor Satin Rule Square
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.ZZA
|
|
|
Vintage Mill Grove First Home in America of John James Audubon - Brochure
Vintage Mill Grove First Home in America of John James Audubon- Brochure Item is undated. Measures 4" x 9" See pictures for condition. Original and not a reproduction. Great addition to any collection. ITEM CONDITION- Read description carefully. Look at pictures carefully. If the item is electrical or mechanical and it does not say 100% fully tested. It is not fully tested as we do not have the required knowledge or equiptment to test the item. PAYMENT- Payment due within 4 calendar days of auctions end. We accept PayPal. SALES TAX- Pennsylvania residence must pay 6% sales tax. DOMESTIC SHIPPING- Your item will be shipped within 1 business day after payment. Business days are Monday thru Friday excluding holidays. All items paid before 8am EST. Monday through Friday will be shipped that day. If your payment comes in after 8am EST ... moreyour item will ship the following business day. When we print your shipping label eBay will list your delivery confirmation or tracking number next to your purchase. We do combine shipping on items bought on the same day. If you buy more then one item. Please wait for invoice. Shipping price listed is to lower 48 United States only. Hawaii. Alaska, Puerto Rico& Canadian bidders, shipping may be increased to cover any additional cost only if necessary. Any additional charges must be paid before we ship your item. INTERNATIONAL SHIPPING- Import duties. Taxes, and other charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Any additional charges must be paid before we will ship your item. RETURNS- We do our best to accurately describe all the items we sell. If you have any questions. Contact us before bidding. If you would like to return an item please contact us for a RMA number and return instructions. Items returned without an RMA number will not get refunded. If an item was delivered damaged. You must describe the damage when asking f
|
|
|
Kurt DL600C CNC Mill 6" Double Machinist Vice 02157
Kurt DL600C CNC Mill 6" Double Machinist Vice 02157 Shipping Weight: 97 lbs(ADY190 4.4.C L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional charge ... moreto the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856) 881-31
|
|
|
BENCH TOP MACHINIST DRILL VISE - TOOLS FOR LATHE MILL
THIS AUCTION WILL END ON WEDNESDAY JULY 24th IF YOU PAY BY WEDNESDAY JULY 24th AT 5:00 PM Eastern Standard Time. I WILL SHIP RIGHT OUT TO YOU. IF YOU PAY AFTER THIS TIME& DATE IT WILL SHIP OUT ON TUESDAY JULY 30, 2013 WHEN WE RETURN FROM A WEEKEND AWAY. HOPE THAT MY BUYERS UNDERSTAND& WE LOOK FORWARD TO DOING BUSINESS WITH YOU. UP FOR AUCTION PRECISION MACHINIST TOOLS& PARTS VINTAGE BENCH TOP MACHINIST DRILL VISE MEASURES 10" X 5 1/2" X 4" PLEASE REFER TO ALL PICTURES TO SEE CONDITION* Being SOLD AS IS* PLEASE REFER TO ALL PICTURES TO SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. ... moreIF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. No RETURNS.
|
|
|
MADE IN USA CAT50 1-1/4" DIAMETER ENDMILL HOLDER CAT 50 END MILL LOT C4178
LOT C4178 WE ARE OFFERING A MADE IN USA CAT50 1-1/4' DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
FITZ-RITE CAT50 1" DIAMETER ENDMILL HOLDER CAT 50 END MILL LOT C4107
LOT C4107 WE ARE OFFERING A FITZ-RITE CAT50 1" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13ffda8d02b-0xfe-
|
|
|
WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER END MILL QH-2 LOT C2228
LOT C2228 WE ARE OFFERING A WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER QH-2A WE HAVE MANY MORE OF THESE HOLDERS LISTED. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13ffda8d13d-0xff-
|
|
|
BSA Lincoln Heritage Council Camp Tunnel Mill Scout Reservation 75th 1985 Patch
Up for auction is a BSA Camp Tunnel Mill Scout Reservation 75th Anniversary Diamond Jubilee 1985 patch from the Lincoln Heritage Council.
