In 
 
Order by: 
Available to: 
Price: 
 - 
This site contains affiliate links for which I may be compensated
$
69.00
Buy It Now
Free Shipping
Condition: Used
Location: Stevensville, United States
Comes with what you see in the pictures. Please look at all pictures for condition.
$
109.99
Buy It Now
Free Shipping
Condition: New
Location: South El Monte, United States
Machining work to make it fit into their own specific lathe T slot. All working parts hardened and precision ground. We will get back to you as soon as ... morepossible. 6 Quick Change Tool. South Bend 9"" & 10"", Atlas 10 & 12"", Delta 10 & 11"" Nardini TT1000 & TT1200 and many other.
$
108.42
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: Brand new. No time wasted with shims. All working parts hardened and precision ground. Piston type tool post are precision engineered to ... moreassure repeatability accuracy. Piston type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-100 Piston Type Tool Post Swing Dia 12".
$
101.59
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: Brand new. No time wasted with shims. All working parts hardened and precision ground. Piston type tool post are precision engineered to ... moreassure repeatability accuracy. Piston type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-100 Piston Type Tool Post Swing Dia 12".
$
6.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
383.84
Buy It Now
$65.53 Shipping
Condition: Used
Location: Jacksonville, United States
When the lever is pulled to the left, the turret retaining pin engages and the head advances to machine. When the lever is pulled to the right, the head ... moreretracts, then a cam automatically unlocks the turret head.
$
89.99
Buy It Now
Free Shipping
Condition: Used
Location: Anderson, United States
$
190.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Nashville, United States
$
14.75
Buy It Now
$6.05 Shipping
Condition: New
Location: Merrimack, United States
South Bend, Logan, Atlas, Sheldon AXA QCTP Dial Indicator Mount, Dual Position. Color is typically grey, or silver. Note: Does not include digital indicator ... moreshown for reference only.
$
65.00
Buy It Now
$10.40 Shipping
Condition: New
Location: Berrien Springs, United States
New OEM M6-12A Half Nuts / Split Nuts for the 6" Atlas 618 & Craftsman 101 Lathes. M6-12A half nuts used in the later model lathes, they are wider than ... morethe early M6-12 nuts. The threaded portion is 3/4" wide.
$
85.00
Buy It Now
$10.40 Shipping
Condition: New
Location: Berrien Springs, United States
N ew Half Nuts / Split Nut for Craftsman and Atlas 6" Lathe. M6-12A half nuts used in the later model lathes, they are wider than the early M6-12 nuts. ... moreThe threaded portion is 3/4" wide. Made out of 360 Brass - much harder than the OEM Zamak nuts yet still softer than the screw.
$
4.18
Buy It Now
$4.82 Shipping
Condition: New
Location: Fountaintown, United States
Replaces #9-111 part perfectly on collars used on Atlas Lathe and Shaper. Atlas 7" Shaper also uses 2 felt washers #9-111 and oil for lubrication. Replace ... morethose worn out felt washers on your 10 Atlas Lathe.
$
29.95
Buy It Now
$18.80 Shipping
Condition: Used
Location: Youngstown, United States
Up for bids is a Traverse Gear Case Assembly. Part# 10F-11X for a Atlas or Atlas/ Craftsman 10" or 12" lathe in great condition. Included is ... morethe Gear Case, part# 10F-11; Shaft, part# 9-68; Gear, part# 9-102-12S; and Gear, part# 9-102-24. There are no chipped teeth, very minimal wear on the gears, the brown in the photos is grease and toning, no rust. This came off a 10" Atlas Lathe Model H-42, but will fit a 10" TH36, TH42, or H36 model Atlas lathes, a 12" Atlas lathe or Atlas/ Craftsman Model 101.07403, 101.27430, 101.27440. If you have any questions feel free to ask and I will do my best to answer. Buyer pays shipping on this item, calculated shipping price includes insurance and delivery confirmation. Thanks for looking and have a great day.
$
7.25
Buy It Now
$5.45 Shipping
Condition: New
Location: Merrimack, United States
Atlas Lathe 1-1/2 x 8 Spindle Thread Protector. This has a nice ribbed edge for gripping when your hands are oily. Atlas Thread Protector. These 3D printed ... morespindle protectors are amazingly strong and fit all 1 1/2 x 8 spindles.
$
699.99
Buy It Now
$85.99 Shipping
Condition: Used
Location: Lombard, United States
Used condition, original paint, overall nice shape some surface rust spots to the metal surfaces. Hand crank turns freely. Please see photos for details ... moreand condition. Any information on this item would be greatly appreciated. Thanks for looking Shipping price to the lower 48 only No po box shipping
$
105.00
Buy It Now
$15.00 Shipping
Condition: New
Location: Schaumburg, United States
Such As:South Bend 9" & 10",Atlas 6", 10" & 12",Delta 10" &11",Nardini TT1000 &TT1200 and Many Other Similar Size Imported Lathe. It's too Big, Not Suitable ... morefor 7" x 10", 7" x 12", 7" x 14" and 7" x 16" mini lathe Made in China.
$
21.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
249.99
Buy It Now
$18.40 Shipping
Condition: New
Location: Berrien Springs, United States
Fits Atlas / Craftsman 9" thru 12" lathes. New 5" 3 jaw self-centering import lathe chuck with 1-1/2" -8 spindle mount backing plate.
$
24.95
Buy It Now
$4.89 Shipping
Condition: New
Location: Cross Plains, United States
Atlas Mark II. Setup to desired position, ZERO the indicator. Dial Indicator Mount Only. ( MOUNT ONLY - DOES NOT INCLUDE DIAL INDICATOR! ). MOUNT ONLY ... more- DOES NOT INCLUDE DIAL INDICATOR! I use a Digital Indicator.
$
35.29
Buy It Now
Free Shipping
Condition: New
Location: Fountaintown, United States
One Atlas Lathe manual and more CD disc. Atlas Lathe 6 mounting instructions PDF. Atlas Lathe 6 threading chart JPEG. Atlas Lathe 6 lube and speed chart ... morePDF. One pint 16 oz. 20W or ISO68 non -detergent Oil.
$
30.00
Buy It Now
$6.00 Shipping
Condition: New
Location: Berrien Springs, United States
FREE SHIPPING IN US! Atlas/ Craftsman 9" 10" 12" Lathe Steady Rest Jaws/ Fingers with Bearings. New Steady Rest Jaws/ Fingers with Roller ... moreBearings for Craftsman Model 101 and Atlas 9" 10" 12" Lathes. Take those oily& messy brass fingers out and replace them with these smooth running roller bearings! 1] Set of 3 Fingers- they are 3/8" x 7/16" and 2-5/16" long with 1/2" diameter shielded bearings. Fits Atlas& Craftsman Steadyrest with casting numbers 9-326. 10-328T and 10-326B commonly used on the following models of Craftsman Lathes: 918, 10128900, 10128910, 10128930, 10128940, 10128950, 10128970, 10128980, 10128990, 10128991, 10127590, 101.07403, 101.27430, 101.27440. And the following models of Atlas Lathes: TH36. TH42, TH48, TH54, TV36, TV42, TV48, TV54, H36, H42, H48, H54, V36, V42, V48, V54, QC42 and QC54. I leave Feedback at time of shipping to notify buyer of shipment. No feedback ransoming here! Questions? email me! Thanks for looking. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Posted with
$
11.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
UP FOR SALE IS THE HEADSTOCK SPINDLE BACK GEAR W/ BUSHING 10-242 IN VERY GOOD CONDITION. YOU WILL GET THE PARTS JUST LIKE YOU SEE IT IN THE PICTURE. SEE ... moreMY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I accept cashier's check. Or credit card by phone to my merchant account.MC, VISA,AMEX,DISCOVER) Remember to give your shipping address and phone# FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: For this item will be $3.99 USPS FIRST CLASS Mail with Delivery Confirmation. I ship most items the next weekday after receiving payment. i will combine shipping to save you money if you buy more items within a week- as long as they go together in the same box. QUESTIONS: HOME PHONE/FAX: 954) 428-6575 CELL PHONE: 954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Click Here. Double your traffic. Try Vendio Gallery Risk FREE!
$
59.00
Buy It Now
Free Shipping
Condition: New
Location: Dayton, United States
NEW MANUFACTURED ABS Gear. Useful on Craftsman and Atlas 10" and 12" change gear lathes. Late and F model lathes have. 35"~ tooth face. "Alien" gear not ... moreoriginally available. 8.062" od. You won't be disapointed in the performance of this gear.
$
100.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Hastings, United States
Nice- Original tailstock cast and base assembly for a 6" Atlas 618 or Craftsman 101 lathe. Tailstock bearing. Part number M6-30, is also included. ... moreTailstock base is part number M6-6. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
15.00
Buy It Now
$4.02 Shipping
Condition: New
Location: Floyds Knobs, United States
Similar to Atlas / Craftsman – 9-103. ~ 1.65” from top of pin to base. I am not 100% sure if the original’s were press fit or not, so. note that this ... moreis a threaded unit and you may need to tap your unit to install (5/16-18).
$
169.00
Buy It Now
Free Shipping
Condition: Used
Location: Portland, United States
Nice- Original headstock chip guard/ cover for an underdrive 12" Atlas or 12" Craftsman Commercial lathe. Cover is part number 122-044. Includes ... moreoriginal mounting bolt shown. Mounts between the headstock and bed ways. In fine order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
25.00
Buy It Now
$10.60 Shipping
Condition: Used
Location: Hickory, United States
Up for your consideration is a vintage and genuine Craftsman# 9-2033 straight tool holder for the Atlas 618 or Craftsman 101 series 6” metal lathes. This ... moretool holder is in super excellent condition. Gently used only a couple of times. The mounting shank is 5/16” X 5/8” and it takes 3/16” square tool bits. The shank of the tool holder is marked with“Craftsman, no. 2033 Turning Tool Holder” To be sold as Craftsman straight tool holder, 1) tool bit and its original box as you see it pictured. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license• Payment must be made within 4 days
$
39.99
Buy It Now
Free Shipping
Condition: Used
Location: Ivoryton, United States
Atlas Model 618 Bench Lathe Instruction& Parts Manual For models: No. 618 Also 12A& 16A Armature Lathe Includes sections on: Instruction, Parts ... moreList Lubrication, Number of pages: Approx 18 Condition of original: Good Publication No. N/A Publication date: July 1976 Added Notes: Includes Threading chart with gear positions. Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. See my for more manuals
$
118.95
Buy It Now
$23.00 Shipping
Condition: New
Location: Saint Charles, United States
SHARS 4" 3 Jaw Self Centering Lathe Chucks w/ TIR Certificate + 1-8 Back Plate New. For back plate you would not need to drill any mounting holes but ... moreyou will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
31.99
Buy It Now
Free Shipping
Condition: New
Location: Sarasota, United States
Atlas 618/ Craftsman 101 6" Lathe Steady Rest Jaws/ Fingers with Bearings. New Steady Rest Jaws/ Fingers with Roller Bearings for Craftsman Model ... more101 and Atlas 618 6" Lathes. Take those oily& messy brass fingers out and replace them with these smooth running roller bearings! FREE SHIPPING IN US! Listing is for[1] Set of 3 Fingers- they are 5/16" square by 2" long with 3/8" diameter sealed bearings. Fits Atlas& Craftsman Steadyrest part number M6-326. I leave Feedback at time of shipping to notify buyer of shipment. No feedback ransoming here! Questions? email me! Thanks for looking. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Posted with
$
142.37
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-111 Wedge Type Tool Post .
$
108.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description:.