|
|
|
Bits and Pieces The Old Swiss Mill Wood Jigsaw Puzzle 16 x 13 Complete
Bits and Pieces The Old Swiss Mill Wood Jigsaw Puzzle 16 x 13 Complete The white torn spot on right is on the BOX not the puzzle Bits and Pieces The Great International Puzzle Collection Complete with Hidden Images The Old Swiss Mill Wood Jigsaw Puzzle 16.5 x 13 inches Complete I know it is complete because it is in the box all put together! I tried to take a photograph. That white tear is on the OUTSIDE of the box. The puzzle pieces are fine. I can't guarantee it will still be together when you receive it. But it is ALL THERE. 308 pieces Smoke Free Home For security reasons. Please communicate using the Ebay message service. for more great items! Again. The white torn area is on the OUTSIDE of the BOX not the puzzle The puzzle is complete The wooden pieces are very substantial Paypal Accepted. I strive for 100% positive feedback and ... moredo my best to describe items accurately. If I have overlooked something or made a mistake in the listing. Please communicate with me through Ebay's message service(for security reasons) so that we can reach a solution together. Thank you for understanding that sometimes well-intentioned sellers make honest mistakes. We ship within 4 days of payment and we will email you when your item is shipped. Shipping costs are for the lower continental United States. Residents of Alaska and Hawaii please email us before bidding for a shipping quote to your states. Recycled packaging materials are used to save costs and environmental resources. Fragile items are packed with careful attention to make sure your items are safely delivered to you. Clothing and linens are shipped in Tyvek or manila envelopes. Perfume must be shipped parcel post due to USPS regulations. Books are shipped media mail. Priority rate usually means the item will arrive in 3-5 days. But media mail and parcel post will take 7-14 days. Because Media Mail is a discounted shipping option available through the USPS, these packages are given very low priority and will only be loaded on USPS trucks after all other mail is l
|
|
|
"Hardy Boys Series#3 Secret of the Old Mill No Photo yet Free Media mail
The Hardy Boys#3 Secret of the Old Mill Series Grosset& Dunlap Taking Photos No photos yet hardback with NO dust jacket. Free Media Shipping only Has bumps to corners. Pages are crisp yellowing at edges. See photos, spine in Very good condition Has slight bumps to corners, pages are crisp& clean. Very slight smudges to edges of pages when you look at the book closed. See photos, has no writing in pages Well taken care of, Very Nice Quality. in the series. Grosset and Dunlap Hardcover book. Author John Button writing under pseudonym"Franklin W. Dixon. Copyright 1962. Please read all of the discription it is full of great info for you. Be sure to contact me with questions or if you would like more pictures. I will do my best to respond the same day. In all of Ebay there are very few just like this. Great gift for Someone First ... more9 photos include item listed. Then the following photos ar Special e of items listed or to be listed in the future. Please ask questions before bidding. I learned in the Business World There is no dumb question. Only Dumb Answers I Get most of my items from Estate Sale. I sell them" as found" I do no repair, cleaning. Or alterations. I do this because most avid collectors would rather receive their item in as original co ndition as possible. One Mans patina is another mans tarnish. Have questions about this item. Or about other accepted payment methods besides PayPal email Remember there is no dumb questions only dumb answers. 1) Feedback: We value both customers and our 100% Feedback Rating We work hard to provide accurate listings. Multiple photographs, careful packing, fair shipping and fast and friendly communication. I leave feedback promptly as soon as you the buyers does. This way we can be assured it has arrived safely! We ALWAYS strive to earn 5 stars in every feedback category, So please contact me first if you have any concerns, and if we have made an error in the listing other than something minor we will do our best to make it right. Remember we all make mi
|
|
|
XL Arcelor Mittal Steel Mill polo shirt 80" Hot Strip embroidered
You are bidding on a gently used. Size XL(25" pit to pit) polo shirt. It is fully embroidered on the front left chest MITTAL, and on the right sleeve 80" HOT STRIP. It has no holes, rips, stains, or tears. Buyer pays $5.50 shipping. Your payment is due within 6 days. If your payment is not received, a non-paying bidder report will be filed. Paypal& M.O.s accepted. Yes, I will combine shipping on multiple items, even if won over a few days. please contact me though if doing this) Thank you. WHEN LEAVING FEEDBACK, STAR RATING PLEASE LOOK AT THE PRICE I PAID FOR SHIPPING ON THE LABEL. I ONLY CHARGE A BIT OVER ACTUAL TO TRY TO COVER SOME OF THE FEES CHARGED BY EBAY(9% on the selling price and now shipping) AND PAYPAL. THANKS IN ADVANCE. PLEASE NOTICE- EBAY IS NOW CHARGING 9% ON THE TOTAL SALE(INCLUDING THE SHIPPING) 4
|
|
|
2XL Arcelor Mittal Steel Mill polo shirt polyester material Hartwell brand #2
THE WHITE SPOTS ARE FROM THE CAMERA. THEY ARE NOT ON THE SHIRT. You are bidding on a VERY gently used. Size 2XL(26" pit to pit) polo shirt. It is fully embroidered on the front left chest. It is made of 52% cotton, and 48% polyester. It is a sharp looking shirt! It has no holes, rips, stains, or tears. Buyer pays $5.50 shipping. Your payment is due within 6 days. If your payment is not received, a non-paying bidder report will be filed. Paypal& M.O.s accepted. Yes, I will combine shipping on multiple items, even if won over a few days. please contact me though if doing this) Thank you. WHEN LEAVING FEEDBACK, STAR RATING PLEASE LOOK AT THE PRICE I PAID FOR SHIPPING ON THE LABEL. I ONLY CHARGE A BIT OVER ACTUAL TO TRY TO COVER SOME OF THE FEES CHARGED BY EBAY(9% on the selling price and now shipping) AND PAYPAL. THANKS IN ADVANCE. ... morePLEASE NOTICE- EBAY IS NOW CHARGING 9% ON THE TOTAL SALE(INCLUDING THE SHIPPING) 4{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13ffe20c818-0xf5-
|
|
|
Apollo Pex Crimp Tool Set with Case and Free Mill-Rose Ringcrusher Tool!!!