$
259.00
Buy It Now
Free Shipping
Condition: Used
Location: Portland, United States
DESCRIPTION: USED. ATLAS CRAFTSMAN 12" METAL LATHE COUNTERSHAFT ASSEMBLY. THIS STYLE MOUNTS TO THE LATHE BED. THERE SHOULD BE A MOUNT BRACKET CAST ... moreIN THE BACK OF THE BED. THE COUNTERSHAFT CASTINGS AND PULLEYS ARE FINE. LOOK AT THE PICTURES. I DID NOT FIND THE PIN THAT LOCKS IT TO THE LATHE BED. THE BRACKET THAT LOCKS THE ACTUATOR LEVER IS NOT INCLUDED. THE BRACKET IS A PIECE OF METAL WITH A NOTCH IN IT TO HOLD THE LEVER. IT'S FOUND ON THE HEADSTOCK AND IS SANDWICHED BETWEEN THE BACK GEAR AND HEAD CASTING. THE COUNTERSHAFT WILL BE BOLTED TO A BOARD AND PACKAGED WITH CARE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what t
$
39.95
Buy It Now
Free Shipping
Condition: New
Location: Selma, United States
This is a not a photocopy. But a reproduction of an original Lathe Cutting Tools Chart by Atlas Press Co. Chart measures 16 5/16" x 21 5/16. This ... moreposter has been professionally digitally edited, retaining some of the slight imperfections of the original publication from the 1940's. Professionally printed on 36 lb high resolution coated bond matte poster paper, comparable to the original print. Suitable for framing. Excellent addition to your shop. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
120.00
Buy It Now
$10.40 Shipping
Condition: New
Location: Berrien Springs, United States
New OEM 341-051 Mitre Gear for Power Crossfeed Assembly. Fits 10" & 12" Atlas / Craftsman lathes.
$
129.99
Buy It Now
$9.65 Shipping
Condition: Used
Location: Nashville, United States
As shown, in very nice condition with virtually no wear from use.
$
39.99
Buy It Now
$5.25 Shipping
Condition: Used
Location: Nashville, United States
Atlas 6" Lathe Tailstock Arbor Lock Lever Handle 1.35" This listing is for a Atlas 6" Lathe Tailstock Arbor Lock Lever Handle 1.35" ... morelong with nice chrome as shown in the photos. It is threaded for 1/4" X 20 TPI. There were two sizes of this handle- the one in this listing measures about 1.35" from end to end. The larger one measures about 1.92" and I have one of those listed as well. The lathe I took this off of was a Atlas lathe. But it fits many lathes. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $2.95 Flat Rate Shipping anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
$
199.00
Buy It Now
Free Shipping
Condition: Used
Location: Portland, United States
This is in good used condition with normal signs of use and no signs of abuse.
$
45.95
Buy It Now
$12.45 Shipping
Condition: New
Location: Mentor, United States
Had a bunch of double start left hand threads to cut so I needed a stop for my Clausing. I have one set up to use on the Clausing but the others are all ... moreun drilled (For the cross slide adjusting stud) They are all ready for you to set up for your own machine.
$
11.89
Buy It Now
$6.05 Shipping
Condition: New
Location: Merrimack, United States
The tray sits anywhere along the bed and is able to be slid around depending on where the cutting is happening. Atlas Craftsman Unique Chip Tray. This ... morelittle tray catches that debris and allows for easy empty after regular use.
$
12.99
Buy It Now
$4.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, in sound condition with some general wear, measures 5/8" diameter with a 1/4" bore
$
48.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Poulsbo, United States
You are bidding on the item you see in the pictures. Atlas craftsman 10-12" metal lathe 6" faceplate& dog# 9-15. 1-1/2" 8 tpi. Thanks ... morefor looking. Posted with
$
29.99
Buy It Now
$7.99 Shipping
Condition: Used
Location: Union Grove, United States
TH-48 (10" / 12").
$
7.89
Buy It Now
$4.00 Shipping
Condition: Used
Location: Diamond Point, United States
Make Supersized seem small. Faceplates and chucks. Adjusting gibs.
$
350.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Tewksbury, United States
For sale is an Atlas/Craftsman 12" lathe heavy duty Steady Rest, #050-029, in good usable condition, looks to have barely been used, will need a little ... morecleaning and oiling.
$
175.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Pomona, United States
ATLAS CRAFTSMAN 6" 101 , 618 LATHE CHANGE GEAR ASSEMBLY SIZES 2-32, 1-36, 1-40, 1-44, 1-46, 1-52,1-54 AND 1-56 PART # M6-101 X IN GOOD CONDITION.
$
229.99
Buy It Now
$39.99 Shipping
Condition: Used
Location: Union Grove, United States
CRAFTSMAN 101 / ATLAS 618 (6").
$
29.99
Buy It Now
Free Shipping
Condition: New
Location: Portland, United States
These are brand new old stock. They are original pieces that have never been installed.
$
55.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Chelmsford, United States
Faceplate in absolutely great condition. No significant dings, gouges, or misdirected cuts - really well preserved. Has extremely light surface rust, ... moreI didn’t bother to clean it, a quick hit with a green pad would clean it perfectly. I verified the thread count via a gauge. See the picture for the 1” measurement.
$
8.50
Buy It Now
Free Shipping
Condition: New
Location: Marietta, United States
Does not fit the models with no back gears or the later model with not access door. - Great little addition if you have a 618 lathe! But it still also ... moreserves the function of locking the spindle tight to remove those really stuck chucks.
$
14.99
Buy It Now
Free Shipping
Condition: Used
Location: Mansfield, United States
MAKER - CRAFTSMAN / DUNLAP. GOOD USED CONDITION WITH NORMAL USAGE WEAR AND AGE. SCUFFS/SCRATCHES, DENTS/DINGS, STAINING, GEAR TEETH ARE IN GOOD SHAPE ... moreWITH NORMAL WEAR. CHANGE GEAR #3233.
$
57.00
Buy It Now
$7.25 Shipping
Condition: New
Location: Baltimore, United States
Ball crank handle for Atlas Craftsman 10 12". 3/8" bore, 1/8" key way. Not plastic from corn.
$
14.99
Buy It Now
$4.85 Shipping
Condition: Used
Location: Nashville, United States
$
99.99
Buy It Now
$10.40 Shipping
Condition: New
Location: Berrien Springs, United States
The early 9" lathes used a knob instead of a handle - not sure if this can replace the knob.
$
34.99
Buy It Now
$11.99 Shipping
Condition: Used
Location: Spring Grove, United States
$
39.85
Buy It Now
$36.05 Shipping
Condition: Used
Location: Youngstown, United States
Will combine shipping. G2
$
224.99
Buy It Now
$42.99 Shipping
Condition: Used
Location: New Britain, United States
DESCRIPTION: USED. ATLAS CRAFTSMAN 12" METAL LATHE COUNTERSHAFT ASSEMBLY. THIS STYLE MOUNTS TO THE LATHE BED. THERE SHOULD BE A MOUNT BRACKET CAST ... moreIN THE BACK OF THE BED. THE COUNTERSHAFT CASTINGS AND PULLEYS ARE FINE. LOOK AT THE PICTURES. I DID NOT FIND THE PIN THAT LOCKS IT TO THE LATHE BED. THE BRACKET THAT LOCKS THE ACTUATOR LEVER IS NOT INCLUDED. THE BRACKET IS A PIECE OF METAL WITH A NOTCH IN IT TO HOLD THE LEVER. IT'S FOUND ON THE HEADSTOCK AND IS SANDWICHED BETWEEN THE BACK GEAR AND HEAD CASTING. THE COUNTERSHAFT WILL BE BOLTED TO A BOARD AND PACKAGED WITH CARE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what t
$
55.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Sultan, United States
Sears Atlas Craftsman 618 Lathe Parts M6-25 Gears And Assembly. Condition is Used. Shipped with USPS Ground Advantage.
$
101.59
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: Brand new No time wasted with shims All working parts hardened and precision ground Piston type tool post are precision engineered to assure ... morerepeatability accuracy Piston type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-100 Piston Type Tool Post Swing Dia 12".
$
123.78
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: Brand new. No time wasted with shims. All working parts hardened and precision ground. Wedge type tool post are precision engineered to assure ... morerepeatability accuracy. Wedge type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. .
1 2 3 4 5 6 7 8 9 10 11 12 13
 In 

Former Listings  
 
Atlas th36 metal lathe tool holder
This tool holder came with my Th36 atlas metal lathe. It looks like it could be a left hand and a right hand tool holder.It has a screw on top and bottom. You make the call. Please email me if you have any questions. Thanks.
Atlas 6 in 10100 metal lathe bed feet
Atlas 6 in 10100 lathe bed feet.
6 in atlas 10100 metal lathe draw bar
6 in atlas 10100 metal lathe draw bar. i will combine shipping if i can.
Atlas th54 metal lathe. Original 6" face dog plate 9-15 1 1/2" x 8 tpi.
Atlas th54 metal lathe. Original 6" face dog plate 9-15 1 1/2" x 8 tpi. This face plate is in great condition. It has its original paint. I will combine shipping if possible. Thanks for looking.
LATHE MANDREL SET. ATLAS CRAFTSMAN
Small set of Lathe Mandrels. No rust but light staining. sizes are as follows: 5/16. 3/8, 7/16. I only ship on the Saturday after auction ending day. If this is a concern I ask that you not place a bid.
USED 83 TOOTH CHANGE GEAR From Atlas Lathe
USED 83 TOOTH CHANGE GEAR These gears were used on an Atlas Lathe. Gear specifications are: 625 ID Bores(2) 125 X.0626 key Ways 180 deg apart.375 width/thick 20 DP 14.5 Deg Pressure angle Manufacturer: Boston Gear MFG Model: GA" SERIES GEARS Picture is of the actual gear being offered! Since you. The buyer do not have the luxury of visually inspecting this item before purchasing, you may return the item postmarked within 14 days of receiving if unsatisfied for any reason Use the return address provided on the original package. Bidder's/Buyer's who Privatize their feed back are not welcome! Thank You for looking and or bidding!
ATLAS LATHE TREADING TOOL
ATLAS LATHE TREADING TOOL CONDITION: USED– Normal Wear and Tear– See Pictures Good Working Condition: Discounts– This only applies to items displaying this promotion. You must WAIT for an INVOICE to get these discounts. Items must be purchased on the same day. Buy 2 items 3% Discount Buy 3 items 5% Discount Buy 4 items 7% Discount Buy 5 items 10% Discount Please e-mail with questions Free Shipping- US Only n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e5318daf5-0x101-
Atlas lathe micrometer stop for carraige
This is a micrometer carriage stop for Atlas lathes. It is used and in good condition.
Atlas lathe telescoping steady rest for 12" lathe
This is a telescoping steady rest for a 12" Atlas lathe. It is in good condition.
Spindle Back Gear 10-242 for Craftsman / Atlas 101.07403 12" Lathe
Spindle Back Gear 10-242 for Craftsman/ Atlas 101.07403 12" Lathe. Also fits 10" Craftsman/ Atlas Lathe. Please check fitment before bidding. Please see my other listings for more Crafts man/ Atlas Lathe Parts. Free Shipping. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Tumbler Bracket Assembly for Craftsman / Atlas 101.07403 12" Lathe
Forward/ R everse Tumbler L3-21A Assembly for Craftsman/ Atlas 101.07403 12" Lathe. Very nice condition. Incl udes knob. P in. Spring and plu n ger. May also fit Craftsman/ Atlas 10" models. Please check fi tment be fore b idding. Please see my other listings for more Crafts man/ Atlas Lathe Parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
NICE ATLAS 10" CRAFTSMAN 12" LATHE COMPOUND REST TOP DRIVE SCREW 10F-305
Nice- Original compound rest top screw with plate and collar assembly for a 10" Atlas or 12" Craftsman lathe. Original woodruff key and mounting bolts are also included. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LATHE 1/2" TOOL BITS LOGAN SOUTH BEND ATLAS CLAUSING HARDINGE ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Neatro Packaging In Box Condition Excellent Quantity 12 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Jacobs 59B Chuck w/Chuck Key Southbend, Atlas Logan headstock Lathe Chuck
The chuck moves freely and the mounting 1/12 X 8 threads are in good condition Ships to continual United States only and I'll offer free shipping with Buy It Now pricing Thanks for looking.