Apollo Pex Crimp Tool Set with Case and Free Mill-Rose Ringcrusher Tool! Some of the pieces in the set have rust but are solid mechanically and in good working condition. See pictures. Shipping is $15.95. US bidders only. Good luck bidding!
|
|
|
Dulling machine parts for horizontal and verticle mill
Dulling machine Parts for Horizontal and Vertical Mill Bearing assemble for a horizontal mill looks good 8 inches wide the V’s are approx. 4 ¾. Other part is a holder for a milling machine or jig bore. Removal of items will be the responsibility of the buyer and there will be a removal deadline. Sold As Is– No Returns Sold with no reserve. No minimum. PayPal ONLY.
|
|
|
Cat 40 Taper Face Mill Holder with 4" dia Mitsubishi BF407R0406E carbide insert
Cat 40 Taper Face Mill Holder with 4" dia Mitsubishi BF407R0406E Carbide Insert Cutter ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3797-69-C THERE IS A $15.00 HANDLING INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
MADE IN USA NMTB50 1" ENDMILL HOLDER NMTB 50 END MILL LOT C4388
LOT C4388 WE ARE OFFERING A MADE IN USA NMTB50 1" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
NMTB50 SHELL FACEMILL HOLDER 1-1/4" PILOT NMTB 50 FACE MILL LOT C4365
LOT C4365 WE ARE OFFERING A NMTB50 MADE IN USA SHELL/ FACEMILL HOLDER 1-1/4" PILOT YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
MADE IN USA NMTB50 1-1/4" ENDMILL HOLDER NMTB 50 END MILL LOT C4405
LOT C4405 WE ARE OFFERING A MADE IN USA NMTB50 1-1/4" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
NMTB50 SHELL FACEMILL HOLDER 1" PILOT NMTB 50 FACE MILL LOT C4390
LOT C4390 WE ARE OFFERING A NMTB50 CINCINNATI MILACRON SHELL/ FACEMILL HOLDER 1" PILOT YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
PARLEC NMTB50 SHELL FACE MILL HOLDER 2" PILOT NMTB 50 FACE MILL LOT C4392
LOT C4392 WE ARE OFFERING A NMTB50 PARLEC SHELL/ FACEMILL HOLDER 2" PILOT YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
ERICKSON NMTB50 1/2" ENDMILL HOLDER NMTB 50 END MILL LOT C4406
LOT C4406 WE ARE OFFERING A ERICKSON MADE IN USA NMTB50 1/2" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
ERICKSON NMTB50 1/2" ENDMILL HOLDER NMTB 50 END MILL LOT C4409
LOT C4409 WE ARE OFFERING A ERICKSON MADE IN USA NMTB50 1/2" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
MADE IN USA NMTB50 7/8" ENDMILL HOLDER NMTB 50 END MILL LOT C4413
LOT C4413 WE ARE OFFERING A MADE IN USA NMTB50 7/8" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
ERICKSON NMTB50 1-1/4" ENDMILL HOLDER NMTB 50 END MILL LOT C4416
LOT C4416 WE ARE OFFERING A ERICKSON MADE IN USA NMTB50 1-1/4" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
COLLIS NMTB50 1-1/4" ENDMILL HOLDER NMTB 50 END MILL LOT C4417
LOT C4417 WE ARE OFFERING A COLLIS MADE IN USA NMTB50 1-1/4" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
ERICKSON NMTB50 2" ENDMILL HOLDER NMTB 50 END MILL LOT C4435
LOT C4435 WE ARE OFFERING A ERICKSON MADE IN USA NMTB50 2" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
MADE IN USA NMTB50 1" ENDMILL HOLDER NMTB 50 END MILL LOT C4436
LOT C4436 WE ARE OFFERING A MADE IN USA NMTB50 1" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
ERICKSON / KENNAMETAL NMTB50 2" ENDMILL HOLDER NMTB 50 END MILL LOT C4009
LOT C4009 WE ARE OFFERING A ERICKSON/ KENNAMETAL NMTB50 2" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
ERICKSON / KENNAMETAL NMTB50 2" ENDMILL HOLDER NMTB 50 END MILL LOT C4010
LOT C4010 WE ARE OFFERING A ERICKSON/ KENNAMETAL NMTB50 2" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
ERICKSON/KENNAMETAL NMTB50 1-1/4" ENDMILL HOLDER NMTB 50 END MILL LOT C4023
LOT C4023 WE ARE OFFERING A ERICKSON/KENNAMETAL NMTB50 1-1/4" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
P@W - TMS NMTB50 1/2" ENDMILL HOLDER NMTB 50 END MILL LOT C4027
LOT C4027 WE ARE OFFERING A P@W- TMS NMTB50 1/2" DIAMETER ENDMILL HOLDER YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|