LATHE THREADING TOOL HOLDER ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Williams Packaging In Original Box Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Williams# 2050. 3/4" x 3/8" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
MT 2 TAILSTOCK FIXTURE ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Tang has been repaired. See last picture. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
10-12" Atlas Craftsman lathe APRON MITER GEARS
10" OR 12" Atlas OR Craftsman lathe- apron miter gears and shims. No teeth are chipped or broken. The keyway is strong. Comes with 2 shims.
Atlas Craftsman metal lathe saddle cross slide set up for production
Atlas Craftsman metal lathe saddle cross slide set up for production.works freely.do not see any damage or defects Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item ... moreafter it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, please contact me if you have not received your item within 30 days. Please do not ask me to mark items with a lower value or mar
J.H. Williams Knurling Tool -Metal Lathe atlas craftsman southbend logan
J. H. Williams KNURLING TOOL HOLDER for 9" THRU 12" lathes. Shank measures 3/8" wide by 7/8" tall. medium-heavy knurls- Part number O-K TOOL MADE IN USA VERY GOOD CONDITION check my other auctions- I always combine shipping when possible
Vintage Atlas Craftsman Cross Slide Milling Drilling Table / lathe boring table
This is the Atlas X/Y table for use on a drill press. Also sold through Sears and branded as Craftsman. This is not some cheap import x/y table; this is a quality piece of equipment that will allow you to position your work on the drill press to the thousandths of an inch. Works with any drill press that has slots in the table. Such as Atlas, Craftsman, South Bend, Delta, Clausing, Rockwell, Walker Turner or others. It is used and in very good condition. Althought it could use a cleaning. The top is slightly pitted, but is flat and has no chips or gouges except one minor ding on the edge of a t-slot(see picture) The height to the top of the flat surface is 4-3/4" These were made from Atlas lathe parts. So many of the parts are interchangeable with Atlas lathes. The table top is 7" square and has four t-slots. The table top can be ... moreused as a boring table on a 12" or 10" Atlas/ Craftsman lathe. The lower feed travels more than 3" While the upper one travels 4-1/2" that is the travel if you keep the entire slide in contact with the base- you can get more travel if you overhang) The base is 6"x7-1/4" and has 4 long slots for 3/8" bolts or mounting to your drill press table. Both screws are in excellent condition. With smooth travel through the full range of motion. Backlash is about 8 thousandths on each. The handles are in good shape. The graduations on both dials and on the base are in good condition. But the dials need to be cleaned up. These sold for $37.50 in 1952! I pulled the entire unit apart. Cleaned it, oiled all sliding surfaces with Vactra, reassembled and adjusted it. Shipping will be by large flat rate USPS box. Shipping cost includes additional packing materials and labor. Note that the handles will be removed for shipping in order to prevent breaking them. The Fine Print Note that any terms and conditions specified above. Such as local pickup only, supercede conditions in the"fine print" Bidding When you bid on an item. Your bid is your contract. Y
Crotch Center MT#2 for Atlas /Craftsman/South Bend Lathe 2MT
CRAFTSMAN CROTCH CENTER For use with Atlas and Craftsman 12" and 10" lathes or any other with a#2MT taper tailstock 2" diameter. 1" V-slot. No. 2 Morse Taper shank. Marked"CRAFTSMAN MADE IN USA" This used crotch center is in excellent condition-has a few gouges on the end which has no effect on its use as shown in the 3rd photo Please see my other listings I always combine shipping when possible.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e53f445de-0xff-
whole bunch of atlas lathe stuff LOOK!!
this is a bunch of lathe parts and tools there all used but in great shape you will get everything in the pictures. if you have any questions just ask thank you and good luck
2 SOUTH BEND LATHE DRIVE FACE PLATE 10" 9" atlas
2 SOUTH BEND LATHE DRIVE FACE PLATE off 10"south bend lathe
Direct Drive Coupling 141 130 NICE Missing Ball off 6" Atlas 10100 Metal Lathe
Welcome to my site! a 6" Atlas 10100 Metal Lathe Comes exactly as shown. With what is shown. Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Item is in great condition. There are a few small nicks. Which will not affect performance. When we were taking it off, the little"Ball, 1/8" Dia. M6-214" fell out into the dirt, never to be seen again. The spring is still inside. COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase ... morePrice will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 2 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
Belt Tensioner Pulley 560-196 w/ Shaft Assembly for 6" Atlas 10100 Metal Lathe
Welcome to my site! Part Number 560-196 Comes exactly as shown. With what is shown. Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Item is in excellent condition. There are a few small nicks on the edge of the pulley. But this will not affect performance. Shaft is nice and smooth. COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will ... morebe packaged with care and will ship quickly. I always ship out items within 2 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
ATLAS 618 CRAFTSMAN 6" LATHE JACOBS # 6A DRILL CHUCK MT 1 CAP 0 - 1/2"
LOTS OF AUCTIONS ONLINE NOW! Brand Jacobs Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
ATLAS CRAFTSMAN SOUTH BEND LATHE JACOBS #34 DRILL CHUCK+KEY 0-1/2 CAP #2 MT SHK
ATLAS CRAFTSMAN SOUTH BEND LATHE JACOBS#34 DRILL CHUCK+KEY 0-1/2 CAP#2 MT SHK Click to Enlarge Click to Enlarge FINE USED AND SMOOTH WORKING JACOBS#34 0-1/2 CAPACITY DRILL CHUCK WITH KEY AND#2 MORSE TAPER SHANK FITS 9-12 INCH ATLAS CRAFTSMAN LATHES. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
ATLAS CRAFTSMAN LATHE 10 12 COMPOUND SWIVEL SQUARE HEAD SET SCREWS & PINS 10-309
ORIGINAL ATLAS 10/12 INCH LATHE PART NO. 10-309 SQUARE HEAD SET SCREWS& PINS The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
ATLAS CRAFTSMAN 10" METAL LATHE GEAR GUARD 10F-28, includes Thread Chart,
Up for bids is a ATLAS/ Craftsman 10" Lathe Gear Guard. Part no. 10F-28 with thread chart and handle knob, part no. 9-154 and spring, part no. 9-157, in good to great condition. No rust. Paint is chipped in places. Thread chart has a few small scrapes as shown in pictures. A good solid piece. Came from a Atlas 10" H-42, but will fit Atlas 10" TH models. If you have any questions feel free to ask. Buyer pays shipping in the US. Insurance included in calculated shipping price. Thanks for looking and have a great day.
Atlas Craftsman 6” MK II Metal Lathe Bed with Rack
Normal 0 false false false MicrosoftInternetExplorer4 Atlas Craftsman 6” MK II Metal Lathe Bed with Rack. Bed ways look to be in very clean condition.
ORIGINAL ATLAS CRAFTSMAN METAL LATHE 6" DIAMETER DOG FACE PLATE 9-15 344 1-1/2-8
ORIGINAL FACEPLATE FOR ATLAS CRAFTSMAN 10" OR 12" LATHES PART NO. 9-15 1-1/2" 8 TPI- 6" DIAMETER WILL ALSO FIT SOUTH BEND AND LOGAN LATHES WITH 1 1/2" X 8 TPI SPINDLES
Atlas Manual of LATHE Operation and Machinists Tables 30th Ed Clausing Corp
Atlas Manual of LATHE Operation and Machinists Tables 30th Ed Clausing Corp Available for your bids is an EXCELLENT CONDITION SPIRAL BOUND ~ SOFT COVER BOOK. This is the 30th Edition of"MANUAL OF LATHE OPERATION AND MACHINISTS TABLES" It has all 12 tabs and no torn or missing pages. The spiral binding is nice and tight. I find no writing in the book. Be sure to see my other listings for MORE VINTAGE GOODIES and to take ADVANTAGE of COMBINED SHIPPING RATES. Click to Enlarge I use the POST OFFICE and FEDERAL EXPRESS to ship my items. I get LOWER& BETTER RATES using FED EXP(instead of UPS) and pass that savings on to my customers. The heavier items go via Fed Exp unless prior arrangements are made. I DO NOT ship via UPS. E-Bay forces me to list a shipping option for all of my auctions and they do not offer Fed Exp as an option ... morein their shipping calculator. Please e-mail me for an economical. Safe and accurate shipping quote that IS LESS THAN WHAT SHOWS on the SHIPPING CALCULATOR. I will ATUOMATICALLY COMBINE winning auctions when safe to do so. PLEASE WAIT for me to send a personal e-mail detailing your shipping charges prior to making payment(for multiple purchases) as this will help avoid overpayment on your part. PLEASE NOTE: If you select PARCEL POST for your method of shipment it could take as long as 2 weeks for your item to arrive ~ so please be patient. PRIORITY MAIL usually arrives within 2-3 days and FEDERAL EXPRESS GROUND within 3-5 days. Winning bidder to PREPAY shipping and insurance charges- NO handling fees! Payment is expected within 5 days after the auction ends. If you are bidding on auctions that end on different days- please let me know and I will hold off requiring payment until all auctions you are bidding on end. International bidders are ALWAYS WELCOME and are strongly encouraged to request shipping charges PRIOR TO BIDDING as international shipping can be quite costly. On International shipments I can accept Paypal. Reimbursement for lost or damaged ~ insured ~ items will occur
Atlas Th54 metal lathe Knurling tool. Fits Southbend, Clausing, Logan
Atlas Th54 metal lathe Knurling tool. will combine shipping if possible. Thanks for looking. lenth of neck 3 1/2" hight 7/8" width 3/8" wheels are coarse and in mark free condition. Tool is used but in good working condition.
WESTERN BORING TOOL SOUTH BEND LOGAN HARDINGE ATLAS CLAUSING LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand Western Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1 5/16" x 9/16" Shank. 5/8" Max Bar. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
ARMSTRONG LATHE CUT-OFF TOOL HOLDER SOUTH BEND LOGAN HARDINGE ATLAS CLAUSING
LOTS OF AUCTIONS ONLINE NOW! Brand Armstrong Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Shank is a bit shaved. 1" x 7/16" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
FURNAS FOR / REV DRUM SWITCH ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand Furnas Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Was in working order when removed. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
CUTLER HAMMER FOR / REV DRUM SWITCH ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand Cutler Hammer Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Untested. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
4 Lathe wrenches for a chuck south bend atlas machinest items tool room
You are bidding on 4 chuck wrenches. The ends are square; Diameters are one at 3/8.Two at.280 dia. last one is.300 dia. That size is fron flat to flat. Thanks for looking.
USED 6" Lathe Chuck Backplate 1-1/2"- 8 tpi (for South Bend, Atlas Lathe)
This is a used lathe chuck backplate with 1-1/2" 8tpi threads. The locating diameter in the bore is 1.520" The overall diameter is 6.2" It has 3 tapped holes which look to be 5/16" 18. The plate is about 1/2" thick. Not including the part that's already turned down. Shipping will be $5. 4 5 sent Priority mail in the US only. Thanks for looking.
ATLAS 618 CRAFTSMAN 6" LATHE 3 JAW SCROLL CHUCK 4" DIA. 1" x 8 TPI DELTA
LOTS OF AUCTIONS ONLINE NOW! Brand Craftsman Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Craftsman# 383.22970. 4" Dia. 1" x 8 TPI. 4.14 lbs. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Armstrong No 6-32-R lathe Right hand cut off Parting tool for Atlas South Be
Armstrong No 6-32-R Right hand cut off/ Parting tool for Atlas South Bend etc You are bidding on a good working condition lathe tool holder. The threads of the tool and holding bolt are in very nice condition. There are some marks from use. I will let the photos speak for them selves. Please inspect the photographs before you bid. Or ask questions. The time to ask questions is before you bid or win the auction. Powered by The free listing tool. List your items fast and easy and manage your active items.
Atlas Lathe with Starter Kit/Tooling
Atlas single phase lathe with tooling for machining/metalworking. Swing: 10" Distance between centers: 22" Size of Chuck: 5" 3 jaws Through Hole: 3/4" Drive Motor: 120V single phase. 1/2 HP Overall dimensions: 45" L x 30 Deep x 51" high Includes: Power feed chuck key 1/4" tool bit holder knurling tool cutoff tool miscellaneous bits NOT PICTURED but included: New live center for tailstock. Great for garage or home use! `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e5750be53-0xf4-
MACHINIST TOOLS LATHE Starrett Dial Test Indicator Box Case atlas south bend
Starrett Dial Test Indicator in Box Case.
Look atlas craftman 6 inch lathe tell stock Casting and misc parts
Grab bag of misc 6 inch parts. Posted with
Basic Headstock w/ Spindle Back Gear, Spindle, Bolts 6" Atlas 10100 Metal Lathe
Welcome to my site! Headstock Casting. Headstock Spindle. Spindle Back Gear Comes exactly as shown. With what is shown. Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Item is in excellent condition. COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 2 business ... moredays after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
Back Gear 341-375 & Shift Lever 452-063 NICE! off 6" Atlas 10100 Metal Lathe
Welcome to my site! Comes exactly as shown. With what is shown. Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Item is in excellent condition. COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 2 business days after payment is received. I take my shipping ... moreand packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
ATLAS CRAFTSMAN 10 12 LATHE SPLIT NUTS GUIDE PINS STUDS & BOLTS HARDWARE
Nice- Original split nut guide assembly for a 10" or 12" Atlas or a 12" Craftsman lathe. Assembly is clean& solid. Includes original guide with pins, part number 9-13, mounting hardware and split nut studs. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL ATLAS LATHE 6" 3 JAW CHUCK WITH KEY 1 1/2" X 8" TPI
NICE ORIGINAL ATLAS LATHE 6" 3 JAW CHUCK WITH KEY. 1 1/2" X 8" TPI. CHUCK MEASURES 6" ACROSS AND BODY MEASURES 2" IN HEIGHT. JAWS ARE IN NICE CONDITION AS WELL AS SPINDLE THREADS. JAWS MOVE FREELY THROUGHOUT. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
ARMSTRONG TUNGSTEN CARBIDE TOOL HOLDER 4 ATLAS CRAFTSMAN SOUTH BEND METAL LATHE
ARMSTRONG TUNGSTEN CARBIDE TOOL HOLDER FOR ATLAS. CRAFTSMAN OR SOUTH BEND METAL LATHE. ARMSTRONG CHICAGO USA" WRITTEN ON ONE SIDE, NO TO-L ARMSTRONG TUNGSTEN CARBIDE PAT'D TOOL HOLDER" ON THE OTHER SIDE. MEASUREMENTS ARE 3 3/4" SHANK, 3/8" WIDE, AND 7/8" HIGH. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e5f5fc768-0x102-
Atlas MK2 6" lathe with Tooling "Nice"
Very nice original condition Atlas Mk2 lathe with tooling included. This lathe has 6" swing. 21" between centers, weighs about 100 lbs not including motor. Has MT#2 headstock spindle bore with 1"10TPI threads, MT#1 tailstock spindle, Nothing broken or repaired, everything operates very smooth. This lathe package includes Made in England three jaw chuck with extra jaws& key, New tool post with 3/8" tool bit capacity, dead center, New 0-3/8" drill chuck, New spindle sleeve, New drill set, New center drills, New turning tool bits, boring bars, full set of change gears, 110 volt, 1/3 HP motor with switch& belt. This lathe is available for local pickup here at my shop zipcode 65542 or I can break it down and ship it in several boxes for $150 extra. I prefer cash when picked up but will accept Paypal if it is shipped. ... moreIf you have any? about this lathe feel free to call anytime 816-805-1363 Luke
Atlas 10" Lathe Quick Change Gearbox Tumbler Bracket 10-1502
Combined Shipping On Multiple Purchases Whenever Possible! Trader Mike Tools Buys. Sells& Trades almost anything that is legal. We seek out working and non working antique old tools, tooling and attachments along with old garden tractors, walk behind tractors and attachments for them that are no longer available to purchase in todays market. Wood or Metal Working Equipment& Accessories we love everything about them. We dabble in alot of stuff and you just never know what we will horse trade for next. We are located in the state of Michigan and we love to Dicker, Deal, Haggle and just have a good ole time doing it. Contact us if you have any questions about this or any other item we have up for bid Description: Here's a Atlas 10" Lathe Quick Change Gearbox Tumbler Bracket. This is stamped 10-1502 and it is in good used shape. ... morePlease look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work wi
USED LATHE LIVE CENTER WITH #2MT MORSE TAPER - MADE IN JAPAN! - ATLAS LOGAN ENCO
This is a used lathe live center with a#2MT shank. It's in good shape but has some light grooving on the nose(looks worse in the pictures I think) Nice smooth movement. This is not a cheap Chinese import and has loads of life left in it. Don't miss this it as it includes FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending ... moreupon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
ATLAS CRAFTSMAN 10" 12" LATHE 1.5" x 8 SPINDLE, BEARINGS & HARDWARE
The following parts came from a commercial ATLAS lathe with a 10" swing and 54" bed. The model# was OC54 and the serial# was 091651 This is the main 1-1/2" x 8 tpi spindle with bearings. Shields, spacers, take-up nut etc. I have not bothered to clean it all up too much because I wanted the buyer to see it as came off the lathe(they all look good when you clean them up) The bearings felt good when they were on the lathe and they certainly have life left in them. Please look at the pictures to see exactly what is included. Don't miss this one as it includes FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying ... morebidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I wi
South Bend Rocker Tool Post for9" or 10" Lathe,Atlas,Craftsman,South Bend
Offered is a nice South Bend tool post. It is in good used condition. There is no box. The tool post is for a 9" or 10" lathe. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13e62dd7189-0xfc-
ATLAS CRAFTSMAN 10 / 12 " METAL LATHE CHANGE GEAR 56 TOOTH # 9-101-56A Excellent
Up for bids is a ATLAS/ Craftsman 10 In. 12 In. LATHE 56(56A) TOOTH CHANGE GEAR in great condition with no chipped teeth. Very moderate wear. If you have any questions feel free to ask. Buyer pays shipping in the US. Thanks for looking and have a great day.
12" 3 Jaw lathe chuck South Bend Atlas Logan Clausing
12" 3 Jaw lathe chuck.works smooth.center of chuck has been hit with cutting tool and has scars but does not effect function of chuck. to cut the cost of shipping it will be disassembled and shipped in two boxes to meet FRB weight limit. Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make ... moreother arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, plea
ATLAS CRAFTSMAN 10 12 LATHE COMPOUND HEADSTOCK GEARS 16 32 10-101-16A & STUD
Very Nice- Original 16 and 32 tooth compound headstock gear and stud assembly for a 10" Atlas or 12" Craftsman lathe. C ompound gear is part number 10-101-16A. Interior bore diameter is 1/2" Stud is part number 10-47. Assembly also includes screw and washer. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
(3) 3-C SQUARE Collets for 9", 10" Southbend Atlas Craftsman Lathe
Here's a group of(3) used BRAND(germany) 3-C collets for your machine. These are the longer collets(3AT are the shorter ones by about 1/2" I believe both will work on your 3 size collet closer or chuck. These 3 collets are highest quality. Not some import junk. Sizes in this group are: 1/4" 5/16" and 3/8" All in excellent. Near new condition. Each in original styrofoam case. Round out your set. Or start your square collet collection with some top quality pieces. I also have some round 3-C collets on another listing. T E R M S: QUESTIONS: Please ASK QUESTIONS in a timely manner(not an hour before auction ends) WARRANTY: This item is SOLD AS-IS without warranty. No return or refund. Please check my feedback. PAYMENT: PayPal within 3 days of auction end. SALES WITHIN NEW MEXICO are subject to 7% tax. FEEDBACK: You are ... moreencouraged to leave feedback indicating that the transaction has been completed to your satisfaction. I will reciprocate. Despite best efforts. Occasionally an unforseen issue arises. If there is any issue, please allow me the opportunity to work with you to provide a satisfactory resolution prior to leaving feedback of any type. A little communication goes a long way. T E R M S: QUESTIONS: Please ASK QUESTIONS in a timely manner(not an hour before auction ends) WARRANTY: This item is SOLD AS-IS without warranty. No return or refund. Please check my feedback. PAYMENT: PayPal within 3 days of auction end. Please pay promptly so I can ship and deliver quickly. If you need extra time. It's better to give me a heads up in advance. I'm generally agreeable to most requests. SALES WITHIN NEW MEXICO are subject to 7% tax. FEEDBACK: You are encouraged to leave feedback indicating that the transaction has been completed to your satisfaction. I will reciprocate. Despite best efforts. Occasionally an unforseen issue arises. If there is any issue, please allow me the opportunity to work with you to provide a satisfactory resolution prior to leaving feedback of any type. A little comm
(5) 3-C Collets for 9", 10" Southbend Atlas Craftsman Lathe
Here's a group of(5) used Southbend 3-C collets for your machine. These are the longer collets(3AT are the shorter ones by about 1/2" I believe both will work on your 3 size collet closer or chuck. Sizes in this group are: 1/16" 1/8" 1/4" 7/16" 1/2" All in good used condition. Threads and keyways good. Round out your set. Or get some extras in these useful sizes. I also have some near-new square 3-c collets on another listing. T E R M S: QUESTIONS: Please ASK QUESTIONS in a timely manner(not an hour before auction ends) WARRANTY: This item is SOLD AS-IS without warranty. No return or refund. Please check my feedback. PAYMENT: PayPal within 3 days of auction end. SALES WITHIN NEW MEXICO are subject to 7% tax. FEEDBACK: You are encouraged to leave feedback indicating that the transaction has been completed ... moreto your satisfaction. I will reciprocate. Despite best efforts. Occasionally an unforseen issue arises. If there is any issue, please allow me the opportunity to work with you to provide a satisfactory resolution prior to leaving feedback of any type. A little communication goes a long way. T E R M S: QUESTIONS: Please ASK QUESTIONS in a timely manner(not an hour before auction ends) WARRANTY: This item is SOLD AS-IS without warranty. No return or refund. Please check my feedback. PAYMENT: PayPal within 3 days of auction end. Please pay promptly so I can ship and deliver quickly. If you need extra time. It's better to give me a heads up in advance. I'm generally agreeable to most requests. SALES WITHIN NEW MEXICO are subject to 7% tax. FEEDBACK: You are encouraged to leave feedback indicating that the transaction has been completed to your satisfaction. I will reciprocate. Despite best efforts. Occasionally an unforseen issue arises. If there is any issue, please allow me the opportunity to work with you to provide a satisfactory resolution prior to leaving feedback of any type. A little communication goes a long way. SHIPPING: Paid by buyer. Shipping will be $ 7 for anyw
ATLAS 618 CRAFTSMAN 6" LATHE GEAR DOOR / GUARD / COVER WITH CHART
LOTS OF AUCTIONS ONLINE NOW! Brand Atlas Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.